Job Search Results

603 listings were found that matched your search words: Keywords: Electrical ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2018/01/23 Tuesday 05:59PM Pacific Time by ContractJobHunter. )

Listings 1 - 603

Go To My Job Tracker

Expand all descriptions

1st Shift

Description:
Perform maintenance in support of manufacturing facility on a variety of equipment throughout facility including machinery repairs, preventative maintenance, machine relocation, fabrication, welding, electrical repair and installation, plumbing (air, hydraulic, water) with use of a variety of equipment.  Responsible for monitoring hazardous waste for removal, maintenance of chemical storage area and clean up of chemical spills as required.  Nontoxic or non-hazardous.  Mainly Soap and/or grease
Will be operating a crane or fork lift.
 
Responsibilities:
Provide maintenance support in all areas of manufacturing facility including but not limited to machinery repairs, preventative maintenance, machine relocation, fabrication, welding, electrical repair and installation, plumbing (air, hydraulic, water) with use of a variety of equipment such as hand tools, welding equipment, fork lifts, and precision measuring equipment.  Maintain and develop preventative maintenance program for production related equipment.  Required to perform work in compliance to all safety and EHS policies and procedures. 
 
Qualifications:
  • Knowledge of EHS procedures and policies
  • Knowledge and safe use of production related equipment
  • Working knowledge and use of welding, electrical, and plumbing equipment including repair and maintenance of machinery
  • Millwright Skills and familiar with Electrical and/or Hydraulic
  • Able to interpret OEM handbooks and/or plant diagrams
  • Understanding of reading building plans and electrical schematics
  • Ability to use trouble-shooting and precision measuring equipment
  • Where applicable, trained in maintenance processes such as but not limited to welding, plumbing, electrical and mechanical troubleshooting
  • Vocational or technical training in a maintenance related discipline, strongly preferred

 
Training requirements:

  • Demonstrated ability to comply to maintenance safety procedures such as lock-out tags, etc.
  • Demonstrate ability to safely complete job tasks utilizing manual equipment as well as use of gauges needed for repair fabrication
  • Demonstrate ability to perform preventative maintenance, and repair of facilities equipment
  • Where applicable, complete safety and maintenance training and or certification

 
 
 
 
 

 
Job Number: 1610061453
Job Location: Las Vegas, NV
Duration: 12 months
Input Date: 01/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Eric Khassanov
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002G2BqAAK&URLSource=cjhunter

2228 - AVIONICS SYSTEMS INTEGRATOR - resume - word doc only

Description:
Responsible, as an Avionics Systems Integrator Specialist, to perform various tasks related to the development, qualification, certification and in-service support of Avionics systems on Challenger aircrafts.

Responsible for supporting investigation for in service and manufacturing issues and performing root cause analysis of Avionics systems.

Participate and define Avionics Systems architecture design to meet Aircraft Design Requirements and Objectives.

Support the Flight Test Center in development and certification tests; witnessing of tests may be required.

Support the Final Assembly Line and In Service Aircraft for any development issues.

Manage, review and approve the deliverables of the Avionics System Suppliers.

Work with other functions & disciplines of the Challenger program to provide required information and also to collect required data to allow the Avionics design, development & certification effort to progress.

Support other departments such as Production, Customer Support, Program Office and Product Planning.

Participate in meetings and design reviews with Avionics System Suppliers and certification authorities.

Be able to travel is a must.


University degree in Electrical, Electronics, Software, Aerospace Engineering or equivalent.

Must have at least eight (8) years of relevant experience with the design, development, integration and certification of Avionics systems.

Have a good knowledge with the specification, design, integration, test and certification of Avionics systems on aircraft.

Good knowledge of RTCA documents DO-178 and DO-160.

Good knowledge of part FAR25/525 certification process and with the ARP4754 standard.

Experience with civil aircraft and airworthiness authorities.

Systems: Datalink, Flight Management System and Display integration.

Proficient with the use of Microsoft Office software tools to produce presentation and reports.

Ability to work well in a team environment.

Strong communication skills (written and spoken).
 
Job Number: 2228
Job Location: Montreal, Canada
Rate: 64.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 01/17/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Email: tdm@tdm.ca
Website: www.tdm.ca

2231 - ELECTRICAL HARNESS DESIGNER - resume - word doc only

Description:
Produce and deliver Harness Data Reports based on Digital Mock-up and Mentor Graphics.

Integrate the design of the wire harnesses.

Incorporate changes (RFC, PCR) on the harness data reports.

Contribute to the team effort by meeting the team%u2019s objectives for productivity and quality.

Contribute to other relevant tasks needed to support the team%u2019s objectives.

Have a University degree in aircraft avionics or electrical engineering or equivalent work experience in wiring integration.

Have experience with harness manufacturing or methods.

Have a minimum of 5 years of relevant working experience in aerospace.

Have wiring design, wiring installation and/or wiring troubleshooting experience.

Mentor Graphics Harness XC tool knowledge is the primary requirement.

Also have experience with Catia V5.

Have a strong sense of responsibility and have good organization skills.

Must have excellent communication skills including the ability to read/write in English.

Are comfortable working with MS office suite.

Are familiar with BM%u2019s, RAE documents and BAPS related to harnesses.

Communicate clearly and openly with your team.

Embrace changes and new ideas.

Are persistent to reach your goals.

Seek out and accept feedback.
 
Job Number: 2231
Job Location: Montreal, Canada
Rate: 61.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 01/17/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Email: tdm@tdm.ca
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2297 - DESIGN ENGINEER - CABINET DETAILED DESIGN - cv word doc only

Description:
Act as a specialist in aircraft interior cabinets;

Search for information related to project assignment to the interior and exterior of the aircraft;

Manage customer requests related to customizations of interior options;

Establish technical requirements, mechanical and electrical interfaces and design, integrate, certify, test and troubleshoot the systems described above;

Assume responsibility for Definition engineering deliverables and milestones that the department must meet;

Bachelor's Degree in Mechanical or Equivalent Engineering or college.

Excellent knowledge in design and development of concepts using graphic design software.

Collaborate with others in a multidisciplinary team, adapt easily to changes and customer focused.

Customer focused, problem-solving and innovative focus as well;

Experienced with the CATIA V5 3D design tool;

Well organized and project focused.

Good oral and written communication skills in English and French;

Autonomous, flexible and results-oriented through project management skills;

Experience in the design or installation of cabinets to be assembled.
 
Job Number: 2297
Job Location: Montreal, Canada
Rate: 56.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 12/19/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

2304 - AVIONICS SYSTEMS ENGINEER - cv. word doc only

Description:
Support of Compliance to Certification Authority; author Certification Plans

Provide specialist advice relating to test methods and procedures

Review testing readiness and conformities of assigned systems

Review qualification, ground and flight test data of assigned systems

Review flight test reports containing data demonstrating proper system operation as required by Certification Authorities Regulations

Review and Sign flight release documentation (including safety of flight judgments)

Review system performance analysis to ensure proper compliance to regulations

Coordinate with other Certification Authority Delegates for integrated functions (ie, Human Factor, Pilots, et al)

May provide technical leadership to a small engineering team for dedicated technical investigation / test.

Bachelor's degree in Avionics / Electrical/ Aerospace Engineering, plus 12-15 years' experience in Avionics systems design and certification.

Able to obtain a Certification Authority Delegation for assigned systems

Working knowledge of Rockwell Collins Proline 21 or Fusion Avionics Systems would be advantageous.

Must have excellent communication skills in English - both written and oral and be PC literate.

Experience in flight-testing of civil aircraft; and knowledge of TCCA, FAA, and EASA certification requirements (ie, FAA CFR Part 25) required.

Mirabel is just outside Montreal, Canada.
 
Job Number: 2304
Job Location: Montreal/Mirabel, Canada
Rate: $63.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 01/17/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Email: tdm@tdm.ca
Website: www.tdm.ca

2nd Shift Maintenance Technician

Description:
Description:
Perform maintenance in support of manufacturing facility on a variety of equipment throughout facility including machinery repairs, preventative maintenance, machine relocation, fabrication, welding, electrical repair and installation, plumbing (air, hydraulic, water) with use of a variety of equipment.  Responsible for monitoring hazardous waste for removal, maintenance of chemical storage area and clean up of chemical spills as required.  Nontoxic or non-hazardous.  Mainly Soap and/or grease
Will be operating a crane or fork lift.
 
Responsibilities:
Provide maintenance support in all areas of manufacturing facility including but not limited to machinery repairs, preventative maintenance, machine relocation, fabrication, welding, electrical repair and installation, plumbing (air, hydraulic, water) with use of a variety of equipment such as hand tools, welding equipment, fork lifts, and precision measuring equipment.  Maintain and develop preventative maintenance program for production related equipment.  Required to perform work in compliance to all safety and EHS policies and procedures. 
 
Qualifications:
  • Knowledge of EHS procedures and policies
  • Knowledge and safe use of production related equipment
  • Working knowledge and use of welding, electrical, and plumbing equipment including repair and maintenance of machinery
  • Millwright Skills and familiar with Electrical and/or Hydraulic
  • Able to interpret OEM handbooks and/or plant diagrams
  • Understanding of reading building plans and electrical schematics
  • Ability to use trouble-shooting and precision measuring equipment
  • Where applicable, trained in maintenance processes such as but not limited to welding, plumbing, electrical and mechanical troubleshooting
  • Vocational or technical training in a maintenance related discipline, strongly preferred

 
Training requirements:

  • Demonstrated ability to comply to maintenance safety procedures such as lock-out tags, etc.
  • Demonstrate ability to safely complete job tasks utilizing manual equipment as well as use of gauges needed for repair fabrication
  • Demonstrate ability to perform preventative maintenance, and repair of facilities equipment
  • Where applicable, complete safety and maintenance training and or certification

For consideration to this position, please contact Eric Khassanov at ekhassanov@pdstech.com or 843-277-6611.
 
 


 
Job Number: 1610057656
Job Location: KS City, MO
Duration: 12 months
Input Date: 01/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Eric Khassanov
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002FgpWAAS&URLSource=cjhunter

Aeronautical Engineer / no clearance / Flight Control and Vehicle Management System skills a requirement CA

Description:
Requirement #AERO-REQ-0710
Work Location Palmdale, CA (1011 Lockheed Way)
Work Week 9/80

Needed Date 11/28/2017
End Date 11/09/2018
Number of Resources 1
No Clearance

Flight Control and Vehicle Management System skills a requirement

Title: Aeronautical Engineer

Description

Candidate will contribute to aircraft FC&VMS (Flight Controls & Vehicle Management System) design, configuration development, feasibility and risk analyses, and technology maturation plans, define, develop, analyze and coordinate FC&VMS requirements with other flight sciences disciplines including ground and flight test, reliability & maintainability, system safety, and other personnel. Develop models and simulations as needed for design and analysis. Perform trade studies and define preliminary requirements for VMS architecture components. Design mechanical and electrical/electronic interfaces to support system integration and test. Define high level software requirements and flow down requirements to procurement specifications. Tasks may also include management of selected vendors, including verification of requirements. The candidate will support system/software verification and validation effort and customer reviews during all phases of system development. The candidate will develop and support integration and system check out (SCO) procedures on flight test article and support pre-flight and post-flight analysis and reviews

Skill/Experience/Education

Mandatory:

Hardware and software integration experience Familiarity with Flight Controls and Vehicle Management Systems Demonstrated ability coordinating with systems engineering, hardware designers and subsystems
Desired:

B.S. Degree or above in an Engineering Discipline
Several years of hardware & laboratory experience MATLAB, Simulink experience


Interview Required Yes
OT Allowed Yes (OT Limitation: No)
Travel No
Non-Exempt
Rate Type Per Hour

Rates
0-4 Yrs Pay Rate: 65.00 USD
5-8 Yrs Pay Rate: 70.00 USD
9+ Yrs Pay Rate: 75.00 USD
 
Job Number: JE-0710
Job Location: Palmdale, CA
Rate: 65-75/hr DOE
Duration: 12 month contract
Input Date: 01/23/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

Airworthiness Inspector Sr

Description:
PDS is seeking a  Airworthiness Inspector Sr  for an open position in Savannah, GA.

The Senior Airworthiness Inspector physically inspects aircraft, aircraft components, and reviews related paperwork to ensure that workmanship meets acceptable standards of quality, and that customer aircraft are returned to service in an airworthy condition with all required documentation properly completed and filed. 

Essential Functions:
  1. 1. Responsible for all quality control inspections on aircraft/components in the Repair Station.
  2. 2. Completes inspections of aircraft, engine, and component repairs and alterations to ensure conformity to FAA approved/acceptable data.
  3. 3. Coordinates mechanical, electrical and inspection requirements on the aircraft during maintenance or outfitting.
  4. 4. Keeps accurate, neat and legible records of the work performed on aircraft/components.
  5. 5. Coordinates throughout assigned jobs with RTS to ensure accurate aircraft records are produced in a timely manner.
  6. 6. Conducts audits of maintenance documentation for accuracy and completion on all aircraft prior to approval for return to service.
  7. 7. Ensures aircraft/components are airworthy prior to any flight activities.
  8. 8. Mentors technicians on effective documentation. 


Additional Functions:

  • Accomplishes research of Aircraft Log Books and or computer maintenance programs to identify ongoing inspection programs, status of aircraft within those programs, airworthiness Directive status, and Service Bulletin status.
  • Continually monitors repair station compliance with FAR Part 145 and the FAA accepted site Repair Station and Quality Control Manual.
  • Assists leads and supervisors in training of Airworthiness Inspectors. Promote high standards of quality through instruction and by setting the example.
  • Works with and instructs subordinate mechanics/technicians in troubleshooting and operational/functional procedures.
  • Signs FAA 8130-9 Statement of conformity on projects completed on his/her aircraft.
  • May perform ODA functions as assigned.
  • In support of aircraft certification and final phase testing, may include flight tests on aircraft as required.
  • Performs other duties as assigned. 


For Additional Information on this Opening Please Contact
Kellye Roberts
Direct Number: 912-257-4867
Email Your Updated Resume to
kroberts@pdstech.com

Education and Experience Requirements:



  • High School graduate/GED. Airframe and Powerplant License required.
  • Six (6) years aircraft/component inspection experience to include (3) years experience on large or mid-size aircraft.

Other Requirements:

  • Proficient in the utilization of Federal Aviation Regulations, FAA forms and documents.
  • Proficient in blueprint reading, use/interpretation of Maintenance Manuals, test specifications and other inspection related documentation as required.
  • Familiar with FAA certification approval processes.
  • Strong written and verbal communication skills. Must be able to effectively prioritize tasks.
  • Strong computer skills. Proficient with Microsoft Word. Minimum 20 WPM typing speed.


Unique Skills:



  • Must be able to support AAP on extended or alternate shifts and weekends.


For Additional Information on this Opening Please Contact
Kellye Roberts
Direct Number: 912-257-4867
Email Your Updated Resume to
kroberts@pdstech.com

 
Job Number: 1710067773
Job Location: Savannah, GA
Duration: 6 months
Input Date: 01/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Kellye Roberts
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000012Yk7AAE&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Applications Engineer Vice Installation

Description:
UNIQUE SKILLS
Candidate must have In depth knowledge of electrical harness installation and design guidance documentation (AC 43.13B, SAE AS50881, AC1701-1); In-depth knowledge of FAR 25 sub part H (EWIS) design requirements; Knowledge of EWIS component qualification requirements and documentation (EIA 364, MIL-DTL-38999, MIL-DTL-50151); Extensive knowledge of EWIS component selection criteria; experience with Mentor Graphics Capital Harness System (CHS) preferred Education/Experience: Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs. in the specific technical discipline or 10 yrs. broad engineering experience in several technical disciplines with Bachelors, or 3 yrs. in the specific technical discipline with Masters, or 1 yr. in the specific technical discipline with PhD. Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the production of Client products and services.

PRINCIPAL DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

ADDITIONAL FUNCTIONS
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

OTHER REQUIREMENTS
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 17-785-100301
Job Location: Southeast
Rate: $58.00 to $63.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 01/08/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

Assembler \'A\' (3) - FL

Description:
Chipton-Ross is seeking an Assembler 'A' (3) for an opening in St Petersburg, FL.

Under minimum supervision, performs a wide variety of electronic and electro-mechanical subassembly and assembly operations of a semi-skilled nature to build up and assemble difficult and complex units such as power supplies, modules, chassis drawers, cable harnesses, electronic systems and subassemblies. Determines methods and sequence of assembly operations where complete information is not readily available or follows assembly shop and production operation sheets, wire lists, samples, blue prints, schematic and verbal instructions to perform a wide variety of assembly operations such as wiring, component installation and hand soldering. Must be able to perform the essential duties and responsibilities with or without reasonable accommodation. The duties and responsibilities may change from time to time without notice and include but are not limited to the duties described below.

RESPONSIBILITIES:
Performs complex wiring, soldering and assembly of subassemblies and final assemblies.
Reads and interprets complex wiring diagrams, color codes, schematics and wire lists.
Builds harnesses of high complexity.
Terminates various multi-conductor and coaxial cables.
Utilizing a high degree of proficiency, wires and solders various components within circuits and chassis.
Performs mechanical assembly of high complexity chassis and cabinets.
Occasionally employs basic knowledge of electrical theory and its application to basic wiring and testing using voltage and ohmmeters.
Disassembles, modifies, reworks, refurbishes, reassembles and tests units as required.
Sets up and operates automatic and semiautomatic assembly equipment.
May be required to perform continuity checks and rework.
Complies with ISO procedures and regulations. Maintains a safe and clean work area. Complies with company policies and guidelines regarding inventory control and timekeeping.

REQUIRED EXPERIENCE:
Must be proficient with all hand tools, basic mechanical inspection equipment such as calipers and indicators and electrical test equipment such as multimeters.
Must be proficient in soldering techniques, color codes and component identification.
Must be able to perform assembly calculations with accuracy.
Must be ability to read blueprints and work with small parts.
Requires understanding of concept of Work Orders and Bills of Materials.
Must be able to follow verbal instructions or procedures.
Must have knowledge of computer usage specifically Microsoft Office applications.
Communication skills are required for effective interface with all contacts.

EDUCATION:
High School or technical trade school graduate preferred, or training in military service graduate.

ADDITIONAL EXPERIENCE:
Requires a minimum of five (5) years of progressively difficult related electro/mechanical assembly and wiring experience.

WORK HOURS:
9/80, Full-Time
 
Job Number: 165634
Job Location: St. Petersburg, FL
Rate: Up to $16.75 DOE
Duration: 5 Months
Input Date: 01/23/2018
Firm Name: CHIPTON ROSS
Attention: Christian Martinez-Salceda
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: cmartinez@chiptonross.com
Website: www.chiptonross.com

Assembly Operator - AZ

Description:
Chipton-Ross is seeking an Assembly Operator (Potting) for an opening in Tempe, AZ.

The Assembly Operator's primary function is to perform a variety of tasks to assemble potted modules that meet all specifications and that only quality product moves forward. The ideal candidate must be able to multitask in a manufacturing environment for the purpose of assembling or inspecting night vision assemblies against set criteria with collected data for use in the production and compliance assurance of image tubes.

All of the work will be performed in an environment that requires prolonged sitting or standing.

RESPONSIBILITIES:
Ability to work with small fragile parts
Ability to follow work instructions and make operation entries on computer terminals
Microscope and inspection experience
Use of hand tools and specialized testing equipment
Participate in process improvements
Keep work area orderly and clean
Teamwork oriented
Work with engineering and engineering technicians
Perform other duties as assigned

REQUIRED EXPERIENCE:
1 to 2 years related work experience
Previous ISO environment experience
Attention to detail
Knowledge of all safety (mechanical, chemical, electrical) procedures applicable to the job
J-STD solder certification and/ or experience preferred
Lean manufacturing principles and 5-S
Computer experience required and Microsoft literacy preferred

ADDITIONAL EXPERIENCE:
Must be able to read, write and communicate clearly and effectively in English
Must be able to work overtime as required

EDUCATION:
Accredited High School Diploma/GED

WORK HOURS:
Friday Ending, 2nd Shift, Full-Time
FWO

 
Job Number: 166366
Job Location: Tempe, AZ
Rate: Up to $14.00 DOE
Duration: 1 Month
Input Date: 01/23/2018
Firm Name: CHIPTON ROSS
Attention: Erin Simmons
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: esimmons@chiptonross.com
Website: www.chiptonross.com

Assembly Tech Wheel and Brake Shop

Description:
PDS Tech, Inc. is seeking an Assembly Technician for an open position in Dallas, TX
Description:

Role and Responsibilities:
****FAA/DOT/Safety Sensitive Position****

  • The Assembly Tech I, disassembles, cleans, and assembles aircraft wheels, brakes, batteries and/or hose assemblies to product specifications and uses hand tools and small power tools to assemble units..



     



  • Receives and prioritizes orders; reserves materials; assembles product. 



  • Creates and closes work orders; answers calls; assists other technicians as needed. 



  • Order entry into system; updates as needed. 



  • Prepares and ships materials (hazardous and/or non-hazardous).



  • Completes special projects and other duties as assigned.




 
Qualifications and Education Requirements:
REQUIRED
  • H. S. Diploma  or  Equivalent
  • Aviation experience or Minimum 2 years of Mechanical experience
  • Ability to use various hand Tools
  • General electrical/mechanical experience in the aviation industry

 
 
Job Number: 1710074066
Job Location: Dallas, TX
Per Diem: No
Duration: 2 months
Input Date: 01/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Richard Escobar
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023HmcAAE&URLSource=cjhunter

Assembly Technician- Electrical Integration

Description:
PDS Tech is seeking an Integration Specialist Technician for an open position in Huntsville, AL.
In your role, you will:
*** 
Need to be able to perform Wire harness assembly integration, install instrumentation including Strain Gauges
  • Perform assigned duties as an individual or as a member of a crossfunctional High Performance Work Team (to include supplier and customer representatives), during all phases of assembly, integration and test from developmental prototyping to the execution of production integration activities. Meet customer satisfaction requirements for quality, performance and reliability.
  • Perform functional checkouts and system testing of electrical, electronic, mechanical systems and ground support equipment. Troubleshoot, fault isolate and document nonconformances to correct malfunctions, to component level, with minimal technical support. Perform, as required, approved rework, modification, repairs and incorporation of changes per technical documentation and formal direction to electrical, electronic and mechanical systems.
  • Assist in defining, implementing, completing and monitoring the execution of the work scope. Make recommendations for refinement to equipment and integration processes by conducting studies and evaluations that result in product and process improvements.
  • Analyze product, process & test data, and rejection history to identify root cause for problems and assist with developing corrective action.
  • May be required to perform duties in and around ordnance or other hazardous materials while maintaining a safe working environment. May be required to obtain a security clearance, per specified program requirements.
  • Perform all elements of mechanical, electrical and electronic assembly, integration and test from detail fabrication, buildup of assemblies & subassemblies, through final integration.
  • Select correct parts, materials and tools to perform assigned duties. Duties may include the handling of hazardous waste (if qualified). Handle and protect components and assemblies in accordance with proper practice and procedures.Move materials from place to place within the work area.
  • Perform critical handling tasks and operate special electrical, electronic, mechanical and support equipment. Use and operate shop tools and equipment including precision measuring instruments and equipment including optics and lasers. Operate various types of shop equipment such as band saw, drill press, sander, bench grinder, metal bending equipment and other related machinery on a variety of materials.
  • Perform assembly work to complete assignments. Related tasks may include fabrication, installation, adjustment, fit check, fastener alignment, connections, and subassembly integration of parts and materials.
  • Perform chemical cleaning, surface finishing, painting, marking in accordance with specifications and procedures.
  • Use any electrical and electronic test equipment, instruments and tools required to perform assigned work, including precision measuring instruments and equipment. Connect, operate and/or verify support equipment, set up and check out of electrical, electronic and mechanical systems.
  • Troubleshoot, fault isolate and document nonconformances.
  • Perform related rework and approved repair necessary to accomplish assignments
  • Devise, develop and assemble approved shop aides and devices that may be required to adjust, test or maintain electrical and mechanical systems equipment.
  • Perform self examination and inspection as certified and required.
  • Plan, sequence and organize work operations to meet production schedules and expedite special jobs.
  • Coordinate information to advise others of situations or conditions that will delay work progress and suggest corrective action.
  • Assist others in the performance of their assigned work giving technical assistance to specifications and requirements as required.
  • Set up and maintain charts, logs, records and reports.
  • Maintain licenses, permits and certifications required to perform assigned work.
  • Perform other duties as assigned within the general job classification
  • Maintain a safe clean and orderly work area.

High School Diploma or GED
 
Job Number: 1710072532
Job Location: Huntsville, AL
Duration: 6 months
Input Date: 01/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Enrique Perez
Address: 3201 CHERRY RIDGE DR STE A103
City, State: SAN ANTONIO, TX 78230-4824
Phone: 210/524-1496
800 Phone: 866/570-1503
Email: cecjsanantonio@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023B8GAAU&URLSource=cjhunter

Aviation Mechanics - Clearance

Description:
Seeking Experienced Aviation Mechanics for a contract opportunity in San Antonio, Texas!

Work to be performed on a VIP aircraft, 747 platform and active Top Secret Clearance Required.
Several Openings For:
  • General Mechanic
  • Electrical
  • Structures
  • Avionics Tech
  • Quality Inspection
  • Supply Chain Specialist


Great Opportunity for Ex-military/Exiting Military/ and Veterans
Previous military experience a plus!


 
Experience performing routine maintenance, modifications, and rework on VIP - 747 aircraft.
Required- Minimum of 5 years' experience working on 747 platform.
Tools: no tools required
Location: San Antonio, Texas

***Current Security Top Secret Clearance required
US Citizenship Required: Clearance requirements will be used during resume screening. Individuals must hold a current Clearance or Equivalent Clearance/ investigation type to be considered for this position, clearance level must be noted on the resume. Must follow submittal procedures below for consideration. No phone calls please, only candidates that provide resumes with the job ID number will be contacted and considered for the opportunity.

**submittal must reference Job ID number 1710063637

Camille Zunker- czunker@pdstech.com
 
Job Number: 1710063637
Job Location: San Antonio, TX
Duration: 12 months
Input Date: 01/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Camille Zunker
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002GBZ0AAO&URLSource=cjhunter

Avionics Consulting DER

Description:
PDS is seeking an Avionics Consulting DER for an open position in Wichita, KS.
Make compliance findings and represent the company as a subject matter expert to certification authorities, suppliers, and industry consortiums in the area of avionics systems approvals supporting aircraft Type Certification for both foreign and domestic certification activities on 14 CFR Part 23/25 aircraft

In your role, you will:
  • Responsible for design, development and certification support of avionics systems on Citation aircraft. 
  • Prepare and/or approve certification plans, conformity requests, equipment qualification test plans/results, system safety documents, ground and flight test plans/results and certification reports showing avionics systems compliance with 14 CFR Part 23/25. 
  • Reviews engineering drawings for avionics systems prepared using computer based drafting tools (IAI HarnesSys, CATIA/CCD and /or CATIA V5). 
  • Evaluate and analyze avionics systems design for completion of function hazard assessments and system safety assessments.
  • Assist in development of functional test documents for avionics systems.
  • Witness equipment, system, and aircraft ground testing at Cessna, Supplier or other testing facilities.
  • Support investigation, root cause analysis, corrective action, and ODA/FAA coordination of aircraft field issues and component failures when warranted for certification concerns.
  • Coordinate with FAA personnel and other Cessna Engineering disciplines such as Air Worthiness, Project, Flight Test, Aerodynamics, Propulsion, Mechanical Systems, ECS and System Safety.

Qualifications
QUALIFICATIONS/EDUCATION/SPECIAL REQUIREMENTS:

  • Minimum of 5 years avionics system design integration experience to the requirements of 14CFR Parts 23/25 is required for applicants meeting the education requirements above.Minimum of 9 years avionics system design integration experience for those not meeting the education requirements.
  • Must have 2 years prior certification experience with Federal Aviation Regulations 14 CFR Part 23/25 as an Avionics Systems DER, DOA AR or ODA Unit Member.
  • Experience with the application of RTCA DO-160, DO178 and DO-254 relative to avionics systems certification on aircraft is required.
  • Electronic drafting experience with IAI HarnesSys and/or CATIA/CCD is desired.
  • Experience with the System Safety certification process per SAE ARP4754 and ARP4761 is desired.
  • Must be able to coordinate, communicate and develop good working relations with FAA specialists.
  • Experience with use of electronic test equipment is desired.
  • Design knowledge of electrical bonding criteria, thermal cooling requirements for electronic equipment, EMI shielding, and High Intensity Radiated Fields (HIRF) / Indirect Effects of Lightning (IEL) installation criteria is desired.

Education:         
B.S. or advanced degree from an ABET accredited institution in Computer, Electrical Engineering or Engineering Technology is preferred.  Will consider applicants with 14 CFR Part 23/25 DER/DOA AR/ODA Unit Member avionics certification experience in lieu of a degree
 
For immediate consideration send your resume to cecjwichita@pdstech.com or
Call 316-729-1800 today!!

 
Job Number: 1710073247
Job Location: Wichita, KS
Per Diem: Yes
Duration: 6 months
Input Date: 01/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Jorge Garcia
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023FskAAE&URLSource=cjhunter

Avionics Electrical Engineers

Description:
Jets experience a plus
 
Job Location: Midwest
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: jmac@advancedtechno.com
Website: www.advancedtechno.com

Avionics Electrical Engineers

Description:
Jets experience a plus
 
Job Location: Southeast
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: jmac@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer III / Instrumentation / CREO / MODELCHECK / Harness cable electro-mechanical packaging CA

Description:
7356312
Job Title: Avionics Engineer III / Instrumentation

Number of Positions: 1

Remaining Positions: 1

Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **




** Candidates should have experience with Creo Parametric and Creo Cabling. Experience with Creo Schematics; Windchill; and Modelcheck preferred **



-Support Electro-Mechanical Packaging of complex electrical/electronic assemblies.

-Extensive knowledge of electronic packaging design for harsh environments, with Aerospace and/or military experience.

-Experience is design of cables and harnesses for applications for Aerospace products.

-Proficiency in use of Creo PDM/Link and Windchill.

-Additional proficiency with GD&T and tolerance analysis.



Skills:
Prior experience and detailed knowledge of Windchill PDMLink 10.1 or greater
Previous experience with MODELCHECK preferred
Proficiency with Creo Parametric 2.0 (or greater) with extensive knowledge of:
Large Assembly Management, Simplified Representations, Combination States
Top Down Design with Skeletons including Publish Geometry, Copy Geometry, and Shrinkwraps
Mechanism Design
Advanced part modeling techniques including the use of relations, analysis features, and flexible components
Experience with Creo Cabling including
Utilizing logical reference data (automated routing)
Harness flattening using Creo Harness-MFG extension
Working knowledge of Creo Schematics 2.0 desired including:
Block Diagram to Wiring Diagram Schematic Development (aka “BID to WID”)
Diagram creation utilizing a Central Catalog

Education:
BSME with 10 years of experience or 15 + years of equivalent experience

Skills:
Required

AVIONICS INSTRUMENTATION CREO WINDCHILL GEOMETRIC DIMENSIONING GEOMETRIC TOLERANCING

State/Province: California
City/Town: Canoga Park

Start Date: 11/06/2017 Hours Per Week: 40.00
Est. End Date: 05/06/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7356312
Job Location: Canoga Park, CA
Rate: 49/hr max
Duration: 6 month contract
Input Date: 12/19/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer III/Instrumentation

Description:
Avionics Engineer III / Instrumentation
Canoga Park, CA
Rate: $45-$49


Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **




** Candidates should have experience with Creo Parametric and Creo Cabling. Experience with Creo Schematics; Windchill; and Modelcheck preferred **



-Support Electro-Mechanical Packaging of complex electrical/electronic assemblies.

-Extensive knowledge of electronic packaging design for harsh environments, with Aerospace and/or military experience.

-Experience is design of cables and harnesses for applications for Aerospace products.

-Proficiency in use of Creo PDM/Link and Windchill.

-Additional proficiency with GD&T and tolerance analysis.



Skills: •Prior experience and detailed knowledge of Windchill PDMLink 10.1 or greater ◦Previous experience with MODELCHECK preferred

•Proficiency with Creo Parametric 2.0 (or greater) with extensive knowledge of: ◦Large Assembly Management, Simplified Representations, Combination States
◦Top Down Design with Skeletons including Publish Geometry, Copy Geometry, and Shrinkwraps
◦Mechanism Design
◦Advanced part modeling techniques including the use of relations, analysis features, and flexible components

•Experience with Creo Cabling including ◦Utilizing logical reference data (automated routing)
◦Harness flattening using Creo Harness-MFG extension

•Working knowledge of Creo Schematics 2.0 desired including: ◦Block Diagram to Wiring Diagram Schematic Development (aka “BID to WID”)
◦Diagram creation utilizing a Central Catalog


Education: •BSME with 10 years of experience or 15 + years of equivalent experience
 
Job Number: 8082
Job Location: Canoga Park, CA
Rate: $45-$49
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 12/18/2017
Firm Name: INCONEN CORPORATION
Attention: Cathy O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Avionics Installer- 2nd shift

Description:





PDS TECH INC is currently looking for Avionics Installers for our customer in Long Beach

If you are interested and available, please call Karla Pelonis (800) 234-8644 x 20210 and forwarded your updated resume to kpelonis@pdstech.com

 



Avionics installation or maintenance history required. Computer literate required. 



Education and Experience Requirements:



High School diploma/GED. Knowledge of applicable regulatory requirements and customer specifications. Two (2) years of accredited schooling in aviation electronics or two (2) years related work experience. Ability to read and interpret basic blueprints and schematic diagrams.


Position Purpose:



Under minimal supervision, assists in the removal/installation of avionics electrical components, fabrication of wire harnesses, installations, terminations, ring-out, and functional tests of avionics/electrical systems. 

Principal Duties and Responsibilities:

Essential Functions:
1. Assists in installations, modifications, and the fabrication of wiring and electrical components, fixtures, and associated equipment in accordance with blueprints, worksheets, engineering drawings. 2. Maintains required logs and records.
3. Completes tasks within allotted time frame.
4. Ensures that work accomplished meets applicable regulatory requirements and customer specifications.
5. Checks all work and ensures a defective free assembly prior to final inspection.
6. Complies with the company FOD program, tool control program, 5-S program and all safety regulations.
7. Maintains a neat and orderly work area. 

Additional Functions:
1. Properly care for and maintain shop equipment and tools as assigned by Supervisor.
2. Participates in continuous improvement activities (e.g YIAW, Kaizen events, etc.)
3. Performs other duties as assigned. 

Other Requirements:
1. Strong written and verbal skills required.
2. Computer skills and general software knowledge necessary.





 





 
Job Number: 1710073124
Job Location: Long Beach, CA
Per Diem: Yes
Duration: 12 months
Input Date: 01/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Karla Pelonis
Address: 3130 S HARBOR BLVD STE 100
City, State: SANTA ANA, CA 92704
Phone: 714/540-7900
800 Phone: 800/234-8644
Fax Phone: 714/540-8092
Email: cecjcostamesa@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023FS4AAM&URLSource=cjhunter

Avionics Tech

Description:
PDS Tech is seeking an Avionics Technician for an open position in  Wichita, KS
In your role, you will:

Job Details:

  • Identify malfunctions, remove, repair and install a limited variety of aircraft communication, navigation, avionics, and electrical components.
  • Perform analysis of routine electrical and avionics malfunctions according to standard shop practices using some equipment such as voltmeters, ohmmeters and continuity lights.
  • Perform minor repair such as replacing wires and connectors on standard electrical components, removing, repairing, and re-installing avionics equipment.
  • Under guidance of supervisor, assist with analysis of more complicated malfunctions and repair of standard avionics and electrical components.
  • Install electrical, avionics, and electronic components as directed.


 

Job Requirements:
  • A.A.S. in Electronics/Aircraft Avionics or equivalent formal training
     
    Position Requirements:
     
    Broad training and fundamental skills for hands on avionics/electrical troubleshooting of aircraft systems.
    Ability to deal with change and work in a dynamic environment.
    Excellent written and verbal communication skills are required.
    Professional demeanor and organizational skills.
    Must have positive attitude and outstanding integrity.


 

 
Job Number: 1710077238
Job Location: Wichita, KS
Duration: 12 months
Input Date: 01/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Jordan Smith
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023PxUAAU&URLSource=cjhunter

Avionics/Elec Tech I

Description:
PDS Tech is seeking Avionics/Elec Tech I for open positions Savannah, GA

Assists in troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise by implementing process changes to reduce cost and meet schedule without compromising safety or quality. 

Principal Duties and Responsibilities:

Essential Functions:
1. Demonstrates basic technical skills in avionics and aircraft systems operational testing and troubleshooting. 2. Under supervision, performs the installation and functional testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system. 3. Assists in ensuring quality and efficiency of all installations. Troubleshoots processes/concepts to provide timely, quality repairs of malfunctioning systems. 4. Acquires and demonstrates the skills and knowledge required to effectively and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring. 5. Performs and complies with engineering changes and modifications as required. 6. Assists in set up and operation of necessary test equipment; conducts functional and operational tests to evaluate performance and reliability. 7. Under supervision, ensures that all work performed on the aircraft is properly and completely documented and ready for inspection. 8. Tests and maintains test equipment, electronic systems, and components. 9. Complies with the company FOD program, tool control program, 5-S program and all safety regulations. 

Additional Functions: 1. In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. 2. Performs other duties as assigned.
 

Education and Experience Requirements:


High School graduate/GED. Two (2) years related work experience; or two (2) years of accredited schooling in aviation electronics. Ability to read and interpret basic blueprints and schematic diagrams.
 

Unique Skills: A&P, FCC licenses preferred. NCATT certification preferred. Must be willing to work any shift.


 
Job Number: 1710077092
Job Location: Savannah, GA
Duration: 6 months
Input Date: 01/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Richard Escobar
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023PNFAA2&URLSource=cjhunter

Avionics/Electrical Contractor (Custom Engineering)

Description:
Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of products and services

Unique Skills:
• Must be proficient at creating design and compliance data to support after-market installations on all company models.
• Must understand FAA/ODA/Industry requirements associated with aircraft modifications.

Education and Experience Requirements:
• Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Essential Functions:
• Contributes to planning, developing and coordinating of important engineering projects
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
• Acts as liaison with representatives outside of the assigned group/area
• Actively works to improve daily processes and ensures all work meets customer requirements
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
 
Job Number: 24-213
Job Location: Savannah, GA
Rate: $58 - $63
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 01/23/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Email: matt@precisionpersonnel.com
Website: www.precisionpersonnel.com

Avionics/Electrical Contractor (Custom Engineering) TS1

Description:
Avionics/Electrical Contractor (Custom Engineering) TS1

Location: Savannah, GA
Pay Rate: $58/hr - $63/hr
Duration: Long Term W2 Contract
Shift: First

Unique Skills:
Must be proficient at creating design and compliance data to support after market installations on all Company aircraft models. Must understand FAA/ODA/Industry requirements associated with aircraft modifications.

Education and Experience Requirements:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

Principal Duties and Responsibilities/Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 8220
Job Location: Savannah, GA
Rate: 58.00-63.00
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 01/17/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: rex@inconen.com
Website: www.inconen.com

Cabin Safety Engineer V&V

Description:
Velocity’s client, an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM’s, is seeking multiple Cabin Safety Engineers. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.
Seeking contract engineers to join the team in Seattle with at least five years’ experience with cabin safety engineering, to include:
• Experience and knowledge of FDMS & Water Waste Interior Systems (OEM level preferred)
• Experience with requirements writing at aircraft/systems level
• Experience validating requirements (completeness and correctness) and developing verification matrix (plan and results)
• Familiar with requirements definition, traceability, validation and verification process.
• ARP4754A knowledge and experience
• Proficient at DOORS or similar requirement management tool.
Essential functions:
• System requirements verification and validation.
• Flight test and ground test specifications.
• Support flight test and ground test activities.
• Analyze test data and evaluate system operation.
• Prepare test reports.
Desired Qualifications:
• Experience with FAA Part 25 or Part 23 certification, flight and ground test activities.
• Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
• A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
• Ability to represent the client professionally and positively during client interactions and meetings.
• Bachelor degree in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
 
Job Location: Moses Lake, WA
Start Date: ASAP
Input Date: 01/16/2018
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Email: smcglinsey@velocity-cs.com
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Certification Engineer

Description:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of products and services

Unique Skills:
• Must be proficient in certification & compliance documentation creation. (For example Certification Plans, Ground Test Plans, Instructions for Continued Airworthiness, Airplane Flight Manual Supplements, etc.)
• Must a have at least 10 years of Avionics/Electrical Systems design/integration experience.

Education and Experience Requirements:
• Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required.
• 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Essential Functions:
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Is consulted extensively by associates and others as a recognized authority within the field
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
• Approach to problem solving balances technical product, cost and schedule
• Works without appreciable direction; work is reviewed from a long-range perspective for desired results
• Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.
 
Job Number: 24-210
Job Location: Savannah, GA
Rate: $50.00 - $55.00
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 12/08/2017
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Certification Engineer Custom Engineering

Description:
Certification Engineer Custom Engineering

Location: Savannah, GA
Pay Rate: $50/hr - $55/hr
Duration: Long Term W2 Contract
Shift: First

Unique Skills:
Must be proficient in certification & compliance documentation creation. (i.e. Certification Plans, Ground Test Plans, Instructions for Continued Airworthiness, Airplane Flight Manual Supplements, etc.) Must a have at least 10 years of Avionics/Electrical Systems design/integration experience.

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Company products and services

Principle Duties and Responsibilities/Essential Functions:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
Languages Required (in addition to English): English
 
Job Number: 8138
Job Location: Savannah, GA
Rate: 50-55
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 12/11/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Chemical Engineer

Description:
Chemical Engineer
Location: Tulsa, OK
Duration: 12+ months
Rate: Open, DOE
Chemical Engineer Summary Statement:
Applies extensive knowledge of principles, theories and concepts related to Chemical Engineering.
Chemical Engineer Essential Functions and Key Responsibilities:
Develops solutions to a variety of problems of moderate scope and complexity.
Solves unusual problems that require moderate ingenuity and innovation related to chemical engineering, chemical formulations and manufacturing processes. Work is accomplished under general management direction. Applies extensive knowledge of chemistry and chemical engineering to design and develop transparency related aircraft products for military, executive, general aviation, or special purpose applications on operational aircraft. Researches and develops new and improved chemical manufacturing processes. Designs chemical plant equipment and devises processes for manufacturing. Determines most effective arrangement of operations such as mixing, conditioning, application, and testing of related polymer products. Develops, implements, and maintains chemical processes;calculates and organizes all data for complex process flow sheets including instrumentation and control considerations; models processes and units operations. Confers with management to ensure proper sequence of operation and prepares specifications and operating instructions for processing equipment. Services, troubleshoots, and solves engineering problems with processes or equipment already in operation. Ensures processes and procedures are in compliance with regulations.
Conducts tests and measurements throughout stages of production to determine control over such variables as temperature, density, pressure and viscosity. May function as Project Manager on large projects or significant portions of very large projects. Provides technical leadership and oversight to the assigned engineering staff. May represent the Company to current or prospective customers or vendors on technical matters related to the job assignment or technical specialty.
Chemical Engineer Ancillary Job Functions and Responsibilities:
Perform other duties as required. These duties may include assignments in job classifications other than the primary assignment.
Chemical Engineer Job Qualifications:
Formal Education, Training, Professional Certification and
Chemical Engineer Work Experience:
Experience may be substituted for the formal education and training requirements in this section at the discretion of management. Technical Bachelor level degree in Engineering or the sciences or equivalent and six(6) years related experience and /or training; or equivalent combination of education and experience.
Level of Supervision Required:
Works under general direction. Receives guidance as to results expected and to resolve complex problems. Exercises latitude in determining activities and approaches within moderate to wide parameters. Standard Job Requirements:
•Must be able to arrive at work on time, work on-site, and attend regularly.
•Must be able to read and write technically in the English language, perform appropriate mathematical calculations and learn to interpret and comprehend company policies, procedures, safety instructions, and other like documents used in an aerospace manufacturing environment.
•Competent in the use of standard software applications such as Microsoft Word and Excel and operate standard office equipment.
•Make telephone and direct personal contact with internal and external personnel and make formal presentations
Chemical Engineer
.•May perform work of lesser skilled employees.
Special Job Requirements:
Experience and working knowledge of the following:
•Polymerization and casting of liquid methyl methacrylatemonomer
•Catalysts and cross-linking agents
•Filtration of liquid monomers
•Mechanical properties testing of polymers
•Adhesion promoters and surface primers
•Polymer coating so Polysiloxane and other protective coating so Electrically-conductive coating so Optical coatings for projection screens. Special Training:
•Safety training applicable to the job and the general work area.
Physical Requirements:
While performing the duties of this job, the Stakeholder is regularly required to sit; use hands to finger, handle, or feel; and talk and hear. The Stakeholder frequently is required to move from one place to another and reach with hands and arms. The Stakeholder must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, and ability to adjust focus. Travel between facilities. Must be able to work in excess of eight (8) hours per day and five (5) days per week, if required. Must be able to ascend and descend stairs. Work Environment :Must be able to tolerate exposure to dust, fumes, noise, temperature and other elements in the shop area, if required. The noise level in the work environment is usually moderate.
Mental Requirements:
Able to work as a team member, highly organized, work well under stress and handle multiple priorities. Must possess interpersonal and communication skills to interact with other people inside and outside the company.
The Structures Company, LLC is an AA/EOE.
 
Job Location: Tulsa, OK
Rate: "open"
Per Diem: yes
Overtime: "possible"
Duration: 12+ month
Start Date: asap
Input Date: 12/04/2017
Firm Name: STRUCTURES COMPANY LLC
Attention: Mark Sharp
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

Circuit Card Assembly Specialist

Description:
PDS Tech Inc. is seeking Circuit Card Assembly Specialists for an expanding program in Huntsville, AL.
  • Performs all Circuit Card production assembly operations on electronic/electrical assemblies and subassemblies.
  • Performs simple rework and modification to circuit card parts and assemblies.
  • Provides maintenance on machines and tooling and machine set up tasks to prepare machines for production activity following the machine inspection checklists.
  • Documents results in accordance with applicable procedures.
  • Collects and inputs data for statistical process control analysis.

Work related skills equivalent to 3 years of circuit card related technical experience
Associates (2-year) degree in electronics, mechanical or other technical discipline 

Basic Manufacturing Skills

Basic Electricity

Circuit Card Assembly (CCA) experience

J-standard soldering certified

 
 
Job Number: 1710072262
Job Location: Huntsville, AL
Duration: 12 months
Input Date: 01/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Enrique Perez
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023APlAAM&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Circuit Card Assembly Specialist 2017-4708

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Circuit Card Assembly Specialist
(U.S. Citizenship Required*)
Must be able to work any shift
Huntsville, AL
2017-4708


Responsibilities:
• Performs all Circuit Card production assembly operations on electronic/electrical assemblies and subassemblies as an individual or as a member of a cross-functional, high performance work team.
• Performs simple rework and modification to circuit card parts and assemblies per requirements.
• Provides maintenance on machines and tooling and machine set up tasks to prepare machines for production activity following the machine inspection checklists.
• Documents results in accordance with applicable procedures.
• Collects and inputs data for statistical process control analysis.
• Perform CCA work using detail work instructions & other released planning documentation and a variety of other supporting technical documentation as required including but not limited to: CCA technical drawings, 2D & 3D models, schematics, circuit/wiring diagrams, process and equipment specifications, photographs, illustrations, and sketches.
• Perform all elements of CCA assembly, integration from detail fabrication to buildup of circuit card assemblies.
• Perform assigned work using any electrical and CCA related electronic test instrument, test equipment, measurement tool, required to trouble shoot at the CCA component level.
• Document CCA non-conformances down to component level. Perform, as required, approved CCA rework, modification, repairs and incorporation of changes per CCA technical documentation and formal direction to electrical, electronic and mechanical systems.
• Assist in defining, implementing, completing, and monitoring the execution of the work scope.
• Make recommendations for refinement to CCA equipment and integration processes by conducting studies and evaluations that result in product and process improvements.
• Analyze CCA product, processes, test data, and rejection history to identify root cause for problems and assist with developing corrective action.

Qualification:
• Basic Manufacturing Skills
• Basic Electricity
• Circuit Card Assembly (CCA) experience
• J-standard soldering certified
• Space addendum certified

*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
Work related skills equivalent to 3 years of circuit card related technical experience or a 2-year degree in electronics, mechanical or other technical discipline (or a minimum successful completion of all electronic courses contained with a 2-year electronics technical degree curriculum).

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!



TO APPLY, PLEASE VISIT OUR WEBSITE:
 
Job Number: 2017-4708
Job Location: Huntsville, AL
Duration: 6 Months
Input Date: 12/04/2017
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: https://careers-moseleytechnical.icims.com/jobs/4708/circuit-card-assembly-specialist/job?mode=view
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

Commodity Manager - WI

Description:
Chipton Ross is seeking a Commodity Manager in Milwaukee, WI.

Job Description:
As Commodity Manager, act as a project manager, leading cross-functional resources in key strategic sourcing and operation excellence initiatives with project accountability for the strategic sourcing function. Leverage your previous experience to develop and manage annual, multi-year commodity strategies and objectives along with optimizing total material cost and return on procured assets. Develop a global sourcing strategy consistent with corporate strategic objectives to secure supplier selections based on organizational requirements.

Responsibilities:
Working closely with the broader Sourcing Organization, including both the Global Business Unit and Corporate Commodity teams, develop and administer, on a global multi-plant wide basis, dependable and progressive sources of supply, managing optimal procurement arrangements/methods for consolidated commodity requirements driving year over year cost reductions and utilizing life cycle procurement where applicable.
As a collaborative partner, ensure that suppliers are rated consistently and fairly, ensure timely feedback to suppliers regarding performance, and that collaboration and communication is effective between suppliers and the broader business. Interact with New Product Development teams to ensure early design involvement into new products.

Act as a consultative resource to all Front-Line Care global locations on New Product Development to include support with financial budgeting, technology research, supplier liaison and full support, start to finish, for prototype/production integrations ensuring a supply base that compliments and exceeds needed technologies and directives. Utilize sourcing experience to provide leadership to internal stakeholders, external suppliers and customers by establishing team involvement and proactive feedback.

Be the primary contact for key suppliers within your commodities and develop a working relationship that drive a reliable supply chain and competitive prices.

Support a broad range of commodities including but not limited to Mechanical (plastics, metals, packaging) electronics (PCBAs, Cables/Wire Harnesses, Displays, Batteries) and several SG&A, Capital or expense related commodities when necessary.

Requirements:
o Mechanical / Electrical commodity experience and/or strong technical aptitude relating to these categories required.
o Proven success in negotiating contracts that deliver robust supply chain solutions and tangible cost savings on an annual basis.
o Excellent interpersonal and communications skills
o Experience with Mexican, European, and Asian supply chain partners
o Ability to interact with all levels of the organization.
o Ability to lead a cross functional commodity team by clearly defining duties, performance objectives and deliverables.
o ISM, CPM, APICS or CPIM certification is desirable, not required.
o SAP knowledge desired, not required.
o Travel 10% domestically and internationally.

Education:
o Bachelor's Degree in Supply Chain Management,
Engineering or related discipline.
Schedule: Full Time


 
Job Number: 166109
Job Location: Milwaukee, WI
Rate: $44.12 to $51.47 DOE
Duration: 6 months
Input Date: 01/23/2018
Firm Name: CHIPTON ROSS
Attention: Patricia Padilla
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: ppadilla@chiptonross.com
Website: www.chiptonross.com

Completions Electrical Design Engineer

Description:
• Experience with Aircraft Cabin Interiors and Systems to include but not limited to: Cabin Management System, Cabin Entertainment System, Cabin Lighting, Cabin Switch Controls, Telephone System, Satellite communications, Water System, Waste System, EWIS, Cabin interior monuments and Seats
• Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Essential Functions:
• Contributes to planning, developing and coordinating of important engineering projects
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
• Acts as liaison with representatives outside of the assigned group/area.
 
Job Number: 24-183
Job Location: Savannah, GA
Rate: $58 - $63
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 01/23/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Email: matt@precisionpersonnel.com
Website: www.precisionpersonnel.com

Components Engineer - Level 2 - TX - C

Description:
Chipton-Ross is seeking a Components Engineer - Level 2 for an opening in Dallas, TX.

RESPONSIBILITIES:
Contributes to successful project completion by participating in the resolution of issues such as conflicting design requirements, unsuitability of standard material, and difficult coordination requirements. Plans and conducts the analysis, inspection, design, test, and/or integration to assure the quality of products or components. Performs quality engineering reviews of design documentation for compliance with stated requirements, including vendor quality manuals and company quality records. Applies statistical process control (SPC) methods for analyzing data to evaluate the acceptability of components.

REQUIRED EXPERIENCE:
Must be willing to accept a wide variety of work assignments supporting the total end-to-end process of capturing, designing, developing, testing, manufacturing, and life-cycle support of electronic systems. Responsible for the performance of detailed part level obsolescence management consisting of monitoring BOM's, solving issues, scheduling and managing implementation of fixes, finding new sources, and reacting and solving issues to ensure no production line stoppages. Candidate will work closely with design engineers, interface with other functional areas and vendors, and enforce PMPCP Compliance. The candidate will periodically be required to make presentations to program management and customers.

PREFERRED EXPERIENCE:
Previous experience with obsolescence monitoring tools is a plus (i.e. Qstar, TacTech, Part Miner, Promiere) as well as expertise in all component technologies. Bachelors (or higher) Degree in Electrical Engineering, or other related technical discipline.

EDUCATION:
Accredited High School Diploma/GED

WORK HOURS:
9/80, 1st Shift

MISCELLANEOUS: Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.


 
Job Number: 164049
Job Location: Dallas, TX
Rate: Up to $75.00 DOE
Duration: 12 Months
Input Date: 01/23/2018
Firm Name: CHIPTON ROSS
Attention: Kevin Suk
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: ksuk@chiptonross.com
Website: www.chiptonross.com

Design Checker

Description:
1. Review 3D engineering data for conformance to requirements as directed.
2. Check parts for fit, form and function to the extent that information is available.
3. Must have experience in Product Lifecycle Management (PLM) processes and tools, checking CATIA v5 , SmarTeam, as well as other CAD datasets, in accordance to requirements as directed.

Checkers are responsible for determining the acceptability of data in the following areas:
1. Accuracy and completeness of engineering product definition data, including CAD and PDM data.
2. Proper application and compliance with all Engineering and customer drawing requirements.
3. Use and understanding of GD & T a must.
4. Dimensioning and tolerancing including familiarity with ASME Y14.5.
5. Application of best drafting and design practices and procedures.
6. Applies extensive and diversified knowledge of industry fabrication practices for aircraft parts.
7. Advise Design personnel regarding company drawing and design practices and procedures.
8. Maintain a current and up-to-date knowledge of developments in the structures/systems design disciplines drawing/data requirements, as well as all interrelated disciplines of design build teams.
9. Assist in the research and development of Product Data Management (PDM)/Computer Aided Design (CAD) applications and methodologies for Engineering and when necessary, other departments.
10. Actively works to improve daily processes and ensure that all Data Integrity work and CAD and PDM solutions meet customer requirements.
11. Knowledge of company parts list & PdocM, a plus.
12. Knowledge of CHS, EWIS, Electrical harness Design a plus but not required.

Essential Duties and Responsibilities
1. Checks designs of complex mechanical aircraft interior furnishing, structures, and/or systems.
2. Ensures designs meet customer criteria, quality standards and FAA requirements.
3. Adheres to budget and project schedules.
4. Provides design guidance and feedback to other engineering personnel.
5. Other duties as assigned.
6. Knowledge of industry design and documentation standards.
7. Experience with mechanical assemblies and manufacturing technique design.
8. Ability to work independently and cross-functionally.
9. Experience in communicating with employees/teams in productive and efficient manner. • Strong communication and problem-solving skills.
10. Knowledge of Excel, Share Point software, Microsoft Office a plus

Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 5 ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.
 
Job Number: 24-191
Job Location: Savannah, GA
Rate: $50.00 - $55.00
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 01/23/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Email: matt@precisionpersonnel.com
Website: www.precisionpersonnel.com

Design Engineer

Description:
Design Engineer

Independence, OH
1 Year Contract
$50.00-60.00/Hr

Summary: Reporting to the Design Lead, the successful candidate will be responsible for supporting detail design and drawing release in support of initial production. Model Based Definition (MBD) drawings shall be compatible with UTAS Landing Systems design methodologies, customer and industry/regulatory requirements and standard practices. The successful candidate will conduct trade studies, generate layouts, perform tolerance stack-ups, and detailed part design and formal drawing release.

Required Qualifications:
• BS in Mechanical or Aerospace Engineering with 8+ years of design experience with a background in mechanisms and hydraulics in aerospace field with work experience with electrical and hydraulic systems routings
• Minimum of 8 years of experience within the Aerospace industry; must include extensive experience in New Product Development of transport and / or military type aircraft components and assemblies . Knowledge of industry standard practices for systems routings. Understanding of requirements management and verification. Understanding of decomposition of system requirements and development of sub-system requirements. Understanding of qualification requirements electrical and hydraulic equipment. CATIA V5 - model based definition (FTA), kinematics, functional tolerance and annotation and drafting / interoperability. Working knowledge of Engineering PDM systems. In-depth knowledge of MS programs (Word, Excel, Project, PPT). Strong communication skills capable of engaging and working directly with suppliers. US citizen, permanent resident alien or able to review all export-controlled technical information. Experience with GD&T (ASME Y14.5) and familiar with ASME Y14.100 and Y14.41 Experience with Matrix One and SmarTeam PDM systems Working knowledge of materials and surface treatments Proficient with MS Word, Excel, and PPT
• Demonstrated ability to utilize Catia V5 with strong emphasis on functional tolerance and annotation module
• Strong interpersonal skills with demonstrated ability to maintain good working relationships with internal and external customers
• Successful candidates must meet all requirements under ITAR & CCGP
• Possess UTAS-LS Enterprise Values including Ethical Behavior, Customer Focused Improvement, Accountability & Teamwork and Openness & Trust
 
Job Number: 8266
Job Location: Indendence, OH
Rate: 50.00-60.00/Hr
Per Diem: No
Overtime: Possible
Duration: 1 Year
Start Date: ASAP
Input Date: 01/17/2018
Firm Name: INCONEN CORPORATION
Attention: Brad
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: brad@inconen.com
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer II

Description:
Position Summary: This position will work with the engineering team and will ensure the successful integration of each design element with the product as a whole. This individual will work both independently as well as part of the larger engineering team. Tasks will include the development of aircraft structural layouts and the design of individual components, assemblies, and installations. Engineering materials will include metals, nonmetals, and composite structural materials. Tasking may also include design and integration of aircraft mechanical systems, hydraulic systems, electrical systems, environmental control systems and a variety of other equipment and systems as needed. Specific duties and responsibilities include but are not limited to the following:

Essential Duties and Responsibilities:

The Design Engineer II will work with minimal intervention and must rely on experience and judgment to plan and accomplish goals while performing a variety of complex tasks in the following areas:

Applies standard engineering practices and techniques, including innovative methodology, to provide effective solutions to problems involving a wide number of variables.

Able to ensure the selection and application of materials and processes are appropriate to each design element with the ability to generate and/or revise specifications when necessary.

Compose compliance matrix to meet customer specification requirements.

In-depth knowledge of standard concepts, practices, and procedures within a specified engineering field.

Proficiency utilizing CATIA V5 engineering design software.

Works on problems of complex scope where analysis of situation or data requires a review of identifiable factors to determine appropriate action.

Ability to guide, mentor and advise other design engineering staff.

Creativity and latitude is expected.

Participate in a variety of process improvement projects.

Able to support design reviews with timely and relevant information and understanding.

Performs other duties as required.

Qualifications & Skills Requirements:

Requires a BSME, BSCE, BSAE, or a Bachelor’s degree in a related engineering field and a minimum of 5-9 years of experience in the Aerospace Industry or in a related field.
Requires proficiency using CATIA V5 and must be highly competent using MS Office products.

Physical Requirements: Individual must be able to sit for extended periods of time, working at a desk and/or attending meetings. May occasionally require employee to stand and/or walk and occasionally lift and/or move up to 10 pounds. Will need to be able to move throughout the office and talk/hear or otherwise communicate with other employees and management. Work will be performed in an office environment. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential duties of the job.

LMI is an equal employment opportunity employer. Consistent with applicable law, LMI provides access and opportunities to those with disabilities. This includes providing reasonable accommodation to individuals with disabilities and disabled veterans who seek to access the company’s online application system. If an applicant is unable to fully access the online application system, LMI will provide a reasonable accommodation. Applicants with disabilities may contact us at 636-916-2400 for assistance accessing the on-line application system. Callers should have a detailed description of the requested accommodation, their name and preferred method of contact ready for LMI‘s Human Resources Department. LMI will make every effort to respond within two (2) business days. This phone number is not for the general submission of application materials.

LMI is an E-Verify Employer.

LMI is an Equal Employment Opportunity/Affirmative Action/Disability/Veterans Employer


Click the link and follow instructions on HOW TO APPLY: LMI ENGINEERING JOB OPPORTUNITIES
 

Design Engineer, Flight Test Instrumentation

Description:
Our client in Greensboro, NC is seeking Flight Test Instrumentation Design Engineers

General Summary:
The Flight Test Instrumentation Design Engineer position is responsible for the design, development, and coordination equipment to support Flight Test operations.
 
Duties and Responsibilities:
  1. Designs, develops, coordinates, equipment, and Installations, to support Flight Test operations.  Typical equipment and installations including ballast, data booms, cockpit displays, antennas, racks, and various transducers (acceleration, pressure, temperature, displacement, etc.).
  2. Creates engineering drawings and related documents for soundness, efficiency, and simplicity in design; completeness, clarity, and dimensional accuracy; correctness of materials and processes; conformity to design/drafting standards, design specifications, and practicability; and economy of fabrication, assembly, and installation.
  3. Supports fabrication and installation of test equipment.
  4. Resolves issues related to design, documentation, procurement, fabrication, and installation.
  5. Coordinates designs for Instrumentation Installations.
  6. Monitors installation progress for support of upcoming flights.
  7. Coordinates aircraft configuration with the Ground Station which will require operational testing out of the Greensboro facility as well as off-site testing as required.
  8. Designs structural products and components of products to support Flight Test Instrumentation.
  9. Performs other duties as assigned.


Education, Work Experience, Certification and/or Licensure:
  1. Bachelors’ degree in Aerospace Engineering, Electrical Engineering, Engineering Technology other related field preferred.
  2. 5+ years of directly related experience.

Knowledge, Skills and Abilities:

  1. Proficiency in 3D multiple component designs and 2D fully dimensional and tolerance drawings.  CATIA V5, PLM systems, TeamCenter strongly preferred.
  2. Strong Microsoft Office Suites (Word, Excel, and PowerPoint) strongly preferred.
  3. Strong computer operating systems skills.
  4. Excellent oral and written communication skills.
  5. Excellent interpersonal skills.
  6. Experience with aircraft data acquisition systems.
  7. Experience with FAA regulations.
  8. Excellent analytical skills.

Physical Requirements:

  1. Incumbents may be routinely exposed to equipment operational noise heat-cold-dust, and/or aircraft equipment, parts, or fuel odors.
  2. Incumbents may be required to stand, sit, squat, walk, bend, move, reach, or stretch for prolonged time periods with no restrictions, as required by job duties.
  3. Work in a safe and professional manner while adhering to all regulatory requirements (FAA, OSHA, DOT, EPA, State, and Federal regulations, etc.).
  4. Read, hear, speak, and see with no restrictions, as required by job duties.
  5. Comprehend and adhere to management directions and/or safety instructions with no restrictions.
  6. Effectively communicate in Business English language.
  7. Pull, push, carry, lift, or move items up to 10 lbs. throughout the work shift without assistance, as required by job duties.
  8. Pull, push, carry, lift or move materials/people/items/equipment weighing up to 50lbs or more during the work shift, with the use of Company provided “reach assistance technology” or “movement assist technology” (fork-lifts, pallet jacks, pulleys, dolly’s, robotics reach equipment, people movers etc.), as required by job duties.


PDS Tech, Inc. is an Equal Opportunity Employer and will not discriminate against applicants on the basis of race, color, religion, sexual orientation, gender identity, national origin, veteran status, or disability.
 
Job Number: 1610060142
Job Location: Greensboro, NC
Duration: 12 months
Input Date: 01/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Earl Sawyer
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002Fth3AAC&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Support and Training - Instructor - Tech Spec II

Description:
UNIQUE SKILLS
CATIA v5 experienced with 5000+ hours. All Level 1 tools CATIA v5 (Part Design, Assembly, Drafting). Level 2 tools CATIA v5 Generative Surfacing, Free Style Shaping, Generative Sheetmetal, Generative Stress Analysis. Other tools: CATIA v5 Composites, Electrical EHI, Capitol Harness, Tubing experience a plus. Quantitative experience with Geometric Dimensioning and Tolerances a plus. Experience working within PDM systems such as Enovia, SmarTeam or NX/Teamcenter. Formal Classroom instruction experience required for CATIA and PDM.

EDUCATION AND EXPERIENCE REQUIREMENTS
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 10 yrs. in specific technical discipline or 15 yrs. broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs. for Masters and 4 yrs. for PhD in fields applicable to this job.

POSITION PURPOSE
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of client products and services

PRINCIPAL DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

ADDITIONAL FUNCTIONS
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
2. Performs other duties as assigned

OTHER REQUIREMENTS
1. Advanced degree in engineering, or related curriculum preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 17-758-82041
Job Location: Southeast
Rate: $60.00 to $62.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 01/08/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Support and Training Instructor

Description:
Design Support and Training - Instructor - Tech Spec II
Savannah, GA
Rate:$60-$62

Unique Skills:

CATIA v5 experienced with 5000+ hours. All Level 1 tools CATIA v5 (Part Design, Assembly, Drafting). Level 2 tools CATIA v5 Generative Surfacing, Free Style Shaping, Generative Sheetmetal, Generative Stress Analysis. Other tools: CATIA v5 Composites, Electrical EHI, Capitol Harness, Tubing experience a plus. Quantitative experience with Geometric Dimensioning and Tolerances a plus. Experience working within PDM systems such as Enovia, SmarTeam or NX/Teamcenter. Formal Classroom instruction experience required for CATIA and PDM.


Education and Experience Requirements:

Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:

Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

Principal Duties and Responsibilities:

Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 2. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 6620
Job Location: Savannah, GA
Rate: $60-$62
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 12/26/2017
Firm Name: INCONEN CORPORATION
Attention: Brad
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

EHI Engineers

Description:
Develop electrical wiring interconnect system (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wire harness assemblies, utilizing CATIA V5 Electrical and Sheet Metal Work Benches. Capable of interfacing with wiring diagrams, system, and EMI/EMC requirements. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements.
 
Job Location: Savannah, GA
Input Date: 07/07/2014
Firm Name: INCONEN CORPORATION
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Email: cathy@inconen.com
Website: www.inconen.com

EWIS Expert

Description:
Legacy Engineering, a division of PDS Tech, is seeking candidates for EWIS Expert for the Regional Jet Development Program. 
This position is located in Nagoya, Japan.  

As a global engineering expert in aircraft Electrical Wiring Interconnection Systems, you will coordinate with contracted suppliers, interface with all other aircraft functions and engineering teams to coordinate and obtain the approval of any task assigned contributing to the aircraft System development and Certification;
 
Scope of Work:
         Work as Global engineering expert as part of the EWIS team
         Basic work scope is to participate in the development and finalization of the aircraft T/C design, compliant to all applicable requirements.
         This activity includes:



  • Evaluating the current aircraft design, with respect to compliance to the EWIS related airworthiness regulations of JCAB, FAA and EASA,
  • Coordinate activities related to defining the ESSDs required to generate wiring diagrams
  • Support verification and showing-compliance activities, such as Ground and Flight Tests, Design Reviews, Inspections, Analysis, etc.
  • Coordinating integration of design change activities originated from EWIS requirements when required, run unit base and manage aircraft level changes for EWIS group
  • Responsible for tasks required to perform above activities are considered within work scope; initiating/ reviewing related documents, technical calculation, interface discussions with the team members and all the other stakeholders including systems, structures, manufacturing, customer support, and partners.
  • Coaching and Education of company members about professional knowledge in the EWIS domain.
  • Interface with other suppliers as appropriate.
  • Provide technical expertise and assist in resolving the EWIS issues during any rig testing or flight testing.
     


 



 
Job Number: 1710075244
Job Location: Nagoya,
Duration: 12 months
Input Date: 01/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023L1VAAU&URLSource=cjhunter

Electrical (EWIS) Design Engineer - Catia V5

Description:
Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Company products and services

Essential Functions:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
Catia V5 Required

Unique Skills:
Develop electrical wiring interconnect system (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wire harness assemblies, utilizing CATIA V5 Electrical and Sheet Metal Work Benches. Capable of interfacing with wiring diagrams, systems, and EMI/EMC requirements. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements.
• Aerospace Experience is required
• Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required
• Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative
• Knowledge of Catia V5 Electrical is required

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.
 
Job Number: 372888
Job Location: Savannah, GA
Rate: TBD
Duration: 12 - months
Start Date: ASAP
Input Date: 01/23/2018
Firm Name: CTS INTERNATIONAL
Address: 11100 NE 8TH ST STE 800
City, State: BELLEVUE, WA 98004
Phone: 425/646-2688
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com

Electrical (EWIS) Engineer - Technical Specialist II

Description:
Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Company products and services

Essential Functions:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.

Unique Skills:
Develop electrical wiring interconnect systems (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wiring diagrams, cable/wire harness assemblies, and rack/panel designs from electrical system schematics adhering to EWIS requirements. Select qualified electrical components such as connectors, backshells, and other parts. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements.
• Aerospace Experience is required
• Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required
• Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative
• Knowledge of Mentor Graphics Capital Harness Systems (CHS) is strongly desired

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.
 
Job Number: 372887
Job Location: Savannah, GA
Rate: TBD
Duration: 12 - months
Start Date: ASAP
Input Date: 01/23/2018
Firm Name: CTS INTERNATIONAL
Address: 11100 NE 8TH ST STE 800
City, State: BELLEVUE, WA 98004
Phone: 425/646-2688
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com

Electrical (EWIS) Engineer -TS II

Description:
PDS Tech is seeking a Electrical (EWIS) Engineer -TS II  for an open position in Savannah, GA.

Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of products and services

Principle Duties and Responsibilities:

Essential Functions:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative 

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Education and Experience Requirements: Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job. 

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred. 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.

Unique Skills: Develop electrical wiring interconnect systems (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wiring diagrams, cable/wire harness assemblies, and rack/panel designs from electrical system schematics adhering to EWIS requirements. Select qualified electrical components such as connectors, backshells, and other parts. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements. • Aerospace Experience is required • Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required • Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative • Knowledge of Mentor Graphics Capital Harness Systems (CHS) is strongly desired


 
Job Number: 1710074338
Job Location: Savannah, GA
Duration: 6 months
Input Date: 01/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Jyotsna Sivan
Address: 900 CIRCLE 75 PKWY SE STE 600
City, State: ATLANTA, GA 30339
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023IdZAAU&URLSource=cjhunter

Electrical (EWIS) Engineer W/Catia V5-TS II

Description:
Electrical (EWIS) Engineer w/Catia V5-TS II
Savannah, GA
Rate: $70-$77

Unique Skills:

Develop electrical wiring interconnect system (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wire harness assemblies, utilizing CATIA V5 Electrical and Sheet Metal Work Benches. Capable of interfacing with wiring diagrams, systems, and EMI/EMC requirements. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements. • Aerospace Experience is required • Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required • Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative • Knowledge of Catia V5 Electrical is required


Education and Experience Requirements:

Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.


Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

Principle Duties and Responsibilities:

Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7977
Job Location: Savannah, GA
Rate: $70-$77
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 01/17/2018
Firm Name: INCONEN CORPORATION
Attention: Cathy O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: cathy@inconen.com
Website: www.inconen.com

Electrical (EWIS) Engineer-TS II

Description:
Electrical (EWIS) Engineer-TS II
Savannah, GA
Rate: $70-$77

Unique Skills:

Develop electrical wiring interconnect systems (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wiring diagrams, cable/wire harness assemblies, and rack/panel designs from electrical system schematics adhering to EWIS requirements. Select qualified electrical components such as connectors, backshells, and other parts. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements. • Aerospace Experience is required • Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required • Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative • Knowledge of Mentor Graphics Capital Harness Systems (CHS) is strongly desired


Education and Experience Requirements:

Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.


Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

Principle Duties and Responsibilities:

Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7976
Job Location: Savannah, GA
Rate: $70-$77
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 01/17/2018
Firm Name: INCONEN CORPORATION
Attention: Cathy O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: cathy@inconen.com
Website: www.inconen.com

Electrical Applications Engineer

Description:
Hiring in multiple locations

Email your resume or apply online

Benefits Available
- long term contracts
- top per diem rates
- direct deposit
- referral bonuses
- 401(k) program
 
Input Date: 05/09/2017
Firm Name: NESC STAFFING
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
800 Phone: 800/562-3463
Email: lokeefe@nesc.com
Website: www.nesc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Applications Engineering

Description:
UNIQUE SKILLS
Experience with Autocad required. Aerospace experience required. Experience or knowledge of electrical connectors, backshells, shielding, wiring and electrical connectivity is required. Be Familiar with CFR 14 Part 25 and AS50881. Candidate must be able to create wiring diagrams and schematics to include the selection of qualified electrical components such as connectors, backshells and other electrical parts. Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required. Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project.

JOB DESCRIPTION
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs. in the specific technical discipline or 10 yrs. broad engineering experience in several technical disciplines with Bachelors, or 3 yrs. in the specific technical discipline with Masters, or 1 yr. in the specific technical discipline with PhD. Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

PRINCIPAL DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

ADDITIONAL FUNCTIONS
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

OTHER REQUIREMENTS
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 17-736-93664
Job Location: Southeast
Rate: $58.00 to $63.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 01/08/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

Electrical Applications Engineering Consultant

Description:
PDS Tech is seeking an Electrical Applications Engineer for an open position in Savannah, GA.
In your role, you will:

 

Unique Skills:



  • Experience with Mentor Graphics L-Cable required. Aerospace experience required.
  • Experience or knowledge of electrical connectors, backshells, shielding, wiring and electrical connectivity is required. Be Familiar with CFR 14 Part 25 and AS50881.
  • Candidate must be able to create wiring diagrams and schematics to include the selection of qualified electrical components such as connectors, backshells and other electrical parts.
  • Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required.



Principal Duties and Responsibilities: Essential Functions:

  • Contributes to planning, developing and coordinating of important engineering projects
  • Provides specialized technical assistance to team members
  • Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
  • Determines and develops own approach to solutions within schedule and cost objectives
  • Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
  • Acts as liaison with representatives outside of the assigned group/area


Additional Functions:

  • Actively works to improve daily processes and ensures all work meets customer requirements
  • Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
  • Performs other duties as assigned Other

As our ideal candidate, you will meet the following requirements:
  • Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements. 

Education/Experience:

  • Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
  • 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical

 
Job Number: 1610052916
Job Location: Savannah, GA
Per Diem: No
Duration: 6 months
Input Date: 01/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Clyde Callwood
Address: 3922 COCONUT PALM DR STE 100
City, State: TAMPA, FL 33601
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000001tKymAAE&URLSource=cjhunter

Electrical Applications Engineering Contractor

Description:
PDS Tech is seeking an Electrical Applications Engineer for an open position in Savannah, GA.
In your role, you will:

 

Unique Skills:



Experience with Autocad required.

Aerospace experience required.

Experience or knowledge of electrical connectors, backshells, shielding, wiring and electrical connectivity is required. Be Familiar with CFR 14 Part 25 and AS50881. Candidate must be able to create wiring diagrams and schematics to include the selection of qualified electrical components such as connectors, backshells and other electrical parts. Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required.



Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of products and services

Principal Duties and Responsibilities:

Essential Functions:

1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned


As our ideal candidate, you will meet the following requirements:
  • Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements. 

Education/Experience:

  • Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
  • 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical

POC: Clyde (813) 426-9917 or ccallwood@pdstech.com

PDS Tech, Inc. is an Equal Opportunity Employer and will not discriminate against applicants on the basis of race, color, religion, sexual orientation, gender identity, national origin, veteran status, or disability.
 
Job Number: 1710063879
Job Location: Savannah, GA
Per Diem: No
Duration: 6 months
Input Date: 01/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Clyde Callwood
Address: 3922 COCONUT PALM DR STE 100
City, State: TAMPA, FL 33601
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002GKHeAAO&URLSource=cjhunter

Electrical Applications Engineers

Description:
Develop electrical wiring interconnect systems (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wiring diagrams, cable/wire harness assemblies, and rack/panel designs from electrical system schematics adhering to EWIS requirements. Select qualified electrical components such as connectors, backshells, and other parts. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements. Mentor L-Cable
 
Job Location: Savannah, GA
Input Date: 07/07/2014
Firm Name: INCONEN CORPORATION
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Email: cathy@inconen.com
Website: www.inconen.com

Electrical CAD Designer/Drafter

Description:
Overview:
  • Develop system designs and create construction documents for electrical projects using AutoCAD/AutoCAD Electrical.
  • MicroStation would be a plus
  • Work may include single line diagrams, schematics, interconnect diagrams, panel layouts, bill of materials, conduit and cable tray layouts/schedules/fill calculations, and cable and wire interconnection reports.
  • Create drawings for electrical enclosures, equipment, instruments, and installations details.    
  • Complete electrical drawings package under direction from electrical engineering group.

  • Must have strong knowledge and skill with AutoCAD Electrical software.
  • Minimum 3 years AutoCAD drafting experience.
  • MicroStation would be a plus
  • Clear understanding of electrical engineering terminology, codes, and drafting techniques.
  • Familiar with construction processes.
  • Associates Degree in engineering drafting/design or related field.
  • Ability to analyze problems and develop solutions.
  • Ability to clearly communicate technical/non-technical aspects of engineering and construction projects.

 
Job Number: 1710064163
Job Location: Green Bay, WI
Duration: 6 months
Input Date: 01/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Sue Van Pay
Address: 110 PACKERLAND DR STE A
City, State: GREEN BAY, WI 54303
Phone: 920/499-9943
800 Phone: 800/333-1389
Fax Phone: 920/499-9067
Email: cecjgreenbay@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002GLU5AAO&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Controls Engineer

Description:
Manages low to medium complexity projects around the design and planning of layout for assembly and materials handling. Adaptation of low complexity machine or equipment design to factory and production conditions. Planning of sequence of operations and specification procedures for the fabrication of tools and equipment and other functions that affect product performance.
Manufacturing Controls Engineer Controls Engineer supports the overall manufacturing process through the ownership of PLC-related programming, troubleshooting, and support of PLC ladder logic. Responsible for the implementation of engineering changes and assisting various departments with the implementation of new tools and processes and required training.
- Support the plant in all aspects of the electrical maintenance troubleshooting using PLC and robot programming skills and a thorough understanding of the machines sequence of operations.
- Support the new equipment design reviews when required to review the status of the machine design and provide input in reference to the plant's specifications and good design practice.
- Manage the required electrical spare parts in the tool crib to ensure we can support any potential equipment failures on controls related items.
- Respond to any equipment downtime issues in plant and establish any required outside resources to assist in responding to these issues quickly.
- Train and develop the plant electricians to increase their ability to understand and troubleshoot controls related issues in the plant.
- Interface with the equipment supply base to have key resources at our suppliers to assist in equipment problem solving when required. Know who to call when.
- Manage large and small equipment improvement projects in the plant as a leader.
- Complete the capital equipment list for secondary equipment required for the program detailing the cycle time requirements.
- Write detailed engineering specifications for all the tooling and equipment required to purchase, include all relevant legislative requirements.
- Select the suppliers for capital equipment.
- Manage the capital budget for all the necessary equipment purchases.
- Ensure the completion dates for all equipment are met.
- Develop the preventative maintenance plan for the electrical section of new equipment for the production plant.
- Detail training needs for the plant for new equipment.
- Integrate with the launch teams to transfer the technology required for new programs successfully to the plant.

Education / Certifications - A Bachelor’s Degree in Electrical Engineering (or similar related degree). -

Experience / Qualifications:
- College Level Electrical Controls Technology Program
- Completion of 3 year program
- Minimum of three years as a Controls Engineer in a manufacturing facility
- Strong team work capabilities, operating in a multi-function environment to collectively improve operations and resolve related issues
- Experience in programming and troubleshooting problems with robots
- Experience in programming Allen Bradley, Siemens, and Omoron PLC’s
- Experience with assembly processes - Strong mechanical aptitude - Hands-on approach to engineering
 
Job Number: SC39937
Job Location: Florence, SC
Rate: $40.00
Per Diem: Possible
Overtime: Possible
Duration: 10 months
Input Date: 11/30/2017
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Bill Carriveau
Address: 7310 RITCHIE HWY STE 400
City, State: GLEN BURNIE, MD 21061-3092
800 Phone: 866/277-3343
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design and Cabin Management Eng Contractor TS II

Description:
UNIQUE SKILLS
Experience in engineering design of electrical systems that are part of and support aircraft interiors. This includes entertainment, power, lighting, cabin management and communication systems. Experience in creating wiring diagrams, schematics, wire harness drawings, electrical installation drawings and completing supporting analysis/calculations (e.g. voltage drop) AutoCAD, CATIA V5 and SmarTeam experience preferred Take ownership of deliverables produced & their quality. Coordination with the other Engineering disciplines, client and vendors. Experience with leadership/program management on a design program. Take lead role in the process of preparation of design deliverables to ensure appropriate checking & review of all documents / drawings before release.

EDUCATION AND EXPERIENCE REQUIREMENTS
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs. in specific technical discipline or 15 yrs. broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs. for Masters and 4 yrs. for PhD in fields applicable to this job.


POSITION PURPOSE
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of client products and services

PRINCIPLE DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

ADDITIONAL FUNCTIONS
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

OTHER REQUIREMENTS
1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 17-776-111061
Job Location: Southeast
Rate: $65.00 to $70.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 01/08/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

Electrical Design and Cabin Management Engineer

Description:
Electrical Design and Cabin Management Engineer

Location: Savannah, GA
Pay Rate: $65/hr - $70/hr
Duration: Long Term Contract
Shift: First

Unique Skills:
-Experience in engineering design of electrical systems that are part of and support aircraft interiors.
-This includes entertainment, power, lighting, cabin management and communication systems.
-Experience in creating wiring diagrams, schematics, wire harness drawings, electrical installation drawings and completing supporting analysis/calculations (e.g. voltage drop)
-AutoCAD, CATIA V5 and SmarTeam experience preferred.
-Take ownership of deliverables produced & their quality.
-Coordination with the other Engineering disciplines, client and vendors.
-Experience with leadership/program management on a design program.
-Take lead role in the process of preparation of design deliverables to ensure appropriate checking & review of all documents / drawings before release.

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Company products and services

Principle Duties and Responsibilities/Essential Functions:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.
Other Requirements:
1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 7764
Job Location: Savannah, GA
Rate: 65-70
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 01/17/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: rex@inconen.com
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical EWIS Eng w/Catia V5 - TS II

Description:
UNIQUE SKILLS
Develop electrical wiring interconnect system (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wire harness assemblies, utilizing CATIA V5 Electrical and Sheet Metal Work Benches. Capable of interfacing with wiring diagrams, systems, and EMI/EMC requirements. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements. • Aerospace Experience is required • Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required • Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative • Knowledge of Catia V5 Electrical is required

EDUCATION AND EXPERIENCE REQUIREMENTS
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

POSITION PURPOSE
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of client products and services

PRINCIPLE DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

ADDITIONAL FUNCTIONS
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

OTHER REQUIREMENTS
1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 17-795-116742
Job Location: Southeast
Rate: $58.00 to $63.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 01/08/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

Electrical EWIS Engineer/ Electrical Apps

Description:
Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services

Unique Skills:
• Develop electrical wiring interconnect systems (EWIS), capable of resolving all technical issues relating to EWIS.
• Produce and maintain wiring diagrams, cable/wire harness assemblies, and rack/panel designs from electrical system schematics adhering to EWIS requirements.
• Select qualified electrical components such as connectors, backshells, and other parts.
• Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements
• Aerospace Experience is required
• Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required
• Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative
• Knowledge of Mentor Graphics Capital Harness Systems (CHS) is strongly desired

Education and Experience Requirements:
• Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required.
• 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.



Essential Functions:
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Is consulted extensively by associates and others as a recognized authority within the field
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
• Approach to problem solving balances technical product, cost and schedule
• Works without appreciable direction; work is reviewed from a long-range perspective for desired results
• Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
 
Job Number: 24-204
Job Location: Savannah, GA
Rate: $58 - $63
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 01/23/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Email: matt@precisionpersonnel.com
Website: www.precisionpersonnel.com

Electrical EWIS Engineer/EHI

Description:
Position Purpose:

Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services


Unique Skills:


• Develop electrical wiring interconnect system (EWIS), capable of resolving all technical issues relating to EWIS.
• Produce and maintain wire harness assemblies, utilizing CATIA V5 Electrical and Sheet Metal Work Benches.
• Capable of interfacing with wiring diagrams, systems, and EMI/EMC requirements.
• Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements.
• Aerospace Experience is required
• Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required
• Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative
• Knowledge of Catia V5 Electrical is required

Education and Experience Requirements:

• Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required.
• 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Principle Duties and Responsibilities:

• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Is consulted extensively by associates and others as a recognized authority within the field
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
• Approach to problem solving balances technical product, cost and schedule
• Works without appreciable direction; work is reviewed from a long-range perspective for desired results
• Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
 
Job Number: 24-205
Job Location: Savannah, GA
Rate: $58 - $63
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 01/23/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Email: matt@precisionpersonnel.com
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Alabama, Tucson or Texas locations
FPGA and Digital design experience
Senior Designer or Electrical Engineer with understanding and wide application of technical theories, and concepts in digital design, with general knowledge of other related disciplines. The Senior Designer provides technical solutions to a wide range
of difficult problems. This position will function in a multi-disciplined design team. The person will be the Responsible Engineering Authority (REA) for hardware design, fabrication, assembly, test, and integration of a circuit card. Designs include technology of processors, FPGAs, memory, and industry interfaces, such as PCIe, Ethernet, I2C, UART. Candidates can independently determine and develop approach to solutions to contribute to the completion of specific programs and projects.



Required Skills:

• A minimum of 4 years’ experience in Digital Design

• Proven ability to take a design concept from the block diagram or requirements level and develop a complete hardware design

• Experience with PCB design tasks and proven ability to use tools to design (schematic capture), analyze and simulate designs prior to hardware execution.

• Experience with embedded test techniques, design for test, design margin analysis and circuit design for production

• A strong advocate for process improvement

• A self-motivated and effective communicator

• Experience in managing schedule and resources to meet assigned milestones

• Ability to obtain and retain security clearance

Desired Skills:

• Experience using Mentor Graphics Design Creation tools: DxDesigner, xDX Designer VX, and Constraint Editor System (CES)

• Experience using Mentor Graphics PCB electronic circuit design software: HyperLynx signal integrity, power integrity, and analog simulation, Xpedition Enterprise (xPCB)

• Six Sigma specialist

Required Education (including Major):

Bachelor’s Degree in Electrical Engineering (MS preferred) or similar degree and meets the experience requirements
 
Job Number: 38760
Job Location: Huntsville, Al
Duration: 18 months
Start Date: ASAP
Input Date: 12/06/2017
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Rick Nussbaum
Address: 1700 WELLS RD STE 1
City, State: ORANGE PARK, FL 32073-2373
Phone: 904/562-3215
800 Phone: 866/277-3343
Fax Phone: 904/713-2000
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Principal Engineer (EMI/ EMC Electromagnetic Interference) - Domestic and International Programs
This position is based with the IDS Electrical Design Directorate Seapower and Electronic Systems Department in Marlborough, MA. Our engineers develop state of the art technology in support of multiple programs, international and domestic, deployed throughout the globe.
We are looking for an experienced Engineer in the field of EMI/ EMC electromagnetic interference/ electromagnetic compatibility. The candidate should possess at least 10 years of experience in this field with 10 years of engineering experience and have experience with both military and commercial standards, including but not limited to MIL-STD-461F and above, MIL-STD-464C and above, EN5550X, EN61000-XX and FCC Part 15. A critical skill will be ability to perform analysis with respect to NSTISSAM TEMPEST/2-95 and experience with the Certified TEMPEST Technical Authority (CTTA) and NSA TAG certified TEMPEST Professional Level 1 or 2. Additional areas of expertise will include experience in the design and verification analysis of EMI/EMC, Electrostatic Discharge (ESD), Hazards of Electromagnetic Radiation to Personnel (HERP), and Hazards of Electromagnetic to Ordnance (HERO), Lightning, EMP and High Altitude EMP, Shielding effectiveness and ESD. Also desirable would be familiarity with TEMPEST filter designs and isolation techniques.
Additional skills required include a background in E3/ TEMPEST testing, including test plan development, test execution and report generation.
Required Skills:
•5+ years of experience in field of TEMPEST analysis including NSA TAG certification TEMPEST professional Level 1.
•10+ years of experience in the field of EMI/ EMC including Electrostatic Discharge, Hazards of Electromagnetic Radiation (RADHAZ) , Lightning, EMP and High Altitude EMP analysis and/ or test.
•Familiarity with both Military and commercial standards including but not limited to MIL-STD-461F and above, MIL-STD-464C and above, EN5550X, EN61000-XX and FCC Part 15.
•Familiarity with design simulation tools including AutoCAD, Mathcad, MatLab, FloEMC, XFDTD, EMPro, ANSYS and NEC4.
•Basic project planning and tracking experience
Desired Skills: •NSA TAG certification TEMPEST professional Level 2
•NARTE Engineering Electromagnetic Compatibility/Interference (EMC/EMI) Certification
•10+ years of EMC and design experience
•Background in E3 testing including test plan development, test execution and report generation Required Education (including Major):
•BS in Engineering, Science or Mathematics plus 10 years experience
•MS in Engineering, Science or Mathematics with 5 years experience
•PhD in Engineering, Science or Mathematics with 5 years experience
 
Job Number: 40004
Job Location: Marlborough, MA
Duration: C-P
Start Date: ASAP
Input Date: 12/05/2017
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Rick Nussbaum
Address: 1700 WELLS RD STE 1
City, State: ORANGE PARK, FL 32073-2373
Phone: 904/562-3215
800 Phone: 866/277-3343
Fax Phone: 904/713-2000
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
SUMMARY
Performs a variety of engineering work including design, analysis, substantiation, certification, drawing interpretation and project management as related to transport category aircraft.

ESSENTIAL DUTIES AND RESPONSIBILITIES
Create step by step work instructions for the removal and installation of hardware and components as they relate to aircraft structures, systems, interiors and avionics. Troubleshooting of noted aircraft systems Repair, design and analysis of metal, composite and metal bond structures Knowledge of the Federal Aviation Regulations FARs from Title 14 of the Code of Federal Regulations as they apply to transport category aircraft. Knowledge of cabin specific regulatory requirements, including flammability and crashworthiness as examples Familiarity with the Supplemental Type Certificate STC process Familiarity with the FAA Airworthiness Directive AD process and rules governing disposition Translates guidance and engineering principles and procedures into usable working direction for assigned projects Ability to read and interpret technical drawings, preferably those created by Boeing, Airbus and Douglas. They should also be familiar with the documents needed to routinely maintain commercial aircraft Structural Repair Manual SRM, Aircraft Maintenance Manual AMM, Illustrated Parts Catalog IPC, etc. Ability to analyze Original Equipment Manufacturer OEM source documents Service Bulletins, Service Letters, etc. and make independent decisions based on analysis of available data regarding incorporation on Customers fleet. Ability to quickly learn and adhere to Operators specific processes and procedures. Project Management skills multiple task Gathers, coordinates and applies basic engineering data using established and appropriate or defined engineering principles and procedures Applies area of specialty to design, develop and implement creative and innovative solutions to difficult problems Reviews progress with management and recommends corrective action along with review of alternatives Performs such individual assignments as supervisors and superiors may direct ensures adequate and continuous controls are exercised over all assigned activities affecting quality establishes and maintains effective work relationships within the department, the Corporation and the community and maintains the professional competence, knowledge and skill necessary for the satisfactory performance of all assigned responsibilities Travel as required All other duties as assigned.
 
Job Number: 17-729
Job Location: Midwest
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 01/08/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
• Security Clearance desirable but not required.

• Experience: 8+ years of domain experience
focused on the analysis and troubleshooting aspect and not someone who has only designed.

• Design, development, modification and analysis of various electronic systems.

• Troubleshoot and diagnose malfunctions in new/existing products or systems and makes modifications as needed.

• Compile and evaluate design and test data.

• Analyze, develops and recommends design approaches.

• Must be familiar with VHDL, Verilog, FPGAs, CPLDs, Schematic Capture/Simulation (preferably Mentor tools). 8-10 years Hardware design experience
 
Job Number: 40855
Job Location: OH
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 11/29/2017
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

Electrical Engineer

Description:
The Electrical Engineer will perform electrical engineering activities in accordance with client work instructions and procedures.  This position is to support work ongoing at the client facility.  This position will work in the following capacity:
  • Investigate failures and request for changes from our circuit card supplier
  • Create the needed artifacts to support the electrical engineering documentation and release; artifacts can be used as evidence to substantiate the execution of processes

Basic Qualifications

  • Bachelor Degree in Electrical Engineering, and/or equivalent proven experience
  • Critical Thinker & Able to offer Value Added Solutions
  • 6 years or greater in an engineering role
  • Schematic Capture and P-Spice experience beyond a basic level
  • Familiar with Teamcenter or an equivalent PLM tool

 
Additional Qualifications
  • Experience with  engineering tools such as Subversion, requirements documents, and requirements based electrical design
  • Self-Starter/Independent worker that demonstrates initiative and sound judgment and has the ability to manage and coordinate their work with multiple groups inside and outside the department

Skills:

  • Proficient in communicating in English Language
  • Strong Communication and Interpersonal Skills
  • Strong Analytical and Problem Solving Skills
  • Strong Computer and Web Navigation skills

The position requires the ability to analyze and troubleshoot circuits, read/update schematics, and guide change orders through the necessary processes. A working knowledge of Schematic Capture, P-Spice, and TeamCenter is required
 
Job Number: 1710077877
Job Location: Vergennes, VT
Duration: 12 months
Input Date: 01/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Roger Greco
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023RLAAA2&URLSource=cjhunter

Electrical Engineer

Description:
PDS is seeking a Electrical Engineer TS I  for an open position in Savannah, GA.
In your role, you will:


Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of products and services

Principal Duties and Responsibilities:

Essential Functions:

1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
2. Performs other duties as assigned

Education and Experience Requirements:



Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 10 yrs in the specific technical discipline or 15 yrs broad engineering experience in several technical disciplines with Bachelors, or 8 yrs in the specific technical discipline with Masters, or 6 yrs in the specific technical discipline with PhD. 

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline

Unique Skills: Candidate shall have experience in one or more of the following: Electronic hardware design, Data acquisition system design, Industrial process measurement

POC: Clyde (813) 426-9917 or ccallwood@pdstech.com 
 
Job Number: 1710071488
Job Location: Savannah, GA
Duration: 6 months
Input Date: 01/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Clyde Callwood
Address: 3922 COCONUT PALM DR STE 100
City, State: TAMPA, FL 33601
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i5000000238B7AAI&URLSource=cjhunter

Electrical Engineer

Description:
Many more engineering, IT, and manufacturing openings throughout the U.S. Check our website www.chiptonross.com for a complete list of current openings

Benefits:
Holiday Pay, Weekly Pay, Vacation Pay, Referral Bonus, Group Health Insurance, Delta Dental, 401(k), Direct Deposit
 
Job Number: 164437
Job Location: New Jersey
Input Date: 07/31/2017
Firm Name: CHIPTON ROSS
Attention: Brenda Ordaz
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
800 Phone: 800/927-9318
Email: bordaz@chiptonross.com
Website: www.chiptonross.com

Electrical Engineer

Description:

PDS Tech, Inc. is seeking an Electrical Engineer for a position located in Kansas City, MO. 
Must hold an active clearance (preferably a DOE Q, or could be a DOD TS).

The Client's organization has several open opportunities for Electrical Engineers.  We are seeking engineers who are interested in supporting one or more of the following areas:  electrical and/or electronic components and major assemblies; discrete and custom devices; complex cables; RF/radar/antenna devices and components; test equipment hardware and/or software; test & controls; purchased and COTS products; control account management.

  • Performs project planning and manages project resources, including multiple individuals and disciplines, to achieve quality, delivery, and cost objectives.
  • Conducts research and development experiments to resolve complex engineering and quality problems involving highly technical, scientific methods.
  • Writes technical reports on results and conclusions drawn from experiments conducted and incorporates findings in formal specifications.
  • Translates design agency concepts into production items by coordinating the activities of engineering, quality, manufacturing, and related organizations.
  • Estimates set-up times, flow times, costs of production and acceptance equipment, and compiles cost estimates and delivery quotations, monitors performance, and prepares reports, statistics, and recommendations for management review.
  • Contributes to business growth through the pursuit of new technology; participates in establishing operating procedures on new products and components.
  • Defines and recommends new designs, design changes, and alternate designs of instruments, and test equipment, and orders tooling, gaging, and equipment necessary to assure product quality.
  • Plans and performs engineering testing and development programs and uses advanced statistical and scientific methods to address and resolve critical engineering and production problems to assure product manufacturability.
  • Originates, refines, and releases complex manufacturing or inspection work directions.
  • Determines acceptability of processes and materials in conjunction with customers, design agency, quality, and other affected organizations.
  • Interacts with customers, design agency and/or supplier counterparts to resolve moderate to complex design, development, production and acceptance issues.
  • Based on research, applies, develops and recommends innovative methodologies and technologies which are equal to the industry's state of the art to resolve processing and design problems.
  • Provides technical consultation to management and others, and leads technical project teams. 
  • Responsible for work that may involve longer range and/or complex business objectives in field of expertise.
  • Evaluates and implements innovations and technological advances that improve quality, reduce flowtime, improve productivity, and enhance operational surety.
  • Performs highly complex calibration and measurement services, recommends changes in calibration procedures to improve services, and solves special measurement problems.
  • May perform other duties as required.
  • Conducts activities in a safe and healthy manner and works in accordance with established HS&E requirements to ensure the protection of employees, the public, and the environment.  Takes actions necessary to "stop" work when an unsafe condition or action is identified.  Every employee has the right and responsibility to stop work when unsafe conditions or actions are identified.

Basic Qualifications: 
  • US citizenship in order to obtain and maintain US Dept of Energy "Q" level security clearance.
  • Bachelor of Science degree in Electrical Engineering from an ABET accredited program or an equivalent ABET accredited engineering degree.
  • Minimum two (2) years directly applied engineering experience.


Additional Qualifications: 

  • Five (5) or more years directly applied engineering experience in a technology and/or manufacturing environment preferred.
  • Advanced degree in an engineering, physics or business discipline is advantageous.
  • Six Sigma certification (black belt; green belt) preferred.
  • Experience/history reflective of executing continuous improvement toward products and/or processes.
  • Technical project management experience.
  • Experience/familiarity with enterprise resource planning and/or earned value management systems.
  • Experience presenting technical material to varied levels of audiences.
  • Willingness to travel up to 25% of time.

 
Job Number: 1710068676
Job Location: KS City, MO
Duration: 6 months
Input Date: 01/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Tanya James
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002Jr0WAAS&URLSource=cjhunter

Electrical Engineer

Description:
Hiring in multiple locations

Email your resume or apply online

Benefits Available
- long term contracts
- top per diem rates
- direct deposit
- referral bonuses
- 401(k) program
 
Input Date: 05/09/2017
Firm Name: NESC STAFFING
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
800 Phone: 800/562-3463
Email: lokeefe@nesc.com
Website: www.nesc.com

Electrical Engineer

Description:
Electrical Engineer

Location: Savannah, GA
Pay Rate: $58/hr - $63/hr
Duration: Long Term Contract
Shift: First

Unique Skills:
-This position will review designs for Electrical Systems aspects.
-Activities include interacting and coordinating with DERs/ARs during a certification project, coordinating, tracking and completing certification tasks, writing certification plans, test plans, test reports and preparing related paperwork and forms.
-The ideal candidate will have:
-At least one (1) year experience with certification activities associated with STC projects
-Experience with aircraft interior outfitting preferred.
-Current Electrical Systems DER/AR designation preferred
-EWIS experience desirable

Education and Experience Requirements:
-Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

-Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area.

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7129
Job Location: Savannah, GA
Rate: 58.00-63.00
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 01/17/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: rex@inconen.com
Website: www.inconen.com

Electrical Engineer - ASICs / FPGAs

Description:
PDS Tech, Inc. is seeking Senior level Electrical or Computer Engineers for our Client, a premier supplier of avionics, electronics, and communications systems.
 
You will be involved in the testbench design, implementation, and verification of a wide variety of high-performance digital ASICs and FPGAs applied to signal processing, image processing, and information assurance applications.
 
 In this role you will:
  • Provide verification environment architecture and design using SystemVerilog with OVM/UVM
  • Create written test cases, code coverage tracking, and functional coverage tracking
  • Provide testbench development for the verification of RTL blocks using VHDL or SystemVerilog
  • Recommend new tools and practices for continuous improvement in the group's ASIC / FPGA verification flow

  • Experience with testbench development for the verification of RTL blocks using VHDL and/or SystemVerilog
  • Familiarity with best practice chip-level verification techniques and languages (e.g. constrained random, functional coverage, SystemVerilog)
  • Familiarity with revision control concepts and tools (e.g. Clearcase, Subversion)
  • Ability to work with minimal supervision, as a part of a team of engineers with a variety of skills and backgrounds, matrixed into projects with aggressive schedules and frequent milestones
  • Strong oral and written communication skills and the ability to document and present one's work and status
  • Ability to obtain a Security Clearance. US Citizenship is required.
  • Bachelor's Degree in either Electrical Engineering or Computer Engineering field

 
Desired skills:

  • ASIC / FPGA lab validation with advanced lab equipment
  • Design for Test (DFT) and manufacturability issues
  • Experience with Unix, scripting, C/C++, Python, and/or Perl
  • Digital circuit architecture, design, resource tradeoffs, timing analysis and timing closure
  • Proficiency using ASIC and/or FPGA simulation and synthesis tools (e.g. Questasim, Synplify, FPGA-specific tools)

 
Job Number: 1610053774
Job Location: Cedar Rapids, IA
Per Diem: No
Duration: 12 months
Input Date: 01/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Jason Andrzejewski
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002CB3OAAW&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Electromagnetic Effects (Active Secret Clearance REQUIRED)

Description:
Location: Chandler AZ
Clearance: Yes, Active Secret
Job Type: W2 - Contract
Duration: 1 Year, could be extended
Schedule: 9/80

Description:
• Work with a team of engineers to develop electromagnetic models to capture electromagnetic environment effects (E3) including the prediction of pin level transients.
• Work within a cross functional team to leverage inputs from CAD, subsystems and systems engineering to develop a baseline electromagnetic model and increment as the system design evolves to capture E3 effects.
• Updates to the model may include general design changes or the evaluation of potential mitigation approaches.
• Responsible for model validation through the selection of hardware sets which may be components, subsystems or a combination of them.
• Includes the development of test plans for the evaluation of those hardware sets with demonstration of model validation though appropriate comparisons between the model and measurements.
• Travel of up to 25% of the time may be required. 

Must haves:
• Experience with electromagnetic environment effects (E3). On the resume that may show up as intra-system electromagnetic compatibility (EMC), Subsystem and equipment electromagnetic interference (EMI), Lightning,…
• Aerospace experience (rocket (launch) or satellite systems)
• Active Secret Clearance (or cleared within the past year)

Nice to haves:
• Electromagnetic environments effects (E3) modeling experience
• Rocket (launch) system design experience

Top three skills:
• Electromagnetic environments effects (E3)
• Active Secret Clearance (or cleared within the past year)
• Aerospace system design or integration and test experience
 
Job Number: O7802712
Job Location: Chandler, AZ
Rate: Open
Per Diem: Split
Overtime: Some
Duration: 12 Months
Start Date: ASAP
Input Date: 11/29/2017
Firm Name: NESC STAFFING
Attention: Brad McInnis
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
Phone: 603/431-9740
800 Phone: 800/562-3463
Fax Phone: 800/637-2562
Website: www.nesc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Launch Vehicles (Active Secret Clearance REQUIRED)

Description:
Job Title: Electrical Engineer - Launch Vehicles
Location: Chandler AZ
Clearance: YES
Job Type: Contract
Duration: 1 Year, could be extended and/or go direct with the client
Schedule: 9/80

Description:
• Work with a team of engineers to support the Design, Integration and Testing of launch vehicles for the GMD program.
• Support may include designing electrical cable assemblies, processing engineering design changes, performing tests on launch vehicles, processing test data and troubleshooting test anomalies.
• Also responsible for implementing internal and customer requirements on electrical systems.
• Support factory and launch site integration, test and launch activities. Other duties as required.

Qualifications:
• Requires a security clearance and travel of up to 15% of the time are also required.
• BSEE from an accredited university is required.
• Preferred 2 to 5 years of electrical engineering experience, with 1 year minimum requirement.
 
Job Number: O7528577
Job Location: Chandler, AZ
Rate: Open
Per Diem: Split
Overtime: Some
Duration: 12 months
Start Date: ASAP
Input Date: 11/29/2017
Firm Name: NESC STAFFING
Attention: Brad McInnis
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
Phone: 603/431-9740
800 Phone: 800/562-3463
Fax Phone: 800/637-2562
Website: www.nesc.com

Electrical Engineer - Level 2

Description:
Electrical Engineer - Level 2 (Integrated Circuit Layout Engineer)

Location: Santa Barbara, CA
Pay Rate: DOE ($50/hr - $70/hr)
Duration: 1 year W2 contract
Shift: First, 4x10, no OT
**MUST be a U.S. CITIZEN**
**MUST be ELIGIBLE to obtain a SECRET CLEARANCE**

Description
INTEGRATED CIRCUIT LAYOUT ENGINEER - Performs transistor level silicon layout of CMOS integrated circuits for read-out integrated circuit infrared applications.

Skill/Experience/Education (Mandatory):
-Performs transistor level silicon layout of CMOS integrated circuits for read-out integrated circuit infrared applications.
-IC Layout Engineering: CMOS VLSI transistor level layout (4-5 years' required)
-BS degree or higher.
-Must be U.S. Citizen.
 
Job Number: 7887
Job Location: Santa Barbara, CA
Rate: 50-70
Per Diem: Split Possible
Overtime: No
Duration: 1 year
Start Date: ASAP
Input Date: 01/17/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: rex@inconen.com
Website: www.inconen.com

Electrical Engineer - Level 3

Description:
Electrical Engineer - Level 3 (ACTIVE DoD SECRET REQUIRED)

Location: Lexington, KY
Pay Rate: DOE ($35/hr - $45/hr)
Duration: 9 month W2 contract
Shift: First, 5/40, no OT
**MUST be a U.S. CITIZEN**
**MUST have an ACTIVE DoD SECRET CLEARANCE**

Description
As an Electrical Engineer, you will work as part of an engineering team. The team is focused primarily on modifying existing hardware and integrating components into various platforms based on customer specifications.
Your job will be to develop component and system designs based on customer requirements and interface control documents or other similar information. Your designs will comply with applicable military specifications, SAE, ANSI, ASME, and other related design and drafting standards.
Upon design completion, you will be expected to support the fabrication, installation, and integration of your design by providing support to the manufacturing and installation workforce as required.
Experience with aircraft wiring and electrical systems
Ability to create and review various electrical drawing types (wire diagram, termination, cable harness, routing)
Experience with AutoCAD or similar 2D drafting tool Demonstrated previous success working in a team based environment to meet objectives
Strong communication skills, both oral and written Familiarity with SAE AS50881 design guidelines
Understanding of ANSI/ASME Y14.100 or related design and drafting standards
Familiarity with C-130 or other fixed wing aircraft Experience with an engineering change process and/or configuration control process

Skill/Experience/Education (Mandatory):
ACTIVE DoD SECRET CLEARANCE
AutoCAD – (4+ years required)
MS Office Suite – (4+ years required)

Desired:
CATIA V5
TeamCenter Engineering
JobScope/ IT Reports
 
Job Number: 8325
Job Location: Lexington, KY
Rate: 35.00-45.00
Per Diem: Split Possible
Overtime: No
Duration: 9 mos
Start Date: ASAP
Input Date: 01/17/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: rex@inconen.com
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Level 3

Description:
Electrical Engineer - Level 3

Duration: 1 year contract
Pay Rate: DOE ($50/hr - $55/hr)
Location: Grand Prairie, TX
Shift: First, 9/80
*The engineer must have an active SECRET security clearance and it is preferred that the employee's investigation is in scope (investigation performed within the past 5 years)*

Job Description:
-Analog engineer is required to design a power voltage card to convert voltages between mature subsystems.
-The power voltage card will need to fit within an existing space.
-This effort will require part selection, design review, and design release.
-The engineer must have an active SECRET security clearance and it is preferred that the employee's investigation is in scope (investigation performed within the past 5 years).
-The engineer must be proficient in Cadence; have good communication skills.

Mandatory Skills:
-Must have an active SECRET security clearance and it is preferred that the employee's investigation is in scope (investigation performed within the past 5 years).
-Bachelors degree in Electrical Engineering with five or more years of experience.
-Must be willing to accept a wide variety of work assignments supporting the total end-to-end process of capturing, designing, developing, testing, manufacturing, and life-cycle support of electronic systems.
-Must possess strong general electrical engineering knowledge and be familiar with circuit design and components to include electronics testing and troubleshooting.
-Experience in electronic system and subsystem design and test, systems analysis, software-driven operations and test schemes.
-Strong electronic systems integration tasking, estimating, testing and excellent trouble shooting skills.
-Proficiency with electronic analyzers and other trouble shooting tools is required.
-Ability to develop system and subsystem performance requirements.
-Ability to use test equipment to support acceptance testing, manufacturing production and in-process testing, data processing and analysis.

REQUIRED Skill Matrix:
-Power regulation circuit design experience. Schematic entry. PSPICE analysis. Derating analysis. etc. : (9-10 years)
 
Job Number: 7065
Job Location: Grand Prairie, TX
Rate: 50.00-55.00
Per Diem: Possible
Overtime: Yes
Duration: 1 year
Start Date: ASAP
Input Date: 12/26/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Electrical Engineer - Product/Process

Description:
PDS Tech, Inc. is seeking a Product/Process Electrical  Engineer for a position located in Kansas City, MO. 
Must hold an active clearance (preferably a DOE Q, or could be a DOD TS).

This Electrical Engineer position will fulfill a technical role in the Secure Electronics organization. Engineers in this organization provide engineering support of highly technical and advanced manufacturing processes typically requiring specialized qualifications, knowledge, and/or skill. This engineer will perform project management, as well as, design, development, evaluation, and quality control functions on complex engineering projects and electrical assembly devices. While in the position, increasing roles of project leadership are expected. This position will exercise considerable latitude in determining technical objectives of assignments.

Summary of Duties:   
 Performs project planning and manages project resources, including multiple individuals and disciplines, to achieve quality, delivery, and cost objectives.
  • Conducts research and development experiments to resolve complex engineering and quality problems involving technical, scientific methods.
  • Writes technical reports on results and conclusions drawn from experiments conducted and incorporates findings in formal specifications.
  • Translates design agency concepts into production items by coordinating the activities of engineering, quality, manufacturing, and related organizations.
  • Estimates set-up times, flow times, costs of production and acceptance equipment, and compiles cost estimates and delivery quotations, monitors performance, and prepares reports, statistics, and recommendations for management review.
  • Participates in establishing operating procedures on new products and components.
  • Defines and recommends new designs, design changes, and alternate designs of instruments, and test equipment, and orders tooling, gaging, and equipment necessary to assure product quality.
  • Plans and performs engineering testing and development programs and uses advanced statistical and scientific methods to address and resolve critical engineering and production problems to assure product manufacturability.
  • Originates, refines, and releases complex manufacturing or inspection work directions.
  • Determines acceptability of processes and materials in conjunction with customers, design agency, quality, and other affected organizations.
  • Based on research, applies, develops and recommends innovative methodologies and technologies which are equal to the industry's state of the art to resolve processing and design problems.
  • Provides technical consultation to management and others, and leads technical project teams.
  • Responsible for work that may involve longer range and/or complex business objectives in field of expertise.
  • Evaluates and implements innovations and technological advances that improve quality, reduce flowtime, improve productivity, and enhance operational surety.
  • Performs highly complex calibration and measurement services, recommends changes in calibration procedures to improve services, and solves special measurement problems.
  • May perform other duties as required.
  • Conducts activities in a safe and healthy manner and works in accordance with established HS&E requirements to ensure the protection of employees, the public, and the environment. Takes actions necessary to "stop" work when an unsafe condition or action is identified. Every employee has the right and responsibility to stop work when unsafe conditions or actions are identified.

Basic Qualifications: 
  • US citizenship in order to obtain and maintain US Dept of Energy "Q" level security clearance.
  • Bachelor of Science degree in Electrical Engineering from an accredited Engineering program.
  • Two (2) or more years of relevant experience in engineering of products or processes or comparable related technical area. 

Additional Qualifications:  
 
  • Existing DOE Q clearance.
  • MS in Electrical Engineering from ABET accredited institution.
  • Five (5) or more years of relevant, progressive experience preferred in engineering of products or processes or comparable technical area.
  • Demonstrated experience in project leadership.
  • Broad knowledge of manufacturing or quality processes and techniques.
  • Ability to apply advanced design, development, evaluation, and quality control techniques to highly complex.
  • Electrical Engineering concepts and projects.
  • Ability to work without supervision, with latitude for independent action and decision making.
  • Ability to provide technical guidance, project management, consultative services, and innovative solutions.
  • RF engineering experience.
  • Strong communication skills, both written and verbal.
  • Demonstrated technical innovation and problem solving.
  • Significant experience in a manufacturing or design environment.

 
Job Number: 1710068677
Job Location: KS City, MO
Duration: 6 months
Input Date: 01/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Tanya James
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002Jr0bAAC&URLSource=cjhunter

Electrical Engineer - TX - C

Description:
Chipton Ross is seeking an Electrical Engineer in GRAND PRAIRIE, TX

Start Date: ASAP

Job Description:
Electrical design support will be required to support missile electrical architecture trade studies and concept design. Overall missile electrical design and particular focus for the control actuation system design is required. Candidate may need to work with component suppliers.

The engineer must have an active SECRET security clearance and it is preferred that the employee's investigation is in scope (investigation performed within the past 5 years). The engineer must be proficient in EE toolsets; have good communication skills, and be able to work with internal and external customers.

Mandatory Skills:
Researches, develops, designs, and tests electrical components, equipment, systems, and networks. Designs electrical equipment, facilities, components, products, and systems for commercial, industrial, and domestic purposes. Bachelors degree from an accredited college in a related discipline, or equivalent experience/combined education, with 2 years of professional experience; or no experience required with a related Masters degree. Considered experienced, but still a learner.

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

 
Job Number: 161283
Job Location: Grand Prairie, TX
Rate: Up to $45.00 DOE
Duration: 1 Year
Input Date: 01/23/2018
Firm Name: CHIPTON ROSS
Attention: Robert Davis
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: rdavis@chiptonross.com
Website: www.chiptonross.com

Electrical Engineer 2 - O/M - LA

Description:
Chipton-Ross is seeking a Electrical Engineer 2 for an opening in Avondale, LA.

RESPONSIBILITIES:
Candidate will be responsible for establishing, overseeing, and managing all activities related to assigned shipboard systems. Candidate will perform the following: Research, development, and design of electrical components, equipment, systems, and networks in accordance with all contractual requirements, military and commercial specifications; initiate procurement specifications; review and approve vendor proposals; review, comment on, adjudicate and approve vendor furnished information for translation into construction products; interface with vendors and Navy technical representatives; support vendor design reviews and testing; develop drawings and other documents IAW Mil-Specs and contract drawings; interface with other disciplines and departments to ensure a seamless integration of assigned systems into the shipboard environment; address and resolve technical issues, and make decisions on problems in his/her area of responsibility; support shipbuilding production department as required.

REQUIRED EXPERIENCE:
Bachelor's of Electrical Engineering with two years of engineering experience or Master's of Electrical Engineering with no prior experience, or similar degree background. . Previous shipbuilding experience is highly desired. A qualified candidate should be proficient in Microsoft Office applications and AutoCAD 2014.

ADDITIONAL EXPERIENCE:
It is preferred that the candidate be familiar with shipboard Interior Communications systems such as Switchboards, Telephone systems, Announcing, TV and Audio, Alarms, Indicating, etc. and have an understanding of the typical shipboard interfaces, interconnections, and integration requirements. Familiarity with electrical power distribution systems, control systems, and C4ISR systems is a plus. Current clearance is also a plus.

EDUCATION:
Bachelor's of Electrical Engineering

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 155942
Job Location: Avondale, LA
Rate: $42 to $46.00 DOE
Duration: 1 year
Input Date: 01/23/2018
Firm Name: CHIPTON ROSS
Attention: Andrew Craft
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: acraft@chiptonross.com
Website: www.chiptonross.com

Electrical Engineer 2 - WA

Description:
Chipton-Ross is seeking an Electrical Engineer 2 located in Bingen, WA

RESPONSIBILITIES:
Analyzes and interprets electrical system/subsystem requirements and specifications. Develops requirements and specifications for printed circuit board assemblies. Performs risk assessments and makes mitigation recommendations. Decomposes system requirements. Creates electronic hardware module-level architectures. Develops detailed electrical hardware and firmware designs. Identifies electronic hardware interface controls conflicts and makes recommendations. Creates electronic hardware documentation release packages. Develops and performs verification and validation procedures for electronic hardware components. Conducts testing/ analysis of avionics/electrical components, equipment, and systems. Documents technical performance metrics. Diagnoses malfunctions in existing products and makes design improvements and/or modifications.

REQUIRED EXPERIENCE:
"Ability to analyze problems (troubleshooting, fault isolation, repair, modification, or redesign) of assigned end items to support the design, development and modification of company products using knowledge of engineering disciplines (ME, EE, etc.).
"Knowledge of digital circuit design parameters (e.g., throughput, rise time, clock frequencies, propagation delay) and hardware description languages (e.g., Hardware Description Language [HDL], Verilog). Knowledge of computer hardware and software components (e.g., processors, memory, interfaces, high order languages), and characteristics (e.g., throughput, processing architecture, timing, capacity).
"Knowledge of electrical engineering theories (e.g., Kirchhoff's Law, Ohm's Law, lighting, power factor, control theory), formula selection (e.g., room cavity ratios, short-circuit, voltage drop, motor counts, capacitor, harmonic correction, load calculations), and methods (e.g., relay coordination, root cause analysis).
"Knowledge of Electromagnetic Interference (EMI) and Electromagnetic Compatibility (EMC) considerations with respect to electrical/electronic design (e.g., wire harness design, grounding and shielding design techniques, lightning protection).
"Exercises engineering judgment in developing appropriate decisions considering decision criteria, implications, and possible consequences, to ensure product design integrity. Demonstrates understanding of the applicable scientific and engineering knowledge and involves others in obtaining information for the engineering decision-making process.
"Knowledge of various engineering disciplines such as electrical, mechanical, and systems. The ability to communicate with technical personnel from multiple skill areas and functions to evaluate technical information and issues impacting design, production, and support of products, services, or other deliverables.

EDUCATION:
This job is limited to employees who, in the performance of their assigned work, regularly apply engineering disciplines to the research, design, development, test, and evaluation of company products, facilities, or manufacturing process and have a minimum of a Bachelor's degree of Science from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. Typical experience: 2-4 years in an engineering classification with a Bachelor's degree or 0-2 year's experience in an engineering classification with a Master's degree.

WORK HOURS:
Full-Time

 
Job Number: 165599
Job Location: Bingen, WA
Rate: $DOE
Duration: 6 Months
Input Date: 01/23/2018
Firm Name: CHIPTON ROSS
Attention: Brenda Ordaz
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: bordaz@chiptonross.com
Website: www.chiptonross.com

Electrical Engineer II ( Chandler, AZ ) 7802712

Description:
Electrical Engineer II ( Chandler, AZ ) 7802712
11 month Contract

Pay Rate: $50/hr w2

Work with a team of engineers to develop electromagnetic models to capture electromagnetic environment effects (E3)including the prediction of pin level transients. Work within a cross functional team to leverage inputs from CAD, subsystems and systems engineering to develop a baseline electromagnetic model and increment as the system design evolves to capture E3 effects. Updates to the model may include general design changes or the evaluation of potential mitigation approaches. Responsible for model validation through the selection of hardware sets which may be components, subsystems or a combination of them. Includes the development of test plans for the evaluation of those hardware sets with demonstration of model validation though appropriate comparisons between the model and measurements. Travel of up to 25% of the time may be required.

Job Snapshot: Must haves:
Experience with electromagnetic environment effects (E3). On the resume that may show up as intra-system electromagnetic compatibility (EMC), Subsystem and equipment electromagnetic interference (EMI), Lightning,…
Aerospace experience (rocket (launch) or satellite systems)
Active Secret Clearance (or cleared within the past year)
 
Job Number: 7802712
Job Location: Chandler, AZ
Rate: 50
Per Diem: Yes
Overtime: yes
Duration: 11 month
Start Date: ASAP
Input Date: 01/19/2018
Firm Name: TALENTPRO CONSULTING
Attention: tim
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X101
Fax Phone: 641/209-3001
Email: timmahaney@talentproconsulting.com
Website: www.talentproconsulting.com

Electrical Engineer III ( New Church , VA ) 7043984, Antares Spacelift

Description:
Electrical Engineer III ( New Church , VA ) 7043984
12 Month Contract

Pay rate: $50 - 55/hr w2

Integration & Test Electrical Engineer will support the Antares Spacelift Program. The Antares Program launches spacelift vehicles out of Wallops, VA, to delivery supplies and scientific equipment to the Space Station.

The Integration & Test Engineer will manage assembly, integration, and test of space launch vehicle flight hardware at the Wallops launch site. Specific duties include hands-on electrical integration of flight hardware, developing/maintaining processes and procedures for vehicle assembly and vehicle testing, hands-on electrical testing of flight hardware, and documenting and pursuing root cause of discrepancies found with hardware.

• Bachelors Degree (BS) in Electrical Engineering • 10 years of electrical hands-on integration & test or related experience is required
• Experience with rocket systems is required
• Experience managing/mentoring less experienced electrical engineers
• Ability to work in a fast pace team environment and multi-task
• Strong written and verbal communication skills • Ability to solve problems • Travel availability 5%
 
Job Number: 7043984
Job Location: New Church, VA
Rate: Open
Per Diem: Split
Overtime: Yes
Duration: 12 Month
Start Date: ASAP
Input Date: 01/19/2018
Firm Name: TALENTPRO CONSULTING
Attention: Tim
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X101
Fax Phone: 641/209-3001
Email: timmahaney@talentproconsulting.com
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer-Tucson, AZ - McKinney, TX - Huntsville, AL

Description:
Job Description:
Senior Designer or Electrical Engineer with understanding and wide application of technical theories, and concepts in digital design, with general knowledge of other related disciplines. The Senior Designer provides technical solutions to a wide range
of difficult problems. This position will function in a multi-disciplined design team. The person will be the Responsible Engineering Authority (REA) for hardware design, fabrication, assembly, test, and integration of a circuit card. Designs include technology of processors, FPGAs, memory, and industry interfaces, such as PCIe, Ethernet, I2C, UART. Candidates can independently determine and develop approach to solutions to contribute to the completion of specific programs and projects.

Required Skills:
• A minimum of 4 years’ experience in Digital Design
• Proven ability to take a design concept from the block diagram or requirements level and develop a complete hardware design
• Experience with PCB design tasks and proven ability to use tools to design (schematic capture), analyze and simulate designs prior to hardware execution.
• Experience with embedded test techniques, design for test, design margin analysis and circuit design for production
• A strong advocate for process improvement
• A self-motivated and effective communicator
• Experience in managing schedule and resources to meet assigned milestones
• Ability to obtain and retain security clearance

Desired Skills:
• Experience using Mentor Graphics Design Creation tools: DxDesigner, xDX Designer VX, and Constraint Editor System (CES)
• Experience using Mentor Graphics PCB electronic circuit design software: HyperLynx signal integrity, power integrity, and analog simulation, Xpedition Enterprise (xPCB)
• Six Sigma specialist
Required Education (including Major):
Bachelor’s Degree in Electrical Engineering (MS preferred) or similar degree and meets the experience requirements

**Must be able to obtain/maintain a Secret clearance - Can start without

Multiple locations-
Tucson, AZ - McKinney, TX - Huntsville, AL
 
Job Number: NH
Job Location: Hunstville, AL
Input Date: 12/07/2017
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Gina Smith
Address: 7310 RITCHIE HWY STE 400
City, State: GLEN BURNIE, MD 21061-3092
800 Phone: 866/277-3343
Website: www.apollopros.com

Electrical Engineers

Description:
Vehicle systems integration
 
Job Location: OH/MI/IN
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: jmac@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineers - Santa Barbara, CA

Description:
STS AeroStaff Services now offers Electrical Engineer jobs in Santa Barbara, California.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Duties:

• Designs, develops, and tests CMOS integrated circuits for read-out integrated circuit infrared applications

Qualifications:

• MUST have integrated circuit design engineering experience
• Must be a U.S. Citizen

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 40743
Job Location: Santa Barbara, CA
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 11/29/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Harness Installation Engineer-Special Missions

Description:
UNIQUE SKILLS
Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project. Aerospace experience is required. Knowledge of Catia V5 is required. Candidate must be able to design wire harness assemblies and installations utilizing the Catia V5 Electrical and Sheet Metal Work Benches. Must have intimate knowledge of an ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements, while meeting all installation and maintainability requirements. Candidate must possess knowledge of regulatory guidance material relative to aircraft harness design. Excellent verbal and written communication skills, and computer skills (Catia V5, Catia V4, PC/MS Office) are required.

JOB DESCRIPTION
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs. in the specific technical discipline or 10 yrs. broad engineering experience in several technical disciplines with Bachelors, or 3 yrs. in the specific technical discipline with Masters, or 1 yr. in the specific technical discipline with PhD. Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Client products and services

PRINCIPAL DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

ADDITIONAL FUNCTIONS
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned
 
Job Number: 17-783-115282
Job Location: Southeast
Rate: $58.00 to $63.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 01/08/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

Electrical Harness Installation Engineer-Special Missions

Description:
Electrical Harness Installation Engineer-Special Missions
Savannah, GA
Rate: $58-$63

Unique Skills:

Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project. Aerospace experience is required. Knowledge of Catia V5 is required. Candidate must be able to design wire harness assemblies and installations utilizing the Catia V5 Electrical and Sheet Metal Work Benches. Must have intimate knowledge of an ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements, while meeting all installation and maintainability requirements. Candidate must possess knowledge of regulatory guidance material relative to aircraft harness design. Excellent verbal and written communication skills, and computer skills (Catia V5, Catia V4, PC/MS Office) are required.

Job description:

Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Position Purpose:

Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

Principal Duties and Responsibilities:
Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned
 
Job Number: 7876
Job Location: Savannah, GA
Rate: $58-$63
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 01/17/2018
Firm Name: INCONEN CORPORATION
Attention: Cathy O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: cathy@inconen.com
Website: www.inconen.com

Electrical Harness Installation Engineering Contractor

Description:
PDS Tech is seeking an Electrical Harness Installation Engineering Contractor  for an open position in Savannah, GA.
In your role, you will:

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of products and services

Principal Duties and Responsibilities: Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned



Education/Experience:
  • Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

 

Other Requirements:

1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 



Unique Skills:



Must have In depth knowledge of electrical harness installation and design guidance documentation (AC 43.13B, SAE AS50881, AC1701-1)
In-depth knowledge of FAR 25 sub part H (EWIS) design requirements
Knowledge of EWIS component qualification requirements and documentation (EIA 364, MIL-DTL-38999, MIL-DTL-50151)
Extensive knowledge of EWIS component selection criteria; experience with Mentor Graphics Capital Harness System (CHS) 


POC: Clyde (813) 426-9917 or ccallwood@pdstech.com

 
 
Job Number: 1710069290
Job Location: Savannah, GA
Per Diem: No
Duration: 6 months
Input Date: 01/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Clyde Callwood
Address: 3922 COCONUT PALM DR STE 100
City, State: TAMPA, FL 33601
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002K38fAAC&URLSource=cjhunter

Electrical Harness installation Engineer

Description:
PDS is seeking an Equipment and Furnishings Engineer for an open position in Savannah, GA.


Unique Skills:



 Aerospace experience is required. Knowledge of Catia V5 is required. Candidate must be able to design wire harness assemblies and installations utilizing the Catia V5 Electrical and Sheet Metal Work Benches. Must have intimate knowledge of an ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements, while meeting all installation and maintainability requirements. Candidate must possess knowledge of regulatory guidance material relative to aircraft harness design. Excellent verbal and written communication skills, and computer skills (Catia V5, Catia V4, PC/MS Office) are required.



Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of  products and services

Principal Duties and Responsibilities:
Essential Functions
:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

 Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned



 

Education and Experience Requirements:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.



Other Requirements:

1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline


 
Job Number: 1710073229
Job Location: Savannah, GA
Duration: 6 months
Input Date: 01/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Jyotsna Sivan
Address: 900 CIRCLE 75 PKWY SE STE 600
City, State: ATLANTA, GA 30339
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023FlGAAU&URLSource=cjhunter

Electrical PM&P Engineer 4

Description:
** Secret Clearance Required to Start **

Electrical Parts Materials & Processes (PM&P) Engineer

The Strategic Missile & Information Systems Parts Materials & Processes (PM&P) team is a Specialty Engineering function which provides expertise in EEE, mechanical, metallic and non-metallic parts, materials and related processes as well as survivability. The PM&P subject matter experts are responsible for working with program designers, IPTs and subcontractors to select parts, materials and processes that meet program designated PM&P requirements along with supporting part testing, failure analysis and mitigation development as well as performing supplier compliance assessments and development of all required plans. Additionally, the subject matter experts will support all Parts, Materials, & Processes Control Board (PMPCB) related functions including reviewing of Non-Standard Part Approval Requests and relevant data, PMPCB working groups and board meetings and interfacing with both the customer and subcontractors in support of the PMPCB.
- Field of expertise must be electrical engineering, materials science and/or engineering, physics or equivalent. Applicants must have prior knowledge of military and industry parts and materials specifications, bills of materials, obsolescence, and have coordinated activities with suppliers.
- It is desired that applicants have prior experience working with defense contractors, parts, materials, & processes mission assurance plans. Some working knowledge of ionizing radiation effects and testing is also preferred.

Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.
 
Job Number: 372767
Job Location: Huntsville, AL
Rate: TBD
Duration: 6 - months
Start Date: ASAP
Input Date: 01/23/2018
Firm Name: CTS INTERNATIONAL
Address: 11100 NE 8TH ST STE 800
City, State: BELLEVUE, WA 98004
Phone: 425/646-2688
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com

Electrical PM&P Engineer 5

Description:
**Interim Secret Clearance required to start**

This position will be responsible for reviewing electromechanical, electromagnetic and electrical (EEE) parts against the Parts, Materials and Processes (PMP) program requirements for applicability in the Redesigned Kill Vehicle. Reviews will include assessment of the part for the design, reviewing test data including but not limited to DPA, PIND, etc.. and reviewing failure analysis data if applicable. Additionally, supplier compliance assessments will be performed on mission critical suppliers.

Coordinates definition of complex requirements for materials, parts and processes used in the manufacture of products. Establishes standards for specifications and other documents to manage the deployment of materials, parts and processes. Represents the Company on technical committees to develop and revise industry standards. Promotes standardization across the Company. Leads evaluation of emerging technologies for potential application to business needs. Establishes standards to qualify new materials, parts and processes to meet requirements. Leads integration of new technologies. Reviews and approves test and audit programs to qualify suppliers to applicable requirements. Coordinates complex analysis to determine reasons for failures of materials, parts or processes. Coordinates broadly based corrective and preventive actions. Leads design, development and qualification of sophisticated computer and production systems to satisfy user requirements. Works under consultative direction.
Bachelor's degree with 14 or more years' experience, Master's degreee with 12 or more years' experience or PhD with 9 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.
 
Job Number: 372817
Job Location: Huntsville, AL
Rate: TBD
Duration: 3 - months
Start Date: ASAP
Input Date: 01/23/2018
Firm Name: CTS INTERNATIONAL
Address: 11100 NE 8TH ST STE 800
City, State: BELLEVUE, WA 98004
Phone: 425/646-2688
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com

Electrical Power System Engineer

Description:
• System Certification Requirements: Cert Plan, Flight Test Plan, Flight Test Report, Qual Test Report, Lab test report, Testing requirements/Flight Clearance and or SOF Requirements, development testing
• Hardware Qualification: Plans, procedures, Reports, conformity, ATP & Outline Drawings
• Software Certification: Experience reviewing PSAC, CIA, SAS.
• Experience in software V&V.

Required Experience in the following:
• Electrical Power Generation, control and indicating
• Secondary Power Distribution, control and indicating
• Solid State Electrical Power.

Desired Experience in the following:
• Working Knowledge ARP4754 and CFR 25
• Project Management

Skills/Experience:
• Configuration change management
 
Job Number: 24-174
Job Location: Savannah, GA
Rate: $58 - $63
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 01/23/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Email: matt@precisionpersonnel.com
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Power-Loads Engineering Contractor - Special Missions

Description:
UNIQUE SKILLS
Required Experience in the following:
• Electrical Power Generation, control and indicating
• Power Distribution, control and indicating
• Electrical Load Analysis

JOB DESCRIPTION
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs. in the specific technical discipline or 10 yrs. broad engineering experience in several technical disciplines with Bachelors, or 3 yrs. in the specific technical discipline with Masters, or 1 yr. in the specific technical discipline with PhD. Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of client products and services

PRINCIPAL DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

ADDITIONAL FUNCTIONS
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

OTHER REQUIREMENTS
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
Desired Experience in the following:
• Working Knowledge ARP4754 and CFR 25
• Project Management Skills/Experience
• Configuration change management
 
Job Number: 17-742-103561
Job Location: Southeast
Rate: $58.00 to $63.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 12/20/2017
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

Engineering, Aviation, Design -- Multiple Openings

Description:
Contact for details

-Holiday Pay
-Longevity Pay
-Medical/Dental Insurance
-Weekly Pay
-Identity Theft Protection
-401(k) Immediate Enrollment
-Direct Deposit

PDS is an equal opportunity employer
EOE M/F/D/V (minorities, female, disabled, veterans)
 
Job Location: Savannah, GA
Input Date: 01/02/2018
Firm Name: PDS TECHNICAL SERVICES
Address: 3922 COCONUT PALM DR STE 100
City, State: TAMPA, FL 33601
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: www.pdstech.com

Electrical Sub-Assembler 1

Description:
PDS Tech, Inc is seeking a candidate for the Electricak Sub-Assembler 1 position located in McClellan, CA.  
Builds up and assembles units in the production of light rail vehicles, locomotives and coaches such as, but not limited to, roofs, cable harnesses, mounts parts, electrical racks and panels, including air supply racks and piping assemblies. 
Connects wires between individual component leads and other components, connectors, terminals, and contact points. 
Makes electrical wire terminations. 
Cuts wire to specified lengths and routes, combs, twists, wraps, ties, and attaches wire to terminal points. 
Disassembles, modifies, reworks, refurbishes, reassembles as required. 
Performs tasks that require knowledge of a combination of processes, operations and equipment. 
Duties may consist of, but not limited to, working from production blueprints, wiring diagrams, parts lists, wire lists, sketches and verbal instructions to produce electrical or Electro-Mechanical subassemblies. 
Frequently required to use fine motor skills, assembling some small parts with excellent dexterity. 
Ability to sit at a workstation for extended periods. 
Identifies and reports problems to Group Lead or Manager. 
Uses hand and power shop tools. Certification of some tools and equipment may be required, such as but not limited to crane and forklift operations. 
Able to routinely interact with other employees from supporting functions. 
Meet internal Company standards for quality and workmanship. 
Expected to contribute and maintain conditions that will ensure a healthy and safe working environment. 
May be required to work overtime, weekends, and/or different shifts as necessary to meet business critical requirements. 
Must be able to work in a fast-paced environment. 
Cross training will be required to cover business needs. 
Other duties as assigned


 
Job Number: 1710075524
Job Location: Mcclellan, CA
Duration: 7 months
Input Date: 01/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Lea Salmo
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023LauAAE&URLSource=cjhunter

Electrical Systems -- Power Generation

Description:
Global 7000/8000

Job location: Toronto, Ontario Canada

Paid Travel
Great Hourly Rates
Direct Deposit
Per Diem
Tax Benefits
Healthcare Options
 
Job Location: Canada
Input Date: 03/27/2017
Firm Name: NORAMTEC CONSULTANTS AMERICAS INC
Attention: Erika
Address: 150 RESEARCH BLVD
City, State: ROCHESTER, NY 14623
Phone: 585/441-9800 x106
Email: erika.legrand@noramtecna.com
Website: www.noramtec.com

Electrical Systems Eng TSI

Description:
PDS Tech is seeking an Electrical Systems Eng TSI for an open position in Savannah, GA.


Position Purpose:



Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services 

Principal Duties and Responsibilities:

Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area 

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned 

Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline


Education and Experience Requirements:


Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.
 

Unique Skills:



Avionics System Integration Experience Required Honeywell Epic System Experience Preferred


 
Job Number: 1710077561
Job Location: Savannah, GA
Duration: 6 months
Input Date: 01/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Clyde Callwood
Address: 3922 COCONUT PALM DR STE 100
City, State: TAMPA, FL 33601
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023QaqAAE&URLSource=cjhunter

Electrical Systems Engineer

Description:
Unique Skills:
• Avionics System Integration Experience Require, Honeywell Epic System Experience Preferred

Position Purpose:
• Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of products and services

Education and Experience Requirements:
• Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Essential Functions:
• Contributes to planning, developing and coordinating of important engineering projects
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
• Acts as liaison with representatives outside of the assigned group/area
• Actively works to improve daily processes and ensures all work meets customer requirements
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
• Performs other duties as assigned
• Advanced degree in engineering related field preferred
• The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 24-215
Job Location: Savannah, GA
Rate: $58 - $63
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 01/23/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Email: matt@precisionpersonnel.com
Website: www.precisionpersonnel.com

Electrical Systems Engineer

Description:
Electrical Systems Engineer

Location: Savannah, GA
Pay Rate: $58/hr - $63/hr
Duration: Long Term W2 Contract
Shift: First

Unique Skills:
-Avionics System Integration Experience Required
-Honeywell Epic System Experience Preferred

Education and Experience Requirements:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

Principal Duties and Responsibilities/Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 8227
Job Location: Savannah, GA
Rate: 58.00-63.00
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 01/17/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: rex@inconen.com
Website: www.inconen.com

Electrical Systems Engineer

Description:
Electrical Systems Engineer

Location: Savannah, GA
Pay Rate: $58/hr - $63/hr
Duration: Long Term Contract
Shift: First

Unique Skills:
Aircraft power / electrical / avionic systems design, integration and implementation. (design, certification and system support)

Job description:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

Principal Duties and Responsibilities/Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 7677
Job Location: Savannah, GA
Rate: 58.00-63.00
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 01/17/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: rex@inconen.com
Website: www.inconen.com

Electrical Systems Engineer

Description:
AutoCAD, cabin management systems, in-flight entertainment

-Holiday Pay
-Medical
-Dental
-Vision
-Short-Term Disability
-Direct Deposit
-401(k) Immediate Enrollment
-Annual Bonus
-Referrals
-Personal Communications
 
Input Date: 01/23/2017
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545, 817/354-5555
800 Phone: 866/758-2494
Email: resumes@agentetech.com
Website: www.agentetech.com

Electrical Technician

Description:
One year in length
Maximum Hourly pay rate $18.00
Tests and troubleshoots electronic products using standard and specialized test equipment. 

1. Troubleshoots electronic products to sub-assembly and component level utilizing schematics and standard troubleshooting practices and procedures 
2. Sets up test equipment and tests electronic products using established test procedures and schematics
3. Provides technical guidance to assemblers and re-work assemblers 
4. Performs cross functional tasks within fairly similar situations resulting in standardized but not identical outcomes

5. Knowledge of the operation and use of electronic production test equipment and hand assembly tools used in a high tech surface mount & through-hole technology manufacturing and production environment
6. Knowledge of advanced electronic test and troubleshooting techniques to component level.
7. Uses product test and measurement equipment, digital/analog voltmeters, oscilloscopes, hi-pot meters, power supplies, and automatic and standard test equipment, etc.
8. Recommends and/or proposes process improvements 
8. Ensures that all relevant quality information/feedback is provided 
10. Utilizes written or visual instructions involving use of quantitative information from specifications, schematics, graphs, pictures, gages, etc.
11. Provides written and/or oral communications concerning a variety of situations following test, troubleshooting, examinations, etc.
12. Keeps workstation, tools and equipment in a neat and orderly manner 
13. Understands and complies with all Company, safety rules and regulations

Requirements/Knowledge: 

v Education Required:
o Associate degree in Electronics (2 year) or certified program (18 mos.) plus 1 year of experience

v Experience 
o 1-3 years of electronics related experience

v Skill Level Required: 
o Skills required in maintaining close specifications using tools & gages, schematics and a variety of electronic equipment 

o Should have a high level of electrical and mechanical aptitude and analytical skills
o Ability to interpret drawing and specifications
o Basic computer skills
o Knowledge of manufacturing processes and how to effectively troubleshoot problems
o Should possess dexterity skills, good hand & eye coordination 
o Willing and able to take and pass basic electronics test 

Desired Qualifications:

v Past experience in a manufacturing environment
v Past experience in a self-directed teaming environment
v Lean manufacturing knowledge
v Understanding of IPC-A-610 standards
 

 
Job Number: 1710063131
Job Location: Bohemia, NY
Duration: 12 months
Input Date: 01/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Eric Khassanov
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002G9j8AAC&URLSource=cjhunter

Electrical Wiring Design Engineer

Description:
General Summary:
 
The Electrical Wiring Design Engineer will perform wiring design and integration tasks associated with the electrical systems of the aircraft.  
Duties and Responsibilities:
  • Creates and maintains aircraft systems wiring diagrams, parts lists, and electrical harness drawings
  • Develops wiring designs for aircraft electrical systems
  • Prepares specifications drawings, process layouts and capacity planning
  • Serves as subject matter expert (technical expert) for the following areas:
    • Electrical Wiring and Harness Design
      • Wiring standards and ‘best practice’ design
      • Wire gauge and type consideration (shield coverage, over-braid, wire twists/foot, temperature, bend radius, insulation, sleeves, etc.)
      • Connector and backshell qualification and selection (EMI, high temperature, high vibration, environmentally sealed/hermetic, connector material compatibility, pin selection, etc.)
      • Miscellaneous electrical harness hardware selection (splices, solder sleeves, grounding blocks, tie wraps, terminal lugs, etc)
      • Development of configuration managed, electrical harness design packages
      • Parts lists, bill of materials, parts and standards callout
      • Fabrication techniques for integrated wiring assemblies
      • Cost, weight, and schedule trade-offs

    • Wire Diagram and harness drawing generation
      • Interpretation of system interface control data to conceptual schematics
      • Evolution of conceptual schematics into aircraft wiring information
      • Use of wiring design tool to generate wiring diagrams and harness drawings

    • System integration as it applies to complex wiring assemblies
      • Good overall working knowledge of aircraft electrical/electronic systems
      • Implementation of wiring and harness level system separation and segregation to avoid common cause failure modes, including electrical signal and power separation
      • Lightning, EMI, and HIRF considerations
      • Databus and digital equipment interface considerations



Qualifications
 
Education, Work Experience, Certification and/or Licensure: 



  • Bachelors’ degree in Electrical Engineering or other directly related technical field from a four year college or university
  • 5 years of directly related work experience or 10 years of directly relevant experience may be considered in lieu of a bachelors’ degree

Knowledge, Skills and Abilities: 

  • Excellent understanding and specification of aircraft electrical harness components selection, harness design requirements, harness level system separation, and system integration at the wiring level required
  • Proficiency with Microsoft Office Suite
  • Proficiency in ERP systems preferably SAP preferred
  • Proficiency in Catia V5 and Teamcenter preferred
  • Experience with IGE-XAO, Mentor Graphics, or other similar wiring design tool
  • Experience with electrical harness routing and installation requirements a plus


Ability to work independently as well as in a multi-functional team environment 


 
Job Number: 1710069581
Job Location: Greensboro, NC
Duration: 12 months
Input Date: 01/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Clyde Callwood
Address: 3922 COCONUT PALM DR STE 100
City, State: TAMPA, FL 33601
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002CmauAAC&URLSource=cjhunter

Electrical Wiring Designer

Description:
Hiring in multiple locations

Email your resume or apply online

Benefits Available
- long term contracts
- top per diem rates
- direct deposit
- referral bonuses
- 401(k) program
 
Input Date: 05/09/2017
Firm Name: NESC STAFFING
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
800 Phone: 800/562-3463
Email: lokeefe@nesc.com
Website: www.nesc.com

Electrical/Aircraft Cabin Interiors & Systems Engineering Contractor

Description:
Electrical/Aircraft Cabin Interiors & Systems Engineer

Location: Savannah, GA
Pay Rate: $58/hr - $63/hr
Duration: Long Term Contract
Shift: First

Unique Skills:
Ideal Candidates will have electrical engineering experience with Aircraft Cabin Interiors and Systems to include but not limited to:
- Cabin Management System
- Cabin Entertainment System
- Cabin Lighting
- Cabin Switch Controls
- Telephone System
- Satellite communications
- Water System
- Waste System
- EWIS
- Cabin interior monuments
- Seats

Education:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area.

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 7428
Job Location: Savannah, GA
Rate: $58-$63
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 01/17/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: rex@inconen.com
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical/Project Engineer

Description:
Electrical/Project Engineer

Location: Windsor Locks, CT
Pay Rate: $58/hr
Duration: 1 year W2 contract
Shift: First, 8:00am to 5:00pm
**MUST be a U.S. CITIZEN**

Description/Comment:
Manages a team and provides direction on research, development, design, and testing of electrical components, PC Board Layout, Electronics Packaging equipment, facilities, systems, products and networks for commercial, industrial and governmental purposes.

Additional Job Details:
The Human Exploration & Launch business within ISR & Space Systems provides Environmental Control and Life Support Systems in deep space, low earth orbit, undersea, and on the ground. Our hardware is paramount to survival in harsh environments, and our passion for our work demands excellence in everything we do, from the talent we recruit to the highly-engineered systems we deliver. We value people, integrity, ideas and performance. This posting is for a project engineering position at this Company – ISR & Space Systems in Windsor Locks, CT supporting various platforms.
The candidate will work within an Integrated Product Development Team to support the design and development of various electronic controls; will work with the Project Engineer to execute project to meet schedule and budget milestones; and will collaborate with a wide variety of functional areas inside and outside the organization to ensure successful completion of program requirements.

Education
Candidate will have BS in Electrical Engineering with 4 years of working experience in the aerospace industry.

Responsibilities
• Coordinate Integrated Product Development Team activities (design, procurement, fabrication and test)
• Assist Control Account Managers with Earned Value Management (EVMS) by monitoring program cost and schedule performance
• Assist Control Account Manager with Estimate to Complete
• Coordinate activities associated with review and approval of engineering specifications and engineering drawings
• Initiate and process Engineering Changes working with all engineering disciplines to implement approved changes. This will include marking drawings, copying prints, creating PDF’s to support Company electronic Engineering Change process.
• Coordinate, track and support the assembly and test of development hardware
• Support supplier selection and part procurement
• Provide status reports
• Support program reviews both internal and external
• Coordinate closure of action items
• Support operations to fabricate, assemble, test and qualify flight hardware
• Ensure standard work flow maps are complete
• Document activities and programs worked with time spend on various activities. This information will be submitted weekly and summed monthly by person with the monthly invoice.

Skills/Experience
• Ability to perform as part of a cross-functional team and coordinate the activities of various engineering disciplines including electrical and mechanical design, systems, components, materials development, process development, and supplier development
• Strong project management, organizational and prioritization skills
• Ability to work independently or as part of an integrated product team
• Able to understand electrical circuitry and able to recommend trouble shooting test steps to the stakeholders
• Ability to read and understand technical manuals, blueprints or drawings
• Prepare test plans, analyze test data, and prepare reports to support project activity, and maintain up-to-date records of project test results
• Understanding Earned Value Management Basics
• Strong troubleshooting and problem solving skills
• Must understand fundamentals of Root Cause Analysis
• Interface with shop floor personnel for the purpose of communicating technical, quality, and inspection information
• Strong written and verbal skills including thorough knowledge of Microsoft Office products
 
Job Number: 8278
Job Location: Windsor Locks, CT
Rate: 58
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 12/18/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Electro-Mechanical Design Engineer

Description:
Electro-Mechanical Design Engineer
PDS is looking for experienced Electro-Mechanical Engineers in the Phoenix area
Duties
Electro-Mechanical Design Engineer  Individual will be responsible for the hardware development for missile, satellite  and / or fire control electronics and general packaging support. Activity will require: 

Cross functional coordination to complete hardware design effort to support hardware integration for the designed weapon system. 

Research, development and design of components, equipment and networks for military applications.

Basic Qualifications

- Must be able to obtain a security clearance 
- Candidate must have a Bachelor’s degree from an accredited college in a related discipline with a minimum 3.0 GPA
- 3D modeling tools (example would be Pro-E/CREO, Catia, Solidworks or similar)

Desired skills

- Working knowledge of harness design and development.
- Working knowledge of printed wiring board and surface mount technologies is desired.
- Exposure to, or experience with, Pro/Cable for harness development and Cadence for PWB design is a plus.
- Working knowledge of military hardware specifications is desired.
- Desired design experience includes chassis, electro-mechanical assembly, electrical cable and/or network design. Able to interpret electrical schematics for harness development a plus.

 

 



 
Job Number: 1710065209
Job Location: Phoenix, AZ
Duration: 12 months
Input Date: 01/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: David Goodman
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i500000021WJmAAM&URLSource=cjhunter

Electro-Mechanical Design Engineer

Description:
Electro-Mechanical Design Engineer
PDS is looking for experienced Electro-Mechanical Engineers in the Los Angeles area
Duties
Electro-Mechanical Design Engineer  Individual will be responsible for the hardware development for missile, satellite  and / or fire control electronics and general packaging support. Activity will require: 

Cross functional coordination to complete hardware design effort to support hardware integration for the designed weapon system. 

Research, development and design of components, equipment and networks for military applications.

Basic Qualifications

- Must be able to obtain a security clearance 
- Candidate must have a Bachelor’s degree from an accredited college in a related discipline with a minimum 3.0 GPA
- 3D modeling tools (example would be Pro-E/CREO, Catia, Solidworks or similar)

Desired skills

- Working knowledge of harness design and development.
- Working knowledge of printed wiring board and surface mount technologies is desired.
- Exposure to, or experience with, Pro/Cable for harness development and Cadence for PWB design is a plus.
- Working knowledge of military hardware specifications is desired.
- Desired design experience includes chassis, electro-mechanical assembly, electrical cable and/or network design. Able to interpret electrical schematics for harness development a plus.

 

 



 
Job Number: 1710065207
Job Location: Los Angeles, CA
Duration: 12 months
Input Date: 01/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Karla Pelonis
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i500000021WJcAAM&URLSource=cjhunter

Electro-Mechanical Design Engineer

Description:
Electro-Mechanical Design Engineer
PDS is looking for experienced Electro-Mechanical Engineers in the San Jose area
Duties
Electro-Mechanical Design Engineer  Individual will be responsible for the hardware development for missile, satellite  and / or fire control electronics and general packaging support. Activity will require: 

Cross functional coordination to complete hardware design effort to support hardware integration for the designed weapon system. 

Research, development and design of components, equipment and networks for military applications.

Basic Qualifications

- Must be able to obtain a security clearance 
- Candidate must have a Bachelor’s degree from an accredited college in a related discipline with a minimum 3.0 GPA
- 3D modeling tools (example would be Pro-E/CREO, Catia, Solidworks or similar)

Desired skills

- Working knowledge of harness design and development.
- Working knowledge of printed wiring board and surface mount technologies is desired.
- Exposure to, or experience with, Pro/Cable for harness development and Cadence for PWB design is a plus.
- Working knowledge of military hardware specifications is desired.
- Desired design experience includes chassis, electro-mechanical assembly, electrical cable and/or network design. Able to interpret electrical schematics for harness development a plus.

 

 



 
Job Number: 1710065206
Job Location: San Jose, CA
Duration: 12 months
Input Date: 01/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Karla Pelonis
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i500000021WJXAA2&URLSource=cjhunter

Electro-Mechanical Design Engineer

Description:
Electro-Mechanical Design Engineer
PDS is looking for experienced Electro-Mechanical Engineers in the San Diego area
Duties
Electro-Mechanical Design Engineer  Individual will be responsible for the hardware development for missile, satellite  and / or fire control electronics and general packaging support. Activity will require: 

Cross functional coordination to complete hardware design effort to support hardware integration for the designed weapon system. 

Research, development and design of components, equipment and networks for military applications.

Basic Qualifications

- Must be able to obtain a security clearance 
- Candidate must have a Bachelor’s degree from an accredited college in a related discipline with a minimum 3.0 GPA
- 3D modeling tools (example would be Pro-E/CREO, Catia, Solidworks or similar)

Desired skills

- Working knowledge of harness design and development.
- Working knowledge of printed wiring board and surface mount technologies is desired.
- Exposure to, or experience with, Pro/Cable for harness development and Cadence for PWB design is a plus.
- Working knowledge of military hardware specifications is desired.
- Desired design experience includes chassis, electro-mechanical assembly, electrical cable and/or network design. Able to interpret electrical schematics for harness development a plus.

 

 



 
Job Number: 1710065205
Job Location: San Diego, CA
Duration: 12 months
Input Date: 01/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Karla Pelonis
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i500000021WJIAA2&URLSource=cjhunter

Electro-Mechanical Design Engineer

Description:
Electro-Mechanical Design Engineer
PDS is looking for experienced Electro-Mechanical Engineers in the Houston area
Duties
Electro-Mechanical Design Engineer  Individual will be responsible for the hardware development for missile, satellite  and / or fire control electronics and general packaging support. Activity will require: 

Cross functional coordination to complete hardware design effort to support hardware integration for the designed weapon system. 

Research, development and design of components, equipment and networks for military applications.

Basic Qualifications

- Must be able to obtain a security clearance 
- Candidate must have a Bachelor’s degree from an accredited college in a related discipline with a minimum 3.0 GPA
- 3D modeling tools (example would be Pro-E/CREO, Catia, Solidworks or similar)

Desired skills

- Working knowledge of harness design and development.
- Working knowledge of printed wiring board and surface mount technologies is desired.
- Exposure to, or experience with, Pro/Cable for harness development and Cadence for PWB design is a plus.
- Working knowledge of military hardware specifications is desired.
- Desired design experience includes chassis, electro-mechanical assembly, electrical cable and/or network design. Able to interpret electrical schematics for harness development a plus.

 

 



 
Job Number: 1710065208
Job Location: Houston, TX
Duration: 12 months
Input Date: 01/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: David Goodman
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i500000021WJhAAM&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electromechanical Design Engineer

Description:
Electromechanical Design Engineer

Location: Orlando, FL
Pay Rate: DOE ($45/hr - $55/hr)
Duration: 1 year W2 contract
Shift: not specified
**MUST be a U.S. CITIZEN**

Duties:
-An Electromechanical Design Engineer is responsible for the design, documentation and production floor support of hardware (missile electronics, missile electrical cabling, airborne support equipment, ground support equipment and test sets).
-Additional duties include investigation of discrepant hardware and test anomalies.

Skills Required:
-Must have at minimum a Bachelor of Science degree in an Engineering related discipline.
-Design experience with electrical cables, test sets, breakout boxes, 19” support equipment rack design
-Proficiency with Creo Parametric 2.0 Cabling and Intralink.
-Proficiency with ASME Y14.5M-1994 and generating detailed engineering drawings.
-Proficiency with reading schematics for electrical cable assemblies in order to define and select connectors, backshells, splices, wiring, etc.
-Basic computer skills and a working knowledge of Microsoft Office products (Word and Excel)
-Compliance to quality and safety policies at all times!
-Must be a US Citizen
-Physical Requirements – This work requires delicate handling, reaching, light lifting and may require a combination of sitting and standing as well as walking between test locations and occasional use of small step-ladders.
DESIGN ENGINEER CREO CABLING ASME/ANSI READING SCHEMATICS

Desired:
-Experience with design of flexible and semi-rigid RF cables

Education:
-Must have at minimum a Bachelor of Science degree in an Engineering related discipline.
 
Job Number: 8364
Job Location: Orlando, FL
Rate: 45-55
Per Diem: Split Possible
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 01/09/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Electronic Troubleshooter

Description:
Tests and troubleshoots electronic products using standard and specialized test equipment. 

1. Troubleshoots electronic products to sub-assembly and component level utilizing schematics and standard troubleshooting practices and procedures 
2. Sets up test equipment and tests electronic products using established test procedures and schematics
3. Provides technical guidance to assemblers and re-work assemblers 
4. Performs cross functional tasks within fairly similar situations resulting in standardized but not identical outcomes

5. Knowledge of the operation and use of electronic production test equipment and hand assembly tools used in a high tech surface mount & through-hole technology manufacturing and production environment
6. Knowledge of advanced electronic test and troubleshooting techniques to component level.
7. Uses product test and measurement equipment, digital/analog voltmeters, oscilloscopes, hi-pot meters, power supplies, and automatic and standard test equipment, etc.
8. Recommends and/or proposes process improvements 
8. Ensures that all relevant quality information/feedback is provided 
10. Utilizes written or visual instructions involving use of quantitative information from specifications, schematics, graphs, pictures, gages, etc.
11. Provides written and/or oral communications concerning a variety of situations following test, troubleshooting, examinations, etc.
12. Keeps workstation, tools and equipment in a neat and orderly manner 
13. Understands and complies with all Company, safety rules and regulations

Requirements/Knowledge: 

v Education Required:
o Associate degree in Electronics (2 year) or certified program (18 mos.) plus 1 year of experience

v Experience 
o 1-3 years of electronics related experience

v Skill Level Required: 
o Skills required in maintaining close specifications using tools & gages, schematics and a variety of electronic equipment 

o Should have a high level of electrical and mechanical aptitude and analytical skills
o Ability to interpret drawing and specifications
o Basic computer skills
o Knowledge of manufacturing processes and how to effectively troubleshoot problems
o Should possess dexterity skills, good hand & eye coordination 
o Willing and able to take and pass basic electronics test 

Desired Qualifications:

v Past experience in a manufacturing environment
v Past experience in a self-directed teaming environment
v Lean manufacturing knowledge
v Understanding of IPC-A-610 standards
 
Tests and troubleshoots electronic products using standard and specialized test equipment. 

1. Troubleshoots electronic products to sub-assembly and component level utilizing schematics and standard troubleshooting practices and procedures 
2. Sets up test equipment and tests electronic products using established test procedures and schematics
3. Provides technical guidance to assemblers and re-work assemblers 
4. Performs cross functional tasks within fairly similar situations resulting in standardized but not identical outcomes

5. Knowledge of the operation and use of electronic production test equipment and hand assembly tools used in a high tech surface mount & through-hole technology manufacturing and production environment
6. Knowledge of advanced electronic test and troubleshooting techniques to component level.
7. Uses product test and measurement equipment, digital/analog voltmeters, oscilloscopes, hi-pot meters, power supplies, and automatic and standard test equipment, etc.
8. Recommends and/or proposes process improvements 
8. Ensures that all relevant quality information/feedback is provided 
10. Utilizes written or visual instructions involving use of quantitative information from specifications, schematics, graphs, pictures, gages, etc.
11. Provides written and/or oral communications concerning a variety of situations following test, troubleshooting, examinations, etc.
12. Keeps workstation, tools and equipment in a neat and orderly manner 
13. Understands and complies with all Company, safety rules and regulations

Requirements/Knowledge: 

v Education Required:
o Associate degree in Electronics (2 year) or certified program (18 mos.) plus 1 year of experience

v Experience 
o 1-3 years of electronics related experience

v Skill Level Required: 
o Skills required in maintaining close specifications using tools & gages, schematics and a variety of electronic equipment 

o Should have a high level of electrical and mechanical aptitude and analytical skills
o Ability to interpret drawing and specifications
o Basic computer skills
o Knowledge of manufacturing processes and how to effectively troubleshoot problems
o Should possess dexterity skills, good hand & eye coordination 
o Willing and able to take and pass basic electronics test 

Desired Qualifications:

v Past experience in a manufacturing environment
v Past experience in a self-directed teaming environment
v Lean manufacturing knowledge
v Understanding of IPC-A-610 standards
 
 
Job Number: 1710066458
Job Location: Bohemia, NY
Duration: 12 months
Input Date: 01/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Eric Khassanov
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000021ioWAAQ&URLSource=cjhunter

Electronics Assembler (6) - RI

Description:
Chipton-Ross is seeking an Electronics Assembler (6) for an opening in Ashaway, RI.

Under the direction and guidance of the Production Supervisor, the Electronics Assembler, routes, wires, assembles and installs electrical and electronic components in military sonar systems and commercial equipment according to specifications, using fixtures and jigs, hand tools and equipment. Reads work instructions, drawings and specifications to determine assembly methods. Solders surface mount components to printed wiring using microscopes and hand soldering devices.

RESPONSIBILITIES:
Essential Functions:
1. Responsible for assembling and handling products, equipment and materials per engineering and company's quality system procedures.
2. Perform program specific tasks as required to ensure compliance to individual program requirements.
3. Assemble printed wiring boards from engineering drawings and sketches using surface mount hardware, soldering irons and microscope.
4. Cut wire to specified lengths, using wire cutters.
5. Cut plastic sleeves and slip sleeves over wire ends to insulate connections.
6. Crimp terminal eyelets and lugs to wire ends, using hand or machine crimping device.
7. Route, comb, twist, wrap, tie and attach wire to terminal points, according to layout, using soldering iron and hand tools.
8. Connect wiring to accessories, such as connectors, circuit breakers, plugs and switches and install accessory assemblies in electrical or electronic units, using soldering iron and hand tools.
9. Conducts functional and continuity tests of electrical assemblies, components, wire harness and plugs, using ohmmeter, test lights and other electrical testing instruments.
10. Pot or encapsulate electrical and electronic components and assemblies.
11. Follow company procedures for corrective action. Notify Production supervisor if a defect is identified to obtain guidance and assistance in resolving the problem.
12. Responsible for following procedures for product assembly/fabrication, equipment operation and sound safety requirements as documented in the company's quality system.
13. Promote cordial relationships and foster and maintain a favorable business profile with customers, suppliers, co-workers, industry and professional associations, government agencies and the local community.

REQUIRED EXPERIENCE:
Certificates and Licenses Required:
-Valid state drivers license.
Knowledge, Skills and Abilities:
1. Ability to speak, read and write the English language.
2. Ability read and interpret work instructions, engineering drawings and sketches and specifications to determine assembly methods for electrical and electronic components.
3. Ability to follow instructions; ability to mentally visualize and comprehend all aspects of assembling equipment or tooling problem and understand the interrelationships of factors affecting a situation.
4. Ability to comprehend and apply modern fabrication and assembly techniques and machine shop practices and techniques.
5. Ability to communicate effectively orally; good interpersonal skills; pays attention to detail; and ability to meet deadlines.

ADDITIONAL EXPERIENCE:
1. Ability to speak, read and write the English language.
2. Ability read and interpret work instructions, engineering drawings and sketches and specifications to determine assembly methods for electrical and electronic components.
3. Ability to follow instructions; ability to mentally visualize and comprehend all aspects of assembling equipment or tooling problem and understand the interrelationships of factors affecting a situation.
4. Ability to comprehend and apply modern fabrication and assembly techniques and machine shop practices and techniques.
5. Ability to communicate effectively orally; good interpersonal skills; pays attention to detail; and ability to meet deadlines.

Physical Demands:
1. Exerts up to 20 to 50 lbs. of force occasionally, or up to 10 to 25 lbs. of force frequently, or up to 10 lbs. of force constantly to move objects.
2. Excellent manual dexterity is required to operate the technical instruments and equipment appropriate to assembly.
3. Employee regularly sits while using upper body movements including arms, hands and fingers constantly in handling tools and equipment necessary to assemble and install electrical and electronics components in military sonar systems and commercial equipment. Also, working on computers and other office equipment.
4. Employee occasionally stands and/or walks and reaches with hands and arms in moving tools, equipment and/or products.

Other Work Conditions and Requirements:
1. Employee works in a quiet to moderately noisy environment.
Network Analysis:
1. Directly provides support to the Engineering and Operations Departments.
Scope information:

PREFERRED EXPERIENCE:
Experience preferred in related field, but not necessary.


EDUCATION:
Accredited High School Diploma/GED

WORK HOURS:
9/80, Full-Time
 
Job Number: 164681
Job Location: Ashaway, RI
Rate: $15 to $22.00 DOE
Duration: 2 Months
Input Date: 01/23/2018
Firm Name: CHIPTON ROSS
Attention: Christian Martinez-Salceda
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: cmartinez@chiptonross.com
Website: www.chiptonross.com

Electronics Technician

Description:
Chipton-Ross is seeking a Electronics Technician in Santa Barbara, CA.

Description
Provides engineering hardware fabrication support, troubleshooting, testing and basic Laboratory operations responsibility. These responsibilities will include fabrication of electronic/electrical chassis' and mechanical rack fabrication using development engineering drawings. Candidate must be capable of working independently, discussing technical issues with customers and working with vendors.

Skill/Experience/Education
Mandatory:
Integrated Circuit Layout Technician. SBF is seeking an experienced integrated circuit technician to help advance the state of the art in infrared and visible imager readout integrated circuits (ROICs). Significant experience with physical layout of mixed signal VLSI CMOS transistor level designs is required. The selected candidate will perform silicon layout of analog and digital submicron transistor level designs in support of advanced infrared cameras and imagers. Designs include ultralow noise analog circuit blocks, low power analog to digital conversion, high speed multi GHz data transmission and serializers. MUST HAVE CMOS integrated circuit layout experience.

Desired:
Schematic capture, design verification and simulation.
 
Job Number: 165226
Job Location: Santa Barbara, CA
Rate: $DOE
Duration: 12 months
Input Date: 01/23/2018
Firm Name: CHIPTON ROSS
Attention: Brent Sizemore
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: bsizemore@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer

Description:
Major purpose:
We are currently seeking a Senior Software Engineer with experience writing embedded software. This individual will have the opportunity to work on Infrared Product lines, responsible for a variety of software tasks throughout the full lifecycle. Responsibilities include designing, coding, documenting, and testing C and C++ applications/systems. General knowledge of hardware and communication protocols is a huge plus.
Major functions:

Technical/Functional skills:
Education/Experience/Licenses etc.: Required Competencies/Skills:
• Experience using C/C++ to develop embedded software
• Experience with Real-Time Operating Systems (FreeRTOS a plus)
• Excellent verbal and written communication skills
• Demonstrated ability to work as part of a team
• 6+ years of experience
• Minimum of BS in Computer Engineering, Electrical Engineering, Computer Science or similar

Preferred Competencies/Skills:
• Experience with Communication Protocols (Ethernet, RS422, CoaXpress, Camera Link, GigE Vision, etc.)
• Experience working with other programming languages such as C#, MATLAB, Python, etc.
• Experience in the Defense, Space, Aerospace, or similar industries
• Experience using Quartus and Altera/Client tools
• Experience using electronic test equipment such as oscilloscopes, DMMs, and basic lab equipment
• Experience with Linux and Windows Development Environments
• Basic knowledge of circuits, schematics, and hardware design
 
Job Number: 17-53009
Job Location: Mason, OH
Rate: 65.00 - 85.00
Per Diem: No
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 12/07/2017
Firm Name: NESCO RESOURCE
Attention: Sebastian Hernandez
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

Embedded Software Engineer - Level 3

Description:
Embedded Software Engineer - Level 3

Location: Archbald, PA
Pay Rate: DOE ($40/hr - $55/hr)
Duration: 1 year contract
Shift: First, 9/80, OT
Travel: Possible occasional travel to customer or vendor sites
**MUST be a U.S. CITIZEN**
**MUST be ELIGIBLE for a SECRET CLEARANCE – ACTIVE SECRET CLEARANCE PREFERRED**

Description
-Designs, develops, operates, and maintains software and firmware components and computing systems software to be applied to and integrated with engineering, scientific, and manufacturing requirements.
-Applies the appropriate standards, processes, procedures, and tools throughout the system development life cycle to support the generation of such engineering applications and products such as laboratory simulation systems, airplane flight control and display systems, avionics, mechanical and electrical systems, weapons armament, commercial and military aircraft systems, mobile and ground-based defense systems, space systems, and other systems and applications of this nature.
-Interfaces with customers, suppliers, application users, and other technical and support personnel.

Skill/Experience/Education (Mandatory):
- C/C++ programming: (6-8 years' experience required)
-Embedded software: (6-8 years' experience required)
-Hardware/software integration: (4-5 years' experience required)
-Software documentation experience
-Software verification experience
 
Job Number: 7788
Job Location: Archbald, PA
Rate: 40-55
Per Diem: Split Possible
Overtime: Yes
Duration: 1 year
Start Date: ASAP
Input Date: 01/17/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: rex@inconen.com
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software engineer (UAV Controls)

Description:
Role: Embedded Software engineer (UAV Controls)
Location: Sterling, VA 20164 - 7104
Duration: 12+ Months Contract
Could be contract to hire for the right candidate

Please Note: 'U.S. Citizens OR Permanent Residents and those authorized to work in the U.S. are encouraged to apply. We are unable to sponsor at this time.'
No vendors!! Direct consultants only please.

Role Description: Develop an integrated inertial navigation system and flight control system for an unmanned aerial vehicle. This includes software for a board support package, framework, vehicle state estimation, autopilots and mission planning.

Position responsibilities:
• Design, code, test, and provide ongoing support for embedded systems software to meet technological and customer requirements
• Define and analyze system software design requirements and write software requirements documents to meet defined and anticipated customer needs and system quality and performance standards
• Write software integration and test plans; conduct and lead software verification, testing and integration efforts to identify required modifications and ensure optimum system performance at delivery
• Collaborate with electrical engineers in planning, design and development of systems to ensure software and hardware performance and compatibility
• Develop interface definitions in conjunction with design team and enforce interface control documents to record and validate system performance standards and results
• Lead and participate in software Design Reviews to ensure team progress against milestones are met and to maintain highest quality level within project schedules
• Serve as technical lead on projects as assigned, working with customers to meet deliverables and address and resolve technology or system issues
• Must demonstrate the ability to maintain professional demeanor at all times and under all circumstances;
• Effectively manage multiple priorities and deadlines; exceptional interpersonal, written, and verbal communication skills;
• Strong customer service, quality, and team orientation; organizational skills and detail focus;
• Self motivation, self direction, and able to work independently; and a commitment to continuous improvement of knowledge, skills and abilities

Required skills/Experience for Embedded UAV Controls Software Engineer
• 4 year degree in an applicable STEM field REQUIRED
• MINIMUM of 3-4 years of experience in embedded software development
• Real Time Embedded Software, C/C++
• Windows Forms, GUI development, C#
• DO-178B Requirements/Development/Test
• OMAP/ARM/PowerPC
• Embedded Linux/GCC/GDB
• GreenHills Integrity and MULTI, uCOS, VectorCast C
• Control Systems/Inertial Navigation Systems/Engine Control
• Interfaces - Serial/CANBus/Ethernet/I2C
• ClearCase/ClearQuest
 
Job Number: 52875
Job Location: Sterling, VA
Rate: open
Per Diem: possible
Overtime: possible
Duration: 12+ months
Start Date: asap
Input Date: 12/07/2017
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Arun
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com