Job Search Results

603 listings were found that matched your search words: Keywords: Electrical ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2018/12/15 Saturday 12:19PM Pacific Time by ContractJobHunter. )

Listings 1 - 603

Go To My Job Tracker

Expand all descriptions

1st Shift

Description:
Perform maintenance in support of manufacturing facility on a variety of equipment throughout facility including machinery repairs, preventative maintenance, machine relocation, fabrication, welding, electrical repair and installation, plumbing (air, hydraulic, water) with use of a variety of equipment.  Responsible for monitoring hazardous waste for removal, maintenance of chemical storage area and clean up of chemical spills as required.  Nontoxic or non-hazardous.  Mainly Soap and/or grease
Will be operating a crane or fork lift.
 
Responsibilities:
Provide maintenance support in all areas of manufacturing facility including but not limited to machinery repairs, preventative maintenance, machine relocation, fabrication, welding, electrical repair and installation, plumbing (air, hydraulic, water) with use of a variety of equipment such as hand tools, welding equipment, fork lifts, and precision measuring equipment.  Maintain and develop preventative maintenance program for production related equipment.  Required to perform work in compliance to all safety and EHS policies and procedures. 
 
Qualifications:
  • Knowledge of EHS procedures and policies
  • Knowledge and safe use of production related equipment
  • Working knowledge and use of welding, electrical, and plumbing equipment including repair and maintenance of machinery
  • Millwright Skills and familiar with Electrical and/or Hydraulic
  • Able to interpret OEM handbooks and/or plant diagrams
  • Understanding of reading building plans and electrical schematics
  • Ability to use trouble-shooting and precision measuring equipment
  • Where applicable, trained in maintenance processes such as but not limited to welding, plumbing, electrical and mechanical troubleshooting
  • Vocational or technical training in a maintenance related discipline, strongly preferred

 
Training requirements:

  • Demonstrated ability to comply to maintenance safety procedures such as lock-out tags, etc.
  • Demonstrate ability to safely complete job tasks utilizing manual equipment as well as use of gauges needed for repair fabrication
  • Demonstrate ability to perform preventative maintenance, and repair of facilities equipment
  • Where applicable, complete safety and maintenance training and or certification

 
 
 
 
 

 
Job Number: 1610061453
Job Location: Las Vegas, NV
Duration: 12 months
Input Date: 12/19/2016
Last Updated: 12/14/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Eric Khassanov
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002G2BqAAK&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2231 - ELECTRICAL HARNESS DESIGNER - resume - word doc only

Description:
Produce and deliver Harness Data Reports based on Digital Mock-up and Mentor Graphics.

Integrate the design of the wire harnesses.

Incorporate changes (RFC, PCR) on the harness data reports.

Contribute to the team effort by meeting the team%u2019s objectives for productivity and quality.

Contribute to other relevant tasks needed to support the team%u2019s objectives.

Have a University degree in aircraft avionics or electrical engineering or equivalent work experience in wiring integration.

Have experience with harness manufacturing or methods.

Have a minimum of 5 years of relevant working experience in aerospace.

Have wiring design, wiring installation and/or wiring troubleshooting experience.

Mentor Graphics Harness XC tool knowledge is the primary requirement.

Also have experience with Catia V5.

Have a strong sense of responsibility and have good organization skills.

Must have excellent communication skills including the ability to read/write in English.

Are comfortable working with MS office suite.

Are familiar with BM%u2019s, RAE documents and BAPS related to harnesses.

Communicate clearly and openly with your team.

Embrace changes and new ideas.

Are persistent to reach your goals.

Seek out and accept feedback.
 
Job Number: 2231
Job Location: Montreal, Canada
Rate: 61.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 07/27/2017
Last Updated: 01/26/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2304 - AVIONICS SYSTEMS ENGINEER - cv. word doc only

Description:
Support of Compliance to Certification Authority; author Certification Plans

Provide specialist advice relating to test methods and procedures

Review testing readiness and conformities of assigned systems

Review qualification, ground and flight test data of assigned systems

Review flight test reports containing data demonstrating proper system operation as required by Certification Authorities Regulations

Review and Sign flight release documentation (including safety of flight judgments)

Review system performance analysis to ensure proper compliance to regulations

Coordinate with other Certification Authority Delegates for integrated functions (ie, Human Factor, Pilots, et al)

May provide technical leadership to a small engineering team for dedicated technical investigation / test.

Bachelor's degree in Avionics / Electrical/ Aerospace Engineering, plus 12-15 years' experience in Avionics systems design and certification.

Able to obtain a Certification Authority Delegation for assigned systems

Working knowledge of Rockwell Collins Proline 21 or Fusion Avionics Systems would be advantageous.

Must have excellent communication skills in English - both written and oral and be PC literate.

Experience in flight-testing of civil aircraft; and knowledge of TCCA, FAA, and EASA certification requirements (ie, FAA CFR Part 25) required.

Mirabel is just outside Montreal, Canada.
 
Job Number: 2304
Job Location: Montreal/Mirabel, Canada
Rate: $63.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 12/03/2017
Last Updated: 04/11/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer / no clearance / Flight Control and Vehicle Management System skills a requirement CA

Description:
Requirement #AERO-REQ-0710
Work Location Palmdale, CA (1011 Lockheed Way)
Work Week 9/80

Needed Date 11/28/2017
End Date 11/09/2018
Number of Resources 1
No Clearance

Flight Control and Vehicle Management System skills a requirement

Title: Aeronautical Engineer

Description

Candidate will contribute to aircraft FC&VMS (Flight Controls & Vehicle Management System) design, configuration development, feasibility and risk analyses, and technology maturation plans, define, develop, analyze and coordinate FC&VMS requirements with other flight sciences disciplines including ground and flight test, reliability & maintainability, system safety, and other personnel. Develop models and simulations as needed for design and analysis. Perform trade studies and define preliminary requirements for VMS architecture components. Design mechanical and electrical/electronic interfaces to support system integration and test. Define high level software requirements and flow down requirements to procurement specifications. Tasks may also include management of selected vendors, including verification of requirements. The candidate will support system/software verification and validation effort and customer reviews during all phases of system development. The candidate will develop and support integration and system check out (SCO) procedures on flight test article and support pre-flight and post-flight analysis and reviews

Skill/Experience/Education

Mandatory:

Hardware and software integration experience Familiarity with Flight Controls and Vehicle Management Systems Demonstrated ability coordinating with systems engineering, hardware designers and subsystems
Desired:

B.S. Degree or above in an Engineering Discipline
Several years of hardware & laboratory experience MATLAB, Simulink experience


Interview Required Yes
OT Allowed Yes (OT Limitation: No)
Travel No
Non-Exempt
Rate Type Per Hour

Rates
0-4 Yrs Pay Rate: 65.00 USD
5-8 Yrs Pay Rate: 70.00 USD
9+ Yrs Pay Rate: 75.00 USD
 
Job Number: JE-0710
Job Location: Palmdale, CA
Rate: 65-75/hr DOE
Duration: 12 month contract
Input Date: 01/16/2018
Last Updated: 02/06/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Applications Engineer Vice Installation

Description:
UNIQUE SKILLS
Candidate must have In depth knowledge of electrical harness installation and design guidance documentation (AC 43.13B, SAE AS50881, AC1701-1); In-depth knowledge of FAR 25 sub part H (EWIS) design requirements; Knowledge of EWIS component qualification requirements and documentation (EIA 364, MIL-DTL-38999, MIL-DTL-50151); Extensive knowledge of EWIS component selection criteria; experience with Mentor Graphics Capital Harness System (CHS) preferred Education/Experience: Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs. in the specific technical discipline or 10 yrs. broad engineering experience in several technical disciplines with Bachelors, or 3 yrs. in the specific technical discipline with Masters, or 1 yr. in the specific technical discipline with PhD. Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the production of Client products and services.

PRINCIPAL DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

ADDITIONAL FUNCTIONS
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

OTHER REQUIREMENTS
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 17-785-100301
Job Location: Southeast
Rate: $58.00 to $63.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 01/29/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

Aviation Mechanics - Clearance

Description:
Seeking Experienced Aviation Mechanics for a contract opportunity in San Antonio, Texas!

Work to be performed on a VIP aircraft, 747 platform and active Top Secret Clearance Required.
Several Openings For:
  • General Mechanic
  • Electrical
  • Structures
  • Avionics Tech
  • Quality Inspection
  • Supply Chain Specialist


Great Opportunity for Ex-military/Exiting Military/ and Veterans
Previous military experience a plus!


 
Experience performing routine maintenance, modifications, and rework on VIP - 747 aircraft.
Required- Minimum of 5 years' experience working on 747 platform.
Tools: no tools required
Location: San Antonio, Texas

***Current Security Top Secret Clearance required
US Citizenship Required: Clearance requirements will be used during resume screening. Individuals must hold a current Clearance or Equivalent Clearance/ investigation type to be considered for this position, clearance level must be noted on the resume. Must follow submittal procedures below for consideration. No phone calls please, only candidates that provide resumes with the job ID number will be contacted and considered for the opportunity.

**submittal must reference Job ID number 1710063637

Camille Zunker- czunker@pdstech.com
 
Job Number: 1710063637
Job Location: San Antonio, TX
Duration: 12 months
Input Date: 02/27/2017
Last Updated: 12/14/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Camille Zunker
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002GBZ0AAO&URLSource=cjhunter

Avionics Electrical Engineers

Description:
Jets experience a plus
 
Job Location: Midwest
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: jmac@advancedtechno.com
Website: www.advancedtechno.com

Avionics Electrical Engineers

Description:
Jets experience a plus
 
Job Location: Southeast
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: jmac@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer III / Instrumentation / CREO / MODELCHECK / Harness cable electro-mechanical packaging CA

Description:
7356312
Job Title: Avionics Engineer III / Instrumentation

Number of Positions: 1

Remaining Positions: 1

Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **




** Candidates should have experience with Creo Parametric and Creo Cabling. Experience with Creo Schematics; Windchill; and Modelcheck preferred **



-Support Electro-Mechanical Packaging of complex electrical/electronic assemblies.

-Extensive knowledge of electronic packaging design for harsh environments, with Aerospace and/or military experience.

-Experience is design of cables and harnesses for applications for Aerospace products.

-Proficiency in use of Creo PDM/Link and Windchill.

-Additional proficiency with GD&T and tolerance analysis.



Skills:
Prior experience and detailed knowledge of Windchill PDMLink 10.1 or greater
Previous experience with MODELCHECK preferred
Proficiency with Creo Parametric 2.0 (or greater) with extensive knowledge of:
Large Assembly Management, Simplified Representations, Combination States
Top Down Design with Skeletons including Publish Geometry, Copy Geometry, and Shrinkwraps
Mechanism Design
Advanced part modeling techniques including the use of relations, analysis features, and flexible components
Experience with Creo Cabling including
Utilizing logical reference data (automated routing)
Harness flattening using Creo Harness-MFG extension
Working knowledge of Creo Schematics 2.0 desired including:
Block Diagram to Wiring Diagram Schematic Development (aka “BID to WID”)
Diagram creation utilizing a Central Catalog

Education:
BSME with 10 years of experience or 15 + years of equivalent experience

Skills:
Required

AVIONICS INSTRUMENTATION CREO WINDCHILL GEOMETRIC DIMENSIONING GEOMETRIC TOLERANCING

State/Province: California
City/Town: Canoga Park

Start Date: 11/06/2017 Hours Per Week: 40.00
Est. End Date: 05/06/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7356312
Job Location: Canoga Park, CA
Rate: 49/hr max
Duration: 6 month contract
Input Date: 11/01/2017
Last Updated: 12/19/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer III/Instrumentation

Description:
Avionics Engineer III / Instrumentation
Canoga Park, CA
Rate: $45-$49


Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **




** Candidates should have experience with Creo Parametric and Creo Cabling. Experience with Creo Schematics; Windchill; and Modelcheck preferred **



-Support Electro-Mechanical Packaging of complex electrical/electronic assemblies.

-Extensive knowledge of electronic packaging design for harsh environments, with Aerospace and/or military experience.

-Experience is design of cables and harnesses for applications for Aerospace products.

-Proficiency in use of Creo PDM/Link and Windchill.

-Additional proficiency with GD&T and tolerance analysis.



Skills: •Prior experience and detailed knowledge of Windchill PDMLink 10.1 or greater ◦Previous experience with MODELCHECK preferred

•Proficiency with Creo Parametric 2.0 (or greater) with extensive knowledge of: ◦Large Assembly Management, Simplified Representations, Combination States
◦Top Down Design with Skeletons including Publish Geometry, Copy Geometry, and Shrinkwraps
◦Mechanism Design
◦Advanced part modeling techniques including the use of relations, analysis features, and flexible components

•Experience with Creo Cabling including ◦Utilizing logical reference data (automated routing)
◦Harness flattening using Creo Harness-MFG extension

•Working knowledge of Creo Schematics 2.0 desired including: ◦Block Diagram to Wiring Diagram Schematic Development (aka “BID to WID”)
◦Diagram creation utilizing a Central Catalog


Education: •BSME with 10 years of experience or 15 + years of equivalent experience
 
Job Number: 8082
Job Location: Canoga Park, CA
Rate: $45-$49
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 10/13/2017
Last Updated: 12/18/2017
Firm Name: INCONEN CORPORATION
Attention: Cathy O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics/Electrical Contractor (Custom Engineering)

Description:
Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of products and services

Unique Skills:
• Must be proficient at creating design and compliance data to support after-market installations on all company models.
• Must understand FAA/ODA/Industry requirements associated with aircraft modifications.

Education and Experience Requirements:
• Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Essential Functions:
• Contributes to planning, developing and coordinating of important engineering projects
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
• Acts as liaison with representatives outside of the assigned group/area
• Actively works to improve daily processes and ensures all work meets customer requirements
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
 
Job Number: 24-213
Job Location: Savannah, GA
Rate: $50 - $55
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 05/03/2018
Last Updated: 08/06/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics/Electrical Contractor (Custom Engineering) TS1

Description:
Avionics/Electrical Contractor (Custom Engineering) TS1

Location: Savannah, GA
Pay Rate: $58/hr - $63/hr
Duration: Long Term W2 Contract
Shift: First

Unique Skills:
Must be proficient at creating design and compliance data to support after market installations on all Company aircraft models. Must understand FAA/ODA/Industry requirements associated with aircraft modifications.

Education and Experience Requirements:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

Principal Duties and Responsibilities/Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 8220
Job Location: Savannah, GA
Rate: 58.00-63.00
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/27/2017
Last Updated: 02/19/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Cabin Safety Engineer V&V

Description:
Velocity’s client, an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM’s, is seeking multiple Cabin Safety Engineers. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.
Seeking contract engineers to join the team in Seattle with at least five years’ experience with cabin safety engineering, to include:
• Experience and knowledge of FDMS & Water Waste Interior Systems (OEM level preferred)
• Experience with requirements writing at aircraft/systems level
• Experience validating requirements (completeness and correctness) and developing verification matrix (plan and results)
• Familiar with requirements definition, traceability, validation and verification process.
• ARP4754A knowledge and experience
• Proficient at DOORS or similar requirement management tool.
Essential functions:
• System requirements verification and validation.
• Flight test and ground test specifications.
• Support flight test and ground test activities.
• Analyze test data and evaluate system operation.
• Prepare test reports.
Desired Qualifications:
• Experience with FAA Part 25 or Part 23 certification, flight and ground test activities.
• Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
• A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
• Ability to represent the client professionally and positively during client interactions and meetings.
• Bachelor degree in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
 
Job Location: Moses Lake, WA
Start Date: ASAP
Input Date: 12/28/2017
Last Updated: 01/23/2018
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Certification Engineer

Description:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of products and services

Unique Skills:
• Must be proficient in certification & compliance documentation creation. (For example Certification Plans, Ground Test Plans, Instructions for Continued Airworthiness, Airplane Flight Manual Supplements, etc.)
• Must a have at least 10 years of Avionics/Electrical Systems design/integration experience.

Education and Experience Requirements:
• Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required.
• 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Essential Functions:
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Is consulted extensively by associates and others as a recognized authority within the field
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
• Approach to problem solving balances technical product, cost and schedule
• Works without appreciable direction; work is reviewed from a long-range perspective for desired results
• Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.
 
Job Number: 24-210
Job Location: Savannah, GA
Rate: $50.00 - $55.00
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 10/25/2017
Last Updated: 12/08/2017
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Certification Engineer Custom Engineering

Description:
Certification Engineer Custom Engineering

Location: Savannah, GA
Pay Rate: $50/hr - $55/hr
Duration: Long Term W2 Contract
Shift: First

Unique Skills:
Must be proficient in certification & compliance documentation creation. (i.e. Certification Plans, Ground Test Plans, Instructions for Continued Airworthiness, Airplane Flight Manual Supplements, etc.) Must a have at least 10 years of Avionics/Electrical Systems design/integration experience.

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Company products and services

Principle Duties and Responsibilities/Essential Functions:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
Languages Required (in addition to English): English
 
Job Number: 8138
Job Location: Savannah, GA
Rate: 50-55
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/27/2017
Last Updated: 12/11/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Chemical Engineer

Description:
Chemical Engineer
Location: Tulsa, OK
Duration: 12+ months
Rate: Open, DOE
Chemical Engineer Summary Statement:
Applies extensive knowledge of principles, theories and concepts related to Chemical Engineering.
Chemical Engineer Essential Functions and Key Responsibilities:
Develops solutions to a variety of problems of moderate scope and complexity.
Solves unusual problems that require moderate ingenuity and innovation related to chemical engineering, chemical formulations and manufacturing processes. Work is accomplished under general management direction. Applies extensive knowledge of chemistry and chemical engineering to design and develop transparency related aircraft products for military, executive, general aviation, or special purpose applications on operational aircraft. Researches and develops new and improved chemical manufacturing processes. Designs chemical plant equipment and devises processes for manufacturing. Determines most effective arrangement of operations such as mixing, conditioning, application, and testing of related polymer products. Develops, implements, and maintains chemical processes;calculates and organizes all data for complex process flow sheets including instrumentation and control considerations; models processes and units operations. Confers with management to ensure proper sequence of operation and prepares specifications and operating instructions for processing equipment. Services, troubleshoots, and solves engineering problems with processes or equipment already in operation. Ensures processes and procedures are in compliance with regulations.
Conducts tests and measurements throughout stages of production to determine control over such variables as temperature, density, pressure and viscosity. May function as Project Manager on large projects or significant portions of very large projects. Provides technical leadership and oversight to the assigned engineering staff. May represent the Company to current or prospective customers or vendors on technical matters related to the job assignment or technical specialty.
Chemical Engineer Ancillary Job Functions and Responsibilities:
Perform other duties as required. These duties may include assignments in job classifications other than the primary assignment.
Chemical Engineer Job Qualifications:
Formal Education, Training, Professional Certification and
Chemical Engineer Work Experience:
Experience may be substituted for the formal education and training requirements in this section at the discretion of management. Technical Bachelor level degree in Engineering or the sciences or equivalent and six(6) years related experience and /or training; or equivalent combination of education and experience.
Level of Supervision Required:
Works under general direction. Receives guidance as to results expected and to resolve complex problems. Exercises latitude in determining activities and approaches within moderate to wide parameters. Standard Job Requirements:
•Must be able to arrive at work on time, work on-site, and attend regularly.
•Must be able to read and write technically in the English language, perform appropriate mathematical calculations and learn to interpret and comprehend company policies, procedures, safety instructions, and other like documents used in an aerospace manufacturing environment.
•Competent in the use of standard software applications such as Microsoft Word and Excel and operate standard office equipment.
•Make telephone and direct personal contact with internal and external personnel and make formal presentations
Chemical Engineer
.•May perform work of lesser skilled employees.
Special Job Requirements:
Experience and working knowledge of the following:
•Polymerization and casting of liquid methyl methacrylatemonomer
•Catalysts and cross-linking agents
•Filtration of liquid monomers
•Mechanical properties testing of polymers
•Adhesion promoters and surface primers
•Polymer coating so Polysiloxane and other protective coating so Electrically-conductive coating so Optical coatings for projection screens. Special Training:
•Safety training applicable to the job and the general work area.
Physical Requirements:
While performing the duties of this job, the Stakeholder is regularly required to sit; use hands to finger, handle, or feel; and talk and hear. The Stakeholder frequently is required to move from one place to another and reach with hands and arms. The Stakeholder must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, and ability to adjust focus. Travel between facilities. Must be able to work in excess of eight (8) hours per day and five (5) days per week, if required. Must be able to ascend and descend stairs. Work Environment :Must be able to tolerate exposure to dust, fumes, noise, temperature and other elements in the shop area, if required. The noise level in the work environment is usually moderate.
Mental Requirements:
Able to work as a team member, highly organized, work well under stress and handle multiple priorities. Must possess interpersonal and communication skills to interact with other people inside and outside the company.
The Structures Company, LLC is an AA/EOE.
 
Job Location: Tulsa, OK
Rate: "open"
Per Diem: yes
Overtime: "possible"
Duration: 12+ month
Start Date: asap
Input Date: 12/04/2017
Firm Name: STRUCTURES COMPANY LLC
Attention: Mark Sharp
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Circuit Card Assembly Specialist 2017-4708

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Circuit Card Assembly Specialist
(U.S. Citizenship Required*)
Must be able to work any shift
Huntsville, AL
2017-4708


Responsibilities:
• Performs all Circuit Card production assembly operations on electronic/electrical assemblies and subassemblies as an individual or as a member of a cross-functional, high performance work team.
• Performs simple rework and modification to circuit card parts and assemblies per requirements.
• Provides maintenance on machines and tooling and machine set up tasks to prepare machines for production activity following the machine inspection checklists.
• Documents results in accordance with applicable procedures.
• Collects and inputs data for statistical process control analysis.
• Perform CCA work using detail work instructions & other released planning documentation and a variety of other supporting technical documentation as required including but not limited to: CCA technical drawings, 2D & 3D models, schematics, circuit/wiring diagrams, process and equipment specifications, photographs, illustrations, and sketches.
• Perform all elements of CCA assembly, integration from detail fabrication to buildup of circuit card assemblies.
• Perform assigned work using any electrical and CCA related electronic test instrument, test equipment, measurement tool, required to trouble shoot at the CCA component level.
• Document CCA non-conformances down to component level. Perform, as required, approved CCA rework, modification, repairs and incorporation of changes per CCA technical documentation and formal direction to electrical, electronic and mechanical systems.
• Assist in defining, implementing, completing, and monitoring the execution of the work scope.
• Make recommendations for refinement to CCA equipment and integration processes by conducting studies and evaluations that result in product and process improvements.
• Analyze CCA product, processes, test data, and rejection history to identify root cause for problems and assist with developing corrective action.

Qualification:
• Basic Manufacturing Skills
• Basic Electricity
• Circuit Card Assembly (CCA) experience
• J-standard soldering certified
• Space addendum certified

*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
Work related skills equivalent to 3 years of circuit card related technical experience or a 2-year degree in electronics, mechanical or other technical discipline (or a minimum successful completion of all electronic courses contained with a 2-year electronics technical degree curriculum).

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!



TO APPLY, PLEASE VISIT OUR WEBSITE:
 
Job Number: 2017-4708
Job Location: Huntsville, AL
Duration: 6 Months
Input Date: 12/04/2017
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: https://careers-moseleytechnical.icims.com/jobs/4708/circuit-card-assembly-specialist/job?mode=view
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Completions Electrical Design Engineer

Description:
• Experience with Aircraft Cabin Interiors and Systems to include but not limited to: Cabin Management System, Cabin Entertainment System, Cabin Lighting, Cabin Switch Controls, Telephone System, Satellite communications, Water System, Waste System, EWIS, Cabin interior monuments and Seats
• Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Essential Functions:
• Contributes to planning, developing and coordinating of important engineering projects
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
• Acts as liaison with representatives outside of the assigned group/area.
 
Job Number: 24-183
Job Location: Savannah, GA
Rate: $58 - $63
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 09/20/2017
Last Updated: 02/06/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Checker

Description:
1. Review 3D engineering data for conformance to requirements as directed.
2. Check parts for fit, form and function to the extent that information is available.
3. Must have experience in Product Lifecycle Management (PLM) processes and tools, checking CATIA v5 , SmarTeam, as well as other CAD datasets, in accordance to requirements as directed.

Checkers are responsible for determining the acceptability of data in the following areas:
1. Accuracy and completeness of engineering product definition data, including CAD and PDM data.
2. Proper application and compliance with all Engineering and customer drawing requirements.
3. Use and understanding of GD & T a must.
4. Dimensioning and tolerancing including familiarity with ASME Y14.5.
5. Application of best drafting and design practices and procedures.
6. Applies extensive and diversified knowledge of industry fabrication practices for aircraft parts.
7. Advise Design personnel regarding company drawing and design practices and procedures.
8. Maintain a current and up-to-date knowledge of developments in the structures/systems design disciplines drawing/data requirements, as well as all interrelated disciplines of design build teams.
9. Assist in the research and development of Product Data Management (PDM)/Computer Aided Design (CAD) applications and methodologies for Engineering and when necessary, other departments.
10. Actively works to improve daily processes and ensure that all Data Integrity work and CAD and PDM solutions meet customer requirements.
11. Knowledge of company parts list & PdocM, a plus.
12. Knowledge of CHS, EWIS, Electrical harness Design a plus but not required.

Essential Duties and Responsibilities
1. Checks designs of complex mechanical aircraft interior furnishing, structures, and/or systems.
2. Ensures designs meet customer criteria, quality standards and FAA requirements.
3. Adheres to budget and project schedules.
4. Provides design guidance and feedback to other engineering personnel.
5. Other duties as assigned.
6. Knowledge of industry design and documentation standards.
7. Experience with mechanical assemblies and manufacturing technique design.
8. Ability to work independently and cross-functionally.
9. Experience in communicating with employees/teams in productive and efficient manner. • Strong communication and problem-solving skills.
10. Knowledge of Excel, Share Point software, Microsoft Office a plus

Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 5 ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.
 
Job Number: 24-191
Job Location: Savannah, GA
Rate: $50.00 - $55.00
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 09/25/2017
Last Updated: 02/06/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer

Description:
Design Engineer

Independence, OH
1 Year Contract
$50.00-60.00/Hr

Summary: Reporting to the Design Lead, the successful candidate will be responsible for supporting detail design and drawing release in support of initial production. Model Based Definition (MBD) drawings shall be compatible with UTAS Landing Systems design methodologies, customer and industry/regulatory requirements and standard practices. The successful candidate will conduct trade studies, generate layouts, perform tolerance stack-ups, and detailed part design and formal drawing release.

Required Qualifications:
• BS in Mechanical or Aerospace Engineering with 8+ years of design experience with a background in mechanisms and hydraulics in aerospace field with work experience with electrical and hydraulic systems routings
• Minimum of 8 years of experience within the Aerospace industry; must include extensive experience in New Product Development of transport and / or military type aircraft components and assemblies . Knowledge of industry standard practices for systems routings. Understanding of requirements management and verification. Understanding of decomposition of system requirements and development of sub-system requirements. Understanding of qualification requirements electrical and hydraulic equipment. CATIA V5 - model based definition (FTA), kinematics, functional tolerance and annotation and drafting / interoperability. Working knowledge of Engineering PDM systems. In-depth knowledge of MS programs (Word, Excel, Project, PPT). Strong communication skills capable of engaging and working directly with suppliers. US citizen, permanent resident alien or able to review all export-controlled technical information. Experience with GD&T (ASME Y14.5) and familiar with ASME Y14.100 and Y14.41 Experience with Matrix One and SmarTeam PDM systems Working knowledge of materials and surface treatments Proficient with MS Word, Excel, and PPT
• Demonstrated ability to utilize Catia V5 with strong emphasis on functional tolerance and annotation module
• Strong interpersonal skills with demonstrated ability to maintain good working relationships with internal and external customers
• Successful candidates must meet all requirements under ITAR & CCGP
• Possess UTAS-LS Enterprise Values including Ethical Behavior, Customer Focused Improvement, Accountability & Teamwork and Openness & Trust
 
Job Number: 8266
Job Location: Indendence, OH
Rate: 50.00-60.00/Hr
Per Diem: No
Overtime: Possible
Duration: 1 Year
Start Date: ASAP
Input Date: 11/15/2017
Last Updated: 02/05/2018
Firm Name: INCONEN CORPORATION
Attention: Brad
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer II

Description:
Position Summary: This position will work with the engineering team and will ensure the successful integration of each design element with the product as a whole. This individual will work both independently as well as part of the larger engineering team. Tasks will include the development of aircraft structural layouts and the design of individual components, assemblies, and installations. Engineering materials will include metals, nonmetals, and composite structural materials. Tasking may also include design and integration of aircraft mechanical systems, hydraulic systems, electrical systems, environmental control systems and a variety of other equipment and systems as needed. Specific duties and responsibilities include but are not limited to the following:

Essential Duties and Responsibilities:

The Design Engineer II will work with minimal intervention and must rely on experience and judgment to plan and accomplish goals while performing a variety of complex tasks in the following areas:

Applies standard engineering practices and techniques, including innovative methodology, to provide effective solutions to problems involving a wide number of variables.

Able to ensure the selection and application of materials and processes are appropriate to each design element with the ability to generate and/or revise specifications when necessary.

Compose compliance matrix to meet customer specification requirements.

In-depth knowledge of standard concepts, practices, and procedures within a specified engineering field.

Proficiency utilizing CATIA V5 engineering design software.

Works on problems of complex scope where analysis of situation or data requires a review of identifiable factors to determine appropriate action.

Ability to guide, mentor and advise other design engineering staff.

Creativity and latitude is expected.

Participate in a variety of process improvement projects.

Able to support design reviews with timely and relevant information and understanding.

Performs other duties as required.

Qualifications & Skills Requirements:

Requires a BSME, BSCE, BSAE, or a Bachelor’s degree in a related engineering field and a minimum of 5-9 years of experience in the Aerospace Industry or in a related field.
Requires proficiency using CATIA V5 and must be highly competent using MS Office products.

Physical Requirements: Individual must be able to sit for extended periods of time, working at a desk and/or attending meetings. May occasionally require employee to stand and/or walk and occasionally lift and/or move up to 10 pounds. Will need to be able to move throughout the office and talk/hear or otherwise communicate with other employees and management. Work will be performed in an office environment. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential duties of the job.

LMI is an equal employment opportunity employer. Consistent with applicable law, LMI provides access and opportunities to those with disabilities. This includes providing reasonable accommodation to individuals with disabilities and disabled veterans who seek to access the company’s online application system. If an applicant is unable to fully access the online application system, LMI will provide a reasonable accommodation. Applicants with disabilities may contact us at 636-916-2400 for assistance accessing the on-line application system. Callers should have a detailed description of the requested accommodation, their name and preferred method of contact ready for LMI‘s Human Resources Department. LMI will make every effort to respond within two (2) business days. This phone number is not for the general submission of application materials.

LMI is an E-Verify Employer.

LMI is an Equal Employment Opportunity/Affirmative Action/Disability/Veterans Employer


Click the link and follow instructions on HOW TO APPLY: LMI ENGINEERING JOB OPPORTUNITIES
 

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Support and Training - Instructor - Tech Spec II

Description:
UNIQUE SKILLS
CATIA v5 experienced with 5000+ hours. All Level 1 tools CATIA v5 (Part Design, Assembly, Drafting). Level 2 tools CATIA v5 Generative Surfacing, Free Style Shaping, Generative Sheetmetal, Generative Stress Analysis. Other tools: CATIA v5 Composites, Electrical EHI, Capitol Harness, Tubing experience a plus. Quantitative experience with Geometric Dimensioning and Tolerances a plus. Experience working within PDM systems such as Enovia, SmarTeam or NX/Teamcenter. Formal Classroom instruction experience required for CATIA and PDM.

EDUCATION AND EXPERIENCE REQUIREMENTS
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 10 yrs. in specific technical discipline or 15 yrs. broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs. for Masters and 4 yrs. for PhD in fields applicable to this job.

POSITION PURPOSE
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of client products and services

PRINCIPAL DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

ADDITIONAL FUNCTIONS
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
2. Performs other duties as assigned

OTHER REQUIREMENTS
1. Advanced degree in engineering, or related curriculum preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 17-758-82041
Job Location: Southeast
Rate: $60.00 to $62.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 02/28/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Support and Training Instructor

Description:
Design Support and Training - Instructor - Tech Spec II
Savannah, GA
Rate:$60-$62

Unique Skills:

CATIA v5 experienced with 5000+ hours. All Level 1 tools CATIA v5 (Part Design, Assembly, Drafting). Level 2 tools CATIA v5 Generative Surfacing, Free Style Shaping, Generative Sheetmetal, Generative Stress Analysis. Other tools: CATIA v5 Composites, Electrical EHI, Capitol Harness, Tubing experience a plus. Quantitative experience with Geometric Dimensioning and Tolerances a plus. Experience working within PDM systems such as Enovia, SmarTeam or NX/Teamcenter. Formal Classroom instruction experience required for CATIA and PDM.


Education and Experience Requirements:

Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:

Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

Principal Duties and Responsibilities:

Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 2. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 6620
Job Location: Savannah, GA
Rate: $60-$62
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 02/14/2017
Last Updated: 12/26/2017
Firm Name: INCONEN CORPORATION
Attention: Brad
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

EHI Engineers

Description:
Develop electrical wiring interconnect system (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wire harness assemblies, utilizing CATIA V5 Electrical and Sheet Metal Work Benches. Capable of interfacing with wiring diagrams, system, and EMI/EMC requirements. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements.
 
Job Location: Savannah, GA
Input Date: 07/07/2014
Firm Name: INCONEN CORPORATION
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: cathy@inconen.com
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical (EWIS) Engineer

Description:
Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Duration: Long Term Contract
Shift: 1st Shift


Unique Skills:
Develop electrical wiring interconnect system (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wire harness assemblies, utilizing CATIA V5 Electrical and Sheet Metal Work Benches. Capable of interfacing with wiring diagrams, systems, and EMI/EMC requirements. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements.
• Aerospace Experience is required
• Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required
• Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative
• Knowledge of Catia V5 Electrical is required

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

Principle Duties and Responsibilities:
Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7977
Job Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 03/21/2018
Last Updated: 06/11/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical (EWIS) Engineer-TS II

Description:
Electrical (EWIS) Engineer-TS II
Savannah, GA
Rate: $70-$77

Unique Skills:

Develop electrical wiring interconnect systems (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wiring diagrams, cable/wire harness assemblies, and rack/panel designs from electrical system schematics adhering to EWIS requirements. Select qualified electrical components such as connectors, backshells, and other parts. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements. • Aerospace Experience is required • Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required • Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative • Knowledge of Mentor Graphics Capital Harness Systems (CHS) is strongly desired


Education and Experience Requirements:

Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.


Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

Principle Duties and Responsibilities:

Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7976
Job Location: Savannah, GA
Rate: $70-$77
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 09/27/2017
Last Updated: 02/05/2018
Firm Name: INCONEN CORPORATION
Attention: Cathy O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Applications Engineering

Description:
UNIQUE SKILLS
Experience with Autocad required. Aerospace experience required. Experience or knowledge of electrical connectors, backshells, shielding, wiring and electrical connectivity is required. Be Familiar with CFR 14 Part 25 and AS50881. Candidate must be able to create wiring diagrams and schematics to include the selection of qualified electrical components such as connectors, backshells and other electrical parts. Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required. Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project.

JOB DESCRIPTION
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs. in the specific technical discipline or 10 yrs. broad engineering experience in several technical disciplines with Bachelors, or 3 yrs. in the specific technical discipline with Masters, or 1 yr. in the specific technical discipline with PhD. Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

PRINCIPAL DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

ADDITIONAL FUNCTIONS
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

OTHER REQUIREMENTS
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 17-736-93664
Job Location: Southeast
Rate: $58.00 to $63.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 03/21/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

Electrical Applications Engineers

Description:
Develop electrical wiring interconnect systems (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wiring diagrams, cable/wire harness assemblies, and rack/panel designs from electrical system schematics adhering to EWIS requirements. Select qualified electrical components such as connectors, backshells, and other parts. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements. Mentor L-Cable
 
Job Location: Savannah, GA
Input Date: 07/07/2014
Firm Name: INCONEN CORPORATION
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: cathy@inconen.com
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Controls Engineer

Description:
Manages low to medium complexity projects around the design and planning of layout for assembly and materials handling. Adaptation of low complexity machine or equipment design to factory and production conditions. Planning of sequence of operations and specification procedures for the fabrication of tools and equipment and other functions that affect product performance.
Manufacturing Controls Engineer Controls Engineer supports the overall manufacturing process through the ownership of PLC-related programming, troubleshooting, and support of PLC ladder logic. Responsible for the implementation of engineering changes and assisting various departments with the implementation of new tools and processes and required training.
- Support the plant in all aspects of the electrical maintenance troubleshooting using PLC and robot programming skills and a thorough understanding of the machines sequence of operations.
- Support the new equipment design reviews when required to review the status of the machine design and provide input in reference to the plant's specifications and good design practice.
- Manage the required electrical spare parts in the tool crib to ensure we can support any potential equipment failures on controls related items.
- Respond to any equipment downtime issues in plant and establish any required outside resources to assist in responding to these issues quickly.
- Train and develop the plant electricians to increase their ability to understand and troubleshoot controls related issues in the plant.
- Interface with the equipment supply base to have key resources at our suppliers to assist in equipment problem solving when required. Know who to call when.
- Manage large and small equipment improvement projects in the plant as a leader.
- Complete the capital equipment list for secondary equipment required for the program detailing the cycle time requirements.
- Write detailed engineering specifications for all the tooling and equipment required to purchase, include all relevant legislative requirements.
- Select the suppliers for capital equipment.
- Manage the capital budget for all the necessary equipment purchases.
- Ensure the completion dates for all equipment are met.
- Develop the preventative maintenance plan for the electrical section of new equipment for the production plant.
- Detail training needs for the plant for new equipment.
- Integrate with the launch teams to transfer the technology required for new programs successfully to the plant.

Education / Certifications - A Bachelor’s Degree in Electrical Engineering (or similar related degree). -

Experience / Qualifications:
- College Level Electrical Controls Technology Program
- Completion of 3 year program
- Minimum of three years as a Controls Engineer in a manufacturing facility
- Strong team work capabilities, operating in a multi-function environment to collectively improve operations and resolve related issues
- Experience in programming and troubleshooting problems with robots
- Experience in programming Allen Bradley, Siemens, and Omoron PLC’s
- Experience with assembly processes - Strong mechanical aptitude - Hands-on approach to engineering
 
Job Number: SC39937
Job Location: Florence, SC
Rate: $40.00
Per Diem: Possible
Overtime: Possible
Duration: 10 months
Input Date: 02/21/2018
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Bill Carriveau
Address: 7310 RITCHIE HWY STE 400
City, State: GLEN BURNIE, MD 21061-3092
800 Phone: 866/277-3343
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design and Cabin Management Eng Contractor TS II

Description:
UNIQUE SKILLS
Experience in engineering design of electrical systems that are part of and support aircraft interiors. This includes entertainment, power, lighting, cabin management and communication systems. Experience in creating wiring diagrams, schematics, wire harness drawings, electrical installation drawings and completing supporting analysis/calculations (e.g. voltage drop) AutoCAD, CATIA V5 and SmarTeam experience preferred Take ownership of deliverables produced & their quality. Coordination with the other Engineering disciplines, client and vendors. Experience with leadership/program management on a design program. Take lead role in the process of preparation of design deliverables to ensure appropriate checking & review of all documents / drawings before release.

EDUCATION AND EXPERIENCE REQUIREMENTS
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs. in specific technical discipline or 15 yrs. broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs. for Masters and 4 yrs. for PhD in fields applicable to this job.


POSITION PURPOSE
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of client products and services

PRINCIPLE DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

ADDITIONAL FUNCTIONS
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

OTHER REQUIREMENTS
1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 17-776-111061
Job Location: Southeast
Rate: $65.00 to $70.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 03/21/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design and Cabin Management Engineer

Description:
Electrical Design and Cabin Management Engineer

Location: Savannah, GA
Pay Rate: $65/hr - $70/hr
Duration: Long Term Contract
Shift: First

Unique Skills:
-Experience in engineering design of electrical systems that are part of and support aircraft interiors.
-This includes entertainment, power, lighting, cabin management and communication systems.
-Experience in creating wiring diagrams, schematics, wire harness drawings, electrical installation drawings and completing supporting analysis/calculations (e.g. voltage drop)
-AutoCAD, CATIA V5 and SmarTeam experience preferred.
-Take ownership of deliverables produced & their quality.
-Coordination with the other Engineering disciplines, client and vendors.
-Experience with leadership/program management on a design program.
-Take lead role in the process of preparation of design deliverables to ensure appropriate checking & review of all documents / drawings before release.

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Company products and services

Principle Duties and Responsibilities/Essential Functions:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.
Other Requirements:
1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 7764
Job Location: Savannah, GA
Rate: 65-70
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 08/15/2017
Last Updated: 02/14/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical EWIS Eng w/Catia V5 - TS II

Description:
UNIQUE SKILLS
Develop electrical wiring interconnect system (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wire harness assemblies, utilizing CATIA V5 Electrical and Sheet Metal Work Benches. Capable of interfacing with wiring diagrams, systems, and EMI/EMC requirements. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements. • Aerospace Experience is required • Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required • Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative • Knowledge of Catia V5 Electrical is required

EDUCATION AND EXPERIENCE REQUIREMENTS
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

POSITION PURPOSE
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of client products and services

PRINCIPLE DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

ADDITIONAL FUNCTIONS
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

OTHER REQUIREMENTS
1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 17-795-116742
Job Location: Southeast
Rate: $58.00 to $63.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 01/29/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical EWIS Engineer/ Electrical Apps

Description:
Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services

Unique Skills:
• Develop electrical wiring interconnect systems (EWIS), capable of resolving all technical issues relating to EWIS.
• Produce and maintain wiring diagrams, cable/wire harness assemblies, and rack/panel designs from electrical system schematics adhering to EWIS requirements.
• Select qualified electrical components such as connectors, backshells, and other parts.
• Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements
• Aerospace Experience is required
• Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required
• Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative
• Knowledge of Mentor Graphics Capital Harness Systems (CHS) is strongly desired

Education and Experience Requirements:
• Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required.
• 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.



Essential Functions:
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Is consulted extensively by associates and others as a recognized authority within the field
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
• Approach to problem solving balances technical product, cost and schedule
• Works without appreciable direction; work is reviewed from a long-range perspective for desired results
• Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
 
Job Number: 24-204
Job Location: Savannah, GA
Rate: $58 - $63
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 02/22/2018
Last Updated: 03/19/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical EWIS Eng wCatia V5 - TS II

Description:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

Unique Skills:
• EWIS knowledge. Wire Harness Routing. Wire Harness Installation. CATIA V5 Electrical Workbench.

Education and Experience Requirements:
• Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.


Principal Duties and Responsibilities:
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Is consulted extensively by associates and others as a recognized authority within the field
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
• Approach to problem solving balances technical product, cost and schedule
• Works without appreciable direction; work is reviewed from a long-range perspective for desired results
• Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
 
Job Number: 24-256
Job Location: Savannah, GA
Rate: $60 - $67
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 05/17/2018
Last Updated: 06/22/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Alabama, Tucson or Texas locations
FPGA and Digital design experience
Senior Designer or Electrical Engineer with understanding and wide application of technical theories, and concepts in digital design, with general knowledge of other related disciplines. The Senior Designer provides technical solutions to a wide range
of difficult problems. This position will function in a multi-disciplined design team. The person will be the Responsible Engineering Authority (REA) for hardware design, fabrication, assembly, test, and integration of a circuit card. Designs include technology of processors, FPGAs, memory, and industry interfaces, such as PCIe, Ethernet, I2C, UART. Candidates can independently determine and develop approach to solutions to contribute to the completion of specific programs and projects.



Required Skills:

• A minimum of 4 years’ experience in Digital Design

• Proven ability to take a design concept from the block diagram or requirements level and develop a complete hardware design

• Experience with PCB design tasks and proven ability to use tools to design (schematic capture), analyze and simulate designs prior to hardware execution.

• Experience with embedded test techniques, design for test, design margin analysis and circuit design for production

• A strong advocate for process improvement

• A self-motivated and effective communicator

• Experience in managing schedule and resources to meet assigned milestones

• Ability to obtain and retain security clearance

Desired Skills:

• Experience using Mentor Graphics Design Creation tools: DxDesigner, xDX Designer VX, and Constraint Editor System (CES)

• Experience using Mentor Graphics PCB electronic circuit design software: HyperLynx signal integrity, power integrity, and analog simulation, Xpedition Enterprise (xPCB)

• Six Sigma specialist

Required Education (including Major):

Bachelor’s Degree in Electrical Engineering (MS preferred) or similar degree and meets the experience requirements
 
Job Number: 38760
Job Location: Huntsville, Al
Duration: 18 months
Start Date: ASAP
Input Date: 12/06/2017
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Rick Nussbaum
Address: 1700 WELLS RD STE 1
City, State: ORANGE PARK, FL 32073-2373
Phone: 904/562-3215
800 Phone: 866/277-3343
Fax Phone: 904/713-2000
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Principal Engineer (EMI/ EMC Electromagnetic Interference) - Domestic and International Programs
This position is based with the IDS Electrical Design Directorate Seapower and Electronic Systems Department in Marlborough, MA. Our engineers develop state of the art technology in support of multiple programs, international and domestic, deployed throughout the globe.
We are looking for an experienced Engineer in the field of EMI/ EMC electromagnetic interference/ electromagnetic compatibility. The candidate should possess at least 10 years of experience in this field with 10 years of engineering experience and have experience with both military and commercial standards, including but not limited to MIL-STD-461F and above, MIL-STD-464C and above, EN5550X, EN61000-XX and FCC Part 15. A critical skill will be ability to perform analysis with respect to NSTISSAM TEMPEST/2-95 and experience with the Certified TEMPEST Technical Authority (CTTA) and NSA TAG certified TEMPEST Professional Level 1 or 2. Additional areas of expertise will include experience in the design and verification analysis of EMI/EMC, Electrostatic Discharge (ESD), Hazards of Electromagnetic Radiation to Personnel (HERP), and Hazards of Electromagnetic to Ordnance (HERO), Lightning, EMP and High Altitude EMP, Shielding effectiveness and ESD. Also desirable would be familiarity with TEMPEST filter designs and isolation techniques.
Additional skills required include a background in E3/ TEMPEST testing, including test plan development, test execution and report generation.
Required Skills:
•5+ years of experience in field of TEMPEST analysis including NSA TAG certification TEMPEST professional Level 1.
•10+ years of experience in the field of EMI/ EMC including Electrostatic Discharge, Hazards of Electromagnetic Radiation (RADHAZ) , Lightning, EMP and High Altitude EMP analysis and/ or test.
•Familiarity with both Military and commercial standards including but not limited to MIL-STD-461F and above, MIL-STD-464C and above, EN5550X, EN61000-XX and FCC Part 15.
•Familiarity with design simulation tools including AutoCAD, Mathcad, MatLab, FloEMC, XFDTD, EMPro, ANSYS and NEC4.
•Basic project planning and tracking experience
Desired Skills: •NSA TAG certification TEMPEST professional Level 2
•NARTE Engineering Electromagnetic Compatibility/Interference (EMC/EMI) Certification
•10+ years of EMC and design experience
•Background in E3 testing including test plan development, test execution and report generation Required Education (including Major):
•BS in Engineering, Science or Mathematics plus 10 years experience
•MS in Engineering, Science or Mathematics with 5 years experience
•PhD in Engineering, Science or Mathematics with 5 years experience
 
Job Number: 40004
Job Location: Marlborough, MA
Duration: C-P
Start Date: ASAP
Input Date: 12/05/2017
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Rick Nussbaum
Address: 1700 WELLS RD STE 1
City, State: ORANGE PARK, FL 32073-2373
Phone: 904/562-3215
800 Phone: 866/277-3343
Fax Phone: 904/713-2000
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
SUMMARY
Performs a variety of engineering work including design, analysis, substantiation, certification, drawing interpretation and project management as related to transport category aircraft.

ESSENTIAL DUTIES AND RESPONSIBILITIES
Create step by step work instructions for the removal and installation of hardware and components as they relate to aircraft structures, systems, interiors and avionics. Troubleshooting of noted aircraft systems Repair, design and analysis of metal, composite and metal bond structures Knowledge of the Federal Aviation Regulations FARs from Title 14 of the Code of Federal Regulations as they apply to transport category aircraft. Knowledge of cabin specific regulatory requirements, including flammability and crashworthiness as examples Familiarity with the Supplemental Type Certificate STC process Familiarity with the FAA Airworthiness Directive AD process and rules governing disposition Translates guidance and engineering principles and procedures into usable working direction for assigned projects Ability to read and interpret technical drawings, preferably those created by Boeing, Airbus and Douglas. They should also be familiar with the documents needed to routinely maintain commercial aircraft Structural Repair Manual SRM, Aircraft Maintenance Manual AMM, Illustrated Parts Catalog IPC, etc. Ability to analyze Original Equipment Manufacturer OEM source documents Service Bulletins, Service Letters, etc. and make independent decisions based on analysis of available data regarding incorporation on Customers fleet. Ability to quickly learn and adhere to Operators specific processes and procedures. Project Management skills multiple task Gathers, coordinates and applies basic engineering data using established and appropriate or defined engineering principles and procedures Applies area of specialty to design, develop and implement creative and innovative solutions to difficult problems Reviews progress with management and recommends corrective action along with review of alternatives Performs such individual assignments as supervisors and superiors may direct ensures adequate and continuous controls are exercised over all assigned activities affecting quality establishes and maintains effective work relationships within the department, the Corporation and the community and maintains the professional competence, knowledge and skill necessary for the satisfactory performance of all assigned responsibilities Travel as required All other duties as assigned.
 
Job Number: 17-729
Job Location: Midwest
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 03/21/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
• Security Clearance desirable but not required.

• Experience: 8+ years of domain experience
focused on the analysis and troubleshooting aspect and not someone who has only designed.

• Design, development, modification and analysis of various electronic systems.

• Troubleshoot and diagnose malfunctions in new/existing products or systems and makes modifications as needed.

• Compile and evaluate design and test data.

• Analyze, develops and recommends design approaches.

• Must be familiar with VHDL, Verilog, FPGAs, CPLDs, Schematic Capture/Simulation (preferably Mentor tools). 8-10 years Hardware design experience
 
Job Number: 40855
Job Location: OH
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 11/29/2017
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Location: Savannah, GA
Pay Rate: $58/hr - $63/hr
Duration: Long Term Contract
Shift: First

Unique Skills:
-This position will review designs for Electrical Systems aspects.
-Activities include interacting and coordinating with DERs/ARs during a certification project, coordinating, tracking and completing certification tasks, writing certification plans, test plans, test reports and preparing related paperwork and forms.
-The ideal candidate will have:
-At least one (1) year experience with certification activities associated with STC projects
-Experience with aircraft interior outfitting preferred.
-Current Electrical Systems DER/AR designation preferred
-EWIS experience desirable

Education and Experience Requirements:
-Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

-Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area.

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7129
Job Location: Savannah, GA
Rate: 58.00-63.00
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 05/22/2018
Last Updated: 06/11/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Level 2

Description:
Electrical Engineer - Level 2 (Integrated Circuit Layout Engineer)

Location: Santa Barbara, CA
Pay Rate: DOE ($50/hr - $70/hr)
Duration: 1 year W2 contract
Shift: First, 4x10, no OT
**MUST be a U.S. CITIZEN**
**MUST be ELIGIBLE to obtain a SECRET CLEARANCE**

Description
INTEGRATED CIRCUIT LAYOUT ENGINEER - Performs transistor level silicon layout of CMOS integrated circuits for read-out integrated circuit infrared applications.

Skill/Experience/Education (Mandatory):
-Performs transistor level silicon layout of CMOS integrated circuits for read-out integrated circuit infrared applications.
-IC Layout Engineering: CMOS VLSI transistor level layout (4-5 years' required)
-BS degree or higher.
-Must be U.S. Citizen.
 
Job Number: 7887
Job Location: Santa Barbara, CA
Rate: 50-70
Per Diem: Split Possible
Overtime: No
Duration: 1 year
Start Date: ASAP
Input Date: 10/23/2017
Last Updated: 02/05/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Level 3

Description:
Electrical Engineer - Level 3 (ACTIVE DoD SECRET REQUIRED)

Location: Lexington, KY
Pay Rate: DOE ($35/hr - $45/hr)
Duration: 9 month W2 contract
Shift: First, 5/40, no OT
**MUST be a U.S. CITIZEN**
**MUST have an ACTIVE DoD SECRET CLEARANCE**

Description
As an Electrical Engineer, you will work as part of an engineering team. The team is focused primarily on modifying existing hardware and integrating components into various platforms based on customer specifications.
Your job will be to develop component and system designs based on customer requirements and interface control documents or other similar information. Your designs will comply with applicable military specifications, SAE, ANSI, ASME, and other related design and drafting standards.
Upon design completion, you will be expected to support the fabrication, installation, and integration of your design by providing support to the manufacturing and installation workforce as required.
Experience with aircraft wiring and electrical systems
Ability to create and review various electrical drawing types (wire diagram, termination, cable harness, routing)
Experience with AutoCAD or similar 2D drafting tool Demonstrated previous success working in a team based environment to meet objectives
Strong communication skills, both oral and written Familiarity with SAE AS50881 design guidelines
Understanding of ANSI/ASME Y14.100 or related design and drafting standards
Familiarity with C-130 or other fixed wing aircraft Experience with an engineering change process and/or configuration control process

Skill/Experience/Education (Mandatory):
ACTIVE DoD SECRET CLEARANCE
AutoCAD – (4+ years required)
MS Office Suite – (4+ years required)

Desired:
CATIA V5
TeamCenter Engineering
JobScope/ IT Reports
 
Job Number: 8325
Job Location: Lexington, KY
Rate: 35.00-45.00
Per Diem: Split Possible
Overtime: No
Duration: 9 mos
Start Date: ASAP
Input Date: 12/11/2017
Last Updated: 02/19/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Level 3

Description:
Electrical Engineer - Level 3

Duration: 1 year contract
Pay Rate: DOE ($50/hr - $55/hr)
Location: Grand Prairie, TX
Shift: First, 9/80
*The engineer must have an active SECRET security clearance and it is preferred that the employee's investigation is in scope (investigation performed within the past 5 years)*

Job Description:
-Analog engineer is required to design a power voltage card to convert voltages between mature subsystems.
-The power voltage card will need to fit within an existing space.
-This effort will require part selection, design review, and design release.
-The engineer must have an active SECRET security clearance and it is preferred that the employee's investigation is in scope (investigation performed within the past 5 years).
-The engineer must be proficient in Cadence; have good communication skills.

Mandatory Skills:
-Must have an active SECRET security clearance and it is preferred that the employee's investigation is in scope (investigation performed within the past 5 years).
-Bachelors degree in Electrical Engineering with five or more years of experience.
-Must be willing to accept a wide variety of work assignments supporting the total end-to-end process of capturing, designing, developing, testing, manufacturing, and life-cycle support of electronic systems.
-Must possess strong general electrical engineering knowledge and be familiar with circuit design and components to include electronics testing and troubleshooting.
-Experience in electronic system and subsystem design and test, systems analysis, software-driven operations and test schemes.
-Strong electronic systems integration tasking, estimating, testing and excellent trouble shooting skills.
-Proficiency with electronic analyzers and other trouble shooting tools is required.
-Ability to develop system and subsystem performance requirements.
-Ability to use test equipment to support acceptance testing, manufacturing production and in-process testing, data processing and analysis.

REQUIRED Skill Matrix:
-Power regulation circuit design experience. Schematic entry. PSPICE analysis. Derating analysis. etc. : (9-10 years)
 
Job Number: 7065
Job Location: Grand Prairie, TX
Rate: 50.00-55.00
Per Diem: Possible
Overtime: Yes
Duration: 1 year
Start Date: ASAP
Input Date: 02/14/2017
Last Updated: 12/26/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Electrical Engineer 2 - O/M - LA

Description:
Chipton-Ross is seeking a Electrical Engineer 2 for an opening in Avondale, LA.

RESPONSIBILITIES:
Candidate will be responsible for establishing, overseeing, and managing all activities related to assigned shipboard systems. Candidate will perform the following: Research, development, and design of electrical components, equipment, systems, and networks in accordance with all contractual requirements, military and commercial specifications; initiate procurement specifications; review and approve vendor proposals; review, comment on, adjudicate and approve vendor furnished information for translation into construction products; interface with vendors and Navy technical representatives; support vendor design reviews and testing; develop drawings and other documents IAW Mil-Specs and contract drawings; interface with other disciplines and departments to ensure a seamless integration of assigned systems into the shipboard environment; address and resolve technical issues, and make decisions on problems in his/her area of responsibility; support shipbuilding production department as required.

REQUIRED EXPERIENCE:
Bachelor's of Electrical Engineering with two years of engineering experience or Master's of Electrical Engineering with no prior experience, or similar degree background. . Previous shipbuilding experience is highly desired. A qualified candidate should be proficient in Microsoft Office applications and AutoCAD 2014.

ADDITIONAL EXPERIENCE:
It is preferred that the candidate be familiar with shipboard Interior Communications systems such as Switchboards, Telephone systems, Announcing, TV and Audio, Alarms, Indicating, etc. and have an understanding of the typical shipboard interfaces, interconnections, and integration requirements. Familiarity with electrical power distribution systems, control systems, and C4ISR systems is a plus. Current clearance is also a plus.

EDUCATION:
Bachelor's of Electrical Engineering

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 155942
Job Location: Avondale, LA
Rate: $42 to $46.00 DOE
Duration: 1 year
Input Date: 06/03/2016
Last Updated: 12/15/2018
Firm Name: CHIPTON ROSS
Attention: Andrew Craft
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: acraft@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer II ( Chandler, AZ ) 7802712

Description:
Electrical Engineer II ( Chandler, AZ ) 7802712
11 month Contract

Pay Rate: $50/hr w2

Work with a team of engineers to develop electromagnetic models to capture electromagnetic environment effects (E3)including the prediction of pin level transients. Work within a cross functional team to leverage inputs from CAD, subsystems and systems engineering to develop a baseline electromagnetic model and increment as the system design evolves to capture E3 effects. Updates to the model may include general design changes or the evaluation of potential mitigation approaches. Responsible for model validation through the selection of hardware sets which may be components, subsystems or a combination of them. Includes the development of test plans for the evaluation of those hardware sets with demonstration of model validation though appropriate comparisons between the model and measurements. Travel of up to 25% of the time may be required.

Job Snapshot: Must haves:
Experience with electromagnetic environment effects (E3). On the resume that may show up as intra-system electromagnetic compatibility (EMC), Subsystem and equipment electromagnetic interference (EMI), Lightning,…
Aerospace experience (rocket (launch) or satellite systems)
Active Secret Clearance (or cleared within the past year)
 
Job Number: 7802712
Job Location: Chandler, AZ
Rate: 50
Per Diem: Yes
Overtime: yes
Duration: 11 month
Start Date: ASAP
Input Date: 01/19/2018
Firm Name: TALENTPRO CONSULTING
Attention: tim
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X101
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer III ( New Church , VA ) 7043984, Antares Spacelift

Description:
Electrical Engineer III ( New Church , VA ) 7043984
12 Month Contract

Pay rate: $50 - 55/hr w2

Integration & Test Electrical Engineer will support the Antares Spacelift Program. The Antares Program launches spacelift vehicles out of Wallops, VA, to delivery supplies and scientific equipment to the Space Station.

The Integration & Test Engineer will manage assembly, integration, and test of space launch vehicle flight hardware at the Wallops launch site. Specific duties include hands-on electrical integration of flight hardware, developing/maintaining processes and procedures for vehicle assembly and vehicle testing, hands-on electrical testing of flight hardware, and documenting and pursuing root cause of discrepancies found with hardware.

• Bachelors Degree (BS) in Electrical Engineering • 10 years of electrical hands-on integration & test or related experience is required
• Experience with rocket systems is required
• Experience managing/mentoring less experienced electrical engineers
• Ability to work in a fast pace team environment and multi-task
• Strong written and verbal communication skills • Ability to solve problems • Travel availability 5%
 
Job Number: 7043984
Job Location: New Church, VA
Rate: Open
Per Diem: Split
Overtime: Yes
Duration: 12 Month
Start Date: ASAP
Input Date: 01/19/2018
Firm Name: TALENTPRO CONSULTING
Attention: Tim
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X101
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer-Tucson, AZ - McKinney, TX - Huntsville, AL

Description:
Job Description:
Senior Designer or Electrical Engineer with understanding and wide application of technical theories, and concepts in digital design, with general knowledge of other related disciplines. The Senior Designer provides technical solutions to a wide range
of difficult problems. This position will function in a multi-disciplined design team. The person will be the Responsible Engineering Authority (REA) for hardware design, fabrication, assembly, test, and integration of a circuit card. Designs include technology of processors, FPGAs, memory, and industry interfaces, such as PCIe, Ethernet, I2C, UART. Candidates can independently determine and develop approach to solutions to contribute to the completion of specific programs and projects.

Required Skills:
• A minimum of 4 years’ experience in Digital Design
• Proven ability to take a design concept from the block diagram or requirements level and develop a complete hardware design
• Experience with PCB design tasks and proven ability to use tools to design (schematic capture), analyze and simulate designs prior to hardware execution.
• Experience with embedded test techniques, design for test, design margin analysis and circuit design for production
• A strong advocate for process improvement
• A self-motivated and effective communicator
• Experience in managing schedule and resources to meet assigned milestones
• Ability to obtain and retain security clearance

Desired Skills:
• Experience using Mentor Graphics Design Creation tools: DxDesigner, xDX Designer VX, and Constraint Editor System (CES)
• Experience using Mentor Graphics PCB electronic circuit design software: HyperLynx signal integrity, power integrity, and analog simulation, Xpedition Enterprise (xPCB)
• Six Sigma specialist
Required Education (including Major):
Bachelor’s Degree in Electrical Engineering (MS preferred) or similar degree and meets the experience requirements

**Must be able to obtain/maintain a Secret clearance - Can start without

Multiple locations-
Tucson, AZ - McKinney, TX - Huntsville, AL
 
Job Number: NH
Job Location: Hunstville, AL
Input Date: 12/07/2017
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Gina Smith
Address: 7310 RITCHIE HWY STE 400
City, State: GLEN BURNIE, MD 21061-3092
800 Phone: 866/277-3343
Website: www.apollopros.com

Electrical Engineers

Description:
Vehicle systems integration
 
Job Location: OH/MI/IN
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: jmac@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineers - Santa Barbara, CA

Description:
STS AeroStaff Services now offers Electrical Engineer jobs in Santa Barbara, California.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Duties:

• Designs, develops, and tests CMOS integrated circuits for read-out integrated circuit infrared applications

Qualifications:

• MUST have integrated circuit design engineering experience
• Must be a U.S. Citizen

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 40743
Job Location: Santa Barbara, CA
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 11/29/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Harness Installation Engineer-Special Missions

Description:
UNIQUE SKILLS
Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project. Aerospace experience is required. Knowledge of Catia V5 is required. Candidate must be able to design wire harness assemblies and installations utilizing the Catia V5 Electrical and Sheet Metal Work Benches. Must have intimate knowledge of an ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements, while meeting all installation and maintainability requirements. Candidate must possess knowledge of regulatory guidance material relative to aircraft harness design. Excellent verbal and written communication skills, and computer skills (Catia V5, Catia V4, PC/MS Office) are required.

JOB DESCRIPTION
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs. in the specific technical discipline or 10 yrs. broad engineering experience in several technical disciplines with Bachelors, or 3 yrs. in the specific technical discipline with Masters, or 1 yr. in the specific technical discipline with PhD. Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Client products and services

PRINCIPAL DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

ADDITIONAL FUNCTIONS
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned
 
Job Number: 17-783-115282
Job Location: Southeast
Rate: $58.00 to $63.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 07/11/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Harness Installation Engineer - Special Missions

Description:
Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Duration: Long Term Contract (1-4 years)
Shift:1st Shift


Unique Skills:
Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project. Aerospace experience is required. Knowledge of Catia V5 is required. Candidate must be able to design wire harness assemblies and installations utilizing the Catia V5 Electrical and Sheet Metal Work Benches. Must have intimate knowledge of an ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements, while meeting all installation and maintainability requirements. Candidate must possess knowledge of regulatory guidance material relative to aircraft harness design. Excellent verbal and written communication skills, and computer skills (Catia V5, Catia V4, PC/MS Office) are required.

Job description:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

Principal Duties and Responsibilities:
Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned
 
Job Number: 7876
Job Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 03/09/2018
Last Updated: 03/12/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Power System Engineer

Description:
• System Certification Requirements: Cert Plan, Flight Test Plan, Flight Test Report, Qual Test Report, Lab test report, Testing requirements/Flight Clearance and or SOF Requirements, development testing
• Hardware Qualification: Plans, procedures, Reports, conformity, ATP & Outline Drawings
• Software Certification: Experience reviewing PSAC, CIA, SAS.
• Experience in software V&V.

Required Experience in the following:
• Electrical Power Generation, control and indicating
• Secondary Power Distribution, control and indicating
• Solid State Electrical Power.

Desired Experience in the following:
• Working Knowledge ARP4754 and CFR 25
• Project Management

Skills/Experience:
• Configuration change management
 
Job Number: 24-174
Job Location: Savannah, GA
Rate: $58 - $63
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 09/25/2017
Last Updated: 02/06/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Power-Loads Engineering Contractor - Special Missions

Description:
UNIQUE SKILLS
Required Experience in the following:
• Electrical Power Generation, control and indicating
• Power Distribution, control and indicating
• Electrical Load Analysis

JOB DESCRIPTION
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs. in the specific technical discipline or 10 yrs. broad engineering experience in several technical disciplines with Bachelors, or 3 yrs. in the specific technical discipline with Masters, or 1 yr. in the specific technical discipline with PhD. Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of client products and services

PRINCIPAL DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

ADDITIONAL FUNCTIONS
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

OTHER REQUIREMENTS
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
Desired Experience in the following:
• Working Knowledge ARP4754 and CFR 25
• Project Management Skills/Experience
• Configuration change management
 
Job Number: 17-742-103561
Job Location: Southeast
Rate: $58.00 to $63.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 07/11/2018
Last Updated: 07/20/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Systems Engineer

Description:
Unique Skills:
• Avionics System Integration Experience Require, Honeywell Epic System Experience Preferred

Position Purpose:
• Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of products and services

Education and Experience Requirements:
• Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Essential Functions:
• Contributes to planning, developing and coordinating of important engineering projects
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
• Acts as liaison with representatives outside of the assigned group/area
• Actively works to improve daily processes and ensures all work meets customer requirements
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
• Performs other duties as assigned
• Advanced degree in engineering related field preferred
• The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 24-215
Job Location: Savannah, GA
Rate: $58 - $63
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 02/22/2018
Last Updated: 05/17/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Systems Engineer

Description:
Electrical Systems Engineer

Location: Savannah, GA
Pay Rate: $58/hr - $63/hr
Duration: Long Term W2 Contract
Shift: First

Unique Skills:
-Avionics System Integration Experience Required
-Honeywell Epic System Experience Preferred

Education and Experience Requirements:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

Principal Duties and Responsibilities/Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 8227
Job Location: Savannah, GA
Rate: 58.00-63.00
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/10/2017
Last Updated: 02/19/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Systems Engineer

Description:
Electrical Systems Engineer

Location: Savannah, GA
Pay Rate: $58/hr - $63/hr
Duration: Long Term Contract
Shift: First

Unique Skills:
Aircraft power / electrical / avionic systems design, integration and implementation. (design, certification and system support)

Job description:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

Principal Duties and Responsibilities/Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 7677
Job Location: Savannah, GA
Rate: 58.00-63.00
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 03/07/2018
Last Updated: 05/17/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Electrical Technician

Description:
One year in length
Maximum Hourly pay rate $18.00
Tests and troubleshoots electronic products using standard and specialized test equipment. 

1. Troubleshoots electronic products to sub-assembly and component level utilizing schematics and standard troubleshooting practices and procedures 
2. Sets up test equipment and tests electronic products using established test procedures and schematics
3. Provides technical guidance to assemblers and re-work assemblers 
4. Performs cross functional tasks within fairly similar situations resulting in standardized but not identical outcomes

5. Knowledge of the operation and use of electronic production test equipment and hand assembly tools used in a high tech surface mount & through-hole technology manufacturing and production environment
6. Knowledge of advanced electronic test and troubleshooting techniques to component level.
7. Uses product test and measurement equipment, digital/analog voltmeters, oscilloscopes, hi-pot meters, power supplies, and automatic and standard test equipment, etc.
8. Recommends and/or proposes process improvements 
8. Ensures that all relevant quality information/feedback is provided 
10. Utilizes written or visual instructions involving use of quantitative information from specifications, schematics, graphs, pictures, gages, etc.
11. Provides written and/or oral communications concerning a variety of situations following test, troubleshooting, examinations, etc.
12. Keeps workstation, tools and equipment in a neat and orderly manner 
13. Understands and complies with all Company, safety rules and regulations

Requirements/Knowledge: 

v Education Required:
o Associate degree in Electronics (2 year) or certified program (18 mos.) plus 1 year of experience

v Experience 
o 1-3 years of electronics related experience

v Skill Level Required: 
o Skills required in maintaining close specifications using tools & gages, schematics and a variety of electronic equipment 

o Should have a high level of electrical and mechanical aptitude and analytical skills
o Ability to interpret drawing and specifications
o Basic computer skills
o Knowledge of manufacturing processes and how to effectively troubleshoot problems
o Should possess dexterity skills, good hand & eye coordination 
o Willing and able to take and pass basic electronics test 

Desired Qualifications:

v Past experience in a manufacturing environment
v Past experience in a self-directed teaming environment
v Lean manufacturing knowledge
v Understanding of IPC-A-610 standards
 

 
Job Number: 1710063131
Job Location: Bohemia, NY
Duration: 12 months
Input Date: 01/31/2017
Last Updated: 12/14/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Eric Khassanov
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002G9j8AAC&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical/Aircraft Cabin Interiors & Systems Engineering Contractor

Description:
Electrical/Aircraft Cabin Interiors & Systems Engineer

Location: Savannah, GA
Pay Rate: $58/hr - $63/hr
Duration: Long Term Contract
Shift: First

Unique Skills:
Ideal Candidates will have electrical engineering experience with Aircraft Cabin Interiors and Systems to include but not limited to:
- Cabin Management System
- Cabin Entertainment System
- Cabin Lighting
- Cabin Switch Controls
- Telephone System
- Satellite communications
- Water System
- Waste System
- EWIS
- Cabin interior monuments
- Seats

Education:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area.

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 7428
Job Location: Savannah, GA
Rate: $58-$63
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 03/07/2018
Last Updated: 04/24/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical/Project Engineer

Description:
Electrical/Project Engineer

Location: Windsor Locks, CT
Pay Rate: $58/hr
Duration: 1 year W2 contract
Shift: First, 8:00am to 5:00pm
**MUST be a U.S. CITIZEN**

Description/Comment:
Manages a team and provides direction on research, development, design, and testing of electrical components, PC Board Layout, Electronics Packaging equipment, facilities, systems, products and networks for commercial, industrial and governmental purposes.

Additional Job Details:
The Human Exploration & Launch business within ISR & Space Systems provides Environmental Control and Life Support Systems in deep space, low earth orbit, undersea, and on the ground. Our hardware is paramount to survival in harsh environments, and our passion for our work demands excellence in everything we do, from the talent we recruit to the highly-engineered systems we deliver. We value people, integrity, ideas and performance. This posting is for a project engineering position at this Company – ISR & Space Systems in Windsor Locks, CT supporting various platforms.
The candidate will work within an Integrated Product Development Team to support the design and development of various electronic controls; will work with the Project Engineer to execute project to meet schedule and budget milestones; and will collaborate with a wide variety of functional areas inside and outside the organization to ensure successful completion of program requirements.

Education
Candidate will have BS in Electrical Engineering with 4 years of working experience in the aerospace industry.

Responsibilities
• Coordinate Integrated Product Development Team activities (design, procurement, fabrication and test)
• Assist Control Account Managers with Earned Value Management (EVMS) by monitoring program cost and schedule performance
• Assist Control Account Manager with Estimate to Complete
• Coordinate activities associated with review and approval of engineering specifications and engineering drawings
• Initiate and process Engineering Changes working with all engineering disciplines to implement approved changes. This will include marking drawings, copying prints, creating PDF’s to support Company electronic Engineering Change process.
• Coordinate, track and support the assembly and test of development hardware
• Support supplier selection and part procurement
• Provide status reports
• Support program reviews both internal and external
• Coordinate closure of action items
• Support operations to fabricate, assemble, test and qualify flight hardware
• Ensure standard work flow maps are complete
• Document activities and programs worked with time spend on various activities. This information will be submitted weekly and summed monthly by person with the monthly invoice.

Skills/Experience
• Ability to perform as part of a cross-functional team and coordinate the activities of various engineering disciplines including electrical and mechanical design, systems, components, materials development, process development, and supplier development
• Strong project management, organizational and prioritization skills
• Ability to work independently or as part of an integrated product team
• Able to understand electrical circuitry and able to recommend trouble shooting test steps to the stakeholders
• Ability to read and understand technical manuals, blueprints or drawings
• Prepare test plans, analyze test data, and prepare reports to support project activity, and maintain up-to-date records of project test results
• Understanding Earned Value Management Basics
• Strong troubleshooting and problem solving skills
• Must understand fundamentals of Root Cause Analysis
• Interface with shop floor personnel for the purpose of communicating technical, quality, and inspection information
• Strong written and verbal skills including thorough knowledge of Microsoft Office products
 
Job Number: 8278
Job Location: Windsor Locks, CT
Rate: 58
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/16/2017
Last Updated: 12/18/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electromechanical Design Engineer

Description:
Electromechanical Design Engineer

Location: Orlando, FL
Pay Rate: DOE ($45/hr - $55/hr)
Duration: 1 year W2 contract
Shift: not specified
**MUST be a U.S. CITIZEN**

Duties:
-An Electromechanical Design Engineer is responsible for the design, documentation and production floor support of hardware (missile electronics, missile electrical cabling, airborne support equipment, ground support equipment and test sets).
-Additional duties include investigation of discrepant hardware and test anomalies.

Skills Required:
-Must have at minimum a Bachelor of Science degree in an Engineering related discipline.
-Design experience with electrical cables, test sets, breakout boxes, 19” support equipment rack design
-Proficiency with Creo Parametric 2.0 Cabling and Intralink.
-Proficiency with ASME Y14.5M-1994 and generating detailed engineering drawings.
-Proficiency with reading schematics for electrical cable assemblies in order to define and select connectors, backshells, splices, wiring, etc.
-Basic computer skills and a working knowledge of Microsoft Office products (Word and Excel)
-Compliance to quality and safety policies at all times!
-Must be a US Citizen
-Physical Requirements – This work requires delicate handling, reaching, light lifting and may require a combination of sitting and standing as well as walking between test locations and occasional use of small step-ladders.
DESIGN ENGINEER CREO CABLING ASME/ANSI READING SCHEMATICS

Desired:
-Experience with design of flexible and semi-rigid RF cables

Education:
-Must have at minimum a Bachelor of Science degree in an Engineering related discipline.
 
Job Number: 8364
Job Location: Orlando, FL
Rate: 45-55
Per Diem: Split Possible
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 01/09/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Electronic Troubleshooter

Description:
Tests and troubleshoots electronic products using standard and specialized test equipment. 

1. Troubleshoots electronic products to sub-assembly and component level utilizing schematics and standard troubleshooting practices and procedures 
2. Sets up test equipment and tests electronic products using established test procedures and schematics
3. Provides technical guidance to assemblers and re-work assemblers 
4. Performs cross functional tasks within fairly similar situations resulting in standardized but not identical outcomes

5. Knowledge of the operation and use of electronic production test equipment and hand assembly tools used in a high tech surface mount & through-hole technology manufacturing and production environment
6. Knowledge of advanced electronic test and troubleshooting techniques to component level.
7. Uses product test and measurement equipment, digital/analog voltmeters, oscilloscopes, hi-pot meters, power supplies, and automatic and standard test equipment, etc.
8. Recommends and/or proposes process improvements 
8. Ensures that all relevant quality information/feedback is provided 
10. Utilizes written or visual instructions involving use of quantitative information from specifications, schematics, graphs, pictures, gages, etc.
11. Provides written and/or oral communications concerning a variety of situations following test, troubleshooting, examinations, etc.
12. Keeps workstation, tools and equipment in a neat and orderly manner 
13. Understands and complies with all Company, safety rules and regulations

Requirements/Knowledge: 

v Education Required:
o Associate degree in Electronics (2 year) or certified program (18 mos.) plus 1 year of experience

v Experience 
o 1-3 years of electronics related experience

v Skill Level Required: 
o Skills required in maintaining close specifications using tools & gages, schematics and a variety of electronic equipment 

o Should have a high level of electrical and mechanical aptitude and analytical skills
o Ability to interpret drawing and specifications
o Basic computer skills
o Knowledge of manufacturing processes and how to effectively troubleshoot problems
o Should possess dexterity skills, good hand & eye coordination 
o Willing and able to take and pass basic electronics test 

Desired Qualifications:

v Past experience in a manufacturing environment
v Past experience in a self-directed teaming environment
v Lean manufacturing knowledge
v Understanding of IPC-A-610 standards
 
Tests and troubleshoots electronic products using standard and specialized test equipment. 

1. Troubleshoots electronic products to sub-assembly and component level utilizing schematics and standard troubleshooting practices and procedures 
2. Sets up test equipment and tests electronic products using established test procedures and schematics
3. Provides technical guidance to assemblers and re-work assemblers 
4. Performs cross functional tasks within fairly similar situations resulting in standardized but not identical outcomes

5. Knowledge of the operation and use of electronic production test equipment and hand assembly tools used in a high tech surface mount & through-hole technology manufacturing and production environment
6. Knowledge of advanced electronic test and troubleshooting techniques to component level.
7. Uses product test and measurement equipment, digital/analog voltmeters, oscilloscopes, hi-pot meters, power supplies, and automatic and standard test equipment, etc.
8. Recommends and/or proposes process improvements 
8. Ensures that all relevant quality information/feedback is provided 
10. Utilizes written or visual instructions involving use of quantitative information from specifications, schematics, graphs, pictures, gages, etc.
11. Provides written and/or oral communications concerning a variety of situations following test, troubleshooting, examinations, etc.
12. Keeps workstation, tools and equipment in a neat and orderly manner 
13. Understands and complies with all Company, safety rules and regulations

Requirements/Knowledge: 

v Education Required:
o Associate degree in Electronics (2 year) or certified program (18 mos.) plus 1 year of experience

v Experience 
o 1-3 years of electronics related experience

v Skill Level Required: 
o Skills required in maintaining close specifications using tools & gages, schematics and a variety of electronic equipment 

o Should have a high level of electrical and mechanical aptitude and analytical skills
o Ability to interpret drawing and specifications
o Basic computer skills
o Knowledge of manufacturing processes and how to effectively troubleshoot problems
o Should possess dexterity skills, good hand & eye coordination 
o Willing and able to take and pass basic electronics test 

Desired Qualifications:

v Past experience in a manufacturing environment
v Past experience in a self-directed teaming environment
v Lean manufacturing knowledge
v Understanding of IPC-A-610 standards
 
 
Job Number: 1710066458
Job Location: Bohemia, NY
Duration: 12 months
Input Date: 04/07/2017
Last Updated: 12/14/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Eric Khassanov
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000021ioWAAQ&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer

Description:
Major purpose:
We are currently seeking a Senior Software Engineer with experience writing embedded software. This individual will have the opportunity to work on Infrared Product lines, responsible for a variety of software tasks throughout the full lifecycle. Responsibilities include designing, coding, documenting, and testing C and C++ applications/systems. General knowledge of hardware and communication protocols is a huge plus.
Major functions:

Technical/Functional skills:
Education/Experience/Licenses etc.: Required Competencies/Skills:
• Experience using C/C++ to develop embedded software
• Experience with Real-Time Operating Systems (FreeRTOS a plus)
• Excellent verbal and written communication skills
• Demonstrated ability to work as part of a team
• 6+ years of experience
• Minimum of BS in Computer Engineering, Electrical Engineering, Computer Science or similar

Preferred Competencies/Skills:
• Experience with Communication Protocols (Ethernet, RS422, CoaXpress, Camera Link, GigE Vision, etc.)
• Experience working with other programming languages such as C#, MATLAB, Python, etc.
• Experience in the Defense, Space, Aerospace, or similar industries
• Experience using Quartus and Altera/Client tools
• Experience using electronic test equipment such as oscilloscopes, DMMs, and basic lab equipment
• Experience with Linux and Windows Development Environments
• Basic knowledge of circuits, schematics, and hardware design
 
Job Number: 17-53009
Job Location: Mason, OH
Rate: 65.00 - 85.00
Per Diem: No
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 12/07/2017
Firm Name: NESCO RESOURCE
Attention: Sebastian Hernandez
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer - Level 3

Description:
Embedded Software Engineer - Level 3

Location: Archbald, PA
Pay Rate: DOE ($40/hr - $55/hr)
Duration: 1 year contract
Shift: First, 9/80, OT
Travel: Possible occasional travel to customer or vendor sites
**MUST be a U.S. CITIZEN**
**MUST be ELIGIBLE for a SECRET CLEARANCE – ACTIVE SECRET CLEARANCE PREFERRED**

Description
-Designs, develops, operates, and maintains software and firmware components and computing systems software to be applied to and integrated with engineering, scientific, and manufacturing requirements.
-Applies the appropriate standards, processes, procedures, and tools throughout the system development life cycle to support the generation of such engineering applications and products such as laboratory simulation systems, airplane flight control and display systems, avionics, mechanical and electrical systems, weapons armament, commercial and military aircraft systems, mobile and ground-based defense systems, space systems, and other systems and applications of this nature.
-Interfaces with customers, suppliers, application users, and other technical and support personnel.

Skill/Experience/Education (Mandatory):
- C/C++ programming: (6-8 years' experience required)
-Embedded software: (6-8 years' experience required)
-Hardware/software integration: (4-5 years' experience required)
-Software documentation experience
-Software verification experience
 
Job Number: 7788
Job Location: Archbald, PA
Rate: 40-55
Per Diem: Split Possible
Overtime: Yes
Duration: 1 year
Start Date: ASAP
Input Date: 12/01/2017
Last Updated: 02/05/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software engineer (UAV Controls)

Description:
Role: Embedded Software engineer (UAV Controls)
Location: Sterling, VA 20164 - 7104
Duration: 12+ Months Contract
Could be contract to hire for the right candidate

Please Note: 'U.S. Citizens OR Permanent Residents and those authorized to work in the U.S. are encouraged to apply. We are unable to sponsor at this time.'
No vendors!! Direct consultants only please.

Role Description: Develop an integrated inertial navigation system and flight control system for an unmanned aerial vehicle. This includes software for a board support package, framework, vehicle state estimation, autopilots and mission planning.

Position responsibilities:
• Design, code, test, and provide ongoing support for embedded systems software to meet technological and customer requirements
• Define and analyze system software design requirements and write software requirements documents to meet defined and anticipated customer needs and system quality and performance standards
• Write software integration and test plans; conduct and lead software verification, testing and integration efforts to identify required modifications and ensure optimum system performance at delivery
• Collaborate with electrical engineers in planning, design and development of systems to ensure software and hardware performance and compatibility
• Develop interface definitions in conjunction with design team and enforce interface control documents to record and validate system performance standards and results
• Lead and participate in software Design Reviews to ensure team progress against milestones are met and to maintain highest quality level within project schedules
• Serve as technical lead on projects as assigned, working with customers to meet deliverables and address and resolve technology or system issues
• Must demonstrate the ability to maintain professional demeanor at all times and under all circumstances;
• Effectively manage multiple priorities and deadlines; exceptional interpersonal, written, and verbal communication skills;
• Strong customer service, quality, and team orientation; organizational skills and detail focus;
• Self motivation, self direction, and able to work independently; and a commitment to continuous improvement of knowledge, skills and abilities

Required skills/Experience for Embedded UAV Controls Software Engineer
• 4 year degree in an applicable STEM field REQUIRED
• MINIMUM of 3-4 years of experience in embedded software development
• Real Time Embedded Software, C/C++
• Windows Forms, GUI development, C#
• DO-178B Requirements/Development/Test
• OMAP/ARM/PowerPC
• Embedded Linux/GCC/GDB
• GreenHills Integrity and MULTI, uCOS, VectorCast C
• Control Systems/Inertial Navigation Systems/Engine Control
• Interfaces - Serial/CANBus/Ethernet/I2C
• ClearCase/ClearQuest
 
Job Number: 52875
Job Location: Sterling, VA
Rate: open
Per Diem: possible
Overtime: possible
Duration: 12+ months
Start Date: asap
Input Date: 12/07/2017
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Arun
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer 3

Description:
Engineer 3

Location: Savannah, GA
Pay Rate: $58/hr - $60/hr
Duration: Long Term Contract
Shift: Not specified

Unique Skills:
-The ideal candidate will perform cabin configuration engineering and will have a background in electro-mechanical design and/or integration.
-Understanding of aircraft mechanical component integration along with basic electrical integration and application is highly preferred.
-Position will generate build list configuration and certification strategy for a complete aircraft cabin interior installation.
-Knowledge of business jet cabin interiors is highly desired.

Education and Experience Requirements:
Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Five (5) yrs in specific technical discipline or ten (10) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

Principle Duties and Responsibilities/Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering related field preferred. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 8162
Job Location: Savannah, GA
Rate: 58-60
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 03/07/2018
Last Updated: 03/14/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Aides (Internship) - Santa Barbara, CA

Description:
STS AeroStaff Services now offers Engineering Aide jobs in Santa Barbara, California. This is a part time internship for a CURRENT student whose GPA is at least 3.0 or higher.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Overview:

Seeking a talented engineering intern with electrical, electronic engineering, or integrated circuit design training or experience to help advance the state-of-the art in infrared and visible sensors.

Job Duties:

• The selected candidate will contribute as part of a design team creating advanced infrared cameras and imaging systems
• Technology areas of interest include integrated circuit CMOS design, software development and programming in C, C++, and MATLAB, systems engineering, electrical engineering, analog and digital circuit design, RF design, integrated circuit design, and/or infrared optics and radiometry

Qualifications:

• Must be a CURRENT student with a GPA of 3.0 or higher

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 40745
Job Location: Santa Barbara, CA
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 11/29/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
FAST Technician Sr.

Description:
FAST Technician Sr.
Denver, CO
Rate: DOE


Unique Skills:

*** This person will be station in the Denver, Colorado area *** Must be able to pass a DOT medical exam and meet all of the qualifications to operate large vehicles.FAA A & P Certificate, FCC license, or NCAT certification required. Valid Driver's License required. Ability to obtain Passport as international travel is a requirement. Must be available on an on-call basis 24 hours a day 7 days a week, with the ability to be on site or dispatched on the FAST aircraft or vehicle within two hours of the initial contact from Company. Must be able to communicate effectively with the customer, scheduling, FAST flight crews, Tech Ops, business office, vendors, Warranty, Field Service Reps and Hangar Ops. Performs required AOG maintenance and necessary servicing of all aircraft mechanical and avionics systems. Must demonstrate the ability to work independently and consistently to perform assigned maintenance and avionics tasks within the quoted or standard CMP time with little or no supervision.


Education and Experience Requirements:

HS diploma/GED. FAA A & P Certificate, FCC license, or NCAT certification required. Valid Drivers License required. Ability to obtain Passport. 8 years combined experience in inspection, maintenance or servicing of large/mid-size acft to include 2 years experience on Company acft.

Position Purpose:

Independently performs a variety of aircraft modifications and maintenance functions on AOG aircraft on road trips and in the Product Support org. Duties include adv troubleshooting, removal and installations of airframes, landing gear, engine components, electrical components, control systems and any other maintenance requirements to assure conformance to procedures, performances, and test specs on customer live in-service aircraft. Supports the customer in diagnosing and resolving technical problems with the aircraft.

Principal Duties and Responsibilities:

Essential Functions: 1. Must be available on an on-call basis, with the ability to be on site or dispatched on the FAST aircraft within two hours of the initial contact from Company. Must be able to communicate effectively with the customer, scheduling, FAST flight crews, Tech Ops, business office, vendors, Warranty, Field Service Reps and Hangar Ops. Acts as the single point of contact between Company and the customer to correctly relay the aircraft schedule and return to service expectations. 2. Performs required AOG maintenance and necessary servicing of all aircraft mechanical and avionics systems. Must demonstrate the ability to work independently and consistently to perform assigned maintenance and avionics tasks within the quoted or std CMP time with little or no supervision. 3. Complies with adv troubleshooting techniques for all model aircraft with assistance from Tech Ops. 4. Orders and receives all tooling and matls needed to service the AOG aircraft. Arranges the shipment of all core units and tooling back to Company. 5. Coordinates with the Inspection Dept to ensure compliance with internal and FAA inspection and doc requirements. Acts as the delegated Quality rep when assigned on road trips. Properly completes work order sign-offs, logbook entries, shift turnovers, expense reports and all other paper work in a timely manner. Ensures that all work accomplished meets quality stds and specs. 6. Establishes and maintains a professional working relationship with the customer and provides one-on-one direct familiarization briefings with the customer during the road trip. 7. Properly identifies (tags) customer property and equipment. Stores aircraft components and other customer property securely and safely. 8. Follows SOPs and JSAs/JRAs when operating GSE, such as power supply, hydraulic rigs, nitrogen filler carts, and oxygen service carts. Operates and supervises use of special support equipment used in removal and installations of major components. 9. Coordinates with Line Service and FBO ops to schedule movement of aircraft and assist with movement of aircraft. Also arranges, as needed, for the overhaul or repair of customer property and inspect/operate all interior installations and record discrepancies. 10. Provides regular updates on aircraft status and all customer support activity to Field Service Rep and management.

Additional Functions: 1. Assists in training new employees. 2. Performs other duties as assigned.

Other Requirements: 1. Formal training in the Company product line maintenance procedures and practices preferred to include Flight Safety Maintenance initial training for specific models required to support. 2. Must possess a working knowledge of the company policies and procedures, Repair Station and QC Manual, pertinent process specs, and technical reference matls. 3. Must possess a strong grasp of all aircraft avionics and mechanical systems and how they are related. Must possess the ability and understanding to comply with all system checkouts on an in-service aircraft.
 
Job Number: 8329
Job Location: Denver, CO
Rate: DOE
Per Diem: N/A
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/29/2017
Last Updated: 02/05/2018
Firm Name: INCONEN CORPORATION
Attention: Cathy O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software OR Systems Engineer

Description:
The initial training period for 6 months in Cedar Rapids, then work effort will be brought back to Enea Phoenix Engineering Office if this is more convenient for you. May also choose to stay onsite in Iowa.

FMS engineers (Systems and/or Software Engineers)
Job Requirements:

Significant Avionics FMS or Flight Controls software experience is required

Software experience that can also write Low and Higher Level Requirements and associated tests. Debugging software on target hardware to obtain root cause is also a plus
Undergraduate or Graduate degree in Computer Science, Computer Engineering, Electrical Engineering, or related scientific discipline

Working knowledge of high-order programming languages (C, Ada, C++, Matlab/Simulink, etc.)

Demonstrated teamwork and leadership abilities

Strong communication and presentation skills

Strong object-oriented language (C++, C#, Python, etc.) and software development methodologies (Waterfall, Agile, etc.)

Strong background with GUI a plus!

Embedded software experience is required

Knowledge of DO-178 Development Standards

Enea does not have the ability to sponsor applicants for work visas for this position.
 
Job Number: 398
Job Location: Cedar Rapids, IA
Rate: 55.00
Per Diem: YES
Overtime: YES
Duration: 1 YEAR +
Start Date: August 30
Input Date: 07/26/2018
Firm Name: ENEA SOFTWARE AND SERVICES
Attention: Walt Walonoski
Address: 2555 E CAMELBACK RD STE 280
City, State: PHOENIX, AZ 85016
Phone: 480/753-9200
Fax Phone: 480/753-6400
Website: www.enea.com/services/expertise

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Readiness Technician D

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Flight Readiness Technician D
(U.S. Citizenship Required*)
Palmdale, CA
2017-5053

Join our team as an Aircraft Inspector – Mechanic, Electrical, Electronics, and Mechanic Flight – to perform operational check out of aircraft prior to and during preflight.

Responsibilities:
• Perform activities prior to flight status and final inspection and daily maintenance of completed experimental aircraft or major modification to experimental aircraft.
• Inspect explosive and armament installations. Inspect and/or perform bench and flight line operational checkout and inspect, trouble-shooting, adjustment and repair of electrical and electronic systems. Inspect the calibration, adjustment, troubleshooting, repair and modification of electronic test equipment used exclusively by production and at times may be required to inspect the calibration, adjustment, trouble-shooting, repair and modification of other electronic test equipment as directed.
• Maintain aircraft historical records.
• Perform aircraft and/or spacecraft bench or flight line operational checkout, trouble-shooting, adjustment and repair of any electrical or electronic system.
• Fabricate, adjust, trouble shoot, repair and modify electronic test equipment.
• Modify parts such as skins, doors, aircraft frames, test panels, clips, brackets, angles and ribs without the aid of jigs and fixtures. Modify aircraft components or aircraft support equipment.
• Perform operational checkout, including diagnosing and correcting malfunctions, of hydraulic systems and mechanical systems.
• Operate engines during run-ups and troubleshoot when needed. Perform engine buildup as assigned.
• Install, repair, and replace tanks, power plants, generators, and aircraft engines. Install or replace reservoirs, etc. and repair leaks in same. Install or replace instruments such as fuel quantity, rate of climb and oil pressure indicators. Install and load ejection seats and guns. Install adjust, repair and replace structural parts and assemblies.
• Splice, route, clamp, solder, and string tie wires or wire bundles.
• Repair, install and hook up bomb, missile and rocket racks and pylons.
• Perform composite repairs

Qualification:
• Required – Active Secret Clearance with the ability to obtain a Top Secret.
• Knowledgeable and skilled in F15 mechanical, structural, power plant, hydraulic, pneumatic, and electrical systems operation and flightline methods and common shop practices.
• Knowledgeable and able to interpret and work from USAF technical orders (T.O.s), blueprints, sketches and written and verbal instructions.
• Proficient using computer systems for office and shop applications.
• Knowledgeable about and able to work in FOD controlled environments.
• Knowledgeable and able to apply shop math.
• Skilled in listening and interpersonal participation, and able to work with others as part of a team which includes giving and receiving feedback, and assisting others in completion of tasks.
• Able to complete and maintain all required training and certifications needed to do job efficiently.
• Able to climb, stand, bend, kneel, reach, crawl, and walk on or around aircraft or work stands and in confined spaces.
• F-15 Crew Chief experienced personnel, sound understanding of Air Force Tech Order usage and application. Experienced Flight Line operations, preflight, launch, recovery, and functional checkout of Hydraulics/Avionics/Mission Systems/Weapons loading.
• F-15 Electrical/Avionics experience, sound understanding of Air Force Tech Order usage and application. Versed in Flight Line Operations, Avionics/Electrical preflight and functional checkout of disturbed systems
• Weapons Load Standardization/Weapons loading: Plans, organizes, participate and directs aircraft armament systems maintenance activities. Establishes and evaluates performance and training standards, maintenance controls, and procedures. Checks methods and techniques used to load and unload munitions on aircraft, to repair and maintain aircraft release and gun systems, and to maintain, repair, and modify associated equipment.

*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Required – specialized vocational training or an Associate's degree and 3 to 5 years work related F15 experience or an equivalent combination of education and experience

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!



APPLY ONLINE HERE: https://careers-moseleytechnical.icims.com/jobs/5053/flight-readiness-technician-d/job?mode=view
 
Job Number: 2017-5053
Job Location: Palmdale, CA
Duration: 12 Months
Input Date: 12/01/2017
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: https://careers-moseleytechnical.icims.com/jobs/5053/flight-readiness-technician-d/job?mode=view
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Design

Description:
The Engineer, Flight Test position is responsible for the design, development, and coordination equipment to support Flight Test operations.

Duties and Responsibilities:
1. Designs, develops, coordinates, equipment, and Installations, to support Flight Test operations. Typical equipment and installations including ballast, data booms, cockpit displays, antennas, racks, and various transducers (acceleration, pressure, temperature, displacement, etc.).
2. Applies principles of chemistry, physics, and material behavior to develop metallic, non-metallic and composite material and processing specifications, fabrication and assembly processes. Applies material properties and design allowables, processing processes and quality engineering specifications.
3. Designs structural products and components of products, as well as Systems level integration, evaluates alternatives including cost and risk, supportability and analyses for total systems. Analyses are performed at all levels of total system to include: concept, design, fabrication, installation, and operation.
4. Examines engineering drawings and related documents for soundness, efficiency, and simplicity in design; completeness, clarity, and dimensional accuracy; correctness of materials and processes; conformity to design/drafting standards, design specifications, and practicability; and economy of fabrication, assembly, and installation.
5. Supports fabrication and installation of test equipment.
6. Resolves all issues related to design, documentation, procurement, fabrication, and installation.
Education, Work Experience, Certification and/or Licensure:
1. Bachelors’ degree in Aerospace Engineering, Electrical Engineering, Engineering Technology other related field preferred.
2. 5 years’ experience in aerospace design and testing.
Knowledge, Skills and Abilities:
1. Proficient in 3D multiple component designs and 2D fully dimensional and tolerance drawings. CATIA V5, PLM systems, TeamCenter strongly preferred.
2. Strong Microsoft Office Suites (Word, Excel, and PowerPoint) strongly preferred.
3. Strong computer operating systems skills.
4. Excellent oral and written communication skills.
5. Excellent interpersonal skills.
6. Experience with aircraft data acquisition systems.
7. Experience with FAA regulations.
8. Excellent analytical skills.
 
Job Number: 28-017
Job Location: Greensboro, NC
Rate: $35-$50
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 11/13/2017
Last Updated: 12/18/2017
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Engineer

Description:
Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM’s. Located in Seattle, they are a small but rapidly growing company in Seattle, WA. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants.

We are seeking full-time and contract Flight Test Engineers to join us in Moses Lake, WA. The ideal candidate will possess experimental flight test operational experience in either STC or Type Cert Programs. The individual in this position will be involved in a range of airplane flight test operations.

Essential Functions:
Coordinate test and certification requirements.
Author flight test and ground test plans including test hazard analysis.
Author instrumentation specifications, wire diagrams, FTEO packages, and calibration documentation.
Support instrumentation installation as required.
Support ground operations, including weight and balance activities, fuel management, pre-flight and post-flight tasks and briefings.
Support flight and ground test conduct and data collection.
Analyze test data and evaluate compliance with regulations.
Prepare certification test reports.
Domestic and occasional international travel is required.
Desired Qualifications:

5+ years relevant work experience related to experimental flight test operations. Experience in all of the above activities is not critical.
Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.
Ability to think critically, identify and synthesize important information necessary to inform client deliverables.
Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
Demonstrates personal accountability, initiative and versatility on a consistent basis with minimal guidance.
Proficient in working with Microsoft Office applications including Word, Excel, and PowerPoint. Ability to quickly learn to operate new software.
Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
 
Job Location: Moses Lake, WA
Per Diem: possible
Overtime: Yes
Duration: LT
Start Date: asap
Input Date: 11/30/2017
Last Updated: 12/07/2017
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Instrumentation Technician

Description:
This individual in this position will work with engineers to design and install instrumentation to support the collection of flight test data. The ideal candidate is self-motivated, detail oriented, and knowledgeable on instrumentation theory.
Responsibilities:
� Reading and creating wire diagrams.
� Selecting or auditing appropriate sensors given engineering requirements.
� Working with customers and engineers to define appropriate instrumentation requirements.
� Designing instrument installations and creating installation instructions.
� Instrumentation installation.
� Evaluating instrumentation installations for function and safety.
� Troubleshooting instrumentation problems.
� Data acquisition system operation.
� Documenting data system practices and procedures.
� Generating instructions and operation manuals.
� Developing sensor calibration and functional test procedures.
� Maintaining calibration records.
� Domestic and international travel may be required.
Desired Qualifications:

� 3+ years instrumentation experience in a testing environment. Aircraft flight test preferred.
� Demonstrates personal accountability, initiative and versatility on a consistent basis with minimal guidance.
� Ability to work interdependently, and lead small groups.
� CATIA V experience beneficial.
� Experience with data processing and analysis beneficial.
� Computer programming experience beneficial.
� Proficient in working with Microsoft Office applications including Word and Excel.
If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers. Please feel free to forward this email to others who might be interested.

Candidates must have legal authorization to work in the United States, Canada or Mexico
 
Job Location: Moses Lake, WA
Per Diem: possible
Overtime: possible
Duration: LT
Start Date: asap
Input Date: 12/28/2017
Last Updated: 01/23/2018
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
GNC Aerospace Engineer ( Gilbert, AZ ) 6954262

Description:
GNC Aerospace Engineer ( Gilbert, AZ ) 6954262
12+ Month Contract


Perform requirements management, vendor technical monitoring and guidance, and I&T activities for Guidance Navigation and Control (GNC) spacecraft component hardware. This includes analyzing system requirements to perform hardware component selection, developing component hardware Statement of Work (SOW), analyzing, allocating and decomposing higher level spacecraft requirements to their respective GNC components, monitoring component vendor’s development activities per the SOW and developing test procedures and automated tests of the GNC hardware to verify requirements, support spacecraft I&T activities, perform detailed spacecraft simulations using in house simulation tools, and analyze data to develop performance and functional data reports to support requirements.

Looking for satellite experience, launch vehicle, UAV and aircraft is acceptable if their related experience is with GNC hardware component. Without the GNC hardware component experience that’s a show stopper for the candidate. 5 – 8 years of experience is good

Required Capability:
Must have hardware electrical Perl background.
Additional Capability: Knowledge of Matlab & Simulink is a plus.
 
Job Number: 6954262
Job Location: Gilbert, AZ
Rate: open
Per Diem: Split
Overtime: Yes
Duration: 12 month
Start Date: ASAP
Input Date: 01/19/2018
Firm Name: TALENTPRO CONSULTING
Attention: Tim
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X101
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
General Repair Technician B

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

General Repair Technician B
(U.S. Citizenship Required*)
Universal City, TX
2017-5057

Responsibilities:
• Maintains a limited number of systems by removing, replacing, repairing or upgrading components.
• Troubleshoots problems to isolate faulty components.
• Conducts routine functional tests by operating equipment and using appropriate test equipment.
• Performs a variety of visual inspections as required by equipment maintenance documents.
• Documents maintenance and inspection actions as required.
• Works under general supervision.

Qualification:
• Proficient knowledge of electrical technology and schematics
• Able to support up to 10% travel

*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• High school diploma or GED and typically 1 or more years’ related experience or an equivalent combination of education and experience.
• Experience with manufacturing wiring bundles and electrical cables is highly desired.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!



APPLY ONLINE HERE: https://careers-moseleytechnical.icims.com/jobs/5057/general-repair-technician-b/job?mode=view
 
Job Number: 2017-5057
Job Location: Universal City, TX
Duration: 12 Months
Input Date: 12/01/2017
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: https://careers-moseleytechnical.icims.com/jobs/5057/general-repair-technician-b/job?mode=view
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Instrument Project Engineer - Refinery Exp (TX)

Description:
THIS IS NOT FOR AN INTERN, THIS POSITION REQUIRES AT LEAST 10-15 YEARS OF EXPERIENCE.

Basic Function
An Instrument Project Engineer (IE) is responsible for the design and implementation of process instrumentation from initial conception through field installation. They are responsible for designs that provide the most reliable and cost-effective instrument systems. In addition, the IE provides consulting services to process designers in developing process design specifications, develops operating and training manuals for mechanical and process personnel and participates in training operating personnel.

An IE:
• Writes purchase and construction specifications and writes and performs Factory Acceptance Tests.
• Uses vendor software programs for sizing safety and control valves.
• Specifies, procures, and configures Programmable Logic Controllers (PLC) and field hardware such as transmitters, controllers, pneumatic and electronic transmission system.
• Utilizes standards and best practices from American Petroleum Institute (API) and International Society of Automation (ISA), National Fire Protection Association (NFPA) to perform the above functions.

Responsibilities.
The Instrument and Controls Engineer may be responsible for:
• Function as project engineer on instrumentation and capital projects and large maintenance projects.
• Taking lead role on Instrumentation and controls capital projects including PLCs.
• Help identify areas where instrumentation/controls can improve plant operations and profitability.
• Developing capital and expense budget requirements related to instrumentation system upgrades, PM/PdM programs, repairs, expansions, etc.
• Serving as a technical resource to properly identify new and existing equipment specifications and proper operating parameters/ranges for instrumentation equipment.
• Overseeing application and interpretation of National Electric Code and other applicable city, state, federal codes and standards (e.g. NPRA, NFPA, API, ISA).
• Interact with Engineering and Construction contractors, both on-site and off-site.
• Leverage the application of instrumentation safety standards, mechanical integrity, design and maintenance.
• Using documentation systems and processes that maintain accurate instrumentation information and drawings.
• Support criticality assessments of the plant's instrumentation equipment.
• Design and evaluate Refinery Safety Instrumented Systems (SIS). Perform Safety Integrity Level (SIL) analysis and engineering upgrades of safety instrumented systems.

Basic Required Qualifications.
• Must be legally authorized to work in the United States, at least 18 years of age and possess a valid driver’s license.
• Must possess a bachelor’s degree in Electrical Engineering, Chemical Engineering, Mechanical Engineering, or Industrial Engineering.
• Must have three or more years of instrumentation experience and three or more years of direct experience in a refinery, chemical and/or manufacturing industry.
• Demonstrated knowledge and use of SPI (InTools) database and specifications.
• Proficient in the specification, troubleshooting, maintenance and overhaul of process control values.
• Demonstrated knowledge of PLC's.
• Proficient in MS office (Word, Excel, Outlook, Projects).
• Must be willing and able to perform, comply with the following:
• Wear Nomex fire retardant clothing and personal protective equipment (such as steel-toe shoes, ear, and eye protection).
• Maintain face daily so that a respirator/face mask can seal properly (some examples include being free of facial hair and/or clean shaven), climb up to 200 feet in height and work in enclosed spaces such as tanks and silos

Preferred Qualifications:
• Industry certifications (ISA)

FOSTER DESIGN'S BENEFITS:
• Working for a 54-year old company
• Minimum 10 Paid Holidays with no waiting period
• Immediate 401K participation, 1 year 100% vesting schedule, matching employer contribution
• Free Financial Consultant
• Medical/Dental/Vision/Prescription card – BCBS
• MetLife – Long Term Disability Insurance
• Vacation Pay
• Per Diem Assignment Allowance, when applicable
• Per Diem Split, when applicable
• Paid Weekly (Direct Deposit)
 
Job Number: FD-021618TX
Job Location: Borger, TX
Rate: $BOE/HR
Per Diem: Possible
Overtime: Possible
Duration: 11 Months or linger
Start Date: 03/26/2018
Input Date: 03/08/2018
Last Updated: 03/21/2018
Firm Name: FOSTER DESIGN INC
Attention: Recruiter
Address: 200 W DOUGLAS AVE STE 110
City, State: WICHITA, KS 67202
Phone: 316/832-9700
800 Phone: 800/345-3394
Fax Phone: 316/832-9357
Website: www.fosterdes.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Integration and Test Engineer - Level 2

Description:
Integration and Test Engineer - Level 2 (ACTIVE DoD SECRET CLEARANCE REQUIRED)

Location: Moorestown, NJ
Pay Rate: DOE ($47/hr - $57.50/hr)
Duration: 1 year W2 contract
Shift: First, 9/80, exempt OT
Travel: Yes, to be determined
**MUST be a U.S. CITIZEN**
**MUST have an ACTIVE DoD SECRET CLEARANCE – INTERIM SECRET CLEARANCE is SUFFICIENT**

Description
The candidate will perform the unit level test, engineering integration and test, engineering test & evaluation and support system level testing of COTS or custom computing hardware and real-time embedded signal processing firmware/software applications.
This engineer will be responsible for performing software/firmware development assignments from requirements through final testing.
This engineer will work with domain experts and military documentation to develop test software requirements, procedures, code and execute the tests.
This candidate will be responsible for designing and implementing system components using Object Oriented methods in C++.
This candidate should have an academic background and experience in: digital signal processing implementation, C/C++ programming, and simulation tools such as MATLAB.
The candidate must have excellent organizational skills, interpersonal skills and be able to communicate at both programmatic and technical levels with subordinates, peers, senior management levels and the customer.

Skill/Experience/Education (Mandatory):
ACTIVE DoD SECRET CLEARANCE
BS Degree in Electrical Engineering or Electrical and Computer Engineering.
Minimum of 8 years of professional level experience testing hardware subassemblies, nests, cabinets and systems for functional and performance requirements.
Experience in testing digital signal processing hardware and real-time software applications using C++ Object Oriented design and programming.
Configuration management and change management experience using ClearCase, ClearQuest and UCM.

Desired:
Simulation tools experience such as Matlab.
 
Job Number: 8327
Job Location: Moorestown, NJ
Rate: 47-57.50
Per Diem: Split Possible
Overtime: Exempt
Duration: 1 year
Start Date: ASAP
Input Date: 02/20/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MM-System Engineering DMSMS–Grade 04

Description:
EDUCATION
BS, Electrical/Mechanical Engineering
MS, Electrical/Mechanical Engineering

Experience as design/ component engineer with semiconductor industry, an electrical component engineer with an Avionics OEM (Original Equipment Manufacturer), or as a DMSMS (Diminishing Manufacturing Sources and Material Shortages)/Obsolescence Technical Engineer.

Provide design guidance to engineering/suppliers for use of preferred parts to minimize impact from DMSMS

Review new designs and propose replacement options for both electrical and mechanical component selections based on cost, volume, DMSMS, reliability, quality and availability.
Interface with equipment manufacturers and LRU suppliers to clarify parts support, availability and recommended resolutions.

Manage component lifecycle and Bill of Material grading through DMSMS forecast tool [e.g. Silicon Expert, IHS, Q-Star, etc.] to identify, forecast, and resolve obsolete component issues.
Investigate and close DMSMS issues from engineering, production, and/or fielded parts.
Identify and analyze critical parts and recommend resolutions for proactive monitoring efforts.

Develop processes and lead working group meetings to track status and action items for a given design or manufacturing issues regarding; DMSMS, failure analysis, corrective actions, and root cause analysis.
Measure and track internal metrics to ensure DMSMS processes are being followed and implemented.
 
Job Number: 17-699-1616
Job Location: Northeast
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 01/29/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Machinery Designer

Description:
Designs components or portions of systems and modifies existing designs to develop or improve products and facilitate manufacturing operations. Utilizes computer-aided design equipment and/or graphic tools such as, CAD, CAM or CATIA. Gathers information, makes studies, computes calculations, and prepares original rough layouts, sketches to present design proposal. Coordinates design criteria with engineering, manufacturing, tooling, material, and planning group such as ease of manufacture, availability of materials, and contractual specifications. Exclude classifications in which incumbents predominantly perform drafting assignments.
This position may be filled from the entry level to the senior level of the job family. The position requires an Associate's degree in drafting/engineering technology or equivalent drafting experience, plus one year or more years of drafting/design experience preferred. Naval design experience is desirable.
A candidate must have a thorough knowledge of accepted design/drafting methods and concepts, and be familiar with basic engineering and design principles relating to machinery design work. The candidate for this position should be proficient in the use of 2D and 3D drafting software tools such as AutoCAD, Inventor and/or Siemens NX and have familiarity with Naval Machinery design in one or more of the following technical areas, including structural closures, Capstans, elevators, winches, hoists, hydraulics, arresting gear or other heavy mechanical components. Prior Aircraft Carrier Design experience is a plus.
Candidates must have experience with 2D and 3D CAD, Electrical Wire way designs, equipment arrangement layouts and/or cable routing experience.
 
Job Number: 7864214
Job Location: Newport News, VA
Rate: open
Per Diem: possible
Overtime: possible
Duration: 1 year
Start Date: 1/2/2018
Input Date: 11/24/2017
Firm Name: TASC TECHNICAL SERVICES
Attention: Stephen
Address: 73 NEWTON RD
P O BOX 1315

City, State: PLAISTOW, NH 03865
Phone: 603/382-1114
Fax Phone: 603/382-2377
Website: www.tasctech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer (PWA and LRU Assembly) CA

Description:
13701

Title TEMP Staff Manufacturing Engineer (PWA and LRU Assembly)
Job Summary General Atomics Aeronautical Systems, Inc. (GA-ASI), an affiliate of General Atomics, is a world leader in proven, reliable remotely piloted aircraft and tactical reconnaissance radars, as well as advanced high-resolution surveillance systems.

We recognize and appreciate the value and contributions of individuals with diverse backgrounds and experiences and welcome all qualified individuals to apply.

Support the design (DFM), first article, production, test, and system integration of Printed Wiring Assemblies and Line Replaceable Units for all UAV platforms including Ground Control Stations (GCS). Assemblies will include surface mount as well as through hole technology and mechanical assembly.

Duties and Responsibilities •Responsible for manufacturing process development, implementation, and continuous improvement to enhance Quality / Yield, reduce Cost, and improve Productivity / Schedule. Initiate and lead lean manufacturing process improvement projects.
•Specify and implement automation equipment and processes.
•Identify and assist in addressing safety issues on the manufacturing floor.
•Support manufacturing production planning and coordination, execution and operations process development.
•Provide production support to assemblers and leads.
•Document manufacturing processes and assembly work instructions in conjunction with T&O Planning.
•Design shop aids and tooling to assist production.
•Disposition non-conforming parts, identify root cause, and implement corrective and/or preventive action to reduce scrap and rework.
•Collaborate with Design Engineering during prototype, development and first article manufacturing.
•Expertise in assembly methods and processes, including surface mount technology, through hole technology, mechanical assembly, and testing. Experience in both analog and digital technologies as well as a background with RF.
•Experience with development and deployment of manufacturing automation and remaining current with technology.
•Experience with Electrical Schematics and Circuit Diagrams; Drawings and BOMs; Assembly Instructions; Engineering Change systems; Quality systems for non-conforming parts and corrective action. Experience with Lean Manufacturing methodologies for waste reduction, e.g.: 5S, Standard Work, TAKT, Pull System, 5S, Value Stream Mapping, cell design, and manufacturing flow.
•Clearly and effectively communicate both verbally and in written form to both technical and non-technical audiences, especially regarding manufacturing processes, engineering issues and proposed changes, and quality issues and dispositions.

Qualifications Essential Qualifications Typically requires a bachelors degree, masters degree or PhD in engineering or a related technical discipline from an accredited institution and progressive engineering experience as follows; nine or more years of experience with a bachelors degree, seven or more years of experience with a masters degree, or four or more years with a PhD. May substitute equivalent engineering experience in lieu of education. Demonstrates an extensive technical expertise and application of engineering principles, concepts, theory, and practice with the ability to organize, plan, schedule, conduct, and coordinate workloads to meet established deadlines or milestones with some experience in project leadership. Must possess the ability to understand new concepts quickly and apply them accurately throughout an evolving environment. Strong communication, presentation, and interpersonal skills are required enabling an effective interface with other departments and/or professionals, and capable of representing the organization as a prime technical contact, as well as providing leadership and guidance to less experienced professionals. Customer focused, formulates plans based on the development of innovative new designs in resolving advanced technical engineering problems. Must be able to work both independently and in a team environment. Able to work extended hours as required. A Professional Engineering License, original work(s) published in professional engineering journals, and invited to present one or more original works to an engineering symposium are desirable.
Additional Qualifications Typically requires a bachelors degree, masters degree or PhD in engineering or a related technical discipline from an accredited institution and progressive engineering experience as follows; four or more years of experience with a bachelors degree or two or more years of experience with a masters degree.
•Experience with IPC & MIL standards, including: IPC/WHMA-A-610 and 620 , J-STD-001 – Requirements for Soldered Electrical and Electronic Assemblies, MIL-STD-1553 – Digital Time Division Command/Response Multiplex Data Bus, MIL-STD-1760 – Aircraft Electrical Interconnection System, SAE-AS39029 (MIL-C-39029)– Experience implementing capital equipment in factory environment.
•Experience with MRP systems, eg SAP or MTO/WDS. Experience with Microsoft Office Project and Visio.
•Experience with programming.
•Experience with databases, e.g. Oracle and FileMaker. Knowledge of SQL.
•Experience with process mapping and demand flow technology
•Strong background in electro-mechanical assemblies.
•Six Sigma Green Belt
City San Diego
State California
Travel Percentage Required 0% - 25%
Clearance Required? No
Work Schedule Rule 9/80
Temp Assignment Duration (# of Days) 180
 
Job Number: JE-13701
Job Location: San Diego, CA
Duration: 6 month contract
Input Date: 03/05/2018
Last Updated: 03/12/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer - Level 1

Description:
Location: Lexington, KY
Rate: $20.00 - $35.00/HR
Duration: 1 year contract

**MUST be a U.S. Citizen**
**MUST have an Active Secret Clearance or to have had one with the last two (2) years**

Job Description:
- Designs manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, machining and material handling.
- Designs arrangement of machines within plant facilities to ensure most efficient and productive layout.
- Designs sequence of operations and specifies procedures for the fabrication of tools and equipment and other functions that affect product performance.
- Adapts machine or equipment design to factory and production conditions.
- May incorporate inspection and test requirements into the production plan.
- Inspects performance of machinery, equipment, and tools to verify their efficiency, and investigates and initiates corrective action of problems and deficiencies to ensure product quality.
- Develops manufacturing processes that are applicable to statistical process control, and may develop those techniques.
- Provides guidance to engineering regarding design concepts and specification requirements to best utilize equipment and manufacturing techniques.
- Ensures processes and procedures are in compliance with regulations.

Skill/Experience/Education
Mandatory:
- Mechanical, Electrical, Aerospace Engineering Degree.
- 1st, 2nd or 3rd shift schedules may be required.
- On-aircraft and off operations.
- In this role, the employee will review mechanical designs for ease of manufacturing and work closely with design engineering for improvements.
- The employee will use their knowledge of interpreting and reading engineering design drawings to develop fabrication routers/work instructions.
- This role will also require the employee to develop bill of materials (BOMs) based on drawing parts lists.
- The employee will work with manufacturing on issues and process improvements.
- Active Secret Security Clearance within the last 2 years.

Desired:
- Job scope experience
- Team Center Engineering experience
- Production Engineering experience
- Production Operations experience
- Mechanical Experience
- Electrical Experience
- Lean Six Sigma practices SOF CLSS contract, facility, and customer knowledge
- Ability to read and interpret engineering drawings
- Excellent verbal and written communications skills
 
Job Number: 7709
Job Location: Lexington, KY
Rate: $20.00 - $35.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 08/02/2017
Last Updated: 02/14/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II - (FL)

Description:
SEVERAL OPENINGS IN THE JACKSONVILLE, FL AREA

Interim Secret NOT REQUIRED to start. US Citizen only.

Assists in the development and implementation of production planning and tooling methodologies. Participates as a member of an Integrated Product Team (IPT) in the integration of technical solutions. Works with others to develop, identify and implement conceptual designs and maintenance of the program architecture for build. Assists in implementing manufacturing plans and bill of materials. Resolves technical problems and assists in the implementation of new engineering principles, theories, advanced technologies and concepts. Assists in the implementation of Lean principles and technologies. Interfaces with professional associations, suppliers, IPTs and internal customers to develop products, skills, knowledge and experience.

Prefer Experience in post-production electrical routing and terminations; creation of graphic aids from model based definition; experience in HMS-CAPP and TeamCenter. Working with Design Engineering, Manufacturing Engineering/Planning, Quality Engineering, Liaison Engineering, Industrial Engineering and Operations to resolve Work Instruction and Design constraints.

Bachelor's degree and typically 2 or more years' experience in an engineering classification or a Master's degree with experience in an engineering classification. Required: Bachelor or Master degree from an accredited course of study, in engineering
 
Job Number: MFGEIIfl
Job Location: Jacksonville, FL
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 4+ Months
Start Date: ASAP
Input Date: 11/07/2017
Last Updated: 12/08/2017
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Planner 3

Description:
Manufacturing Planner 3-Electrical/Electronic
9 months
Develops, implements and maintains various manufacturing plans, Bill of Materials, work instructions and illustrations to define and document as-built configuration. Develops manufacturing concepts and strategies to support business objectives. Develops and integrates suppliers, processes, materials, data and technology to meet manufacturing and delivery requirements. Reviews and approves supplier data to ensure manufacturing related requirements are met. Develops tooling requirements based on manufacturing and engineering requirements. Manages tools from initial design to end of use disposition. Investigates and resolves manufacturing related issues. Performs producibility assessments for part or product designs. Provides producibility input to design, manufacturing processes and manufacturing technologies to meet cost and schedules. Develops integrated work statements and sequencing of events to support delivery commitments. Drafts, updates and reviews processes and procedures to support business and regulatory agency requirements. Works under general direction.
 
Job Number: 17-27023
Job Location: Everett, WA
Per Diem: Split
Overtime: possible
Duration: 9 months
Start Date: 1/8/18
Input Date: 11/27/2017
Firm Name: ICONMA LLC
Attention: Constance Whitcomb
Address: 4620 E 53RD ST
City, State: DAVENPORT, IA 52807
Phone: 312/502-4795
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Planner 4

Description:
Manufacturing Planner 4 - Electrical/Electronic
9 months

Plans and leads department/organization processes for developing, implementing and maintaining various manufacturing plans, Bill of Materials, work instructions and illustrations to define and document as-built configuration. Develops and plans manufacturing concepts and strategies to support business objectives. Prepares build analyses and cost estimate reports. Leads integration of complex suppliers, processes, materials, data and technology to meet manufacturing and delivery requirements. Participates in source selection to ensure manufacturing requirements are met. Develops complex tooling requirements based on manufacturing and engineering requirements. Manages tooling from initial design to end of use disposition. Leads investigation and resolution of complex or systemic manufacturing related issues. Leads teams performing producibility assessments of design concepts. Supports enterprise level benchmarking to incorporate best practices. Leads development of complex work statements and sequencing of events to support delivery commitments. Develops scheduling templates for use by others. Drafts, updates and reviews processes and procedures to support business and regulatory agency requirements. Develops and documents new job practices, techniques and standards. Works under minimal direction.
 
Job Number: 17-27024
Job Location: Everett, WA
Per Diem: Split
Overtime: possible
Duration: 9 months
Start Date: 1/8/18
Input Date: 11/27/2017
Firm Name: ICONMA LLC
Attention: Constance Whitcomb
Address: 4620 E 53RD ST
City, State: DAVENPORT, IA 52807
Phone: 312/502-4795
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Planner 4 Electrical/Electronics

Description:
Seeking 5 Manufacturing Planners for openings in Everett, WA.

RESPONSIBILITIES:
Plans and leads department/organization processes for developing, implementing and maintaining various manufacturing plans, Bill of Materials, work instructions and illustrations to define and document as-built configuration. Develops and plans manufacturing concepts and strategies to support business objectives. Prepares build analyses and cost estimate reports. Leads integration of complex suppliers, processes, materials, data and technology to meet manufacturing and delivery requirements. Participates in source selection to ensure manufacturing requirements are met. Develops complex tooling requirements based on manufacturing and engineering requirements. Manages tooling from initial design to end of use disposition. Leads investigation and resolution of complex or systemic manufacturing related issues. Leads teams performing producibility assessments of design concepts. Supports enterprise level benchmarking to incorporate best practices. Leads development of complex work statements and sequencing of events to support delivery commitments. Develops scheduling templates for use by others. Drafts, updates and reviews processes and procedures to support business and regulatory agency requirements. Develops and documents new job practices, techniques and standards. Works under minimal direction.

EDUCAITON:
Accredited AA degree in related discipline and typically 6 or more years of related experience or an equivalent combination of education and experience.

FULL TIME/
WORK HOURS:
 
Job Number: 166519
Job Location: Everett, WA
Rate: $49.35 - $54.80
Per Diem: Yes
Overtime: Yes
Duration: 9 mths
Start Date: ASAP
Input Date: 11/30/2017
Firm Name: CHIPTON ROSS
Attention: Melody Mullins
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Planner III & IV - Electrical/Electronics - (WA)

Description:
SEVERAL OPENINGS IN THE EVERETT & RENTON, WA AREAS.

Manufacturing Planners with Electrical/Electronics experience.

- Develop, implement and maintain various manufacturing plans, Bill of Materials, work instructions and illustrations to define and document as-built configuration.
- Assist with development and integration of suppliers, processes, materials, data and technology to meet manufacturing and delivery requirements.
- Assist in reviewing supplier data to ensure manufacturing related requirements are met.
- Identifies tooling requirements and initiates tooling orders based on manufacturing and engineering requirements.
- Assist in tooling dispositions.
- Investigate and resolve manufacturing related issues of limited scope.
- Assist with producibility assessments for part or product designs.
- Assist in providing input to design, manufacturing processes and manufacturing technologies to meet cost and schedules.
- Develop work statements and sequencing of events to support delivery commitments.
- Assist in the review, maintenance and monitoring of internal documents.
- Provide ship side support, research and shop assistance

Preferred Qualifications:

- Basic understanding of wiring and wire routing
- - Experience with wire bundle fabrication concepts, wire installation, electrical equipment installation and installation of wiring provisions.
Experience in Teamcenter
- Experience using Manufacturing Execution Systems (CMES)
- WIRS: Wires Information Release System
- CAPP II

AA degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience.

ACS Group (formerly 'Comforce')
 
Job Number: MPEEwa
Job Location: Renton & Everett, WA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 9+ Months
Start Date: ASAP
Input Date: 05/16/2018
Last Updated: 06/15/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

Mechanic

Description:
Perform maintenance in support of manufacturing facility on a variety of equipment throughout facility including machinery repairs, preventative maintenance, machine relocation, fabrication, welding, electrical repair and installation, plumbing (air, hydraulic, water) with use of a variety of equipment.  Responsible for monitoring hazardous waste for removal, maintenance of chemical storage area and clean up of chemical spills as required.  Nontoxic or non-hazardous.  Mainly Soap and/or grease
Will be operating a crane or fork lift.
 
Responsibilities:
Provide maintenance support in all areas of manufacturing facility including but not limited to machinery repairs, preventative maintenance, machine relocation, fabrication, welding, electrical repair and installation, plumbing (air, hydraulic, water) with use of a variety of equipment such as hand tools, welding equipment, fork lifts, and precision measuring equipment.  Maintain and develop preventative maintenance program for production related equipment.  Required to perform work in compliance to all safety and EHS policies and procedures. 
 
Qualifications:
  • Knowledge of EHS procedures and policies
  • Knowledge and safe use of production related equipment
  • Working knowledge and use of welding, electrical, and plumbing equipment including repair and maintenance of machinery
  • Millwright Skills and familiar with Electrical and/or Hydraulic
  • Able to interpret OEM handbooks and/or plant diagrams
  • Understanding of reading building plans and electrical schematics
  • Ability to use trouble-shooting and precision measuring equipment
  • Where applicable, trained in maintenance processes such as but not limited to welding, plumbing, electrical and mechanical troubleshooting
  • Vocational or technical training in a maintenance related discipline, strongly preferred

 
Training requirements:

  • Demonstrated ability to comply to maintenance safety procedures such as lock-out tags, etc.
  • Demonstrate ability to safely complete job tasks utilizing manual equipment as well as use of gauges needed for repair fabrication
  • Demonstrate ability to perform preventative maintenance, and repair of facilities equipment
  • Where applicable, complete safety and maintenance training and or certification

 
 
 
 
 

 
Job Number: 1610060095
Job Location: KS City, MO
Duration: 12 months
Input Date: 01/25/2017
Last Updated: 12/14/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Eric Khassanov
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002FtZOAA0&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer - Level 2

Description:
Location: Dallas, TX / Grand Prairie, TX
Rate: $60.00 - $65.00/HR
Duration: 1 year contract
Shift: 1st Shift


**MUST be a U.S. Citizen**
**MUST have an Active Secret Clearance or have had one within the last two (2) years**


Job Description:
- Mechanical Design Engineer to support the Tactical Missiles Advanced Programs (TMAP) area design effort.
- The candidate will work and support the lead design engineer to conduct integration activities, impact to the system, required sub-system/component modifications, and impacts to system performance studies.
- Tasks assigned may include generation of Interface Control Drawings (ICD), generation of Instructional Engineering Release (IER), creation of solid models and drawings, and performing tolerance analyses.
- Tasks will include conceptual and detail design of missile integration concept components, systems, and subsystems, and creation of 3D solid models and 2D drawings.
- Effort will require coordination of design(s) with other mechanical / electrical disciplines, familiarity with missile to aircraft integration concepts, and tolerance analysis.
- Must have Active Secret Clearance at time of submittal, preferably (but not required) within the last 5 years.
- Clearance status on resume required.


Skill/Experience/Education
Mandatory: (MUST BE SHOWN ON RESUME)
**MUST have an Active Secret Clearance or have had one within the last two (2) years**
- Candidate should have a Bachelors of Science degree in Mechanical Engineering, or 10 years of equivalent experience, and 6-8 years of Computer Aided Design software experience using PRO Engineer / CREO 3.
- Candidate must be capable of creating and interpreting detail, assembly, and installation type drawings, knowledge of Geometric Dimensioning and Tolerancing, and experience with manufacturing engineering and fabrication processes.
- Familiarity with Microsoft Office applications is desired.
 
Job Number: 7915
Job Location: Savannah, GA
Rate: $60.00 - $65.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 09/28/2017
Last Updated: 02/05/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer - Entry Level

Description:
Job Title: Mechanical Engineer I
Location: Portland, OR 97217
Duration: 24 Months
Job Functions:
• The main function of this role is to provide a technical interface between Product Engineering and the Manufacturing Development Center.
• Position at MDC is at center of campus and get to work on all new designs 3-5 years ahead of production. Can also get to see the products get physically built and designs evolve. The work feeds directly into making these things more “manfucturable” and profitable. Work is enjoyable because you get to work with different groups in order to complete the projects at hand. Will also gain multiple perspectives and how it impacts different areas within the Organization. Good exposure to the company.

Essential Duties and Responsibilities:
• Interface with Product Engineering on designs for new Product Projects:
 Secure emerging design information from Product Engineering
 Understand difference between B/C/D sample level designs
 Ensure compatible maturity levels of parts used in Mockup / PoD
• Procure parts and assemblies required for Mockup / PoD:
 Provide data to suppliers for rapid prototypes
 Provide guidance to MDC Technicians procuring / fabricating prototype parts
• Problem Solving
 Assist MDC Technicians with problem identification, documentation, and resolution related to new product projects

Required background experience and skills:
• BS degree in electrical, mechanical, or manufacturing engineering, or commensurate work experience.
• 0-2 years of experience in product engineering design areas required.
• Creativity, verbal and written communication skills, analytical and problem solving ability.
• Team player and detail oriented.
• Ability to read engineering drawings and common computations.
• Siemens NX experience preferred, but CAD experience is okay.
 
Job Number: 4462
Job Location: Portland, ORE
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 24 Months
Start Date: ASAP
Input Date: 12/06/2017
Firm Name: OLSA RESOURCES INC
Attention: Sarabjit
Address: 3836 N BALLAST ST
City, State: PORTLAND, OR 97217
Phone: 503/608-7895
Fax Phone: 503/608-7896
Website: www.olsaresources.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
NX NC Programmer

Description:
5 Axis NC Programmer (NX / Unigraphics)

Purpose/ Summary

Provide robust CNC programs to facilitate the manufacture of Turbine Engine components.

Essential Duties and Responsibilities include the following. Other duties may be assigned.

Document all of the set-up information.

Review the fixturing.

Provide support for fixture design as required.

Evaluate the new cutting tools.

Analyze drawings, sketches and design data of the parts to determine the dimension and configuration of the cuts.

Select the appropriate tools and machine speeds and feed rates according to the machine shop processes, part specifications and machine capabilities.

Write the instruction sheets and cutter lists to guide set-up and operation of the machine.

Optimize the existing programs.

Possess a thorough understanding of the quality control procedures.

Ensures that the quality control standards are maintained.

Maintain production schedules from the prototype run to production.

Provide shop floor support for the life of the program.

Other duties may be assigned as necessary.

Supervisory Responsibilities:

The job has no supervisory responsibilities.

Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

EDUCATION and/or EXPERIENCE:

Two Year Technical Degree and a minimum of five (5) years of related experience. Unigraphics or Surfcam experience required. Experience in the use of CNC equipment, both programming and operation.

MATHEMATICAL SKILLS:

Ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals

REASONING ABILITY:

Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram forms.
Ability to deal with problems involving several concrete variables in standardized situations.

WORK ENVIRONMENT:

The characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this job, the employee may be exposed to moving mechanical parts, electrical equipment, acetone, alcohol, argon, braze alloys, nitrogen, hydrogen, oil based lubricants and cleaning solutions.

The employee is occasionally exposed to moderate cold and extreme heat.

The noise level in the work environment is usually middling.

PHYSICAL DEMANDS:

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

individuals with disabilities to perform the essential functions.

While performing the duties of this Job, the employee is regularly required to sit and use hands to finger, handle, or feel.

The employee is frequently required to talk or hear.

The employee is occasionally required to stand; walk; reach with hands and arms and stoop, kneel, crouch, or crawl.

The employee must occasionally lift and/or move up to 10 pounds.

Specific vision abilities required by this job include close vision and color vision.

Acknowledgements The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor
 
Job Number: 39926
Job Location: CT
Rate: open
Per Diem: direct hire
Overtime: no
Duration: permanent
Start Date: asap
Input Date: 11/28/2017
Last Updated: 12/06/2017
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Erica Price
Address: WESTRIDGE OFFICE PARK
2646 HIGHWAY 109 STE 207

City, State: WILDWOOD, MO 63040
Phone: 636/438-0312
800 Phone: 866/277-3343
Fax Phone: 636/220-8284
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Power Systems Engineer

Description:
- Develop vehicle power electrical and electronics specifications
- Design vehicle power electrical and electronic systems and components
- Design and analyze Electric Generators/Alternators and motors
- Design analog power circuits to include IGBTs, MOSFETs, etc.
- Experience with analog circuit design which focuses on electronic hardware for control and/or power conversion systems
- Experience with resolving circuit functional and performance issues with analysis (e.g., frequency analysis), simulation (e.g., PSpice, MatLab, etc.), and testing
- Experience with high voltage power electronics circuit board schematic capture and layout (using such tools as Mentor Graphics, ORCAD, etc.)
- Experience with electrical machine/power conversion control theory & implementation
 
Job Number: 41173
Job Location: MI
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 11/29/2017
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Procurement Engineer - Level 1

Description:
Procurement Engineer - Level 1

Location: Orlando, FL
Pay Rate: DOE ($35/hr - $37/hr)
Duration: 11-12 month W2 contract
Shift: First, 9/80, OT
**MUST be a U.S. CITIZEN**

Description
-Candidate will work with an integrated team including production operations, suppliers, sourcing, test engineers and other functional personnel to review and establish procurement quality flow-down requirements for commodity purchase requisitions, resolve procurement issues as well as complex supplier challenges
-Ensure nonconformance's are identified, trended and resolved in a timely manner.
-Responsibilities include performing root cause analysis, validating corrective and preventive actions attributed to factors that include supplier, design, production, process, software.
-As a vital member of the team, a Procurement Quality Engineer evaluates the designs, both electrical and mechanical, to ensure a producible product is being proposed and the supply base has processes in place for a smooth production flow.
-Evaluates and determines usage decisions on purchased parts and materials for conformity to functional performance, electrical, mechanical and system requirements, standards, specifications, and processing requirements using predetermined methods and in some cases may determine methods and sequences.
-Verifications will include using such measuring devices as micrometers, gauges, and calipers.
-Visually inspects for obvious defects or damage such as corrosion, cracks, dents, scratches, and pits.
-Verifies specifications using purchase orders, blueprints, drawing or inspection instructions, and checklists. Maintains records of results.
-Makes pass/fail decisions on inspected goods. May improvise or adapt inspection and measuring devices as needed.
-May monitor and verify quality in accordance with statistical process or other control procedures.
-Candidate will serve as a liaison to the hourly inspector for technical expertise and problem resolution.
-Individual shall build strong relationship with Receiving, Supplier Quality Engineering and Production Ops personnel and serve as the Non-conforming Area P.O.C.

Skill/Experience/Education (Mandatory):
-A Bachelor’s degree from a technical field or 4 yrs of related of professional/technical experience.
-Procurement Engineering – (4-5+ years' experience required)
-Inspection and auditing skills in an operational mfg. setting
-Basic Computer Skills - MS Office (Word, Excel and PowerPoint) SAP (COS / P2P)
-Proficiency Root Cause Analysis training.
-Auditing and inspection experience.
-Strong communications skills - verbal/written
-Interpersonal Skills, Work Independently, Self Starter
-Strong understanding of engineering requirements
-Must be able to identify/document supplier's quality deficiencies and ensure effective corrective action
-Capable of performing root cause analysis and identifying solutions to complex problems
-Understanding engineering drawings requirements mechanical and electrical inspection methods
-A basic understanding of special processes and an overall understanding of how to manage and interface with suppliers on a daily bases to support the Program
-Ability to focus on continual improvement practices using causal analysis tools to drive corrective and preventive actions
-Must have knowledge and understanding of critical design attributes and auditing capabilities
-Strong organizational skills w/the ability to work in a dynamic environment, multi-task, meet deadlines
-Strong communication skills (both oral and written) will be necessary to support the assignment and weekly reports
-Must be able to effectively communicate and interface with Quality Program Management, Engineering, Supplier Quality Management, Sub-contracts (Buyers) and Government Representatives
-This position will be located at a facility that requires special access and requires the selected candidate to be a US Citizen

Desired:
-Must be able to effectively communicate and interface with Suppliers, Quality Program Management, Engineering, Supplier Quality Management, Sub-contracts (Buyers) and Government Representatives
-Must be able to effectively communicate and interface with Suppliers, Quality Program Management, Engineering, Supplier Quality Management, Sub-contracts (Buyers) and Government Representatives
-A basic understanding of the MFC SAP and P2P business systems
-ASQ Certification or Lean Six Sigma Certification (Green Belt/Black Belt)
-Experience with working with suppliers in a dynamic environment
-Experience with performing First Article Inspections to AS9102 requirements
-Experience with source inspection and surveillance activities at suppliers
-Strong understanding of AS9100 and ISO 9001 Quality Management Systems
 
Job Number: 8103
Job Location: Orlando, FL
Rate: 35-37
Per Diem: Split Possible
Overtime: Possible
Duration: 11 months
Start Date: ASAP
Input Date: 10/17/2017
Last Updated: 02/05/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Product Repair/Mod Tech C

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Product Repair/Mod Tech C
(U.S. Citizenship Required*)
Hurlburt Field, FL
2017-5049

Responsibilities:
• Assembles, disassembles and/or modifies systems by changing, removing, replacing or upgrading aerospace vehicle components to correct failures or implement changes.
• Oversees assembly, disassembly or overhaul.
• Configures aerospace vehicles and bench test equipment.
• Troubleshoots complex pneumatic, hydraulic and electrical systems to isolate mechanical or electrical faults and repair faulty components.
• Performs validation/verification testing of systems and components.
• Documents procedures and established processes to ensure contractual and regulatory compliance (e.g., repairs, test results, applicable modifications and inspection results).
• Inspects components and verifies repairs for flight worthiness requirements.
• Oversees training. Works under general direction.
• 2nd shift position

Qualification:
• Required – Active Secret Clearance.
• At times travel may be necessary, about 10% of the time. No scheduled international travel at this time.
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
High school diploma or GED and typically 4 or more years’ related experience or an equivalent combination of education and experience.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!



APPLY ONLINE HERE: https://careers-moseleytechnical.icims.com/jobs/5049/product-repair-mod-tech-c/job?mode=view
 
Job Number: 2017-5049
Job Location: Hurlburt Field, FL
Duration: 12 Months
Input Date: 12/01/2017
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: https://careers-moseleytechnical.icims.com/jobs/5049/product-repair-mod-tech-c/job?mode=view
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Product Repair/Mod Tech C

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Product Repair/Mod Tech C
(U.S. Citizenship Required*)
Fort Walton Beach, FL
2017-5048

Responsibilities:
• Assembles, disassembles and/or modifies systems by changing, removing, replacing or upgrading aerospace vehicle components to correct failures or implement changes.
• Oversees assembly, disassembly or overhaul.
• Configures aerospace vehicles and bench test equipment.
• Troubleshoots complex pneumatic, hydraulic and electrical systems to isolate mechanical or electrical faults and repair faulty components.
• Performs validation/verification testing of systems and components.
• Documents procedures and established processes to ensure contractual and regulatory compliance (e.g., repairs, test results, applicable modifications and inspection results).
• Inspects components and verifies repairs for flight worthiness requirements.
• Oversees training. Works under general direction.
• 2nd Shift position

Qualification:
• Required – Active Secret Clearance
• Occasional travel is required both domestically and internationally at times to perform depot level modifications. Current passport is required. No scheduled trips at this time.

*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
High school diploma or GED and typically 4 or more years’ related experience or an equivalent combination of education and experience.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!



APPLY ONLINE HERE: https://careers-moseleytechnical.icims.com/jobs/5048/product-repair-mod-tech-c/job?mode=view
 
Job Number: 2017-5048
Job Location: Ft. Walton Beach, FL
Duration: 12 Months
Input Date: 12/01/2017
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: https://careers-moseleytechnical.icims.com/jobs/5048/product-repair-mod-tech-c/job?mode=view
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Product Repair/Mod Tech C

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Product Repair/Mod Tech C
(U.S. Citizenship Required*)
Eglin AFB, FL
2017-5047

Responsibilities:
• Perform efforts associated with sealing, wrapping, bonding, tying, and closure of wire harnesses and cables in accordance with standard processes (electrical).

Qualification:
• Required – Interim Secret Clearance
• Able to perform connector terminations including shielded wires, coaxial cables, and fiber optic wiring.
• Able and understanding of routing instructions and handling of harnesses.
• Demonstrates the capability to read and interpret engineering drawings, technical orders, process specification, and retrofit requirements to perform electrical modification/repair.
• Experienced in the use of tooling assemblies and fixtures for depot level modification and repair of electrical wiring.

*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
High school diploma or GED and typically 4 or more years’ related experience or an equivalent combination of education and experience.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!



APPLY HERE: https://careers-moseleytechnical.icims.com/jobs/5047/product-repair-mod-tech-c/job?mode=view
 
Job Number: 2017-5047
Job Location: Eglin AFB, FL
Duration: 12 Months
Input Date: 12/01/2017
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: https://careers-moseleytechnical.icims.com/jobs/5047/product-repair-mod-tech-c/job?mode=view
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Product Repair/Mod Tech C

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Product Repair/Mod Tech C
(U.S. Citizenship Required*)
Cannon AFB, NM
2017-5051

Responsibilities:
• Assembles, disassembles and/or modifies systems by changing, removing, replacing or upgrading aerospace vehicle components to correct failures or implement changes.
• Oversees assembly, disassembly or overhaul.
• Configures aerospace vehicles and bench test equipment.
• Troubleshoots complex pneumatic, hydraulic and electrical systems to isolate mechanical or electrical faults and repair faulty components.
• Performs validation/verification testing of systems and components.
• Documents procedures and established processes to ensure contractual and regulatory compliance (e.g., repairs, test results, applicable modifications and inspection results). Inspects components and verifies repairs for flight worthiness requirements.
• Oversees training. Works under general direction.

Qualification:
• Required – Active Secret Clearance
• Required – Passport for travel to International assignments whenever needed. No scheduled trips at this time.
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• High school diploma or GED and typically 4 or more years’ related experience or an equivalent combination of education and experience.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!



APPLY ONLINE HERE:https://careers-moseleytechnical.icims.com/jobs/5051/product-repair-mod-tech-c/job?mode=view
 
Job Number: 2017-5051
Job Location: Cannon AFB, NM
Duration: 12 Months
Input Date: 12/01/2017
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: https://careers-moseleytechnical.icims.com/jobs/5051/product-repair-mod-tech-c/job?mode=view
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Product Repair/Mod Tech C

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Product Repair/Mod Tech C
(U.S. Citizenship Required*)
Cannon AFB, NM
2017-5050

Responsibilities:
• Assembles, disassembles and/or modifies systems by changing, removing, replacing or upgrading aerospace vehicle components to correct failures or implement changes.
• Oversees assembly, disassembly or overhaul.
• Configures aerospace vehicles and bench test equipment.
• Troubleshoots complex pneumatic, hydraulic and electrical systems to isolate mechanical or electrical faults and repair faulty components.
• Performs validation/verification testing of systems and components.
• Documents procedures and established processes to ensure contractual and regulatory compliance (e.g., repairs, test results, applicable modifications and inspection results).
• Inspects components and verifies repairs for flight worthiness requirements.
• Oversees training. Works under general direction.

Qualification:
• Required – Active Secret Clearance.
• Required – Passport for travel to International assignments whenever needed. No scheduled trips at this time.
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
High school diploma or GED and typically 4 or more years’ related experience or an equivalent combination of education and experience.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!



APPLY ONLINE HERE: https://careers-moseleytechnical.icims.com/jobs/5050/product-repair-mod-tech-c/job?mode=view
 
Job Number: 2017-5050
Job Location: Cannon AFB, NM
Duration: 12 Months
Input Date: 12/01/2017
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: https://careers-moseleytechnical.icims.com/jobs/5050/product-repair-mod-tech-c/job?mode=view
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Product Repair/Mod Tech C

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Product Repair/Mod Tech C
(U.S. Citizenship Required*)
NAS Lenmoore, CA
2017-5058

Responsibilities:
• Assembles, disassembles and/or modifies systems by changing, removing, replacing or upgrading aerospace vehicle components to correct failures or implement changes.
• Oversees assembly, disassembly or overhaul.
• Configures aerospace vehicles and bench test equipment.
• Troubleshoots complex pneumatic, hydraulic and electrical systems to isolate mechanical or electrical faults and repair faulty components.
• Performs validation/verification testing of systems and components.
• Documents procedures and established processes to ensure contractual and regulatory compliance (e.g., repairs, test results, applicable modifications and inspection results).
• Inspects components and verifies repairs for flight worthiness requirements.
• Oversees training. Works under general direction.

Qualification:
• Required – Active Secret Clearance
• Required – Intermediate proficiency in structures and aircraft structures assembly
• Required – Able to interpret schematics, assembly drawings, and technical manuals as well as read engineering drawings
• Able to travel domestically or internationally as required to support short-notice contingencies and priority workloads.
• Able to bring your own tools.

*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
High school diploma or GED and typically 4 or more years’ related experience or an equivalent combination of education and experience.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!


APPLY ONLINE HERE: https://careers-moseleytechnical.icims.com/jobs/5058/product-repair-mod-tech-c/job?mode=view
 
Job Number: 2017-5058
Job Location: NAS Lenmoore, CA
Duration: 12 Months
Input Date: 12/01/2017
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: https://careers-moseleytechnical.icims.com/jobs/5058/product-repair-mod-tech-c/job?mode=view
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Product Repair/Mod Tech C

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Product Repair/Mod Tech C
(U.S. Citizenship Required*)
NAS Lenmoore, CA
2017-5059

Responsibilities:
• Assembles, disassembles and/or modifies systems by changing, removing, replacing or upgrading aerospace vehicle components to correct failures or implement changes.
• Oversees assembly, disassembly or overhaul.
• Configures aerospace vehicles and bench test equipment.
• Troubleshoots complex pneumatic, hydraulic and electrical systems to isolate mechanical or electrical faults and repair faulty components.
• Performs validation/verification testing of systems and components.
• Documents procedures and established processes to ensure contractual and regulatory compliance (e.g., repairs, test results, applicable modifications and inspection results).
• Inspects components and verifies repairs for flight worthiness requirements.
• Oversees training. Works under general direction.

Qualification:
• Required – Active Secret Clearance
• Experienced aircraft mechanic who can interpret schematics, assembly drawings, and technical manuals as well as read engineering drawings
• Able to travel domestically or internationally as required to support short-notice contingencies and priority workloads.
• Able to bring your own tools.

*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
High school diploma or GED and typically 4 or more years’ related experience or an equivalent combination of education and experience.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!


APPLY ONLINE HERE: https://careers-moseleytechnical.icims.com/jobs/5059/product-repair-mod-tech-c/job?mode=view
 
Job Number: 2017-5059
Job Location: NAS Lenmoore, CA
Duration: 12 Months
Input Date: 12/01/2017
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: https://careers-moseleytechnical.icims.com/jobs/5059/product-repair-mod-tech-c/job?mode=view
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Manager III Technical ( Plymouth, MN ) 7851097

Description:
Project Manager III Technical ( Plymouth, MN ) 7851097
5 month plus contract

Pay rate: $50 - 75 /hr depending on experience


**Will develop special test equipment. Need asst. tracking projects and scheduling tasks (juggling ~15 programs.) Will use a system to help manage workloads/deadlines.
Will Set up the Master Project Plan. Bachelors is important (Electrical Eng.) Labview exp key, PMP Cert REQUIRED.
Military exp is helpful. Should have exp in a relevant industry.
Will need to meet basic quals. listed below. In interview, will ask about exp w/ tools listed below.
Will ask if have designed electrical circuit boars, use of tools, and level of knowledge.
Will ask about Labview - installation, programming, and architecture. If have military exp, will ask about results achieved.

Program team consists of ~9 test eng. supporting ~12 programs at a time. Will report to Dir. of Eng and get direction from a Prog. Mgr.**

Creates, maintains, and tracks projects for special electronic and guidance subsystem test equipment. Ensures project content is delivered on-time and within budget. Assembles a resource-loaded master schedule for all projects in the special test equipment team and identifies recommended actions for resources and schedule. Prepares reports for upper management regarding status of projects.

Required qualifications:
Bachelor's degree
PMP certification
2 years experience as a project manager or program manager
U.S. citizen

Preferred qualifications:
Bachelor's degree in Electrical Engineering
5 years experience as a project manager or program manager
Experience as non-commissioned officer in the military
Experience in LabView programming
Experience managing projects in the aerospace or defense industries
Ability to travel 10-25% of the time within the US for launch events
 
Job Number: 7851097
Job Location: Plymouth, MN
Rate: 75
Per Diem: Split
Overtime: YEs
Duration: 5 month
Start Date: ASAP
Input Date: 01/01/2018
Firm Name: TALENTPRO CONSULTING
Attention: Tim
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X101
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Engineer

Description:
Lean Six Sigma Green or Black belt
Previous experience building Combat Vehicle

Perform drawing reviews (electrical, mechanical, machining, welding, paint) and provide constructive feedback to design engineers. Assist in the development of Final Inspection Records that support performance specification requirements. Develop detailed Quality plans for various core processes to include Large structure welding, machining, painting, vehicle assembly integration and test. Participate in Natural Work Teams to review Requests for Change and Requests for Variance. Participate in Corrective and Preventative action plan development and execution. Develop, Participate in and monitor Qual and FAT testing. Participate in 8D Containments. Report writing. Weekly and Monthly status reports. Process and fixture prove out support.
 
Job Number: 2545
Job Location: PA
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 12/07/2017
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Reliability Engineer - Level 2

Description:
Reliability Engineer - Level 2

Location: Orlando, FL
Pay Rate: DOE ($40/hr - $60/hr)
Duration: 1 year contract
Shift: First, 9/80, exempt OT
**MUST have an ACTIVE SECRET CLEARANCE**

Description
-Built-In-Test (BIT) Engineer to execute BIT program on DoD System, to include BIT allocations, predictions, modeling, and Failure Modes, Effects and Criticality Analysis (FMECA).
-The engineer will monitor suppliers in the development and implementation of BIT architecture, requirements and implementation.
-Conduct analysis and review of data from system and supplier test events and failures to identify issues and mature the BIT system through corrective action.
-Prepare and present at design and program reviews.
-Develop BIT DRSs and support hardware design activities.
-Support SW Engineers in the implementation of BIT requirements in SRS's.
-Generate and maintain BIT maturity metrics.
-Perform Reliability and BIT testing as necessary.
-Provide Reliability support as required.

Skill/Experience/Education (Mandatory):
- Active Secret security clearance
- Experience conducting Reliability efforts and testing and verification to include experience with performing reliability predictions, and Failure Mode, Effects, and Criticality Analysis (FMECA)
- Experience with Windchill Quality Solutions Reliability software tool or equivalent tool
- Experience with reliability Failure Reporting, Analysis, and Corrective Action System (FRACAS)
- Maintainability and Testability/Built-In-Test (BIT) engineering experience to include BIT Architecture definition and BIT analysis
- Strong interpersonal skills and an ability to build effective working relationships
- Strong oral and written communication skills, technical writing experience, and an ability to communicate findings to customers and management

Desired:
- Electrical Engineering degree.
- Strong electrical background with a good mechanical understanding.
- Diagnostic algorithm development – diagnostic tests/procedures to perform fault detection and fault isolation.
- Software skills – Ability to read code and design requirements for software engineers to write BIT tests.
- Ability to teach others BIT / testability.
- Practical hands on experience with hardware test and troubleshooting.
- Familiarity and ability to model systems with US Army Materiel Systems Analysis Activity (AMSAA) Reliability Growth Planning Models (PM2-Continuous and PM2-Discrete), Reliability Growth Tracking Model (RGTM-C), Reliability Growth Projection Models (ACPM, AMPM, and ADPM), and Reliability Test Planning Tools (IPT-C and IPT-D)
 
Job Number: 7873
Job Location: Orlando, FL
Rate: 40-60
Per Diem: Split Possible
Overtime: Yes, exempt
Duration: 1 year
Start Date: ASAP
Input Date: 09/25/2017
Last Updated: 02/05/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Reliability Engineer - Level 3

Description:
Reliability Engineer - Level 3

Location: Orlando, FL
Pay Rate: DOE ($40/hr - $60/hr)
Duration: 6 month contract
Shift: First, 9/80, OT exempt
**MUST have an ACTIVE SECRET CLEARANCE**

Description
-Develops, coordinates and conducts technical reliability studies and evaluations of engineering design concepts and design of experiments (doe) constructs.
-Recommends design or test methods and statistical process control procedures for achieving required levels of product reliability.
-Compiles and analyzes performance reports and process control statistics; investigates and analyzes relevant variables potentially affecting product and processes.
-Ensures that corrective measures meet acceptable reliability standards.
-Analyzes preliminary plans and develops reliability engineering programs to achieve company, customer and governmental agency reliability objectives.
-May develop mathematical models to identify units, batches or processes posing excessive failure risks.
-As necessary, proposes changes in design or formulation to improve system and/or process reliability.
-May determine units and/or batches requiring environmental testing, and specifies minimum number of samples to obtain statistically valid data.
-Lead execution of reliability, maintainability, testability, and system safety activities.
-Lead and execute reliability tasks including FRACAS, failure review boards/corrective actions, development tasks such as predictions, FMECAs, BIT development and effectively analysis, HALT, and BIT demonstrations.
-Provide status on activities as part of Program reviews and Supplier CABs.
-Will provide Reliability Engineering support to the JAGM Program area
•Develop reliability predictions using Relex and/or approved prediction methodologies for mechanical and electrical designs.
•Perform Failure Mode and Effects, and Criticality Analysis (FMECA). •Implement Built-In-Test (BIT) for new designs including Development and Validation of improvements to existing BIT through lab testing and/or BIT demonstrations
•Develop reliability program growth plans, and conduct of reliability growth analysis.
•Support of design reviews and test activities as required.
•Lead Reliability testing such as Highly Accelerated Life Testing (HALT), Aging and Reliability Qualification Test (RQT).
•Participate in Corrective Action Boards (CAB) and Failure Review Boards (FRB).
•Identify Failure Review and Corrective Action System (FRACAS) trends to identify and prioritize failure modes to investigate for corrective actions.
•Review Engineering Change Proposals (ECP), support Concept Screening Board (CSB) and Configuration Control Board (CCB).

Skill/Experience/Education (Mandatory):
•Experience performing BIT analysis.
•Experience performing reliability predictions.
•Experience with reliability FRACAS and data mining.
•Experience with the FMECA process.
•Possess excellent written and oral communication skills, with experience developing and delivering presentations to peers as well as management.
•Proficient with Microsoft Office products.
•Experience with Windchill software tool.
•Must have at least an Interim Secret security clearance prior to start.

Desired:
•Strong electrical background with a good mechanical understanding.
•Practical hands on experience with hardware test and troubleshooting.
•Analytical thinker with a demonstrated ability of solving complex problems which require ingenuity and innovation.
•Candidate should be a self-starter capable of performing assigned tasks with little direction.
• Final Secret security clearance.
 
Job Number: 7875
Job Location: Orlando, FL
Rate: DOE
Per Diem: Split Possible
Overtime: Yes, exempt
Duration: 6 mos
Start Date: ASAP
Input Date: 09/29/2017
Last Updated: 12/20/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
SD-Tech Pubs-LSA-3.Advanced

Description:
The Canadian Maritime Helicopter Program (CMHP) Program is looking for a talented and motivated Logistics Support Analyst to support the development and sustainment of the CMHP CH-148 Publications. Candidate will report directly to the CMHP Integrated Product Team (IPT) Lead - LSA personnel. The maintenance program is developed in the Client
Maintainability System (SAMS) and provides the framework for the maintenance publications. The Technical manual series for this program is prepared in accordance with S1000D authoring specification and delivered in an Interactive Electronic Technical Manual (IETM) product. This IETM contains principles of Operation, Maintenance, Illustrated parts Breakdown, and
Testing/Troubleshooting procedures inclusive of system diagnostics.

The primary purpose of the Logistic Support Analysis process is to provide up-front design influence to enhance overall aircraft supportability and operational readiness, while reducing the life cycle cost. The overall objectives of the Logistic Support Analysis are to establish, validate and update the maintenance concept for the entire aircraft life cycle.

The Logistic Support Analyst position requires technical knowledge of the UH-60/S70, SH-60/S70B, S-92/H92 helicopters with experience involving a broad knowledge of Helicopter / Aircraft mechanics, electrical/electronics maintenance and support functions including Component Inventory, Trade Studies, Data Analysis, and Modeling. The position also involves the application of Logistic principles to support Helicopter Maintenance and related support functions which includes Electrical / Electronic/Mechanical System Operational Analysis, and Maintenance Tasking. Familiarity with engineering drawing interpretation, maintainability and reliability principles, assembly and disassembly methods and manufacturing and inspection methods is required.
 
Job Number: 17-705-1514
Job Location: Northeast
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 03/21/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sensor Integration Hardware Engineer

Description:
Be a part of a fortune 500 Combat Systems group and a global leader in the design, development, production, support and enhancement of tracked and wheeled military vehicles. Our client has a 70 year defense heritage of providing a full spectrum of high quality, technically superior, high value products and services to the United States and its Allies. Their employees are dedicated to making the Company the World’s preferred supplier of land vehicles and weapons systems.

If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

Sensor Integration Hardware Engineer
(U.S. Citizenship Required*)
Sterling Heights, MI
2017-5033
Responsibilities:
The Sensor Integration Hardware Engineer position is responsible for electronics design, implementation, test, and support of new sensor-based components & subsystems.
• Support concept to production H/W including requirements analysis, design, debug, test, and qualification
• Design, Develop, and Test Display Electronics, Components, and Subsystems
• Create detailed circuit board Specifications, ICD's, and test plans
• Support component selection, procurement, and oversight of prototype hardware build
• Create circuit board schematics, design circuit board assemblies, and create circuit board assembly layout
• Support concurrent engineering reviews and Trade Studies
• Develop Engineering Design Fixes, and Coordinate Solutions
• Perform technology research, feasibility assessments, and detailed hardware design requirements definition
• Develop concepts to support advanced technology initiatives, proposals, and demonstrators
• Lead engineering teams in development of software that is safety certifiable under MIL-STD-882E and/or ISO-26262

Qualifications:
• Familiarity with electrical hardware design and implementation in support of sensor integration
• Experience with real-time processing of sensor data
• Experience with Analog and Digital Circuit Design, including PCB design
• Experience with schematic entry and circuit board design tools (i.e. Mentor Graphics)
• Experience with Single Board Computers and Microcontrollers
• FPGA Design and Simulation, VHDL
• Experience with Analog and Digital Video Circuits
• Familiarity with Military Standards and Test Requirements
• Proficient in MIL-STD-882E and ISO-26262 and/or other safety-related specifications

*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelors’ in Engineering, or specifically Electrical or Electronics Engineering, required with a minimum of 10 years applicable experience.
• Masters’ degree preferred; fewer years of experience will be required with an advanced degree.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunities to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!


TO APPLY, PLEASE VISIT OUR WEBSITE: https://careers-moseleytechnical.icims.com/jobs/5033/engrg-specialist-e%26c/job?mode=view
 
Job Number: 2017-5033
Job Location: Sterling Heights, MI
Duration: 12 Months
Input Date: 12/05/2017
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Aaron Burrows
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Simulation & Software Engineer

Description:
Simulation & Software Engineer
Savannah, GA
Long Term Contract
$58.00-63.00/Hr

Unique Skills:
1. Matlab/Simulink experience modeling real time aircraft systems
2. Aerospace background with avionics lab testing experience
3. Ability to understand aircraft electrical wiring diagrams as it relates to HIL simulation
4. Experience with high level programming or scripting language such as C/C++, Python
5. Knowledge of data protocols used in aerospace
6. Experience modeling aircraft systems in real time on industry standard simulation platforms (eg NI, Speedgoat, Dspace,ADI)
7. Flight and/or aircraft system lab HIL simulation experience
8. Ability to work independently and self-govern priorities in accordance with lab customer needs

Job Description
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description.5 ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

Principal Duties and Responsibilities: Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7079
Job Location: Savannah, GA
Rate: 58.00-63.00/Hr
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 02/22/2017
Last Updated: 02/14/2018
Firm Name: INCONEN CORPORATION
Attention: Brad
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer with active secret / Matlab Simulink CA

Description:
160101
Requirement #AERO-REQ-0625
Work Location Palmdale, CA
Work WeeK 9/80-A
Priority High
Needed Date 08/29/2017
End Date 05/29/2018
Number of Resources 1
Security Clearance Secret (Prime Contract:, Can start w/o clearance:No, Interim Clearance Sufficient:No)


Title: Software Engineer

Description
Develop, analyze, integrate, and test flight control laws and embedded software for the Advanced Development Programs (ADP, Skunk Works) Flight Control and Vehicle Management Systems Integration team. Contribute to software requirements, design, code, reviews, and test of operational flight programs. Good oral and written communication skills required as is the ability to flex and adapt in a fast-paced team environment. Selected applicant will be subjected to government security investigation and must meet eligibility requirements for access to classified information and special program clearances
Candidate must possess an active SECRET clearance.

Skill/Experience/Education
Mandatory:

Candidate must have Flight Control system experience and Experience with MATLAB, OR Simulink
Candidate must possess an active SECRET clearance.
Desired:

Bachelor's Degree in Electrical, Mechanical or Aerospace Engineering


Interview Required Yes
OT Allowed Yes (OT Limitation: No)
Travel No
Non-Exempt
Rates
0-4 Yrs Pay Rate: 65.00 USD
5-8 Yrs Pay Rate: 70.00 USD
9+ Yrs Pay Rate: 75.00 USD
 
Job Number: JE-0625
Job Location: Palmdale, CA
Rate: 65-75/hr DOE
Per Diem: no
Duration: 9 month contract
Input Date: 04/18/2018
Last Updated: 04/19/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Supplier Manager

Description:
1. Review supplier's software plans to ensure that they meet the requirements of their statement of work.
2. Ensure supplier executes to the contracted schedule. Work with the supplier to develop alternate execution plans for issues that will impact schedule commitments.
3. Participate in supplier software technical reviews and audits and witness formal software test activities.
4. Analyze supplier software metrics assessing the supplier?s software status and present status to management.
5. Work with suppliers and the customer to deliver software products to the customer in accordance with schedule, quality and technical performance requirements as identified by the contract
6. Review of software requirements and test documents to ensure compliance with the contract and approved software plans.
7. Act as interface between the customer and the supplier to negotiate incorporation of customer comments towards the acceptance of the supplier's software documents.
8. Act as the software representative in the Supplier IPT meetings.

Education - B.S. in Electrical or Software Engineering, Computer Science, or Mathematics

Experience - 10 years of experience in Program Engineering Management and Program Management. Experience with FAA Certification and RTCA/DO-178B a plus.
Experience in earned value management and critical path management required.
U.S. citizen that holds or is qualified to obtain Secret level U.S. Government security clearance.

Comments - Seeking a highly motivated, flexible individual that is customer and results focused. Excellent written and oral communication, presentation, inter-personal and organizational skills are required.
 
Job Number: 7068
Job Location: Shelton, CT
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: 15 months
Start Date: 125/2017
Input Date: 11/29/2017
Firm Name: UNIVERSAL STAFFING SERVICES
Attention: Nancy Boyce
Address: 628 HEBRON AVE
City, State: GLASTONBURY, CT 06033
Phone: 860/527-8135
Website: www.ussjobs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Specialist Systems Engineer IV

Description:
Specialist Systems Engineer IV

Location: Canoga Park, CA
Pay Rate: DOE ($50/hr - $75/hr)
Duration: 6 month W2 contract
Shift: Regular 40 hour week, OT possible
** Candidates must be U.S. Citizens. Dual Citizens or non-U.S. passport holders are NOT acceptable **

Duties:
-Without appreciable direction and exercising considerable latitude in determining technical objectives and approaches to assignments, performs in a largely independent role for the Systems Engineering organization.
-Typical responsibilities include: May plan, conduct, and provide technical Systems Engineering direction on projects or major phases of significant project assignment, coordinating the efforts of technical support staff in the performance of assigned projects.
-Requires the use of advanced Systems Engineering techniques in management of requirements and risk for developing rocket propulsion systems.
-Assesses the feasibility and soundness of proposed engineering evaluation tests, products or equipment when necessary data are insufficient or confirmation by testing is advisable.
-Represents the organization in conferences to resolve important questions and to plan and coordinate work. May direct, coordinate and review the work of a small staff of engineers and/or technicians; estimates personnel needs and schedules and assigns work to meet completion date.
-Or, as individual researcher or staff specialist may be assisted on projects by other engineers or technicians. Develops solutions to complex problems which require the use of ingenuity and creativity.
-Work is reviewed at extended intervals for desired results and achievement. Contacts include interacting with customer personnel on technical matters often requiring coordinated activity across organizational lines.

Breakdown:
60% - Develops hardware and software requirements for rocket propulsion systems product development. Responsible for derivation, allocation, and documentation of requirements in a requirements database. Responsible for the development and maintenance of system, subsystem, and component specifications. Coordinates requirements and related specification change management with IPT members. Defines and coordinates requirements verification plans with integrated product team members, plans and manages compliance assessment and certification.
15% - Performs functional analysis in support of requirements development effort. Supports and/or coordinates system trade studies. Coordinates selection of optimized concept baselines through benefit/cost trades in support of definition of system architecture and objectives.
15% - Coordinates project risk assessment and management and prepares and reports results on mitigation plans.
10% - Communicates results in oral presentations and written communication.

Skills:
-9 years minimum directly related industry experience in Systems Engineering disciplines (requirements development and management, risk management, and system integration) across the full product development life-cycle for aerospace/rocket propulsion system design and development.
-Experience with requirements management software (IBM Rational DOORS, IBM Requisite Pro, etc.).


Education:
-Bachelor degree in Systems Engineering or appropriate discipline/science (Mechanical/Electrical/Aerospace).
-Advanced degree desirable.
-Coursework in Systems Engineering (requirements management, risk management, product development cycle) disciplines and rocket propulsion strongly desired.
-Trained/experienced in Microsoft Office.

Skills Required:
AEROSPACE SYSTEMS ENGINEERING
 
Job Number: 8319
Job Location: Canoga Park, CA
Rate: 50-75
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 01/12/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Specialist Systems Engineer IV / hardware experience in the requirements, integration and risk discipline of Systems Engineering / propulsion hardware CA

Description:
160779/7616417

Job Title: Specialist Systems Engineer IV
$75/hr max
Looking for hardware experience in the requirements, integration and risk discipline of Systems Engineering. Would prefer this experience to be in propulsion hardware.


Number of Positions: 1

Remaining Positions: 1

Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **





Without appreciable direction and exercising considerable latitude in determining technical objectives and approaches to assignments, performs in a largely independent role for the Systems Engineering organization. Typical responsibilities include: May plan, conduct, and provide technical Systems Engineering direction on projects or major phases of significant project assignment, coordinating the efforts of technical support staff in the performance of assigned projects. Requires the use of advanced Systems Engineering techniques in management of requirements and risk for developing rocket propulsion systems. Assesses the feasibility and soundness of proposed engineering evaluation tests, products or equipment when necessary data are insufficient or confirmation by testing is advisable. Represents the organization in conferences to resolve important questions and to plan and coordinate work. May direct, coordinate and review the work of a small staff of engineers and/or technicians; estimates personnel needs and schedules and assigns work to meet completion date. Or, as individual researcher or staff specialist may be assisted on projects by other engineers or technicians. Develops solutions to complex problems which require the use of ingenuity and creativity. Work is reviewed at extended intervals for desired results and achievement. Contacts include interacting with customer personnel on technical matters often requiring coordinated activity across organizational lines.



60% - Develops hardware and software requirements for rocket propulsion systems product development. Responsible for derivation, allocation, and documentation of requirements in a requirements database. Responsible for the development and maintenance of system, subsystem, and component specifications. Coordinates requirements and related specification change management with IPT members. Defines and coordinates requirements verification plans with integrated product team members, plans and manages compliance assessment and certification.



15% - Performs functional analysis in support of requirements development effort. Supports and/or coordinates system trade studies. Coordinates selection of optimized concept baselines through benefit/cost trades in support of definition of system architecture and objectives.



15% - Coordinates project risk assessment and management and prepares and reports results on mitigation plans.



10% - Communicates results in oral presentations and written communication.

Skills:
-9 years minimum directly related industry experience in Systems Engineering disciplines (requirements development and management, risk management, and system integration) across the full product development life-cycle for aerospace/rocket propulsion system design and development.

-Experience with requirements management software (IBM Rational DOORS, IBM Requisite Pro, etc.).

Education:
-Bachelor degree in Systems Engineering or appropriate discipline/science (Mechanical/Electrical/Aerospace).

-Advanced degree desirable.

-Coursework in Systems Engineering (requirements management, risk management, product development cycle) disciplines and rocket propulsion strongly desired.

-Trained/experienced in Microsoft Office.

Skills:
Required

AEROSPACE SYSTEMS ENGINEERING

State/Province: California
City/Town: Canoga Park

Start Date: 12/18/2017 Hours Per Week: 40.00
Est. End Date: 06/17/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7616417
Job Location: Canoga Park, CA
Rate: 75/hr max
Duration: 6 month contract
Input Date: 12/19/2017
Last Updated: 01/12/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr Electrical Engineer I – ability to obtain and hold a DoD secret security clearance TX AL AZ

Description:
Sr Electrical Engineer I – Clearance 7317193 - $75.00 HR

Senior Designer or Electrical Engineer with
understanding and wide application of technical theories, and concepts in digital design, with general
knowledge of other related disciplines. The Senior
Designer provides technical solutions to a wide range
of difficult problems. This position will function in a
multi-disciplined design team. The person will be the
Responsible Engineering Authority (REA) for
hardware design, fabrication, assembly, test, and
integration of a circuit card. Designs include
technology of processors, FPGAs, memory, and
industry interfaces, such as PCIe, Ethernet, I2C,
UART. Candidates can independently determine and
develop approach to solutions to contribute to the
completion of specific programs and projects.

Required Skills: U.S. Citizenship required • A minimum of 4 years’ experience in Digital Design • Proven ability to take a design concept from the block diagram or requirements level and develop a complete hardware design • Experience with PCB design tasks and proven ability to use tools to design (schematic capture), analyze and simulate designs prior to hardware execution. • Experience with embedded test techniques, design for test, design margin analysis and circuit design for production • A strong advocate for process improvement • A self-motivated and effective communicator • Experience in managing schedule and resources to meet assigned milestones • Ability to obtain and retain security clearance Desired Skills: • Experience using Mentor Graphics Design Creation tools: DxDesigner, xDX Designer VX, and Constraint Editor System (CES) • Experience using Mentor Graphics PCB electronic circuit design software: HyperLynx signal integrity, power integrity, and analog simulation, Xpedition Enterprise (xPCB) • Six Sigma specialist • Existing Secret security clearance Required Education (including Major): Bachelor’s Degree in Electrical Engineering (MS preferred) or similar degree and meets the experience requirements This position requires the ability to obtain and hold a DoD secret security clearance.
 
Job Number: MB-7317193
Job Location: McKinney, Huntsville, Tucson, TX, AL, AZ
Rate: 75/hr max
Duration: 18 month contract
Input Date: 12/01/2017
Last Updated: 01/03/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr Electrical Engineer II - Clearance / ability to obtain a Secret security Clearance AZ TX AL

Description:
Sr Electrical Engineer II – Clearance 7317190

Senior Designer or Electrical Engineer to contribute
to the design, analysis, simulation, test, and
integration of digital electronic modules and/or CCAs
for Missile applications. The Senior Electrical
Engineer must be experienced in all aspects of circuit
card design from concept through delivery to higher
level assemblies as evidenced by multiple successful
design completions (including hardware designs with
processors, FPGAs, memory, and industry interfaces,such as PCIe, Ethernet, I2C, UART). This position
will function in multi-disciplined design teams across
multiple projects. This person will be the
Responsible Engineering Authority (REA) for
development of one or more complex modules, CCAs
or units and will be expected to apply rigorous and
systematic design processes to ensure total design
compliance. This position will interface with
Integrated Product Team Leads (IPTL) and stake
holders to ensure program objectives are achieved.
The position requires frequent use and application of
technical standards, principles, concepts and
techniques. Candidates will be expected to provide
solutions to a variety of technical problems of
moderate scope and complexity, working under
general supervision. Successful candidate should
expect to be immersed in a fast-paced, team-based,
and challenging technical environment where an
individual with talent and initiative can stand out and thrive.

Required Skills: • U.S Citizenship required The ability to obtain and retain a Secret security Clearance • Minimum of 6 years Engineering design experience, with at least 2 years in a senior position • A self-motivated and effective communicator • Ability to prioritize work of others and handle multiple tasks at a time • Experience in the development and design of electronic circuit designs, multi-assembly system/unit design, processor designs a plus • Proven ability to take a design concept from the block diagram or requirements level and develop a complete hardware design, and verifying via test and integration • Experience with PCB design tasks and proven ability to use tools to design (schematic capture), analyze and simulate designs prior to hardware execution. • Experience with embedded test techniques, design for test, design margin analysis and design for production • A strong advocate for process improvement • Experience in managing schedule and resources to meet assigned milestones • Capable of functioning in multi-disciplined design teams across multiple projects Desired Skills: • Experience using Mentor Graphics Design Creation tools: DxDesigner, xDX Designer VX, and Constraint Editor System (CES) • Experience using Mentor Graphics PCB electronic circuit design software: HyperLynx signal integrity, power integrity, and analog simulation, Xpedition Enterprise (xPCB) • Experience with intellectual property generation (patents & publications) • Team and project leadership skills • Knowledge of software and/or FPGA code development • Experience leading a program transition from development to production • Demonstrated ability to manage technical and schedule risks and to identify cost reduction opportunities • Knowledgeable in cost/schedule development and management Required Education (including Major): Bachelor’s Degree in Electrical Engineering (MS preferred) or similar degree and meets the experience
 
Job Number: MB-7317190
Job Location: McKinney, Huntsville, Tucson, TX, AL, AZ
Rate: open rate
Duration: 18 month contract
Input Date: 01/03/2018
Last Updated: 01/03/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr Engineering Quality Assurance Engineer

Description:
A Fortune 500 and worldwide leader in business aviation; specializing in Command and Control, Communications Networking, Rugged Computing, Information Assurance and Cyber Defense is searching for the right talent to fill this opportunity:

Sr Engineering Quality Assurance Engineer
(U.S. Citizenship Required*)
Orlando, FL
2017-5065

Responsibilities:
• Design methods and procedures to inspect, test, and evaluate precision and accuracy of production processes, production equipment, and finished products
• Perform analysis of reports and production data to identify trends and recommend updates or changes to quality standards and procedures when necessary
• Review Documents/Drawings/Instructions for conformance to requirements
• Compare defects against standards and recommends dispositions, and verify implementation of rework
• Collect, organize, and analyze project data; generate and/or review metrics
• Perform audits, assign corrective action, and verify implementation
• Participate in project reviews and meetings including technical design reviews, technical peer reviews
• Verify compliance to defined requirements
• Witness or monitor test activities
• Receive instructions from immediate supervisor; Work under general supervision
• Contact with multiple work groups as well as project leaders and other professionals within the Engineering, Manufacturing, and Quality departments
• Interface with various engineering disciplines, manufacturing, program management, and other quality personnel
• Work as an individual technical contributor on one or multiple project
• Participate as an active member of the project team
• Interface with customer representatives
• Resolve problems of moderate scope
• Travel may be required, on occasion

Qualifications:
• Able to obtain a U.S. Department of Defense Secret clearance
• Considerable knowledge of engineering (i.e., software, electrical, systems, etc) methodologies, tools, and standards
• Considerable knowledge of ISO 9001:2008, CMMI, ISO 14001 ASME, ANSI, EIA, etc.
• Considerable knowledge of Microsoft Office applications
• Skilled in written and verbal communication, including communicating issues, impacts, and corrective actions
• Able to multi-task and think creatively
• Considerable knowledge of interpretation of drawings
• Considerable skill in reviewing documents/drawings/instructions for conformance to requirements techniques
• Considerable skill in reporting quality activities, findings, and issues both in writing and verbally
• Considerable interpersonal skills
• Considerable knowledge of use of relevant inspection/measurement tools and techniques

*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
Bachelor's degree in Engineering, a related specialized area or field is required (or equivalent experience) plus a minimum of 2 years of relevant experience; or Master's degree.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!

TO APPLY, PLEASE VISIT OUR WEBSITE: https://careers-moseleytechnical.icims.com/jobs/5065/sr-quality-eng-1/job?mode=view
 
Job Number: 2017-5065
Job Location: Orlando, FL
Duration: 6 Months
Input Date: 12/05/2017
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Aaron Burrows
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Electrical Design Engineer - no C2C

Description:
Johnson Service Group (JSG) is searching for a talented contract Sr. Electrical Design Engineer with circuit level analysis and design experience.

We are seeking a senior electrical with a background in Aerospace, Automotive, Defense and related products/applications.

Summary of Job Scopes:

4-6+ years of electrical engineering experience, focused on circuit level analysis and design, mixed signal, and sensor integration.
Must be proficient with Mentor Graphics DxDesigner.
Layout of high complex hardware boards and derivatives.
Ability to run existing standard tools (e.g. layout tools, circuit analysis, dynamic simulation, etc.).
Proficient knowledge of engineering quality systems, including PLC, engineering change, configuration management, etc.
Solid understanding of component function and testing requirements.
Education: BS Degree in Electrical Engineering or a related technical discipline.
 
Job Number: 362234
Job Location: Niles, IL
Rate: DOE
Per Diem: yes
Overtime: possible
Duration: 3 to 6 months
Start Date: asap
Input Date: 11/30/2017
Last Updated: 01/08/2018
Firm Name: JOHNSON SERVICE GROUP
Attention: Rich Martinsen
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Staff Systems Electrical Engineer - No C2C

Description:
Johnson Service Group (JSG) is searching for a Staff Systems Electrical Engineer, capable of leading the design and development of main engine controls, including Full Authority Digital Engine (or electronics) Control (FADEC). This critical role will support the digital engine control design and development for Commercial and Defense aircraft turbine engines.

The Staff Systems Electrical Engineer is responsible for support of system development, leadership support, collaboration and process improvement, including Product Lifecyle (PLC) Management.

Summary of Job Scopes:

8-10+ years of related electrical engineering experience, ideally with a background in electronics or software design, within the Aerospace and Defense industries.
Will lead System Requirements Definition and Partitioning and flow down from higher level system to LRU components.
Will derive the requirements from the analysis of the primary system and establishes acceptance criteria for these requirements.
Able to resolve and negotiate requirement conflicts in order to establish a complete and consistent requirement set for the system.
Responsible for system verification and validation, including test plan writing.
Ability to drive System Architecture Definition and Design implementation, as well as System/Component Interface Management.
Motion Control Simulation/Analysis experience, including MATLAB SIMULINK or similar tools.
Familiarity with DOORS or similar Requirements management and Traceability tools.
Familiarity with Aerospace industry and the product development processes, including ARP4754, DO-178, DO-254, etc.

Education:

Bachelor's Degree in Electrical Engineering or a similar technical discipline
Master's Degree in Electrical Engine