Job Search Results

545 listings were found that matched your search words: Keywords: Aerospace ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2018/01/23 Tuesday 06:04PM Pacific Time by ContractJobHunter. )

Listings 1 - 545

Go To My Job Tracker

Expand all descriptions

2175 - STRESS ENGINEER - resume - word doc. only

Description:
Stress analysis in support to Non Conformity Reports (NCR) raised during production by working closely with production and liaison engineering.

Preliminary and detailed sizing.

Stress analyses to ensure requirements (static, fatigue, damage tolerance, weights, customers) are met.

Validation of engineering drawings and IPDT support.

Preparation of certification reports and support to entry-into-service.

Have a University mechanical or civil or aerospace engineering degree with a minimum of 5 years relevant experience.

Experience should include at least one of the following skills in the structural integrity qualification (loads, static, fatigue, and damage tolerance) of airplane components.

MRB Structures Stress on Client aircrafts is an asset.

Knowledge of CATIA, finite element modeling/analysis, and Nasgro is an asset. General computer skills are essential.

Must be a self-motivated person, a team player able to work under pressure and under a minimum of supervision.

Must be able to read and write in English and have good communication skills.

Being completely bilingual (French and English) is an asset.
 
Job Number: 2175
Job Location: Montreal, Canada
Rate: 60.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 01/17/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Email: tdm@tdm.ca
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2210 - INDUSTRIAL ENGINEER - cv. word doc only

Description:
Design, balance and updating of follow-up charts of production work.

Draw the diagram of prior artwork, and identify the critical path for each position in a lean manufacturing mindset.

Establish and monitor the progress of off-position work plans in Toronto for the Global 7k / 8k cockpit.

Participate in the development of tempo change scenarios;

Calculate manpower requirements.

Perform time measurement (observation and or time studies).

Participate in the identification of bottlenecks and complete capacity calculations.

Participate in harmonization of changes and their implementation.

Achieve different levels: technical manuals, classifications and approvals solid models and assemblies.

Analyze and verify CATIA 3D models.

Identify sources of waste in the process and propose solutions for improvement.

Monitor and follow the action plans needed to reduce production hours.

Have A College diploma or bachelor%u2019s degree in Industrial Engineering, Mechanical engineering or equivalent

Have a minimum 8 manufacturing experience

Technical knowledge in manufacturing, aerospace structure or aircraft interior finishing is an asset

Have the knowledge of the lean manufacturing principles and the use of visual stream mapping (VSM)

Master the computer software design CATIA V5

Master CAD database such ENOVIA and VPM Nav.

Master Microsoft Excel.

Possess strong problem solving skills.

Possess strong abilities in adaptability, flexibility and team player.

Bilingual - master both French and English

Are available to travel to Toronto if needed.
 
Job Number: 2210
Job Location: Montreal, Canada
Rate: 54.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 24 Mths
Start Date: ASAP
Input Date: 12/08/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

2228 - AVIONICS SYSTEMS INTEGRATOR - resume - word doc only

Description:
Responsible, as an Avionics Systems Integrator Specialist, to perform various tasks related to the development, qualification, certification and in-service support of Avionics systems on Challenger aircrafts.

Responsible for supporting investigation for in service and manufacturing issues and performing root cause analysis of Avionics systems.

Participate and define Avionics Systems architecture design to meet Aircraft Design Requirements and Objectives.

Support the Flight Test Center in development and certification tests; witnessing of tests may be required.

Support the Final Assembly Line and In Service Aircraft for any development issues.

Manage, review and approve the deliverables of the Avionics System Suppliers.

Work with other functions & disciplines of the Challenger program to provide required information and also to collect required data to allow the Avionics design, development & certification effort to progress.

Support other departments such as Production, Customer Support, Program Office and Product Planning.

Participate in meetings and design reviews with Avionics System Suppliers and certification authorities.

Be able to travel is a must.


University degree in Electrical, Electronics, Software, Aerospace Engineering or equivalent.

Must have at least eight (8) years of relevant experience with the design, development, integration and certification of Avionics systems.

Have a good knowledge with the specification, design, integration, test and certification of Avionics systems on aircraft.

Good knowledge of RTCA documents DO-178 and DO-160.

Good knowledge of part FAR25/525 certification process and with the ARP4754 standard.

Experience with civil aircraft and airworthiness authorities.

Systems: Datalink, Flight Management System and Display integration.

Proficient with the use of Microsoft Office software tools to produce presentation and reports.

Ability to work well in a team environment.

Strong communication skills (written and spoken).
 
Job Number: 2228
Job Location: Montreal, Canada
Rate: 64.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 01/17/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Email: tdm@tdm.ca
Website: www.tdm.ca

2231 - ELECTRICAL HARNESS DESIGNER - resume - word doc only

Description:
Produce and deliver Harness Data Reports based on Digital Mock-up and Mentor Graphics.

Integrate the design of the wire harnesses.

Incorporate changes (RFC, PCR) on the harness data reports.

Contribute to the team effort by meeting the team%u2019s objectives for productivity and quality.

Contribute to other relevant tasks needed to support the team%u2019s objectives.

Have a University degree in aircraft avionics or electrical engineering or equivalent work experience in wiring integration.

Have experience with harness manufacturing or methods.

Have a minimum of 5 years of relevant working experience in aerospace.

Have wiring design, wiring installation and/or wiring troubleshooting experience.

Mentor Graphics Harness XC tool knowledge is the primary requirement.

Also have experience with Catia V5.

Have a strong sense of responsibility and have good organization skills.

Must have excellent communication skills including the ability to read/write in English.

Are comfortable working with MS office suite.

Are familiar with BM%u2019s, RAE documents and BAPS related to harnesses.

Communicate clearly and openly with your team.

Embrace changes and new ideas.

Are persistent to reach your goals.

Seek out and accept feedback.
 
Job Number: 2231
Job Location: Montreal, Canada
Rate: 61.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 01/17/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Email: tdm@tdm.ca
Website: www.tdm.ca

2272 - MATERIALS & PROCESSES - COMPLETIONS - cv, word doc only

Description:
Support the Engineering, Production and Quality organizations;

Assess various metallic, composite and completion finishing materials (Wood Veneer, Fabric, Leather, etc.);

Engage in engineering development work;

Sign engineering drawings and documentations;

Prepare Test Plans and approve Test Reports (including flammability);

Perform Trade and Design Studies;

Support various research and development projects;

Act as M&P expert;

Create, improve and adapt technical and functional processes;

Take on strategic projects management;

Plan, execute audits, prepare reports and follow up on corrective actions;

Analyze process and systems changes.

University degree in metallurgical, chemical or materials engineering with at least 3 years of pertinent experience (relevant experience in aerospace field is an asset)

Familiar with the materials used in aerospace industry and the manufacturing and application procedures.

Familiar with the typical military standards or the aerospace industry standards (e.g.: MIL, SAE specifications, FAA requirements, etc).

Knowledge of the aluminum, composite and aircraft completion finishing materials characteristics as well as their treatment.

Practical knowledge and experience of Catia/Enovia V5.

Work under minimum supervision to perform a wide range of technical functions.

Practical knowledge and experience in aircraft structure and completion components.

Customer-oriented with innovative problem solving skills and you are organized.

Good communication skills including good English and French writing and verbal skills.

Are a team player, working in a multidisciplinary team.

Good command of various software (MS Suite, Outlook, Acrobat, etc.).
 
Job Number: 2272
Job Location: Montreal, Canada
Rate: 56.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 01/17/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Email: tdm@tdm.ca
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2281 - TEST & CERTIFICATION PROJECT ENGINEER

Description:
Create, harmonize and ensuring schedule compliance in support of successful project accomplishment

Ensure proper working link between BA, BFTC, and other work packages.

Coordinate and track to ensure major Supplier/BA deliverables are available on schedule

Create, harmonize and track compliance to various schedules required to manage the project

Coordinate snag disposition between Avionics supplier and WP's through FRACAS tool

Track and status the release of Certification Documents, drawings and Test Definition Sheets

Solve problems in a timely fashion and with a high level of quality.

Design and produce proper visibility packages and governance (IPDT, KPIs, status presentation, DMM material, internal reviews, follow up of escalations). Presentation material to upper Management as required.

Manage priorities, and communicate and harmonize these priorities

Coordinate multi-site activities as necessary

Support Budget preparation and provide associated visibility (Budget vs Spend etc)

Actively support the Achieving Excellence (AE) departmental objectives

Represent Engineering & Product Development at various inter-departmental meetings· Create, harmonize and ensuring schedule compliance in support of successful project accomplishment

Ensure proper working link between BA, BFTC, and other work packages.

Coordinate and track to ensure major Supplier/BA deliverables are available on schedule

Create, harmonize and track compliance to various schedules required to manage the project

Coordinate snag disposition between Avionics supplier and WP's through FRACAS tool

Track and status the release of Certification Documents, drawings and Test Definition Sheets

Solve problems in a timely fashion and with a high level of quality.

Design and produce proper visibility packages and governance (IPDT, KPIs, status presentation, DMM material, internal reviews, follow up of escalations). Presentation material to upper Management as required.

Manage priorities, and communicate and harmonize these priorities

Coordinate multi-site activities as necessary

Support Budget preparation and provide associated visibility (Budget vs Spend etc)

Actively support the Achieving Excellence (AE) departmental objectives

Represent Engineering & Product Development at various inter-departmental meetings


Engineering degree/diploma or equivalent working experience, with 5 years+ experience in aerospace testing area (essential)

Familiar with testing environment and processes

Familiar with Program/Project Management.

Familiar with BA environment and processes (an asset)

Professional attitude and superior communication skills (essential).

Excellent organizational, time management skills, foresight, accuracy, attention to detail and commitment to objectives and responsibilities.

Pro-active attitude and an ability to manage multiple priorities.

Self-motivated, autonomous and enthusiastic.

Ability to work willingly and independently in a fast paced, challenging environment.

Effective problem solving skills with ability to make good decisions to move projects along to meet or exceed the targets.

Good computing skills;

Proficient in MS Office and have experience with MS Access/Project.

Some travel will be required
 
Job Number: 2281
Job Location: Montreal, Canada
Rate: 55.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 12/08/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

2299 - FLAMMABILITY ANALYST - cv. word doc only

Description:
Analyze engineering drawings (2D and 3D) in order to establish the configurations to be tested

Prepare test plans and compile tests results in technical reports

Witness flammability tests in the department lab

Understand and apply airworthiness flammability standards of Transport Canada, FAA and EASA, particularly FAR 25.853

Provide flammability expertise to engineering teams and other departments of the Global Completion Center

Solve technical problems related to flammability of the Global business jet interiors

Support the production unit of the Global Completion Center Flammability team

DEC or university degree in mechanical engineering or aerospace

Experience in engineering or aircraft interiors

Ability to analyze engineering drawings

Good knowledge of Office tools (Excel, Access, Word)

A team player and you have capacity to work under pressure

Have Problem solving skills

Excellent communication skills (French & English)

Knowledge of the Federal Aviation Regulations (FAR), more specifically FAR 25.853, an asset

Experience with CATIA V5, an asset
 
Job Number: 2299
Job Location: Montreal, Canada
Rate: 60.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 01/17/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Email: tdm@tdm.ca
Website: www.tdm.ca

2303 - PROPULSION SYSTEMS ENGINEER - cv, word doc only

Description:
Coordinate product development activities between the supplier of the system and the affected work packages.

Ensure successful design, validation, certification and delivery of the system.

Ensure successful completion of each development phase deliverables (may author, review, approve).

Problem solve the technical issues in a cross functional environment.

Duties include:

Design and integration of the system;

Review of design and documentation of all the aspects related to your system;

Checking for quality of the Supplier's analyses;

Validation and verification of system requirements;

Validation and verification of system performance through design reviews, analyses, rig and aircraft testing;

Definition, preparation and execution of qualification and certification tests;

Working with supplier in the investigation and resolution of test findings;

Preparation or review of qualification or certification reports;

Working with suppliers to establish complete system requirements and system interfaces;

Liaison with stress, loads, reliability, maintainability and safety (RM&S), simulation, customer and operations support departments;

Identify issues and obstacles, follow-up and communicate progress;

Prepare reports or presentations.

Bachelor or Master's (preferred) degree in Mechanical or Aerospace Engineering with a relevant experience of a minimum of 5 to 8 years.

Must have a good knowledge of propulsion systems and their integration on the aircraft.

Have a background in design, integration, development and certification of Propulsion Systems.

Cognizant of the relevant Airworthiness Regulations and certification process.

Have knowledge of MS Office software (essential).

Familiar with Part 25 Regulations and certification requirements.

Flight testing/testing experience an asset.

Good oral and technical writing skills in English (required) and knowledge of French is an asset.

Motivated, self-starter, organized, autonomous and able to work under limited supervision.

Team player: able to work with suppliers and customers.

Must be dynamic, use initiative, have a strong sense of responsibility and good judgment.

Flexibility is expected: (may be on-call, shift-work, rotational work, weekends, odd hours, etc).
 
Job Number: 2303
Job Location: Toronto, Canada
Rate: 58.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 01/17/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Email: tdm@tdm.ca
Website: www.tdm.ca

2304 - AVIONICS SYSTEMS ENGINEER - cv. word doc only

Description:
Support of Compliance to Certification Authority; author Certification Plans

Provide specialist advice relating to test methods and procedures

Review testing readiness and conformities of assigned systems

Review qualification, ground and flight test data of assigned systems

Review flight test reports containing data demonstrating proper system operation as required by Certification Authorities Regulations

Review and Sign flight release documentation (including safety of flight judgments)

Review system performance analysis to ensure proper compliance to regulations

Coordinate with other Certification Authority Delegates for integrated functions (ie, Human Factor, Pilots, et al)

May provide technical leadership to a small engineering team for dedicated technical investigation / test.

Bachelor's degree in Avionics / Electrical/ Aerospace Engineering, plus 12-15 years' experience in Avionics systems design and certification.

Able to obtain a Certification Authority Delegation for assigned systems

Working knowledge of Rockwell Collins Proline 21 or Fusion Avionics Systems would be advantageous.

Must have excellent communication skills in English - both written and oral and be PC literate.

Experience in flight-testing of civil aircraft; and knowledge of TCCA, FAA, and EASA certification requirements (ie, FAA CFR Part 25) required.

Mirabel is just outside Montreal, Canada.
 
Job Number: 2304
Job Location: Montreal/Mirabel, Canada
Rate: $63.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 01/17/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Email: tdm@tdm.ca
Website: www.tdm.ca

7 Aircraft Stress Engineers with Composites

Description:
7 Aircraft Stress Engineers Needed.
Require 10+ years of aircraft/aerospace stress analysis with a good composites background.
Previous FEMAP experience is a plus.
Composite airframe analysis experience a MUST.
MUST be US Persons

Qualifications:
-Experience in aircraft or spacecraft composite, design and analysis processes
-Knowledge of composites manufacturing and sizing of composite structures using FEA models, including pre and post processing of NASTRAN models and associated sizing of composite structures
-Minimum 10 years or more of applicable experience in the analysis of structural systems using strength of materials and finite element based methods
-Experience with free-body diagrams and classical stress analysis techniques
-Experience with FEMAP
-Rapid prototyping experience a strong plus
-Excellent computer skills, including Outlook, Word, Excel and PowerPoint
-Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired
-Applicants must be U.S. persons as defined by ITAR
Educational Requirements-
Bachelors degree from an accredited institution, with a concentration in a relevant Engineering discipline

The Structures Company is an AA/EOE.
 
Job Location: Mojave, CA
Rate: $75-85/hr
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 01/15/2018
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: chrissheets@thestructurescompany.com
Website: www.thestructurescompany.com

A&P Mechanic

Description:
Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM’s. They are a mid-size but rapidly growing company in Seattle, WA that was founded in 2001. They have a new flight test facility in Moses Lake WA. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.

The strategic purpose of the Test and Evaluation (T&E) Support Unit is to provide comprehensive, full-service aerospace flight-testing and evaluation services. The Test and Evaluation Support Unit provides four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations. This position is responsible for maintenance support of all flight operations

Primary Role: Performing routine and periodic maintenance throughout all phases of flight testing; maintaining quality and safety standards; keeping records; maintaining equipment and supplies.

Secondary Role: Support flight test engineers and ground operations personnel as necessary by helping to install test instrumentation, wiring, and custom manufactured hardware.


Job Duties and Responsibilities:
Perform daily pre and post flight inspections.
Perform routine servicing of aircraft systems.
Perform aircraft systems checks and calibration as required.
Trouble shoot and repair pre and post flight squawks in a timely manner.
Assist in the installation and removal of essential flight test instrumentation hardware and wiring.
Routine removal of panels to route and access flight test instrumentation wires and hardware.
Maintain safe operations and workspace.
Maintain equipment by completing preventive maintenance requirements; following manufacturer's instructions; troubleshooting malfunctions; calling for repairs.
Knowledge/Skills/Abilities:

Experience in maintenance support related to flight test is desired but not required.
Experience with or willing to learn working in a flight test environment.
Professional mannerisms, appearance and actions (self-confident and committed to high ethics).
Strong organizational, time management and prioritization skills:

Education
High School Diploma
Formal training in Aviation Maintenance Technologies or other related field
A & P Certificate or equivalent Certificate
1-5 years minimum experience maintaining commercial and/or regional aircraft
 
Job Location: Moses Lake, WA
Rate: open
Per Diem: Possible
Overtime: Yes
Duration: 2-3 years or direct
Start Date: Now
Input Date: 01/16/2018
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Email: smcglinsey@velocity-cs.com
Website: www.velocity-cs.com

Accounts Payable Temp - Entry Level

Description:
Our client in Tallassee, AL is looking for an Accounts Payable Clerk

In this role you would:
  • Daily matching invoices, data entry, scanning, and filing.
  • Process and review employee expense reports.
  • Organize and coding journal entries.
  • Handle day to day accounts payable correspondence.



 
Required Qualifications:
  • Experience with Microsoft Excel
  • Basic accounting or bookkeeping experience.


  • Problem-solving skills
  • Good communication skills
  • Aerospace or manufacturing businesses background a plus

 
Job Number: 1710078666
Job Location: Tallassee, AL
Duration: 1 months
Input Date: 01/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Earl Sawyer
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023UOXAA2&URLSource=cjhunter

Aero Thermal Fluids Analyst

Description:
Location: Jupiter, FL
Rate: $60.00 - $62.00/HR
Duration: 1 year contract
Shift: 1st Shift

**Candidates must either have an Active Secret Clearance or have had a Secret clearance in the last two years **
** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

Duties:
**Candidates must either have an Active Secret Clearance or have had a Secret clearance in the last two years **
-Conduct aerothermodynamic and heat transfer design and analysis of hypersonic air-breathing propulsion systems (ramjets/scramjets) and/or liquid rocket engines.
-Develop thermal models to design and analyze cooled and un-cooled engine components.
-Develop fluid flow models using Computational Fluid Dynamics codes or other analytical tools.
-Design, test and analyze data from component rigs to supplement or validate analytical models.
-Support planning and testing of engines (ground and flight) and analyze the test data.
-Document work performed in the form of reports and briefings.

Skills:
**Candidates must either have an Active Secret Clearance or have had a Secret clearance in the last two years **
-Knowledge of aerothermodynamics and heat transfer as applied to scramjet and/or liquid rocket engine systems, including turbomachinery and combustion devices.
-High proficiency levels in ANSYS Mechanical or Workbench heat transfer analysis tools, ANSYS CFX, FLUENT or comparable CFD codes.

Education:
**Candidates must either have an Active Secret Clearance or have had a Secret clearance in the last two years **
- B.S. degree or higher in Mechanical or Aerospace engineering, or equivalent engineering
 
Job Number: 7854
Job Location: Savannah, GA
Rate: $60.00 - $62.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 01/17/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

Aero Thermal Fluids Analyst with active secret / ANSYS heat transfer CFD aerothermodynamics liquid rocket engine systems turbomachinery combustion devices URGENT FL

Description:
160246/7337135

Job Title: Aero Thermal Fluids Analyst
62.86/hr


Number of Positions: 3
Remaining Positions: 3
Duties: ** Candidates must either have a current Secret clearance or have had a Secret clearance in the last two years **

** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

** Selected candidates for Jupiter, FL roles must be onboarded through one of these approved background check providers: EIS, First Advantage or Sterling / Talentwise. See attachment for specific background check onboarding requirements **


-Conduct aerothermodynamic and heat transfer design and analysis of hypersonic air-breathing propulsion systems (ramjets/scramjets) and/or liquid rocket engines.
-Develop thermal models to design and analyze cooled and un-cooled engine components.
-Develop fluid flow models using Computational Fluid Dynamics codes or other analytical tools.
-Design, test and analyze data from component rigs to supplement or validate analytical models.
-Support planning and testing of engines (ground and flight) and analyze the test data.
-Document work performed in the form of reports and briefings.
Skills: -Knowledge of aerothermodynamics and heat transfer as applied to scramjet and/or liquid rocket engine systems, including turbomachinery and combustion devices.
-High proficiency levels in ANSYS Mechanical or Workbench heat transfer analysis tools, ANSYS CFX, FLUENT or comparable CFD codes.

Education: B.S. degree or higher in Mechanical or Aerospace engineering, or equivalent engineering


Skills: Required
• ANSYS
• ACTIVE SECRET CLEARANCE

State/Province: Florida
City/Town: Jupiter
Address: 17900 Beeline Hwy


Start Date: 09/18/2017 Hours Per Week: 40.00
Est. End Date: 09/18/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7337135
Job Location: Jupiter, FL
Rate: 62.86/hr max
Duration: 12 month contract
Input Date: 01/23/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer / no clearance TX

Description:
Requirement#AERO-REQ-0718
Work LocationPalmdale, CA
Work Week9/80-A
PriorityHigh
Needed Date01/02/2018
End Date12/21/2018
Number of Resources1
Security ClearanceNo Clearance
TitleAeronautical Engineer

Description
Design of structural detail parts, assemblies and installations, as well as, systems installations for peculiar versions of F-35 production aircraft. Engineer shall be responsible for: (1) development of layouts, preparation of engineering drawings, planning, scheduling, and coordination of activities of assigned subordinate engineers, (2) preparation of work statements, quotes and EDAs to support customer requirements, product improvements and cost reductions, and (3) support of manufacturing operations and customers in resolving technical problems related to the aircraft structure and systems. Candidate must be able to coordinate efforts with little or no supervision across a wide range of functional organizations, such as Planning, Tooling, Stress, M&P, R&M, Materiel, Flight Sciences, Test, Manufacturing, and other Design IPTs to ensure that designs meet customer and derived requirements. Some travel and overtime may be required. Candidate must have aerospace design experience with knowledge of configuration management techniques, drafting/drawing conventions, and aerospace specifications and procedures.
Skill/Experience/Education
Mandatory:

9+ years of structural design experience in composite part and bond assembly design. Must be proficient using PDM programs. Must be proficient using CATIA V5. Must be a US Citizen.
Desired:

Bachelor Degree or Higher in an Engineering Discipline. FiberSim experience. Control surfaces and edges design experience. CATIA V4 experience.


Interview RequiredNo
OT AllowedYes (#hours allowed: 20, Pre-Approval Reqd.:No)
TravelNo
Non-Exempt
Rate TypePer Hour
Rates
0-4 YrsPay Rate: 39.00 USD
5-8 YrsPay Rate: 54.00 USD
9+ YrsPay Rate: 74.00 USD
 
Job Number: JE-0718
Job Location: Fort Worth, TX
Rate: 39-74/hr DOE
Duration: 12 month contract
Input Date: 12/07/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Aerospace Design Support and Training Instructor/TSI

Description:
PDS Tech is seeking a Aerospace Design Support and Training Instructor/TSI for an open position in Savannah, GA.
In your role, you will:


Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of the Client's products and services.

Essential Functions:
  1. Contributes to planning, developing and coordinating of important engineering projects
  2. Provides specialized technical assistance to team members
  3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
  4. Determines and develops own approach to solutions within schedule and cost objectives
  5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
  6. Acts as liaison with representatives outside of the assigned group/area 


Additional Functions:

  • Actively works to improve daily processes and ensures all work meets customer requirements
  • Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
  • Performs other duties as assigned 

As our ideal candidate, you will meet the following requirements:
 

Education and Experience Requirements:


Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Other Requirements:

  • Advanced degree in engineering related field preferred
  • The level of technical skill and abilities appropriate for this grade will be established by each discipline


Unique Skills:



CATIA v5 experienced with 2000+ hours. Level 1 tools CATIA v5 (Part Design, Assembly, Drafting). Generative Surfacing a plus. Experience working within PDM systems such as Enovia, SmarTeam or NX/Teamcenter. Established background of instruction or support role. Formal Classroom instruction experience required.

PDS Tech, Inc. is an Equal Opportunity Employer and will not discriminate against applicants on the basis of race, color, religion, sexual orientation, gender identity, national origin, veteran status, or disability. 



 
Job Number: 1610055767
Job Location: Savannah, GA
Duration: 6 months
Input Date: 01/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Rodney Kinlaw
Address: 900 CIRCLE 75 PKWY SE STE 600
City, State: ATLANTA, GA 30339
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002MyvjAAC&URLSource=cjhunter

Aerospace Engineer ( Dulles, VA ) 7598203, GNC

Description:
Aerospace Engineer ( Dulles, VA ) 7598203
6 Month Contract

Pay Rate : $80/hr

**Looking for cand. w/ Satellite exp. Need strong GNC background/education/work exp. Exp. designing guidance and controls systems pref. Knowledge of GNC software important.

Cand. w/ hands-on exp. are key. No work from home or contractors who have moved around a lot. Should have steady exp. working with known companies. Looking for at least 10 yrs of exp. 3-5 yrs/fresh outs will not work. Do not want to spend time training unskilled workers.

Cand. will work with Product Lead and report to the Sr. Mgr of Eng.**

Perform spacecraft attitude control systems analysis, design, development and test activities. Design and develop spacecraft Guidance, Navigation and control algorithms using MATLAB and Simulink. Develop subsystem specifications, GNC Flight software and GNC test scripts. Develop and test operations scripts. Document analysis results and create presentation materials.
 
Job Number: 7598203
Job Location: Dulles, VA
Rate: 80
Per Diem: Split
Overtime: Yes
Duration: 6 month
Start Date: ASAP
Input Date: 01/19/2018
Firm Name: TALENTPRO CONSULTING
Attention: Tim
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X101
Fax Phone: 641/209-3001
Email: timmahaney@talentproconsulting.com
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Engineering Project Managers - Atlanta, GA

Description:
STS AeroStaff Services is hiring Aerospace Engineering Project Managers in Atlanta, Georgia.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Duties:

• Performs a variety of duties associated with the development and revision of aircraft maintenance work instruction cards
• May utilize an automated publishing system to author certain work instruction cards; others will be done using PC based word processing
• Practices safety-conscious behaviors in all operational processes and procedures

Qualifications:

• Minimum of three years in aircraft maintenance environment plus a minimum of two years in Technical Publications or equivalent training required
• A&P, FCC license, and/or technical degree preferred, or 15 years technical publications experience with working with aircraft/engine manuals, component manuals, or work card authoring
• Experience and ability to read and interpret wiring diagrams and schematics preferred
• Must be able to interpret engineering documents/drawings, analytical reports, Federal Aviation Regulations, Airworthiness Directives and OEM manuals
• Computer experience in MS Office and Adobe products required

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 40774
Job Location: Atlanta, GA
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 12/04/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Materials Estimator

Description:
(85%) Reads and understands RFP requirements and documents and communicates ground rules/assumptions used in proposals. Material Estimators generally perform the following in support of the cost Proposal:

Work with Engineering, Supply Chain and Manufacturing to obtain the latest BOM to initiate the estimating process
Work with Program Management and Integrated Product Teams to determine BOM requirements based on the statement of work including tooling, test units, spares or any materials not identified on the latest BOM.
Work with functional areas to identify excess material attrition/scrap factors
Identify current quote requirements in order to achieve 80% or more of the Proposal BOM (PBOM) if required.
Coordinate with Supply Chain Material Program Managers the supplier quote process
Coordinate with Supply Chain Material Planners current inventory, material transfers and historical part pricing
Review quotes received and populate the PBOM
Incorporate escalation, quantity variance curves and extend pricing for required quantities
Produce PBOM Addendums and other schedules
Focal for all estimates, proposal substantiation, PBOM development, and audit files
Responsible to ensure compliance with FAR/TINA requirements on proposal substantiation, basis of estimates, fact-finding, and negotiations
(15%) Maintains pricing systems and procedures.

Collects, analyzes and stores data for estimating and analysis.
Keeps current with federal acquisition (FAR) regulations and customer requirements.
Assists in developing, maintaining and monitoring estimating and estimating standards, procedures and processes.
Conceives and plans process improvement projects involving the development of new approaches and methods to attain objectives.
May provide input to department objectives and long-range goals.
Keeps current with programs, customers and Aerojet program team.
Plans and performs systems and procedures audits.



Knowledge of basic mathematics and statistics, analytical aptitude, strong oral and written communication skills. Requires familiarity with estimating and pricing procedures, audit methods.
Manufacturing, material planning, finance or supply chain background – or some knowledge of the processes.
Understands difference between Manufacturing and Engineering Drawings/BOMs
MS Office skills including Excel, Word, Access and PowerPoint
Intermediate level Excel knowledge (SUMIF, VLOOKUP, combination formulas, etc.).
Understanding of applicable federal acquisition regulations plus a strong knowledge of current (TINA) disclosure requirements.
Requires a willingness and ability to work extended hours when proposal schedules necessitate.
Basic understanding of Blue Prints / Drawings, Part lists preferred.
Experience and knowledge with EBS ProPricer or other pricing software preferred.
Familiarity with aerospace rocket motor program materials and manufacturing processes is a plus.


Bachelor's degree in engineering, finance, business management or manufacturing operations discipline and six (6) or more years directly related experience, or an equivalent combination of education and experience.
 
Job Number: Aero777
Job Location: Canoga Park, CA
Input Date: 11/29/2017
Firm Name: NESC STAFFING
Attention: Christina Ellis
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
Phone: 603/431-9740
800 Phone: 800/562-3463
Fax Phone: 800/637-2562
Website: www.nesc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Mechanical Design Engineers - Greensboro, NC

Description:
STS AeroStaff Services now offers Aerospace Mechanical Design Engineer jobs in Greensboro, North Carolina.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Summary:

The Manufacturing Engineer position provides technical support for the Design Engineering Group working in areas such as manufacturing, design, development, and testing.

Job Duties:

• Supports work specific to detail parts manufacturing and assembly operations within a manufacturing environment
• Develops documentation and procedures to ensure compliance specific to customer, and regulatory production requirements and specifications
• Interprets engineering drawings to determine requirements meet objectives
• Acts as liaison between design engineering, tooling department, machine shop, metal bond shop, composites and plastics shop, tube shop, manufacturing graphics department, quality and the production floor
• Analyzes statistical data including process capability studies, tests capability studies, and through-put rates
• Provides technical support and assistance with the development and improvement of methods, quality product design, cost, and technical issues as required
• Plans and documents various installation processes, tooling, equipment and quality control methods to optimize the manufacturing operation
• Ensures completed tasks have been performed and inspected in accordance with clien standards
• Identifies and corrects all production and manufacturing issues
• Prepares assembly data sheet and updates planning data sheets
• Assist with BOM identification and control
• Prepares and monitors tool orders and first article inspection sheets
• Details and assembles methods planning and tool manufacturing planning

Education, Experience, Certification and/or Licensure:

• Bachelors' degree in Manufacturing Engineer or other related field strongly preferred
• In lieu of education one year of direct aircraft experience potentially may be substituted for each year of college
• 3+ years’ of experience in Manufacturing Engineering
• 3+ years’ experience in aerospace industry in aerospace manufacturing

Knowledge, Skills and Abilities:

• Working knowledge of or exposure to Lean Manufacturing tools
• Ability to read and interpret engineering drawings and/or specifications requirements
• Excellent oral and written communication skills
• Excellent problem solving skills
• Ability to work in a diverse environment
• Excellent communication and presentation skills.
• Some experience utilizing tools such as SAP, CAD CAM, CATIA, Microsoft Office Suites (Word, Excel, PowerPoint, Project, and Lotus Notes)
• Ability to multitask
• Strong organizational skills

Physical Requirements:

• Incumbents may be routinely exposed to equipment operational noise heat-cold-dust, and/or aircraft equipment, parts, or fuel odors
• Incumbents may be required to stand, sit, squat, walk, bend, move, reach, or stretch for prolonged time periods with no restrictions, as required by job duties
• Work in a safe and professional manner while adhering to all regulatory requirements (FAA, OSHA, DOT, EPA, State, and Federal regulations, etc.)
• Read, hear, speak, and see with no restrictions, as required by job duties
• Comprehend and adhere to management directions and/or safety instructions with no restrictions
• Effectively communicate in Business English language
• Pull, push, carry, lift, or move items up to 10 lbs. throughout the work shift without assistance, as required by job duties
• Pull, push, carry, lift or move materials/people/items/equipment weighing up to 50lbs or more during the work shift, with the use of Company provided “reach assistance technology” or “movement assist technology” (fork-lifts, pallet jacks, pulleys, dolly’s, robotics reach equipment, people movers etc.), as required by job duties

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 40721
Job Location: Greensboro, NC
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 11/27/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

Aerospace Positions

Description:
Hiring in multiple locations

Email your resume or apply online

Benefits Available
- long term contracts
- top per diem rates
- direct deposit
- referral bonuses
- 401(k) program
 
Input Date: 05/09/2017
Firm Name: NESC STAFFING
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
800 Phone: 800/562-3463
Email: lokeefe@nesc.com
Website: www.nesc.com

Air Systems

Description:
ECS for interiors/cabin pressure systems; aerospace flight and test/certification engineering specialists

Paid Travel
Great Hourly Rates
Direct Deposit
Per Diem
Tax Benefits
Healthcare Options
 
Job Location: Washington
Input Date: 03/27/2017
Firm Name: NORAMTEC CONSULTANTS AMERICAS INC
Attention: Erika
Address: 150 RESEARCH BLVD
City, State: ROCHESTER, NY 14623
Phone: 585/441-9800 x106
Email: erika.legrand@noramtecna.com
Website: www.noramtec.com

Aircraft Interior Tech

Description:

PDS is seeking a Aircraft Interior Tech for an open position in Greensboro, NC
In your role, you will:


Position Purpose:
Works under general supervision to remove, install, and/or fabricate aircraft interiors, which may include items such as trim, carpet, sound proofing, light structure, cabinetry, panels and other accessories. All work performed should be in accordance with company design specifications, quality standards and completed work should meet customer expectations.


Principal Duties and Responsibilities:

Essential Functions:

1. Safely perform aircraft removal, installation, and/or fabrication of aircraft interiors (which may include galleys, closets, lavatories, side ledges, bulkheads, doors and panels). Coordinate with supervision and Inspection to ensure compliance with Repair Station procedures, internal and FAA paperwork, sign-offs and quality specifications.
2. Follow standard operating procedures when using tools and equipment such as hand tools, band saws, shears, sanders and brakes. Properly care for and maintain shop equipment and tools.
3. Prepare and install aircraft interior items in accordance with company operation procedures and quality standards.
4. Remove and re-install nut plates, inserts and other fasteners used in aircraft interiors. Apply proper use of hardware and fittings on aircraft installations.
5. Assist technicians, under supervision, with aircraft maintenance requirements.

 
 
Other Requirements: 

Education and Experience Requirements:
  1. High school diploma/GED.Two (3) years of applicable installation, fabrication or related experience. Experience in aerospace industry preferred.
  2. Ability to read, write, speak, and understand the English language. 
  3. Ability to read and interpret blueprints and engineering documentation. 
  4. Ability to use hand/power tools and equipment associated with installation and removal of interiors. 
  5. Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift. 
  6.  Must be computer literate. 
  7. Excellent communication skills, both verbal and written.

 
Job Number: 1710062037
Job Location: Greensboro, NC
Duration: 12 months
Input Date: 01/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Patrick Mahoney
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002G5riAAC&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Airframe Design Engineer / NX and FiberSIM CA

Description:
Job ID# 14657

Title Airframe Design Engineer
Job Summary General Atomics Aeronautical Systems, Inc. (GA-ASI), an affiliate of General Atomics, is a world leader in proven, reliable remotely piloted aircraft and tactical reconnaissance radars, as well as advanced high-resolution surveillance systems. We recognize and appreciate the value and contributions of individuals with diverse backgrounds and experiences and welcome all qualified individuals to apply.

We have an exciting opportunity for an Airframe Engineer within our Airframe Design Group at General Atomics Aeronautical Systems. This is an airframe design and analysis position in the Advanced Aircraft Engineering Organization located in San Diego, CA. Under the general direction of Engineering management or IPT lead, serve as a member of the airframe design team providing conceptual and detail designs of primary and secondary structural aircraft components. General responsibilities include leading and coordinating the design activities of a team of 1-5 engineers within an assigned project. Establish and communicate clear task expectations. Primary product lines for design activities will be unmanned aerial vehicles, modification of existing aircraft structures and special projects to support sensor integrations.

DUTIES AND RESPONSIBILITIES:•Able to self-prioritize tasks. Works under general direction
•Produce airframe structural configuration layouts and detail designs including preliminary sizing/stress analysis, joint layouts, interface boundary definitions of parts and assemblies employing metallic and composite materials.
•Create and maintain CAD solid models and drawings of installations, assembly and detail components that meet all requirements such as structural integrity, interface boundaries, weight and cost targets as directed by the project engineer.
•Periodically review and check the product structure and BOM’s of the team to insure fit, form, function of the structural components is maintained.
•Conduct periodic design reviews as required to ensure designs meet the requirements.
•Coordinate and collaborate with members of stress, manufacturing, procurement, quality control and other departments as required to mature the design from conception to production.  
•Create and maintain documentation that tracks team weekly progress status as it related to the Program budget and deadlines.
•Prepare PowerPoint presentations to support Program PDRs and CDRs.
Provide technical support and mentorship to those less experience members of the team.

Qualifications Essential Qualifications Typically requires a bachelors degree, masters degree or PhD in engineering or a related technical discipline from an accredited institution and progressive engineering experience as follows; six or more years of experience with a bachelors degree, four or more years of experience with a masters degree, or two or more years with a PhD. May substitute equivalent engineering experience in lieu of education. Must have a thorough understanding of engineering concepts, principles, codes, and theory; experience demonstrating a broad application of those concepts; and, expanding knowledge of principles, concepts, theory, and practices in related technical specialties. Must possess the ability to develop and communicate new concepts; apply them accurately throughout an evolving environment; organize, schedule, and coordinate work phases; and, determine the appropriate approach at the task level or, with assistance, at the project level to provide solutions to a range of complex problems. Must have strong communication, computer, documentation, presentation, and interpersonal skills, ability to work independently and as part of a team; able to perform complex tasks in one or more engineering areas; capable of representing the organization as a prime technical contact and, lead a team of moderately experienced professional employees on single component projects. Able to work extended hours as required. A Professional Engineering License and original work published in professional engineering journals are desirable.
Additional Qualifications - Typically requires a bachelors degree, masters degree or PhD in engineering or a related technical discipline from an accredited institution and progressive engineering experience as follows; six or more years of experience with a bachelors degree, four or more years of experience with a masters degree, or two or more years with a PhD. May substitute equivalent engineering experience in lieu of education. BS in Mechanical Engineering, Aerospace Engineering or similar are desired. Advanced degrees highly desirable.
- Experience with the composite part detail process, including composites stacking sequence, lamination theory, honeycomb core, bonded assemblies, manufacturing assembly and fabrication processes, post-cure machining operations desired.
- Familiar with industry standards for the manufacture, repair and assembly of composite components for aerospace.
- Experience with NX and FiberSIM

City San Diego
State California
Travel Percentage Required 0% - 25%
Clearance Required? No
Work Schedule Rule 9/80
Temp Assignment Duration (# of Days) 180
 
Job Number: JE-14657
Job Location: San Diego, CA
Rate: 60/hr max
Duration: 6 month contract
Input Date: 01/10/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Associate Recruiter - Seattle

Description:


Job Title:      Associate Recruiter
Location:      Seattle, WA
Salary:           Base + Commission
Job Type:      Full Time w/ benefits
 
 User-added image
 
“Connecting the Right People to the Right Jobs”
Do you have a passion for interacting with people and helping them find a job?  Do you thrive in a fast paced, high volume environment?  If so, PDS Tech may have an opportunity for YOU!  We are looking for self-confident experienced recruiters that can persevere in the staffing world.
Why work for PDS Tech?
  • Founded in 1977 and still going strong
  • We rank in the top 30 staffing companies in the U.S.
  • PDS is the 5th largest engineering staffing firm in the country
  • Offices nationwide with 10,000 plus contract employees
  • PDS pays competitive base salaries with an uncapped commission plan
  • Company benefits include:  Immediate eligibility in 401K, profit sharing, full health and dental insurance, vacation days, sick days, holidays and direct deposit
  • CareerBuilder.com highlighted us as one of the “10 Companies Hiring 100s of Workers Now”.

  
Job Responsibilities:

  • Develop recruiting strategies designed to identify qualified candidates through various recruiting tools; Internal database, Job board search, Internet, Phone contact etc.
  • Interview, evaluate, and hire contract personnel
  • Market positions and negotiate wage rates with candidates
  • Format and submit quality resumes to customers
  • Exercise good discretion and good judgement in recruiting candidates
  • Complete necessary employment processes including; reference check, background/drug test etc.
  • Maintain relationship with clients and contractors on assignment
  • Attend job fairs and/or networking events
  • Meet monthly objectives
           



Job Requirements: 
  • 2 years of IT help desk or IT phone sales
  • High sense of urgency and persuasive personality
  • Ability to build rapport with people over the phone
  • Ability to work independently and exercise sound judgment
  • Experience working with Microsoft Office (Excel, Work, Outlook) 
  • Internet savvy
  • Strong written and oral communication skills

 To View all jobs at PDS Tech please visit our career section at http://www.pdstech.com
PDS Tech, Inc. is an Equal Opportunity Employer and will not discriminate against applicants on the basis of race, color, religion, sexual orientation, gender identity, national origin, veteran status, or disability.

 
About PDS:
PDS Tech, Inc., is an award winning specialty recruiting firm that supplies temporary staff and project support to Fortune 500 clients. Founded in 1977 by an aerospace engineer, PDS Tech has its roots in aerospace and defense engineering, IT staffing, and IT project support; PDS counts among its customers the finest companies in those industries. Over the years, PDS Tech has grown and diversified and now ranks in the top 30 staffing companies in the U.S. and is the 4th largest engineering staffing firm. PDS Tech has a reputation with its 10,000 plus contract employees for providing the most superior employment experience in the industry, including world class benefits and paperless employment solutions.
 
 
 
 
 
Job Number: 1710074287
Job Location: Seattle, WA
Duration: 12 months
Input Date: 01/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Stacy Smith
Address: 12720 GATEWAY DR S STE 102
City, State: TUKWILA, WA 98168-3333
Phone: 206/763-2840
800 Phone: 800/678-8644
Fax Phone: 206/763-3283
Email: cecjseattle@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023IXqAAM&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aviation Warranty Coordinators - Atlanta, GA

Description:
STS AeroStaff Services now offers Aviation Warranty Coordinator jobs in Atlanta, Georgia.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Duties:

• The TechOps Supply Chain Warranty team is seeking an experienced professional responsible for execution of aircraft, component, cabin, and engine warranty claim processes
• The successful candidate will collect information to substantiate warranty claims, and process claims to completion
• The role will also support developing improvements to the efficiency, productivity, and performance of the role
• This role will collaborate with both SCM and cross-divisional Tech Ops stakeholders
• The individual should have a minimum of 3 years’ of experience in an operations environment with a large and diverse complement of employees, and ability to work with minimal supervision and complete ownership of projects
• Practice safety conscious behaviors in all operational processes and procedures

Qualifications:

• Bachelor’s degree in Operations, Management, or Aerospace, Mechanical, Industrial Engineering or related discipline is strongly preferred; equivalent A&P License with 3 years’ airline work experience is acceptable
• Understanding of Supply Chain processes and metrics, ability to influence without authority, and work in a matrix environment is a highly preferred
• Advanced computer, analytical, organizational, written and verbal communication skills is highly preferred
• Experience in database mining in the Hyperion or equivalent environment to identify aircraft parts reliability trends is a strong plus
• Candidates with experience in data science or advanced analytics will be strongly considered
• Must be a strong team player, detail oriented, and exhibit a healthy curiosity or interest in aviation
• Candidate should demonstrate the ability to communicate effectively and structure/deliver presentations targeted toward varied audiences including company leadership
• Must be a self-starter able to work independently with limited supervision and effectively prioritize and deliver on tasks
• Only candidates with strong Microsoft Word, PowerPoint, and Excel skills will be considered for this role
• Must be performing satisfactorily in current role

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 40846
Job Location: Atlanta, GA
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 12/06/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

Avionics -- Flight Management Systems

Description:
Aerospace flight and test/certification engineering specialists

Paid Travel
Great Hourly Rates
Direct Deposit
Per Diem
Tax Benefits
Healthcare Options
 
Job Location: Washington
Input Date: 03/27/2017
Firm Name: NORAMTEC CONSULTANTS AMERICAS INC
Attention: Erika
Address: 150 RESEARCH BLVD
City, State: ROCHESTER, NY 14623
Phone: 585/441-9800 x106
Email: erika.legrand@noramtecna.com
Website: www.noramtec.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer III / Instrumentation / CREO / MODELCHECK / Harness cable electro-mechanical packaging CA

Description:
7356312
Job Title: Avionics Engineer III / Instrumentation

Number of Positions: 1

Remaining Positions: 1

Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **




** Candidates should have experience with Creo Parametric and Creo Cabling. Experience with Creo Schematics; Windchill; and Modelcheck preferred **



-Support Electro-Mechanical Packaging of complex electrical/electronic assemblies.

-Extensive knowledge of electronic packaging design for harsh environments, with Aerospace and/or military experience.

-Experience is design of cables and harnesses for applications for Aerospace products.

-Proficiency in use of Creo PDM/Link and Windchill.

-Additional proficiency with GD&T and tolerance analysis.



Skills:
Prior experience and detailed knowledge of Windchill PDMLink 10.1 or greater
Previous experience with MODELCHECK preferred
Proficiency with Creo Parametric 2.0 (or greater) with extensive knowledge of:
Large Assembly Management, Simplified Representations, Combination States
Top Down Design with Skeletons including Publish Geometry, Copy Geometry, and Shrinkwraps
Mechanism Design
Advanced part modeling techniques including the use of relations, analysis features, and flexible components
Experience with Creo Cabling including
Utilizing logical reference data (automated routing)
Harness flattening using Creo Harness-MFG extension
Working knowledge of Creo Schematics 2.0 desired including:
Block Diagram to Wiring Diagram Schematic Development (aka “BID to WID”)
Diagram creation utilizing a Central Catalog

Education:
BSME with 10 years of experience or 15 + years of equivalent experience

Skills:
Required

AVIONICS INSTRUMENTATION CREO WINDCHILL GEOMETRIC DIMENSIONING GEOMETRIC TOLERANCING

State/Province: California
City/Town: Canoga Park

Start Date: 11/06/2017 Hours Per Week: 40.00
Est. End Date: 05/06/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7356312
Job Location: Canoga Park, CA
Rate: 49/hr max
Duration: 6 month contract
Input Date: 12/19/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer III/Instrumentation

Description:
Avionics Engineer III / Instrumentation
Canoga Park, CA
Rate: $45-$49


Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **




** Candidates should have experience with Creo Parametric and Creo Cabling. Experience with Creo Schematics; Windchill; and Modelcheck preferred **



-Support Electro-Mechanical Packaging of complex electrical/electronic assemblies.

-Extensive knowledge of electronic packaging design for harsh environments, with Aerospace and/or military experience.

-Experience is design of cables and harnesses for applications for Aerospace products.

-Proficiency in use of Creo PDM/Link and Windchill.

-Additional proficiency with GD&T and tolerance analysis.



Skills: •Prior experience and detailed knowledge of Windchill PDMLink 10.1 or greater ◦Previous experience with MODELCHECK preferred

•Proficiency with Creo Parametric 2.0 (or greater) with extensive knowledge of: ◦Large Assembly Management, Simplified Representations, Combination States
◦Top Down Design with Skeletons including Publish Geometry, Copy Geometry, and Shrinkwraps
◦Mechanism Design
◦Advanced part modeling techniques including the use of relations, analysis features, and flexible components

•Experience with Creo Cabling including ◦Utilizing logical reference data (automated routing)
◦Harness flattening using Creo Harness-MFG extension

•Working knowledge of Creo Schematics 2.0 desired including: ◦Block Diagram to Wiring Diagram Schematic Development (aka “BID to WID”)
◦Diagram creation utilizing a Central Catalog


Education: •BSME with 10 years of experience or 15 + years of equivalent experience
 
Job Number: 8082
Job Location: Canoga Park, CA
Rate: $45-$49
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 12/18/2017
Firm Name: INCONEN CORPORATION
Attention: Cathy O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Bleed Air Designer (7 needed)

Description:
The Designer for BAS/VCS is responsible for providing design expertise in support of the Bleed Air System (BAS) and Vapor Cycle System (VCS) through all phases of project schedule including preliminary design, detailed design, development, certification, sustaining, production and product support.

Duties and Responsibilities:
1. Prepare 3D layout models of the BAS and VCS.
2. Prepare 3D installation and detail models of the BAS and VCS.
3. Prepare 2D installation, assembly and detail drawings of the BAS and VCS.

Education, Work Experience, Certification and/or Licensure:
1. Bachelors of Science in Aerospace or Mechanical Engineering from an accredited four year
college or university program
2. Minimum 5+ years of directly related design experience in the development and certification of aircraft BAS and VCS.
3. Minimum 3+ years’ experience utilizing Catia V5 3D modeling software

Knowledge, Skills and Abilities:
1. Ability to create 3D models utilizing CATIA V5.
2. Knowledge of one Product Life Cycle Management Tool (e.g. Teamcenter, Enovia,..)
3. Knowledge of 14CFR23 or 25 regulations and advisory circulars related to BAS and VCS regulations required and knowledge of Aircraft BAS and VCS.
 
Job Number: 28-011
Job Location: Greensboro, NC
Rate: $50 - 60/hr May pay more DOE
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 12/18/2017
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CNC Programmer IV

Description:
Location: Canoga Park, CA
Rate: $40.00 - $44.00/HR
Duration: 1 year contract (possibility of being extended longer)
Shift: 1st Shift


** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


Duties:
Required (MUST show this experience on resume):
** Siemens NX9-NX11 NC Programming experience is required **
** DMU Mori with Siemens 840D Experience ; Specifically DMU80 FD and DMU65 **
** Expertise in Lathe, Millturn, and 5 axis Mill programming of high temp alloy materials **
** Phone AND In-Person interviews are required. Candidates must be able to attend an in-person interview at their own expense **

- 50% - The NC Programmer is responsible for writing new CNC programs, setup instructions, estimating and making changes to existing CNC programs. Will develop, write and maintain NC programs for complex aerospace components using engineering models, drawings and specifications to support a zero defects machining operations environment. Selects program routines for the most efficient machining methods for each part. Will be involved in the prove out of new technology, first article inspection, fixture design, and day to day programming using Siemens NX9-NX11 CAM.
- 10% - Analyzes engineering models/drawings to define the sequence of machining operations to ensure that the design intent and component quality is achieved.
- 5% - Make proper cutting tool selections, taking into consideration such factors as materials, speeds, type of cutters, feeds and control system imitations.
- 10% - Use machine simulation and optimization software to troubleshoot/validate CNC programs and ensure highly efficient and 100% defect-free FTT machining processes.
- 10% - Modify existing parts programs for engineering changes or program improvements.
- 5% - Work closely with Machinists, Quality, Engineering, Management and other team members.
- 5% - Develop, write and maintain type II probe and logic macros to perform on machine touch probe measuring, fixture updates, cutter offset updates, and part feature data collection.
- 5% - Participate in knowledge sharing and cross training activity within the NC programming group.


Skills:
Required (MUST show this experience on resume):
** Siemens NX9-NX11 NC Programming experience is required **
** DMU Mori with Siemens 840D Experience ; Specifically DMU80 FD and DMU65 **
** Expertise in Lathe, Millturn, and 5 axis Mill programming of high temp alloy materials **



Preferred Requirements:
-NX Post Builder expertise
-NX Machine tool Configurator expertise
-Vericut Machine Builder expertise
-Fanuc custom macro programming expertise
-Siemens 840D macro programming expertise

Education:
-Bachelors degree or equivalent experience.
 
Job Number: 8013
Job Location: Canoga Park, CA
Rate: $40.00 - $44.00/HR
Per Diem: Possible
Overtime: Possible
Duration: 1+ yr
Input Date: 12/26/2017
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CNC Programmer IV / MUST have Current and Strong NX Programming / local only URGENT CA

Description:
Job Title: CNC Programmer IV
Duties: ** Candidates must be U.S. Citizens **** Permanent residents are NOT eligible for this role **** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


Required (Please screen for these three items and make sure the experience is accurately reflected on resumes):
** Siemens NX9-NX11 NC Programming experience is required **

** DMU Mori with Siemens 840D Experience ; Specifically DMU80 FD and DMU65 **

** Expertise in Lathe, Millturn, and 5 axis Mill programming of high temp alloy materials **

** Candidates above the maximum bill rate will be considered. Please make sure that they are submitted at rates commensurate with their qualificaitons **

** Phone AND In-Person interviews are required. Candidates must be able to attend an in-person interview at their own expense **

50% - The NC Programmer is responsible for writing new CNC programs, setup instructions, estimating and making changes to existing CNC programs. Will develop, write and maintain NC programs for complex aerospace components using engineering models, drawings and specifications to support a zero defects machining operations environment. Selects program routines for the most efficient machining methods for each part. Will be involved in the prove out of new technology, first article inspection, fixture design, and day to day programming using Siemens NX9-NX11 CAM.


10% - Analyzes engineering models/drawings to define the sequence of machining operations to ensure that the design intent and component quality is achieved.
5% - Make proper cutting tool selections, taking into consideration such factors as materials, speeds, type of cutters, feeds and control system imitations.
10% - Use machine simulation and optimization software to troubleshoot/validate CNC programs and ensure highly efficient and 100% defect-free FTT machining processes.
10% - Modify existing parts programs for engineering changes or program improvements.
5% - Work closely with Machinists, Quality, Engineering, Management and other team members.
5% - Develop, write and maintain type II probe and logic macros to perform on machine touch probe measuring, fixture updates, cutter offset updates, and part feature data collection.
5% - Participate in knowledge sharing and cross training activity within the NC programming group.



Skills: Required (Please screen for these three items and make sure the experience is accurately reflected on resumes):

** Siemens NX9-NX11 NC Programming experience is required **

** DMU Mori with Siemens 840D Experience ; Specifically DMU80 FD and DMU65 **

** Expertise in Lathe, Millturn, and 5 axis Mill programming of high temp alloy materials **

Preferred Requirements:
-NX Post Builder expertise
-NX Machine tool Configurator expertise
-Vericut Machine Builder expertise
-Fanuc custom macro programming expertise -Siemens 840D macro programming expertise

Education: -Bachelors degree or equivalent experience.

Skills and Experience:
Required Skills:
SIEMENS
NC PROGRAMMING
LATHE

# of Positions: 1

Location:
Canoga Park, CA

Start Date: 10/30/2017
Estimated End Date: 10/30/2018
Hours Per Week: 40.00
Hours Per Day: 8.00

Schedule Notes: Regular 40 hour week. OT possible. This assignment could go for two years for the right candidate.
 
Job Number: MB-7352024
Job Location: Canoga Park, CA
Rate: 44/hr max
Duration: 12 month contract
Input Date: 12/26/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Cabin Safety Engineer V&V

Description:
Velocity’s client, an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM’s, is seeking multiple Cabin Safety Engineers. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.
Seeking contract engineers to join the team in Seattle with at least five years’ experience with cabin safety engineering, to include:
• Experience and knowledge of FDMS & Water Waste Interior Systems (OEM level preferred)
• Experience with requirements writing at aircraft/systems level
• Experience validating requirements (completeness and correctness) and developing verification matrix (plan and results)
• Familiar with requirements definition, traceability, validation and verification process.
• ARP4754A knowledge and experience
• Proficient at DOORS or similar requirement management tool.
Essential functions:
• System requirements verification and validation.
• Flight test and ground test specifications.
• Support flight test and ground test activities.
• Analyze test data and evaluate system operation.
• Prepare test reports.
Desired Qualifications:
• Experience with FAA Part 25 or Part 23 certification, flight and ground test activities.
• Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
• A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
• Ability to represent the client professionally and positively during client interactions and meetings.
• Bachelor degree in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
 
Job Location: Moses Lake, WA
Start Date: ASAP
Input Date: 01/16/2018
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Email: smcglinsey@velocity-cs.com
Website: www.velocity-cs.com

Cabin Safety Specialist

Description:
Annunciator, emergency lighting, human factors, placards, signage

Aerospace flight and test/certification engineering specialists

Paid Travel
Great Hourly Rates
Direct Deposit
Per Diem
Tax Benefits
Healthcare Options
 
Job Location: Washington
Input Date: 03/27/2017
Firm Name: NORAMTEC CONSULTANTS AMERICAS INC
Attention: Erika
Address: 150 RESEARCH BLVD
City, State: ROCHESTER, NY 14623
Phone: 585/441-9800 x106
Email: erika.legrand@noramtecna.com
Website: www.noramtec.com

Cabinetmaker Sr

Description:

PDS is seeking a Cabinetmaker Sr for an open position in Savannah, GA.

Under general supervision, fabricates the most complex cabinets and other wood-surfaced subassemblies for installation in aircraft. Assists lead by overseeing projects and providing guidance, assistance and training to co-workers. 

Essential Functions:

  1. Fabricates complex high quality furniture and other wood-surfaced subassemblies using stationary and hand held-tools.
  2. Interprets material specifications and design/engineering drawings to ensure finished product meets design and engineering requirements with a high level of quality and detail. Coordinates with supervision to ensure compliance with customer approved design samples.
  3. Utilizes a variety of woodworking tools and techniques.
  4. Complies with and champions safety, 5S, and housekeeping policies and ensures the protection of aircraft interiors.
  5. Works with lead and higher skilled technicians to develop and implement process improvements that increase safety, reduce, cost, cycle time, and man-hours using Lean Six-Sigma and other process improvement techniques.
  6. Utilizes the material tracking system to create parts demand, track squawks and to sign-off work. 


Additional Functions:

  • Accepts Lead responsibilities when required. Mentors and trains lesser skilled technicians.
  • Oversees projects and coordinates with Lead to delegate tasks to assigned technicians.
  • Conducts safety audits and assists team members in doing safety audits.
  • Assists in maintaining shop equipment and associated JSAs.
  • Coordinates with other backshops when necessary.
  • Adapts to sudden schedule changes.
  • Performs other duties as required.


 



Education and Experience Requirements:



  • Must be able to work any shift and work overtime as needed.
  • High school diploma/GED.
  • Advanced knowledge of cabinetmaking processes and products.
  • Four (4) years of experience in cabinetmaking.
  • Experience in aerospace industry preferred.
  • Possess a working knowledge of inspection and process specifications preferred.

Other Requirements:

  • Demonstrates excellent communication skills, both verbal and written.
  • The ability to read, write, speak, and understand the English language.
  • Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift.
  • Must be computer literate..


Please send your current resume to:
Earl Sawyer
Aviation recruiter 
esawyer@pdstech.com
843-277-6616  

 
Job Number: 1710074567
Job Location: Savannah, GA
Duration: 6 months
Input Date: 01/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Earl Sawyer
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023JSqAAM&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Chemical Engineer

Description:
Chemical Engineer
Location: Tulsa, OK
Duration: 12+ months
Rate: Open, DOE
Chemical Engineer Summary Statement:
Applies extensive knowledge of principles, theories and concepts related to Chemical Engineering.
Chemical Engineer Essential Functions and Key Responsibilities:
Develops solutions to a variety of problems of moderate scope and complexity.
Solves unusual problems that require moderate ingenuity and innovation related to chemical engineering, chemical formulations and manufacturing processes. Work is accomplished under general management direction. Applies extensive knowledge of chemistry and chemical engineering to design and develop transparency related aircraft products for military, executive, general aviation, or special purpose applications on operational aircraft. Researches and develops new and improved chemical manufacturing processes. Designs chemical plant equipment and devises processes for manufacturing. Determines most effective arrangement of operations such as mixing, conditioning, application, and testing of related polymer products. Develops, implements, and maintains chemical processes;calculates and organizes all data for complex process flow sheets including instrumentation and control considerations; models processes and units operations. Confers with management to ensure proper sequence of operation and prepares specifications and operating instructions for processing equipment. Services, troubleshoots, and solves engineering problems with processes or equipment already in operation. Ensures processes and procedures are in compliance with regulations.
Conducts tests and measurements throughout stages of production to determine control over such variables as temperature, density, pressure and viscosity. May function as Project Manager on large projects or significant portions of very large projects. Provides technical leadership and oversight to the assigned engineering staff. May represent the Company to current or prospective customers or vendors on technical matters related to the job assignment or technical specialty.
Chemical Engineer Ancillary Job Functions and Responsibilities:
Perform other duties as required. These duties may include assignments in job classifications other than the primary assignment.
Chemical Engineer Job Qualifications:
Formal Education, Training, Professional Certification and
Chemical Engineer Work Experience:
Experience may be substituted for the formal education and training requirements in this section at the discretion of management. Technical Bachelor level degree in Engineering or the sciences or equivalent and six(6) years related experience and /or training; or equivalent combination of education and experience.
Level of Supervision Required:
Works under general direction. Receives guidance as to results expected and to resolve complex problems. Exercises latitude in determining activities and approaches within moderate to wide parameters. Standard Job Requirements:
•Must be able to arrive at work on time, work on-site, and attend regularly.
•Must be able to read and write technically in the English language, perform appropriate mathematical calculations and learn to interpret and comprehend company policies, procedures, safety instructions, and other like documents used in an aerospace manufacturing environment.
•Competent in the use of standard software applications such as Microsoft Word and Excel and operate standard office equipment.
•Make telephone and direct personal contact with internal and external personnel and make formal presentations
Chemical Engineer
.•May perform work of lesser skilled employees.
Special Job Requirements:
Experience and working knowledge of the following:
•Polymerization and casting of liquid methyl methacrylatemonomer
•Catalysts and cross-linking agents
•Filtration of liquid monomers
•Mechanical properties testing of polymers
•Adhesion promoters and surface primers
•Polymer coating so Polysiloxane and other protective coating so Electrically-conductive coating so Optical coatings for projection screens. Special Training:
•Safety training applicable to the job and the general work area.
Physical Requirements:
While performing the duties of this job, the Stakeholder is regularly required to sit; use hands to finger, handle, or feel; and talk and hear. The Stakeholder frequently is required to move from one place to another and reach with hands and arms. The Stakeholder must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, and ability to adjust focus. Travel between facilities. Must be able to work in excess of eight (8) hours per day and five (5) days per week, if required. Must be able to ascend and descend stairs. Work Environment :Must be able to tolerate exposure to dust, fumes, noise, temperature and other elements in the shop area, if required. The noise level in the work environment is usually moderate.
Mental Requirements:
Able to work as a team member, highly organized, work well under stress and handle multiple priorities. Must possess interpersonal and communication skills to interact with other people inside and outside the company.
The Structures Company, LLC is an AA/EOE.
 
Job Location: Tulsa, OK
Rate: "open"
Per Diem: yes
Overtime: "possible"
Duration: 12+ month
Start Date: asap
Input Date: 12/04/2017
Firm Name: STRUCTURES COMPANY LLC
Attention: Mark Sharp
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Circuit Card Assembly Specialist 2017-4708

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Circuit Card Assembly Specialist
(U.S. Citizenship Required*)
Must be able to work any shift
Huntsville, AL
2017-4708


Responsibilities:
• Performs all Circuit Card production assembly operations on electronic/electrical assemblies and subassemblies as an individual or as a member of a cross-functional, high performance work team.
• Performs simple rework and modification to circuit card parts and assemblies per requirements.
• Provides maintenance on machines and tooling and machine set up tasks to prepare machines for production activity following the machine inspection checklists.
• Documents results in accordance with applicable procedures.
• Collects and inputs data for statistical process control analysis.
• Perform CCA work using detail work instructions & other released planning documentation and a variety of other supporting technical documentation as required including but not limited to: CCA technical drawings, 2D & 3D models, schematics, circuit/wiring diagrams, process and equipment specifications, photographs, illustrations, and sketches.
• Perform all elements of CCA assembly, integration from detail fabrication to buildup of circuit card assemblies.
• Perform assigned work using any electrical and CCA related electronic test instrument, test equipment, measurement tool, required to trouble shoot at the CCA component level.
• Document CCA non-conformances down to component level. Perform, as required, approved CCA rework, modification, repairs and incorporation of changes per CCA technical documentation and formal direction to electrical, electronic and mechanical systems.
• Assist in defining, implementing, completing, and monitoring the execution of the work scope.
• Make recommendations for refinement to CCA equipment and integration processes by conducting studies and evaluations that result in product and process improvements.
• Analyze CCA product, processes, test data, and rejection history to identify root cause for problems and assist with developing corrective action.

Qualification:
• Basic Manufacturing Skills
• Basic Electricity
• Circuit Card Assembly (CCA) experience
• J-standard soldering certified
• Space addendum certified

*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
Work related skills equivalent to 3 years of circuit card related technical experience or a 2-year degree in electronics, mechanical or other technical discipline (or a minimum successful completion of all electronic courses contained with a 2-year electronics technical degree curriculum).

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!



TO APPLY, PLEASE VISIT OUR WEBSITE:
 
Job Number: 2017-4708
Job Location: Huntsville, AL
Duration: 6 Months
Input Date: 12/04/2017
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: https://careers-moseleytechnical.icims.com/jobs/4708/circuit-card-assembly-specialist/job?mode=view
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

Component Product Engineer (Project Engineer) / Rotating Machinery

Description:
Location: Jupiter, FL
Rate: $40.00 - $45.00/HR
Duration: 1 year contract

**Candidates must have an active Secret clearance or have had one within the last 2 years**

** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

Duties:
**Candidates must have an active Secret clearance or have had one within the last 2 years**
-Component Product Engineering (Project Engineering) in Rotating Machinery
-Candidates must have 6 to 9 years of experience
-This roll will not convert to a direct hire role unless circumstances significantly change

Skills:
Required:
**Candidates must have an active Secret clearance or have had one within the last 2 years**
-Candidates must have 6 to 9 years minimum experience working with manufacturing suppliers to fabrication aerospace quality hardware.
-Experience working with the design, analysis, and operations team.
-Ability to work effectively with the technical, business and program office team members regarding technical issues and component status.

Desired:
-Ability to provide leadership in the resolution of issues associated with the design, fabrication, schedule and procurement in order to meet program needs.

Education:
**Candidates must have an active Secret clearance or have had one within the last 2 years**
- BS Engineering or Equivalent BS degree
 
Job Number: 8145
Job Location: Jupiter, FL
Rate: $40.00 - $45.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 01/17/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

Component Product Engineer (Project Engineer) / Rotating Machinery with active secret FL

Description:
Job Title: Component Product Engineer (Project Engineer) / Rotating Machinery

Number of Positions: 1

Remaining Positions: 1

Duties:
** Candidates must have an active Secret clearance **



** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **



** Selected candidates for Jupiter, FL roles must be onboarded through one of these approved background check providers: EIS, First Advantage, Sterling or Talentwise. See attachment for specific background check onboarding requirements **





-Component Product Engineering (Project Engineering) in Rotating Machinery



-Candidates must have 6 to 9 years of experience



-This roll will not convert to a direct hire role unless circumstances significantly change





Key Words:

Turbomachinery, rotating machinery, design, fabrication, active secret clearance

Skills:
Required:

-Candidates must have 6 to 9 years minimum experience working with manufacturing suppliers to fabrication aerospace quality hardware.

-Experience working with the design, analysis, and operations team.

-Ability to work effectively with the technical, business and program office team members regarding technical issues and component status.



Desired:

-Ability to provide leadership in the resolution of issues associated with the design, fabrication, schedule and procurement in order to meet program needs.

Education:
BS Engineering or Equivalent BS degree


Skills:
Required

PROJECT ENGINEERAEROSPACEFABRICATIONACTIVE SECRET CLEARANCE

State/Province: Florida
City/Town: Jupiter

Start Date: 01/08/2018 Hours Per Week: 40.00
Est. End Date: 12/31/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7470352
Job Location: Jupiter, FL
Rate: 45/hr max
Duration: 12 month contract
Input Date: 01/23/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

Component Product Engineer (Project Engineer) II/III

Description:
Location: Canoga Park, CA
Rate: $35.00 - $48.00/HR
Duration: 6 month contract


** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


Duties:
**This is NOT a Designer role. Please make sure that all candidates with a Designer background or Designer expectations are aware of this. This is a Project Engineer role **
**Candidates should have 2 to 8 years of related work experience. No recent college graduates please**
**Position is for a Component Product Engineer for the development, fabrication and test of rocket engine system interconnect hardware**


Skills:
- 25%: Development and fabrication support of rocket engine components using engineering and scientific principles.
- 25%: Translates engineering and scientific concepts from preliminary ideas through product life cycle.
- 20%: Interfaces with other members of project or program teams, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
- 10%: Develops trade studies, design concepts, systems integration and component-level test plans.
- 10%: Supplier integration with external vendors
- 10%: Analyzes and verifies product design and performance for adequacy and reliability. Supports investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards or safety initiative activities.


Education:
- A Bachelor's degree in Mechanical or Aerospace Engineering.
- Candidates should have 2 to 8 years of related work experience. No recent college graduates please.
 
Job Number: 7819
Job Location: Canoga Park, CA
Rate: $35.00 - $48.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Input Date: 01/17/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

Component Product Engineer (Project Engineer) II/III / local preferred URGENT CA

Description:
160209/7333281

8 open positions

48/hr max

Manager is currently interviewing.

Job Title: Component Product Engineer (Project Engineer) II/III



Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **



** This is NOT a Designer role. Please make sure that all candidates with a Designer background or Designer expectations are aware of this. This is a Project Engineer role **



* Candidates should have 2 to 8 years of related work experience. No recent college graduates please *



Position is for a Component Product Engineer for the development, fabrication and test of rocket engine system interconnect hardware.

Skills:
25%: Development and fabrication support of rocket engine components using engineering and scientific principles.
25%: Translates engineering and scientific concepts from preliminary ideas through product life cycle.
20%: Interfaces with other members of project or program teams, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
10%: Develops trade studies, design concepts, systems integration and component-level test plans.
10%: Supplier integration with external vendors
10%: Analyzes and verifies product design and performance for adequacy and reliability. Supports investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards or safety initiative activities.

Education:
A Bachelor's degree in Mechanical or Aerospace Engineering.

Skills:
Required

PROJECT ENGINEER COMPONENT ENGINEERING

State/Province: California
City/Town: Canoga Park

Start Date: 09/11/2017 Hours Per Week: 40.00
Est. End Date: 03/11/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7333281
Job Location: Canoga Park, CA
Rate: 48/hr max
Duration: 6 month contract
Input Date: 01/23/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Component Product Engineer (Project Engineer) III / Rotating Machinery

Description:
Location: Canoga Park, CA
Rate: $40.00 - $45.00/HR
Duration: 6+ month contract


** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


Duties:
** These are Project Engineering roles with a focus on Fabrication **
** These rolls will not convert to a direct hire role unless circumstances significantly change **
** Candidates must have 6 to 9 years of experience **

Keywords:
-Turbomachinery
-Rotating machinery
-Design
-Fabrication

Skills:
Required:
-Candidates must have 6 to 9 years minimum experience working with manufacturing suppliers to fabrication aerospace quality hardware.
-Experience working with the design, analysis, and operations team.
-Ability to work effectively with the technical, business and program office team members regarding technical issues and component status.

Desired:
-Ability to provide leadership in the resolution of issues associated with the design, fabrication, schedule and procurement in order to meet program needs.


Education:
BS Engineering or Equivalent BS degree
 
Job Number: 8334
Job Location: Canoga Park, CA
Rate: $40.00 - $45.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6+ mos
Input Date: 01/17/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Component Product Engineer (Project Engineer) III / Rotating Machinery CA

Description:
7624480/7449330

Job Title: Component Product Engineer (Project Engineer) III / Rotating Machinery

Number of Positions: 1

Remaining Positions: 1

Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **



** These are Project Engineering roles with a focus on Fabrication **



** These rolls will not convert to a direct hire role unless circumstances significantly change **



** Candidates must have 6 to 9 years of experience **





Keywords:

-Turbomachinery

-Rotating machinery

-Design

-Fabrication

Skills:
Required:

-Candidates must have 6 to 9 years minimum experience working with manufacturing suppliers to fabrication aerospace quality hardware.

-Experience working with the design, analysis, and operations team.

-Ability to work effectively with the technical, business and program office team members regarding technical issues and component status.



Desired:

-Ability to provide leadership in the resolution of issues associated with the design, fabrication, schedule and procurement in order to meet program needs.



Education:
BS Engineering or Equivalent BS degree


Skills:
Required

PROJECT ENGINEER FABRICATION AEROSPACE

State/Province: California
City/Town: Canoga Park

Start Date: 12/11/2017 Hours Per Week: 40.00
Est. End Date: 09/30/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7624480
Job Location: Canoga Park, CA
Rate: 45/hr max
Duration: 9 month contract
Input Date: 01/23/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

Composite Technician (2) - CA

Description:
Chipton-Ross is seeking a Composite Technician (2) for an opening in Long Beach, CA.

RESPONSIBILITIES:
-Maintain high standards of safety, quality and output consistent with the requirements of being a client team member.
-Hand lay-up of composite parts in line with development and production requirements.
-Operate the fiber winding machine to support the fabrication of wound parts.
-Work with and provide input to the development and manufacturing engineers to improve part manufacturability.
-Trim and drill of composite parts in line with drawing requirements.
-Load and unload parts into ovens and ensure cure cycles are correct.
-Use of hand tools for the modifications of composite parts.
-Ability to operate a laser tracking system.
-Use of appropriate PPE when working around parts on the shop floor.
-Support the implementation of the ERP system on the shop floor and recommend changes as required.
-Recommend and implement continuous improvement activities in production methods, equipment performance and team effectiveness.
-Ability to train and lead team members, be willing to lead by example and jump in to help when required.
-Help client do its part to make the world a better place
-Constantly learn new things-and share them with your team members
-Performs other duties as assigned

REQUIRED EXPERIENCE:
-2 years prior experience in composite production is required.
-Knowledge of composite fabrication methods and techniques including filament winding, hand lay-up, compression molding and vartm.
-Experience with oven cure and autoclave cure.
-Demonstrated experience in new product introductions within aerospace, aviation or automotive.
-Knowledge and understanding of lean manufacturing.
-Ability to read and interpret engineering drawings and specifications.
-Ability to use metrology equipment to measure parts such as romer arm and bench inspection equipment.
-Ability and willingness to thrive in a fast-paced, rapidly changing work environment
-Driven, highly motivated, and committed to improvement
-Ability to add something unique and positive to our team
-Generally high level of all-around awesomeness
-Must be able to work all shifts and available for overtime as well as weekends when needed
-Must be able to stand for extended periods - 8 hours minimum
-Must be able to stoop, bend, crawl, and being able to maneuver in tight spaces
-Physically able to handle items weighing up to 40lbs (unassisted)

ADDITIONAL EXPERIENCE:
-Creative problem solver, able to work in multi-disciplinary teams.
-Self-directed with excellent organizational skills and problem-solving skills.
-Ability to work in both R&D and production rate environments.
-Passion for space exploration and a firm belief in the utility of affordable access to space
-Ability to thrive as a 'one person team'

EDUCATION:
"High school diploma or GED
-Certifications or similar within aerospace, aviation or automotive
-Graduated from a technical college or other recognized apprenticeship

WORK HOURS:
2nd Shift, Full-Time

 
Job Number: 164355
Job Location: Long Beach, CA
Rate: Up to $25.00 DOE
Duration: 6 Months
Input Date: 01/23/2018
Firm Name: CHIPTON ROSS
Attention: Christian Martinez-Salceda
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: cmartinez@chiptonross.com
Website: www.chiptonross.com

Contract & Pricing Admin 3 (2) - MO

Description:
Chipton-Ross is seeking 3 Contract & Pricing Administrators located in Hazelwood, MO.

RESPONSIBILITIES:
As member of acquire business and program business management teams, leads proposal development and negotiation and provides contracting expertise to develop and negotiate creative business solutions for R&D, advanced product development and new and follow-on business of moderate complexity. Represents the company to diverse customers, including U.S. Government entities and international customers and commercial space customers. Solely authorized to exercise commitment authority in negotiating and contracting for the sale or development of complex, high performance defense and aerospace products and services including aircraft, missiles, spacecraft and launch vehicles. Administers moderately complex contracts and agreements to ensure efficient, effective and compliant performance during the entire acquisition and product lifecycle including interpretation of contract requirements, risk management, change management, conflict resolution, delivery and payment for products and services. Establishes professional networks and customer rapport to facilitate company objectives and customer satisfaction. Provides contracts and pricing mentoring, technical and operational leadership across the enterprise. Partners in the development of business unit strategy and achievement of goals. This position works closely with External customers, Engineering, Procurement Financial Analysis, Financial Planning, Scheduling and other internal functional partners.

ADDITIONAL EXPERIENCE:
Knowledge: Completely understands and applies job practices, techniques, standards, principles, and concepts
Problem Solving: Develops solutions to a variety of complex problems referring to established precedents and policies.
Communication: Ability to communicate well across functions and all levels of management
Organized: Self-motivated and well organized in order to stay on top of assignments and proactively work issues

EDUCATION:
Accredited Bachelor's and typically 6 or more years related work experience, a Masters degree and typically 4 or more years related work experience or an equivalent combination of education and experience.

FULL TIME/FIRST SHIFT
WORK HOURS: 8:00 AM - 4:30 PM

 
Job Number: 166398
Job Location: Hazelwood, MO
Rate: $DOE
Duration: 12 Months
Input Date: 01/23/2018
Firm Name: CHIPTON ROSS
Attention: Patricia Padilla
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: ppadilla@chiptonross.com
Website: www.chiptonross.com

Contract & Pricing Admin 4- Secret

Description:
PDS Tech Inc is seeking a Contract & Pricing Admin for an open position in Huntsville, AL

As member of acquire business and program business management teams, leads proposal development and negotiation and provides contracting expertise to develop and negotiate complex creative business solutions for R&D, advanced product development and new and follow-on business. Represents the company to diverse customers, including U.S. Government entities and international customers and commercial space customers. Solely authorized to exercise commitment authority in negotiating and contracting for the sale or development of complex, high performance defense and aerospace products and services including aircraft, missiles, spacecraft and launch vehicles. Administers complex contracts and agreements to ensure efficient, effective and compliant performance during the entire acquisition and product lifecycle including interpretation of contract requirements, risk management, change management, conflict resolution, delivery and payment for products and services. Establishes professional networks and customer rapport to facilitate company objectives and customer satisfaction. Provides contracts and pricing mentoring, technical and operational leadership across the enterprise. Partners in the development of business unit strategy and achievement of goals.
Bachelor's degree and typically 10 or more years’ related work experience, a Master’s degree and typically 8 or more years’ related work experience or an equivalent combination of education and experience.
 
Job Number: 1710076376
Job Location: Huntsville, AL
Duration: 6 months
Input Date: 01/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Sheila Hernandez
Address: 3201 CHERRY RIDGE DR STE A103
City, State: SAN ANTONIO, TX 78230-4824
Phone: 210/524-1496
800 Phone: 866/570-1503
Email: cecjsanantonio@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023NKtAAM&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Contract Project Manager - Automotive - Vision Systems - Michigan area

Description:
Keltia Design, Inc. is a technical support services company in the supplying recruiting, training, and engineering design services to customers in the Automotive, Aerospace and other Hi-Tech industries on a permanent or contractual basis. We have been in business for over 17 years.

Our client has a range of openings in the area of Automotive Vision System Software Development. Experience with cameras, radars, ultrasonics, Deep Learning etc. is desired. The Project Manager must be a versatile, detail oriented person to assist managing a group of engineers and coordinate group activities to achieve delivery goals and targets in an efficient manner.

The Project Manager will facilitate the communication between the various engineering groups and ensure the customers requirements are being addressed.

It is important to be knowledgeable of the key elements of system, hardware and software engineering, have a great sense of detail, know how to take on various duties in a short time, and be able to take initiative when needed.

Requirements
a. Bachelor’s degree preferred. Computer Science, Computer Engineering or related.
b. Proficient with MS Office tools (Excel, WORD, MS Power Point, MS Project), Experience with cameras, radars, ultrasonics, Deep Learning etc. is preferable
c. Excellent interpersonal communication skills (excellent verbal and written skills).
d. Strong programming skill in high-level language

Please send an updated resume with pay requirements and availability. This is initially a contract role but there may also be the possibility to convert to a direct employee of the Client after this initial contract is complete
 
Job Number: KeltiaJ01217
Job Location: MI
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 12/18/2017
Firm Name: KELTIA DESIGN INC
Attention: John
Address: 2615 W CASINO RD UNIT 1A
City, State: EVERETT, WA 98204
Phone: 206/368-9812
Fax Phone: 206/237-8950
Website: www.keltia-design.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Contract Software Engineer - Automotive - Vision Systems - Michigan area

Description:
Keltia Design, Inc. is a technical support services company supplying recruiting, training, and engineering design services to customers in the Automotive, Aerospace and other Hi-Tech industries on a permanent or contractual basis. We have been in business for over 17 years.

Our client has a range of openings in the area of Automotive Vision System Software Development. Experience with cameras, radars, ultrasonics, Deep Learning etc. is desired. The Software Engineer must be a versatile, detail oriented person to assist in software design and development. The Software Engineer will be heavily engaged with engineering, program management, and customers. You must know the important elements of system, hardware and software engineering, have a great sense of detail, know how to take on various duties in a short time, and be able to take initiative when needed.

Responsibilities
a. Support software development planning.
b. Develop requirements, designs and implement the overall software structure of a project.
c. Verify that software design and coding meet the software and coding requirements.
d. Verify the accuracy and robustness of requirements and capability for validation.
e. Prepare software technical documentation as well as software design review materials.
f. Present materials at design reviews and be an active participant/team player at reviews.
g. Collaborate with system, hardware and software engineering peers to develop designs on aggressive time schedules when required.
h. Specify, design and code test tools using a combination of high level languages and hardware.

Requirements
a. Bachelor’s degree required. Computer Science, Computer Engineering or related.
b. Proficient with MS Office tools (Excel, WORD, MS Power Point, MS Project), Experience with cameras, radars, ultrasonics, Deep Learning etc. is desired
c. Excellent interpersonal communication skills (excellent verbal and written skills).
d. Strong programming skill in high-level language

Please send an updated resume with pay requirements and availability. This is initially a contract role but there may also be the possibility to convert to a direct employee of the Client after this initial contract is complete
 
Job Number: Keltia01217
Job Location: MI
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 6mo+
Start Date: ASAP
Input Date: 12/18/2017
Firm Name: KELTIA DESIGN INC
Attention: John
Address: 2615 W CASINO RD UNIT 1A
City, State: EVERETT, WA 98204
Phone: 206/368-9812
Fax Phone: 206/237-8950
Website: www.keltia-design.com

Contracts Specialist

Description:
Contracts Specialist

Location: Pomona, CA
Pay Rate: $30.95/hr
Duration: 6 month W2 contract
Shift: First, 8:00am – 5:00pm
**MUST be a U.S. CITIZEN**

This Company in Pomona is among the largest domestic suppliers of technologically advanced aerospace and defense sensing instrumentation. We design, develop, manufacture and support sophisticated sensors and analytical instruments for space, defense and homeland security applications. Our major products are space instruments, atmospheric monitors and chemical/biological detection systems.

JOB DESCRIPTION:
Pomona is seeking a motivated individual who is responsible for the negotiations and administration of contracts in support of the Company business.
Responsibilities include proposal support, negotiations, contract management of contract teaming agreements, etc. consisting of change management, accounts receivable, customer communications, export and import compliance, and contract closeout.

The candidate should demonstrate knowledge of negotiating and administering various contracts.
Must be familiar with and demonstrate an ability to review and provide comments of RFPs, RFIs, proposals and change proposals to minimize contractual risk.
Must ensure compliance with all regulatory requirements, with extensive experience in change management on various types of contracts.
Candidate must be able to work with Supply Chain to ensure contract requirements are successfully met.
Support the review of corporate documents, submissions, etc. for purposes of ensuring compliance with a variety of specific government regulations.

Education:
BS/BA in Management or related field

EXPERIENCE/QUALIFICATIONS:
7+ years experience in government and commercial contracting 5 years in government contract administration
Excellent communication skills, both written and oral
Ability to work independently
Strong negotiation skills are required as well as working knowledge of FAR/DFAR regulations.
Experience with SAP preferred.
Assist in leading group process improvements using our Company continuous improvement system (ACE), including the continued development of standard work for program management group processes.
Actively support the organization’s efforts to meet or exceed EH&S goals and plans, must comply with the EH&S Policy and applicable regulatory and company EH&S rules and requirements.
 
Job Number: 8349
Job Location: Pomona, CA
Rate: 30.95
Per Diem: No
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 01/17/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: rex@inconen.com
Website: www.inconen.com

Design & Analysis Engineer - CA

Description:
Chipton-Ross is seeking a Design & Analysis Engineer for an opening in Long Beach, CA.

RESPONSIBILITIES:
-Design the vehicle structural elements and configurations in concert with other engineering disciplines.
-Design of composite structures with attention towards high production manufacturing.
-Assistance in the development of manufacturing, integration, and test processes and procedures.
-Launch and mission operations support.
-Help client do its part to make the world a better place
-Constantly learn new things-and share them with your team members
-Performs other duties as assigned.

REQUIRED EXPERIENCE:
-2+ years of experience in an aerospace manufacturing environment
-Strong expertise in Finite Element Analysis using industry tools such as FEMAP, NASTRAN, and ANSYS.
-Strong skills in Geometric Dimensioning and Tolerancing drafting skills.
-Knowledge of the design, analysis, fabrication, and test of composite and metallic structures.
-Ability and willingness to thrive in a fast-paced, rapidly changing work environment
-Driven, highly motivated, and committed to improvement
-Ability to add something unique and positive to our team
-Generally high level of all-around awesomeness
-Must be able to work all shifts and available for overtime as well as weekends when needed

-Experience in NX/Teamcenter
-Experience in low cost commercial space system ventures
-Experience with air launched space launch
-Passion for space exploration and a firm belief in the utility of affordable access to space
-Ability to thrive as a 'one person team'

EDUCATION:
-Bachelor's Degree in Mechanical Engineering or Aerospace Engineering

WORK HOURS:
Full-Time

 
Job Number: 165852
Job Location: Long Beach, CA
Rate: $65000 to $98000.00 DOE
Duration: Perm
Input Date: 01/23/2018
Firm Name: CHIPTON ROSS
Attention: Christophor Long
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: clong@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Checker

Description:
All candidates must have a Bachelor’s degree to apply.

RESPONSIBILITIES
• Reviews Engineering design documents consisting of drawing, engineering order and parts list for consistency with company standards, design quality, requirements and its corrective interpretation.
• Also reviews 3D models used to produce 2D design are properly associated and provide repeatability and correct representation in the Digital Aircraft Model.
• Constant Interaction with Design teams to review/discuss issues and agree on acceptable solutions

TASKS
• Check Drawing, Engineering order and parts list for adherence to company standards.
• Check 3D information in CATIA and PLM System clearly describe and annotate issues found to designer and engineering design field
• Work with design team to solve issues identified
• Consult with design team and other checkers for interpretation provide inputs to management on major issues being identified and help develop alternatives for solutions

REQUIREMENTS
• 10 plus years of experience designing mechanical and/ or structural parts, assemblies or installations for aircraft
• 7 years of experience with CATIA and PLM Systems (preferably Teamcenter)
• 5 years of experience working with GD&T
• Very familiar with aircraft production and assembly methods
• BS Mechanical or Aerospace Engineering
• Experience with Composite materials a Plus
 
Job Number: 28-016
Job Location: Greensbo, NC
Rate: $48-$60 DOE
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 12/18/2017
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer

Description:
Design Engineer to support our engineering team delivering highly complex electro-mechanical, mechanical, and pneumatic components and systems for flight actuation applications to our Defense Sector customers.

Essential job functions:
• Perform conceptual design, analysis, assembly/detail drawing creation in NX, and test planning for complex control hardware used on military aircraft
• Validate conceptual problem solutions through trade studies and by applying sound engineering principles
• Perform engineering calculations related to sizing, performance, tolerance and assembly
• Participate in the evolution of conceptual design, technical project planning, detail design, and development testing throughout the program lifecycle
• Create reliable designs through a comprehensive experimental development test program
• Document designs, analyses, and test results with accurate and concise reports
• Team-oriented, with the desire to participate in and contribute to a high functioning team
• Self-starter with strong analytical skills and a desire for constant improvement

Required skills:
• 6+ years of design and development engineering experience
• Proficient in current versions of NX/UG computer-aided design software, 2 years experience minimum
• Good sense of three-dimensional spatial orientation and knowledge of mechanical hardware design
• Proficient in assembly/detail drawings, GD&T, and dimensional tolerance analysis

Education:
• Bachelor’s degree in Mechanical or Aerospace Engineering or related technical field
 
Job Number: 52852
Job Location: Salt Lake City, UT
Rate: Open
Per Diem: Yes
Duration: 6 months plus
Start Date: ASAP
Input Date: 12/06/2017
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Rich Nguyen
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

Design Engineer

Description:
Design Engineer

Independence, OH
1 Year Contract
$50.00-60.00/Hr

Summary: Reporting to the Design Lead, the successful candidate will be responsible for supporting detail design and drawing release in support of initial production. Model Based Definition (MBD) drawings shall be compatible with UTAS Landing Systems design methodologies, customer and industry/regulatory requirements and standard practices. The successful candidate will conduct trade studies, generate layouts, perform tolerance stack-ups, and detailed part design and formal drawing release.

Required Qualifications:
• BS in Mechanical or Aerospace Engineering with 8+ years of design experience with a background in mechanisms and hydraulics in aerospace field with work experience with electrical and hydraulic systems routings
• Minimum of 8 years of experience within the Aerospace industry; must include extensive experience in New Product Development of transport and / or military type aircraft components and assemblies . Knowledge of industry standard practices for systems routings. Understanding of requirements management and verification. Understanding of decomposition of system requirements and development of sub-system requirements. Understanding of qualification requirements electrical and hydraulic equipment. CATIA V5 - model based definition (FTA), kinematics, functional tolerance and annotation and drafting / interoperability. Working knowledge of Engineering PDM systems. In-depth knowledge of MS programs (Word, Excel, Project, PPT). Strong communication skills capable of engaging and working directly with suppliers. US citizen, permanent resident alien or able to review all export-controlled technical information. Experience with GD&T (ASME Y14.5) and familiar with ASME Y14.100 and Y14.41 Experience with Matrix One and SmarTeam PDM systems Working knowledge of materials and surface treatments Proficient with MS Word, Excel, and PPT
• Demonstrated ability to utilize Catia V5 with strong emphasis on functional tolerance and annotation module
• Strong interpersonal skills with demonstrated ability to maintain good working relationships with internal and external customers
• Successful candidates must meet all requirements under ITAR & CCGP
• Possess UTAS-LS Enterprise Values including Ethical Behavior, Customer Focused Improvement, Accountability & Teamwork and Openness & Trust
 
Job Number: 8266
Job Location: Indendence, OH
Rate: 50.00-60.00/Hr
Per Diem: No
Overtime: Possible
Duration: 1 Year
Start Date: ASAP
Input Date: 01/17/2018
Firm Name: INCONEN CORPORATION
Attention: Brad
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: brad@inconen.com
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer - Composites (Active Secret Clearance REQUIRED)

Description:
Job Title: Composite Structural Design Engineer
Location: Clearfield UT
Job Type: W2 - Contract
Duration: 1 Year, could be extended
Clearance: YES, must have last investigation completed within the past 4 years and 6 months
Schedule: 9/80, every other Friday off

Role description & Responsibilities: 
• Highly motivated design engineer with experience designing composite structures and assemblies for military and/or commercial aircraft.
• Responsibilities include but are not limited to the design of laminates, sandwich structures, and bonded and bolted assemblies.
• Skills should include relationally linked modeling, establishing datum schemes for assemblies, and performing tolerance stackup analysis. 

Experience Requirements: 
• BS in Engineering with a minimum of 10 years related experience in design engineering function 
• Minimum of 6 years of experience with Siemens NX or Catia V5 for component and assembly design 
• Experience leading a team of engineers 
• Assembly level design including establishment of data schemes and tolerance analysis 
• Knowledge of composite materials and manufacturing processes 
• Ability to work in a fast paced dynamic environment as part of a multi-discipline team 

Experience Preferred: 
• Definition of layups and ply patterns with Fibersim 
• CAD automation, programming, script writing 
• Previous experience in aerospace manufacturing facility 
 
Job Number: O6742917
Job Location: Clearfield, UT
Rate: Open
Per Diem: Split
Overtime: Yes
Duration: 12 months
Start Date: ASAP
Input Date: 11/29/2017
Firm Name: NESC STAFFING
Attention: Brad McInnis
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
Phone: 603/431-9740
800 Phone: 800/562-3463
Fax Phone: 800/637-2562
Website: www.nesc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer - Level 3 CREO CA

Description:
Job Title: Design Engineer - Level 3

Number of Positions: 5

Remaining Positions: 5

Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **



** Candidates must have significant experience with Creo and GD&T (Geometric Dimensioning & Tolerancing). Windchill experience strongly preferred **



** 6 years minimum of related experience as technical Design Engineer in rocket propulsion hardware or equivalent, and 6 years minimum of related experience as technical Designer using ProE/Creo CAD systems **



** Knowledge in the design of high pressure cryogenic, ambient and high temperature rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware is preferred **





Design Engineer - Must be able to create or modify designs of liquid rocket propulsion hardware associated to high pressure and high temperature static structures, combustion systems and high pressure valve systems.



Responsible for designing, developing and testing products including providing project time and cost estimate, product manufacturing and evaluation product for quality safety and cost.
Applies research to the planning design, development and testing of rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware.
Applies theories of heat and energy transfer to create practical solutions to technical problems
Responsible for damage tolerance, durability, design modeling, coordination with analysis disciplines.
Majority of work will be to develop and maintain component and assembly layouts, designs/CAD models, and drawings using Creo2 graphics system for liquid engine hardware.
Activities: conceptual design creation, design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, synthesis of higher level requirements to component level requirements. Conduct trade studies and develop schedules, test plans, component specifications and procedures.



Skills:
Candidates must have significant experience with Creo & GD&T. Higher level certifications are preferred.

Winchill experience strongly preferred.

Mechanical Design and development Engineers research, develop, analyze, design, and support fabrication of components using engineering and scientific principles.

Engineers are also required to analyze and verify product design and performance for adequacy and reliability.

Support or lead investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards and/or safety initiative activities.

Must be able to interface well with other members of project or program team, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.

Must be able to prepare and make presentations at both internal and customer design reviews.

Education:
BS degree in an Engineering field or equivalent. MS degree is desired.

Skills:
Required

AEROSPACE DESIGN CREO GEOMETRIC DIMENSIONING GEOMETRIC TOLERANCING WINDCHILL

State/Province: California
City/Town: Canoga Park

Start Date: 11/06/2017 Hours Per Week: 40.00
Est. End Date: 06/30/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7455592
Job Location: Canoga Park, CA
Rate: 45/hr max
Duration: 7 month contract
Input Date: 01/16/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Design Engineer - Level 4 CREO / BS required URGENT CA

Description:
7455575
Job Title: Design Engineer - Level 4
60-65/hr max

Number of Positions: 15

Remaining Positions: 5

Please note that a BS degree is required.

Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **



** Candidates must have significant experience with Creo and GD&T (Geometric Dimensioning & Tolerencing). Windchill experience strongly preferred.



** 10 years minimum of related experience as technical Design Engineer in rocket propulsion hardware or equivalent, and 10 years minimum of related experience as technical Designer using ProE/Creo CAD systems **



** Knowledge in the design of high pressure cryogenic, ambient and high temperature rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware is preferred **


Creo
GD&T
5+ years “Design” experience, however drafting skills a plus
BS in Engineering or related field
Prefer: Windchill, and Rocket Design experience.



Design Engineer - Must be able to create or modify designs of liquid rocket propulsion hardware associated to high pressure and high temperature static structures, combustion systems and high pressure valve systems.

Responsible for designing, developing and testing products including providing project time and cost estimate, product manufacturing and evaluation product for quality safety and cost.
Applies research to the planning design, development and testing of rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware.
Applies theories of heat and energy transfer to create practical solutions to technical problems
Responsible for damage tolerance, durability, design modeling, coordination with analysis disciplines.
Majority of work will be to develop and maintain component and assembly layouts, designs/CAD models, and drawings using Creo2 graphics system for liquid engine hardware.
Activities: conceptual design creation, design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, synthesis of higher level requirements to component level requirements. Conduct trade studies and develop schedules, test plans, component specifications and procedures.



Skills:
Candidates must have significant experience with Creo & GD&T. Higher level certifications are preferred.
Winchill experience strongly preferred.
Mechanical Design and development Engineers research, develop, analyze, design, and support fabrication of components using engineering and scientific principles.
Engineers are also required to analyze and verify product design and performance for adequacy and reliability.
Support or lead investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards and/or safety initiative activities.
Must be able to interface well with other members of project or program team, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
Must be able to prepare and make presentations at both internal and customer design reviews.

Education:
BS degree in an Engineering field or equivalent. MS degree is desired.


Skills:
Required

AEROSPACE DESIGN CREO GEOMETRIC DIMENSIONING GEOMETRIC TOLERANCING WINDCHILL


State/Province: California
City/Town: Canoga Park


Start Date: 11/06/2017 Hours Per Week: 40.00
Est. End Date: 09/30/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7455575
Job Location: Canoga Park, CA
Rate: 60-65/hr max
Duration: 10 month contract
Input Date: 01/23/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer II

Description:
Position Summary: This position will work with the engineering team and will ensure the successful integration of each design element with the product as a whole. This individual will work both independently as well as part of the larger engineering team. Tasks will include the development of aircraft structural layouts and the design of individual components, assemblies, and installations. Engineering materials will include metals, nonmetals, and composite structural materials. Tasking may also include design and integration of aircraft mechanical systems, hydraulic systems, electrical systems, environmental control systems and a variety of other equipment and systems as needed. Specific duties and responsibilities include but are not limited to the following:

Essential Duties and Responsibilities:

The Design Engineer II will work with minimal intervention and must rely on experience and judgment to plan and accomplish goals while performing a variety of complex tasks in the following areas:

Applies standard engineering practices and techniques, including innovative methodology, to provide effective solutions to problems involving a wide number of variables.

Able to ensure the selection and application of materials and processes are appropriate to each design element with the ability to generate and/or revise specifications when necessary.

Compose compliance matrix to meet customer specification requirements.

In-depth knowledge of standard concepts, practices, and procedures within a specified engineering field.

Proficiency utilizing CATIA V5 engineering design software.

Works on problems of complex scope where analysis of situation or data requires a review of identifiable factors to determine appropriate action.

Ability to guide, mentor and advise other design engineering staff.

Creativity and latitude is expected.

Participate in a variety of process improvement projects.

Able to support design reviews with timely and relevant information and understanding.

Performs other duties as required.

Qualifications & Skills Requirements:

Requires a BSME, BSCE, BSAE, or a Bachelor’s degree in a related engineering field and a minimum of 5-9 years of experience in the Aerospace Industry or in a related field.
Requires proficiency using CATIA V5 and must be highly competent using MS Office products.

Physical Requirements: Individual must be able to sit for extended periods of time, working at a desk and/or attending meetings. May occasionally require employee to stand and/or walk and occasionally lift and/or move up to 10 pounds. Will need to be able to move throughout the office and talk/hear or otherwise communicate with other employees and management. Work will be performed in an office environment. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential duties of the job.

LMI is an equal employment opportunity employer. Consistent with applicable law, LMI provides access and opportunities to those with disabilities. This includes providing reasonable accommodation to individuals with disabilities and disabled veterans who seek to access the company’s online application system. If an applicant is unable to fully access the online application system, LMI will provide a reasonable accommodation. Applicants with disabilities may contact us at 636-916-2400 for assistance accessing the on-line application system. Callers should have a detailed description of the requested accommodation, their name and preferred method of contact ready for LMI‘s Human Resources Department. LMI will make every effort to respond within two (2) business days. This phone number is not for the general submission of application materials.

LMI is an E-Verify Employer.

LMI is an Equal Employment Opportunity/Affirmative Action/Disability/Veterans Employer


Click the link and follow instructions on HOW TO APPLY: LMI ENGINEERING JOB OPPORTUNITIES
 

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer NX UT

Description:
Request number: 5051
Job title: Design Engineer

Number of openings: 1
Position location: Salt Lake - UT
Employment type: Contract
OT exempt: No
Shift: 1st
Education Requirement: BS/BA
Driving on company time?: No
Minimum Years of Experience: 6 years Maximum
Hourly Pay Rate: 60
Start Date: 12/04/2017
Tentative End Date: 06/04/2018

Job Description
Function: **This position is a 6-12 month contract with potential of transitioning to full time direct employment.**


Moog Space and Defense Group in Salt Lake City is looking for a Design Engineer to support our engineering team delivering highly complex electro-mechanical, mechanical, and pneumatic components and systems for flight actuation applications to our Defense Sector customers. A Design Engineer at Moog will contribute to design support of some of the most sought after missile systems in the defense industry.

Essential job functions:
• Perform conceptual design, analysis, assembly/detail drawing creation in NX, and test planning for complex control hardware used on military aircraft
• Validate conceptual problem solutions through trade studies and by applying sound engineering principles
• Perform engineering calculations related to sizing, performance, tolerance and assembly
• Participate in the evolution of conceptual design, technical project planning, detail design, and development testing throughout the program lifecycle
• Represent Moog in a manner consistent with its leading-edge technical reputation
• Create reliable designs through a comprehensive experimental development test program
• Document designs, analyses, and test results with accurate and concise reports
• Team-oriented, with the desire to participate in and contribute to a high functioning team
• Self-starter with strong analytical skills and a desire for constant improvement
Required skills:
• 6+ years of design and development engineering experience
• Proficient in current versions of NX/UG computer-aided design software, 2 years experience minimum
• Good sense of three-dimensional spatial orientation and knowledge of mechanical hardware design
• Proficient in assembly/detail drawings, GD&T, and dimensional tolerance analysis


Education:
• Bachelor’s degree in Mechanical or Aerospace Engineering or related technical field
 
Job Number: JE-5051
Job Location: Salt Lake City, UT
Rate: 60/hr max
Duration: 6-12 month contract with potential of transitioning to full time direct employment
Input Date: 01/02/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Design Engineer, Flight Test Instrumentation

Description:
Our client in Greensboro, NC is seeking Flight Test Instrumentation Design Engineers

General Summary:
The Flight Test Instrumentation Design Engineer position is responsible for the design, development, and coordination equipment to support Flight Test operations.
 
Duties and Responsibilities:
  1. Designs, develops, coordinates, equipment, and Installations, to support Flight Test operations.  Typical equipment and installations including ballast, data booms, cockpit displays, antennas, racks, and various transducers (acceleration, pressure, temperature, displacement, etc.).
  2. Creates engineering drawings and related documents for soundness, efficiency, and simplicity in design; completeness, clarity, and dimensional accuracy; correctness of materials and processes; conformity to design/drafting standards, design specifications, and practicability; and economy of fabrication, assembly, and installation.
  3. Supports fabrication and installation of test equipment.
  4. Resolves issues related to design, documentation, procurement, fabrication, and installation.
  5. Coordinates designs for Instrumentation Installations.
  6. Monitors installation progress for support of upcoming flights.
  7. Coordinates aircraft configuration with the Ground Station which will require operational testing out of the Greensboro facility as well as off-site testing as required.
  8. Designs structural products and components of products to support Flight Test Instrumentation.
  9. Performs other duties as assigned.


Education, Work Experience, Certification and/or Licensure:
  1. Bachelors’ degree in Aerospace Engineering, Electrical Engineering, Engineering Technology other related field preferred.
  2. 5+ years of directly related experience.

Knowledge, Skills and Abilities:

  1. Proficiency in 3D multiple component designs and 2D fully dimensional and tolerance drawings.  CATIA V5, PLM systems, TeamCenter strongly preferred.
  2. Strong Microsoft Office Suites (Word, Excel, and PowerPoint) strongly preferred.
  3. Strong computer operating systems skills.
  4. Excellent oral and written communication skills.
  5. Excellent interpersonal skills.
  6. Experience with aircraft data acquisition systems.
  7. Experience with FAA regulations.
  8. Excellent analytical skills.

Physical Requirements:

  1. Incumbents may be routinely exposed to equipment operational noise heat-cold-dust, and/or aircraft equipment, parts, or fuel odors.
  2. Incumbents may be required to stand, sit, squat, walk, bend, move, reach, or stretch for prolonged time periods with no restrictions, as required by job duties.
  3. Work in a safe and professional manner while adhering to all regulatory requirements (FAA, OSHA, DOT, EPA, State, and Federal regulations, etc.).
  4. Read, hear, speak, and see with no restrictions, as required by job duties.
  5. Comprehend and adhere to management directions and/or safety instructions with no restrictions.
  6. Effectively communicate in Business English language.
  7. Pull, push, carry, lift, or move items up to 10 lbs. throughout the work shift without assistance, as required by job duties.
  8. Pull, push, carry, lift or move materials/people/items/equipment weighing up to 50lbs or more during the work shift, with the use of Company provided “reach assistance technology” or “movement assist technology” (fork-lifts, pallet jacks, pulleys, dolly’s, robotics reach equipment, people movers etc.), as required by job duties.


PDS Tech, Inc. is an Equal Opportunity Employer and will not discriminate against applicants on the basis of race, color, religion, sexual orientation, gender identity, national origin, veteran status, or disability.
 
Job Number: 1610060142
Job Location: Greensboro, NC
Duration: 12 months
Input Date: 01/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Earl Sawyer
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002Fth3AAC&URLSource=cjhunter

Director of Customer Service Engineering

Description:

PDS Tech is seeking candidates for Director of Customer Service Engineering for the Regional Jet Program.
This position is located in Nagoya, Japan.



Job Description



The Customer Support Director of Service Engineering is responsible for providing in-service technical support to customer airlines, leasing companies and authorized MROs for the servicing, repair, and continued safe operations of aircraft.  The Service Engineering team supporting the Fleet Management organization is the primary interface to address all reliability and maintainability issues for the fleet.  Additionally the Director of Service Engineering has prime responsibility for the  24x7 Operations Center which provides Customers and MROs with round the clock technical support to resolve AOGs and address performance deterioration which may impact operations as detected through Aircraft Health Monitoring.  Service Engineering will work closely with Design Engineering and Regulatory Authorities to resolve in-service issues and improve fleet performance through the coordination and authoring of Service Bulletins and 8110 Authorized Repairs.  Responsibilities include establishing deliverable commitments, establishing work priorities, creating the team and team structure, implementing work processes and process standards, implementing governance and communication processes, and the technical performance of the group.



 



Scope of Work



Processes



  • Implement the Service Request processes and tools required to receive technical questions from customers, and coordinate and approve a timely, quality response.  Create an archive of technical issues and responses.
  • Review every incoming technical request from each customer for its potential safety implication.  Any potential safety issue will be coordinated with the Fleet Chief who will initiate the Lead Airline Process if required.  The potential safety issue will be input into the 21-3 Continued Airworthiness Safety process.
  • Answer technical questions (e.g. “How does this system work?”, “We want to do [X], what will be the impact and is this acceptable?”, “Please confirm our understanding of the [X] document that the [part description] for our aircraft serial number [123] is part number [xyz]”).  Coordination with Design Engineering and Suppliers as necessary.
  • Provide “fix” or “replace” recommendations based on cost and flow time.
  • Provide structural repair instructions and regulatory approvals (i.e. JCAB, FAA, EASA) for the repair when appropriate (e.g., 8110-9).
  • Participate in the Fleet Improvement Process (FIP) as directed by the MRJ Fleet Chief to identify solutions to chronic reliability performance issues and develop solutions for permanent fixes in both delivered and future production aircraft.
  • Coordinate with Design Engineering and Suppliers as required to solve “in service problems”.
  • Coordinate with Engineering and Suppliers on design changes necessary to retrofit delivered aircraft and improve future production aircraft based upon service experience or potential airworthiness issues identified during fleet operations.
  • With Design Engineering develop bill of material and work instruction content material for the accomplishment of Service Bulletins which is then provided to Service Bulletin technical writers for incorporation in forthcoming fleet Service Bulletins
  • Support the Continued Airworthiness Process, Safety Review Process (SRP) and Flight Safety Review Board.
  • Interact with Field Service and Operations Center (OPC) personnel to assist and address support issues or needs identified by either group.
  • Support AOG and Field Repair teams with on-site engineering support during aircraft recovery operations as requested by the field repair team.


The primary deliverables of Service Engineering include:



  • Completed Service Requests as entered in the Customer Portal in accordance with established KPIs.
  • Repair instructions and regulatory approvals for repairs not covered by existing approved repair manuals (SRM).
  • Updates to the Fleet Improvement Team Digest based upon progress and status both Safety and Non-Safety SRP’s.
  • Service Bulletin work instruction content material.
  • Service Letters that provide important technical and maintenance information to the airlines.  Note, a Service Letter does not authorize an airline to modify an airplane (it is not a regulatory approved document.) 
  • Skilled employees that will form the Service Engineering team, staff the Operations Center, and staff the Field Service team.


Job Requirements:



The Central Service Engineering functions will be performed primarily in Komaki and an Operations Center that is staffed and directly interfaces with Service Engineering will be staffed 24/7/365 to support operations worldwide.



 




    Education/Experience and Skills:



    1. Qualified candidates must hold an engineering degree from an accredited Engineering School.
    2. Candidates must have worked in commercial aerospace for an Original Equipment Manufacturer (OEM), and have 5 or more years in senior leadership positions providing Service Engineering functions to commercial airline customers.
    3. Candidates must have Regulatory (FAA/EASA/JCAB) coordination experience.
    4. Candidates must have skills and experience managing Suppliers.

     
    Job Number: 1710063873
    Job Location: Nagoya,
    Duration: 24 months
    Input Date: 01/23/2018
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Lucinda Contreras
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: http://jobs.pdstech.com/job-detail?id=a1i50000002GKH0AAO&URLSource=cjhunter

    Director of Technical Publications

    Description:

    PDS Tech is seeking candidates for Director of Technical Publications for the Regional Jet Program.
    The primary work location will be Seattle, Washington, USA, with travel required to Nagoya, Japan.



    Job Description



    The Customer Support Director of Technical Publications is responsible for the Development, Verification & Validation, Certification Approval, Publication and Revision of all maintenance and repair documents for the program to ensure the aircraft can be maintained in an airworthy condition as designed by Engineering and approved by regulatory authorities.  Responsibilities include establishing deliverable commitments, establishing work priorities, creating and managing the development process, creating the team (including 3rdparties required to supplement staff) and team structure, implementing governance and communication processes, and the performance of the group.



     



    Scope of Work



    Processes:



    • Implement the processes and tools required to author, publish and revise all maintenance and repair documents in accordance with industry standards.
    • Manage the document development process to meet program schedule milestones.
    • Establish and manage 3rd parties required to supplement the staff.
    • Coordinate with Design Engineering and Suppliers to obtain technical information and content required to meet industry standards for document scope and content.
    • Author and publish all Instructions for Continuing Airworthiness (ICA) documents (see Deliverables and Products section for a list of ICA documents) and other industry standard manuals required for maintenance and repair of the fleet.
    • Establish the document revision process required to incorporate changes from Design Engineering as well as Customer Originated Change (COC) requests (e.g. Engineering Orders, SB accomplishment, implemented Supplemental Type Certificates, etc.).
    • Review and accept Component Maintenance Manuals (CMM) produced by Partners.
    • Author and publish Service Bulletins originating from the Airplane Change Process


    “Authoring” as described above include the development of maintenance procedures, safety warnings, cautions & notes, access identification, remove/replace instructions, and test procedures.  All documents produced by this group’s activities must conform to strict formatting and publishing standards as defined by ATA S1000D and other adopted industry specifications.  Documents are revision controlled to include highlight sheets, list of effective pages, revision bars, and distributed in both PDF and SGML (selected documents only) upon approval by the required regulatory authority as applicable.



     



    The primary deliverables of Technical Publications include:



    • Service Bulletins
    • Maintenance Tips
    • Aircraft Maintenance Manual (AMM)
    • Fault Isolation Manual (FIM)
    • Aircraft Recovery Manual (ARM)
    • Standard Wiring Practice Manuals (SWPM)
    • Wiring Diagram Manual (WDM)
    • System Schematic Manual (SSM)
    • Structural Repair Manual (SRM)
    • Aircraft Illustrated Parts Catalog (AIPC)
    • Corrosion Prevention Manual (CPM)
    • Non Destructive Test Manual (NDTM)
    • Maintenance Planning Document (MPD)
    • Maintenance Review Board Report (MRBR)
    • Maintenance Task Cards (MTC)
    • Illustrated Tool & Equipment Manual (ITEM)
    • Maintenance Facilities and Equipment (MFEPM)
    • Component Maintenance Manuals (CMM) –  Proprietary Parts


    The Technical Publications function will be performed both in Seattle, WA and Komaki, Japan.  Third parties will be used for the initial document creation process as the permanent team is formed and capabilities are implemented.



     






        Expected Education/Experience and Skills:



        1. Qualified candidates must hold an engineering degree from an accredited Engineering School.
        2. Candidates must have worked in commercial aerospace for an Original Equipment Manufacturer (OEM), and have 5 or more years in senior leadership positions providing Technical Publication functions to commercial airline customers.
        3. Candidates must be familiar iSpec2200 and S1000D and have participated in technical publication Industry Standards groups.
        4. Candidates must have skills and experience managing Suppliers.

         
        Job Number: 1710063876
        Job Location: Seattle, WA
        Duration: 24 months
        Input Date: 01/23/2018
        Firm Name: PDS TECHNICAL SERVICES
        Attention: Lucinda Contreras
        Address: 300 E JOHN CARPENTER FWY STE 700
        City, State: IRVING, TX 75062
        Phone: 214/647-9600
        800 Phone: 800/270-4737
        Fax Phone: 214/647-9630
        Website: http://jobs.pdstech.com/job-detail?id=a1i50000002GKHPAA4&URLSource=cjhunter

        Director, Spare Parts Management

        Description:
        Legacy Engineering, a division of PDS Tech, is seeking candidates for Director, Spare Parts Management, Customer Support Division for the Regional Jet Development Program. 
        This position is located in Nagoya, Japan.  

        In this role, you will be responsible for managing a profitable, world-wide spare parts service for the Aircraft. Spare parts services will include but not be limited to parts provisioning and sales, tailored parts pooling services, lease and repair services. This leader is also responsible for establishing the processes and organization necessary to create and deliver these services.  Processes will include provisioning planning, inventory planning, setting up of warehouse and distribution channels, export/import control, customer AOG and sales support, quality management, and others as necessary.  These services should meet the expectations of customers ensuring the aircraft is cost competitive and can be maintained in an airworthy condition as designed by Engineering and approved by regulatory authorities. Responsibilities include but are not limited to establishing deliverable commitments, establishing work priorities, creating and managing the development processes, creating the team and team structure, implementing governance and communication processes, and evaluating the performance of the group.


        The Primary Work Location will be Nagoya, Japan.  Travel to USA or other country will be required.

        Scope of Work
        Develop the following processes and capabilities related to spare parts management:

        •   Phased Provisioning          

          • Recommended Spare Parts List (RSPL)

        •   Spares sales        
          • Proprietary and partner parts
          • Parts catalog
          • Quotation

        •   Leasing Services & management
        •   Repair Services & management
        •   24/7/365 – AOG Desk        
        •   Inventory planning & demand forecasting
        •   Inventory management for new parts & Company repairable assets  
        •   AS 9120 certified Logistics Service Centers     
        •   Management of 3PL (3rd Party Logistics) warehouse and distribution provider
        •   Supplier Management
        •   Customer account management
        • Spares Engineering management to oversee part interchangeability and kitting services
        • Tailored MRO and spares support programs                 
        • Handling of dangerous materials                     
        • Insurance Parts management

        The Spares management function will be performed in Nagoya, Japan.  Third parties will be used for logistics in Japan, North America and Europe.  Company will use SAP as their ERP system.  This system will control spares ordering and fulfillment processes.  Familiarity with SAP is a benefit.  The Spares team has partnered with The Boeing Company - Spares Engineering to develop customer provisioning data and inventory recommendations.
         

        Expected Education/Experience and Skills:



        1. Qualified candidates must hold an engineering degree from an accredited Engineering School.
        2. Candidates must have worked in commercial aerospace for an Original Equipment Manufacturer (OEM), and have 5 or more years in managerial positions providing spare parts management functions to commercial airline customers.
        3. Candidates must have skills and experience managing Suppliers.

         
        Job Number: 1710068576
        Job Location: Nagoya,
        Duration: 36 months
        Input Date: 01/23/2018
        Firm Name: PDS TECHNICAL SERVICES
        Attention: Lucinda Contreras
        Address: 300 E JOHN CARPENTER FWY STE 700
        City, State: IRVING, TX 75062
        Phone: 214/647-9600
        800 Phone: 800/270-4737
        Fax Phone: 214/647-9630
        Website: http://jobs.pdstech.com/job-detail?id=a1i50000002JqSgAAK&URLSource=cjhunter

        Director, Training & Flight Operations

        Description:
        Legacy Engineering, a division of PDS Tech, is seeking candidates for Director, Training & Flight Operations, Customer Support Division for the Regional Jet Development Program. 
        This position is located in Nagoya, Japan.  

        In this role, you will be responsible for the development and delivery of Regional Jet Customer training, flight manuals and flight operations engineering support. 



        • Training services include the development of courseware, training devices, training manuals and delivery of initial and recurrent training for Pilots, Technical/Mechanics, Cabin Crews, Ground Servicing Crews, and Dispatchers within an airline. In addition, this person must manage the relationship and performance of CAE, the Company's selected training service provider. 
        • Development, verification/validation and certification of flight operations manuals
        • Flight Operations Engineering support to Company's customers


        Responsibilities include establishing deliverable commitments, establishing work priorities, creating and managing the development process, creating the team and team structure, implementing governance and communication processes, and evaluating the performance of the group.


        Work Location
        The Primary Work Location will be Nagoya, Japan.  Travel to USA or other country will be required.

        Scope of Work
        Specific Training responsibilities include:

        • Overall management of the relationship with and performance of CAE, Company’s training services provider, ensuring training devices and services are high quality at market prices
        • Development and maintenance of training curriculum and courseware for pilots, technicians/mechanics, flight attendants, and flight planning engineers, and ground handling services
        • Development and maintenance of training documentation for each course offered
        • Ensure there are sufficient qualified training instructors located at training delivery sites for the life of the aircraft
        • Ensure training devices (e.g., Full Flight Simulators (FFS), Integrated Procedures Trainers (IPT), Virtual Maintenance Trainers (VMT), Computer Based Training (CBT), Door Trainer and Cabin Trainers) & training facilities meet training objectives and are certified (where applicable) by regulators
        • Obtain regulator certifications such as OSD, FSB, etc.
        • Commitment of training services (both proforma and for fee) to customers as part of the airplane sales process
        • Scheduling customer training at a location that minimizes customer travel costs, meets customer requirements for timing (schedule), and fits within the Company's Training Program strategy.

         
        Specific Flight Operations Support responsibilities include:

        • Define the process interfaces with Flight Test organization, Pilot organization and Flight operation engineering organization. 
        • Development, verification/validation, maintenance and delivery of all technical and administrative documents in support of customer’s flight operations.
          • Airplane Flight Manual (AFM)
          • Flight Crew Operating Manual (FCOM)
          • Quick Reference Handbook (QRH)
          • Weight & Balance Manual (WBM)
          • Master Minimum Equipment List (MMEL)
          • Dispatch Deviation Guide (DDG)
          • Flight Crew Training Manual (FCTM)
          • Cabin Crew Operating Manual (CCOM)
          • Aircraft Characteristics for Airport Planning (AC)



        • Ensure documents meet industry standards for content and format by participating in and influencing industry standards board that define flight operations documentation requirements
        • Create airplane performance databases and may provide specialized training courses to customers to assist them in their understanding and use of the airplane and documents listed above.  Such courses may include:
          • Performance Engineers course
          • Weight & Balance course

        • Review and approve requests from airlines for non-normal operations such as flight with missing secondary structure
        • Respond to Flight Operations related Customer Service Requests.  Utilize the Safety Process for emergent Flight Operations related Safety issues.
        • Prepare and Release Flight Operations Bulletins.  MITAC must define both a Routine bulletin type as well as an Alert bulletin type to correspond to the Maintenance related Service Bulletins
        • Define a change process that addresses Flight Operations related changes that may impact the certification basis of the airplane (e.g. Airplane Flight Manual)

        Expected Education/Experience and Skills:



        1. Qualified candidates must hold an engineering degree from an accredited Engineering School.
        2. Candidates must have worked in commercial aerospace for an Original Equipment Manufacturer (OEM), and have 5 or more years in managerial positions providing Training and/or Flight Operations management functions to commercial airline customers.
        3. Commercial pilots license preferred.
        4. Candidates must have skills and experience managing Partners and Suppliers.

         
        Job Number: 1710068573
        Job Location: Nagoya,
        Duration: 36 months
        Input Date: 01/23/2018
        Firm Name: PDS TECHNICAL SERVICES
        Attention: Chad Dunavant
        Address: 300 E JOHN CARPENTER FWY STE 700
        City, State: IRVING, TX 75062
        Phone: 214/647-9600
        800 Phone: 800/270-4737
        Fax Phone: 214/647-9630
        Website: http://jobs.pdstech.com/job-detail?id=a1i50000002JqSMAA0&URLSource=cjhunter

        EVMS Compliance Analyst - SECRET

        Description:
        PDS Tech, Inc. is seeking a EVMS Compliance Financial Analyst with active secret clearance in Hazelwood, MO. 

        Job Purpose


        The EVMS Compliance Analyst is responsible for ensuring compliance with EVM requirements for a large DOD program. This includes applying project management oversight to assigned projects, developing/designing and implementing new or revised departmental policies, programs, techniques, and methods. Provide financial and scheduling guidance to Program Management teams through the EV Core Team. Position requires a working knowledge of the Earned Value Management (EVM) Industry Standard, ANSI/EIA 748 (current version) and applicable DCAA/DCMA requirements.

        Principal Accountabilities



        1. Supports program teams in the development and preparation of program baselines and financial forecasts, estimate at complete (EAC) development and reviews, preparation of financial packages, EVMS reporting and compliance support, audit support, baseline development and internal integrated baseline reviews, financial and investigative analysis, and real-time information and analysis to PMs, CAMs and Finance Management
        2. Closely supports PM team and collaborates with other functions including scheduling, contracts, procurement and central finance
        3. Leads and mentors financial analysts and program master schedulers
        4. Supports AAI EVMS policy, process, tools, training and performance assessment in accordance with ANSI EVMS 32 guidelines
        5. Provides specialized EVM analysis and develops specialized reports using analytical tools as required
        6. Earned Value Management System (EVMS) analysis, maintenance and reporting
        7. Develop and integrate tiered master plans & schedules on DOD programs
        8. Lead multi-schedule implementations and develop cross project linking solutions
        9. Interact heavily with external customer and subs
        10. Conduct expert level internal training sessions
        11. Extensive experience working on government DoD programs developing Integrated Master Plans & Integrated Master Schedules (IMS) is required.
        12. Advanced experience with multiple scheduling tools and add-ons
        13. Advanced skills with Microsoft Project
        14. Proven ability to work with a server based MRP system with EVMS linkages
        15. Solid experience with cost & schedule integration
        16. Solid experience with EVMS – Successfully developed EV solutions in IMP’s/IMS’s

        Education
        Bachelor’s degree in Accounting, Finance, Business Administration, or equivalent degree or 5 years of experience in EVM scheduling in lieu of degree.  MBA, CMA or CPA preferred.
         
        Qualifications
        • 6 years combined experience in Finance and EVM Scheduling.
        • Previous Control Account Manager and/or Program Manager experience is preferred.
        • Experience with budget development, variance analysis, estimates to complete, cost performance reports, and cost schedule status reports in an integrated product team environment is preferred.
        • Hands-on experience with EVM software.
        • Requires excellent communication skills and the ability to interface with all levels of the organization.
        • Must be capable of working under pressure to meet deadlines. 
        • Ability to perform financial analysis and familiar with Windows suite.
        • Prior experience in project control and/or government contracting is highly preferred. Strong communication skills, ability to work well with others, focus on long-term goals and provide leadership to support staff. 
        • Excellent PC skills in Windows Suite required.
        • Experience with Business Planning Systems
        • Prior experience in DoD or Aerospace
        • Clearance required:  Secret or have the ability to obtain a Secret level clearance

        DOD Secret Clearance is required. 
         
        Job Number: 1710073099
        Job Location: Hazelwood, MO
        Per Diem: Yes
        Duration: 9 months
        Input Date: 01/23/2018
        Firm Name: PDS TECHNICAL SERVICES
        Attention: Jamie Tedford
        Address: 1839 S ALMA SCHOOL RD STE 250
        City, State: MESA, AZ 85210
        Phone: 480/929-9922
        800 Phone: 800/657-0997
        Fax Phone: 480/929-9779
        Email: cecjphoenix@pdstech.com
        Website: http://jobs.pdstech.com/job-detail?id=a1i500000023FOqAAM&URLSource=cjhunter

        Electrical (EWIS) Design Engineer - Catia V5

        Description:
        Position Purpose:
        Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Company products and services

        Essential Functions:
        1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
        2. Is consulted extensively by associates and others as a recognized authority within the field
        3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
        4. Approach to problem solving balances technical product, cost and schedule
        5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
        6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
        Catia V5 Required

        Unique Skills:
        Develop electrical wiring interconnect system (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wire harness assemblies, utilizing CATIA V5 Electrical and Sheet Metal Work Benches. Capable of interfacing with wiring diagrams, systems, and EMI/EMC requirements. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements.
        • Aerospace Experience is required
        • Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required
        • Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative
        • Knowledge of Catia V5 Electrical is required

        Education and Experience Requirements:
        Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.
         
        Job Number: 372888
        Job Location: Savannah, GA
        Rate: TBD
        Duration: 12 - months
        Start Date: ASAP
        Input Date: 01/23/2018
        Firm Name: CTS INTERNATIONAL
        Address: 11100 NE 8TH ST STE 800
        City, State: BELLEVUE, WA 98004
        Phone: 425/646-2688
        Fax Phone: 425/635-7630
        Email: cjhunter@ctsinternational.com
        Website: www.ctsinternational.com

        Electrical (EWIS) Engineer - Technical Specialist II

        Description:
        Position Purpose:
        Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Company products and services

        Essential Functions:
        1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
        2. Is consulted extensively by associates and others as a recognized authority within the field
        3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
        4. Approach to problem solving balances technical product, cost and schedule
        5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
        6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

        Additional Functions:
        1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

        Other Requirements:
        1. Advanced degree in engineering, or related curriculum preferred.
        2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.

        Unique Skills:
        Develop electrical wiring interconnect systems (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wiring diagrams, cable/wire harness assemblies, and rack/panel designs from electrical system schematics adhering to EWIS requirements. Select qualified electrical components such as connectors, backshells, and other parts. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements.
        • Aerospace Experience is required
        • Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required
        • Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative
        • Knowledge of Mentor Graphics Capital Harness Systems (CHS) is strongly desired

        Education and Experience Requirements:
        Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.
         
        Job Number: 372887
        Job Location: Savannah, GA
        Rate: TBD
        Duration: 12 - months
        Start Date: ASAP
        Input Date: 01/23/2018
        Firm Name: CTS INTERNATIONAL
        Address: 11100 NE 8TH ST STE 800
        City, State: BELLEVUE, WA 98004
        Phone: 425/646-2688
        Fax Phone: 425/635-7630
        Email: cjhunter@ctsinternational.com
        Website: www.ctsinternational.com

        Electrical (EWIS) Engineer -TS II

        Description:
        PDS Tech is seeking a Electrical (EWIS) Engineer -TS II  for an open position in Savannah, GA.

        Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of products and services

        Principle Duties and Responsibilities:

        Essential Functions:
        1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative 

        Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

        Education and Experience Requirements: Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job. 

        Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred. 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.

        Unique Skills: Develop electrical wiring interconnect systems (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wiring diagrams, cable/wire harness assemblies, and rack/panel designs from electrical system schematics adhering to EWIS requirements. Select qualified electrical components such as connectors, backshells, and other parts. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements. • Aerospace Experience is required • Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required • Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative • Knowledge of Mentor Graphics Capital Harness Systems (CHS) is strongly desired


         
        Job Number: 1710074338
        Job Location: Savannah, GA
        Duration: 6 months
        Input Date: 01/23/2018
        Firm Name: PDS TECHNICAL SERVICES
        Attention: Jyotsna Sivan
        Address: 900 CIRCLE 75 PKWY SE STE 600
        City, State: ATLANTA, GA 30339
        800 Phone: 866/224-2745
        Email: southeastjobs@pdstech.com
        Website: http://jobs.pdstech.com/job-detail?id=a1i500000023IdZAAU&URLSource=cjhunter

        Electrical (EWIS) Engineer W/Catia V5-TS II

        Description:
        Electrical (EWIS) Engineer w/Catia V5-TS II
        Savannah, GA
        Rate: $70-$77

        Unique Skills:

        Develop electrical wiring interconnect system (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wire harness assemblies, utilizing CATIA V5 Electrical and Sheet Metal Work Benches. Capable of interfacing with wiring diagrams, systems, and EMI/EMC requirements. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements. • Aerospace Experience is required • Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required • Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative • Knowledge of Catia V5 Electrical is required


        Education and Experience Requirements:

        Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.


        Position Purpose:
        Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

        Principle Duties and Responsibilities:

        Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

        Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

        Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred.
        2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
         
        Job Number: 7977
        Job Location: Savannah, GA
        Rate: $70-$77
        Per Diem: Yes
        Overtime: Possible
        Duration: LT
        Start Date: ASAP
        Input Date: 01/17/2018
        Firm Name: INCONEN CORPORATION
        Attention: Cathy O'Neil
        Address: 6133 BRISTOL PKWY STE 232
        City, State: CULVER CITY, CA 90230
        Phone: 310/410-1931
        Fax Phone: 310/410-1751
        Email: cathy@inconen.com
        Website: www.inconen.com

        Electrical (EWIS) Engineer-TS II

        Description:
        Electrical (EWIS) Engineer-TS II
        Savannah, GA
        Rate: $70-$77

        Unique Skills:

        Develop electrical wiring interconnect systems (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wiring diagrams, cable/wire harness assemblies, and rack/panel designs from electrical system schematics adhering to EWIS requirements. Select qualified electrical components such as connectors, backshells, and other parts. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements. • Aerospace Experience is required • Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required • Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative • Knowledge of Mentor Graphics Capital Harness Systems (CHS) is strongly desired


        Education and Experience Requirements:

        Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.


        Position Purpose:
        Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

        Principle Duties and Responsibilities:

        Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

        Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

        Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred.
        2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
         
        Job Number: 7976
        Job Location: Savannah, GA
        Rate: $70-$77
        Per Diem: Yes
        Overtime: Possible
        Duration: LT
        Start Date: ASAP
        Input Date: 01/17/2018
        Firm Name: INCONEN CORPORATION
        Attention: Cathy O'Neil
        Address: 6133 BRISTOL PKWY STE 232
        City, State: CULVER CITY, CA 90230
        Phone: 310/410-1931
        Fax Phone: 310/410-1751
        Email: cathy@inconen.com
        Website: www.inconen.com

        THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
        Electrical Applications Engineering

        Description:
        UNIQUE SKILLS
        Experience with Autocad required. Aerospace experience required. Experience or knowledge of electrical connectors, backshells, shielding, wiring and electrical connectivity is required. Be Familiar with CFR 14 Part 25 and AS50881. Candidate must be able to create wiring diagrams and schematics to include the selection of qualified electrical components such as connectors, backshells and other electrical parts. Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required. Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project.

        JOB DESCRIPTION
        Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs. in the specific technical discipline or 10 yrs. broad engineering experience in several technical disciplines with Bachelors, or 3 yrs. in the specific technical discipline with Masters, or 1 yr. in the specific technical discipline with PhD. Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

        PRINCIPAL DUTIES AND RESPONSIBILITIES
        ESSENTIAL FUNCTIONS
        1. Contributes to planning, developing and coordinating of important engineering projects
        2. Provides specialized technical assistance to team members
        3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives
        5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
        6. Acts as liaison with representatives outside of the assigned group/area

        ADDITIONAL FUNCTIONS
        1. Actively works to improve daily processes and ensures all work meets customer requirements
        2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
        3. Performs other duties as assigned

        OTHER REQUIREMENTS
        1. Advanced degree in engineering related field preferred
        2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
         
        Job Number: 17-736-93664
        Job Location: Southeast
        Rate: $58.00 to $63.00/per hour
        Per Diem: Split
        Overtime: Possible
        Duration: 6 mths +
        Start Date: ASAP
        Input Date: 01/08/2018
        Firm Name: AGENTE TECHNICAL
        Attention: Alexa Bui
        Address: 714 CENTERPARK DR STE 140
        City, State: COLLEYVILLE, TX 76034-2852
        Phone: 972/415-4545
        800 Phone: 866/758-2494
        Fax Phone: 866/717-5927
        Website: www.agentetech.com

        Electrical Applications Engineering Consultant

        Description:
        PDS Tech is seeking an Electrical Applications Engineer for an open position in Savannah, GA.
        In your role, you will:

         

        Unique Skills:



        • Experience with Mentor Graphics L-Cable required. Aerospace experience required.
        • Experience or knowledge of electrical connectors, backshells, shielding, wiring and electrical connectivity is required. Be Familiar with CFR 14 Part 25 and AS50881.
        • Candidate must be able to create wiring diagrams and schematics to include the selection of qualified electrical components such as connectors, backshells and other electrical parts.
        • Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required.



        Principal Duties and Responsibilities: Essential Functions:

        • Contributes to planning, developing and coordinating of important engineering projects
        • Provides specialized technical assistance to team members
        • Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
        • Determines and develops own approach to solutions within schedule and cost objectives
        • Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
        • Acts as liaison with representatives outside of the assigned group/area


        Additional Functions:

        • Actively works to improve daily processes and ensures all work meets customer requirements
        • Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
        • Performs other duties as assigned Other

        As our ideal candidate, you will meet the following requirements:
        • Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements. 

        Education/Experience:

        • Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
        • 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical

         
        Job Number: 1610052916
        Job Location: Savannah, GA
        Per Diem: No
        Duration: 6 months
        Input Date: 01/23/2018
        Firm Name: PDS TECHNICAL SERVICES
        Attention: Clyde Callwood
        Address: 3922 COCONUT PALM DR STE 100
        City, State: TAMPA, FL 33601
        800 Phone: 866/224-2745
        Email: southeastjobs@pdstech.com
        Website: http://jobs.pdstech.com/job-detail?id=a1i50000001tKymAAE&URLSource=cjhunter

        Electrical Applications Engineering Contractor

        Description:
        PDS Tech is seeking an Electrical Applications Engineer for an open position in Savannah, GA.
        In your role, you will:

         

        Unique Skills:



        Experience with Autocad required.

        Aerospace experience required.

        Experience or knowledge of electrical connectors, backshells, shielding, wiring and electrical connectivity is required. Be Familiar with CFR 14 Part 25 and AS50881. Candidate must be able to create wiring diagrams and schematics to include the selection of qualified electrical components such as connectors, backshells and other electrical parts. Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required.



        Position Purpose:
        Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of products and services

        Principal Duties and Responsibilities:

        Essential Functions:

        1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

        Additional Functions:
        1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned


        As our ideal candidate, you will meet the following requirements:
        • Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements. 

        Education/Experience:

        • Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
        • 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical

        POC: Clyde (813) 426-9917 or ccallwood@pdstech.com

        PDS Tech, Inc. is an Equal Opportunity Employer and will not discriminate against applicants on the basis of race, color, religion, sexual orientation, gender identity, national origin, veteran status, or disability.
         
        Job Number: 1710063879
        Job Location: Savannah, GA
        Per Diem: No
        Duration: 6 months
        Input Date: 01/23/2018
        Firm Name: PDS TECHNICAL SERVICES
        Attention: Clyde Callwood
        Address: 3922 COCONUT PALM DR STE 100
        City, State: TAMPA, FL 33601
        800 Phone: 866/224-2745
        Email: southeastjobs@pdstech.com
        Website: http://jobs.pdstech.com/job-detail?id=a1i50000002GKHeAAO&URLSource=cjhunter

        THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
        Electrical EWIS Eng w/Catia V5 - TS II

        Description:
        UNIQUE SKILLS
        Develop electrical wiring interconnect system (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wire harness assemblies, utilizing CATIA V5 Electrical and Sheet Metal Work Benches. Capable of interfacing with wiring diagrams, systems, and EMI/EMC requirements. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements. • Aerospace Experience is required • Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required • Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative • Knowledge of Catia V5 Electrical is required

        EDUCATION AND EXPERIENCE REQUIREMENTS
        Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

        POSITION PURPOSE
        Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of client products and services

        PRINCIPLE DUTIES AND RESPONSIBILITIES
        ESSENTIAL FUNCTIONS
        1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
        2. Is consulted extensively by associates and others as a recognized authority within the field
        3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
        4. Approach to problem solving balances technical product, cost and schedule
        5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
        6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

        ADDITIONAL FUNCTIONS
        1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

        OTHER REQUIREMENTS
        1. Advanced degree in engineering, or related curriculum preferred.
        2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
         
        Job Number: 17-795-116742
        Job Location: Southeast
        Rate: $58.00 to $63.00/per hour
        Per Diem: Split
        Overtime: Possible
        Duration: 6 mths +
        Start Date: ASAP
        Input Date: 01/08/2018
        Firm Name: AGENTE TECHNICAL
        Attention: Alexa Bui
        Address: 714 CENTERPARK DR STE 140
        City, State: COLLEYVILLE, TX 76034-2852
        Phone: 972/415-4545
        800 Phone: 866/758-2494
        Fax Phone: 866/717-5927
        Website: www.agentetech.com

        Electrical EWIS Engineer/ Electrical Apps

        Description:
        Position Purpose:
        Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services

        Unique Skills:
        • Develop electrical wiring interconnect systems (EWIS), capable of resolving all technical issues relating to EWIS.
        • Produce and maintain wiring diagrams, cable/wire harness assemblies, and rack/panel designs from electrical system schematics adhering to EWIS requirements.
        • Select qualified electrical components such as connectors, backshells, and other parts.
        • Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements
        • Aerospace Experience is required
        • Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required
        • Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative
        • Knowledge of Mentor Graphics Capital Harness Systems (CHS) is strongly desired

        Education and Experience Requirements:
        • Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required.
        • 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors.
        • Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.



        Essential Functions:
        • Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
        • Is consulted extensively by associates and others as a recognized authority within the field
        • Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
        • Approach to problem solving balances technical product, cost and schedule
        • Works without appreciable direction; work is reviewed from a long-range perspective for desired results
        • Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
         
        Job Number: 24-204
        Job Location: Savannah, GA
        Rate: $58 - $63
        Per Diem: Yes
        Overtime: Yes
        Duration: 1 Year plus
        Start Date: ASAP
        Input Date: 01/23/2018
        Firm Name: PRECISION PERSONNEL INC
        Attention: Matt
        Address: 600 CLEVELAND ST STE 700
        City, State: CLEARWATER, FL 33755
        Phone: 727/449-0600
        800 Phone: 877/600-2333
        Fax Phone: 727/449-0627
        Email: matt@precisionpersonnel.com
        Website: www.precisionpersonnel.com

        Electrical EWIS Engineer/EHI

        Description:
        Position Purpose:

        Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services


        Unique Skills:


        • Develop electrical wiring interconnect system (EWIS), capable of resolving all technical issues relating to EWIS.
        • Produce and maintain wire harness assemblies, utilizing CATIA V5 Electrical and Sheet Metal Work Benches.
        • Capable of interfacing with wiring diagrams, systems, and EMI/EMC requirements.
        • Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements.
        • Aerospace Experience is required
        • Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required
        • Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative
        • Knowledge of Catia V5 Electrical is required

        Education and Experience Requirements:

        • Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required.
        • 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors.
        • Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

        Principle Duties and Responsibilities:

        • Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
        • Is consulted extensively by associates and others as a recognized authority within the field
        • Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
        • Approach to problem solving balances technical product, cost and schedule
        • Works without appreciable direction; work is reviewed from a long-range perspective for desired results
        • Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
         
        Job Number: 24-205
        Job Location: Savannah, GA
        Rate: $58 - $63
        Per Diem: Yes
        Overtime: Yes
        Duration: 1 Year plus
        Start Date: ASAP
        Input Date: 01/23/2018
        Firm Name: PRECISION PERSONNEL INC
        Attention: Matt
        Address: 600 CLEVELAND ST STE 700
        City, State: CLEARWATER, FL 33755
        Phone: 727/449-0600
        800 Phone: 877/600-2333
        Fax Phone: 727/449-0627
        Email: matt@precisionpersonnel.com
        Website: www.precisionpersonnel.com

        THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
        Electrical Engineer - Electromagnetic Effects (Active Secret Clearance REQUIRED)

        Description:
        Location: Chandler AZ
        Clearance: Yes, Active Secret
        Job Type: W2 - Contract
        Duration: 1 Year, could be extended
        Schedule: 9/80

        Description:
        • Work with a team of engineers to develop electromagnetic models to capture electromagnetic environment effects (E3) including the prediction of pin level transients.
        • Work within a cross functional team to leverage inputs from CAD, subsystems and systems engineering to develop a baseline electromagnetic model and increment as the system design evolves to capture E3 effects.
        • Updates to the model may include general design changes or the evaluation of potential mitigation approaches.
        • Responsible for model validation through the selection of hardware sets which may be components, subsystems or a combination of them.
        • Includes the development of test plans for the evaluation of those hardware sets with demonstration of model validation though appropriate comparisons between the model and measurements.
        • Travel of up to 25% of the time may be required. 

        Must haves:
        • Experience with electromagnetic environment effects (E3). On the resume that may show up as intra-system electromagnetic compatibility (EMC), Subsystem and equipment electromagnetic interference (EMI), Lightning,…
        • Aerospace experience (rocket (launch) or satellite systems)
        • Active Secret Clearance (or cleared within the past year)

        Nice to haves:
        • Electromagnetic environments effects (E3) modeling experience
        • Rocket (launch) system design experience

        Top three skills:
        • Electromagnetic environments effects (E3)
        • Active Secret Clearance (or cleared within the past year)
        • Aerospace system design or integration and test experience
         
        Job Number: O7802712
        Job Location: Chandler, AZ
        Rate: Open
        Per Diem: Split
        Overtime: Some
        Duration: 12 Months
        Start Date: ASAP
        Input Date: 11/29/2017
        Firm Name: NESC STAFFING
        Attention: Brad McInnis
        Address: 150 MIRONA RD
        City, State: PORTSMOUTH, NH 03801
        Phone: 603/431-9740
        800 Phone: 800/562-3463
        Fax Phone: 800/637-2562
        Website: www.nesc.com

        Electrical Engineer II ( Chandler, AZ ) 7802712

        Description:
        Electrical Engineer II ( Chandler, AZ ) 7802712
        11 month Contract

        Pay Rate: $50/hr w2

        Work with a team of engineers to develop electromagnetic models to capture electromagnetic environment effects (E3)including the prediction of pin level transients. Work within a cross functional team to leverage inputs from CAD, subsystems and systems engineering to develop a baseline electromagnetic model and increment as the system design evolves to capture E3 effects. Updates to the model may include general design changes or the evaluation of potential mitigation approaches. Responsible for model validation through the selection of hardware sets which may be components, subsystems or a combination of them. Includes the development of test plans for the evaluation of those hardware sets with demonstration of model validation though appropriate comparisons between the model and measurements. Travel of up to 25% of the time may be required.

        Job Snapshot: Must haves:
        Experience with electromagnetic environment effects (E3). On the resume that may show up as intra-system electromagnetic compatibility (EMC), Subsystem and equipment electromagnetic interference (EMI), Lightning,…
        Aerospace experience (rocket (launch) or satellite systems)
        Active Secret Clearance (or cleared within the past year)
         
        Job Number: 7802712
        Job Location: Chandler, AZ
        Rate: 50
        Per Diem: Yes
        Overtime: yes
        Duration: 11 month
        Start Date: ASAP
        Input Date: 01/19/2018
        Firm Name: TALENTPRO CONSULTING
        Attention: tim
        Address: 402 N B ST
        City, State: FAIRFIELD, IA 52556
        Phone: 641/209-3000 X101
        Fax Phone: 641/209-3001
        Email: timmahaney@talentproconsulting.com
        Website: www.talentproconsulting.com

        THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
        Electrical Harness Installation Engineer-Special Missions

        Description:
        UNIQUE SKILLS
        Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project. Aerospace experience is required. Knowledge of Catia V5 is required. Candidate must be able to design wire harness assemblies and installations utilizing the Catia V5 Electrical and Sheet Metal Work Benches. Must have intimate knowledge of an ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements, while meeting all installation and maintainability requirements. Candidate must possess knowledge of regulatory guidance material relative to aircraft harness design. Excellent verbal and written communication skills, and computer skills (Catia V5, Catia V4, PC/MS Office) are required.

        JOB DESCRIPTION
        Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs. in the specific technical discipline or 10 yrs. broad engineering experience in several technical disciplines with Bachelors, or 3 yrs. in the specific technical discipline with Masters, or 1 yr. in the specific technical discipline with PhD. Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Client products and services

        PRINCIPAL DUTIES AND RESPONSIBILITIES
        ESSENTIAL FUNCTIONS
        1. Contributes to planning, developing and coordinating of important engineering projects
        2. Provides specialized technical assistance to team members
        3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives
        5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
        6. Acts as liaison with representatives outside of the assigned group/area

        ADDITIONAL FUNCTIONS
        1. Actively works to improve daily processes and ensures all work meets customer requirements
        2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
        3. Performs other duties as assigned
         
        Job Number: 17-783-115282
        Job Location: Southeast
        Rate: $58.00 to $63.00/per hour
        Per Diem: Split
        Overtime: Possible
        Duration: 6 mths +
        Start Date: ASAP
        Input Date: 01/08/2018
        Firm Name: AGENTE TECHNICAL
        Attention: Alexa Bui
        Address: 714 CENTERPARK DR STE 140
        City, State: COLLEYVILLE, TX 76034-2852
        Phone: 972/415-4545
        800 Phone: 866/758-2494
        Fax Phone: 866/717-5927
        Website: www.agentetech.com

        Electrical Harness Installation Engineer-Special Missions

        Description:
        Electrical Harness Installation Engineer-Special Missions
        Savannah, GA
        Rate: $58-$63

        Unique Skills:

        Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project. Aerospace experience is required. Knowledge of Catia V5 is required. Candidate must be able to design wire harness assemblies and installations utilizing the Catia V5 Electrical and Sheet Metal Work Benches. Must have intimate knowledge of an ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements, while meeting all installation and maintainability requirements. Candidate must possess knowledge of regulatory guidance material relative to aircraft harness design. Excellent verbal and written communication skills, and computer skills (Catia V5, Catia V4, PC/MS Office) are required.

        Job description:

        Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

        Position Purpose:

        Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

        Principal Duties and Responsibilities:
        Essential Functions:
        1. Contributes to planning, developing and coordinating of important engineering projects
        2. Provides specialized technical assistance to team members
        3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
        4. Determines and develops own approach to solutions within schedule and cost objectives
        5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
        6. Acts as liaison with representatives outside of the assigned group/area

        Additional Functions:
        1. Actively works to improve daily processes and ensures all work meets customer requirements
        2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
        3. Performs other duties as assigned
         
        Job Number: 7876
        Job Location: Savannah, GA
        Rate: $58-$63
        Per Diem: Yes
        Overtime: Possible
        Duration: LT
        Start Date: ASAP
        Input Date: 01/17/2018
        Firm Name: INCONEN CORPORATION
        Attention: Cathy O'Neil
        Address: 6133 BRISTOL PKWY STE 232
        City, State: CULVER CITY, CA 90230
        Phone: 310/410-1931
        Fax Phone: 310/410-1751
        Email: cathy@inconen.com
        Website: www.inconen.com

        Electrical Harness installation Engineer

        Description:
        PDS is seeking an Equipment and Furnishings Engineer for an open position in Savannah, GA.


        Unique Skills:



         Aerospace experience is required. Knowledge of Catia V5 is required. Candidate must be able to design wire harness assemblies and installations utilizing the Catia V5 Electrical and Sheet Metal Work Benches. Must have intimate knowledge of an ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements, while meeting all installation and maintainability requirements. Candidate must possess knowledge of regulatory guidance material relative to aircraft harness design. Excellent verbal and written communication skills, and computer skills (Catia V5, Catia V4, PC/MS Office) are required.



        Position Purpose:
        Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of  products and services

        Principal Duties and Responsibilities:
        Essential Functions
        :
        1. Contributes to planning, developing and coordinating of important engineering projects
        2. Provides specialized technical assistance to team members
        3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
        4. Determines and develops own approach to solutions within schedule and cost objectives
        5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
        6. Acts as liaison with representatives outside of the assigned group/area

         Additional Functions:
        1. Actively works to improve daily processes and ensures all work meets customer requirements
        2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
        3. Performs other duties as assigned



         

        Education and Experience Requirements:
        Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.



        Other Requirements:

        1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline


         
        Job Number: 1710073229
        Job Location: Savannah, GA
        Duration: 6 months
        Input Date: 01/23/2018
        Firm Name: PDS TECHNICAL SERVICES
        Attention: Jyotsna Sivan
        Address: 900 CIRCLE 75 PKWY SE STE 600
        City, State: ATLANTA, GA 30339
        800 Phone: 866/224-2745
        Email: southeastjobs@pdstech.com
        Website: http://jobs.pdstech.com/job-detail?id=a1i500000023FlGAAU&URLSource=cjhunter

        THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
        Electrical/Project Engineer

        Description:
        Electrical/Project Engineer

        Location: Windsor Locks, CT
        Pay Rate: $58/hr
        Duration: 1 year W2 contract
        Shift: First, 8:00am to 5:00pm
        **MUST be a U.S. CITIZEN**

        Description/Comment:
        Manages a team and provides direction on research, development, design, and testing of electrical components, PC Board Layout, Electronics Packaging equipment, facilities, systems, products and networks for commercial, industrial and governmental purposes.

        Additional Job Details:
        The Human Exploration & Launch business within ISR & Space Systems provides Environmental Control and Life Support Systems in deep space, low earth orbit, undersea, and on the ground. Our hardware is paramount to survival in harsh environments, and our passion for our work demands excellence in everything we do, from the talent we recruit to the highly-engineered systems we deliver. We value people, integrity, ideas and performance. This posting is for a project engineering position at this Company – ISR & Space Systems in Windsor Locks, CT supporting various platforms.
        The candidate will work within an Integrated Product Development Team to support the design and development of various electronic controls; will work with the Project Engineer to execute project to meet schedule and budget milestones; and will collaborate with a wide variety of functional areas inside and outside the organization to ensure successful completion of program requirements.

        Education
        Candidate will have BS in Electrical Engineering with 4 years of working experience in the aerospace industry.

        Responsibilities
        • Coordinate Integrated Product Development Team activities (design, procurement, fabrication and test)
        • Assist Control Account Managers with Earned Value Management (EVMS) by monitoring program cost and schedule performance
        • Assist Control Account Manager with Estimate to Complete
        • Coordinate activities associated with review and approval of engineering specifications and engineering drawings
        • Initiate and process Engineering Changes working with all engineering disciplines to implement approved changes. This will include marking drawings, copying prints, creating PDF’s to support Company electronic Engineering Change process.
        • Coordinate, track and support the assembly and test of development hardware
        • Support supplier selection and part procurement
        • Provide status reports
        • Support program reviews both internal and external
        • Coordinate closure of action items
        • Support operations to fabricate, assemble, test and qualify flight hardware
        • Ensure standard work flow maps are complete
        • Document activities and programs worked with time spend on various activities. This information will be submitted weekly and summed monthly by person with the monthly invoice.

        Skills/Experience
        • Ability to perform as part of a cross-functional team and coordinate the activities of various engineering disciplines including electrical and mechanical design, systems, components, materials development, process development, and supplier development
        • Strong project management, organizational and prioritization skills
        • Ability to work independently or as part of an integrated product team
        • Able to understand electrical circuitry and able to recommend trouble shooting test steps to the stakeholders
        • Ability to read and understand technical manuals, blueprints or drawings
        • Prepare test plans, analyze test data, and prepare reports to support project activity, and maintain up-to-date records of project test results
        • Understanding Earned Value Management Basics
        • Strong troubleshooting and problem solving skills
        • Must understand fundamentals of Root Cause Analysis
        • Interface with shop floor personnel for the purpose of communicating technical, quality, and inspection information
        • Strong written and verbal skills including thorough knowledge of Microsoft Office products
         
        Job Number: 8278
        Job Location: Windsor Locks, CT
        Rate: 58
        Per Diem: No
        Overtime: Possible
        Duration: 1 year
        Start Date: ASAP
        Input Date: 12/18/2017
        Firm Name: INCONEN CORPORATION
        Attention: Rex Calkins
        Address: 6133 BRISTOL PKWY STE 232
        City, State: CULVER CITY, CA 90230
        Phone: 310/410-1931
        Fax Phone: 310/410-1751
        Website: www.inconen.com

        THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
        Embedded Software Engineer

        Description:
        Major purpose:
        We are currently seeking a Senior Software Engineer with experience writing embedded software. This individual will have the opportunity to work on Infrared Product lines, responsible for a variety of software tasks throughout the full lifecycle. Responsibilities include designing, coding, documenting, and testing C and C++ applications/systems. General knowledge of hardware and communication protocols is a huge plus.
        Major functions:

        Technical/Functional skills:
        Education/Experience/Licenses etc.: Required Competencies/Skills:
        • Experience using C/C++ to develop embedded software
        • Experience with Real-Time Operating Systems (FreeRTOS a plus)
        • Excellent verbal and written communication skills
        • Demonstrated ability to work as part of a team
        • 6+ years of experience
        • Minimum of BS in Computer Engineering, Electrical Engineering, Computer Science or similar

        Preferred Competencies/Skills:
        • Experience with Communication Protocols (Ethernet, RS422, CoaXpress, Camera Link, GigE Vision, etc.)
        • Experience working with other programming languages such as C#, MATLAB, Python, etc.
        • Experience in the Defense, Space, Aerospace, or similar industries
        • Experience using Quartus and Altera/Client tools
        • Experience using electronic test equipment such as oscilloscopes, DMMs, and basic lab equipment
        • Experience with Linux and Windows Development Environments
        • Basic knowledge of circuits, schematics, and hardware design
         
        Job Number: 17-53009
        Job Location: Mason, OH
        Rate: 65.00 - 85.00
        Per Diem: No
        Overtime: Possible
        Duration: LT
        Start Date: ASAP
        Input Date: 12/07/2017
        Firm Name: NESCO RESOURCE
        Attention: Sebastian Hernandez
        Address: 101 COMMERCE ST STE 3001
        City, State: LAKE MARY, FL 32746
        Phone: 407/710-8000
        Fax Phone: 407/710-8001
        Website: www.nescoresource.com

        Engineer Mechanical - 4- SCI/SSBI Clearance

        Description:
        PDS Tech, Inc. is seeking a candidate for the Engineer Mechanical - 4- SCI/SSBI Clearance position located in Redondo Beach, CA.
         

        Candidate will be responsible for performing thermal analysis on space-based hardware using industry standard thermal analysis software/tools. Must possess an understanding of the basic principles of radiation and conduction heat transfer in conjunction with environmental heating effects and parameters associated with spaceflight applications. Responsibilities



        include development of active and passive thermal designs using numerical solutions and hand calculations, preparation of technical documents and PowerPoint presentations, establishing test parameters for thermal testing, test monitoring and correlation of test results to model predictions. Demonstrate the skill and ability to perform professional tasks. Ability to collaborate in and lead in team environment. Ability to prioritize and adjust tasks to accomplish the project result.



        Ability to prioritize multiple responsibilities and/or accomplishing them simultaneously. Ability to comprehend and analyze complex problems and develop solutions.




         


        Qualifications
         

        Basic Qualifications:



        9 Years with Bachelors in Science; 7 Years with Masters; 4 Years with PhD.



        along with experience using thermal analytical tools and testing procedures.



        Requires in-scope SCI/SSBI clearance.




        Preferred Qualifications:



         MS or PhD in Mechanical or Aerospace Engineering with design, analysis and integration experience of spacecraft thermal systems.



        Experience using thermal analysis tools (SINDA/G, SINDA/FLUENT, TSS, Thermal Desktop, Flotherm) and aerospace standard design tools (NX, CATIA).




         
        Job Number: 1710069953
        Job Location: Redondo Beach, CA
        Duration: 6 months
        Input Date: 01/23/2018
        Firm Name: PDS TECHNICAL SERVICES
        Attention: Phil Press
        Address: 370 N WESTLAKE BLVD STE 120
        City, State: WESTLAKE VILLAGE, CA 91362
        Phone: 805/418-9862
        800 Phone: 866/458-4322
        Fax Phone: 805/418-9866
        Email: cecjwestlake@pdstech.com
        Website: http://jobs.pdstech.com/job-detail?id=a1i50000002CogoAAC&URLSource=cjhunter

        Engineer Structural- 5- Secret Clearance

        Description:
        PDS Tech is seeking a candidate for the Engineer Structural 5 position located in Melbourne, FL.  

        Perform static, dynamic, and DaDT structural analyses of metallic airframe structure, mechanical systems, and equipment, by hand and by using the automated methods and procedures approved for the program.
        Ensure that 
        designs meet program requirements and are the lightest, lowest cost, and highest quality products consistent with schedule and budget objectives.
        The analyst may also be expected to derive non-flight applied loads, create, extract and 
        distribute internal loads, and perform weight and stiffness optimization. T
        ools utilized may include FEMAP, NX,Teamcenter 
        and other software applications.

        Basic Qualifications:



        Bachelor of Science degree (ME/AE/CE) with 14 years of experience in AEROSPACE Structural Analysis.




        Preferred Qualifications:



        Knowledge of FEMAP and NX CAE. Candidate must be able to collaborate in a team environment, prioritize and adjust tasks to accomplish the project result, prioritize multiple responsibilities and/or accomplishing them simultaneously, and comprehend and analyze complex problems and develop solutions. Candidate must be able to collaborate in a team environment, prioritize and adjust tasks to accomplish the project result, prioritize multiple responsibilities and/or accomplishing them simultaneously, and comprehend and analyze complex problems and develop solutions.

         


         
        Job Number: 1710075260
        Job Location: Melbourne, FL
        Duration: 6 months
        Input Date: 01/23/2018
        Firm Name: PDS TECHNICAL SERVICES
        Attention: Elisa Petersen
        Address: 11828 W CENTRAL STE 100
        City, State: WICHITA, KS 67212-5129
        Phone: 316/729-1800
        800 Phone: 800/333-8644
        Fax Phone: 316/729-1857
        Email: cecjwichita@pdstech.com
        Website: http://jobs.pdstech.com/job-detail?id=a1i500000023L3MAAU&URLSource=cjhunter

        Engineering Design 1/2 (3) - FL - C

        Description:
        RESPONSIBILTIES:
        Designs major components or major portions of a functional system to develop or improve products and facilitate manufacturing operations. Develops basic data and makes preliminary layouts, sketches, and notes necessary to present design proposal. Investigates pertinent design factors such as ease of manufacture, availability of materials and equipment, interchangeability, replace ability, strength-weight efficiency, and contractual specification requirements and cost. Coordinates with other organizations affected by design development. Makes layouts of complex assemblies and details parts of devices, mechanisms, and structures. Checks completed layouts and drawings for clarity, completeness, conformity to standards, procedures, specifications, and accuracy of calculations and dimensioning. Identifies design errors, omissions, and other deficiencies, and recommends revisions and/or improvements in design layout to responsible engineers or designers.
        Design Engineer: Work will involve aerospace mechanical, pneumatic, hydraulic, and electrical subsystem test equipment design.

        REQUIRED EXPERIENCE:
        Strong CAD skills, proficient in MS Office, must be willing to relocate to Palmdale in approx. 1-2 years.
        Level 1 (2 positions): 0 Years with Bachelors in Science Mechanical Engineering
        Level 2 (1 Position): 2 Years with Bachelors in Science Mechanical Engineering; 0 Years with Masters Mechanical Engineering.
        Preferred Qualifications:
        Knowledge of test equipment design a plus, knowledge of aerospace subsystems a plus.

        EDUCATION:
        Bachelors in Science Mechanical Engineering, or Master's degree.

        MISCELLANEOUS:
        Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

        HOURS:
        9/80 workweek

         
        Job Number: 162898
        Job Location: Melbourne, FL
        Rate: $28 to $40.00 DOE
        Duration: 9-12 months
        Input Date: 01/23/2018
        Firm Name: CHIPTON ROSS
        Attention: Melody Mullins
        Address: 343 MAIN ST
        City, State: EL SEGUNDO, CA 90245
        Phone: 310/414-7800 X286
        800 Phone: 800/927-9318
        Fax Phone: 310/414-7808
        Email: mmullins@chiptonross.com
        Website: www.chiptonross.com

        Engineering Recruiter - Hartford

        Description:
        Job Title:      Engineering (Aerospace & Defense) Recruiter
        Location:      Hartford, CT
        Salary:           Base + Commission
        Job Type:      Full Time w/ benefits
         
         
        User-added image
         
        “Connecting the Right People to the Right Jobs”
        Do you have a passion for interacting with people and helping them find a job?  Do you thrive in a fast paced, high volume environment?  If so, PDS Tech may have an opportunity for YOU!  We are looking for self-confident experienced recruiters that can persevere in the staffing world.
         
        Job Responsibilities:
        •  Create and build a pool of qualified candidates
        • Assess and analyze candidate’s technical and professional skills through careful resume screening and phone interviews
        • Negotiate wages and other terms and conditions of employment
        • Meet or exceed set goals in a competitive environment

        Job Requirements:

        • Two plus years Engineering Recruiting experience
        • Staffing industry experience desirable
        • Advanced internet recruiting/sourcing techniques
        • Able to interact effectively with internal and external contacts at all levels
        • Able to work flexible hours on short notice as needed
        • Enjoy working in a fast paced environment
        • Use good judgment and discretion to accomplish goals
        • Be currently authorized to work in the United States for any employer

        To View all jobs at PDS Tech please visit our career section at http://www.pdstech.com
        PDS Tech, Inc. is an Equal Opportunity Employer and will not discriminate against applicants on the basis of race, color, religion, sexual orientation, gender identity, national origin, veteran status, or disability.
         
         
         
         
        Job Number: 1710076981
        Job Location: East Hartford, CT
        Duration: 12 months
        Input Date: 01/23/2018
        Firm Name: PDS TECHNICAL SERVICES
        Attention: Stacy Smith
        Address: 50 FOUNDERS PLAZA STE 304
        City, State: EAST HARTFORD, CT 06108
        Phone: 860/289-2643
        800 Phone: 866/636-4723
        Fax Phone: 800/556-5284
        Email: northeastjobs@pdstech.com
        Website: http://jobs.pdstech.com/job-detail?id=a1i500000023P35AAE&URLSource=cjhunter

        Equipment & Tool Design & Engineers

        Description:
        ACS Group has been in the aerospace industry for over 30 years - Helping top talent in the aerospace industry find exceptional careers! Positions available now

        -Medical
        -Dental
        -Per Diem
        -401(k)
        -Life
        -Vision

        Please email us to see if your background matches any of our job openings
         
        Job Location: Everett/Seattle, WA
        Input Date: 12/05/2017
        Firm Name: AMERICAN CYBERSYSTEMS
        Attention: Janice Plattner or Andrew Walbert
        Address: 1750 112TH AVE NE STE C228
        City, State: BELLEVUE, WA 98004
        Phone: 425/605-2321 or 425/605-2312
        Email: janice.plattner@acsicorp.com; andrew.walbert@comforce.com
        Website: www.acsicorp.com

        THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
        Equipment & Tool Designer

        Description:
        Equipment & Tool Designer

        Location: Everett, WA
        Duration: 9 months

        Description:
        Leads the development of highly complex equipment and tooling concepts and specifications to satisfy aerospace product design and build requirements. Leads design reviews, design requirement collection, drawing creation and revision. Researches the application of robotics, automation and new technology to support the build plan. Creates off-load packages, specifications, purchase requests and usage instructions for equipment and tooling. Checks designs for compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements. Establishes and validates spares requirements. Leads the implementation of best practices into functional process documentation to drive standard work. Oversees the development and documentation of equipment and tooling inspection and usage instructions, preventative maintenance plans, and user training. Provides technical direction to support engineering changes and discrepancy resolution. Oversees the maintenance of hardware and software configuration. Assesses and makes recommendations for disposition of equipment and tooling.

        Education
        AA degree in related discipline and typically 6 or more years of related experience or an equivalent combination of education and experience.

        Skill Code:
        66W-Tech Designer

        If interested then please share updated resume at ravi@iconma.com
         
        Job Number: 17-19963
        Job Location: Everett,, WA
        Input Date: 12/26/2017
        Firm Name: ICONMA LLC
        Attention: Ravi Kumar
        Address: 1201 PACIFIC AVE STE 600
        City, State: TACOMA, WA 98402
        Phone: 253/213-2012
        Website: www.iconma.com

        THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
        Equipment & Tool Designer 3

        Description:
        Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

        We are currently searching for the right talent to fill this opportunity:

        Equipment & Tool Designer 3
        (U.S. Citizenship Required*)
        Everett, WA
        2017-4999

        Responsibilities:
        • Evaluates program and project requirements, develops complex equipment and tooling concepts and designs solutions for the Production System.
        • Compiles and analyzes technical data to determine the effects on product engineering design and rate estimates, identifies robotics, automation or technology recommendations and system integration for equipment and tooling.
        • Ensures compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements.
        • Validates contractual performance milestones, maintains configuration control, conducts reviews, prepares plans for productions readiness, preventative maintenance, and spares.
        • Conducts training for Production and Maintenance personnel.
        • Develops and implements work-arounds and maintains configuration of hardware, software and documentation.
        • Performs studies and make recommendation for disposition of assets.

        Qualification:
        *U.S. Citizenship is required by law, regulation, executive order, or government contract.

        Education and Experience:
        • Bachelor's and 5 or more years' experience, Master's degree with 3 or more years' experience or PhD degree with experience.
        • Degree must be from an accredited course of study in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

        Conditions of Employment:
        Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

        About Our Company:
        Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

        Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

        Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

        Join a team that values your experience!

        PLEASE APPLY ONLINE HERE: https://careers-moseleytechnical.icims.com/jobs/4999/equipment-%26-tool-engineer-3/job?mode=view
         
        Job Number: 2017-4999
        Job Location: Everett, WA
        Duration: 10 Months
        Input Date: 12/05/2017
        Firm Name: MOSELEY TECHNICAL SERVICES INC
        Attention: Aaron Burrows
        Address: 7500 S MEMORIAL PKWY STE 215-R
        City, State: HUNTSVILLE, AL 35802
        Phone: 256/880-0446
        Fax Phone: 256/880-0936
        Website: www.moseleytechnical.com

        THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
        Equipment & Tool Designer 3

        Description:
        Equipment & Tool Designer 3

        Location: Everett, WA
        Duration: 9 months

        Job Description:
        Investigates and develops complex equipment and tooling concepts and specifications to satisfy aerospace product design and build requirements. Participates in design reviews, collects design requirements, creates and revises drawings and models, researches the application of robotics, automation and new technology to support the build plan. Creates off-load packages, specifications, purchase requests and usage instructions for equipment and tooling. Checks designs for compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements. Develops and documents equipment and tooling inspection and usage instructions, preventative maintenance plans, and user training. Provides technical support for engineering changes and discrepancies by investigating problems and analyzing data to identify solutions. Maintains hardware and software configuration. Assesses and makes recommendations for disposition of equipment and tooling.

        Education:
        AA degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience.

        Skill Code: 66W-Tech Designer

        If interested then please share updated resume at ravi@iconma.com
         
        Job Number: 17-19956
        Job Location: Everett,, WA
        Input Date: 01/02/2018
        Firm Name: ICONMA LLC
        Attention: Ravi Kumar
        Address: 1201 PACIFIC AVE STE 600
        City, State: TACOMA, WA 98402
        Phone: 253/213-2012
        Website: www.iconma.com

        Equipment & Tool Designer 3

        Description:
        PDS Tech Inc is seeking am Equipment & Tool Designer for an open position in Everett, WA
        • Investigates and develops complex equipment and tooling concepts and specifications to satisfy aerospace product design and build requirements.
        • Participates in design reviews, collects design requirements, creates and revises drawings and models, researches the application of robotics, automation and new technology to support the build plan.
        • Creates off-load packages, specifications, purchase requests and usage instructions for equipment and tooling.
        • Checks designs for compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements.
        • Develops and documents equipment and tooling inspection and usage instructions, preventative maintenance plans, and user training.
        • Provides technical support for engineering changes and discrepancies by investigating problems and analyzing data to identify solutions. Maintains hardware and software configuration.
        • Assesses and makes recommendations for disposition of equipment and tooling.

        AA degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience.
         
        Job Number: 1710078101
        Job Location: Everett, WA
        Duration: 9 months
        Input Date: 01/23/2018
        Firm Name: PDS TECHNICAL SERVICES
        Attention: John Blackmore
        Address: 12720 GATEWAY DR S STE 102
        City, State: TUKWILA, WA 98168-3333
        Phone: 206/763-2840
        800 Phone: 800/678-8644
        Fax Phone: 206/763-3283
        Email: cecjseattle@pdstech.com
        Website: http://jobs.pdstech.com/job-detail?id=a1i500000023RvcAAE&URLSource=cjhunter

        THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
        Equipment & Tool Designer 3

        Description:
        Job Description
        • Investigates and develops complex equipment and tooling concepts and specifications to satisfy aerospace product design and build requirements.
        • Participates in design reviews, collects design requirements, creates and revises drawings and models, researches the application of robotics, automation and new technology to support the build plan.
        • Creates off-load packages, specifications, purchase requests and usage instructions for equipment and tooling.
        • Checks designs for compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements.
        • Develops and documents equipment and tooling inspection and usage instructions, preventative maintenance plans, and user training.
        • Provides technical support for engineering changes and discrepancies by investigating problems and analyzing data to identify solutions.
        • Maintains hardware and software configuration.
        • Assesses and makes recommendations for disposition of equipment and tooling.

        Education/Experience
        AA degree in related discipline and typically 3 or more years of related experience
         
        Job Number: Ph# 636-438-0314;39855
        Job Location: Everett, WA
        Rate: Hourly
        Per Diem: Split
        Overtime: Possible
        Duration: 9 mos
        Start Date: 1/8/2018
        Input Date: 12/06/2017
        Firm Name: APOLLO PROFESSIONAL SOLUTIONS
        Attention: Michelle Fox
        Address: WESTRIDGE OFFICE PARK
        2646 HIGHWAY 109 STE 207

        City, State: WILDWOOD, MO 63040
        Phone: 636/438-0312
        800 Phone: 866/277-3343
        Fax Phone: 636/220-8284
        Website: www.apollopros.com

        Equipment & Tool Designer 3 (5) - WA

        Description:
        Chipton Ross is seeking 4 Equipment & Tool Designer 3's for contract assignments in Everett, WA.

        RESPONSIBILITIES:
        Investigates and develops complex equipment and tooling concepts and specifications to satisfy aerospace product design and build requirements. Participates in design reviews, collects design requirements, creates and revises drawings and models, researches the application of robotics, automation and new technology to support the build plan. Creates off-load packages, specifications, purchase requests and usage instructions for equipment and tooling. Checks designs for compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements. Develops and documents equipment and tooling inspection and usage instructions, preventative maintenance plans, and user training. Provides technical support for engineering changes and discrepancies by investigating problems and analyzing data to identify solutions. Maintains hardware and software configuration. Assesses and makes recommendations for disposition of equipment and tooling.

        Preference is CATIA V5. They will not be using another CAD system during this assignment

        EDUCATION:
        Accredited AA degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience.

        FULL TIME/FIRST SHIFT
        WORK HOURS: 6:30 AM - 3:00 PM

         
        Job Number: 166517
        Job Location: Everett, WA
        Rate: $DOE
        Duration: 9 Months
        Input Date: 01/23/2018
        Firm Name: CHIPTON ROSS
        Attention: Brenda Ordaz
        Address: 343 MAIN ST
        City, State: EL SEGUNDO, CA 90245
        Phone: 310/414-7800 X286
        800 Phone: 800/927-9318
        Fax Phone: 310/414-7808
        Email: bordaz@chiptonross.com
        Website: www.chiptonross.com

        THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
        Equipment & Tool Designer 4

        Description:
        Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

        We are currently searching for the right talent to fill this opportunity:

        Equipment & Tool Designer 4
        (U.S. Citizenship Required*)
        Everett, WA
        2017-5001

        Responsibilities:
        • Leads the development of highly complex equipment and tooling concepts and specifications to satisfy aerospace product design and build requirements.
        • Leads design reviews, design requirement collection, drawing creation and revision.
        • Researches the application of robotics, automation and new technology to support the build plan.
        • Creates off-load packages, specifications, purchase requests and usage instructions for equipment and tooling.
        • Checks designs for compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements.
        • Establishes and validates spares requirements.
        • Leads the implementation of best practices into functional process documentation to drive standard work.
        • Oversees the development and documentation of equipment and tooling inspection and usage instructions, preventative maintenance plans, and user training.
        • Provides technical direction to support engineering changes and discrepancy resolution.
        • Oversees the maintenance of hardware and software configuration.
        • Assesses and makes recommendations for disposition of equipment and tooling.

        Qualification:
        *U.S. Citizenship is required by law, regulation, executive order, or government contract.

        Education and Experience:
        AA degree in related discipline and typically 6 or more years of related experience or an equivalent combination of education and experience.

        Conditions of Employment:
        Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

        About Our Company:
        Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

        Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

        Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

        Join a team that values your experience!



        TO APPLY, PLEASE VISIT OUR WEBSITE: https://careers-moseleytechnical.icims.com/jobs/5001/equipment-%26-tool-designer-4/job?mode=view
         
        Job Number: 2017-5001
        Job Location: Everett, WA
        Duration: 9 Months
        Input Date: 12/05/2017
        Firm Name: MOSELEY TECHNICAL SERVICES INC
        Attention: Aaron Burrows
        Address: 7500 S MEMORIAL PKWY STE 215-R
        City, State: HUNTSVILLE, AL 35802
        Phone: 256/880-0446
        Fax Phone: 256/880-0936
        Website: www.moseleytechnical.com

        THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
        Equipment & Tool Designer 3

        Description:
        Leads the development of highly complex equipment and tooling concepts and specifications to satisfy aerospace product design and build requirements. Leads design reviews, design requirement collection, drawing creation and revision. Researches the application of robotics, automation and new technology to support the build plan. Creates off-load packages, specifications, purchase requests and usage instructions for equipment and tooling. Checks designs for compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements. Establishes and validates spares requirements. Leads the implementation of best practices into functional process documentation to drive standard work. Oversees the development and documentation of equipment and tooling inspection and usage instructions, preventative maintenance plans, and user training. Provides technical direction to support engineering changes and discrepancy resolution. Oversees the maintenance of hardware and software configuration. Assesses and makes recommendations for disposition of equipment and tooling.

        AA degree in related discipline and typically 6 or more years of related experience or an equivalent combination of education and experience.
         
        Job Number: 17-27027
        Job Location: Everett, WA
        Per Diem: Split
        Overtime: possible
        Duration: 9 months
        Start Date: 1/8/18
        Input Date: 12/18/2017
        Firm Name: ICONMA LLC
        Attention: Constance Whitcomb
        Address: 4620 E 53RD ST
        City, State: DAVENPORT, IA 52807
        Phone: 312/502-4795
        Website: www.iconma.com

        Equipment & Tool Designer 4

        Description:
        PDS Tech is seeking an Equipment & Tool Engineer for an open position in Everett, WA
        • Leads the development of highly complex equipment and tooling concepts and specifications to satisfy aerospace product design and build requirements. Leads design reviews, design requirement collection, drawing creation and revision.
        • Researches the application of robotics, automation and new technology to support the build plan.
        • Creates off-load packages, specifications, purchase requests and usage instructions for equipment and tooling.
        • Checks designs for compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements.
        • Establishes and validates spares requirements.
        • Leads the implementation of best practices into functional process documentation to drive standard work.
        • Oversees the development and documentation of equipment and tooling inspection and usage instructions, preventative maintenance plans, and user training. Provides technical direction to support engineering changes and discrepancy resolution.
        • Oversees the maintenance of hardware and software configuration. Assesses and makes recommendations for disposition of equipment and tooling.

        AA degree in related discipline and typically 6 or more years of related experience or an equivalent combination of education and experience.
         
        Job Number: 1710078107
        Job Location: Everett, WA
        Duration: 9 months
        Input Date: 01/23/2018
        Firm Name: PDS TECHNICAL SERVICES
        Attention: Peter An
        Address: 12720 GATEWAY DR S STE 102
        City, State: TUKWILA, WA 98168-3333
        Phone: 206/763-2840
        800 Phone: 800/678-8644
        Fax Phone: 206/763-3283
        Email: cecjseattle@pdstech.com
        Website: http://jobs.pdstech.com/job-detail?id=a1i500000023Rw6AAE&URLSource=cjhunter

        THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
        Equipment & Tool Designer 4

        Description:
        Job Description
        • Leads the development of highly complex equipment and tooling concepts and specifications to satisfy aerospace product design and build requirements.
        • Leads design reviews, design requirement collection, drawing creation and revision.
        • Researches the application of robotics, automation and new technology to support the build plan.
        • Creates off-load packages, specifications, purchase requests and usage instructions for equipment and tooling.
        • Checks designs for compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements.
        • Establishes and validates spares requirements.
        • Leads the implementation of best practices into functional process documentation to drive standard work.
        • Oversees the development and documentation of equipment and tooling inspection and usage instructions, preventative maintenance plans, and user training.
        • Provides technical direction to support engineering changes and discrepancy resolution.
        • Oversees the maintenance of hardware and software configuration.
        • Assesses and makes recommendations for disposition of equipment and tooling.

        Education/Experience
        AA degree in related discipline and typically 6 or more years of related experience
         
        Job Number: Ph# 636-438-0314;
        Job Location: Everett, WA
        Rate: Hourly
        Per Diem: Split
        Overtime: Possible
        Duration: 9 mos
        Start Date: 1/8/2018
        Input Date: 12/06/2017
        Firm Name: APOLLO PROFESSIONAL SOLUTIONS
        Attention: Michelle Fox
        Address: WESTRIDGE OFFICE PARK
        2646 HIGHWAY 109 STE 207

        City, State: WILDWOOD, MO 63040
        Phone: 636/438-0312
        800 Phone: 866/277-3343
        Fax Phone: 636/220-8284
        Website: www.apollopros.com

        THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
        Equipment & Tool Engineer 4

        Description:
        Equipment & Tool Engineer 4


        Develops program and project requirements, develops highly complex equipment and tooling concepts and designs solutions, including alternatives for the Production System. Validates analysis of technical data, influences product engineering design and makes robotics, automation or technical recommendations to support production system integration for a aerospace products. Leads the creation and modification of equipment and tooling definition at the program level. Executes project plans, provides input to Make/Buy decisions and partners with Procurement to meet program schedule, cost and quality targets. Ensures compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements. Leads gated reviews and develops plans for production readiness, preventative maintenance and spares. Validates contractual performance milestones. Develops and implements work-arounds and maintains configuration of hardware, software and documentation. Conducts studies and make recommendation for disposition of assets.

        Degree and typical experience in engineering classification: Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.
         
        Job Number: 17-27026
        Job Location: Everett, WA
        Per Diem: Split
        Overtime: possible
        Duration: 9 months
        Start Date: 1/8/18
        Input Date: 12/18/2017
        Firm Name: ICONMA LLC
        Attention: Constance Whitcomb
        Address: 4620 E 53RD ST
        City, State: DAVENPORT, IA 52807
        Phone: 312/502-4795
        Website: www.iconma.com

        THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
        Equipment & Tool Engineer 4

        Description:
        Equipment & Tool Engineer 4

        Location: Everett, WA
        Duration: 9 months

        Job Description:
        Develops program and project requirements, develops highly complex equipment and tooling concepts and designs solutions, including alternatives for the Production System. Validates analysis of technical data, influences product engineering design and makes robotics, automation or technical recommendations to support production system integration for a aerospace products. Leads the creation and modification of equipment and tooling definition at the program level. Executes project plans, provides input to Make/Buy decisions and partners with Procurement to meet program schedule, cost and quality targets. Ensures compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements. Leads gated reviews and develops plans for production readiness, preventative maintenance and spares. Validates contractual performance milestones. Develops and implements work-arounds and maintains configuration of hardware, software and documentation. Conducts studies and make recommendation for disposition of assets.

        Education:
        Degree and typical experience in engineering classification: Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

        Skill Code:
        66U-Designer Engineer

        If interested then please share updated resume at ravi@iconma.com
         
        Job Number: 17-19959
        Job Location: Everett,, WA
        Input Date: 01/02/2018
        Firm Name: ICONMA LLC
        Attention: Ravi Kumar
        Address: 1201 PACIFIC AVE STE 600
        City, State: TACOMA, WA 98402
        Phone: 253/213-2012
        Website: www.iconma.com

        Equipment & Tool Engineer 4

        Description:
        PDS Tech is seeking an Equipment & Tool Engineer for an open position in Everett, WA
        • Develops program and project requirements, develops highly complex equipment and tooling concepts and designs solutions, including alternatives for the Production System.
        • Validates analysis of technical data, influences product engineering design and makes robotics, automation or technical recommendations to support production system integration for a aerospace products.
        • Leads the creation and modification of equipment and tooling definition at the program level. Executes project plans, provides input to Make/Buy decisions and partners with Procurement to meet program schedule, cost and quality targets.
        • Ensures compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements.
        • Leads gated reviews and develops plans for production readiness, preventative maintenance and spares.
        • Validates contractual performance milestones.
        • Develops and implements work-arounds and maintains configuration of hardware, software and documentation.
        • Conducts studies and make recommendation for disposition of assets.

        Degree and typical experience in engineering classification: Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.
         
        Job Number: 1710078106
        Job Location: Everett, WA
        Duration: 9 months
        Input Date: 01/23/2018
        Firm Name: PDS TECHNICAL SERVICES
        Attention: Mary Jordan
        Address: 12720 GATEWAY DR S STE 102
        City, State: TUKWILA, WA 98168-3333
        Phone: 206/763-2840
        800 Phone: 800/678-8644
        Fax Phone: 206/763-3283
        Email: cecjseattle@pdstech.com
        Website: http://jobs.pdstech.com/job-detail?id=a1i500000023Rw1AAE&URLSource=cjhunter

        FPGA Design/Verification Engineer

        Description:
        Seeking a Designer with the following qualifications: experience with FPGA or ASIC design; experience in the aerospace field; experience with VHDL, Verilog, DSP, SOC, UVM, OVM, Xilinx, and C/C+



        US citizenship or permanent resident required

        - Paid Holidays
        - Dental
        - Blue Cross/Blue Shield Medical Insurance
        - Vision
        - Direct Deposit
         
        Job Number: 52336
        Job Location: Sunnyvale, CA
        Input Date: 09/25/2017
        Firm Name: BUTLER AEROSPACE & DEFENSE
        Attention: Jerry Rothchild
        Address: SHELTON POINTE STE 204
        2 TRAP FALLS ROAD

        City, State: SHELTON, CT 06484
        Phone: 203/926-2705
        800 Phone: 800/837-9114 ext 2705
        Email: jrothchild@butler.com
        Website: www.butler.com

        Fire Protection Engineer -- Aerospace

        Description:
        Job location: Overseas

        Contact:
        Morgan at (585) 441-9800 x104 or
        Nicholas at (585) 441-9800 x126


        Paid Travel
        Great Hourly Rates
        Direct Deposit
        Per Diem
        Tax Benefits
        Healthcare Options
         
        Job Location: Overseas/International
        Input Date: 03/27/2017
        Firm Name: NORAMTEC CONSULTANTS AMERICAS INC
        Attention: Morgan or Nicholas
        Address: 150 RESEARCH BLVD
        City, State: ROCHESTER, NY 14623
        Phone: 585/441-9800 x104 or x126
        Email: morgan.ricklefs@noramtecna.com; nicholas.salsedo@noramtecna.com
        Website: www.noramtec.com

        THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
        Fitness & Wellness Specialist 2

        Description:
        Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

        We are currently searching for the right talent to fill this opportunity:

        Fitness & Wellness Specialist 2
        (U.S. Citizenship Required*)
        Puyallup, WA
        2017-5066

        Responsibilities:
        • Plans, administers and delivers wellness programs. Engages employees in services that support their well-being. Implements exercise programs that are safe, effective and engaging. Establishes policies and procedures for on-site wellness activities. Collaborates with corporate strategy, suppliers, business partners and others to effectively deliver services.

        • Supports promotion and delivery of company wellness programs. Develops and instructs exercise programs that are safe and effective. Interacts with suppliers, business partners and others to effectively deliver services.

        • Supports delivery of wellness activities in alignment with company wellness initiatives. Develops and delivers basic exercise programs to individuals or groups. Modifies exercise to individual needs and provides focused one on one coaching. Provides recommendations and referrals to company wellness programs.

        • Performs facility monitoring, cleaning and maintenance. Assists with daily operations of facilities, participant recruitment and administrative duties. Supports overall operations of facilities.

        • The position is 30 hours a week M-Th. Start and end times may very slightly due to work demands.

        Qualification:
        • Required – Certifications are current and annual re-fresher training that meets OSHA compliance requirements, must be provided for:
        o American Heart Association Heartsaver CPR Training
        o First Aid Training
        o AED (Automated External Defibrillator) Training
        o OSHA compliance training related to Bloodborne Pathogens
        *U.S. Citizenship is required by law, regulation, executive order, or government contract.

        Education and Experience:
        Bachelor's degree and typically 3 or more years' related work experience, a Master's degree and typically 1 or more years' related work experience or an equivalent combination of education and experience.

        Conditions of Employment:
        Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

        About Our Company:
        Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

        Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

        Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

        Join a team that values your experience!

        PLEASE APPLY ONLINE HERE: https://careers-moseleytechnical.icims.com/jobs/5066/fitness-%26-wellness-specialist-2/job?mode=view
         
        Job Number: 2017-5066
        Job Location: Puyallup, WA
        Duration: 12 Months
        Input Date: 12/05/2017
        Firm Name: MOSELEY TECHNICAL SERVICES INC
        Attention: Bob Jones
        Address: 7500 S MEMORIAL PKWY STE 215-R
        City, State: HUNTSVILLE, AL 35802
        Phone: 256/880-0446
        Fax Phone: 256/880-0936
        Website: www.moseleytechnical.com

        Flight Controls Engineer

        Description:
        PDS Tech is seeking a Flight Controls Engineer for an open position in Nagoya, Japan.

         
        •  
        • B.S. degree in Aerospace Engineering, Mechanical Engineering or related technical degree.
        • Applicable coursework or coop/intern experience to this position desired.
        • Working knowledge of generic CAD design tool processes is desired.
        • Experience with CATIA V6/Enovia – or ability to learn it quickly from V5
        • Experience with Kinematics in CATIA
        • Flight Controls Systems design experience a plus
        • Must have excellent verbal communication and presentation skills.
        • Proficient with Microsoft Office applications including Word and Excel.
        • Professional demeanor, troubleshooting and organizational skills are necessary.
        • International experience desirable. 
        • Must be able to stay in Japan a minimum of 3-5 years or until final certification.

         
        Job Number: 1610045561
        Job Location: Nagoya,
        Duration: 36 months
        Input Date: 01/23/2018
        Firm Name: PDS TECHNICAL SERVICES
        Attention: Chad Dunavant
        Address: 300 E JOHN CARPENTER FWY STE 700
        City, State: IRVING, TX 75062
        Phone: 214/647-9600
        800 Phone: 800/270-4737
        Fax Phone: 214/647-9630
        Website: http://jobs.pdstech.com/job-detail?id=a1i500000003BKTAA2&URLSource=cjhunter

        THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
        Flight Readiness Technician D

        Description:
        Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

        We are currently searching for the right talent to fill this opportunity:

        Flight Readiness Technician D
        (U.S. Citizenship Required*)
        Palmdale, CA
        2017-5053

        Join our team as an Aircraft Inspector – Mechanic, Electrical, Electronics, and Mechanic Flight – to perform operational check out of aircraft prior to and during preflight.

        Responsibilities:
        • Perform activities prior to flight status and final inspection and daily maintenance of completed experimental aircraft or major modification to experimental aircraft.
        • Inspect explosive and armament installations. Inspect and/or perform bench and flight line operational checkout and inspect, trouble-shooting, adjustment and repair of electrical and electronic systems. Inspect the calibration, adjustment, troubleshooting, repair and modification of electronic test equipment used exclusively by production and at times may be required to inspect the calibration, adjustment, trouble-shooting, repair and modification of other electronic test equipment as directed.
        • Maintain aircraft historical records.
        • Perform aircraft and/or spacecraft bench or flight line operational checkout, trouble-shooting, adjustment and repair of any electrical or electronic system.
        • Fabricate, adjust, trouble shoot, repair and modify electronic test equipment.
        • Modify parts such as skins, doors, aircraft frames, test panels, clips, brackets, angles and ribs without the aid of jigs and fixtures. Modify aircraft components or aircraft support equipment.
        • Perform operational checkout, including diagnosing and correcting malfunctions, of hydraulic systems and mechanical systems.
        • Operate engines during run-ups and troubleshoot when needed. Perform engine buildup as assigned.
        • Install, repair, and replace tanks, power plants, generators, and aircraft engines. Install or replace reservoirs, etc. and repair leaks in same. Install or replace instruments such as fuel quantity, rate of climb and oil pressure indicators. Install and load ejection seats and guns. Install adjust, repair and replace structural parts and assemblies.
        • Splice, route, clamp, solder, and string tie wires or wire bundles.
        • Repair, install and hook up bomb, missile and rocket racks and pylons.
        • Perform composite repairs

        Qualification:
        • Required – Active Secret Clearance with the ability to obtain a Top Secret.
        • Knowledgeable and skilled in F15 mechanical, structural, power plant, hydraulic, pneumatic, and electrical systems operation and flightline methods and common shop practices.
        • Knowledgeable and able to interpret and work from USAF technical orders (T.O.s), blueprints, sketches and written and verbal instructions.
        • Proficient using computer systems for office and shop applications.
        • Knowledgeable about and able to work in FOD controlled environments.
        • Knowledgeable and able to apply shop math.
        • Skilled in listening and interpersonal participation, and able to work with others as part of a team which includes giving and receiving feedback, and assisting others in completion of tasks.
        • Able to complete and maintain all required training and certifications needed to do job efficiently.
        • Able to climb, stand, bend, kneel, reach, crawl, and walk on or around aircraft or work stands and in confined spaces.
        • F-15 Crew Chief experienced personnel, sound understanding of Air Force Tech Order usage and application. Experienced Flight Line operations, preflight, launch, recovery, and functional checkout of Hydraulics/Avionics/Mission Systems/Weapons loading.
        • F-15 Electrical/Avionics experience, sound understanding of Air Force Tech Order usage and application. Versed in Flight Line Operations, Avionics/Electrical preflight and functional checkout of disturbed systems
        • Weapons Load Standardization/Weapons loading: Plans, organizes, participate and directs aircraft armament systems maintenance activities. Establishes and evaluates performance and training standards, maintenance controls, and procedures. Checks methods and techniques used to load and unload munitions on aircraft, to repair and maintain aircraft release and gun systems, and to maintain, repair, and modify associated equipment.

        *U.S. Citizenship is required by law, regulation, executive order, or government contract.

        Education and Experience:
        • Required – specialized vocational training or an Associate's degree and 3 to 5 years work related F15 experience or an equivalent combination of education and experience

        Conditions of Employment:
        Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

        About Our Company:
        Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

        Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

        Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

        Join a team that values your experience!



        APPLY ONLINE HERE: https://careers-moseleytechnical.icims.com/jobs/5053/flight-readiness-technician-d/job?mode=view
         
        Job Number: 2017-5053
        Job Location: Palmdale, CA
        Duration: 12 Months
        Input Date: 12/01/2017
        Firm Name: MOSELEY TECHNICAL SERVICES INC
        Attention: https://careers-moseleytechnical.icims.com/jobs/5053/flight-readiness-technician-d/job?mode=view
        Address: 7500 S MEMORIAL PKWY STE 215-R
        City, State: HUNTSVILLE, AL 35802
        Phone: 256/880-0446
        Fax Phone: 256/880-0936
        Website: www.moseleytechnical.com

        Flight Sciences -- Performance

        Description:
        Aerospace flight and test/certification engineering specialists

        Paid Travel
        Great Hourly Rates
        Direct Deposit
        Per Diem
        Tax Benefits
        Healthcare Options
         
        Job Location: Washington
        Input Date: 03/27/2017
        Firm Name: NORAMTEC CONSULTANTS AMERICAS INC
        Attention: Erika
        Address: 150 RESEARCH BLVD
        City, State: ROCHESTER, NY 14623
        Phone: 585/441-9800 x106
        Email: erika.legrand@noramtecna.com
        Website: www.noramtec.com

        Flight Sciences -- Stability & Controls

        Description:
        Aerospace flight and test/certification engineering specialists

        Paid Travel
        Great Hourly Rates
        Direct Deposit
        Per Diem
        Tax Benefits
        Healthcare Options
         
        Job Location: Washington
        Input Date: 03/27/2017
        Firm Name: NORAMTEC CONSULTANTS AMERICAS INC
        Attention: Erika
        Address: 150 RESEARCH BLVD
        City, State: ROCHESTER, NY 14623
        Phone: 585/441-9800 x106
        Email: erika.legrand@noramtecna.com
        Website: www.noramtec.com

        Flight Test -- Troubleshooting Processes

        Description:
        Aerospace flight and test/certification engineering specialists

        Paid Travel
        Great Hourly Rates
        Direct Deposit
        Per Diem
        Tax Benefits
        Healthcare Options
         
        Job Location: Washington
        Input Date: 03/27/2017
        Firm Name: NORAMTEC CONSULTANTS AMERICAS INC
        Attention: Erika
        Address: 150 RESEARCH BLVD
        City, State: ROCHESTER, NY 14623
        Phone: 585/441-9800 x106
        Email: erika.legrand@noramtecna.com
        Website: www.noramtec.com

        THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
        Flight Test Design

        Description:
        The Engineer, Flight Test position is responsible for the design, development, and coordination equipment to support Flight Test operations.

        Duties and Responsibilities:
        1. Designs, develops, coordinates, equipment, and Installations, to support Flight Test operations. Typical equipment and installations including ballast, data booms, cockpit displays, antennas, racks, and various transducers (acceleration, pressure, temperature, displacement, etc.).
        2. Applies principles of chemistry, physics, and material behavior to develop metallic, non-metallic and composite material and processing specifications, fabrication and assembly processes. Applies material properties and design allowables, processing processes and quality engineering specifications.
        3. Designs structural products and components of products, as well as Systems level integration, evaluates alternatives including cost and risk, supportability and analyses for total systems. Analyses are performed at all levels of total system to include: concept, design, fabrication, installation, and operation.
        4. Examines engineering drawings and related documents for soundness, efficiency, and simplicity in design; completeness, clarity, and dimensional accuracy; correctness of materials and processes; conformity to design/drafting standards, design specifications, and practicability; and economy of fabrication, assembly, and installation.
        5. Supports fabrication and installation of test equipment.
        6. Resolves all issues related to design, documentation, procurement, fabrication, and installation.
        Education, Work Experience, Certification and/or Licensure:
        1. Bachelors’ degree in Aerospace Engineering, Electrical Engineering, Engineering Technology other related field preferred.
        2. 5 years’ experience in aerospace design and testing.
        Knowledge, Skills and Abilities:
        1. Proficient in 3D multiple component designs and 2D fully dimensional and tolerance drawings. CATIA V5, PLM systems, TeamCenter strongly preferred.
        2. Strong Microsoft Office Suites (Word, Excel, and PowerPoint) strongly preferred.
        3. Strong computer operating systems skills.
        4. Excellent oral and written communication skills.
        5. Excellent interpersonal skills.
        6. Experience with aircraft data acquisition systems.
        7. Experience with FAA regulations.
        8. Excellent analytical skills.
         
        Job Number: 28-017
        Job Location: Greensboro, NC
        Rate: $35-$50
        Per Diem: Yes
        Overtime: Yes
        Duration: 1 Year plus
        Start Date: ASAP
        Input Date: 12/18/2017
        Firm Name: PRECISION PERSONNEL INC
        Attention: Matt
        Address: 600 CLEVELAND ST STE 700
        City, State: CLEARWATER, FL 33755
        Phone: 727/449-0600
        800 Phone: 877/600-2333
        Fax Phone: 727/449-0627
        Website: www.precisionpersonnel.com

        THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
        Flight Test Engineer

        Description:
        Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM’s. Located in Seattle, they are a small but rapidly growing company in Seattle, WA. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants.

        We are seeking full-time and contract Flight Test Engineers to join us in Moses Lake, WA. The ideal candidate will possess experimental flight test operational experience in either STC or Type Cert Programs. The individual in this position will be involved in a range of airplane flight test operations.

        Essential Functions:
        Coordinate test and certification requirements.
        Author flight test and ground test plans including test hazard analysis.
        Author instrumentation specifications, wire diagrams, FTEO packages, and calibration documentation.
        Support instrumentation installation as required.
        Support ground operations, including weight and balance activities, fuel management, pre-flight and post-flight tasks and briefings.
        Support flight and ground test conduct and data collection.
        Analyze test data and evaluate compliance with regulations.
        Prepare certification test reports.
        Domestic and occasional international travel is required.
        Desired Qualifications:

        5+ years relevant work experience related to experimental flight test operations. Experience in all of the above activities is not critical.
        Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.
        Ability to think critically, identify and synthesize important information necessary to inform client deliverables.
        Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
        A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
        Demonstrates personal accountability, initiative and versatility on a consistent basis with minimal guidance.
        Proficient in working with Microsoft Office applications including Word, Excel, and PowerPoint. Ability to quickly learn to operate new software.
        Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
         
        Job Location: Moses Lake, WA
        Per Diem: possible
        Overtime: Yes
        Duration: LT
        Start Date: asap
        Input Date: 12/07/2017
        Firm Name: VELOCITY CONSULTING SOLUTIONS
        Attention: Susan McGlinsey
        Address: 20306 15TH AVE NE STE A
        City, State: SHORELINE, WA 98155
        Phone: 206/812-1061
        Website: www.velocity-cs.com

        Flight Test Equipment -- Management/Coordination

        Description:
        Aerospace flight and test/certification engineering specialists

        Paid Travel
        Great Hourly Rates
        Direct Deposit
        Per Diem
        Tax Benefits
        Healthcare Options
         
        Job Location: Washington
        Input Date: 03/27/2017
        Firm Name: NORAMTEC CONSULTANTS AMERICAS INC
        Attention: Erika
        Address: 150 RESEARCH BLVD
        City, State: ROCHESTER, NY 14623
        Phone: 585/441-9800 x106
        Email: erika.legrand@noramtecna.com
        Website: www.noramtec.com

        Flight Test Management

        Description:
        Aerospace flight and test/certification engineering specialists

        Paid Travel
        Great Hourly Rates
        Direct Deposit
        Per Diem
        Tax Benefits
        Healthcare Options
         
        Job Location: Washington
        Input Date: 03/27/2017
        Firm Name: NORAMTEC CONSULTANTS AMERICAS INC
        Attention: Erika
        Address: 150 RESEARCH BLVD
        City, State: ROCHESTER, NY 14623
        Phone: 585/441-9800 x106
        Email: erika.legrand@noramtecna.com
        Website: www.noramtec.com

        Flight Test Project Engineers

        Description:
        Aerospace flight and test/certification engineering specialists

        Paid Travel
        Great Hourly Rates
        Direct Deposit
        Per Diem
        Tax Benefits
        Healthcare Options
         
        Job Location: Washington
        Input Date: 03/27/2017
        Firm Name: NORAMTEC CONSULTANTS AMERICAS INC
        Attention: Erika
        Address: 150 RESEARCH BLVD
        City, State: ROCHESTER, NY 14623
        Phone: 585/441-9800 x106
        Email: erika.legrand@noramtecna.com
        Website: www.noramtec.com

        GFD5NC-Product Repair/Mod Tech C - GFH-Aerospace Products Repair/Mod- Secret

        Description:
        PDS Tech is seeking a Product Repair/Mod Technician for an open position in Fort Walton Beach, FL.

        Assembles, disassembles and/or modifies systems by changing, removing, replacing or upgrading aerospace vehicle components to correct failures or implement changes. Oversees assembly, disassembly or overhaul. Configures aerospace vehicles and bench test equipment. Troubleshoots complex pneumatic, hydraulic and electrical systems to isolate mechanical or electrical faults and repair faulty components. Performs validation/verification testing of systems and components. Documents procedures and established processes to ensure contractual and regulatory compliance (e.g., repairs, test results, applicable modifications and inspection results). Inspects components and verifies repairs for flight worthiness requirements. Oversees training. Works under general direction.
         
        • Education / Experience:    High school diploma or GED and typically 4 or more years’ related experience or an equivalent combination of education and experience.
        • Requested Security Clearance:    Secret 
        • Travel Comments:    Occasional travel is required both domestically and internationally at times to perform depot level modifications. Current passport is required. No scheduled trips at this time.

         
        Job Number: 1710078442
        Job Location: Fort Walton Beach, FL
        Duration: 12 months
        Input Date: 01/23/2018
        Firm Name: PDS TECHNICAL SERVICES
        Attention: Patrick Mahoney
        Address: 300 E JOHN CARPENTER FWY STE 700
        City, State: IRVING, TX 75062
        800 Phone: 866/224-2745
        Email: southeastjobs@pdstech.com
        Website: http://jobs.pdstech.com/job-detail?id=a1i500000023TF3AAM&URLSource=cjhunter

        GNC Aerospace Engineer ( Gilbert, AZ ) 6954262

        Description:
        GNC Aerospace Engineer ( Gilbert, AZ ) 6954262
        12+ Month Contract


        Perform requirements management, vendor technical monitoring and guidance, and I&T activities for Guidance Navigation and Control (GNC) spacecraft component hardware. This includes analyzing system requirements to perform hardware component selection, developing component hardware Statement of Work (SOW), analyzing, allocating and decomposing higher level spacecraft requirements to their respective GNC components, monitoring component vendor’s development activities per the SOW and developing test procedures and automated tests of the GNC hardware to verify requirements, support spacecraft I&T activities, perform detailed spacecraft simulations using in house simulation tools, and analyze data to develop performance and functional data reports to support requirements.

        Looking for satellite experience, launch vehicle, UAV and aircraft is acceptable if their related experience is with GNC hardware component. Without the GNC hardware component experience that’s a show stopper for the candidate. 5 – 8 years of experience is good

        Required Capability:
        Must have hardware electrical Perl background.
        Additional Capability: Knowledge of Matlab & Simulink is a plus.
         
        Job Number: 6954262
        Job Location: Gilbert, AZ
        Rate: open
        Per Diem: Split
        Overtime: Yes
        Duration: 12 month
        Start Date: ASAP
        Input Date: 01/19/2018
        Firm Name: TALENTPRO CONSULTING
        Attention: Tim
        Address: 402 N B ST
        City, State: FAIRFIELD, IA 52556
        Phone: 641/209-3000 X101
        Fax Phone: 641/209-3001
        Email: timmahaney@talentproconsulting.com
        Website: www.talentproconsulting.com

        THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
        General Repair Technician B

        Description:
        Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

        We are currently searching for the right talent to fill this opportunity:

        General Repair Technician B
        (U.S. Citizenship Required*)
        Universal City, TX
        2017-5057

        Responsibilities:
        • Maintains a limited number of systems by removing, replacing, repairing or upgrading components.
        • Troubleshoots problems to isolate faulty components.
        • Conducts routine functional tests by operating equipment and using appropriate test equipment.
        • Performs a variety of visual inspections as required by equipment maintenance documents.
        • Documents maintenance and inspection actions as required.
        • Works under general supervision.

        Qualification:
        • Proficient knowledge of electrical technology and schematics
        • Able to support up to 10% travel

        *U.S. Citizenship is required by law, regulation, executive order, or government contract.

        Education and Experience:
        • High school diploma or GED and typically 1 or more years’ related experience or an equivalent combination of education and experience.
        • Experience with manufacturing wiring bundles and electrical cables is highly desired.

        Conditions of Employment:
        Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

        About Our Company:
        Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

        Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

        Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

        Join a team that values your experience!



        APPLY ONLINE HERE: https://careers-moseleytechnical.icims.com/jobs/5057/general-repair-technician-b/job?mode=view
         
        Job Number: 2017-5057
        Job Location: Universal City, TX
        Duration: 12 Months
        Input Date: 12/01/2017
        Firm Name: MOSELEY TECHNICAL SERVICES INC
        Attention: https://careers-moseleytechnical.icims.com/jobs/5057/general-repair-technician-b/job?mode=view
        Address: 7500 S MEMORIAL PKWY STE 215-R
        City, State: HUNTSVILLE, AL 35802
        Phone: 256/880-0446
        Fax Phone: 256/880-0936
        Website: www.moseleytechnical.com

        Ground Support Equipment Design Engineer IV

        Description:
        Support Equipme