Job Search Results

573 listings were found that matched your search words: Keywords: Electrical ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2018/09/21 Friday 08:35AM Pacific Time by ContractJobHunter. )

Listings 1 - 573

Go To My Job Tracker

Expand all descriptions

1st Shift

Description:
Perform maintenance in support of manufacturing facility on a variety of equipment throughout facility including machinery repairs, preventative maintenance, machine relocation, fabrication, welding, electrical repair and installation, plumbing (air, hydraulic, water) with use of a variety of equipment.  Responsible for monitoring hazardous waste for removal, maintenance of chemical storage area and clean up of chemical spills as required.  Nontoxic or non-hazardous.  Mainly Soap and/or grease
Will be operating a crane or fork lift.
 
Responsibilities:
Provide maintenance support in all areas of manufacturing facility including but not limited to machinery repairs, preventative maintenance, machine relocation, fabrication, welding, electrical repair and installation, plumbing (air, hydraulic, water) with use of a variety of equipment such as hand tools, welding equipment, fork lifts, and precision measuring equipment.  Maintain and develop preventative maintenance program for production related equipment.  Required to perform work in compliance to all safety and EHS policies and procedures. 
 
Qualifications:
  • Knowledge of EHS procedures and policies
  • Knowledge and safe use of production related equipment
  • Working knowledge and use of welding, electrical, and plumbing equipment including repair and maintenance of machinery
  • Millwright Skills and familiar with Electrical and/or Hydraulic
  • Able to interpret OEM handbooks and/or plant diagrams
  • Understanding of reading building plans and electrical schematics
  • Ability to use trouble-shooting and precision measuring equipment
  • Where applicable, trained in maintenance processes such as but not limited to welding, plumbing, electrical and mechanical troubleshooting
  • Vocational or technical training in a maintenance related discipline, strongly preferred

 
Training requirements:

  • Demonstrated ability to comply to maintenance safety procedures such as lock-out tags, etc.
  • Demonstrate ability to safely complete job tasks utilizing manual equipment as well as use of gauges needed for repair fabrication
  • Demonstrate ability to perform preventative maintenance, and repair of facilities equipment
  • Where applicable, complete safety and maintenance training and or certification

 
 
 
 
 

 
Job Number: 1610061453
Job Location: Las Vegas, NV
Duration: 12 months
Input Date: 12/19/2016
Last Updated: 09/21/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Eric Khassanov
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002G2BqAAK&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2233 - ELECTRICAL HARNESS DESIGNER - cv - word doc only

Description:
Design and route cable and harnesses inside interior cabinets according to integration instructions and guidance.

Create the harness 3D models to support engineering deliverables (HDR & H3D).

Create 2D layout for harness install (CATIA V5).

Design per BM, BAPS, RAE documents.

Conduct and/or participate in trade-studies to enhance the product definition throughout its lifecycle.

Deliver 3D models on time to meet team%u2019s commitments and program milestones.

Review and approve supplier deliverables.

Incorporate change management authorities (RFC, PCR) into 3D models.

Contribute to the team effort by meeting the team%u2019s objectives for productivity and quality KPI%u2019s.

Contribute to other relevant tasks based on program needs and demonstrate flexibility to adapt.


Have a University degree in mechanical Engineering of equivalent work experience in harness routing.

Have over 5 years of CATIA V5 Experience in harness routing and 2D layout.

Have experience with harness manufacturing or methods (formboards).

Have minimum of 5 years of relevant working experience in Aerospace or Transportation.

Have harness installation experience and you are familiar with ECAD tools & processes, BM%u2019s and BAPS.

Have excellent communication skills including the ability to read/ write in English.

Have a strong sense of responsibility and have good organizational skills and initiative

Are innovative and open to new ideas.

Have the ability to resolve problems and conflicts.

Are comfortable working with the MS Office suite.
 
Job Number: 2233
Job Location: Montreal, Canada
Rate: 55.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 02/08/2018
Last Updated: 04/11/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2304 - AVIONICS SYSTEMS ENGINEER - cv. word doc only

Description:
Support of Compliance to Certification Authority; author Certification Plans

Provide specialist advice relating to test methods and procedures

Review testing readiness and conformities of assigned systems

Review qualification, ground and flight test data of assigned systems

Review flight test reports containing data demonstrating proper system operation as required by Certification Authorities Regulations

Review and Sign flight release documentation (including safety of flight judgments)

Review system performance analysis to ensure proper compliance to regulations

Coordinate with other Certification Authority Delegates for integrated functions (ie, Human Factor, Pilots, et al)

May provide technical leadership to a small engineering team for dedicated technical investigation / test.

Bachelor's degree in Avionics / Electrical/ Aerospace Engineering, plus 12-15 years' experience in Avionics systems design and certification.

Able to obtain a Certification Authority Delegation for assigned systems

Working knowledge of Rockwell Collins Proline 21 or Fusion Avionics Systems would be advantageous.

Must have excellent communication skills in English - both written and oral and be PC literate.

Experience in flight-testing of civil aircraft; and knowledge of TCCA, FAA, and EASA certification requirements (ie, FAA CFR Part 25) required.

Mirabel is just outside Montreal, Canada.
 
Job Number: 2304
Job Location: Montreal/Mirabel, Canada
Rate: $63.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 12/03/2017
Last Updated: 04/11/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2317 - HYDRO-MECHANICAL SYS. INTEGRATOR - cv - word doc

Description:
Support the Global 7000/8000 Mod-line in Montreal by leading all engineering related activities for a timely resolution to production line issues.

Witness system functional testing and conduct technical investigations on Hydro-Mechanical systems related issues, analyze and develop solutions/recommendations and reports.

Disposition RFCs, RNCs, and Supplement 2s as required.

Review functional test requirements and ensure translation into mature functional tests.

Track and ensure successful implementation of systems installations and modifications.

Work with the product development team to assist with technical proposal activities, including preparation of written material and presentations.

Recommend and review design changes.

Develop good working relationships with various departments within the company and with all suppliers.

Bachelor of Engineering Degree and eligibility for Professional Engineer registration.

15 years' experience in aircraft Hydro-Mechanical systems (Fly-By-Wire & Control Surfaces, Wing High Lift, Hydraulics, Landing Gear, Brakes, etc).

Must have previous experience with fly by wire, wing high-lift or hydraulic systems on Commercial or Business Aircraft.

Experience in providing engineering support to a Final Line/ Production.

Must have experience in the definition and certification of at least one complex aircraft control system.

Flight Controls/FBW experience would be an asset.

Must have a good understanding of all facets of system definition, integration, and certification and have a good knowledge of aircraft systems and interfaces (e.g., electrical, Hydraulic , Avionics, Auto-Flight, Flight Controls) integration, testing and installation.

Conversant with design, qualification and certification test requirements of Hydro-Mechanical systems.

Familiar with Part 25 certification requirements and advisory material.

Possess strong integration skills, in both system partner management and system technical integration.
 
Job Number: 2317
Job Location: Montreal, Canada
Rate: 64.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 01/08/2018
Last Updated: 04/11/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2336 - SR. ELECTRICAL WIRING DESIGNER - cv. word doc only

Description:
Perform as a technical authority in wiring diagram design.

Review and approve WD documentation and datasets in part or in whole

Provide technical support on change management implementation (RFC, PCR).

Recommend and approve design changes

Engage interior system stakeholders and meet results

Provide technical leadership to team.

Identify and manage technical risks & opportunities

Support Supervisor to disposition conflicting requests from different stakeholders.

Communicate lessons learned to other community members

Have a University degree in aircraft avionics or electrical engineering or equivalent work experience in wiring integration.

Have a minimum of 15 years of relevant working experience in aerospace.

Have wiring design, wiring installation and/or wiring troubleshooting experience.

Have experience with Mentor Graphics Logic tool.

Have a strong sense of responsibility and have good organization skills.

Must have excellent communication skills including the ability to read/write in English.

Are comfortable working with MS office suite.

Are familiar with BM%u2019s, RAE documents and BAPS related to harnesses.

Must have Knowledge of New EWIS Regulations.

Competencies:
You communicate clearly and openly with your team.

You embrace changes and new ideas.

You are persistent to reach your goals.

You seek out and accept feedback.
 
Job Number: 2336
Job Location: Montreal, Canada
Rate: 59.00
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 02/09/2018
Last Updated: 03/13/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2350 - TOOL DESIGNER - cv, word doc only

Description:
Define standard tooling requirements and expertise for the production line.

Provide expertise in design and the use of tooling.

Analyze specifications and drawings to create more complex jigs, parts or tooling.

Evaluate and test new tooling products (tool proof).

Design tools, jigs, fixtures and templates.

Keep up-to-date with new technologies.

Design tools, jigs, fixtures and templates drawings.

Make tooling instructions.

College or University mechanical or aerospace
engineering degree or equivalent with a minimum of 11 years of relevant experience.

Previous experience in design and creation of MBD and 2D drawings of detail parts (machined parts, sheet metal), assemblies and installation drawings in CATIA V5.

Good understanding of hydraulic, pneumatic, and electrical systems.

Ability to read drawings for the purchase of tool.

Ability to design tools, jigs, fixtures and templates.

Knowledge of aeronautic tools.

Ability to communicate with supplier.

Catia V5 is required.

Catia V4 and Autocad are an asset.

Cost minded with the focus of maintain ability and ease of use.

Knowledge of Windows environment.

Must have experience in Primary and Secondary Aircraft Structures.

Previous experience with Mechanical systems and systems installations an asset.

Bilingual - must be able to read and write in both French and English and must have excellent communication skills.

IMPORTANT:

2 Positions available for Day shift (Start time = between 6:30 and 8:00AM)

2 Positions available for Evening shift (Start time = between 3:00PM and 5:00PM)

The workstations are shared between the 2 shifts, therefore
the start time for the evening shift depends on the start time
of the day shift.
 
Job Number: 2350
Job Location: Montreal, Canada
Rate: 63.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 6+ Mths
Start Date: ASAP
Input Date: 03/29/2018
Last Updated: 04/11/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Advanced Engineering Technician 2

Description:
Our client, a market leader and technology innovator, is seeking talented professionals to deliver cutting edge solutions to their customers. Well-respected, with a global presence, our client consistently offers a powerful and robust portfolio of products, services and solutions that help customers successfully execute their missions in today’s dynamic environment. With unsurpassed engineering, using an open systems approach, our client solves the nation’s most complex challenges while foreseeing future needs.

Advanced Engineering Technician 2
(US Citizenship Required*)
Scottsdale, AZ
2018-5473

Responsibilities:
• Support engineering activities such as design, test, check-out, modification, fabrication and assembly of prototype electro mechanical systems, experimental design circuitry, laser/light transmission devices or specialized test equipment
• Frequent contact with individuals representing other departments, and/or representing outside organizations
• Perform a variety of equipment/process operations involving an application or technical skills in a specific area (electrical, software, manufacturing, etc.)
• Interpret basic engineering drawings, diagrams and schematics
• Construct, modify, debug, troubleshoot, calibrate, test and adjust a variety of tools, equipment and systems
• Conduct, analyze, and document statistically based experiments to define process parameters
• Organize, analyze, and interpret data to identify cause/effect relationships and recommends resolution/process improvement
• Implement and document complex solutions for process improvement
• Design and construct basic tooling and fixtures to accomplish unique tasks
• Perform complex troubleshooting to the component level
• Work with Engineering and Operations Support
• Work from schematics, diagrams, written and verbal descriptions, layouts or defined plans to perform testing, checkout and trouble-shooting functions
• Assist in the design, construction, test and check-out of test equipment
• Use manufacturing, test, development or diagnostic equipment, including, but not limited to, test programs, oscilloscopes, signal generators and specialized test apparatus
• Analyze results and implement procedures for problems
• May develop/prepare test specifications/procedures, reports, documentation/specifications

Qualifications:
• Required – Active Top Secret clearance required. Candidates without active clearance will not be considered.
• Solid understanding of job; apply knowledge and skills to complete a wide range of tasks
• Work on assignments that are moderately difficult, requiring judgment in resolving issues or in making recommendations
• Focus on completing tasks or activities supporting implementation of procedures
• Solid knowledge of generally accepted technical theory
• Solid knowledge and proficiency in the use of fabrication tools
• Able to fabricate complex hardware
• Able to use computers and software applications to assist in job execution
*US Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Associate's degree in related discipline or equivalent is required plus a minimum of 3 years of relevant experience

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2018-5473
Job Location: Scottsdale, AZ
Duration: 12 Months
Input Date: 02/26/2018
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Jeremy Israel
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Advanced Quality Inspector 1

Description:
Our client, a market leader and technology innovator, is seeking talented professionals to deliver cutting edge solutions to their customers. Well-respected, with a global presence, our client consistently offers a powerful and robust portfolio of products, services and solutions that help customers successfully execute their missions in today’s dynamic environment. With unsurpassed engineering, using an open systems approach, our client solves the nation’s most complex challenges while foreseeing future needs.

Advanced Quality Inspector 1
(US Citizenship Required*)
Scottsdale, AZ
2018-5467

Responsibilities:
• Perform a variety of electrical/mechanical inspection operations on incoming parts/materials.
• Make critical decisions in the inspection of complex parts, using a variety of hand tools and scopes to ensure the compliance to requirements as defined in engineering drawings, industry specifications, and internal procedures.
• Deliver innovative solutions to meet customers changing business needs.
• Maintain updated on departmental standards to ensure services are consistent with and/or superior to industry best practices.
• Support and engage in programs, projects, and practices behind the culture and strategy and comply with all policies and procedures.
• Inspect parts, materials, assemblies and equipment to determine compliance to specified requirements
• Perform product inspection, real time defect evaluation, and housekeeping audits
• Prepare QA documentation
• Verify corrective action and rework implementation
• Generate and/or verify traceability information
• May use photography equipment or set-up for electrical/mechanical tests using simple equipment
• Interface with coworkers and internal customers and other departments
• May have occasional contact with suppliers

Qualifications:
• J-STD_001, 002, IPC 610, MIL-STD-883, MIL-STD-750 and X-Ray qualification certifications may be required
• Considerable knowledge of electrical theory, ESD control, workmanship standards, geometric dimensioning and tolerancing, stats & process control techniques, and operation of automated test equipment
• Skilled using PC applications (Microsoft Word, Excel)
• Skilled using basic mechanical measurement tools
• Interpersonal skills, conflict resolution skills
• Skilled in the set-up of basic electronic test configurations or mechanical test configurations
*US Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• High School diploma or the equivalent is required. Associates degree in Electronics, Computer Science, Mechanical engineering is preferred. In addition, a minimum of 4 years of directly related experience is required.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2018-5467
Job Location: Scottsdale, AZ
Duration: 6 Months
Input Date: 02/26/2018
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Bradley Davis
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

Aviation Mechanics - Clearance

Description:
Seeking Experienced Aviation Mechanics for a contract opportunity in San Antonio, Texas!

Work to be performed on a VIP aircraft, 747 platform and active Top Secret Clearance Required.
Several Openings For:
  • General Mechanic
  • Electrical
  • Structures
  • Avionics Tech
  • Quality Inspection
  • Supply Chain Specialist


Great Opportunity for Ex-military/Exiting Military/ and Veterans
Previous military experience a plus!


 
Experience performing routine maintenance, modifications, and rework on VIP - 747 aircraft.
Required- Minimum of 5 years' experience working on 747 platform.
Tools: no tools required
Location: San Antonio, Texas

***Current Security Top Secret Clearance required
US Citizenship Required: Clearance requirements will be used during resume screening. Individuals must hold a current Clearance or Equivalent Clearance/ investigation type to be considered for this position, clearance level must be noted on the resume. Must follow submittal procedures below for consideration. No phone calls please, only candidates that provide resumes with the job ID number will be contacted and considered for the opportunity.

**submittal must reference Job ID number 1710063637

Camille Zunker- czunker@pdstech.com
 
Job Number: 1710063637
Job Location: San Antonio, TX
Duration: 12 months
Input Date: 02/27/2017
Last Updated: 09/21/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Camille Zunker
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002GBZ0AAO&URLSource=cjhunter

Avionics Electrical Engineers

Description:
Jets experience a plus
 
Job Location: Southeast
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: jmac@advancedtechno.com
Website: www.advancedtechno.com

Avionics Electrical Engineers

Description:
Jets experience a plus
 
Job Location: Midwest
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: jmac@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Electrical System Designer

Description:
Avionic Electrical Systems Designer does integration and implementation. (design, certification and system support). Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of products and services. Contributes to planning, developing and coordinating of important engineering projects. Provides specialized technical assistance to team members. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems. Determines and develops own approach to solutions within schedule and cost objectives. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives. Acts as liaison with representatives outside of the assigned group/area Additional Functions. Actively works to improve daily processes and ensures all work meets customer requirements. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product. Performs other duties as assigned
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 5 yrs. in the specific technical discipline or 10 yrs. broad engineering experience in several technical disciplines with



Bachelors, or 3 yrs. in the specific technical discipline with Masters, or 1 yr. in the specific technical discipline with PhD.
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 01/30/2018
Last Updated: 05/18/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Technician

Description:
Avionics Technician provides technical expertise in testing aircraft systems, troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise by implementing process changes to reduce cost and meet schedule without compromising safety or quality. May fill in for the Senior Avionics/Electrical Technician thus ensuring that the company goals of safety and quality are enforced at all times while adhering to daily work plans to maintain schedule requirements.
Education:
High School graduate/GED. A & P license, FCC license or NCATT certification preferred. Four (4) years’ experience in an avionics/electrical career field; or two (2) years of accredited schooling in aviation electronics and two (2) years related experience.
 
Job Number: 116864
Job Location: Savannah, GA
Per Diem: Yes
Input Date: 01/19/2018
Last Updated: 05/18/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Rashmi
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics/Electrical Contractor (Custom Engineering)

Description:
Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of products and services

Unique Skills:
• Must be proficient at creating design and compliance data to support after-market installations on all company models.
• Must understand FAA/ODA/Industry requirements associated with aircraft modifications.

Education and Experience Requirements:
• Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Essential Functions:
• Contributes to planning, developing and coordinating of important engineering projects
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
• Acts as liaison with representatives outside of the assigned group/area
• Actively works to improve daily processes and ensures all work meets customer requirements
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
 
Job Number: 24-213
Job Location: Savannah, GA
Rate: $50 - $55
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 05/03/2018
Last Updated: 08/06/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
C/C++ VxWorks Embedded SWE

Description:
Programming Languages: C, C++, and C# CM Tools: Perforce, GIT, Accurev, Source Integrity Compilers: VxWorks, Unix, Lynx.OS, Visual Studio IDEs: Workbench, Eclipse, Visual Studio Technical
Degree - Electrical, Computer Engineer or Computer Science
Preferred: Experience with VME Bus Programming as well as working with VxWorks board support packages
 
Job Number: 7266799
Job Location: multiple
Rate: Market
Per Diem: Split
Duration: 6-12 months
Start Date: ASAP
Input Date: 03/14/2018
Last Updated: 03/14/2018
Firm Name: ADVANCED TECHNOLOGY
Attention: Domenic
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Completions Design Engineer

Description:
• Design Engineer/Mechanical Engineering for Final Phase Completions.
• Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft.
• Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations.
• Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis.
• Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
• Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam.
• Design Engineer will be required to liaison with the shop on engineering issues.
• Design engineer will employ design standards consistent with company standards and accepted design methods are executed under the direction of the Mechanical Engineering Group Head to meet the manufacturing schedule.
• Additional responsibilities are out lined in the job description and as assigned by the Mechanical Engineering Group Head.
• Other preferred skills: Excel, Word and Power Point.

Experience/Education Required:
• Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
 
Job Number: 24-236
Job Location: Savannah, GA
Rate: DOE
Per Diem: YES
Overtime: YES
Duration: 1 Year plus
Start Date: ASAP
Input Date: 04/02/2018
Last Updated: 05/03/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Support and Training - Instructor - Tech Spec II

Description:
UNIQUE SKILLS
CATIA v5 experienced with 5000+ hours. All Level 1 tools CATIA v5 (Part Design, Assembly, Drafting). Level 2 tools CATIA v5 Generative Surfacing, Free Style Shaping, Generative Sheetmetal, Generative Stress Analysis. Other tools: CATIA v5 Composites, Electrical EHI, Capitol Harness, Tubing experience a plus. Quantitative experience with Geometric Dimensioning and Tolerances a plus. Experience working within PDM systems such as Enovia, SmarTeam or NX/Teamcenter. Formal Classroom instruction experience required for CATIA and PDM.

EDUCATION AND EXPERIENCE REQUIREMENTS
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 10 yrs. in specific technical discipline or 15 yrs. broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs. for Masters and 4 yrs. for PhD in fields applicable to this job.

POSITION PURPOSE
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of client products and services

PRINCIPAL DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

ADDITIONAL FUNCTIONS
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
2. Performs other duties as assigned

OTHER REQUIREMENTS
1. Advanced degree in engineering, or related curriculum preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 17-758-82041
Job Location: Southeast
Rate: $60.00 to $62.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 02/28/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design and Analysis Engineer 2 positions

Description:
Mech Sys Design & Anlaysis Engr 3

Location: Seal Beach, CA
Duration: 9+ months

Description:
Supports the computer-aided design (CAD) development and documentation of mechanical, hydraulic , propulsion and flight controls Maintenance Ground Operations Systems (MGOS) ground support equipment (GSE) tooling design. Supports the development, testing and/or modification of GSE systems, components and installation designs/drawings to provide design documentation to downstream groups. Profficient with Geometric Tolerancing and Drawing Release (PDM / ENOVIA).Generates GSE CAD 3-D models (in CATIA V5) and documents analyses to validate and verify GSE and components meet requirements and specifications. Produces First Pass Quality (FPQ) GSE designs and drawings per MGOS standards, processes and Desk Instructions. Contributes to supplier development, test and production activities and directs the supplier to optimize integration and achieve program goals. Supports system components'' designs/proposals standards to provide installation and detail documentation. Trains others. Works under general direction.

Education / Experience:
Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.

Skill Code: 63B-Mechanical System Design
 
Job Location: Seal Beach, CA
Rate: Open
Per Diem: Split
Overtime: Yes
Duration: 9 months
Start Date: Asap
Input Date: 03/28/2018
Last Updated: 03/30/2018
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Drafting/CAD Technician

Description:
Non-Exempt Position



Working Hours: Monday - Friday 8am-5pm

OT: On a case by case basis



Summary:


  • Encompasses the use of integrated systems for computer-aided design used for the systematic representation and dimensional specification of mechanical and architectural structures.

  • Prepares drawings or schematics for mechanical, electrical, or electronic systems, equipment and structures.

  • Utilizes CAD digitizing techniques and skills.

  • Digitizes and edits integrated circuit drawings consisting of components and/or assemblies.

  • Makes engineering computations and prepares and revises specifications.




Requirements:


  • Considerable technical and content knowledge of the job. Understands practical applications, able to solve complex problems, full mastery of regular situations encountered.

  • Independently able to solve the vast majority of problems and ambiguities by examine pertinent facts and evidence.

  • Seeks direction for issues that cross functional areas and/or have broad impacts.

  • Works under limited site supervision.

  • Coordinates other activities beyond routine tasks.

  • Recommends process improvements, meets or exceeds deadlines, and able to maintain confidentiality and ensure compliance.

  • Contacts outside of immediate work group are frequent and broad.

  • May or may not have external contacts.

  • Contacts may be sensitive in nature.




Education:

AAS ina technical field is Required



Experience: 7+ Years



PPE: Standard will be provided.



Manager Must Haves:

- Solid Works

- Ability to read, interpret and correct drawings and schematics



Recent Mechanical Engineering/Technology graduates with 4 years degrees with 0-5 years experience will also be considered.

Supervising Construction or Production experience is a plus

 
Job Number: 18-05188
Job Location: Corning, NY
Rate: 0.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2018-09-11 00:00:00.0
Start Date: 2018-03-12 00:00:00.0
Input Date: 02/06/2018
Last Updated: 04/12/2018
Firm Name: NESCO RESOURCE
Attention: Anthony Kees
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
EE Technical Designer 3

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

EE Technical Designer 3
(U.S. Citizenship Required*)
Berkeley, MO
2018-5540

Responsibilities:
• Develop, maintain and release electrical/mechanical drawings, systems designs or engineering documentation and data by applying company, industry and governmental standards.
• Electronic/electrical component packaging, fixture/test station design, including the electronic/electrical/mechanical design process from detailed parts to complex mechanical assemblies, by selecting components, preparing design layouts, modifying existing designs and resolving complex design discrepancies to satisfy both customers and producibility requirements.
• Work closely with electrical engineering groups throughout all design phases and the fabrication teams during the build process.
• Using design tools, prepare documentation and incorporate design changes.
• Create, develop, and maintain systems designs by preparing design layouts, modifying existing designs and assisting in identifying design discrepancies.
• Support engineering system design and functionality validation activities.
• Develops and maintains product installation designs and part designs ranging from simple to moderately complex.
• Coordinate activities and products with internal partners and external suppliers.
• Work under general direction.

Qualification:
• Required – able to obtain Confidential security clearance
• Required – advanced skills in CAD/CAM
• Working knowledge of 3-D solid modeling
• Experience creating drawings using Computer Aided Draft systems, specifically Unigraphics NX8
• Meet International Traffic in Arms Regulation (ITAR) requirements to work on government contracts
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• AA degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience; or, 10+ years of experience in mechanical design, including mechanisms, structures and/or electronic packaging.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2018-5540
Job Location: Berkeley, MO
Duration: 10 Months
Input Date: 03/01/2018
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: jobs@moseleytechnical.com
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
EE Technical Designer 4

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

EE Technical Designer 4
(U.S. Citizenship Required*)
Ridley Park, PA
2018-5500

Wire Installation technical designer to support Philadelphia Engineering Electrical Design team on various design, integration and release of wire bundles, harnesses and installation drawings.

Responsibilities:
• Lead, develop, maintain and release electrical/mechanical drawings, systems designs or engineering documentation and data by applying company, industry and governmental standards for multiple customers.
• Manage, interpret and develop design requirements.
• Use design tools to document and maintain configuration design control.
• Manage, create, develop and maintain complex systems designs by preparing design layouts, modifying existing designs and integrating systems elements.
• Validate complex engineering system design and functionality.
• Lead process for product installation designs and part designs ranging from simple to complex.
• Coordinate activities and products with cross-functional groups, internal partners and external suppliers.
• Review and assign work to others. Work under minimal direction.

Qualification:
• Required – Advanced technical skill in CATIA V5 and ENOVIA

*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• AA degree in related discipline and typically 6 or more years of related experience or an equivalent combination of education and experience.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2018-5500
Job Location: Ridley Park, PA
Duration: 12 Months
Input Date: 02/26/2018
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Theo Hawthorne
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
EE/Wire Installation Designers - No Degree required

Description:
Wire Installation technical designer to support Philadelphia Engineering Electrical Design team on various design, integration and release of wire bundles, harnesses and installation drawings.
Catia V5 & ENOVIA
Email resumes to: mmccarthy@pdstech.com
 
Job Number: BO-PA-Ele
Job Location: Ridley Park, PA
Rate: $44.00/hour
Per Diem: Possible
Overtime: Possible
Duration: 12 Months+
Start Date: ASAP
Input Date: 03/13/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

EHI Engineers

Description:
Develop electrical wiring interconnect system (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wire harness assemblies, utilizing CATIA V5 Electrical and Sheet Metal Work Benches. Capable of interfacing with wiring diagrams, system, and EMI/EMC requirements. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements.
 
Job Location: Savannah, GA
Input Date: 07/07/2014
Firm Name: INCONEN CORPORATION
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: cathy@inconen.com
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
EO/IR Video Correction and Enhancement Algorithms-Staff Systems Engineer

Description:
*Data driven algorithm development to optimize performance given sensing/processing constraints
*Working with interdisciplinary team consisting of systems, software, firmware, and electrical
*Working with test engineering team with EO/IR sensor characterization
*Excellent planning, management and communication skills
*Ability to provide technical direction and generate material for proposals
*Ability to contribute to corporate roadmaps including EO/IR and embedded processing technology
*Work independently and create technical direction for the overall organization

Qualifications:
*Bachelor's Degree in Aeronautical, Electrical, Electronic, Mechanical, Software, or Systems Engineering, Mathematics, or Computer Science
*10+ years functional experience required
*Must be able to obtain a security clearance
*Design and development of algorithm development, including but not limited to:
-Detailed knowledge of Matlab/Simulink tools (includes embedded coder and HDL coder)
-Detailed knowledge of IR/EO systems including generation/use of characterization data
-Detailed knowledge of optimizing algorithms for FPGAs (creation of streaming model)
-Detailed knowledge of data analytics, including collection, parsing, and processing
*Knowledge of EO/IR systems modeling and characterization is preferred
*Master's Degree preferred
*Knowledge of model based design is preferred

Benefits: Visit http://www.teamglobal.com/benefits.html for more details.
 
Job Number: 127389
Job Location: Fort Worth, TX
Start Date: ASAP
Input Date: 02/23/2018
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: GCP Recruiter
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical & Instrumentation Designer - Refinery (OK)

Description:
Basic Purpose/Accountabilities: Responsible for the coordination of all phases of project efforts related to the production of documents associated with the detailing of an assigned project undertaken by the Refinery Technical Services Group.

Works directly with managers, supervisors, and team leads to plan and execute assigned projects.

Primary Functions/Responsibilities:
Safety
• Provide an environment and system that results in all work being conducted safely, environmentally friendly, and technically sound. Ensures that all compliance requirements are met or exceeded.
People
• Actively plan and coordinate all aspects of the project team’s efforts and objectives.
Integrity
• Responsible, accountable, and will deliver on any and all commitments made by the various project disciplines.
Responsibility
• Assign design and drafting resources to develop, design, construct, and start up assigned projects.
• Client and Ponca City recognized expertise lead in regard to design standards and processes.
• Ensures all quality measurements are achieved.
• Resource for direct and contract designers.
• Provide technical assistance to the field coordinators.
• Understand, support, and implement the Front End Loading work process and other best practice project execution.
• Communicates project priorities and personnel requirements to affected disciplines to ensure proper project scheduling.
• Conduct project quality assurance reviews with the various project leads.
Innovation
• Participate in and support the PSM group and RTS Engineering by using the best practices/lessons learned.
• Assist in identifying cost savings for project designs and or the Evergreen Systems.
Teamwork
• Participate in training opportunities.
• Network with peers internally and externally to share best practice information.
• Be a resource for training and developing Designers in order to support and enhance their work and progress.
• Provide guidance and mentorship to Designers.

Critical Skills:
• Technical/Functional Expertise
• Able to interact with Contractors
• Strong project and CAD experience
• Associate Degree in Detailed Design

Leadership Criteria:
• Uses technical expertise to contribute to the success of the team and refinery.
• Accountable and delivers on commitments.
• Customer focused.
• Has courage to surface and resolve conflicts.
• Strongly encourages creativity, innovation and continuous improvement
• Drive company core values.
• Provides constructive feedback to team members.
• Ability to balance multiple projects and assignments simultaneously and to prioritize the work.
• Ability to communicate, both verbally and in written form in a professional manner.

Other:
• Able to lift 50 lbs.
• Able to walk continuously for 3 hours
• Able to work outside for 10 hrs.
• Able to climb ladders to a height of 30’.

Other duties as assigned or deemed necessary.

FOSTER DESIGN'S BENEFITS:
• Working for a 54-year old company
• Minimum 10 Paid Holidays with no waiting period
• Immediate 401K participation, 1 year 100% vesting schedule, matching employer contribution
• Free Financial Consultant
• Medical/Dental/Vision/Prescription card – BCBS
• MetLife – Long Term Disability Insurance
• Vacation Pay
• Per Diem Split, when applicable
• Paid Weekly (Direct Deposit)
 
Job Number: FD-51181OKPCR
Job Location: Ponca City, OK
Rate: $BOE/HR BOE
Per Diem: Possible Split
Overtime: Possible
Duration: 11 Months or longer
Start Date: 05/14/2018
Input Date: 06/25/2018
Last Updated: 06/25/2018
Firm Name: FOSTER DESIGN INC
Attention: Recruiter
Address: 200 W DOUGLAS AVE STE 110
City, State: WICHITA, KS 67202
Phone: 316/832-9700
800 Phone: 800/345-3394
Fax Phone: 316/832-9357
Website: www.fosterdes.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical (EWIS) Engineer -TSII

Description:
UNIQUE SKILLS
Develop electrical wiring interconnect systems (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wiring diagrams, cable/wire harness assemblies, and rack/panel designs from electrical system schematics adhering to EWIS requirements. Select qualified electrical components such as connectors, backshells, and other parts. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements. • Aerospace Experience is required • Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required • Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative • Knowledge of Mentor Graphics Capital Harness Systems (CHS) is strongly desired

EDUCATION AND EXPERIENCE REQUIREMENTS
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.


POSITION PURPOSE
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of client products and services

PRINCIPLE DUTIES AND RESPONSIBILITIES
Essential Functions
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

ADDITIONAL FUNCTIONS
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

OTHER REQUIREMENTS
1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 18-813-123182
Job Location: Southeast
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 07/11/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical (EWIS) Engineer

Description:
Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Duration: Long Term Contract
Shift: 1st Shift


Unique Skills:
Develop electrical wiring interconnect system (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wire harness assemblies, utilizing CATIA V5 Electrical and Sheet Metal Work Benches. Capable of interfacing with wiring diagrams, systems, and EMI/EMC requirements. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements.
• Aerospace Experience is required
• Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required
• Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative
• Knowledge of Catia V5 Electrical is required

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

Principle Duties and Responsibilities:
Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7977
Job Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 03/21/2018
Last Updated: 06/11/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical (EWIS) Engineer

Description:
Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Duration: Long Term Contract (1-4 years)
Shift: 1st Shift

Unique Skills:
Develop electrical wiring interconnect systems (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wiring diagrams, cable/wire harness assemblies, and rack/panel designs from electrical system schematics adhering to EWIS requirements. Select qualified electrical components such as connectors, backshells, and other parts. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements. • Aerospace Experience is required • Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required • Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative • Knowledge of Mentor Graphics Capital Harness Systems (CHS) is strongly desired

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

Principle Duties and Responsibilities:
Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 8548
Job Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 03/09/2018
Last Updated: 03/21/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Applications Engineering

Description:
UNIQUE SKILLS
Experience with Autocad required. Aerospace experience required. Experience or knowledge of electrical connectors, backshells, shielding, wiring and electrical connectivity is required. Be Familiar with CFR 14 Part 25 and AS50881. Candidate must be able to create wiring diagrams and schematics to include the selection of qualified electrical components such as connectors, backshells and other electrical parts. Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required. Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project.

JOB DESCRIPTION
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs. in the specific technical discipline or 10 yrs. broad engineering experience in several technical disciplines with Bachelors, or 3 yrs. in the specific technical discipline with Masters, or 1 yr. in the specific technical discipline with PhD. Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

PRINCIPAL DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

ADDITIONAL FUNCTIONS
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

OTHER REQUIREMENTS
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 17-736-93664
Job Location: Southeast
Rate: $58.00 to $63.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 03/21/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

Electrical Applications Engineers

Description:
Develop electrical wiring interconnect systems (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wiring diagrams, cable/wire harness assemblies, and rack/panel designs from electrical system schematics adhering to EWIS requirements. Select qualified electrical components such as connectors, backshells, and other parts. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements. Mentor L-Cable
 
Job Location: Savannah, GA
Input Date: 07/07/2014
Firm Name: INCONEN CORPORATION
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: cathy@inconen.com
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design & Analysis Engineer (Digital/Analog) - VI - (CA)

Description:
Responsibilities
- Technical oversight of power electronics design activity, as well as for hands-on circuit design, modeling, and analysis.
- Analog and power electronics product development, from initial definition of requirements, through conceptual design,
detailed design and analysis, through final production and test.

Required Qualifications
- Experience with Power Electronics

Preferred Skills
- Background in analysis for stability, radiation effects, and aging
- Ability to mentoring less-experienced engineers
- Project leadership capability to be used as needed
- Breadth of knowledge to develop next-generation power electronics architectures and technology strategies
- Able to support make/buy decisions and proposals

This position requires the ability to obtain a US Security Clearance for which the US Government requires US Citizenship.

Bachelor's and 20 or more years' experience, Master's with 18 or more years' experience or PhD with 15 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

ACS Group (formerly 'Comforce')
 
Job Number: EEdiganlgCA
Job Location: El Segundo, CA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 12+ Months
Start Date: ASAP
Input Date: 01/17/2018
Last Updated: 03/09/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design Engineer

Description:
The primary design work will be in the areas of analog, digital, and power conversion circuitry used in commercial and military aerospace products.


You will interact with key colleagues and stakeholders in multiple disciplines and functions, including board design, hardware design, systems engineering, software development, program and project management, etc.


In addition you will :
• Design for safety, testability, and manufacturability
• Define Hardware architecture
• Select electrical components for rugged environments
• Schematic capture
• PCB area estimation, power dissipation, component stress
• Troubleshoot analog and digital circuits
• Perform and document root cause analysis
• Design Failure Mode Effect Analysis (DFMEA)
• Perform Circuit Worst Case Analysis
• Perform Electrical simulation
• Perform Design to cost analysis
• Support PCB design with EMC and manufacturability guidelines
• Support mechanical design, software, test engineering, and manufacturing
• Support qualification and acceptance testing
• Support lifetime testing, EMC, electrical pulses, ESD
• Sensor interface design (tachometers, accelerometers, synchros, etc.)
• Design for rugged, safety-critical environments

Role Summary/Purpose :

As Lead Engineer, Electronic Hardware Design for GE Aviation's well-established and highly successful global Avionics & Airborne Electronics business, you'll provide technical expertise to support development of embedded Avionics products, project execution and design support.

This is soup-to-nuts development of new state-of-the art aircraft components.
Qualifications/Requirements :
• BS Electronic Engineering or Electrical Engineering from an accredited university or college
• 2 years of experience designing analog and digital hardware for airborne or automotive applications
• 5 years of Engineering experience

ELIGIBILITY REQUIREMENT :
• This role is restricted to U.S. persons (i.e., U.S. citizens, permanent residents, and other protected individuals under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3)) due to access to export-controlled technology. GE will require proof of status prior to employment
Desired Characteristics :
• Understanding of analog, digital, and power theory
• Familiarity with Electronics Lab test equipment, and test methods
• Capable of developing and writing specifications in an engineering environment
• Expertise with PSPICE CAD design tools
• Familiarity with design, test and analysis tools and systems
• Development to DO-254 and DO-160 standards
• FPGA design experience
• DC to DC converters design experience
• Strong oral and written communication skills
• Strong interpersonal and leadership skills
• Ability to influence others and lead small teams
• Lead initiatives of moderate scope and impact
• Ability to coordinate several projects simultaneously
• Effective problem identification and solution skills
• Proven analytical and organizational ability
 
Job Number: 7671
Job Location: Pinellas Park, FL
Rate: Open
Per Diem: Split
Overtime: Yes
Duration: 12 months
Start Date: 2 weeks
Input Date: 03/08/2018
Firm Name: BENTLEY GLOBAL RESOURCES LLC
Attention: Johnathon Williams
Address: 3937 TAMPA RD STE 3
City, State: OLDSMAR, FL 34677-3115
Phone: 813/854-1500
Fax Phone: 813/854-1605
Website: www.bentleygr.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design Engineer

Description:
Electrical design, integration, test and production support of simulation equipment. Responsibilities include development of system-level drawings, cable drawings and wire lists.

Must have an Active Secret Security Clearance.
•Bachelor’s degree in Electrical Engineering or equivalent experience in an engineering discipline
•Prefer 4+ years of directly related experience
•Cable harness design experience
•Experience with electro-mechanical devices such as switches, relays, servos and solenoids
•Analog and digital circuit design experience
•Experience using CAD tools and Microsoft Office products
•Must have strong verbal and written communication skills with the ability to communicate complex issues to technical and non-technical audiences that include peers, management, and customers
•Ability to develop innovative solutions both individually and as part of a team
•Close attention to detail with a track record of producing designs that are right the first time

Desired Qualifications
•Experience using AutoCAD
•Familiarity with aircraft cockpit systems
•Experience using Programmable Logic Controllers
•Simulation equipment experience
•Circuit board layout experience
 
Job Number: 127187
Job Location: Broken Arrow, OK
Per Diem: No
Overtime: No
Duration: 6 months
Start Date: 03/19/2018
Input Date: 03/14/2018
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: David Dodson
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design Engineer

Description:
Location: Savannah, GA
Rate: $60.00 - $63.00/HR
Duration: Long Term Contract
Shift: 1st Shift


Unique Skills:
- Candidate shall have experience in one or more of the following: Electronic hardware design, Data acquisition system design, Industrial process measurement

Education:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.10 yrs in the specific technical discipline or 15 yrs broad engineering experience in several technical disciplines with Bachelors, or 8 yrs in the specific technical discipline with Masters, or 6 yrs in the specific technical discipline with PhD.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Company products and services

Principal Duties and Responsibilities:
Essential Functions:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 2. Performs other duties as assigned

Other Requirements:
1. Advanced degree in engineering, or related curriculum preferred 2. The level of technical skill
and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7701
Job Location: Savannah, GA
Rate: $60.00 - $63.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 05/17/2018
Last Updated: 08/06/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design Engineer

Description:
May be considered a specialist in a specific hardware area or generalist in multiple hardware areas and recognized in their organization. Significant domain knowledge of products and systems in assigned area. Plan, analyze, design, test and document hardware of high complexity and contribute to system integration. Understand, utilize, and improve internal processes and tools for the development of hardware. Decisions may have significant impact on cost, schedule, and technical performance. Act as a mentor to more junior engineers in additional areas including project planning and execution. Generate engineering estimates on complex hardware designs. Estimate, track, and report project costs and schedules. May lead cross-functional / domain teams in a Project Engineering role. Provide input to technical & product roadmaps. Bachelor's Degree in applicable engineering or science field or six years related exempt experience plus six years related exempt experience. Analysis - Demonstrates the ability to provide a logical, in-depth analysis of a problem or situation. Cooperation - Takes personal initiative to proactively serve as team motivator creating strong morale and synergy. Dependability - Ensures that all details of a project are accurate before delegating to others. Drive - Displays energy, persistence, and a positive attitude when working on most projects. Judgment - Bases decisions on factual information and considers alternative courses of action before reaching decisions. Listening - Consistently practices attentive and active listening and can accurately restate the opinions of others. Relationships - Develops relationships with others that are based on trust. Writing - Produces reports and proposals that are clearly and concisely written.

Job Specific/Job Description Additions:
- Design interfaces that link groupings of individual COTS products into integrated systems
- Produce System Block Diagrams and Schematics
- Design and produce documentation to build cable per company standard
- Design electro-mechanical interconnect assemblies
- Create engineering specifications and interface with third-party vendors
- Provide monthly cost and schedule status to a Cost Account Manager
- Relationships - Able to interface well with multiple engineering and operations disciplines on a daily basis.
- Agility - Can easily change focus between high level system concepts and low level design details.

Skills/Experience:
REQUIRED: Experienced with AutoCAD 2011 + to create schematics and cable assembly drawings.
REQUIRED: Experience with utilizing MS Office Applications.
REQUIRED: U.S. Citizen

PREFERRED: Training Simulator Design Experience
PREFEERED: Working Military Contract Experience
PREFEERED: Lotus Notes experience

?Product Information:
??Product developed in Binghamton: Design and develop Operational Flight and Maintenance Training Simulators for the Military, in Binghamton we focus on Ground and Rotary Wing simulators.
 
Job Number: 13705
Job Location: Binghamton, NY
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 months
Start Date: ASAP
Input Date: 02/27/2018
Last Updated: 03/09/2018
Firm Name: BENTLEY GLOBAL RESOURCES LLC
Attention: Johnathon Williams
Address: 3937 TAMPA RD STE 3
City, State: OLDSMAR, FL 34677-3115
Phone: 813/854-1500
Fax Phone: 813/854-1605
Website: www.bentleygr.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design Support Engineer

Description:
Essential Job Functions:

Position will support engineering development within the Electrical Engineering group at SIS-VT. The position requires the ability to design, analyze and troubleshoot circuits, read/update schematics, and test circuit card assemblies. A working knowledge of electrical design and schematic capture tools and P-Spice is required. This position will work in the following capacity:



• Support electrical design activities to incorporate additional electrical functionality into existing electronic systems used in precision guided munition electronics.

• Create the needed artifacts to support the electrical engineering documentation and release; artifacts can be used as evidence to substantiate the execution of processes.



Secondary Job Functions:

At QuEST, we often challenge our team members to temporarily work outside the scope of their primary job functions to broaden their skills and help the organization. Some of these roles, tasks, and opportunities include:

· Execution within multiple services

· Project Management: Execution and Support

· Technical Leadership and Technical Reviews

· Develop work instructions to ensure repeatability

· Personnel Management

· Onboarding and Professional Development: collaborate and mentor QuEST Team Members

· Cross-functional teams

· Geographic re-assignments

· Quality Management and Continuous Improvement



Specialized Knowledge / Skills

• Experience with engineering tools such as Subversion, requirements documents, and requirements based electrical design

• Self-Starter/Independent worker that demonstrates initiative and sound judgment and has the ability to manage and coordinate their work with multiple groups inside and outside the department



Education, Training, and Experience

• Bachelor Degree in Electrical Engineering, and/or equivalent proven experience

• Critical Thinker & Able to offer Value Added Solutions

• 6 years or greater in an engineering role

• Schematic Capture (preferably Mentor Graphics) and P-Spice experience beyond a basic level

• Basic knowledge of Matlab, MS Office and MS Visio

• Experience with engineering tools such as Subversion, requirements documents, and requirements based electrical design

• Familiarity with gun hardened electronics design a plus



Personal Work Attributes

• Proficient in communicating in English Language

• Strong Communication and Interpersonal Skills

• Strong Analytical and Problem Solving Skills

• Strong Computer and Web Navigation skills
 
Job Number: EDSE-1
Job Location: Vergennes, VT
Rate: Open
Input Date: 03/02/2018
Firm Name: QUEST GLOBAL SERVICES
Attention: Venkatesh Rao
Address: 111 FOUNDERS PLAZA STE 1700
City, State: EAST HARTFORD, CT 06108
Phone: 860/726-7025
Website: www.quest-global.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design and Aircraft Interior Eng Contractor TS II

Description:
UNIQUE SKILLS
Experience in engineering liaison and design of electrical systems that are part of and support aircraft interiors. This includes entertainment, power, lighting, cabin management and communication systems. Experience in writing engineering corrective action dispositions by performing associated research; creating modification wiring diagrams, schematics, wire harness drawings, electrical installation drawings and completing supporting analysis/calculations (e.g. voltage drop) AutoCAD, CATIA V5 and SmarTeam experience preferred Take ownership of deliverables produced & their quality. Coordination with the other Engineering disciplines, client and vendors. Experience with leadership/program management on a design program. Take lead role in the process of preparation of design deliverables to ensure appropriate checking & review of all documents / drawings before release.

EDUCATION AND EXPERIENCE REQUIREMENTS
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs. in specific technical discipline or 15 yrs. broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs. for Masters and 4 yrs. for PhD in fields applicable to this job.

POSITION PURPOSE
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

PRINCIPLE DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

ADDITIONAL FUNCTIONS
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

OTHER REQUIREMENTS
1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 17-777-110701
Job Location: Southeast
Rate: $65.00 to $70.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 07/11/2018
Last Updated: 08/13/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design and Analysis Engineer 4

Description:
Elect Design and Analy Engr 4

Location: El Segundo, CA
Duration: 1 year

Job Description:
Digital ASIC design and verification engineers (level 4) supporting.
The client Company's Satellite Capabilities organization and multiple satellite product lines based in Los Angeles.

Responsibilities:
Utilize high-level architectural documentation along with algorithm description and implement DSP functions for functions such as decimation, interpolation, general filtering, up-down conversion, digital beamforming, channelization, and be able to develop mathematical models in SystemVerilog to verify design implementation and develop and run scripts and Makefiles.

Required Qualifications:
- Experience in Digital ASIC design and verification.
- Experience with ASIC development including architectural definition, detailed design implementation using SystemVerilog, and functional verification using SystemVerilog.
- Experience with design architecture and detailed specification generation.

Preferred Skills:
- Knowledge and competency of UVM.
- Thrive in working within a fast-paced environment and work well in a team of ASIC engineers and Subsystem engineers.
- Demonstrated history of 1st pass success with ASIC designs.

Education / Experience:
Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

Skill Code:
64Y-Microelectronics
 
Job Number: 18-00729
Job Location: El Segundo, CA
Per Diem: Split
Overtime: possible
Duration: 1 year
Start Date: 3/12/18
Input Date: 02/28/2018
Last Updated: 03/08/2018
Firm Name: ICONMA LLC
Attention: Constance Whitcomb
Address: 4620 E 53RD ST
City, State: DAVENPORT, IA 52807
Phone: 312/502-4795
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design and Analysis Engineer 5

Description:
Elect Design and Analy Engr 5

Location: El Segundo, CA
Duration: 1 year

Description:
The Senior Digital ASIC Design Engineer (Level 5) will be supporting the client company's satellite capabilities organization and multiple satellite product lines based in Los Angeles.

Responsibilities
- Utilize high-level architectural documentation along with algorithm description and implement DSP functions for functions such as decimation, interpolation, general filtering, up-down conversion, digital beamforming, channelization, and be able to develop mathematical models in SystemVerilog to verify design implementation and develop and run scripts and Makefiles.

Required Qualifications
- Experience in Digital ASIC design and verification.
- Experience with ASIC development including architectural definition, detailed design implementation using SystemVerilog, and functional verification using SystemVerilog.
- Experience with design architecture and detailed specification generation.

Preferred Skills
- Knowledge and competency of UVM.
- Thrive in working within a fast-paced environment and work well in a team of ASIC engineers and Subsystem engineers.
- Demonstrated history of 1st pass success with ASIC designs.

Education / Experience:
Bachelor's degree with 14 or more years' experience, Master's degree with 12 or more years' experience or PhD with 9 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

Skill Code:
64Y-Microelectronics
 
Job Number: 18-00728
Job Location: El Segundo, CA
Per Diem: Split
Overtime: possible
Duration: 1 year
Start Date: 3/19/18
Input Date: 02/28/2018
Last Updated: 03/08/2018
Firm Name: ICONMA LLC
Attention: Constance Whitcomb
Address: 4620 E 53RD ST
City, State: DAVENPORT, IA 52807
Phone: 312/502-4795
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design and Cabin Management Eng Contractor TS II

Description:
UNIQUE SKILLS
Experience in engineering design of electrical systems that are part of and support aircraft interiors. This includes entertainment, power, lighting, cabin management and communication systems. Experience in creating wiring diagrams, schematics, wire harness drawings, electrical installation drawings and completing supporting analysis/calculations (e.g. voltage drop) AutoCAD, CATIA V5 and SmarTeam experience preferred Take ownership of deliverables produced & their quality. Coordination with the other Engineering disciplines, client and vendors. Experience with leadership/program management on a design program. Take lead role in the process of preparation of design deliverables to ensure appropriate checking & review of all documents / drawings before release.

EDUCATION AND EXPERIENCE REQUIREMENTS
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs. in specific technical discipline or 15 yrs. broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs. for Masters and 4 yrs. for PhD in fields applicable to this job.


POSITION PURPOSE
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of client products and services

PRINCIPLE DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

ADDITIONAL FUNCTIONS
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

OTHER REQUIREMENTS
1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 17-776-111061
Job Location: Southeast
Rate: $65.00 to $70.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 03/21/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design and Cabin Management Engineer

Description:
Experience in engineering design of electrical systems that are part of and support aircraft interiors. This includes:
• Entertainment, power, lighting, cabin management and communication systems. Experience in creating wiring diagrams, schematics, wire harness drawings, electrical installation drawings and completing supporting analysis/calculations (e.g. voltage drop)
• AutoCAD, CATIA V5 and SmarTeam experience preferred
• Take ownership of deliverables produced & their quality.
• Coordination with the other Engineering disciplines, client and vendors.
• Experience with leadership/program management on a design program.
• Take lead role in the process of preparation of design deliverables to ensure appropriate checking & review of all documents / drawings before release.

Education and Experience Requirements :
• Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required.
• 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.
 
Job Number: 24-194
Job Location: Savannah, GA
Rate: $65 to $70/hr
Per Diem: YES
Overtime: YES
Duration: 1 Year plus
Start Date: ASAP
Input Date: 02/22/2018
Last Updated: 03/19/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical EWIS Engineer/ Electrical Apps

Description:
Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services

Unique Skills:
• Develop electrical wiring interconnect systems (EWIS), capable of resolving all technical issues relating to EWIS.
• Produce and maintain wiring diagrams, cable/wire harness assemblies, and rack/panel designs from electrical system schematics adhering to EWIS requirements.
• Select qualified electrical components such as connectors, backshells, and other parts.
• Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements
• Aerospace Experience is required
• Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required
• Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative
• Knowledge of Mentor Graphics Capital Harness Systems (CHS) is strongly desired

Education and Experience Requirements:
• Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required.
• 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.



Essential Functions:
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Is consulted extensively by associates and others as a recognized authority within the field
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
• Approach to problem solving balances technical product, cost and schedule
• Works without appreciable direction; work is reviewed from a long-range perspective for desired results
• Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
 
Job Number: 24-204
Job Location: Savannah, GA
Rate: $58 - $63
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 02/22/2018
Last Updated: 03/19/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical EWIS Eng wCatia V5 - TS II

Description:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

Unique Skills:
• EWIS knowledge. Wire Harness Routing. Wire Harness Installation. CATIA V5 Electrical Workbench.

Education and Experience Requirements:
• Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.


Principal Duties and Responsibilities:
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Is consulted extensively by associates and others as a recognized authority within the field
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
• Approach to problem solving balances technical product, cost and schedule
• Works without appreciable direction; work is reviewed from a long-range perspective for desired results
• Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
 
Job Number: 24-256
Job Location: Savannah, GA
Rate: $60 - $67
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 05/17/2018
Last Updated: 06/22/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Description:
• Design power conversion circuitry potentially utilizing any standard power conversion topologies (non-isolated and isolated) Architect circuit card assembly-level power schemes.
• Utilize power conversion simulation programs like SIMPLIS to model converter design performance.
• Utilize analysis tools like MathCAD to assess electrical design robustness of power circuitry.
• Guide Electronic Computer-Aided Design (ECAD) personnel through PWB layout of power circuitry and technical drawing creation.
• Perform high level thermal analyses of critical power components.
• Design power converters to meet a set of requirements, sometimes defining those requirements.
• Perform design work within the bounds of a given schedule, and sometimes define the schedule.
• Present reviews of technical data to program leadership and technical staff.
• Act as a liaison between program and functional management.

Additional Job Details:
• Must be a U.S. citizen with the ability to obtain a Department of Defense issued Secret Security Clearance.
• Must have a Bachelor of Science in Electrical Engineering from an accredited University, with a minimum of 5 years of professional experience.
• Must have professional design, analysis, and test experience with analog electronic design and analysis, including FET, BJT, and Op-amp circuits.
• Must have professional design, analysis, and test experience with linear converters, and any two of the following non-isolated converter topologies: buck, boost, buck-boost.
• Must also have design, analysis, and test experience with any one of the following isolated converter topologies:
flyback, half-bridge, full-bridge, push-pull.
• Must have professional experience with performing circuit card assembly-level power architecture trades.
• Must have professional experience using PSPICE (or similar), and other circuit simulation tools.
• Must have professional experience with analysis tools such as MathCAD.
• Must have professional experience with guiding ECAD folks through layout (power focus).
• Must have professional experience with thermal concerns of electronics.
• Must have professional experience with taking, analyzing, and correcting Bode plots.
• Must be a self-starter, a quick learner, and be able to function in a dynamic environment, and have good time management skills. Must have strong teaming skills, and good communication skills.
• Must be customer-focused.
 
Job Number: 384211
Job Location: Tucson, AZ
Rate: $50.00
Input Date: 03/08/2018
Firm Name: CDI CORPORATION
Attention: Jenesis Omaga
Address: 17177 PRESTON RD STE 300
City, State: DALLAS, TX 75248
Website: www.cdicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Location: Savannah, GA
Pay Rate: $58/hr - $63/hr
Duration: Long Term Contract
Shift: First

Unique Skills:
-This position will review designs for Electrical Systems aspects.
-Activities include interacting and coordinating with DERs/ARs during a certification project, coordinating, tracking and completing certification tasks, writing certification plans, test plans, test reports and preparing related paperwork and forms.
-The ideal candidate will have:
-At least one (1) year experience with certification activities associated with STC projects
-Experience with aircraft interior outfitting preferred.
-Current Electrical Systems DER/AR designation preferred
-EWIS experience desirable

Education and Experience Requirements:
-Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

-Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area.

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7129
Job Location: Savannah, GA
Rate: 58.00-63.00
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 05/22/2018
Last Updated: 06/11/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Job Description:
Must be able to obtain a Secret Clearance. Can start un-cleared or with an interim.
Design power conversion circuitry potentially utilizing any standard power conversion topologies (non-isolated and isolated) Architect circuit card assembly-level power schemes. Utilize power conversion simulation programs like SIMPLIS to model converter design performance.

Utilize analysis tools like MathCAD to assess electrical design robustness of power circuitry. Guide Electronic Computer-Aided Design (ECAD) personnel through PWB layout of power circuitry and technical drawing creation. Perform high level thermal analyses of critical power components.

Design power converters to meet a set of requirements, sometimes defining those requirements. Perform design work within the bounds of a given schedule, and sometimes define the schedule. Present reviews of technical data to program leadership and technical staff. Act as a liaison between program and functional management.

Additional Job Details:
*Must have a Bachelor of Science in Electrical Engineering from an accredited University, with a minimum of 5 years of professional experience.

*Must have professional design, analysis, and test experience with analog electronic design and analysis, including FET, BJT, and Op-amp circuits.

*Must have professional design, analysis, and test experience with linear converters, and any two of the following non-isolated converter topologies: buck, boost, buck-boost.

*Must also have design, analysis, and test experience with any one of the following isolated converter topologies: flyback, half-bridge, full-bridge, push-pull.

*Must have professional experience with performing circuit card assembly-level power architecture trades.

*Must have professional experience using PSPICE (or similar), and other circuit simulation tools.

*Must have professional experience with analysis tools such as MathCAD.

*Must have professional experience with guiding ECAD folks through layout (power focus).

*Must have professional experience with thermal concerns of electronics.

*Must have professional experience with taking, analyzing, and correcting Bode plots.

*Must be a self-starter, a quick learner, and be able to function in a dynamic environment, and have good time management skills.

*Must have strong teaming skills, and good communication skills.

*Must be customer-focused.
 
Job Number: AZ41311
Job Location: Tucson, AZ
Rate: 50.00
Per Diem: Possible
Overtime: Possible
Duration: 12 months
Input Date: 03/07/2018
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Bill Carriveau
Address: 7310 RITCHIE HWY STE 400
City, State: GLEN BURNIE, MD 21061-3092
800 Phone: 866/277-3343
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
SUMMARY
Performs a variety of engineering work including design, analysis, substantiation, certification, drawing interpretation and project management as related to transport category aircraft.

ESSENTIAL DUTIES AND RESPONSIBILITIES
Create step by step work instructions for the removal and installation of hardware and components as they relate to aircraft structures, systems, interiors and avionics. Troubleshooting of noted aircraft systems Repair, design and analysis of metal, composite and metal bond structures Knowledge of the Federal Aviation Regulations FARs from Title 14 of the Code of Federal Regulations as they apply to transport category aircraft. Knowledge of cabin specific regulatory requirements, including flammability and crashworthiness as examples Familiarity with the Supplemental Type Certificate STC process Familiarity with the FAA Airworthiness Directive AD process and rules governing disposition Translates guidance and engineering principles and procedures into usable working direction for assigned projects Ability to read and interpret technical drawings, preferably those created by Boeing, Airbus and Douglas. They should also be familiar with the documents needed to routinely maintain commercial aircraft Structural Repair Manual SRM, Aircraft Maintenance Manual AMM, Illustrated Parts Catalog IPC, etc. Ability to analyze Original Equipment Manufacturer OEM source documents Service Bulletins, Service Letters, etc. and make independent decisions based on analysis of available data regarding incorporation on Customers fleet. Ability to quickly learn and adhere to Operators specific processes and procedures. Project Management skills multiple task Gathers, coordinates and applies basic engineering data using established and appropriate or defined engineering principles and procedures Applies area of specialty to design, develop and implement creative and innovative solutions to difficult problems Reviews progress with management and recommends corrective action along with review of alternatives Performs such individual assignments as supervisors and superiors may direct ensures adequate and continuous controls are exercised over all assigned activities affecting quality establishes and maintains effective work relationships within the department, the Corporation and the community and maintains the professional competence, knowledge and skill necessary for the satisfactory performance of all assigned responsibilities Travel as required All other duties as assigned.
 
Job Number: 17-729
Job Location: Midwest
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 03/21/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Electrical Engineer develops electrical wiring interconnect system (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wire harness assemblies, utilizing CATIA V5 Electrical and Sheet Metal Work Benches. Capable of interfacing with wiring diagrams, systems, and EMI/EMC requirements. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements. • Aerospace Experience is required • Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required • Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative • Knowledge of Catia V5 Electrical is required.

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs. in specific technical discipline or 15 yrs. broad Eng. experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs. for Masters and 4 yrs. for PhD in fields applicable to this job.
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 01/30/2018
Last Updated: 05/18/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Electrical Engineer develops electrical wiring interconnect systems (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wiring diagrams, cable/wire harness assemblies, and rack/panel designs from electrical system schematics adhering to EWIS requirements. Select qualified electrical components such as connectors, backshells, and other parts. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements. • Aerospace Experience is required • Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required • Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative • Knowledge of Mentor Graphics Capital Harness Systems (CHS) is strongly desired


Education and Experience Requirements:

Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs. in specific technical discipline or 15 yrs. broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs. for Masters and 4 yrs. for PhD in fields applicable to this job. 
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 01/26/2018
Last Updated: 03/09/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer (Cabin Systems)

Description:
• Ideal Candidates will have electrical engineering experience with Aircraft Cabin Interiors and System. This includes:
o Cabin interior monuments and Seats
o Cabin Management System
o Cabin Entertainment System
o Cabin Lighting and Cabin Switch Controls
o Telephone System
o Satellite communications
o Water System and Waste System
o EWIS

Education and Experience Requirements:
• Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 10 yrs in specific technical discipline or 15 yrs broad engineer experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.
 
Job Number: 24-208
Job Location: Savannah, GA
Rate: $58 - $63
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 02/22/2018
Last Updated: 06/22/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

Electrical Engineer - Level 3

Description:
Location: Centennial, CO
Rate: DOE
Duration: 1 year contract
Overtime: Exempt
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****

Job Description:
- Provide touch labor for the SIL modifications for Vulcan.
- Technician labor for cable build and rack wiring modifications.

Education:
- High School Diploma
- 5+ years of experience
 
Job Number: 8723
Job Location: Centennial, CO
Rate: DOE
Per Diem: Split Possible
Overtime: Exempt
Duration: 1 yr
Start Date: ASAP
Input Date: 08/29/2018
Last Updated: 09/14/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Level 3

Description:
Location: Centennial, CO
Rate: DOE
Duration: 1 year contract
Overtime: Exempt

****MUST be a U.S. Citizen****

Job Description:
- Main task will be to provide technical system and design support to existing electrical ground command and control systems.
- Develop design solutions typically involve Commercial-Off-The-Shelf (COTS) hardware implementation for command, control, communications and instrumentation systems, as well as stand-alone Test Equipment systems.
- Duties include analysis, implementation and hands-on test of hardware in the Denver laboratories and sites located in Florida, Alabama and California.
- Tasks can vary from equipment rack level design to development of future hardware and system upgrades at chassis or board level.
- Many of our tasks involve instrumentation activities including interfacing to various types of transducers and design of complex, high-channel count Data Acquisition Systems (DAS).
- Our primary product consists of complex engineering drawings, parts lists, test procedures, etc that result in hardware build, test and installation.
- Additional activities routinely include anomaly resolution, data analysis, improvement/upgrade projects and future hardware trade studies. We interface our Ground Equipment to the Launch Vehicle Avionics and to Mechanical Ground and Fluid Control hardware used to prepare, test and launch rockets.

Job Requirements:
- Support ELC program with engineering design capability.
- Ground system design and troubleshooting experience.

Education:
- Bachelor’s Degree preferred.
- 5+ years of experience.
 
Job Number: 8724
Job Location: Centennial, CO
Rate: DOE
Per Diem: Split Possible
Overtime: Exempt
Duration: 1 yr
Start Date: ASAP
Input Date: 03/08/2018
Last Updated: 04/13/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Electrical Engineer - Power (OK)

Description:
POSITION OVERVIEW- KEY JOB ELEMENTS:
This position is for the power electrical engineer position. This candidate will provide technical expertise, project management, as well as, project development for the client's electrical system in this plant facility. This engineer will handle all aspects of this plant's electrical system and provide electrical engineering for capital improvement projects (refinery). There will be occasion where support will be needed in the instrumentation area. BSEE REQUIRED.

Key Job Duties and Job Responsibilities:
These key job elements are included but not limited to the Electrical Engineer position:

This candidate will be required to oversee power requirements and coordinate with other projects in progress. Conduct system analysis studies (load flow, voltage drop, short circuit, etc.) for capital improvement projects. Prepare electrical equipment specifications and obtain and review all vendor quotes for electrical equipment. Must interface with other engineering personnel, construction contractors, and vendors during the project. Ensure during planning all work is completed within corporate safety guidelines and promote same throughout the project to completion.

Additional job responsibilities required for this position are as follows:
Review and approve electrical drawings for projects pertaining to equipment location, one-line diagrams, electrical area classification and schematics. Prepare cost estimates (both budgetary and definitive) for current and future electrical projects. Must support multidisciplinary projects by providing electrical expertise and additional recommendations.

Must be able to participate in the development of work scope for electrical equipment related to turnaround and capital projects. Develop projects to meet the reliability division's objectives including reliability, capacity, growth, maintainability and expendability.

Inspections: will be required to perform safety inspections and initial startup safety reviews.

Cost Estimates: will be required to manage electrical projects, such as cost and scheduling, safety, and other miscellaneous from conceptual studies, design, construction and safe start-up. Will be required to perform preliminary engineering studies by preparing project objectives letter, milestone schedule and cost estimate for current projects and future projects.

Standards and Safety: Must adhere to company standards in electrical design, equipment specifications, construction and testing. Must have the ability to apply and interprete the National Electric Code and other applicable codes and standards (e.g. NFPA, API, UL, API, and other). Must adhre to the county and city regulations including special equipment approvals (UL) and building permits.

Additional skills/requirements:
1. Develop one-line diagrams that will accomplish the needs of a project and the reliability of the refinery.
a. How implementation will show how to control cost on a project while allowing expansion in the future
b. Show protective relaying schemes.
1. Develop options and develop Substation layouts that will accomplish the need of a project and the reliability of the refinery.
a. How implement enough to control cost on a project while allowing expansion in the future
b. Show equipment layout using appropriate working space requirements.
1. Brainstorm options and develop Medium Voltage and low voltage feeder routing using either cable tray or conduit in classified areas.
a. Use proper grounding.
b. Structural steel to run the tray on.
c. Interface between multiple engineering disciplines required to get the steel done.
1. Conduct and evaluate power studies (with ETAP) of electrical systems to verify that the new electrical equipment will work for:
a. Load Flow
b. Voltage Drop
c. Incident Energy (Arc Flash)
d. Short Circuit Current Analysis (Bracing)
1. Medium Voltage Switchgear experience in design
a. Writing specifications
b. Approve vendor (shop) drawings
c. Incorporating protective relaying schemes using Schweitzer relays
d. Familiar with Client Powervac switchgear and Client's new Entelliguard system
1. Medium Voltage MCC's (Specific to Allen Bradley)
a. Writing specifications
b. Approve vendor (shop) drawings
c. Brainstorm electrical schematics used to install the MCCs
d. Incorporating protective relaying schemes using Schweitzer relays
1. Medium Voltage Bus Duct
a. Writing specifications
b. Approve vendor (shop) drawings
1. Unit substation Medium & Low Voltage transformers
1. Writing specifications
2. Approve vendor (shop) drawings
3. Incorporating protective relaying schemes using Schweitzer relays
1. Low Voltage Switchgear (Schweitzer relaying and Client's new Entelliguard)
a. Writing specifications
b. Approve vendor (shop) drawings
c. Incorporating protective relaying schemes using Schweitzer relays
d. Familiar with Client Powervac switchgear and Client's new Entelliguard system
1. Low Voltage Bus Duct
a. Writing specifications
b. Approve vendor (shop) drawings
1. Low Voltage MCCs
a. Writing specifications
b. Approve vendor (shop) drawings
c. Brainstorm electrical schematics used to install the MCCs

FOSTER DESIGN'S BENEFITS:
• Working for a 54-year old company
• Minimum 10 Paid Holidays with no waiting period
• Immediate 401K participation, 1 year 100% vesting schedule, matching employer contribution
• Free Financial Consultant
• Medical/Dental/Vision/Prescription card – BCBS
• MetLife – Long Term Disability Insurance
• Vacation Pay
• Per Diem Split, when applicable
• Paid Weekly (Direct Deposit)
 
Job Number: FD-81018-1OKPCR
Job Location: Ponca City, OK
Rate: $ BOE/HR
Per Diem: Possible Split
Overtime: Possible
Duration: 11 Months
Start Date: 10/01/2018
Input Date: 09/13/2018
Firm Name: FOSTER DESIGN INC
Attention: Recruiter
Address: 200 W DOUGLAS AVE STE 110
City, State: WICHITA, KS 67202
Phone: 316/832-9700
800 Phone: 800/345-3394
Fax Phone: 316/832-9357
Email: contract@fosterdes.com
Website: www.fosterdes.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Power - Refinery Exp (KS)

Description:
Our Client is seeking an Electrical Engineer for its Industrial / Energy group located in our Wichita, Kansas office. Engineering projects will include refining, gas processing and other related process facilities. This position is available due to growth opportunities.

Job Duties:
1. Prepare electrical equipment specification for MCC's, Switchgear, Substations and electrical equipment selection.
2. Review specifications, drawings and vendor equipment documentation from both within the electrical engineering discipline and with other engineering disciplines for compliance with the project requirements.
3. Apply design knowledge in power distribution, grounding, lighting, control systems & equipment specification & selection.
4. Complete projects with the specified electrical deliverables such as equipment supplier bid evaluation, load list, electrical equipment, cable and conduit schedules, generator sizing, one-line diagrams for low & medium voltage, hazardous area classification drawings and ground grid design.
5. Ensure adherence to industry standards and building codes.

Job Requirements:
1. Demonstrated experience with electrical design projects including coordination with other engineering disciplines for oil & gas facilities.
2. Demonstrated experience in low & medium voltage power distribution (including power system design), equipment/ protective device sizing and power system studies.
3. Demonstrated experience with single line diagrams, area classifications, power and control schematics, wiring design, raceway design specific to tray and conduit systems, lighting and grounding design and electrical installation details.
4. Understanding of engineering specifications with motors, transformers, switchgear, MCC’s, VFD’s, soft starters, and UPS systems.
5. Highly organized, self-motivated and able to handle multiple project tasks. Excellent presentation and written communication skills, time management and organizational skills are required.
6. Ability to work under the pressure of deadlines, be self-directed, exhibit good business judgment and the ability to handle confidential information appropriately.
7. PE license is preferred.
8. Proficient user of MS Office (Outlook, Word, Excel and Internet)
9. Compliance with client drug/alcohol and safety programs.

Benefits Offered:
1. Group health plan
2. Dental plan
3. Paid time off (PTO)
4. Short & long-term disability insurance
5. Life insurance
6. Section 125 Cafeteria plan
7. 401k retirement plan
8. Profit sharing pension plan
9. Relocation allowance
10. YMCA membership
11. On-site wellness coach
 
Job Number: FD-020418KS
Job Location: Wichita, KS
Rate: $BOE/HR
Per Diem: No - Local Candidates Only
Overtime: Possible
Duration: Perm Job Offer
Start Date: 03/26/2018
Input Date: 03/01/2018
Last Updated: 03/21/2018
Firm Name: FOSTER DESIGN INC
Attention: Recruiter
Address: 200 W DOUGLAS AVE STE 110
City, State: WICHITA, KS 67202
Phone: 316/832-9700
800 Phone: 800/345-3394
Fax Phone: 316/832-9357
Website: www.fosterdes.com

Electrical Engineer 2 - O/M - LA

Description:
Chipton-Ross is seeking a Electrical Engineer 2 for an opening in Avondale, LA.

RESPONSIBILITIES:
Candidate will be responsible for establishing, overseeing, and managing all activities related to assigned shipboard systems. Candidate will perform the following: Research, development, and design of electrical components, equipment, systems, and networks in accordance with all contractual requirements, military and commercial specifications; initiate procurement specifications; review and approve vendor proposals; review, comment on, adjudicate and approve vendor furnished information for translation into construction products; interface with vendors and Navy technical representatives; support vendor design reviews and testing; develop drawings and other documents IAW Mil-Specs and contract drawings; interface with other disciplines and departments to ensure a seamless integration of assigned systems into the shipboard environment; address and resolve technical issues, and make decisions on problems in his/her area of responsibility; support shipbuilding production department as required.

REQUIRED EXPERIENCE:
Bachelor's of Electrical Engineering with two years of engineering experience or Master's of Electrical Engineering with no prior experience, or similar degree background. . Previous shipbuilding experience is highly desired. A qualified candidate should be proficient in Microsoft Office applications and AutoCAD 2014.

ADDITIONAL EXPERIENCE:
It is preferred that the candidate be familiar with shipboard Interior Communications systems such as Switchboards, Telephone systems, Announcing, TV and Audio, Alarms, Indicating, etc. and have an understanding of the typical shipboard interfaces, interconnections, and integration requirements. Familiarity with electrical power distribution systems, control systems, and C4ISR systems is a plus. Current clearance is also a plus.

EDUCATION:
Bachelor's of Electrical Engineering

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 155942
Job Location: Avondale, LA
Rate: $42 to $46.00 DOE
Duration: 1 year
Input Date: 06/03/2016
Last Updated: 09/21/2018
Firm Name: CHIPTON ROSS
Attention: Andrew Craft
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: acraft@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer II

Description:
Design power conversion circuitry potentially utilizing any standard power conversion topologies (non-isolated and isolated)
Architect circuit card assembly-level power schemes.
Utilize power conversion simulation programs like SIMPLIS to model converter design performance.
Utilize analysis tools like MathCAD to assess electrical design robustness of power circuitry.
Guide Electronic Computer-Aided Design (ECAD) personnel through PWB layout of power circuitry and technical drawing creation.
Perform high level thermal analyses of critical power components.
Design power converters to meet a set of requirements, sometimes defining those requirements.
Perform design work within the bounds of a given schedule, and sometimes define the schedule.
Present reviews of technical data to program leadership and technical staff.
Act as a liaison between program and functional management.

•Must have a Bachelor of Science in Electrical Engineering from an accredited University, with a minimum of 5 years of professional experience. •Must have professional design, analysis, and test experience with analog electronic design and analysis, including FET, BJT, and Op-amp circuits. Must have professional design, analysis, and test experience with linear converters, and any two of the following non-isolated converter topologies: buck, boost, buck-boost. Must also have design, analysis, and test experience with any one of the following isolated converter topologies: flyback, half-bridge, full-bridge, push-pull. •Must have professional experience with performing circuit card assembly-level power architecture trades. •Must have professional experience using PSPICE (or similar), and other circuit simulation tools. •Must have professional experience with analysis tools such as MathCAD. •Must have professional experience with guiding ECAD folks through layout (power focus). •Must have professional experience with thermal concerns of electronics. •Must have professional experience with taking, analyzing, and correcting Bode plots. •Must be a self-starter, a quick learner, and be able to function in a dynamic environment, and have good time management skills. •Must have strong teaming skills, and good communication skills. •Must be customer-focused.
 
Job Number: 8107285
Job Location: Tucson, AZ
Rate: $50-52HR
Duration: 12+ Months
Start Date: ASAP
Input Date: 03/07/2018
Last Updated: 03/19/2018
Firm Name: MIDCOM CORPORATION
Attention: Maurice Bradford
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer II / ability to obtain secret clearance AZ

Description:
Electrical Engineer II (8107285) - Tucson AZ
0-18 month(s) $50-52HR


Design power conversion circuitry potentially utilizing any standard power conversion topologies (non-isolated and isolated)
Architect circuit card assembly-level power schemes.
Utilize power conversion simulation programs like SIMPLIS to model converter design performance.
Utilize analysis tools like MathCAD to assess electrical design robustness of power circuitry.
Guide Electronic Computer-Aided Design (ECAD) personnel through PWB layout of power circuitry and technical drawing creation.
Perform high level thermal analyses of critical power components.
Design power converters to meet a set of requirements, sometimes defining those requirements.
Perform design work within the bounds of a given schedule, and sometimes define the schedule.
Present reviews of technical data to program leadership and technical staff.
Act as a liaison between program and functional management.

Must be a U.S. citizen with the ability to obtain a Department of Defense issued Secret Security Clearance.

•Must have a Bachelor of Science in Electrical Engineering from an accredited University, with a minimum of 5 years of professional experience.
•Must have professional design, analysis, and test experience with analog electronic design and analysis, including FET, BJT, and Op-amp circuits. Must have professional design, analysis, and test experience with linear converters, and any two of the following non-isolated converter topologies: buck, boost, buck-boost. Must also have design, analysis, and test experience with any one of the following isolated converter topologies: flyback, half-bridge, full-bridge, push-pull.
•Must have professional experience with performing circuit card assembly-level power architecture trades.
•Must have professional experience using PSPICE (or similar), and other circuit simulation tools.
•Must have professional experience with analysis tools such as MathCAD.
•Must have professional experience with guiding ECAD folks through layout (power focus).
•Must have professional experience with thermal concerns of electronics.
•Must have professional experience with taking, analyzing, and correcting Bode plots.
•Must be a self-starter, a quick learner, and be able to function in a dynamic environment, and have good time management skills.
•Must have strong teaming skills, and good communication skills.
•Must be customer-focused.
 
Job Number: MB-R8107285
Job Location: Tucson, AZ
Rate: 50-52/hr max
Per Diem: no
Duration: 18 months
Input Date: 06/14/2018
Last Updated: 06/22/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer/Technician - Level 3

Description:
Location: Centennial, CO
Rate: DOE
Duration: 1 year contract
Overtime: Exempt

****MUST be a U.S. Citizen****

Job Requirements:
Minimum 2 years of experience with the following electrical technician tasks:
- Assemble and modify equipment cabinets and racks
- Route wire and cable materials in harness bundles and terminate in pin and socket contacts/connectors associated with equipment prototype mockups
- Inventory ULA and vendor supplied material available and arriving on-site vs kit lists and material requirements
- Assemble/repair non-production (development) printed circuit boards and other non-production soldered items
- Build and/or modify hardware using machine shop equipment (e.g. drill press, grinding wheel, band saw)
- Conduct and support testing activities, e.g. electrical continuity, isolation, and bonding
- Read and understand basic electrical schematics and wire lists.
 
Job Number: 8722
Job Location: Centennial, CO
Rate: DOE
Per Diem: Split Possible
Overtime: Exempt
Duration: 1 yr
Start Date: ASAP
Input Date: 03/08/2018
Last Updated: 04/13/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Electrical Engineers

Description:
Vehicle systems integration
 
Job Location: OH/MI/IN
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: jmac@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Harness Installation Engineer - Special Missions

Description:
Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Duration: Long Term Contract (1-4 years)
Shift:1st Shift


Unique Skills:
Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project. Aerospace experience is required. Knowledge of Catia V5 is required. Candidate must be able to design wire harness assemblies and installations utilizing the Catia V5 Electrical and Sheet Metal Work Benches. Must have intimate knowledge of an ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements, while meeting all installation and maintainability requirements. Candidate must possess knowledge of regulatory guidance material relative to aircraft harness design. Excellent verbal and written communication skills, and computer skills (Catia V5, Catia V4, PC/MS Office) are required.

Job description:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

Principal Duties and Responsibilities:
Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned
 
Job Number: 7876
Job Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 03/09/2018
Last Updated: 03/12/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Harness Installation Engineer-Special Missions

Description:
UNIQUE SKILLS
Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project. Aerospace experience is required. Knowledge of Catia V5 is required. Candidate must be able to design wire harness assemblies and installations utilizing the Catia V5 Electrical and Sheet Metal Work Benches. Must have intimate knowledge of an ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements, while meeting all installation and maintainability requirements. Candidate must possess knowledge of regulatory guidance material relative to aircraft harness design. Excellent verbal and written communication skills, and computer skills (Catia V5, Catia V4, PC/MS Office) are required.

JOB DESCRIPTION
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs. in the specific technical discipline or 10 yrs. broad engineering experience in several technical disciplines with Bachelors, or 3 yrs. in the specific technical discipline with Masters, or 1 yr. in the specific technical discipline with PhD. Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Client products and services

PRINCIPAL DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

ADDITIONAL FUNCTIONS
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned
 
Job Number: 17-783-115282
Job Location: Southeast
Rate: $58.00 to $63.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 07/11/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Power Systems Engineer

Description:
The tasks associated with the support of the Backup Electrical Power System as follows:

• System requirements analysis and traceability
• Support of the generation of System cert artifacts
• System test procedure development, review, and execution
• Systems Problem Report generation, resolution, and verification
• System verification/test data analysis
• Work on-site in Dayton, OH under the direction of the Systems Engineering Project Managers (EPMs)
• Work multiple shift coverage when in support of the test execution in the power lab, including rotating weekend and off-shift coverage

Skillset requirements:
• Experience with Systems Engineering of power generation systems (preferably in the commercial aerospace industry)
• Experience with System Verification of aviation electrical power systems
• Experience with electrical power system lab equipment (drive stands, high power load banks, data acquisition systems, etc.)
• Strong communication/planning/interpersonal skills

Number of resources required:
• Four (4) resources with an electrical engineering background (preferably with high power electronics)
 
Job Number: A001
Job Location: Dayton, OH
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 11 months
Start Date: 3/12/2018
Input Date: 02/27/2018
Last Updated: 03/09/2018
Firm Name: BENTLEY GLOBAL RESOURCES LLC
Attention: Johnathon Williams
Address: 3937 TAMPA RD STE 3
City, State: OLDSMAR, FL 34677-3115
Phone: 813/854-1500
Fax Phone: 813/854-1605
Website: www.bentleygr.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Power-Loads Engineering Contractor - Special Missions

Description:
UNIQUE SKILLS
Required Experience in the following:
• Electrical Power Generation, control and indicating
• Power Distribution, control and indicating
• Electrical Load Analysis

JOB DESCRIPTION
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs. in the specific technical discipline or 10 yrs. broad engineering experience in several technical disciplines with Bachelors, or 3 yrs. in the specific technical discipline with Masters, or 1 yr. in the specific technical discipline with PhD. Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of client products and services

PRINCIPAL DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

ADDITIONAL FUNCTIONS
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

OTHER REQUIREMENTS
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
Desired Experience in the following:
• Working Knowledge ARP4754 and CFR 25
• Project Management Skills/Experience
• Configuration change management
 
Job Number: 17-742-103561
Job Location: Southeast
Rate: $58.00 to $63.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 07/11/2018
Last Updated: 07/20/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Systems Design & Analysis Engineers III - OK

Description:
Active Secret Clearance, NOT REQUIRED to start.

Our Aerospace Client is currently seeking an experienced Electrical systems Designers to perform Electrical Loads Analysis and power systems modification. This
includes Airborne Surveillance Command and Control aircraft from around the world including, NATO, French, Saudi, US, UK, Japan AWACS, B-52 Bombers, C32/C40 VIP transports, , the E-4 National Airborne Operations Center, KC-767
International Tankers and VC-25 presidential transport.
This position is located in Oklahoma City, Oklahoma
Job Responsibilities will include but not be limited to:
- Develop and document electrical load analysis based upon system design.
- Provide coordination memos with impact analysis for systems design changes.
- Present results of analysis at customer design reviews (PDR, CDR)
- Publish reports detailing the aircraft electrical load and bus capability.
- Utilize existing software to complete Electrical Load Analysis
- Direct a team of engineers providing individual direction.
- Leverage existing tools and help develop a path forward for a common tool for ELA.
- Works on unusually complex technical problems and provides solutions which are highly innovative and ingenious.
- Develops advanced technical ideas and guides their development into final product
- Serves as organization spokesperson on advanced projects and programs. Acts as advisor to management and
customers on advanced technical research studies.

Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

Previous experience with aircraft power distribution and architecture desired.

ACS Group (formerly 'Comforce')
 
Job Number: EEOK
Job Location: Oklahoma City, OK
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 9+ Months
Start Date: ASAP
Input Date: 01/09/2018
Last Updated: 03/09/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Systems Engineer

Description:
Electrical Systems Engineer

Location: Savannah, GA
Pay Rate: $58/hr - $63/hr
Duration: Long Term Contract
Shift: First

Unique Skills:
Aircraft power / electrical / avionic systems design, integration and implementation. (design, certification and system support)

Job description:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

Principal Duties and Responsibilities/Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 7677
Job Location: Savannah, GA
Rate: 58.00-63.00
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 03/07/2018
Last Updated: 05/17/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Systems Engineer

Description:
Unique Skills:
• Avionics System Integration Experience Require, Honeywell Epic System Experience Preferred

Position Purpose:
• Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of products and services

Education and Experience Requirements:
• Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Essential Functions:
• Contributes to planning, developing and coordinating of important engineering projects
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
• Acts as liaison with representatives outside of the assigned group/area
• Actively works to improve daily processes and ensures all work meets customer requirements
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
• Performs other duties as assigned
• Advanced degree in engineering related field preferred
• The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 24-215
Job Location: Savannah, GA
Rate: $58 - $63
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 02/22/2018
Last Updated: 05/17/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Technical Designers - UGNX

Description:
Responsible for electronic/electrical component packaging, fixture/test station design. This will include the electronic/electrical/mechanical design process from detailed parts to complex mechanical assemblies, by selecting components, preparing design layouts, modifying existing designs and resolving complex design discrepancies to satisfy both customers and producibility requirements. This person will work closely with electrical engineering groups throughout all design phases and the fabrication teams during the build process.

o 10 + years of experience in mechanical design, including mechanisms, structures and/or electronic packaging.
o Working knowledge of 3-D solid modeling
o Experience creating drawings using Computer Aided Draft systems, specifically Unigraphics NX8
 
Job Number: BO-MO-ELE
Job Location: St. Louis, MO
Rate: $51.00
Per Diem: Possible
Overtime: Possible
Duration: 10 Months+
Start Date: ASAP
Input Date: 03/01/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

Electrical Technician

Description:
One year in length
Maximum Hourly pay rate $18.00
Tests and troubleshoots electronic products using standard and specialized test equipment. 

1. Troubleshoots electronic products to sub-assembly and component level utilizing schematics and standard troubleshooting practices and procedures 
2. Sets up test equipment and tests electronic products using established test procedures and schematics
3. Provides technical guidance to assemblers and re-work assemblers 
4. Performs cross functional tasks within fairly similar situations resulting in standardized but not identical outcomes

5. Knowledge of the operation and use of electronic production test equipment and hand assembly tools used in a high tech surface mount & through-hole technology manufacturing and production environment
6. Knowledge of advanced electronic test and troubleshooting techniques to component level.
7. Uses product test and measurement equipment, digital/analog voltmeters, oscilloscopes, hi-pot meters, power supplies, and automatic and standard test equipment, etc.
8. Recommends and/or proposes process improvements 
8. Ensures that all relevant quality information/feedback is provided 
10. Utilizes written or visual instructions involving use of quantitative information from specifications, schematics, graphs, pictures, gages, etc.
11. Provides written and/or oral communications concerning a variety of situations following test, troubleshooting, examinations, etc.
12. Keeps workstation, tools and equipment in a neat and orderly manner 
13. Understands and complies with all Company, safety rules and regulations

Requirements/Knowledge: 

v Education Required:
o Associate degree in Electronics (2 year) or certified program (18 mos.) plus 1 year of experience

v Experience 
o 1-3 years of electronics related experience

v Skill Level Required: 
o Skills required in maintaining close specifications using tools & gages, schematics and a variety of electronic equipment 

o Should have a high level of electrical and mechanical aptitude and analytical skills
o Ability to interpret drawing and specifications
o Basic computer skills
o Knowledge of manufacturing processes and how to effectively troubleshoot problems
o Should possess dexterity skills, good hand & eye coordination 
o Willing and able to take and pass basic electronics test 

Desired Qualifications:

v Past experience in a manufacturing environment
v Past experience in a self-directed teaming environment
v Lean manufacturing knowledge
v Understanding of IPC-A-610 standards
 

 
Job Number: 1710063131
Job Location: Bohemia, NY
Duration: 12 months
Input Date: 01/31/2017
Last Updated: 09/21/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Eric Khassanov
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002G9j8AAC&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Wire Designers - Many Needed

Description:
Develops, maintains and releases electrical/mechanical drawings, systems designs or engineering documentation and data by applying company, industry and governmental standards. Using design tools prepares documentation and incorporates design changes.

Email resumes to: mmccarthy@pdstech.com
 
Job Number: BO-ELE-OK
Job Location: Oklahoma City, OK
Rate: $50.70
Per Diem: Possible
Overtime: Possible
Duration: 9 Months+
Start Date: ASAP
Input Date: 02/14/2018
Last Updated: 02/26/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Wiring Design Engineer

Description:
This position is for an engineer that will perform wiring design and integration tasks associated with the Electrical Systems. This position will report directly to the Manager, Electrical Wiring Design.

Experience:
Seeking design engineers with experience in the creation and maintenance of aircraft systems wiring diagrams, parts lists, and electrical harness drawings. This involves detailed understanding and specification of aircraft electrical harness components selection, harness design requirements, harness level system separation, and system integration at the wiring level.
The potential candidate must be capable of working independently, must possess excellent coordination skills, and must work well in a multi-functional team environment.

Duties and Responsibilities:
Background and demonstrated ability is required in the technical areas listed below.

­ Electrical Wiring and Harness Design
o Wiring standards and ‘best practice’ design
o Wire gauge and type consideration (shield coverage, over-braid, wire twists/foot, temperature, bend radius, insulation, sleeves, etc.)
o Connector and backshell qualification and selection (EMI, high temperature, high vibration, environmentally sealed/hermetic, connector material compatibility, pin selection, etc.)
o Miscellaneous electrical harness hardware selection (splices, solder sleeves, grounding blocks, tie wraps, terminal lugs, etc)
o Development of configuration managed, electrical harness design packages
o Parts lists, bill of materials, parts and standards callout
o Fabrication techniques for integrated wiring assemblies
o Cost, weight, and schedule trade-offs
­ Wire Diagram and harness drawing generation
o Interpretation of system interface control data to conceptual schematics
o Evolution of conceptual schematics into aircraft wiring information
o Use of wiring design tool to generate wiring diagrams and harness drawings
­ System integration as it applies to complex wiring assemblies
o Good overall working knowledge of aircraft electrical/electronic systems
o Implementation of wiring and harness level system separation to avoid common cause failure modes, including electrical signal and power separation
o Databus and digital equipment interface considerations

Education, Work Experience, Certification and/or Licensure:
­ BSEE or equivalent and minimum of 5 years applicable work experience
­ Experience with IGE-XAO, Mentor Graphics, or similar wiring design tool
­ Good working knowledge with Teamcenter, Microsoft Office suite, and SAP
­ Experience with Catia V5 is a plus
­ Experience with electrical harness routing and installation requirements is a plus
 
Job Number: 28-020
Job Location: Greensboro, NC
Rate: $45-$50
Per Diem: Yes
Overtime: Yes
Duration: 1 year plus
Start Date: ASAP
Input Date: 02/28/2018
Last Updated: 05/03/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical/Aircraft Cabin Interiors & Systems Engineering Contractor

Description:
Electrical/Aircraft Cabin Interiors & Systems Engineer

Location: Savannah, GA
Pay Rate: $58/hr - $63/hr
Duration: Long Term Contract
Shift: First

Unique Skills:
Ideal Candidates will have electrical engineering experience with Aircraft Cabin Interiors and Systems to include but not limited to:
- Cabin Management System
- Cabin Entertainment System
- Cabin Lighting
- Cabin Switch Controls
- Telephone System
- Satellite communications
- Water System
- Waste System
- EWIS
- Cabin interior monuments
- Seats

Education:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area.

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 7428
Job Location: Savannah, GA
Rate: $58-$63
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 03/07/2018
Last Updated: 04/24/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical/Electronic Design & Analysis Engineer IV - Digital/Analog - (OK)

Description:
SEVERAL OPENINGS IN OKLAHOMA CITY, OK.

Leads analysis of customer and system requirements and development of architectural approaches and detailed specifications for various electronic products. Leads development of high-level and detailed designs consistent with requirements and specifications. Leads reviews of testing and analysis activity to assure compliance to requirements. Identifies, tracks and statuses technical performance measures to measure progress and ensure compliance with requirements. Leads activities in support of Supplier Management with make/buy recommendations and other technical services. Coordinates engineering support throughout the lifecycle of the product. Plans research projects to develop concepts for future product designs to meet projected requirements.

Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

ACS Group (formerly 'Comforce')
 
Job Number: EEOK
Job Location: Oklahoma City, OK
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 12+ Months
Start Date: ASAP
Input Date: 01/29/2018
Last Updated: 03/09/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electro-Mechanical Design Engineer

Description:
Location: Orlando, FL
Rate: $50.00 - $55.00/HR
Duration: 6 month contract position
Schedule: 9/80

**Candidates must be U.S. Citizens**

Duties:
- An Electromechanical Design Engineer is responsible for the design, documentation and production floor support of hardware (missile electronics, missile electrical cabling, airborne support equipment, ground support equipment and test sets.
- Additional duties include investigation of discrepant hardware and test anomalies.

Skills:
Required:
- Design experience with electrical cables, test sets, breakout boxes, 19” support equipment rack design
- Proficiency with Creo Parametric 2.0 Cabling and Intralink.
- Proficiency with ASME Y14.5M-1994 and generating detailed engineering drawings.
- Proficiency with reading schematics for electrical cable assemblies in order to define and select connectors, backshells, splices, wiring, etc.
- Basic computer skills and a working knowledge of Microsoft Office products (Word and Excel)
- Compliance to quality and safety policies at all times!
- Must be a US Citizen
- Physical Requirements – This work requires delicate handling, reaching, light lifting and may require a combination of sitting and standing as well as walking between test locations and occasional use of small step-ladders.

Desired:
- Experience with design of flexible and semi-rigid RF cables

Education:
- Must have at minimum a Bachelor of Science degree in an Engineering related discipline.
 
Job Number: 8527
Job Location: Orlando, FL
Rate: $50.00 - $55.00/HR
Per Diem: Per Diem Split Possible
Overtime: Possible
Duration: 6 mos
Input Date: 03/15/2018
Last Updated: 03/29/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Electro-Mechanical Design Engineer

Description:
Electro-Mechanical Design Engineer
PDS is looking for experienced Electro-Mechanical Engineers in the Phoenix area
Duties
Electro-Mechanical Design Engineer  Individual will be responsible for the hardware development for missile, satellite  and / or fire control electronics and general packaging support. Activity will require: 

Cross functional coordination to complete hardware design effort to support hardware integration for the designed weapon system. 

Research, development and design of components, equipment and networks for military applications.

Basic Qualifications

- Must be able to obtain a security clearance 
- Candidate must have a Bachelor’s degree from an accredited college in a related discipline with a minimum 3.0 GPA
- 3D modeling tools (example would be Pro-E/CREO, Catia, Solidworks or similar)

Desired skills

- Working knowledge of harness design and development.
- Working knowledge of printed wiring board and surface mount technologies is desired.
- Exposure to, or experience with, Pro/Cable for harness development and Cadence for PWB design is a plus.
- Working knowledge of military hardware specifications is desired.
- Desired design experience includes chassis, electro-mechanical assembly, electrical cable and/or network design. Able to interpret electrical schematics for harness development a plus.

 

 



 
Job Number: 1710065209
Job Location: Phoenix, AZ
Duration: 12 months
Input Date: 03/14/2017
Last Updated: 09/21/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Terry Brooke
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000021WJmAAM&URLSource=cjhunter

Electro-Mechanical Design Engineer

Description:
Electro-Mechanical Design Engineer
PDS is looking for experienced Electro-Mechanical Engineers in the Los Angeles area
Duties
Electro-Mechanical Design Engineer  Individual will be responsible for the hardware development for missile, satellite  and / or fire control electronics and general packaging support. Activity will require: 

Cross functional coordination to complete hardware design effort to support hardware integration for the designed weapon system. 

Research, development and design of components, equipment and networks for military applications.

Basic Qualifications

- Must be able to obtain a security clearance 
- Candidate must have a Bachelor’s degree from an accredited college in a related discipline with a minimum 3.0 GPA
- 3D modeling tools (example would be Pro-E/CREO, Catia, Solidworks or similar)

Desired skills

- Working knowledge of harness design and development.
- Working knowledge of printed wiring board and surface mount technologies is desired.
- Exposure to, or experience with, Pro/Cable for harness development and Cadence for PWB design is a plus.
- Working knowledge of military hardware specifications is desired.
- Desired design experience includes chassis, electro-mechanical assembly, electrical cable and/or network design. Able to interpret electrical schematics for harness development a plus.

 

 



 
Job Number: 1710065207
Job Location: Los Angeles, CA
Duration: 12 months
Input Date: 03/14/2017
Last Updated: 09/21/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Karla Pelonis
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000021WJcAAM&URLSource=cjhunter

Electro-Mechanical Design Engineer

Description:
Electro-Mechanical Design Engineer
PDS is looking for experienced Electro-Mechanical Engineers in the San Jose area
Duties
Electro-Mechanical Design Engineer  Individual will be responsible for the hardware development for missile, satellite  and / or fire control electronics and general packaging support. Activity will require: 

Cross functional coordination to complete hardware design effort to support hardware integration for the designed weapon system. 

Research, development and design of components, equipment and networks for military applications.

Basic Qualifications

- Must be able to obtain a security clearance 
- Candidate must have a Bachelor’s degree from an accredited college in a related discipline with a minimum 3.0 GPA
- 3D modeling tools (example would be Pro-E/CREO, Catia, Solidworks or similar)

Desired skills

- Working knowledge of harness design and development.
- Working knowledge of printed wiring board and surface mount technologies is desired.
- Exposure to, or experience with, Pro/Cable for harness development and Cadence for PWB design is a plus.
- Working knowledge of military hardware specifications is desired.
- Desired design experience includes chassis, electro-mechanical assembly, electrical cable and/or network design. Able to interpret electrical schematics for harness development a plus.

 

 



 
Job Number: 1710065206
Job Location: San Jose, CA
Duration: 12 months
Input Date: 03/14/2017
Last Updated: 09/21/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Karla Pelonis
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000021WJXAA2&URLSource=cjhunter

Electro-Mechanical Design Engineer

Description:
Electro-Mechanical Design Engineer
PDS is looking for experienced Electro-Mechanical Engineers in the San Diego area
Duties
Electro-Mechanical Design Engineer  Individual will be responsible for the hardware development for missile, satellite  and / or fire control electronics and general packaging support. Activity will require: 

Cross functional coordination to complete hardware design effort to support hardware integration for the designed weapon system. 

Research, development and design of components, equipment and networks for military applications.

Basic Qualifications

- Must be able to obtain a security clearance 
- Candidate must have a Bachelor’s degree from an accredited college in a related discipline with a minimum 3.0 GPA
- 3D modeling tools (example would be Pro-E/CREO, Catia, Solidworks or similar)

Desired skills

- Working knowledge of harness design and development.
- Working knowledge of printed wiring board and surface mount technologies is desired.
- Exposure to, or experience with, Pro/Cable for harness development and Cadence for PWB design is a plus.
- Working knowledge of military hardware specifications is desired.
- Desired design experience includes chassis, electro-mechanical assembly, electrical cable and/or network design. Able to interpret electrical schematics for harness development a plus.

 

 



 
Job Number: 1710065205
Job Location: San Diego, CA
Duration: 12 months
Input Date: 03/14/2017
Last Updated: 09/21/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Karla Pelonis
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000021WJIAA2&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electromechanical Design Engineer FL

Description:
7652762/161127
Job Title: Electromechanical Design Engineer

Number of Positions: 3

Remaining Positions: 3

Duties:
** Candidates must be U.S. Citizens **



An Electromechanical Design Engineer is responsible for the design, documentation and production floor support of hardware (missile electronics, missile electrical cabling, airborne support equipment, ground support equipment and test sets.


Additional duties include investigation of discrepant hardware and test anomalies.
Skills:
Required:

Design experience with electrical cables, test sets, breakout boxes, 19” support equipment rack design
Proficiency with Creo Parametric 2.0 Cabling and Intralink.
Proficiency with ASME Y14.5M-1994 and generating detailed engineering drawings.
Proficiency with reading schematics for electrical cable assemblies in order to define and select connectors, backshells, splices, wiring, etc.
Basic computer skills and a working knowledge of Microsoft Office products (Word and Excel)
Compliance to quality and safety policies at all times!
Must be a US Citizen
Physical Requirements – This work requires delicate handling, reaching, light lifting and may require a combination of sitting and standing as well as walking between test locations and occasional use of small step-ladders.
Desired:

Experience with design of flexible and semi-rigid RF cables
Education:
Must have at minimum a Bachelor of Science degree in an Engineering related discipline.


Skills:
Required
DESIGN ENGINEERCREOCABLINGASME/ANSIREADING SCHEMATICS
Additional
EXCELMICROSOFT OFFICEWORDANALOG SILICONAPQPDOCUMENTATIONGROUND SUPPORT EQUIPMENTMISSILEMS OFFICEPARAMETRICRACK DESIGNRFSCHEMATICSWIRING

State/Province: Florida
City/Town: Orlando

Start Date: 01/29/2018 Hours Per Week: 40.00
Est. End Date: 07/27/2018 Hours Per Day: 8.00
Schedule Notes: 9/80 Days Per Week: 5.00
 
Job Number: MB-7652762
Job Location: Orlando, FL
Rate: 55/hr max
Duration: 6 month contract
Input Date: 03/23/2018
Last Updated: 04/04/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronic Design & Analysis Engineer II & III & IV - (CA)

Description:
SEVERAL OPENINGS IN THE HUNTINGTON BEACH, CA AREA.

- Developing electronic and electrical flight control system solutions
- Participating in modification projects for flight control hardware and software designs based on platform requirements
- Executing systems and software testing to verify operational and functional requirements
- Managing hardware/software suppliers' performance to ensure customer requirements are met
- Supporting resolution of product integration & field operation issues
- Researching new technologies for potential application to C-17
- Developing solutions to technical problems of safety of flight scope and impact
- Applying solid engineering, scientific, and common sense principles in the context of organizational dynamics and real world cost & schedule targets
- Integrating into teams and collaborating with multiple engineering disciplines in solving moderately complex problems concerning fielded airborne avionics and flight control (AFC) systems, involving both hardware and software.
- Participate in full lifecycle projects to develop functional and interface requirements; design hardware, software and interface specifications; test and validate to ensure system designs meet operational and functional requirements; assist in monitoring supplier performance to ensure system integration and compliance with requirements
- Work with customers and their Boeing representatives to obtain feedback for product enhancements and corrective actions.

Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

ACS Group (formerly 'Comforce')
 
Job Number: EEhb
Job Location: Huntington Beach, CA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 01/26/2018
Last Updated: 03/09/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

Electronic Troubleshooter

Description:
Tests and troubleshoots electronic products using standard and specialized test equipment. 

1. Troubleshoots electronic products to sub-assembly and component level utilizing schematics and standard troubleshooting practices and procedures 
2. Sets up test equipment and tests electronic products using established test procedures and schematics
3. Provides technical guidance to assemblers and re-work assemblers 
4. Performs cross functional tasks within fairly similar situations resulting in standardized but not identical outcomes

5. Knowledge of the operation and use of electronic production test equipment and hand assembly tools used in a high tech surface mount & through-hole technology manufacturing and production environment
6. Knowledge of advanced electronic test and troubleshooting techniques to component level.
7. Uses product test and measurement equipment, digital/analog voltmeters, oscilloscopes, hi-pot meters, power supplies, and automatic and standard test equipment, etc.
8. Recommends and/or proposes process improvements 
8. Ensures that all relevant quality information/feedback is provided 
10. Utilizes written or visual instructions involving use of quantitative information from specifications, schematics, graphs, pictures, gages, etc.
11. Provides written and/or oral communications concerning a variety of situations following test, troubleshooting, examinations, etc.
12. Keeps workstation, tools and equipment in a neat and orderly manner 
13. Understands and complies with all Company, safety rules and regulations

Requirements/Knowledge: 

v Education Required:
o Associate degree in Electronics (2 year) or certified program (18 mos.) plus 1 year of experience

v Experience 
o 1-3 years of electronics related experience

v Skill Level Required: 
o Skills required in maintaining close specifications using tools & gages, schematics and a variety of electronic equipment 

o Should have a high level of electrical and mechanical aptitude and analytical skills
o Ability to interpret drawing and specifications
o Basic computer skills
o Knowledge of manufacturing processes and how to effectively troubleshoot problems
o Should possess dexterity skills, good hand & eye coordination 
o Willing and able to take and pass basic electronics test 

Desired Qualifications:

v Past experience in a manufacturing environment
v Past experience in a self-directed teaming environment
v Lean manufacturing knowledge
v Understanding of IPC-A-610 standards
 
Tests and troubleshoots electronic products using standard and specialized test equipment. 

1. Troubleshoots electronic products to sub-assembly and component level utilizing schematics and standard troubleshooting practices and procedures 
2. Sets up test equipment and tests electronic products using established test procedures and schematics
3. Provides technical guidance to assemblers and re-work assemblers 
4. Performs cross functional tasks within fairly similar situations resulting in standardized but not identical outcomes

5. Knowledge of the operation and use of electronic production test equipment and hand assembly tools used in a high tech surface mount & through-hole technology manufacturing and production environment
6. Knowledge of advanced electronic test and troubleshooting techniques to component level.
7. Uses product test and measurement equipment, digital/analog voltmeters, oscilloscopes, hi-pot meters, power supplies, and automatic and standard test equipment, etc.
8. Recommends and/or proposes process improvements 
8. Ensures that all relevant quality information/feedback is provided 
10. Utilizes written or visual instructions involving use of quantitative information from specifications, schematics, graphs, pictures, gages, etc.
11. Provides written and/or oral communications concerning a variety of situations following test, troubleshooting, examinations, etc.
12. Keeps workstation, tools and equipment in a neat and orderly manner 
13. Understands and complies with all Company, safety rules and regulations

Requirements/Knowledge: 

v Education Required:
o Associate degree in Electronics (2 year) or certified program (18 mos.) plus 1 year of experience

v Experience 
o 1-3 years of electronics related experience

v Skill Level Required: 
o Skills required in maintaining close specifications using tools & gages, schematics and a variety of electronic equipment 

o Should have a high level of electrical and mechanical aptitude and analytical skills
o Ability to interpret drawing and specifications
o Basic computer skills
o Knowledge of manufacturing processes and how to effectively troubleshoot problems
o Should possess dexterity skills, good hand & eye coordination 
o Willing and able to take and pass basic electronics test 

Desired Qualifications:

v Past experience in a manufacturing environment
v Past experience in a self-directed teaming environment
v Lean manufacturing knowledge
v Understanding of IPC-A-610 standards
 
 
Job Number: 1710066458
Job Location: Bohemia, NY
Duration: 12 months
Input Date: 04/07/2017
Last Updated: 09/21/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Eric Khassanov
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000021ioWAAQ&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronics Hardware Engineer || Electrical Engineer

Description:
Please share updated resume at ravi@iconma.com


Electronics Hardware Engineer||Electrical Engineer

Location: Milwaukee, WI
Position type: W2 Contract

NOTE:LOOKING SOMEONE WITH EXTENSIVE EXPERIENCE IN DESIGNING CIRCUITS TO CONTROL DC BRUSH AND BRUSHLESS MOTORS.

Description:
Principal Duties:
- Participates in the development and/or improvement of new and existing products for design change, cost reductions, warranty improvements, and manufacturability.
- Works with minimal direction to create and develop product concepts, and oversees the development to meet time and budgetary constraints.
- Conducts engineering qualification tests on the product including coordinating with outside agencies to ensure compliance.
- Takes initiative to recommend projects, product improvements or cost reductions.
- Performs tradeoff between implementation, schedule, cost and resource constraints and recommend alternatives.
- Provides technical feedback, input and consultation to other departments in design or implementation activities.
- Utilizes CAD systems as related to job.
- Utilizes software application programs such as Microsoft Office, Mentor Graphics Expedition, etc.
- Handles multiple complex or multi-activity tasks simultaneously. Has effective time management skills so that high priority tasks are completed as planned.
- Other duties as assigned.

Requirements:
- Bachelor Degree in Electrical Engineering or a closely related discipline. Master degree preferred.
- Minimum 5 years, preferred 10 years, of experience in product design or engineering experience. Advanced skills, additional education and exceptional performance may alter this requirement.
- Able to apply fundamental engineering theories, mathematics, mechanics, and physical science concepts to the job.
- Experience with electrical schematic capture, PCB layout, 3D CAD modeling, parts database structures, BOM structures, and engineering change management.
- Preferred experience with Mentor Graphics Expedition, Mentor Graphics Valor, and Windchill/Creo.
- Preferred experience in the fields of electrical (120/230Vac), electronic, mechatronics, and electro-mechanical design.
- Preferred experience designing circuits to control DC brush and brushless motors.
- Preferred experience with EMC design techniques.
- Preferred experience designing for regulatory compliance of UL, CE, and other global standards.
- Knowledge of manufacturing processes and limitations to assure conformance of design and fabrication of product.
- Able to obtain and interpret datasheets for electrical and control components, and determine electrical and mechanical requirements.
- Able to proficiently use the tools or materials required to perform typical assigned duties.
- Demonstrated ability to work in a team environment, good written and oral communications skills, flexibility and adaptability to changing situations.
- Preferred experience interfacing with global manufacturing facilities.
- Ability to work independently, as well as direct the work of others.
- High attention to detail and solid organizational skills.
- Possess a professional appearance and positive work attitude, in accordance with work area and company policies.
 
Job Number: 18-02724
Job Location: Milwaukee,, WI
Input Date: 02/21/2018
Last Updated: 02/23/2018
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/321-3508
800 Phone: 855/686-4768
Website: www.iconma.com

Electronics Technician

Description:
Chipton-Ross is seeking a Electronics Technician in Santa Barbara, CA.

Description
Provides engineering hardware fabrication support, troubleshooting, testing and basic Laboratory operations responsibility. These responsibilities will include fabrication of electronic/electrical chassis' and mechanical rack fabrication using development engineering drawings. Candidate must be capable of working independently, discussing technical issues with customers and working with vendors.

Skill/Experience/Education
Mandatory:
Integrated Circuit Layout Technician. SBF is seeking an experienced integrated circuit technician to help advance the state of the art in infrared and visible imager readout integrated circuits (ROICs). Significant experience with physical layout of mixed signal VLSI CMOS transistor level designs is required. The selected candidate will perform silicon layout of analog and digital submicron transistor level designs in support of advanced infrared cameras and imagers. Designs include ultralow noise analog circuit blocks, low power analog to digital conversion, high speed multi GHz data transmission and serializers. MUST HAVE CMOS integrated circuit layout experience.

Desired:
Schematic capture, design verification and simulation.
 
Job Number: 165226
Job Location: Santa Barbara, CA
Rate: $DOE
Duration: 12 months
Input Date: 09/13/2017
Last Updated: 09/21/2018
Firm Name: CHIPTON ROSS
Attention: Brent Sizemore
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: bsizemore@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronics Technician - RF - HF - VHF - Microwave

Description:
Job Title: Manufacturing Electronics Technician

Location: Santa Rosa, CA 95403

Terms: Long Term Contract Employment (24 months)

Industry: Manufacturing of electronics test and measurement equipment and software. (RF / Microwave / Electronics).

Duties / Responsibilities / Experience:

Test, trouble-shoot, and build various high performance electronic products used by the telecommunication industry.
Technical support services supporting production, New Product Introduction (NPI's), older products; support parts used for the repair of customer products, help support the electrical repair of factory returned products, and occasionally will be required to help with the refurbishment of products.
Experience troubleshooting to the component level.
Solid experience and knowledge of analog and digital circuits and theory.
Specialized expertise and technical ability in Test and troubleshooting in support of the instrument products.
Providing multi-disciplinary support to NPI engineers and production to resolve a wide range of associated technical and design issues.
Working with Manufacturing and NPI to provide technical support in qualifying new designs and developing tools and fixtures.
Evaluates technical design tasks and determines actions required.
Solves complex problems requiring breadth/ depth of knowledge of technical design processes/ procedures, and many different technologies and tools.
Qualification Requirements:

Education: Certificate/AS/BS in Electronic Technology or Engineering.
Minimum 3 to 5 years related RF and Microwave test experience.
Proficient with Component level troubleshoot.
Extensive knowledge of operations and troubleshooting of test and measurement equipment.
Solid understanding of analog and digital circuits and theory.
 
Job Number: 382840
Job Location: SANTA ROSA, CA
Rate: OPEN
Per Diem: No
Overtime: Possible
Duration: 24 mos
Start Date: ASAP
Input Date: 03/26/2018
Firm Name: CDI CORPORATION
Attention: Kris Douglas
Address: 17177 PRESTON RD STE 300
City, State: DALLAS, TX 75248
Website: www.cdicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer

Description:
Major purpose:
• Developing embedded software (hardware layer to application layer) to meet specific system and hardware requirements
• Defining and developing custom hardware/software interfaces – Bare-Metal
• Debugging and integrating software on product hardware, including board bring-up
• Working with systems and electrical engineers to develop software requirements
• Developing and executing software unit and functional tests
• Assisting with design changes or software updates
• Collaborating with staff and other engineers to meet project milestones

Job Requirements:
• BS or MS degree in Computer/Electrical Engineering or Computer Science
• 3-7 years of experience in embedded software development
• Experience in C/C++ (with emphasis on real-time embedded)
• Experience with microcontroller (ARM, Microchip, AVR, or similar 16 and 32 bit) architectures
• Experience in embedded systems design with preemptive, multitasking real-time operating systems
• Experience with software configuration management tools, anomaly tracking tools, and peer review
• Hands-on debug skills with JTAG, simulators/emulators, logic analyzers, oscilloscopes, etc.
• Adequate knowledge of reading schematics and data sheets.
• Strong written and verbal communication skills
 
Job Number: 18-08288
Job Location: Londonderry, NH
Rate: $80-$90
Per Diem: No
Overtime: No
Duration: 6+ Month Contract
Start Date: ASAP
Input Date: 03/05/2018
Firm Name: NESCO RESOURCE
Attention: Sebastian Hernandez
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer 3

Description:
Engineer 3

Location: Savannah, GA
Pay Rate: $58/hr - $60/hr
Duration: Long Term Contract
Shift: Not specified

Unique Skills:
-The ideal candidate will perform cabin configuration engineering and will have a background in electro-mechanical design and/or integration.
-Understanding of aircraft mechanical component integration along with basic electrical integration and application is highly preferred.
-Position will generate build list configuration and certification strategy for a complete aircraft cabin interior installation.
-Knowledge of business jet cabin interiors is highly desired.

Education and Experience Requirements:
Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Five (5) yrs in specific technical discipline or ten (10) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

Principle Duties and Responsibilities/Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering related field preferred. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 8162
Job Location: Savannah, GA
Rate: 58-60
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 03/07/2018
Last Updated: 03/14/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer Electromechanical - 3 / active secret preferred / CREO / electronic packaging CA

Description:
1631
Engineer Electromechanical - 3 (Job Number: 18002041)

Number of Openings: 1

Location(s): United States-California-Redondo Beach


Shift: 1st Shift

Target Start Date: Mar 19, 2018

Target End Date: Mar 15, 2019

Pay Rate: $58/hr. - $60/hr.

Work Week: 9/80

Location: Redondo Beach, CA

Duration: 1 year

The responsibilities include mechanical design & analysis using computer-aided design (CAD), conducting packaging trades, tolerance and interference analyses, generating drawing packages & associated electronic data, and supporting the fabrication, assembly and test of the hardware.


Basic Qualifications:

•5 Years with Bachelors in Science; 3 Years with Masters; 0 Years with PhD.
•A Bachelor of Science degree in a STEM (Science, Technology, Engineering or Math) discipline
•Electronic packaging, CAD, or mechanical design experience in an aerospace environment
•Demonstrated technical skills with experience supporting a multi-disciplined team
•Experience working with different partners across organizations and programs
•Proficient in performing tolerance and interference analyses
•Experience in generating and releasing product detail and assembly drawings
•Experience with PTC Creo / Intralink software applications



Preferred Qualifications:

•A Master’s Degree in Mechanical or Aerospace Engineering and 4+ years of engineering experience in an aerospace environment
•Experience with electronic packaging / mechanical design for airborne & space applications
•Electronics design development and sustaining experience spanning cradle to grave
•Experience with Enovia PLM software application
•Proficiency with electrical design, electronics manufacturing processes and qualification activities
•Familiarity with research and development of advanced packaging technologies
•Active DoD Secret or Top Secret, and/or SCI clearance
 
Job Number: MB-1631
Job Location: Redondo Beach, CA
Rate: 58-60/hr
Per Diem: no
Duration: 12 month contract
Input Date: 06/12/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Interior Designer

Description:
Engineering Contractor

Location: Savannah, GA
Pay Rate: $54.76/hr - $56/hr
Duration: Long Term W2 Contract
Shift: First

Unique Skills:
-Design Engineer/Mechanical Engineering for Aircraft Cabin Interiors in Final Phase Completions.
-Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft.
-Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations.
-Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis.
-Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
-Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam.
-Design Engineer will be required to liaison with the shop on engineering issues.

Design assignments include but are not limited to:
-Item Installation Analysis
-Similarity Analysis
-Configuration Analysis Design engineer will employ design standards consistent with company standards and accepted design methods executed under the direction of the Mechanical engineering Group Head to meet aircraft delivery schedule.

Education and Experience Requirements:
High school diploma or GED
 
Job Number: 8552
Job Location: Savannah, GA
Rate: 54.76 - 56
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 03/07/2018
Last Updated: 03/21/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Technician

Description:
Engineering Technician - Verily Life Sciences

Location: South San Francisco, CA

Terms: Long Term Contract Employment

Top 3 Daily Responsibilities:

Fabrication of thin plastic lenses.
Mold handling.
Inventory management.
Required Skills:

3 years of hands-on experience in microelectronic or medical device assembly.
Experience working with silicones, epoxies, polyurethanes or other medical plastics.
Attention to detail, proactive, organized and thorough with a desire for continuous improvement.
Must have a high level of hand-eye coordination and manual dexterity to work with small plastic and metal components under microscope.
Ability to utilize basic math skills.
Ability to read, write, and comprehend English.
Able to work in a laboratory environment (standing, sitting, stooping) for long periods.
Bachelor's degree in Material Science, Mechanical Engineering, Electrical Engineering or equivalent practical experience.
Nice to Have Skills:

Prior experience in medical device microassembly, optics, inspection and electronic evaluation.
Experience with microscopy.
Ability to track, document and assess process related quality issues.
Prior experience in a clean room environment.
Excellent written and verbal communication skills as well as ability to communicate effectively with scientist and engineers from a wide range of technical backgrounds.
Attention to detail, proactive, organized and thorough with a desire for continuous improvement.
Overview:

Verily’s Life Sciences custom-designed smart contact lenses aim to push the envelope of electronics, materials, and technology to improve people's lives worldwide.
The Integration Team ensures that these cutting-edge technologies come together to realize devices that are reliable, robust and ultimately meet the needs of wearers worldwide.
In the R&D lab, you will execute and help develop protocols using a variety of microfabrication and microassembly techniques to produce prototypes and meet the needs of the Testing and Validation teams.
You will work closely with Verily Engineers to improve designs, troubleshoot, and scale these processes to meet Verily's standards of quality and reliability.
Our Vision:

We are looking for a passionate and capable Engineering Technician to join our team and to help fabricate next-generation devices.
This is an opportunity to be involved in solving interesting and challenging problems on a very unique project!
As an Engineering Technician, you will assist a team of engineers in a large variety of tasks including device assembly, material preparation, test fixture prototyping, testing and data reporting.
Responsibilities:

Execute and manage parallel process flows involving multiple device builds. Follow SOPs to manufacture prototype devices, and perform tests, analyze data, and assist in drafting SOPs and Test Instructions.
Maintain and stock materials as necessary to support device builds and prototype production.
Detailed inspection and verification of process quality standards including documentation and metrology including use of microscopy and metrology equipment.
Hands on work within a laboratory setting handling sensitive optical and electronic parts and materials.
Has the ability to work in cleanroom microassembly environment by maintaining a clean and safe work environment and keeps equipment fully functioning.
Performing and documenting in-process quality checks on finished product.
Ability to work in cleanroom microassembly environment by maintaining a clean and safe work environment and keep equipment fully functioning.
Maintaining clean room integrity by using proper attire and adherence to clean room environment practices and procedures.
Preparing lot history records where necessary.
Working with engineers and technicians to resolve line issues and suggest improvements.
 
Job Number: 384157
Job Location: South San Francisco, CA
Rate: Open
Per Diem: No
Overtime: Possible
Duration: 13 Mos
Start Date: ASAP
Input Date: 03/26/2018
Firm Name: CDI CORPORATION
Attention: Kris Douglas
Address: 17177 PRESTON RD STE 300
City, State: DALLAS, TX 75248
Website: www.cdicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Facilities Maintenance Technicians - Nashville, TN

Description:
STS AeroStaff Services is hiring Facilities Maintenance Technicians in Nashville, Tennessee.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Qualifications:

• Must have experience with one or more of the following: Plumbing, Electrical, and/or HVAC

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 41621
Job Location: Nashville, TN
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 02/22/2018
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

Flight Readiness Technician D (4) - CA - C

Description:
Chipton-Ross is seeking 4 Flight Readiness Technician D's located in Palmdale, CA

RESPONSIBILITIES:
Inspector Aircraft, Mechanic Electrical and Electronics, and Mechanic Flight, Individual job duties may include: Perform operational checkout of aircraft prior to and during preflight. Inspect explosive and armament installations. Maintain aircraft historical records. Perform activities prior to flight status and final inspection and daily maintenance of completed experimental aircraft or major modification to experimental aircraft. Inspect and/or perform bench and flight line operational checkout and inspect, trouble-shooting, adjustment and repair of electrical and electronic systems. Inspect the calibration, adjustment, troubleshooting, repair and modification of electronic test equipment used exclusively by production and at times may be required to inspect the calibration, adjustment, trouble-shooting, repair and modification of other electronic test equipment as directed. Perform aircraft and/or spacecraft bench or flight line operational checkout, trouble-shooting, adjustment and repair of any electrical or electronic system. Fabricate, adjust, trouble shoot, repair and modify electronic test equipment. Perform operational checkout of hydraulic systems and mechanical systems. Diagnose and correct hydraulic and mechanical malfunctions. Operate engines during run-ups and troubleshoot when needed. Perform engine buildup as assigned. Install, repair, and replace tanks, power plants, generators, and aircraft engines. Install or replace reservoirs, etc. and repair leaks in same. Install or replace instruments such as fuel quantity, rate of climb and oil pressure indicators. Splice, route, clamp, solder, and string tie wires or wire bundles. Repair, install and hook up bomb, missile and rocket racks and pylons. Install and load ejection seats and guns. Install adjust, repair and replace structural parts and assemblies. Modify parts such as skins, doors, aircraft frames, test panels, clips, brackets, angles and ribs without the aid of jigs and ixtures. Modify aircraft components or aircraft support equipment. Perform composite repairs

ADDITIONAL EXPERIENCE:
Knowledgeable and skilled in F15 mechanical, structural, power plant, hydraulic, pneumatic, and electrical systems operation and flightline methods and common shop practices.
Knowledgeable and able to interpret and work from USAF technical orders (T.O.s), blueprints, sketches and written and verbal instructions.
Knowledgeable and able to use computer systems for office and shop applications.
Knowledgeable about and able to work in FOD controlled environments.
Knowledgeable and able to apply shop math.
Skilled in listening and interpersonal participation, and able to work with others as part of a team which includes giving and receiving feedback, and assisting others in completion of tasks.
Able to complete and maintain all required training and certifications needed to do your job efficiently.
Able to climb, stand, bend, kneel, reach, crawl, and walk on or around aircraft or work stands and in confined spaces.
* F-15 Crew Chief experienced personnel, sound understanding of Air Force Tech Order usage and application. Experienced Flight Line operations, preflight, launch, recovery, and functional checkout of Hydraulics/Avionics/Mission Systems/Weapons loading.
* F-15 Electrical/Avionics experience, sound understanding of Air Force Tech Order usage and application. Versed in Flight Line Operations, Avionics/Electrical preflight and functional checkout of disturbed systems.
* Weapons Load Standardization/Weapons loading: Plans, organizes, participate and directs aircraft armament systems maintenance activities. Establishes and evaluates performance and training standards, maintenance controls, and procedures. Checks methods and techniques used to load and unload munitions on aircraft, to repair and maintain aircraft release and gun systems, and to maintain, repair, and modify associated equipment.


EDUCATION/EXPERIENCE:
This job requires specialized vocational training or an Accredited Associate's degree and 3 to 5 years work
related F15 experience or an equivalent combination of education and experience

VARIABLE SHIFT
WORK HOURS: Candidates need to be available to work 2nd shift, if needed (2nd shift begins at 2:30 PM).

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

 
Job Number: 166698
Job Location: Palmdale, CA
Rate: $DOE
Duration: 12 Months
Input Date: 12/01/2017
Last Updated: 09/21/2018
Firm Name: CHIPTON ROSS
Attention: Brent Sizemore
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: bsizemore@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
IR/EO Staff Systems Engineer - Digital System Modeling

Description:
*Capturing results in white papers and presenting results to customers (strong technical presence)
*Working with interdisciplinary team consisting of systems, software, firmware, and electrical
*Working with test engineering team with EO/IR sensor characterization
*Ability to create and execute to digital system modeling roadmap including hardware-in-the-loop and integration with embedded processing
*Excellent planning, management and communication skills
*Ability to provide technical direction and generate material for proposals
*Ability to contribute to corporate roadmaps including EO/IR and embedded processing technology
*Analysis of Customer Documentation to create System Level Concepts of Operations (CONOPS), Specifications, and Architectural Design
*Work independently and create technical direction for the overall organization

Qualifications:
*Bachelor's Degree in Aeronautical, Electrical, Electronic, Mechanical, Software or Systems Engineering, or Computer Science
*10+ years functional experience required
*Must be able to obtain a security clearance
*Design and development of Matlab/Simulink modeling, including but not limited to:
-Detailed knowledge of Matlab/Simulink tools (advanced user with 10+ years’ experience)
-Detailed knowledge of IR/EO systems including generation/use of characterization data
-Detailed knowledge of integrating software/firmware source into Matlab/Simulink
-Detailed knowledge of integrating 3rd party tools into Matlab/Simulink
-Detailed knowledge of performance report generation using Matlab/Simulink
*Master's Degree preferred
*Knowledge of algorithms, image processing, software, and firmware is preferred
*Knowledge of model based design is preferred

Benefits: Visit http://www.teamglobal.com/benefits.html for more details.
 
Job Number: 127390
Job Location: Fort Worth, TX
Start Date: ASAP
Input Date: 02/23/2018
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: GCP Recruiter
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Inspector (Mechanical)

Description:
Notes from the Hiring Manager:

<> The Inspector should have experience inspecting cables and mechanical parts within a manufacturing environment , preferably with a mechanical background instead of electrical
<> They will receive multiple parts, which will be a mixture of cables and mechanical parts but vary from day-to-day; they should be able to see the part and know how to proceed with inspection, or at least be able to read the engineering drawings.
<> Experience with inspection tools such as Calipers, Measuring Devices / Equipment, Tape Measure, Feeler Gauge, etc
<> IPC 610 or 620 Certification is a plus


Summary:

To perform checks, tests, gauging, and instrument inspections of materials, goods in process, and finished goods.

Job Description:

> Performs audits, tests & inspections of materials, goods in process or finished goods within value stream (receiving through final system assembly) assuring quality first by determining compliance to drawings, procedures & specifications
> Applies established inspection procedures & uses simple inspection/testing tools and instruments of a “go/no go” nature.
> Develops and/or uses test and inspection set-ups utilizing mechanical and/or electrical test measurement equipment.
> Inspection methods and limits require good judgment and interpretation.
> Requires interpretation of inspection plans, tests and procedures.
> Recommends changes to procedures, processes, and drawings to improve efficiency and/or quality of the product.
> Identifies and documents nonconforming material in accordance with applicable procedures.
> Assists and trains others in assuring the proper test, measurement, and procedural operations.
> Ensure adherences to policies and procedures accordingly.
> Practices Total Quality principles and concepts.
> Acquire IPC-610/STD 001 and IPC-620 Certifications as applicable

Qualifications:

> 1-2 years related experience with a High School diploma preferred
> Knowledge of manufacturing and quality assurance processes and/or procedures.
> Knowledge of military and commercial quality specifications.
> Knowledge of Statistical Process Control.
> Knowledge of digital and analog circuitry.
> Knowledge of electrical and/or mechanical inspection.
> Knowledge of workmanship standards.
> Knowledge of packaging and preservation requirements.
> Understanding of Total Quality principles and concepts.
> Ability to communicate effectively verbally and in writing.
> Ability to use electrical and mechanical inspection equipment.
> Ability to develop and use simple to complex inspection set-ups.
> Basic algebraic skills.
> Ability to read, analyze and interpret detailed specifications, drawings, procedures, and schematics.
> Ability to work effectively within a team environment


Mark A Ludwig
Vice President
Global American Staffing
Email: mludwig@globalams.us
Direct: (508) 434 – 6180
Office: (508) 230 – 5030 x123
 
Job Number: 011_2018
Job Location: Hunt Valley, MD
Rate: DOE
Per Diem: Split Possible
Overtime: Yes / Possible
Duration: 12+ Months
Start Date: ASAP
Input Date: 02/28/2018
Last Updated: 04/02/2018
Firm Name: GLOBAL AMERICAN STAFFING
Attention: Mark A Ludwig
Address: 12 HARDING ST STE 204-205
City, State: LAKEVILLE, MA 02347
Phone: 508/230-5030
800 Phone: 800/510-8050
Fax Phone: 508/923-0005
Website: www.globalamericanstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Instrument Project Engineer - Refinery Exp (TX)

Description:
THIS IS NOT FOR AN INTERN, THIS POSITION REQUIRES AT LEAST 10-15 YEARS OF EXPERIENCE.

Basic Function
An Instrument Project Engineer (IE) is responsible for the design and implementation of process instrumentation from initial conception through field installation. They are responsible for designs that provide the most reliable and cost-effective instrument systems. In addition, the IE provides consulting services to process designers in developing process design specifications, develops operating and training manuals for mechanical and process personnel and participates in training operating personnel.

An IE:
• Writes purchase and construction specifications and writes and performs Factory Acceptance Tests.
• Uses vendor software programs for sizing safety and control valves.
• Specifies, procures, and configures Programmable Logic Controllers (PLC) and field hardware such as transmitters, controllers, pneumatic and electronic transmission system.
• Utilizes standards and best practices from American Petroleum Institute (API) and International Society of Automation (ISA), National Fire Protection Association (NFPA) to perform the above functions.

Responsibilities.
The Instrument and Controls Engineer may be responsible for:
• Function as project engineer on instrumentation and capital projects and large maintenance projects.
• Taking lead role on Instrumentation and controls capital projects including PLCs.
• Help identify areas where instrumentation/controls can improve plant operations and profitability.
• Developing capital and expense budget requirements related to instrumentation system upgrades, PM/PdM programs, repairs, expansions, etc.
• Serving as a technical resource to properly identify new and existing equipment specifications and proper operating parameters/ranges for instrumentation equipment.
• Overseeing application and interpretation of National Electric Code and other applicable city, state, federal codes and standards (e.g. NPRA, NFPA, API, ISA).
• Interact with Engineering and Construction contractors, both on-site and off-site.
• Leverage the application of instrumentation safety standards, mechanical integrity, design and maintenance.
• Using documentation systems and processes that maintain accurate instrumentation information and drawings.
• Support criticality assessments of the plant's instrumentation equipment.
• Design and evaluate Refinery Safety Instrumented Systems (SIS). Perform Safety Integrity Level (SIL) analysis and engineering upgrades of safety instrumented systems.

Basic Required Qualifications.
• Must be legally authorized to work in the United States, at least 18 years of age and possess a valid driver’s license.
• Must possess a bachelor’s degree in Electrical Engineering, Chemical Engineering, Mechanical Engineering, or Industrial Engineering.
• Must have three or more years of instrumentation experience and three or more years of direct experience in a refinery, chemical and/or manufacturing industry.
• Demonstrated knowledge and use of SPI (InTools) database and specifications.
• Proficient in the specification, troubleshooting, maintenance and overhaul of process control values.
• Demonstrated knowledge of PLC's.
• Proficient in MS office (Word, Excel, Outlook, Projects).
• Must be willing and able to perform, comply with the following:
• Wear Nomex fire retardant clothing and personal protective equipment (such as steel-toe shoes, ear, and eye protection).
• Maintain face daily so that a respirator/face mask can seal properly (some examples include being free of facial hair and/or clean shaven), climb up to 200 feet in height and work in enclosed spaces such as tanks and silos

Preferred Qualifications:
• Industry certifications (ISA)

FOSTER DESIGN'S BENEFITS:
• Working for a 54-year old company
• Minimum 10 Paid Holidays with no waiting period
• Immediate 401K participation, 1 year 100% vesting schedule, matching employer contribution
• Free Financial Consultant
• Medical/Dental/Vision/Prescription card – BCBS
• MetLife – Long Term Disability Insurance
• Vacation Pay
• Per Diem Assignment Allowance, when applicable
• Per Diem Split, when applicable
• Paid Weekly (Direct Deposit)
 
Job Number: FD-021618TX
Job Location: Borger, TX
Rate: $BOE/HR
Per Diem: Possible
Overtime: Possible
Duration: 11 Months or linger
Start Date: 03/26/2018
Input Date: 03/08/2018
Last Updated: 03/21/2018
Firm Name: FOSTER DESIGN INC
Attention: Recruiter
Address: 200 W DOUGLAS AVE STE 110
City, State: WICHITA, KS 67202
Phone: 316/832-9700
800 Phone: 800/345-3394
Fax Phone: 316/832-9357
Website: www.fosterdes.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Launch Control Software Development Engineer

Description:
Launch Control Software Development Engineer

Location: Centennial, CO
Pay Rate: DOE
Duration: 6-12 month W2
Schedule: 9/80, exempt OT
**MUST be a U.S. CITIZEN; NO DUAL CITIZENSHIP**


This position is for the Integrated Fluids Systems (IFS) group. IFS performs test and validation of Launch Control Software that defines critical operations during countdown and vehicle test.


Job Function

• Develop systems integration solutions related to automated launch site ground operations
• Perform simulated countdown testing in Systems Integration Lab (SIL)
• Establishes functional and technical requirements for fluids related software, and ensures proper integration with other software and hardware systems and program operational requirements
• Interface with Launch Operations, Propulsion Design, Electrical Ground Support Equipment, Flight Software and Avionics
• Synthesizes all applicable vehicle, ground, and operational requirements into software or operational solutions that acknowledge technical, schedule, and cost constraints
• Develops, documents, tests, and maintains requirements for ground software
• Develops and documents mathematical rationale for software parameters
• Responsible for subsystem and integrated system level software verification by defining comprehensive software test plans and performing software testing in the SIL
• Reviews and performs analysis of applicable SIL and launch site data to ensure proper software functionality


Preferred Qualifications

• A good understanding of fluids and thermodynamic principles, mechanical system design considerations, instrumentation usage, and other technical principles and concepts within the engineering field
• A significant breadth and depth of knowledge in the following systems: airborne pneumatic and propulsion systems, GSE commodities, airborne avionics, GC3 hardware, CCLS ground software
• Working knowledge of Test Requirement Documents (TRDs), hardware and operational limits, the Parameter Signal Measurement (PSM) database, Automated Data Monitoring System (ADMS), Microsoft Word and Microsoft Excel
• Familiar with good software testing practices to validate all nominal and off nominal logic paths, with an understanding of how software applications are structured, and a focus on the system level functionality
• Able to assimilate, master, and recall large amounts of detailed information as it applies to multiple system interfaces and interdependencies it in a variety of areas
• Detail oriented, focused on following through on all related tasks, with methodical and systematic problem solving and troubleshooting skills
• Launch site operations experience is a plus
 
Job Number: 8704
Job Location: Centennial, CO
Rate: DOE
Per Diem: Possible
Overtime: Exempt
Duration: 6-12 mos
Start Date: ASAP
Input Date: 03/01/2018
Last Updated: 03/26/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Liaison MRB / Product Review Engineer III (OH)

Description:
Active Secret Clearance, NOT REQUIRED to start.

Applies knowledge of Boeing design principles to assess and resolve product/process issues in the repair and manufacturing testing of electronic circuits and electrical assemblies for the Electronics program. Analyzes, conducts root cause analysis and develops dispositions for design non-conformances. Applies engineering principles to research technical, operational and quality issues that cannot be resolved by customer and designs interim and final engineering solutions. Identifies documents, analyzes reported problems and communicates deviations that could impact design intent and safety; recommends and manages resolution. Develops and implements product/process improvements. Ensures supplier and build partner compliance with Boeing standards. Develops customer correspondence for continued safe operation and maintenance of equipment.

Expected Duties
Reviewing and evaluating functional and performance test data for electrical and electronics circuits and electrical assemblies against their acceptance criteria. Troubleshoot electronics and electrical assemblies and identify defects to next subassembly. Disposition defects for appropriate repairs and rework.
Collect and evaluate data on customer findings for product/process improvement opportunities that may include recurrent product support issues.
Participates in Material Review Boards and Integrated Product Teams (IPTs). Provide Engineering support for material review activities on electronic and electronic components by performing Engineering investigation of requirements traces, generating supplier statement of work documents for vendor repair, resolving technical issues at vendors, coordinating technical activities with multifunctional teams.
Lead the technical evaluation of vendors proposed plans by reviewing vendor acceptance test procedures for compliance to requirements and review of vendor rework findings to determine if failure has been verified.

Must be capable of utilizing: schematics, software descriptions, historical data, electronic and electrical device functional descriptions, technical manuals, automated test equipment, standard lab equipment.

Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.

ACS Group (formerly 'Comforce')
 
Job Number: MRBoh
Job Location: Heath, OH
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 01/24/2018
Last Updated: 03/23/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

MP&P Engineer 3 - CA

Description:
Chipton-Ross is seeking a MP&P Engineer 3 located in Huntington Beach, CA

RESPONSIBILITIES:
Parts Manager/Components Engineer - Manage the electrical, electronic, and electro-mechanical (EEE) parts and components including subcontractor oversight of EEE parts and components for the PAC-3 Program. Position requires a strong track record in communication with program management, customers, and subcontractors outside of Client. The position also requires controlling PMP product specifications, subcontractors parts management control plans, and DMSMS part management plans, lead teams in assessing applications, qualifications, evaluate/approve replacement EEE parts and components including qualification of plastic encapsulated microcircuits (PEMs), technology insertion, life cycle cost and parts obsolescence assessments/solutions, developing non-standard parts approval requests (NSPARS) for new part additions and assessing derating exceptions. The parts manager will have authority regarding all technical PMP dispositions. The parts manager is expected to integrate technical, value, safety, and HAZ-MAT considerations of EEE parts and components into product definition to comply with Client, customer, and government requirements. The parts manager will be the prime interface with the customer on parts, materials and process concerns and lead initiatives to improve/develop PMP control processes in the absence of existing procedures for the PAC-3 Program as well as for the Client enterprise PM&P Engineering Function. The parts manager will support with the PAC-3 PMPCB Chairman and work with parts managers/component engineers as well as other members of the PAC-3 Program team to define/implement engineering solutions to meet organization objectives. The parts manager will also work with the PAC-3 reliability, quality, configuration management, and logistics team to implement the PAC-3 Program PMP practices across the program in a cost efficient manner while maintaining contractual standards.

EDUCATION:
Accredited Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.

WORK HOURS:
Full-Time/First Shift
8 AM - 4 PM

MISCELANEOUS:
Travel Required-Travel to EEE Part manufacturer's local and domestic travel on occasion.

 
Job Number: 168068
Job Location: Huntington Beach, CA
Rate: $DOE
Duration: 6 MONTHS
Input Date: 01/22/2018
Last Updated: 09/21/2018
Firm Name: CHIPTON ROSS
Attention: Kristie Hardage
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: knguyen@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer (PWA and LRU Assembly) CA

Description:
13701

Title TEMP Staff Manufacturing Engineer (PWA and LRU Assembly)
Job Summary General Atomics Aeronautical Systems, Inc. (GA-ASI), an affiliate of General Atomics, is a world leader in proven, reliable remotely piloted aircraft and tactical reconnaissance radars, as well as advanced high-resolution surveillance systems.

We recognize and appreciate the value and contributions of individuals with diverse backgrounds and experiences and welcome all qualified individuals to apply.

Support the design (DFM), first article, production, test, and system integration of Printed Wiring Assemblies and Line Replaceable Units for all UAV platforms including Ground Control Stations (GCS). Assemblies will include surface mount as well as through hole technology and mechanical assembly.

Duties and Responsibilities •Responsible for manufacturing process development, implementation, and continuous improvement to enhance Quality / Yield, reduce Cost, and improve Productivity / Schedule. Initiate and lead lean manufacturing process improvement projects.
•Specify and implement automation equipment and processes.
•Identify and assist in addressing safety issues on the manufacturing floor.
•Support manufacturing production planning and coordination, execution and operations process development.
•Provide production support to assemblers and leads.
•Document manufacturing processes and assembly work instructions in conjunction with T&O Planning.
•Design shop aids and tooling to assist production.
•Disposition non-conforming parts, identify root cause, and implement corrective and/or preventive action to reduce scrap and rework.
•Collaborate with Design Engineering during prototype, development and first article manufacturing.
•Expertise in assembly methods and processes, including surface mount technology, through hole technology, mechanical assembly, and testing. Experience in both analog and digital technologies as well as a background with RF.
•Experience with development and deployment of manufacturing automation and remaining current with technology.
•Experience with Electrical Schematics and Circuit Diagrams; Drawings and BOMs; Assembly Instructions; Engineering Change systems; Quality systems for non-conforming parts and corrective action. Experience with Lean Manufacturing methodologies for waste reduction, e.g.: 5S, Standard Work, TAKT, Pull System, 5S, Value Stream Mapping, cell design, and manufacturing flow.
•Clearly and effectively communicate both verbally and in written form to both technical and non-technical audiences, especially regarding manufacturing processes, engineering issues and proposed changes, and quality issues and dispositions.

Qualifications Essential Qualifications Typically requires a bachelors degree, masters degree or PhD in engineering or a related technical discipline from an accredited institution and progressive engineering experience as follows; nine or more years of experience with a bachelors degree, seven or more years of experience with a masters degree, or four or more years with a PhD. May substitute equivalent engineering experience in lieu of education. Demonstrates an extensive technical expertise and application of engineering principles, concepts, theory, and practice with the ability to organize, plan, schedule, conduct, and coordinate workloads to meet established deadlines or milestones with some experience in project leadership. Must possess the ability to understand new concepts quickly and apply them accurately throughout an evolving environment. Strong communication, presentation, and interpersonal skills are required enabling an effective interface with other departments and/or professionals, and capable of representing the organization as a prime technical contact, as well as providing leadership and guidance to less experienced professionals. Customer focused, formulates plans based on the development of innovative new designs in resolving advanced technical engineering problems. Must be able to work both independently and in a team environment. Able to work extended hours as required. A Professional Engineering License, original work(s) published in professional engineering journals, and invited to present one or more original works to an engineering symposium are desirable.
Additional Qualifications Typically requires a bachelors degree, masters degree or PhD in engineering or a related technical discipline from an accredited institution and progressive engineering experience as follows; four or more years of experience with a bachelors degree or two or more years of experience with a masters degree.
•Experience with IPC & MIL standards, including: IPC/WHMA-A-610 and 620 , J-STD-001 – Requirements for Soldered Electrical and Electronic Assemblies, MIL-STD-1553 – Digital Time Division Command/Response Multiplex Data Bus, MIL-STD-1760 – Aircraft Electrical Interconnection System, SAE-AS39029 (MIL-C-39029)– Experience implementing capital equipment in factory environment.
•Experience with MRP systems, eg SAP or MTO/WDS. Experience with Microsoft Office Project and Visio.
•Experience with programming.
•Experience with databases, e.g. Oracle and FileMaker. Knowledge of SQL.
•Experience with process mapping and demand flow technology
•Strong background in electro-mechanical assemblies.
•Six Sigma Green Belt
City San Diego
State California
Travel Percentage Required 0% - 25%
Clearance Required? No
Work Schedule Rule 9/80
Temp Assignment Duration (# of Days) 180
 
Job Number: JE-13701
Job Location: San Diego, CA
Duration: 6 month contract
Input Date: 03/05/2018
Last Updated: 03/12/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer - Aerospace and Defense

Description:
Ingenium Technologies - San Diego, CA



A Manufacturing Engineer is needed for a proven and reliable world leader in Aviation Air-to-Ground Communications, Aircraft Systems and Tactical Reconnaissance Radars, as well as advanced high-resolution Surveillance Systems. This individual will support the design, production, test, and system integration of Printed Wiring Assemblies and Line Replaceable Units for all aircraft platforms.





Additional Job Postings: http://www.ingeniumtech.com/tech_staffing/



Responsibilities will include but not be limited to:



Support the design, production, test, and system integration of Printed Wiring Assemblies and Line Replaceable Units for all aircraft platforms.
Responsible for manufacturing process development, implementation, and continuous improvement to enhance Quality / Yield, reduce Cost, and improve Productivity / Schedule. Initiate and lead lean manufacturing process improvement projects.

Specify and implement automation equipment and processes.

Identify and assist in addressing safety issues on the manufacturing floor.

Support manufacturing production planning and coordination, execution and operations process development.

Provide production support to assemblers and leads.

Document manufacturing processes and assembly work instructions.

Design shop aids and tooling to assist production.

Disposition non-conforming parts, identify root cause, and implement corrective and/or preventive action to reduce scrap and rework.

Collaborate with Design Engineering during prototype, development and first article manufacturing.

Expertise in assembly methods and processes, including surface mount technology, through hole technology, mechanical assembly, and testing.

Experience in both analog and digital technologies as well as a background with RF.



Software Requirements:

MRP systems, eg SAP or MTO/WDS. Experience with Microsoft Office Project and Visio.
Databases, e.g. Oracle and FileMaker. Knowledge of SQL.


Required Experience:

5 to 15 Years experience in aerospace manufacturing, processing and materials knowledge.
Background in Printed Wiring Assemblies and Line Replaceable Units.
Expertise in assembly methods and processes, including surface mount technology, through hole technology, mechanical assembly, and testing.
Experience in both analog and digital technologies as well as a background with RF.
Experience with development and deployment of manufacturing automation and remaining current with technology.
Experience with Electrical Schematics and Circuit Diagrams; Drawings and BOMs; Assembly Instructions; Engineering Change systems; Quality systems for non-conforming parts and corrective action.
Experience with Lean Manufacturing methodologies for waste reduction, e.g.: 5S, Standard Work, TAKT, Pull System, 5S, Value Stream Mapping, cell design, and manufacturing flow.
Experience with IPC & MIL standards, including: IPC/WHMA-A-610 and 620 , J-STD-001 – Requirements for Soldered Electrical and Electronic Assemblies, MIL-STD-1553 – Digital Time Division Command/Response Multiplex Data Bus, MIL-STD-1760 – Aircraft Electrical Interconnection System, SAE-AS39029 (MIL-C-39029)– Experience implementing capital equipment in factory environment.
Experience with process mapping and demand flow technology
Strong background in electro-mechanical assemblies.
Six Sigma Green Belt preferred.
Required Education: Bachelor's degree preferred not required.



Position: Direct Hire



Location: San Diego, CA



Employment Criteria : This position includes access or potential access to ITAR technical data. Therefore, candidates will need to qualify as a US Citizen, who does not work for a foreign company/foreign government/foreign governmental agency or organization, and is in compliance with International Traffic in Arms Regulations.



Employment Statement: Ingenium Technologies is an equal opportunity employer and does not discriminate on the basis of race, color, religion, sex, age, national origin, disability, veteran status, sexual orientation or any other classification protected by federal, state or local law. Proof of eligibility for employment will be required upon employment.

Due to the requirements of the Customer, No Visa sponsorship is available.
 
Job Number: 120164
Job Location: San Diego, CA
Rate: 80-95k/yr
Per Diem: no
Overtime: no
Duration: Direct Hire
Start Date: asap
Input Date: 03/07/2018
Firm Name: INGENIUM TECHNOLOGIES
Attention: Alvin
Address: 4216 MARAY DR UNIT A1
City, State: ROCKFORD, IL 61107
Phone: 815/399-8803 X255
Fax Phone: 815/399-8804
Website: www.ingeniumtech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer - Level 2

Description:
Location: Oldsmar, FL
Rate: $30.00 - $35.00/HR
Duration: 1+ year contract
Shift: 2nd Shift – 3:30 PM to 1: 00 AM
Overtime: Possible on weekdays and weekends

*****MUST be a U.S. Citizen*****

Description
Provide manufacturing engineering support to the build of electromechanical cable assemblies. Provide day-to-day support to manufacturing operations to ensure quality, cost and schedule goals are met; Investigate, communicate, and solve design, producibility, and work instruction related assembly issues as required. Define optimal material and product flow within the production work cell, taking into consideration the unique requirements of each customer. Generate and maintain detailed assembly work instructions including narrative, diagrams, photographs, attachments, and linked documents. Support design change management activities. Perform and communicate nonrecurring engineering activities during production startup, which includes, writing work instructions, tooling and fixture design, development of machine automation programs as required, and configuration of the manufacturing bill of materials for manufacturability. Interface with technical counterparts in other organizations both within and outside Clearwater Operations. Must be willing to work 2nd shift

Skill/Experience/Education
Mandatory:
- Minimum 3 years manufacturing engineering experience in a technical role supporting the design and manufacturing of cable assemblies.
- Must have IPC-620 knowledge.
- Strong interpersonal skills and demonstrated ability to work with coworkers and others from diverse backgrounds.
- Proven ability to effectively communicate through written and oral means, and to multitask by handling multiple assignments in parallel.
- Mechanical and electrical aptitude, and the ability to quickly learn new software applications.
- Experienced user of Microsoft office software applications including MS Word, Project, Excel, Visio, and Power Point.
- Ability to read and interpret Engineering Drawings.
- Willingness to work overtime and during off days occasionally as required to support production operations.
- Must be willing to work 330pm to 1am.

Desired:
- Bachelors degree from an accredited University in Engineering.
- Experience or training with advanced manufacturing technology and automated equipment applications, particularly as it relates to cable assembly manufacturing; understanding of lean manufacturing principles and the use of statistical tools to solve problems.
- Strong technical understanding of cable assembly producibility and process flow.
- Specific experience with SAP and Solumina manufacturing execution system. Fiber optic cable manufacturing is a plus.
 
Job Number: 8697
Job Location: Oldsmar, FL
Rate: $30.00 - $35.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1+ yr
Start Date: ASAP
Input Date: 03/05/2018
Last Updated: 03/12/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer Planners - Greensboro, NC

Description:
STS AeroStaff Services offers Manufacturing Engineer Planner jobs in Greensboro, North Carolina.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Summary:

The Manufacturing Engineer - FTP is responsible for all manufacturing engineering aspects of defining, creating, and maintaining written FTP documents to include defining tooling, equipment, test equipment, and procedures for producing and testing aircraft at the client facility.

Duties and Responsibilities:

• Review and approve all Engineering drawings and models for assigned A/C areas, ensuring parts, assemblies, and/ or installations are manufacturable
• Define, review, and approve all FT requirements creating, maintaining, and writing FTP documents
• Define, review, and approve all FT tooling, equipment, and test equipment
• Manage all Design for Manufacturability Requests for assigned A/C area(s) reviewing/ creating and approving all internal and external submissions
• Review and approve all CR’s (Change Requests) to determine positive/ negative impacts to Production by coordinating with the various departments within client
• Review major Engineering and/or router changes with shop floor at the start of the respective Position and/ or at each Block Point change
• Create/ revise Master Routers for new/ revised Engineering for assigned A/C areas

Education, Work Experience, Certification, and/or Licensure:

• B.S.M.E., B.S.A.E., B.S.I.E., or B.S. Mfg. Eng./ Eng. Tech. preferred, but not required
• 10+ years’ of experience performing, defining, and testing aircraft with complex functional systems including mechanical and fly-by-wire systems
• A combination of experience and education is acceptable

Knowledge, Skills, and Abilities:

• Must have knowledge of, but not limited to:
o Mechanical/ electrical rigging and troubleshooting of flight controls, landing gear, and hydraulics
o Loading and verification of airborne software
o Installing and troubleshooting avionics systems including TCAS, Radar, AFCS, FADEC, etc.
o Ability to review 3D drawings and models for Engineering designs and specifications to ensure manufacturability and process capabilities
• Working knowledge of computer systems, programs, etc. including, but not limited to, the following:
o CATIA V5/ V6 experience is a plus.
o Experience programming robotics a plus.
o Router/ Work Instruction Creation and Maintenance in an advanced ERP/MRP system.
o SAP experience is a plus.
o Teamcenter Manufacturing/ Process Planning creating MBOM’s and BOP’s is a plus.
• Proven ability to trouble-shoot defects, manufacturing errors, and time consumption/ learning curve issues to improve shop floor performance.
• Ability to analyze a variety of engineering data to help determine how to meet company objectives
• Program/Project management experience as a Mfg. Engineer:
o Experience with Program/ Project management in a fast paced work environment having reported progress to peers, direct supervision, and upper management with experience in plant floor scheduling, creating project files, Gantt charts, process flow charts, track job progress, assign resources, etc.
o Proven capability to direct the work of other Mfg. Engineers to support the defined build sequence a must.
• Quality Engineering experience as a Mfg. Engineer:
o Proven ability to define inspection methods and criteria as well as interpret results to drive processes per Six Sigma (or equivalent) standards.
o Six Sigma certification a plus.
o Strong knowledge of AS9102 processes, procedures, and methods a must with experience writing or creating a plus.
• Purchasing experience as a Mfg. Engineer:
o Ability to perform vendor cost analysis versus internal costs to determine best location for manufacturing.
o Experience in supplier selection and management including directing/ addressing supplier concerns from a technical standpoint.
o Ability to read and understand LTA’s, P.O.’s, T’s & C’s, etc. a plus.
• Motivated self-starter able to work under minimal supervision.
• Experience in an IPT (Integrated Product Team) format is a must with experience as a formal or informal leader a plus.
• Promote and contribute to overall team environment, harmony, etc. is a must.

Physical Requirements:

• Incumbents may be routinely exposed to equipment operational noise heat-cold-dust, and/or aircraft equipment, parts, or fuel odors
• Incumbents may be required to stand, sit, squat, walk, bend, move, reach, or stretch for prolonged time periods with no restrictions, as required by job duties
• Work in a safe and professional manner while adhering to all regulatory requirements (FAA, OSHA, DOT, EPA, State, and Federal regulations, etc.)
• Read, hear, speak, and see with no restrictions, as required by job duties
• Comprehend and adhere to management directions and/or safety instructions with no restrictions
• Effectively communicate in Business English language
• Pull, push, carry, lift, or move items up to 10 lbs. throughout the work shift without assistance, as required by job duties
• Pull, push, carry, lift or move materials/people/items/equipment weighing up to 50lbs or more during the work shift, with the use of Company provided “reach assistance technology” or “movement assist technology” (fork-lifts, pallet jacks, pulleys, dolly’s, robotics reach equipment, people movers etc.), as required by job duties


Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 39239
Job Location: Greensboro, NC
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 02/26/2018
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineering Manager

Description:
Location: Wayne, NE/ Kewanee, IL/ Huntsville, TN/ Terra Haute, IN
Duration: Fulltime

Manager is looking for a higher profile candidate who has experience leading a group in to a new Lean direction. He needs a person with strong experience managing people.

Key Requirements:
- BS or BA in Industrial Engineering, Manufacturing Engineering or Mechanical Engineer or related degree required
- MBA degree a plus
- 5-10 years minimum prior experience supervising a technical/engineering work force.
- Proven skill in implementing Lean Manufacturing, developing manufacturing strategy as well as the ability manage multiple projects, set and maintain priorities, track and achieve results in a fast-paced environment required.
- Ability to Line Balance, Establish Quality requirement, implements standardized work and design Lean workstations required.

Additional Requirements:
- Experience in Control Plans, PFMEAs, fixture design desirable.
- Possesses the ability to lead and direct a skilled work force to manage budgets and achieve manufacturing metrics.
- Must have ability to manage and improve overall equipment effectiveness.
- Knowledgeable in skilled trade requirements and able to instruct/teach employees on the job.
- Electrical, mechanical, fluid power, welding, fabrication skills, HVAC knowledge a plus
- Capable of conveying technical information/issues to management.
- Knowledge in Computerized Maintenance Management Systems
- Use multiple computer programs (i.e., Word, Excel, Projects, Power Point, and Publisher)
- Ability read/interpret technical information/drawings and convey information to other employees and vendors.
- Operations Management, general management and cross functional experience in product design engineering and/or quality desired.

Job Summary
The Manufacturing/Facility Engineering (ME) Manager function is to manage all aspects of current manufacturing engineering activities including, defining the state of operations, defining standardized work, design processes, define machine loading, managing process control plans, management of machine tool functions including tool and fixture design and NC programing etc. The ME manager will also support continuous improvement through LEAN and will be responsible for managing the improvement process in his/her own organization as well as supporting the plant wide improvement process and establishing new baselines after improvement is made and validated. Within the ME plant organization, the ME Manager will create a framework for defining and running projects and will devise metrics aligned with operational and business unit’s goals to monitor trends and make appropriate managerial adjustments.

Managing a team that includes a maintenance supervisor(s) and manufacturing engineers to support these mfg. engineering and LEAN/continuous improvement activities the team will initiate and support projects to enhance worker safety, improve quality, improve production throughput and reduce or control costs. These projects will involve interface with internal skilled tradesmen, outside contractor, and corporate manufacturing engineering resources which will be developing future and strategic projects.

In daily operations the department will be responsible to develop and maintain standardized work instructions, perform line balance and other classical manufacturing/industrial engineering functions. Manage repair and maintenance stores to meet operations requirements. Track and report equipment reliability, repair, and maintenance cost. Develop, propose and implement energy savings projects. Maintain a safe and environmentally sound work place.
 
Job Number: 18-03429
Job Location: Wayne, Kewanee, Huntsville, Terra Haute, NE, IL, TN, IN
Rate: Open
Per Diem: Fulltime
Overtime: fulltime
Duration: Fulltime
Start Date: April 2018
Input Date: 03/02/2018
Firm Name: ICONMA LLC
Attention: Pratap Singh
Address: 1201 PACIFIC AVE STE 600
City, State: TACOMA, WA 98402
Phone: 253/213-2012
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Planner 3

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Manufacturing Planner 3
(U.S. Citizenship Required*)
Everett, WA
2018-5563

Responsibilities:
• Develop, implement and maintain various manufacturing plans, Bill of Materials, work instructions and illustrations to define and document as-built configuration.
• Assist with development and integration of suppliers, processes, materials, data and technology to meet manufacturing and delivery requirements.
• Assist in reviewing supplier data to ensure manufacturing related requirements are met.
• Identify tooling requirements and initiate tooling orders based on manufacturing and engineering requirements.
• Assist in tooling dispositions.
• Investigate and resolve manufacturing related issues of limited scope.
• Assist with producibility assessments for part or product designs.
• Assist in providing input to design, manufacturing processes and manufacturing technologies to meet cost and schedules.
• Develop work statements and sequencing of events to support delivery commitments.
• Assist in the review, maintenance and monitoring of internal documents.
• Provide ship side support, research and shop assistance

Qualification:
• Successfully pass training classes with a passing score of 85% or greater in order to gain access to the necessary software tools for the assignment (failure will result in termination from the assignment). Two of the classes are fundamental training in reading drawings; it is expected that candidates will have this knowledge.
• Basic understanding of wiring and wire routing
• Experience with wire bundle fabrication concepts, wire installation, electrical equipment installation and installation of wiring provisions.
• Experience in Teamcenter
• Experience using Manufacturing Execution Systems (CMES)
• WIRS: Wires Information Release System
• CAPP II
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• AA degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2018-5563
Job Location: Everett, WA
Duration: 39 Weeks, 1 Day
Input Date: 03/06/2018
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Sallye Smith
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Planner III & IV - Electrical/Electronics - (WA)

Description:
SEVERAL OPENINGS IN THE EVERETT & RENTON, WA AREAS.

Manufacturing Planners with Electrical/Electronics experience.

- Develop, implement and maintain various manufacturing plans, Bill of Materials, work instructions and illustrations to define and document as-built configuration.
- Assist with development and integration of suppliers, processes, materials, data and technology to meet manufacturing and delivery requirements.
- Assist in reviewing supplier data to ensure manufacturing related requirements are met.
- Identifies tooling requirements and initiates tooling orders based on manufacturing and engineering requirements.
- Assist in tooling dispositions.
- Investigate and resolve manufacturing related issues of limited scope.
- Assist with producibility assessments for part or product designs.
- Assist in providing input to design, manufacturing processes and manufacturing technologies to meet cost and schedules.
- Develop work statements and sequencing of events to support delivery commitments.
- Assist in the review, maintenance and monitoring of internal documents.
- Provide ship side support, research and shop assistance

Preferred Qualifications:

- Basic understanding of wiring and wire routing
- - Experience with wire bundle fabrication concepts, wire installation, electrical equipment installation and installation of wiring provisions.
Experience in Teamcenter
- Experience using Manufacturing Execution Systems (CMES)
- WIRS: Wires Information Release System
- CAPP II

AA degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience.

ACS Group (formerly 'Comforce')
 
Job Number: MPEEwa
Job Location: Renton & Everett, WA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 9+ Months
Start Date: ASAP
Input Date: 05/16/2018
Last Updated: 06/15/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Planning Openings - Renton, Everett, and Auburn

Description:
Open requirements for Electrical, Structures, and Composites. Must be able to complete and and pass client's training classes.Develops, implements and maintains various manufacturing plans, Bill of Materials, work instructions and illustrations to define and document as-built configuration. Develops manufacturing concepts and strategies to support business objectives. Develops and integrates suppliers, processes, materials, data and technology to meet manufacturing and delivery requirements. Reviews and approves supplier data to ensure manufacturing related requirements are met. Develops tooling requirements based on manufacturing and engineering requirements. Manages tools from initial design to end of use disposition. Investigates and resolves manufacturing related issues. Performs producibility assessments for part or product designs. Provides producibility input to design, manufacturing processes and manufacturing technologies to meet cost and schedules. Develops integrated work statements and sequencing of events to support delivery commitments. Drafts, updates and reviews processes and procedures to support business and regulatory agency requirements. Works under general direction.
Please call 206-763-2840/800-678-8644.
 
Job Number: 1810082319
Job Location: Puget Sound, WA
Rate: TBD
Per Diem: possible
Overtime: possible
Duration: 11 mos
Start Date: ASAP
Input Date: 03/06/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Recruiter
Address: TIME SQUARE 660 BUILDING
660 SW 39TH ST STE 215

City, State: RENTON, WA 98057
Phone: 206/763-2840
800 Phone: 800/678-8644
Fax Phone: 206/763-3283
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Project Engineer (Direct Position - Full Time)

Description:
Manufacturing Project Engineer
 Location: Chicago, IL
Duration: Direct Position (Full Time)
 
Requirements:
- Bachelor's degree in Mechanical, Electrical, or other related Engineering field.
- Knowledge of Lean Manufacturing principles, and demonstrated implementation of the lean principles & key performance indicators.
- Understanding of Tool Design and Tool Building, and its application with metal-cutting and forming equipment.
- Understanding of CNC programming and its application with metal-cutting and forming equipment.
- Technical knowledge of processes, equipment, and/or support services and other relevant manufacturing activities.
 
Job Summary:
The Project Engineer will lead, coordinate, and assist with projects of various magnitudes within Manufacturing Technology. Projects may vary from basic routing and BOM updates, to justifying and leading capital-funded projects such as new machine/equipment investments. This position is for a self-motivated, goal-driven engineer who displays an aptitude in many aspects of manufacturing and an ability to successfully manage projects to completion. The job requires an ability to develop project plans and communicate effectively throughout implementation. This person will report to Leadership within Manufacturing Technology.
 
The responsibilities of this position include, but are not limited to, the following:
- Assist with or coordinate various aspects of new or revised product/process/equipment, system implementation.
- May perform a leadership role in a project team as a fully functioning engineer, giving technical guidance to engineers of less experience and technicians assigned to work on a common project but does not have supervisory responsibility.
- Communicate effectively with all levels of the organization, most notably, intenal customers and suppliers.
- Demonstrate commitment to meeting and supporting departmental, divisional, and company goals/objectives/strategies.
- Demonstrate good report preparation, presentation, and listening skills.
- Create project plans and successfully manage/oversee projects through completion in a timely fashion.
- Use Microsoft Excel for improving operations/systems, problem solving, and presentations/project management.
- Demonstrate a high regard for people by treating them with dignity, respect, fairness and consistency.
- Set a good example of behavior, attitude and teamwork both within and between departments.
- Adapt to changes; shows commitment to change and continuous improvement.
 
Manager Notes: 
Relocation assistance is available for candidates over 50 miles away
Would like to see candidates from larger manufacturing companies that bring in newer technology on a regular basis .
Primary function of this job is capital projects, replacing older manufacturing equipment (15-20 years old) with new equipment
Equipment will include:  CNC, Brake Press, Welding, Forming, Laser Cutting
Will not be programming the equipment, just need to have a good understanding of fixturing and tooling and be able to manage capital upgrade projects from cradle to grave

Please send resume to rchaudhary@iconma.com
 
Job Number: 18-02757
Job Location: Chicago, IL
Rate: Open
Per Diem: NA
Overtime: Possible
Duration: Direct (Full time)
Start Date: ASAP
Input Date: 02/19/2018
Last Updated: 02/23/2018
Firm Name: ICONMA LLC
Attention: Rohit
Address: 1201 PACIFIC AVE STE 600
City, State: TACOMA, WA 98402
Phone: 253/213-2012
Website: www.iconma.com

Mechanic

Description:
Perform maintenance in support of manufacturing facility on a variety of equipment throughout facility including machinery repairs, preventative maintenance, machine relocation, fabrication, welding, electrical repair and installation, plumbing (air, hydraulic, water) with use of a variety of equipment.  Responsible for monitoring hazardous waste for removal, maintenance of chemical storage area and clean up of chemical spills as required.  Nontoxic or non-hazardous.  Mainly Soap and/or grease
Will be operating a crane or fork lift.
 
Responsibilities:
Provide maintenance support in all areas of manufacturing facility including but not limited to machinery repairs, preventative maintenance, machine relocation, fabrication, welding, electrical repair and installation, plumbing (air, hydraulic, water) with use of a variety of equipment such as hand tools, welding equipment, fork lifts, and precision measuring equipment.  Maintain and develop preventative maintenance program for production related equipment.  Required to perform work in compliance to all safety and EHS policies and procedures. 
 
Qualifications:
  • Knowledge of EHS procedures and policies
  • Knowledge and safe use of production related equipment
  • Working knowledge and use of welding, electrical, and plumbing equipment including repair and maintenance of machinery
  • Millwright Skills and familiar with Electrical and/or Hydraulic
  • Able to interpret OEM handbooks and/or plant diagrams
  • Understanding of reading building plans and electrical schematics
  • Ability to use trouble-shooting and precision measuring equipment
  • Where applicable, trained in maintenance processes such as but not limited to welding, plumbing, electrical and mechanical troubleshooting
  • Vocational or technical training in a maintenance related discipline, strongly preferred

 
Training requirements:

  • Demonstrated ability to comply to maintenance safety procedures such as lock-out tags, etc.
  • Demonstrate ability to safely complete job tasks utilizing manual equipment as well as use of gauges needed for repair fabrication
  • Demonstrate ability to perform preventative maintenance, and repair of facilities equipment
  • Where applicable, complete safety and maintenance training and or certification

 
 
 
 
 

 
Job Number: 1610060095
Job Location: KS City, MO
Duration: 12 months
Input Date: 01/25/2017
Last Updated: 09/21/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Eric Khassanov
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002FtZOAA0&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
Mechanical Design Engineer

Fort Worth, TX
1 Year Contract
Pay Rate: $48.25/Hr

Job Description:

• Report to a design lead on the 1018 program
• Perform and/or oversee aspects of engineering standard work throughout Preliminary Design, Detail Design, and Verification/Validation
• Coordination with functional leads to ensure product definition meets customer interface, functional, structural and performance requirements
• Must be fluent with detailed part and assembly definition (FTA) using Catia V5
• Ensure accuracy and adherence to Product Definition Standard Work in the communication of Design Intent through duties which includes: o Understand, apply and interpret Geometric Form Control to ASME Y14.5 & ASME 14.41 standards o Create / review parametric 3D models and other definition files to Design intent and Product Definition standard work using the Catia V5 software
• Types of hardware include products such as. o Hydraulic actuators o Oleo-Pneumatic shock struts (single and dual stage) o Landing gear assemblies o System routings (electrical and hydraulic)
• The engineer will create detail design, developmental and production mechanical documentation such as detail drawings, assembly drawings, engineering change incorporations as part of Technical Data Packages in accordance with contractual specifications and UTAS policies
• Product definition includes: o Associated parts list o Detailed part and assembly definition
• Experience with SMARTEAM PDM & MATRIX ONE for the approval and release of part definition and engineering changes (configuration management)
• Support drawing release schedule.
• Assist with driving improvements and harmonizing Acceptance Test Procedures using MS Word/MS Excel
• Drive improvements into daily activities, striving for right the first time and on time all the time (LEAN principles)
• Kinematics analysis using Catia V5
• Weight impact
• Tolerance stack-up evaluation

Basic Qualifications:

• ***BS in Mechanical or Aerospace Engineering***
• 10+ years design experience with a background in kinematics, mechanics and aeronautics.
• Proficient in Catia V5 detailed modeling (kinematics and systems routings a plus) and FTA generation, layouts and checking experience.
• Working knowledge of materials and surface treatments.
• Strong communication skills.
• US citizen, permanent resident alien or able to review all export-controlled technical information.
• Knowledgeable of hydraulic actuator/system design, forgings, layouts, mechanical system and structural design (fatigue and static).
• Proficient with GD&T (ASME Y14.5, ASME Y14.100 and Y14.41).
• Landing gear and/or hydraulic actuator design experience.
• Open minded, pro-active, quick learning ability and strong desire to learn
• Experience using SMARTeam – PDM
• Experience using MATRIX ONE – PLM
 
Job Number: 8507
Job Location: Fort Worth, TX
Rate: 48.25
Per Diem: No
Overtime: Possible
Duration: 1 Year
Start Date: ASAP
Input Date: 03/12/2018
Last Updated: 03/12/2018
Firm Name: INCONEN CORPORATION
Attention: Brad
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
Mechanical Design Engineer

Fort Worth, TX
1 Year Contract
$48.25-60.00/Hr

***NO PER DIEM SPLIT***
***LANDING GEAR AND HYDRAULIC ROUTING A MUST HAVE***
***BACHELOR'S DEGREE MECHANICAL/AEROSPACE ENGINEERING OR RELATED DISCIPLINE IS REQUIRED***

• Perform and/or oversee aspects of engineering standard work throughout Preliminary Design, Detail Design, and Verification/Validation
• Coordination with functional leads to ensure product definition meets customer interface, functional, structural and performance requirements
• Must be fluent with detailed part and assembly definition (FTA) using Catia V5
• Ensure accuracy and adherence to Product Definition Standard Work in the communication of Design Intent through duties which includes:

o Understand, apply and interpret Geometric Form Control to ASME Y14.5 & ASME 14.41 standards o Create / review parametric 3D models and other definition files to Design intent and Product Definition standard work using the Catia V5 software

• Types of hardware include products such as. o Hydraulic actuators o Oleo-Pneumatic shock struts (single and dual stage)
o Landing gear assemblies o System routings (electrical and hydraulic)
• The engineer will create detail design, developmental and production mechanical documentation such as detail drawings, assembly drawings, engineering change incorporations as part of Technical Data Packages in accordance with contractual specifications and UTAS policies
• Product definition includes:

o Associated parts list
o Detailed part and assembly definition

• Experience with SMARTEAM PDM & MATRIX ONE for the approval and release of part definition and engineering changes (configuration management)
• Support drawing release schedule.
• Assist with driving improvements and harmonizing Acceptance Test Procedures using MS Word/MS Excel
• Drive improvements into daily activities, striving for right the first time and on time all the time (LEAN principles)
• Kinematics analysis using Catia V5
• Weight impact
• Tolerance stack-up evaluation REQ REFRESH

Additional Information:
10+ years design experience with a background in kinematics, mechanics and aeronautics.
• Proficient in Catia V5 detailed modeling (kinematics and systems routings a plus) and FTA generation, layouts and checking experience.
• Working knowledge of materials and surface treatments.
• Strong communication skills.
• US citizen, permanent resident alien or able to review all export-controlled technical information.
• Knowledgeable of hydraulic actuator/system design, forgings, layouts, mechanical system and structural design (fatigue and static).
• Proficient with GD&T (ASME Y14.5, ASME Y14.100 and Y14.41).
• Landing gear and/or hydraulic actuator design experience.
• Open minded, pro-active, quick learning ability and strong desire to learn
• Experience using SMARTeam – PDM • Experience using MATRIX ONE – PLM
 
Job Number: 8651
Job Location: Fort Worth, TX
Rate: 48.25-60.00
Per Diem: No
Overtime: Possible
Duration: 1 Year
Start Date: ASAP
Input Date: 03/02/2018
Last Updated: 03/14/2018
Firm Name: INCONEN CORPORATION
Attention: Brad
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
Mechanical Design Engineer

Independence, OH
1 Year Contract
$48.25-60.00/Hr

1st Shift

***W2 Contract Work Only***

*****BACHELOR'S DEGREE MECHANICAL/AEROSPACE ENGINEERING OR RELATED DISCIPLINE IS REQUIRED*****

• Perform and/or oversee aspects of engineering standard work throughout Preliminary Design, Detail Design, and Verification/Validation
• Coordination with functional leads to ensure product definition meets customer interface, functional, structural and performance requirements
• Must be fluent with detailed part and assembly definition (FTA) using Catia V5
• Ensure accuracy and adherence to Product Definition Standard Work in the communication of Design Intent through duties which includes:
o Understand, apply and interpret Geometric Form Control to ASME Y14.5 & ASME 14.41 standards
o Create / review parametric 3D models and other definition files to Design intent and Product Definition standard work using the Catia V5 software
• Types of hardware include products such as.
o Hydraulic actuators
o Oleo-Pneumatic shock struts (single and dual stage) o Landing gear assemblies
o System routings (electrical and hydraulic)
• The engineer will create detail design, developmental and production mechanical documentation such as detail drawings, assembly drawings, engineering change incorporations as part of Technical Data Packages in accordance with contractual specifications and UTAS policies
• Product definition includes: o Associated parts list o Detailed part and assembly definition
• Experience with SMARTEAM PDM & MATRIX ONE for the approval and release of part definition and engineering changes (configuration management)
• Support drawing release schedule.
• Assist with driving improvements and harmonizing Acceptance Test Procedures using MS Word/MS Excel
• Drive improvements into daily activities, striving for right the first time and on time all the time (LEAN principles)
• Kinematics analysis using Catia V5
• Weight impact, Tolerance stack-up evaluation

10+ years design experience with a background in kinematics, mechanics and aeronautics.
• Proficient in Catia V5 detailed modeling (kinematics and systems routings a plus) and FTA generation, layouts and checking experience.
• Working knowledge of materials and surface treatments.
• Strong communication skills. • US citizen, permanent resident alien or able to review all export-controlled technical information.
• Knowledgeable of hydraulic actuator/system design, forgings, layouts, mechanical system and structural design (fatigue and static).
• Proficient with GD&T (ASME Y14.5, ASME Y14.100 and Y14.41).
• Landing gear and/or hydraulic actuator design experience.
• Open minded, pro-active, quick learning ability and strong desire to learn
• Experience using SMARTeam – PDM
• Experience using MATRIX ONE – PLM
 
Job Number: 8621
Job Location: Indendence, OH
Rate: $48.25-60.00
Per Diem: No
Overtime: Possible
Duration: 1 Year
Start Date: ASAP
Input Date: 03/02/2018
Last Updated: 03/14/2018
Firm Name: INCONEN CORPORATION
Attention: Brad
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer - Level 2

Description:
Location: Fort Walton Beach, FL
Rate: $25.00 - $50.00/HR
Duration: 6 month contract
Shift: 1st Shift
Overtime: Exempt

*****MUST have an Active Secret Clearance or to have had one within the last 2 years*****

Description
Researches, plans, designs and develops mechanical products and systems such as instruments, controls, robots, engines, machines and mechanical, thermal hydraulic or heat transfer systems for production, transmission, measurement, and use of energy. Applies research to the planning, design, development, and testing of mechanical and/or electromechanical systems, instruments, controls, engines, and/or machines.

Skill/Experience/Education
Mandatory:
*****MUST have an Active Secret Clearance or to have had one within the last 2 years*****
Mechanical Engineer. A-Shift. On aircraft and off-aircraft operational requirements. Schedule In this role, the employee will review designs for ease of manufacturing and work closely with design engineering for improvements. The employee will use their knowledge of interpreting and reading engineering design drawings to develop fabrication routers/work instructions. This role will also require the employee to develop bill of materials (BOMs) based on drawing parts lists. The employee will work with manufacturing on issues and process improvements

Desired:
*****MUST have an Active Secret Clearance or to have had one within the last 2 years*****
Jobscope experience TeamCenter Engineering experience Production Engineering experience Production Operations experience Mechanical Experience Electrical Experience Aircraft Experience Experience with Lean Six Sigma practices SOF CLSS contract, facility, and customer knowledge Active Secret Security Clearance within the last 2 years. Ability to read and interpret engineering drawings. Excellent verbal and written communications skills
 
Job Number: 8661
Job Location: Fort Walton Beach, FL
Rate: $25.00 - $50.00/HR
Per Diem: Split Possible
Overtime: Exempt
Duration: 6 mos
Start Date: ASAP
Input Date: 02/21/2018
Last Updated: 04/13/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Systems DER

Description:
Dept. 660 Mechanical Systems DER

Position Purpose:
Responsible for the design, research and development of advanced new applications resulting in new product/business for the company.

Unique Skills:
• DER for Cockpit Arrangements and Cabin Arrangements
• Mechanical Chart of Authority should mention Cockpit Arrangements
• Electrical Chart of Authority should mention mechanical aspects for electrical installations
• Authority required on Part 25 Chart C1 : A1, A2, A7, D1, D2, D7, E1, E2, E7, K1, K2, K7, N1, N2 and N7
• Authority required on Part 25 Chart C2 : I1, I2, I4, L1, L2, and L4

Education and Experience Requirements:
• Bachelor's Degree in engineering, a related curriculum required or equivalent combination of appropriate education and experience sufficient to successfully perform the essential functions of the job.
• Fifteen (15)+ years progressively responsible engineering exp in specific tech discipline with Bachelors. Exp credit considered for related adv degrees limited to 2 yrs Masters, 4 yrs PhD in fields applicable to this job.
• Requires approval of Eng PRB incl bus justification.

Essential Functions:
• Plans R&D programs and recommends technological application programs to meet corporate objectives
• Proactively promotes process initiatives that improve the balance of technical product, cost and schedule
• Applies cutting edge theories and technologies by exhibiting an exceptional degree of ingenuity, creativity and resourcefulness
• Champions and develops innovative principles and ideas
• Often acts independently and exercises wide latitude in determining objectives and approaches to critical assignments
• As a recognized expert in the field, provides consultative services to senior/executive leaders both within the company and the industry
• Perform other duties as assigned.
• Advanced degree in engineering or related curriculum preferred
• The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 24-226
Job Location: Savannah, GA
Rate: $135.00
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 02/22/2018
Last Updated: 06/22/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
PCB Designer-Anaheim, CA

Description:
*Maintains and defines library symbols and footprints per electrical engineering guidelines.
*Prepares detailed layouts of the printed circuit board and establishes all electrical functionality (current carrying, isolation requirements, stack-up, etc.).
*Prepares all necessary artwork /electronic data required for the complete fabrication of the printed circuit board.
*Generates complete assembly drawings and prepares parts list IAW customer requirements to permit parts procurement and assembly.
*Interfaces with PCB manufacturers to resolve any problems related to design.
*Interfaces with mechanical and electrical engineering to establish physical and electrical parameters to meet packaging requirements.
*Reviews electronic schematic data for initial appraisal of proposed design and estimates hours to completion.
*Responsible for adequacy and accuracy of all support documentation and proposed changes to PC boards.
*Prepares mechanical layouts as required to establish design concepts related to PC board layouts, fabrication, and assembly documentation.
*Resolves technical issues related to PCB design and assists design group with solutions.
*Manage all aspects of PCB Design(s) from start to finish utilizing internal or external support resources.
*Reports status of work in process as required by supervisor.

Requirements:
*IPC Certified.
*High school graduate or equivalent (G.E.D.) plus specialized technical training.
*Minimum 10+ years general experience directly related to PCB/PWA design.
*Expert using Cadence software: OrCAD Capture CIS, OrCAD PCB Editor and Allegro PCB Designer are a must.
*Expert with the knowledge and application of Mil-Specifications and contracting.
*Expert with the knowledge and application of IPC Standards.
*Excellent written and verbal communications skills are required.
*Must manage multiple projects simultaneously.
*Expert using PCB design software tools.
*PCB Supervision experience desired

Benefits: Visit http://www.teamglobal.com/benefits.html for more details.
 
Job Number: 127296
Job Location: Anaheim, CA
Start Date: ASAP
Input Date: 03/21/2018
Last Updated: 03/29/2018
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: GCP Recruiter
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Principal Software Engineer - Active Secret Clearance / C/C++/ IMS / test / architecture / Green Hills Integrity / Agile Scrum or Waterfall CA

Description:
Principal Software Engineer - Clearance (8006788) - Raytheon
Secret Clearance

El Segundo, CA
75-85/hr DOE


Raytheon Secure Information Systems is seeking a Senior SW Engineer with C/C++ development skills needed to support multiple programs.

Role and Responsibilities include the following areas:
• Execute to program requirements. Ensure that cost and schedule commitments are being met to ensure on time delivery of the end product deliverables
• Debug, troubleshoot, issue investigation, find root cause and provide corrective action determination to address integration issues
• Interface directly with Raytheon management team and customers in meetings and reviews
• Expand and influence program developments by working closely with the program managers and other engineers to process direction for the program
• Provide weekly reporting of key programmatic milestones in accordance with the program plan, while insuring risk mitigation throughout the program

Required Experience, Knowledge and/or Skills:
• 8 years software development experience
• Proven experience performing as a Senior SW Engineer for software development teams
• Proven experience in using Green Hills Integrity
• Proven experience spanning software architecture, design and system integration with experience developing embedded software utilizing C and C++
• Proven experience in leading teams using Waterfall and/or Agile Scrum methodology
• Proven experience in writing software test plan and test procedures
• Ability to support engineering team members on various programs
• Ability to multi-task, to support multiple customers, and to work within specific schedule and cost constraints
• Strong organizational skills and ability to motivate and lead a team
• Possess and demonstrate excellent interpersonal, presentation and verbal/written communication skills
• Excellent time management skills
• Active DOD Secret Clearance and be able to obtain Top Secret Clearance
• U.S. Citizenship is required
• Ability to access to US only data systems

Desired Experience, Knowledge, and/or Skills:
• Certified EVMS
• Experience working with IMS (Integrated Master Schedule)
• Experience with Green Hills Integrity
• Experience with KIV-7M product
• Experience with Raytheon’s Development Process
• Experience in Waterfall and Agile/Scrum, Continuous Integration Environments
• Experience with requirements management using DOORS
• Experience with configuration management using MKS and Git
• Software or Systems Engineering Integration expertise

Required Education Requirement: B.S. Computer Science, Computer Engineering, Software Engineering, Electrical Engineering or other Engineering discipline

Desired Education Requirement: M.S. in Computer Science, Computer Engineering, or Electrical Engineering

This position requires a U.S. person or the ability to obtain an Export Authorization from the appropriate government agency for non-U.S. persons U.S. Citizenship status is required as this position needs an active U.S. Security Clearance as of day one of employment
 
Job Number: MB-8006788
Job Location: El Segundo, CA
Rate: 75-85/hr
Duration: 3-12 months
Start Date: contract to hire
Input Date: 03/07/2018
Last Updated: 03/20/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Principal Test Engineer - Active Secret Clearance / TCP/IP UDP Labview CA

Description:
Principal Test Engineer - Clearance (8006624) - Raytheon - El Segundo CA
Secret Clearance

3-6 Month CTH

The Secure Information Systems organization requires a Systems Integration and Test (I&T) Engineer to expend the existing team of engineers due to increase in demand for our services. The successful candidate will be responsible for the technical leadership, of I&T activities for assigned program(s).

Required Skills:
• Minimum 8 years of combined experience in the field of hardware/software development and Integration/Testing of complex systems
• Minimum of 2 years of experience in technical leadership, cost, and schedule management associated with integration and testing activities on complex programs
• Write highly complex test procedures and protocols to assess product reliability and evaluate the ability of products to meet performance standards and specifications
• Previous experience with real time embedded systems development and debugging
• Previous experience with systems requirements verification and validation process
• Develop complex test simulations to evaluate how products react under different conditions and analyze product failure to assess the integrity and reliability of product performance. Debugs complex test hardware and software
• Write test scripts such as python and LabView on complex test stations
• Understand networking protocols such as TCP/IP, UDP, ARP, and ICMP
• Prior experience in the technological spaces the work requires
• Active DoD Secret Clearance required
• U.S. Citizenship is a requirement

Desired Skills:
• Experience with CMMI and EVMS processes

Required Education:
Bachelors in Computer Science, Computer Engineering, Electrical Engineering, or equivalent, advanced degree desirable
 
Job Number: MB-8006624
Job Location: El Segundo, CA
Rate: 75-85/hr
Duration: 3-6 months
Start Date: contract to hire
Input Date: 03/07/2018
Last Updated: 03/20/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Priority Manufacturing Planner Positions in Washington State

Description:
Manufacturing Planner 3 – Position 1 (Structures)

Location: Everett, WA & Renton, WA
Duration: 9 months

Job Description:
Develops, implements and maintains various manufacturing plans, Bill of Materials, work instructions and illustrations to define and document as-built configuration. Develops manufacturing concepts and strategies to support business objectives. Develops and integrates suppliers, processes, materials, data and technology to meet manufacturing and delivery requirements. Reviews and approves supplier data to ensure manufacturing related requirements are met. Develops tooling requirements based on manufacturing and engineering requirements. Manages tools from initial design to end of use disposition. Investigates and resolves manufacturing related issues. Performs producibility assessments for part or product designs. Provides producibility input to design, manufacturing processes and manufacturing technologies to meet cost and schedules. Develops integrated work statements and sequencing of events to support delivery commitments. Drafts, updates and reviews processes and procedures to support business and regulatory agency requirements. Works under general direction.

Education / Experience:
AA degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience.

Skill Code: 67E-Structures



Manufacturing Planner 3- Position 3 (Composites Non-Metallic)

Location: Everett, WA
Duration: 9 months

Job Description:
Develops, implements and maintains various manufacturing plans, Bill of Materials, work instructions and illustrations to define and document as-built configuration. Develops manufacturing concepts and strategies to support business objectives. Develops and integrates suppliers, processes, materials, data and technology to meet manufacturing and delivery requirements. Reviews and approves supplier data to ensure manufacturing related requirements are met. Develops tooling requirements based on manufacturing and engineering requirements. Manages tools from initial design to end of use disposition. Investigates and resolves manufacturing related issues. Performs producibility assessments for part or product designs. Provides producibility input to design, manufacturing processes and manufacturing technologies to meet cost and schedules. Develops integrated work statements and sequencing of events to support delivery commitments. Drafts, updates and reviews processes and procedures to support business and regulatory agency requirements. Works under general direction.

Education / Experience:
AA degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience.



Manufacturing Planner 3- Position 3 (Electrical)

Location: Everett, WA
Duration: 9 months

Responsibilities include the following:
- Develop, implement and maintain various manufacturing plans, Bill of Materials, work instructions and illustrations to define and document as-built configuration.
- Assist with development and integration of suppliers, processes, materials, data and technology to meet manufacturing and delivery requirements.
- Assist in reviewing supplier data to ensure manufacturing related requirements are met.
- Identifies tooling requirements and initiates tooling orders based on manufacturing and engineering requirements.
- Assist in tooling dispositions.
- Investigate and resolve manufacturing related issues of limited scope.
- Assist with producibility assessments for part or product designs.
- Assist in providing input to design, manufacturing processes and manufacturing technologies to meet cost and schedules.
- Develop work statements and sequencing of events to support delivery commitments.
- Assist in the review, maintenance and monitoring of internal documents.
- Provide ship side support, research and shop assistance

Preferred Qualifications:
- Basic understanding of wiring and wire routing
- - Experience with wire bundle fabrication concepts, wire installation, electrical equipment installation and installation of wiring provisions.
Experience in Teamcenter
- Experience using Manufacturing Execution Systems (CMES)
- WIRS: Wires Information Release System
- CAPP II

Education / Experience:
AA degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience.

Skill Code:
67B-Electrical/Electronics
 
Job Location: Everett, WA
Rate: Open
Per Diem: Split
Overtime: Yes
Duration: 9 months
Start Date: Asap
Input Date: 03/06/2018
Last Updated: 03/30/2018
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Product Repair/Mod Tech D

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Product Repair/Mod Tech D
(U.S. Citizenship Required*)
Tinker AFB, OK
2018-5578

Responsibilities:
• Lead Technician: lead assembly, disassembly and modification of systems by overseeing change, removal, replacement or upgrade of aerospace vehicle components to correct failures or implement changes.
• Oversee assembly, disassembly or overhaul.
• Configure aerospace vehicles, ground support and bench test equipment.
• Direct troubleshooting of complex pneumatic, hydraulic and electrical systems to isolate mechanical or electrical faults and repair faulty components.
• Oversee systems and components validation/verification testing.
• Document procedures and established processes to ensure contractual and regulatory compliance (e.g., repairs, test results, applicable modifications and inspection results).
• Inspect components and verify repairs for flight worthiness requirements.
• Lead and supervise others to perform tasks associated with the safe handling of an aerospace vehicle (e.g. jacking, towing, system operations).
• Provide training and mentor others.
• Position will be first, second or third shift; be cross utilized to perform servicing and team member activities; travel to support remote maintenance activities, and/or modification of forward deployed aircraft.

Qualification:
• Required – Active Secret Clearance. Candidates without this clearance will not be considered.
• Required – Willing and able to deploy/travel, on short notice to domestic/international locations, for a variety of durations, to meet customer needs and work statement, at the sole discretion of leadership. Unless compelling reasons exist, failure to deploy/travel will be considered as a resignation.
• Knowledgeable in planning & leading all aspects of