Job Search Results

545 listings were found that matched your search words: Keywords: Aerospace ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2018/10/18 Thursday 02:50AM Pacific Time by ContractJobHunter. )

Listings 1 - 545

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2231 - ELECTRICAL HARNESS DESIGNER - resume - word doc only

Description:
Produce and deliver Harness Data Reports based on Digital Mock-up and Mentor Graphics.

Integrate the design of the wire harnesses.

Incorporate changes (RFC, PCR) on the harness data reports.

Contribute to the team effort by meeting the team%u2019s objectives for productivity and quality.

Contribute to other relevant tasks needed to support the team%u2019s objectives.

Have a University degree in aircraft avionics or electrical engineering or equivalent work experience in wiring integration.

Have experience with harness manufacturing or methods.

Have a minimum of 5 years of relevant working experience in aerospace.

Have wiring design, wiring installation and/or wiring troubleshooting experience.

Mentor Graphics Harness XC tool knowledge is the primary requirement.

Also have experience with Catia V5.

Have a strong sense of responsibility and have good organization skills.

Must have excellent communication skills including the ability to read/write in English.

Are comfortable working with MS office suite.

Are familiar with BM%u2019s, RAE documents and BAPS related to harnesses.

Communicate clearly and openly with your team.

Embrace changes and new ideas.

Are persistent to reach your goals.

Seek out and accept feedback.
 
Job Number: 2231
Job Location: Montreal, Canada
Rate: 61.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 07/27/2017
Last Updated: 01/26/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2299 - FLAMMABILITY ANALYST - cv. word doc only

Description:
Analyze engineering drawings (2D and 3D) in order to establish the configurations to be tested

Prepare test plans and compile tests results in technical reports

Witness flammability tests in the department lab

Understand and apply airworthiness flammability standards of Transport Canada, FAA and EASA, particularly FAR 25.853

Provide flammability expertise to engineering teams and other departments of the Global Completion Center

Solve technical problems related to flammability of the Global business jet interiors

Support the production unit of the Global Completion Center Flammability team

DEC or university degree in mechanical engineering or aerospace

Experience in engineering or aircraft interiors

Ability to analyze engineering drawings

Good knowledge of Office tools (Excel, Access, Word)

A team player and you have capacity to work under pressure

Have Problem solving skills

Excellent communication skills (French & English)

Knowledge of the Federal Aviation Regulations (FAR), more specifically FAR 25.853, an asset

Experience with CATIA V5, an asset
 
Job Number: 2299
Job Location: Montreal, Canada
Rate: 60.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 01/04/2018
Last Updated: 01/26/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2303 - PROPULSION SYSTEMS ENGINEER - cv, word doc only

Description:
Coordinate product development activities between the supplier of the system and the affected work packages.

Ensure successful design, validation, certification and delivery of the system.

Ensure successful completion of each development phase deliverables (may author, review, approve).

Problem solve the technical issues in a cross functional environment.

Duties include:

Design and integration of the system;

Review of design and documentation of all the aspects related to your system;

Checking for quality of the Supplier's analyses;

Validation and verification of system requirements;

Validation and verification of system performance through design reviews, analyses, rig and aircraft testing;

Definition, preparation and execution of qualification and certification tests;

Working with supplier in the investigation and resolution of test findings;

Preparation or review of qualification or certification reports;

Working with suppliers to establish complete system requirements and system interfaces;

Liaison with stress, loads, reliability, maintainability and safety (RM&S), simulation, customer and operations support departments;

Identify issues and obstacles, follow-up and communicate progress;

Prepare reports or presentations.

Bachelor or Master's (preferred) degree in Mechanical or Aerospace Engineering with a relevant experience of a minimum of 5 to 8 years.

Must have a good knowledge of propulsion systems and their integration on the aircraft.

Have a background in design, integration, development and certification of Propulsion Systems.

Cognizant of the relevant Airworthiness Regulations and certification process.

Have knowledge of MS Office software (essential).

Familiar with Part 25 Regulations and certification requirements.

Flight testing/testing experience an asset.

Good oral and technical writing skills in English (required) and knowledge of French is an asset.

Motivated, self-starter, organized, autonomous and able to work under limited supervision.

Team player: able to work with suppliers and customers.

Must be dynamic, use initiative, have a strong sense of responsibility and good judgment.

Flexibility is expected: (may be on-call, shift-work, rotational work, weekends, odd hours, etc).
 
Job Number: 2303
Job Location: Toronto, Canada
Rate: 58.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/30/2017
Last Updated: 01/26/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2304 - AVIONICS SYSTEMS ENGINEER - cv. word doc only

Description:
Support of Compliance to Certification Authority; author Certification Plans

Provide specialist advice relating to test methods and procedures

Review testing readiness and conformities of assigned systems

Review qualification, ground and flight test data of assigned systems

Review flight test reports containing data demonstrating proper system operation as required by Certification Authorities Regulations

Review and Sign flight release documentation (including safety of flight judgments)

Review system performance analysis to ensure proper compliance to regulations

Coordinate with other Certification Authority Delegates for integrated functions (ie, Human Factor, Pilots, et al)

May provide technical leadership to a small engineering team for dedicated technical investigation / test.

Bachelor's degree in Avionics / Electrical/ Aerospace Engineering, plus 12-15 years' experience in Avionics systems design and certification.

Able to obtain a Certification Authority Delegation for assigned systems

Working knowledge of Rockwell Collins Proline 21 or Fusion Avionics Systems would be advantageous.

Must have excellent communication skills in English - both written and oral and be PC literate.

Experience in flight-testing of civil aircraft; and knowledge of TCCA, FAA, and EASA certification requirements (ie, FAA CFR Part 25) required.

Mirabel is just outside Montreal, Canada.
 
Job Number: 2304
Job Location: Montreal/Mirabel, Canada
Rate: $63.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 12/03/2017
Last Updated: 04/11/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

3 Aircraft Stress Engineers with Composites

Description:
3 Aircraft Stress Engineers Needed.
Require 10+ years of aircraft/aerospace stress analysis with a good composites background.
Previous FEMAP experience is a plus.
Composite airframe analysis experience a MUST.
MUST be US Persons

Qualifications:
-Experience in aircraft or spacecraft composite, design and analysis processes
-Knowledge of composites manufacturing and sizing of composite structures using FEA models, including pre and post processing of NASTRAN models and associated sizing of composite structures
-Minimum 10 years or more of applicable experience in the analysis of structural systems using strength of materials and finite element based methods
-Experience with free-body diagrams and classical stress analysis techniques
-Experience with FEMAP
-Rapid prototyping experience a strong plus
-Excellent computer skills, including Outlook, Word, Excel and PowerPoint
-Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired
-Applicants must be U.S. persons as defined by ITAR
Educational Requirements-
Bachelors degree from an accredited institution, with a concentration in a relevant Engineering discipline

The Structures Company is an AA/EOE.
 
Job Location: Mojave, CA
Rate: $75-85/hr
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 10/17/2018
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: chrissheets@thestructurescompany.com
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
A&P Mechanic

Description:
Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM’s. They are a mid-size but rapidly growing company in Seattle, WA that was founded in 2001. They have a new flight test facility in Moses Lake WA. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.

The strategic purpose of the Test and Evaluation (T&E) Support Unit is to provide comprehensive, full-service aerospace flight-testing and evaluation services. The Test and Evaluation Support Unit provides four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations. This position is responsible for maintenance support of all flight operations

Primary Role: Performing routine and periodic maintenance throughout all phases of flight testing; maintaining quality and safety standards; keeping records; maintaining equipment and supplies.

Secondary Role: Support flight test engineers and ground operations personnel as necessary by helping to install test instrumentation, wiring, and custom manufactured hardware.


Job Duties and Responsibilities:
Perform daily pre and post flight inspections.
Perform routine servicing of aircraft systems.
Perform aircraft systems checks and calibration as required.
Trouble shoot and repair pre and post flight squawks in a timely manner.
Assist in the installation and removal of essential flight test instrumentation hardware and wiring.
Routine removal of panels to route and access flight test instrumentation wires and hardware.
Maintain safe operations and workspace.
Maintain equipment by completing preventive maintenance requirements; following manufacturer's instructions; troubleshooting malfunctions; calling for repairs.
Knowledge/Skills/Abilities:

Experience in maintenance support related to flight test is desired but not required.
Experience with or willing to learn working in a flight test environment.
Professional mannerisms, appearance and actions (self-confident and committed to high ethics).
Strong organizational, time management and prioritization skills:

Education
High School Diploma
Formal training in Aviation Maintenance Technologies or other related field
A & P Certificate or equivalent Certificate
1-5 years minimum experience maintaining commercial and/or regional aircraft
 
Job Location: Moses Lake, WA
Rate: open
Per Diem: Possible
Overtime: Yes
Duration: 2-3 years or direct
Start Date: Now
Input Date: 12/28/2017
Last Updated: 01/23/2018
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aero Thermal Fluids Analyst

Description:
Location: Jupiter, FL
Rate: $60.00 - $62.00/HR
Duration: 1 year contract
Shift: 1st Shift

**Candidates must either have an Active Secret Clearance or have had a Secret clearance in the last two years **
** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

Duties:
**Candidates must either have an Active Secret Clearance or have had a Secret clearance in the last two years **
-Conduct aerothermodynamic and heat transfer design and analysis of hypersonic air-breathing propulsion systems (ramjets/scramjets) and/or liquid rocket engines.
-Develop thermal models to design and analyze cooled and un-cooled engine components.
-Develop fluid flow models using Computational Fluid Dynamics codes or other analytical tools.
-Design, test and analyze data from component rigs to supplement or validate analytical models.
-Support planning and testing of engines (ground and flight) and analyze the test data.
-Document work performed in the form of reports and briefings.

Skills:
**Candidates must either have an Active Secret Clearance or have had a Secret clearance in the last two years **
-Knowledge of aerothermodynamics and heat transfer as applied to scramjet and/or liquid rocket engine systems, including turbomachinery and combustion devices.
-High proficiency levels in ANSYS Mechanical or Workbench heat transfer analysis tools, ANSYS CFX, FLUENT or comparable CFD codes.

Education:
**Candidates must either have an Active Secret Clearance or have had a Secret clearance in the last two years **
- B.S. degree or higher in Mechanical or Aerospace engineering, or equivalent engineering
 
Job Number: 7854
Job Location: Savannah, GA
Rate: $60.00 - $62.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 10/23/2017
Last Updated: 02/19/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aero Thermal Fluids Analyst with active secret / ANSYS heat transfer CFD aerothermodynamics liquid rocket engine systems turbomachinery combustion devices URGENT FL

Description:
160246/7337135

Job Title: Aero Thermal Fluids Analyst
62.86/hr


Number of Positions: 3
Remaining Positions: 3
Duties: ** Candidates must either have a current Secret clearance or have had a Secret clearance in the last two years **

** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

** Selected candidates for Jupiter, FL roles must be onboarded through one of these approved background check providers: EIS, First Advantage or Sterling / Talentwise. See attachment for specific background check onboarding requirements **


-Conduct aerothermodynamic and heat transfer design and analysis of hypersonic air-breathing propulsion systems (ramjets/scramjets) and/or liquid rocket engines.
-Develop thermal models to design and analyze cooled and un-cooled engine components.
-Develop fluid flow models using Computational Fluid Dynamics codes or other analytical tools.
-Design, test and analyze data from component rigs to supplement or validate analytical models.
-Support planning and testing of engines (ground and flight) and analyze the test data.
-Document work performed in the form of reports and briefings.
Skills: -Knowledge of aerothermodynamics and heat transfer as applied to scramjet and/or liquid rocket engine systems, including turbomachinery and combustion devices.
-High proficiency levels in ANSYS Mechanical or Workbench heat transfer analysis tools, ANSYS CFX, FLUENT or comparable CFD codes.

Education: B.S. degree or higher in Mechanical or Aerospace engineering, or equivalent engineering


Skills: Required
• ANSYS
• ACTIVE SECRET CLEARANCE

State/Province: Florida
City/Town: Jupiter
Address: 17900 Beeline Hwy


Start Date: 09/18/2017 Hours Per Week: 40.00
Est. End Date: 09/18/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7337135
Job Location: Jupiter, FL
Rate: 62.86/hr max
Duration: 12 month contract
Input Date: 02/22/2018
Last Updated: 02/27/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer / no clearance TX

Description:
Requirement#AERO-REQ-0718
Work LocationPalmdale, CA
Work Week9/80-A
PriorityHigh
Needed Date01/02/2018
End Date12/21/2018
Number of Resources1
Security ClearanceNo Clearance
TitleAeronautical Engineer

Description
Design of structural detail parts, assemblies and installations, as well as, systems installations for peculiar versions of F-35 production aircraft. Engineer shall be responsible for: (1) development of layouts, preparation of engineering drawings, planning, scheduling, and coordination of activities of assigned subordinate engineers, (2) preparation of work statements, quotes and EDAs to support customer requirements, product improvements and cost reductions, and (3) support of manufacturing operations and customers in resolving technical problems related to the aircraft structure and systems. Candidate must be able to coordinate efforts with little or no supervision across a wide range of functional organizations, such as Planning, Tooling, Stress, M&P, R&M, Materiel, Flight Sciences, Test, Manufacturing, and other Design IPTs to ensure that designs meet customer and derived requirements. Some travel and overtime may be required. Candidate must have aerospace design experience with knowledge of configuration management techniques, drafting/drawing conventions, and aerospace specifications and procedures.
Skill/Experience/Education
Mandatory:

9+ years of structural design experience in composite part and bond assembly design. Must be proficient using PDM programs. Must be proficient using CATIA V5. Must be a US Citizen.
Desired:

Bachelor Degree or Higher in an Engineering Discipline. FiberSim experience. Control surfaces and edges design experience. CATIA V4 experience.


Interview RequiredNo
OT AllowedYes (#hours allowed: 20, Pre-Approval Reqd.:No)
TravelNo
Non-Exempt
Rate TypePer Hour
Rates
0-4 YrsPay Rate: 39.00 USD
5-8 YrsPay Rate: 54.00 USD
9+ YrsPay Rate: 74.00 USD
 
Job Number: JE-0718
Job Location: Fort Worth, TX
Rate: 39-74/hr DOE
Duration: 12 month contract
Input Date: 12/07/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Engineer ( Dulles, VA ) 7598203, GNC

Description:
Aerospace Engineer ( Dulles, VA ) 7598203
6 Month Contract

Pay Rate : $80/hr

**Looking for cand. w/ Satellite exp. Need strong GNC background/education/work exp. Exp. designing guidance and controls systems pref. Knowledge of GNC software important.

Cand. w/ hands-on exp. are key. No work from home or contractors who have moved around a lot. Should have steady exp. working with known companies. Looking for at least 10 yrs of exp. 3-5 yrs/fresh outs will not work. Do not want to spend time training unskilled workers.

Cand. will work with Product Lead and report to the Sr. Mgr of Eng.**

Perform spacecraft attitude control systems analysis, design, development and test activities. Design and develop spacecraft Guidance, Navigation and control algorithms using MATLAB and Simulink. Develop subsystem specifications, GNC Flight software and GNC test scripts. Develop and test operations scripts. Document analysis results and create presentation materials.
 
Job Number: 7598203
Job Location: Dulles, VA
Rate: 80
Per Diem: Split
Overtime: Yes
Duration: 6 month
Start Date: ASAP
Input Date: 01/19/2018
Firm Name: TALENTPRO CONSULTING
Attention: Tim
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X101
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Engineering Project Managers - Atlanta, GA

Description:
STS AeroStaff Services is hiring Aerospace Engineering Project Managers in Atlanta, Georgia.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Duties:

• Performs a variety of duties associated with the development and revision of aircraft maintenance work instruction cards
• May utilize an automated publishing system to author certain work instruction cards; others will be done using PC based word processing
• Practices safety-conscious behaviors in all operational processes and procedures

Qualifications:

• Minimum of three years in aircraft maintenance environment plus a minimum of two years in Technical Publications or equivalent training required
• A&P, FCC license, and/or technical degree preferred, or 15 years technical publications experience with working with aircraft/engine manuals, component manuals, or work card authoring
• Experience and ability to read and interpret wiring diagrams and schematics preferred
• Must be able to interpret engineering documents/drawings, analytical reports, Federal Aviation Regulations, Airworthiness Directives and OEM manuals
• Computer experience in MS Office and Adobe products required

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 40774
Job Location: Atlanta, GA
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 12/04/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Materials Estimator

Description:
(85%) Reads and understands RFP requirements and documents and communicates ground rules/assumptions used in proposals. Material Estimators generally perform the following in support of the cost Proposal:

Work with Engineering, Supply Chain and Manufacturing to obtain the latest BOM to initiate the estimating process
Work with Program Management and Integrated Product Teams to determine BOM requirements based on the statement of work including tooling, test units, spares or any materials not identified on the latest BOM.
Work with functional areas to identify excess material attrition/scrap factors
Identify current quote requirements in order to achieve 80% or more of the Proposal BOM (PBOM) if required.
Coordinate with Supply Chain Material Program Managers the supplier quote process
Coordinate with Supply Chain Material Planners current inventory, material transfers and historical part pricing
Review quotes received and populate the PBOM
Incorporate escalation, quantity variance curves and extend pricing for required quantities
Produce PBOM Addendums and other schedules
Focal for all estimates, proposal substantiation, PBOM development, and audit files
Responsible to ensure compliance with FAR/TINA requirements on proposal substantiation, basis of estimates, fact-finding, and negotiations
(15%) Maintains pricing systems and procedures.

Collects, analyzes and stores data for estimating and analysis.
Keeps current with federal acquisition (FAR) regulations and customer requirements.
Assists in developing, maintaining and monitoring estimating and estimating standards, procedures and processes.
Conceives and plans process improvement projects involving the development of new approaches and methods to attain objectives.
May provide input to department objectives and long-range goals.
Keeps current with programs, customers and Aerojet program team.
Plans and performs systems and procedures audits.



Knowledge of basic mathematics and statistics, analytical aptitude, strong oral and written communication skills. Requires familiarity with estimating and pricing procedures, audit methods.
Manufacturing, material planning, finance or supply chain background – or some knowledge of the processes.
Understands difference between Manufacturing and Engineering Drawings/BOMs
MS Office skills including Excel, Word, Access and PowerPoint
Intermediate level Excel knowledge (SUMIF, VLOOKUP, combination formulas, etc.).
Understanding of applicable federal acquisition regulations plus a strong knowledge of current (TINA) disclosure requirements.
Requires a willingness and ability to work extended hours when proposal schedules necessitate.
Basic understanding of Blue Prints / Drawings, Part lists preferred.
Experience and knowledge with EBS ProPricer or other pricing software preferred.
Familiarity with aerospace rocket motor program materials and manufacturing processes is a plus.


Bachelor's degree in engineering, finance, business management or manufacturing operations discipline and six (6) or more years directly related experience, or an equivalent combination of education and experience.
 
Job Number: Aero777
Job Location: Canoga Park, CA
Input Date: 11/29/2017
Firm Name: NESC STAFFING
Attention: Christina Ellis
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
Phone: 603/431-9740
800 Phone: 800/562-3463
Fax Phone: 800/637-2562
Website: www.nesc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Mechanical Design Engineers - Greensboro, NC

Description:
STS AeroStaff Services now offers Aerospace Mechanical Design Engineer jobs in Greensboro, North Carolina.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Summary:

The Manufacturing Engineer position provides technical support for the Design Engineering Group working in areas such as manufacturing, design, development, and testing.

Job Duties:

• Supports work specific to detail parts manufacturing and assembly operations within a manufacturing environment
• Develops documentation and procedures to ensure compliance specific to customer, and regulatory production requirements and specifications
• Interprets engineering drawings to determine requirements meet objectives
• Acts as liaison between design engineering, tooling department, machine shop, metal bond shop, composites and plastics shop, tube shop, manufacturing graphics department, quality and the production floor
• Analyzes statistical data including process capability studies, tests capability studies, and through-put rates
• Provides technical support and assistance with the development and improvement of methods, quality product design, cost, and technical issues as required
• Plans and documents various installation processes, tooling, equipment and quality control methods to optimize the manufacturing operation
• Ensures completed tasks have been performed and inspected in accordance with clien standards
• Identifies and corrects all production and manufacturing issues
• Prepares assembly data sheet and updates planning data sheets
• Assist with BOM identification and control
• Prepares and monitors tool orders and first article inspection sheets
• Details and assembles methods planning and tool manufacturing planning

Education, Experience, Certification and/or Licensure:

• Bachelors' degree in Manufacturing Engineer or other related field strongly preferred
• In lieu of education one year of direct aircraft experience potentially may be substituted for each year of college
• 3+ years’ of experience in Manufacturing Engineering
• 3+ years’ experience in aerospace industry in aerospace manufacturing

Knowledge, Skills and Abilities:

• Working knowledge of or exposure to Lean Manufacturing tools
• Ability to read and interpret engineering drawings and/or specifications requirements
• Excellent oral and written communication skills
• Excellent problem solving skills
• Ability to work in a diverse environment
• Excellent communication and presentation skills.
• Some experience utilizing tools such as SAP, CAD CAM, CATIA, Microsoft Office Suites (Word, Excel, PowerPoint, Project, and Lotus Notes)
• Ability to multitask
• Strong organizational skills

Physical Requirements:

• Incumbents may be routinely exposed to equipment operational noise heat-cold-dust, and/or aircraft equipment, parts, or fuel odors
• Incumbents may be required to stand, sit, squat, walk, bend, move, reach, or stretch for prolonged time periods with no restrictions, as required by job duties
• Work in a safe and professional manner while adhering to all regulatory requirements (FAA, OSHA, DOT, EPA, State, and Federal regulations, etc.)
• Read, hear, speak, and see with no restrictions, as required by job duties
• Comprehend and adhere to management directions and/or safety instructions with no restrictions
• Effectively communicate in Business English language
• Pull, push, carry, lift, or move items up to 10 lbs. throughout the work shift without assistance, as required by job duties
• Pull, push, carry, lift or move materials/people/items/equipment weighing up to 50lbs or more during the work shift, with the use of Company provided “reach assistance technology” or “movement assist technology” (fork-lifts, pallet jacks, pulleys, dolly’s, robotics reach equipment, people movers etc.), as required by job duties

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 40721
Job Location: Greensboro, NC
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 11/27/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Airframe Design Engineer / NX and FiberSIM CA

Description:
Job ID# 14657

Title Airframe Design Engineer
Job Summary General Atomics Aeronautical Systems, Inc. (GA-ASI), an affiliate of General Atomics, is a world leader in proven, reliable remotely piloted aircraft and tactical reconnaissance radars, as well as advanced high-resolution surveillance systems. We recognize and appreciate the value and contributions of individuals with diverse backgrounds and experiences and welcome all qualified individuals to apply.

We have an exciting opportunity for an Airframe Engineer within our Airframe Design Group at General Atomics Aeronautical Systems. This is an airframe design and analysis position in the Advanced Aircraft Engineering Organization located in San Diego, CA. Under the general direction of Engineering management or IPT lead, serve as a member of the airframe design team providing conceptual and detail designs of primary and secondary structural aircraft components. General responsibilities include leading and coordinating the design activities of a team of 1-5 engineers within an assigned project. Establish and communicate clear task expectations. Primary product lines for design activities will be unmanned aerial vehicles, modification of existing aircraft structures and special projects to support sensor integrations.

DUTIES AND RESPONSIBILITIES:•Able to self-prioritize tasks. Works under general direction
•Produce airframe structural configuration layouts and detail designs including preliminary sizing/stress analysis, joint layouts, interface boundary definitions of parts and assemblies employing metallic and composite materials.
•Create and maintain CAD solid models and drawings of installations, assembly and detail components that meet all requirements such as structural integrity, interface boundaries, weight and cost targets as directed by the project engineer.
•Periodically review and check the product structure and BOM’s of the team to insure fit, form, function of the structural components is maintained.
•Conduct periodic design reviews as required to ensure designs meet the requirements.
•Coordinate and collaborate with members of stress, manufacturing, procurement, quality control and other departments as required to mature the design from conception to production.  
•Create and maintain documentation that tracks team weekly progress status as it related to the Program budget and deadlines.
•Prepare PowerPoint presentations to support Program PDRs and CDRs.
Provide technical support and mentorship to those less experience members of the team.

Qualifications Essential Qualifications Typically requires a bachelors degree, masters degree or PhD in engineering or a related technical discipline from an accredited institution and progressive engineering experience as follows; six or more years of experience with a bachelors degree, four or more years of experience with a masters degree, or two or more years with a PhD. May substitute equivalent engineering experience in lieu of education. Must have a thorough understanding of engineering concepts, principles, codes, and theory; experience demonstrating a broad application of those concepts; and, expanding knowledge of principles, concepts, theory, and practices in related technical specialties. Must possess the ability to develop and communicate new concepts; apply them accurately throughout an evolving environment; organize, schedule, and coordinate work phases; and, determine the appropriate approach at the task level or, with assistance, at the project level to provide solutions to a range of complex problems. Must have strong communication, computer, documentation, presentation, and interpersonal skills, ability to work independently and as part of a team; able to perform complex tasks in one or more engineering areas; capable of representing the organization as a prime technical contact and, lead a team of moderately experienced professional employees on single component projects. Able to work extended hours as required. A Professional Engineering License and original work published in professional engineering journals are desirable.
Additional Qualifications - Typically requires a bachelors degree, masters degree or PhD in engineering or a related technical discipline from an accredited institution and progressive engineering experience as follows; six or more years of experience with a bachelors degree, four or more years of experience with a masters degree, or two or more years with a PhD. May substitute equivalent engineering experience in lieu of education. BS in Mechanical Engineering, Aerospace Engineering or similar are desired. Advanced degrees highly desirable.
- Experience with the composite part detail process, including composites stacking sequence, lamination theory, honeycomb core, bonded assemblies, manufacturing assembly and fabrication processes, post-cure machining operations desired.
- Familiar with industry standards for the manufacture, repair and assembly of composite components for aerospace.
- Experience with NX and FiberSIM

City San Diego
State California
Travel Percentage Required 0% - 25%
Clearance Required? No
Work Schedule Rule 9/80
Temp Assignment Duration (# of Days) 180
 
Job Number: JE-14657
Job Location: San Diego, CA
Rate: 60/hr max
Duration: 6 month contract
Input Date: 01/10/2018
Last Updated: 01/10/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aviation Warranty Coordinators - Atlanta, GA

Description:
STS AeroStaff Services now offers Aviation Warranty Coordinator jobs in Atlanta, Georgia.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Duties:

• The TechOps Supply Chain Warranty team is seeking an experienced professional responsible for execution of aircraft, component, cabin, and engine warranty claim processes
• The successful candidate will collect information to substantiate warranty claims, and process claims to completion
• The role will also support developing improvements to the efficiency, productivity, and performance of the role
• This role will collaborate with both SCM and cross-divisional Tech Ops stakeholders
• The individual should have a minimum of 3 years’ of experience in an operations environment with a large and diverse complement of employees, and ability to work with minimal supervision and complete ownership of projects
• Practice safety conscious behaviors in all operational processes and procedures

Qualifications:

• Bachelor’s degree in Operations, Management, or Aerospace, Mechanical, Industrial Engineering or related discipline is strongly preferred; equivalent A&P License with 3 years’ airline work experience is acceptable
• Understanding of Supply Chain processes and metrics, ability to influence without authority, and work in a matrix environment is a highly preferred
• Advanced computer, analytical, organizational, written and verbal communication skills is highly preferred
• Experience in database mining in the Hyperion or equivalent environment to identify aircraft parts reliability trends is a strong plus
• Candidates with experience in data science or advanced analytics will be strongly considered
• Must be a strong team player, detail oriented, and exhibit a healthy curiosity or interest in aviation
• Candidate should demonstrate the ability to communicate effectively and structure/deliver presentations targeted toward varied audiences including company leadership
• Must be a self-starter able to work independently with limited supervision and effectively prioritize and deliver on tasks
• Only candidates with strong Microsoft Word, PowerPoint, and Excel skills will be considered for this role
• Must be performing satisfactorily in current role

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 40846
Job Location: Atlanta, GA
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 12/06/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer III / Instrumentation / CREO / MODELCHECK / Harness cable electro-mechanical packaging CA

Description:
7356312
Job Title: Avionics Engineer III / Instrumentation

Number of Positions: 1

Remaining Positions: 1

Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **




** Candidates should have experience with Creo Parametric and Creo Cabling. Experience with Creo Schematics; Windchill; and Modelcheck preferred **



-Support Electro-Mechanical Packaging of complex electrical/electronic assemblies.

-Extensive knowledge of electronic packaging design for harsh environments, with Aerospace and/or military experience.

-Experience is design of cables and harnesses for applications for Aerospace products.

-Proficiency in use of Creo PDM/Link and Windchill.

-Additional proficiency with GD&T and tolerance analysis.



Skills:
Prior experience and detailed knowledge of Windchill PDMLink 10.1 or greater
Previous experience with MODELCHECK preferred
Proficiency with Creo Parametric 2.0 (or greater) with extensive knowledge of:
Large Assembly Management, Simplified Representations, Combination States
Top Down Design with Skeletons including Publish Geometry, Copy Geometry, and Shrinkwraps
Mechanism Design
Advanced part modeling techniques including the use of relations, analysis features, and flexible components
Experience with Creo Cabling including
Utilizing logical reference data (automated routing)
Harness flattening using Creo Harness-MFG extension
Working knowledge of Creo Schematics 2.0 desired including:
Block Diagram to Wiring Diagram Schematic Development (aka “BID to WID”)
Diagram creation utilizing a Central Catalog

Education:
BSME with 10 years of experience or 15 + years of equivalent experience

Skills:
Required

AVIONICS INSTRUMENTATION CREO WINDCHILL GEOMETRIC DIMENSIONING GEOMETRIC TOLERANCING

State/Province: California
City/Town: Canoga Park

Start Date: 11/06/2017 Hours Per Week: 40.00
Est. End Date: 05/06/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7356312
Job Location: Canoga Park, CA
Rate: 49/hr max
Duration: 6 month contract
Input Date: 11/01/2017
Last Updated: 12/19/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer III/Instrumentation

Description:
Avionics Engineer III / Instrumentation
Canoga Park, CA
Rate: $45-$49


Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **




** Candidates should have experience with Creo Parametric and Creo Cabling. Experience with Creo Schematics; Windchill; and Modelcheck preferred **



-Support Electro-Mechanical Packaging of complex electrical/electronic assemblies.

-Extensive knowledge of electronic packaging design for harsh environments, with Aerospace and/or military experience.

-Experience is design of cables and harnesses for applications for Aerospace products.

-Proficiency in use of Creo PDM/Link and Windchill.

-Additional proficiency with GD&T and tolerance analysis.



Skills: •Prior experience and detailed knowledge of Windchill PDMLink 10.1 or greater ◦Previous experience with MODELCHECK preferred

•Proficiency with Creo Parametric 2.0 (or greater) with extensive knowledge of: ◦Large Assembly Management, Simplified Representations, Combination States
◦Top Down Design with Skeletons including Publish Geometry, Copy Geometry, and Shrinkwraps
◦Mechanism Design
◦Advanced part modeling techniques including the use of relations, analysis features, and flexible components

•Experience with Creo Cabling including ◦Utilizing logical reference data (automated routing)
◦Harness flattening using Creo Harness-MFG extension

•Working knowledge of Creo Schematics 2.0 desired including: ◦Block Diagram to Wiring Diagram Schematic Development (aka “BID to WID”)
◦Diagram creation utilizing a Central Catalog


Education: •BSME with 10 years of experience or 15 + years of equivalent experience
 
Job Number: 8082
Job Location: Canoga Park, CA
Rate: $45-$49
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 10/13/2017
Last Updated: 12/18/2017
Firm Name: INCONEN CORPORATION
Attention: Cathy O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Bleed Air Designer

Description:
The Designer for BAS/VCS is responsible for providing design expertise in support of the Bleed Air System (BAS) and Vapor Cycle System (VCS) through all phases of project schedule including preliminary design, detailed design, development, certification, sustaining, production and product support.

Duties and Responsibilities:
1. Prepare 3D layout models of the BAS and VCS.
2. Prepare 3D installation and detail models of the BAS and VCS.
3. Prepare 2D installation, assembly and detail drawings of the BAS and VCS.

Education, Work Experience, Certification and/or Licensure:
1. Bachelors of Science in Aerospace or Mechanical Engineering from an accredited four year college or university program
2. Minimum 5+ years of directly related design experience in the development and certification of aircraft BAS and VCS.

Knowledge, Skills and Abilities:
1. Experience using CATIA V5 to prepare 3D parametric models and 2D drawings. Minimum of 10,000 hours.
2. Knowledge of one Product Life Cycle Management Tool (e.g. Teamcenter, Enovia,..)
3. Knowledge of 14CFR23 or 25 regulations and advisory circulars related to BAS and VCS regulations required and knowledge of Aircraft BAS and VCS.
 
Job Number: 28-024
Job Location: Greensboro, NC
Rate: Up to $60/hr, DOE
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 09/17/2018
Last Updated: 10/15/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Email: matt@precisionpersonnel.com
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CNC Programmer IV

Description:
Location: Canoga Park, CA
Rate: $40.00 - $44.00/HR
Duration: 1 year contract (possibility of being extended longer)
Shift: 1st Shift


** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


Duties:
Required (MUST show this experience on resume):
** Siemens NX9-NX11 NC Programming experience is required **
** DMU Mori with Siemens 840D Experience ; Specifically DMU80 FD and DMU65 **
** Expertise in Lathe, Millturn, and 5 axis Mill programming of high temp alloy materials **
** Phone AND In-Person interviews are required. Candidates must be able to attend an in-person interview at their own expense **

- 50% - The NC Programmer is responsible for writing new CNC programs, setup instructions, estimating and making changes to existing CNC programs. Will develop, write and maintain NC programs for complex aerospace components using engineering models, drawings and specifications to support a zero defects machining operations environment. Selects program routines for the most efficient machining methods for each part. Will be involved in the prove out of new technology, first article inspection, fixture design, and day to day programming using Siemens NX9-NX11 CAM.
- 10% - Analyzes engineering models/drawings to define the sequence of machining operations to ensure that the design intent and component quality is achieved.
- 5% - Make proper cutting tool selections, taking into consideration such factors as materials, speeds, type of cutters, feeds and control system imitations.
- 10% - Use machine simulation and optimization software to troubleshoot/validate CNC programs and ensure highly efficient and 100% defect-free FTT machining processes.
- 10% - Modify existing parts programs for engineering changes or program improvements.
- 5% - Work closely with Machinists, Quality, Engineering, Management and other team members.
- 5% - Develop, write and maintain type II probe and logic macros to perform on machine touch probe measuring, fixture updates, cutter offset updates, and part feature data collection.
- 5% - Participate in knowledge sharing and cross training activity within the NC programming group.


Skills:
Required (MUST show this experience on resume):
** Siemens NX9-NX11 NC Programming experience is required **
** DMU Mori with Siemens 840D Experience ; Specifically DMU80 FD and DMU65 **
** Expertise in Lathe, Millturn, and 5 axis Mill programming of high temp alloy materials **



Preferred Requirements:
-NX Post Builder expertise
-NX Machine tool Configurator expertise
-Vericut Machine Builder expertise
-Fanuc custom macro programming expertise
-Siemens 840D macro programming expertise

Education:
-Bachelors degree or equivalent experience.
 
Job Number: 8013
Job Location: Canoga Park, CA
Rate: $40.00 - $44.00/HR
Per Diem: Possible
Overtime: Possible
Duration: 1+ yr
Input Date: 10/03/2017
Last Updated: 12/26/2017
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CNC Programmer IV / MUST have Current and Strong NX Programming / local only URGENT CA

Description:
Job Title: CNC Programmer IV
Duties: ** Candidates must be U.S. Citizens **** Permanent residents are NOT eligible for this role **** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


Required (Please screen for these three items and make sure the experience is accurately reflected on resumes):
** Siemens NX9-NX11 NC Programming experience is required **

** DMU Mori with Siemens 840D Experience ; Specifically DMU80 FD and DMU65 **

** Expertise in Lathe, Millturn, and 5 axis Mill programming of high temp alloy materials **

** Candidates above the maximum bill rate will be considered. Please make sure that they are submitted at rates commensurate with their qualificaitons **

** Phone AND In-Person interviews are required. Candidates must be able to attend an in-person interview at their own expense **

50% - The NC Programmer is responsible for writing new CNC programs, setup instructions, estimating and making changes to existing CNC programs. Will develop, write and maintain NC programs for complex aerospace components using engineering models, drawings and specifications to support a zero defects machining operations environment. Selects program routines for the most efficient machining methods for each part. Will be involved in the prove out of new technology, first article inspection, fixture design, and day to day programming using Siemens NX9-NX11 CAM.


10% - Analyzes engineering models/drawings to define the sequence of machining operations to ensure that the design intent and component quality is achieved.
5% - Make proper cutting tool selections, taking into consideration such factors as materials, speeds, type of cutters, feeds and control system imitations.
10% - Use machine simulation and optimization software to troubleshoot/validate CNC programs and ensure highly efficient and 100% defect-free FTT machining processes.
10% - Modify existing parts programs for engineering changes or program improvements.
5% - Work closely with Machinists, Quality, Engineering, Management and other team members.
5% - Develop, write and maintain type II probe and logic macros to perform on machine touch probe measuring, fixture updates, cutter offset updates, and part feature data collection.
5% - Participate in knowledge sharing and cross training activity within the NC programming group.



Skills: Required (Please screen for these three items and make sure the experience is accurately reflected on resumes):

** Siemens NX9-NX11 NC Programming experience is required **

** DMU Mori with Siemens 840D Experience ; Specifically DMU80 FD and DMU65 **

** Expertise in Lathe, Millturn, and 5 axis Mill programming of high temp alloy materials **

Preferred Requirements:
-NX Post Builder expertise
-NX Machine tool Configurator expertise
-Vericut Machine Builder expertise
-Fanuc custom macro programming expertise -Siemens 840D macro programming expertise

Education: -Bachelors degree or equivalent experience.

Skills and Experience:
Required Skills:
SIEMENS
NC PROGRAMMING
LATHE

# of Positions: 1

Location:
Canoga Park, CA

Start Date: 10/30/2017
Estimated End Date: 10/30/2018
Hours Per Week: 40.00
Hours Per Day: 8.00

Schedule Notes: Regular 40 hour week. OT possible. This assignment could go for two years for the right candidate.
 
Job Number: MB-7352024
Job Location: Canoga Park, CA
Rate: 44/hr max
Duration: 12 month contract
Input Date: 11/20/2017
Last Updated: 12/26/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Cabin Safety Engineer V&V

Description:
Velocity’s client, an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM’s, is seeking multiple Cabin Safety Engineers. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.
Seeking contract engineers to join the team in Seattle with at least five years’ experience with cabin safety engineering, to include:
• Experience and knowledge of FDMS & Water Waste Interior Systems (OEM level preferred)
• Experience with requirements writing at aircraft/systems level
• Experience validating requirements (completeness and correctness) and developing verification matrix (plan and results)
• Familiar with requirements definition, traceability, validation and verification process.
• ARP4754A knowledge and experience
• Proficient at DOORS or similar requirement management tool.
Essential functions:
• System requirements verification and validation.
• Flight test and ground test specifications.
• Support flight test and ground test activities.
• Analyze test data and evaluate system operation.
• Prepare test reports.
Desired Qualifications:
• Experience with FAA Part 25 or Part 23 certification, flight and ground test activities.
• Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
• A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
• Ability to represent the client professionally and positively during client interactions and meetings.
• Bachelor degree in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
 
Job Location: Moses Lake, WA
Start Date: ASAP
Input Date: 12/28/2017
Last Updated: 01/23/2018
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Chemical Engineer

Description:
Chemical Engineer
Location: Tulsa, OK
Duration: 12+ months
Rate: Open, DOE
Chemical Engineer Summary Statement:
Applies extensive knowledge of principles, theories and concepts related to Chemical Engineering.
Chemical Engineer Essential Functions and Key Responsibilities:
Develops solutions to a variety of problems of moderate scope and complexity.
Solves unusual problems that require moderate ingenuity and innovation related to chemical engineering, chemical formulations and manufacturing processes. Work is accomplished under general management direction. Applies extensive knowledge of chemistry and chemical engineering to design and develop transparency related aircraft products for military, executive, general aviation, or special purpose applications on operational aircraft. Researches and develops new and improved chemical manufacturing processes. Designs chemical plant equipment and devises processes for manufacturing. Determines most effective arrangement of operations such as mixing, conditioning, application, and testing of related polymer products. Develops, implements, and maintains chemical processes;calculates and organizes all data for complex process flow sheets including instrumentation and control considerations; models processes and units operations. Confers with management to ensure proper sequence of operation and prepares specifications and operating instructions for processing equipment. Services, troubleshoots, and solves engineering problems with processes or equipment already in operation. Ensures processes and procedures are in compliance with regulations.
Conducts tests and measurements throughout stages of production to determine control over such variables as temperature, density, pressure and viscosity. May function as Project Manager on large projects or significant portions of very large projects. Provides technical leadership and oversight to the assigned engineering staff. May represent the Company to current or prospective customers or vendors on technical matters related to the job assignment or technical specialty.
Chemical Engineer Ancillary Job Functions and Responsibilities:
Perform other duties as required. These duties may include assignments in job classifications other than the primary assignment.
Chemical Engineer Job Qualifications:
Formal Education, Training, Professional Certification and
Chemical Engineer Work Experience:
Experience may be substituted for the formal education and training requirements in this section at the discretion of management. Technical Bachelor level degree in Engineering or the sciences or equivalent and six(6) years related experience and /or training; or equivalent combination of education and experience.
Level of Supervision Required:
Works under general direction. Receives guidance as to results expected and to resolve complex problems. Exercises latitude in determining activities and approaches within moderate to wide parameters. Standard Job Requirements:
•Must be able to arrive at work on time, work on-site, and attend regularly.
•Must be able to read and write technically in the English language, perform appropriate mathematical calculations and learn to interpret and comprehend company policies, procedures, safety instructions, and other like documents used in an aerospace manufacturing environment.
•Competent in the use of standard software applications such as Microsoft Word and Excel and operate standard office equipment.
•Make telephone and direct personal contact with internal and external personnel and make formal presentations
Chemical Engineer
.•May perform work of lesser skilled employees.
Special Job Requirements:
Experience and working knowledge of the following:
•Polymerization and casting of liquid methyl methacrylatemonomer
•Catalysts and cross-linking agents
•Filtration of liquid monomers
•Mechanical properties testing of polymers
•Adhesion promoters and surface primers
•Polymer coating so Polysiloxane and other protective coating so Electrically-conductive coating so Optical coatings for projection screens. Special Training:
•Safety training applicable to the job and the general work area.
Physical Requirements:
While performing the duties of this job, the Stakeholder is regularly required to sit; use hands to finger, handle, or feel; and talk and hear. The Stakeholder frequently is required to move from one place to another and reach with hands and arms. The Stakeholder must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, and ability to adjust focus. Travel between facilities. Must be able to work in excess of eight (8) hours per day and five (5) days per week, if required. Must be able to ascend and descend stairs. Work Environment :Must be able to tolerate exposure to dust, fumes, noise, temperature and other elements in the shop area, if required. The noise level in the work environment is usually moderate.
Mental Requirements:
Able to work as a team member, highly organized, work well under stress and handle multiple priorities. Must possess interpersonal and communication skills to interact with other people inside and outside the company.
The Structures Company, LLC is an AA/EOE.
 
Job Location: Tulsa, OK
Rate: "open"
Per Diem: yes
Overtime: "possible"
Duration: 12+ month
Start Date: asap
Input Date: 12/04/2017
Firm Name: STRUCTURES COMPANY LLC
Attention: Mark Sharp
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Circuit Card Assembly Specialist 2017-4708

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Circuit Card Assembly Specialist
(U.S. Citizenship Required*)
Must be able to work any shift
Huntsville, AL
2017-4708


Responsibilities:
• Performs all Circuit Card production assembly operations on electronic/electrical assemblies and subassemblies as an individual or as a member of a cross-functional, high performance work team.
• Performs simple rework and modification to circuit card parts and assemblies per requirements.
• Provides maintenance on machines and tooling and machine set up tasks to prepare machines for production activity following the machine inspection checklists.
• Documents results in accordance with applicable procedures.
• Collects and inputs data for statistical process control analysis.
• Perform CCA work using detail work instructions & other released planning documentation and a variety of other supporting technical documentation as required including but not limited to: CCA technical drawings, 2D & 3D models, schematics, circuit/wiring diagrams, process and equipment specifications, photographs, illustrations, and sketches.
• Perform all elements of CCA assembly, integration from detail fabrication to buildup of circuit card assemblies.
• Perform assigned work using any electrical and CCA related electronic test instrument, test equipment, measurement tool, required to trouble shoot at the CCA component level.
• Document CCA non-conformances down to component level. Perform, as required, approved CCA rework, modification, repairs and incorporation of changes per CCA technical documentation and formal direction to electrical, electronic and mechanical systems.
• Assist in defining, implementing, completing, and monitoring the execution of the work scope.
• Make recommendations for refinement to CCA equipment and integration processes by conducting studies and evaluations that result in product and process improvements.
• Analyze CCA product, processes, test data, and rejection history to identify root cause for problems and assist with developing corrective action.

Qualification:
• Basic Manufacturing Skills
• Basic Electricity
• Circuit Card Assembly (CCA) experience
• J-standard soldering certified
• Space addendum certified

*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
Work related skills equivalent to 3 years of circuit card related technical experience or a 2-year degree in electronics, mechanical or other technical discipline (or a minimum successful completion of all electronic courses contained with a 2-year electronics technical degree curriculum).

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!



TO APPLY, PLEASE VISIT OUR WEBSITE:
 
Job Number: 2017-4708
Job Location: Huntsville, AL
Duration: 6 Months
Input Date: 12/04/2017
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: https://careers-moseleytechnical.icims.com/jobs/4708/circuit-card-assembly-specialist/job?mode=view
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Component Product Engineer (Project Engineer) / Rotating Machinery

Description:
Location: Jupiter, FL
Rate: $40.00 - $45.00/HR
Duration: 1 year contract

**Candidates must have an active Secret clearance or have had one within the last 2 years**

** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

Duties:
**Candidates must have an active Secret clearance or have had one within the last 2 years**
-Component Product Engineering (Project Engineering) in Rotating Machinery
-Candidates must have 6 to 9 years of experience
-This roll will not convert to a direct hire role unless circumstances significantly change

Skills:
Required:
**Candidates must have an active Secret clearance or have had one within the last 2 years**
-Candidates must have 6 to 9 years minimum experience working with manufacturing suppliers to fabrication aerospace quality hardware.
-Experience working with the design, analysis, and operations team.
-Ability to work effectively with the technical, business and program office team members regarding technical issues and component status.

Desired:
-Ability to provide leadership in the resolution of issues associated with the design, fabrication, schedule and procurement in order to meet program needs.

Education:
**Candidates must have an active Secret clearance or have had one within the last 2 years**
- BS Engineering or Equivalent BS degree
 
Job Number: 8145
Job Location: Jupiter, FL
Rate: $40.00 - $45.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 03/07/2018
Last Updated: 04/24/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Component Product Engineer (Project Engineer) / Rotating Machinery with active secret FL

Description:
Job Title: Component Product Engineer (Project Engineer) / Rotating Machinery

Number of Positions: 1

Remaining Positions: 1

Duties:
** Candidates must have an active Secret clearance **



** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **



** Selected candidates for Jupiter, FL roles must be onboarded through one of these approved background check providers: EIS, First Advantage, Sterling or Talentwise. See attachment for specific background check onboarding requirements **





-Component Product Engineering (Project Engineering) in Rotating Machinery



-Candidates must have 6 to 9 years of experience



-This roll will not convert to a direct hire role unless circumstances significantly change





Key Words:

Turbomachinery, rotating machinery, design, fabrication, active secret clearance

Skills:
Required:

-Candidates must have 6 to 9 years minimum experience working with manufacturing suppliers to fabrication aerospace quality hardware.

-Experience working with the design, analysis, and operations team.

-Ability to work effectively with the technical, business and program office team members regarding technical issues and component status.



Desired:

-Ability to provide leadership in the resolution of issues associated with the design, fabrication, schedule and procurement in order to meet program needs.

Education:
BS Engineering or Equivalent BS degree


Skills:
Required

PROJECT ENGINEERAEROSPACEFABRICATIONACTIVE SECRET CLEARANCE

State/Province: Florida
City/Town: Jupiter

Start Date: 01/08/2018 Hours Per Week: 40.00
Est. End Date: 12/31/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7470352
Job Location: Jupiter, FL
Rate: 45/hr max
Duration: 12 month contract
Input Date: 12/01/2017
Last Updated: 02/02/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Component Product Engineer (Project Engineer) II/III

Description:
Location: Canoga Park, CA
Rate: $35.00 - $48.00/HR
Duration: 6 month contract


** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


Duties:
**This is NOT a Designer role. Please make sure that all candidates with a Designer background or Designer expectations are aware of this. This is a Project Engineer role **
**Candidates should have 2 to 8 years of related work experience. No recent college graduates please**
**Position is for a Component Product Engineer for the development, fabrication and test of rocket engine system interconnect hardware**


Skills:
- 25%: Development and fabrication support of rocket engine components using engineering and scientific principles.
- 25%: Translates engineering and scientific concepts from preliminary ideas through product life cycle.
- 20%: Interfaces with other members of project or program teams, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
- 10%: Develops trade studies, design concepts, systems integration and component-level test plans.
- 10%: Supplier integration with external vendors
- 10%: Analyzes and verifies product design and performance for adequacy and reliability. Supports investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards or safety initiative activities.


Education:
- A Bachelor's degree in Mechanical or Aerospace Engineering.
- Candidates should have 2 to 8 years of related work experience. No recent college graduates please.
 
Job Number: 7819
Job Location: Canoga Park, CA
Rate: $35.00 - $48.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Input Date: 04/03/2018
Last Updated: 05/07/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Component Product Engineer (Project Engineer) II/III / local preferred URGENT CA

Description:
160209/7333281

8 open positions

48/hr max

Manager is currently interviewing.

Job Title: Component Product Engineer (Project Engineer) II/III



Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **



** This is NOT a Designer role. Please make sure that all candidates with a Designer background or Designer expectations are aware of this. This is a Project Engineer role **



* Candidates should have 2 to 8 years of related work experience. No recent college graduates please *



Position is for a Component Product Engineer for the development, fabrication and test of rocket engine system interconnect hardware.

Skills:
25%: Development and fabrication support of rocket engine components using engineering and scientific principles.
25%: Translates engineering and scientific concepts from preliminary ideas through product life cycle.
20%: Interfaces with other members of project or program teams, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
10%: Develops trade studies, design concepts, systems integration and component-level test plans.
10%: Supplier integration with external vendors
10%: Analyzes and verifies product design and performance for adequacy and reliability. Supports investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards or safety initiative activities.

Education:
A Bachelor's degree in Mechanical or Aerospace Engineering.

Skills:
Required

PROJECT ENGINEER COMPONENT ENGINEERING

State/Province: California
City/Town: Canoga Park

Start Date: 09/11/2017 Hours Per Week: 40.00
Est. End Date: 03/11/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7333281
Job Location: Canoga Park, CA
Rate: 48/hr max
Duration: 6 month contract
Input Date: 04/03/2018
Last Updated: 05/18/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Component Product Engineer (Project Engineer) III / Rotating Machinery

Description:
Location: Canoga Park, CA
Rate: $40.00 - $45.00/HR
Duration: 6+ month contract


** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


Duties:
** These are Project Engineering roles with a focus on Fabrication **
** These rolls will not convert to a direct hire role unless circumstances significantly change **
** Candidates must have 6 to 9 years of experience **

Keywords:
-Turbomachinery
-Rotating machinery
-Design
-Fabrication

Skills:
Required:
-Candidates must have 6 to 9 years minimum experience working with manufacturing suppliers to fabrication aerospace quality hardware.
-Experience working with the design, analysis, and operations team.
-Ability to work effectively with the technical, business and program office team members regarding technical issues and component status.

Desired:
-Ability to provide leadership in the resolution of issues associated with the design, fabrication, schedule and procurement in order to meet program needs.


Education:
BS Engineering or Equivalent BS degree
 
Job Number: 8334
Job Location: Canoga Park, CA
Rate: $40.00 - $45.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6+ mos
Input Date: 11/29/2017
Last Updated: 01/17/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Component Product Engineer (Project Engineer) III / Rotating Machinery CA

Description:
7624480/7449330

Job Title: Component Product Engineer (Project Engineer) III / Rotating Machinery

Number of Positions: 1

Remaining Positions: 1

Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **



** These are Project Engineering roles with a focus on Fabrication **



** These rolls will not convert to a direct hire role unless circumstances significantly change **



** Candidates must have 6 to 9 years of experience **





Keywords:

-Turbomachinery

-Rotating machinery

-Design

-Fabrication

Skills:
Required:

-Candidates must have 6 to 9 years minimum experience working with manufacturing suppliers to fabrication aerospace quality hardware.

-Experience working with the design, analysis, and operations team.

-Ability to work effectively with the technical, business and program office team members regarding technical issues and component status.



Desired:

-Ability to provide leadership in the resolution of issues associated with the design, fabrication, schedule and procurement in order to meet program needs.



Education:
BS Engineering or Equivalent BS degree


Skills:
Required

PROJECT ENGINEER FABRICATION AEROSPACE

State/Province: California
City/Town: Canoga Park

Start Date: 12/11/2017 Hours Per Week: 40.00
Est. End Date: 09/30/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7624480
Job Location: Canoga Park, CA
Rate: 45/hr max
Duration: 9 month contract
Input Date: 11/29/2017
Last Updated: 01/24/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Contract Project Manager - Automotive - Vision Systems - Michigan area

Description:
Keltia Design, Inc. is a technical support services company in the supplying recruiting, training, and engineering design services to customers in the Automotive, Aerospace and other Hi-Tech industries on a permanent or contractual basis. We have been in business for over 17 years.

Our client has a range of openings in the area of Automotive Vision System Software Development. Experience with cameras, radars, ultrasonics, Deep Learning etc. is desired. The Project Manager must be a versatile, detail oriented person to assist managing a group of engineers and coordinate group activities to achieve delivery goals and targets in an efficient manner.

The Project Manager will facilitate the communication between the various engineering groups and ensure the customers requirements are being addressed.

It is important to be knowledgeable of the key elements of system, hardware and software engineering, have a great sense of detail, know how to take on various duties in a short time, and be able to take initiative when needed.

Requirements
a. Bachelor’s degree preferred. Computer Science, Computer Engineering or related.
b. Proficient with MS Office tools (Excel, WORD, MS Power Point, MS Project), Experience with cameras, radars, ultrasonics, Deep Learning etc. is preferable
c. Excellent interpersonal communication skills (excellent verbal and written skills).
d. Strong programming skill in high-level language

Please send an updated resume with pay requirements and availability. This is initially a contract role but there may also be the possibility to convert to a direct employee of the Client after this initial contract is complete
 
Job Number: KeltiaJ01217
Job Location: MI
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 12/18/2017
Firm Name: KELTIA DESIGN INC
Attention: John
Address: 2615 W CASINO RD UNIT 1A
City, State: EVERETT, WA 98204
Phone: 206/368-9812
Fax Phone: 206/237-8950
Website: www.keltia-design.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Contract Software Engineer - Automotive - Vision Systems - Michigan area

Description:
Keltia Design, Inc. is a technical support services company supplying recruiting, training, and engineering design services to customers in the Automotive, Aerospace and other Hi-Tech industries on a permanent or contractual basis. We have been in business for over 17 years.

Our client has a range of openings in the area of Automotive Vision System Software Development. Experience with cameras, radars, ultrasonics, Deep Learning etc. is desired. The Software Engineer must be a versatile, detail oriented person to assist in software design and development. The Software Engineer will be heavily engaged with engineering, program management, and customers. You must know the important elements of system, hardware and software engineering, have a great sense of detail, know how to take on various duties in a short time, and be able to take initiative when needed.

Responsibilities
a. Support software development planning.
b. Develop requirements, designs and implement the overall software structure of a project.
c. Verify that software design and coding meet the software and coding requirements.
d. Verify the accuracy and robustness of requirements and capability for validation.
e. Prepare software technical documentation as well as software design review materials.
f. Present materials at design reviews and be an active participant/team player at reviews.
g. Collaborate with system, hardware and software engineering peers to develop designs on aggressive time schedules when required.
h. Specify, design and code test tools using a combination of high level languages and hardware.

Requirements
a. Bachelor’s degree required. Computer Science, Computer Engineering or related.
b. Proficient with MS Office tools (Excel, WORD, MS Power Point, MS Project), Experience with cameras, radars, ultrasonics, Deep Learning etc. is desired
c. Excellent interpersonal communication skills (excellent verbal and written skills).
d. Strong programming skill in high-level language

Please send an updated resume with pay requirements and availability. This is initially a contract role but there may also be the possibility to convert to a direct employee of the Client after this initial contract is complete
 
Job Number: Keltia01217
Job Location: MI
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 6mo+
Start Date: ASAP
Input Date: 12/18/2017
Firm Name: KELTIA DESIGN INC
Attention: John
Address: 2615 W CASINO RD UNIT 1A
City, State: EVERETT, WA 98204
Phone: 206/368-9812
Fax Phone: 206/237-8950
Website: www.keltia-design.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Contracts Specialist

Description:
Contracts Specialist

Location: Pomona, CA
Pay Rate: $30.95/hr
Duration: 6 month W2 contract
Shift: First, 8:00am – 5:00pm
**MUST be a U.S. CITIZEN**

This Company in Pomona is among the largest domestic suppliers of technologically advanced aerospace and defense sensing instrumentation. We design, develop, manufacture and support sophisticated sensors and analytical instruments for space, defense and homeland security applications. Our major products are space instruments, atmospheric monitors and chemical/biological detection systems.

JOB DESCRIPTION:
Pomona is seeking a motivated individual who is responsible for the negotiations and administration of contracts in support of the Company business.
Responsibilities include proposal support, negotiations, contract management of contract teaming agreements, etc. consisting of change management, accounts receivable, customer communications, export and import compliance, and contract closeout.

The candidate should demonstrate knowledge of negotiating and administering various contracts.
Must be familiar with and demonstrate an ability to review and provide comments of RFPs, RFIs, proposals and change proposals to minimize contractual risk.
Must ensure compliance with all regulatory requirements, with extensive experience in change management on various types of contracts.
Candidate must be able to work with Supply Chain to ensure contract requirements are successfully met.
Support the review of corporate documents, submissions, etc. for purposes of ensuring compliance with a variety of specific government regulations.

Education:
BS/BA in Management or related field

EXPERIENCE/QUALIFICATIONS:
7+ years experience in government and commercial contracting 5 years in government contract administration
Excellent communication skills, both written and oral
Ability to work independently
Strong negotiation skills are required as well as working knowledge of FAR/DFAR regulations.
Experience with SAP preferred.
Assist in leading group process improvements using our Company continuous improvement system (ACE), including the continued development of standard work for program management group processes.
Actively support the organization’s efforts to meet or exceed EH&S goals and plans, must comply with the EH&S Policy and applicable regulatory and company EH&S rules and requirements.
 
Job Number: 8349
Job Location: Pomona, CA
Rate: 30.95
Per Diem: No
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 12/04/2017
Last Updated: 02/19/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Checker

Description:
All candidates must have a Bachelor’s degree to apply.

RESPONSIBILITIES
• Reviews Engineering design documents consisting of drawing, engineering order and parts list for consistency with company standards, design quality, requirements and its corrective interpretation.
• Also reviews 3D models used to produce 2D design are properly associated and provide repeatability and correct representation in the Digital Aircraft Model.
• Constant Interaction with Design teams to review/discuss issues and agree on acceptable solutions

TASKS
• Check Drawing, Engineering order and parts list for adherence to company standards.
• Check 3D information in CATIA and PLM System clearly describe and annotate issues found to designer and engineering design field
• Work with design team to solve issues identified
• Consult with design team and other checkers for interpretation provide inputs to management on major issues being identified and help develop alternatives for solutions

REQUIREMENTS
• 10 plus years of experience designing mechanical and/ or structural parts, assemblies or installations for aircraft
• 7 years of experience with CATIA and PLM Systems (preferably Teamcenter)
• 5 years of experience working with GD&T
• Very familiar with aircraft production and assembly methods
• BS Mechanical or Aerospace Engineering
• Experience with Composite materials a Plus
 
Job Number: 28-016
Job Location: Greensbo, NC
Rate: $48-$60 DOE
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 09/20/2017
Last Updated: 12/18/2017
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer

Description:
Design Engineer to support our engineering team delivering highly complex electro-mechanical, mechanical, and pneumatic components and systems for flight actuation applications to our Defense Sector customers.

Essential job functions:
• Perform conceptual design, analysis, assembly/detail drawing creation in NX, and test planning for complex control hardware used on military aircraft
• Validate conceptual problem solutions through trade studies and by applying sound engineering principles
• Perform engineering calculations related to sizing, performance, tolerance and assembly
• Participate in the evolution of conceptual design, technical project planning, detail design, and development testing throughout the program lifecycle
• Create reliable designs through a comprehensive experimental development test program
• Document designs, analyses, and test results with accurate and concise reports
• Team-oriented, with the desire to participate in and contribute to a high functioning team
• Self-starter with strong analytical skills and a desire for constant improvement

Required skills:
• 6+ years of design and development engineering experience
• Proficient in current versions of NX/UG computer-aided design software, 2 years experience minimum
• Good sense of three-dimensional spatial orientation and knowledge of mechanical hardware design
• Proficient in assembly/detail drawings, GD&T, and dimensional tolerance analysis

Education:
• Bachelor’s degree in Mechanical or Aerospace Engineering or related technical field
 
Job Number: 52852
Job Location: Salt Lake City, UT
Rate: Open
Per Diem: Yes
Duration: 6 months plus
Start Date: ASAP
Input Date: 12/06/2017
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Rich Nguyen
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer

Description:
Design Engineer

Independence, OH
1 Year Contract
$50.00-60.00/Hr

Summary: Reporting to the Design Lead, the successful candidate will be responsible for supporting detail design and drawing release in support of initial production. Model Based Definition (MBD) drawings shall be compatible with UTAS Landing Systems design methodologies, customer and industry/regulatory requirements and standard practices. The successful candidate will conduct trade studies, generate layouts, perform tolerance stack-ups, and detailed part design and formal drawing release.

Required Qualifications:
• BS in Mechanical or Aerospace Engineering with 8+ years of design experience with a background in mechanisms and hydraulics in aerospace field with work experience with electrical and hydraulic systems routings
• Minimum of 8 years of experience within the Aerospace industry; must include extensive experience in New Product Development of transport and / or military type aircraft components and assemblies . Knowledge of industry standard practices for systems routings. Understanding of requirements management and verification. Understanding of decomposition of system requirements and development of sub-system requirements. Understanding of qualification requirements electrical and hydraulic equipment. CATIA V5 - model based definition (FTA), kinematics, functional tolerance and annotation and drafting / interoperability. Working knowledge of Engineering PDM systems. In-depth knowledge of MS programs (Word, Excel, Project, PPT). Strong communication skills capable of engaging and working directly with suppliers. US citizen, permanent resident alien or able to review all export-controlled technical information. Experience with GD&T (ASME Y14.5) and familiar with ASME Y14.100 and Y14.41 Experience with Matrix One and SmarTeam PDM systems Working knowledge of materials and surface treatments Proficient with MS Word, Excel, and PPT
• Demonstrated ability to utilize Catia V5 with strong emphasis on functional tolerance and annotation module
• Strong interpersonal skills with demonstrated ability to maintain good working relationships with internal and external customers
• Successful candidates must meet all requirements under ITAR & CCGP
• Possess UTAS-LS Enterprise Values including Ethical Behavior, Customer Focused Improvement, Accountability & Teamwork and Openness & Trust
 
Job Number: 8266
Job Location: Indendence, OH
Rate: 50.00-60.00/Hr
Per Diem: No
Overtime: Possible
Duration: 1 Year
Start Date: ASAP
Input Date: 11/15/2017
Last Updated: 02/05/2018
Firm Name: INCONEN CORPORATION
Attention: Brad
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer - Level 3 CREO CA

Description:
Job Title: Design Engineer - Level 3

Number of Positions: 5

Remaining Positions: 5

Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **



** Candidates must have significant experience with Creo and GD&T (Geometric Dimensioning & Tolerancing). Windchill experience strongly preferred **



** 6 years minimum of related experience as technical Design Engineer in rocket propulsion hardware or equivalent, and 6 years minimum of related experience as technical Designer using ProE/Creo CAD systems **



** Knowledge in the design of high pressure cryogenic, ambient and high temperature rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware is preferred **





Design Engineer - Must be able to create or modify designs of liquid rocket propulsion hardware associated to high pressure and high temperature static structures, combustion systems and high pressure valve systems.



Responsible for designing, developing and testing products including providing project time and cost estimate, product manufacturing and evaluation product for quality safety and cost.
Applies research to the planning design, development and testing of rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware.
Applies theories of heat and energy transfer to create practical solutions to technical problems
Responsible for damage tolerance, durability, design modeling, coordination with analysis disciplines.
Majority of work will be to develop and maintain component and assembly layouts, designs/CAD models, and drawings using Creo2 graphics system for liquid engine hardware.
Activities: conceptual design creation, design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, synthesis of higher level requirements to component level requirements. Conduct trade studies and develop schedules, test plans, component specifications and procedures.



Skills:
Candidates must have significant experience with Creo & GD&T. Higher level certifications are preferred.

Winchill experience strongly preferred.

Mechanical Design and development Engineers research, develop, analyze, design, and support fabrication of components using engineering and scientific principles.

Engineers are also required to analyze and verify product design and performance for adequacy and reliability.

Support or lead investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards and/or safety initiative activities.

Must be able to interface well with other members of project or program team, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.

Must be able to prepare and make presentations at both internal and customer design reviews.

Education:
BS degree in an Engineering field or equivalent. MS degree is desired.

Skills:
Required

AEROSPACE DESIGN CREO GEOMETRIC DIMENSIONING GEOMETRIC TOLERANCING WINDCHILL

State/Province: California
City/Town: Canoga Park

Start Date: 11/06/2017 Hours Per Week: 40.00
Est. End Date: 06/30/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7455592
Job Location: Canoga Park, CA
Rate: 45/hr max
Duration: 7 month contract
Input Date: 01/09/2018
Last Updated: 01/16/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer - Level 4 CREO / BS required URGENT CA

Description:
7455575
Job Title: Design Engineer - Level 4
60-65/hr max

Number of Positions: 15

Remaining Positions: 5

Please note that a BS degree is required.

Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **



** Candidates must have significant experience with Creo and GD&T (Geometric Dimensioning & Tolerencing). Windchill experience strongly preferred.



** 10 years minimum of related experience as technical Design Engineer in rocket propulsion hardware or equivalent, and 10 years minimum of related experience as technical Designer using ProE/Creo CAD systems **



** Knowledge in the design of high pressure cryogenic, ambient and high temperature rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware is preferred **


Creo
GD&T
5+ years “Design” experience, however drafting skills a plus
BS in Engineering or related field
Prefer: Windchill, and Rocket Design experience.



Design Engineer - Must be able to create or modify designs of liquid rocket propulsion hardware associated to high pressure and high temperature static structures, combustion systems and high pressure valve systems.

Responsible for designing, developing and testing products including providing project time and cost estimate, product manufacturing and evaluation product for quality safety and cost.
Applies research to the planning design, development and testing of rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware.
Applies theories of heat and energy transfer to create practical solutions to technical problems
Responsible for damage tolerance, durability, design modeling, coordination with analysis disciplines.
Majority of work will be to develop and maintain component and assembly layouts, designs/CAD models, and drawings using Creo2 graphics system for liquid engine hardware.
Activities: conceptual design creation, design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, synthesis of higher level requirements to component level requirements. Conduct trade studies and develop schedules, test plans, component specifications and procedures.



Skills:
Candidates must have significant experience with Creo & GD&T. Higher level certifications are preferred.
Winchill experience strongly preferred.
Mechanical Design and development Engineers research, develop, analyze, design, and support fabrication of components using engineering and scientific principles.
Engineers are also required to analyze and verify product design and performance for adequacy and reliability.
Support or lead investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards and/or safety initiative activities.
Must be able to interface well with other members of project or program team, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
Must be able to prepare and make presentations at both internal and customer design reviews.

Education:
BS degree in an Engineering field or equivalent. MS degree is desired.


Skills:
Required

AEROSPACE DESIGN CREO GEOMETRIC DIMENSIONING GEOMETRIC TOLERANCING WINDCHILL


State/Province: California
City/Town: Canoga Park


Start Date: 11/06/2017 Hours Per Week: 40.00
Est. End Date: 09/30/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7455575
Job Location: Canoga Park, CA
Rate: 60-65/hr max
Duration: 10 month contract
Input Date: 01/17/2018
Last Updated: 01/29/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer II

Description:
Position Summary: This position will work with the engineering team and will ensure the successful integration of each design element with the product as a whole. This individual will work both independently as well as part of the larger engineering team. Tasks will include the development of aircraft structural layouts and the design of individual components, assemblies, and installations. Engineering materials will include metals, nonmetals, and composite structural materials. Tasking may also include design and integration of aircraft mechanical systems, hydraulic systems, electrical systems, environmental control systems and a variety of other equipment and systems as needed. Specific duties and responsibilities include but are not limited to the following:

Essential Duties and Responsibilities:

The Design Engineer II will work with minimal intervention and must rely on experience and judgment to plan and accomplish goals while performing a variety of complex tasks in the following areas:

Applies standard engineering practices and techniques, including innovative methodology, to provide effective solutions to problems involving a wide number of variables.

Able to ensure the selection and application of materials and processes are appropriate to each design element with the ability to generate and/or revise specifications when necessary.

Compose compliance matrix to meet customer specification requirements.

In-depth knowledge of standard concepts, practices, and procedures within a specified engineering field.

Proficiency utilizing CATIA V5 engineering design software.

Works on problems of complex scope where analysis of situation or data requires a review of identifiable factors to determine appropriate action.

Ability to guide, mentor and advise other design engineering staff.

Creativity and latitude is expected.

Participate in a variety of process improvement projects.

Able to support design reviews with timely and relevant information and understanding.

Performs other duties as required.

Qualifications & Skills Requirements:

Requires a BSME, BSCE, BSAE, or a Bachelor’s degree in a related engineering field and a minimum of 5-9 years of experience in the Aerospace Industry or in a related field.
Requires proficiency using CATIA V5 and must be highly competent using MS Office products.

Physical Requirements: Individual must be able to sit for extended periods of time, working at a desk and/or attending meetings. May occasionally require employee to stand and/or walk and occasionally lift and/or move up to 10 pounds. Will need to be able to move throughout the office and talk/hear or otherwise communicate with other employees and management. Work will be performed in an office environment. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential duties of the job.

LMI is an equal employment opportunity employer. Consistent with applicable law, LMI provides access and opportunities to those with disabilities. This includes providing reasonable accommodation to individuals with disabilities and disabled veterans who seek to access the company’s online application system. If an applicant is unable to fully access the online application system, LMI will provide a reasonable accommodation. Applicants with disabilities may contact us at 636-916-2400 for assistance accessing the on-line application system. Callers should have a detailed description of the requested accommodation, their name and preferred method of contact ready for LMI‘s Human Resources Department. LMI will make every effort to respond within two (2) business days. This phone number is not for the general submission of application materials.

LMI is an E-Verify Employer.

LMI is an Equal Employment Opportunity/Affirmative Action/Disability/Veterans Employer


Click the link and follow instructions on HOW TO APPLY: LMI ENGINEERING JOB OPPORTUNITIES
 

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer NX UT

Description:
Request number: 5051
Job title: Design Engineer

Number of openings: 1
Position location: Salt Lake - UT
Employment type: Contract
OT exempt: No
Shift: 1st
Education Requirement: BS/BA
Driving on company time?: No
Minimum Years of Experience: 6 years Maximum
Hourly Pay Rate: 60
Start Date: 12/04/2017
Tentative End Date: 06/04/2018

Job Description
Function: **This position is a 6-12 month contract with potential of transitioning to full time direct employment.**


Moog Space and Defense Group in Salt Lake City is looking for a Design Engineer to support our engineering team delivering highly complex electro-mechanical, mechanical, and pneumatic components and systems for flight actuation applications to our Defense Sector customers. A Design Engineer at Moog will contribute to design support of some of the most sought after missile systems in the defense industry.

Essential job functions:
• Perform conceptual design, analysis, assembly/detail drawing creation in NX, and test planning for complex control hardware used on military aircraft
• Validate conceptual problem solutions through trade studies and by applying sound engineering principles
• Perform engineering calculations related to sizing, performance, tolerance and assembly
• Participate in the evolution of conceptual design, technical project planning, detail design, and development testing throughout the program lifecycle
• Represent Moog in a manner consistent with its leading-edge technical reputation
• Create reliable designs through a comprehensive experimental development test program
• Document designs, analyses, and test results with accurate and concise reports
• Team-oriented, with the desire to participate in and contribute to a high functioning team
• Self-starter with strong analytical skills and a desire for constant improvement
Required skills:
• 6+ years of design and development engineering experience
• Proficient in current versions of NX/UG computer-aided design software, 2 years experience minimum
• Good sense of three-dimensional spatial orientation and knowledge of mechanical hardware design
• Proficient in assembly/detail drawings, GD&T, and dimensional tolerance analysis


Education:
• Bachelor’s degree in Mechanical or Aerospace Engineering or related technical field
 
Job Number: JE-5051
Job Location: Salt Lake City, UT
Rate: 60/hr max
Duration: 6-12 month contract with potential of transitioning to full time direct employment
Input Date: 12/13/2017
Last Updated: 01/02/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical (EWIS) Engineer

Description:
Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Duration: Long Term Contract
Shift: 1st Shift


Unique Skills:
Develop electrical wiring interconnect system (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wire harness assemblies, utilizing CATIA V5 Electrical and Sheet Metal Work Benches. Capable of interfacing with wiring diagrams, systems, and EMI/EMC requirements. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements.
• Aerospace Experience is required
• Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required
• Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative
• Knowledge of Catia V5 Electrical is required

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

Principle Duties and Responsibilities:
Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7977
Job Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 03/21/2018
Last Updated: 06/11/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical (EWIS) Engineer-TS II

Description:
Electrical (EWIS) Engineer-TS II
Savannah, GA
Rate: $70-$77

Unique Skills:

Develop electrical wiring interconnect systems (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wiring diagrams, cable/wire harness assemblies, and rack/panel designs from electrical system schematics adhering to EWIS requirements. Select qualified electrical components such as connectors, backshells, and other parts. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements. • Aerospace Experience is required • Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required • Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative • Knowledge of Mentor Graphics Capital Harness Systems (CHS) is strongly desired


Education and Experience Requirements:

Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.


Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

Principle Duties and Responsibilities:

Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7976
Job Location: Savannah, GA
Rate: $70-$77
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 09/27/2017
Last Updated: 02/05/2018
Firm Name: INCONEN CORPORATION
Attention: Cathy O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Applications Engineering

Description:
UNIQUE SKILLS
Experience with Autocad required. Aerospace experience required. Experience or knowledge of electrical connectors, backshells, shielding, wiring and electrical connectivity is required. Be Familiar with CFR 14 Part 25 and AS50881. Candidate must be able to create wiring diagrams and schematics to include the selection of qualified electrical components such as connectors, backshells and other electrical parts. Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required. Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project.

JOB DESCRIPTION
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs. in the specific technical discipline or 10 yrs. broad engineering experience in several technical disciplines with Bachelors, or 3 yrs. in the specific technical discipline with Masters, or 1 yr. in the specific technical discipline with PhD. Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

PRINCIPAL DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

ADDITIONAL FUNCTIONS
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

OTHER REQUIREMENTS
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 17-736-93664
Job Location: Southeast
Rate: $58.00 to $63.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 03/21/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical EWIS Eng w/Catia V5 - TS II

Description:
UNIQUE SKILLS
Develop electrical wiring interconnect system (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wire harness assemblies, utilizing CATIA V5 Electrical and Sheet Metal Work Benches. Capable of interfacing with wiring diagrams, systems, and EMI/EMC requirements. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements. • Aerospace Experience is required • Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required • Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative • Knowledge of Catia V5 Electrical is required

EDUCATION AND EXPERIENCE REQUIREMENTS
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

POSITION PURPOSE
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of client products and services

PRINCIPLE DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

ADDITIONAL FUNCTIONS
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

OTHER REQUIREMENTS
1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 17-795-116742
Job Location: Southeast
Rate: $58.00 to $63.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 01/29/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical EWIS Engineer/ Electrical Apps

Description:
Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services

Unique Skills:
• Develop electrical wiring interconnect systems (EWIS), capable of resolving all technical issues relating to EWIS.
• Produce and maintain wiring diagrams, cable/wire harness assemblies, and rack/panel designs from electrical system schematics adhering to EWIS requirements.
• Select qualified electrical components such as connectors, backshells, and other parts.
• Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements
• Aerospace Experience is required
• Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required
• Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative
• Knowledge of Mentor Graphics Capital Harness Systems (CHS) is strongly desired

Education and Experience Requirements:
• Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required.
• 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.



Essential Functions:
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Is consulted extensively by associates and others as a recognized authority within the field
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
• Approach to problem solving balances technical product, cost and schedule
• Works without appreciable direction; work is reviewed from a long-range perspective for desired results
• Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
 
Job Number: 24-204
Job Location: Savannah, GA
Rate: $58 - $63
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 02/22/2018
Last Updated: 03/19/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical EWIS Eng wCatia V5 - TS II

Description:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

Unique Skills:
• EWIS knowledge. Wire Harness Routing. Wire Harness Installation. CATIA V5 Electrical Workbench.

Education and Experience Requirements:
• Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.


Principal Duties and Responsibilities:
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Is consulted extensively by associates and others as a recognized authority within the field
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
• Approach to problem solving balances technical product, cost and schedule
• Works without appreciable direction; work is reviewed from a long-range perspective for desired results
• Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
 
Job Number: 24-256
Job Location: Savannah, GA
Rate: $60 - $67
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 05/17/2018
Last Updated: 06/22/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer II ( Chandler, AZ ) 7802712

Description:
Electrical Engineer II ( Chandler, AZ ) 7802712
11 month Contract

Pay Rate: $50/hr w2

Work with a team of engineers to develop electromagnetic models to capture electromagnetic environment effects (E3)including the prediction of pin level transients. Work within a cross functional team to leverage inputs from CAD, subsystems and systems engineering to develop a baseline electromagnetic model and increment as the system design evolves to capture E3 effects. Updates to the model may include general design changes or the evaluation of potential mitigation approaches. Responsible for model validation through the selection of hardware sets which may be components, subsystems or a combination of them. Includes the development of test plans for the evaluation of those hardware sets with demonstration of model validation though appropriate comparisons between the model and measurements. Travel of up to 25% of the time may be required.

Job Snapshot: Must haves:
Experience with electromagnetic environment effects (E3). On the resume that may show up as intra-system electromagnetic compatibility (EMC), Subsystem and equipment electromagnetic interference (EMI), Lightning,…
Aerospace experience (rocket (launch) or satellite systems)
Active Secret Clearance (or cleared within the past year)
 
Job Number: 7802712
Job Location: Chandler, AZ
Rate: 50
Per Diem: Yes
Overtime: yes
Duration: 11 month
Start Date: ASAP
Input Date: 01/19/2018
Firm Name: TALENTPRO CONSULTING
Attention: tim
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X101
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Harness Installation Engineer-Special Missions

Description:
UNIQUE SKILLS
Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project. Aerospace experience is required. Knowledge of Catia V5 is required. Candidate must be able to design wire harness assemblies and installations utilizing the Catia V5 Electrical and Sheet Metal Work Benches. Must have intimate knowledge of an ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements, while meeting all installation and maintainability requirements. Candidate must possess knowledge of regulatory guidance material relative to aircraft harness design. Excellent verbal and written communication skills, and computer skills (Catia V5, Catia V4, PC/MS Office) are required.

JOB DESCRIPTION
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs. in the specific technical discipline or 10 yrs. broad engineering experience in several technical disciplines with Bachelors, or 3 yrs. in the specific technical discipline with Masters, or 1 yr. in the specific technical discipline with PhD. Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Client products and services

PRINCIPAL DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

ADDITIONAL FUNCTIONS
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned
 
Job Number: 17-783-115282
Job Location: Southeast
Rate: $58.00 to $63.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 07/11/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Harness Installation Engineer - Special Missions

Description:
Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Duration: Long Term Contract (1-4 years)
Shift:1st Shift


Unique Skills:
Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project. Aerospace experience is required. Knowledge of Catia V5 is required. Candidate must be able to design wire harness assemblies and installations utilizing the Catia V5 Electrical and Sheet Metal Work Benches. Must have intimate knowledge of an ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements, while meeting all installation and maintainability requirements. Candidate must possess knowledge of regulatory guidance material relative to aircraft harness design. Excellent verbal and written communication skills, and computer skills (Catia V5, Catia V4, PC/MS Office) are required.

Job description:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

Principal Duties and Responsibilities:
Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned
 
Job Number: 7876
Job Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 03/09/2018
Last Updated: 03/12/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical/Project Engineer

Description:
Electrical/Project Engineer

Location: Windsor Locks, CT
Pay Rate: $58/hr
Duration: 1 year W2 contract
Shift: First, 8:00am to 5:00pm
**MUST be a U.S. CITIZEN**

Description/Comment:
Manages a team and provides direction on research, development, design, and testing of electrical components, PC Board Layout, Electronics Packaging equipment, facilities, systems, products and networks for commercial, industrial and governmental purposes.

Additional Job Details:
The Human Exploration & Launch business within ISR & Space Systems provides Environmental Control and Life Support Systems in deep space, low earth orbit, undersea, and on the ground. Our hardware is paramount to survival in harsh environments, and our passion for our work demands excellence in everything we do, from the talent we recruit to the highly-engineered systems we deliver. We value people, integrity, ideas and performance. This posting is for a project engineering position at this Company – ISR & Space Systems in Windsor Locks, CT supporting various platforms.
The candidate will work within an Integrated Product Development Team to support the design and development of various electronic controls; will work with the Project Engineer to execute project to meet schedule and budget milestones; and will collaborate with a wide variety of functional areas inside and outside the organization to ensure successful completion of program requirements.

Education
Candidate will have BS in Electrical Engineering with 4 years of working experience in the aerospace industry.

Responsibilities
• Coordinate Integrated Product Development Team activities (design, procurement, fabrication and test)
• Assist Control Account Managers with Earned Value Management (EVMS) by monitoring program cost and schedule performance
• Assist Control Account Manager with Estimate to Complete
• Coordinate activities associated with review and approval of engineering specifications and engineering drawings
• Initiate and process Engineering Changes working with all engineering disciplines to implement approved changes. This will include marking drawings, copying prints, creating PDF’s to support Company electronic Engineering Change process.
• Coordinate, track and support the assembly and test of development hardware
• Support supplier selection and part procurement
• Provide status reports
• Support program reviews both internal and external
• Coordinate closure of action items
• Support operations to fabricate, assemble, test and qualify flight hardware
• Ensure standard work flow maps are complete
• Document activities and programs worked with time spend on various activities. This information will be submitted weekly and summed monthly by person with the monthly invoice.

Skills/Experience
• Ability to perform as part of a cross-functional team and coordinate the activities of various engineering disciplines including electrical and mechanical design, systems, components, materials development, process development, and supplier development
• Strong project management, organizational and prioritization skills
• Ability to work independently or as part of an integrated product team
• Able to understand electrical circuitry and able to recommend trouble shooting test steps to the stakeholders
• Ability to read and understand technical manuals, blueprints or drawings
• Prepare test plans, analyze test data, and prepare reports to support project activity, and maintain up-to-date records of project test results
• Understanding Earned Value Management Basics
• Strong troubleshooting and problem solving skills
• Must understand fundamentals of Root Cause Analysis
• Interface with shop floor personnel for the purpose of communicating technical, quality, and inspection information
• Strong written and verbal skills including thorough knowledge of Microsoft Office products
 
Job Number: 8278
Job Location: Windsor Locks, CT
Rate: 58
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/16/2017
Last Updated: 12/18/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer

Description:
Major purpose:
We are currently seeking a Senior Software Engineer with experience writing embedded software. This individual will have the opportunity to work on Infrared Product lines, responsible for a variety of software tasks throughout the full lifecycle. Responsibilities include designing, coding, documenting, and testing C and C++ applications/systems. General knowledge of hardware and communication protocols is a huge plus.
Major functions:

Technical/Functional skills:
Education/Experience/Licenses etc.: Required Competencies/Skills:
• Experience using C/C++ to develop embedded software
• Experience with Real-Time Operating Systems (FreeRTOS a plus)
• Excellent verbal and written communication skills
• Demonstrated ability to work as part of a team
• 6+ years of experience
• Minimum of BS in Computer Engineering, Electrical Engineering, Computer Science or similar

Preferred Competencies/Skills:
• Experience with Communication Protocols (Ethernet, RS422, CoaXpress, Camera Link, GigE Vision, etc.)
• Experience working with other programming languages such as C#, MATLAB, Python, etc.
• Experience in the Defense, Space, Aerospace, or similar industries
• Experience using Quartus and Altera/Client tools
• Experience using electronic test equipment such as oscilloscopes, DMMs, and basic lab equipment
• Experience with Linux and Windows Development Environments
• Basic knowledge of circuits, schematics, and hardware design
 
Job Number: 17-53009
Job Location: Mason, OH
Rate: 65.00 - 85.00
Per Diem: No
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 12/07/2017
Firm Name: NESCO RESOURCE
Attention: Sebastian Hernandez
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

Engineer Structural- 5- Secret Clearance

Description:
PDS Tech is seeking a candidate for the Engineer Structural 5 position located in Melbourne, FL.  

Perform static, dynamic, and DaDT structural analyses of metallic airframe structure, mechanical systems, and equipment, by hand and by using the automated methods and procedures approved for the program.
Ensure that 
designs meet program requirements and are the lightest, lowest cost, and highest quality products consistent with schedule and budget objectives.
The analyst may also be expected to derive non-flight applied loads, create, extract and 
distribute internal loads, and perform weight and stiffness optimization. T
ools utilized may include FEMAP, NX,Teamcenter 
and other software applications.

Basic Qualifications:



Bachelor of Science degree (ME/AE/CE) with 14 years of experience in AEROSPACE Structural Analysis.




Preferred Qualifications:



Knowledge of FEMAP and NX CAE. Candidate must be able to collaborate in a team environment, prioritize and adjust tasks to accomplish the project result, prioritize multiple responsibilities and/or accomplishing them simultaneously, and comprehend and analyze complex problems and develop solutions. Candidate must be able to collaborate in a team environment, prioritize and adjust tasks to accomplish the project result, prioritize multiple responsibilities and/or accomplishing them simultaneously, and comprehend and analyze complex problems and develop solutions.

 


 
Job Number: 1710075260
Job Location: Melbourne, FL
Duration: 5 months
Input Date: 10/11/2017
Last Updated: 10/17/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Elisa Petersen
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000023L3MAAU&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Designer

Description:
Equipment & Tool Designer

Location: Everett, WA
Duration: 9 months

Description:
Leads the development of highly complex equipment and tooling concepts and specifications to satisfy aerospace product design and build requirements. Leads design reviews, design requirement collection, drawing creation and revision. Researches the application of robotics, automation and new technology to support the build plan. Creates off-load packages, specifications, purchase requests and usage instructions for equipment and tooling. Checks designs for compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements. Establishes and validates spares requirements. Leads the implementation of best practices into functional process documentation to drive standard work. Oversees the development and documentation of equipment and tooling inspection and usage instructions, preventative maintenance plans, and user training. Provides technical direction to support engineering changes and discrepancy resolution. Oversees the maintenance of hardware and software configuration. Assesses and makes recommendations for disposition of equipment and tooling.

Education
AA degree in related discipline and typically 6 or more years of related experience or an equivalent combination of education and experience.

Skill Code:
66W-Tech Designer

If interested then please share updated resume at ravi@iconma.com
 
Job Number: 17-19963
Job Location: Everett,, WA
Input Date: 11/27/2017
Last Updated: 12/26/2017
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 1201 PACIFIC AVE STE 600
City, State: TACOMA, WA 98402
Phone: 253/213-2012
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Designer 3

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Equipment & Tool Designer 3
(U.S. Citizenship Required*)
Everett, WA
2017-4999

Responsibilities:
• Evaluates program and project requirements, develops complex equipment and tooling concepts and designs solutions for the Production System.
• Compiles and analyzes technical data to determine the effects on product engineering design and rate estimates, identifies robotics, automation or technology recommendations and system integration for equipment and tooling.
• Ensures compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements.
• Validates contractual performance milestones, maintains configuration control, conducts reviews, prepares plans for productions readiness, preventative maintenance, and spares.
• Conducts training for Production and Maintenance personnel.
• Develops and implements work-arounds and maintains configuration of hardware, software and documentation.
• Performs studies and make recommendation for disposition of assets.

Qualification:
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor's and 5 or more years' experience, Master's degree with 3 or more years' experience or PhD degree with experience.
• Degree must be from an accredited course of study in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!

PLEASE APPLY ONLINE HERE: https://careers-moseleytechnical.icims.com/jobs/4999/equipment-%26-tool-engineer-3/job?mode=view
 
Job Number: 2017-4999
Job Location: Everett, WA
Duration: 10 Months
Input Date: 12/05/2017
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Aaron Burrows
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Designer 3

Description:
Equipment & Tool Designer 3

Location: Everett, WA
Duration: 9 months

Job Description:
Investigates and develops complex equipment and tooling concepts and specifications to satisfy aerospace product design and build requirements. Participates in design reviews, collects design requirements, creates and revises drawings and models, researches the application of robotics, automation and new technology to support the build plan. Creates off-load packages, specifications, purchase requests and usage instructions for equipment and tooling. Checks designs for compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements. Develops and documents equipment and tooling inspection and usage instructions, preventative maintenance plans, and user training. Provides technical support for engineering changes and discrepancies by investigating problems and analyzing data to identify solutions. Maintains hardware and software configuration. Assesses and makes recommendations for disposition of equipment and tooling.

Education:
AA degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience.

Skill Code: 66W-Tech Designer

If interested then please share updated resume at ravi@iconma.com
 
Job Number: 17-19956
Job Location: Everett,, WA
Input Date: 11/27/2017
Last Updated: 01/02/2018
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 1201 PACIFIC AVE STE 600
City, State: TACOMA, WA 98402
Phone: 253/213-2012
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Designer 3

Description:
Job Description
• Investigates and develops complex equipment and tooling concepts and specifications to satisfy aerospace product design and build requirements.
• Participates in design reviews, collects design requirements, creates and revises drawings and models, researches the application of robotics, automation and new technology to support the build plan.
• Creates off-load packages, specifications, purchase requests and usage instructions for equipment and tooling.
• Checks designs for compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements.
• Develops and documents equipment and tooling inspection and usage instructions, preventative maintenance plans, and user training.
• Provides technical support for engineering changes and discrepancies by investigating problems and analyzing data to identify solutions.
• Maintains hardware and software configuration.
• Assesses and makes recommendations for disposition of equipment and tooling.

Education/Experience
AA degree in related discipline and typically 3 or more years of related experience
 
Job Number: Ph# 636-438-0314;39855
Job Location: Everett, WA
Rate: Hourly
Per Diem: Split
Overtime: Possible
Duration: 9 mos
Start Date: 1/8/2018
Input Date: 11/21/2017
Last Updated: 12/06/2017
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Michelle Fox
Address: WESTRIDGE OFFICE PARK
2646 HIGHWAY 109 STE 207

City, State: WILDWOOD, MO 63040
Phone: 636/438-0312
800 Phone: 866/277-3343
Fax Phone: 636/220-8284
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Designer 4

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Equipment & Tool Designer 4
(U.S. Citizenship Required*)
Everett, WA
2017-5001

Responsibilities:
• Leads the development of highly complex equipment and tooling concepts and specifications to satisfy aerospace product design and build requirements.
• Leads design reviews, design requirement collection, drawing creation and revision.
• Researches the application of robotics, automation and new technology to support the build plan.
• Creates off-load packages, specifications, purchase requests and usage instructions for equipment and tooling.
• Checks designs for compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements.
• Establishes and validates spares requirements.
• Leads the implementation of best practices into functional process documentation to drive standard work.
• Oversees the development and documentation of equipment and tooling inspection and usage instructions, preventative maintenance plans, and user training.
• Provides technical direction to support engineering changes and discrepancy resolution.
• Oversees the maintenance of hardware and software configuration.
• Assesses and makes recommendations for disposition of equipment and tooling.

Qualification:
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
AA degree in related discipline and typically 6 or more years of related experience or an equivalent combination of education and experience.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!



TO APPLY, PLEASE VISIT OUR WEBSITE: https://careers-moseleytechnical.icims.com/jobs/5001/equipment-%26-tool-designer-4/job?mode=view
 
Job Number: 2017-5001
Job Location: Everett, WA
Duration: 9 Months
Input Date: 12/05/2017
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Aaron Burrows
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Designer 3

Description:
Leads the development of highly complex equipment and tooling concepts and specifications to satisfy aerospace product design and build requirements. Leads design reviews, design requirement collection, drawing creation and revision. Researches the application of robotics, automation and new technology to support the build plan. Creates off-load packages, specifications, purchase requests and usage instructions for equipment and tooling. Checks designs for compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements. Establishes and validates spares requirements. Leads the implementation of best practices into functional process documentation to drive standard work. Oversees the development and documentation of equipment and tooling inspection and usage instructions, preventative maintenance plans, and user training. Provides technical direction to support engineering changes and discrepancy resolution. Oversees the maintenance of hardware and software configuration. Assesses and makes recommendations for disposition of equipment and tooling.

AA degree in related discipline and typically 6 or more years of related experience or an equivalent combination of education and experience.
 
Job Number: 17-27027
Job Location: Everett, WA
Per Diem: Split
Overtime: possible
Duration: 9 months
Start Date: 1/8/18
Input Date: 12/18/2017
Firm Name: ICONMA LLC
Attention: Constance Whitcomb
Address: 4620 E 53RD ST
City, State: DAVENPORT, IA 52807
Phone: 312/502-4795
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Designer 4

Description:
Job Description
• Leads the development of highly complex equipment and tooling concepts and specifications to satisfy aerospace product design and build requirements.
• Leads design reviews, design requirement collection, drawing creation and revision.
• Researches the application of robotics, automation and new technology to support the build plan.
• Creates off-load packages, specifications, purchase requests and usage instructions for equipment and tooling.
• Checks designs for compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements.
• Establishes and validates spares requirements.
• Leads the implementation of best practices into functional process documentation to drive standard work.
• Oversees the development and documentation of equipment and tooling inspection and usage instructions, preventative maintenance plans, and user training.
• Provides technical direction to support engineering changes and discrepancy resolution.
• Oversees the maintenance of hardware and software configuration.
• Assesses and makes recommendations for disposition of equipment and tooling.

Education/Experience
AA degree in related discipline and typically 6 or more years of related experience
 
Job Number: Ph# 636-438-0314;
Job Location: Everett, WA
Rate: Hourly
Per Diem: Split
Overtime: Possible
Duration: 9 mos
Start Date: 1/8/2018
Input Date: 11/21/2017
Last Updated: 12/06/2017
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Michelle Fox
Address: WESTRIDGE OFFICE PARK
2646 HIGHWAY 109 STE 207

City, State: WILDWOOD, MO 63040
Phone: 636/438-0312
800 Phone: 866/277-3343
Fax Phone: 636/220-8284
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Engineer 4

Description:
Equipment & Tool Engineer 4


Develops program and project requirements, develops highly complex equipment and tooling concepts and designs solutions, including alternatives for the Production System. Validates analysis of technical data, influences product engineering design and makes robotics, automation or technical recommendations to support production system integration for a aerospace products. Leads the creation and modification of equipment and tooling definition at the program level. Executes project plans, provides input to Make/Buy decisions and partners with Procurement to meet program schedule, cost and quality targets. Ensures compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements. Leads gated reviews and develops plans for production readiness, preventative maintenance and spares. Validates contractual performance milestones. Develops and implements work-arounds and maintains configuration of hardware, software and documentation. Conducts studies and make recommendation for disposition of assets.

Degree and typical experience in engineering classification: Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.
 
Job Number: 17-27026
Job Location: Everett, WA
Per Diem: Split
Overtime: possible
Duration: 9 months
Start Date: 1/8/18
Input Date: 12/11/2017
Last Updated: 12/18/2017
Firm Name: ICONMA LLC
Attention: Constance Whitcomb
Address: 4620 E 53RD ST
City, State: DAVENPORT, IA 52807
Phone: 312/502-4795
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Engineer 4

Description:
Equipment & Tool Engineer 4

Location: Everett, WA
Duration: 9 months

Job Description:
Develops program and project requirements, develops highly complex equipment and tooling concepts and designs solutions, including alternatives for the Production System. Validates analysis of technical data, influences product engineering design and makes robotics, automation or technical recommendations to support production system integration for a aerospace products. Leads the creation and modification of equipment and tooling definition at the program level. Executes project plans, provides input to Make/Buy decisions and partners with Procurement to meet program schedule, cost and quality targets. Ensures compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements. Leads gated reviews and develops plans for production readiness, preventative maintenance and spares. Validates contractual performance milestones. Develops and implements work-arounds and maintains configuration of hardware, software and documentation. Conducts studies and make recommendation for disposition of assets.

Education:
Degree and typical experience in engineering classification: Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

Skill Code:
66U-Designer Engineer

If interested then please share updated resume at ravi@iconma.com
 
Job Number: 17-19959
Job Location: Everett,, WA
Input Date: 11/27/2017
Last Updated: 01/02/2018
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 1201 PACIFIC AVE STE 600
City, State: TACOMA, WA 98402
Phone: 253/213-2012
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Fitness & Wellness Specialist 2

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Fitness & Wellness Specialist 2
(U.S. Citizenship Required*)
Puyallup, WA
2017-5066

Responsibilities:
• Plans, administers and delivers wellness programs. Engages employees in services that support their well-being. Implements exercise programs that are safe, effective and engaging. Establishes policies and procedures for on-site wellness activities. Collaborates with corporate strategy, suppliers, business partners and others to effectively deliver services.

• Supports promotion and delivery of company wellness programs. Develops and instructs exercise programs that are safe and effective. Interacts with suppliers, business partners and others to effectively deliver services.

• Supports delivery of wellness activities in alignment with company wellness initiatives. Develops and delivers basic exercise programs to individuals or groups. Modifies exercise to individual needs and provides focused one on one coaching. Provides recommendations and referrals to company wellness programs.

• Performs facility monitoring, cleaning and maintenance. Assists with daily operations of facilities, participant recruitment and administrative duties. Supports overall operations of facilities.

• The position is 30 hours a week M-Th. Start and end times may very slightly due to work demands.

Qualification:
• Required – Certifications are current and annual re-fresher training that meets OSHA compliance requirements, must be provided for:
o American Heart Association Heartsaver CPR Training
o First Aid Training
o AED (Automated External Defibrillator) Training
o OSHA compliance training related to Bloodborne Pathogens
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
Bachelor's degree and typically 3 or more years' related work experience, a Master's degree and typically 1 or more years' related work experience or an equivalent combination of education and experience.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!

PLEASE APPLY ONLINE HERE: https://careers-moseleytechnical.icims.com/jobs/5066/fitness-%26-wellness-specialist-2/job?mode=view
 
Job Number: 2017-5066
Job Location: Puyallup, WA
Duration: 12 Months
Input Date: 12/05/2017
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Bob Jones
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Readiness Technician D

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Flight Readiness Technician D
(U.S. Citizenship Required*)
Palmdale, CA
2017-5053

Join our team as an Aircraft Inspector – Mechanic, Electrical, Electronics, and Mechanic Flight – to perform operational check out of aircraft prior to and during preflight.

Responsibilities:
• Perform activities prior to flight status and final inspection and daily maintenance of completed experimental aircraft or major modification to experimental aircraft.
• Inspect explosive and armament installations. Inspect and/or perform bench and flight line operational checkout and inspect, trouble-shooting, adjustment and repair of electrical and electronic systems. Inspect the calibration, adjustment, troubleshooting, repair and modification of electronic test equipment used exclusively by production and at times may be required to inspect the calibration, adjustment, trouble-shooting, repair and modification of other electronic test equipment as directed.
• Maintain aircraft historical records.
• Perform aircraft and/or spacecraft bench or flight line operational checkout, trouble-shooting, adjustment and repair of any electrical or electronic system.
• Fabricate, adjust, trouble shoot, repair and modify electronic test equipment.
• Modify parts such as skins, doors, aircraft frames, test panels, clips, brackets, angles and ribs without the aid of jigs and fixtures. Modify aircraft components or aircraft support equipment.
• Perform operational checkout, including diagnosing and correcting malfunctions, of hydraulic systems and mechanical systems.
• Operate engines during run-ups and troubleshoot when needed. Perform engine buildup as assigned.
• Install, repair, and replace tanks, power plants, generators, and aircraft engines. Install or replace reservoirs, etc. and repair leaks in same. Install or replace instruments such as fuel quantity, rate of climb and oil pressure indicators. Install and load ejection seats and guns. Install adjust, repair and replace structural parts and assemblies.
• Splice, route, clamp, solder, and string tie wires or wire bundles.
• Repair, install and hook up bomb, missile and rocket racks and pylons.
• Perform composite repairs

Qualification:
• Required – Active Secret Clearance with the ability to obtain a Top Secret.
• Knowledgeable and skilled in F15 mechanical, structural, power plant, hydraulic, pneumatic, and electrical systems operation and flightline methods and common shop practices.
• Knowledgeable and able to interpret and work from USAF technical orders (T.O.s), blueprints, sketches and written and verbal instructions.
• Proficient using computer systems for office and shop applications.
• Knowledgeable about and able to work in FOD controlled environments.
• Knowledgeable and able to apply shop math.
• Skilled in listening and interpersonal participation, and able to work with others as part of a team which includes giving and receiving feedback, and assisting others in completion of tasks.
• Able to complete and maintain all required training and certifications needed to do job efficiently.
• Able to climb, stand, bend, kneel, reach, crawl, and walk on or around aircraft or work stands and in confined spaces.
• F-15 Crew Chief experienced personnel, sound understanding of Air Force Tech Order usage and application. Experienced Flight Line operations, preflight, launch, recovery, and functional checkout of Hydraulics/Avionics/Mission Systems/Weapons loading.
• F-15 Electrical/Avionics experience, sound understanding of Air Force Tech Order usage and application. Versed in Flight Line Operations, Avionics/Electrical preflight and functional checkout of disturbed systems
• Weapons Load Standardization/Weapons loading: Plans, organizes, participate and directs aircraft armament systems maintenance activities. Establishes and evaluates performance and training standards, maintenance controls, and procedures. Checks methods and techniques used to load and unload munitions on aircraft, to repair and maintain aircraft release and gun systems, and to maintain, repair, and modify associated equipment.

*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Required – specialized vocational training or an Associate's degree and 3 to 5 years work related F15 experience or an equivalent combination of education and experience

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!



APPLY ONLINE HERE: https://careers-moseleytechnical.icims.com/jobs/5053/flight-readiness-technician-d/job?mode=view
 
Job Number: 2017-5053
Job Location: Palmdale, CA
Duration: 12 Months
Input Date: 12/01/2017
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: https://careers-moseleytechnical.icims.com/jobs/5053/flight-readiness-technician-d/job?mode=view
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Design

Description:
The Engineer, Flight Test position is responsible for the design, development, and coordination equipment to support Flight Test operations.

Duties and Responsibilities:
1. Designs, develops, coordinates, equipment, and Installations, to support Flight Test operations. Typical equipment and installations including ballast, data booms, cockpit displays, antennas, racks, and various transducers (acceleration, pressure, temperature, displacement, etc.).
2. Applies principles of chemistry, physics, and material behavior to develop metallic, non-metallic and composite material and processing specifications, fabrication and assembly processes. Applies material properties and design allowables, processing processes and quality engineering specifications.
3. Designs structural products and components of products, as well as Systems level integration, evaluates alternatives including cost and risk, supportability and analyses for total systems. Analyses are performed at all levels of total system to include: concept, design, fabrication, installation, and operation.
4. Examines engineering drawings and related documents for soundness, efficiency, and simplicity in design; completeness, clarity, and dimensional accuracy; correctness of materials and processes; conformity to design/drafting standards, design specifications, and practicability; and economy of fabrication, assembly, and installation.
5. Supports fabrication and installation of test equipment.
6. Resolves all issues related to design, documentation, procurement, fabrication, and installation.
Education, Work Experience, Certification and/or Licensure:
1. Bachelors’ degree in Aerospace Engineering, Electrical Engineering, Engineering Technology other related field preferred.
2. 5 years’ experience in aerospace design and testing.
Knowledge, Skills and Abilities:
1. Proficient in 3D multiple component designs and 2D fully dimensional and tolerance drawings. CATIA V5, PLM systems, TeamCenter strongly preferred.
2. Strong Microsoft Office Suites (Word, Excel, and PowerPoint) strongly preferred.
3. Strong computer operating systems skills.
4. Excellent oral and written communication skills.
5. Excellent interpersonal skills.
6. Experience with aircraft data acquisition systems.
7. Experience with FAA regulations.
8. Excellent analytical skills.
 
Job Number: 28-017
Job Location: Greensboro, NC
Rate: $35-$50
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 11/13/2017
Last Updated: 12/18/2017
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Engineer

Description:
Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM’s. Located in Seattle, they are a small but rapidly growing company in Seattle, WA. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants.

We are seeking full-time and contract Flight Test Engineers to join us in Moses Lake, WA. The ideal candidate will possess experimental flight test operational experience in either STC or Type Cert Programs. The individual in this position will be involved in a range of airplane flight test operations.

Essential Functions:
Coordinate test and certification requirements.
Author flight test and ground test plans including test hazard analysis.
Author instrumentation specifications, wire diagrams, FTEO packages, and calibration documentation.
Support instrumentation installation as required.
Support ground operations, including weight and balance activities, fuel management, pre-flight and post-flight tasks and briefings.
Support flight and ground test conduct and data collection.
Analyze test data and evaluate compliance with regulations.
Prepare certification test reports.
Domestic and occasional international travel is required.
Desired Qualifications:

5+ years relevant work experience related to experimental flight test operations. Experience in all of the above activities is not critical.
Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.
Ability to think critically, identify and synthesize important information necessary to inform client deliverables.
Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
Demonstrates personal accountability, initiative and versatility on a consistent basis with minimal guidance.
Proficient in working with Microsoft Office applications including Word, Excel, and PowerPoint. Ability to quickly learn to operate new software.
Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
 
Job Location: Moses Lake, WA
Per Diem: possible
Overtime: Yes
Duration: LT
Start Date: asap
Input Date: 11/30/2017
Last Updated: 12/07/2017
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
GNC Aerospace Engineer ( Gilbert, AZ ) 6954262

Description:
GNC Aerospace Engineer ( Gilbert, AZ ) 6954262
12+ Month Contract


Perform requirements management, vendor technical monitoring and guidance, and I&T activities for Guidance Navigation and Control (GNC) spacecraft component hardware. This includes analyzing system requirements to perform hardware component selection, developing component hardware Statement of Work (SOW), analyzing, allocating and decomposing higher level spacecraft requirements to their respective GNC components, monitoring component vendor’s development activities per the SOW and developing test procedures and automated tests of the GNC hardware to verify requirements, support spacecraft I&T activities, perform detailed spacecraft simulations using in house simulation tools, and analyze data to develop performance and functional data reports to support requirements.

Looking for satellite experience, launch vehicle, UAV and aircraft is acceptable if their related experience is with GNC hardware component. Without the GNC hardware component experience that’s a show stopper for the candidate. 5 – 8 years of experience is good

Required Capability:
Must have hardware electrical Perl background.
Additional Capability: Knowledge of Matlab & Simulink is a plus.
 
Job Number: 6954262
Job Location: Gilbert, AZ
Rate: open
Per Diem: Split
Overtime: Yes
Duration: 12 month
Start Date: ASAP
Input Date: 01/19/2018
Firm Name: TALENTPRO CONSULTING
Attention: Tim
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X101
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
General Repair Technician B

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

General Repair Technician B
(U.S. Citizenship Required*)
Universal City, TX
2017-5057

Responsibilities:
• Maintains a limited number of systems by removing, replacing, repairing or upgrading components.
• Troubleshoots problems to isolate faulty components.
• Conducts routine functional tests by operating equipment and using appropriate test equipment.
• Performs a variety of visual inspections as required by equipment maintenance documents.
• Documents maintenance and inspection actions as required.
• Works under general supervision.

Qualification:
• Proficient knowledge of electrical technology and schematics
• Able to support up to 10% travel

*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• High school diploma or GED and typically 1 or more years’ related experience or an equivalent combination of education and experience.
• Experience with manufacturing wiring bundles and electrical cables is highly desired.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!



APPLY ONLINE HERE: https://careers-moseleytechnical.icims.com/jobs/5057/general-repair-technician-b/job?mode=view
 
Job Number: 2017-5057
Job Location: Universal City, TX
Duration: 12 Months
Input Date: 12/01/2017
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: https://careers-moseleytechnical.icims.com/jobs/5057/general-repair-technician-b/job?mode=view
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Ground Support Equipment Design Engineer IV

Description:
Support Equipment Design Engineer IV

Location: Canoga Park, CA
Pay Rate: DOE ($50/hr - $60/hr)
Duration: 6 month W2 contract
Shift: Regular 40 hour week, OT possible
**MUST be a U.S. CITIZEN**
** Dual citizens and Permanent Residents are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

Duties:
** Ground Support Equipment (GSE) experience is required.
** Creo experience is required **
** 10+ years experience and a Bachelors Degree or equivalent are required **
**(Aerospace Assembly Support Equipment Design & Product Design Experience / Position requires knowledge of aerospace handling, installation and transportation methods and products to support / In this position you will be required to gather technical requirements from various operations, manufacturing, assembly and component disciplines / Support Equipment for Engine assembly, test and delivery of Large Liquid Rocket engines) **

-Under minimal supervision, performs engineering clean sheet design assignments requiring a wide application of CAD utilization, Data management/drawing tracking & Design Change implementation.
-Must be able to turn requirements into design concepts for team reviews and finalization of Technical Product Definition packages.
-Leads preliminary and critical design review preparations.
-Participates as a member of a project team responsible for escalating issues in a timely manner when commitment dates of assigned and individual work cannot be met.
-Review engineering drawings, design packages and related data for compliance to internal process requirements, accuracy and completeness.
-Support to Inter-organizational Product Teams are frequent and providing solutions to technical issues is required.

Skills:
-Aerospace Assembly Support Equipment Design & Product Design Experience Required (GSE).
-Position requires knowledge of aerospace handling, installation and transportation methods and products to support.
-In this position you will be required to gather technical requirements from various operations, manufacturing, assembly and component disciplines.
-Support Equipment for Engine assembly, test and delivery of Large Liquid Rocket engines.
-Must be an experienced engineer with knowledge of CAD using PTC Creo2.
-Position requires experience using CAD database management tools (Windchill/Teamcenter preferred).
-Pre-verification of CAD models and drawings in the PLM system is also required.
-Effective interpersonal and communication skills and must be able to operate effectively in a team.
-Expert knowledge of reading and interpreting drawings and related specifications is also required.
-Expert knowledge of Microsoft Word, PowerPoint and Excel is required (MS Word, MS PowerPoint, MS Excel) to track assignments of Product teams.

Education:
-Bachelors degree in an appropriate discipline and 10 years of related technical experience as engineering designer or equivalent combination of education and experience.
-Experience in Design and Manufacturing is a must.

Skills Required:
GROUND SUPPORT EQUIPMENT CREO AEROSPACE
 
Job Number: 8235
Job Location: Canoga Park, CA
Rate: 50-60
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 03/07/2018
Last Updated: 05/23/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Lead Systems Engineer

Description:
Lead System Engineer

Location: Windsor Locks, CT
Pay Rate: $75/hr
Duration: 1 year W2 contract
Shift: First, 8:00am to 5:00pm
**MUST be a U.S. CITIZEN**

Description/Comment:
An EMU Systems Engineer is a versatile professional with a base degree in Mechanical, Chemical, or Aerospace Engineering and experience in one or more disciplines such as electro-mechanical design, test, mechanical design, or analysis. Cross-functional experience is highly desired.

This Company at Windsor Locks was originally the Prime Contractor for NASA’s Extravehicular Mobility Unit and is currently responsible for the life support system (backpack) and other hardware. The EMU is a long standing system that has seen operation since 1981. As such, the ability to understand and build from previous analysis, design and fleet leader assessments is paramount. Reading engineering drawings, assessing operations and test sheets, as well as assessing data from ground and flight are all key abilities. EMU Systems Engineers are involved in assessing proposed engineering changes, making specification changes/updates, certification and recertification testing and reporting, customer interfacing for real time issues, monitoring system performance on EVA and many other related tasks, often involving customer interfacing.

Ability to perform gas and fluid analysis is important. Previous experience with High Pressure O2 is a big plus. Knowledge of the typical suite of MS products is required. Other software knowledge, including heat transfer, fluid and gas flow is a plus.

Both strong oral and written skills are required. Verbal and oral skills should be professional in character and precise. Candidates must be able to work in a small, highly scrutinized, tight knit team with the goal of crew safety as their defining characteristic.

Education/Requirements:
-Bachelors degree or higher
-Special NASA drug screen will be required post-employment
 
Job Number: 8280
Job Location: Windsor Locks, CT
Rate: 75
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/16/2017
Last Updated: 12/20/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Logistics Representative 2

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Logistics Representative 2
(U.S. Citizenship Required*)
Tinker AFB, OK
2017-5055

Join our team to support the E-3 AWACS Block 40/45 Modification program.

Responsibilities:
• Assist with researching, identifying and resolving customer supply support system inventory discrepancies.
• Collaborate with company organizations to identify and resolve system issues, and monitor logistics system performance.
• Prepare required company reports and perform any additional tasks identified. Required to receive, ship, transport, store and issue classified material as per related procedures and processes.
• Participate in receiving, inspecting, stocking, and dispositioning all hardware delivered to the OKC warehouse.
• Any additional tasks as identified by the Lead, Program or Manager.

Qualification:
• Required – Active Secret Clearance
• This is a 24/7 operation and candidates must be willing to work any shift – Days/Nights Monday – Thursday or Thursday – Sunday.
• Able to travel if required.
• Experienced in Logistics, Supply Chain, Inventory Control/Management.
• Proficient in Microsoft Exchange.
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor's degree and typically 3 or more years’ related work experience, a Master’s degree and typically 1 or more years’ related work experience or an equivalent combination of education and experience.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!

APPLY ONLINE HERE: https://careers-moseleytechnical.icims.com/jobs/5055/logistics-representative-2/job?mode=view
 
Job Number: 2017-5055
Job Location: Tinker AFB, OK
Duration: 7 Months
Input Date: 12/01/2017
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: https://careers-moseleytechnical.icims.com/jobs/5055/logistics-representative-2/job?mode=view
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manager Sales and Marketing - NTD

Description:
SUMMARY STATEMENT
Develops solutions to a variety of complex and unusual problems that require independent judgment and ingenuity to modify procedures standards related to Sales, Strategy and Marketing. Work is accomplished under general direction and completed work is reviewed for results.

ESSENTIAL FUNCTIONS AND KEY RESPONSIBILITIES
Accomplishes results through direct reports and staff working within established organizational objectives. Performs typical responsibilities of management requiring planning, evaluating, organizing, integrating, and coaching. Work is reviewed for adequacy in meeting cost, schedule and quality objectives.

Performs analysis to support due diligence reviews of new business opportunities. Coordinates responses to requests for proposals to ensure responses are correctly priced and meet the requirements of the customer as defined in the request for proposal.

Receives, coordinates and interprets new and current contracts requested by customer. Represents the Company and negotiates contract changes and amendments with the customer.


Researches market conditions and conducts feasibility studies to determine market demand for existing and new products or services. Identifies and projects the potential of the Company to enter into or increase market share within the transparency markets. Develops strategic marketing and business plans to increase the number of Company products and products lines in the market to meet revenue goals. Identify market growth opportunities and present these as part of new product development requirements.

Supervises initiatives for new product development based on analysis of the potential market. Provides analytical support for comprehensive business plans, including business modeling and business case/plan, customer segmentation, entry strategy, pricing, operations, technical requirements, risk evaluation, etc.

Partners with management to develop and execute comprehensive short and long-term sales plans and programs that will achieve the sales and revenue objectives of organization.

Contacts established and prospective customers in the assigned area to solicit orders in person or by phone. Discusses suitability of different types of products or services that will meet customer requirements. Quotes prices and credit terms and assists in preparation of sales contracts for orders obtained. Investigates and resolves customer problems with deliveries.

Prepares briefings and reports for executive management quarterly and/or as the business situation requires.

ANCILLARY JOB FUNCTIONS AND RESPONSIBILITIES
Performs other duties as required. These duties may include assignments in job classifications other than the primary assignment.

JOB QUALIFICATIONS
Formal Education, Training, and Professional Certification and Work Experience:
Bachelor Degree in an or other appropriate discipline from an accredited four-year college or university and eight (8) or more years related experience and training, or equivalent combination of education and experience. MBA preferred but not required. Previous aviation experience preferred but not required.

STAKEHOLDER BEHAVIORAL STANDARDS
All Stakeholders: Integrity, Teamwork, Communications, Customer Focus, Initiative and willingness to assist and transfer technical knowledge to less experienced Stakeholders.

ALL LEADERS
Approachability, Drive for Results, Motivating Others, Managerial Courage, Decision Quality.

ALL MANAGERS
Priority Setting, Planning and Delegation.

STANDARD JOB REQUIREMENTS
Must be able to arrive at work on time, work on-site, and attend regularly.
Must be able to read and write the English language, perform basic mathematical calculations and learn to interpret and comprehend company policies, procedures, safety instructions, and other like documents used in an aerospace manufacturing environment.
Competent in the use of standard software applications such as Microsoft Word and Excel and operate standard office equipment.
Make telephone and direct personal contact with internal and external personnel and make formal presentations to small or large groups.
Perform work of subordinates.

SPECIAL JOB REQUIREMENTS
Prior management and contract negotiation skills.
Sales and customer service experience.
Flexibility to respond to off-hours business needs
Freedom to travel domestically and internationally

SPECIAL TRAINING
Safety training applicable to the job and the general work area.

PHYSICAL REQUIREMENTS
While performing the duties of this job, the Stakeholder is regularly required to sit; use hands to finger, handle, or feel objects, tools or controls; reach with hands and arms; talk and hear. The Stakeholder frequently is required to move from one place to another. The Stakeholder must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, and ability to adjust focus. Travel between facilities. Must be able to work in excess of eight (8) hours per day and five
(5) days per week, if required. NRD: Must be able to ascend and descend stairs.

WORK ENVIRONMENT
Must be able to tolerate exposure to dust, fumes, noise, temperature and other elements in the shop area, if required. The noise level in the work environment is usually moderate.

MENTAL REQUIREMENTS
Able to work as a team member, highly organized, work well under stress and handle multiple priorities. Must possess interpersonal and communication skills to interact with other people inside and outside the company.
 
Job Number: 17-788-13388
Job Location: Midwest
Rate: 110-115K
Per Diem: No
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 01/08/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer - Level 1

Description:
Location: Lexington, KY
Rate: $20.00 - $35.00/HR
Duration: 1 year contract

**MUST be a U.S. Citizen**
**MUST have an Active Secret Clearance or to have had one with the last two (2) years**

Job Description:
- Designs manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, machining and material handling.
- Designs arrangement of machines within plant facilities to ensure most efficient and productive layout.
- Designs sequence of operations and specifies procedures for the fabrication of tools and equipment and other functions that affect product performance.
- Adapts machine or equipment design to factory and production conditions.
- May incorporate inspection and test requirements into the production plan.
- Inspects performance of machinery, equipment, and tools to verify their efficiency, and investigates and initiates corrective action of problems and deficiencies to ensure product quality.
- Develops manufacturing processes that are applicable to statistical process control, and may develop those techniques.
- Provides guidance to engineering regarding design concepts and specification requirements to best utilize equipment and manufacturing techniques.
- Ensures processes and procedures are in compliance with regulations.

Skill/Experience/Education
Mandatory:
- Mechanical, Electrical, Aerospace Engineering Degree.
- 1st, 2nd or 3rd shift schedules may be required.
- On-aircraft and off operations.
- In this role, the employee will review mechanical designs for ease of manufacturing and work closely with design engineering for improvements.
- The employee will use their knowledge of interpreting and reading engineering design drawings to develop fabrication routers/work instructions.
- This role will also require the employee to develop bill of materials (BOMs) based on drawing parts lists.
- The employee will work with manufacturing on issues and process improvements.
- Active Secret Security Clearance within the last 2 years.

Desired:
- Job scope experience
- Team Center Engineering experience
- Production Engineering experience
- Production Operations experience
- Mechanical Experience
- Electrical Experience
- Lean Six Sigma practices SOF CLSS contract, facility, and customer knowledge
- Ability to read and interpret engineering drawings
- Excellent verbal and written communications skills
 
Job Number: 7709
Job Location: Lexington, KY
Rate: $20.00 - $35.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 08/02/2017
Last Updated: 02/14/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Manufacturing Engineer II/III

Description:
Location: Canoga Park, CA
Rate: Level II = $35.00 - $39.00/HR
Level III = $40.00 - $48.00/HR
Duration: 6 month contract
Shift: Regular 40 hour week. OT Possible
Per Diem Split: Yes (if eligible)


** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


** Looking for go getters with positive, can-do attitudes. Candidates must be open to learning and be able to take initiative. This is by far the most important attribute needed **


Duties:
The Manufacturing Engineer classifications are responsible for design, fabrication, modification, analysis and evaluation of manufacturing operations, processes, procedures and production layouts for the support of manufacturing/assembly operations such as rocket motor propellant and/or insulation manufacture, equipment installation, machining, metal forming, welding and brazing, and material handling.


Skills:
Required Skills:
-Designing and planning of layout component fabrication, assembly and material handling, planning of sequence of operations, and specification procedures.
-The scope of responsibility will be for several mechanical components or as a process engineer supporting new and developing process.

Desired Skills:
-Tight tolerance machining, Welding, Design systems (ProE, CATIA, VisMockup, CAD/virtual manufacturing) .
-Manufacturing fabrication and assembly processes and systems. Verbal and written communication.
-Project management skills and MS Office applications ( Word, Excel).
-Experience with Maestro, Delmia and Windchill are preferred, not required.
-Aerospace experience preferred but not required.


Education:
- BS degree in Manufacturing /Industrial Technology or Engineering required
 
Job Number: 8010
Job Location: Canoga Park, CA
Rate: DOE
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 09/20/2018
Last Updated: 10/15/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II/III URGENT CA

Description:
160456/7347633
Job Title: Manufacturing Engineer II/III
48/hr max

Number of Positions: 10



Duties:


** Looking for go-getters with positive, can-do attitudes. Candidates must be open to learning and be able to take initiative. This is by far the most important attribute needed **
Also, Delmia, Maestro and Windchill are preferred, not required.




-There are two (2) Level II openings and two (2) Level III openings.



The Manufacturing Engineer classifications are responsible for design, fabrication, modification, analysis and evaluation of manufacturing operations, processes, procedures and production layouts for the support of manufacturing/assembly operations such as rocket motor propellant and/or insulation manufacture, equipment installation, machining, metal forming, welding and brazing, and material handling.

Skills:
Required Skills:

-Designing and planning of layout component fabrication, assembly and material handling, planning of sequence of operations, and specification procedures.

-The scope of responsibility will be for several mechanical components or as a process engineer supporting new and developing process.



Desired Skills:

-Tight tolerance machining, Welding, Design systems (ProE, CATIA, VisMockup, CAD/virtual manufacturing) .
-Manufacturing fabrication and assembly processes and systems.Verbal and written communication.

-Project management skills and MS Office applications ( Word, Excel).

-Experience with Maestro, Delmia and Windchill are preferred, not required.

-Aerospace experience preferred but not required.



Keywords:

-Manufacturing Engineer

-Propulsion components

Education:
BS degree in Manufacturing /Industrial Technology or Engineering required

Skills:
Required

MANUFACTURING ENGINEER AEROSPACE

State/Province: California
City/Town: Canoga Park

Start Date: 10/23/2017 Hours Per Week: 40.00
Est. End Date: 04/22/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-A7347633
Job Location: Canoga Park, CA
Rate: 48/hr max
Per Diem: no
Duration: 6 month contract
Input Date: 08/28/2018
Last Updated: 09/11/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Planner 3

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Manufacturing Planner 3
(U.S. Citizenship Required*)
Everett, WA
2017-4996

Responsibilities:
• Develops, implements and maintains various manufacturing plans, Bill of Materials, work instructions and illustrations to define and document as-built configuration.
• Develops manufacturing concepts and strategies to support business objectives.
• Develops and integrates suppliers, processes, materials, data and technology to meet manufacturing and delivery requirements.
• Reviews and approves supplier data to ensure manufacturing related requirements are met.
• Develops tooling requirements based on manufacturing and engineering requirements.
• Manages tools from initial design to end of use disposition. Investigates and resolves manufacturing related issues.
• Performs producibility assessments for part or product designs.
• Provides producibility input to design, manufacturing processes and manufacturing technologies to meet cost and schedules.
• Develops integrated work statements and sequencing of events to support delivery commitments.
• Drafts, updates and reviews processes and procedures to support business and regulatory agency requirements.
• Works under general direction.

Qualification:
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
AA degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!

TO APPLY, PLEASE VISIT OUR WEBSITE: https://careers-moseleytechnical.icims.com/jobs/4996/manufacturing-planner-3/job?mode=view
 
Job Number: 2017-4996
Job Location: Everett, WA
Duration: 10 Months
Input Date: 12/05/2017
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Bob Jones
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Planner 3

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Manufacturing Planner 3
(U.S. Citizenship Required*)
Everett, WA
2017-4997

Responsibilities:
• Develops, implements and maintains various manufacturing plans, Bills of Materials, work instructions and illustrations to define and document as-built configuration.
• Develops manufacturing concepts and strategies to support business objectives.
• Develops and integrates suppliers, processes, materials, data and technology to meet manufacturing and delivery requirements.
• Reviews and approves supplier data to ensure manufacturing related requirements are met.
• Develops tooling requirements based on manufacturing and engineering requirements. Manages tools from initial design to end of use disposition.
• Investigates and resolves manufacturing related issues.
• Performs producibility assessments for part or product designs. Provides producibility input to design, manufacturing processes and manufacturing technologies to meet cost and schedules.
• Develops integrated work statements and sequencing of events to support delivery commitments.
• Drafts, updates and reviews processes and procedures to support business and regulatory agency requirements.
• Works under general direction.

Qualification:
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
AA degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!

PLEASE APPLY ONLINE HERE: https://careers-moseleytechnical.icims.com/jobs/4997/manufacturing-planner-3/job?mode=view
 
Job Number: 2017-4997
Job Location: Everett, WA
Duration: 10 Months
Input Date: 12/05/2017
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Bob Jones
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Planner 4

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Manufacturing Planner 4
(U.S. Citizenship Required*)
Everett, WA
2017-4998

Responsibilities:
• Plans and leads department/organization processes for developing, implementing and maintaining various manufacturing plans, Bills of Materials, work instructions and illustrations to define and document as-built configuration.
• Develops and plans manufacturing concepts and strategies to support business objectives. Prepares build analyses and cost estimate reports.
• Leads integration of complex suppliers, processes, materials, data and technology to meet manufacturing and delivery requirements.
• Participates in source selection to ensure manufacturing requirements are met.
• Develops complex tooling requirements based on manufacturing and engineering requirements.
• Manages tooling from initial design to end of use disposition.
• Leads investigation and resolution of complex or systemic manufacturing related issues.
• Leads teams performing producibility assessments of design concepts.
• Supports enterprise level benchmarking to incorporate best practices.
• Leads development of complex work statements and sequencing of events to support delivery commitments.
• Develops scheduling templates for use by others.
• Drafts, updates and reviews processes and procedures to support business and regulatory agency requirements.
• Develops and documents new job practices, techniques and standards.
• Works under minimal direction.

Qualification:
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
AA degree in related discipline and typically 6 or more years of related experience or an equivalent combination of education and experience.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!

PLEASE APPLY ONLINE HERE: https://careers-moseleytechnical.icims.com/jobs/4998/manufacturing-planner-4/job?mode=view
 
Job Number: 2017-4998
Job Location: Everett, WA
Duration: 10 Months
Input Date: 12/05/2017
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Bob Jones
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Assembler

Description:
Our client, a market leader and technology innovator, is seeking talented professionals to deliver cutting edge solutions to their customers. Well-respected, with a global presence, our client consistently offers a powerful and robust portfolio of products, services and solutions that help customers successfully execute their missions in today’s dynamic environment. With unsurpassed engineering, using an open systems approach, our client solves the nation’s most complex challenges while foreseeing future needs.

Mechanical Assembler
(US Citizenship Required*)
Greensboro, NC
2017-4733

Assemble and inspect complex, high reliability Electro-Mechanical-Optical products from pictorial work instructions, travelers, drawings, and other documentation. Apply mechanical aptitude with attention to detail to achieve quality and productivity objectives. Work with other team members to eliminate manufacturing defects, material scrap, and process inefficiencies.

Work in a manufacturing environment that may include wearing personal protective equipment (such as steel toe shoes, safety glasses, ear plugs, respirator, etc), working with/near and disposal of hazardous material, and recurring lifting (50-75 pounds), standing, bending, squatting, pulling, and pushing.

Responsibilities:
• Perform high reliability assembly using manual tools, fixtures, and process machinery
• Understand and follow manufacturing work instructions and equipment operating procedures
• Safely perform work while wearing personal protective equipment
• Inspect own work, work of peers, and supplied material using various measuring tools
• Document assembly and inspection information on paper forms and in computer systems
• Clean and organize work area on a daily basis
• Perform additional tasks to support the efficient operation of the business

Qualifications:
• Required: Secret Security Clearance
• Active IPC Soldering Certification to any of following: IPC-610, J-STD-001, IPC-7711/7721
• Able to wear Personal Protective Equipment: Safety shoes, safety glasses, ear plugs, hard-hat, gloves, respirator
• Able to work with Hazardous Material: Use and disposal of hazardous chemicals/waste
• Able to do physical work: Lifting (50 – 60 pounds), gripping, standing, bending, squatting, pulling, pushing, and reaching
• Able to be flexible with scheduling: Planned and unplanned overtime may be required

*US Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• High School Diploma or equivalent, and 3-5 years’ experience in a manufacturing environment
• Passing score on the following ACT WorkKeys Assessments:
o Applied Mathematics
o Locating Information
o Reading for Information
o Workplace Observation
• Passing score on the Bennett Mechanical Comprehension Test

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2017-4733
Job Location: Greensboro, NC
Duration: 6 Months
Input Date: 12/01/2017
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Sue Parker
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
Mechanical Design Engineer

Location: Windsor Locks, CT
Rate: $48.25/HR
Duration: 2 year contract
Shift: 1st Shift

**Must be a U.S. Citizen or Permanent Resident**

Job Description:
- The Mechanical Design engineer will be responsible for Mechanical Engineering activities associated with the design, development, and qualification testing of thermal control and environmental life support components and assemblies for various aerospace applications including NASA’s Crew Exploration Vehicle, NASA’s International Space Station as well other aerospace and satellite platforms.
- This is an individual contributor level position.
- Manages teams and multiple projects in research, design, and development of mechanical applications to the planning, design, development, and testing of mechanical and/or electromechanical systems, instruments, controls, engines, and ground test / mechanical tests.
- Additionally responsible for the CAD support of design projects and execution of Engineering design changes.

Requirements:
- Bachelor’s Degree
- 8-15 years’ experience desired.
- The candidate must be a US person.
- Knowledgeable in Pro-E/CREO modeling fundamentals, stress and fatigue analysis, machine design, and material selection.
- Previous experience in aerospace structures and engineering fluid component design required.
- Competence in use of NASTRAN, ANSYS, or simulate stress analysis packages desired.
- Knowledge of drawings, geometric tolerancing, and drawing interpretation.
- Experience with manufacturing techniques for limited production hardware.
- Ability to work within a matrix organization to achieve team and program goals.
- The successful candidate will possess a positive 'can do' attitude, good presentation skills, respect for others, confidence, and patience.
 
Job Number: 8285
Job Location: Windsor Locks, CT
Rate: $48.25/HR
Per Diem: NO
Overtime: Possible
Duration: 2 yr
Input Date: 03/07/2018
Last Updated: 04/13/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
NC Programmers - Seattle, WA area

Description:
Keltia Design, Inc. is a technical support services company supplying recruiting, training, and engineering design services to customers in the Automotive, Aerospace and other Hi-Tech industries on a permanent or contractual basis. We have been in business for over 17 years.

Our North Seattle area based client has a major project and hiring all phases of experienced NC programmers for aerospace manufacturing parts. If you are interested or know of someone who may be interested, please send an updated resume with pay requirements and availability. There are opportunities for both contract and direct hire roles.
 
Job Number: SM1217
Job Location: Everett, WA
Rate: open
Per Diem: possible
Overtime: yes
Start Date: jan 2018
Input Date: 12/04/2017
Firm Name: KELTIA DESIGN INC
Attention: Shawn Murphy
Address: 2615 W CASINO RD UNIT 1A
City, State: EVERETT, WA 98204
Phone: 206/368-9812
Fax Phone: 206/237-8950
Website: www.keltia-design.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
NX Mechanical Design Engineer IV (Propulsion)

Description:
Location: Jupiter, FL
Rate: $50.00 - $60.00/HR
Duration: 1 year contract
Shift: 1st Shift

** Candidates must either have a current Secret clearance or have had a Secret clearance in the last two years **
** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

Duties:
- Perform and support mechanical design activities for high speed propulsion components and assemblies from concept through final detailed design.
- This position requires the development of design concepts, 3D models, and support the development of detailed drawings for the manufacture of parts.
- Activity requires key interactions with component analysis, manufacturing, project engineering, quality and customer support groups.
- Develop design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, and synthesis of higher level reqmts to component level reqmts.
- Conduct trade studies and develop schedules, test plans, component specifications and procedures as reqd. Applicant must have prior aerospace design or development experience associated with design of actively cooled structures operating in high heat flux environments.
- Under general direction, performs engineering design assignments requiring a wide application of advanced principles, theories and concepts in the field plus a working knowledge of other related disciplines.
- Perform propulsion system to airframe and test article to test facility integration.
- Provides imaginative, thorough, and practicable solutions to a wide range of technical design problems.
- Performs design calculations to validate design requirements.
- Provides data in support of contract data requirements list (CDRL) submittals.
- Participates in preliminary and critical design reviews, drawing reviews, recommending changes as necessary.
- Participates as a member of a project team.
- Responsible for escalating in a timely manner when commitment dates of assigned and individual work cannot be met.
- Check engineering drawings, design packages and related data for compliance to contractual requirements, accuracy, completeness and geometric tolerance standards.
- Work is reviewed upon completion for adequacy in meeting objectives.
- Inter-organizational and resident customer contacts are frequent while outside customer contacts are occasional in providing solutions to technical problems associated with specific assignment.

Skills:
** Candidates must either have a current Secret clearance or have had a Secret clearance in the last two years **
- Working knowledge of geometric dimensioning and tolerancing (GD&T), the ability to read and interpret drawings and related specifications is required.
- Understanding of appropriate codes, regulations and specifications as well as applicable customer requirements.
- Prior propulsion to airframe and test facility integration experience desired.
- Knowledge of Computer-Aided Design (CAD – Siemens NX preferred) and Computer-Aided Manufacture (CAM) methods and techniques.
- Knowledge of design practices, manufacturing techniques and inspection requirements. May require the use of various computer systems to produce data, analysis and reports.
- Position requires experience using CAD database management tools (WindChill preferred).
- Effective interpersonal and communication skills and must be able to operate effectively in a team environment.
- Working knowledge of Microsoft Word and PowerPoint is required (MS Word, MS Powerpoint).
- Knowledge of manufacturing techniques and inspection requirements is a plus.

Education:
** Candidates must either have a current Secret clearance or have had a Secret clearance in the last two years **
- Bachelor’s or Master’s degree in an appropriate discipline and nine (9) years of related technical experience as engineering designer or equivalent combination of education and experience.
 
Job Number: 7961
Job Location: Jupiter, FL
Rate: $50.00 - $60.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 10/23/2017
Last Updated: 01/17/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Non-Metallics Materials Engineer III CA

Description:
Job Title: Non-Metallics Materials Engineer III
45/hr max

Duties: ** Candidates must be U.S. Citizens **** Permanent residents are NOT eligible for this role **** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

-Materials Engineer providing non-metallic material-related support for the design, development, and production of liquid rocket engine systems.
-Knowledge of plastics, composites, ablatives, ceramics, and cleaning and other chemical processes preferred.
-Select materials for product application, define processes, review engineering drawings for materials and processes concerns, generate reports to document technical conclusions/findings, and present data during various design reviews.
-While general materials knowledge is required, direct experience in materials and processes engineering associated with liquid rocket engine design and production is preferred
Skills: -Strong written and oral communication skills.
-Fluency in MS Office applications including MS Word, Excel, and PPT.
Keywords:
Education: -Bachelor degree in Materials, Chemical, or Metallurgical Engineering discipline, or in Chemistry, is preferred, and minimum of five years of directly related technical experience in engineering disciplines or an equivalent combination of education and experience.
-Advanced degree typically preferred.

Skills and Experience:
Required Skills:
MATERIALS ENGINEERING
AEROSPACE

# of Positions: 1

Location:
Canoga Park, CA


Schedule:
Start Date: 11/13/2017
Estimated End Date: 11/13/2018
Hours Per Week: 40.00
Hours Per Day: 8.00
 
Job Number: MB-7359765
Job Location: Canoga Park, CA
Rate: 45/hr max
Duration: 12 month contract
Input Date: 01/10/2018
Last Updated: 01/12/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
PTC-CREO Expert – Aerospace - Contract

Description:
PTC-CREO Expert – Aerospace - Contract

On behalf of our client Ingenium is recruiting and evaluating candidates who are PTC CREO experts with experience in design and detailed development of 3D models thru the release of checked 2D drawings of complex mechanical aerospace components. Housings, forging/casting, complex tight tolerance machined parts, gears, shafts and related assemblies.

This assignment will support conversion of existing designs, models and prints of complex parts/assemblies from legacy CAD (SolidEdge) systems to PTC CREO.

Position is Onsite in the Gulf coast of the Southern US.
Position is Contract with a 6-12 month expected duration.

US Persons or Citizenship required. No Visa sponsorship possible due to the nature of the work,

CAD Designer requirements
• Generate three-dimensional models of engine parts/assemblies using PTC-CREO 2.0 or above.
• Aerospace CAD Design experience
• Generate associative detail drawings from 3D models in accordance with latest ANSI and CMI standards with GD&T where necessary.
• Ability to check 3D models/drawings with support thru system release
• PTC-CREO 2.0 or above - 3 years minimum related experience.
• Six or more years’ experience in the design of complex parts (castings and forgings).
• Six or more years’ experience with GD&T.
• Proficient/full understanding in converting inch dimensions and tolerances into metric equivalent.
• BONUS – Understanding of German language (spoken and written)

Key points
• PTC CREO, SolidEdge, machined parts design, model/drawing CAD conversion experience
• Not looking for Structural, Composite, Tooling, Harness, Oil etc. designers; Aerospace - Engine, Landing Gear, fight control or similar systems design experience.
• Compensation commensurate with skill and experience

Education: Bachelor’s degree preferred
Associates degree and related CAD/Design engineering experience considered

Ingenium Technologies Corporation is a leading engineering services organization, providing outsourcing, consulting, and talent solutions.

Employment Statement: Ingenium Technologies is an equal opportunity employer and does not discriminate on the basis of race, color, religion, gender, age, national origin, disability, veteran status, sexual orientation or any other classification protected by federal, state or local law. Proof of eligibility for employment will be required upon employment.
 
Job Number: 115287
Job Location: Rockford, IL
Rate: 50/hr.
Per Diem: possible
Overtime: possible
Duration: 6-12 Months
Start Date: 1-8-18
Input Date: 12/01/2017
Firm Name: INGENIUM TECHNOLOGIES
Attention: Dave Johnson
Address: 4216 MARAY DR UNIT A1
City, State: ROCKFORD, IL 61107
Phone: 815/399-8803 X255
Fax Phone: 815/399-8804
Website: www.ingeniumtech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Powerplant Engineer

Description:
• Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

Unique Skills:
• The successful Powerplant Engineer candidate should have aerospace experience and specific experience working with engine and engine subsystem installations
• Required experience also to include knowledge of:
o Airframe/Engine/Nacelle integration (Fire Protection)
o Certification plans
o Capability in managing engine suppliers and resolving technical issues
o Strong communication and organizational skills.

Education and Experience Requirements:
• Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.

Essential Functions:
• Contributes to planning, developing and coordinating of important engineering projects
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problem
• Determines and develops own approach to solutions within schedule and cost objectives
• Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
• Acts as liaison with representatives outside of the assigned group/area
• Actively works to improve daily processes and ensures all work meets customer requirements
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
 
Job Number: 24-207
Job Location: Savannah, GA
Rate: $58 - $63
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 10/16/2017
Last Updated: 12/08/2017
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Product Repair/Mod Tech C

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Product Repair/Mod Tech C
(U.S. Citizenship Required*)
Cannon AFB, NM
2017-5050

Responsibilities:
• Assembles, disassembles and/or modifies systems by changing, removing, replacing or upgrading aerospace vehicle components to correct failures or implement changes.
• Oversees assembly, disassembly or overhaul.
• Configures aerospace vehicles and bench test equipment.
• Troubleshoots complex pneumatic, hydraulic and electrical systems to isolate mechanical or electrical faults and repair faulty components.
• Performs validation/verification testing of systems and components.
• Documents procedures and established processes to ensure contractual and regulatory compliance (e.g., repairs, test results, applicable modifications and inspection results).
• Inspects components and verifies repairs for flight worthiness requirements.
• Oversees training. Works under general direction.

Qualification:
• Required – Active Secret Clearance.
• Required – Passport for travel to International assignments whenever needed. No scheduled trips at this time.
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
High school diploma or GED and typically 4 or more years’ related experience or an equivalent combination of education and experience.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!



APPLY ONLINE HERE: https://careers-moseleytechnical.icims.com/jobs/5050/product-repair-mod-tech-c/job?mode=view
 
Job Number: 2017-5050
Job Location: Cannon AFB, NM
Duration: 12 Months
Input Date: 12/01/2017
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: https://careers-moseleytechnical.icims.com/jobs/5050/product-repair-mod-tech-c/job?mode=view
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Product Repair/Mod Tech C

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Product Repair/Mod Tech C
(U.S. Citizenship Required*)
Eglin AFB, FL
2017-5046

Responsibilities:
• Performs end-of-runway, postflight, preflight, thru-flight, and phase inspections. Performs integrated combat turns and hot pit refuels. Advises on problems maintaining, servicing, and inspecting aircraft and related aerospace equipment. Uses technical data to diagnose and solve maintenance problems on aircraft systems. Interprets and advises on maintenance procedures and policies to repair aircraft and related equipment.
• Troubleshoots and maintains F-15E aircraft structures, systems, components, and related equipment. Removes and installs aircraft components. Conducts functional tests of repaired components and systems. Adjusts, aligns, and rigs aircraft systems. Supervises and performs aircraft jacking, lifting, and towing operations.
• Performs aircraft and component operational checks. Interprets inspection findings and determines adequacy of corrective actions.
• Inspects and checks components for clearances, tolerances, proper installation, and operation. Inspects and operates powered and nonpowered aerospace ground equipment. Inspects and identifies aircraft corrosion for prevention and repair.
• Reviews maintenance forms, aircraft records, automated maintenance data systems, and historical reports to ensure complete documentation.
• Inventories and maintains aircraft equipment.

Qualification:
• Required – Interim Secret Clearance or clearance on hold status. Candidates without a clearance or ability to obtain one within 2 weeks will not be considered.
• Must possess own hand tools
• Willing to work any shift and overtime as required

*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
High school diploma or GED and typically 4 or more years’ related experience or an equivalent combination of education and experience.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!

Apply here: https://careers-moseleytechnical.icims.com/jobs/5046/product-repair-mod-tech-c/job?mode=view
 
Job Number: 2017-5046
Job Location: Eglin AFB, FL
Duration: 12 Months
Input Date: 12/01/2017
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Andrea Moseley
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Product Repair/Mod Tech C

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Product Repair/Mod Tech C
(U.S. Citizenship Required*)
Hurlburt Field, FL
2017-5049

Responsibilities:
• Assembles, disassembles and/or modifies systems by changing, removing, replacing or upgrading aerospace vehicle components to correct failures or implement changes.
• Oversees assembly, disassembly or overhaul.
• Configures aerospace vehicles and bench test equipment.
• Troubleshoots complex pneumatic, hydraulic and electrical systems to isolate mechanical or electrical faults and repair faulty components.
• Performs validation/verification testing of systems and components.
• Documents procedures and established processes to ensure contractual and regulatory compliance (e.g., repairs, test results, applicable modifications and inspection results).
• Inspects components and verifies repairs for flight worthiness requirements.
• Oversees training. Works under general direction.
• 2nd shift position

Qualification:
• Required – Active Secret Clearance.
• At times travel may be necessary, about 10% of the time. No scheduled international travel at this time.
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
High school diploma or GED and typically 4 or more years’ related experience or an equivalent combination of education and experience.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!



APPLY ONLINE HERE: https://careers-moseleytechnical.icims.com/jobs/5049/product-repair-mod-tech-c/job?mode=view
 
Job Number: 2017-5049
Job Location: Hurlburt Field, FL
Duration: 12 Months
Input Date: 12/01/2017
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: https://careers-moseleytechnical.icims.com/jobs/5049/product-repair-mod-tech-c/job?mode=view
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Product Repair/Mod Tech C

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Product Repair/Mod Tech C
(U.S. Citizenship Required*)
NAS Lenmoore, CA
2017-5059

Responsibilities:
• Assembles, disassembles and/or modifies systems by changing, removing, replacing or upgrading aerospace vehicle components to correct failures or implement changes.
• Oversees assembly, disassembly or overhaul.
• Configures aerospace vehicles and bench test equipment.
• Troubleshoots complex pneumatic, hydraulic and electrical systems to isolate mechanical or electrical faults and repair faulty components.
• Performs validation/verification testing of systems and components.
• Documents procedures and established processes to ensure contractual and regulatory compliance (e.g., repairs, test results, applicable modifications and inspection results).
• Inspects components and verifies repairs for flight worthiness requirements.
• Oversees training. Works under general direction.

Qualification:
• Required – Active Secret Clearance
• Experienced aircraft mechanic who can interpret schematics, assembly drawings, and technical manuals as well as read engineering drawings
• Able to travel domestically or internationally as required to support short-notice contingencies and priority workloads.
• Able to bring your own tools.

*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
High school diploma or GED and typically 4 or more years’ related experience or an equivalent combination of education and experience.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!


APPLY ONLINE HERE: https://careers-moseleytechnical.icims.com/jobs/5059/product-repair-mod-tech-c/job?mode=view
 
Job Number: 2017-5059
Job Location: NAS Lenmoore, CA
Duration: 12 Months
Input Date: 12/01/2017
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: https://careers-moseleytechnical.icims.com/jobs/5059/product-repair-mod-tech-c/job?mode=view
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Product Repair/Mod Tech C

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Product Repair/Mod Tech C
(U.S. Citizenship Required*)
Eglin AFB, FL
2017-5045

Responsibilities:
• Perform efforts associated with sealing, painting, shimming, and preserving structure in accordance with standard repair processes

Qualification:
• Required – Active Interim Secret clearance or have a clearance in hold status. Only candidates with a clearance or ability to obtain within two weeks will be considered.
• Possess own hand tools.
• Able any shift and overtime as required.
• Able to perform close tolerance drilling, reaming, removal, and installation to critical support structures and fracture critical areas.
• Able to locate blind holes necessary to install new structural items to existing structure..
• Demonstrates the capability to read and interpret engineering drawings, technical orders, process specification, and retrofit requirements to perform structural modification/repair.
• Experienced in the use of tooling assemblies and fixtures for depot level modification and repair of structural parts.

*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
High school diploma or GED and typically 4 or more years’ related experience or an equivalent combination of education and experience.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2017-5045
Job Location: Eglin AFB, FL
Duration: 12 Months
Input Date: 12/01/2017
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Susan Earp
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Product Repair/Mod Tech C

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Product Repair/Mod Tech C
(U.S. Citizenship Required*)
Cannon AFB, NM
2017-5051

Responsibilities:
• Assembles, disassembles and/or modifies systems by changing, removing, replacing or upgrading aerospace vehicle components to correct failures or implement changes.
• Oversees assembly, disassembly or overhaul.
• Configures aerospace vehicles and bench test equipment.
• Troubleshoots complex pneumatic, hydraulic and electrical systems to isolate mechanical or electrical faults and repair faulty components.
• Performs validation/verification testing of systems and components.
• Documents procedures and established processes to ensure contractual and regulatory compliance (e.g., repairs, test results, applicable modifications and inspection results). Inspects components and verifies repairs for flight worthiness requirements.
• Oversees training. Works under general direction.

Qualification:
• Required – Active Secret Clearance
• Required – Passport for travel to International assignments whenever needed. No scheduled trips at this time.
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• High school diploma or GED and typically 4 or more years’ related experience or an equivalent combination of education and experience.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!



APPLY ONLINE HERE:https://careers-moseleytechnical.icims.com/jobs/5051/product-repair-mod-tech-c/job?mode=view
 
Job Number: 2017-5051
Job Location: Cannon AFB, NM
Duration: 12 Months
Input Date: 12/01/2017
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: https://careers-moseleytechnical.icims.com/jobs/5051/product-repair-mod-tech-c/job?mode=view
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Product Repair/Mod Tech C

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Product Repair/Mod Tech C
(U.S. Citizenship Required*)
Fort Walton Beach, FL
2017-5048

Responsibilities:
• Assembles, disassembles and/or modifies systems by changing, removing, replacing or upgrading aerospace vehicle components to correct failures or implement changes.
• Oversees assembly, disassembly or overhaul.
• Configures aerospace vehicles and bench test equipment.
• Troubleshoots complex pneumatic, hydraulic and electrical systems to isolate mechanical or electrical faults and repair faulty components.
• Performs validation/verification testing of systems and components.
• Documents procedures and established processes to ensure contractual and regulatory compliance (e.g., repairs, test results, applicable modifications and inspection results).
• Inspects components and verifies repairs for flight worthiness requirements.
• Oversees training. Works under general direction.
• 2nd Shift position

Qualification:
• Required – Active Secret Clearance
• Occasional travel is required both domestically and internationally at times to perform depot level modifications. Current passport is required. No scheduled trips at this time.

*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
High school diploma or GED and typically 4 or more years’ related experience or an equivalent combination of education and experience.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!



APPLY ONLINE HERE: https://careers-moseleytechnical.icims.com/jobs/5048/product-repair-mod-tech-c/job?mode=view
 
Job Number: 2017-5048
Job Location: Ft. Walton Beach, FL
Duration: 12 Months
Input Date: 12/01/2017
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: https://careers-moseleytechnical.icims.com/jobs/5048/product-repair-mod-tech-c/job?mode=view
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Product Repair/Mod Tech C

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Product Repair/Mod Tech C
(U.S. Citizenship Required*)
Eglin AFB, FL
2017-5047

Responsibilities:
• Perform efforts associated with sealing, wrapping, bonding, tying, and closure of wire harnesses and cables in accordance with standard processes (electrical).

Qualification:
• Required – Interim Secret Clearance
• Able to perform connector terminations including shielded wires, coaxial cables, and fiber optic wiring.
• Able and understanding of routing instructions and handling of harnesses.
• Demonstrates the capability to read and interpret engineering drawings, technical orders, process specification, and retrofit requirements to perform electrical modification/repair.
• Experienced in the use of tooling assemblies and fixtures for depot level modification and repair of electrical wiring.

*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
High school diploma or GED and typically 4 or more years’ related experience or an equivalent combination of education and experience.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!



APPLY HERE: https://careers-moseleytechnical.icims.com/jobs/5047/product-repair-mod-tech-c/job?mode=view
 
Job Number: 2017-5047
Job Location: Eglin AFB, FL
Duration: 12 Months
Input Date: 12/01/2017
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: https://careers-moseleytechnical.icims.com/jobs/5047/product-repair-mod-tech-c/job?mode=view
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Product Repair/Mod Tech C

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Product Repair/Mod Tech C
(U.S. Citizenship Required*)
NAS Lenmoore, CA
2017-5058

Responsibilities:
• Assembles, disassembles and/or modifies systems by changing, removing, replacing or upgrading aerospace vehicle components to correct failures or implement changes.
• Oversees assembly, disassembly or overhaul.
• Configures aerospace vehicles and bench test equipment.
• Troubleshoots complex pneumatic, hydraulic and electrical systems to isolate mechanical or electrical faults and repair faulty components.
• Performs validation/verification testing of systems and components.
• Documents procedures and established processes to ensure contractual and regulatory compliance (e.g., repairs, test results, applicable modifications and inspection results).
• Inspects components and verifies repairs for flight worthiness requirements.
• Oversees training. Works under general direction.

Qualification:
• Required – Active Secret Clearance
• Required – Intermediate proficiency in structures and aircraft structures assembly
• Required – Able to interpret schematics, assembly drawings, and technical manuals as well as read engineering drawings
• Able to travel domestically or internationally as required to support short-notice contingencies and priority workloads.
• Able to bring your own tools.

*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
High school diploma or GED and typically 4 or more years’ related experience or an equivalent combination of education and experience.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!


APPLY ONLINE HERE: https://careers-moseleytechnical.icims.com/jobs/5058/product-repair-mod-tech-c/job?mode=view
 
Job Number: 2017-5058
Job Location: NAS Lenmoore, CA
Duration: 12 Months
Input Date: 12/01/2017
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: https://careers-moseleytechnical.icims.com/jobs/5058/product-repair-mod-tech-c/job?mode=view
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Program Scheduler

Description:
Program Scheduler
Stennis Space Center, MS
Rate: $28-$30

Duties: Schedule various programs and production activities into one cohesive integrated master schedule. Use Oracle MPS/MRP to drive time-phased material / resource requirements and inter-site demand. Provide management with a clear critical path to deliveries and report bottlenecks and constraints.
Skills: Required:
MS Project
APICS certification preferred
ERP/MRP experience
Production Scheduling or Capacity Planning experience

Desired: Aerospace environment (scheduling or planning)

Education: Bachelors Degree
 
Job Number: 8214
Job Location: Stennis Space Center, MS
Rate: $28-$30
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 11/29/2017
Last Updated: 01/17/2018
Firm Name: INCONEN CORPORATION
Attention: Brad
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Program Scheduler

Description:
Duties: Schedule various programs and production activities into one cohesive integrated master schedule. Use Oracle MPS/MRP to drive time-phased material / resource requirements and inter-site demand. Provide management with a clear critical path to deliveries and report bottlenecks and constraints.
Skills: Required:
MS Project
APICS certification preferred
ERP/MRP experience
Production Scheduling or Capacity Planning experience

Desired: Aerospace environment (scheduling or planning)
Keywords:
Education: Bachelors Degree
 
Job Number: 7330310
Job Location: Stennis Space Center, MS
Rate: 30.00HR
Duration: 6 months
Start Date: ASAP
Input Date: 11/08/2017
Last Updated: 01/02/2018
Firm Name: MIDCOM CORPORATION
Attention: Maurice Bradford
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Engineer / Component Product Engineer II - III (Valves & Actuators) CA

Description:
160214/7333750
Job Title: Project Engineer / Component Product Engineer II - III (Valves & Actuators)

Number of Positions: 2

5 to 10 years of experience

Duties: ** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


** This is NOT a Designer role. Please make sure that all candidates with a Designer background or expectation are aware of this **

** Manager likes to see college GPA's on resumes **


-Position is for a Component Product Engineer / Project Engineer for the development, fabrication and test of rocket engine valves and actuators.

Skills: -Experience with liquid rocket propulsion systems desired.
-Understanding and use of analytical, design or process procedures pertinent to Rocket engine valve and actuator advanced development.
-Ability to read and interpret technical drawings and specifications, develop planning and procedures for assembly and test; Ability to communicate clearly and concisely; effective presentation and report writing skills will be required.
-Project skills in developing MS Project scheduling and Earned Value Measurement Systems is a plus.
-May require the use of engineering test equipment, CAD, and/or various computer systems.
-Ability to operate effectively in a team environment.
-Demonstrated leadership skills are highly desireable.
Education: BS Degree in Mechanical Engineering, Aerospace Engineering is required, plus 3 years experience in related field. MSME/AE degree is highly desireable.



Skills: Required
• PROJECT ENGINEER
• COMPONENT ENGINEERING

State/Province: California
City/Town: Canoga Park



Start Date: 09/11/2017 Hours Per Week: 40.00
Est. End Date: 03/11/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7333750
Job Location: Canoga Park, CA
Rate: 45/hr max
Duration: 6 month contract
Input Date: 10/12/2017
Last Updated: 12/15/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Engineer/Component Product Engineer II-III (Valves & Acutators

Description:
Location: Canoga Park, CA
Rate: $35.00 - $45.00/HR
Duration: 6 month contract


** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


Duties:
** This is NOT a Designer role**
-Position is for a Component Product Engineer / Project Engineer for the development, fabrication and test of rocket engine valves and actuators.


Skills:
-Experience with liquid rocket propulsion systems desired.
-Understanding and use of analytical, design or process procedures pertinent to Rocket engine valve and actuator advanced development.
-Ability to read and interpret technical drawings and specifications, develop planning and procedures for assembly and test; Ability to communicate clearly and concisely; effective presentation and report writing skills will be required.
-Project skills in developing MS Project scheduling and Earned Value Measurement Systems is a plus.
-May require the use of engineering test equipment, CAD, and/or various computer systems.
-Ability to operate effectively in a team environment.
-Demonstrated leadership skills are highly desireable.

Education:
BS Degree in Mechanical Engineering, Aerospace Engineering is required, plus 5 - 10 years experience in related field. MSME/AE degree is highly desireable.
 
Job Number: 7823
Job Location: Canoga Park, CA
Rate: $35.00 - $45.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Input Date: 10/11/2017
Last Updated: 12/18/2017
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Manager III Technical ( Plymouth, MN ) 7851097

Description:
Project Manager III Technical ( Plymouth, MN ) 7851097
5 month plus contract

Pay rate: $50 - 75 /hr depending on experience


**Will develop special test equipment. Need asst. tracking projects and scheduling tasks (juggling ~15 programs.) Will use a system to help manage workloads/deadlines.
Will Set up the Master Project Plan. Bachelors is important (Electrical Eng.) Labview exp key, PMP Cert REQUIRED.
Military exp is helpful. Should have exp in a relevant industry.
Will need to meet basic quals. listed below. In interview, will ask about exp w/ tools listed below.
Will ask if have designed electrical circuit boars, use of tools, and level of knowledge.
Will ask about Labview - installation, programming, and architecture. If have military exp, will ask about results achieved.

Program team consists of ~9 test eng. supporting ~12 programs at a time. Will report to Dir. of Eng and get direction from a Prog. Mgr.**

Creates, maintains, and tracks projects for special electronic and guidance subsystem test equipment. Ensures project content is delivered on-time and within budget. Assembles a resource-loaded master schedule for all projects in the special test equipment team and identifies recommended actions for resources and schedule. Prepares reports for upper management regarding status of projects.

Required qualifications:
Bachelor's degree
PMP certification
2 years experience as a project manager or program manager
U.S. citizen

Preferred qualifications:
Bachelor's degree in Electrical Engineering
5 years experience as a project manager or program manager
Experience as non-commissioned officer in the military
Experience in LabView programming
Experience managing projects in the aerospace or defense industries
Ability to travel 10-25% of the time within the US for launch events
 
Job Number: 7851097
Job Location: Plymouth, MN
Rate: 75
Per Diem: Split
Overtime: YEs
Duration: 5 month
Start Date: ASAP
Input Date: 01/01/2018
Firm Name: TALENTPRO CONSULTING
Attention: Tim
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X101
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Assurance Eng II

Description:
UNIQUE SKILLS
Position will be located in Flight Test area Experienced in providing support for issues related to Flight Test operations by partnering with all relative stakeholders such as engineering, procurement, and FT operations is highly preferred. Must be able to liaison with aircraft QC, MRB and supplier to ensure all repair documentation is submitted in a timely manner. Required to be proficient in Solumina, including experience reviewing provided documentation prior to sending to MRB engineering for review. Current GAC Quality MRB authority a plus. Must be able to coordinate with applicable groups for Flight Test parts returned to vendor for repair/modification. Will provide ancillary support for flight test as needed to support flight operations

EDUCATION AND EXPERIENCE REQUIREMENTS
Bachelor’s degree in Engineering, aviation sciences, quality systems or related technical field; or an equivalent combination of education and experience to successfully perform the essential functions of the job. Two (2) years quality assurance/control, manufacturing operations and/or military operations experience is required. Aerospace industry experience preferred.

POSITION PURPOSE
A Quality Assurance Engineer II develops and maintains optimum methods of controlling quality and/or reliability of product or service in assigned areas such as: statistical methods, tooling and gaging, inspection methods, and program planning. Responsible for providing technical support in the conduct of investigations on known Quality issues. Implements plans and instructions in support of departmental policies. The QAE will work to determine Root cause and corrective action for known Quality issues using the 8D methodology and validated by the audit group. Ensures compliance with all applicable regulations and develops and promotes a good working relationship with local regulatory authorities. Ensures a safe, conforming and quality product is delivered to our customers.

PRINCIPAL DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Develop quality control methods required for the product or service of the area.
2. Prepare department procedures and instructions as required to implement quality control requirements.
3. Review Test and Assembly Documentation. Review new and revised Blue Prints.
4. Recommend revision or modification of systems necessary to maintain or improve quality and/or reliability.
5. Evaluate new quality control methods and techniques for application to current production and future planning and recommend actions.
6. Analyze inspection methods, techniques, equipment, forms, systems, records, reports, and procedures as they affect control of product quality and reliability, and approve or recommend revision.
7. Perform miscellaneous special assignment assigned by group leader or supervisor.
8. Write and review both internal and external Corrective Actions.
9. Follow-up on Corrective Action implementation.
10. Participate in and lead audits and improvement workshops.
11. Assure that the investigations on Quality issues are conducted according to department procedures and work instructions.
12. Actively identify and complete process improvement projects related to achieving improved quality or efficiency of Quality processes.
13. Maintain a high level of customer satisfaction (internal and external customers).
14. Work with other departments and/or disciplines.
15. Execute company policies and procedures; develop new procedures as required.
16. Promote and encourage a continuous improvement culture.

ADDITIONAL FUNCTIONS
1. Work with other departments and/or disciplines.
2. Execute company policies and procedures; develops new procedures as required.
3. Support the operating priorities as identified by the Quality leadership team.
4. Perform other duties as assigned.

OTHER REQUIREMENTS
1. An Airframe & Powerplant (A&P) may be used with 4 years of related experience (in addition to the experience requirements below) in lieu of the degree requirement.
2. An ASQ certification (CQE) and/or experience as a FAA recognized airworthiness designee highly preferred.
3. Knowledgeable of Geometric Dimensioning & Tolerance (GD&T) ASME Y14.5.
4. Ability to define problems, collect data, establish facts, and draw valid conclusions.
5. Working knowledge of Statistical tools used for problem resolution.
6. Lean/Six Sigma experience or greenbelt preferred.
7. Knowledge of manufacturing processes (i.e. Assembly, Machining, Special Process, Inspection, etc.).
8. Excellent communication and interpersonal skills required.
9. Proficient computer skills.
 
Job Number: 17-801-117825
Job Location: Southeast
Rate: OPEN
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 01/08/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Assurance Engineer II

Description:
*Develop quality control methods required for the product or service of the area.
*Prepare department procedures and instructions as required to implement quality control requirements.
*Review Test and Assembly Documentation. Review new and revised Blue Prints.
*Recommend revision or modification of systems necessary to maintain or improve quality and/or reliability
*Evaluate new quality control methods and techniques for application to current production and future planning and recommend actions.
*Analyze inspection methods, techniques, equipment, forms, systems, records, reports, and procedures as they affect control of product quality and reliability, and approve or recommend revision.
*Perform miscellaneous special assignment assigned by group leader or supervisor.
*Write and review both internal and external Corrective Actions.
*Follow-up on Corrective Action implementation.
*Participate in and lead audits and improvement workshops.
*Assure that the investigations on Quality issues are conducted according to department procedures and work instructions.
*Actively identify and complete process improvement projects related to achieving improved quality or efficiency of Quality processes.

Requirements:
*Bachelors degree in Engineering, aviation sciences, quality systems or related technical field; or an equivalent combination of education and experience to successfully perform the essential functions of the job.
*2 years quality assurance/control, manufacturing operations and/or military operations experience is required.
*An Airframe & Powerplant (A&P) may be used with 4 years of related experience (in addition to the experience requirements below) in lieu of the degree requirement.
*Knowledge of manufacturing processes (i.e. Assembly, Machining, Special Process, Inspection, etc.).
*Excellent communication and interpersonal skills required.
*Proficient computer skills.
*Knowledgeable of Geometric Dimensioning & Tolerance (GD&T) ASME Y14.5.
*Ability to define problems, collect data, establish facts, and draw valid conclusions.
*Working knowledge of Statistical tools used for problem resolution.
*An ASQ certification (CQE) and/or experience as a FAA recognized airworthiness designee highly preferred.
*Lean/Six Sigma experience or greenbelt preferred.
*Aerospace industry experience preferred.

Benefits:
Global contractors can take advantage of a number of voluntary customizable and flexible benefit programs available.
Programs
• Medical
• Dental Insurance
• Vision Insurance
• Short-Term Disability Insurance
• Whole Life Insurance
• Accident Insurance
• Critical Illness
• AFLAC – Select Products

Find out more by visiting the benefits page on this website.
Use the following link:
http://www.teamglobal.com/benefits.html
 
Job Number: 127006
Job Location: Savannah, GA
Input Date: 11/29/2017
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: GCP Recruiter
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Assurance Engineer II

Description:
Location: Savannah, GA
Rate: $55.00/HR
Duration: Long Term Contract (1 – 4 years)


Unique Skills:
Proficient with Catia, Smarteam, and Solumina preferable

Education and Experience Requirements:
Bachelor’s degree in Engineering, aviation sciences, quality systems or related technical field; or an equivalent combination of education and experience to successfully perform the essential functions of the job. Two (2) years quality assurance/control, manufacturing operations and/or military operations experience is required. Aerospace industry experience preferred.

Position Purpose:
A Quality Assurance Engineer II develops and maintains optimum methods of controlling quality and/or reliability of product or service in assigned areas such as: statistical methods, tooling and gaging, inspection methods, and program planning. Responsible for providing technical support in the conduct of investigations on known Quality issues. Implements plans and instructions in support of departmental policies. The QAE will work to determine Root cause and corrective action for known Quality issues using the 8D methodology and validated by the audit group. Ensures compliance with all applicable regulations and develops and promotes a good working relationship with local regulatory authorities. Ensures a safe, conforming and quality product is delivered to our customers.

Principal Duties and Responsibilities:
Essential Functions: 1. Develop quality control methods required for the product or service of the area. 2. Prepare department procedures and instructions as required to implement quality control requirements. 3. Review Test and Assembly Documentation. Review new and revised Blue Prints. 4. Recommend revision or modification of systems necessary to maintain or improve quality and/or reliability. 5. Evaluate new quality control methods and techniques for application to current production and future planning and recommend actions. 6. Analyze inspection methods, techniques, equipment, forms, systems, records, reports, and procedures as they affect control of product quality and reliability, and approve or recommend revision. 7. Perform miscellaneous special assignment assigned by group leader or supervisor. 8. Write and review both internal and external Corrective Actions. 9. Follow-up on Corrective Action implementation. 10. Participate in and lead audits and improvement workshops. 11. Assure that the investigations on Quality issues are conducted according to department procedures and work instructions. 12. Actively identify and complete process improvement projects related to achieving improved quality or efficiency of Quality processes. 13. Maintain a high level of customer satisfaction (internal and external customers). 14. Work with other departments and/or disciplines. 15. Execute company policies and procedures; develop new procedures as required. 16. Promote and encourage a continuous improvement culture.

Additional Functions: 1. Work with other departments and/or disciplines. 2. Execute company policies and procedures; develops new procedures as required. 3. Support the operating priorities as identified by the Quality leadership team. 4. Perform other duties as assigned.

Other Requirements: 1. An Airframe & Powerplant (A&P) may be used with 4 years of related experience (in addition to the experience requirements below) in lieu of the degree requirement. 2. An ASQ certification (CQE) and/or experience as a FAA recognized airworthiness designee highly preferred. 3. Knowledgeable of Geometric Dimensioning & Tolerance (GD&T) ASME Y14.5. 4. Ability to define problems, collect data, establish facts, and draw valid conclusions. 5. Working knowledge of Statistical tools used for problem resolution. 6. Lean/Six Sigma experience or greenbelt preferred. 7. Knowledge of manufacturing processes (i.e. Assembly, Machining, Special Process, Inspection, etc.). 8. Excellent communication and interpersonal skills required. 9. Proficient computer skills.
 
Job Number: 8306
Job Location: Savannah, GA
Rate: $55.00/HR
Per Diem: Possible
Overtime: Possible
Duration: LT
Input Date: 12/19/2017
Last Updated: 01/17/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Assurance Engineer II

Description:
Quality Assurance Engineer II

Location: Savannah, GA
Rate: $55.00/HR
Duration: Long Term Contract (1 – 4 years)


Unique Skills:
Position will be located in Flight Test area. Experienced in providing support for issues related to Flight Test operations by partnering with all relative stakeholders such as engineering, procurement, and FT operations is highly preferred. Must be able to liaison with aircraft QC, MRB and supplier to ensure all repair documentation is submitted in a timely manner. Required to be proficient in Solumina, including experience reviewing provided documentation prior to sending to MRB engineering for review. Current GAC Quality MRB authority a plus. Must be able to coordinate with applicable groups for Flight Test parts returned to vendor for repair/modification. Will provide ancillary support for flight test as needed to support flight operations

Education and Experience Requirements:
Bachelors degree in Engineering, aviation sciences, quality systems or related technical field; or an equivalent combination of education and experience to successfully perform the essential functions of the job. Two (2) years quality assurance/control, manufacturing operations and/or military operations experience is required. Aerospace industry experience preferred.

Position Purpose:
A Quality Assurance Engineer II develops and maintains optimum methods of controlling quality and/or reliability of product or service in assigned areas such as: statistical methods, tooling and gaging, inspection methods, and program planning. Responsible for providing technical support in the conduct of investigations on known Quality issues. Implements plans and instructions in support of departmental policies. The QAE will work to determine Root cause and corrective action for known Quality issues using the 8D methodology and validated by the audit group. Ensures compliance with all applicable regulations and develops and promotes a good working relationship with local regulatory authorities. Ensures a safe, conforming and quality product is delivered to our customers.

Principal Duties and Responsibilities:

Essential Functions: 1. Develop quality control methods required for the product or service of the area. 2. Prepare department procedures and instructions as required to implement quality control requirements. 3. Review Test and Assembly Documentation. Review new and revised Blue Prints. 4. Recommend revision or modification of systems necessary to maintain or improve quality and/or reliability. 5. Evaluate new quality control methods and techniques for application to current production and future planning and recommend actions. 6. Analyze inspection methods, techniques, equipment, forms, systems, records, reports, and procedures as they affect control of product quality and reliability, and approve or recommend revision. 7. Perform miscellaneous special assignment assigned by group leader or supervisor. 8. Write and review both internal and external Corrective Actions. 9. Follow-up on Corrective Action implementation. 10. Participate in and lead audits and improvement workshops. 11. Assure that the investigations on Quality issues are conducted according to department procedures and work instructions. 12. Actively identify and complete process improvement projects related to achieving improved quality or efficiency of Quality processes. 13. Maintain a high level of customer satisfaction (internal and external customers). 14. Work with other departments and/or disciplines. 15. Execute company policies and procedures; develop new procedures as required. 16. Promote and encourage a continuous improvement culture.

Additional Functions: 1. Work with other departments and/or disciplines. 2. Execute company policies and procedures; develops new procedures as required. 3. Support the operating priorities as identified by the Quality leadership team. 4. Perform other duties as assigned.

Other Requirements: 1. An Airframe & Powerplant (A&P) may be used with 4 years of related experience (in addition to the experience requirements below) in lieu of the degree requirement. 2. An ASQ certification (CQE) and/or experience as a FAA recognized airworthiness designee highly preferred. 3. Knowledgeable of Geometric Dimensioning & Tolerance (GD&T) ASME Y14.5. 4. Ability to define problems, collect data, establish facts, and draw valid conclusions. 5. Working knowledge of Statistical tools used for problem resolution. 6. Lean/Six Sigma experience or greenbelt preferred. 7. Knowledge of manufacturing processes (i.e. Assembly, Machining, Special Process, Inspection, etc.). 8. Excellent communication and interpersonal skills required. 9. Proficient computer skills.
 
Job Number: 8305
Job Location: Savannah, GA
Rate: $55.00/HR
Per Diem: Possible
Overtime: Possible
Duration: LT
Input Date: 11/21/2017
Last Updated: 01/17/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Assurance Specialist Engineer

Description:
Quality Assurance Specialist Engineer

Canoga Park, CA
1 Year Contract
$50.00-54.00/Hr

1st Shift

Duties:

***Be available for 50% to 75% travel to White Sands Test Facility in New Mexico to support rocket engine testing for a week (or more) at a time***

** Candidates must be U.S. Citizens **



** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


** Dual Citizens or candidates with a current non-U.S. passport in addition to a U.S. passport are not eligible **


Candidate needs to be familiar with the following processes:

-Nonconformance generation and closure process

-Cause and corrective action process

-A general understanding of machining, blueprints, measurement tools and build records, GD&T

-A general understanding of what quality engineering does

This individual will provide Quality Engineering support to the assigned product team spanning the life cycle of the program; including design, development, production, test, and supplier support. An understanding of engineering drawings, specifications, and typical aerospace product assurance processes (dimensional inspection, NDT, source/receiving inspection, etc) is required.

Essential Job Functions

15% - Utilizes engineering background and expertise to communicate quality requirements to product team members, in-house inspection personnel, and suppliers. Communicates quality issues to program and process management.


20% - Reviews engineering drawings for inspectability. Works with inspection process experts to develop special inspection techniques where necessary. Assures that fabrication and inspection requirements defined in engineering drawings/specifications are appropriate for the design and comply with customer and company quality requirements.


15% - Participates in design reviews with customers. Presents the product inspection plan describing how hardware acceptance processes will assure compliance with design, customer, and company requirements.


20% - Provides a clear and concise flow down of product definition and quality requirements to suppliers. Works closely with Supply Management and Supplier Quality to coordinate/resolve supplier issues.


15% Reviews product nonconformances. Assure adequate nonconformance description and appropriate disposition. Handles and communicates deviations/nonconformances at different levels within the organization. Interfaces with the Material Review Board (MRB) to describe impact of nonconformance (schedule, cost, performance, etc.) and explain technical justification for the hardware disposition.


10% - Drives corrective and preventative action activity both in-house and at the supplier, and provides corrective action board support to manage timely and effective problem closure and recurrence control.


5% - Prepares comprehensive analyses, procedures, reports and presentations for both internal and external customers.

Skills:

Effective verbal and written communication skills.
Strong interpersonal skills and ability to work within a close-knit team environment.
Valid driver’s license.

Education:
Bachelor’s degree in appropriate discipline and 9 years of directly related experience, or an equivalent combination of education and experience.
 
Job Number: 7964
Job Location: Canoga Park, CA
Rate: $50.00-54.00/Hr
Per Diem: Possible Split
Overtime: Possible
Duration: 3 Mos
Start Date: ASAP
Input Date: 09/26/2017
Last Updated: 12/20/2017
Firm Name: INCONEN CORPORATION
Attention: Brad
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Assurance Specialist Engineer

Description:
Quality Assurance Specialist Engineer

Canoga Park, CA
1 Year Contract
$50.00-54.00/Hr

1st Shift

Duties:
** Candidates must be U.S. Citizens **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

** Dual Citizens or candidates with a current non-U.S. passport in addition to a U.S. passport are not eligible **

This individual will provide Quality Engineering support to the assigned product team spanning the life cycle of the program; including design, development, production, test, and supplier support. An understanding of engineering drawings, specifications, and typical aerospace product assurance processes (dimensional inspection, NDT, source/receiving inspection, etc) is required.

Essential Job Functions

15% - Utilizes engineering background and expertise to communicate quality requirements to product team members, in-house inspection personnel, and suppliers. Communicates quality issues to program and process management.

20% - Reviews engineering drawings for inspectability. Works with inspection process experts to develop special inspection techniques where necessary. Assures that fabrication and inspection requirements defined in engineering drawings/specifications are appropriate for the design and comply with customer and company quality requirements.

15% - Participates in design reviews with customers. Presents the product inspection plan describing how hardware acceptance processes will assure compliance with design, customer, and company requirements.

20% - Provides a clear and concise flow down of product definition and quality requirements to suppliers. Works closely with Supply Management and Supplier Quality to coordinate/resolve supplier issues.

15% Reviews product nonconformances. Assure adequate nonconformance description and appropriate disposition. Handles and communicates deviations/nonconformances at different levels within the organization. Interfaces with the Material Review Board (MRB) to describe impact of nonconformance (schedule, cost, performance, etc.) and explain technical justification for the hardware disposition.

10% - Drives corrective and preventative action activity both in-house and at the supplier, and provides corrective action board support to manage timely and effective problem closure and recurrence control.

5% - Prepares comprehensive analyses, procedures, reports and presentations for both internal and external customers.

Skills:
Effective verbal and written communication skills.
Strong interpersonal skills and ability to work within a close-knit team environment.
Valid driver’s license.

Education:
Bachelor’s degree in appropriate discipline and 9 years of directly related experience, or an equivalent combination of education and experience.
 
Job Number: 7880
Job Location: Canoga Park, CA
Rate: 50.00-54.00/Hr
Per Diem: Possible Split
Overtime: Possible
Duration: 1 Year
Start Date: ASAP
Input Date: 09/11/2017
Last Updated: 12/12/2017
Firm Name: INCONEN CORPORATION
Attention: Brad
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Assurance Specialist Engineer CA

Description:
160416/7450276
Job Title: Quality Assurance Specialist Engineer
Rate: 53/hr
Number of Positions: 2
Remaining Positions: 2
Duties: ** Candidates must be U.S. Citizens **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

** Dual Citizens or candidates with a current non-U.S. passport in addition to a U.S. passport are not eligible **


Candidate needs to be familiar with the following processes:

-Nonconformance generation and closure process
-Cause and corrective action process
-A general understanding of machining, blueprints, measurement tools and build records, GD&T
-A general understanding of what quality engineering does
-Be available for 50% to 75% travel to White Sands Test Facility in New Mexico to support rocket engine testing for a week (or more) at a time


This individual will provide Quality Engineering support to the assigned product team spanning the life cycle of the program; including design, development, production, test, and supplier support. An understanding of engineering drawings, specifications, and typical aerospace product assurance processes (dimensional inspection, NDT, source/receiving inspection, etc) is required.

Essential Job Functions
15% - Utilizes engineering background and expertise to communicate quality requirements to product team members, in-house inspection personnel, and suppliers. Communicates quality issues to program and process management.

20% - Reviews engineering drawings for inspectability. Works with inspection process experts to develop special inspection techniques where necessary. Assures that fabrication and inspection requirements defined in engineering drawings/specifications are appropriate for the design and comply with customer and company quality requirements.

15% - Participates in design reviews with customers. Presents the product inspection plan describing how hardware acceptance processes will assure compliance with design, customer, and company requirements.

20% - Provides a clear and concise flow down of product definition and quality requirements to suppliers. Works closely with Supply Management and Supplier Quality to coordinate/resolve supplier issues.

15% Reviews product nonconformances. Assure adequate nonconformance description and appropriate disposition. Handles and communicates deviations/nonconformances at different levels within the organization. Interfaces with the Material Review Board (MRB) to describe impact of nonconformance (schedule, cost, performance, etc.) and explain technical justification for the hardware disposition.

10% - Drives corrective and preventative action activity both in-house and at the supplier, and provides corrective action board support to manage timely and effective problem closure and recurrence control.

5% - Prepares comprehensive analyses, procedures, reports and presentations for both internal and external customers.
Skills: • Effective verbal and written communication skills.
• Strong interpersonal skills and ability to work within a close-knit team environment.
• Valid driver’s license.
Education: Bachelor’s degree in appropriate discipline and 9 years of directly related experience, or an equivalent combination of education and experience.


Skills: Required
• QUALITY ENGINEER
• AEROSPACE
• CORRECTIVE ACTION

State/Province: California
City/Town: Canoga Park


Start Date: 10/23/2017 Hours Per Week: 40.00
Est. End Date: 01/31/2018 Hours Per Day: 8.00
Schedule Notes: 50% to 75% travel to White Sands in New Mexico. Days Per Week: 5.00
 
Job Number: MB-7450276
Job Location: Canoga Park, CA
Rate: 53/hr max
Duration: 3 months +
Input Date: 11/20/2017
Last Updated: 12/19/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Engineer 2

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Quality Engineer 2
(U.S. Citizenship Required*)
Huntsville, AL
2017-5054

Responsibilities:
• Integrates contractual and company Quality Management System requirements into all aspects of proposals and program processes and documentation.
o Develops quality metrics, design and production certification plans to ensure compliance with contractual, Company and regulatory requirements.
o Conducts capability assessments and process validations to support supplier selection activities.
o Participates in various reviews to ensure quality attributes are incorporated into product designs. Performs analysis and process audits to ensure manufacturing and test readiness.
o Provides material review dispositions for non-conformances.
o Analyzes non-conformance trends to evaluate effectiveness of corrective actions.
o Performs benchmarking and other forms of analysis to ensure specified processes capability levels are achieved.
• Researches contractual and company Quality Management System requirements for applicability to specific proposals and program processes and documentation.
• Develops sections of quality metrics, design and production certification plans to ensure compliance with contractual, Company and regulatory requirements.
• Analyzes capability assessments to support supplier selection activities.
• Participates in various reviews to ensure quality attributes are incorporated into product designs.
• Performs data analysis to ensure manufacturing and test readiness.
• Provides material review dispositions for non-conformances.
• Analyzes non-conformance trends to evaluate effectiveness of corrective actions.
• Compiles performance reports and other statistical data to ensure specified processes capability levels are achieved. Works under general supervision.

Qualification:
• Required – Active Secret Clearance
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor's degree and typically 2 or more years' experience in an engineering classification or a Master's degree with experience in an engineering classification.
• Degree must be from an ABET accredited course of study, in engineering or related

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!



APPLY ONLINE HERE: https://careers-moseleytechnical.icims.com/jobs/5054/quality-engineer-2/job?mode=view
 
Job Number: 2017-5054
Job Location: Huntsville, AL
Duration: 12 Months
Input Date: 12/01/2017
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: https://careers-moseleytechnical.icims.com/jobs/5054/quality-engineer-2/job?mode=view
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Engineer II

Description:
Position Purpose:
• Develops and maintains optimum methods of controlling quality and/or reliability of product or service in assigned areas such as: statistical methods, tooling and gaging, inspection methods, and program planning.
• Responsible for providing technical support in the conduct of investigations on known Quality issues. Implements plans and instructions in support of departmental policies.
• The QAE will work to determine Root cause and corrective action for known Quality issues using the 8D methodology and validated by the audit group.
• Ensures compliance with all applicable regulations and develops and promotes a good working relationship with local regulatory authorities.
• Ensures a safe, conforming and quality product is delivered to our customers.

Unique Skills:
• Proficient with Catia, SmarTeam and Solumina preferable

Education and Experience Requirements:
• Bachelor’s degree in Engineering, aviation sciences, quality systems or related technical field; or an equivalent combination of education and experience to successfully perform the essential functions of the job. Two (2) years quality assurance/control, manufacturing operations and/or military operations experience is required. Aerospace industry experience preferred.

Principal Duties and Responsibilities:
• Develop quality control methods required for the product or service of the area.
• Prepare department procedures and instructions as required to implement quality control requirements.
• Review Test and Assembly Documentation. Review new and revised Blue Prints.
• Recommend revision or modification of systems necessary to maintain or improve quality and reliability.
• Evaluate new quality control methods and techniques for application to current production and future planning and recommend actions.
• Analyze inspection methods, techniques, equipment, forms, systems, records, reports, and procedures as they affect control of product quality and reliability, and approve or recommend revision.
• Perform miscellaneous special assignment assigned by group leader or supervisor.
• Write and review both internal and external Corrective Actions.
• Follow-up on Corrective Action implementation.
• Participate in and lead audits and improvement workshops.
• Assure that the investigations on Quality issues are conducted according to department procedures and work instructions.
• Actively identify and complete process improvement projects related to achieving improved quality or efficiency of Quality processes.
• Maintain a high level of customer satisfaction (internal and external customers).
• Work with other departments and/or disciplines.
• Execute company policies and procedures; develop new procedures as required.
• Promote and encourage a continuous improvement culture.

Other Requirements:
• An Airframe & Powerplant (A&P) may be used with 4 years of related experience (in addition to the experience requirements below) in lieu of the degree requirement.
• An ASQ certification (CQE) and/or experience as a FAA recognized airworthiness designee
• Knowledgeable of Geometric Dimensioning & Tolerance (GD&T) ASME Y14.5.
• Ability to define problems, collect data, establish facts, and draw valid conclusions.
• Working knowledge of Statistical tools used for problem resolution.
• Lean/Six Sigma experience or greenbelt preferred.
 
Job Number: 24-218
Job Location: Savannah, GA
Rate: $55
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 11/21/2017
Last Updated: 02/06/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Engineer II

Description:
Position Purpose:
• A Quality Assurance Engineer II develops and maintains optimum methods of controlling quality and/or reliability of product or service in assigned areas such as: statistical methods, tooling and gaging, inspection methods, and program planning.
• Responsible for providing technical support in the conduct of investigations on known Quality issues. Implements plans and instructions in support of departmental policies.
• The QAE will work to determine Root cause and corrective action for known Quality issues using the 8D methodology and validated by the audit group.
• Ensures compliance with all applicable regulations and develops and promotes a good working relationship with local regulatory authorities.
• Ensures a safe, conforming and quality product is delivered to our customers.

Unique Skills:
• Position will be located in Flight Test area Experienced in providing support for issues related to Flight Test operations by partnering with all relative stakeholders such as engineering, procurement, and FT operations is highly preferred.
• Must be able to liaison with aircraft QC, MRB and supplier to ensure all repair documentation is submitted in a timely manner.
• Required to be proficient in Solumina, including experience reviewing provided documentation prior to sending to MRB engineering for review.
• Current Quality MRB authority a plus.
• Must be able to coordinate with applicable groups for Flight Test parts returned to vendor for repair/modification.
• Will provide ancillary support for flight test as needed to support flight operations

Education and Experience Requirements:
• Bachelor’s degree in Engineering, aviation sciences, quality systems or related technical field; or an equivalent combination of education and experience to successfully perform the essential functions of the job.
• Two (2) years quality assurance/control, manufacturing operations and/or military operations experience is required.
• Aerospace industry experience preferred.

Principal Duties and Responsibilities:
• Develop quality control methods required for the product or service of the area.
• Prepare department procedures and instructions as required to implement quality control requirements.
• Review Test and Assembly Documentation.
• Review new and revised Blue Prints.
• Recommend revision or modification of systems necessary to maintain or improve quality and/or reliability.
• Evaluate new quality control methods and techniques for application to current production and future planning and recommend actions.
• Analyze inspection methods, techniques, equipment, forms, systems, records, reports, and procedures as they affect control of product quality and reliability, and approve or recommend revision.
• Perform miscellaneous special assignment assigned by group leader or supervisor.
• Write and review both internal and external Corrective Actions.
• Follow-up on Corrective Action implementation.
• Participate in and lead audits and improvement workshops.
• Assure that the investigations on Quality issues are conducted according to department procedures and work instructions.
• Actively identify and complete process improvement projects related to achieving improved quality or efficiency of Quality processes.
• Maintain a high level of customer satisfaction (internal and external customers).
• Work with other departments and/or disciplines.
• Execute company policies and procedures; develop new procedures as required.
• Promote and encourage a continuous improvement culture.
• Work with other departments and/or disciplines.
• Execute company policies and procedures; develops new procedures as required.
• Support the operating priorities as identified by the Quality leadership team.
• Perform other duties as assigned

Other Requirements:
• An Airframe & Powerplant (A&P) may be used with 4 years of related experience (in addition to the experience requirements below) in lieu of the degree requirement.
• An ASQ certification (CQE) and/or experience as a FAA recognized airworthiness designee highly preferred.
• Knowledgeable of Geometric Dimensioning & Tolerance (GD&T) ASME Y14.5.
• Ability to define problems, collect data, establish facts, and draw valid conclusions.
• Working knowledge of Statistical tools used for problem resolution.
• Lean/Six Sigma experience or greenbelt preferred.
• Knowledge of manufacturing processes (i.e. Assembly, Machining, Special Process, Inspection, etc.).
• Excellent communication and interpersonal skills required.
• Proficient computer skills.
 
Job Number: 24-217
Job Location: Savannah, GA
Rate: $55
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 11/21/2017
Last Updated: 01/11/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Inspector-Aerospace Flight Test

Description:
The Quality inspector inspects the Aircraft and signs a release for flight.

Job Duties and Responsibilities:
• Carry out physical inspections on Flight Test Aircraft to identify damage or defects and to assess airworthiness and conformance to standards.
o Sign the release for flight form on aircrafts that pass Quality Inspection.
o Analyze information and evaluate results to choose the best solution and solve problems.
• Observe and certify conformity with system tests.
• Carry out daily audits related to shop floor practices or specific Quality System elements.
• Prepare and audit Aircraft documentation such as Technical logs.
• Administer non-conformance reports and snag reports.
• Conduct Authority audits with QA organization as needed.
• Perform Nondestructive testing (NDT) as needed.
• Complete special projects and miscellaneous tasks as assigned by manager.

Level Requirements:
Education:
Degree, specification
• College degree or equivalent work experience
• A&P license
Preferred qualifications
• NDT certification

Experience:
• 10 + years of experience in AC release as a Quality Inspector in Experimental Flight Testing or maintenance or pre-flight.
• Experimental experience preferred from other field of experience.
 
Job Location: Moses Lake, WA
Rate: DOE
Per Diem: Split- Possible
Overtime: Yes
Start Date: ASAP
Input Date: 12/28/2017
Last Updated: 01/23/2018
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Information Assurance Engineer

Description:
A Fortune 500 and worldwide leader in business aviation; specializing in Command and Control, Communications Networking, Rugged Computing, Information Assurance and Cyber Defense is searching for the right talent to fill this opportunity:

Senior Information Assurance Engineer
(U.S. Citizenship Required*)
Pittsfield, MA
2017-4987

Responsibilities:
• Perform or lead:
o security requirements analysis, security requirements definition, system security design, security architecture generation, security trade studies, and security verification and validation with little or no supervision
o security planning, cost and risk analyses for the program security activities
o customer security requirements analysis, develop system security requirements and define allocations to lower levels (subsystem, elements and components)
• Contribute to detailed security analyses at the system of system (SOS) level
• Synthesize security solutions within the context of the system to meet customer expectations while staying within schedule and cost constraints
• Research and analyze data such as vendor products, COTS components, GFE/CFE, specifications, and manuals to determine security of design
• Choose appropriate standards, processes, procedures, and tools throughout the system development life cycle to support the generation of the security engineering products
• Execute or lead development of program-required security documentation including security, contingency, and security tests plans/procedures in compliance with IA policy
• Support or lead Assessment and Authorization (A&A) (or Certification and Accreditation (C&A) activities, and generate program documentation
• Test and evaluate security to ensure that requirements have been implemented
• Scan security and analyze scan results
• Assess and mitigate system security threats and risks throughout program life cycle
• Lead:
o technical security tasks for medium teams or projects,
o small security proposals and contributes the security portions of medium sized proposals
o generation of small subcontract Statement of Works (SOWs)
• May supervise or manage lower level employees; may mentor less experienced engineers within the department on IA/cyber

Qualifications:
• Required – Secret clearance.
• Excellent use and understanding of systems engineering concepts, principles, and theories
• Excellent understanding of cyber security
o specifications such as Risk Management Framework (RMF), DIACAP, STIGs and other government security specifications and guidelines
o technology and trends
• Contributes to the achievement of business objectives
• Recognizes and incorporates various security designs and lessons learned
• Strong written and verbal communications skills; able to sell concepts and ideas
• Effective in communicating issues, impacts, and corrective actions as they affect the cyber design and implementation
• Excellent in reporting relevant cyber systems engineering design
• Regular contact with senior levels of security work groups
• Able to lead security work groups
• Contact with project leaders and other professionals within the Engineering department and with project teams
• Frequent contact with the external customers' security professionals
• Excellent understanding of and ability to apply basic project leadership principles including SPI/CPI, Earned Value, Cost Account Management (CAM), and Statistical Process Controls
• Creative thinker, good multi-tasker, works under limited direction
• Excellent understanding of Microsoft Office applications

*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
Bachelor's of Science degree in Engineering, a related specialized area or field is required (or equivalent experience) plus a minimum of 8 years of relevant experience; or Master's degree plus a minimum of 6 years of relevant experience.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!

PLEASE APPLY ONLINE HERE: https://careers-moseleytechnical.icims.com/jobs/4987/sr-adv-info-assurance-eng-3/job?mode=view
 
Job Number: 2017-4987
Job Location: Pittsfield, MA
Duration: 12+ Months
Input Date: 12/05/2017
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Aaron Burrows
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sensor Integration Hardware Engineer

Description:
Be a part of a fortune 500 Combat Systems group and a global leader in the design, development, production, support and enhancement of tracked and wheeled military vehicles. Our client has a 70 year defense heritage of providing a full spectrum of high quality, technically superior, high value products and services to the United States and its Allies. Their employees are dedicated to making the Company the World’s preferred supplier of land vehicles and weapons systems.

If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

Sensor Integration Hardware Engineer
(U.S. Citizenship Required*)
Sterling Heights, MI
2017-5033
Responsibilities:
The Sensor Integration Hardware Engineer position is responsible for electronics design, implementation, test, and support of new sensor-based components & subsystems.
• Support concept to production H/W including requirements analysis, design, debug, test, a