Job Search Results

570 listings were found that matched your search words: Keywords: Electrical ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2018/12/15 Saturday 11:41PM Pacific Time by ContractJobHunter. )

Listings 1 - 570

Go To My Job Tracker

Expand all descriptions

1st Shift

Description:
Perform maintenance in support of manufacturing facility on a variety of equipment throughout facility including machinery repairs, preventative maintenance, machine relocation, fabrication, welding, electrical repair and installation, plumbing (air, hydraulic, water) with use of a variety of equipment.  Responsible for monitoring hazardous waste for removal, maintenance of chemical storage area and clean up of chemical spills as required.  Nontoxic or non-hazardous.  Mainly Soap and/or grease
Will be operating a crane or fork lift.
 
Responsibilities:
Provide maintenance support in all areas of manufacturing facility including but not limited to machinery repairs, preventative maintenance, machine relocation, fabrication, welding, electrical repair and installation, plumbing (air, hydraulic, water) with use of a variety of equipment such as hand tools, welding equipment, fork lifts, and precision measuring equipment.  Maintain and develop preventative maintenance program for production related equipment.  Required to perform work in compliance to all safety and EHS policies and procedures. 
 
Qualifications:
  • Knowledge of EHS procedures and policies
  • Knowledge and safe use of production related equipment
  • Working knowledge and use of welding, electrical, and plumbing equipment including repair and maintenance of machinery
  • Millwright Skills and familiar with Electrical and/or Hydraulic
  • Able to interpret OEM handbooks and/or plant diagrams
  • Understanding of reading building plans and electrical schematics
  • Ability to use trouble-shooting and precision measuring equipment
  • Where applicable, trained in maintenance processes such as but not limited to welding, plumbing, electrical and mechanical troubleshooting
  • Vocational or technical training in a maintenance related discipline, strongly preferred

 
Training requirements:

  • Demonstrated ability to comply to maintenance safety procedures such as lock-out tags, etc.
  • Demonstrate ability to safely complete job tasks utilizing manual equipment as well as use of gauges needed for repair fabrication
  • Demonstrate ability to perform preventative maintenance, and repair of facilities equipment
  • Where applicable, complete safety and maintenance training and or certification

 
 
 
 
 

 
Job Number: 1610061453
Job Location: Las Vegas, NV
Duration: 12 months
Input Date: 12/19/2016
Last Updated: 12/14/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Eric Khassanov
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002G2BqAAK&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2231 - ELECTRICAL HARNESS DESIGNER - resume - word doc only

Description:
Produce and deliver Harness Data Reports based on Digital Mock-up and Mentor Graphics.

Integrate the design of the wire harnesses.

Incorporate changes (RFC, PCR) on the harness data reports.

Contribute to the team effort by meeting the team%u2019s objectives for productivity and quality.

Contribute to other relevant tasks needed to support the team%u2019s objectives.

Have a University degree in aircraft avionics or electrical engineering or equivalent work experience in wiring integration.

Have experience with harness manufacturing or methods.

Have a minimum of 5 years of relevant working experience in aerospace.

Have wiring design, wiring installation and/or wiring troubleshooting experience.

Mentor Graphics Harness XC tool knowledge is the primary requirement.

Also have experience with Catia V5.

Have a strong sense of responsibility and have good organization skills.

Must have excellent communication skills including the ability to read/write in English.

Are comfortable working with MS office suite.

Are familiar with BM%u2019s, RAE documents and BAPS related to harnesses.

Communicate clearly and openly with your team.

Embrace changes and new ideas.

Are persistent to reach your goals.

Seek out and accept feedback.
 
Job Number: 2231
Job Location: Montreal, Canada
Rate: 61.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 07/27/2017
Last Updated: 01/26/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2304 - AVIONICS SYSTEMS ENGINEER - cv. word doc only

Description:
Support of Compliance to Certification Authority; author Certification Plans

Provide specialist advice relating to test methods and procedures

Review testing readiness and conformities of assigned systems

Review qualification, ground and flight test data of assigned systems

Review flight test reports containing data demonstrating proper system operation as required by Certification Authorities Regulations

Review and Sign flight release documentation (including safety of flight judgments)

Review system performance analysis to ensure proper compliance to regulations

Coordinate with other Certification Authority Delegates for integrated functions (ie, Human Factor, Pilots, et al)

May provide technical leadership to a small engineering team for dedicated technical investigation / test.

Bachelor's degree in Avionics / Electrical/ Aerospace Engineering, plus 12-15 years' experience in Avionics systems design and certification.

Able to obtain a Certification Authority Delegation for assigned systems

Working knowledge of Rockwell Collins Proline 21 or Fusion Avionics Systems would be advantageous.

Must have excellent communication skills in English - both written and oral and be PC literate.

Experience in flight-testing of civil aircraft; and knowledge of TCCA, FAA, and EASA certification requirements (ie, FAA CFR Part 25) required.

Mirabel is just outside Montreal, Canada.
 
Job Number: 2304
Job Location: Montreal/Mirabel, Canada
Rate: $63.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 12/03/2017
Last Updated: 04/11/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2311 - LIAISON ENGINEER - MRB - cv, word doc only

Description:
Disposition documentation to resolve fit, form or functional issues on A/C components.

Support to Production, Design Engineering, Procurement & Quality in coordinating resolutions to issues.

Review & trouble shooting of Aircraft Systems in conjunction with Design Engineering as required.

Review & disposition of Aircraft Wiring & Electrical issues in conjunction with Design Engineering as required.

Corrective Action requests involving Engineering as required.

Obtain & Interface with Design Engineering experts on appropriate issue resolution.

Interpret engineering drawings, specs & provide guidance to junior employees.

Provide status, updates & keep current on information regarding manufacturing changes & problems.

Have formal education to degree level in mechanical/aerospace engineering or related field.

Have minimum of ten years MRB experience or design experience in Aerospace.

Have good knowledge of aircraft structure & system installation technical requirements, aircraft materials and hardware, standards and specifications, and Electrical & Systems experience would be considered an asset.

Have excellent communication and interpersonal skills, a high sense of commitment, and a willingness to accept responsibilities while acting independently in a high-pressure partner/supplier team environment.

Have previous CATIA, Design and MRB experience including support to production would be considered an asset.

Have previous experience as a Mentor and Coach in either Liaison team environment or working with problem solving teams is an asset.
 
Job Number: 2311
Job Location: Toronto, Canada
Rate: 60.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 12/19/2017
Last Updated: 02/09/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Advanced Engineering Technician 1

Description:
A Fortune 500 and worldwide leader in business aviation; specializing in Command and Control, Communications Networking, Rugged Computing, Information Assurance and Cyber Defense is searching for the right talent to fill this opportunity:

Advanced Engineering Technician 1
(U.S. Citizenship Required*)
Scottsdale, AZ
2017-5119

Responsibilities:
• Support engineering activities such as design, test, check-out, modification, fabrication and assembly of prototype electro-mechanical systems, experimental design circuitry, laser/light transmission devices or specialized test equipment
• Frequently contact individuals representing other departments or outside organizations
• Perform a variety of equipment/process operations involving an application or technical skills in a specific area (electrical, software, manufacturing, etc.)
• Interpret basic engineering drawings, diagrams and schematics
• Construct, modify, debug, troubleshoot, calibrate, test, and adjust a variety of tools, equipment and systems
• Conduct, analyze, and document statistically based experiments to define process parameters
• Organize, analyze, and interpret data to identify cause/effect relationships and recommends resolution/process improvement
• Implement and document complex solutions for process improvement
• Design and construct basic tooling and fixtures to accomplish unique tasks
• Perform complex troubleshooting to the component level
• Work with Engineering and Operations Support
• Work from schematics, diagrams, written and verbal descriptions, layouts or defined plans to perform testing, checkout and trouble-shooting functions
• Handle unexpected demands and adapt to new situations
• Perform operational test and fault isolation on systems and equipment
• Assist determining methods or actions to remedy malfunctions
• Assist design, construction, test and check-out of test equipment
• Use manufacturing, test, development, or diagnostic equipment, including test programs, oscilloscopes, signal generators, and specialized test apparatus
• Analyze results and implement procedures for problems
• May develop test specifications and procedures
• May prepare reports, documentation/specifications as required

Qualifications:
• Required – Top Secret security clearance
• Considerable knowledge and proficiency in the use of fabrication tools
• Able to fabricate complex hardware
• Able to use computers and software applications to assist in job execution
• Influential with others; demonstrates superior communication and collaborative skills

*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Associate’s degree in related discipline or equivalent is required plus a minimum of 3 years of relevant experience.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!

TO APPLY PLEASE VISIT OUR WEBSITE: https://careers-moseleytechnical.icims.com/jobs/5119/adv-engineering-tech-1/job?mode=view
 
Job Number: 2017-5119
Job Location: Scottsdale, AZ
Duration: 24 Months
Input Date: 12/29/2017
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Bob Jones
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer / no clearance / Flight Control and Vehicle Management System skills a requirement CA

Description:
Requirement #AERO-REQ-0710
Work Location Palmdale, CA (1011 Lockheed Way)
Work Week 9/80

Needed Date 11/28/2017
End Date 11/09/2018
Number of Resources 1
No Clearance

Flight Control and Vehicle Management System skills a requirement

Title: Aeronautical Engineer

Description

Candidate will contribute to aircraft FC&VMS (Flight Controls & Vehicle Management System) design, configuration development, feasibility and risk analyses, and technology maturation plans, define, develop, analyze and coordinate FC&VMS requirements with other flight sciences disciplines including ground and flight test, reliability & maintainability, system safety, and other personnel. Develop models and simulations as needed for design and analysis. Perform trade studies and define preliminary requirements for VMS architecture components. Design mechanical and electrical/electronic interfaces to support system integration and test. Define high level software requirements and flow down requirements to procurement specifications. Tasks may also include management of selected vendors, including verification of requirements. The candidate will support system/software verification and validation effort and customer reviews during all phases of system development. The candidate will develop and support integration and system check out (SCO) procedures on flight test article and support pre-flight and post-flight analysis and reviews

Skill/Experience/Education

Mandatory:

Hardware and software integration experience Familiarity with Flight Controls and Vehicle Management Systems Demonstrated ability coordinating with systems engineering, hardware designers and subsystems
Desired:

B.S. Degree or above in an Engineering Discipline
Several years of hardware & laboratory experience MATLAB, Simulink experience


Interview Required Yes
OT Allowed Yes (OT Limitation: No)
Travel No
Non-Exempt
Rate Type Per Hour

Rates
0-4 Yrs Pay Rate: 65.00 USD
5-8 Yrs Pay Rate: 70.00 USD
9+ Yrs Pay Rate: 75.00 USD
 
Job Number: JE-0710
Job Location: Palmdale, CA
Rate: 65-75/hr DOE
Duration: 12 month contract
Input Date: 01/16/2018
Last Updated: 02/06/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Design Engineer II

Description:
Essential Functions and Key Responsibilities:
Develops solutions to a variety of moderate complexity or unusual engineering or technical problems or assignments requiring judgment and ingenuity to work within engineering protocols in the analysis, design and/or repair development of aircraft structures, power plant component parts, mechanical and electrical systems/structures and subsystems for commercial, military, executive, general aviation, or special purpose applications on operational aircraft.

Analyzes and interprets engineering proposals and documentation such as drawings, material and product specifications, structural repair manuals (SRMs), component maintenance manuals (CMMs) and illustrated parts lists (IPLs/IPCs) to develop design and/or repair schemes approaches. Confers with management to clarify or resolve problems.

Designs and develops and/or repairs of structural, power plant and other operational and structural components that are used in operating aircraft. This includes producing or assisting in the production of computer aided drawings and engineering reports.

Develops design and/or repair data packages and obtains FAA approvals through internal and external FAA Designated Engineering Representatives (DERs); troubleshoot failure modes, communicate and interact with customer engineering groups and/or internal personnel for design, development and/or cost effective repair schemes and approvals.

Designs and develops analytical programs concerned with ground or flight testing, or development of acoustic, thermodynamic, or propulsion systems.

Tests models, prototypes, subassemblies, or production items to study and evaluate operational characteristics and effects of stress imposed during actual or simulated operational conditions.

Ancillary Functions and Responsibilities:

Performs other duties as required. These duties may include assignments in job classifications other than the primary assignment.


JOB QUALIFICATIONS:

Experience may be substituted for the formal education and training requirements in this section at the discretion of management. Technical Bachelor level degree in Engineering or the sciences or equivalent and three (3) to six (6) years related experience and/or training; or equivalent combination of education and experience.
CATIA and SAP experience preferred, knowledge of FAA/PMA and FAR's, GDT and blue print reading, advanced technical writing skills required.
 
Job Number: 13920
Job Location: Tulsa, OK
Rate: 35
Per Diem: possible
Overtime: possible
Duration: LT
Start Date: ASAP
Input Date: 12/28/2017
Firm Name: APA SERVICES
Attention: Lisa
Address: 4150 INTERNATIONAL PLZ STE 510
City, State: FORT WORTH, TX 76109
800 Phone: 888/272-7868
Fax Phone: 800/285-8805
Website: www.apaservices.net

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Applications Engineer Vice Installation

Description:
UNIQUE SKILLS
Candidate must have In depth knowledge of electrical harness installation and design guidance documentation (AC 43.13B, SAE AS50881, AC1701-1); In-depth knowledge of FAR 25 sub part H (EWIS) design requirements; Knowledge of EWIS component qualification requirements and documentation (EIA 364, MIL-DTL-38999, MIL-DTL-50151); Extensive knowledge of EWIS component selection criteria; experience with Mentor Graphics Capital Harness System (CHS) preferred Education/Experience: Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs. in the specific technical discipline or 10 yrs. broad engineering experience in several technical disciplines with Bachelors, or 3 yrs. in the specific technical discipline with Masters, or 1 yr. in the specific technical discipline with PhD. Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the production of Client products and services.

PRINCIPAL DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

ADDITIONAL FUNCTIONS
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

OTHER REQUIREMENTS
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 17-785-100301
Job Location: Southeast
Rate: $58.00 to $63.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 01/29/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

Aviation Mechanics - Clearance

Description:
Seeking Experienced Aviation Mechanics for a contract opportunity in San Antonio, Texas!

Work to be performed on a VIP aircraft, 747 platform and active Top Secret Clearance Required.
Several Openings For:
  • General Mechanic
  • Electrical
  • Structures
  • Avionics Tech
  • Quality Inspection
  • Supply Chain Specialist


Great Opportunity for Ex-military/Exiting Military/ and Veterans
Previous military experience a plus!


 
Experience performing routine maintenance, modifications, and rework on VIP - 747 aircraft.
Required- Minimum of 5 years' experience working on 747 platform.
Tools: no tools required
Location: San Antonio, Texas

***Current Security Top Secret Clearance required
US Citizenship Required: Clearance requirements will be used during resume screening. Individuals must hold a current Clearance or Equivalent Clearance/ investigation type to be considered for this position, clearance level must be noted on the resume. Must follow submittal procedures below for consideration. No phone calls please, only candidates that provide resumes with the job ID number will be contacted and considered for the opportunity.

**submittal must reference Job ID number 1710063637

Camille Zunker- czunker@pdstech.com
 
Job Number: 1710063637
Job Location: San Antonio, TX
Duration: 12 months
Input Date: 02/27/2017
Last Updated: 12/14/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Camille Zunker
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002GBZ0AAO&URLSource=cjhunter

Avionics Electrical Engineers

Description:
Jets experience a plus
 
Job Location: Southeast
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: jmac@advancedtechno.com
Website: www.advancedtechno.com

Avionics Electrical Engineers

Description:
Jets experience a plus
 
Job Location: Midwest
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: jmac@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics/Electrical Contractor (Custom Engineering)

Description:
Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of products and services

Unique Skills:
• Must be proficient at creating design and compliance data to support after-market installations on all company models.
• Must understand FAA/ODA/Industry requirements associated with aircraft modifications.

Education and Experience Requirements:
• Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Essential Functions:
• Contributes to planning, developing and coordinating of important engineering projects
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
• Acts as liaison with representatives outside of the assigned group/area
• Actively works to improve daily processes and ensures all work meets customer requirements
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
 
Job Number: 24-213
Job Location: Savannah, GA
Rate: $50 - $55
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 05/03/2018
Last Updated: 08/06/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics/Electrical Contractor (Custom Engineering) TS1

Description:
Avionics/Electrical Contractor (Custom Engineering) TS1

Location: Savannah, GA
Pay Rate: $58/hr - $63/hr
Duration: Long Term W2 Contract
Shift: First

Unique Skills:
Must be proficient at creating design and compliance data to support after market installations on all Company aircraft models. Must understand FAA/ODA/Industry requirements associated with aircraft modifications.

Education and Experience Requirements:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

Principal Duties and Responsibilities/Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 8220
Job Location: Savannah, GA
Rate: 58.00-63.00
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/27/2017
Last Updated: 02/19/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Cabin Safety Engineer V&V

Description:
Velocity’s client, an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM’s, is seeking multiple Cabin Safety Engineers. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.
Seeking contract engineers to join the team in Seattle with at least five years’ experience with cabin safety engineering, to include:
• Experience and knowledge of FDMS & Water Waste Interior Systems (OEM level preferred)
• Experience with requirements writing at aircraft/systems level
• Experience validating requirements (completeness and correctness) and developing verification matrix (plan and results)
• Familiar with requirements definition, traceability, validation and verification process.
• ARP4754A knowledge and experience
• Proficient at DOORS or similar requirement management tool.
Essential functions:
• System requirements verification and validation.
• Flight test and ground test specifications.
• Support flight test and ground test activities.
• Analyze test data and evaluate system operation.
• Prepare test reports.
Desired Qualifications:
• Experience with FAA Part 25 or Part 23 certification, flight and ground test activities.
• Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
• A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
• Ability to represent the client professionally and positively during client interactions and meetings.
• Bachelor degree in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
 
Job Location: Moses Lake, WA
Start Date: ASAP
Input Date: 12/28/2017
Last Updated: 01/23/2018
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Completions Electrical Design Engineer

Description:
• Experience with Aircraft Cabin Interiors and Systems to include but not limited to: Cabin Management System, Cabin Entertainment System, Cabin Lighting, Cabin Switch Controls, Telephone System, Satellite communications, Water System, Waste System, EWIS, Cabin interior monuments and Seats
• Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Essential Functions:
• Contributes to planning, developing and coordinating of important engineering projects
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
• Acts as liaison with representatives outside of the assigned group/area.
 
Job Number: 24-183
Job Location: Savannah, GA
Rate: $58 - $63
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 09/20/2017
Last Updated: 02/06/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Controls Engineer

Description:
Description:
Designs, supports, performs, and manages a controls function for a larger mechanical or electrical system, which applies control theory to design systems with desired behaviors. Majority of work is for test stands built and operated by Ground Test.

Requirements:
A good understanding of hydraulic systems. Candidate will be asked to work with technicians and other engineers to assemble new systems.
Troubleshoot existing systems and develop design modifications as required achieve performance goals.
Experience with MTS Systems FlexTest Controllers and Programmable Logic Controllers (PLC's) is required.

Education:
Bachelor degree in Electrical or Mechanical Engineering
5+ years of related experience
Experiencing manipulating PLC’s.
 
Job Number: 52948
Job Location: Stratford, CT
Rate: 58.75
Per Diem: Split
Overtime: Yes
Duration: 18 mos.
Start Date: ASAP
Input Date: 12/20/2017
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Eric Ellis
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Checker

Description:
1. Review 3D engineering data for conformance to requirements as directed.
2. Check parts for fit, form and function to the extent that information is available.
3. Must have experience in Product Lifecycle Management (PLM) processes and tools, checking CATIA v5 , SmarTeam, as well as other CAD datasets, in accordance to requirements as directed.

Checkers are responsible for determining the acceptability of data in the following areas:
1. Accuracy and completeness of engineering product definition data, including CAD and PDM data.
2. Proper application and compliance with all Engineering and customer drawing requirements.
3. Use and understanding of GD & T a must.
4. Dimensioning and tolerancing including familiarity with ASME Y14.5.
5. Application of best drafting and design practices and procedures.
6. Applies extensive and diversified knowledge of industry fabrication practices for aircraft parts.
7. Advise Design personnel regarding company drawing and design practices and procedures.
8. Maintain a current and up-to-date knowledge of developments in the structures/systems design disciplines drawing/data requirements, as well as all interrelated disciplines of design build teams.
9. Assist in the research and development of Product Data Management (PDM)/Computer Aided Design (CAD) applications and methodologies for Engineering and when necessary, other departments.
10. Actively works to improve daily processes and ensure that all Data Integrity work and CAD and PDM solutions meet customer requirements.
11. Knowledge of company parts list & PdocM, a plus.
12. Knowledge of CHS, EWIS, Electrical harness Design a plus but not required.

Essential Duties and Responsibilities
1. Checks designs of complex mechanical aircraft interior furnishing, structures, and/or systems.
2. Ensures designs meet customer criteria, quality standards and FAA requirements.
3. Adheres to budget and project schedules.
4. Provides design guidance and feedback to other engineering personnel.
5. Other duties as assigned.
6. Knowledge of industry design and documentation standards.
7. Experience with mechanical assemblies and manufacturing technique design.
8. Ability to work independently and cross-functionally.
9. Experience in communicating with employees/teams in productive and efficient manner. • Strong communication and problem-solving skills.
10. Knowledge of Excel, Share Point software, Microsoft Office a plus

Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 5 ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.
 
Job Number: 24-191
Job Location: Savannah, GA
Rate: $50.00 - $55.00
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 09/25/2017
Last Updated: 02/06/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer

Description:
Design Engineer

Independence, OH
1 Year Contract
$50.00-60.00/Hr

Summary: Reporting to the Design Lead, the successful candidate will be responsible for supporting detail design and drawing release in support of initial production. Model Based Definition (MBD) drawings shall be compatible with UTAS Landing Systems design methodologies, customer and industry/regulatory requirements and standard practices. The successful candidate will conduct trade studies, generate layouts, perform tolerance stack-ups, and detailed part design and formal drawing release.

Required Qualifications:
• BS in Mechanical or Aerospace Engineering with 8+ years of design experience with a background in mechanisms and hydraulics in aerospace field with work experience with electrical and hydraulic systems routings
• Minimum of 8 years of experience within the Aerospace industry; must include extensive experience in New Product Development of transport and / or military type aircraft components and assemblies . Knowledge of industry standard practices for systems routings. Understanding of requirements management and verification. Understanding of decomposition of system requirements and development of sub-system requirements. Understanding of qualification requirements electrical and hydraulic equipment. CATIA V5 - model based definition (FTA), kinematics, functional tolerance and annotation and drafting / interoperability. Working knowledge of Engineering PDM systems. In-depth knowledge of MS programs (Word, Excel, Project, PPT). Strong communication skills capable of engaging and working directly with suppliers. US citizen, permanent resident alien or able to review all export-controlled technical information. Experience with GD&T (ASME Y14.5) and familiar with ASME Y14.100 and Y14.41 Experience with Matrix One and SmarTeam PDM systems Working knowledge of materials and surface treatments Proficient with MS Word, Excel, and PPT
• Demonstrated ability to utilize Catia V5 with strong emphasis on functional tolerance and annotation module
• Strong interpersonal skills with demonstrated ability to maintain good working relationships with internal and external customers
• Successful candidates must meet all requirements under ITAR & CCGP
• Possess UTAS-LS Enterprise Values including Ethical Behavior, Customer Focused Improvement, Accountability & Teamwork and Openness & Trust
 
Job Number: 8266
Job Location: Indendence, OH
Rate: 50.00-60.00/Hr
Per Diem: No
Overtime: Possible
Duration: 1 Year
Start Date: ASAP
Input Date: 11/15/2017
Last Updated: 02/05/2018
Firm Name: INCONEN CORPORATION
Attention: Brad
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Support and Training - Instructor - Tech Spec II

Description:
UNIQUE SKILLS
CATIA v5 experienced with 5000+ hours. All Level 1 tools CATIA v5 (Part Design, Assembly, Drafting). Level 2 tools CATIA v5 Generative Surfacing, Free Style Shaping, Generative Sheetmetal, Generative Stress Analysis. Other tools: CATIA v5 Composites, Electrical EHI, Capitol Harness, Tubing experience a plus. Quantitative experience with Geometric Dimensioning and Tolerances a plus. Experience working within PDM systems such as Enovia, SmarTeam or NX/Teamcenter. Formal Classroom instruction experience required for CATIA and PDM.

EDUCATION AND EXPERIENCE REQUIREMENTS
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 10 yrs. in specific technical discipline or 15 yrs. broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs. for Masters and 4 yrs. for PhD in fields applicable to this job.

POSITION PURPOSE
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of client products and services

PRINCIPAL DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

ADDITIONAL FUNCTIONS
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
2. Performs other duties as assigned

OTHER REQUIREMENTS
1. Advanced degree in engineering, or related curriculum preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 17-758-82041
Job Location: Southeast
Rate: $60.00 to $62.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 02/28/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

EHI Engineers

Description:
Develop electrical wiring interconnect system (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wire harness assemblies, utilizing CATIA V5 Electrical and Sheet Metal Work Benches. Capable of interfacing with wiring diagrams, system, and EMI/EMC requirements. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements.
 
Job Location: Savannah, GA
Input Date: 07/07/2014
Firm Name: INCONEN CORPORATION
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: cathy@inconen.com
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical (EWIS) Engineer

Description:
Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Duration: Long Term Contract
Shift: 1st Shift


Unique Skills:
Develop electrical wiring interconnect system (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wire harness assemblies, utilizing CATIA V5 Electrical and Sheet Metal Work Benches. Capable of interfacing with wiring diagrams, systems, and EMI/EMC requirements. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements.
• Aerospace Experience is required
• Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required
• Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative
• Knowledge of Catia V5 Electrical is required

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

Principle Duties and Responsibilities:
Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7977
Job Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 03/21/2018
Last Updated: 06/11/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical (EWIS) Engineer-TS II

Description:
Electrical (EWIS) Engineer-TS II
Savannah, GA
Rate: $70-$77

Unique Skills:

Develop electrical wiring interconnect systems (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wiring diagrams, cable/wire harness assemblies, and rack/panel designs from electrical system schematics adhering to EWIS requirements. Select qualified electrical components such as connectors, backshells, and other parts. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements. • Aerospace Experience is required • Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required • Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative • Knowledge of Mentor Graphics Capital Harness Systems (CHS) is strongly desired


Education and Experience Requirements:

Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.


Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

Principle Duties and Responsibilities:

Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7976
Job Location: Savannah, GA
Rate: $70-$77
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 09/27/2017
Last Updated: 02/05/2018
Firm Name: INCONEN CORPORATION
Attention: Cathy O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Applications Engineering

Description:
UNIQUE SKILLS
Experience with Autocad required. Aerospace experience required. Experience or knowledge of electrical connectors, backshells, shielding, wiring and electrical connectivity is required. Be Familiar with CFR 14 Part 25 and AS50881. Candidate must be able to create wiring diagrams and schematics to include the selection of qualified electrical components such as connectors, backshells and other electrical parts. Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required. Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project.

JOB DESCRIPTION
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs. in the specific technical discipline or 10 yrs. broad engineering experience in several technical disciplines with Bachelors, or 3 yrs. in the specific technical discipline with Masters, or 1 yr. in the specific technical discipline with PhD. Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

PRINCIPAL DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

ADDITIONAL FUNCTIONS
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

OTHER REQUIREMENTS
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 17-736-93664
Job Location: Southeast
Rate: $58.00 to $63.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 03/21/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

Electrical Applications Engineers

Description:
Develop electrical wiring interconnect systems (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wiring diagrams, cable/wire harness assemblies, and rack/panel designs from electrical system schematics adhering to EWIS requirements. Select qualified electrical components such as connectors, backshells, and other parts. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements. Mentor L-Cable
 
Job Location: Savannah, GA
Input Date: 07/07/2014
Firm Name: INCONEN CORPORATION
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: cathy@inconen.com
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Electrical Design Engineer - Pacific NW - Contract

Description:
Keltia Design in Everett, is a technical support services company supplying technical recruiting, CAD training, and engineering design services to customers in the Aerospace industry on a permanent or contractual basis. We have been providing these services for over 18 years.

We have a client in the Pacific NW seeking an Aircraft Electrical Design Engineer for a potentially long term assignment

JOB RESPONSIBILITIES
Applies standard engineering techniques involving innovations of methodology to provide solutions to problems involving a limited number of variables. Experience on Airbus type Aircraft preferred.

Performs low to medium complex circuit/wiring design activities including electrical load analysis and subsequently, prepares appropriate validation and verification means.

Supports product certification/qualification with subject matter knowledge and exercise professional judgment whilst supporting other business functions.

Typically focuses on existing products or processes.
Liaises with drafters, technicians, and others to contribute to project completion.

Coordinates work with other engineers and operating groups to facilitate participation of various organizational units.
· Performs other related duties as required.

MINIMUM REQUIREMENTS
Bachelor's degree in Electrical Engineering from an accredited four-year college or university; and a minimum of 10 years related professional experience and/or training; alternatively, an equivalent combination of education and experience.

If interested please include your desired rate, availability, and your resume in a word.doc format.

Thank you
 
Job Number: KEL090918
Job Location: Pacific NW
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 6mo+
Start Date: ASAP
Input Date: 09/10/2018
Firm Name: KELTIA DESIGN INC
Attention: Mary
Address: 2615 W CASINO RD UNIT 1A
City, State: EVERETT, WA 98204
Phone: 206/368-9812
Fax Phone: 206/237-8950
Website: www.keltia-design.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design and Cabin Management Eng Contractor TS II

Description:
UNIQUE SKILLS
Experience in engineering design of electrical systems that are part of and support aircraft interiors. This includes entertainment, power, lighting, cabin management and communication systems. Experience in creating wiring diagrams, schematics, wire harness drawings, electrical installation drawings and completing supporting analysis/calculations (e.g. voltage drop) AutoCAD, CATIA V5 and SmarTeam experience preferred Take ownership of deliverables produced & their quality. Coordination with the other Engineering disciplines, client and vendors. Experience with leadership/program management on a design program. Take lead role in the process of preparation of design deliverables to ensure appropriate checking & review of all documents / drawings before release.

EDUCATION AND EXPERIENCE REQUIREMENTS
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs. in specific technical discipline or 15 yrs. broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs. for Masters and 4 yrs. for PhD in fields applicable to this job.


POSITION PURPOSE
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of client products and services

PRINCIPLE DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

ADDITIONAL FUNCTIONS
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

OTHER REQUIREMENTS
1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 17-776-111061
Job Location: Southeast
Rate: $65.00 to $70.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 03/21/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design and Cabin Management Engineer

Description:
Electrical Design and Cabin Management Engineer

Location: Savannah, GA
Pay Rate: $65/hr - $70/hr
Duration: Long Term Contract
Shift: First

Unique Skills:
-Experience in engineering design of electrical systems that are part of and support aircraft interiors.
-This includes entertainment, power, lighting, cabin management and communication systems.
-Experience in creating wiring diagrams, schematics, wire harness drawings, electrical installation drawings and completing supporting analysis/calculations (e.g. voltage drop)
-AutoCAD, CATIA V5 and SmarTeam experience preferred.
-Take ownership of deliverables produced & their quality.
-Coordination with the other Engineering disciplines, client and vendors.
-Experience with leadership/program management on a design program.
-Take lead role in the process of preparation of design deliverables to ensure appropriate checking & review of all documents / drawings before release.

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Company products and services

Principle Duties and Responsibilities/Essential Functions:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.
Other Requirements:
1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 7764
Job Location: Savannah, GA
Rate: 65-70
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 08/15/2017
Last Updated: 02/14/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical EWIS Eng w/Catia V5 - TS II

Description:
UNIQUE SKILLS
Develop electrical wiring interconnect system (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wire harness assemblies, utilizing CATIA V5 Electrical and Sheet Metal Work Benches. Capable of interfacing with wiring diagrams, systems, and EMI/EMC requirements. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements. • Aerospace Experience is required • Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required • Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative • Knowledge of Catia V5 Electrical is required

EDUCATION AND EXPERIENCE REQUIREMENTS
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

POSITION PURPOSE
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of client products and services

PRINCIPLE DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

ADDITIONAL FUNCTIONS
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

OTHER REQUIREMENTS
1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 17-795-116742
Job Location: Southeast
Rate: $58.00 to $63.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 01/29/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical EWIS Engineer/ Electrical Apps

Description:
Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services

Unique Skills:
• Develop electrical wiring interconnect systems (EWIS), capable of resolving all technical issues relating to EWIS.
• Produce and maintain wiring diagrams, cable/wire harness assemblies, and rack/panel designs from electrical system schematics adhering to EWIS requirements.
• Select qualified electrical components such as connectors, backshells, and other parts.
• Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements
• Aerospace Experience is required
• Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required
• Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative
• Knowledge of Mentor Graphics Capital Harness Systems (CHS) is strongly desired

Education and Experience Requirements:
• Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required.
• 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.



Essential Functions:
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Is consulted extensively by associates and others as a recognized authority within the field
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
• Approach to problem solving balances technical product, cost and schedule
• Works without appreciable direction; work is reviewed from a long-range perspective for desired results
• Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
 
Job Number: 24-204
Job Location: Savannah, GA
Rate: $58 - $63
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 02/22/2018
Last Updated: 03/19/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical EWIS Eng wCatia V5 - TS II

Description:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

Unique Skills:
• EWIS knowledge. Wire Harness Routing. Wire Harness Installation. CATIA V5 Electrical Workbench.

Education and Experience Requirements:
• Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.


Principal Duties and Responsibilities:
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Is consulted extensively by associates and others as a recognized authority within the field
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
• Approach to problem solving balances technical product, cost and schedule
• Works without appreciable direction; work is reviewed from a long-range perspective for desired results
• Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
 
Job Number: 24-256
Job Location: Savannah, GA
Rate: $60 - $67
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 05/17/2018
Last Updated: 06/22/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
•Location; Midwest Oklahoma
•Must have a Bachelors in Engineering
•DOD Clearance is NOT required
•This position will support our Air Traffic Control and Landing Systems (ATCALS) and B-1 customers, by solving electrical sustainment issues. The sustainment projects address obsolete components in multiple instrumentation, control, power, electronic, electro-mechanical interface systems. The engineer will work under the direction of a lead engineer to:
• Provide technical solutions and make improvements or modification to produce the desired results
• Develop technical documentation and publications relating to users, systems, processes, work flows, operations, products, and services.
• Create new electrical schematics
• Ensure proper system artwork generation
• Implement design changes of existing components
• Write engineering change orders

Additional Details:
•Candidates must be a U.S. Citizen
•Full Time – Non Exempt
•Ensure candidate experience relates to that provided in job description and experience is clearly identifiable on resume for client review
•Opportunity for contract-to-hire based on worker performance, worker attendance and dependability and client business needs.
•Start date will be moved up as needed in order for selected candidate to start ASAP once on-boarding is completed/clear and final clearance is obtained.
•Be sure your candidates are available to start right away once on-boarding is complete.
•Worker will utilize DelTek for weekly time reporting. It is imperative that the registration is completed as soon as possible after receipt of registration invitation. Your attention to this process will eliminate delays in receipt of worker hours and invoice creation.
•There is a chance for some OT (overtime) as needed and must be approved by KBRwyle supervisor
•Client manager will conduct phone and in-person interview.
 
Job Location: Midwest, OK
Rate: $29-32
Overtime: Possible
Duration: Full Time – Non Exempt
Start Date: ASAP
Input Date: 01/17/2018
Last Updated: 01/29/2018
Firm Name: MIDCOM CORPORATION
Attention: Juan Johnson
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
SUMMARY
Performs a variety of engineering work including design, analysis, substantiation, certification, drawing interpretation and project management as related to transport category aircraft.

ESSENTIAL DUTIES AND RESPONSIBILITIES
Create step by step work instructions for the removal and installation of hardware and components as they relate to aircraft structures, systems, interiors and avionics. Troubleshooting of noted aircraft systems Repair, design and analysis of metal, composite and metal bond structures Knowledge of the Federal Aviation Regulations FARs from Title 14 of the Code of Federal Regulations as they apply to transport category aircraft. Knowledge of cabin specific regulatory requirements, including flammability and crashworthiness as examples Familiarity with the Supplemental Type Certificate STC process Familiarity with the FAA Airworthiness Directive AD process and rules governing disposition Translates guidance and engineering principles and procedures into usable working direction for assigned projects Ability to read and interpret technical drawings, preferably those created by Boeing, Airbus and Douglas. They should also be familiar with the documents needed to routinely maintain commercial aircraft Structural Repair Manual SRM, Aircraft Maintenance Manual AMM, Illustrated Parts Catalog IPC, etc. Ability to analyze Original Equipment Manufacturer OEM source documents Service Bulletins, Service Letters, etc. and make independent decisions based on analysis of available data regarding incorporation on Customers fleet. Ability to quickly learn and adhere to Operators specific processes and procedures. Project Management skills multiple task Gathers, coordinates and applies basic engineering data using established and appropriate or defined engineering principles and procedures Applies area of specialty to design, develop and implement creative and innovative solutions to difficult problems Reviews progress with management and recommends corrective action along with review of alternatives Performs such individual assignments as supervisors and superiors may direct ensures adequate and continuous controls are exercised over all assigned activities affecting quality establishes and maintains effective work relationships within the department, the Corporation and the community and maintains the professional competence, knowledge and skill necessary for the satisfactory performance of all assigned responsibilities Travel as required All other duties as assigned.
 
Job Number: 17-729
Job Location: Midwest
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 03/21/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Location: Savannah, GA
Pay Rate: $58/hr - $63/hr
Duration: Long Term Contract
Shift: First

Unique Skills:
-This position will review designs for Electrical Systems aspects.
-Activities include interacting and coordinating with DERs/ARs during a certification project, coordinating, tracking and completing certification tasks, writing certification plans, test plans, test reports and preparing related paperwork and forms.
-The ideal candidate will have:
-At least one (1) year experience with certification activities associated with STC projects
-Experience with aircraft interior outfitting preferred.
-Current Electrical Systems DER/AR designation preferred
-EWIS experience desirable

Education and Experience Requirements:
-Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

-Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area.

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7129
Job Location: Savannah, GA
Rate: 58.00-63.00
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 05/22/2018
Last Updated: 06/11/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Aerospace launch systems

Description:
Integration & Test Electrical Engineer

Specific duties include hands-on electrical integration of flight hardware, developing/maintaining processes and procedures for vehicle assembly and vehicle testing, hands-on electrical testing of flight hardware, and documenting and pursuing root cause of discrepancies found with hardware.
• Bachelor’s Degree (BS) in Electrical Engineering
• 10 years of electrical hands-on integration & test or related experience is required
• Ability to work in a fast pace team environment and multi-task
• Strong written and verbal communication skills
• Ability to solve problems
ABILITY TO OBTAIN AN ACTIVE SECRET PREFERRED
 
Job Number: 951357
Job Location: multiple
Rate: market rate
Per Diem: yes
Overtime: possible
Duration: 12 months + Contract
Start Date: mid Febuary
Input Date: 12/28/2017
Firm Name: ADVANCED TECHNOLOGY
Attention: Domenic
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Level 2

Description:
Electrical Engineer - Level 2 (Integrated Circuit Layout Engineer)

Location: Santa Barbara, CA
Pay Rate: DOE ($50/hr - $70/hr)
Duration: 1 year W2 contract
Shift: First, 4x10, no OT
**MUST be a U.S. CITIZEN**
**MUST be ELIGIBLE to obtain a SECRET CLEARANCE**

Description
INTEGRATED CIRCUIT LAYOUT ENGINEER - Performs transistor level silicon layout of CMOS integrated circuits for read-out integrated circuit infrared applications.

Skill/Experience/Education (Mandatory):
-Performs transistor level silicon layout of CMOS integrated circuits for read-out integrated circuit infrared applications.
-IC Layout Engineering: CMOS VLSI transistor level layout (4-5 years' required)
-BS degree or higher.
-Must be U.S. Citizen.
 
Job Number: 7887
Job Location: Santa Barbara, CA
Rate: 50-70
Per Diem: Split Possible
Overtime: No
Duration: 1 year
Start Date: ASAP
Input Date: 10/23/2017
Last Updated: 02/05/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Level 3

Description:
Electrical Engineer – Level 3

Location: Cape Canaveral, FL
Pay Rate: DOE
Duration: 1 year W2 contract
Shift: not specified, exempt OT
**MUST be a U.S. CITIZEN**


Job Description / Responsibilities:
-The Electrical Engineer Level 3 will prepare and coordinate predominantly Electrical design, construction and troubleshoot interfaces for launch facilities electrical systems and support equipment installations at CCAFS for this Company.
-The successful candidate, as part of Company's Engineering and Infrastructure Team, shall be required to produce accurate working schematics and detailed design drawings as well as generate validating electrical analysis calculations.
-He/she will perform field walk-downs and review and revise electronic CAD files from a variety of native drawing databases to produce accurate drawings for implementation of the project.
-Candidate will ensure all projects are maintained on implementation schedules and within established engineering budgets.
-May conduct feasibility studies, determine engineering criteria or manpower and cost estimates for projects or tasks, or perform analyses to develop design/redesign options, improvements, or recommendations for systems and components.
-Evaluate components for life assessment and market requirements.
-Researches, develops, designs, and tests electrical components, equipment, systems, and networks.
-Actively supports system operation, trouble shooting and maintenance.
-This position requires knowledge of Electrical design of commercial medium voltage equipment and systems, drafting practices as well as a sound practical knowledge of engineering principles, practices, and industry standards including NFPA 70e and NEC codes.
-Candidate shall have the ability to successfully interface with contractor personnel which requires onsite observation and direct contact in the field working with Union Workforce personnel.

-Duties shall include, but not limited to, Contractor walk downs, Request for Information evaluation and resolution, Statements of Work and Field Work Directives development.
-Bachelor's degree highly preferred

-The successful candidate should have at least (10) years of relevant experience building and/or modifying facilities electrical systems.
-Also, he/she should have at least (5) years of recent Autodesk AutoCAD experience (version 2013 or newer).
 
Job Number: 8439
Job Location: Cape Canaveral, FL
Rate: DOE
Per Diem: Split Possible
Overtime: Exempt
Duration: 1 year
Start Date: ASAP
Input Date: 12/19/2017
Last Updated: 02/14/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Level 3

Description:
Electrical Engineer - Level 3 (ACTIVE DoD SECRET REQUIRED)

Location: Lexington, KY
Pay Rate: DOE ($35/hr - $45/hr)
Duration: 9 month W2 contract
Shift: First, 5/40, no OT
**MUST be a U.S. CITIZEN**
**MUST have an ACTIVE DoD SECRET CLEARANCE**

Description
As an Electrical Engineer, you will work as part of an engineering team. The team is focused primarily on modifying existing hardware and integrating components into various platforms based on customer specifications.
Your job will be to develop component and system designs based on customer requirements and interface control documents or other similar information. Your designs will comply with applicable military specifications, SAE, ANSI, ASME, and other related design and drafting standards.
Upon design completion, you will be expected to support the fabrication, installation, and integration of your design by providing support to the manufacturing and installation workforce as required.
Experience with aircraft wiring and electrical systems
Ability to create and review various electrical drawing types (wire diagram, termination, cable harness, routing)
Experience with AutoCAD or similar 2D drafting tool Demonstrated previous success working in a team based environment to meet objectives
Strong communication skills, both oral and written Familiarity with SAE AS50881 design guidelines
Understanding of ANSI/ASME Y14.100 or related design and drafting standards
Familiarity with C-130 or other fixed wing aircraft Experience with an engineering change process and/or configuration control process

Skill/Experience/Education (Mandatory):
ACTIVE DoD SECRET CLEARANCE
AutoCAD – (4+ years required)
MS Office Suite – (4+ years required)

Desired:
CATIA V5
TeamCenter Engineering
JobScope/ IT Reports
 
Job Number: 8325
Job Location: Lexington, KY
Rate: 35.00-45.00
Per Diem: Split Possible
Overtime: No
Duration: 9 mos
Start Date: ASAP
Input Date: 12/11/2017
Last Updated: 02/19/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Electrical Engineer 2 - O/M - LA

Description:
Chipton-Ross is seeking a Electrical Engineer 2 for an opening in Avondale, LA.

RESPONSIBILITIES:
Candidate will be responsible for establishing, overseeing, and managing all activities related to assigned shipboard systems. Candidate will perform the following: Research, development, and design of electrical components, equipment, systems, and networks in accordance with all contractual requirements, military and commercial specifications; initiate procurement specifications; review and approve vendor proposals; review, comment on, adjudicate and approve vendor furnished information for translation into construction products; interface with vendors and Navy technical representatives; support vendor design reviews and testing; develop drawings and other documents IAW Mil-Specs and contract drawings; interface with other disciplines and departments to ensure a seamless integration of assigned systems into the shipboard environment; address and resolve technical issues, and make decisions on problems in his/her area of responsibility; support shipbuilding production department as required.

REQUIRED EXPERIENCE:
Bachelor's of Electrical Engineering with two years of engineering experience or Master's of Electrical Engineering with no prior experience, or similar degree background. . Previous shipbuilding experience is highly desired. A qualified candidate should be proficient in Microsoft Office applications and AutoCAD 2014.

ADDITIONAL EXPERIENCE:
It is preferred that the candidate be familiar with shipboard Interior Communications systems such as Switchboards, Telephone systems, Announcing, TV and Audio, Alarms, Indicating, etc. and have an understanding of the typical shipboard interfaces, interconnections, and integration requirements. Familiarity with electrical power distribution systems, control systems, and C4ISR systems is a plus. Current clearance is also a plus.

EDUCATION:
Bachelor's of Electrical Engineering

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 155942
Job Location: Avondale, LA
Rate: $42 to $46.00 DOE
Duration: 1 year
Input Date: 06/03/2016
Last Updated: 12/15/2018
Firm Name: CHIPTON ROSS
Attention: Andrew Craft
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: acraft@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer II ( Chandler, AZ ) 7802712

Description:
Electrical Engineer II ( Chandler, AZ ) 7802712
11 month Contract

Pay Rate: $50/hr w2

Work with a team of engineers to develop electromagnetic models to capture electromagnetic environment effects (E3)including the prediction of pin level transients. Work within a cross functional team to leverage inputs from CAD, subsystems and systems engineering to develop a baseline electromagnetic model and increment as the system design evolves to capture E3 effects. Updates to the model may include general design changes or the evaluation of potential mitigation approaches. Responsible for model validation through the selection of hardware sets which may be components, subsystems or a combination of them. Includes the development of test plans for the evaluation of those hardware sets with demonstration of model validation though appropriate comparisons between the model and measurements. Travel of up to 25% of the time may be required.

Job Snapshot: Must haves:
Experience with electromagnetic environment effects (E3). On the resume that may show up as intra-system electromagnetic compatibility (EMC), Subsystem and equipment electromagnetic interference (EMI), Lightning,…
Aerospace experience (rocket (launch) or satellite systems)
Active Secret Clearance (or cleared within the past year)
 
Job Number: 7802712
Job Location: Chandler, AZ
Rate: 50
Per Diem: Yes
Overtime: yes
Duration: 11 month
Start Date: ASAP
Input Date: 01/19/2018
Firm Name: TALENTPRO CONSULTING
Attention: tim
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X101
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer III ( New Church , VA ) 7043984, Antares Spacelift

Description:
Electrical Engineer III ( New Church , VA ) 7043984
12 Month Contract

Pay rate: $50 - 55/hr w2

Integration & Test Electrical Engineer will support the Antares Spacelift Program. The Antares Program launches spacelift vehicles out of Wallops, VA, to delivery supplies and scientific equipment to the Space Station.

The Integration & Test Engineer will manage assembly, integration, and test of space launch vehicle flight hardware at the Wallops launch site. Specific duties include hands-on electrical integration of flight hardware, developing/maintaining processes and procedures for vehicle assembly and vehicle testing, hands-on electrical testing of flight hardware, and documenting and pursuing root cause of discrepancies found with hardware.

• Bachelors Degree (BS) in Electrical Engineering • 10 years of electrical hands-on integration & test or related experience is required
• Experience with rocket systems is required
• Experience managing/mentoring less experienced electrical engineers
• Ability to work in a fast pace team environment and multi-task
• Strong written and verbal communication skills • Ability to solve problems • Travel availability 5%
 
Job Number: 7043984
Job Location: New Church, VA
Rate: Open
Per Diem: Split
Overtime: Yes
Duration: 12 Month
Start Date: ASAP
Input Date: 01/19/2018
Firm Name: TALENTPRO CONSULTING
Attention: Tim
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X101
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

Electrical Engineers

Description:
Vehicle systems integration
 
Job Location: OH/MI/IN
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: jmac@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Harness Installation Engineer-Special Missions

Description:
UNIQUE SKILLS
Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project. Aerospace experience is required. Knowledge of Catia V5 is required. Candidate must be able to design wire harness assemblies and installations utilizing the Catia V5 Electrical and Sheet Metal Work Benches. Must have intimate knowledge of an ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements, while meeting all installation and maintainability requirements. Candidate must possess knowledge of regulatory guidance material relative to aircraft harness design. Excellent verbal and written communication skills, and computer skills (Catia V5, Catia V4, PC/MS Office) are required.

JOB DESCRIPTION
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs. in the specific technical discipline or 10 yrs. broad engineering experience in several technical disciplines with Bachelors, or 3 yrs. in the specific technical discipline with Masters, or 1 yr. in the specific technical discipline with PhD. Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Client products and services

PRINCIPAL DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

ADDITIONAL FUNCTIONS
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned
 
Job Number: 17-783-115282
Job Location: Southeast
Rate: $58.00 to $63.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 07/11/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Harness Installation Engineer - Special Missions

Description:
Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Duration: Long Term Contract (1-4 years)
Shift:1st Shift


Unique Skills:
Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project. Aerospace experience is required. Knowledge of Catia V5 is required. Candidate must be able to design wire harness assemblies and installations utilizing the Catia V5 Electrical and Sheet Metal Work Benches. Must have intimate knowledge of an ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements, while meeting all installation and maintainability requirements. Candidate must possess knowledge of regulatory guidance material relative to aircraft harness design. Excellent verbal and written communication skills, and computer skills (Catia V5, Catia V4, PC/MS Office) are required.

Job description:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

Principal Duties and Responsibilities:
Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned
 
Job Number: 7876
Job Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 03/09/2018
Last Updated: 03/12/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Power System Engineer

Description:
• System Certification Requirements: Cert Plan, Flight Test Plan, Flight Test Report, Qual Test Report, Lab test report, Testing requirements/Flight Clearance and or SOF Requirements, development testing
• Hardware Qualification: Plans, procedures, Reports, conformity, ATP & Outline Drawings
• Software Certification: Experience reviewing PSAC, CIA, SAS.
• Experience in software V&V.

Required Experience in the following:
• Electrical Power Generation, control and indicating
• Secondary Power Distribution, control and indicating
• Solid State Electrical Power.

Desired Experience in the following:
• Working Knowledge ARP4754 and CFR 25
• Project Management

Skills/Experience:
• Configuration change management
 
Job Number: 24-174
Job Location: Savannah, GA
Rate: $58 - $63
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 09/25/2017
Last Updated: 02/06/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Power-Loads Engineering Contractor - Special Missions

Description:
UNIQUE SKILLS
Required Experience in the following:
• Electrical Power Generation, control and indicating
• Power Distribution, control and indicating
• Electrical Load Analysis

JOB DESCRIPTION
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs. in the specific technical discipline or 10 yrs. broad engineering experience in several technical disciplines with Bachelors, or 3 yrs. in the specific technical discipline with Masters, or 1 yr. in the specific technical discipline with PhD. Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of client products and services

PRINCIPAL DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

ADDITIONAL FUNCTIONS
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

OTHER REQUIREMENTS
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
Desired Experience in the following:
• Working Knowledge ARP4754 and CFR 25
• Project Management Skills/Experience
• Configuration change management
 
Job Number: 17-742-103561
Job Location: Southeast
Rate: $58.00 to $63.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 07/11/2018
Last Updated: 07/20/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Systems Engineer

Description:
Unique Skills:
• Avionics System Integration Experience Require, Honeywell Epic System Experience Preferred

Position Purpose:
• Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of products and services

Education and Experience Requirements:
• Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Essential Functions:
• Contributes to planning, developing and coordinating of important engineering projects
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
• Acts as liaison with representatives outside of the assigned group/area
• Actively works to improve daily processes and ensures all work meets customer requirements
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
• Performs other duties as assigned
• Advanced degree in engineering related field preferred
• The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 24-215
Job Location: Savannah, GA
Rate: $58 - $63
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 02/22/2018
Last Updated: 05/17/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Systems Engineer

Description:
Electrical Systems Engineer

Location: Savannah, GA
Pay Rate: $58/hr - $63/hr
Duration: Long Term W2 Contract
Shift: First

Unique Skills:
-Avionics System Integration Experience Required
-Honeywell Epic System Experience Preferred

Education and Experience Requirements:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

Principal Duties and Responsibilities/Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 8227
Job Location: Savannah, GA
Rate: 58.00-63.00
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/10/2017
Last Updated: 02/19/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Systems Engineer

Description:
Electrical Systems Engineer

Location: Savannah, GA
Pay Rate: $58/hr - $63/hr
Duration: Long Term Contract
Shift: First

Unique Skills:
Aircraft power / electrical / avionic systems design, integration and implementation. (design, certification and system support)

Job description:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

Principal Duties and Responsibilities/Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 7677
Job Location: Savannah, GA
Rate: 58.00-63.00
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 03/07/2018
Last Updated: 05/17/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Technical Designer

Description:
EE Technical Designer

Location: Tukwila, WA
Duration: 12 Months

Skill Code: 65L-Wiring Installation Design

Description:
Serves as the subject matter expert for the development, maintenance and release of electrical/mechanical drawings, systems designs or engineering documentation and data by applying Company, industry and governmental standards for multiple customers. Proposes innovative solutions for emergent technical issues. Uses design tools to document and maintain configuration control of designs. Manages, creates, develops and maintains highly complex or specialized systems designs by preparing design layouts, modifying existing designs and integrating systems elements. Directs validation of complex engineering system design and functionality. Leads the process for product installation designs and part designs ranging from simple to complex. Coordinates activities and products with cross-functional groups, internal partners and external suppliers. Reviews and assigns work to others. Works under consultative direction.

Education / Experience:
AA degree in related discipline and typically 9 or more years of related experience or an equivalent combination of education and experience.
 
Job Number: 17-20805
Job Location: Tukwila, WA
Duration: 12 Months
Input Date: 12/21/2017
Firm Name: ICONMA LLC
Attention: Robin
Address: 1201 PACIFIC AVE STE 600
City, State: TACOMA, WA 98402
Phone: 253/213-2012
Website: www.iconma.com

Electrical Technician

Description:
One year in length
Maximum Hourly pay rate $18.00
Tests and troubleshoots electronic products using standard and specialized test equipment. 

1. Troubleshoots electronic products to sub-assembly and component level utilizing schematics and standard troubleshooting practices and procedures 
2. Sets up test equipment and tests electronic products using established test procedures and schematics
3. Provides technical guidance to assemblers and re-work assemblers 
4. Performs cross functional tasks within fairly similar situations resulting in standardized but not identical outcomes

5. Knowledge of the operation and use of electronic production test equipment and hand assembly tools used in a high tech surface mount & through-hole technology manufacturing and production environment
6. Knowledge of advanced electronic test and troubleshooting techniques to component level.
7. Uses product test and measurement equipment, digital/analog voltmeters, oscilloscopes, hi-pot meters, power supplies, and automatic and standard test equipment, etc.
8. Recommends and/or proposes process improvements 
8. Ensures that all relevant quality information/feedback is provided 
10. Utilizes written or visual instructions involving use of quantitative information from specifications, schematics, graphs, pictures, gages, etc.
11. Provides written and/or oral communications concerning a variety of situations following test, troubleshooting, examinations, etc.
12. Keeps workstation, tools and equipment in a neat and orderly manner 
13. Understands and complies with all Company, safety rules and regulations

Requirements/Knowledge: 

v Education Required:
o Associate degree in Electronics (2 year) or certified program (18 mos.) plus 1 year of experience

v Experience 
o 1-3 years of electronics related experience

v Skill Level Required: 
o Skills required in maintaining close specifications using tools & gages, schematics and a variety of electronic equipment 

o Should have a high level of electrical and mechanical aptitude and analytical skills
o Ability to interpret drawing and specifications
o Basic computer skills
o Knowledge of manufacturing processes and how to effectively troubleshoot problems
o Should possess dexterity skills, good hand & eye coordination 
o Willing and able to take and pass basic electronics test 

Desired Qualifications:

v Past experience in a manufacturing environment
v Past experience in a self-directed teaming environment
v Lean manufacturing knowledge
v Understanding of IPC-A-610 standards
 

 
Job Number: 1710063131
Job Location: Bohemia, NY
Duration: 12 months
Input Date: 01/31/2017
Last Updated: 12/14/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Eric Khassanov
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002G9j8AAC&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical/Aircraft Cabin Interiors & Systems Engineering Contractor

Description:
Electrical/Aircraft Cabin Interiors & Systems Engineer

Location: Savannah, GA
Pay Rate: $58/hr - $63/hr
Duration: Long Term Contract
Shift: First

Unique Skills:
Ideal Candidates will have electrical engineering experience with Aircraft Cabin Interiors and Systems to include but not limited to:
- Cabin Management System
- Cabin Entertainment System
- Cabin Lighting
- Cabin Switch Controls
- Telephone System
- Satellite communications
- Water System
- Waste System
- EWIS
- Cabin interior monuments
- Seats

Education:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area.

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 7428
Job Location: Savannah, GA
Rate: $58-$63
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 03/07/2018
Last Updated: 04/24/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electromechanical Design Engineer

Description:
Electromechanical Design Engineer

Location: Orlando, FL
Pay Rate: DOE ($45/hr - $55/hr)
Duration: 1 year W2 contract
Shift: not specified
**MUST be a U.S. CITIZEN**

Duties:
-An Electromechanical Design Engineer is responsible for the design, documentation and production floor support of hardware (missile electronics, missile electrical cabling, airborne support equipment, ground support equipment and test sets).
-Additional duties include investigation of discrepant hardware and test anomalies.

Skills Required:
-Must have at minimum a Bachelor of Science degree in an Engineering related discipline.
-Design experience with electrical cables, test sets, breakout boxes, 19” support equipment rack design
-Proficiency with Creo Parametric 2.0 Cabling and Intralink.
-Proficiency with ASME Y14.5M-1994 and generating detailed engineering drawings.
-Proficiency with reading schematics for electrical cable assemblies in order to define and select connectors, backshells, splices, wiring, etc.
-Basic computer skills and a working knowledge of Microsoft Office products (Word and Excel)
-Compliance to quality and safety policies at all times!
-Must be a US Citizen
-Physical Requirements – This work requires delicate handling, reaching, light lifting and may require a combination of sitting and standing as well as walking between test locations and occasional use of small step-ladders.
DESIGN ENGINEER CREO CABLING ASME/ANSI READING SCHEMATICS

Desired:
-Experience with design of flexible and semi-rigid RF cables

Education:
-Must have at minimum a Bachelor of Science degree in an Engineering related discipline.
 
Job Number: 8364
Job Location: Orlando, FL
Rate: 45-55
Per Diem: Split Possible
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 01/09/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Electronic Troubleshooter

Description:
Tests and troubleshoots electronic products using standard and specialized test equipment. 

1. Troubleshoots electronic products to sub-assembly and component level utilizing schematics and standard troubleshooting practices and procedures 
2. Sets up test equipment and tests electronic products using established test procedures and schematics
3. Provides technical guidance to assemblers and re-work assemblers 
4. Performs cross functional tasks within fairly similar situations resulting in standardized but not identical outcomes

5. Knowledge of the operation and use of electronic production test equipment and hand assembly tools used in a high tech surface mount & through-hole technology manufacturing and production environment
6. Knowledge of advanced electronic test and troubleshooting techniques to component level.
7. Uses product test and measurement equipment, digital/analog voltmeters, oscilloscopes, hi-pot meters, power supplies, and automatic and standard test equipment, etc.
8. Recommends and/or proposes process improvements 
8. Ensures that all relevant quality information/feedback is provided 
10. Utilizes written or visual instructions involving use of quantitative information from specifications, schematics, graphs, pictures, gages, etc.
11. Provides written and/or oral communications concerning a variety of situations following test, troubleshooting, examinations, etc.
12. Keeps workstation, tools and equipment in a neat and orderly manner 
13. Understands and complies with all Company, safety rules and regulations

Requirements/Knowledge: 

v Education Required:
o Associate degree in Electronics (2 year) or certified program (18 mos.) plus 1 year of experience

v Experience 
o 1-3 years of electronics related experience

v Skill Level Required: 
o Skills required in maintaining close specifications using tools & gages, schematics and a variety of electronic equipment 

o Should have a high level of electrical and mechanical aptitude and analytical skills
o Ability to interpret drawing and specifications
o Basic computer skills
o Knowledge of manufacturing processes and how to effectively troubleshoot problems
o Should possess dexterity skills, good hand & eye coordination 
o Willing and able to take and pass basic electronics test 

Desired Qualifications:

v Past experience in a manufacturing environment
v Past experience in a self-directed teaming environment
v Lean manufacturing knowledge
v Understanding of IPC-A-610 standards
 
Tests and troubleshoots electronic products using standard and specialized test equipment. 

1. Troubleshoots electronic products to sub-assembly and component level utilizing schematics and standard troubleshooting practices and procedures 
2. Sets up test equipment and tests electronic products using established test procedures and schematics
3. Provides technical guidance to assemblers and re-work assemblers 
4. Performs cross functional tasks within fairly similar situations resulting in standardized but not identical outcomes

5. Knowledge of the operation and use of electronic production test equipment and hand assembly tools used in a high tech surface mount & through-hole technology manufacturing and production environment
6. Knowledge of advanced electronic test and troubleshooting techniques to component level.
7. Uses product test and measurement equipment, digital/analog voltmeters, oscilloscopes, hi-pot meters, power supplies, and automatic and standard test equipment, etc.
8. Recommends and/or proposes process improvements 
8. Ensures that all relevant quality information/feedback is provided 
10. Utilizes written or visual instructions involving use of quantitative information from specifications, schematics, graphs, pictures, gages, etc.
11. Provides written and/or oral communications concerning a variety of situations following test, troubleshooting, examinations, etc.
12. Keeps workstation, tools and equipment in a neat and orderly manner 
13. Understands and complies with all Company, safety rules and regulations

Requirements/Knowledge: 

v Education Required:
o Associate degree in Electronics (2 year) or certified program (18 mos.) plus 1 year of experience

v Experience 
o 1-3 years of electronics related experience

v Skill Level Required: 
o Skills required in maintaining close specifications using tools & gages, schematics and a variety of electronic equipment 

o Should have a high level of electrical and mechanical aptitude and analytical skills
o Ability to interpret drawing and specifications
o Basic computer skills
o Knowledge of manufacturing processes and how to effectively troubleshoot problems
o Should possess dexterity skills, good hand & eye coordination 
o Willing and able to take and pass basic electronics test 

Desired Qualifications:

v Past experience in a manufacturing environment
v Past experience in a self-directed teaming environment
v Lean manufacturing knowledge
v Understanding of IPC-A-610 standards
 
 
Job Number: 1710066458
Job Location: Bohemia, NY
Duration: 12 months
Input Date: 04/07/2017
Last Updated: 12/14/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Eric Khassanov
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000021ioWAAQ&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer - Level 3

Description:
Embedded Software Engineer - Level 3

Location: Archbald, PA
Pay Rate: DOE ($40/hr - $55/hr)
Duration: 1 year contract
Shift: First, 9/80, OT
Travel: Possible occasional travel to customer or vendor sites
**MUST be a U.S. CITIZEN**
**MUST be ELIGIBLE for a SECRET CLEARANCE – ACTIVE SECRET CLEARANCE PREFERRED**

Description
-Designs, develops, operates, and maintains software and firmware components and computing systems software to be applied to and integrated with engineering, scientific, and manufacturing requirements.
-Applies the appropriate standards, processes, procedures, and tools throughout the system development life cycle to support the generation of such engineering applications and products such as laboratory simulation systems, airplane flight control and display systems, avionics, mechanical and electrical systems, weapons armament, commercial and military aircraft systems, mobile and ground-based defense systems, space systems, and other systems and applications of this nature.
-Interfaces with customers, suppliers, application users, and other technical and support personnel.

Skill/Experience/Education (Mandatory):
- C/C++ programming: (6-8 years' experience required)
-Embedded software: (6-8 years' experience required)
-Hardware/software integration: (4-5 years' experience required)
-Software documentation experience
-Software verification experience
 
Job Number: 7788
Job Location: Archbald, PA
Rate: 40-55
Per Diem: Split Possible
Overtime: Yes
Duration: 1 year
Start Date: ASAP
Input Date: 12/01/2017
Last Updated: 02/05/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer 3

Description:
Engineer 3

Location: Savannah, GA
Pay Rate: $58/hr - $60/hr
Duration: Long Term Contract
Shift: Not specified

Unique Skills:
-The ideal candidate will perform cabin configuration engineering and will have a background in electro-mechanical design and/or integration.
-Understanding of aircraft mechanical component integration along with basic electrical integration and application is highly preferred.
-Position will generate build list configuration and certification strategy for a complete aircraft cabin interior installation.
-Knowledge of business jet cabin interiors is highly desired.

Education and Experience Requirements:
Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Five (5) yrs in specific technical discipline or ten (10) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

Principle Duties and Responsibilities/Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering related field preferred. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 8162
Job Location: Savannah, GA
Rate: 58-60
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 03/07/2018
Last Updated: 03/14/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer II

Description:
JOB DESCRIPTION
SUMMARY STATEMENT
Applies advanced knowledge of principles, theories and concepts and industry practices and standards related to the design, development, testing, manufacturing, repair and certification of aircraft structures, component parts and related component systems and subsystems for operational aircraft that are consistent with Federal Aviation Administration guidelines.

ESSENTIAL FUNCTIONS AND KEY RESPONSIBILITIES
Develops solutions to a variety of moderate complexity or unusual engineering or technical problems or assignments requiring judgment and ingenuity to work within engineering protocols in the analysis, design and/or repair development of aircraft structures, power plant component parts, mechanical and electrical systems/structures and subsystems for commercial, military, executive, general aviation, or special purpose applications on operational aircraft.

Analyzes and interprets engineering proposals and documentation such as drawings, material and product specifications, structural repair manuals (SRMs), component maintenance manuals (CMMs) and illustrated parts lists (IPLs/IPCs) to develop design and/or repair schemes approaches. Confers with management to clarify or resolve problems.

Designs and develops and/or repairs of structural, power plant and other operational and structural components that are used in operating aircraft. This includes producing or assisting in the production of computer aided drawings and engineering reports.

Develops design and/or repair data packages and obtains FAA approvals through internal and external FAA Designated Engineering Representatives (DERs); troubleshoot failure modes, communicate and interact with customer engineering groups and/or internal personnel for design, development and/or cost effective repair schemes and approvals.

Designs and develops analytical programs concerned with ground or flight testing, or development of acoustic, thermodynamic, or propulsion systems.

Tests models, prototypes, subassemblies, or production items to study and evaluate operational characteristics and effects of stress imposed during actual or simulated operational conditions.

ANCILLARY FUNCTIONS AND RESPONSIBILITIES

Performs other duties as required. These duties may include assignments in job classifications other than the primary assignment.

JOB QUALIFICATIONS
FORMAL EDUCATION, TRAINING, PROFESSIONAL CERTIFICATION AND WORK EXPERIENCE
Experience may be substituted for the formal education and training requirements in this section at the discretion of management. Technical Bachelor level degree in Engineering or the sciences or equivalent and three (3) to six (6) years related experience and/or training; or equivalent combination of education and experience.

LEVEL OF SUPERVISION REQUIRED
Works under general supervision. Sound judgment, completeness and accuracy are expected.

STANDARD JOB REQUIREMENTS
• Must be able to arrive to work on time and attend regularly
• Must be able to fluently read and write the English language, perform basic mathematical calculations and interpret and comprehend company policies, procedures, safety instructions and other like documents.
• Competent in the use of standard software applications such as Microsoft Word and Excel and operate standard office equipment
• Communicate effectively using electronic media and in written and verbal forms
• Above average communication skills, tailoring to technical and non-technical audiences
• Make telephone and direct personal contact with internal and external personnel and make formal presentations to small or large groups.

SPECIAL TRAINING AND BEHAVIORAL COMPETENCIES
The following training requirements and competencies must be met before acceding to this job.
• Safety training applicable to the job and work area.
• Complete the required CLIENT University training for all Stakeholders.
• Comply with The CLIENT Leadership Competencies for Stakeholders.
• Ability and willingness to assist and transfer technical knowledge to less experienced Stakeholders.

PHYSICAL REQUIREMENTS
While performing the duties of this job, the Stakeholder is frequently required to sit and talk and hear. The Stakeholder is occasionally required to stand; walk; reach with hands and arms; and stoop, kneel, crouch, or crawl. The Stakeholder must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, color vision, and ability to adjust focus. Must be able to travel between facilities and operate standard office equipment. Work in excess of eight (8) hours per day and five (5) days per week as required. Must be able to ascend and descend stairs.

WORK ENVIRONMENT
While performing the duties of this job, the Stakeholder is occasionally exposed to moving mechanical parts, fumes or airborne particles, toxic or caustic chemicals, and outside weather conditions. The noise level in the work environment is usually moderate.

MENTAL REQUIREMENTS
Able to work as a team member, highly organized, work well under stress and handle multiple priorities. Must possess interpersonal and communication skills to interact with other people.
 
Job Number: 17-802-13920
Job Location: Midwest
Rate: Mid 70's
Per Diem: No
Overtime: Possible
Duration: Direct
Start Date: ASAP
Input Date: 03/21/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Technician

Description:
Our client, a market leader and technology innovator, is seeking talented professionals to deliver cutting edge solutions to their customers. Well-respected, with a global presence, our client consistently offers a powerful and robust portfolio of products, services and solutions that help customers successfully execute their missions in today’s dynamic environment. With unsurpassed engineering, using an open systems approach, our client solves the nation’s most complex challenges while foreseeing future needs.

Engineering Technician
(US Citizenship Required*)
Scottsdale, AZ
2017-5043

Responsibilities:
The Engineering Technician will primarily perform hardware integration and test of highly complex, highly-reliable spaceflight payload electronics. Tasks also include
• Align, test, troubleshoot, analyze data, and technical evaluation of Digital and RF modules.
• Develop and prepare reports and procedure documentation
• Second and/or third shift coverage will be required for most assignments.

Qualifications:
• Required – Active Secret Clearance. Only candidates with an active clearance will be considered.
• Strong background in electrical test techniques.
• High level of understanding of product specifications.
• Proficient in using test equipment such as network analyzers, spectrum analyzers, logic analyzers, oscilloscopes, and signal generators is required.
• Able to read and follow detailed work instructions and/or test procedures.
• Has a solid understanding of the job skills and learns company policies and procedures to complete routine tasks

*US Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
Associate's degree in related discipline or equivalent is required plus a minimum of 3 years of relevant experience

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!


PLEASE APPLY ONLINE HERE: https://careers-moseleytechnical.icims.com/jobs/5043/adv-engineering-tech-2/job?mode=view
 
Job Number: 2017-5043
Job Location: Scottsdale, AZ
Duration: 12 Months
Input Date: 12/27/2017
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Bob Jones
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment Maintenance Technician (NC)

Description:
Looking for 6 Equipment Maintenance Technician for Kinston

MAINTENANCE-Technician 13.01

Dismantles, moves, assembles, installs, and repairs industrial machinery and equipment according to layout plans, blueprints, drawings, or verbal instructions. Dismantles equipment and machines using hammers, wrenches, crowbars, and other hand tools; moves machinery and equipment using hoists, dollies, rollers, and trucks; assembles and installs equipment such as conveyors and tram rails using hand and power tools; constructs foundations; aligns machines; performs scheduled inspection and maintenance.

Sets up and operates machine tools and fabrication machinery to rework or make new parts. Combined discipline in both Mechanical and Electrical skills sets is preferred, but core skills in either/or will also be strongly considered.

Duties:
1.      Assist higher grade employees in the completion of work or complete work under the direction of a higher grade employee in same job classification, or work plans.
2.      Perform root/cause analysis in support of reliability processes, and collaborate with vendors, engineering, team leader, customer, other crafts and management to solve equipment problems and develop corrective action.
3.      Enter and retrieve data from the CMMS system, and order parts required to accomplish the tasks, (except as relates to inventory, store, record, issue and any other duties related to material support technician.)
4.      Rework and maintain tools of all types and materials. Perform routine minor machine maintenance as part of their daily work duties (e.g., replacing machine filters, changing standard light bulbs on machines and equipment, maintaining lubrication/coolant levels, etc. as related to basic Total Preventative Maintenance duties).
5.      Train other employees in same job classification as requested or required.

In addition, each employee may be asked, on occasion, to complete other duties and responsibilities as required by Client leadership. 

Training and certification will be provided for the additional work when required.

Level B
1.      Use precision alignment and measuring instruments.
2.      Diagnose failures, determine parts and material requirements, and perform repairs as required to resume operation on the following:
CNC equipment
Motive equipment
Precision Pumps
3.      Operate plant equipment to fabricate and repair machine parts.
4.      Finish, scrape, flake, frost and lap to align and level machine beds, ways and related equipment.
5.      Lead, train, team with and plan sequence of work for assigned employees of equal and lower classifications in the Equipment Maintenance Technician Classification.

Requirements:
This is a 6 month contract position. Contractors will be temporarily assisting with bladder inspection, utilizing newly implemented X-Ray inspection.

Looking for contractors for All three shifts
Overtime / weekends
Local talent, preferred but if not found will accept out of state
On site interviews
6 month duration
Computer skills and mechanical

They will be processing bladders through a X-Ray machine looking for defects

FOSTER DESIGN'S BENEFITS:
• Working for a 54-year old company
• Minimum 6 Paid Holidays
• Blue Cross Blue Shield – Group Medical Insurance Plan
• MetLife – Long Term Disability Insurance
• Immediate 401K participation, 1 year 100% vesting schedule, matching employer contribution
• Vacation Pay
• Paid Weekly (Direct Deposit)
 
Job Number: FD-569533NC
Job Location: Kinston, NC
Rate: $33.00/HR
Per Diem: Yes - Possible
Overtime: Yes, as needed
Duration: 6 Months
Start Date: 03/19/20018
Input Date: 03/01/2018
Last Updated: 03/05/2018
Firm Name: FOSTER DESIGN INC
Attention: Recruiter
Address: 200 W DOUGLAS AVE STE 110
City, State: WICHITA, KS 67202
Phone: 316/832-9700
800 Phone: 800/345-3394
Fax Phone: 316/832-9357
Website: www.fosterdes.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
FAST Technician Sr.

Description:
FAST Technician Sr.
Denver, CO
Rate: DOE


Unique Skills:

*** This person will be station in the Denver, Colorado area *** Must be able to pass a DOT medical exam and meet all of the qualifications to operate large vehicles.FAA A & P Certificate, FCC license, or NCAT certification required. Valid Driver's License required. Ability to obtain Passport as international travel is a requirement. Must be available on an on-call basis 24 hours a day 7 days a week, with the ability to be on site or dispatched on the FAST aircraft or vehicle within two hours of the initial contact from Company. Must be able to communicate effectively with the customer, scheduling, FAST flight crews, Tech Ops, business office, vendors, Warranty, Field Service Reps and Hangar Ops. Performs required AOG maintenance and necessary servicing of all aircraft mechanical and avionics systems. Must demonstrate the ability to work independently and consistently to perform assigned maintenance and avionics tasks within the quoted or standard CMP time with little or no supervision.


Education and Experience Requirements:

HS diploma/GED. FAA A & P Certificate, FCC license, or NCAT certification required. Valid Drivers License required. Ability to obtain Passport. 8 years combined experience in inspection, maintenance or servicing of large/mid-size acft to include 2 years experience on Company acft.

Position Purpose:

Independently performs a variety of aircraft modifications and maintenance functions on AOG aircraft on road trips and in the Product Support org. Duties include adv troubleshooting, removal and installations of airframes, landing gear, engine components, electrical components, control systems and any other maintenance requirements to assure conformance to procedures, performances, and test specs on customer live in-service aircraft. Supports the customer in diagnosing and resolving technical problems with the aircraft.

Principal Duties and Responsibilities:

Essential Functions: 1. Must be available on an on-call basis, with the ability to be on site or dispatched on the FAST aircraft within two hours of the initial contact from Company. Must be able to communicate effectively with the customer, scheduling, FAST flight crews, Tech Ops, business office, vendors, Warranty, Field Service Reps and Hangar Ops. Acts as the single point of contact between Company and the customer to correctly relay the aircraft schedule and return to service expectations. 2. Performs required AOG maintenance and necessary servicing of all aircraft mechanical and avionics systems. Must demonstrate the ability to work independently and consistently to perform assigned maintenance and avionics tasks within the quoted or std CMP time with little or no supervision. 3. Complies with adv troubleshooting techniques for all model aircraft with assistance from Tech Ops. 4. Orders and receives all tooling and matls needed to service the AOG aircraft. Arranges the shipment of all core units and tooling back to Company. 5. Coordinates with the Inspection Dept to ensure compliance with internal and FAA inspection and doc requirements. Acts as the delegated Quality rep when assigned on road trips. Properly completes work order sign-offs, logbook entries, shift turnovers, expense reports and all other paper work in a timely manner. Ensures that all work accomplished meets quality stds and specs. 6. Establishes and maintains a professional working relationship with the customer and provides one-on-one direct familiarization briefings with the customer during the road trip. 7. Properly identifies (tags) customer property and equipment. Stores aircraft components and other customer property securely and safely. 8. Follows SOPs and JSAs/JRAs when operating GSE, such as power supply, hydraulic rigs, nitrogen filler carts, and oxygen service carts. Operates and supervises use of special support equipment used in removal and installations of major components. 9. Coordinates with Line Service and FBO ops to schedule movement of aircraft and assist with movement of aircraft. Also arranges, as needed, for the overhaul or repair of customer property and inspect/operate all interior installations and record discrepancies. 10. Provides regular updates on aircraft status and all customer support activity to Field Service Rep and management.

Additional Functions: 1. Assists in training new employees. 2. Performs other duties as assigned.

Other Requirements: 1. Formal training in the Company product line maintenance procedures and practices preferred to include Flight Safety Maintenance initial training for specific models required to support. 2. Must possess a working knowledge of the company policies and procedures, Repair Station and QC Manual, pertinent process specs, and technical reference matls. 3. Must possess a strong grasp of all aircraft avionics and mechanical systems and how they are related. Must possess the ability and understanding to comply with all system checkouts on an in-service aircraft.
 
Job Number: 8329
Job Location: Denver, CO
Rate: DOE
Per Diem: N/A
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/29/2017
Last Updated: 02/05/2018
Firm Name: INCONEN CORPORATION
Attention: Cathy O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Engineer - Aerospace

Description:
Currently seeking multiple contract or direct Flight Test Engineers to join a growing team in Seattle, WA. Relocation or frequent travel to Moses Lake required.

The ideal candidate will hold a Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science and possess 5+ years relevant work experience related to experimental flight test operations.

Responsibilities of the Aerospace Flight Test Engineer:

- Coordinate test and certification requirements.
- Author flight test and ground test plans including test hazard analysis.
- Support ground operations, including weight and balance activities, fuel management, pre-flight and post-flight tasks and briefings.
- Support flight and ground test conduct and data collection.
- Analyze test data and evaluate compliance with regulations.
- Prepare certification test reports.
- Domestic and occasional international travel is required.

Requirements of the Aerospace Flight Test Engineer:

- Bachelor degree or equivalent combination of work experience. - Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
- 5+ years relevant work experience related to experimental flight test operations.
- Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.
- Strong ability to analyze results
- Communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
- Proficient in working with Microsoft Office applications including Word, Excel, and PowerPoint. Ability to quickly learn to operate new software.
 
Job Number: Flight Test Engineer
Job Location: Seattle, WA - Washington
Rate: Open
Per Diem: Possible
Overtime: Yes
Duration: 2-3 year contract, or direct
Start Date: ASAP
Input Date: 12/28/2017
Last Updated: 01/23/2018
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Instrumentation Engineers

Description:
Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.
This position will be in the Test and Evaluation Support unit, which has four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations.

The Instrumentation Engineer is responsible for supporting the operational and technical success of the instrumentation group. This person works closely with all other Instrumentation Engineers, Technicians, other T&E Support Staff to meet instrumentation requirements.

Job Duties and Responsibilities (Essential Functions):

� Provide instrumentation services: to include:
o production of instrumentation specifications, sensor selection, wire diagrams, installation diagrams (FTEO packages), sensor and system calibration, signal conditioning, derived parameters, cockpit displays, data validation, data tracking, data recording, documentation and conformity.
o Ensuring that the instrumentation systems and deliverables meet quality standards as well as all customer specifications to include accuracy, resolution, and frequency range, and function correctly within harsh operating conditions typical of aircraft.
o Provide instrumentation equipment management to ensure that equipment is maintained, calibrated and available for re-use to minimize waste.
� Provide instrumentation technical input: advise the organization in regards to technical information for the best technical selection of sensors and support equipment at affordable costs. Works closely with Product Development Unit when new equipment and systems are required or for the design of Flight Test safety equipment, or any complex mechanical installations that require stress approval.
� Support Program Teams: Works with OEM & STC program and project managers with technical resources requirements. Fully supports the test planners in regards to their instrumentation needs.


Knowledge/Skills/Abilities:
� Intermediate knowledge skills and competency of Flight Test Instrumentation (FTI) and data equipment for the purpose of recording and monitoring parameters fitted to experimental aircraft including associated of industry processes and practices to include:
o Electrical and avionics design,
o Data Systems Design Principles
o Telemetry
o Air data booms (straight nose and swivel-head)
o Static trailing cones
o Sensitive aircraft instruments
o Cockpit displays
o End-user interface
o Portable test equipment such as hand-held stick force gauges
o High-end GPS receivers and antennas for precise aircraft positioning
o Position transducers - sting potentiometers, rotary potentiometers, LVDTs, RVDTs
o Pressure transducers
o Flowmeters
o Temperature sensors - thermocouple wire/probes/assemblies, RTD probes, thermistors, glass bulb thermometers
o Strain gauges, load cells, force transducers, torque sensors
o Portable weather stations - wind speed/direction, outside air temperature, relative humidity
o Video recording equipment
o Signal conditioners
o Data acquisition systems and data loggers
� Intermediate knowledge of flight test operations and flight certification.

Level Requirements (Minimum):
Education
� Formal Instrumentation Training (Military or Civilian) � Preferred
� BS in Engineering or equivalent experience

Experience
� 5+ years relevant technical experience
� Intermediate understanding of flight and ground test planning and test conduct, and test data analysis.
 
Job Number: #301-Flight Test Instrumentation
Job Location: Moses Lake, WA - Washington
Rate: Open
Per Diem: Possible
Overtime: Yes
Duration: 2-3 years or direct
Start Date: ASAP
Input Date: 12/28/2017
Last Updated: 01/23/2018
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Instrumentation Technician

Description:
This individual in this position will work with engineers to design and install instrumentation to support the collection of flight test data. The ideal candidate is self-motivated, detail oriented, and knowledgeable on instrumentation theory.
Responsibilities:
� Reading and creating wire diagrams.
� Selecting or auditing appropriate sensors given engineering requirements.
� Working with customers and engineers to define appropriate instrumentation requirements.
� Designing instrument installations and creating installation instructions.
� Instrumentation installation.
� Evaluating instrumentation installations for function and safety.
� Troubleshooting instrumentation problems.
� Data acquisition system operation.
� Documenting data system practices and procedures.
� Generating instructions and operation manuals.
� Developing sensor calibration and functional test procedures.
� Maintaining calibration records.
� Domestic and international travel may be required.
Desired Qualifications:

� 3+ years instrumentation experience in a testing environment. Aircraft flight test preferred.
� Demonstrates personal accountability, initiative and versatility on a consistent basis with minimal guidance.
� Ability to work interdependently, and lead small groups.
� CATIA V experience beneficial.
� Experience with data processing and analysis beneficial.
� Computer programming experience beneficial.
� Proficient in working with Microsoft Office applications including Word and Excel.
If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers. Please feel free to forward this email to others who might be interested.

Candidates must have legal authorization to work in the United States, Canada or Mexico
 
Job Location: Moses Lake, WA
Per Diem: possible
Overtime: possible
Duration: LT
Start Date: asap
Input Date: 12/28/2017
Last Updated: 01/23/2018
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
GNC Aerospace Engineer ( Gilbert, AZ ) 6954262

Description:
GNC Aerospace Engineer ( Gilbert, AZ ) 6954262
12+ Month Contract


Perform requirements management, vendor technical monitoring and guidance, and I&T activities for Guidance Navigation and Control (GNC) spacecraft component hardware. This includes analyzing system requirements to perform hardware component selection, developing component hardware Statement of Work (SOW), analyzing, allocating and decomposing higher level spacecraft requirements to their respective GNC components, monitoring component vendor’s development activities per the SOW and developing test procedures and automated tests of the GNC hardware to verify requirements, support spacecraft I&T activities, perform detailed spacecraft simulations using in house simulation tools, and analyze data to develop performance and functional data reports to support requirements.

Looking for satellite experience, launch vehicle, UAV and aircraft is acceptable if their related experience is with GNC hardware component. Without the GNC hardware component experience that’s a show stopper for the candidate. 5 – 8 years of experience is good

Required Capability:
Must have hardware electrical Perl background.
Additional Capability: Knowledge of Matlab & Simulink is a plus.
 
Job Number: 6954262
Job Location: Gilbert, AZ
Rate: open
Per Diem: Split
Overtime: Yes
Duration: 12 month
Start Date: ASAP
Input Date: 01/19/2018
Firm Name: TALENTPRO CONSULTING
Attention: Tim
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X101
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Inspector (Mechanical)

Description:
Notes from the Hiring Manager:

<> The Inspector should have experience inspecting cables and mechanical parts within a manufacturing environment , preferably with a mechanical background instead of electrical
<> They will receive multiple parts, which will be a mixture of cables and mechanical parts but vary from day-to-day; they should be able to see the part and know how to proceed with inspection, or at least be able to read the engineering drawings.
<> Experience with inspection tools such as Calipers, Measuring Devices / Equipment, Tape Measure, Feeler Gauge, etc
<> IPC 610 or 620 Certification is a plus


Summary:

To perform checks, tests, gauging, and instrument inspections of materials, goods in process, and finished goods.

Job Description:

> Performs audits, tests & inspections of materials, goods in process or finished goods within value stream (receiving through final system assembly) assuring quality first by determining compliance to drawings, procedures & specifications
> Applies established inspection procedures & uses simple inspection/testing tools and instruments of a “go/no go” nature.
> Develops and/or uses test and inspection set-ups utilizing mechanical and/or electrical test measurement equipment.
> Inspection methods and limits require good judgment and interpretation.
> Requires interpretation of inspection plans, tests and procedures.
> Recommends changes to procedures, processes, and drawings to improve efficiency and/or quality of the product.
> Identifies and documents nonconforming material in accordance with applicable procedures.
> Assists and trains others in assuring the proper test, measurement, and procedural operations.
> Ensure adherences to policies and procedures accordingly.
> Practices Total Quality principles and concepts.
> Acquire IPC-610/STD 001 and IPC-620 Certifications as applicable

Qualifications:

> 1-2 years related experience with a High School diploma preferred
> Knowledge of manufacturing and quality assurance processes and/or procedures.
> Knowledge of military and commercial quality specifications.
> Knowledge of Statistical Process Control.
> Knowledge of digital and analog circuitry.
> Knowledge of electrical and/or mechanical inspection.
> Knowledge of workmanship standards.
> Knowledge of packaging and preservation requirements.
> Understanding of Total Quality principles and concepts.
> Ability to communicate effectively verbally and in writing.
> Ability to use electrical and mechanical inspection equipment.
> Ability to develop and use simple to complex inspection set-ups.
> Basic algebraic skills.
> Ability to read, analyze and interpret detailed specifications, drawings, procedures, and schematics.
> Ability to work effectively within a team environment


Mark A Ludwig
Vice President
Global American Staffing
Email: mludwig@globalams.us
Direct: (508) 434 – 6180
Office: (508) 230 – 5030 x123
 
Job Number: 011_2018
Job Location: Hunt Valley, MD
Rate: DOE
Per Diem: Split Possible
Overtime: Yes / Possible
Duration: 12+ Months
Start Date: ASAP
Input Date: 02/28/2018
Last Updated: 04/02/2018
Firm Name: GLOBAL AMERICAN STAFFING
Attention: Mark A Ludwig
Address: 12 HARDING ST STE 204-205
City, State: LAKEVILLE, MA 02347
Phone: 508/230-5030
800 Phone: 800/510-8050
Fax Phone: 508/923-0005
Website: www.globalamericanstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Instrument Project Engineer - Refinery Exp (TX)

Description:
THIS IS NOT FOR AN INTERN, THIS POSITION REQUIRES AT LEAST 10-15 YEARS OF EXPERIENCE.

Basic Function
An Instrument Project Engineer (IE) is responsible for the design and implementation of process instrumentation from initial conception through field installation. They are responsible for designs that provide the most reliable and cost-effective instrument systems. In addition, the IE provides consulting services to process designers in developing process design specifications, develops operating and training manuals for mechanical and process personnel and participates in training operating personnel.

An IE:
• Writes purchase and construction specifications and writes and performs Factory Acceptance Tests.
• Uses vendor software programs for sizing safety and control valves.
• Specifies, procures, and configures Programmable Logic Controllers (PLC) and field hardware such as transmitters, controllers, pneumatic and electronic transmission system.
• Utilizes standards and best practices from American Petroleum Institute (API) and International Society of Automation (ISA), National Fire Protection Association (NFPA) to perform the above functions.

Responsibilities.
The Instrument and Controls Engineer may be responsible for:
• Function as project engineer on instrumentation and capital projects and large maintenance projects.
• Taking lead role on Instrumentation and controls capital projects including PLCs.
• Help identify areas where instrumentation/controls can improve plant operations and profitability.
• Developing capital and expense budget requirements related to instrumentation system upgrades, PM/PdM programs, repairs, expansions, etc.
• Serving as a technical resource to properly identify new and existing equipment specifications and proper operating parameters/ranges for instrumentation equipment.
• Overseeing application and interpretation of National Electric Code and other applicable city, state, federal codes and standards (e.g. NPRA, NFPA, API, ISA).
• Interact with Engineering and Construction contractors, both on-site and off-site.
• Leverage the application of instrumentation safety standards, mechanical integrity, design and maintenance.
• Using documentation systems and processes that maintain accurate instrumentation information and drawings.
• Support criticality assessments of the plant's instrumentation equipment.
• Design and evaluate Refinery Safety Instrumented Systems (SIS). Perform Safety Integrity Level (SIL) analysis and engineering upgrades of safety instrumented systems.

Basic Required Qualifications.
• Must be legally authorized to work in the United States, at least 18 years of age and possess a valid driver’s license.
• Must possess a bachelor’s degree in Electrical Engineering, Chemical Engineering, Mechanical Engineering, or Industrial Engineering.
• Must have three or more years of instrumentation experience and three or more years of direct experience in a refinery, chemical and/or manufacturing industry.
• Demonstrated knowledge and use of SPI (InTools) database and specifications.
• Proficient in the specification, troubleshooting, maintenance and overhaul of process control values.
• Demonstrated knowledge of PLC's.
• Proficient in MS office (Word, Excel, Outlook, Projects).
• Must be willing and able to perform, comply with the following:
• Wear Nomex fire retardant clothing and personal protective equipment (such as steel-toe shoes, ear, and eye protection).
• Maintain face daily so that a respirator/face mask can seal properly (some examples include being free of facial hair and/or clean shaven), climb up to 200 feet in height and work in enclosed spaces such as tanks and silos

Preferred Qualifications:
• Industry certifications (ISA)

FOSTER DESIGN'S BENEFITS:
• Working for a 54-year old company
• Minimum 10 Paid Holidays with no waiting period
• Immediate 401K participation, 1 year 100% vesting schedule, matching employer contribution
• Free Financial Consultant
• Medical/Dental/Vision/Prescription card – BCBS
• MetLife – Long Term Disability Insurance
• Vacation Pay
• Per Diem Assignment Allowance, when applicable
• Per Diem Split, when applicable
• Paid Weekly (Direct Deposit)
 
Job Number: FD-021618TX
Job Location: Borger, TX
Rate: $BOE/HR
Per Diem: Possible
Overtime: Possible
Duration: 11 Months or linger
Start Date: 03/26/2018
Input Date: 03/08/2018
Last Updated: 03/21/2018
Firm Name: FOSTER DESIGN INC
Attention: Recruiter
Address: 200 W DOUGLAS AVE STE 110
City, State: WICHITA, KS 67202
Phone: 316/832-9700
800 Phone: 800/345-3394
Fax Phone: 316/832-9357
Website: www.fosterdes.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Integration and Test Engineer - Level 2

Description:
Integration and Test Engineer - Level 2 (ACTIVE DoD SECRET CLEARANCE REQUIRED)

Location: Moorestown, NJ
Pay Rate: DOE ($47/hr - $57.50/hr)
Duration: 1 year W2 contract
Shift: First, 9/80, exempt OT
Travel: Yes, to be determined
**MUST be a U.S. CITIZEN**
**MUST have an ACTIVE DoD SECRET CLEARANCE – INTERIM SECRET CLEARANCE is SUFFICIENT**

Description
The candidate will perform the unit level test, engineering integration and test, engineering test & evaluation and support system level testing of COTS or custom computing hardware and real-time embedded signal processing firmware/software applications.
This engineer will be responsible for performing software/firmware development assignments from requirements through final testing.
This engineer will work with domain experts and military documentation to develop test software requirements, procedures, code and execute the tests.
This candidate will be responsible for designing and implementing system components using Object Oriented methods in C++.
This candidate should have an academic background and experience in: digital signal processing implementation, C/C++ programming, and simulation tools such as MATLAB.
The candidate must have excellent organizational skills, interpersonal skills and be able to communicate at both programmatic and technical levels with subordinates, peers, senior management levels and the customer.

Skill/Experience/Education (Mandatory):
ACTIVE DoD SECRET CLEARANCE
BS Degree in Electrical Engineering or Electrical and Computer Engineering.
Minimum of 8 years of professional level experience testing hardware subassemblies, nests, cabinets and systems for functional and performance requirements.
Experience in testing digital signal processing hardware and real-time software applications using C++ Object Oriented design and programming.
Configuration management and change management experience using ClearCase, ClearQuest and UCM.

Desired:
Simulation tools experience such as Matlab.
 
Job Number: 8327
Job Location: Moorestown, NJ
Rate: 47-57.50
Per Diem: Split Possible
Overtime: Exempt
Duration: 1 year
Start Date: ASAP
Input Date: 02/20/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MM-System Engineering DMSMS–Grade 04

Description:
EDUCATION
BS, Electrical/Mechanical Engineering
MS, Electrical/Mechanical Engineering

Experience as design/ component engineer with semiconductor industry, an electrical component engineer with an Avionics OEM (Original Equipment Manufacturer), or as a DMSMS (Diminishing Manufacturing Sources and Material Shortages)/Obsolescence Technical Engineer.

Provide design guidance to engineering/suppliers for use of preferred parts to minimize impact from DMSMS

Review new designs and propose replacement options for both electrical and mechanical component selections based on cost, volume, DMSMS, reliability, quality and availability.
Interface with equipment manufacturers and LRU suppliers to clarify parts support, availability and recommended resolutions.

Manage component lifecycle and Bill of Material grading through DMSMS forecast tool [e.g. Silicon Expert, IHS, Q-Star, etc.] to identify, forecast, and resolve obsolete component issues.
Investigate and close DMSMS issues from engineering, production, and/or fielded parts.
Identify and analyze critical parts and recommend resolutions for proactive monitoring efforts.

Develop processes and lead working group meetings to track status and action items for a given design or manufacturing issues regarding; DMSMS, failure analysis, corrective actions, and root cause analysis.
Measure and track internal metrics to ensure DMSMS processes are being followed and implemented.
 
Job Number: 17-699-1616
Job Location: Northeast
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 01/29/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MP&P Engineer 2

Description:
MP&P Engineer 2

Location: Huntington Beach, CA
Duration: 12+ months

Description:
Client Research & Technology is seeking a Materials, Process and Physics Engineer to function out of the Huntington Beach, California location.
The main focus of this job is to perform cross-sectioning and metallography. The position requires metallurgical and metallographic knowledge of various metals, ceramics, composites, and electronic components like diodes, capacitors, inductors, integrated circuits, transistors, etc. Some experience in the disassembly of electronic devices, such as delidding and decapsulation, is also preferred.

Responsibilities include the following:
- Assess electronic components, circuit card assemblies (CCA), and printed wiring boards (PWB) for defects and/or failures.
- Cross-section components, CCAs, and PWBs - Mount and polish using various polishing materials.
- Use metallographs to take high resolution images for analysis.
- Look for cracks, voids, and solder voids and fillets.
- Perform fracture analysis if needed.
- Analyze data, make recommendations, and write comprehensive reports.
- Coordinate and implement new engineering principles, theories, advanced technologies and concepts.
- Maintain laboratory supplies and order as needed.
- Implement lean principles and technologies.

Education / Experience:
Bachelor's degree and 2 or more years' experience or a Master's degree with experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. Preferably experience in cross-sectioning and metallography, familiarity with electronic components, CCA, and PWBs, have some knowledge of metallurgy and chemistry, and excellent verbal and written communication skills.

Skill Code: 6B2-Electrical MP&P
 
Job Location: Huntington Beach, CA
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 months
Start Date: Asap
Input Date: 12/21/2017
Last Updated: 01/19/2018
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer (PWA and LRU Assembly) CA

Description:
13701

Title TEMP Staff Manufacturing Engineer (PWA and LRU Assembly)
Job Summary General Atomics Aeronautical Systems, Inc. (GA-ASI), an affiliate of General Atomics, is a world leader in proven, reliable remotely piloted aircraft and tactical reconnaissance radars, as well as advanced high-resolution surveillance systems.

We recognize and appreciate the value and contributions of individuals with diverse backgrounds and experiences and welcome all qualified individuals to apply.

Support the design (DFM), first article, production, test, and system integration of Printed Wiring Assemblies and Line Replaceable Units for all UAV platforms including Ground Control Stations (GCS). Assemblies will include surface mount as well as through hole technology and mechanical assembly.

Duties and Responsibilities •Responsible for manufacturing process development, implementation, and continuous improvement to enhance Quality / Yield, reduce Cost, and improve Productivity / Schedule. Initiate and lead lean manufacturing process improvement projects.
•Specify and implement automation equipment and processes.
•Identify and assist in addressing safety issues on the manufacturing floor.
•Support manufacturing production planning and coordination, execution and operations process development.
•Provide production support to assemblers and leads.
•Document manufacturing processes and assembly work instructions in conjunction with T&O Planning.
•Design shop aids and tooling to assist production.
•Disposition non-conforming parts, identify root cause, and implement corrective and/or preventive action to reduce scrap and rework.
•Collaborate with Design Engineering during prototype, development and first article manufacturing.
•Expertise in assembly methods and processes, including surface mount technology, through hole technology, mechanical assembly, and testing. Experience in both analog and digital technologies as well as a background with RF.
•Experience with development and deployment of manufacturing automation and remaining current with technology.
•Experience with Electrical Schematics and Circuit Diagrams; Drawings and BOMs; Assembly Instructions; Engineering Change systems; Quality systems for non-conforming parts and corrective action. Experience with Lean Manufacturing methodologies for waste reduction, e.g.: 5S, Standard Work, TAKT, Pull System, 5S, Value Stream Mapping, cell design, and manufacturing flow.
•Clearly and effectively communicate both verbally and in written form to both technical and non-technical audiences, especially regarding manufacturing processes, engineering issues and proposed changes, and quality issues and dispositions.

Qualifications Essential Qualifications Typically requires a bachelors degree, masters degree or PhD in engineering or a related technical discipline from an accredited institution and progressive engineering experience as follows; nine or more years of experience with a bachelors degree, seven or more years of experience with a masters degree, or four or more years with a PhD. May substitute equivalent engineering experience in lieu of education. Demonstrates an extensive technical expertise and application of engineering principles, concepts, theory, and practice with the ability to organize, plan, schedule, conduct, and coordinate workloads to meet established deadlines or milestones with some experience in project leadership. Must possess the ability to understand new concepts quickly and apply them accurately throughout an evolving environment. Strong communication, presentation, and interpersonal skills are required enabling an effective interface with other departments and/or professionals, and capable of representing the organization as a prime technical contact, as well as providing leadership and guidance to less experienced professionals. Customer focused, formulates plans based on the development of innovative new designs in resolving advanced technical engineering problems. Must be able to work both independently and in a team environment. Able to work extended hours as required. A Professional Engineering License, original work(s) published in professional engineering journals, and invited to present one or more original works to an engineering symposium are desirable.
Additional Qualifications Typically requires a bachelors degree, masters degree or PhD in engineering or a related technical discipline from an accredited institution and progressive engineering experience as follows; four or more years of experience with a bachelors degree or two or more years of experience with a masters degree.
•Experience with IPC & MIL standards, including: IPC/WHMA-A-610 and 620 , J-STD-001 – Requirements for Soldered Electrical and Electronic Assemblies, MIL-STD-1553 – Digital Time Division Command/Response Multiplex Data Bus, MIL-STD-1760 – Aircraft Electrical Interconnection System, SAE-AS39029 (MIL-C-39029)– Experience implementing capital equipment in factory environment.
•Experience with MRP systems, eg SAP or MTO/WDS. Experience with Microsoft Office Project and Visio.
•Experience with programming.
•Experience with databases, e.g. Oracle and FileMaker. Knowledge of SQL.
•Experience with process mapping and demand flow technology
•Strong background in electro-mechanical assemblies.
•Six Sigma Green Belt
City San Diego
State California
Travel Percentage Required 0% - 25%
Clearance Required? No
Work Schedule Rule 9/80
Temp Assignment Duration (# of Days) 180
 
Job Number: JE-13701
Job Location: San Diego, CA
Duration: 6 month contract
Input Date: 03/05/2018
Last Updated: 03/12/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer - Level 1

Description:
Location: Lexington, KY
Rate: $20.00 - $35.00/HR
Duration: 1 year contract

**MUST be a U.S. Citizen**
**MUST have an Active Secret Clearance or to have had one with the last two (2) years**

Job Description:
- Designs manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, machining and material handling.
- Designs arrangement of machines within plant facilities to ensure most efficient and productive layout.
- Designs sequence of operations and specifies procedures for the fabrication of tools and equipment and other functions that affect product performance.
- Adapts machine or equipment design to factory and production conditions.
- May incorporate inspection and test requirements into the production plan.
- Inspects performance of machinery, equipment, and tools to verify their efficiency, and investigates and initiates corrective action of problems and deficiencies to ensure product quality.
- Develops manufacturing processes that are applicable to statistical process control, and may develop those techniques.
- Provides guidance to engineering regarding design concepts and specification requirements to best utilize equipment and manufacturing techniques.
- Ensures processes and procedures are in compliance with regulations.

Skill/Experience/Education
Mandatory:
- Mechanical, Electrical, Aerospace Engineering Degree.
- 1st, 2nd or 3rd shift schedules may be required.
- On-aircraft and off operations.
- In this role, the employee will review mechanical designs for ease of manufacturing and work closely with design engineering for improvements.
- The employee will use their knowledge of interpreting and reading engineering design drawings to develop fabrication routers/work instructions.
- This role will also require the employee to develop bill of materials (BOMs) based on drawing parts lists.
- The employee will work with manufacturing on issues and process improvements.
- Active Secret Security Clearance within the last 2 years.

Desired:
- Job scope experience
- Team Center Engineering experience
- Production Engineering experience
- Production Operations experience
- Mechanical Experience
- Electrical Experience
- Lean Six Sigma practices SOF CLSS contract, facility, and customer knowledge
- Ability to read and interpret engineering drawings
- Excellent verbal and written communications skills
 
Job Number: 7709
Job Location: Lexington, KY
Rate: $20.00 - $35.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 08/02/2017
Last Updated: 02/14/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Planner III & IV - Electrical/Electronics - (WA)

Description:
SEVERAL OPENINGS IN THE EVERETT & RENTON, WA AREAS.

Manufacturing Planners with Electrical/Electronics experience.

- Develop, implement and maintain various manufacturing plans, Bill of Materials, work instructions and illustrations to define and document as-built configuration.
- Assist with development and integration of suppliers, processes, materials, data and technology to meet manufacturing and delivery requirements.
- Assist in reviewing supplier data to ensure manufacturing related requirements are met.
- Identifies tooling requirements and initiates tooling orders based on manufacturing and engineering requirements.
- Assist in tooling dispositions.
- Investigate and resolve manufacturing related issues of limited scope.
- Assist with producibility assessments for part or product designs.
- Assist in providing input to design, manufacturing processes and manufacturing technologies to meet cost and schedules.
- Develop work statements and sequencing of events to support delivery commitments.
- Assist in the review, maintenance and monitoring of internal documents.
- Provide ship side support, research and shop assistance

Preferred Qualifications:

- Basic understanding of wiring and wire routing
- - Experience with wire bundle fabrication concepts, wire installation, electrical equipment installation and installation of wiring provisions.
Experience in Teamcenter
- Experience using Manufacturing Execution Systems (CMES)
- WIRS: Wires Information Release System
- CAPP II

AA degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience.

ACS Group (formerly 'Comforce')
 
Job Number: MPEEwa
Job Location: Renton & Everett, WA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 9+ Months
Start Date: ASAP
Input Date: 05/16/2018
Last Updated: 06/15/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

Mechanic

Description:
Perform maintenance in support of manufacturing facility on a variety of equipment throughout facility including machinery repairs, preventative maintenance, machine relocation, fabrication, welding, electrical repair and installation, plumbing (air, hydraulic, water) with use of a variety of equipment.  Responsible for monitoring hazardous waste for removal, maintenance of chemical storage area and clean up of chemical spills as required.  Nontoxic or non-hazardous.  Mainly Soap and/or grease
Will be operating a crane or fork lift.
 
Responsibilities:
Provide maintenance support in all areas of manufacturing facility including but not limited to machinery repairs, preventative maintenance, machine relocation, fabrication, welding, electrical repair and installation, plumbing (air, hydraulic, water) with use of a variety of equipment such as hand tools, welding equipment, fork lifts, and precision measuring equipment.  Maintain and develop preventative maintenance program for production related equipment.  Required to perform work in compliance to all safety and EHS policies and procedures. 
 
Qualifications:
  • Knowledge of EHS procedures and policies
  • Knowledge and safe use of production related equipment
  • Working knowledge and use of welding, electrical, and plumbing equipment including repair and maintenance of machinery
  • Millwright Skills and familiar with Electrical and/or Hydraulic
  • Able to interpret OEM handbooks and/or plant diagrams
  • Understanding of reading building plans and electrical schematics
  • Ability to use trouble-shooting and precision measuring equipment
  • Where applicable, trained in maintenance processes such as but not limited to welding, plumbing, electrical and mechanical troubleshooting
  • Vocational or technical training in a maintenance related discipline, strongly preferred

 
Training requirements:

  • Demonstrated ability to comply to maintenance safety procedures such as lock-out tags, etc.
  • Demonstrate ability to safely complete job tasks utilizing manual equipment as well as use of gauges needed for repair fabrication
  • Demonstrate ability to perform preventative maintenance, and repair of facilities equipment
  • Where applicable, complete safety and maintenance training and or certification

 
 
 
 
 

 
Job Number: 1610060095
Job Location: KS City, MO
Duration: 12 months
Input Date: 01/25/2017
Last Updated: 12/14/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Eric Khassanov
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002FtZOAA0&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer - Level 2

Description:
Location: Dallas, TX / Grand Prairie, TX
Rate: $60.00 - $65.00/HR
Duration: 1 year contract
Shift: 1st Shift


**MUST be a U.S. Citizen**
**MUST have an Active Secret Clearance or have had one within the last two (2) years**


Job Description:
- Mechanical Design Engineer to support the Tactical Missiles Advanced Programs (TMAP) area design effort.
- The candidate will work and support the lead design engineer to conduct integration activities, impact to the system, required sub-system/component modifications, and impacts to system performance studies.
- Tasks assigned may include generation of Interface Control Drawings (ICD), generation of Instructional Engineering Release (IER), creation of solid models and drawings, and performing tolerance analyses.
- Tasks will include conceptual and detail design of missile integration concept components, systems, and subsystems, and creation of 3D solid models and 2D drawings.
- Effort will require coordination of design(s) with other mechanical / electrical disciplines, familiarity with missile to aircraft integration concepts, and tolerance analysis.
- Must have Active Secret Clearance at time of submittal, preferably (but not required) within the last 5 years.
- Clearance status on resume required.


Skill/Experience/Education
Mandatory: (MUST BE SHOWN ON RESUME)
**MUST have an Active Secret Clearance or have had one within the last two (2) years**
- Candidate should have a Bachelors of Science degree in Mechanical Engineering, or 10 years of equivalent experience, and 6-8 years of Computer Aided Design software experience using PRO Engineer / CREO 3.
- Candidate must be capable of creating and interpreting detail, assembly, and installation type drawings, knowledge of Geometric Dimensioning and Tolerancing, and experience with manufacturing engineering and fabrication processes.
- Familiarity with Microsoft Office applications is desired.
 
Job Number: 7915
Job Location: Savannah, GA
Rate: $60.00 - $65.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 09/28/2017
Last Updated: 02/05/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
NX Electrical Engineer - Automotive

Description:
Design and develop vehicle 3D wire harnesses, clipping and brackets to mount components and systems using Siemens NX CAD..
Coordinate and execute the packaging development and documentation for all Mechatronics owned electrical /electronic devices and their mounting systems.
Create and maintain detailed part and assembly drawings.
Assist with selection of proper materials, tolerances, finishes, fasteners and production methods.
Analyze and provide creative, technically sound solutions to problems encountered in validation and production.
Apply Client and industry drafting and design standards, including GD&T.

BASIC QUALIFICATIONS:

Mechanical or Electrical Engineering degree or related engineering degree preferred but not required.
Siemens NX CAD experience required.
Create 3D wire harnesses, clipping and brackets to mount electrical components.
CHS Capital Harness experience preferred.
Previous electrical and electronics packaging experience preferred.
A general knowledge of automotive systems preferred.
Excellent verbal and written communication skills, as well as personal computer office automation skills are required.
 
Job Number: 3312
Job Location: Portland, ORE
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 1+ year
Start Date: ASAP
Input Date: 12/27/2017
Firm Name: OLSA RESOURCES INC
Attention: Dina Matar
Address: 3836 N BALLAST ST
City, State: PORTLAND, OR 97217
Phone: 503/608-7895
Fax Phone: 503/608-7896
Website: www.olsaresources.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Power - Refinery Exp (OK)

Description:
Electrical engineer provides project develop, technical expertise and project management in all areas related to the Ponca City Refinery’s electrical system.

The primary responsibility of this position is to provide electrical engineering for refinery capital improvement projects.

Electrical engineers occasionally have responsibilities related to instrumentation. This position will be in the Refinery Technical Services group.

Responsibilities for an Electrical Engineer include but are not limited to:

1. Develop on e-line diagrams that will accomplish the needs of a project and the reliability of the refinery.
a. How to implement enough to control cost on a project while allowing expansion in the future
b. Show protective relaying schemes.

2. Develop options and develop Substation layouts that will accomplish the need of a project and the reliability of the refinery.
c. How to implement enough to control cost on a project while allowing expansion in the future
d. Show equipment layout using appropriate working space requirements.

3. Brainstorm options and develop Medium Voltage and low voltage feeder routing using either cable tray or conduit in classified areas.
e. Use proper grounding.
f. Structural steel to run the tray on.
g. Interface between multiple engineering disciplines required to get the steel done.

4. Conduct and evaluate power studies (with ETAP) of electrical systems to verify that the new electrical equipment will work for:
h. Load Flow
i. Voltage Drop
j. Incident Energy (Arc Flash)
k. Short Circuit Current Analysis (Bracing)

5. Medium Voltage Switchgear experience in design
l. Writing specifications
m. Approve vendor (shop) drawings
n. Incorporating protective relaying schemes using Schweitzer relays
o. Familiar with GE Powervac switchgear and GE’s new Entelliguard system

6. Medium Voltage MCC’s (Specific to Allen Bradley)
p. Writing specifications
q. Approve vendor (shop) drawings
r. Brainstorm electrical schematics used to install the MCCs
s. Incorporating protective relaying schemes using Schweitzer relays

7. Medium Voltage Bus Duct
t. Writing specifications
u. Approve vendor (shop) drawings

8. Unit substation Medium & Low Voltage transformers
v. Writing specifications
w. Approve vendor (shop) drawings
x. Incorporating protective relaying schemes using Schweitzer relays

9. Low Voltage Switchgear (Schweitzer relaying and GE’s new Entelliguard)
y. Writing specifications
z. Approve vendor (shop) drawings
aa. Incorporating protective relaying schemes using Schweitzer relays
bb. Familiar with GE Powervac switchgear and GE’s new Entelliguard system

10. Low Voltage Bus Duct
cc. Writing specifications
dd. Approve vendor (shop) drawings
11. Low Voltage MCCs
ee. Writing specifications
ff. Approve vendor (shop) drawings
gg. Brainstorm electrical schematics used to install the MCCs

Minimum applicable experience is 5+ years.

Must have a BSEE Degree.

Interface with vendors, engineering contractors and construction contractors throughout a project.

Manage power requirements and coordinate with other projects in progress.

Prepare cost estimates (both budgetary and definitive) for current and future electrical projects.

Review and approve electrical drawings for projects pertaining to equipment location, one-line diagrams, electrical area classification and schematics.

Support multidisciplinary projects by providing electrical expertise and recommendations.

Plan and promote all work to be completed in a safe manner.

Perform safety inspections and project pre-startup safety reviews.

Manage electrical projects (e.g., safety, cost & schedule) from conceptual studies, design, construction and safe start-up.

Perform preliminary engineering studies by preparing project objectives letter, milestone schedule and cost estimate for current and future projects.

Application of the company standards in electrical design, equipment specifications, construction and testing.

Participate in the development of work scope for electrical equipment related to turnaround and capital projects.

Develop projects to meet Reliability Group objectives including capacity, growth, reliability, maintainability and expendability.

Application and interpretation of National Electric Code and other applicable codes and standards (e.g. NFPA, API, UL, API, etc.)

Adherence to city and county regulations including special equipment approvals (UL) and building permits.

FOSTER DESIGN'S BENEFITS:
• Working for a 54-year old company
• Minimum 10 Paid Holidays with no waiting period
• Immediate 401K participation, 1 year 100% vesting schedule, matching employer contribution
• Free Financial Consultant
• Medical/Dental/Vision/Prescription card – BCBS
• MetLife – Long Term Disability Insurance
• Vacation Pay
• Per Diem Split, when applicable
• Paid Weekly (Direct Deposit)
 
Job Number: FD-020618OK
Job Location: Ponca City, OK
Rate: $BOE/HR
Per Diem: No - but a PD Split is possible
Overtime: Yes, as needed
Duration: 11 Months or longer
Start Date: ASAP
Input Date: 02/07/2018
Last Updated: 02/23/2018
Firm Name: FOSTER DESIGN INC
Attention: Recruiter
Address: 200 W DOUGLAS AVE STE 110
City, State: WICHITA, KS 67202
Phone: 316/832-9700
800 Phone: 800/345-3394
Fax Phone: 316/832-9357
Website: www.fosterdes.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Procurement Engineer - Level 1

Description:
Procurement Engineer - Level 1

Location: Orlando, FL
Pay Rate: DOE ($35/hr - $37/hr)
Duration: 11-12 month W2 contract
Shift: First, 9/80, OT
**MUST be a U.S. CITIZEN**

Description
-Candidate will work with an integrated team including production operations, suppliers, sourcing, test engineers and other functional personnel to review and establish procurement quality flow-down requirements for commodity purchase requisitions, resolve procurement issues as well as complex supplier challenges
-Ensure nonconformance's are identified, trended and resolved in a timely manner.
-Responsibilities include performing root cause analysis, validating corrective and preventive actions attributed to factors that include supplier, design, production, process, software.
-As a vital member of the team, a Procurement Quality Engineer evaluates the designs, both electrical and mechanical, to ensure a producible product is being proposed and the supply base has processes in place for a smooth production flow.
-Evaluates and determines usage decisions on purchased parts and materials for conformity to functional performance, electrical, mechanical and system requirements, standards, specifications, and processing requirements using predetermined methods and in some cases may determine methods and sequences.
-Verifications will include using such measuring devices as micrometers, gauges, and calipers.
-Visually inspects for obvious defects or damage such as corrosion, cracks, dents, scratches, and pits.
-Verifies specifications using purchase orders, blueprints, drawing or inspection instructions, and checklists. Maintains records of results.
-Makes pass/fail decisions on inspected goods. May improvise or adapt inspection and measuring devices as needed.
-May monitor and verify quality in accordance with statistical process or other control procedures.
-Candidate will serve as a liaison to the hourly inspector for technical expertise and problem resolution.
-Individual shall build strong relationship with Receiving, Supplier Quality Engineering and Production Ops personnel and serve as the Non-conforming Area P.O.C.

Skill/Experience/Education (Mandatory):
-A Bachelor’s degree from a technical field or 4 yrs of related of professional/technical experience.
-Procurement Engineering – (4-5+ years' experience required)
-Inspection and auditing skills in an operational mfg. setting
-Basic Computer Skills - MS Office (Word, Excel and PowerPoint) SAP (COS / P2P)
-Proficiency Root Cause Analysis training.
-Auditing and inspection experience.
-Strong communications skills - verbal/written
-Interpersonal Skills, Work Independently, Self Starter
-Strong understanding of engineering requirements
-Must be able to identify/document supplier's quality deficiencies and ensure effective corrective action
-Capable of performing root cause analysis and identifying solutions to complex problems
-Understanding engineering drawings requirements mechanical and electrical inspection methods
-A basic understanding of special processes and an overall understanding of how to manage and interface with suppliers on a daily bases to support the Program
-Ability to focus on continual improvement practices using causal analysis tools to drive corrective and preventive actions
-Must have knowledge and understanding of critical design attributes and auditing capabilities
-Strong organizational skills w/the ability to work in a dynamic environment, multi-task, meet deadlines
-Strong communication skills (both oral and written) will be necessary to support the assignment and weekly reports
-Must be able to effectively communicate and interface with Quality Program Management, Engineering, Supplier Quality Management, Sub-contracts (Buyers) and Government Representatives
-This position will be located at a facility that requires special access and requires the selected candidate to be a US Citizen

Desired:
-Must be able to effectively communicate and interface with Suppliers, Quality Program Management, Engineering, Supplier Quality Management, Sub-contracts (Buyers) and Government Representatives
-Must be able to effectively communicate and interface with Suppliers, Quality Program Management, Engineering, Supplier Quality Management, Sub-contracts (Buyers) and Government Representatives
-A basic understanding of the MFC SAP and P2P business systems
-ASQ Certification or Lean Six Sigma Certification (Green Belt/Black Belt)
-Experience with working with suppliers in a dynamic environment
-Experience with performing First Article Inspections to AS9102 requirements
-Experience with source inspection and surveillance activities at suppliers
-Strong understanding of AS9100 and ISO 9001 Quality Management Systems
 
Job Number: 8103
Job Location: Orlando, FL
Rate: 35-37
Per Diem: Split Possible
Overtime: Possible
Duration: 11 months
Start Date: ASAP
Input Date: 10/17/2017
Last Updated: 02/05/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Manager III Technical ( Plymouth, MN ) 7851097

Description:
Project Manager III Technical ( Plymouth, MN ) 7851097
5 month plus contract

Pay rate: $50 - 75 /hr depending on experience


**Will develop special test equipment. Need asst. tracking projects and scheduling tasks (juggling ~15 programs.) Will use a system to help manage workloads/deadlines.
Will Set up the Master Project Plan. Bachelors is important (Electrical Eng.) Labview exp key, PMP Cert REQUIRED.
Military exp is helpful. Should have exp in a relevant industry.
Will need to meet basic quals. listed below. In interview, will ask about exp w/ tools listed below.
Will ask if have designed electrical circuit boars, use of tools, and level of knowledge.
Will ask about Labview - installation, programming, and architecture. If have military exp, will ask about results achieved.

Program team consists of ~9 test eng. supporting ~12 programs at a time. Will report to Dir. of Eng and get direction from a Prog. Mgr.**

Creates, maintains, and tracks projects for special electronic and guidance subsystem test equipment. Ensures project content is delivered on-time and within budget. Assembles a resource-loaded master schedule for all projects in the special test equipment team and identifies recommended actions for resources and schedule. Prepares reports for upper management regarding status of projects.

Required qualifications:
Bachelor's degree
PMP certification
2 years experience as a project manager or program manager
U.S. citizen

Preferred qualifications:
Bachelor's degree in Electrical Engineering
5 years experience as a project manager or program manager
Experience as non-commissioned officer in the military
Experience in LabView programming
Experience managing projects in the aerospace or defense industries
Ability to travel 10-25% of the time within the US for launch events
 
Job Number: 7851097
Job Location: Plymouth, MN
Rate: 75
Per Diem: Split
Overtime: YEs
Duration: 5 month
Start Date: ASAP
Input Date: 01/01/2018
Firm Name: TALENTPRO CONSULTING
Attention: Tim
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X101
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Reliability & Maintainability Engineer

Description:
Reliability & Maintainability (R&M)
Approximately 12 month contract
Fort Worth, TX

Please send resumes to tmcilrath@butler.com.

Job Description:
The R&M Engineer IV is responsible for developing, managing and communicating the reliability & maintainability methodology for a new military development program to internal and external customers.

Positioning Responsibilities:
%u2022 Develop and communicate R&M approach and methodology to management.
%u2022 Determine System level R&M targets and work with IPTs to develop IPT level targets.
%u2022 Work closely with IPTs to review evolving design and provide Design-For-R&M input into their decisions, providing R&M impacts to all Design Decision Notices.
%u2022 Track designs and develop R&M estimates based on preliminary and detail design layouts.
%u2022 Suggest design improvements / spiral opportunities to improve R&M.
%u2022 Coordinate and manage the execution of system level FMECAs
%u2022 Coordinate across design, logistics and maintenance teams to ensure a robust aircraft sustainment plan is established.

Education Requirements:
%u2022 Bachelor's Degree in Mechanical, Electrical, Aerospace or Systems Engineering is required.

Position Requirements:
%u2022 10+ years aerospace engineering experience.
%u2022 Previous Military Logistics or Maintenance experience is preferred.
%u2022 Must have the ability to communicate efficiently and effectively to coordinate R&M activities, prioritize tasks, and report status.
%u2022 Must be able to build and maintain effective relationships with customers, internal and external suppliers, as well as horizontal integrations across the other teams.
%u2022 Familiarity with aerospace design and verification processes to include; requirements develop and verification, preliminary and detailed design, MRP, Planning, Manufacturing, Procurement and Maintenance processes is preferred.
%u2022 PC proficiency in Microsoft Word, Excel, PowerPoint, and Outlook is required.
%u2022 Must have the ability to work effectively within a team.
%u2022 Good interpersonal and organizational skills are required.
 
Job Number: 52929
Job Location: Fort Worth, TX
Rate: DOE
Duration: Apprioxmately 12 month
Start Date: January 2018
Input Date: 12/20/2017
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Taylor McIlrath
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Reliability Engineer - Level 2

Description:
Reliability Engineer - Level 2

Location: Orlando, FL
Pay Rate: DOE ($40/hr - $60/hr)
Duration: 1 year contract
Shift: First, 9/80, exempt OT
**MUST have an ACTIVE SECRET CLEARANCE**

Description
-Built-In-Test (BIT) Engineer to execute BIT program on DoD System, to include BIT allocations, predictions, modeling, and Failure Modes, Effects and Criticality Analysis (FMECA).
-The engineer will monitor suppliers in the development and implementation of BIT architecture, requirements and implementation.
-Conduct analysis and review of data from system and supplier test events and failures to identify issues and mature the BIT system through corrective action.
-Prepare and present at design and program reviews.
-Develop BIT DRSs and support hardware design activities.
-Support SW Engineers in the implementation of BIT requirements in SRS's.
-Generate and maintain BIT maturity metrics.
-Perform Reliability and BIT testing as necessary.
-Provide Reliability support as required.

Skill/Experience/Education (Mandatory):
- Active Secret security clearance
- Experience conducting Reliability efforts and testing and verification to include experience with performing reliability predictions, and Failure Mode, Effects, and Criticality Analysis (FMECA)
- Experience with Windchill Quality Solutions Reliability software tool or equivalent tool
- Experience with reliability Failure Reporting, Analysis, and Corrective Action System (FRACAS)
- Maintainability and Testability/Built-In-Test (BIT) engineering experience to include BIT Architecture definition and BIT analysis
- Strong interpersonal skills and an ability to build effective working relationships
- Strong oral and written communication skills, technical writing experience, and an ability to communicate findings to customers and management

Desired:
- Electrical Engineering degree.
- Strong electrical background with a good mechanical understanding.
- Diagnostic algorithm development – diagnostic tests/procedures to perform fault detection and fault isolation.
- Software skills – Ability to read code and design requirements for software engineers to write BIT tests.
- Ability to teach others BIT / testability.
- Practical hands on experience with hardware test and troubleshooting.
- Familiarity and ability to model systems with US Army Materiel Systems Analysis Activity (AMSAA) Reliability Growth Planning Models (PM2-Continuous and PM2-Discrete), Reliability Growth Tracking Model (RGTM-C), Reliability Growth Projection Models (ACPM, AMPM, and ADPM), and Reliability Test Planning Tools (IPT-C and IPT-D)
 
Job Number: 7873
Job Location: Orlando, FL
Rate: 40-60
Per Diem: Split Possible
Overtime: Yes, exempt
Duration: 1 year
Start Date: ASAP
Input Date: 09/25/2017
Last Updated: 02/05/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
SD-Tech Pubs-LSA-3.Advanced

Description:
The Canadian Maritime Helicopter Program (CMHP) Program is looking for a talented and motivated Logistics Support Analyst to support the development and sustainment of the CMHP CH-148 Publications. Candidate will report directly to the CMHP Integrated Product Team (IPT) Lead - LSA personnel. The maintenance program is developed in the Client
Maintainability System (SAMS) and provides the framework for the maintenance publications. The Technical manual series for this program is prepared in accordance with S1000D authoring specification and delivered in an Interactive Electronic Technical Manual (IETM) product. This IETM contains principles of Operation, Maintenance, Illustrated parts Breakdown, and
Testing/Troubleshooting procedures inclusive of system diagnostics.

The primary purpose of the Logistic Support Analysis process is to provide up-front design influence to enhance overall aircraft supportability and operational readiness, while reducing the life cycle cost. The overall objectives of the Logistic Support Analysis are to establish, validate and update the maintenance concept for the entire aircraft life cycle.

The Logistic Support Analyst position requires technical knowledge of the UH-60/S70, SH-60/S70B, S-92/H92 helicopters with experience involving a broad knowledge of Helicopter / Aircraft mechanics, electrical/electronics maintenance and support functions including Component Inventory, Trade Studies, Data Analysis, and Modeling. The position also involves the application of Logistic principles to support Helicopter Maintenance and related support functions which includes Electrical / Electronic/Mechanical System Operational Analysis, and Maintenance Tasking. Familiarity with engineering drawing interpretation, maintainability and reliability principles, assembly and disassembly methods and manufacturing and inspection methods is required.
 
Job Number: 17-705-1514
Job Location: Northeast
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 03/21/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Safety Engineer / Sr. Safety Engineer WA

Description:
Job Title: Safety Engineer/Sr. Safety Engineer
Keywords:
Number of Positions: 1

Remaining Positions: 1

Duties:


Performs safety engineering assignments requiring a wide application of advanced principles, theories, and concepts in the field plus a working knowledge of other related disciplines. This position will have a prominent role within the Environmental Health and Safety Team and will work closely with the Operations and Facilities departments.

Essential Job Functions:

25% - Develops safety procedures to protect employee health and safety and that comply with applicable safety standards for a wide variety of processes and situations



25% - Uses a variety of computer software to manage safety data, analyze trends, and generate compliance reports



20% - Identifies, evaluates, and recommends corrective action on unusual safety hazards requiring special safety considerations



15% - Provides Ergonomic evaluations and recommendations for employees in both manufacturing and office environments



10% - Conduct safety training to small or large groups from prepared safety training packages



5% - Reviews new legislation or regulations affecting the safe operation of equipment, facilities, etc. and determines safety implications



Physical Requirements and Work Environment:

This position will typically work under office conditions where the noise level in the work environment is low. However, moderate travel within manufacturing and testing areas is required. The individual may occasionally be exposed to outside conditions, moving mechanical parts, tight or precarious places, vibrations, chemicals, hazardous materials and noise. The use of Personal Protective Equipment and the ability to lift up to thirty-five pounds is required.

Skills:
Ability to set goals and prioritize work activities with minimal supervision. Continuously demonstrate high commitment to safety through personal actions.

Safety Professional Certification is highly desirable.


Education:
BS degree in Safety or Engineering (Chemical, Mechanical, or Electrical Engineering preferred) and 5 years of directly related experience, or an equivalent combination of education and experience. *Requires U.S. Citizenship*

Languages:
English Read Write Speak
Certifications & Licenses:
Safety Professional Certification is highly desirable.

Skills:
Required
ENGINEERENVIRONMENTAL HEALTHERGONOMICHAZARDOUS MATERIALSOPERATIONS
Additional
SAFETY PROCEDURESSAFETY STANDARDSTESTINGCORRECTIVE ACTIONELECTRICAL ENGINEERINGERGONOMICSLOCKOUT/TAGOUTMACHINE SAFETYRELIABILITY/SAFETYSAFETY ENGINEERINGSAFETY TRAININGTRAINING
Languages:
English( Speak, Read, Write )
Minimum Degree Required: Bachelor's Degree

State/Province: Washington
City/Town: Redmond

Start Date: 01/08/2018 Hours Per Week: 40.00
Est. End Date: 12/21/2018 Hours Per Day: 9.00
Schedule Notes: Days Per Week: 5.00
 
Job Number: MB-7633766
Job Location: Redmond, WA
Rate: 50/hr max
Duration: 12 month contract
Input Date: 01/17/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Simulation & Software Engineer

Description:
Simulation & Software Engineer
Savannah, GA
Long Term Contract
$58.00-63.00/Hr

Unique Skills:
1. Matlab/Simulink experience modeling real time aircraft systems
2. Aerospace background with avionics lab testing experience
3. Ability to understand aircraft electrical wiring diagrams as it relates to HIL simulation
4. Experience with high level programming or scripting language such as C/C++, Python
5. Knowledge of data protocols used in aerospace
6. Experience modeling aircraft systems in real time on industry standard simulation platforms (eg NI, Speedgoat, Dspace,ADI)
7. Flight and/or aircraft system lab HIL simulation experience
8. Ability to work independently and self-govern priorities in accordance with lab customer needs

Job Description
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description.5 ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

Principal Duties and Responsibilities: Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7079
Job Location: Savannah, GA
Rate: 58.00-63.00/Hr
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 02/22/2017
Last Updated: 02/14/2018
Firm Name: INCONEN CORPORATION
Attention: Brad
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer with active secret / Matlab Simulink CA

Description:
160101
Requirement #AERO-REQ-0625
Work Location Palmdale, CA
Work WeeK 9/80-A
Priority High
Needed Date 08/29/2017
End Date 05/29/2018
Number of Resources 1
Security Clearance Secret (Prime Contract:, Can start w/o clearance:No, Interim Clearance Sufficient:No)


Title: Software Engineer

Description
Develop, analyze, integrate, and test flight control laws and embedded software for the Advanced Development Programs (ADP, Skunk Works) Flight Control and Vehicle Management Systems Integration team. Contribute to software requirements, design, code, reviews, and test of operational flight programs. Good oral and written communication skills required as is the ability to flex and adapt in a fast-paced team environment. Selected applicant will be subjected to government security investigation and must meet eligibility requirements for access to classified information and special program clearances
Candidate must possess an active SECRET clearance.

Skill/Experience/Education
Mandatory:

Candidate must have Flight Control system experience and Experience with MATLAB, OR Simulink
Candidate must possess an active SECRET clearance.
Desired:

Bachelor's Degree in Electrical, Mechanical or Aerospace Engineering


Interview Required Yes
OT Allowed Yes (OT Limitation: No)
Travel No
Non-Exempt
Rates
0-4 Yrs Pay Rate: 65.00 USD
5-8 Yrs Pay Rate: 70.00 USD
9+ Yrs Pay Rate: 75.00 USD
 
Job Number: JE-0625
Job Location: Palmdale, CA
Rate: 65-75/hr DOE
Per Diem: no
Duration: 9 month contract
Input Date: 04/18/2018
Last Updated: 04/19/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Specialist Systems Engineer IV

Description:
Specialist Systems Engineer IV

Location: Huntsville, AL
Pay Rate: DOE ($50/hr - $68/hr)
Duration: 6+ month W2 contract
Shift: 9/80, OT possible
** Candidates must be U.S. Citizens. Dual Citizens or non-U.S. passport holders are NOT acceptable **
** Must be eligible to obtain and maintain a DoD Secret Clearance **

Duties:
-Without appreciable direction and exercising considerable latitude in determining technical objectives and approaches to assignments, performs in a largely independent role for the Systems Engineering organization.
-Typical responsibilities include: May plan, conduct, and provide technical Systems Engineering direction on projects or major phases of significant project assignment, coordinating the efforts of technical support staff in the performance of assigned projects.
-Requires the use of advanced Systems Engineering techniques in management of requirements and risk for developing rocket propulsion systems.
-Assesses the feasibility and soundness of proposed engineering evaluation tests, products or equipment when necessary data are insufficient or confirmation by testing is advisable.
-Represents the organization in conferences to resolve important questions and to plan and coordinate work. May direct, coordinate and review the work of a small staff of engineers and/or technicians; estimates personnel needs and schedules and assigns work to meet completion date.
-Or, as individual researcher or staff specialist may be assisted on projects by other engineers or technicians. Develops solutions to complex problems which require the use of ingenuity and creativity.
-Work is reviewed at extended intervals for desired results and achievement. Contacts include interacting with customer personnel on technical matters often requiring coordinated activity across organizational lines.

Breakdown:
60% - Develops hardware and software requirements for rocket propulsion systems product development. Responsible for derivation, allocation, and documentation of requirements in a requirements database. Responsible for the development and maintenance of system, subsystem, and component specifications. Coordinates requirements and related specification change management with IPT members. Defines and coordinates requirements verification plans with integrated product team members, plans and manages compliance assessment and certification.
15% - Performs functional analysis in support of requirements development effort. Supports and/or coordinates system trade studies. Coordinates selection of optimized concept baselines through benefit/cost trades in support of definition of system architecture and objectives.
15% - Coordinates project risk assessment and management and prepares and reports results on mitigation plans.
10% - Communicates results in oral presentations and written communication.

Skills:
-9 years minimum directly related industry experience in Systems Engineering disciplines (requirements development and management, risk management, and system integration) across the full product development life-cycle for aerospace/rocket propulsion system design and development.
-Experience with requirements management software (IBM Rational DOORS, IBM Requisite Pro, etc.).
-Experience with Microsoft Access strongly desired


Education:
-Bachelor degree in Systems Engineering or appropriate discipline/science (Mechanical/Electrical/Aerospace).
-Advanced degree desirable.
-Coursework in Systems Engineering (requirements management, risk management, product development cycle) disciplines and rocket propulsion strongly desired.
-Trained/experienced in Microsoft Office, IBM Rational DOORS

Skills Required:
AEROSPACE SYSTEMS ENGINEERING
 
Job Number: 8440
Job Location: Huntsville, AL
Rate: 50-68
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 12/19/2017
Last Updated: 01/09/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Specialist Systems Engineer IV

Description:
Specialist Systems Engineer IV

Location: Canoga Park, CA
Pay Rate: DOE ($50/hr - $75/hr)
Duration: 6 month W2 contract
Shift: Regular 40 hour week, OT possible
** Candidates must be U.S. Citizens. Dual Citizens or non-U.S. passport holders are NOT acceptable **

Duties:
-Without appreciable direction and exercising considerable latitude in determining technical objectives and approaches to assignments, performs in a largely independent role for the Systems Engineering organization.
-Typical responsibilities include: May plan, conduct, and provide technical Systems Engineering direction on projects or major phases of significant project assignment, coordinating the efforts of technical support staff in the performance of assigned projects.
-Requires the use of advanced Systems Engineering techniques in management of requirements and risk for developing rocket propulsion systems.
-Assesses the feasibility and soundness of proposed engineering evaluation tests, products or equipment when necessary data are insufficient or confirmation by testing is advisable.
-Represents the organization in conferences to resolve important questions and to plan and coordinate work. May direct, coordinate and review the work of a small staff of engineers and/or technicians; estimates personnel needs and schedules and assigns work to meet completion date.
-Or, as individual researcher or staff specialist may be assisted on projects by other engineers or technicians. Develops solutions to complex problems which require the use of ingenuity and creativity.
-Work is reviewed at extended intervals for desired results and achievement. Contacts include interacting with customer personnel on technical matters often requiring coordinated activity across organizational lines.

Breakdown:
60% - Develops hardware and software requirements for rocket propulsion systems product development. Responsible for derivation, allocation, and documentation of requirements in a requirements database. Responsible for the development and maintenance of system, subsystem, and component specifications. Coordinates requirements and related specification change management with IPT members. Defines and coordinates requirements verification plans with integrated product team members, plans and manages compliance assessment and certification.
15% - Performs functional analysis in support of requirements development effort. Supports and/or coordinates system trade studies. Coordinates selection of optimized concept baselines through benefit/cost trades in support of definition of system architecture and objectives.
15% - Coordinates project risk assessment and management and prepares and reports results on mitigation plans.
10% - Communicates results in oral presentations and written communication.

Skills:
-9 years minimum directly related industry experience in Systems Engineering disciplines (requirements development and management, risk management, and system integration) across the full product development life-cycle for aerospace/rocket propulsion system design and development.
-Experience with requirements management software (IBM Rational DOORS, IBM Requisite Pro, etc.).


Education:
-Bachelor degree in Systems Engineering or appropriate discipline/science (Mechanical/Electrical/Aerospace).
-Advanced degree desirable.
-Coursework in Systems Engineering (requirements management, risk management, product development cycle) disciplines and rocket propulsion strongly desired.
-Trained/experienced in Microsoft Office.

Skills Required:
AEROSPACE SYSTEMS ENGINEERING
 
Job Number: 8319
Job Location: Canoga Park, CA
Rate: 50-75
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 01/12/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Specialist Systems Engineer IV / hardware experience in the requirements, integration and risk discipline of Systems Engineering / propulsion hardware CA

Description:
160779/7616417

Job Title: Specialist Systems Engineer IV
$75/hr max
Looking for hardware experience in the requirements, integration and risk discipline of Systems Engineering. Would prefer this experience to be in propulsion hardware.


Number of Positions: 1

Remaining Positions: 1

Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **





Without appreciable direction and exercising considerable latitude in determining technical objectives and approaches to assignments, performs in a largely independent role for the Systems Engineering organization. Typical responsibilities include: May plan, conduct, and provide technical Systems Engineering direction on projects or major phases of significant project assignment, coordinating the efforts of technical support staff in the performance of assigned projects. Requires the use of advanced Systems Engineering techniques in management of requirements and risk for developing rocket propulsion systems. Assesses the feasibility and soundness of proposed engineering evaluation tests, products or equipment when necessary data are insufficient or confirmation by testing is advisable. Represents the organization in conferences to resolve important questions and to plan and coordinate work. May direct, coordinate and review the work of a small staff of engineers and/or technicians; estimates personnel needs and schedules and assigns work to meet completion date. Or, as individual researcher or staff specialist may be assisted on projects by other engineers or technicians. Develops solutions to complex problems which require the use of ingenuity and creativity. Work is reviewed at extended intervals for desired results and achievement. Contacts include interacting with customer personnel on technical matters often requiring coordinated activity across organizational lines.



60% - Develops hardware and software requirements for rocket propulsion systems product development. Responsible for derivation, allocation, and documentation of requirements in a requirements database. Responsible for the development and maintenance of system, subsystem, and component specifications. Coordinates requirements and related specification change management with IPT members. Defines and coordinates requirements verification plans with integrated product team members, plans and manages compliance assessment and certification.



15% - Performs functional analysis in support of requirements development effort. Supports and/or coordinates system trade studies. Coordinates selection of optimized concept baselines through benefit/cost trades in support of definition of system architecture and objectives.



15% - Coordinates project risk assessment and management and prepares and reports results on mitigation plans.



10% - Communicates results in oral presentations and written communication.

Skills:
-9 years minimum directly related industry experience in Systems Engineering disciplines (requirements development and management, risk management, and system integration) across the full product development life-cycle for aerospace/rocket propulsion system design and development.

-Experience with requirements management software (IBM Rational DOORS, IBM Requisite Pro, etc.).

Education:
-Bachelor degree in Systems Engineering or appropriate discipline/science (Mechanical/Electrical/Aerospace).

-Advanced degree desirable.

-Coursework in Systems Engineering (requirements management, risk management, product development cycle) disciplines and rocket propulsion strongly desired.

-Trained/experienced in Microsoft Office.

Skills:
Required

AEROSPACE SYSTEMS ENGINEERING

State/Province: California
City/Town: Canoga Park

Start Date: 12/18/2017 Hours Per Week: 40.00
Est. End Date: 06/17/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7616417
Job Location: Canoga Park, CA
Rate: 75/hr max
Duration: 6 month contract
Input Date: 12/19/2017
Last Updated: 01/12/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr Electrical Engineer I – ability to obtain and hold a DoD secret security clearance TX AL AZ

Description:
Sr Electrical Engineer I – Clearance 7317193 - $75.00 HR

Senior Designer or Electrical Engineer with
understanding and wide application of technical theories, and concepts in digital design, with general
knowledge of other related disciplines. The Senior
Designer provides technical solutions to a wide range
of difficult problems. This position will function in a
multi-disciplined design team. The person will be the
Responsible Engineering Authority (REA) for
hardware design, fabrication, assembly, test, and
integration of a circuit card. Designs include
technology of processors, FPGAs, memory, and
industry interfaces, such as PCIe, Ethernet, I2C,
UART. Candidates can independently determine and
develop approach to solutions to contribute to the
completion of specific programs and projects.

Required Skills: U.S. Citizenship required • A minimum of 4 years’ experience in Digital Design • Proven ability to take a design concept from the block diagram or requirements level and develop a complete hardware design • Experience with PCB design tasks and proven ability to use tools to design (schematic capture), analyze and simulate designs prior to hardware execution. • Experience with embedded test techniques, design for test, design margin analysis and circuit design for production • A strong advocate for process improvement • A self-motivated and effective communicator • Experience in managing schedule and resources to meet assigned milestones • Ability to obtain and retain security clearance Desired Skills: • Experience using Mentor Graphics Design Creation tools: DxDesigner, xDX Designer VX, and Constraint Editor System (CES) • Experience using Mentor Graphics PCB electronic circuit design software: HyperLynx signal integrity, power integrity, and analog simulation, Xpedition Enterprise (xPCB) • Six Sigma specialist • Existing Secret security clearance Required Education (including Major): Bachelor’s Degree in Electrical Engineering (MS preferred) or similar degree and meets the experience requirements This position requires the ability to obtain and hold a DoD secret security clearance.
 
Job Number: MB-7317193
Job Location: McKinney, Huntsville, Tucson, TX, AL, AZ
Rate: 75/hr max
Duration: 18 month contract
Input Date: 12/01/2017
Last Updated: 01/03/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr Electrical Engineer II - Clearance / ability to obtain a Secret security Clearance AZ TX AL

Description:
Sr Electrical Engineer II – Clearance 7317190

Senior Designer or Electrical Engineer to contribute
to the design, analysis, simulation, test, and
integration of digital electronic modules and/or CCAs
for Missile applications. The Senior Electrical
Engineer must be experienced in all aspects of circuit
card design from concept through delivery to higher
level assemblies as evidenced by multiple successful
design completions (including hardware designs with
processors, FPGAs, memory, and industry interfaces,such as PCIe, Ethernet, I2C, UART). This position
will function in multi-disciplined design teams across
multiple projects. This person will be the
Responsible Engineering Authority (REA) for
development of one or more complex modules, CCAs
or units and will be expected to apply rigorous and
systematic design processes to ensure total design
compliance. This position will interface with
Integrated Product Team Leads (IPTL) and stake
holders to ensure program objectives are achieved.
The position requires frequent use and application of
technical standards, principles, concepts and
techniques. Candidates will be expected to provide
solutions to a variety of technical problems of
moderate scope and complexity, working under
general supervision. Successful candidate should
expect to be immersed in a fast-paced, team-based,
and challenging technical environment where an
individual with talent and initiative can stand out and thrive.

Required Skills: • U.S Citizenship required The ability to obtain and retain a Secret security Clearance • Minimum of 6 years Engineering design experience, with at least 2 years in a senior position • A self-motivated and effective communicator • Ability to prioritize work of others and handle multiple tasks at a time • Experience in the development and design of electronic circuit designs, multi-assembly system/unit design, processor designs a plus • Proven ability to take a design concept from the block diagram or requirements level and develop a complete hardware design, and verifying via test and integration • Experience with PCB design tasks and proven ability to use tools to design (schematic capture), analyze and simulate designs prior to hardware execution. • Experience with embedded test techniques, design for test, design margin analysis and design for production • A strong advocate for process improvement • Experience in managing schedule and resources to meet assigned milestones • Capable of functioning in multi-disciplined design teams across multiple projects Desired Skills: • Experience using Mentor Graphics Design Creation tools: DxDesigner, xDX Designer VX, and Constraint Editor System (CES) • Experience using Mentor Graphics PCB electronic circuit design software: HyperLynx signal integrity, power integrity, and analog simulation, Xpedition Enterprise (xPCB) • Experience with intellectual property generation (patents & publications) • Team and project leadership skills • Knowledge of software and/or FPGA code development • Experience leading a program transition from development to production • Demonstrated ability to manage technical and schedule risks and to identify cost reduction opportunities • Knowledgeable in cost/schedule development and management Required Education (including Major): Bachelor’s Degree in Electrical Engineering (MS preferred) or similar degree and meets the experience
 
Job Number: MB-7317190
Job Location: McKinney, Huntsville, Tucson, TX, AL, AZ
Rate: open rate
Duration: 18 month contract
Input Date: 01/03/2018
Last Updated: 01/03/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Electrical Design Engineer - no C2C

Description:
Johnson Service Group (JSG) is searching for a talented contract Sr. Electrical Design Engineer with circuit level analysis and design experience.

We are seeking a senior electrical with a background in Aerospace, Automotive, Defense and related products/applications.

Summary of Job Scopes:

4-6+ years of electrical engineering experience, focused on circuit level analysis and design, mixed signal, and sensor integration.
Must be proficient with Mentor Graphics DxDesigner.
Layout of high complex hardware boards and derivatives.
Ability to run existing standard tools (e.g. layout tools, circuit analysis, dynamic simulation, etc.).
Proficient knowledge of engineering quality systems, including PLC, engineering change, configuration management, etc.
Solid understanding of component function and testing requirements.
Education: BS Degree in Electrical Engineering or a related technical discipline.
 
Job Number: 362234
Job Location: Niles, IL
Rate: DOE
Per Diem: yes
Overtime: possible
Duration: 3 to 6 months
Start Date: asap
Input Date: 11/30/2017
Last Updated: 01/08/2018
Firm Name: JOHNSON SERVICE GROUP
Attention: Rich Martinsen
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Safety Engineer

Description:
Safety Engineer/Sr. Safety Engineer

Location: Redmond, WA
Pay Rate: DOE ($45/hr - $50/hr)
Duration: 1 year W2 contract
Shift: not specified
**MUST be a U.S. CITIZEN**

Duties:
Performs safety engineering assignments requiring a wide application of advanced principles, theories, and concepts in the field plus a working knowledge of other related disciplines. This position will have a prominent role within the Environmental Health and Safety Team and will work closely with the Operations and Facilities departments.

Essential Job Functions:
25% - Develops safety procedures to protect employee health and safety and that comply with applicable safety standards for a wide variety of processes and situations
25% - Uses a variety of computer software to manage safety data, analyze trends, and generate compliance reports
20% - Identifies, evaluates, and recommends corrective action on unusual safety hazards requiring special safety considerations
15% - Provides Ergonomic evaluations and recommendations for employees in both manufacturing and office environments
10% - Conduct safety training to small or large groups from prepared safety training packages
5% - Reviews new legislation or regulations affecting the safe operation of equipment, facilities, etc. and determines safety implications

Physical Requirements and Work Environment:
This position will typically work under office conditions where the noise level in the work environment is low. However, moderate travel within manufacturing and testing areas is required. The individual may occasionally be exposed to outside conditions, moving mechanical parts, tight or precarious places, vibrations, chemicals, hazardous materials and noise. The use of Personal Protective Equipment and the ability to lift up to thirty-five pounds is required.

Skills:
-Ability to set goals and prioritize work activities with minimal supervision. Continuously demonstrate high commitment to safety through personal actions.
-Safety Professional Certification is highly desirable.

Education:
BS degree in Safety or Engineering (Chemical, Mechanical, or Electrical Engineering preferred) and 5 years of directly related experience.

Skills Required
ENGINEER ENVIRONMENTAL HEALTH ERGONOMIC HAZARDOUS MATERIALS OPERATIONS
 
Job Number: 8391
Job Location: Redmond, WA
Rate: 45-50
Per Diem: Split Possible
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 01/23/2018
Last Updated: 02/14/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Staff Systems Electrical Engineer - No C2C

Description:
Johnson Service Group (JSG) is searching for a Staff Systems Electrical Engineer, capable of leading the design and development of main engine controls, including Full Authority Digital Engine (or electronics) Control (FADEC). This critical role will support the digital engine control design and development for Commercial and Defense aircraft turbine engines.

The Staff Systems Electrical Engineer is responsible for support of system development, leadership support, collaboration and process improvement, including Product Lifecyle (PLC) Management.

Summary of Job Scopes:

8-10+ years of related electrical engineering experience, ideally with a background in electronics or software design, within the Aerospace and Defense industries.
Will lead System Requirements Definition and Partitioning and flow down from higher level system to LRU components.
Will derive the requirements from the analysis of the primary system and establishes acceptance criteria for these requirements.
Able to resolve and negotiate requirement conflicts in order to establish a complete and consistent requirement set for the system.
Responsible for system verification and validation, including test plan writing.
Ability to drive System Architecture Definition and Design implementation, as well as System/Component Interface Management.
Motion Control Simulation/Analysis experience, including MATLAB SIMULINK or similar tools.
Familiarity with DOORS or similar Requirements management and Traceability tools.
Familiarity with Aerospace industry and the product development processes, including ARP4754, DO-178, DO-254, etc.

Education:

Bachelor's Degree in Electrical Engineering or a similar technical discipline
Master's Degree in Electrical Engineering or a similar technical discipline is a plus
Type of employment: Full time salaried position

Location: Chicago, IL
 
Job Number: 361925
Job Location: Chicago, IL
Rate: $125k/yr
Per Diem: no
Overtime: possible
Duration: Direct Hire
Start Date: asap
Input Date: 01/19/2018
Last Updated: 01/19/2018
Firm Name: JOHNSON SERVICE GROUP
Attention: Rich Martinsen
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer

Description:
Systems Engineer
East Aurora, NY
~12 month contract





SUMMARY or MAJOR FUNCTION OF THE JOB


The System Design Engineer participates in defining the overall technical solution by interfacing directly with project management and design engineers with the goal of providing system level architectures and trade spaces necessary to support the end-users technical, financial and schedule needs. Primary activities include creation of system architecture, performance prediction, system sizing analysis, creating technical requirements baselines and Verification and Validation planning.


JOB REQUIREMENTS
•Create detailed product sizing and performance prediction analysis to support requirements generation for new products through the use of models, simulation and mathematical analysis.
•Support the development of system level solution architecture with the assistance of senior level design and system engineers.
•Contribute to product development by creating and executing detailed Verification and Validation plans and procedures for development and qualification testing of components and subsystems. This is to include definition of required test equipment.
•Lead the development of component level requirements that are fully traceable to system level requirements. Write specifications to capture these requirements.
•Participate in the integration and test of components and subsystems.
•Create concise reports and proposal write-ups that describe the design decisions and analysis results.
•Be a key contributor to the preparation of successful proposals. Contributions to include verification and validation approaches, component level design requirements, requirements compliance assessment, cost estimates and technical write-ups.
•Represent the company in a manner consistent with its strong technical reputation.
•Some travel is required. This is estimated to be 8 trips per year to visit customers, vendors or other company sites.

REQUIRED QUALIFICATIONS
•Masters of Science Degree in Electrical, Mechanical, Aerospace or Systems Engineering with 3 years of design / development experience is required◦An acceptable alternative is a Bachelor of Science Degree in Engineering plus 6 years of experience in a design / development engineering. A Bachelor of Science degree in Engineering Technology is not acceptable.

•4 years of progressive experience in the field of Engineering is preferred.
•Proven general capabilities/competencies in Initiating Action, Customer Focus, and Building Strategic Working Relationships.
•Proven specific capabilities/competencies in Modeling and Simulation, Verification and Validation Methods, Control System Design, Integration and Test.
 
Job Number: 52987
Job Location: East Aurora, NY
Rate: 55
Per Diem: Possible
Overtime: Possible
Duration: ~12 months
Start Date: ASAP
Input Date: 01/03/2018
Last Updated: 01/10/2018
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
TH - Avionics Systems Integration - 10+

Description:
PURPOSE
We are currently seeking an Avionics Engineer for System Integration Test activities.

RESPONSIBILITIES WILL INCLUDE
1. System Integration and Test of new cockpit with legacy components on a Blackhawk platform.
2. Develop engineering test procedures in a DOORs environment and generate reports for test activates.
3. Primary technical responsibilities will be development of detailed test plans and reports of avionics systems including controls and displays, communication systems, navigation systems, and mission avionics systems for S-70i aircraft.

EXPERIENCE/QUALIFICATIONS
• BS in Aeronautical, Electrical Engineering with 6 to 10 years’ Avionics experience.
• Should be familiar with Avionic 1553 bus architecture and test equipment and troubleshooting of system level problems.
• Knowledge of Mil Standards, Digital Busses architecture (ARINC, 1553)
• Previous experience with of Avionics and Electrical Ground Flight Test Activities a plus.
• Working expertise in the design, analysis, development and operation of aircraft systems and avionics sub-systems.
• Knowledge of Test Methods and Lab Procedures

SKILLS REQUIRED
• Strong verbal and written communication skills essential.
• Strong Computer skills: Word, Excel, PowerPoint, Visio, DOORS
• Must be effective working in highly collaborative team environment to accomplish program objectives.
 
Job Number: 17-764-1564
Job Location: Northeast
Rate: OPEN
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 01/29/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
TH-AVIONICS-Grade 07

Description:
Seeking a candidate for a Commercial Avionics Systems Engineer to be an integral part of a small and fast-paced team supporting the engineering projects, product development, and test.
Researches, develops, designs, and tests electrical components, equipment, systems, and networks. Designs electrical equipment, facilities, components, products, and systems for commercial, industrial, and domestic purposes.
Airframes may include, but are not limited to S-76, S-92 and their derivatives, including integration of new technologies into the S-92.

PRIMARY RESPONSIBILITIES
1. Development of requirements
2. System Integration
3. Generation of lab and aircraft test procedures
4. Troubleshooting avionics issues on test, production and fielded aircraft
5. Support program management reviews

BENEFICIAL EXPERIENCE
- FAA and foreign certification (preferred)
- DO-178B, DO-160 and DO-254 processes (preferred)
- Technical project management (preferred)
- Supplier technical management (preferred)
- Pilot or A&P experience (preferred)

EDUCATIONAL REQUIREMENTS
- BS Engineering in a related field w/7+ years relevant professional experience
- Will consider non-degreed candidates who have equivalent professional experience (11+ years)
 
Job Number: 17-703-1551
Job Location: Northeast
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 01/29/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technical Designer II & III (Wire Harness Design & Installation) - (PA)

Description:
Maintains releases and assists in developing electrical/mechanical drawings, systems designs or engineering documentation and data, by applying Company, industry and governmental standards. Using design tools, prepares documentation and incorporates basic design changes. Creates, develops and maintains elementary systems designs. Supports engineering system design and functionality validation activities. Supports the development and maintenance of moderately-complex product installation designs and part designs. Supports coordination with internal partners and external suppliers. Works under general supervision. ....Additionally Candidates must have recent experience (within the last year) in designing, developing, maintaining and releasing wire harness drawings and/or 3D Model based definition data packages using CATIA V5, the electrical workbench, BoGart and/or Teamcenter.

AA degree in related discipline.
 
Job Number: EEDesignPA
Job Location: Ridley Park, PA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 5+ Months
Start Date: ASAP
Input Date: 12/11/2017
Last Updated: 01/05/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technical Designer III - Wire Harness Design & Installation - (PA)

Description:
Develops, maintains and releases electrical/mechanical drawings, systems designs or engineering documentation and data by applying company, industry and governmental standards. Using design tools prepares documentation and incorporates design changes. Creates, develops and maintains systems designs by preparing design layouts, modifying existing designs and assisting in identifying design discrepancies. Supports engineering system design and functionality validation activities. Develops and maintains product installation designs and part designs ranging from simple to moderately complex. Coordinates activities and products with internal partners and external suppliers. Works under general direction. ...Additionally Candidates must have recent experience (within the last year) in designing, developing, maintaining and releasing wire harness drawings and/or 3D Model based definition data packages using CATIA V5, the electrical workbench, BoGart and/or Teamcenter.

AA degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience. ...Additionally AA degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience.

ACS Group (formerly 'Comforce')
 
Job Number: EEDesignPA
Job Location: Ridley Park, PA
Rate: up to $35/hour, DOE
Per Diem: YES
Overtime: Possible
Duration: 5+ Months
Start Date: ASAP
Input Date: 12/18/2017
Last Updated: 01/26/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technical Designer V - Wire Harness Design & Installation - (WA)

Description:
Active Secret Clearance, NOT REQUIRED to Start.

Serves as the subject matter expert for the development, maintenance and release of electrical/mechanical drawings, systems designs or engineering documentation and data by applying Company, industry and governmental standards for multiple customers. Proposes innovative solutions for emergent technical issues. Uses design tools to document and maintain configuration control of designs. Manages, creates, develops and maintains highly complex or specialized systems designs by preparing design layouts, modifying existing designs and integrating systems elements. Directs validation of complex engineering system design and functionality. Leads the process for product installation designs and part designs ranging from simple to complex. Coordinates activities and products with cross-functional groups, internal partners and external suppliers. Reviews and assigns work to others. CATIA V5

AA degree in related discipline and typically 9 or more years of related experience or an equivalent combination of education and experience.

ACS Group (formerly 'Comforce')
 
Job Number: EEDesignWA
Job Location: Tukwila, WA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 12+ Months
Start Date: ASAP
Input Date: 01/10/2018
Last Updated: 01/26/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

Vehicle Electrical Engineers

Description:
CAN bus experience
 
Job Location: MI/OH/IN/TN
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: jmac@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Wire Design & Install Engineer 3

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Wire Design & Install Engineer 3
(U.S. Citizenship Required*)
Tukwila, WA
2017-5117

Responsibilities:
• Develop and maintain cable/wire harness detail and assembly designs.
• Analyze results and performs design reviews.
• Develop and maintain electrical product detail, assembly and installation designs (e.g., equipment racks, power panels, cable routing and geometry, antennas).
• Provide engineering design disposition on discrepancies (e.g., rejection tags, production action requests, shop revision requests).
• Document processes, specifications and procedures that support the design and manufacture of electrical commodities.
• Develop basic statements of work.
• Participate in technical review of supplier capabilities to facilitate source selection.
• Analyze functional and physical input to assure development of complete integrated design.

Qualification:
• Able to obtain Secret Clearance.

*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!


TO APPLY, PLEASE VISIT OUR WEBSITE: https://careers-moseleytechnical.icims.com/jobs/5117/wire-design-%26-install-engr-3/job?mode=view
 
Job Number: 2017-5117
Job Location: Tukwila, WA
Duration: 12 Months
Input Date: 12/18/2017
Last Updated: 12/29/2017
Firm Name: MOSELEY TECHNICAL SERVICES INC
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Wire Design & Install Engr 2

Description:
Wire Design & Install Engr 2

Location: Ridley Park, PA
Duration: 6+ months

NOTES:
Candidates must have recent experience (within the last year) in designing, developing, maintaining and releasing wire harness drawings and/or 3D Model based definition data packages using CATIA V5, the electrical workbench, BoGart and Teamcenter. Candidates must clearly document their CATIA V5 experience on their resumes.


Job Description:
Develops and maintains cable/wire harness detail and assembly designs. Supports analysis and design reviews. Develops and maintains electrical product detail, assembly and installation designs (e.g., equipment racks, power panels, cable routing and geometry, antennas).Provides engineering design disposition on discrepancies (e.g., rejection tags, production action requests, shop revision requests). Follows documented processes, specifications and procedures that support the design and manufacture of electrical commodities. Supports the development of statements of work. Assists in the technical review of supplier capabilities to facilitate source selection. Analyzes functional and physical input used in the development of integrated design and system architecture. Works under general supervision. Additionally. Candidates must have recent experience (within the last year) in designing, developing, maintaining and releasing wire harness drawings and/or 3D Model based definition data packages using CATIA V5, the electrical workbench, BoGart and Teamcenter. Candidates must clearly document their CATIA V5 experience on their resumes.

Education / Experience:
Bachelor's degree and typically 2 or more years' experience in an engineering classification or a Master's degree with experience in an engineering classification. Required: Bachelor or Master degree from an accredited course of study, in engineering, com. Additionally...This is a mandatory requirement. Candidates must have a four year Bachelor of Science degree in an Engineering discipline from an ABET accredited school. Candidates with Electrical Engineering Technology or AA degrees are not qualified.

Category Name Required Level
Technical Skills CATIA V5 Yes Intermediate

Education/Experience:
This is a mandatory requirement. Candidates must have a four year Bachelor of Science degree in an Engineering discipline from an ABET accredited school. Candidates with Electrical Engineering Technology or AA degrees are not qualified.
The following skills are required for this assignment. The level is intermediate CATIA V5. Aerospace experience is desired, but not required. Candidates with Automotive wire harness routing / MBD experience will be considered. Prior experience with Wire Harness Installation design in the aerospace field is preferred.
 
Job Location: Ridley Park, PA
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 months
Start Date: Asap
Input Date: 12/08/2017
Last Updated: 01/09/2018
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Wire Design & Installation Engineer II & III - (PA)

Description:
Develops and maintains cable/wire harness detail and assembly designs. Supports analysis and design reviews. Develops and maintains electrical product detail, assembly and installation designs (e.g., equipment racks, power panels, cable routing and geometry, antennas).Provides engineering design disposition on discrepancies (e.g., rejection tags, production action requests, shop revision requests). Follows documented processes, specifications and procedures that support the design and manufacture of electrical commodities. Supports the development of statements of work. Assists in the technical review of supplier capabilities to facilitate source selection. Analyzes functional and physical input used in the development of integrated design and system architecture. Works under general supervision. Additionally...Candidates must have recent experience (within the last year) in designing, developing, maintaining and releasing wire harness drawings and/or 3D Model based definition data packages using CATIA V5, the electrical workbench, BoGart and Teamcenter. Must clearly document CATIA V5 experience on resume.

Bachelor's degree and typically 2 or more years' experience in an engineering classification or a Master's degree with experience in an engineering classification. Required: Bachelor or Master degree from an accredited course of study, in engineering, com. Additionally...This is a mandatory requirement. Candidates must have a four year Bachelor of Science degree in an Engineering discipline from an ABET accredited school.
 
Job Number: EEpa
Job Location: Ridley Park, PA
Rate: Up to $48/hour, DOE
Per Diem: YES
Overtime: Possible
Duration: 5+ Months
Start Date: 01/2018
Input Date: 12/11/2017
Last Updated: 01/26/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Wire Harness Design & Installation Engineer III (WA)

Description:
Active Secret Clearance, NOT REQUIRED to Start.

Develops and maintains cable/wire harness detail and assembly designs. Analyzes results and performs design reviews. Develops and maintains electrical product detail, assembly and installation designs (e.g., equipment racks, power panels, cable routing and geometry, antennas).Provides engineering design disposition on discrepancies (e.g., rejection tags, production action requests, shop revision requests). Documents processes, specifications and procedures that support the design and manufacture of electrical commodities. Develops basic statements of work. Participates in technical review of supplier capabilities to facilitate source selection. Analyzes functional and physical input to assure development of complete integrated design. CATIA V5

Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.

ACS Group (formerly 'Comforce')
 
Job Number: EEtukwila
Job Location: Tukwila, WA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 12+ Months
Start Date: ASAP
Input Date: 01/10/2018
Last Updated: 01/12/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Wire Harness Installation Engineer

Description:
Wire Design & Install Engineer

Location: Tukwila, WA
Duration: 12 Months

Job Description:
Develops and maintains cable/wire harness detail and assembly designs. Analyzes results and performs design reviews. Develops and maintains electrical product detail, assembly and installation designs (e.g., equipment racks, power panels, cable routing and geometry, antennas). Provides engineering design disposition on discrepancies (e.g., rejection tags, production action requests, shop revision requests). Documents processes, specifications and procedures that support the design and manufacture of electrical commodities. Develops basic statements of work. Participates in technical review of supplier capabilities to facilitate source selection. Analyzes functional and physical input to assure development of complete integrated design. Works under general direction.

Skill Code:
679-Electrical/Electronic Installa

Education / Experience:
Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification
 
Job Number: 17-21027
Job Location: Tukwila, WA
Per Diem: Yes
Duration: 12 Months
Input Date: 12/21/2017
Firm Name: ICONMA LLC
Attention: Robin
Address: 1201 PACIFIC AVE STE 600
City, State: TACOMA, WA 98402
Phone: 253/213-2012
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
YL - COMPONENT INSTALLATION - Grade 07

Description:
COMPONENT INSTALLATION DESIGNER
The preferred candidate will possess a four year degree in an engineering discipline, either Mechanical or Electrical, 2000 hours CATIA design experience as well as 3 to 4 years’ experience in a design/manufacturing environment. The designer will work with a variety of engineering disciplines in a cooperative, Product Development Team format. Excellent written, oral and presentation skills as well as personal computer literacy using Microsoft Office products will be required. A working knowledge of MIL-W-5088 or AS50881 is desired.
Assignments in the Component Installation Section require the knowledge of Electrical/Mechanical drafting practices, geometric tolerancing, engineering mathematics, manufacturing practices as well as the ability to interpret equipment specifications and electrical schematics. Candidates will be responsible for the design and preparation of detail, assembly and installation drawings as required to define aircraft component and harness installations.
The candidate will tackle challenging assignments and develop unique solutions to rotorcraft Component Installation Design. Areas of design responsibility include electrical power system components, instrument panel and crew station design, antennas, lighting, airspeed systems, molded wiring assemblies and wire harness assemblies/installations.
LCA experience preferred.
 
Job Number: 17-762-1536
Job Location: Northeast
Rate: OPEN
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 01/29/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

Back to Advanced Job Search