Job Search Results

570 listings were found that matched your search words: Keywords: Electrical ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2018/02/23 Friday 08:33AM Pacific Time by ContractJobHunter. )

Listings 1 - 570

Go To My Job Tracker

Expand all descriptions

1st Shift

Description:
Perform maintenance in support of manufacturing facility on a variety of equipment throughout facility including machinery repairs, preventative maintenance, machine relocation, fabrication, welding, electrical repair and installation, plumbing (air, hydraulic, water) with use of a variety of equipment.  Responsible for monitoring hazardous waste for removal, maintenance of chemical storage area and clean up of chemical spills as required.  Nontoxic or non-hazardous.  Mainly Soap and/or grease
Will be operating a crane or fork lift.
 
Responsibilities:
Provide maintenance support in all areas of manufacturing facility including but not limited to machinery repairs, preventative maintenance, machine relocation, fabrication, welding, electrical repair and installation, plumbing (air, hydraulic, water) with use of a variety of equipment such as hand tools, welding equipment, fork lifts, and precision measuring equipment.  Maintain and develop preventative maintenance program for production related equipment.  Required to perform work in compliance to all safety and EHS policies and procedures. 
 
Qualifications:
  • Knowledge of EHS procedures and policies
  • Knowledge and safe use of production related equipment
  • Working knowledge and use of welding, electrical, and plumbing equipment including repair and maintenance of machinery
  • Millwright Skills and familiar with Electrical and/or Hydraulic
  • Able to interpret OEM handbooks and/or plant diagrams
  • Understanding of reading building plans and electrical schematics
  • Ability to use trouble-shooting and precision measuring equipment
  • Where applicable, trained in maintenance processes such as but not limited to welding, plumbing, electrical and mechanical troubleshooting
  • Vocational or technical training in a maintenance related discipline, strongly preferred

 
Training requirements:

  • Demonstrated ability to comply to maintenance safety procedures such as lock-out tags, etc.
  • Demonstrate ability to safely complete job tasks utilizing manual equipment as well as use of gauges needed for repair fabrication
  • Demonstrate ability to perform preventative maintenance, and repair of facilities equipment
  • Where applicable, complete safety and maintenance training and or certification

 
 
 
 
 

 
Job Number: 1610061453
Job Location: Las Vegas, NV
Duration: 12 months
Input Date: 02/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Eric Khassanov
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002G2BqAAK&URLSource=cjhunter

2228 - AVIONICS SYSTEMS INTEGRATOR - resume - word doc only

Description:
Responsible, as an Avionics Systems Integrator Specialist, to perform various tasks related to the development, qualification, certification and in-service support of Avionics systems on Challenger aircrafts.

Responsible for supporting investigation for in service and manufacturing issues and performing root cause analysis of Avionics systems.

Participate and define Avionics Systems architecture design to meet Aircraft Design Requirements and Objectives.

Support the Flight Test Center in development and certification tests; witnessing of tests may be required.

Support the Final Assembly Line and In Service Aircraft for any development issues.

Manage, review and approve the deliverables of the Avionics System Suppliers.

Work with other functions & disciplines of the Challenger program to provide required information and also to collect required data to allow the Avionics design, development & certification effort to progress.

Support other departments such as Production, Customer Support, Program Office and Product Planning.

Participate in meetings and design reviews with Avionics System Suppliers and certification authorities.

Be able to travel is a must.


University degree in Electrical, Electronics, Software, Aerospace Engineering or equivalent.

Must have at least eight (8) years of relevant experience with the design, development, integration and certification of Avionics systems.

Have a good knowledge with the specification, design, integration, test and certification of Avionics systems on aircraft.

Good knowledge of RTCA documents DO-178 and DO-160.

Good knowledge of part FAR25/525 certification process and with the ARP4754 standard.

Experience with civil aircraft and airworthiness authorities.

Systems: Datalink, Flight Management System and Display integration.

Proficient with the use of Microsoft Office software tools to produce presentation and reports.

Ability to work well in a team environment.

Strong communication skills (written and spoken).
 
Job Number: 2228
Job Location: Montreal, Canada
Rate: 64.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 02/21/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Email: tdm@tdm.ca
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2231 - ELECTRICAL HARNESS DESIGNER - resume - word doc only

Description:
Produce and deliver Harness Data Reports based on Digital Mock-up and Mentor Graphics.

Integrate the design of the wire harnesses.

Incorporate changes (RFC, PCR) on the harness data reports.

Contribute to the team effort by meeting the team%u2019s objectives for productivity and quality.

Contribute to other relevant tasks needed to support the team%u2019s objectives.

Have a University degree in aircraft avionics or electrical engineering or equivalent work experience in wiring integration.

Have experience with harness manufacturing or methods.

Have a minimum of 5 years of relevant working experience in aerospace.

Have wiring design, wiring installation and/or wiring troubleshooting experience.

Mentor Graphics Harness XC tool knowledge is the primary requirement.

Also have experience with Catia V5.

Have a strong sense of responsibility and have good organization skills.

Must have excellent communication skills including the ability to read/write in English.

Are comfortable working with MS office suite.

Are familiar with BM%u2019s, RAE documents and BAPS related to harnesses.

Communicate clearly and openly with your team.

Embrace changes and new ideas.

Are persistent to reach your goals.

Seek out and accept feedback.
 
Job Number: 2231
Job Location: Montreal, Canada
Rate: 61.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 01/26/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

2304 - AVIONICS SYSTEMS ENGINEER - cv. word doc only

Description:
Support of Compliance to Certification Authority; author Certification Plans

Provide specialist advice relating to test methods and procedures

Review testing readiness and conformities of assigned systems

Review qualification, ground and flight test data of assigned systems

Review flight test reports containing data demonstrating proper system operation as required by Certification Authorities Regulations

Review and Sign flight release documentation (including safety of flight judgments)

Review system performance analysis to ensure proper compliance to regulations

Coordinate with other Certification Authority Delegates for integrated functions (ie, Human Factor, Pilots, et al)

May provide technical leadership to a small engineering team for dedicated technical investigation / test.

Bachelor's degree in Avionics / Electrical/ Aerospace Engineering, plus 12-15 years' experience in Avionics systems design and certification.

Able to obtain a Certification Authority Delegation for assigned systems

Working knowledge of Rockwell Collins Proline 21 or Fusion Avionics Systems would be advantageous.

Must have excellent communication skills in English - both written and oral and be PC literate.

Experience in flight-testing of civil aircraft; and knowledge of TCCA, FAA, and EASA certification requirements (ie, FAA CFR Part 25) required.

Mirabel is just outside Montreal, Canada.
 
Job Number: 2304
Job Location: Montreal/Mirabel, Canada
Rate: $63.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 02/21/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Email: tdm@tdm.ca
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2311 - LIAISON ENGINEER - MRB - cv, word doc only

Description:
Disposition documentation to resolve fit, form or functional issues on A/C components.

Support to Production, Design Engineering, Procurement & Quality in coordinating resolutions to issues.

Review & trouble shooting of Aircraft Systems in conjunction with Design Engineering as required.

Review & disposition of Aircraft Wiring & Electrical issues in conjunction with Design Engineering as required.

Corrective Action requests involving Engineering as required.

Obtain & Interface with Design Engineering experts on appropriate issue resolution.

Interpret engineering drawings, specs & provide guidance to junior employees.

Provide status, updates & keep current on information regarding manufacturing changes & problems.

Have formal education to degree level in mechanical/aerospace engineering or related field.

Have minimum of ten years MRB experience or design experience in Aerospace.

Have good knowledge of aircraft structure & system installation technical requirements, aircraft materials and hardware, standards and specifications, and Electrical & Systems experience would be considered an asset.

Have excellent communication and interpersonal skills, a high sense of commitment, and a willingness to accept responsibilities while acting independently in a high-pressure partner/supplier team environment.

Have previous CATIA, Design and MRB experience including support to production would be considered an asset.

Have previous experience as a Mentor and Coach in either Liaison team environment or working with problem solving teams is an asset.
 
Job Number: 2311
Job Location: Toronto, Canada
Rate: 60.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 02/09/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

2nd Shift Maintenance Technician

Description:
Description:
Perform maintenance in support of manufacturing facility on a variety of equipment throughout facility including machinery repairs, preventative maintenance, machine relocation, fabrication, welding, electrical repair and installation, plumbing (air, hydraulic, water) with use of a variety of equipment.  Responsible for monitoring hazardous waste for removal, maintenance of chemical storage area and clean up of chemical spills as required.  Nontoxic or non-hazardous.  Mainly Soap and/or grease
Will be operating a crane or fork lift.
 
Responsibilities:
Provide maintenance support in all areas of manufacturing facility including but not limited to machinery repairs, preventative maintenance, machine relocation, fabrication, welding, electrical repair and installation, plumbing (air, hydraulic, water) with use of a variety of equipment such as hand tools, welding equipment, fork lifts, and precision measuring equipment.  Maintain and develop preventative maintenance program for production related equipment.  Required to perform work in compliance to all safety and EHS policies and procedures. 
 
Qualifications:
  • Knowledge of EHS procedures and policies
  • Knowledge and safe use of production related equipment
  • Working knowledge and use of welding, electrical, and plumbing equipment including repair and maintenance of machinery
  • Millwright Skills and familiar with Electrical and/or Hydraulic
  • Able to interpret OEM handbooks and/or plant diagrams
  • Understanding of reading building plans and electrical schematics
  • Ability to use trouble-shooting and precision measuring equipment
  • Where applicable, trained in maintenance processes such as but not limited to welding, plumbing, electrical and mechanical troubleshooting
  • Vocational or technical training in a maintenance related discipline, strongly preferred

 
Training requirements:

  • Demonstrated ability to comply to maintenance safety procedures such as lock-out tags, etc.
  • Demonstrate ability to safely complete job tasks utilizing manual equipment as well as use of gauges needed for repair fabrication
  • Demonstrate ability to perform preventative maintenance, and repair of facilities equipment
  • Where applicable, complete safety and maintenance training and or certification

For consideration to this position, please contact Eric Khassanov at ekhassanov@pdstech.com or 843-277-6611.
 
 


 
Job Number: 1610057656
Job Location: KS City, MO
Duration: 12 months
Input Date: 02/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Eric Khassanov
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002FgpWAAS&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Advanced Engineering Technician 1

Description:
A Fortune 500 and worldwide leader in business aviation; specializing in Command and Control, Communications Networking, Rugged Computing, Information Assurance and Cyber Defense is searching for the right talent to fill this opportunity:

Advanced Engineering Technician 1
(U.S. Citizenship Required*)
Scottsdale, AZ
2017-5119

Responsibilities:
• Support engineering activities such as design, test, check-out, modification, fabrication and assembly of prototype electro-mechanical systems, experimental design circuitry, laser/light transmission devices or specialized test equipment
• Frequently contact individuals representing other departments or outside organizations
• Perform a variety of equipment/process operations involving an application or technical skills in a specific area (electrical, software, manufacturing, etc.)
• Interpret basic engineering drawings, diagrams and schematics
• Construct, modify, debug, troubleshoot, calibrate, test, and adjust a variety of tools, equipment and systems
• Conduct, analyze, and document statistically based experiments to define process parameters
• Organize, analyze, and interpret data to identify cause/effect relationships and recommends resolution/process improvement
• Implement and document complex solutions for process improvement
• Design and construct basic tooling and fixtures to accomplish unique tasks
• Perform complex troubleshooting to the component level
• Work with Engineering and Operations Support
• Work from schematics, diagrams, written and verbal descriptions, layouts or defined plans to perform testing, checkout and trouble-shooting functions
• Handle unexpected demands and adapt to new situations
• Perform operational test and fault isolation on systems and equipment
• Assist determining methods or actions to remedy malfunctions
• Assist design, construction, test and check-out of test equipment
• Use manufacturing, test, development, or diagnostic equipment, including test programs, oscilloscopes, signal generators, and specialized test apparatus
• Analyze results and implement procedures for problems
• May develop test specifications and procedures
• May prepare reports, documentation/specifications as required

Qualifications:
• Required – Top Secret security clearance
• Considerable knowledge and proficiency in the use of fabrication tools
• Able to fabricate complex hardware
• Able to use computers and software applications to assist in job execution
• Influential with others; demonstrates superior communication and collaborative skills

*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Associate’s degree in related discipline or equivalent is required plus a minimum of 3 years of relevant experience.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!

TO APPLY PLEASE VISIT OUR WEBSITE: https://careers-moseleytechnical.icims.com/jobs/5119/adv-engineering-tech-1/job?mode=view
 
Job Number: 2017-5119
Job Location: Scottsdale, AZ
Duration: 24 Months
Input Date: 12/29/2017
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Bob Jones
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer / no clearance / Flight Control and Vehicle Management System skills a requirement CA

Description:
Requirement #AERO-REQ-0710
Work Location Palmdale, CA (1011 Lockheed Way)
Work Week 9/80

Needed Date 11/28/2017
End Date 11/09/2018
Number of Resources 1
No Clearance

Flight Control and Vehicle Management System skills a requirement

Title: Aeronautical Engineer

Description

Candidate will contribute to aircraft FC&VMS (Flight Controls & Vehicle Management System) design, configuration development, feasibility and risk analyses, and technology maturation plans, define, develop, analyze and coordinate FC&VMS requirements with other flight sciences disciplines including ground and flight test, reliability & maintainability, system safety, and other personnel. Develop models and simulations as needed for design and analysis. Perform trade studies and define preliminary requirements for VMS architecture components. Design mechanical and electrical/electronic interfaces to support system integration and test. Define high level software requirements and flow down requirements to procurement specifications. Tasks may also include management of selected vendors, including verification of requirements. The candidate will support system/software verification and validation effort and customer reviews during all phases of system development. The candidate will develop and support integration and system check out (SCO) procedures on flight test article and support pre-flight and post-flight analysis and reviews

Skill/Experience/Education

Mandatory:

Hardware and software integration experience Familiarity with Flight Controls and Vehicle Management Systems Demonstrated ability coordinating with systems engineering, hardware designers and subsystems
Desired:

B.S. Degree or above in an Engineering Discipline
Several years of hardware & laboratory experience MATLAB, Simulink experience


Interview Required Yes
OT Allowed Yes (OT Limitation: No)
Travel No
Non-Exempt
Rate Type Per Hour

Rates
0-4 Yrs Pay Rate: 65.00 USD
5-8 Yrs Pay Rate: 70.00 USD
9+ Yrs Pay Rate: 75.00 USD
 
Job Number: JE-0710
Job Location: Palmdale, CA
Rate: 65-75/hr DOE
Duration: 12 month contract
Input Date: 02/06/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Design Engineer II

Description:
Essential Functions and Key Responsibilities:
Develops solutions to a variety of moderate complexity or unusual engineering or technical problems or assignments requiring judgment and ingenuity to work within engineering protocols in the analysis, design and/or repair development of aircraft structures, power plant component parts, mechanical and electrical systems/structures and subsystems for commercial, military, executive, general aviation, or special purpose applications on operational aircraft.

Analyzes and interprets engineering proposals and documentation such as drawings, material and product specifications, structural repair manuals (SRMs), component maintenance manuals (CMMs) and illustrated parts lists (IPLs/IPCs) to develop design and/or repair schemes approaches. Confers with management to clarify or resolve problems.

Designs and develops and/or repairs of structural, power plant and other operational and structural components that are used in operating aircraft. This includes producing or assisting in the production of computer aided drawings and engineering reports.

Develops design and/or repair data packages and obtains FAA approvals through internal and external FAA Designated Engineering Representatives (DERs); troubleshoot failure modes, communicate and interact with customer engineering groups and/or internal personnel for design, development and/or cost effective repair schemes and approvals.

Designs and develops analytical programs concerned with ground or flight testing, or development of acoustic, thermodynamic, or propulsion systems.

Tests models, prototypes, subassemblies, or production items to study and evaluate operational characteristics and effects of stress imposed during actual or simulated operational conditions.

Ancillary Functions and Responsibilities:

Performs other duties as required. These duties may include assignments in job classifications other than the primary assignment.


JOB QUALIFICATIONS:

Experience may be substituted for the formal education and training requirements in this section at the discretion of management. Technical Bachelor level degree in Engineering or the sciences or equivalent and three (3) to six (6) years related experience and/or training; or equivalent combination of education and experience.
CATIA and SAP experience preferred, knowledge of FAA/PMA and FAR's, GDT and blue print reading, advanced technical writing skills required.
 
Job Number: 13920
Job Location: Tulsa, OK
Rate: 35
Per Diem: possible
Overtime: possible
Duration: LT
Start Date: ASAP
Input Date: 12/28/2017
Firm Name: APA SERVICES
Attention: Lisa
Address: 4150 INTERNATIONAL PLZ STE 510
City, State: FORT WORTH, TX 76109
800 Phone: 888/272-7868
Fax Phone: 800/285-8805
Website: www.apaservices.net

Aircraft Electrician / Avionics - Secret

Description:
PDS Tech is seeking a Electrician/Avionics Mechanic  for an open position in Jacksonville, FL. 

Ability to efficiently read and interpret schematics, assembly drawings, process specifications, wiring diagrams, technical manuals, written instructions, etc. 

Ability to efficiently use a variety of manual hand tools such as crimpers, strippers, wire cutters, heat shrink gun, etc.

Ability to efficiently assemble, modify, install and perform continuity tests on wire bundles, conductors and other quality electrical components.

Ability to apply knowledge of shop mathematics and electrical and electronic theories to aircraft repairs and troubleshooting of systems and subsystems.

Ability to clearly document maintenance and repair actions, equipment status tags, logs, parts requests, etc.

Ability to operate ground support equipment (GSE) and test equipment as required to perform assigned tasks.
High School Diploma or GED
 
Job Number: 1710079287
Job Location: Jacksonville, FL
Duration: 12 months
Input Date: 02/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Enrique Perez
Address: 3201 CHERRY RIDGE DR STE A103
City, State: SAN ANTONIO, TX 78230-4824
Phone: 210/524-1496
800 Phone: 866/570-1503
Email: cecjsanantonio@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023bFOAAY&URLSource=cjhunter

Aircraft Technicians - WA State

Description:
Major Manufacturing Program needs Aircraft Technicians for direct hire long term positions.
Opportunity to work direct for the premier commercial aircraft manufacturing company in the US.

Avionic / Electrical Test Technician

Mechanics in this position test all mechanical and electrical systems on aircraft, making all required changes and repairs prior to flight test. Mechanics will be working on a live aircraft.
  • Set up and perform bench test or automatic test per work order, test document, test equipment manuals and/or engineering instructions.
  • Perform tests using various computer systems, oscilloscopes, power supplies and meters.
  • Troubleshoot faults in electronic circuits and mechanical systems using various types of test equipment (e.g., Special Test Equipment "STE", Automated Test Equipment "ATE" and shop aids) and adjust or repair as needed.
  • Assist and support aircraft technicians in sequencing of work operation, troubleshooting and problem analysis/resolution.
  • Obtain and use appropriate engineering drawings, test documents, and any other necessary paperwork or on-line systems.
  • Order parts and components required to complete assigned task.
  • Check test equipment prior to use to ensure proper operation and certification requirements are met, utilizing test equipment manuals, check sheets and self test procedures.
  • Energize various systems to perform a variety of functional tests per drawing, test documents, nonconformance reports and other documents in order to verify integrity of the systems.
  • Use, assemble and maintain new and existing shop aids for testing and troubleshooting airframe and power plant systems and subsystems.
  • Select proper hand, power and/or bench tools needed to perform required operation (e.g., screwdrivers, pliers, torque wrenches, crimpers, cable tools, band saw, drill press and circular sander).
  • Operate mechanical lifts of various types to locate parts/assemblies into position or to perform assembly work.
  • Locate tools and/or parts on airplane using tooling holes, pilot holes, K holes, or by hand (as required), per drawing, IP, or tooling instructions.
  • Align parts and secure in place using Clecos or tooling/hand clamps.
  • Check for good edge margins and alignment and shim parts, as required.
  • Handle and protect components and assemblies in accordance with shop procedures and drawing requirements.
  • Set up assembly tools per tooling instructions or drawing.
  • Select drill bits, reamers and/or countersinking tools for pilot and full size holes per drawing.
  • Drill, ream, countersink full size holes in parts/ assemblies, in proper sequence and to correct size, per drawing using drill motor.
  • Set countersinking tools to proper depth, as required.
  • Disassemble parts and deburr holes using chip chasers, deburring tools and files to prepare for installation of fasteners.
  • Use solvents to clean surfaces prior to sealing or assembly.
  • Apply sealant, alodine, primer, adhesives and special finishes.
  • Determine and obtain correct type and size fasteners.
  • Install fasteners in correct sequence per drawing, using correct tools (e.g., rivet gun and bucking bar, drill motor, power screwdriver, C-squeeze, ratchet wrench, nut runner).
  • Handle and dispose of hazardous materials in approved manner.

Qualifications:

  • Aircraft Technicians need a strong working knowledge of all aircraft systems and various types of test equipment.
  • High school graduate or GED preferred.
  • Experience troubleshooting and fixing problems with various types of electronics equipment
  • Experience reading and interpret production illustrations, wiring diagrams, and/or schematics
  • Experience using a computer such as internet navigation, email, Microsoft Office and/or other specialized computer applications
  • Positions open to all US Persons.  "US Person" includes US Citizen, lawful permanent resident, refugee, or asylee.


Fuel Cell Assembly Mechanic
Mechanics in this position perform various procedures to accomplish fuselage and wing joining. Work is performed on composite / metal aircraft with occasional sealing.

  • Assemble and install parts, structural components and sub-assemblies to build and attach major wing assemblies.
  • Assemble, install, connect and rework plumbing and electrical components and systems.
  • Perform continuity checks on wire bundles and electrical components.
  • Locate work area using drawings which specifies airplane number, section number, and three-point location.
  • Set up assembly tools per tooling instructions or drawing.
  • Locate tools and/or parts on airplane using tooling holes, pilot holes, K holes, or by hand, per drawing or tooling instructions.
  • Align parts and secure in place using Clecos or tooling/hand clamps.
  • Check for good edge margins and alignment.
  • Shim and/or trim parts as required.
  • Drill pilot holes using drill motor and proper size drill bit(s).
  • Drill, ream, countersink full size holes in parts/assemblies, in proper sequence and to correct size using drill motor.
  • Disassemble parts and deburr holes using chip chasers, deburring tools, and files to prepare for installation of fasteners.
  • Use solvents to clean surfaces prior to sealing or assembly.
  • Apply sealant, alodine, primer, adhesives and special finishes.
  • Handle and dispose of hazardous materials in approved manner.
  • Install fasteners by correct type, size and in correct sequence per drawing, using correct tools (e.g., rivet gun and bucking bar, drill motor, power screwdriver, C-squeeze, ratchet wrench, nut runner).
  • Obtain two way radio and confined space flag, adhering to Communications System for Confined Hazardous Areas rules, per company procedures.
  • Operate mechanical lifts of various types to locate parts/assemblies into position or to perform assembly work.
  • Prepare, assemble and install tubing, standoffs, valves, regulators, compressors and ducts, using fasteners per drawing.
  • Install pre-assembled plumbing systems (e.g., hydraulic modules; smoke detectors, fire extinguishers, air, water and fuel systems), using ground straps and wires, clamps, lubricant and hand/power tools (e.g., screwdrivers, torque wrenches, nut runners).
  • Install wire bundles and electrical components using production illustrations and wiring diagrams.

Exposure to aluminum, titanium, steel, magnesium, exotic alloys, plastics, composites and hazardous materials. This position will require working in confined spaces of the wing fuel cells for extended periods. Employees crawl through an opening 17.75" X 10.00" in order to get inside the fuel cell. Employment in this position also requires, standing, reaching, turning, twisting, stooping, kneeling, crouching, squatting, crawling, pushing/pulling, working with sealants, paints and other hazardous materials and the use of personal safety gear for face, eyes, hand and ears.
 
Qualifications:
  • Position will require working in confined spaces of the wing fuel cells and crawling through an opening 17.75" X 10.00".
  • High school graduate or GED preferred.
  • Positions open to all US Persons.  “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee.

Please Apply and select which position you are interested in on the application.

Thank you, The PDS Tech Recruiting Team   

 
Job Number: 1710078849
Job Location: Everett, WA
Duration: 24 months
Input Date: 02/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Janet Rauseo
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023VZSAA2&URLSource=cjhunter

Aircraft Technicians - WA State

Description:
Major Manufacturing Program needs Aircraft Technicians for direct hire long term positions.
Opportunity to work direct for the premier commercial aircraft manufacturing company in the US.

Call 866-224-2745 Select Option 1
Email DirectHire@pdstech.com

Avionic / Electrical Test Technician

Mechanics in this position test all mechanical and electrical systems on aircraft, making all required changes and repairs prior to flight test. Mechanics will be working on a live aircraft.
  • Set up and perform bench test or automatic test per work order, test document, test equipment manuals and/or engineering instructions.
  • Perform tests using various computer systems, oscilloscopes, power supplies and meters.
  • Troubleshoot faults in electronic circuits and mechanical systems using various types of test equipment (e.g., Special Test Equipment "STE", Automated Test Equipment "ATE" and shop aids) and adjust or repair as needed.
  • Assist and support aircraft technicians in sequencing of work operation, troubleshooting and problem analysis/resolution.
  • Obtain and use appropriate engineering drawings, test documents, and any other necessary paperwork or on-line systems.
  • Order parts and components required to complete assigned task.
  • Check test equipment prior to use to ensure proper operation and certification requirements are met, utilizing test equipment manuals, check sheets and self test procedures.
  • Energize various systems to perform a variety of functional tests per drawing, test documents, nonconformance reports and other documents in order to verify integrity of the systems.
  • Use, assemble and maintain new and existing shop aids for testing and troubleshooting airframe and power plant systems and subsystems.
  • Select proper hand, power and/or bench tools needed to perform required operation (e.g., screwdrivers, pliers, torque wrenches, crimpers, cable tools, band saw, drill press and circular sander).
  • Operate mechanical lifts of various types to locate parts/assemblies into position or to perform assembly work.
  • Locate tools and/or parts on airplane using tooling holes, pilot holes, K holes, or by hand (as required), per drawing, IP, or tooling instructions.
  • Align parts and secure in place using Clecos or tooling/hand clamps.
  • Check for good edge margins and alignment and shim parts, as required.
  • Handle and protect components and assemblies in accordance with shop procedures and drawing requirements.
  • Set up assembly tools per tooling instructions or drawing.
  • Select drill bits, reamers and/or countersinking tools for pilot and full size holes per drawing.
  • Drill, ream, countersink full size holes in parts/ assemblies, in proper sequence and to correct size, per drawing using drill motor.
  • Set countersinking tools to proper depth, as required.
  • Disassemble parts and deburr holes using chip chasers, deburring tools and files to prepare for installation of fasteners.
  • Use solvents to clean surfaces prior to sealing or assembly.
  • Apply sealant, alodine, primer, adhesives and special finishes.
  • Determine and obtain correct type and size fasteners.
  • Install fasteners in correct sequence per drawing, using correct tools (e.g., rivet gun and bucking bar, drill motor, power screwdriver, C-squeeze, ratchet wrench, nut runner).
  • Handle and dispose of hazardous materials in approved manner.

Qualifications:

  • Aircraft Technicians need a strong working knowledge of all aircraft systems and various types of test equipment.
  • High school graduate or GED preferred.
  • Experience troubleshooting and fixing problems with various types of electronics equipment
  • Experience reading and interpret production illustrations, wiring diagrams, and/or schematics
  • Experience using a computer such as internet navigation, email, Microsoft Office and/or other specialized computer applications
  • Positions open to all US Persons.  "US Person" includes US Citizen, lawful permanent resident, refugee, or asylee.


Fuel Cell Assembly Mechanic
Mechanics in this position perform various procedures to accomplish fuselage and wing joining. Work is performed on composite / metal aircraft with occasional sealing.

  • Assemble and install parts, structural components and sub-assemblies to build and attach major wing assemblies.
  • Assemble, install, connect and rework plumbing and electrical components and systems.
  • Perform continuity checks on wire bundles and electrical components.
  • Locate work area using drawings which specifies airplane number, section number, and three-point location.
  • Set up assembly tools per tooling instructions or drawing.
  • Locate tools and/or parts on airplane using tooling holes, pilot holes, K holes, or by hand, per drawing or tooling instructions.
  • Align parts and secure in place using Clecos or tooling/hand clamps.
  • Check for good edge margins and alignment.
  • Shim and/or trim parts as required.
  • Drill pilot holes using drill motor and proper size drill bit(s).
  • Drill, ream, countersink full size holes in parts/assemblies, in proper sequence and to correct size using drill motor.
  • Disassemble parts and deburr holes using chip chasers, deburring tools, and files to prepare for installation of fasteners.
  • Use solvents to clean surfaces prior to sealing or assembly.
  • Apply sealant, alodine, primer, adhesives and special finishes.
  • Handle and dispose of hazardous materials in approved manner.
  • Install fasteners by correct type, size and in correct sequence per drawing, using correct tools (e.g., rivet gun and bucking bar, drill motor, power screwdriver, C-squeeze, ratchet wrench, nut runner).
  • Obtain two way radio and confined space flag, adhering to Communications System for Confined Hazardous Areas rules, per company procedures.
  • Operate mechanical lifts of various types to locate parts/assemblies into position or to perform assembly work.
  • Prepare, assemble and install tubing, standoffs, valves, regulators, compressors and ducts, using fasteners per drawing.
  • Install pre-assembled plumbing systems (e.g., hydraulic modules; smoke detectors, fire extinguishers, air, water and fuel systems), using ground straps and wires, clamps, lubricant and hand/power tools (e.g., screwdrivers, torque wrenches, nut runners).
  • Install wire bundles and electrical components using production illustrations and wiring diagrams.

Exposure to aluminum, titanium, steel, magnesium, exotic alloys, plastics, composites and hazardous materials. This position will require working in confined spaces of the wing fuel cells for extended periods. Employees crawl through an opening 17.75" X 10.00" in order to get inside the fuel cell. Employment in this position also requires, standing, reaching, turning, twisting, stooping, kneeling, crouching, squatting, crawling, pushing/pulling, working with sealants, paints and other hazardous materials and the use of personal safety gear for face, eyes, hand and ears.
 
Qualifications:
  • Position will require working in confined spaces of the wing fuel cells and crawling through an opening 17.75" X 10.00".
  • High school graduate or GED preferred.
  • Positions open to all US Persons.  “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee.

Please Apply and select which position you are interested in on the application.

Thank you, The PDS Tech Recruiting Team   

 
Job Number: 1710078720
Job Location: Everett, WA
Duration: 24 months
Input Date: 02/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Janet Rauseo
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023UUzAAM&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Applications Engineer Vice Installation

Description:
UNIQUE SKILLS
Candidate must have In depth knowledge of electrical harness installation and design guidance documentation (AC 43.13B, SAE AS50881, AC1701-1); In-depth knowledge of FAR 25 sub part H (EWIS) design requirements; Knowledge of EWIS component qualification requirements and documentation (EIA 364, MIL-DTL-38999, MIL-DTL-50151); Extensive knowledge of EWIS component selection criteria; experience with Mentor Graphics Capital Harness System (CHS) preferred Education/Experience: Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs. in the specific technical discipline or 10 yrs. broad engineering experience in several technical disciplines with Bachelors, or 3 yrs. in the specific technical discipline with Masters, or 1 yr. in the specific technical discipline with PhD. Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the production of Client products and services.

PRINCIPAL DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

ADDITIONAL FUNCTIONS
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

OTHER REQUIREMENTS
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 17-785-100301
Job Location: Southeast
Rate: $58.00 to $63.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 01/29/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

Assembler \'A\' (3) - FL

Description:
Chipton-Ross is seeking an Assembler 'A' (3) for an opening in St Petersburg, FL.

Under minimum supervision, performs a wide variety of electronic and electro-mechanical subassembly and assembly operations of a semi-skilled nature to build up and assemble difficult and complex units such as power supplies, modules, chassis drawers, cable harnesses, electronic systems and subassemblies. Determines methods and sequence of assembly operations where complete information is not readily available or follows assembly shop and production operation sheets, wire lists, samples, blue prints, schematic and verbal instructions to perform a wide variety of assembly operations such as wiring, component installation and hand soldering. Must be able to perform the essential duties and responsibilities with or without reasonable accommodation. The duties and responsibilities may change from time to time without notice and include but are not limited to the duties described below.

RESPONSIBILITIES:
Performs complex wiring, soldering and assembly of subassemblies and final assemblies.
Reads and interprets complex wiring diagrams, color codes, schematics and wire lists.
Builds harnesses of high complexity.
Terminates various multi-conductor and coaxial cables.
Utilizing a high degree of proficiency, wires and solders various components within circuits and chassis.
Performs mechanical assembly of high complexity chassis and cabinets.
Occasionally employs basic knowledge of electrical theory and its application to basic wiring and testing using voltage and ohmmeters.
Disassembles, modifies, reworks, refurbishes, reassembles and tests units as required.
Sets up and operates automatic and semiautomatic assembly equipment.
May be required to perform continuity checks and rework.
Complies with ISO procedures and regulations. Maintains a safe and clean work area. Complies with company policies and guidelines regarding inventory control and timekeeping.

REQUIRED EXPERIENCE:
Must be proficient with all hand tools, basic mechanical inspection equipment such as calipers and indicators and electrical test equipment such as multimeters.
Must be proficient in soldering techniques, color codes and component identification.
Must be able to perform assembly calculations with accuracy.
Must be ability to read blueprints and work with small parts.
Requires understanding of concept of Work Orders and Bills of Materials.
Must be able to follow verbal instructions or procedures.
Must have knowledge of computer usage specifically Microsoft Office applications.
Communication skills are required for effective interface with all contacts.

EDUCATION:
High School or technical trade school graduate preferred, or training in military service graduate.

ADDITIONAL EXPERIENCE:
Requires a minimum of five (5) years of progressively difficult related electro/mechanical assembly and wiring experience.

WORK HOURS:
9/80, Full-Time
 
Job Number: 165634
Job Location: St. Petersburg, FL
Rate: Up to $16.75 DOE
Duration: 5 Months
Input Date: 02/23/2018
Firm Name: CHIPTON ROSS
Attention: Christian Martinez-Salceda
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: cmartinez@chiptonross.com
Website: www.chiptonross.com

Aviation Mechanics - Clearance

Description:
Seeking Experienced Aviation Mechanics for a contract opportunity in San Antonio, Texas!

Work to be performed on a VIP aircraft, 747 platform and active Top Secret Clearance Required.
Several Openings For:
  • General Mechanic
  • Electrical
  • Structures
  • Avionics Tech
  • Quality Inspection
  • Supply Chain Specialist


Great Opportunity for Ex-military/Exiting Military/ and Veterans
Previous military experience a plus!


 
Experience performing routine maintenance, modifications, and rework on VIP - 747 aircraft.
Required- Minimum of 5 years' experience working on 747 platform.
Tools: no tools required
Location: San Antonio, Texas

***Current Security Top Secret Clearance required
US Citizenship Required: Clearance requirements will be used during resume screening. Individuals must hold a current Clearance or Equivalent Clearance/ investigation type to be considered for this position, clearance level must be noted on the resume. Must follow submittal procedures below for consideration. No phone calls please, only candidates that provide resumes with the job ID number will be contacted and considered for the opportunity.

**submittal must reference Job ID number 1710063637

Camille Zunker- czunker@pdstech.com
 
Job Number: 1710063637
Job Location: San Antonio, TX
Duration: 12 months
Input Date: 02/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Camille Zunker
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002GBZ0AAO&URLSource=cjhunter

Avionic / Electrical Test Technician

Description:
Avionic / Electrical Test Technicians needed for direct hire long term positions.  
Opportunity to work direct for the premier commercial aircraft manufacturing company in the US.

Mechanics in this position test all mechanical and electrical systems on aircraft, making all required changes and repairs prior to flight test. Mechanics will be working on a live aircraft.
  • Set up and perform bench test or automatic test per work order, test document, test equipment manuals and/or engineering instructions.
  • Perform tests using various computer systems, oscilloscopes, power supplies and meters.
  • Troubleshoot faults in electronic circuits and mechanical systems using various types of test equipment (e.g., Special Test Equipment "STE", Automated Test Equipment "ATE" and shop aids) and adjust or repair as needed.
  • Assist and support aircraft technicians in sequencing of work operation, troubleshooting and problem analysis/resolution.
  • Obtain and use appropriate engineering drawings, test documents, and any other necessary paperwork or on-line systems.
  • Order parts and components required to complete assigned task.
  • Check test equipment prior to use to ensure proper operation and certification requirements are met, utilizing test equipment manuals, check sheets and self test procedures.
  • Energize various systems to perform a variety of functional tests per drawing, test documents, nonconformance reports and other documents in order to verify integrity of the systems.
  • Use, assemble and maintain new and existing shop aids for testing and troubleshooting airframe and power plant systems and subsystems.
  • Select proper hand, power and/or bench tools needed to perform required operation (e.g., screwdrivers, pliers, torque wrenches, crimpers, cable tools, band saw, drill press and circular sander).
  • Operate mechanical lifts of various types to locate parts/assemblies into position or to perform assembly work.
  • Locate tools and/or parts on airplane using tooling holes, pilot holes, K holes, or by hand (as required), per drawing, IP, or tooling instructions.
  • Align parts and secure in place using Clecos or tooling/hand clamps.
  • Check for good edge margins and alignment and shim parts, as required.
  • Handle and protect components and assemblies in accordance with shop procedures and drawing requirements.
  • Set up assembly tools per tooling instructions or drawing.
  • Select drill bits, reamers and/or countersinking tools for pilot and full size holes per drawing.
  • Drill, ream, countersink full size holes in parts/ assemblies, in proper sequence and to correct size, per drawing using drill motor.
  • Set countersinking tools to proper depth, as required.
  • Disassemble parts and deburr holes using chip chasers, deburring tools and files to prepare for installation of fasteners.
  • Use solvents to clean surfaces prior to sealing or assembly.
  • Apply sealant, alodine, primer, adhesives and special finishes.
  • Determine and obtain correct type and size fasteners.
  • Install fasteners in correct sequence per drawing, using correct tools (e.g., rivet gun and bucking bar, drill motor, power screwdriver, C-squeeze, ratchet wrench, nut runner).
  • Handle and dispose of hazardous materials in approved manner.

  • Aircraft Technicians need a strong working knowledge of all aircraft systems and various types of test equipment.
  • High school graduate or GED preferred.
  • Experience troubleshooting and fixing problems with various types of electronics equipment
  • Experience reading and interpret production illustrations, wiring diagrams, and/or schematics
  • Experience using a computer such as internet navigation, email, Microsoft Office and/or other specialized computer applications
  • Positions open to all US Persons.  "US Person" includes US Citizen, lawful permanent resident, refugee, or asylee.

 
Job Number: 1710078605
Job Location: Everett, WA
Duration: 24 months
Input Date: 02/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Earl Sawyer
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023UFLAA2&URLSource=cjhunter

Avionics Electrical Engineers

Description:
Jets experience a plus
 
Job Location: Southeast
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: jmac@advancedtechno.com
Website: www.advancedtechno.com

Avionics Electrical Engineers

Description:
Jets experience a plus
 
Job Location: Midwest
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: jmac@advancedtechno.com
Website: www.advancedtechno.com

Avionics Installer- 1st shift

Description:





PDS TECH INC is currently looking for Avionics Installers for our customer in Long Beach
 



Education and Experience Requirements:



High School diploma/GED. Knowledge of applicable regulatory requirements and customer specifications. Two (2) years of accredited schooling in aviation electronics or two (2) years related work experience. Ability to read and interpret basic blueprints and schematic diagrams.


Position Purpose:



Under minimal supervision, assists in the removal/installation of avionics electrical components, fabrication of wire harnesses, installations, terminations, ring-out, and functional tests of avionics/electrical systems. 

Principal Duties and Responsibilities:
Essential Functions:
1. Assists in installations, modifications, and the fabrication of wiring and electrical components, fixtures, and associated equipment in accordance with blueprints, worksheets, engineering drawings. 2. Maintains required logs and records.
3. Completes tasks within allotted time frame.
4. Ensures that work accomplished meets applicable regulatory requirements and customer specifications.
5. Checks all work and ensures a defective free assembly prior to final inspection.
6. Complies with the company FOD program, tool control program, 5-S program and all safety regulations.
7. Maintains a neat and orderly work area. 

Additional Functions:
1. Properly care for and maintain shop equipment and tools as assigned by Supervisor.
2. Participates in continuous improvement activities (e.g YIAW, Kaizen events, etc.)
3. Performs other duties as assigned. 

Other Requirements:
1. Strong written and verbal skills required.
2. Computer skills and general software knowledge necessary.





 





 
Job Number: 1710078771
Job Location: Long Beach, CA
Per Diem: Yes
Duration: 12 months
Input Date: 02/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Hemant Sachdev
Address: 3130 S HARBOR BLVD STE 100
City, State: SANTA ANA, CA 92704
Phone: 714/540-7900
800 Phone: 800/234-8644
Fax Phone: 714/540-8092
Email: cecjcostamesa@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023Uf9AAE&URLSource=cjhunter

Avionics Installer- 2nd shift

Description:





PDS TECH INC is currently looking for Avionics Installers for our customer in Long Beach

If you are interested and available, please call Karla Pelonis (800) 234-8644 x 20210 and forwarded your updated resume to kpelonis@pdstech.com

 



Avionics installation or maintenance history required. Computer literate required. 



Education and Experience Requirements:



High School diploma/GED. Knowledge of applicable regulatory requirements and customer specifications. Two (2) years of accredited schooling in aviation electronics or two (2) years related work experience. Ability to read and interpret basic blueprints and schematic diagrams.


Position Purpose:



Under minimal supervision, assists in the removal/installation of avionics electrical components, fabrication of wire harnesses, installations, terminations, ring-out, and functional tests of avionics/electrical systems. 

Principal Duties and Responsibilities:

Essential Functions:
1. Assists in installations, modifications, and the fabrication of wiring and electrical components, fixtures, and associated equipment in accordance with blueprints, worksheets, engineering drawings. 2. Maintains required logs and records.
3. Completes tasks within allotted time frame.
4. Ensures that work accomplished meets applicable regulatory requirements and customer specifications.
5. Checks all work and ensures a defective free assembly prior to final inspection.
6. Complies with the company FOD program, tool control program, 5-S program and all safety regulations.
7. Maintains a neat and orderly work area. 

Additional Functions:
1. Properly care for and maintain shop equipment and tools as assigned by Supervisor.
2. Participates in continuous improvement activities (e.g YIAW, Kaizen events, etc.)
3. Performs other duties as assigned. 

Other Requirements:
1. Strong written and verbal skills required.
2. Computer skills and general software knowledge necessary.





 





 
Job Number: 1710073124
Job Location: Long Beach, CA
Per Diem: Yes
Duration: 12 months
Input Date: 02/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Karla Pelonis
Address: 3130 S HARBOR BLVD STE 100
City, State: SANTA ANA, CA 92704
Phone: 714/540-7900
800 Phone: 800/234-8644
Fax Phone: 714/540-8092
Email: cecjcostamesa@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023FS4AAM&URLSource=cjhunter

Avionics/Electrical Contractor (Custom Engineering)

Description:
Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of products and services

Unique Skills:
• Must be proficient at creating design and compliance data to support after-market installations on all company models.
• Must understand FAA/ODA/Industry requirements associated with aircraft modifications.

Education and Experience Requirements:
• Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Essential Functions:
• Contributes to planning, developing and coordinating of important engineering projects
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
• Acts as liaison with representatives outside of the assigned group/area
• Actively works to improve daily processes and ensures all work meets customer requirements
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
 
Job Number: 24-213
Job Location: Savannah, GA
Rate: $58 - $63
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 02/22/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Email: matt@precisionpersonnel.com
Website: www.precisionpersonnel.com

Avionics/Electrical Contractor (Custom Engineering) TS1

Description:
Avionics/Electrical Contractor (Custom Engineering) TS1

Location: Savannah, GA
Pay Rate: $58/hr - $63/hr
Duration: Long Term W2 Contract
Shift: First

Unique Skills:
Must be proficient at creating design and compliance data to support after market installations on all Company aircraft models. Must understand FAA/ODA/Industry requirements associated with aircraft modifications.

Education and Experience Requirements:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

Principal Duties and Responsibilities/Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 8220
Job Location: Savannah, GA
Rate: 58.00-63.00
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 02/19/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: rex@inconen.com
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Cabin Safety Engineer V&V

Description:
Velocity’s client, an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM’s, is seeking multiple Cabin Safety Engineers. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.
Seeking contract engineers to join the team in Seattle with at least five years’ experience with cabin safety engineering, to include:
• Experience and knowledge of FDMS & Water Waste Interior Systems (OEM level preferred)
• Experience with requirements writing at aircraft/systems level
• Experience validating requirements (completeness and correctness) and developing verification matrix (plan and results)
• Familiar with requirements definition, traceability, validation and verification process.
• ARP4754A knowledge and experience
• Proficient at DOORS or similar requirement management tool.
Essential functions:
• System requirements verification and validation.
• Flight test and ground test specifications.
• Support flight test and ground test activities.
• Analyze test data and evaluate system operation.
• Prepare test reports.
Desired Qualifications:
• Experience with FAA Part 25 or Part 23 certification, flight and ground test activities.
• Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
• A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
• Ability to represent the client professionally and positively during client interactions and meetings.
• Bachelor degree in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
 
Job Location: Moses Lake, WA
Start Date: ASAP
Input Date: 01/23/2018
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Completions Electrical Design Engineer

Description:
• Experience with Aircraft Cabin Interiors and Systems to include but not limited to: Cabin Management System, Cabin Entertainment System, Cabin Lighting, Cabin Switch Controls, Telephone System, Satellite communications, Water System, Waste System, EWIS, Cabin interior monuments and Seats
• Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Essential Functions:
• Contributes to planning, developing and coordinating of important engineering projects
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
• Acts as liaison with representatives outside of the assigned group/area.
 
Job Number: 24-183
Job Location: Savannah, GA
Rate: $58 - $63
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 02/06/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

Components Engineer - Level 2 - TX - C

Description:
Chipton-Ross is seeking a Components Engineer - Level 2 for an opening in Dallas, TX.

RESPONSIBILITIES:
Contributes to successful project completion by participating in the resolution of issues such as conflicting design requirements, unsuitability of standard material, and difficult coordination requirements. Plans and conducts the analysis, inspection, design, test, and/or integration to assure the quality of products or components. Performs quality engineering reviews of design documentation for compliance with stated requirements, including vendor quality manuals and company quality records. Applies statistical process control (SPC) methods for analyzing data to evaluate the acceptability of components.

REQUIRED EXPERIENCE:
Must be willing to accept a wide variety of work assignments supporting the total end-to-end process of capturing, designing, developing, testing, manufacturing, and life-cycle support of electronic systems. Responsible for the performance of detailed part level obsolescence management consisting of monitoring BOM's, solving issues, scheduling and managing implementation of fixes, finding new sources, and reacting and solving issues to ensure no production line stoppages. Candidate will work closely with design engineers, interface with other functional areas and vendors, and enforce PMPCP Compliance. The candidate will periodically be required to make presentations to program management and customers.

PREFERRED EXPERIENCE:
Previous experience with obsolescence monitoring tools is a plus (i.e. Qstar, TacTech, Part Miner, Promiere) as well as expertise in all component technologies. Bachelors (or higher) Degree in Electrical Engineering, or other related technical discipline.

EDUCATION:
Accredited High School Diploma/GED

WORK HOURS:
9/80, 1st Shift

MISCELLANEOUS: Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.


 
Job Number: 164049
Job Location: Dallas, TX
Rate: Up to $75.00 DOE
Duration: 12 Months
Input Date: 02/23/2018
Firm Name: CHIPTON ROSS
Attention: Kevin Suk
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: ksuk@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Controls Engineer

Description:
Description:
Designs, supports, performs, and manages a controls function for a larger mechanical or electrical system, which applies control theory to design systems with desired behaviors. Majority of work is for test stands built and operated by Ground Test.

Requirements:
A good understanding of hydraulic systems. Candidate will be asked to work with technicians and other engineers to assemble new systems.
Troubleshoot existing systems and develop design modifications as required achieve performance goals.
Experience with MTS Systems FlexTest Controllers and Programmable Logic Controllers (PLC's) is required.

Education:
Bachelor degree in Electrical or Mechanical Engineering
5+ years of related experience
Experiencing manipulating PLC’s.
 
Job Number: 52948
Job Location: Stratford, CT
Rate: 58.75
Per Diem: Split
Overtime: Yes
Duration: 18 mos.
Start Date: ASAP
Input Date: 12/20/2017
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Eric Ellis
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Checker

Description:
1. Review 3D engineering data for conformance to requirements as directed.
2. Check parts for fit, form and function to the extent that information is available.
3. Must have experience in Product Lifecycle Management (PLM) processes and tools, checking CATIA v5 , SmarTeam, as well as other CAD datasets, in accordance to requirements as directed.

Checkers are responsible for determining the acceptability of data in the following areas:
1. Accuracy and completeness of engineering product definition data, including CAD and PDM data.
2. Proper application and compliance with all Engineering and customer drawing requirements.
3. Use and understanding of GD & T a must.
4. Dimensioning and tolerancing including familiarity with ASME Y14.5.
5. Application of best drafting and design practices and procedures.
6. Applies extensive and diversified knowledge of industry fabrication practices for aircraft parts.
7. Advise Design personnel regarding company drawing and design practices and procedures.
8. Maintain a current and up-to-date knowledge of developments in the structures/systems design disciplines drawing/data requirements, as well as all interrelated disciplines of design build teams.
9. Assist in the research and development of Product Data Management (PDM)/Computer Aided Design (CAD) applications and methodologies for Engineering and when necessary, other departments.
10. Actively works to improve daily processes and ensure that all Data Integrity work and CAD and PDM solutions meet customer requirements.
11. Knowledge of company parts list & PdocM, a plus.
12. Knowledge of CHS, EWIS, Electrical harness Design a plus but not required.

Essential Duties and Responsibilities
1. Checks designs of complex mechanical aircraft interior furnishing, structures, and/or systems.
2. Ensures designs meet customer criteria, quality standards and FAA requirements.
3. Adheres to budget and project schedules.
4. Provides design guidance and feedback to other engineering personnel.
5. Other duties as assigned.
6. Knowledge of industry design and documentation standards.
7. Experience with mechanical assemblies and manufacturing technique design.
8. Ability to work independently and cross-functionally.
9. Experience in communicating with employees/teams in productive and efficient manner. • Strong communication and problem-solving skills.
10. Knowledge of Excel, Share Point software, Microsoft Office a plus

Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 5 ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.
 
Job Number: 24-191
Job Location: Savannah, GA
Rate: $50.00 - $55.00
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 02/06/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer

Description:
Design Engineer

Independence, OH
1 Year Contract
$50.00-60.00/Hr

Summary: Reporting to the Design Lead, the successful candidate will be responsible for supporting detail design and drawing release in support of initial production. Model Based Definition (MBD) drawings shall be compatible with UTAS Landing Systems design methodologies, customer and industry/regulatory requirements and standard practices. The successful candidate will conduct trade studies, generate layouts, perform tolerance stack-ups, and detailed part design and formal drawing release.

Required Qualifications:
• BS in Mechanical or Aerospace Engineering with 8+ years of design experience with a background in mechanisms and hydraulics in aerospace field with work experience with electrical and hydraulic systems routings
• Minimum of 8 years of experience within the Aerospace industry; must include extensive experience in New Product Development of transport and / or military type aircraft components and assemblies . Knowledge of industry standard practices for systems routings. Understanding of requirements management and verification. Understanding of decomposition of system requirements and development of sub-system requirements. Understanding of qualification requirements electrical and hydraulic equipment. CATIA V5 - model based definition (FTA), kinematics, functional tolerance and annotation and drafting / interoperability. Working knowledge of Engineering PDM systems. In-depth knowledge of MS programs (Word, Excel, Project, PPT). Strong communication skills capable of engaging and working directly with suppliers. US citizen, permanent resident alien or able to review all export-controlled technical information. Experience with GD&T (ASME Y14.5) and familiar with ASME Y14.100 and Y14.41 Experience with Matrix One and SmarTeam PDM systems Working knowledge of materials and surface treatments Proficient with MS Word, Excel, and PPT
• Demonstrated ability to utilize Catia V5 with strong emphasis on functional tolerance and annotation module
• Strong interpersonal skills with demonstrated ability to maintain good working relationships with internal and external customers
• Successful candidates must meet all requirements under ITAR & CCGP
• Possess UTAS-LS Enterprise Values including Ethical Behavior, Customer Focused Improvement, Accountability & Teamwork and Openness & Trust
 
Job Number: 8266
Job Location: Indendence, OH
Rate: 50.00-60.00/Hr
Per Diem: No
Overtime: Possible
Duration: 1 Year
Start Date: ASAP
Input Date: 02/05/2018
Firm Name: INCONEN CORPORATION
Attention: Brad
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Support and Training - Instructor - Tech Spec II

Description:
UNIQUE SKILLS
CATIA v5 experienced with 5000+ hours. All Level 1 tools CATIA v5 (Part Design, Assembly, Drafting). Level 2 tools CATIA v5 Generative Surfacing, Free Style Shaping, Generative Sheetmetal, Generative Stress Analysis. Other tools: CATIA v5 Composites, Electrical EHI, Capitol Harness, Tubing experience a plus. Quantitative experience with Geometric Dimensioning and Tolerances a plus. Experience working within PDM systems such as Enovia, SmarTeam or NX/Teamcenter. Formal Classroom instruction experience required for CATIA and PDM.

EDUCATION AND EXPERIENCE REQUIREMENTS
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 10 yrs. in specific technical discipline or 15 yrs. broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs. for Masters and 4 yrs. for PhD in fields applicable to this job.

POSITION PURPOSE
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of client products and services

PRINCIPAL DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

ADDITIONAL FUNCTIONS
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
2. Performs other duties as assigned

OTHER REQUIREMENTS
1. Advanced degree in engineering, or related curriculum preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 17-758-82041
Job Location: Southeast
Rate: $60.00 to $62.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 01/29/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

EHI Engineers

Description:
Develop electrical wiring interconnect system (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wire harness assemblies, utilizing CATIA V5 Electrical and Sheet Metal Work Benches. Capable of interfacing with wiring diagrams, system, and EMI/EMC requirements. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements.
 
Job Location: Savannah, GA
Input Date: 07/07/2014
Firm Name: INCONEN CORPORATION
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Email: cathy@inconen.com
Website: www.inconen.com

Electrical (EWIS) Design Engineer - Catia V5

Description:
Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Company products and services

Essential Functions:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
Catia V5 Required

Unique Skills:
Develop electrical wiring interconnect system (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wire harness assemblies, utilizing CATIA V5 Electrical and Sheet Metal Work Benches. Capable of interfacing with wiring diagrams, systems, and EMI/EMC requirements. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements.
• Aerospace Experience is required
• Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required
• Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative
• Knowledge of Catia V5 Electrical is required

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.
 
Job Number: 372888
Job Location: Savannah, GA
Rate: TBD
Duration: 12 - months
Start Date: ASAP
Input Date: 02/23/2018
Firm Name: CTS INTERNATIONAL
Address: 11100 NE 8TH ST STE 800
City, State: BELLEVUE, WA 98004
Phone: 425/646-2688
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com

Electrical (EWIS) Engineer W/Catia V5-TS II

Description:
Electrical (EWIS) Engineer w/Catia V5-TS II
Savannah, GA
Rate: $70-$77

Unique Skills:

Develop electrical wiring interconnect system (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wire harness assemblies, utilizing CATIA V5 Electrical and Sheet Metal Work Benches. Capable of interfacing with wiring diagrams, systems, and EMI/EMC requirements. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements. • Aerospace Experience is required • Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required • Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative • Knowledge of Catia V5 Electrical is required


Education and Experience Requirements:

Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.


Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

Principle Duties and Responsibilities:

Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7977
Job Location: Savannah, GA
Rate: $70-$77
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 02/19/2018
Firm Name: INCONEN CORPORATION
Attention: Cathy O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: cathy@inconen.com
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical (EWIS) Engineer-TS II

Description:
Electrical (EWIS) Engineer-TS II
Savannah, GA
Rate: $70-$77

Unique Skills:

Develop electrical wiring interconnect systems (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wiring diagrams, cable/wire harness assemblies, and rack/panel designs from electrical system schematics adhering to EWIS requirements. Select qualified electrical components such as connectors, backshells, and other parts. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements. • Aerospace Experience is required • Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required • Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative • Knowledge of Mentor Graphics Capital Harness Systems (CHS) is strongly desired


Education and Experience Requirements:

Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.


Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

Principle Duties and Responsibilities:

Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7976
Job Location: Savannah, GA
Rate: $70-$77
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 02/05/2018
Firm Name: INCONEN CORPORATION
Attention: Cathy O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Electrical Applications Engineer

Description:
Hiring in multiple locations

Email your resume or apply online

Benefits Available
- long term contracts
- top per diem rates
- direct deposit
- referral bonuses
- 401(k) program
 
Input Date: 05/09/2017
Firm Name: NESC STAFFING
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
800 Phone: 800/562-3463
Email: lokeefe@nesc.com
Website: www.nesc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Applications Engineering

Description:
UNIQUE SKILLS
Experience with Autocad required. Aerospace experience required. Experience or knowledge of electrical connectors, backshells, shielding, wiring and electrical connectivity is required. Be Familiar with CFR 14 Part 25 and AS50881. Candidate must be able to create wiring diagrams and schematics to include the selection of qualified electrical components such as connectors, backshells and other electrical parts. Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required. Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project.

JOB DESCRIPTION
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs. in the specific technical discipline or 10 yrs. broad engineering experience in several technical disciplines with Bachelors, or 3 yrs. in the specific technical discipline with Masters, or 1 yr. in the specific technical discipline with PhD. Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

PRINCIPAL DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

ADDITIONAL FUNCTIONS
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

OTHER REQUIREMENTS
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 17-736-93664
Job Location: Southeast
Rate: $58.00 to $63.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 01/29/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

Electrical Applications Engineering Contractor

Description:
PDS Tech is seeking an Electrical Applications Engineer for an open position in Savannah, GA.
In your role, you will:

 

Unique Skills:



Experience with Autocad required.

Aerospace experience required.

Experience or knowledge of electrical connectors, backshells, shielding, wiring and electrical connectivity is required. Be Familiar with CFR 14 Part 25 and AS50881. Candidate must be able to create wiring diagrams and schematics to include the selection of qualified electrical components such as connectors, backshells and other electrical parts. Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required.



Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of products and services

Principal Duties and Responsibilities:

Essential Functions:

1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned


As our ideal candidate, you will meet the following requirements:
  • Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements. 

Education/Experience:

  • Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
  • 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical

POC: Clyde (813) 426-9917 or ccallwood@pdstech.com

PDS Tech, Inc. is an Equal Opportunity Employer and will not discriminate against applicants on the basis of race, color, religion, sexual orientation, gender identity, national origin, veteran status, or disability.
 
Job Number: 1710063879
Job Location: Savannah, GA
Per Diem: No
Duration: 6 months
Input Date: 02/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Clyde Callwood
Address: 3922 COCONUT PALM DR STE 100
City, State: TAMPA, FL 33601
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002GKHeAAO&URLSource=cjhunter

Electrical Applications Engineers

Description:
Develop electrical wiring interconnect systems (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wiring diagrams, cable/wire harness assemblies, and rack/panel designs from electrical system schematics adhering to EWIS requirements. Select qualified electrical components such as connectors, backshells, and other parts. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements. Mentor L-Cable
 
Job Location: Savannah, GA
Input Date: 07/07/2014
Firm Name: INCONEN CORPORATION
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Email: cathy@inconen.com
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design Engineer (Contract)

Description:
Keltia Design in Everett, is a technical support services company supplying technical recruiting, CAD training, and engineering design services to customers in the Aerospace industry on a permanent or contractual basis.

Responsibilities include the design, development, qualification, and documentation of technical data packages, which are used for electrical systems modification programs involving commercial transport category aircraft. Additionally, provide engineering support for existing manufactured product through investigation, problem resolution, ECN/EO and drawing revision documentation.

Relevant experience creating wiring diagrams and drawings, wire
drawings, PLC, schematics, routing and clipping installation drawings,
and wire harness fabrication drawings. Note, an understanding of ATA
Chapter Codes, the use of aircraft manuals (IPC, M/M, and W/D), and
the use of electrical production illustration drawings is desirable.
Experience with Airbus is required

A Bachelor degree and experience utilizing CATIA V5 and/or AutoCad is preferred If you are interested please email me your updated word formatted resume, with your salary requirements and availability
 
Job Number: KEL123117
Job Location: LA, CA
Rate: $65
Per Diem: Yes
Overtime: No
Duration: 6mo
Start Date: soon
Input Date: 12/31/2017
Firm Name: KELTIA DESIGN INC
Attention: Mary
Address: 2615 W CASINO RD UNIT 1A
City, State: EVERETT, WA 98204
Phone: 206/368-9812
Fax Phone: 206/237-8950
Website: www.keltia-design.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design and Cabin Management Eng Contractor TS II

Description:
UNIQUE SKILLS
Experience in engineering design of electrical systems that are part of and support aircraft interiors. This includes entertainment, power, lighting, cabin management and communication systems. Experience in creating wiring diagrams, schematics, wire harness drawings, electrical installation drawings and completing supporting analysis/calculations (e.g. voltage drop) AutoCAD, CATIA V5 and SmarTeam experience preferred Take ownership of deliverables produced & their quality. Coordination with the other Engineering disciplines, client and vendors. Experience with leadership/program management on a design program. Take lead role in the process of preparation of design deliverables to ensure appropriate checking & review of all documents / drawings before release.

EDUCATION AND EXPERIENCE REQUIREMENTS
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs. in specific technical discipline or 15 yrs. broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs. for Masters and 4 yrs. for PhD in fields applicable to this job.


POSITION PURPOSE
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of client products and services

PRINCIPLE DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

ADDITIONAL FUNCTIONS
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

OTHER REQUIREMENTS
1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 17-776-111061
Job Location: Southeast
Rate: $65.00 to $70.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 01/29/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design and Cabin Management Engineer

Description:
Electrical Design and Cabin Management Engineer

Location: Savannah, GA
Pay Rate: $65/hr - $70/hr
Duration: Long Term Contract
Shift: First

Unique Skills:
-Experience in engineering design of electrical systems that are part of and support aircraft interiors.
-This includes entertainment, power, lighting, cabin management and communication systems.
-Experience in creating wiring diagrams, schematics, wire harness drawings, electrical installation drawings and completing supporting analysis/calculations (e.g. voltage drop)
-AutoCAD, CATIA V5 and SmarTeam experience preferred.
-Take ownership of deliverables produced & their quality.
-Coordination with the other Engineering disciplines, client and vendors.
-Experience with leadership/program management on a design program.
-Take lead role in the process of preparation of design deliverables to ensure appropriate checking & review of all documents / drawings before release.

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Company products and services

Principle Duties and Responsibilities/Essential Functions:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.
Other Requirements:
1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 7764
Job Location: Savannah, GA
Rate: 65-70
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 02/14/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical EWIS Eng w/Catia V5 - TS II

Description:
UNIQUE SKILLS
Develop electrical wiring interconnect system (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wire harness assemblies, utilizing CATIA V5 Electrical and Sheet Metal Work Benches. Capable of interfacing with wiring diagrams, systems, and EMI/EMC requirements. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements. • Aerospace Experience is required • Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required • Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative • Knowledge of Catia V5 Electrical is required

EDUCATION AND EXPERIENCE REQUIREMENTS
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

POSITION PURPOSE
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of client products and services

PRINCIPLE DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

ADDITIONAL FUNCTIONS
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

OTHER REQUIREMENTS
1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 17-795-116742
Job Location: Southeast
Rate: $58.00 to $63.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 01/29/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

Electrical EWIS Engineer/ Electrical Apps

Description:
Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services

Unique Skills:
• Develop electrical wiring interconnect systems (EWIS), capable of resolving all technical issues relating to EWIS.
• Produce and maintain wiring diagrams, cable/wire harness assemblies, and rack/panel designs from electrical system schematics adhering to EWIS requirements.
• Select qualified electrical components such as connectors, backshells, and other parts.
• Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements
• Aerospace Experience is required
• Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required
• Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative
• Knowledge of Mentor Graphics Capital Harness Systems (CHS) is strongly desired

Education and Experience Requirements:
• Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required.
• 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.



Essential Functions:
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Is consulted extensively by associates and others as a recognized authority within the field
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
• Approach to problem solving balances technical product, cost and schedule
• Works without appreciable direction; work is reviewed from a long-range perspective for desired results
• Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
 
Job Number: 24-204
Job Location: Savannah, GA
Rate: $58 - $63
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 02/22/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Email: matt@precisionpersonnel.com
Website: www.precisionpersonnel.com

Electrical EWIS Engineer/EHI

Description:
Position Purpose:

Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services


Unique Skills:


• Develop electrical wiring interconnect system (EWIS), capable of resolving all technical issues relating to EWIS.
• Produce and maintain wire harness assemblies, utilizing CATIA V5 Electrical and Sheet Metal Work Benches.
• Capable of interfacing with wiring diagrams, systems, and EMI/EMC requirements.
• Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements.
• Aerospace Experience is required
• Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required
• Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative
• Knowledge of Catia V5 Electrical is required

Education and Experience Requirements:

• Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required.
• 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Principle Duties and Responsibilities:

• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Is consulted extensively by associates and others as a recognized authority within the field
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
• Approach to problem solving balances technical product, cost and schedule
• Works without appreciable direction; work is reviewed from a long-range perspective for desired results
• Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
 
Job Number: 24-205
Job Location: Savannah, GA
Rate: $58 - $63
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 02/22/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Email: matt@precisionpersonnel.com
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
•Location; Midwest Oklahoma
•Must have a Bachelors in Engineering
•DOD Clearance is NOT required
•This position will support our Air Traffic Control and Landing Systems (ATCALS) and B-1 customers, by solving electrical sustainment issues. The sustainment projects address obsolete components in multiple instrumentation, control, power, electronic, electro-mechanical interface systems. The engineer will work under the direction of a lead engineer to:
• Provide technical solutions and make improvements or modification to produce the desired results
• Develop technical documentation and publications relating to users, systems, processes, work flows, operations, products, and services.
• Create new electrical schematics
• Ensure proper system artwork generation
• Implement design changes of existing components
• Write engineering change orders

Additional Details:
•Candidates must be a U.S. Citizen
•Full Time – Non Exempt
•Ensure candidate experience relates to that provided in job description and experience is clearly identifiable on resume for client review
•Opportunity for contract-to-hire based on worker performance, worker attendance and dependability and client business needs.
•Start date will be moved up as needed in order for selected candidate to start ASAP once on-boarding is completed/clear and final clearance is obtained.
•Be sure your candidates are available to start right away once on-boarding is complete.
•Worker will utilize DelTek for weekly time reporting. It is imperative that the registration is completed as soon as possible after receipt of registration invitation. Your attention to this process will eliminate delays in receipt of worker hours and invoice creation.
•There is a chance for some OT (overtime) as needed and must be approved by KBRwyle supervisor
•Client manager will conduct phone and in-person interview.
 
Job Location: Midwest, OK
Rate: $29-32
Overtime: Possible
Duration: Full Time – Non Exempt
Start Date: ASAP
Input Date: 01/29/2018
Firm Name: MIDCOM CORPORATION
Attention: Juan Johnson
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
SUMMARY
Performs a variety of engineering work including design, analysis, substantiation, certification, drawing interpretation and project management as related to transport category aircraft.

ESSENTIAL DUTIES AND RESPONSIBILITIES
Create step by step work instructions for the removal and installation of hardware and components as they relate to aircraft structures, systems, interiors and avionics. Troubleshooting of noted aircraft systems Repair, design and analysis of metal, composite and metal bond structures Knowledge of the Federal Aviation Regulations FARs from Title 14 of the Code of Federal Regulations as they apply to transport category aircraft. Knowledge of cabin specific regulatory requirements, including flammability and crashworthiness as examples Familiarity with the Supplemental Type Certificate STC process Familiarity with the FAA Airworthiness Directive AD process and rules governing disposition Translates guidance and engineering principles and procedures into usable working direction for assigned projects Ability to read and interpret technical drawings, preferably those created by Boeing, Airbus and Douglas. They should also be familiar with the documents needed to routinely maintain commercial aircraft Structural Repair Manual SRM, Aircraft Maintenance Manual AMM, Illustrated Parts Catalog IPC, etc. Ability to analyze Original Equipment Manufacturer OEM source documents Service Bulletins, Service Letters, etc. and make independent decisions based on analysis of available data regarding incorporation on Customers fleet. Ability to quickly learn and adhere to Operators specific processes and procedures. Project Management skills multiple task Gathers, coordinates and applies basic engineering data using established and appropriate or defined engineering principles and procedures Applies area of specialty to design, develop and implement creative and innovative solutions to difficult problems Reviews progress with management and recommends corrective action along with review of alternatives Performs such individual assignments as supervisors and superiors may direct ensures adequate and continuous controls are exercised over all assigned activities affecting quality establishes and maintains effective work relationships within the department, the Corporation and the community and maintains the professional competence, knowledge and skill necessary for the satisfactory performance of all assigned responsibilities Travel as required All other duties as assigned.
 
Job Number: 17-729
Job Location: Midwest
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 01/29/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

Electrical Engineer

Description:
PDS is seeking a Electrical Engineer TS I  for an open position in Savannah, GA.
In your role, you will:


Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of products and services

Principal Duties and Responsibilities:

Essential Functions:

1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
2. Performs other duties as assigned

Education and Experience Requirements:



Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 10 yrs in the specific technical discipline or 15 yrs broad engineering experience in several technical disciplines with Bachelors, or 8 yrs in the specific technical discipline with Masters, or 6 yrs in the specific technical discipline with PhD. 

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline

Unique Skills: Candidate shall have experience in one or more of the following: Electronic hardware design, Data acquisition system design, Industrial process measurement

POC: Clyde (813) 426-9917 or ccallwood@pdstech.com 
 
Job Number: 1710071488
Job Location: Savannah, GA
Duration: 6 months
Input Date: 02/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Clyde Callwood
Address: 3922 COCONUT PALM DR STE 100
City, State: TAMPA, FL 33601
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i5000000238B7AAI&URLSource=cjhunter

Electrical Engineer

Description:
Many more engineering, IT, and manufacturing openings throughout the U.S. Check our website www.chiptonross.com for a complete list of current openings

Benefits:
Holiday Pay, Weekly Pay, Vacation Pay, Referral Bonus, Group Health Insurance, Delta Dental, 401(k), Direct Deposit
 
Job Number: 164437
Job Location: New Jersey
Input Date: 07/31/2017
Firm Name: CHIPTON ROSS
Attention: Brenda Ordaz
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
800 Phone: 800/927-9318
Email: bordaz@chiptonross.com
Website: www.chiptonross.com

Electrical Engineer

Description:

PDS Tech, Inc. is seeking an Electrical Engineer for a position located in Kansas City, MO. 
Must hold an active clearance (preferably a DOE Q, or could be a DOD TS).

The Client's organization has several open opportunities for Electrical Engineers.  We are seeking engineers who are interested in supporting one or more of the following areas:  electrical and/or electronic components and major assemblies; discrete and custom devices; complex cables; RF/radar/antenna devices and components; test equipment hardware and/or software; test & controls; purchased and COTS products; control account management.

  • Performs project planning and manages project resources, including multiple individuals and disciplines, to achieve quality, delivery, and cost objectives.
  • Conducts research and development experiments to resolve complex engineering and quality problems involving highly technical, scientific methods.
  • Writes technical reports on results and conclusions drawn from experiments conducted and incorporates findings in formal specifications.
  • Translates design agency concepts into production items by coordinating the activities of engineering, quality, manufacturing, and related organizations.
  • Estimates set-up times, flow times, costs of production and acceptance equipment, and compiles cost estimates and delivery quotations, monitors performance, and prepares reports, statistics, and recommendations for management review.
  • Contributes to business growth through the pursuit of new technology; participates in establishing operating procedures on new products and components.
  • Defines and recommends new designs, design changes, and alternate designs of instruments, and test equipment, and orders tooling, gaging, and equipment necessary to assure product quality.
  • Plans and performs engineering testing and development programs and uses advanced statistical and scientific methods to address and resolve critical engineering and production problems to assure product manufacturability.
  • Originates, refines, and releases complex manufacturing or inspection work directions.
  • Determines acceptability of processes and materials in conjunction with customers, design agency, quality, and other affected organizations.
  • Interacts with customers, design agency and/or supplier counterparts to resolve moderate to complex design, development, production and acceptance issues.
  • Based on research, applies, develops and recommends innovative methodologies and technologies which are equal to the industry's state of the art to resolve processing and design problems.
  • Provides technical consultation to management and others, and leads technical project teams. 
  • Responsible for work that may involve longer range and/or complex business objectives in field of expertise.
  • Evaluates and implements innovations and technological advances that improve quality, reduce flowtime, improve productivity, and enhance operational surety.
  • Performs highly complex calibration and measurement services, recommends changes in calibration procedures to improve services, and solves special measurement problems.
  • May perform other duties as required.
  • Conducts activities in a safe and healthy manner and works in accordance with established HS&E requirements to ensure the protection of employees, the public, and the environment.  Takes actions necessary to "stop" work when an unsafe condition or action is identified.  Every employee has the right and responsibility to stop work when unsafe conditions or actions are identified.

Basic Qualifications: 
  • US citizenship in order to obtain and maintain US Dept of Energy "Q" level security clearance.
  • Bachelor of Science degree in Electrical Engineering from an ABET accredited program or an equivalent ABET accredited engineering degree.
  • Minimum two (2) years directly applied engineering experience.


Additional Qualifications: 

  • Five (5) or more years directly applied engineering experience in a technology and/or manufacturing environment preferred.
  • Advanced degree in an engineering, physics or business discipline is advantageous.
  • Six Sigma certification (black belt; green belt) preferred.
  • Experience/history reflective of executing continuous improvement toward products and/or processes.
  • Technical project management experience.
  • Experience/familiarity with enterprise resource planning and/or earned value management systems.
  • Experience presenting technical material to varied levels of audiences.
  • Willingness to travel up to 25% of time.

 
Job Number: 1710068676
Job Location: KS City, MO
Duration: 6 months
Input Date: 02/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Tanya James
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002Jr0WAAS&URLSource=cjhunter

Electrical Engineer

Description:
Hiring in multiple locations

Email your resume or apply online

Benefits Available
- long term contracts
- top per diem rates
- direct deposit
- referral bonuses
- 401(k) program
 
Input Date: 05/09/2017
Firm Name: NESC STAFFING
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
800 Phone: 800/562-3463
Email: lokeefe@nesc.com
Website: www.nesc.com

Electrical Engineer

Description:
Electrical Engineer

Location: Savannah, GA
Pay Rate: $58/hr - $63/hr
Duration: Long Term Contract
Shift: First

Unique Skills:
-This position will review designs for Electrical Systems aspects.
-Activities include interacting and coordinating with DERs/ARs during a certification project, coordinating, tracking and completing certification tasks, writing certification plans, test plans, test reports and preparing related paperwork and forms.
-The ideal candidate will have:
-At least one (1) year experience with certification activities associated with STC projects
-Experience with aircraft interior outfitting preferred.
-Current Electrical Systems DER/AR designation preferred
-EWIS experience desirable

Education and Experience Requirements:
-Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

-Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area.

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7129
Job Location: Savannah, GA
Rate: 58.00-63.00
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 02/19/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: rex@inconen.com
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Aerospace launch systems

Description:
Integration & Test Electrical Engineer

Specific duties include hands-on electrical integration of flight hardware, developing/maintaining processes and procedures for vehicle assembly and vehicle testing, hands-on electrical testing of flight hardware, and documenting and pursuing root cause of discrepancies found with hardware.
• Bachelor’s Degree (BS) in Electrical Engineering
• 10 years of electrical hands-on integration & test or related experience is required
• Ability to work in a fast pace team environment and multi-task
• Strong written and verbal communication skills
• Ability to solve problems
ABILITY TO OBTAIN AN ACTIVE SECRET PREFERRED
 
Job Number: 951357
Job Location: multiple
Rate: market rate
Per Diem: yes
Overtime: possible
Duration: 12 months + Contract
Start Date: mid Febuary
Input Date: 12/28/2017
Firm Name: ADVANCED TECHNOLOGY
Attention: Domenic
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Level 2

Description:
Electrical Engineer - Level 2 (Integrated Circuit Layout Engineer)

Location: Santa Barbara, CA
Pay Rate: DOE ($50/hr - $70/hr)
Duration: 1 year W2 contract
Shift: First, 4x10, no OT
**MUST be a U.S. CITIZEN**
**MUST be ELIGIBLE to obtain a SECRET CLEARANCE**

Description
INTEGRATED CIRCUIT LAYOUT ENGINEER - Performs transistor level silicon layout of CMOS integrated circuits for read-out integrated circuit infrared applications.

Skill/Experience/Education (Mandatory):
-Performs transistor level silicon layout of CMOS integrated circuits for read-out integrated circuit infrared applications.
-IC Layout Engineering: CMOS VLSI transistor level layout (4-5 years' required)
-BS degree or higher.
-Must be U.S. Citizen.
 
Job Number: 7887
Job Location: Santa Barbara, CA
Rate: 50-70
Per Diem: Split Possible
Overtime: No
Duration: 1 year
Start Date: ASAP
Input Date: 02/05/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Level 3

Description:
Electrical Engineer – Level 3

Location: Cape Canaveral, FL
Pay Rate: DOE
Duration: 1 year W2 contract
Shift: not specified, exempt OT
**MUST be a U.S. CITIZEN**


Job Description / Responsibilities:
-The Electrical Engineer Level 3 will prepare and coordinate predominantly Electrical design, construction and troubleshoot interfaces for launch facilities electrical systems and support equipment installations at CCAFS for this Company.
-The successful candidate, as part of Company's Engineering and Infrastructure Team, shall be required to produce accurate working schematics and detailed design drawings as well as generate validating electrical analysis calculations.
-He/she will perform field walk-downs and review and revise electronic CAD files from a variety of native drawing databases to produce accurate drawings for implementation of the project.
-Candidate will ensure all projects are maintained on implementation schedules and within established engineering budgets.
-May conduct feasibility studies, determine engineering criteria or manpower and cost estimates for projects or tasks, or perform analyses to develop design/redesign options, improvements, or recommendations for systems and components.
-Evaluate components for life assessment and market requirements.
-Researches, develops, designs, and tests electrical components, equipment, systems, and networks.
-Actively supports system operation, trouble shooting and maintenance.
-This position requires knowledge of Electrical design of commercial medium voltage equipment and systems, drafting practices as well as a sound practical knowledge of engineering principles, practices, and industry standards including NFPA 70e and NEC codes.
-Candidate shall have the ability to successfully interface with contractor personnel which requires onsite observation and direct contact in the field working with Union Workforce personnel.

-Duties shall include, but not limited to, Contractor walk downs, Request for Information evaluation and resolution, Statements of Work and Field Work Directives development.
-Bachelor's degree highly preferred

-The successful candidate should have at least (10) years of relevant experience building and/or modifying facilities electrical systems.
-Also, he/she should have at least (5) years of recent Autodesk AutoCAD experience (version 2013 or newer).
 
Job Number: 8439
Job Location: Cape Canaveral, FL
Rate: DOE
Per Diem: Split Possible
Overtime: Exempt
Duration: 1 year
Start Date: ASAP
Input Date: 02/14/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Electrical Engineer - Level 3

Description:
Electrical Engineer - Level 3 (ACTIVE DoD SECRET REQUIRED)

Location: Lexington, KY
Pay Rate: DOE ($35/hr - $45/hr)
Duration: 9 month W2 contract
Shift: First, 5/40, no OT
**MUST be a U.S. CITIZEN**
**MUST have an ACTIVE DoD SECRET CLEARANCE**

Description
As an Electrical Engineer, you will work as part of an engineering team. The team is focused primarily on modifying existing hardware and integrating components into various platforms based on customer specifications.
Your job will be to develop component and system designs based on customer requirements and interface control documents or other similar information. Your designs will comply with applicable military specifications, SAE, ANSI, ASME, and other related design and drafting standards.
Upon design completion, you will be expected to support the fabrication, installation, and integration of your design by providing support to the manufacturing and installation workforce as required.
Experience with aircraft wiring and electrical systems
Ability to create and review various electrical drawing types (wire diagram, termination, cable harness, routing)
Experience with AutoCAD or similar 2D drafting tool Demonstrated previous success working in a team based environment to meet objectives
Strong communication skills, both oral and written Familiarity with SAE AS50881 design guidelines
Understanding of ANSI/ASME Y14.100 or related design and drafting standards
Familiarity with C-130 or other fixed wing aircraft Experience with an engineering change process and/or configuration control process

Skill/Experience/Education (Mandatory):
ACTIVE DoD SECRET CLEARANCE
AutoCAD – (4+ years required)
MS Office Suite – (4+ years required)

Desired:
CATIA V5
TeamCenter Engineering
JobScope/ IT Reports
 
Job Number: 8325
Job Location: Lexington, KY
Rate: 35.00-45.00
Per Diem: Split Possible
Overtime: No
Duration: 9 mos
Start Date: ASAP
Input Date: 02/19/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: rex@inconen.com
Website: www.inconen.com

Electrical Engineer - Product/Process

Description:
PDS Tech, Inc. is seeking a Product/Process Electrical  Engineer for a position located in Kansas City, MO. 
Must hold an active clearance (preferably a DOE Q, or could be a DOD TS).

This Electrical Engineer position will fulfill a technical role in the Secure Electronics organization. Engineers in this organization provide engineering support of highly technical and advanced manufacturing processes typically requiring specialized qualifications, knowledge, and/or skill. This engineer will perform project management, as well as, design, development, evaluation, and quality control functions on complex engineering projects and electrical assembly devices. While in the position, increasing roles of project leadership are expected. This position will exercise considerable latitude in determining technical objectives of assignments.

Summary of Duties:   
 Performs project planning and manages project resources, including multiple individuals and disciplines, to achieve quality, delivery, and cost objectives.
  • Conducts research and development experiments to resolve complex engineering and quality problems involving technical, scientific methods.
  • Writes technical reports on results and conclusions drawn from experiments conducted and incorporates findings in formal specifications.
  • Translates design agency concepts into production items by coordinating the activities of engineering, quality, manufacturing, and related organizations.
  • Estimates set-up times, flow times, costs of production and acceptance equipment, and compiles cost estimates and delivery quotations, monitors performance, and prepares reports, statistics, and recommendations for management review.
  • Participates in establishing operating procedures on new products and components.
  • Defines and recommends new designs, design changes, and alternate designs of instruments, and test equipment, and orders tooling, gaging, and equipment necessary to assure product quality.
  • Plans and performs engineering testing and development programs and uses advanced statistical and scientific methods to address and resolve critical engineering and production problems to assure product manufacturability.
  • Originates, refines, and releases complex manufacturing or inspection work directions.
  • Determines acceptability of processes and materials in conjunction with customers, design agency, quality, and other affected organizations.
  • Based on research, applies, develops and recommends innovative methodologies and technologies which are equal to the industry's state of the art to resolve processing and design problems.
  • Provides technical consultation to management and others, and leads technical project teams.
  • Responsible for work that may involve longer range and/or complex business objectives in field of expertise.
  • Evaluates and implements innovations and technological advances that improve quality, reduce flowtime, improve productivity, and enhance operational surety.
  • Performs highly complex calibration and measurement services, recommends changes in calibration procedures to improve services, and solves special measurement problems.
  • May perform other duties as required.
  • Conducts activities in a safe and healthy manner and works in accordance with established HS&E requirements to ensure the protection of employees, the public, and the environment. Takes actions necessary to "stop" work when an unsafe condition or action is identified. Every employee has the right and responsibility to stop work when unsafe conditions or actions are identified.

Basic Qualifications: 
  • US citizenship in order to obtain and maintain US Dept of Energy "Q" level security clearance.
  • Bachelor of Science degree in Electrical Engineering from an accredited Engineering program.
  • Two (2) or more years of relevant experience in engineering of products or processes or comparable related technical area. 

Additional Qualifications:  
 
  • Existing DOE Q clearance.
  • MS in Electrical Engineering from ABET accredited institution.
  • Five (5) or more years of relevant, progressive experience preferred in engineering of products or processes or comparable technical area.
  • Demonstrated experience in project leadership.
  • Broad knowledge of manufacturing or quality processes and techniques.
  • Ability to apply advanced design, development, evaluation, and quality control techniques to highly complex.
  • Electrical Engineering concepts and projects.
  • Ability to work without supervision, with latitude for independent action and decision making.
  • Ability to provide technical guidance, project management, consultative services, and innovative solutions.
  • RF engineering experience.
  • Strong communication skills, both written and verbal.
  • Demonstrated technical innovation and problem solving.
  • Significant experience in a manufacturing or design environment.

 
Job Number: 1710068677
Job Location: KS City, MO
Duration: 6 months
Input Date: 02/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Tanya James
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002Jr0bAAC&URLSource=cjhunter

Electrical Engineer - Sr Electrical Engineer 2

Description:
PDS Tech, Inc. is seeking a Electrical Engineer - Sr 2 for an open position in Cedar Rapids, IA.
  • Primary assignments will include design, development, documentation, integration, testing, and module and system level verification of any and all Government Systems RF power amplifier designs.
  • They must demonstrate strong interface skills with both internal and external customers, as well as subcontractors.
  • In addition, the individual may be required to technically lead a RF power amplifier design and verification team with clear focus on aggressive design to cost and schedule goals. 
  • The successful candidate will be a self-starter, be able to handle unexpected events and take advantage of opportunities and events to achieve excellent results.
  • The individual must be able to communicate with employees at all levels in the organization.
  • Additionally candidate must be able to demonstrate excellent problem solving, data analysis, and critical thinking skills. 

Required Experience:
  • At least one (1) year of prior RF hardware design covering the HF, VHF / UHF, L-band and/or S-band 
  • Experience in some or all aspects of RF hardware development life cycle including requirements capture and validation, design and development, sub-level and system level integration and testing. 


Desired Experience/Skills:

  • Prior RF power amplifier hardware design experience.
  • Military communications and data links experience is desirable 
  • RF CAE tool experience with VSS, Agilent ADS or AWR MWO, and\or Ansoft HFSS (analog and digital tool experience a plus)
  • Experience in requirements generation and validation, allocation and traceability
  • Experience with documentation and spreadsheet tools e.g. Microsoft Excel, PowerPoint, Project, Word, etc.
  • Ability to understand and be capable of interpreting, investigating, designing, and testing to the current version of DO-254

Applicants must be capable of obtaining a U.S. DoD Secret Clearance. U.S. Citizenship is required. Candidate selected will be subject to a government security investigation and must meet eligibility requirements. Strongly prefer clearance to be active, must be willing and able to obtain one, but not a requirement.
 
Job Number: 1710078619
Job Location: Cedar Rapids, IA
Duration: 12 months
Input Date: 02/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Jason Andrzejewski
Address: P O BOX 619820
City, State: DALLAS, TX 75261-9820
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9636
Email: cecjnrt@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023UGxAAM&URLSource=cjhunter

Electrical Engineer 2 - O/M - LA

Description:
Chipton-Ross is seeking a Electrical Engineer 2 for an opening in Avondale, LA.

RESPONSIBILITIES:
Candidate will be responsible for establishing, overseeing, and managing all activities related to assigned shipboard systems. Candidate will perform the following: Research, development, and design of electrical components, equipment, systems, and networks in accordance with all contractual requirements, military and commercial specifications; initiate procurement specifications; review and approve vendor proposals; review, comment on, adjudicate and approve vendor furnished information for translation into construction products; interface with vendors and Navy technical representatives; support vendor design reviews and testing; develop drawings and other documents IAW Mil-Specs and contract drawings; interface with other disciplines and departments to ensure a seamless integration of assigned systems into the shipboard environment; address and resolve technical issues, and make decisions on problems in his/her area of responsibility; support shipbuilding production department as required.

REQUIRED EXPERIENCE:
Bachelor's of Electrical Engineering with two years of engineering experience or Master's of Electrical Engineering with no prior experience, or similar degree background. . Previous shipbuilding experience is highly desired. A qualified candidate should be proficient in Microsoft Office applications and AutoCAD 2014.

ADDITIONAL EXPERIENCE:
It is preferred that the candidate be familiar with shipboard Interior Communications systems such as Switchboards, Telephone systems, Announcing, TV and Audio, Alarms, Indicating, etc. and have an understanding of the typical shipboard interfaces, interconnections, and integration requirements. Familiarity with electrical power distribution systems, control systems, and C4ISR systems is a plus. Current clearance is also a plus.

EDUCATION:
Bachelor's of Electrical Engineering

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 155942
Job Location: Avondale, LA
Rate: $42 to $46.00 DOE
Duration: 1 year
Input Date: 02/23/2018
Firm Name: CHIPTON ROSS
Attention: Andrew Craft
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: acraft@chiptonross.com
Website: www.chiptonross.com

Electrical Engineer 2 - WA

Description:
Chipton-Ross is seeking an Electrical Engineer 2 located in Bingen, WA

RESPONSIBILITIES:
Analyzes and interprets electrical system/subsystem requirements and specifications. Develops requirements and specifications for printed circuit board assemblies. Performs risk assessments and makes mitigation recommendations. Decomposes system requirements. Creates electronic hardware module-level architectures. Develops detailed electrical hardware and firmware designs. Identifies electronic hardware interface controls conflicts and makes recommendations. Creates electronic hardware documentation release packages. Develops and performs verification and validation procedures for electronic hardware components. Conducts testing/ analysis of avionics/electrical components, equipment, and systems. Documents technical performance metrics. Diagnoses malfunctions in existing products and makes design improvements and/or modifications.

REQUIRED EXPERIENCE:
"Ability to analyze problems (troubleshooting, fault isolation, repair, modification, or redesign) of assigned end items to support the design, development and modification of company products using knowledge of engineering disciplines (ME, EE, etc.).
"Knowledge of digital circuit design parameters (e.g., throughput, rise time, clock frequencies, propagation delay) and hardware description languages (e.g., Hardware Description Language [HDL], Verilog). Knowledge of computer hardware and software components (e.g., processors, memory, interfaces, high order languages), and characteristics (e.g., throughput, processing architecture, timing, capacity).
"Knowledge of electrical engineering theories (e.g., Kirchhoff's Law, Ohm's Law, lighting, power factor, control theory), formula selection (e.g., room cavity ratios, short-circuit, voltage drop, motor counts, capacitor, harmonic correction, load calculations), and methods (e.g., relay coordination, root cause analysis).
"Knowledge of Electromagnetic Interference (EMI) and Electromagnetic Compatibility (EMC) considerations with respect to electrical/electronic design (e.g., wire harness design, grounding and shielding design techniques, lightning protection).
"Exercises engineering judgment in developing appropriate decisions considering decision criteria, implications, and possible consequences, to ensure product design integrity. Demonstrates understanding of the applicable scientific and engineering knowledge and involves others in obtaining information for the engineering decision-making process.
"Knowledge of various engineering disciplines such as electrical, mechanical, and systems. The ability to communicate with technical personnel from multiple skill areas and functions to evaluate technical information and issues impacting design, production, and support of products, services, or other deliverables.

EDUCATION:
This job is limited to employees who, in the performance of their assigned work, regularly apply engineering disciplines to the research, design, development, test, and evaluation of company products, facilities, or manufacturing process and have a minimum of a Bachelor's degree of Science from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. Typical experience: 2-4 years in an engineering classification with a Bachelor's degree or 0-2 year's experience in an engineering classification with a Master's degree.

WORK HOURS:
Full-Time

 
Job Number: 165599
Job Location: Bingen, WA
Rate: $DOE
Duration: 6 Months
Input Date: 02/23/2018
Firm Name: CHIPTON ROSS
Attention: Brenda Ordaz
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: bordaz@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer II ( Chandler, AZ ) 7802712

Description:
Electrical Engineer II ( Chandler, AZ ) 7802712
11 month Contract

Pay Rate: $50/hr w2

Work with a team of engineers to develop electromagnetic models to capture electromagnetic environment effects (E3)including the prediction of pin level transients. Work within a cross functional team to leverage inputs from CAD, subsystems and systems engineering to develop a baseline electromagnetic model and increment as the system design evolves to capture E3 effects. Updates to the model may include general design changes or the evaluation of potential mitigation approaches. Responsible for model validation through the selection of hardware sets which may be components, subsystems or a combination of them. Includes the development of test plans for the evaluation of those hardware sets with demonstration of model validation though appropriate comparisons between the model and measurements. Travel of up to 25% of the time may be required.

Job Snapshot: Must haves:
Experience with electromagnetic environment effects (E3). On the resume that may show up as intra-system electromagnetic compatibility (EMC), Subsystem and equipment electromagnetic interference (EMI), Lightning,…
Aerospace experience (rocket (launch) or satellite systems)
Active Secret Clearance (or cleared within the past year)
 
Job Number: 7802712
Job Location: Chandler, AZ
Rate: 50
Per Diem: Yes
Overtime: yes
Duration: 11 month
Start Date: ASAP
Input Date: 01/19/2018
Firm Name: TALENTPRO CONSULTING
Attention: tim
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X101
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer III ( New Church , VA ) 7043984, Antares Spacelift

Description:
Electrical Engineer III ( New Church , VA ) 7043984
12 Month Contract

Pay rate: $50 - 55/hr w2

Integration & Test Electrical Engineer will support the Antares Spacelift Program. The Antares Program launches spacelift vehicles out of Wallops, VA, to delivery supplies and scientific equipment to the Space Station.

The Integration & Test Engineer will manage assembly, integration, and test of space launch vehicle flight hardware at the Wallops launch site. Specific duties include hands-on electrical integration of flight hardware, developing/maintaining processes and procedures for vehicle assembly and vehicle testing, hands-on electrical testing of flight hardware, and documenting and pursuing root cause of discrepancies found with hardware.

• Bachelors Degree (BS) in Electrical Engineering • 10 years of electrical hands-on integration & test or related experience is required
• Experience with rocket systems is required
• Experience managing/mentoring less experienced electrical engineers
• Ability to work in a fast pace team environment and multi-task
• Strong written and verbal communication skills • Ability to solve problems • Travel availability 5%
 
Job Number: 7043984
Job Location: New Church, VA
Rate: Open
Per Diem: Split
Overtime: Yes
Duration: 12 Month
Start Date: ASAP
Input Date: 01/19/2018
Firm Name: TALENTPRO CONSULTING
Attention: Tim
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X101
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

Electrical Engineers

Description:
Vehicle systems integration
 
Job Location: OH/MI/IN
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: jmac@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Harness Installation Engineer-Special Missions

Description:
UNIQUE SKILLS
Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project. Aerospace experience is required. Knowledge of Catia V5 is required. Candidate must be able to design wire harness assemblies and installations utilizing the Catia V5 Electrical and Sheet Metal Work Benches. Must have intimate knowledge of an ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements, while meeting all installation and maintainability requirements. Candidate must possess knowledge of regulatory guidance material relative to aircraft harness design. Excellent verbal and written communication skills, and computer skills (Catia V5, Catia V4, PC/MS Office) are required.

JOB DESCRIPTION
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs. in the specific technical discipline or 10 yrs. broad engineering experience in several technical disciplines with Bachelors, or 3 yrs. in the specific technical discipline with Masters, or 1 yr. in the specific technical discipline with PhD. Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Client products and services

PRINCIPAL DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

ADDITIONAL FUNCTIONS
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned
 
Job Number: 17-783-115282
Job Location: Southeast
Rate: $58.00 to $63.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 01/29/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

Electrical Harness Installation Engineer-Special Missions

Description:
Electrical Harness Installation Engineer-Special Missions
Savannah, GA
Rate: $58-$63

Unique Skills:

Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project. Aerospace experience is required. Knowledge of Catia V5 is required. Candidate must be able to design wire harness assemblies and installations utilizing the Catia V5 Electrical and Sheet Metal Work Benches. Must have intimate knowledge of an ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements, while meeting all installation and maintainability requirements. Candidate must possess knowledge of regulatory guidance material relative to aircraft harness design. Excellent verbal and written communication skills, and computer skills (Catia V5, Catia V4, PC/MS Office) are required.

Job description:

Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Position Purpose:

Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

Principal Duties and Responsibilities:
Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned
 
Job Number: 7876
Job Location: Savannah, GA
Rate: $58-$63
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 02/19/2018
Firm Name: INCONEN CORPORATION
Attention: Cathy O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: cathy@inconen.com
Website: www.inconen.com

Electrical Harness Installation Engineering Contractor

Description:
PDS Tech is seeking an Electrical Harness Installation Engineering Contractor  for an open position in Savannah, GA.
In your role, you will:

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of products and services

Principal Duties and Responsibilities: Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned



Education/Experience:
  • Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

 

Other Requirements:

1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 



Unique Skills:



Must have In depth knowledge of electrical harness installation and design guidance documentation (AC 43.13B, SAE AS50881, AC1701-1)
In-depth knowledge of FAR 25 sub part H (EWIS) design requirements
Knowledge of EWIS component qualification requirements and documentation (EIA 364, MIL-DTL-38999, MIL-DTL-50151)
Extensive knowledge of EWIS component selection criteria; experience with Mentor Graphics Capital Harness System (CHS) 


POC: Clyde (813) 426-9917 or ccallwood@pdstech.com

 
 
Job Number: 1710069290
Job Location: Savannah, GA
Per Diem: No
Duration: 6 months
Input Date: 02/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Clyde Callwood
Address: 3922 COCONUT PALM DR STE 100
City, State: TAMPA, FL 33601
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002K38fAAC&URLSource=cjhunter

Electrical Harness installation Engineer

Description:
PDS is seeking an Equipment and Furnishings Engineer for an open position in Savannah, GA.


Unique Skills:



 Aerospace experience is required. Knowledge of Catia V5 is required. Candidate must be able to design wire harness assemblies and installations utilizing the Catia V5 Electrical and Sheet Metal Work Benches. Must have intimate knowledge of an ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements, while meeting all installation and maintainability requirements. Candidate must possess knowledge of regulatory guidance material relative to aircraft harness design. Excellent verbal and written communication skills, and computer skills (Catia V5, Catia V4, PC/MS Office) are required.



Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of  products and services

Principal Duties and Responsibilities:
Essential Functions
:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

 Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned



 

Education and Experience Requirements:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.



Other Requirements:

1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline


 
Job Number: 1710073229
Job Location: Savannah, GA
Duration: 6 months
Input Date: 02/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Jyotsna Sivan
Address: 900 CIRCLE 75 PKWY SE STE 600
City, State: ATLANTA, GA 30339
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023FlGAAU&URLSource=cjhunter

Electrical PM&P Engineer 4

Description:
** Secret Clearance Required to Start **

Electrical Parts Materials & Processes (PM&P) Engineer

The Strategic Missile & Information Systems Parts Materials & Processes (PM&P) team is a Specialty Engineering function which provides expertise in EEE, mechanical, metallic and non-metallic parts, materials and related processes as well as survivability. The PM&P subject matter experts are responsible for working with program designers, IPTs and subcontractors to select parts, materials and processes that meet program designated PM&P requirements along with supporting part testing, failure analysis and mitigation development as well as performing supplier compliance assessments and development of all required plans. Additionally, the subject matter experts will support all Parts, Materials, & Processes Control Board (PMPCB) related functions including reviewing of Non-Standard Part Approval Requests and relevant data, PMPCB working groups and board meetings and interfacing with both the customer and subcontractors in support of the PMPCB.
- Field of expertise must be electrical engineering, materials science and/or engineering, physics or equivalent. Applicants must have prior knowledge of military and industry parts and materials specifications, bills of materials, obsolescence, and have coordinated activities with suppliers.
- It is desired that applicants have prior experience working with defense contractors, parts, materials, & processes mission assurance plans. Some working knowledge of ionizing radiation effects and testing is also preferred.

Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.
 
Job Number: 372767
Job Location: Huntsville, AL
Rate: TBD
Duration: 6 - months
Start Date: ASAP
Input Date: 02/23/2018
Firm Name: CTS INTERNATIONAL
Address: 11100 NE 8TH ST STE 800
City, State: BELLEVUE, WA 98004
Phone: 425/646-2688
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com

Electrical PM&P Engineer 5

Description:
**Interim Secret Clearance required to start**

This position will be responsible for reviewing electromechanical, electromagnetic and electrical (EEE) parts against the Parts, Materials and Processes (PMP) program requirements for applicability in the Redesigned Kill Vehicle. Reviews will include assessment of the part for the design, reviewing test data including but not limited to DPA, PIND, etc.. and reviewing failure analysis data if applicable. Additionally, supplier compliance assessments will be performed on mission critical suppliers.

Coordinates definition of complex requirements for materials, parts and processes used in the manufacture of products. Establishes standards for specifications and other documents to manage the deployment of materials, parts and processes. Represents the Company on technical committees to develop and revise industry standards. Promotes standardization across the Company. Leads evaluation of emerging technologies for potential application to business needs. Establishes standards to qualify new materials, parts and processes to meet requirements. Leads integration of new technologies. Reviews and approves test and audit programs to qualify suppliers to applicable requirements. Coordinates complex analysis to determine reasons for failures of materials, parts or processes. Coordinates broadly based corrective and preventive actions. Leads design, development and qualification of sophisticated computer and production systems to satisfy user requirements. Works under consultative direction.
Bachelor's degree with 14 or more years' experience, Master's degreee with 12 or more years' experience or PhD with 9 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.
 
Job Number: 372817
Job Location: Huntsville, AL
Rate: TBD
Duration: 3 - months
Start Date: ASAP
Input Date: 02/23/2018
Firm Name: CTS INTERNATIONAL
Address: 11100 NE 8TH ST STE 800
City, State: BELLEVUE, WA 98004
Phone: 425/646-2688
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Power System Engineer

Description:
• System Certification Requirements: Cert Plan, Flight Test Plan, Flight Test Report, Qual Test Report, Lab test report, Testing requirements/Flight Clearance and or SOF Requirements, development testing
• Hardware Qualification: Plans, procedures, Reports, conformity, ATP & Outline Drawings
• Software Certification: Experience reviewing PSAC, CIA, SAS.
• Experience in software V&V.

Required Experience in the following:
• Electrical Power Generation, control and indicating
• Secondary Power Distribution, control and indicating
• Solid State Electrical Power.

Desired Experience in the following:
• Working Knowledge ARP4754 and CFR 25
• Project Management

Skills/Experience:
• Configuration change management
 
Job Number: 24-174
Job Location: Savannah, GA
Rate: $58 - $63
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 02/06/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Power-Loads Engineering Contractor - Special Missions

Description:
UNIQUE SKILLS
Required Experience in the following:
• Electrical Power Generation, control and indicating
• Power Distribution, control and indicating
• Electrical Load Analysis

JOB DESCRIPTION
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs. in the specific technical discipline or 10 yrs. broad engineering experience in several technical disciplines with Bachelors, or 3 yrs. in the specific technical discipline with Masters, or 1 yr. in the specific technical discipline with PhD. Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of client products and services

PRINCIPAL DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

ADDITIONAL FUNCTIONS
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

OTHER REQUIREMENTS
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
Desired Experience in the following:
• Working Knowledge ARP4754 and CFR 25
• Project Management Skills/Experience
• Configuration change management
 
Job Number: 17-742-103561
Job Location: Southeast
Rate: $58.00 to $63.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 12/20/2017
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

Electrical Sub-Assembler 1

Description:
PDS Tech, Inc is seeking a candidate for the Electricak Sub-Assembler 1 position located in McClellan, CA.  
Builds up and assembles units in the production of light rail vehicles, locomotives and coaches such as, but not limited to, roofs, cable harnesses, mounts parts, electrical racks and panels, including air supply racks and piping assemblies. 
Connects wires between individual component leads and other components, connectors, terminals, and contact points. 
Makes electrical wire terminations. 
Cuts wire to specified lengths and routes, combs, twists, wraps, ties, and attaches wire to terminal points. 
Disassembles, modifies, reworks, refurbishes, reassembles as required. 
Performs tasks that require knowledge of a combination of processes, operations and equipment. 
Duties may consist of, but not limited to, working from production blueprints, wiring diagrams, parts lists, wire lists, sketches and verbal instructions to produce electrical or Electro-Mechanical subassemblies. 
Frequently required to use fine motor skills, assembling some small parts with excellent dexterity. 
Ability to sit at a workstation for extended periods. 
Identifies and reports problems to Group Lead or Manager. 
Uses hand and power shop tools. Certification of some tools and equipment may be required, such as but not limited to crane and forklift operations. 
Able to routinely interact with other employees from supporting functions. 
Meet internal Company standards for quality and workmanship. 
Expected to contribute and maintain conditions that will ensure a healthy and safe working environment. 
May be required to work overtime, weekends, and/or different shifts as necessary to meet business critical requirements. 
Must be able to work in a fast-paced environment. 
Cross training will be required to cover business needs. 
Other duties as assigned


 
Job Number: 1710075524
Job Location: Mcclellan, CA
Duration: 7 months
Input Date: 02/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Lea Salmo
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023LauAAE&URLSource=cjhunter

Electrical Systems -- Power Generation

Description:
Global 7000/8000

Job location: Toronto, Ontario Canada

Paid Travel
Great Hourly Rates
Direct Deposit
Per Diem
Tax Benefits
Healthcare Options
 
Job Location: Canada
Input Date: 03/27/2017
Firm Name: NORAMTEC CONSULTANTS AMERICAS INC
Attention: Erika
Address: 150 RESEARCH BLVD
City, State: ROCHESTER, NY 14623
Phone: 585/441-9800 x106
Email: erika.legrand@noramtecna.com
Website: www.noramtec.com

Electrical Systems Engineer

Description:
Unique Skills:
• Avionics System Integration Experience Require, Honeywell Epic System Experience Preferred

Position Purpose:
• Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of products and services

Education and Experience Requirements:
• Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Essential Functions:
• Contributes to planning, developing and coordinating of important engineering projects
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
• Acts as liaison with representatives outside of the assigned group/area
• Actively works to improve daily processes and ensures all work meets customer requirements
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
• Performs other duties as assigned
• Advanced degree in engineering related field preferred
• The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 24-215
Job Location: Savannah, GA
Rate: $58 - $63
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 02/22/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Email: matt@precisionpersonnel.com
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Systems Engineer

Description:
Electrical Systems Engineer

Location: Savannah, GA
Pay Rate: $58/hr - $63/hr
Duration: Long Term W2 Contract
Shift: First

Unique Skills:
-Avionics System Integration Experience Required
-Honeywell Epic System Experience Preferred

Education and Experience Requirements:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

Principal Duties and Responsibilities/Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 8227
Job Location: Savannah, GA
Rate: 58.00-63.00
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 02/19/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Electrical Systems Engineer

Description:
Electrical Systems Engineer

Location: Savannah, GA
Pay Rate: $58/hr - $63/hr
Duration: Long Term Contract
Shift: First

Unique Skills:
Aircraft power / electrical / avionic systems design, integration and implementation. (design, certification and system support)

Job description:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

Principal Duties and Responsibilities/Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 7677
Job Location: Savannah, GA
Rate: 58.00-63.00
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 02/19/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: rex@inconen.com
Website: www.inconen.com

Electrical Systems Engineer

Description:
AutoCAD, cabin management systems, in-flight entertainment

-Holiday Pay
-Medical
-Dental
-Vision
-Short-Term Disability
-Direct Deposit
-401(k) Immediate Enrollment
-Annual Bonus
-Referrals
-Personal Communications
 
Input Date: 01/23/2017
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545, 817/354-5555
800 Phone: 866/758-2494
Email: resumes@agentetech.com
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Technical Designer

Description:
EE Technical Designer

Location: Tukwila, WA
Duration: 12 Months

Skill Code: 65L-Wiring Installation Design

Description:
Serves as the subject matter expert for the development, maintenance and release of electrical/mechanical drawings, systems designs or engineering documentation and data by applying Company, industry and governmental standards for multiple customers. Proposes innovative solutions for emergent technical issues. Uses design tools to document and maintain configuration control of designs. Manages, creates, develops and maintains highly complex or specialized systems designs by preparing design layouts, modifying existing designs and integrating systems elements. Directs validation of complex engineering system design and functionality. Leads the process for product installation designs and part designs ranging from simple to complex. Coordinates activities and products with cross-functional groups, internal partners and external suppliers. Reviews and assigns work to others. Works under consultative direction.

Education / Experience:
AA degree in related discipline and typically 9 or more years of related experience or an equivalent combination of education and experience.
 
Job Number: 17-20805
Job Location: Tukwila, WA
Duration: 12 Months
Input Date: 12/21/2017
Firm Name: ICONMA LLC
Attention: Robin
Address: 1201 PACIFIC AVE STE 600
City, State: TACOMA, WA 98402
Phone: 253/213-2012
Website: www.iconma.com

Electrical Technician

Description:
One year in length
Maximum Hourly pay rate $18.00
Tests and troubleshoots electronic products using standard and specialized test equipment. 

1. Troubleshoots electronic products to sub-assembly and component level utilizing schematics and standard troubleshooting practices and procedures 
2. Sets up test equipment and tests electronic products using established test procedures and schematics
3. Provides technical guidance to assemblers and re-work assemblers 
4. Performs cross functional tasks within fairly similar situations resulting in standardized but not identical outcomes

5. Knowledge of the operation and use of electronic production test equipment and hand assembly tools used in a high tech surface mount & through-hole technology manufacturing and production environment
6. Knowledge of advanced electronic test and troubleshooting techniques to component level.
7. Uses product test and measurement equipment, digital/analog voltmeters, oscilloscopes, hi-pot meters, power supplies, and automatic and standard test equipment, etc.
8. Recommends and/or proposes process improvements 
8. Ensures that all relevant quality information/feedback is provided 
10. Utilizes written or visual instructions involving use of quantitative information from specifications, schematics, graphs, pictures, gages, etc.
11. Provides written and/or oral communications concerning a variety of situations following test, troubleshooting, examinations, etc.
12. Keeps workstation, tools and equipment in a neat and orderly manner 
13. Understands and complies with all Company, safety rules and regulations

Requirements/Knowledge: 

v Education Required:
o Associate degree in Electronics (2 year) or certified program (18 mos.) plus 1 year of experience

v Experience 
o 1-3 years of electronics related experience

v Skill Level Required: 
o Skills required in maintaining close specifications using tools & gages, schematics and a variety of electronic equipment 

o Should have a high level of electrical and mechanical aptitude and analytical skills
o Ability to interpret drawing and specifications
o Basic computer skills
o Knowledge of manufacturing processes and how to effectively troubleshoot problems
o Should possess dexterity skills, good hand & eye coordination 
o Willing and able to take and pass basic electronics test 

Desired Qualifications:

v Past experience in a manufacturing environment
v Past experience in a self-directed teaming environment
v Lean manufacturing knowledge
v Understanding of IPC-A-610 standards
 

 
Job Number: 1710063131
Job Location: Bohemia, NY
Duration: 12 months
Input Date: 02/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Eric Khassanov
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002G9j8AAC&URLSource=cjhunter

Electrical Wiring Designer

Description:
Hiring in multiple locations

Email your resume or apply online

Benefits Available
- long term contracts
- top per diem rates
- direct deposit
- referral bonuses
- 401(k) program
 
Input Date: 05/09/2017
Firm Name: NESC STAFFING
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
800 Phone: 800/562-3463
Email: lokeefe@nesc.com
Website: www.nesc.com

Electrical/Aircraft Cabin Interiors & Systems Engineering Contractor

Description:
Electrical/Aircraft Cabin Interiors & Systems Engineer

Location: Savannah, GA
Pay Rate: $58/hr - $63/hr
Duration: Long Term Contract
Shift: First

Unique Skills:
Ideal Candidates will have electrical engineering experience with Aircraft Cabin Interiors and Systems to include but not limited to:
- Cabin Management System
- Cabin Entertainment System
- Cabin Lighting
- Cabin Switch Controls
- Telephone System
- Satellite communications
- Water System
- Waste System
- EWIS
- Cabin interior monuments
- Seats

Education:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area.

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 7428
Job Location: Savannah, GA
Rate: $58-$63
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 02/19/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: rex@inconen.com
Website: www.inconen.com

Electro-Mechanical Design Engineer

Description:
Electro-Mechanical Design Engineer
PDS is looking for experienced Electro-Mechanical Engineers in the Phoenix area
Duties
Electro-Mechanical Design Engineer  Individual will be responsible for the hardware development for missile, satellite  and / or fire control electronics and general packaging support. Activity will require: 

Cross functional coordination to complete hardware design effort to support hardware integration for the designed weapon system. 

Research, development and design of components, equipment and networks for military applications.

Basic Qualifications

- Must be able to obtain a security clearance 
- Candidate must have a Bachelor’s degree from an accredited college in a related discipline with a minimum 3.0 GPA
- 3D modeling tools (example would be Pro-E/CREO, Catia, Solidworks or similar)

Desired skills

- Working knowledge of harness design and development.
- Working knowledge of printed wiring board and surface mount technologies is desired.
- Exposure to, or experience with, Pro/Cable for harness development and Cadence for PWB design is a plus.
- Working knowledge of military hardware specifications is desired.
- Desired design experience includes chassis, electro-mechanical assembly, electrical cable and/or network design. Able to interpret electrical schematics for harness development a plus.

 

 



 
Job Number: 1710065209
Job Location: Phoenix, AZ
Duration: 12 months
Input Date: 02/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Terry Brooke
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i500000021WJmAAM&URLSource=cjhunter

Electro-Mechanical Design Engineer

Description:
Electro-Mechanical Design Engineer
PDS is looking for experienced Electro-Mechanical Engineers in the San Diego area
Duties
Electro-Mechanical Design Engineer  Individual will be responsible for the hardware development for missile, satellite  and / or fire control electronics and general packaging support. Activity will require: 

Cross functional coordination to complete hardware design effort to support hardware integration for the designed weapon system. 

Research, development and design of components, equipment and networks for military applications.

Basic Qualifications

- Must be able to obtain a security clearance 
- Candidate must have a Bachelor’s degree from an accredited college in a related discipline with a minimum 3.0 GPA
- 3D modeling tools (example would be Pro-E/CREO, Catia, Solidworks or similar)

Desired skills

- Working knowledge of harness design and development.
- Working knowledge of printed wiring board and surface mount technologies is desired.
- Exposure to, or experience with, Pro/Cable for harness development and Cadence for PWB design is a plus.
- Working knowledge of military hardware specifications is desired.
- Desired design experience includes chassis, electro-mechanical assembly, electrical cable and/or network design. Able to interpret electrical schematics for harness development a plus.

 

 



 
Job Number: 1710065205
Job Location: San Diego, CA
Duration: 12 months
Input Date: 02/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Karla Pelonis
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i500000021WJIAA2&URLSource=cjhunter

Electro-Mechanical Design Engineer

Description:
Electro-Mechanical Design Engineer
PDS is looking for experienced Electro-Mechanical Engineers in the San Jose area
Duties
Electro-Mechanical Design Engineer  Individual will be responsible for the hardware development for missile, satellite  and / or fire control electronics and general packaging support. Activity will require: 

Cross functional coordination to complete hardware design effort to support hardware integration for the designed weapon system. 

Research, development and design of components, equipment and networks for military applications.

Basic Qualifications

- Must be able to obtain a security clearance 
- Candidate must have a Bachelor’s degree from an accredited college in a related discipline with a minimum 3.0 GPA
- 3D modeling tools (example would be Pro-E/CREO, Catia, Solidworks or similar)

Desired skills

- Working knowledge of harness design and development.
- Working knowledge of printed wiring board and surface mount technologies is desired.
- Exposure to, or experience with, Pro/Cable for harness development and Cadence for PWB design is a plus.
- Working knowledge of military hardware specifications is desired.
- Desired design experience includes chassis, electro-mechanical assembly, electrical cable and/or network design. Able to interpret electrical schematics for harness development a plus.

 

 



 
Job Number: 1710065206
Job Location: San Jose, CA
Duration: 12 months
Input Date: 02/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Karla Pelonis
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i500000021WJXAA2&URLSource=cjhunter

Electro-Mechanical Design Engineer

Description:
Electro-Mechanical Design Engineer
PDS is looking for experienced Electro-Mechanical Engineers in the Houston area
Duties
Electro-Mechanical Design Engineer  Individual will be responsible for the hardware development for missile, satellite  and / or fire control electronics and general packaging support. Activity will require: 

Cross functional coordination to complete hardware design effort to support hardware integration for the designed weapon system. 

Research, development and design of components, equipment and networks for military applications.

Basic Qualifications

- Must be able to obtain a security clearance 
- Candidate must have a Bachelor’s degree from an accredited college in a related discipline with a minimum 3.0 GPA
- 3D modeling tools (example would be Pro-E/CREO, Catia, Solidworks or similar)

Desired skills

- Working knowledge of harness design and development.
- Working knowledge of printed wiring board and surface mount technologies is desired.
- Exposure to, or experience with, Pro/Cable for harness development and Cadence for PWB design is a plus.
- Working knowledge of military hardware specifications is desired.
- Desired design experience includes chassis, electro-mechanical assembly, electrical cable and/or network design. Able to interpret electrical schematics for harness development a plus.

 

 



 
Job Number: 1710065208
Job Location: Houston, TX
Duration: 12 months
Input Date: 02/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Terry Brooke
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i500000021WJhAAM&URLSource=cjhunter

Electro-Mechanical Design Engineer

Description:
Electro-Mechanical Design Engineer
PDS is looking for experienced Electro-Mechanical Engineers in the Los Angeles area
Duties
Electro-Mechanical Design Engineer  Individual will be responsible for the hardware development for missile, satellite  and / or fire control electronics and general packaging support. Activity will require: 

Cross functional coordination to complete hardware design effort to support hardware integration for the designed weapon system. 

Research, development and design of components, equipment and networks for military applications.

Basic Qualifications

- Must be able to obtain a security clearance 
- Candidate must have a Bachelor’s degree from an accredited college in a related discipline with a minimum 3.0 GPA
- 3D modeling tools (example would be Pro-E/CREO, Catia, Solidworks or similar)

Desired skills

- Working knowledge of harness design and development.
- Working knowledge of printed wiring board and surface mount technologies is desired.
- Exposure to, or experience with, Pro/Cable for harness development and Cadence for PWB design is a plus.
- Working knowledge of military hardware specifications is desired.
- Desired design experience includes chassis, electro-mechanical assembly, electrical cable and/or network design. Able to interpret electrical schematics for harness development a plus.

 

 



 
Job Number: 1710065207
Job Location: Los Angeles, CA
Duration: 12 months
Input Date: 02/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Karla Pelonis
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i500000021WJcAAM&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electromechanical Design Engineer

Description:
Electromechanical Design Engineer

Location: Orlando, FL
Pay Rate: DOE ($45/hr - $55/hr)
Duration: 1 year W2 contract
Shift: not specified
**MUST be a U.S. CITIZEN**

Duties:
-An Electromechanical Design Engineer is responsible for the design, documentation and production floor support of hardware (missile electronics, missile electrical cabling, airborne support equipment, ground support equipment and test sets).
-Additional duties include investigation of discrepant hardware and test anomalies.

Skills Required:
-Must have at minimum a Bachelor of Science degree in an Engineering related discipline.
-Design experience with electrical cables, test sets, breakout boxes, 19” support equipment rack design
-Proficiency with Creo Parametric 2.0 Cabling and Intralink.
-Proficiency with ASME Y14.5M-1994 and generating detailed engineering drawings.
-Proficiency with reading schematics for electrical cable assemblies in order to define and select connectors, backshells, splices, wiring, etc.
-Basic computer skills and a working knowledge of Microsoft Office products (Word and Excel)
-Compliance to quality and safety policies at all times!
-Must be a US Citizen
-Physical Requirements – This work requires delicate handling, reaching, light lifting and may require a combination of sitting and standing as well as walking between test locations and occasional use of small step-ladders.
DESIGN ENGINEER CREO CABLING ASME/ANSI READING SCHEMATICS

Desired:
-Experience with design of flexible and semi-rigid RF cables

Education:
-Must have at minimum a Bachelor of Science degree in an Engineering related discipline.
 
Job Number: 8364
Job Location: Orlando, FL
Rate: 45-55
Per Diem: Split Possible
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 01/09/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Electronic Troubleshooter

Description:
Tests and troubleshoots electronic products using standard and specialized test equipment. 

1. Troubleshoots electronic products to sub-assembly and component level utilizing schematics and standard troubleshooting practices and procedures 
2. Sets up test equipment and tests electronic products using established test procedures and schematics
3. Provides technical guidance to assemblers and re-work assemblers 
4. Performs cross functional tasks within fairly similar situations resulting in standardized but not identical outcomes

5. Knowledge of the operation and use of electronic production test equipment and hand assembly tools used in a high tech surface mount & through-hole technology manufacturing and production environment
6. Knowledge of advanced electronic test and troubleshooting techniques to component level.
7. Uses product test and measurement equipment, digital/analog voltmeters, oscilloscopes, hi-pot meters, power supplies, and automatic and standard test equipment, etc.
8. Recommends and/or proposes process improvements 
8. Ensures that all relevant quality information/feedback is provided 
10. Utilizes written or visual instructions involving use of quantitative information from specifications, schematics, graphs, pictures, gages, etc.
11. Provides written and/or oral communications concerning a variety of situations following test, troubleshooting, examinations, etc.
12. Keeps workstation, tools and equipment in a neat and orderly manner 
13. Understands and complies with all Company, safety rules and regulations

Requirements/Knowledge: 

v Education Required:
o Associate degree in Electronics (2 year) or certified program (18 mos.) plus 1 year of experience

v Experience 
o 1-3 years of electronics related experience

v Skill Level Required: 
o Skills required in maintaining close specifications using tools & gages, schematics and a variety of electronic equipment 

o Should have a high level of electrical and mechanical aptitude and analytical skills
o Ability to interpret drawing and specifications
o Basic computer skills
o Knowledge of manufacturing processes and how to effectively troubleshoot problems
o Should possess dexterity skills, good hand & eye coordination 
o Willing and able to take and pass basic electronics test 

Desired Qualifications:

v Past experience in a manufacturing environment
v Past experience in a self-directed teaming environment
v Lean manufacturing knowledge
v Understanding of IPC-A-610 standards
 
Tests and troubleshoots electronic products using standard and specialized test equipment. 

1. Troubleshoots electronic products to sub-assembly and component level utilizing schematics and standard troubleshooting practices and procedures 
2. Sets up test equipment and tests electronic products using established test procedures and schematics
3. Provides technical guidance to assemblers and re-work assemblers 
4. Performs cross functional tasks within fairly similar situations resulting in standardized but not identical outcomes

5. Knowledge of the operation and use of electronic production test equipment and hand assembly tools used in a high tech surface mount & through-hole technology manufacturing and production environment
6. Knowledge of advanced electronic test and troubleshooting techniques to component level.
7. Uses product test and measurement equipment, digital/analog voltmeters, oscilloscopes, hi-pot meters, power supplies, and automatic and standard test equipment, etc.
8. Recommends and/or proposes process improvements 
8. Ensures that all relevant quality information/feedback is provided 
10. Utilizes written or visual instructions involving use of quantitative information from specifications, schematics, graphs, pictures, gages, etc.
11. Provides written and/or oral communications concerning a variety of situations following test, troubleshooting, examinations, etc.
12. Keeps workstation, tools and equipment in a neat and orderly manner 
13. Understands and complies with all Company, safety rules and regulations

Requirements/Knowledge: 

v Education Required:
o Associate degree in Electronics (2 year) or certified program (18 mos.) plus 1 year of experience

v Experience 
o 1-3 years of electronics related experience

v Skill Level Required: 
o Skills required in maintaining close specifications using tools & gages, schematics and a variety of electronic equipment 

o Should have a high level of electrical and mechanical aptitude and analytical skills
o Ability to interpret drawing and specifications
o Basic computer skills
o Knowledge of manufacturing processes and how to effectively troubleshoot problems
o Should possess dexterity skills, good hand & eye coordination 
o Willing and able to take and pass basic electronics test 

Desired Qualifications:

v Past experience in a manufacturing environment
v Past experience in a self-directed teaming environment
v Lean manufacturing knowledge
v Understanding of IPC-A-610 standards
 
 
Job Number: 1710066458
Job Location: Bohemia, NY
Duration: 12 months
Input Date: 02/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Eric Khassanov
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000021ioWAAQ&URLSource=cjhunter

Electronics Assembler (6) - RI

Description:
Chipton-Ross is seeking an Electronics Assembler (6) for an opening in Ashaway, RI.

Under the direction and guidance of the Production Supervisor, the Electronics Assembler, routes, wires, assembles and installs electrical and electronic components in military sonar systems and commercial equipment according to specifications, using fixtures and jigs, hand tools and equipment. Reads work instructions, drawings and specifications to determine assembly methods. Solders surface mount components to printed wiring using microscopes and hand soldering devices.

RESPONSIBILITIES:
Essential Functions:
1. Responsible for assembling and handling products, equipment and materials per engineering and company's quality system procedures.
2. Perform program specific tasks as required to ensure compliance to individual program requirements.
3. Assemble printed wiring boards from engineering drawings and sketches using surface mount hardware, soldering irons and microscope.
4. Cut wire to specified lengths, using wire cutters.
5. Cut plastic sleeves and slip sleeves over wire ends to insulate connections.
6. Crimp terminal eyelets and lugs to wire ends, using hand or machine crimping device.
7. Route, comb, twist, wrap, tie and attach wire to terminal points, according to layout, using soldering iron and hand tools.
8. Connect wiring to accessories, such as connectors, circuit breakers, plugs and switches and install accessory assemblies in electrical or electronic units, using soldering iron and hand tools.
9. Conducts functional and continuity tests of electrical assemblies, components, wire harness and plugs, using ohmmeter, test lights and other electrical testing instruments.
10. Pot or encapsulate electrical and electronic components and assemblies.
11. Follow company procedures for corrective action. Notify Production supervisor if a defect is identified to obtain guidance and assistance in resolving the problem.
12. Responsible for following procedures for product assembly/fabrication, equipment operation and sound safety requirements as documented in the company's quality system.
13. Promote cordial relationships and foster and maintain a favorable business profile with customers, suppliers, co-workers, industry and professional associations, government agencies and the local community.

REQUIRED EXPERIENCE:
Certificates and Licenses Required:
-Valid state drivers license.
Knowledge, Skills and Abilities:
1. Ability to speak, read and write the English language.
2. Ability read and interpret work instructions, engineering drawings and sketches and specifications to determine assembly methods for electrical and electronic components.
3. Ability to follow instructions; ability to mentally visualize and comprehend all aspects of assembling equipment or tooling problem and understand the interrelationships of factors affecting a situation.
4. Ability to comprehend and apply modern fabrication and assembly techniques and machine shop practices and techniques.
5. Ability to communicate effectively orally; good interpersonal skills; pays attention to detail; and ability to meet deadlines.

ADDITIONAL EXPERIENCE:
1. Ability to speak, read and write the English language.
2. Ability read and interpret work instructions, engineering drawings and sketches and specifications to determine assembly methods for electrical and electronic components.
3. Ability to follow instructions; ability to mentally visualize and comprehend all aspects of assembling equipment or tooling problem and understand the interrelationships of factors affecting a situation.
4. Ability to comprehend and apply modern fabrication and assembly techniques and machine shop practices and techniques.
5. Ability to communicate effectively orally; good interpersonal skills; pays attention to detail; and ability to meet deadlines.

Physical Demands:
1. Exerts up to 20 to 50 lbs. of force occasionally, or up to 10 to 25 lbs. of force frequently, or up to 10 lbs. of force constantly to move objects.
2. Excellent manual dexterity is required to operate the technical instruments and equipment appropriate to assembly.
3. Employee regularly sits while using upper body movements including arms, hands and fingers constantly in handling tools and equipment necessary to assemble and install electrical and electronics components in military sonar systems and commercial equipment. Also, working on computers and other office equipment.
4. Employee occasionally stands and/or walks and reaches with hands and arms in moving tools, equipment and/or products.

Other Work Conditions and Requirements:
1. Employee works in a quiet to moderately noisy environment.
Network Analysis:
1. Directly provides support to the Engineering and Operations Departments.
Scope information:

PREFERRED EXPERIENCE:
Experience preferred in related field, but not necessary.


EDUCATION:
Accredited High School Diploma/GED

WORK HOURS:
9/80, Full-Time
 
Job Number: 164681
Job Location: Ashaway, RI
Rate: $15 to $22.00 DOE
Duration: 2 Months
Input Date: 02/23/2018
Firm Name: CHIPTON ROSS
Attention: Christian Martinez-Salceda
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: cmartinez@chiptonross.com
Website: www.chiptonross.com

Electronics Technician

Description:
Chipton-Ross is seeking a Electronics Technician in Santa Barbara, CA.

Description
Provides engineering hardware fabrication support, troubleshooting, testing and basic Laboratory operations responsibility. These responsibilities will include fabrication of electronic/electrical chassis' and mechanical rack fabrication using development engineering drawings. Candidate must be capable of working independently, discussing technical issues with customers and working with vendors.

Skill/Experience/Education
Mandatory:
Integrated Circuit Layout Technician. SBF is seeking an experienced integrated circuit technician to help advance the state of the art in infrared and visible imager readout integrated circuits (ROICs). Significant experience with physical layout of mixed signal VLSI CMOS transistor level designs is required. The selected candidate will perform silicon layout of analog and digital submicron transistor level designs in support of advanced infrared cameras and imagers. Designs include ultralow noise analog circuit blocks, low power analog to digital conversion, high speed multi GHz data transmission and serializers. MUST HAVE CMOS integrated circuit layout experience.

Desired:
Schematic capture, design verification and simulation.
 
Job Number: 165226
Job Location: Santa Barbara, CA
Rate: $DOE
Duration: 12 months
Input Date: 02/23/2018
Firm Name: CHIPTON ROSS
Attention: Brent Sizemore
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: bsizemore@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer - Level 3

Description:
Embedded Software Engineer - Level 3

Location: Archbald, PA
Pay Rate: DOE ($40/hr - $55/hr)
Duration: 1 year contract
Shift: First, 9/80, OT
Travel: Possible occasional travel to customer or vendor sites
**MUST be a U.S. CITIZEN**
**MUST be ELIGIBLE for a SECRET CLEARANCE – ACTIVE SECRET CLEARANCE PREFERRED**

Description
-Designs, develops, operates, and maintains software and firmware components and computing systems software to be applied to and integrated with engineering, scientific, and manufacturing requirements.
-Applies the appropriate standards, processes, procedures, and tools throughout the system development life cycle to support the generation of such engineering applications and products such as laboratory simulation systems, airplane flight control and display systems, avionics, mechanical and electrical systems, weapons armament, commercial and military aircraft systems, mobile and ground-based defense systems, space systems, and other systems and applications of this nature.
-Interfaces with customers, suppliers, application users, and other technical and support personnel.

Skill/Experience/Education (Mandatory):
- C/C++ programming: (6-8 years' experience required)
-Embedded software: (6-8 years' experience required)
-Hardware/software integration: (4-5 years' experience required)
-Software documentation experience
-Software verification experience
 
Job Number: 7788
Job Location: Archbald, PA
Rate: 40-55
Per Diem: Split Possible
Overtime: Yes
Duration: 1 year
Start Date: ASAP
Input Date: 02/05/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Engineer 3

Description:
Engineer 3

Location: Savannah, GA
Pay Rate: $58/hr - $60/hr
Duration: Long Term Contract
Shift: Not specified

Unique Skills:
-The ideal candidate will perform cabin configuration engineering and will have a background in electro-mechanical design and/or integration.
-Understanding of aircraft mechanical component integration along with basic electrical integration and application is highly preferred.
-Position will generate build list configuration and certification strategy for a complete aircraft cabin interior installation.
-Knowledge of business jet cabin interiors is highly desired.

Education and Experience Requirements:
Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Five (5) yrs in specific technical discipline or ten (10) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

Principle Duties and Responsibilities/Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering related field preferred. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 8162
Job Location: Savannah, GA
Rate: 58-60
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 02/19/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: rex@inconen.com
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer II

Description:
JOB DESCRIPTION
SUMMARY STATEMENT
Applies advanced knowledge of principles, theories and concepts and industry practices and standards related to the design, development, testing, manufacturing, repair and certification of aircraft structures, component parts and related component systems and subsystems for operational aircraft that are consistent with Federal Aviation Administration guidelines.

ESSENTIAL FUNCTIONS AND KEY RESPONSIBILITIES
Develops solutions to a variety of moderate complexity or unusual engineering or technical problems or assignments requiring judgment and ingenuity to work within engineering protocols in the analysis, design and/or repair development of aircraft structures, power plant component parts, mechanical and electrical systems/structures and subsystems for commercial, military, executive, general aviation, or special purpose applications on operational aircraft.

Analyzes and interprets engineering proposals and documentation such as drawings, material and product specifications, structural repair manuals (SRMs), component maintenance manuals (CMMs) and illustrated parts lists (IPLs/IPCs) to develop design and/or repair schemes approaches. Confers with management to clarify or resolve problems.

Designs and develops and/or repairs of structural, power plant and other operational and structural components that are used in operating aircraft. This includes producing or assisting in the production of computer aided drawings and engineering reports.

Develops design and/or repair data packages and obtains FAA approvals through internal and external FAA Designated Engineering Representatives (DERs); troubleshoot failure modes, communicate and interact with customer engineering groups and/or internal personnel for design, development and/or cost effective repair schemes and approvals.

Designs and develops analytical programs concerned with ground or flight testing, or development of acoustic, thermodynamic, or propulsion systems.

Tests models, prototypes, subassemblies, or production items to study and evaluate operational characteristics and effects of stress imposed during actual or simulated operational conditions.

ANCILLARY FUNCTIONS AND RESPONSIBILITIES

Performs other duties as required. These duties may include assignments in job classifications other than the primary assignment.

JOB QUALIFICATIONS
FORMAL EDUCATION, TRAINING, PROFESSIONAL CERTIFICATION AND WORK EXPERIENCE
Experience may be substituted for the formal education and training requirements in this section at the discretion of management. Technical Bachelor level degree in Engineering or the sciences or equivalent and three (3) to six (6) years related experience and/or training; or equivalent combination of education and experience.

LEVEL OF SUPERVISION REQUIRED
Works under general supervision. Sound judgment, completeness and accuracy are expected.

STANDARD JOB REQUIREMENTS
• Must be able to arrive to work on time and attend regularly
• Must be able to fluently read and write the English language, perform basic mathematical calculations and interpret and comprehend company policies, procedures, safety instructions and other like documents.
• Competent in the use of standard software applications such as Microsoft Word and Excel and operate standard office equipment
• Communicate effectively using electronic media and in written and verbal forms
• Above average communication skills, tailoring to technical and non-technical audiences
• Make telephone and direct personal contact with internal and external personnel and make formal presentations to small or large groups.

SPECIAL TRAINING AND BEHAVIORAL COMPETENCIES
The following training requirements and competencies must be met before acceding to this job.
• Safety training applicable to the job and work area.
• Complete the required CLIENT University training for all Stakeholders.
• Comply with The CLIENT Leadership Competencies for Stakeholders.
• Ability and willingness to assist and transfer technical knowledge to less experienced Stakeholders.

PHYSICAL REQUIREMENTS
While performing the duties of this job, the Stakeholder is frequently required to sit and talk and hear. The Stakeholder is occasionally required to stand; walk; reach with hands and arms; and stoop, kneel, crouch, or crawl. The Stakeholder must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, color vision, and ability to adjust focus. Must be able to travel between facilities and operate standard office equipment. Work in excess of eight (8) hours per day and five (5) days per week as required. Must be able to ascend and descend stairs.

WORK ENVIRONMENT
While performing the duties of this job, the Stakeholder is occasionally exposed to moving mechanical parts, fumes or airborne particles, toxic or caustic chemicals, and outside weather conditions. The noise level in the work environment is usually moderate.

MENTAL REQUIREMENTS
Able to work as a team member, highly organized, work well under stress and handle multiple priorities. Must possess interpersonal and communication skills to interact with other people.
 
Job Number: 17-802-13920
Job Location: Midwest
Rate: Mid 70's
Per Diem: No
Overtime: Possible
Duration: Direct
Start Date: ASAP
Input Date: 01/29/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

Engineer Mechanical 3- Secret Clearance

Description:
PDS Tech, Inc. is seeking a candidate for the Engineer Mechanical 3 position located in Sunnyvale, CA. 
  • Position will require selected candidate to maintain drawings of electrical test equipment which includes, but not limited to highbay & TVAC testing configurations, waveguide and cable routing and detail design of test set equipment. 
  •  
    The selected candidate will be responsible for drawing documentation, design updates, working with mechanical and electrical I&T technicians, and QA interaction, parts management, installation and procedure writing and customer interaction. 

  • Selected candidate must be adept at working independently as well as in a collaborative team environment. 
  • Candidate should also possess strong leadership skills, able to communicate well verbally and written, and be attentive to detail. 


  • Basic Qualifications:


  • 5 Years of Related work Experience with a Bachelor of Science Degree in Mechanical Engineering.
  • Active DOD Secret.
  • Knowledge of 3D CAD including drawing generation.


  • Preferred Qualifications:


  • SCI Clearance.
  • Experienced in ProE/CREO.
  • Knowledge with electro-mechanical design/products

 
Job Number: 1710075541
Job Location: Sunnyvale, CA
Duration: 9 months
Input Date: 02/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Phil Press
Address: 370 N WESTLAKE BLVD STE 120
City, State: WESTLAKE VILLAGE, CA 91362
Phone: 805/418-9862
800 Phone: 866/458-4322
Fax Phone: 805/418-9866
Email: cecjwestlake@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023LcqAAE&URLSource=cjhunter

Engineering Design 1/2 (3) - FL - C

Description:
RESPONSIBILTIES:
Designs major components or major portions of a functional system to develop or improve products and facilitate manufacturing operations. Develops basic data and makes preliminary layouts, sketches, and notes necessary to present design proposal. Investigates pertinent design factors such as ease of manufacture, availability of materials and equipment, interchangeability, replace ability, strength-weight efficiency, and contractual specification requirements and cost. Coordinates with other organizations affected by design development. Makes layouts of complex assemblies and details parts of devices, mechanisms, and structures. Checks completed layouts and drawings for clarity, completeness, conformity to standards, procedures, specifications, and accuracy of calculations and dimensioning. Identifies design errors, omissions, and other deficiencies, and recommends revisions and/or improvements in design layout to responsible engineers or designers.
Design Engineer: Work will involve aerospace mechanical, pneumatic, hydraulic, and electrical subsystem test equipment design.

REQUIRED EXPERIENCE:
Strong CAD skills, proficient in MS Office, must be willing to relocate to Palmdale in approx. 1-2 years.
Level 1 (2 positions): 0 Years with Bachelors in Science Mechanical Engineering
Level 2 (1 Position): 2 Years with Bachelors in Science Mechanical Engineering; 0 Years with Masters Mechanical Engineering.
Preferred Qualifications:
Knowledge of test equipment design a plus, knowledge of aerospace subsystems a plus.

EDUCATION:
Bachelors in Science Mechanical Engineering, or Master's degree.

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

HOURS:
9/80 workweek

 
Job Number: 162898
Job Location: Melbourne, FL
Rate: $28 to $40.00 DOE
Duration: 9-12 months
Input Date: 02/23/2018
Firm Name: CHIPTON ROSS
Attention: Melody Mullins
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: mmullins@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Technician

Description:
Our client, a market leader and technology innovator, is seeking talented professionals to deliver cutting edge solutions to their customers. Well-respected, with a global presence, our client consistently offers a powerful and robust portfolio of products, services and solutions that help customers successfully execute their missions in today’s dynamic environment. With unsurpassed engineering, using an open systems approach, our client solves the nation’s most complex challenges while foreseeing future needs.

Engineering Technician
(US Citizenship Required*)
Scottsdale, AZ
2017-5043

Responsibilities:
The Engineering Technician will primarily perform hardware integration and test of highly complex, highly-reliable spaceflight payload electronics. Tasks also include
• Align, test, troubleshoot, analyze data, and technical evaluation of Digital and RF modules.
• Develop and prepare reports and procedure documentation
• Second and/or third shift coverage will be required for most assignments.

Qualifications:
• Required – Active Secret Clearance. Only candidates with an active clearance will be considered.
• Strong background in electrical test techniques.
• High level of understanding of product specifications.
• Proficient in using test equipment such as network analyzers, spectrum analyzers, logic analyzers, oscilloscopes, and signal generators is required.
• Able to read and follow detailed work instructions and/or test procedures.
• Has a solid understanding of the job skills and learns company policies and procedures to complete routine tasks

*US Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
Associate's degree in related discipline or equivalent is required plus a minimum of 3 years of relevant experience

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!


PLEASE APPLY ONLINE HERE: https://careers-moseleytechnical.icims.com/jobs/5043/adv-engineering-tech-2/job?mode=view
 
Job Number: 2017-5043
Job Location: Scottsdale, AZ
Duration: 12 Months
Input Date: 12/27/2017
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Bob Jones
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

Equipment Maintenance Tech

Description:
PDS Tech is seeking Equipment Maintenance Tech located in Tempe,AZ.

Description:

The candidate performs a variety of specialized duties in testing, repair, preventative maintenance and calibration of equipment used in the development, manufacture and test of products
• Three to five years of experience in manufacturing maintenance
• United States citizenship required.
• Ability to obtain and maintain a security clearance.
• Ability to effectively establish rapport and develop effective relationships.
• Requires concentrated attention and a high degree of skill and accuracy.
• Previous Aerospace/Defense industry experience desired.

Responsibility:

• Areas of specialization may include one or more of the following: electrical, mechanical, vacuum, hydraulics, refrigeration, N/C repair and/ or machine tool rebuilding.
• Assists in developing and implementing methods, techniques and procedures for repair and maintenance of equipment. Interprets and uses schematics, drawings and instruction manuals.
• Diagnoses equipment failures.
• Applies applicable theory and principles to check equipment. 
• Performs other duties as assigned.

Education:


• AS Degree in Applied Science or equivalent

Preferred Skills:

• Basic computer skills, Excel, and ability to generate needed Excel reports
• Working knowledge of test/repair technology in area (s) of speciality and engineering principles 
• handling of average weight materials, small tools or operating light weight equipment.
• Safety and Lock out tag out procedures
• Must have strong problem solving and analytical skills
Initiative; Persistence; Integrity; Time Management; Judgment and Decision Making; Effective Communication; Attention to Detail; Adaptability/Flexibility; Effective Problem Solving

 
Job Number: 1710078944
Job Location: Tempe, AZ
Duration: 3 months
Input Date: 02/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Rebecca Burrows
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023VsqAAE&URLSource=cjhunter

Equipment Maintenance Technician (NC)

Description:
Looking for 6 Equipment Maintenance Technician for Kinston

MAINTENANCE-Technician 13.01

Dismantles, moves, assembles, installs, and repairs industrial machinery and equipment according to layout plans, blueprints, drawings, or verbal instructions. Dismantles equipment and machines using hammers, wrenches, crowbars, and other hand tools; moves machinery and equipment using hoists, dollies, rollers, and trucks; assembles and installs equipment such as conveyors and tram rails using hand and power tools; constructs foundations; aligns machines; performs scheduled inspection and maintenance.

Sets up and operates machine tools and fabrication machinery to rework or make new parts. Combined discipline in both Mechanical and Electrical skills sets is preferred, but core skills in either/or will also be strongly considered.

Duties:
1.      Assist higher grade employees in the completion of work or complete work under the direction of a higher grade employee in same job classification, or work plans.
2.      Perform root/cause analysis in support of reliability processes, and collaborate with vendors, engineering, team leader, customer, other crafts and management to solve equipment problems and develop corrective action.
3.      Enter and retrieve data from the CMMS system, and order parts required to accomplish the tasks, (except as relates to inventory, store, record, issue and any other duties related to material support technician.)
4.      Rework and maintain tools of all types and materials. Perform routine minor machine maintenance as part of their daily work duties (e.g., replacing machine filters, changing standard light bulbs on machines and equipment, maintaining lubrication/coolant levels, etc. as related to basic Total Preventative Maintenance duties).
5.      Train other employees in same job classification as requested or required.

In addition, each employee may be asked, on occasion, to complete other duties and responsibilities as required by Client leadership. 

Training and certification will be provided for the additional work when required.

Level B
1.      Use precision alignment and measuring instruments.
2.      Diagnose failures, determine parts and material requirements, and perform repairs as required to resume operation on the following:
CNC equipment
Motive equipment
Precision Pumps
3.      Operate plant equipment to fabricate and repair machine parts.
4.      Finish, scrape, flake, frost and lap to align and level machine beds, ways and related equipment.
5.      Lead, train, team with and plan sequence of work for assigned employees of equal and lower classifications in the Equipment Maintenance Technician Classification.

Requirements:
This is a 6 month contract position. Contractors will be temporarily assisting with bladder inspection, utilizing newly implemented X-Ray inspection.

Looking for contractors for All three shifts
Overtime / weekends
Local talent, preferred but if not found will accept out of state
On site interviews
6 month duration
Computer skills and mechanical

They will be processing bladders through a X-Ray machine looking for defects

FOSTER DESIGN'S BENEFITS:
• Working for a 54-year old company
• Minimum 6 Paid Holidays
• Blue Cross Blue Shield – Group Medical Insurance Plan
• MetLife – Long Term Disability Insurance
• Immediate 401K participation, 1 year 100% vesting schedule, matching employer contribution
• Vacation Pay
• Paid Weekly (Direct Deposit)
 
Job Number: FD-569533NC
Job Location: Kinston, NC
Rate: $33.00/HR
Per Diem: Yes - Possible
Overtime: Yes, as needed
Duration: 6 Months
Start Date: 12/15/2017
Input Date: 02/16/2018
Firm Name: FOSTER DESIGN INC
Attention: Recruiter
Address: 200 W DOUGLAS AVE STE 110
City, State: WICHITA, KS 67202
Phone: 316/832-9700
800 Phone: 800/345-3394
Fax Phone: 316/832-9357
Email: contract@fosterdes.com
Website: www.fosterdes.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
FAST Technician Sr.

Description:
FAST Technician Sr.
Denver, CO
Rate: DOE


Unique Skills:

*** This person will be station in the Denver, Colorado area *** Must be able to pass a DOT medical exam and meet all of the qualifications to operate large vehicles.FAA A & P Certificate, FCC license, or NCAT certification required. Valid Driver's License required. Ability to obtain Passport as international travel is a requirement. Must be available on an on-call basis 24 hours a day 7 days a week, with the ability to be on site or dispatched on the FAST aircraft or vehicle within two hours of the initial contact from Company. Must be able to communicate effectively with the customer, scheduling, FAST flight crews, Tech Ops, business office, vendors, Warranty, Field Service Reps and Hangar Ops. Performs required AOG maintenance and necessary servicing of all aircraft mechanical and avionics systems. Must demonstrate the ability to work independently and consistently to perform assigned maintenance and avionics tasks within the quoted or standard CMP time with little or no supervision.


Education and Experience Requirements:

HS diploma/GED. FAA A & P Certificate, FCC license, or NCAT certification required. Valid Drivers License required. Ability to obtain Passport. 8 years combined experience in inspection, maintenance or servicing of large/mid-size acft to include 2 years experience on Company acft.

Position Purpose:

Independently performs a variety of aircraft modifications and maintenance functions on AOG aircraft on road trips and in the Product Support org. Duties include adv troubleshooting, removal and installations of airframes, landing gear, engine components, electrical components, control systems and any other maintenance requirements to assure conformance to procedures, performances, and test specs on customer live in-service aircraft. Supports the customer in diagnosing and resolving technical problems with the aircraft.

Principal Duties and Responsibilities:

Essential Functions: 1. Must be available on an on-call basis, with the ability to be on site or dispatched on the FAST aircraft within two hours of the initial contact from Company. Must be able to communicate effectively with the customer, scheduling, FAST flight crews, Tech Ops, business office, vendors, Warranty, Field Service Reps and Hangar Ops. Acts as the single point of contact between Company and the customer to correctly relay the aircraft schedule and return to service expectations. 2. Performs required AOG maintenance and necessary servicing of all aircraft mechanical and avionics systems. Must demonstrate the ability to work independently and consistently to perform assigned maintenance and avionics tasks within the quoted or std CMP time with little or no supervision. 3. Complies with adv troubleshooting techniques for all model aircraft with assistance from Tech Ops. 4. Orders and receives all tooling and matls needed to service the AOG aircraft. Arranges the shipment of all core units and tooling back to Company. 5. Coordinates with the Inspection Dept to ensure compliance with internal and FAA inspection and doc requirements. Acts as the delegated Quality rep when assigned on road trips. Properly completes work order sign-offs, logbook entries, shift turnovers, expense reports and all other paper work in a timely manner. Ensures that all work accomplished meets quality stds and specs. 6. Establishes and maintains a professional working relationship with the customer and provides one-on-one direct familiarization briefings with the customer during the road trip. 7. Properly identifies (tags) customer property and equipment. Stores aircraft components and other customer property securely and safely. 8. Follows SOPs and JSAs/JRAs when operating GSE, such as power supply, hydraulic rigs, nitrogen filler carts, and oxygen service carts. Operates and supervises use of special support equipment used in removal and installations of major components. 9. Coordinates with Line Service and FBO ops to schedule movement of aircraft and assist with movement of aircraft. Also arranges, as needed, for the overhaul or repair of customer property and inspect/operate all interior installations and record discrepancies. 10. Provides regular updates on aircraft status and all customer support activity to Field Service Rep and management.

Additional Functions: 1. Assists in training new employees. 2. Performs other duties as assigned.

Other Requirements: 1. Formal training in the Company product line maintenance procedures and practices preferred to include Flight Safety Maintenance initial training for specific models required to support. 2. Must possess a working knowledge of the company policies and procedures, Repair Station and QC Manual, pertinent process specs, and technical reference matls. 3. Must possess a strong grasp of all aircraft avionics and mechanical systems and how they are related. Must possess the ability and understanding to comply with all system checkouts on an in-service aircraft.
 
Job Number: 8329
Job Location: Denver, CO
Rate: DOE
Per Diem: N/A
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 02/05/2018
Firm Name: INCONEN CORPORATION
Attention: Cathy O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

FPGA/ASIC Front-end Design-Secret, Baltimore MD 21240

Description:
PDS Tech, Inc. is seeking a FPGA/ASIC Front-End Designer with an Active DoD Secret Clearance in Linthicum, MD 21240. Contact Elisabeth Laspe for details. 314-669-8020 elaspe@pdstech.com
36 month contract.  Must have an Active Secret Clearance to qualify.  
Basic Qualifications:

-BS in Electrical Engineering, Computer Engineering, or comparable engineering discipline
-9+ years of relevant experience (7+ years with an MS, 4+ years with a PhD)
-Experience with full product life cycle (requirements, design, implementation and test) of FPGA Design and/or ASIC Design
-Working knowledge of digital signal processing and digital interfaces
-Experience leading a small project team to successfully complete ASIC Design or FPGA design
-Be able to work in teams and communicate clearly across various levels of management and engineers
-US Citizenship with an Active Secret Security Clearance

 
Preferred Qualifications:

-MS in Electrical Engineering, Computer Engineering, or comparable engineering discipline
-Experience with MatLAB, Mentor Graphics design tools, Synopsys or similar tools
-Familiarity with Xilinx, Altera, and/or Actel FPGA technology
-2+ years of experience working with Digital Signal Processing Algorithms and implementation

-Active DOD Top Secret Clearance


 
Job Number: 1710072505
Job Location: Baltimore, MD
Duration: 36 months
Input Date: 02/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Elisabeth Laspe
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023B5HAAU&URLSource=cjhunter

Facilities Plant Engineer 4 - VA - C

Description:
Chipton-Ross is seeking a Facilities Plant Engineer for an opening in Springfield, VA.

RESPONSIBILITIES:
Leads project teams to develops complex conceptual designs, final designs, cost estimates and provides maintenance support for the architectural phases of buildings, equipment installations, utility systems and grounds. Reviews architectural designs to assess compliance with customer requirements, building codes and applicable regulations by applying knowledge of construction principles, practices, and materials and takes appropriate corrective action. Leads project teams to develops complex conceptual designs, final designs, cost estimates and provides maintenance support for the civil/structural phases of buildings, equipment installations, utility systems and grounds. Reviews civil/structural designs to assess compliance with customer requirements, building codes and applicable regulations by applying knowledge of construction principles, practices, and materials and takes appropriate corrective action. Leads teams to develop complex conceptual analysis to determine the cause of asset failures and reduction in asset capacity by using reliability tools and methods (e.g., life cycle analysis, condition based maintenance, root cause failure methodology, mean time between failures, fault tree analysis, etc.). Leads others in engineering and facilitating the implementation of complex improvements in asset effectiveness, availability, and maintainability; to specify configuration of new assets in order to support reliability programs. Participates on or leads cross-functional teams to integrate the activities of multiple engineering disciplines, technicians, outside consultants and government agencies.Leads project teams to develops complex conceptual designs, final designs, cost estimates and provides maintenance support for the electrical phases of buildings, equipment installations, utility systems and grounds. Reviews electrical designs to assess compliance with customer requirements, building codes and applicable regulations by applying knowledge of construction principles, practices, and materials and takes appropriate corrective action. Leads project teams to develops complex conceptual designs, final designs, cost estimates and provides maintenance support for the mechanical phases of buildings, equipment installations, utility systems and grounds. Reviews mechanical designs to assess compliance with customer requirements, building codes and applicable regulations by applying knowledge of construction principles, practices, and materials and takes appropriate corrective action. Leads team to ensure accuracy of drawing archives/libraries. Oversees review of contractor redlines. Provides oversight to identify errors and documents construction changes to comply with regulatory requirements, facility standards, and record retention requirements. Leads teams that manage and support complex construction projects by providing input on vendor selection; reviews contractor proposals; interfaces with government/regulatory agencies; monitors project progress and vendor/consultant performance. Oversees preparation and presentation of project information to ensure compliance with applicable construction documents and jurisdictional requirements and to meet project objectives. Leads in the production or procurement of detailed design documents. Uses appropriate resources to produce project drawings, specifications, and permit application packages in accordance with project parameters. Coordinates designs. Reviews and approves documents. Leads in the translation of customer requirements to design options with documents and estimates. Identifies appropriate materials, equipment, and services by applying engineering principles and methodology. Develops and updates design standards and site-specific operating procedures in order to establish common practices. Participates in technical committees. Leads the business decision making process by providing input to strategic, short-term, and long-term infrastructure planning; completes studies; analyzes current conditions and future requirements; recommends capital improvements; gathers and analyzes data; and works with both internal and external customers in order to identify and assess alternatives and impacts. Leads in translation of customer requirements into conceptual design by analyzing intended use/occupancy and desired aesthetics, conducting code research, developing preliminary design elements, determining interdisciplinary engineering support requirements, estimating resource costs/requirements, identifying materials, equipment, and services, and developing initial project schedule in order to establish project scope in response to customer requirements.Plans, manages, and executes large or complex projects. Leads a team of stakeholders in the acquisition and modification of assets to enable the customer to achieve the defined business objectives in accordance with company and accounting policies. Manages project expenditures within authorized budgets. Creates, maintains, and communicates project management information. Manages the creation of contract scope. Ensures suppliers comply with all contract obligations. Leads in the interpretation and analysis of applicable regulations, standards, codes, and ordinances with respect to project requirements. Offers project alternatives in order to assure compliance. Provides support, as required, to secure permits.

EDUCATION:
Accredited Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.


FULL TIME/FIRST SHIFT
WORK HOURS: 8:00 AM - 4:30 PM

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.


 
Job Number: 165303
Job Location: Springfield, VA
Rate: $DOE
Duration: 12 Months
Input Date: 02/23/2018
Firm Name: CHIPTON ROSS
Attention: Brent Sizemore
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: bsizemore@chiptonross.com
Website: www.chiptonross.com

Firmware Engineer- DOD secret security clearance

Description:
PDS Tech, Inc. is seeking a candidate for the Firmware Engineer- DOD secret security clearance position located in Waco, TX.

 
Qualifications:
• A minimum of 3 years experience as a Hardware / Firmware Engineer that includes the following:
 Source code repository (Git, Subversion, etc.)
 Bug tracking tool suites
 Source code peer review processes
 Automated build environments
 Strong troubleshooting mentality
 Team-oriented and task-focused
 Software or firmware design principles
 Operate spectrum analyzers and oscilloscope
 Analog and digital hardware design experience
 Strong electrical engineering fundamentals
 Sets the highest ethical standards for self and others
• A minimum of a Bachelor’s Degree


Non-Negotiable:
• Resume must reflect FPGA design experience (Xilinx Vivado preferred)
• Resume must reflect VHDL or Verilog proficiency
• Resume must reflect HDL simulation tools
• Resume must reflect Tcl scripting familiarity


Preferred but not required:
• DoD secret security clearance

 
Job Number: 1710069518
Job Location: Waco, TX
Duration: 6 months
Input Date: 02/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Rebecca Burrows
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002Cm2tAAC&URLSource=cjhunter

Flight Readiness Technician D (4) - CA - C

Description:
Chipton-Ross is seeking 4 Flight Readiness Technician D's located in Palmdale, CA

RESPONSIBILITIES:
Inspector Aircraft, Mechanic Electrical and Electronics, and Mechanic Flight, Individual job duties may include: Perform operational checkout of aircraft prior to and during preflight. Inspect explosive and armament installations. Maintain aircraft historical records. Perform activities prior to flight status and final inspection and daily maintenance of completed experimental aircraft or major modification to experimental aircraft. Inspect and/or perform bench and flight line operational checkout and inspect, trouble-shooting, adjustment and repair of electrical and electronic systems. Inspect the calibration, adjustment, troubleshooting, repair and modification of electronic test equipment used exclusively by production and at times may be required to inspect the calibration, adjustment, trouble-shooting, repair and modification of other electronic test equipment as directed. Perform aircraft and/or spacecraft bench or flight line operational checkout, trouble-shooting, adjustment and repair of any electrical or electronic system. Fabricate, adjust, trouble shoot, repair and modify electronic test equipment. Perform operational checkout of hydraulic systems and mechanical systems. Diagnose and correct hydraulic and mechanical malfunctions. Operate engines during run-ups and troubleshoot when needed. Perform engine buildup as assigned. Install, repair, and replace tanks, power plants, generators, and aircraft engines. Install or replace reservoirs, etc. and repair leaks in same. Install or replace instruments such as fuel quantity, rate of climb and oil pressure indicators. Splice, route, clamp, solder, and string tie wires or wire bundles. Repair, install and hook up bomb, missile and rocket racks and pylons. Install and load ejection seats and guns. Install adjust, repair and replace structural parts and assemblies. Modify parts such as skins, doors, aircraft frames, test panels, clips, brackets, angles and ribs without the aid of jigs and ixtures. Modify aircraft components or aircraft support equipment. Perform composite repairs

ADDITIONAL EXPERIENCE:
Knowledgeable and skilled in F15 mechanical, structural, power plant, hydraulic, pneumatic, and electrical systems operation and flightline methods and common shop practices.
Knowledgeable and able to interpret and work from USAF technical orders (T.O.s), blueprints, sketches and written and verbal instructions.
Knowledgeable and able to use computer systems for office and shop applications.
Knowledgeable about and able to work in FOD controlled environments.
Knowledgeable and able to apply shop math.
Skilled in listening and interpersonal participation, and able to work with others as part of a team which includes giving and receiving feedback, and assisting others in completion of tasks.
Able to complete and maintain all required training and certifications needed to do your job efficiently.
Able to climb, stand, bend, kneel, reach, crawl, and walk on or around aircraft or work stands and in confined spaces.
* F-15 Crew Chief experienced personnel, sound understanding of Air Force Tech Order usage and application. Experienced Flight Line operations, preflight, launch, recovery, and functional checkout of Hydraulics/Avionics/Mission Systems/Weapons loading.
* F-15 Electrical/Avionics experience, sound understanding of Air Force Tech Order usage and application. Versed in Flight Line Operations, Avionics/Electrical preflight and functional checkout of disturbed systems.
* Weapons Load Standardization/Weapons loading: Plans, organizes, participate and directs aircraft armament systems maintenance activities. Establishes and evaluates performance and training standards, maintenance controls, and procedures. Checks methods and techniques used to load and unload munitions on aircraft, to repair and maintain aircraft release and gun systems, and to maintain, repair, and modify associated equipment.


EDUCATION/EXPERIENCE:
This job requires specialized vocational training or an Accredited Associate's degree and 3 to 5 years work
related F15 experience or an equivalent combination of education and experience

VARIABLE SHIFT
WORK HOURS: Candidates need to be available to work 2nd shift, if needed (2nd shift begins at 2:30 PM).

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

 
Job Number: 166698
Job Location: Palmdale, CA
Rate: $DOE
Duration: 12 Months
Input Date: 02/23/2018
Firm Name: CHIPTON ROSS
Attention: Brent Sizemore
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: bsizemore@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Engineer - Aerospace

Description:
Currently seeking multiple contract or direct Flight Test Engineers to join a growing team in Seattle, WA. Relocation or frequent travel to Moses Lake required.

The ideal candidate will hold a Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science and possess 5+ years relevant work experience related to experimental flight test operations.

Responsibilities of the Aerospace Flight Test Engineer:

- Coordinate test and certification requirements.
- Author flight test and ground test plans including test hazard analysis.
- Support ground operations, including weight and balance activities, fuel management, pre-flight and post-flight tasks and briefings.
- Support flight and ground test conduct and data collection.
- Analyze test data and evaluate compliance with regulations.
- Prepare certification test reports.
- Domestic and occasional international travel is required.

Requirements of the Aerospace Flight Test Engineer:

- Bachelor degree or equivalent combination of work experience. - Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
- 5+ years relevant work experience related to experimental flight test operations.
- Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.
- Strong ability to analyze results
- Communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
- Proficient in working with Microsoft Office applications including Word, Excel, and PowerPoint. Ability to quickly learn to operate new software.
 
Job Number: Flight Test Engineer
Job Location: Seattle, WA - Washington
Rate: Open
Per Diem: Possible
Overtime: Yes
Duration: 2-3 year contract, or direct
Start Date: ASAP
Input Date: 01/23/2018
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Instrumentation Engineers

Description:
Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.
This position will be in the Test and Evaluation Support unit, which has four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations.

The Instrumentation Engineer is responsible for supporting the operational and technical success of the instrumentation group. This person works closely with all other Instrumentation Engineers, Technicians, other T&E Support Staff to meet instrumentation requirements.

Job Duties and Responsibilities (Essential Functions):

� Provide instrumentation services: to include:
o production of instrumentation specifications, sensor selection, wire diagrams, installation diagrams (FTEO packages), sensor and system calibration, signal conditioning, derived parameters, cockpit displays, data validation, data tracking, data recording, documentation and conformity.
o Ensuring that the instrumentation systems and deliverables meet quality standards as well as all customer specifications to include accuracy, resolution, and frequency range, and function correctly within harsh operating conditions typical of aircraft.
o Provide instrumentation equipment management to ensure that equipment is maintained, calibrated and available for re-use to minimize waste.
� Provide instrumentation technical input: advise the organization in regards to technical information for the best technical selection of sensors and support equipment at affordable costs. Works closely with Product Development Unit when new equipment and systems are required or for the design of Flight Test safety equipment, or any complex mechanical installations that require stress approval.
� Support Program Teams: Works with OEM & STC program and project managers with technical resources requirements. Fully supports the test planners in regards to their instrumentation needs.


Knowledge/Skills/Abilities:
� Intermediate knowledge skills and competency of Flight Test Instrumentation (FTI) and data equipment for the purpose of recording and monitoring parameters fitted to experimental aircraft including associated of industry processes and practices to include:
o Electrical and avionics design,
o Data Systems Design Principles
o Telemetry
o Air data booms (straight nose and swivel-head)
o Static trailing cones
o Sensitive aircraft instruments
o Cockpit displays
o End-user interface
o Portable test equipment such as hand-held stick force gauges
o High-end GPS receivers and antennas for precise aircraft positioning
o Position transducers - sting potentiometers, rotary potentiometers, LVDTs, RVDTs
o Pressure transducers
o Flowmeters
o Temperature sensors - thermocouple wire/probes/assemblies, RTD probes, thermistors, glass bulb thermometers
o Strain gauges, load cells, force transducers, torque sensors
o Portable weather stations - wind speed/direction, outside air temperature, relative humidity
o Video recording equipment
o Signal conditioners
o Data acquisition systems and data loggers
� Intermediate knowledge of flight test operations and flight certification.

Level Requirements (Minimum):
Education
� Formal Instrumentation Training (Military or Civilian) � Preferred
� BS in Engineering or equivalent experience

Experience
� 5+ years relevant technical experience
� Intermediate understanding of flight and ground test planning and test conduct, and test data analysis.
 
Job Number: #301-Flight Test Instrumentation
Job Location: Moses Lake, WA - Washington
Rate: Open
Per Diem: Possible
Overtime: Yes
Duration: 2-3 years or direct
Start Date: ASAP
Input Date: 01/23/2018
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Instrumentation Technician

Description:
This individual in this position will work with engineers to design and install instrumentation to support the collection of flight test data. The ideal candidate is self-motivated, detail oriented, and knowledgeable on instrumentation theory.
Responsibilities:
� Reading and creating wire diagrams.
� Selecting or auditing appropriate sensors given engineering requirements.
� Working with customers and engineers to define appropriate instrumentation requirements.
� Designing instrument installations and creating installation instructions.
� Instrumentation installation.
� Evaluating instrumentation installations for function and safety.
� Troubleshooting instrumentation problems.
� Data acquisition system operation.
� Documenting data system practices and procedures.
� Generating instructions and operation manuals.
� Developing sensor calibration and functional test procedures.
� Maintaining calibration records.
� Domestic and international travel may be required.
Desired Qualifications:

� 3+ years instrumentation experience in a testing environment. Aircraft flight test preferred.
� Demonstrates personal accountability, initiative and versatility on a consistent basis with minimal guidance.
� Ability to work interdependently, and lead small groups.
� CATIA V experience beneficial.
� Experience with data processing and analysis beneficial.
� Computer programming experience beneficial.
� Proficient in working with Microsoft Office applications including Word and Excel.
If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers. Please feel free to forward this email to others who might be interested.

Candidates must have legal authorization to work in the United States, Canada or Mexico
 
Job Location: Moses Lake, WA
Per Diem: possible
Overtime: possible
Duration: LT
Start Date: asap
Input Date: 01/23/2018
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

Flight Test Technician 3- Secret

Description:
PDS Tech, Inc. is seeking a Flight Test Technician 3 in Patuxent River, MD.  

The successful candidate will perform a variety of aircraft maintenance.  The maintenance includes but is not limited to avionics, electrical, instrumentation, engine, hydraulic,  airframes, and other mechanical systems and subsystems.  Maintenance actions will include troubleshooting and diagnosing malfunctions, disassembly, wiring repair, wire harness manufacture and routing, engine repair and upkeep, composite repair, hydraulic systems rework, braking systems rework, repair, replacement, re-assembly or adjustment of various Air Vehicle systems in accordance with technical specifications, engineering instructions, service instructions, and processes and procedures.  Modification work will include installation, upgrades to, and the removal of components.   Additionally, the candidate will be expected to complete all required documentation such as records and maintenance work documentation and 4790.2 maintenance work documentation.
 
Performs developmental, experimental and production aircraft maintenance, repair, modification, installation, and testing tasks in a field of specialization; electrical / electronic, mechanical or instrumentation. Instructs, coordinates and performs the duties / functions of Flight Test personnel in area(s) of assignment. Determines the sequence for installing, removing, maintaining, repairing or fabricating critical aircraft components, or electrical / electronic, mechanical or instrumentation systems. Performs testing, rework and repair in various fields of specialization. Applies shop theory and skills in accomplishing assigned tasks working from incomplete engineering, electronic data, blueprints, sketches, engineering drawings, technical orders and written and verbal instructions. Works from blueprints, engineering orders, schematics, repair manuals and other technical documents on aircraft electrical / electronic, mechanical, plumbing, and hydraulics, power plant, structures or instrumentation systems. Performs drilling, reaming, fitting, assembly, trimming, riveting, splicing, insulating and other associated duties as assigned. Performs electrical, mechanical or instrumentation maintenance, repair and testing in support of specific flight test projects. Constructs, troubleshoots, calibrates, adjusts, tests, and maintains various types of complex aircraft equipment, components, devices or systems. Performs modifications and adjustments as necessary. Notifies lead personnel or supervision of any / all malfunctions, defects and damages of equipment, material and product. Checks work for completeness and accuracy. Performs Production Accountability duties associated with the processing, verficiation, quality auditing and inspection of assemblies, parts and tooling for which the individual has been delegated production accountability. May be required to work in other fields incidental to, and in connection with completion of assignment. May be required to perform other related duties as assigned.
 
AA or other 2 year technical degree in related discipline and 3 years of related experience. Or 8yrs of related experience in lieu of degre

 Active DoD Secret Clearance is required 

POC: Clyde (813) 426-9917 or ccallwood@pdstech.com 

 
Job Number: 1710071747
Job Location: Patuxent River, MD
Duration: 3 months
Input Date: 02/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Clyde Callwood
Address: 3922 COCONUT PALM DR STE 100
City, State: TAMPA, FL 33601
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i5000000238tfAAA&URLSource=cjhunter

Fuel Cell Assembly Mechanic

Description:
Fuel Cell Assembly Mechanics needed for direct hire long term positions.
Opportunity to work direct for the premier commercial aircraft manufacturing company in the US.

Mechanics in this position perform various procedures to accomplish fuselage and wing joining. Work is performed on composite / metal aircraft with occasional sealing.
  • Assemble and install parts, structural components and sub-assemblies to build and attach major wing assemblies.
  • Assemble, install, connect and rework plumbing and electrical components and systems.
  • Perform continuity checks on wire bundles and electrical components.
  • Locate work area using drawings which specifies airplane number, section number, and three-point location.
  • Set up assembly tools per tooling instructions or drawing.
  • Locate tools and/or parts on airplane using tooling holes, pilot holes, K holes, or by hand, per drawing or tooling instructions.
  • Align parts and secure in place using Clecos or tooling/hand clamps.
  • Check for good edge margins and alignment.
  • Shim and/or trim parts as required.
  • Drill pilot holes using drill motor and proper size drill bit(s).
  • Drill, ream, countersink full size holes in parts/assemblies, in proper sequence and to correct size using drill motor.
  • Disassemble parts and deburr holes using chip chasers, deburring tools, and files to prepare for installation of fasteners.
  • Use solvents to clean surfaces prior to sealing or assembly.
  • Apply sealant, alodine, primer, adhesives and special finishes.
  • Handle and dispose of hazardous materials in approved manner.
  • Install fasteners by correct type, size and in correct sequence per drawing, using correct tools (e.g., rivet gun and bucking bar, drill motor, power screwdriver, C-squeeze, ratchet wrench, nut runner).
  • Obtain two way radio and confined space flag, adhering to Communications System for Confined Hazardous Areas rules, per company procedures.
  • Operate mechanical lifts of various types to locate parts/assemblies into position or to perform assembly work.
  • Prepare, assemble and install tubing, standoffs, valves, regulators, compressors and ducts, using fasteners per drawing.
  • Install pre-assembled plumbing systems (e.g., hydraulic modules; smoke detectors, fire extinguishers, air, water and fuel systems), using ground straps and wires, clamps, lubricant and hand/power tools (e.g., screwdrivers, torque wrenches, nut runners).
  • Install wire bundles and electrical components using production illustrations and wiring diagrams.

Exposure to aluminum, titanium, steel, magnesium, exotic alloys, plastics, composites and hazardous materials. This position will require working in confined spaces of the wing fuel cells for extended periods. Employees crawl through an opening 17.75" X 10.00" in order to get inside the fuel cell. Employment in this position also requires, standing, reaching, turning, twisting, stooping, kneeling, crouching, squatting, crawling, pushing/pulling, working with sealants, paints and other hazardous materials and the use of personal safety gear for face, eyes, hand and ears.
 
  • Position will require working in confined spaces of the wing fuel cells and crawling through an opening 17.75" X 10.00".
  • High school graduate or GED preferred.
  • Positions open to all US Persons.  “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee.

 
Job Number: 1710078608
Job Location: Everett, WA
Duration: 24 months
Input Date: 02/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Camille Zunker
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023UFaAAM&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
GNC Aerospace Engineer ( Gilbert, AZ ) 6954262

Description:
GNC Aerospace Engineer ( Gilbert, AZ ) 6954262
12+ Month Contract


Perform requirements management, vendor technical monitoring and guidance, and I&T activities for Guidance Navigation and Control (GNC) spacecraft component hardware. This includes analyzing system requirements to perform hardware component selection, developing component hardware Statement of Work (SOW), analyzing, allocating and decomposing higher level spacecraft requirements to their respective GNC components, monitoring component vendor’s development activities per the SOW and developing test procedures and automated tests of the GNC hardware to verify requirements, support spacecraft I&T activities, perform detailed spacecraft simulations using in house simulation tools, and analyze data to develop performance and functional data reports to support requirements.

Looking for satellite experience, launch vehicle, UAV and aircraft is acceptable if their related experience is with GNC hardware component. Without the GNC hardware component experience that’s a show stopper for the candidate. 5 – 8 years of experience is good

Required Capability:
Must have hardware electrical Perl background.
Additional Capability: Knowledge of Matlab & Simulink is a plus.
 
Job Number: 6954262
Job Location: Gilbert, AZ
Rate: open
Per Diem: Split
Overtime: Yes
Duration: 12 month
Start Date: ASAP
Input Date: 01/19/2018
Firm Name: TALENTPRO CONSULTING
Attention: Tim
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X101
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

HDL/HDL Verilog Verification-Secret, Baltimore, MD 21240

Description:
PDS Tech, Inc. is seeking an Advanced Verification Professional with an Active DoD Secret Clearance in Linthicum, MD 21240. Contact Elisabeth Laspe for details. 314-669-8020 elaspe@pdstech.com
36 month contract. Must have an Active Secret Clearance to qualify.
Basic Qualifications:

-BS in Electrical Engineering or comparable engineering discipline
-9+ years of verification engineering experience (7+ years with an MS, 4+ years with a PhD)
-Expertise in HDL (VHDL/Verilog) and HVL (SystemVerilog)
-Experience with SystemVerilog Assertions (SVA)
-Advanced knowledge of UVM
-Experience with a coverage-driven verification methodology from planning through closure
-Knowledge of industry standard interfaces

-Experience with object oriented programming languages and concepts
-Be able to work in teams and communicate clearly across various levels of engineers
-US Citizenship with a  Secret Security Clearance

 
Preferred Qualifications:

-MS in Electrical Engineering or comparable engineering discipline
-Experience with Mentor Graphics design tools and Verification IP
-FPGA/ASIC Design experience
-Knowledge of digital signal processing
-Experience with scripting languages (Bash, Perl, Python, Tcl)

-Active DOD Top Secret Clearance


 
Job Number: 1710072506
Job Location: Baltimore, MD
Duration: 36 months
Input Date: 02/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Elisabeth Laspe
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023B5MAAU&URLSource=cjhunter

Inspector (Mechanical)

Description:
Notes from the Hiring Manager:

<> The Inspector should have experience inspecting cables and mechanical parts within a manufacturing environment , preferably with a mechanical background instead of electrical
<> They will receive multiple parts, which will be a mixture of cables and mechanical parts but vary from day-to-day; they should be able to see the part and know how to proceed with inspection, or at least be able to read the engineering drawings.
<> Experience with inspection tools such as Calipers, Measuring Devices / Equipment, Tape Measure, Feeler Gauge, etc
<> IPC 610 or 620 Certification is a plus


Summary:

To perform checks, tests, gauging, and instrument inspections of materials, goods in process, and finished goods.

Job Description:

> Performs audits, tests & inspections of materials, goods in process or finished goods within value stream (receiving through final system assembly) assuring quality first by determining compliance to drawings, procedures & specifications
> Applies established inspection procedures & uses simple inspection/testing tools and instruments of a “go/no go” nature.
> Develops and/or uses test and inspection set-ups utilizing mechanical and/or electrical test measurement equipment.
> Inspection methods and limits require good judgment and interpretation.
> Requires interpretation of inspection plans, tests and procedures.
> Recommends changes to procedures, processes, and drawings to improve efficiency and/or quality of the product.
> Identifies and documents nonconforming material in accordance with applicable procedures.
> Assists and trains others in assuring the proper test, measurement, and procedural operations.
> Ensure adherences to policies and procedures accordingly.
> Practices Total Quality principles and concepts.
> Acquire IPC-610/STD 001 and IPC-620 Certifications as applicable

Qualifications:

> 1-2 years related experience with a High School diploma preferred
> Knowledge of manufacturing and quality assurance processes and/or procedures.
> Knowledge of military and commercial quality specifications.
> Knowledge of Statistical Process Control.
> Knowledge of digital and analog circuitry.
> Knowledge of electrical and/or mechanical inspection.
> Knowledge of workmanship standards.
> Knowledge of packaging and preservation requirements.
> Understanding of Total Quality principles and concepts.
> Ability to communicate effectively verbally and in writing.
> Ability to use electrical and mechanical inspection equipment.
> Ability to develop and use simple to complex inspection set-ups.
> Basic algebraic skills.
> Ability to read, analyze and interpret detailed specifications, drawings, procedures, and schematics.
> Ability to work effectively within a team environment


Mark A Ludwig
Vice President
Global American Staffing
Email: mludwig@globalams.us
Direct: (508) 434 – 6180
Office: (508) 230 – 5030 x123
 
Job Number: 044_2017
Job Location: Hunt Valley, MD
Rate: DOE
Per Diem: Split Possible
Overtime: Yes / Possible
Duration: 12+ Months
Start Date: ASAP
Input Date: 02/23/2018
Firm Name: GLOBAL AMERICAN STAFFING
Attention: Mark A Ludwig
Address: 12 HARDING ST STE 204-205
City, State: LAKEVILLE, MA 02347
Phone: 508/230-5030
800 Phone: 800/510-8050
Fax Phone: 508/923-0005
Email: mludwig@globalams.us
Website: www.globalamericanstaffing.com

I/C SYSTEMS PROJECT ENGINEER - Refinery Exp (TX)

Description:
THIS IS NOT FOR AN INTERN, THIS POSITION REQUIRES AT LEAST 10-15 YEARS OF EXPERIENCE.

Basic Function
An Instrument Project Engineer (IE) is responsible for the design and implementation of process instrumentation from initial conception through field installation. They are responsible for designs that provide the most reliable and cost-effective instrument systems. In addition, the IE provides consulting services to process designers in developing process design specifications, develops operating and training manuals for mechanical and process personnel and participates in training operating personnel.

An IE:
• Writes purchase and construction specifications and writes and performs Factory Acceptance Tests.
• Uses vendor software programs for sizing safety and control valves.
• Specifies, procures, and configures Programmable Logic Controllers (PLC) and field hardware such as transmitters, controllers, pneumatic and electronic transmission system.
• Utilizes standards and best practices from American Petroleum Institute (API) and International Society of Automation (ISA), National Fire Protection Association (NFPA) to perform the above functions.

Responsibilities.
The Instrument and Controls Engineer may be responsible for:
• Function as project engineer on instrumentation and capital projects and large maintenance projects.
• Taking lead role on Instrumentation and controls capital projects including PLCs.
• Help identify areas where instrumentation/controls can improve plant operations and profitability.
• Developing capital and expense budget requirements related to instrumentation system upgrades, PM/PdM programs, repairs, expansions, etc.
• Serving as a technical resource to properly identify new and existing equipment specifications and proper operating parameters/ranges for instrumentation equipment.
• Overseeing application and interpretation of National Electric Code and other applicable city, state, federal codes and standards (e.g. NPRA, NFPA, API, ISA).
• Interact with Engineering and Construction contractors, both on-site and off-site.
• Leverage the application of instrumentation safety standards, mechanical integrity, design and maintenance.
• Using documentation systems and processes that maintain accurate instrumentation information and drawings.
• Support criticality assessments of the plant's instrumentation equipment.
• Design and evaluate Refinery Safety Instrumented Systems (SIS). Perform Safety Integrity Level (SIL) analysis and engineering upgrades of safety instrumented systems.

Basic Required Qualifications.
• Must be legally authorized to work in the United States, at least 18 years of age and possess a valid driver’s license.
• Must possess a bachelor’s degree in Electrical Engineering, Chemical Engineering, Mechanical Engineering, or Industrial Engineering.
• Must have three or more years of instrumentation experience and three or more years of direct experience in a refinery, chemical and/or manufacturing industry.
• Demonstrated knowledge and use of SPI (InTools) database and specifications.
• Proficient in the specification, troubleshooting, maintenance and overhaul of process control values.
• Demonstrated knowledge of PLC's.
• Proficient in MS office (Word, Excel, Outlook, Projects).
• Must be willing and able to perform, comply with the following:
• Wear Nomex fire retardant clothing and personal protective equipment (such as steel-toe shoes, ear, and eye protection).
• Maintain face daily so that a respirator/face mask can seal properly (some examples include being free of facial hair and/or clean shaven), climb up to 200 feet in height and work in enclosed spaces such as tanks and silos

Preferred Qualifications:
• Industry certifications (ISA)

FOSTER DESIGN'S BENEFITS:
• Working for a 54-year old company
• Minimum 10 Paid Holidays with no waiting period
• Immediate 401K participation, 1 year 100% vesting schedule, matching employer contribution
• Free Financial Consultant
• Medical/Dental/Vision/Prescription card – BCBS
• MetLife – Long Term Disability Insurance
• Vacation Pay
• Per Diem Split, when applicable
• Paid Weekly (Direct Deposit)
 
Job Number: FD-021618TX
Job Location: Borger, TX
Rate: $BOE/HR
Per Diem: Possible
Overtime: Possible
Duration: 11 Months or linger
Start Date: ASAP
Input Date: 02/16/2018
Firm Name: FOSTER DESIGN INC
Attention: Recruiter
Address: 200 W DOUGLAS AVE STE 110
City, State: WICHITA, KS 67202
Phone: 316/832-9700
800 Phone: 800/345-3394
Fax Phone: 316/832-9357
Email: contract@fosterdes.com
Website: www.fosterdes.com

Integration Specialist Technician

Description:
PDS Tech is seeking an Integration Specialist Technician for an open position in Huntsville, AL.
In your role, you will:

  • Perform assigned duties as an individual or as a member of a crossfunctional High Performance Work Team (to include supplier and customer representatives), during all phases of assembly, integration and test from developmental prototyping to the execution of production integration activities. Meet customer satisfaction requirements for quality, performance and reliability.
  • Perform functional checkouts and system testing of electrical, electronic, mechanical systems and ground support equipment. Troubleshoot, fault isolate and document nonconformances to correct malfunctions, to component level, with minimal technical support. Perform, as required, approved rework, modification, repairs and incorporation of changes per technical documentation and formal direction to electrical, electronic and mechanical systems.
  • Assist in defining, implementing, completing and monitoring the execution of the work scope. Make recommendations for refinement to equipment and integration processes by conducting studies and evaluations that result in product and process improvements.
  • Analyze product, process & test data, and rejection history to identify root cause for problems and assist with developing corrective action.
  • May be required to perform duties in and around ordnance or other hazardous materials while maintaining a safe working environment. May be required to obtain a security clearance, per specified program requirements.
  • Perform all elements of mechanical, electrical and electronic assembly, integration and test from detail fabrication, buildup of assemblies & subassemblies, through final integration.
  • Select correct parts, materials and tools to perform assigned duties. Duties may include the handling of hazardous waste (if qualified). Handle and protect components and assemblies in accordance with proper practice and procedures.Move materials from place to place within the work area.
  • Perform critical handling tasks and operate special electrical, electronic, mechanical and support equipment. Use and operate shop tools and equipment including precision measuring instruments and equipment including optics and lasers. Operate various types of shop equipment such as band saw, drill press, sander, bench grinder, metal bending equipment and other related machinery on a variety of materials.
  • Perform assembly work to complete assignments. Related tasks may include fabrication, installation, adjustment, fit check, fastener alignment, connections, and subassembly integration of parts and materials.
  • Perform chemical cleaning, surface finishing, painting, marking in accordance with specifications and procedures.
  • Use any electrical and electronic test equipment, instruments and tools required to perform assigned work, including precision measuring instruments and equipment. Connect, operate and/or verify support equipment, set up and check out of electrical, electronic and mechanical systems.
  • Troubleshoot, fault isolate and document nonconformances.
  • Perform related rework and approved repair necessary to accomplish assignments
  • Devise, develop and assemble approved shop aides and devices that may be required to adjust, test or maintain electrical and mechanical systems equipment.
  • Perform self examination and inspection as certified and required.
  • Plan, sequence and organize work operations to meet production schedules and expedite special jobs.
  • Coordinate information to advise others of situations or conditions that will delay work progress and suggest corrective action.
  • Assist others in the performance of their assigned work giving technical assistance to specifications and requirements as required.
  • Set up and maintain charts, logs, records and reports.
  • Maintain licenses, permits and certifications required to perform assigned work.
  • Perform other duties as assigned within the general job classification
  • Maintain a safe clean and orderly work area.

As our ideal candidate, you will meet the following requirements:
  • High School Diploma or GED
  • Possess technical skills necessary to perform work using detail work instructions & other released planning documentation and a variety of other supporting technical documentation as required including but not limited to: technical drawings, 2D & 3D models, schematics, circuit/wiring diagrams, process and equipment specifications, photographs, illustrations and sketches.
  • Must be a U.S. Citizen.





 
 
Job Number: 1610054052
Job Location: Huntsville, AL
Per Diem: No
Duration: 6 months
Input Date: 02/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002CGGpAAO&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Integration and Test Engineer - Level 2

Description:
Integration and Test Engineer - Level 2 (ACTIVE DoD SECRET CLEARANCE REQUIRED)

Location: Moorestown, NJ
Pay Rate: DOE ($47/hr - $57.50/hr)
Duration: 1 year W2 contract
Shift: First, 9/80, exempt OT
Travel: Yes, to be determined
**MUST be a U.S. CITIZEN**
**MUST have an ACTIVE DoD SECRET CLEARANCE – INTERIM SECRET CLEARANCE is SUFFICIENT**

Description
The candidate will perform the unit level test, engineering integration and test, engineering test & evaluation and support system level testing of COTS or custom computing hardware and real-time embedded signal processing firmware/software applications.
This engineer will be responsible for performing software/firmware development assignments from requirements through final testing.
This engineer will work with domain experts and military documentation to develop test software requirements, procedures, code and execute the tests.
This candidate will be responsible for designing and implementing system components using Object Oriented methods in C++.
This candidate should have an academic background and experience in: digital signal processing implementation, C/C++ programming, and simulation tools such as MATLAB.
The candidate must have excellent organizational skills, interpersonal skills and be able to communicate at both programmatic and technical levels with subordinates, peers, senior management levels and the customer.

Skill/Experience/Education (Mandatory):
ACTIVE DoD SECRET CLEARANCE
BS Degree in Electrical Engineering or Electrical and Computer Engineering.
Minimum of 8 years of professional level experience testing hardware subassemblies, nests, cabinets and systems for functional and performance requirements.
Experience in testing digital signal processing hardware and real-time software applications using C++ Object Oriented design and programming.
Configuration management and change management experience using ClearCase, ClearQuest and UCM.

Desired:
Simulation tools experience such as Matlab.
 
Job Number: 8327
Job Location: Moorestown, NJ
Rate: 47-57.50
Per Diem: Split Possible
Overtime: Exempt
Duration: 1 year
Start Date: ASAP
Input Date: 02/20/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MM-System Engineering DMSMS–Grade 04

Description:
EDUCATION
BS, Electrical/Mechanical Engineering
MS, Electrical/Mechanical Engineering

Experience as design/ component engineer with semiconductor industry, an electrical component engineer with an Avionics OEM (Original Equipment Manufacturer), or as a DMSMS (Diminishing Manufacturing Sources and Material Shortages)/Obsolescence Technical Engineer.

Provide design guidance to engineering/suppliers for use of preferred parts to minimize impact from DMSMS

Review new designs and propose replacement options for both electrical and mechanical component selections based on cost, volume, DMSMS, reliability, quality and availability.
Interface with equipment manufacturers and LRU suppliers to clarify parts support, availability and recommended resolutions.

Manage component lifecycle and Bill of Material grading through DMSMS forecast tool [e.g. Silicon Expert, IHS, Q-Star, etc.] to identify, forecast, and resolve obsolete component issues.
Investigate and close DMSMS issues from engineering, production, and/or fielded parts.
Identify and analyze critical parts and recommend resolutions for proactive monitoring efforts.

Develop processes and lead working group meetings to track status and action items for a given design or manufacturing issues regarding; DMSMS, failure analysis, corrective actions, and root cause analysis.
Measure and track internal metrics to ensure DMSMS processes are being followed and implemented.
 
Job Number: 17-699-1616
Job Location: Northeast
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 01/29/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com