Job Search Results

9 listings were found that matched your search words: Keywords: Company: butler ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2025/05/16 Friday 10:59PM Pacific Time by ContractJobHunter. )

Listings 1 - 9
Go To My Job Tracker

Expand all descriptions

SIL Engineering Technician- MV-75

Description:
SIL Engineering Technician - MV-75
Location: Arlington, TX
Job ID: #71030
Pay Range: $35-45 an hour
6+ month contract

Responsibilities:
*Fabricating interconnecting cables and harnesses based on engineering drawings.
*Performing troubleshooting, maintenance and repair of test bench and lab infrastructure equipment.


-Skills Required:
*Must have the ability to crimp and assemble connector contacts and cable assemblies to aircraft standards.
*Must have the ability to solder to the J-STD.
*Must be able to read and understand aircraft level wiring diagrams.
*Must be able to read and understand mechanical drawings and diagrams for metal fabrication and assemblies.
*Familiar with the use of test equipment, trouble shooting and repair of wiring, and isolation .
*Experience wiring serial data interfaces including ARINC 429, MIL-STD-1553, RS422, RS232, Ethernet, IEEE-488.
*Experience installing fiberoptic cabling for reflective memory hardware.
*Ability to properly use in a safe manner hand tools and shop equipment (Powered and Unpowered – Hand drills, wire crimpers, wire strippers and soldering tools).
*Physical strength – ability to lift up to 75 pounds and work in confined areas for extended periods of time.
*Familiarity of ESD and FOD practices.

-Education:
*Associate Degree in Engineering or equivalent experience preferred
*High School diploma

-Experience:
*Industry: Technical 5 years minimum
*Military experience in related aircraft/systems maintenance and support is a plus
*Must have the ability to attain a clearance, if needed.
*Good communication skills both oral and written.
*Must be a team player


Benefits provided: 401K, medical, dental, and vision, sick time as applicable to state law
Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity and inclusion for the benefit of our employees, our customers, and the communities where we are located. Employment decisions are made without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected
 
Job Number: 71030
Job Location: Arlington, TX
Rate: $35-$45 AN HOUR
Per Diem: NO
Overtime: POSSIBLE
Duration: 6+ MONTHS
Start Date: ASAP
Input Date: 05/15/2025
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Breanna Lashley
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD
City, State: SHELTON, CT 06484
Phone: 203/926-2705
Email: blashley@butler.com
Website: www.butler.com

NC PROGRAMMER

Description:
NC PROGRAMMER- V22
Location: Hurst, Texas
6+ month contract
Pay Range- $40-$70 an hour

***1st shift 7:00am - 3:30pm****
1. Complete the creation and validation of production ready data models and associated functional decompositions, logical decompositions, and traceability.
2. Successfully complete all non-recurring CNC Programming requirements for the Repair and Overhaul Center (ROC) for machining of grips and yokes.
3. Successfully perform auxiliary CAD design for production support in accordance to Repair and Overhaul Center (ROC) requirements.

Experience & Other Requirements:
1.) Two (2) years college and two (2) years of experience or equivalent four (4) years of experience, with preferred courses in:
A.) Math through Trigonometry and Analytical Geometry
B.) Engineering material
C.) Processing Technology
D.) Trained in CADAM, CATIA, and APT programming
E.) Manufacturing methods and procedures
2.) Catia (V6 / 3DX) modeling and surfacing experience
3.) At least two (2) years of NC Programming experience.

Preferred Qualifications:
• Working knowledge of CATIA (V6 / 3DX) NC Programming
• 5-axis CNC NC Programming experience
• 5-axis CNC Probing Programming experience
• Familiarity with Gidding & Lewiws and/or Starrag Heckert 5-Axis machines

1.) Maintains complete documentation of programs to ensure effective process control.
2.) Interrogate, analyze, comprehend, and interpret various Engineering Drawings, Models, Bills of Materials, Technical Specifications, Quality Documents, Bell Process Framework, and departmental procedures as necessary to perform assigned work.
3.) Capable of scheduling several assignments and possesses the skills required to submit reliable cost/hour estimated: capable of directing other individuals work flow with respect to specific programs.
4.) Develops, Creates and Maintains Tooling/Fixture definition for manufacturing operations for all media types including MCAD and manual legacy designs.
5.) Skilled in the concept related to the application of GD&T/Aerospace tolerances.
6.) Responsible for developing, creating, and maintaining Loft MCAD models, flat patterns and associated digital tooling programs.
7.) Executes creation and maintenance of CATIA (V6 / 3DX) programs and operator instructions for Numerical Controlled equipment.
8.) Must have experience with CATIA (V6 / 3DX) and visible on the resume.

Benefits provided: 401K, medical, dental, and vision, sick time as applicable to state law
Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity and inclusion for the benefit of our employees, our customers, and the communities where we are located. Employment decisions are made without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Location: Hurst, TX
Rate: $40-$70 AN HOUR
Per Diem: NO
Overtime: POSSIBLE
Duration: 6+ MONTH CONTRACT
Start Date: ASAP
Input Date: 05/12/2025
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Breanna Lashley
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD
City, State: SHELTON, CT 06484
Phone: 203/926-2705
Email: blashley@butler.com
Website: www.butler.com

Aero Logistics Engineer - FLRAA

Description:
Aero Logistics Engineer - FLRAA

Location: Fort Worth, TX

12 month contract

Job ID: #70988

Pay Range: $30-50




Logistics Product Data
We are looking for inquisitive and driven maintainers with a passion to innovate and influence design. Bring your experience and ideas and help us develop cutting edge concepts for aircraft maintenance. This role will be an integral part of the team, working closely with customers and design engineers. You’ll be able to hone your technical abilities on significant maintenance problems, all while gaining experience in leadership and communication.

The Aerospace Logistics Specialist focuses on the analysis and technical coordination to develop affordable and supportable military systems for FLRAA Program.
-The position is responsible for supporting the development of support systems within the IPTs.
-These support system resources include: Level Of Repair Analysis (LORA), Provisioning/Supply Support, Task/Maintenance Plan Analysis, Interactive Electronic Technical Manuals (IETM), Paper-based manuals, Illustrated Parts Breakdowns (IPB), Support Equipment, PHS&T, and Repair Parts and Special Tool List (RPSTLs), and Industry MIL-STD documents and manuals, which span across multiple aircraft platforms, modifications, and development programs.
-This position focuses on the design of inherent supportability into the analysis and the associated design, analysis, and optimization of the customers' military support system.

Qualifications
-Demonstrates a working knowledge and the requisite skill sets to work within the IPT/organization.
-Performs all assigned tasks to an acceptable quality standard with minimal supervision.
-Compliant to company processes, procedures, and applicable government regulations.
-Support and assist in data preparation and presentation for program reviews and perform other work as directed.
-Perform to a set of performance metrics and measurements that give visibility to cost and schedule objectives.
-HS Diploma (GED) required - Bachelor’s degree preferred
-3+ years of Military aviation experience and/or 5+ years of aviation experience.
-Familiar with SlicWave Logistics Product Data Software
-Understanding of S1000D Publication Specification
-Understanding of GEIA-STD-007
-Must have strong analytical skills
-Must be experienced with the MicroSoft software suite
-Must have excellent communication skills


Benefits provided: 401K, medical, dental, and vision, sick time as applicable to state law
Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity and inclusion for the benefit of our employees, our customers, and the communities where we are located. Employment decisions are made without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 70988
Job Location: Fort Worth, TX
Rate: 30-50 DOE
Per Diem: NO
Duration: 12 month contract
Start Date: ASAP
Input Date: 05/09/2025
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Taylor McIlrath
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD
City, State: SHELTON, CT 06484
Phone: 203/926-2705
Email: tmcilrath@butler.com
Website: www.butler.com

Flight Test Design Engineer

Description:
Min years of experience: 5-13 years
Degree Requirements: BS, Engineering or Engineering Technology
Detailed Job Description:
Join the Flight Test Engineering team working on commercial and military aircraft programs. Develop installations for flight test hardware and wiring. Coordinate with a multi-discipline team to identify solutions.

Requirements
• Must have aerospace installation design experience.
• Must be proficient in CATIA V5. ENOVIA experience a plus.
• Must have experience in 2D drafting. Prefer experience with Model Based Definition (MBD).
• Must have experience in ASME Y14.5 (GD&T).
• Must be proficient in Microsoft Office (Outlook, Excel)
• Good communication skills.
• Good problem solving skills.
 
Job Number: 70983
Job Location: West Lafayette, IN
Per Diem: No
Overtime: Possible
Duration: 12 months
Input Date: 05/08/2025
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Bill Carriveau
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD
City, State: SHELTON, CT 06484
Phone: 203/926-2705
Email: wcarriveau@butler.com
Website: www.butler.com

Project Engineer

Description:
Project Engineer – On-site in Windsor Locks (70952). Ability to facilitate project engineering tasks with limited oversight from a manager required. SAP experience required. Pay range $28-33/hour based on experience.

• US Citizenship or Permanent Resident Required
• Paid Holidays
• Dental
• BC/BS Medical Insurance
• Vision
• Direct Deposit

Send resumes to:
Laura Leszek
Email: lleszek@butler.com
Direct Dial: 765-412-3240
 
Job Number: 70952
Job Location: Windsor Locks, CT
Rate: 28-33
Input Date: 05/07/2025
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: 3495 KENT AVE
City, State: WEST LAFAYETTE, IN 47906
Phone: 765/412-3240
Email: lleszek@butler.com
Website: www.butler.com

Machine Operators

Description:
Machine Operators (70082) – On-site. Long term contract-to-hire opportunities. Ability to set-up and operate all conventional CNC machining equipment required. Pay range $19-24/hour based on experience.

• US Citizenship or Permanent Resident Required
• Paid Holidays
• Dental
• BC/BS Medical Insurance
• Vision
• Direct Deposit

Send resumes to:
Laura Leszek
Email: lleszek@butler.com
Direct Dial: 765-412-3240
 
Job Number: 70082
Job Location: Carroll, IA
Rate: 19-24
Input Date: 05/07/2025
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: 3495 KENT AVE
City, State: WEST LAFAYETTE, IN 47906
Phone: 765/412-3240
Email: lleszek@butler.com
Website: www.butler.com

Site Support Admin & Data Analysis

Description:
Site Support Admin & Data Analysis (70946). Proficiency in MS Office required. Excellent communication and detail oriented required. SAP and supply chain experience preferred. Pay ranging from $28-34/hour.

• US Citizenship or Permanent Resident Required
• Paid Holidays
• Dental
• BC/BS Medical Insurance
• Vision
• Direct Deposit

Send resumes to:
Laura Leszek
Email: lleszek@butler.com
Direct Dial: 765-412-3240
 
Job Number: 70946
Job Location: Remote
Rate: 28-34
Input Date: 05/07/2025
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: 3495 KENT AVE
City, State: WEST LAFAYETTE, IN 47906
Phone: 765/412-3240
Email: lleszek@butler.com
Website: www.butler.com

NC Programmer

Description:
NC Programmer – On-site in Fort Worth (70466). Must have experience with CATIA V6. Pay range $40-70/hour based on experience.

• US Citizenship or Permanent Resident Required
• Paid Holidays
• Dental
• BC/BS Medical Insurance
• Vision
• Direct Deposit

Send resumes to:
Laura Leszek
Email: lleszek@butler.com
Direct Dial: 765-412-3240
 
Job Number: 70466
Job Location: Fort Worth, TX
Rate: 40-70
Input Date: 05/07/2025
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: 3495 KENT AVE
City, State: WEST LAFAYETTE, IN 47906
Phone: 765/412-3240
Email: lleszek@butler.com
Website: www.butler.com

ASIC & FPGA Design Engineer

Description:
Develops, designs, verifies, and documents Application-Specific Integrated Circuits (ASIC) and Field Programmable Gate Arrays (FPGA) development.
Determines architecture design, logic design, and system simulation.
Assignments include the analysis of all aspects from high-level design to synthesis, place and route, and timing and power utilization.
Typically uses specialized equipment to establish operation data, conduct experimental tests, and evaluate results.
Support Circuit card designer with trade studies.
Develop and release design requirement specifications for product.
Support of production environment in debugging and troubleshooting FPGA related issues in a production environment will be a critical component of this particular role.

Required Skills and Experience :

Required Skills and Experience :
- Bachelor of Science or higher from an accredited college in Electrical Engineering or related discipline, or equivalent experience/combined education
- 6+ years of experience in FPGA design with a BS, or 4+ years of experience with an MS
- 4+ years of experience HDL programming experience with VHDL, Verilog, and/or System Verilog
- 4+ years of experience in Hardware-Software Integration and Validation
- 4+ years of experience with FPGA toolsets
 
Job Number: 70965
Job Location: Orlando, FL
Per Diem: No
Overtime: Possible
Duration: 12 months
Input Date: 05/06/2025
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Bill Carriveau
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD
City, State: SHELTON, CT 06484
Phone: 203/926-2705
Email: wcarriveau@butler.com
Website: www.butler.com
Back to Advanced Job Search