Job Search Results

376 listings were found that matched your search words: Keywords: Electronic ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2018/12/10 Monday 04:49AM Pacific Time by ContractJobHunter. )

Listings 1 - 376

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Advanced Production Operator

Description:
A Fortune 500 and worldwide leader in business aviation; specializing in Command and Control, Communications Networking, Rugged Computing, Information Assurance and Cyber Defense is searching for the right talent to fill this opportunity:

Advanced Production Operator
(U.S. Citizenship Required*)
Scottsdale, AZ
2017-5019

Responsibilities:
• Perform project tasks of moderately complex nature ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and subassemblies such as modules, boards, panels, drawers, frames, and cables
• Read and interpret moderately complex schematics and drawings
• Follow more advanced methods, techniques, and sequence of operations in performing wiring, component installation, hand soldering, & cable harnessing on subassemblies and units
• Build or integrate hardware for prototypes, subassemblies or systems
• Perform more complex rework and refurbishment of hardware and systems
• Incorporate Master Change Order (MCO), Engineering Change Order (ECO), Variance Authorization (VA) and visual aids
• Perform more advanced fabrication and marking as well as
• Maintain and operates various equipment/tooling
• Perform inspection per documentation
• Complete appropriate quality paperwork as required (e.g. Corrective Action Request, Discrepant Material Report etc.)
• Accurately complete process paperwork and entering data into the applicable work order management system
• Support continuous improvement activities and participates in problem solving activities
• Maintain a clean and orderly work area
• Support safety/housekeeping standards
• Contacts are primarily within immediate work unit and direct supervisor
• Receive little instruction on daily work; general instructions only on new assignments
• May conduct manufacturing inspections on processing line in accordance to quality specifications
• May disassemble, modify, rework, reassemble, and test experimental or prototype assemblies and subassemblies according to specifications and under simulated conditions

Qualifications:
• Precision solder skills
• Previous certifications to J-STD_001 Space Addendum, or NASA 8739 is preferred.
• Solid manufacturing process skills, knowledge of polarity, inspection criteria, and Bills of Material (BOM)
• Able to work unsupervised and to accurately use manufacturing work order application
• Solid communication skills, both written and verbal
• Demonstrated time management skills
• Flexbile, adaptable, and works effectively on any size work team
• Solid computer skills and knowledge measuring/test equipment and math
• Able to use various computer software applications to analyze and manage data
• Able to interpret more advanced documents, work instruction, and schematics
• Solid knowledge of configuration control procedures applicable to the assigned work/area
• Able to lift a minimum of 15 pounds

*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
High School Diploma or equivalent is required plus a minimum of 4 years of relevant experience

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!


PLEASE APPLY ONLINE: https://careers-moseleytechnical.icims.com/jobs/5019/adv-production-operator-2/job?mode=view
 
Job Number: 2017-5019
Job Location: Scottsdale, AZ
Duration: 18 Months
Input Date: 12/29/2017
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Bob Jones
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer / no clearance / Flight Control and Vehicle Management System skills a requirement CA

Description:
Requirement #AERO-REQ-0710
Work Location Palmdale, CA (1011 Lockheed Way)
Work Week 9/80

Needed Date 11/28/2017
End Date 11/09/2018
Number of Resources 1
No Clearance

Flight Control and Vehicle Management System skills a requirement

Title: Aeronautical Engineer

Description

Candidate will contribute to aircraft FC&VMS (Flight Controls & Vehicle Management System) design, configuration development, feasibility and risk analyses, and technology maturation plans, define, develop, analyze and coordinate FC&VMS requirements with other flight sciences disciplines including ground and flight test, reliability & maintainability, system safety, and other personnel. Develop models and simulations as needed for design and analysis. Perform trade studies and define preliminary requirements for VMS architecture components. Design mechanical and electrical/electronic interfaces to support system integration and test. Define high level software requirements and flow down requirements to procurement specifications. Tasks may also include management of selected vendors, including verification of requirements. The candidate will support system/software verification and validation effort and customer reviews during all phases of system development. The candidate will develop and support integration and system check out (SCO) procedures on flight test article and support pre-flight and post-flight analysis and reviews

Skill/Experience/Education

Mandatory:

Hardware and software integration experience Familiarity with Flight Controls and Vehicle Management Systems Demonstrated ability coordinating with systems engineering, hardware designers and subsystems
Desired:

B.S. Degree or above in an Engineering Discipline
Several years of hardware & laboratory experience MATLAB, Simulink experience


Interview Required Yes
OT Allowed Yes (OT Limitation: No)
Travel No
Non-Exempt
Rate Type Per Hour

Rates
0-4 Yrs Pay Rate: 65.00 USD
5-8 Yrs Pay Rate: 70.00 USD
9+ Yrs Pay Rate: 75.00 USD
 
Job Number: JE-0710
Job Location: Palmdale, CA
Rate: 65-75/hr DOE
Duration: 12 month contract
Input Date: 01/16/2018
Last Updated: 02/06/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer with active secret / design of mechanical and electronic interfaces / integration test / serial buses C/C++ programming CA

Description:
160459
Requirement #AERO-REQ-0666
Work Location Palmdale, CA
Work Week 9/80
Priority High
Needed Date 11/27/2017
End Date 11/09/2018
Number of Resources 1
Security Clearance Secret

Title: Aeronautical Engineer

Description

Candidate will be responsible for designing and building a system integration laboratory (SIL). This effort includes design of mechanical and electronic interfaces to support software development, integration and test efforts. Candidate will have hands-on hardware experience and software skills. Candidate will be able to troubleshoot hardware/software integration issues and perform integration and test. Define, develop, analyze and coordinate SIL requirements, allocate requirements and define interfaces between subsystems. Effort also includes flow down of requirements to procurement specifications, and management of vendor selection and vendor performance, including verification of requirements. The candidate will support system/software verification and validation effort and customer reviews during all phases of system development. The candidate will develop and support integration and system check out (SCO) procedures on flight test article and support pre-flight and post-flight analysis and reviews. Good oral and written communication skills are required as is the ability to flex and adapt in a fast-paced team environment. Complex organization and documentation skills are required.

Skill/Experience/Education

Mandatory:

Final Secret Clearance.

Hardware and software integration experience.
Demonstrated ability to design and troubleshoot mechanical and electronic interfaces to support software development and test.
C or C++ programming experience.
Experience with serial buses.

Desired:

B.S. Degree or above in an Engineering Discipline Several years of laboratory experience


Interview Required Yes
OT Allowed Yes (OT Limitation: No)
Travel No
Non-Exempt

Rates
0-4 Yrs Pay Rate: 65.00 USD
5-8 Yrs Pay Rate: 70.00 USD
9+ Yrs Pay Rate: 75.00 USD
 
Job Number: JE-0666
Job Location: Palmdale, CA
Rate: 65-75/hr DOE
Duration: 12 month contract
Input Date: 12/04/2017
Last Updated: 03/15/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Welders - Elk Grove Village, IL

Description:
STS AeroStaff Services now offers Welder jobs in Elk Grove Village, Illinois.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Duties:

• Welder will be repairing Cargo Containers and work as a Repair Man Tech/Assmebler of the cargo units when there is no welding to be done
• Familiarize and proficient in retrieving information from customer, manufacturer and FAA technical data
• Repair and assemble FAA certified aircraft equipment including aluminum and lightweight containers, heavy duty pallets, Ladders & ground handling equipment, and Galley Carts, according to manufacturer and company manuals
• Comply with FAA and company policies and procedures
• Ensure accurate and timely completion of work orders
• Ability to perform routine and non-routine tasks independently
• Maintain work area clean and free of debris, which may interfere with the proper function of any units undergoing maintenance
• Maintain safe and clean work environment
• Ensure and maintain company tools and equipment in service standard, report any damaged tools and equipment to Station Manager/Supervisor
• Ensure system security of the electronic recordkeeping system regarding their area of responsibility and changing password if there is a possibility of its being compromised
• Provide feedback/suggestion to improve customer satisfaction
• Perform any other duties as assigned by the Station Manager/Supervisor

Qualifications:

• Welder certification required

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 41028
Job Location: Elk Grove Village, IL
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 01/08/2018
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics UT-ENG-3104MST

Description:
DESCRIPTION
Supports, performs and manages development, design, integration and test function and project teams of Avionics/flight control systems, including electronics, SW, hydraulics, etc. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

POSITION ROLES & RESPONSIBILITIES
- Create Catia V5 hydraulic and mechanical flight control layouts, installations, assemblies, details.
- Create, release, and revise Catia V5 engineering detail, assembly, installation drawings and bill of materials using Enovia Matrix, LCA.

- Work closely with various design groups to coordinate designs and establish aircraft interfaces.
- Work closely with aircraft final assembly shop personnel.
- Work closely with various suppliers.

EXPERIENCE REQUIRED
- Minimum of a BS in Engineering Design required
- High level communications skills both written and oral.
- In-depth knowledge of Catia V5, Enovia Matrix and LCA functionality.
- Experience with Catia V5 Tubing function.
 
Job Number: 17-796-1819
Job Location: Northeast
Rate: OPEN
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 01/29/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Component Engineers - Orlando, FL

Description:
STS AeroStaff Services now offers Component Engineer jobs in Orlando, Florida.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Duties:

• Contributes to successful project completion by participating in the resolution of issues such as conflicting design requirements, unsuitability of standard material, and difficult coordination requirements
• Plans and conducts the analysis, inspection, design, test, and/or integration to assure the quality of products or components
• Performs quality engineering reviews of design documentation for compliance with stated requirements, including vendor quality manuals and company quality records
• Applies statistical process control (SPC) methods for analyzing data to evaluate the acceptability of components
• Must be willing to accept a wide variety of work assignments supporting the total end-to-end process of capturing, designing, developing, testing, manufacturing, and life-cycle support of electronic systems
• Responsible for the performance of detailed part level obsolescence management consisting of monitoring BOM’s, solving issues, scheduling and managing implementation of fixes, finding new sources, and reacting and solving issues to ensure no production line stoppages
• Candidate will work closely with design engineers, interface with other functional areas and vendors, and enforce PMPCP Compliance
• The candidate will periodically be required to make presentations to program management and customers

Qualifications:

• Five years’ or more of experience in Component Engineering
• Must be proficient with computer tools such as MS Excel
• Should be comfortable working in a team environment and willing to shadow Senior Components Engineer at the start of the assignment to develop the necessary skills for this position
• Also must be able to learn task specific tools such as Q-Star, Partminer and web based obsolescence tools
• Must have good communication skills and able to effectively work with manufacturers and other external part suppliers

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 40989
Job Location: Orlando, FL
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 01/02/2018
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Components Engineer

Description:
Must have secret clearance

Contributes to successful project completion by participating in the resolution of issues such as conflicting design requirements, unsuitability of standard material, and difficult coordination requirements. Plans and conducts the analysis, inspection, design, test, and/or integration to assure the quality of products or components. Performs quality engineering reviews of design documentation for compliance with stated requirements, including vendor quality manuals and company quality records. Applies statistical process control (SPC) methods for analyzing data to evaluate the acceptability of components. Skills: Must be willing to accept a wide variety of work assignments supporting the total end-to-end process of capturing, designing, developing, testing, manufacturing, and life-cycle support of electronic systems. Responsible for the performance of detailed part level obsolescence management consisting of monitoring BOM’s, solving issues, scheduling and managing implementation of fixes, finding new sources, and reacting and solving issues to ensure no production line stoppages. Candidate will work closely with design engineers, interface with other functional areas and vendors, and enforce PMPCP Compliance. The candidate will periodically be required to make presentations to program management and customers.
 
Job Number: 40842
Job Location: FL
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 08/21/2018
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Components Engineer - Level 3

Description:
Location: Orlando, FL
Rate: $40.00 - $45.00/HR
Duration: 1 year contract
Shift: 4x10

**MUST have an Active Secret Clearance or have had one within the last two (2) years**

Description
- Contributes to successful project completion by participating in the resolution of issues such as conflicting design requirements, unsuitability of standard material, and difficult coordination requirements.
- Plans and conducts the analysis, inspection, design, test, and/or integration to assure the quality of products or components.
- Performs quality engineering reviews of design documentation for compliance with stated requirements, including vendor quality manuals and company quality records.
- Applies statistical process control (SPC) methods for analyzing data to evaluate the acceptability of components.

Skills:
- Must be willing to accept a wide variety of work assignments supporting the total end-to-end process of capturing, designing, developing, testing, manufacturing, and life-cycle support of electronic systems.
- Responsible for the performance of detailed part level obsolescence management consisting of monitoring BOM’s, solving issues, scheduling and managing implementation of fixes, finding new sources, and reacting and solving issues to ensure no production line stoppages.
- Candidate will work closely with design engineers, interface with other functional areas and vendors, and enforce PMPCP Compliance.
- The candidate will periodically be required to make presentations to program management and customers.

Skill/Experience/Education
Mandatory:
- Five years or more of experience in Component Engineering.
- Must be proficient with computer tools such as MS Excel.
- Should be comfortable working in a team environment and willing to shadow Senior Components Engineer at the start of the assignment to develop the necessary skills for this position.
- Also must be able to learn task specific tools such as Q-Star, Partminer and web based obsolescence tools.
- Must have good communication skills and able to effectively work with manufacturers and other external part suppliers.
 
Job Number: 7694
Job Location: Orlando, FL
Rate: $40.00 - $45.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 07/31/2017
Last Updated: 01/17/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
•Location; Midwest Oklahoma
•Must have a Bachelors in Engineering
•DOD Clearance is NOT required
•This position will support our Air Traffic Control and Landing Systems (ATCALS) and B-1 customers, by solving electrical sustainment issues. The sustainment projects address obsolete components in multiple instrumentation, control, power, electronic, electro-mechanical interface systems. The engineer will work under the direction of a lead engineer to:
• Provide technical solutions and make improvements or modification to produce the desired results
• Develop technical documentation and publications relating to users, systems, processes, work flows, operations, products, and services.
• Create new electrical schematics
• Ensure proper system artwork generation
• Implement design changes of existing components
• Write engineering change orders

Additional Details:
•Candidates must be a U.S. Citizen
•Full Time – Non Exempt
•Ensure candidate experience relates to that provided in job description and experience is clearly identifiable on resume for client review
•Opportunity for contract-to-hire based on worker performance, worker attendance and dependability and client business needs.
•Start date will be moved up as needed in order for selected candidate to start ASAP once on-boarding is completed/clear and final clearance is obtained.
•Be sure your candidates are available to start right away once on-boarding is complete.
•Worker will utilize DelTek for weekly time reporting. It is imperative that the registration is completed as soon as possible after receipt of registration invitation. Your attention to this process will eliminate delays in receipt of worker hours and invoice creation.
•There is a chance for some OT (overtime) as needed and must be approved by KBRwyle supervisor
•Client manager will conduct phone and in-person interview.
 
Job Location: Midwest, OK
Rate: $29-32
Overtime: Possible
Duration: Full Time – Non Exempt
Start Date: ASAP
Input Date: 01/17/2018
Last Updated: 01/29/2018
Firm Name: MIDCOM CORPORATION
Attention: Juan Johnson
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Level 3

Description:
Electrical Engineer – Level 3

Location: Cape Canaveral, FL
Pay Rate: DOE
Duration: 1 year W2 contract
Shift: not specified, exempt OT
**MUST be a U.S. CITIZEN**


Job Description / Responsibilities:
-The Electrical Engineer Level 3 will prepare and coordinate predominantly Electrical design, construction and troubleshoot interfaces for launch facilities electrical systems and support equipment installations at CCAFS for this Company.
-The successful candidate, as part of Company's Engineering and Infrastructure Team, shall be required to produce accurate working schematics and detailed design drawings as well as generate validating electrical analysis calculations.
-He/she will perform field walk-downs and review and revise electronic CAD files from a variety of native drawing databases to produce accurate drawings for implementation of the project.
-Candidate will ensure all projects are maintained on implementation schedules and within established engineering budgets.
-May conduct feasibility studies, determine engineering criteria or manpower and cost estimates for projects or tasks, or perform analyses to develop design/redesign options, improvements, or recommendations for systems and components.
-Evaluate components for life assessment and market requirements.
-Researches, develops, designs, and tests electrical components, equipment, systems, and networks.
-Actively supports system operation, trouble shooting and maintenance.
-This position requires knowledge of Electrical design of commercial medium voltage equipment and systems, drafting practices as well as a sound practical knowledge of engineering principles, practices, and industry standards including NFPA 70e and NEC codes.
-Candidate shall have the ability to successfully interface with contractor personnel which requires onsite observation and direct contact in the field working with Union Workforce personnel.

-Duties shall include, but not limited to, Contractor walk downs, Request for Information evaluation and resolution, Statements of Work and Field Work Directives development.
-Bachelor's degree highly preferred

-The successful candidate should have at least (10) years of relevant experience building and/or modifying facilities electrical systems.
-Also, he/she should have at least (5) years of recent Autodesk AutoCAD experience (version 2013 or newer).
 
Job Number: 8439
Job Location: Cape Canaveral, FL
Rate: DOE
Per Diem: Split Possible
Overtime: Exempt
Duration: 1 year
Start Date: ASAP
Input Date: 12/19/2017
Last Updated: 02/14/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Electrical Technician

Description:
One year in length
Maximum Hourly pay rate $18.00
Tests and troubleshoots electronic products using standard and specialized test equipment. 

1. Troubleshoots electronic products to sub-assembly and component level utilizing schematics and standard troubleshooting practices and procedures 
2. Sets up test equipment and tests electronic products using established test procedures and schematics
3. Provides technical guidance to assemblers and re-work assemblers 
4. Performs cross functional tasks within fairly similar situations resulting in standardized but not identical outcomes

5. Knowledge of the operation and use of electronic production test equipment and hand assembly tools used in a high tech surface mount & through-hole technology manufacturing and production environment
6. Knowledge of advanced electronic test and troubleshooting techniques to component level.
7. Uses product test and measurement equipment, digital/analog voltmeters, oscilloscopes, hi-pot meters, power supplies, and automatic and standard test equipment, etc.
8. Recommends and/or proposes process improvements 
8. Ensures that all relevant quality information/feedback is provided 
10. Utilizes written or visual instructions involving use of quantitative information from specifications, schematics, graphs, pictures, gages, etc.
11. Provides written and/or oral communications concerning a variety of situations following test, troubleshooting, examinations, etc.
12. Keeps workstation, tools and equipment in a neat and orderly manner 
13. Understands and complies with all Company, safety rules and regulations

Requirements/Knowledge: 

v Education Required:
o Associate degree in Electronics (2 year) or certified program (18 mos.) plus 1 year of experience

v Experience 
o 1-3 years of electronics related experience

v Skill Level Required: 
o Skills required in maintaining close specifications using tools & gages, schematics and a variety of electronic equipment 

o Should have a high level of electrical and mechanical aptitude and analytical skills
o Ability to interpret drawing and specifications
o Basic computer skills
o Knowledge of manufacturing processes and how to effectively troubleshoot problems
o Should possess dexterity skills, good hand & eye coordination 
o Willing and able to take and pass basic electronics test 

Desired Qualifications:

v Past experience in a manufacturing environment
v Past experience in a self-directed teaming environment
v Lean manufacturing knowledge
v Understanding of IPC-A-610 standards
 

 
Job Number: 1710063131
Job Location: Bohemia, NY
Duration: 12 months
Input Date: 01/31/2017
Last Updated: 12/10/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Eric Khassanov
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002G9j8AAC&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
ElectroMechanical Engineer - Level III

Description:
ElectroMechanical Engineer - Level III

Orlando, FL
$53.00/Hr
1 Year Contract

MUST HAVE AN ACTIVE SECRET CLEARANCE

1st Shift


Description

Hardware ElectroMechanical packaging design engineer will be responsible for the hardware development for missile and/or fire control electronics: specifically printed wiring board (PWB) and circuit card assembly (CCA) design as well as general packaging support. Activity will require cross functional coordination to complete PWB/CCA hardware design and integration for the designated weapon system. General qualifications: Researches, develops, and designs component, equipment, and networks for military applications. Candidate must have experience CCA and PWB design as well as the associated components and connectors.


Skill/Experience/Education

Mandatory:

Candidate must have a Bachelors degree from an accredited college in a related discipline, Proficient with Pro-E and/or Creo or Catia software.

Desired:

CREO,
 
Job Number: 7719
Job Location: Orlando, FL
Rate: 53.00/Hr
Per Diem: Possible Split
Overtime: Possible
Duration: 1 Year
Start Date: ASAP
Input Date: 10/23/2017
Last Updated: 02/05/2018
Firm Name: INCONEN CORPORATION
Attention: Brad
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electromechanical Design Engineer

Description:
Electromechanical Design Engineer

Location: Orlando, FL
Pay Rate: DOE ($45/hr - $55/hr)
Duration: 1 year W2 contract
Shift: not specified
**MUST be a U.S. CITIZEN**

Duties:
-An Electromechanical Design Engineer is responsible for the design, documentation and production floor support of hardware (missile electronics, missile electrical cabling, airborne support equipment, ground support equipment and test sets).
-Additional duties include investigation of discrepant hardware and test anomalies.

Skills Required:
-Must have at minimum a Bachelor of Science degree in an Engineering related discipline.
-Design experience with electrical cables, test sets, breakout boxes, 19” support equipment rack design
-Proficiency with Creo Parametric 2.0 Cabling and Intralink.
-Proficiency with ASME Y14.5M-1994 and generating detailed engineering drawings.
-Proficiency with reading schematics for electrical cable assemblies in order to define and select connectors, backshells, splices, wiring, etc.
-Basic computer skills and a working knowledge of Microsoft Office products (Word and Excel)
-Compliance to quality and safety policies at all times!
-Must be a US Citizen
-Physical Requirements – This work requires delicate handling, reaching, light lifting and may require a combination of sitting and standing as well as walking between test locations and occasional use of small step-ladders.
DESIGN ENGINEER CREO CABLING ASME/ANSI READING SCHEMATICS

Desired:
-Experience with design of flexible and semi-rigid RF cables

Education:
-Must have at minimum a Bachelor of Science degree in an Engineering related discipline.
 
Job Number: 8364
Job Location: Orlando, FL
Rate: 45-55
Per Diem: Split Possible
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 01/09/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Electronic Troubleshooter

Description:
Tests and troubleshoots electronic products using standard and specialized test equipment. 

1. Troubleshoots electronic products to sub-assembly and component level utilizing schematics and standard troubleshooting practices and procedures 
2. Sets up test equipment and tests electronic products using established test procedures and schematics
3. Provides technical guidance to assemblers and re-work assemblers 
4. Performs cross functional tasks within fairly similar situations resulting in standardized but not identical outcomes

5. Knowledge of the operation and use of electronic production test equipment and hand assembly tools used in a high tech surface mount & through-hole technology manufacturing and production environment
6. Knowledge of advanced electronic test and troubleshooting techniques to component level.
7. Uses product test and measurement equipment, digital/analog voltmeters, oscilloscopes, hi-pot meters, power supplies, and automatic and standard test equipment, etc.
8. Recommends and/or proposes process improvements 
8. Ensures that all relevant quality information/feedback is provided 
10. Utilizes written or visual instructions involving use of quantitative information from specifications, schematics, graphs, pictures, gages, etc.
11. Provides written and/or oral communications concerning a variety of situations following test, troubleshooting, examinations, etc.
12. Keeps workstation, tools and equipment in a neat and orderly manner 
13. Understands and complies with all Company, safety rules and regulations

Requirements/Knowledge: 

v Education Required:
o Associate degree in Electronics (2 year) or certified program (18 mos.) plus 1 year of experience

v Experience 
o 1-3 years of electronics related experience

v Skill Level Required: 
o Skills required in maintaining close specifications using tools & gages, schematics and a variety of electronic equipment 

o Should have a high level of electrical and mechanical aptitude and analytical skills
o Ability to interpret drawing and specifications
o Basic computer skills
o Knowledge of manufacturing processes and how to effectively troubleshoot problems
o Should possess dexterity skills, good hand & eye coordination 
o Willing and able to take and pass basic electronics test 

Desired Qualifications:

v Past experience in a manufacturing environment
v Past experience in a self-directed teaming environment
v Lean manufacturing knowledge
v Understanding of IPC-A-610 standards
 
Tests and troubleshoots electronic products using standard and specialized test equipment. 

1. Troubleshoots electronic products to sub-assembly and component level utilizing schematics and standard troubleshooting practices and procedures 
2. Sets up test equipment and tests electronic products using established test procedures and schematics
3. Provides technical guidance to assemblers and re-work assemblers 
4. Performs cross functional tasks within fairly similar situations resulting in standardized but not identical outcomes

5. Knowledge of the operation and use of electronic production test equipment and hand assembly tools used in a high tech surface mount & through-hole technology manufacturing and production environment
6. Knowledge of advanced electronic test and troubleshooting techniques to component level.
7. Uses product test and measurement equipment, digital/analog voltmeters, oscilloscopes, hi-pot meters, power supplies, and automatic and standard test equipment, etc.
8. Recommends and/or proposes process improvements 
8. Ensures that all relevant quality information/feedback is provided 
10. Utilizes written or visual instructions involving use of quantitative information from specifications, schematics, graphs, pictures, gages, etc.
11. Provides written and/or oral communications concerning a variety of situations following test, troubleshooting, examinations, etc.
12. Keeps workstation, tools and equipment in a neat and orderly manner 
13. Understands and complies with all Company, safety rules and regulations

Requirements/Knowledge: 

v Education Required:
o Associate degree in Electronics (2 year) or certified program (18 mos.) plus 1 year of experience

v Experience 
o 1-3 years of electronics related experience

v Skill Level Required: 
o Skills required in maintaining close specifications using tools & gages, schematics and a variety of electronic equipment 

o Should have a high level of electrical and mechanical aptitude and analytical skills
o Ability to interpret drawing and specifications
o Basic computer skills
o Knowledge of manufacturing processes and how to effectively troubleshoot problems
o Should possess dexterity skills, good hand & eye coordination 
o Willing and able to take and pass basic electronics test 

Desired Qualifications:

v Past experience in a manufacturing environment
v Past experience in a self-directed teaming environment
v Lean manufacturing knowledge
v Understanding of IPC-A-610 standards
 
 
Job Number: 1710066458
Job Location: Bohemia, NY
Duration: 12 months
Input Date: 04/07/2017
Last Updated: 12/10/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Eric Khassanov
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000021ioWAAQ&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer II

Description:
JOB DESCRIPTION
SUMMARY STATEMENT
Applies advanced knowledge of principles, theories and concepts and industry practices and standards related to the design, development, testing, manufacturing, repair and certification of aircraft structures, component parts and related component systems and subsystems for operational aircraft that are consistent with Federal Aviation Administration guidelines.

ESSENTIAL FUNCTIONS AND KEY RESPONSIBILITIES
Develops solutions to a variety of moderate complexity or unusual engineering or technical problems or assignments requiring judgment and ingenuity to work within engineering protocols in the analysis, design and/or repair development of aircraft structures, power plant component parts, mechanical and electrical systems/structures and subsystems for commercial, military, executive, general aviation, or special purpose applications on operational aircraft.

Analyzes and interprets engineering proposals and documentation such as drawings, material and product specifications, structural repair manuals (SRMs), component maintenance manuals (CMMs) and illustrated parts lists (IPLs/IPCs) to develop design and/or repair schemes approaches. Confers with management to clarify or resolve problems.

Designs and develops and/or repairs of structural, power plant and other operational and structural components that are used in operating aircraft. This includes producing or assisting in the production of computer aided drawings and engineering reports.

Develops design and/or repair data packages and obtains FAA approvals through internal and external FAA Designated Engineering Representatives (DERs); troubleshoot failure modes, communicate and interact with customer engineering groups and/or internal personnel for design, development and/or cost effective repair schemes and approvals.

Designs and develops analytical programs concerned with ground or flight testing, or development of acoustic, thermodynamic, or propulsion systems.

Tests models, prototypes, subassemblies, or production items to study and evaluate operational characteristics and effects of stress imposed during actual or simulated operational conditions.

ANCILLARY FUNCTIONS AND RESPONSIBILITIES

Performs other duties as required. These duties may include assignments in job classifications other than the primary assignment.

JOB QUALIFICATIONS
FORMAL EDUCATION, TRAINING, PROFESSIONAL CERTIFICATION AND WORK EXPERIENCE
Experience may be substituted for the formal education and training requirements in this section at the discretion of management. Technical Bachelor level degree in Engineering or the sciences or equivalent and three (3) to six (6) years related experience and/or training; or equivalent combination of education and experience.

LEVEL OF SUPERVISION REQUIRED
Works under general supervision. Sound judgment, completeness and accuracy are expected.

STANDARD JOB REQUIREMENTS
• Must be able to arrive to work on time and attend regularly
• Must be able to fluently read and write the English language, perform basic mathematical calculations and interpret and comprehend company policies, procedures, safety instructions and other like documents.
• Competent in the use of standard software applications such as Microsoft Word and Excel and operate standard office equipment
• Communicate effectively using electronic media and in written and verbal forms
• Above average communication skills, tailoring to technical and non-technical audiences
• Make telephone and direct personal contact with internal and external personnel and make formal presentations to small or large groups.

SPECIAL TRAINING AND BEHAVIORAL COMPETENCIES
The following training requirements and competencies must be met before acceding to this job.
• Safety training applicable to the job and work area.
• Complete the required CLIENT University training for all Stakeholders.
• Comply with The CLIENT Leadership Competencies for Stakeholders.
• Ability and willingness to assist and transfer technical knowledge to less experienced Stakeholders.

PHYSICAL REQUIREMENTS
While performing the duties of this job, the Stakeholder is frequently required to sit and talk and hear. The Stakeholder is occasionally required to stand; walk; reach with hands and arms; and stoop, kneel, crouch, or crawl. The Stakeholder must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, color vision, and ability to adjust focus. Must be able to travel between facilities and operate standard office equipment. Work in excess of eight (8) hours per day and five (5) days per week as required. Must be able to ascend and descend stairs.

WORK ENVIRONMENT
While performing the duties of this job, the Stakeholder is occasionally exposed to moving mechanical parts, fumes or airborne particles, toxic or caustic chemicals, and outside weather conditions. The noise level in the work environment is usually moderate.

MENTAL REQUIREMENTS
Able to work as a team member, highly organized, work well under stress and handle multiple priorities. Must possess interpersonal and communication skills to interact with other people.
 
Job Number: 17-802-13920
Job Location: Midwest
Rate: Mid 70's
Per Diem: No
Overtime: Possible
Duration: Direct
Start Date: ASAP
Input Date: 03/21/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Technician

Description:
Our client, a market leader and technology innovator, is seeking talented professionals to deliver cutting edge solutions to their customers. Well-respected, with a global presence, our client consistently offers a powerful and robust portfolio of products, services and solutions that help customers successfully execute their missions in today’s dynamic environment. With unsurpassed engineering, using an open systems approach, our client solves the nation’s most complex challenges while foreseeing future needs.

Engineering Technician
(US Citizenship Required*)
Scottsdale, AZ
2017-5043

Responsibilities:
The Engineering Technician will primarily perform hardware integration and test of highly complex, highly-reliable spaceflight payload electronics. Tasks also include
• Align, test, troubleshoot, analyze data, and technical evaluation of Digital and RF modules.
• Develop and prepare reports and procedure documentation
• Second and/or third shift coverage will be required for most assignments.

Qualifications:
• Required – Active Secret Clearance. Only candidates with an active clearance will be considered.
• Strong background in electrical test techniques.
• High level of understanding of product specifications.
• Proficient in using test equipment such as network analyzers, spectrum analyzers, logic analyzers, oscilloscopes, and signal generators is required.
• Able to read and follow detailed work instructions and/or test procedures.
• Has a solid understanding of the job skills and learns company policies and procedures to complete routine tasks

*US Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
Associate's degree in related discipline or equivalent is required plus a minimum of 3 years of relevant experience

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!


PLEASE APPLY ONLINE HERE: https://careers-moseleytechnical.icims.com/jobs/5043/adv-engineering-tech-2/job?mode=view
 
Job Number: 2017-5043
Job Location: Scottsdale, AZ
Duration: 12 Months
Input Date: 12/27/2017
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Bob Jones
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
FPGA Engineer

Description:
FPGA Design Engineer position is responsible for electronics & FPGA design and implementation in support of video & image processing.

- Implement video and image processing pipeline in FPGA fabric
- Review requirements; work on architecture and design details for FPGA & processor implementations
- Select existing IP blocks that can be used and write own IP blocks where needed
- Create correct design constraints to avoid timing issues for each block and for the complete design
- Implement different video and image processing algorithms on FPGA
- Develop test environments on FPGA and perform testing
- Develop firmware on real-time operating system (RTOS) and with Linux environment

- Experience with designing ARM processors and AXI bus with Zynq Ultrascale+ MPSoC or understanding of similar SoC FPGA architectures, including the PS-PL interfacing, either on bare-C or OS based designs
- Experience with industry-standard protocols, such as PCIe, USB, Ethernet, DDR, I2C, SPI, CAN, etc.
- Experience with generic video and camera interfaces such as LVDS, HDMI, Display Port, Camera Link, SDI, GigEVision, etc.
- Experience with Vivado and Xilinx SDK
- Experience writing RTOS and Linux device drivers for embedded vision systems
- Hands-on experience in digital system design using VHDL and Verilog and FPGA-based system bring-up and debugging
 
Job Number: 41206
Job Location: MI
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 12/21/2017
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
HVAC Engineer

Description:
HVAC Engineer

Cape Canaveral, FL
1 Year Contract
Pay Rate: DOE

Job Description / Responsibilities:

The Mechanical HVAC Engineer will produce moderately-complex technical designs and some analysis mechanical to new and existing facility related systems in support of ULA Atlas V, Delta IV and future Vulcan Launch Operations at Cape Canaveral Air Force Station Florida. The successful candidate, as part of ULA’s Engineering and Infrastructure Team, shall be required to produce accurate and detailed design drawings as well as generate validating system analysis calculations. He/she will gather information, perform field walk-downs, and create or revise electronic CAD files. Projects typically involve implementations being performed by external Contractors, in accordance with construction documents.

The successful candidate should have at least 15 years of relevant experience in designing, building, modifying, testing and maintaining commercial and industrial HVAC systems. Experience with chilled water and DX systems, ventilation and air distribution required. Engineer shall perform engineering thermodynamic, heat transfer and fluid/gas dynamic calculations. Apply knowledge of regulatory and certifying agency requirements to ensure product and/or service is in compliance. Apply knowledge of functional testing requirements to ensure product and/or service meets or exceeds customer expectations. Project support will also include generation of Statement of Work, Contractor contract documents for schedule integration, fabrication and installation phases. The successful candidate will be required to coordinate multiple construction activities and project schedules around launch activities. The successful candidate should be self-motivated and able to work productively without constant direct supervision. He/she will be given latitude to establish priorities, determine technical objectives and define the most efficient approaches to completing assignments. Some outside work climbing stairs and accessing ladders will be required. He/she may need to work at heights on launch structures and facility catwalks. The successful candidate shall be willing to support second/third shifts and weekends as required.

Skills:
This position requires expert knowledge of mechanical design, analysis and drafting practices and a sound practical knowledge of engineering principles, practices, and industry standards. At least 10 years of recent Autodesk AutoCAD experience. Other 3D modeling and design experience in Autodesk Revit or other Building Information Modeling (BIM) software is highly preferred.

Educational and Professional Qualifications:
A Bachelor’s degree from an accredited college in Mechanical Engineering and 15 years of applicable experience is preferred. A related discipline degree, or equivalent experience/combined education, with 10+ years of professional experience shall also be considered. Professional Engineering registration in the State of Florida is preferred, although not required.
 
Job Number: 8429
Job Location: Cape Canaveral, FL
Rate: DOE
Per Diem: Possible Split
Overtime: Exempt
Duration: 1 Year
Start Date: ASAP
Input Date: 12/19/2017
Last Updated: 02/14/2018
Firm Name: INCONEN CORPORATION
Attention: Brad
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Instrument Project Engineer - Refinery Exp (TX)

Description:
THIS IS NOT FOR AN INTERN, THIS POSITION REQUIRES AT LEAST 10-15 YEARS OF EXPERIENCE.

Basic Function
An Instrument Project Engineer (IE) is responsible for the design and implementation of process instrumentation from initial conception through field installation. They are responsible for designs that provide the most reliable and cost-effective instrument systems. In addition, the IE provides consulting services to process designers in developing process design specifications, develops operating and training manuals for mechanical and process personnel and participates in training operating personnel.

An IE:
• Writes purchase and construction specifications and writes and performs Factory Acceptance Tests.
• Uses vendor software programs for sizing safety and control valves.
• Specifies, procures, and configures Programmable Logic Controllers (PLC) and field hardware such as transmitters, controllers, pneumatic and electronic transmission system.
• Utilizes standards and best practices from American Petroleum Institute (API) and International Society of Automation (ISA), National Fire Protection Association (NFPA) to perform the above functions.

Responsibilities.
The Instrument and Controls Engineer may be responsible for:
• Function as project engineer on instrumentation and capital projects and large maintenance projects.
• Taking lead role on Instrumentation and controls capital projects including PLCs.
• Help identify areas where instrumentation/controls can improve plant operations and profitability.
• Developing capital and expense budget requirements related to instrumentation system upgrades, PM/PdM programs, repairs, expansions, etc.
• Serving as a technical resource to properly identify new and existing equipment specifications and proper operating parameters/ranges for instrumentation equipment.
• Overseeing application and interpretation of National Electric Code and other applicable city, state, federal codes and standards (e.g. NPRA, NFPA, API, ISA).
• Interact with Engineering and Construction contractors, both on-site and off-site.
• Leverage the application of instrumentation safety standards, mechanical integrity, design and maintenance.
• Using documentation systems and processes that maintain accurate instrumentation information and drawings.
• Support criticality assessments of the plant's instrumentation equipment.
• Design and evaluate Refinery Safety Instrumented Systems (SIS). Perform Safety Integrity Level (SIL) analysis and engineering upgrades of safety instrumented systems.

Basic Required Qualifications.
• Must be legally authorized to work in the United States, at least 18 years of age and possess a valid driver’s license.
• Must possess a bachelor’s degree in Electrical Engineering, Chemical Engineering, Mechanical Engineering, or Industrial Engineering.
• Must have three or more years of instrumentation experience and three or more years of direct experience in a refinery, chemical and/or manufacturing industry.
• Demonstrated knowledge and use of SPI (InTools) database and specifications.
• Proficient in the specification, troubleshooting, maintenance and overhaul of process control values.
• Demonstrated knowledge of PLC's.
• Proficient in MS office (Word, Excel, Outlook, Projects).
• Must be willing and able to perform, comply with the following:
• Wear Nomex fire retardant clothing and personal protective equipment (such as steel-toe shoes, ear, and eye protection).
• Maintain face daily so that a respirator/face mask can seal properly (some examples include being free of facial hair and/or clean shaven), climb up to 200 feet in height and work in enclosed spaces such as tanks and silos

Preferred Qualifications:
• Industry certifications (ISA)

FOSTER DESIGN'S BENEFITS:
• Working for a 54-year old company
• Minimum 10 Paid Holidays with no waiting period
• Immediate 401K participation, 1 year 100% vesting schedule, matching employer contribution
• Free Financial Consultant
• Medical/Dental/Vision/Prescription card – BCBS
• MetLife – Long Term Disability Insurance
• Vacation Pay
• Per Diem Assignment Allowance, when applicable
• Per Diem Split, when applicable
• Paid Weekly (Direct Deposit)
 
Job Number: FD-021618TX
Job Location: Borger, TX
Rate: $BOE/HR
Per Diem: Possible
Overtime: Possible
Duration: 11 Months or linger
Start Date: 03/26/2018
Input Date: 03/08/2018
Last Updated: 03/21/2018
Firm Name: FOSTER DESIGN INC
Attention: Recruiter
Address: 200 W DOUGLAS AVE STE 110
City, State: WICHITA, KS 67202
Phone: 316/832-9700
800 Phone: 800/345-3394
Fax Phone: 316/832-9357
Website: www.fosterdes.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Laboratory Administrator

Description:
Laboratory Administrator
(Supporting the Mechanical Engineering Labs)

Location: Orlando, FL
Pay Rate: DOE ($17/hr - $23/hr)
Duration: 1 year W2 contract
Shift: First, 9/80, no OT
**MUST be a U.S. CITIZEN**

Job Description:
The position is for a laboratory administrator located within the Mechanical Engineering Labs in the Mechanical Engineering department.
The overall primary job responsibility is to work with labs and internal customers to ensure laboratory work requests are submitted properly, routed to the correct lab, and closed out and archived once the work is complete
A key job function will be to help and support the new electronic work request interface. This will require a working knowledge of Microsoft SharePoint design and administration, as well as Microsoft Access database management.
Additional job duties will include placing and tracking purchase requests, managing chemical inventories, and updating individual lab SharePoint websites.
This position is customer focused, highly visible, and will be essential in growing and modernizing lab operations. The position reports to the Test and Special Processes Lab Group Manager, under the ME Labs Senior Manager, operating as a key section of the Mechanical Engineering Directorate within Engineering and Technology.

Basic/Mandatory Qualifications:
• Excellent organizational and clerical skills.
• Familiarity with Microsoft SharePoint, SharePoint Designer, and InfoPath with the ability to become a SharePoint super user.
• Familiarity managing Microsoft Access databases with ability to learn more advanced functions.
• Capable of scheduling, de-conflicting, and coordinating multiple lab activities concurrently.
• Very proficient in computing within a Windows-based MS Office-suite centered environment for communication, scheduling, data processing, and basic data transfer.
• Demonstrated sound writing and verbal communication skills.
• Minimum of a AA degree
• Able to obtain a DoD Secret Clearance.

Desired Skills:
• Demonstrated experience creating, modifying, and managing Microsoft Access databases.
• Demonstrated experience creating, modifying, and managing Microsoft Share Point sites.
• BS degree
• Current DoD Secret clearance.
 
Job Number: 8141
Job Location: Orlando, FL
Rate: 17-23
Per Diem: Split Possible
Overtime: No
Duration: 1 year
Start Date: ASAP
Input Date: 12/04/2017
Last Updated: 01/03/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MP&P Engineer 2

Description:
MP&P Engineer 2

Location: Huntington Beach, CA
Duration: 12+ months

Description:
Client Research & Technology is seeking a Materials, Process and Physics Engineer to function out of the Huntington Beach, California location.
The main focus of this job is to perform cross-sectioning and metallography. The position requires metallurgical and metallographic knowledge of various metals, ceramics, composites, and electronic components like diodes, capacitors, inductors, integrated circuits, transistors, etc. Some experience in the disassembly of electronic devices, such as delidding and decapsulation, is also preferred.

Responsibilities include the following:
- Assess electronic components, circuit card assemblies (CCA), and printed wiring boards (PWB) for defects and/or failures.
- Cross-section components, CCAs, and PWBs - Mount and polish using various polishing materials.
- Use metallographs to take high resolution images for analysis.
- Look for cracks, voids, and solder voids and fillets.
- Perform fracture analysis if needed.
- Analyze data, make recommendations, and write comprehensive reports.
- Coordinate and implement new engineering principles, theories, advanced technologies and concepts.
- Maintain laboratory supplies and order as needed.
- Implement lean principles and technologies.

Education / Experience:
Bachelor's degree and 2 or more years' experience or a Master's degree with experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. Preferably experience in cross-sectioning and metallography, familiarity with electronic components, CCA, and PWBs, have some knowledge of metallurgy and chemistry, and excellent verbal and written communication skills.

Skill Code: 6B2-Electrical MP&P
 
Job Location: Huntington Beach, CA
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 months
Start Date: Asap
Input Date: 12/21/2017
Last Updated: 01/19/2018
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer (PWA and LRU Assembly) CA

Description:
13701

Title TEMP Staff Manufacturing Engineer (PWA and LRU Assembly)
Job Summary General Atomics Aeronautical Systems, Inc. (GA-ASI), an affiliate of General Atomics, is a world leader in proven, reliable remotely piloted aircraft and tactical reconnaissance radars, as well as advanced high-resolution surveillance systems.

We recognize and appreciate the value and contributions of individuals with diverse backgrounds and experiences and welcome all qualified individuals to apply.

Support the design (DFM), first article, production, test, and system integration of Printed Wiring Assemblies and Line Replaceable Units for all UAV platforms including Ground Control Stations (GCS). Assemblies will include surface mount as well as through hole technology and mechanical assembly.

Duties and Responsibilities •Responsible for manufacturing process development, implementation, and continuous improvement to enhance Quality / Yield, reduce Cost, and improve Productivity / Schedule. Initiate and lead lean manufacturing process improvement projects.
•Specify and implement automation equipment and processes.
•Identify and assist in addressing safety issues on the manufacturing floor.
•Support manufacturing production planning and coordination, execution and operations process development.
•Provide production support to assemblers and leads.
•Document manufacturing processes and assembly work instructions in conjunction with T&O Planning.
•Design shop aids and tooling to assist production.
•Disposition non-conforming parts, identify root cause, and implement corrective and/or preventive action to reduce scrap and rework.
•Collaborate with Design Engineering during prototype, development and first article manufacturing.
•Expertise in assembly methods and processes, including surface mount technology, through hole technology, mechanical assembly, and testing. Experience in both analog and digital technologies as well as a background with RF.
•Experience with development and deployment of manufacturing automation and remaining current with technology.
•Experience with Electrical Schematics and Circuit Diagrams; Drawings and BOMs; Assembly Instructions; Engineering Change systems; Quality systems for non-conforming parts and corrective action. Experience with Lean Manufacturing methodologies for waste reduction, e.g.: 5S, Standard Work, TAKT, Pull System, 5S, Value Stream Mapping, cell design, and manufacturing flow.
•Clearly and effectively communicate both verbally and in written form to both technical and non-technical audiences, especially regarding manufacturing processes, engineering issues and proposed changes, and quality issues and dispositions.

Qualifications Essential Qualifications Typically requires a bachelors degree, masters degree or PhD in engineering or a related technical discipline from an accredited institution and progressive engineering experience as follows; nine or more years of experience with a bachelors degree, seven or more years of experience with a masters degree, or four or more years with a PhD. May substitute equivalent engineering experience in lieu of education. Demonstrates an extensive technical expertise and application of engineering principles, concepts, theory, and practice with the ability to organize, plan, schedule, conduct, and coordinate workloads to meet established deadlines or milestones with some experience in project leadership. Must possess the ability to understand new concepts quickly and apply them accurately throughout an evolving environment. Strong communication, presentation, and interpersonal skills are required enabling an effective interface with other departments and/or professionals, and capable of representing the organization as a prime technical contact, as well as providing leadership and guidance to less experienced professionals. Customer focused, formulates plans based on the development of innovative new designs in resolving advanced technical engineering problems. Must be able to work both independently and in a team environment. Able to work extended hours as required. A Professional Engineering License, original work(s) published in professional engineering journals, and invited to present one or more original works to an engineering symposium are desirable.
Additional Qualifications Typically requires a bachelors degree, masters degree or PhD in engineering or a related technical discipline from an accredited institution and progressive engineering experience as follows; four or more years of experience with a bachelors degree or two or more years of experience with a masters degree.
•Experience with IPC & MIL standards, including: IPC/WHMA-A-610 and 620 , J-STD-001 – Requirements for Soldered Electrical and Electronic Assemblies, MIL-STD-1553 – Digital Time Division Command/Response Multiplex Data Bus, MIL-STD-1760 – Aircraft Electrical Interconnection System, SAE-AS39029 (MIL-C-39029)– Experience implementing capital equipment in factory environment.
•Experience with MRP systems, eg SAP or MTO/WDS. Experience with Microsoft Office Project and Visio.
•Experience with programming.
•Experience with databases, e.g. Oracle and FileMaker. Knowledge of SQL.
•Experience with process mapping and demand flow technology
•Strong background in electro-mechanical assemblies.
•Six Sigma Green Belt
City San Diego
State California
Travel Percentage Required 0% - 25%
Clearance Required? No
Work Schedule Rule 9/80
Temp Assignment Duration (# of Days) 180
 
Job Number: JE-13701
Job Location: San Diego, CA
Duration: 6 month contract
Input Date: 03/05/2018
Last Updated: 03/12/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Planner III & IV - Electrical/Electronics - (WA)

Description:
SEVERAL OPENINGS IN THE EVERETT & RENTON, WA AREAS.

Manufacturing Planners with Electrical/Electronics experience.

- Develop, implement and maintain various manufacturing plans, Bill of Materials, work instructions and illustrations to define and document as-built configuration.
- Assist with development and integration of suppliers, processes, materials, data and technology to meet manufacturing and delivery requirements.
- Assist in reviewing supplier data to ensure manufacturing related requirements are met.
- Identifies tooling requirements and initiates tooling orders based on manufacturing and engineering requirements.
- Assist in tooling dispositions.
- Investigate and resolve manufacturing related issues of limited scope.
- Assist with producibility assessments for part or product designs.
- Assist in providing input to design, manufacturing processes and manufacturing technologies to meet cost and schedules.
- Develop work statements and sequencing of events to support delivery commitments.
- Assist in the review, maintenance and monitoring of internal documents.
- Provide ship side support, research and shop assistance

Preferred Qualifications:

- Basic understanding of wiring and wire routing
- - Experience with wire bundle fabrication concepts, wire installation, electrical equipment installation and installation of wiring provisions.
Experience in Teamcenter
- Experience using Manufacturing Execution Systems (CMES)
- WIRS: Wires Information Release System
- CAPP II

AA degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience.

ACS Group (formerly 'Comforce')
 
Job Number: MPEEwa
Job Location: Renton & Everett, WA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 9+ Months
Start Date: ASAP
Input Date: 05/16/2018
Last Updated: 06/15/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer

Description:
Mechanical Engineer

Cape Canaveral, FL
1 Year Contract
Pay Rate: DOE

Job Description / Responsibilities:
The Mechanical Engineer will produce moderately-complex technical designs and some analysis mechanical / structural modifications to new and existing facility related systems in support of ULA Atlas V, Delta IV and future Vulcan Launch Operations at Cape Canaveral Air Force Station Florida. The successful candidate, as part of ULA’s Engineering and Infrastructure Team, shall be required to produce accurate and detailed design drawings as well as generate validating stress analysis calculations. He/she will gather information, perform field walk-downs, and create or revise electronic CAD files. Projects typically involve implementations being performed by external Contractors, in accordance with construction documents. Project support will also include generation of Statement of Work, Contractor contract documents for schedule integration, fabrication and installation phases. The successful candidate will be required to coordinate multiple construction activities and project schedules around launch activities. The candidate shall possess and apply knowledge and technical expertise to the design, analysis, and maintenance of facility related mechanical and electromechanical products and systems. The successful candidate should have at least 10 years of relevant design and analysis experience in building and/or modifying large industrial facility mechanical systems. The desired experience shall be in the following areas; water piping and plumbing, mechanical hydraulic systems, fire protection systems and light structural design. A smaller percentage of the work will involve the design and analysis of facility HVAC systems and mechanical components of support equipment and facility platform systems.

Skills:
This position requires knowledge of predominantly mechanical design, analysis and drafting practices and a sound practical knowledge of engineering principles, practices, and industry standards. At least 10 years of recent Autodesk AutoCAD experience. He/she shall have analysis experience using STAAD and/or RISA, Femap – NX Nastran and be able to create stress calculations by hand with Excel or MathCAD. Other 3D modeling and design experience in Autodesk Inventor, Autodesk Revit or other Building Information Modeling (BIM) software is highly preferred.

Educational and Professional Qualifications:
Bachelors degree from an accredited college in Mechanical Engineering is preferred. A related discipline degree, or equivalent experience/combined education, with 10+ years of professional experience. Professional Engineering registration in the State of Florida is preferred, although not required.
 
Job Number: 8430
Job Location: Cape Canaveral, FL
Rate: DOE
Per Diem: Possible Split
Overtime: Exempt
Duration: 1 Year
Start Date: ASAP
Input Date: 12/19/2017
Last Updated: 02/14/2018
Firm Name: INCONEN CORPORATION
Attention: Brad
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
NX Electrical Engineer - Automotive

Description:
Design and develop vehicle 3D wire harnesses, clipping and brackets to mount components and systems using Siemens NX CAD..
Coordinate and execute the packaging development and documentation for all Mechatronics owned electrical /electronic devices and their mounting systems.
Create and maintain detailed part and assembly drawings.
Assist with selection of proper materials, tolerances, finishes, fasteners and production methods.
Analyze and provide creative, technically sound solutions to problems encountered in validation and production.
Apply Client and industry drafting and design standards, including GD&T.

BASIC QUALIFICATIONS:

Mechanical or Electrical Engineering degree or related engineering degree preferred but not required.
Siemens NX CAD experience required.
Create 3D wire harnesses, clipping and brackets to mount electrical components.
CHS Capital Harness experience preferred.
Previous electrical and electronics packaging experience preferred.
A general knowledge of automotive systems preferred.
Excellent verbal and written communication skills, as well as personal computer office automation skills are required.
 
Job Number: 3312
Job Location: Portland, ORE
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 1+ year
Start Date: ASAP
Input Date: 12/27/2017
Firm Name: OLSA RESOURCES INC
Attention: Dina Matar
Address: 3836 N BALLAST ST
City, State: PORTLAND, OR 97217
Phone: 503/608-7895
Fax Phone: 503/608-7896
Website: www.olsaresources.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Production Operator 2

Description:
A Fortune 500 and worldwide leader in business aviation; specializing in Command and Control, Communications Networking, Rugged Computing, Information Assurance and Cyber Defense is searching for the right talent to fill this opportunity:

Production Operator 2
(U.S. Citizenship Required*)
Scottsdale, AZ
2017-4796

This position will include working inside and outside of military vehicles making modifications, running cables, using all types of both hand and power tools.

Responsibilities:
• Performs project tasks/assignments of a basic nature ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and subassemblies such as modules, boards, panels, drawers, frames, and cables
• Follows methods, techniques, and sequence of operations in performing wiring, component installation, hand soldering, & cable harnessing on subassemblies and units
• May be involved in packing tasks; may count and sort various product items, placing labels on packages, put manuals into binders, and form or break down boxes for the final product
• May conduct manufacturing inspections on processing line to quality specifications
• May disassemble, modify, rework, reassemble, and test experimental or prototype assemblies and subassemblies according to specifications and under simulated conditions
• Contacts are primarily within immediate work unit and direct supervisor
• Maintains a clean and orderly work area
• Work is closely supervised, following detailed instructions, and periodic checking on work performance

Qualifications:
• Able to work in tight spaces, work from elevated platforms, and lift 25lbs.
• Able to learn job skills and become familiar with company policies to complete assignments
• Able to use hand/torque tools, soldering irons, other light industrial tools
• General communication and interpersonal skills
• Able to set up basic equipment and process hardware compliantly to specifications
• General knowledge of measuring equipment and math, communication and interpersonal skills, and computer skills/literacy

*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
High School Diploma or equivalent is required

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!

TO APPLY, PLEASE VISIT OUR WEBSITE: https://careers-moseleytechnical.icims.com/jobs/4796/production-operator-2/job?mode=view
 
Job Number: 2017-4796
Job Location: Scottsdale, AZ
Input Date: 12/22/2017
Last Updated: 12/29/2017
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Bob Jones
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Manager II - Linux, Embedded C/C++

Description:
The Project Manager II will lead a cross-functional team responsible for managing Engineering activities required to fulfill commitments for an airline customer program.

The role requires excellent communication skills, ability to see the “big picture”, and ability to direct efforts appropriately on prioritized tasks.

Responsibilities include the following:
• Participate in the development and analysis of customer requirements.
• Identify all customer deliverables which may include production items (mechanical, electronic and/or electro-mechanical assemblies), software, media, customer racks, documentation and systems.
• Identify internal deliverables which may include plans, schedules and other documents, prototypes, test equipment, software, test racks and more.
• Identify and secure resources required for all project tasks.
• Lead the team to establish a comprehensive, end-to-end project plan and schedule to which the team has “buy-in”.
• Maintain and manage to the project plan and schedule.
• Lead the team to coordinate design, development, documentation, integration, test and certification activities across functional groups to meet committed deliverables to customer schedule, cost and technical requirements.
• Coordinate the procurement and selection of parts, materials and components with suppliers.
• Manage third party development.
• Coordinate pre-production and design transfer to manufacturing.
• Coordinate initial customer deliveries.
• Apply standard techniques, procedures, processes and criteria to engineering assignments.
• Conduct well planned, effective meetings which drive actions.
• Continual process improvement.

Qualifications Required:
• B.S. degree or higher in Computer Science, Computer Engineering or a related field of study.
• Minimum 15 years of software and/or hardware engineering development experience (LINUX & EMBEDDED C / C++).
• At least 10 years of experience in project management of software, electronics, mechanics, and/or circuit design Must have excellent communication skills MS Office 2003 & MS Project.
 
Job Number: 361528
Job Location: Calabasas, CA
Rate: Open
Per Diem: None
Duration: Permanent
Input Date: 10/25/2017
Last Updated: 01/19/2018
Firm Name: JOHNSON SERVICE GROUP
Attention: Sidney Williams
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Manager III Technical ( Plymouth, MN ) 7851097

Description:
Project Manager III Technical ( Plymouth, MN ) 7851097
5 month plus contract

Pay rate: $50 - 75 /hr depending on experience


**Will develop special test equipment. Need asst. tracking projects and scheduling tasks (juggling ~15 programs.) Will use a system to help manage workloads/deadlines.
Will Set up the Master Project Plan. Bachelors is important (Electrical Eng.) Labview exp key, PMP Cert REQUIRED.
Military exp is helpful. Should have exp in a relevant industry.
Will need to meet basic quals. listed below. In interview, will ask about exp w/ tools listed below.
Will ask if have designed electrical circuit boars, use of tools, and level of knowledge.
Will ask about Labview - installation, programming, and architecture. If have military exp, will ask about results achieved.

Program team consists of ~9 test eng. supporting ~12 programs at a time. Will report to Dir. of Eng and get direction from a Prog. Mgr.**

Creates, maintains, and tracks projects for special electronic and guidance subsystem test equipment. Ensures project content is delivered on-time and within budget. Assembles a resource-loaded master schedule for all projects in the special test equipment team and identifies recommended actions for resources and schedule. Prepares reports for upper management regarding status of projects.

Required qualifications:
Bachelor's degree
PMP certification
2 years experience as a project manager or program manager
U.S. citizen

Preferred qualifications:
Bachelor's degree in Electrical Engineering
5 years experience as a project manager or program manager
Experience as non-commissioned officer in the military
Experience in LabView programming
Experience managing projects in the aerospace or defense industries
Ability to travel 10-25% of the time within the US for launch events
 
Job Number: 7851097
Job Location: Plymouth, MN
Rate: 75
Per Diem: Split
Overtime: YEs
Duration: 5 month
Start Date: ASAP
Input Date: 01/01/2018
Firm Name: TALENTPRO CONSULTING
Attention: Tim
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X101
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
QA Certification Specialist II

Description:
QA Certification Specialist II

Location: Savannah, GA
Pay Rate: $50/hr
Duration: Long Term Contract
Shift: First, Flexible Schedule

Unique Skills:
-Working knowledge of FAA regulations and Aircraft Certification processes in a Type Certificate program.
-Detail oriented and able to evaluate data for inconsistencies within tables, reports, technical documentation and other records required to support conformity process.
-Flexibility to work varied hours or weekends as necessary to support aircraft testing schedule.
-Prepares reports, creates test tracking using data from various company systems.
-Experience working with SAP, Solumina, SmarTeam and MS Excel desired.
-Demonstrated experience with data validations, data integrity and regulatory reporting desired

Education and Experience Requirements:
Bachelors degree in Engineering, aviation sciences, quality systems or related field; or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Two years related technical experience of continually increasing responsibility.

Position Purpose:
In a team oriented environment, performs all tasks in area of responsibility in a timely and efficient manner to support aircraft certification activities performed by FAA Principle Inspectors or Company ODA IARs. Ensures the article and all associated data supports and presented for certification meets requirements in accordance with the approved Quality Assurance System and the ODA (ODA-511131-CE) Operations Manual.

Principal Duties and Responsibilities/Essential Functions:
1. Coordinates article & aircraft certification activities to program schedule and milestones.
2. Manipulates and maintains large data sets related to configuration, article traceability and conformity of aircraft to determine status and compare to schedule and objectives.
3. Prepares and/or reviews data packages prior to submission in accordance with ODA/FAA requirements.
4. Performs data evaluation, interrogation and correlation of data between electronic systems.
5. Identifies abnormal data trends or changes, works with internal and external organizations to facilitate resolution.
6. Interprets engineering configuration data relative to manufacturing planning and deviations.
7. Monitors completion of certification tasks to ensure completion to program requirements and schedules.
8. Participates in team process improvement team projects both internal and external to quality.

Additional Functions:
1. Actively engaged and completes process improvement projects related to achieving improved quality or efficiency within their area of responsibility.
2. Actively supports corporate initiative in resource sustainability and business continuity.
3. Promotes, encourages and supports continuous improvement culture.
4. Performs other duties as assigned.

Other Requirements:
1. An Airframe and Powerplant (A&P) license is not required but may be used in combination with four (4) years of related quality experience (in addition to the experience requirements below) to offset the Bachelors degree.
2. ASQ certification (CQE) and/or experience as a FAA recognized airworthiness designee highly preferred.
3. Current/prior authorizations as an FAA IAR/DMIR/ODAR or DAR is preferred.
4. A&P license preferred.
5. Understands and is able to apply and communicate to others: blueprints/specifications, Federal Aviation Regulations, Quality Control System Requirements.
6. Computer literate-capable of working within the various software applications utilized throughout the corporation.
 
Job Number: 7910
Job Location: Savannah, GA
Rate: 50.00
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 03/07/2018
Last Updated: 03/07/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
SD-Tech Pubs-LSA-3.Advanced

Description:
The Canadian Maritime Helicopter Program (CMHP) Program is looking for a talented and motivated Logistics Support Analyst to support the development and sustainment of the CMHP CH-148 Publications. Candidate will report directly to the CMHP Integrated Product Team (IPT) Lead - LSA personnel. The maintenance program is developed in the Client
Maintainability System (SAMS) and provides the framework for the maintenance publications. The Technical manual series for this program is prepared in accordance with S1000D authoring specification and delivered in an Interactive Electronic Technical Manual (IETM) product. This IETM contains principles of Operation, Maintenance, Illustrated parts Breakdown, and
Testing/Troubleshooting procedures inclusive of system diagnostics.

The primary purpose of the Logistic Support Analysis process is to provide up-front design influence to enhance overall aircraft supportability and operational readiness, while reducing the life cycle cost. The overall objectives of the Logistic Support Analysis are to establish, validate and update the maintenance concept for the entire aircraft life cycle.

The Logistic Support Analyst position requires technical knowledge of the UH-60/S70, SH-60/S70B, S-92/H92 helicopters with experience involving a broad knowledge of Helicopter / Aircraft mechanics, electrical/electronics maintenance and support functions including Component Inventory, Trade Studies, Data Analysis, and Modeling. The position also involves the application of Logistic principles to support Helicopter Maintenance and related support functions which includes Electrical / Electronic/Mechanical System Operational Analysis, and Maintenance Tasking. Familiarity with engineering drawing interpretation, maintainability and reliability principles, assembly and disassembly methods and manufacturing and inspection methods is required.
 
Job Number: 17-705-1514
Job Location: Northeast
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 03/21/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer with active secret CA

Description:
160423
Requirement #AERO-REQ-0663
Work Location Palmdale, CA
Work Week 9/80
Priority High
Needed Date 09/25/2017
End Date 06/25/2018
Number of Resources 1
Security Clearance Secret


Title: Software Engineer
Description
The Skunk Works (Lockheed Martin Advanced Development Programs) is seeking world class talent in Mission Systems and Software to be a part of a team that will carry on our 70 year tradition of making history in advanced aircraft development. The selected applicant will utilize advanced technical concepts in support of software products within Advanced Development Programs (ADP). The applicant will be responsible for the design, development, integration, and testing of airborne avionics embedded software, ground-based application software, and/or simulation software. Applicant must be able to support the full software development life cycle – including requirements and configuration management - and work in a mature software process environment. The position requires interfacing with various disciplines, including Systems Engineering and Integration & Test. Applicant must be capable of independently designing and creating software solutions based on limited information on rapidly evolving projects. This role requires a highly motivated, organized engineer that is familiar with all aspects of mission systems development. Applicant must have excellent oral and written communication skills. The applicant may gain experience in avionics subsystems such as navigation guidance, data links, communication links, stores management, weapons integration, mission computers, electronic warfare, serial interfaces, analog and digital I/O, and networking.
Skill/Experience/Education
Mandatory:

Development of Real-Time Operating Systems (RTOS) or usage of embedded real-time systems; Experience with C or C++; Experience with Guidance, Navigation, and Control (GNC) systems; Experience with IMU or GPS systems
Desired:

Demonstrated experience with the following: - Software AGILE process - Configuration management - Rhapsody - Developing code for Aerodynamic systems or small UAVs/UASs - Integrating hardware and software


Interview Required Yes
Min Pay Rate 75.00 USD
Shift 1st Shift
Max Bill Rate
OT Allowed Yes (#hours allowed: 10, Pre-Approval Reqd.:Yes)
Travel No
Non-Exempt

Rates
0-4 Yrs Pay Rate: 65.00 USD
5-8 Yrs Pay Rate: 70.00 USD
9+ Yrs Pay Rate: 75.00 USD
 
Job Number: JE-0663
Job Location: Palmdale, CA
Rate: 65-75/hr DOE
Duration: 9 month contract
Input Date: 10/20/2017
Last Updated: 01/03/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr Electrical Engineer I – ability to obtain and hold a DoD secret security clearance TX AL AZ

Description:
Sr Electrical Engineer I – Clearance 7317193 - $75.00 HR

Senior Designer or Electrical Engineer with
understanding and wide application of technical theories, and concepts in digital design, with general
knowledge of other related disciplines. The Senior
Designer provides technical solutions to a wide range
of difficult problems. This position will function in a
multi-disciplined design team. The person will be the
Responsible Engineering Authority (REA) for
hardware design, fabrication, assembly, test, and
integration of a circuit card. Designs include
technology of processors, FPGAs, memory, and
industry interfaces, such as PCIe, Ethernet, I2C,
UART. Candidates can independently determine and
develop approach to solutions to contribute to the
completion of specific programs and projects.

Required Skills: U.S. Citizenship required • A minimum of 4 years’ experience in Digital Design • Proven ability to take a design concept from the block diagram or requirements level and develop a complete hardware design • Experience with PCB design tasks and proven ability to use tools to design (schematic capture), analyze and simulate designs prior to hardware execution. • Experience with embedded test techniques, design for test, design margin analysis and circuit design for production • A strong advocate for process improvement • A self-motivated and effective communicator • Experience in managing schedule and resources to meet assigned milestones • Ability to obtain and retain security clearance Desired Skills: • Experience using Mentor Graphics Design Creation tools: DxDesigner, xDX Designer VX, and Constraint Editor System (CES) • Experience using Mentor Graphics PCB electronic circuit design software: HyperLynx signal integrity, power integrity, and analog simulation, Xpedition Enterprise (xPCB) • Six Sigma specialist • Existing Secret security clearance Required Education (including Major): Bachelor’s Degree in Electrical Engineering (MS preferred) or similar degree and meets the experience requirements This position requires the ability to obtain and hold a DoD secret security clearance.
 
Job Number: MB-7317193
Job Location: McKinney, Huntsville, Tucson, TX, AL, AZ
Rate: 75/hr max
Duration: 18 month contract
Input Date: 12/01/2017
Last Updated: 01/03/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr Electrical Engineer II - Clearance / ability to obtain a Secret security Clearance AZ TX AL

Description:
Sr Electrical Engineer II – Clearance 7317190

Senior Designer or Electrical Engineer to contribute
to the design, analysis, simulation, test, and
integration of digital electronic modules and/or CCAs
for Missile applications. The Senior Electrical
Engineer must be experienced in all aspects of circuit
card design from concept through delivery to higher
level assemblies as evidenced by multiple successful
design completions (including hardware designs with
processors, FPGAs, memory, and industry interfaces,such as PCIe, Ethernet, I2C, UART). This position
will function in multi-disciplined design teams across
multiple projects. This person will be the
Responsible Engineering Authority (REA) for
development of one or more complex modules, CCAs
or units and will be expected to apply rigorous and
systematic design processes to ensure total design
compliance. This position will interface with
Integrated Product Team Leads (IPTL) and stake
holders to ensure program objectives are achieved.
The position requires frequent use and application of
technical standards, principles, concepts and
techniques. Candidates will be expected to provide
solutions to a variety of technical problems of
moderate scope and complexity, working under
general supervision. Successful candidate should
expect to be immersed in a fast-paced, team-based,
and challenging technical environment where an
individual with talent and initiative can stand out and thrive.

Required Skills: • U.S Citizenship required The ability to obtain and retain a Secret security Clearance • Minimum of 6 years Engineering design experience, with at least 2 years in a senior position • A self-motivated and effective communicator • Ability to prioritize work of others and handle multiple tasks at a time • Experience in the development and design of electronic circuit designs, multi-assembly system/unit design, processor designs a plus • Proven ability to take a design concept from the block diagram or requirements level and develop a complete hardware design, and verifying via test and integration • Experience with PCB design tasks and proven ability to use tools to design (schematic capture), analyze and simulate designs prior to hardware execution. • Experience with embedded test techniques, design for test, design margin analysis and design for production • A strong advocate for process improvement • Experience in managing schedule and resources to meet assigned milestones • Capable of functioning in multi-disciplined design teams across multiple projects Desired Skills: • Experience using Mentor Graphics Design Creation tools: DxDesigner, xDX Designer VX, and Constraint Editor System (CES) • Experience using Mentor Graphics PCB electronic circuit design software: HyperLynx signal integrity, power integrity, and analog simulation, Xpedition Enterprise (xPCB) • Experience with intellectual property generation (patents & publications) • Team and project leadership skills • Knowledge of software and/or FPGA code development • Experience leading a program transition from development to production • Demonstrated ability to manage technical and schedule risks and to identify cost reduction opportunities • Knowledgeable in cost/schedule development and management Required Education (including Major): Bachelor’s Degree in Electrical Engineering (MS preferred) or similar degree and meets the experience
 
Job Number: MB-7317190
Job Location: McKinney, Huntsville, Tucson, TX, AL, AZ
Rate: open rate
Duration: 18 month contract
Input Date: 01/03/2018
Last Updated: 01/03/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Staff Systems Electrical Engineer - No C2C

Description:
Johnson Service Group (JSG) is searching for a Staff Systems Electrical Engineer, capable of leading the design and development of main engine controls, including Full Authority Digital Engine (or electronics) Control (FADEC). This critical role will support the digital engine control design and development for Commercial and Defense aircraft turbine engines.

The Staff Systems Electrical Engineer is responsible for support of system development, leadership support, collaboration and process improvement, including Product Lifecyle (PLC) Management.

Summary of Job Scopes:

8-10+ years of related electrical engineering experience, ideally with a background in electronics or software design, within the Aerospace and Defense industries.
Will lead System Requirements Definition and Partitioning and flow down from higher level system to LRU components.
Will derive the requirements from the analysis of the primary system and establishes acceptance criteria for these requirements.
Able to resolve and negotiate requirement conflicts in order to establish a complete and consistent requirement set for the system.
Responsible for system verification and validation, including test plan writing.
Ability to drive System Architecture Definition and Design implementation, as well as System/Component Interface Management.
Motion Control Simulation/Analysis experience, including MATLAB SIMULINK or similar tools.
Familiarity with DOORS or similar Requirements management and Traceability tools.
Familiarity with Aerospace industry and the product development processes, including ARP4754, DO-178, DO-254, etc.

Education:

Bachelor's Degree in Electrical Engineering or a similar technical discipline
Master's Degree in Electrical Engineering or a similar technical discipline is a plus
Type of employment: Full time salaried position

Location: Chicago, IL
 
Job Number: 361925
Job Location: Chicago, IL
Rate: $125k/yr
Per Diem: no
Overtime: possible
Duration: Direct Hire
Start Date: asap
Input Date: 01/19/2018
Last Updated: 01/19/2018
Firm Name: JOHNSON SERVICE GROUP
Attention: Rich Martinsen
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Test Engineer - Level 3

Description:
Test Engineer - Level 3

Location: Dallas, TX
Pay Rate: DOE ($50/hr - $70/hr)
Duration: 14 month W2 contract
Shift: First, 9/80, OT
**MUST be a U.S. CITIZEN**
**MUST be ELIGIBLE to obtain a DoD SECRET CLEARANCE**

Description
-Analyze complex electronic devices and circuitry to design automated card level test equipment (ATE), establish hardware and software test requirements, design and document ATE, integrate ATE software and hardware, and demonstrate ATE work product completion.
-Must be interested in working with both hardware and software, must be able to complete tasks per established schedule, and must have strong writing and communication skills.

Skill/Experience/Education/MANDATORY:
-One of the following degrees: BSEE or BSEET or BSCE
-Agilent 3070 Series III Test Development experience: (4-5+ years' experience required)
-Boundary Scan programming: (4-5+ years' experience required)
-Fixture design: (4-5+ years' experience required)
-Microsoft Office applications: (1-3+ years' experience required)
-Strong writing and communication skills

Desired:
-Agilent device programming (Flash, EEPROM, CPLD): (1-3+ years' experience desired)
-JTAG Tech programming: (1-3+ years' experience desired)
-TestSight CAD translation: (1-3+ years' experience desired)
-CKT1175 programming: (1-3+ years' experience desired)
-Perl: (1-3+ years' experience desired)
 
Job Number: 8014
Job Location: Dallas, TX
Rate: 50-70
Per Diem: Split Possible
Overtime: Possible
Duration: 14 months
Start Date: ASAP
Input Date: 10/20/2017
Last Updated: 01/17/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Test Operations Manager -Direct Hire-

Description:
Job Description:

Johnson Service Group is looking for a Test Operations Manager.


Essential Functions and Responsibilities:

-Manages the daily operations and assignments of the Test Development, Production sustaining Test Engineering and support teams.
-Collaborates with Customer Focused Teams (CFTs) and Production Operations to ensure daily committed objectives are realized.
Teams include; Functional Test Development, Functional Test-Sustaining, In-Circuit Test (HP3070) Development, ICT Sustaining, Flying Probe (Takaya 9411, SPEA 4060) Development, Sustaining engineering, functional and ICT debug technicians.
-Supports Sales with new prospect engagements to understand product testing requirements as technical resource.
-Creates product test development project plans and timelines.
-Supports all related activities including direct engagement with customers engineering staff and Corporate Global Engineering resources to ensure project objective are met.
-Engages with third party supporting resources and suppliers as necessary.
-Collaborates closely with staff on product test platform issues, trending product failures, etc. to define resolution, escalates as necessary.
-Makes recommendations for continuous improvement opportunities.
-Manages the Department’s equipment assets.
-Defines what equipment is or may be required to support current and future customer’s product testing requirements
-Creates equipment acquisition justifications and requests
-Collaborates with Quality Engineering for process improvement, supports internal and external corrective actions
-Supports and drives Department 5-S and other organizational opportunities.
-Provides daily statistics on work in process and resource planning in support of Production requirements.
-Follows all health and safety policies at all times
-Possesses excellent communication, listening and interpersonal skills with the ability to interact with multi-cultural backgrounds and build trusting relationships in order to gain support, achieve results within the organization.
-Possesses a high degree of integrity in the handling of confidential and sensitive information
-Must be motivated and self-directed, highly dependable with excellent multi-tasking and time management skills.
-Supportive of Lean, Six Sigma and related continuous improvement initiatives of critical operational metrics across key functions.
-Maintaining courteous, professional and effective working relationships with employees at all levels of the organization

Qualifications Required / Job Specifications:

-Technically qualified; 8+ years’ experience as Sr.Test Engineer, experienced in a functional test development role preferred.
-Experience with “Open Source” development; LinuxOS, python scripting, VB and other scripting languages
-Experienced with Labview/Teststand preferred
-Experience with strategizing product test interfaces (hardware design.
-Experience in driving / supporting the development product test diagnostics in conjunction with test application development
-5+ years direct Management experience leading a team of development and sustaining production Test Engineers as well as managing a staff of supporting technicians.
-Highly experienced in creating product test strategy and project planning
-Experience performing in the EMS (contract manufacturing) industry or directly interacting with EMS providers highly preferred
-Experience as a project manager directing and overseeing and driving on time delivery of supporting material with external suppliers.
-Prior experience performing as both supplier and customer is extremely helpful.
-Experience interacting with internal and/or external product designers, system architects, etc. to extract details. necessary to develop and propose the test strategy and methods; both hardware and software.
-Experience performing in a dynamic production test environment.
-Wide ranging exposure to products of different technologies; WiFi, data center, data storage, industrial electronics (semiconductor test and performance characterization electronics, medical and automotive, etc).
-Highly skilled in the use of MS Office applications.
-Ability to present proposals, performance metrics, project status, etc. both to internal management as well as customer team
-May analyze existing or customer proposed test strategies for efficiency and cost-down opportunities.
-Negotiating skills are very helpful to achieve desired results

Mathematical Skills:

-Ability to apply advanced concepts of algebra, statistics and geometry

Physical Demands and Work Environment:

While performing the duties of the job, the employee is regularly required to sit, stand and or walk for extended periods of time; use hands and fingers to handle materials, PCBAs, etc.; reach with hands and arms; and talk and hear. The employee must occasionally lift and or move up to 30 pounds unassisted and have steady hands and dexterity. Specific vision abilities required by this position include close vision, peripheral vision, depth perception and focus adjustment.
 
Job Number: 362271
Job Location: Milpitas, CA
Rate: $125k
Per Diem: No
Overtime: No
Duration: Permanent
Start Date: ASAP
Input Date: 11/30/2017
Last Updated: 01/19/2018
Firm Name: JOHNSON SERVICE GROUP
Attention: Sidney Williams
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Transportation Analyst 2

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Transportation Analyst 2
(U.S. Citizenship Required*)
SeaTac, WA
2017-5115

Responsibilities:
• Assist in the selection of carriers and spot quotes.
• Interface with freight forwarders and carriers on standard shipments.
• Interface with internal compliance organizations to ensure compliance.
• Certify the shipment of dangerous goods.
• Assist in the investigation, preparation and submission of loss and damage claims to carriers.
• Work with others on the design of transportation plans to support internal organizations and external customers on traffic management issues.
• Job includes working with Suppliers, creating export documents, export filing to Customs and Border Protection via electronic interface.
• Understanding of US Export Compliance regulations.

Qualification:
• Successfully pass a credit check
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience: Bachelor's degree and typically 3 or more years’ related work experience, a Master’s degree and typically 1 or more years’ related work experience or an equivalent combination of education and experience.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!


TO APPLY, PLEASE VISIT OUR WEBSITE: https://careers-moseleytechnical.icims.com/jobs/5115/transportation-analyst-2/job?mode=view
 
Job Number: 2017-5115
Job Location: SeaTac, WA
Duration: 6 Months
Input Date: 12/15/2017
Last Updated: 12/29/2017
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Katie Newman
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

UG Designer

Description:
With electronic packaging
 
Job Location: MI/WI/TX
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: jgleason@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Wire Harness Installation Engineer

Description:
Wire Design & Install Engineer

Location: Tukwila, WA
Duration: 12 Months

Job Description:
Develops and maintains cable/wire harness detail and assembly designs. Analyzes results and performs design reviews. Develops and maintains electrical product detail, assembly and installation designs (e.g., equipment racks, power panels, cable routing and geometry, antennas). Provides engineering design disposition on discrepancies (e.g., rejection tags, production action requests, shop revision requests). Documents processes, specifications and procedures that support the design and manufacture of electrical commodities. Develops basic statements of work. Participates in technical review of supplier capabilities to facilitate source selection. Analyzes functional and physical input to assure development of complete integrated design. Works under general direction.

Skill Code:
679-Electrical/Electronic Installa

Education / Experience:
Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification
 
Job Number: 17-21027
Job Location: Tukwila, WA
Per Diem: Yes
Duration: 12 Months
Input Date: 12/21/2017
Firm Name: ICONMA LLC
Attention: Robin
Address: 1201 PACIFIC AVE STE 600
City, State: TACOMA, WA 98402
Phone: 253/213-2012
Website: www.iconma.com

Back to Advanced Job Search