Job Search Results

763 listings were found that matched your search words: Keywords: Mechanical ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2018/07/17 Tuesday 10:34AM Pacific Time by ContractJobHunter. )

Listings 1 - 763

Go To My Job Tracker

Expand all descriptions

1st Shift

Description:
Perform maintenance in support of manufacturing facility on a variety of equipment throughout facility including machinery repairs, preventative maintenance, machine relocation, fabrication, welding, electrical repair and installation, plumbing (air, hydraulic, water) with use of a variety of equipment.  Responsible for monitoring hazardous waste for removal, maintenance of chemical storage area and clean up of chemical spills as required.  Nontoxic or non-hazardous.  Mainly Soap and/or grease
Will be operating a crane or fork lift.
 
Responsibilities:
Provide maintenance support in all areas of manufacturing facility including but not limited to machinery repairs, preventative maintenance, machine relocation, fabrication, welding, electrical repair and installation, plumbing (air, hydraulic, water) with use of a variety of equipment such as hand tools, welding equipment, fork lifts, and precision measuring equipment.  Maintain and develop preventative maintenance program for production related equipment.  Required to perform work in compliance to all safety and EHS policies and procedures. 
 
Qualifications:
  • Knowledge of EHS procedures and policies
  • Knowledge and safe use of production related equipment
  • Working knowledge and use of welding, electrical, and plumbing equipment including repair and maintenance of machinery
  • Millwright Skills and familiar with Electrical and/or Hydraulic
  • Able to interpret OEM handbooks and/or plant diagrams
  • Understanding of reading building plans and electrical schematics
  • Ability to use trouble-shooting and precision measuring equipment
  • Where applicable, trained in maintenance processes such as but not limited to welding, plumbing, electrical and mechanical troubleshooting
  • Vocational or technical training in a maintenance related discipline, strongly preferred

 
Training requirements:

  • Demonstrated ability to comply to maintenance safety procedures such as lock-out tags, etc.
  • Demonstrate ability to safely complete job tasks utilizing manual equipment as well as use of gauges needed for repair fabrication
  • Demonstrate ability to perform preventative maintenance, and repair of facilities equipment
  • Where applicable, complete safety and maintenance training and or certification

 
 
 
 
 

 
Job Number: 1610061453
Job Location: Las Vegas, NV
Duration: 12 months
Input Date: 12/19/2016
Last Updated: 07/17/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Eric Khassanov
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002G2BqAAK&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2297 - DESIGN ENGINEER - CABINET DETAILED DESIGN - cv word doc only

Description:
Act as a specialist in aircraft interior cabinets;

Search for information related to project assignment to the interior and exterior of the aircraft;

Manage customer requests related to customizations of interior options;

Establish technical requirements, mechanical and electrical interfaces and design, integrate, certify, test and troubleshoot the systems described above;

Assume responsibility for Definition engineering deliverables and milestones that the department must meet;

Bachelor's Degree in Mechanical or Equivalent Engineering or college.

Excellent knowledge in design and development of concepts using graphic design software.

Collaborate with others in a multidisciplinary team, adapt easily to changes and customer focused.

Customer focused, problem-solving and innovative focus as well;

Experienced with the CATIA V5 3D design tool;

Well organized and project focused.

Good oral and written communication skills in English and French;

Autonomous, flexible and results-oriented through project management skills;

Experience in the design or installation of cabinets to be assembled.
 
Job Number: 2297
Job Location: Montreal, Canada
Rate: 56.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/08/2017
Last Updated: 12/19/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2299 - FLAMMABILITY ANALYST - cv. word doc only

Description:
Analyze engineering drawings (2D and 3D) in order to establish the configurations to be tested

Prepare test plans and compile tests results in technical reports

Witness flammability tests in the department lab

Understand and apply airworthiness flammability standards of Transport Canada, FAA and EASA, particularly FAR 25.853

Provide flammability expertise to engineering teams and other departments of the Global Completion Center

Solve technical problems related to flammability of the Global business jet interiors

Support the production unit of the Global Completion Center Flammability team

DEC or university degree in mechanical engineering or aerospace

Experience in engineering or aircraft interiors

Ability to analyze engineering drawings

Good knowledge of Office tools (Excel, Access, Word)

A team player and you have capacity to work under pressure

Have Problem solving skills

Excellent communication skills (French & English)

Knowledge of the Federal Aviation Regulations (FAR), more specifically FAR 25.853, an asset

Experience with CATIA V5, an asset
 
Job Number: 2299
Job Location: Montreal, Canada
Rate: 60.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 01/04/2018
Last Updated: 01/26/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2303 - PROPULSION SYSTEMS ENGINEER - cv, word doc only

Description:
Coordinate product development activities between the supplier of the system and the affected work packages.

Ensure successful design, validation, certification and delivery of the system.

Ensure successful completion of each development phase deliverables (may author, review, approve).

Problem solve the technical issues in a cross functional environment.

Duties include:

Design and integration of the system;

Review of design and documentation of all the aspects related to your system;

Checking for quality of the Supplier's analyses;

Validation and verification of system requirements;

Validation and verification of system performance through design reviews, analyses, rig and aircraft testing;

Definition, preparation and execution of qualification and certification tests;

Working with supplier in the investigation and resolution of test findings;

Preparation or review of qualification or certification reports;

Working with suppliers to establish complete system requirements and system interfaces;

Liaison with stress, loads, reliability, maintainability and safety (RM&S), simulation, customer and operations support departments;

Identify issues and obstacles, follow-up and communicate progress;

Prepare reports or presentations.

Bachelor or Master's (preferred) degree in Mechanical or Aerospace Engineering with a relevant experience of a minimum of 5 to 8 years.

Must have a good knowledge of propulsion systems and their integration on the aircraft.

Have a background in design, integration, development and certification of Propulsion Systems.

Cognizant of the relevant Airworthiness Regulations and certification process.

Have knowledge of MS Office software (essential).

Familiar with Part 25 Regulations and certification requirements.

Flight testing/testing experience an asset.

Good oral and technical writing skills in English (required) and knowledge of French is an asset.

Motivated, self-starter, organized, autonomous and able to work under limited supervision.

Team player: able to work with suppliers and customers.

Must be dynamic, use initiative, have a strong sense of responsibility and good judgment.

Flexibility is expected: (may be on-call, shift-work, rotational work, weekends, odd hours, etc).
 
Job Number: 2303
Job Location: Toronto, Canada
Rate: 58.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/30/2017
Last Updated: 01/26/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aero Thermal Fluids Analyst

Description:
Location: Jupiter, FL
Rate: $60.00 - $62.00/HR
Duration: 1 year contract
Shift: 1st Shift

**Candidates must either have an Active Secret Clearance or have had a Secret clearance in the last two years **
** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

Duties:
**Candidates must either have an Active Secret Clearance or have had a Secret clearance in the last two years **
-Conduct aerothermodynamic and heat transfer design and analysis of hypersonic air-breathing propulsion systems (ramjets/scramjets) and/or liquid rocket engines.
-Develop thermal models to design and analyze cooled and un-cooled engine components.
-Develop fluid flow models using Computational Fluid Dynamics codes or other analytical tools.
-Design, test and analyze data from component rigs to supplement or validate analytical models.
-Support planning and testing of engines (ground and flight) and analyze the test data.
-Document work performed in the form of reports and briefings.

Skills:
**Candidates must either have an Active Secret Clearance or have had a Secret clearance in the last two years **
-Knowledge of aerothermodynamics and heat transfer as applied to scramjet and/or liquid rocket engine systems, including turbomachinery and combustion devices.
-High proficiency levels in ANSYS Mechanical or Workbench heat transfer analysis tools, ANSYS CFX, FLUENT or comparable CFD codes.

Education:
**Candidates must either have an Active Secret Clearance or have had a Secret clearance in the last two years **
- B.S. degree or higher in Mechanical or Aerospace engineering, or equivalent engineering
 
Job Number: 7854
Job Location: Savannah, GA
Rate: $60.00 - $62.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 10/23/2017
Last Updated: 02/19/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aero Thermal Fluids Analyst with active secret / ANSYS heat transfer CFD aerothermodynamics liquid rocket engine systems turbomachinery combustion devices URGENT FL

Description:
160246/7337135

Job Title: Aero Thermal Fluids Analyst
62.86/hr


Number of Positions: 3
Remaining Positions: 3
Duties: ** Candidates must either have a current Secret clearance or have had a Secret clearance in the last two years **

** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

** Selected candidates for Jupiter, FL roles must be onboarded through one of these approved background check providers: EIS, First Advantage or Sterling / Talentwise. See attachment for specific background check onboarding requirements **


-Conduct aerothermodynamic and heat transfer design and analysis of hypersonic air-breathing propulsion systems (ramjets/scramjets) and/or liquid rocket engines.
-Develop thermal models to design and analyze cooled and un-cooled engine components.
-Develop fluid flow models using Computational Fluid Dynamics codes or other analytical tools.
-Design, test and analyze data from component rigs to supplement or validate analytical models.
-Support planning and testing of engines (ground and flight) and analyze the test data.
-Document work performed in the form of reports and briefings.
Skills: -Knowledge of aerothermodynamics and heat transfer as applied to scramjet and/or liquid rocket engine systems, including turbomachinery and combustion devices.
-High proficiency levels in ANSYS Mechanical or Workbench heat transfer analysis tools, ANSYS CFX, FLUENT or comparable CFD codes.

Education: B.S. degree or higher in Mechanical or Aerospace engineering, or equivalent engineering


Skills: Required
• ANSYS
• ACTIVE SECRET CLEARANCE

State/Province: Florida
City/Town: Jupiter
Address: 17900 Beeline Hwy


Start Date: 09/18/2017 Hours Per Week: 40.00
Est. End Date: 09/18/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7337135
Job Location: Jupiter, FL
Rate: 62.86/hr max
Duration: 12 month contract
Input Date: 02/22/2018
Last Updated: 02/27/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer / no clearance / Flight Control and Vehicle Management System skills a requirement CA

Description:
Requirement #AERO-REQ-0710
Work Location Palmdale, CA (1011 Lockheed Way)
Work Week 9/80

Needed Date 11/28/2017
End Date 11/09/2018
Number of Resources 1
No Clearance

Flight Control and Vehicle Management System skills a requirement

Title: Aeronautical Engineer

Description

Candidate will contribute to aircraft FC&VMS (Flight Controls & Vehicle Management System) design, configuration development, feasibility and risk analyses, and technology maturation plans, define, develop, analyze and coordinate FC&VMS requirements with other flight sciences disciplines including ground and flight test, reliability & maintainability, system safety, and other personnel. Develop models and simulations as needed for design and analysis. Perform trade studies and define preliminary requirements for VMS architecture components. Design mechanical and electrical/electronic interfaces to support system integration and test. Define high level software requirements and flow down requirements to procurement specifications. Tasks may also include management of selected vendors, including verification of requirements. The candidate will support system/software verification and validation effort and customer reviews during all phases of system development. The candidate will develop and support integration and system check out (SCO) procedures on flight test article and support pre-flight and post-flight analysis and reviews

Skill/Experience/Education

Mandatory:

Hardware and software integration experience Familiarity with Flight Controls and Vehicle Management Systems Demonstrated ability coordinating with systems engineering, hardware designers and subsystems
Desired:

B.S. Degree or above in an Engineering Discipline
Several years of hardware & laboratory experience MATLAB, Simulink experience


Interview Required Yes
OT Allowed Yes (OT Limitation: No)
Travel No
Non-Exempt
Rate Type Per Hour

Rates
0-4 Yrs Pay Rate: 65.00 USD
5-8 Yrs Pay Rate: 70.00 USD
9+ Yrs Pay Rate: 75.00 USD
 
Job Number: JE-0710
Job Location: Palmdale, CA
Rate: 65-75/hr DOE
Duration: 12 month contract
Input Date: 01/16/2018
Last Updated: 02/06/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer with active secret / design of mechanical and electronic interfaces / integration test / serial buses C/C++ programming CA

Description:
160459
Requirement #AERO-REQ-0666
Work Location Palmdale, CA
Work Week 9/80
Priority High
Needed Date 11/27/2017
End Date 11/09/2018
Number of Resources 1
Security Clearance Secret

Title: Aeronautical Engineer

Description

Candidate will be responsible for designing and building a system integration laboratory (SIL). This effort includes design of mechanical and electronic interfaces to support software development, integration and test efforts. Candidate will have hands-on hardware experience and software skills. Candidate will be able to troubleshoot hardware/software integration issues and perform integration and test. Define, develop, analyze and coordinate SIL requirements, allocate requirements and define interfaces between subsystems. Effort also includes flow down of requirements to procurement specifications, and management of vendor selection and vendor performance, including verification of requirements. The candidate will support system/software verification and validation effort and customer reviews during all phases of system development. The candidate will develop and support integration and system check out (SCO) procedures on flight test article and support pre-flight and post-flight analysis and reviews. Good oral and written communication skills are required as is the ability to flex and adapt in a fast-paced team environment. Complex organization and documentation skills are required.

Skill/Experience/Education

Mandatory:

Final Secret Clearance.

Hardware and software integration experience.
Demonstrated ability to design and troubleshoot mechanical and electronic interfaces to support software development and test.
C or C++ programming experience.
Experience with serial buses.

Desired:

B.S. Degree or above in an Engineering Discipline Several years of laboratory experience


Interview Required Yes
OT Allowed Yes (OT Limitation: No)
Travel No
Non-Exempt

Rates
0-4 Yrs Pay Rate: 65.00 USD
5-8 Yrs Pay Rate: 70.00 USD
9+ Yrs Pay Rate: 75.00 USD
 
Job Number: JE-0666
Job Location: Palmdale, CA
Rate: 65-75/hr DOE
Duration: 12 month contract
Input Date: 12/04/2017
Last Updated: 03/15/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Mechanical Design Engineers - Greensboro, NC

Description:
STS AeroStaff Services now offers Aerospace Mechanical Design Engineer jobs in Greensboro, North Carolina.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Summary:

The Manufacturing Engineer position provides technical support for the Design Engineering Group working in areas such as manufacturing, design, development, and testing.

Job Duties:

• Supports work specific to detail parts manufacturing and assembly operations within a manufacturing environment
• Develops documentation and procedures to ensure compliance specific to customer, and regulatory production requirements and specifications
• Interprets engineering drawings to determine requirements meet objectives
• Acts as liaison between design engineering, tooling department, machine shop, metal bond shop, composites and plastics shop, tube shop, manufacturing graphics department, quality and the production floor
• Analyzes statistical data including process capability studies, tests capability studies, and through-put rates
• Provides technical support and assistance with the development and improvement of methods, quality product design, cost, and technical issues as required
• Plans and documents various installation processes, tooling, equipment and quality control methods to optimize the manufacturing operation
• Ensures completed tasks have been performed and inspected in accordance with clien standards
• Identifies and corrects all production and manufacturing issues
• Prepares assembly data sheet and updates planning data sheets
• Assist with BOM identification and control
• Prepares and monitors tool orders and first article inspection sheets
• Details and assembles methods planning and tool manufacturing planning

Education, Experience, Certification and/or Licensure:

• Bachelors' degree in Manufacturing Engineer or other related field strongly preferred
• In lieu of education one year of direct aircraft experience potentially may be substituted for each year of college
• 3+ years’ of experience in Manufacturing Engineering
• 3+ years’ experience in aerospace industry in aerospace manufacturing

Knowledge, Skills and Abilities:

• Working knowledge of or exposure to Lean Manufacturing tools
• Ability to read and interpret engineering drawings and/or specifications requirements
• Excellent oral and written communication skills
• Excellent problem solving skills
• Ability to work in a diverse environment
• Excellent communication and presentation skills.
• Some experience utilizing tools such as SAP, CAD CAM, CATIA, Microsoft Office Suites (Word, Excel, PowerPoint, Project, and Lotus Notes)
• Ability to multitask
• Strong organizational skills

Physical Requirements:

• Incumbents may be routinely exposed to equipment operational noise heat-cold-dust, and/or aircraft equipment, parts, or fuel odors
• Incumbents may be required to stand, sit, squat, walk, bend, move, reach, or stretch for prolonged time periods with no restrictions, as required by job duties
• Work in a safe and professional manner while adhering to all regulatory requirements (FAA, OSHA, DOT, EPA, State, and Federal regulations, etc.)
• Read, hear, speak, and see with no restrictions, as required by job duties
• Comprehend and adhere to management directions and/or safety instructions with no restrictions
• Effectively communicate in Business English language
• Pull, push, carry, lift, or move items up to 10 lbs. throughout the work shift without assistance, as required by job duties
• Pull, push, carry, lift or move materials/people/items/equipment weighing up to 50lbs or more during the work shift, with the use of Company provided “reach assistance technology” or “movement assist technology” (fork-lifts, pallet jacks, pulleys, dolly’s, robotics reach equipment, people movers etc.), as required by job duties

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 40721
Job Location: Greensboro, NC
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 11/27/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Design Engineers - Mechanical Systems

Description:
Aircraft Mechanical Systems Design Engineers Needed.
Design of aircraft mechanical systems including hydraulic, fuel, ECS, and/or flight control systems.
Create 3D/2D definition.
CATIA V5.
1. Bachelor’s degree in engineering or equivalent years of work experience in lieu of formal education.
2. Mechanical Systems Design Knowledge, Skills and Abilities.
3. Ability work independently as well as in a mutli-functional team environment.
4. Working knowledge of Microsoft Office (Word, Excel, and PowerPoint).
5. Extensive working knowledge and experience with CATIA v.5.
6. Visual Basic, Matlab, Simulink, FiberSim, Determinent Assembly techniques, composite curing, and Geometric Dimensioning and Tolerance experience preferred.
7. Knowledge of principles of structural design mechanics including predicting strength and other possible structural instabilities.
8.Strong mechanical design skills for all structural components of aircraft.

The Structures Company, LLC is an AA/EOE
 
Job Location: NC
Rate: $50-$60/hr
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 01/02/2018
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Airframe Design Engineer / NX and FiberSIM CA

Description:
Job ID# 14657

Title Airframe Design Engineer
Job Summary General Atomics Aeronautical Systems, Inc. (GA-ASI), an affiliate of General Atomics, is a world leader in proven, reliable remotely piloted aircraft and tactical reconnaissance radars, as well as advanced high-resolution surveillance systems. We recognize and appreciate the value and contributions of individuals with diverse backgrounds and experiences and welcome all qualified individuals to apply.

We have an exciting opportunity for an Airframe Engineer within our Airframe Design Group at General Atomics Aeronautical Systems. This is an airframe design and analysis position in the Advanced Aircraft Engineering Organization located in San Diego, CA. Under the general direction of Engineering management or IPT lead, serve as a member of the airframe design team providing conceptual and detail designs of primary and secondary structural aircraft components. General responsibilities include leading and coordinating the design activities of a team of 1-5 engineers within an assigned project. Establish and communicate clear task expectations. Primary product lines for design activities will be unmanned aerial vehicles, modification of existing aircraft structures and special projects to support sensor integrations.

DUTIES AND RESPONSIBILITIES:•Able to self-prioritize tasks. Works under general direction
•Produce airframe structural configuration layouts and detail designs including preliminary sizing/stress analysis, joint layouts, interface boundary definitions of parts and assemblies employing metallic and composite materials.
•Create and maintain CAD solid models and drawings of installations, assembly and detail components that meet all requirements such as structural integrity, interface boundaries, weight and cost targets as directed by the project engineer.
•Periodically review and check the product structure and BOM’s of the team to insure fit, form, function of the structural components is maintained.
•Conduct periodic design reviews as required to ensure designs meet the requirements.
•Coordinate and collaborate with members of stress, manufacturing, procurement, quality control and other departments as required to mature the design from conception to production.  
•Create and maintain documentation that tracks team weekly progress status as it related to the Program budget and deadlines.
•Prepare PowerPoint presentations to support Program PDRs and CDRs.
Provide technical support and mentorship to those less experience members of the team.

Qualifications Essential Qualifications Typically requires a bachelors degree, masters degree or PhD in engineering or a related technical discipline from an accredited institution and progressive engineering experience as follows; six or more years of experience with a bachelors degree, four or more years of experience with a masters degree, or two or more years with a PhD. May substitute equivalent engineering experience in lieu of education. Must have a thorough understanding of engineering concepts, principles, codes, and theory; experience demonstrating a broad application of those concepts; and, expanding knowledge of principles, concepts, theory, and practices in related technical specialties. Must possess the ability to develop and communicate new concepts; apply them accurately throughout an evolving environment; organize, schedule, and coordinate work phases; and, determine the appropriate approach at the task level or, with assistance, at the project level to provide solutions to a range of complex problems. Must have strong communication, computer, documentation, presentation, and interpersonal skills, ability to work independently and as part of a team; able to perform complex tasks in one or more engineering areas; capable of representing the organization as a prime technical contact and, lead a team of moderately experienced professional employees on single component projects. Able to work extended hours as required. A Professional Engineering License and original work published in professional engineering journals are desirable.
Additional Qualifications - Typically requires a bachelors degree, masters degree or PhD in engineering or a related technical discipline from an accredited institution and progressive engineering experience as follows; six or more years of experience with a bachelors degree, four or more years of experience with a masters degree, or two or more years with a PhD. May substitute equivalent engineering experience in lieu of education. BS in Mechanical Engineering, Aerospace Engineering or similar are desired. Advanced degrees highly desirable.
- Experience with the composite part detail process, including composites stacking sequence, lamination theory, honeycomb core, bonded assemblies, manufacturing assembly and fabrication processes, post-cure machining operations desired.
- Familiar with industry standards for the manufacture, repair and assembly of composite components for aerospace.
- Experience with NX and FiberSIM

City San Diego
State California
Travel Percentage Required 0% - 25%
Clearance Required? No
Work Schedule Rule 9/80
Temp Assignment Duration (# of Days) 180
 
Job Number: JE-14657
Job Location: San Diego, CA
Rate: 60/hr max
Duration: 6 month contract
Input Date: 01/10/2018
Last Updated: 01/10/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aviation Warranty Coordinators - Atlanta, GA

Description:
STS AeroStaff Services now offers Aviation Warranty Coordinator jobs in Atlanta, Georgia.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Duties:

• The TechOps Supply Chain Warranty team is seeking an experienced professional responsible for execution of aircraft, component, cabin, and engine warranty claim processes
• The successful candidate will collect information to substantiate warranty claims, and process claims to completion
• The role will also support developing improvements to the efficiency, productivity, and performance of the role
• This role will collaborate with both SCM and cross-divisional Tech Ops stakeholders
• The individual should have a minimum of 3 years’ of experience in an operations environment with a large and diverse complement of employees, and ability to work with minimal supervision and complete ownership of projects
• Practice safety conscious behaviors in all operational processes and procedures

Qualifications:

• Bachelor’s degree in Operations, Management, or Aerospace, Mechanical, Industrial Engineering or related discipline is strongly preferred; equivalent A&P License with 3 years’ airline work experience is acceptable
• Understanding of Supply Chain processes and metrics, ability to influence without authority, and work in a matrix environment is a highly preferred
• Advanced computer, analytical, organizational, written and verbal communication skills is highly preferred
• Experience in database mining in the Hyperion or equivalent environment to identify aircraft parts reliability trends is a strong plus
• Candidates with experience in data science or advanced analytics will be strongly considered
• Must be a strong team player, detail oriented, and exhibit a healthy curiosity or interest in aviation
• Candidate should demonstrate the ability to communicate effectively and structure/deliver presentations targeted toward varied audiences including company leadership
• Must be a self-starter able to work independently with limited supervision and effectively prioritize and deliver on tasks
• Only candidates with strong Microsoft Word, PowerPoint, and Excel skills will be considered for this role
• Must be performing satisfactorily in current role

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 40846
Job Location: Atlanta, GA
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 12/06/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer III / Instrumentation / CREO / MODELCHECK / Harness cable electro-mechanical packaging CA

Description:
7356312
Job Title: Avionics Engineer III / Instrumentation

Number of Positions: 1

Remaining Positions: 1

Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **




** Candidates should have experience with Creo Parametric and Creo Cabling. Experience with Creo Schematics; Windchill; and Modelcheck preferred **



-Support Electro-Mechanical Packaging of complex electrical/electronic assemblies.

-Extensive knowledge of electronic packaging design for harsh environments, with Aerospace and/or military experience.

-Experience is design of cables and harnesses for applications for Aerospace products.

-Proficiency in use of Creo PDM/Link and Windchill.

-Additional proficiency with GD&T and tolerance analysis.



Skills:
Prior experience and detailed knowledge of Windchill PDMLink 10.1 or greater
Previous experience with MODELCHECK preferred
Proficiency with Creo Parametric 2.0 (or greater) with extensive knowledge of:
Large Assembly Management, Simplified Representations, Combination States
Top Down Design with Skeletons including Publish Geometry, Copy Geometry, and Shrinkwraps
Mechanism Design
Advanced part modeling techniques including the use of relations, analysis features, and flexible components
Experience with Creo Cabling including
Utilizing logical reference data (automated routing)
Harness flattening using Creo Harness-MFG extension
Working knowledge of Creo Schematics 2.0 desired including:
Block Diagram to Wiring Diagram Schematic Development (aka “BID to WID”)
Diagram creation utilizing a Central Catalog

Education:
BSME with 10 years of experience or 15 + years of equivalent experience

Skills:
Required

AVIONICS INSTRUMENTATION CREO WINDCHILL GEOMETRIC DIMENSIONING GEOMETRIC TOLERANCING

State/Province: California
City/Town: Canoga Park

Start Date: 11/06/2017 Hours Per Week: 40.00
Est. End Date: 05/06/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7356312
Job Location: Canoga Park, CA
Rate: 49/hr max
Duration: 6 month contract
Input Date: 11/01/2017
Last Updated: 12/19/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer III/Instrumentation

Description:
Avionics Engineer III / Instrumentation
Canoga Park, CA
Rate: $45-$49


Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **




** Candidates should have experience with Creo Parametric and Creo Cabling. Experience with Creo Schematics; Windchill; and Modelcheck preferred **



-Support Electro-Mechanical Packaging of complex electrical/electronic assemblies.

-Extensive knowledge of electronic packaging design for harsh environments, with Aerospace and/or military experience.

-Experience is design of cables and harnesses for applications for Aerospace products.

-Proficiency in use of Creo PDM/Link and Windchill.

-Additional proficiency with GD&T and tolerance analysis.



Skills: •Prior experience and detailed knowledge of Windchill PDMLink 10.1 or greater ◦Previous experience with MODELCHECK preferred

•Proficiency with Creo Parametric 2.0 (or greater) with extensive knowledge of: ◦Large Assembly Management, Simplified Representations, Combination States
◦Top Down Design with Skeletons including Publish Geometry, Copy Geometry, and Shrinkwraps
◦Mechanism Design
◦Advanced part modeling techniques including the use of relations, analysis features, and flexible components

•Experience with Creo Cabling including ◦Utilizing logical reference data (automated routing)
◦Harness flattening using Creo Harness-MFG extension

•Working knowledge of Creo Schematics 2.0 desired including: ◦Block Diagram to Wiring Diagram Schematic Development (aka “BID to WID”)
◦Diagram creation utilizing a Central Catalog


Education: •BSME with 10 years of experience or 15 + years of equivalent experience
 
Job Number: 8082
Job Location: Canoga Park, CA
Rate: $45-$49
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 10/13/2017
Last Updated: 12/18/2017
Firm Name: INCONEN CORPORATION
Attention: Cathy O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics UT-ENG-3104MST

Description:
DESCRIPTION
Supports, performs and manages development, design, integration and test function and project teams of Avionics/flight control systems, including electronics, SW, hydraulics, etc. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

POSITION ROLES & RESPONSIBILITIES
- Create Catia V5 hydraulic and mechanical flight control layouts, installations, assemblies, details.
- Create, release, and revise Catia V5 engineering detail, assembly, installation drawings and bill of materials using Enovia Matrix, LCA.

- Work closely with various design groups to coordinate designs and establish aircraft interfaces.
- Work closely with aircraft final assembly shop personnel.
- Work closely with various suppliers.

EXPERIENCE REQUIRED
- Minimum of a BS in Engineering Design required
- High level communications skills both written and oral.
- In-depth knowledge of Catia V5, Enovia Matrix and LCA functionality.
- Experience with Catia V5 Tubing function.
 
Job Number: 17-796-1819
Job Location: Northeast
Rate: OPEN
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 01/29/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

Bleed Air Designer (7 needed)

Description:
The Designer for BAS/VCS is responsible for providing design expertise in support of the Bleed Air System (BAS) and Vapor Cycle System (VCS) through all phases of project schedule including preliminary design, detailed design, development, certification, sustaining, production and product support.

Duties and Responsibilities:
1. Prepare 3D layout models of the BAS and VCS.
2. Prepare 3D installation and detail models of the BAS and VCS.
3. Prepare 2D installation, assembly and detail drawings of the BAS and VCS.

Education, Work Experience, Certification and/or Licensure:
1. Bachelors of Science in Aerospace or Mechanical Engineering from an accredited four year college or university program
2. Minimum 5+ years of directly related design experience in the development and certification of aircraft BAS and VCS.

Knowledge, Skills and Abilities:
1. Experience using CATIA V5 to prepare 3D parametric models and 2D drawings. Minimum of 10,000 hours.
2. Knowledge of one Product Life Cycle Management Tool (e.g. Teamcenter, Enovia,..)
3. Knowledge of 14CFR23 or 25 regulations and advisory circulars related to BAS and VCS regulations required and knowledge of Aircraft BAS and VCS.
 
Job Number: 28-024
Job Location: Greensboro, NC
Rate: Up to $60/hr, DOE
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 05/25/2018
Last Updated: 07/16/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Email: matt@precisionpersonnel.com
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Cabin Safety Engineer V&V

Description:
Velocity’s client, an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM’s, is seeking multiple Cabin Safety Engineers. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.
Seeking contract engineers to join the team in Seattle with at least five years’ experience with cabin safety engineering, to include:
• Experience and knowledge of FDMS & Water Waste Interior Systems (OEM level preferred)
• Experience with requirements writing at aircraft/systems level
• Experience validating requirements (completeness and correctness) and developing verification matrix (plan and results)
• Familiar with requirements definition, traceability, validation and verification process.
• ARP4754A knowledge and experience
• Proficient at DOORS or similar requirement management tool.
Essential functions:
• System requirements verification and validation.
• Flight test and ground test specifications.
• Support flight test and ground test activities.
• Analyze test data and evaluate system operation.
• Prepare test reports.
Desired Qualifications:
• Experience with FAA Part 25 or Part 23 certification, flight and ground test activities.
• Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
• A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
• Ability to represent the client professionally and positively during client interactions and meetings.
• Bachelor degree in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
 
Job Location: Moses Lake, WA
Start Date: ASAP
Input Date: 12/28/2017
Last Updated: 01/23/2018
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Central Office Installer

Description:
Job Description:
• Install telecommunications equipment at customer sites.
• Equipment to install is Juniper, Cisco, Nokia
• Read, interpret, and implement job specifications.
• Run, secure, and terminate Fiber, DS3, DS1, and Power cable.
• Assemble frames, superstructure and miscellaneous hardware.
• Perform required testing of installed wiring using specifications and drawings.
• Label and stencil equipment and cabling.
• Install and connect basic AC wiring.
• Run and terminate DC power cabling.
• Experience with Stitching, Wire Lacing or Wire Wrapping
• Maintain satisfactory quality performance levels.
• Practice safe work habits.
• Timely and accurate completion of necessary operations paperwork (e.g. expense reports, time sheets, job documentation, etc.)
• Provide daily job status reports as requested.
• May be required to provide on the job training to other installation technicians.
• May be required to assume responsibility for successful completion of basic installation projects.
• Other duties as assigned.

Required Skills:
• Good manual dexterity.
• Ability to operate hand and power tools.
• Ability to read simple mechanical drawings.
• Ability to work independently and with others.
• Ability to lift up to a maximum of 25 pounds.
• Ability to climb a ladder.
• Professional appearance and manner.
• Good customer service and administrative skills.
• Ability to identify different colored wires.
• Valid driver’s license and reliable personal vehicle for travel to job sites.
• Ability to travel extensively (including overnight) both locally and nationwide.
• Own basic tools with the ability to use them as appropriate.
• Cell phone with data and unlimited talk plan.
• GPS for travel.
• Computer operation knowledge (Word, Excel, and test software).
• Ability to work day and/or night shift hours.
 
Job Number: 40638
Per Diem: Yes
Overtime: Yes
Input Date: 11/30/2017
Firm Name: PANTHER GROUP
Attention: John Sabbagh
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Chemical Engineer

Description:
Chemical Engineer
Location: Tulsa, OK
Duration: 12+ months
Rate: Open, DOE
Chemical Engineer Summary Statement:
Applies extensive knowledge of principles, theories and concepts related to Chemical Engineering.
Chemical Engineer Essential Functions and Key Responsibilities:
Develops solutions to a variety of problems of moderate scope and complexity.
Solves unusual problems that require moderate ingenuity and innovation related to chemical engineering, chemical formulations and manufacturing processes. Work is accomplished under general management direction. Applies extensive knowledge of chemistry and chemical engineering to design and develop transparency related aircraft products for military, executive, general aviation, or special purpose applications on operational aircraft. Researches and develops new and improved chemical manufacturing processes. Designs chemical plant equipment and devises processes for manufacturing. Determines most effective arrangement of operations such as mixing, conditioning, application, and testing of related polymer products. Develops, implements, and maintains chemical processes;calculates and organizes all data for complex process flow sheets including instrumentation and control considerations; models processes and units operations. Confers with management to ensure proper sequence of operation and prepares specifications and operating instructions for processing equipment. Services, troubleshoots, and solves engineering problems with processes or equipment already in operation. Ensures processes and procedures are in compliance with regulations.
Conducts tests and measurements throughout stages of production to determine control over such variables as temperature, density, pressure and viscosity. May function as Project Manager on large projects or significant portions of very large projects. Provides technical leadership and oversight to the assigned engineering staff. May represent the Company to current or prospective customers or vendors on technical matters related to the job assignment or technical specialty.
Chemical Engineer Ancillary Job Functions and Responsibilities:
Perform other duties as required. These duties may include assignments in job classifications other than the primary assignment.
Chemical Engineer Job Qualifications:
Formal Education, Training, Professional Certification and
Chemical Engineer Work Experience:
Experience may be substituted for the formal education and training requirements in this section at the discretion of management. Technical Bachelor level degree in Engineering or the sciences or equivalent and six(6) years related experience and /or training; or equivalent combination of education and experience.
Level of Supervision Required:
Works under general direction. Receives guidance as to results expected and to resolve complex problems. Exercises latitude in determining activities and approaches within moderate to wide parameters. Standard Job Requirements:
•Must be able to arrive at work on time, work on-site, and attend regularly.
•Must be able to read and write technically in the English language, perform appropriate mathematical calculations and learn to interpret and comprehend company policies, procedures, safety instructions, and other like documents used in an aerospace manufacturing environment.
•Competent in the use of standard software applications such as Microsoft Word and Excel and operate standard office equipment.
•Make telephone and direct personal contact with internal and external personnel and make formal presentations
Chemical Engineer
.•May perform work of lesser skilled employees.
Special Job Requirements:
Experience and working knowledge of the following:
•Polymerization and casting of liquid methyl methacrylatemonomer
•Catalysts and cross-linking agents
•Filtration of liquid monomers
•Mechanical properties testing of polymers
•Adhesion promoters and surface primers
•Polymer coating so Polysiloxane and other protective coating so Electrically-conductive coating so Optical coatings for projection screens. Special Training:
•Safety training applicable to the job and the general work area.
Physical Requirements:
While performing the duties of this job, the Stakeholder is regularly required to sit; use hands to finger, handle, or feel; and talk and hear. The Stakeholder frequently is required to move from one place to another and reach with hands and arms. The Stakeholder must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, and ability to adjust focus. Travel between facilities. Must be able to work in excess of eight (8) hours per day and five (5) days per week, if required. Must be able to ascend and descend stairs. Work Environment :Must be able to tolerate exposure to dust, fumes, noise, temperature and other elements in the shop area, if required. The noise level in the work environment is usually moderate.
Mental Requirements:
Able to work as a team member, highly organized, work well under stress and handle multiple priorities. Must possess interpersonal and communication skills to interact with other people inside and outside the company.
The Structures Company, LLC is an AA/EOE.
 
Job Location: Tulsa, OK
Rate: "open"
Per Diem: yes
Overtime: "possible"
Duration: 12+ month
Start Date: asap
Input Date: 12/04/2017
Firm Name: STRUCTURES COMPANY LLC
Attention: Mark Sharp
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Circuit Card Assembly Specialist 2017-4708

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Circuit Card Assembly Specialist
(U.S. Citizenship Required*)
Must be able to work any shift
Huntsville, AL
2017-4708


Responsibilities:
• Performs all Circuit Card production assembly operations on electronic/electrical assemblies and subassemblies as an individual or as a member of a cross-functional, high performance work team.
• Performs simple rework and modification to circuit card parts and assemblies per requirements.
• Provides maintenance on machines and tooling and machine set up tasks to prepare machines for production activity following the machine inspection checklists.
• Documents results in accordance with applicable procedures.
• Collects and inputs data for statistical process control analysis.
• Perform CCA work using detail work instructions & other released planning documentation and a variety of other supporting technical documentation as required including but not limited to: CCA technical drawings, 2D & 3D models, schematics, circuit/wiring diagrams, process and equipment specifications, photographs, illustrations, and sketches.
• Perform all elements of CCA assembly, integration from detail fabrication to buildup of circuit card assemblies.
• Perform assigned work using any electrical and CCA related electronic test instrument, test equipment, measurement tool, required to trouble shoot at the CCA component level.
• Document CCA non-conformances down to component level. Perform, as required, approved CCA rework, modification, repairs and incorporation of changes per CCA technical documentation and formal direction to electrical, electronic and mechanical systems.
• Assist in defining, implementing, completing, and monitoring the execution of the work scope.
• Make recommendations for refinement to CCA equipment and integration processes by conducting studies and evaluations that result in product and process improvements.
• Analyze CCA product, processes, test data, and rejection history to identify root cause for problems and assist with developing corrective action.

Qualification:
• Basic Manufacturing Skills
• Basic Electricity
• Circuit Card Assembly (CCA) experience
• J-standard soldering certified
• Space addendum certified

*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
Work related skills equivalent to 3 years of circuit card related technical experience or a 2-year degree in electronics, mechanical or other technical discipline (or a minimum successful completion of all electronic courses contained with a 2-year electronics technical degree curriculum).

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!



TO APPLY, PLEASE VISIT OUR WEBSITE:
 
Job Number: 2017-4708
Job Location: Huntsville, AL
Duration: 6 Months
Input Date: 12/04/2017
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: https://careers-moseleytechnical.icims.com/jobs/4708/circuit-card-assembly-specialist/job?mode=view
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Component Product Engineer (Project Engineer) II/III

Description:
Location: Canoga Park, CA
Rate: $35.00 - $48.00/HR
Duration: 6 month contract


** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


Duties:
**This is NOT a Designer role. Please make sure that all candidates with a Designer background or Designer expectations are aware of this. This is a Project Engineer role **
**Candidates should have 2 to 8 years of related work experience. No recent college graduates please**
**Position is for a Component Product Engineer for the development, fabrication and test of rocket engine system interconnect hardware**


Skills:
- 25%: Development and fabrication support of rocket engine components using engineering and scientific principles.
- 25%: Translates engineering and scientific concepts from preliminary ideas through product life cycle.
- 20%: Interfaces with other members of project or program teams, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
- 10%: Develops trade studies, design concepts, systems integration and component-level test plans.
- 10%: Supplier integration with external vendors
- 10%: Analyzes and verifies product design and performance for adequacy and reliability. Supports investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards or safety initiative activities.


Education:
- A Bachelor's degree in Mechanical or Aerospace Engineering.
- Candidates should have 2 to 8 years of related work experience. No recent college graduates please.
 
Job Number: 7819
Job Location: Canoga Park, CA
Rate: $35.00 - $48.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Input Date: 04/03/2018
Last Updated: 05/07/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Component Product Engineer (Project Engineer) II/III / local preferred URGENT CA

Description:
160209/7333281

8 open positions

48/hr max

Manager is currently interviewing.

Job Title: Component Product Engineer (Project Engineer) II/III



Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **



** This is NOT a Designer role. Please make sure that all candidates with a Designer background or Designer expectations are aware of this. This is a Project Engineer role **



* Candidates should have 2 to 8 years of related work experience. No recent college graduates please *



Position is for a Component Product Engineer for the development, fabrication and test of rocket engine system interconnect hardware.

Skills:
25%: Development and fabrication support of rocket engine components using engineering and scientific principles.
25%: Translates engineering and scientific concepts from preliminary ideas through product life cycle.
20%: Interfaces with other members of project or program teams, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
10%: Develops trade studies, design concepts, systems integration and component-level test plans.
10%: Supplier integration with external vendors
10%: Analyzes and verifies product design and performance for adequacy and reliability. Supports investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards or safety initiative activities.

Education:
A Bachelor's degree in Mechanical or Aerospace Engineering.

Skills:
Required

PROJECT ENGINEER COMPONENT ENGINEERING

State/Province: California
City/Town: Canoga Park

Start Date: 09/11/2017 Hours Per Week: 40.00
Est. End Date: 03/11/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7333281
Job Location: Canoga Park, CA
Rate: 48/hr max
Duration: 6 month contract
Input Date: 04/03/2018
Last Updated: 05/18/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Contract - DER Electro-Mechanical Systems Eng Landing Gear Systems & Hydraulic Systems

Description:
UNIQUE SKILLS
Consultant DER or EAR with current FAA authorizations in Landing Gear and related Systems and Hydraulic Systems areas - Currently in good DER or EAR standing with the FAA - Currently up to date with all required FAA DER or EAR training, certification, etc. - Eligible to be recognized and approved by the Client ODA to perform DER and/or EAR functions, including but not limited to signing 8100- and related forms in the above noted areas, in support of Client ODA projects and released engineering deliverables across the G650, G550, and G450 platforms – Previous Client experience in the above noted areas and Client aircraft platforms, as well as with Client associated Engineering release processes and procedures, in a DER or EAR and Senior Engineer role is preferred - US Citizen only
 
Job Number: 17-786-116381
Job Location: Southeast
Rate: $135.00/per hour
Per Diem: Split
Overtime: Possible
Duration: LT
Start Date: AAP
Input Date: 02/28/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
DER Electro-Mechanical Systems Eng Landing Gear & Hydraulic Systems

Description:
DER Electro Mechanical Systems Eng Landing Gear Systems & Hydraulic Systems

Savannah, GA
Rate: $135/HR
Long Term contract

Unique Skills:

- Consultant DER or EAR with current FAA authorizations in Landing Gear and related Systems and Hydraulic Systems areas - Currently in good DER or EAR standing with the FAA - Currently up to date with all required FAA DER or EAR training, certification, etc. - Eligible to be recognized and approved by the Company ODA to perform DER and/or EAR functions, including but not limited to signing 8100- and related forms in the above noted areas, in support of Company ODA projects and released engineering deliverables across the G650, G550, and G450 platforms - Previous Company experience in the above noted areas and Company aircraft platforms, as well as with Gulfstream associated Engineering release processes and procedures, in a DER or EAR and Senior Engineer role is preferred - US Citizen only
 
Job Number: 7930
Job Location: Savannah, GA
Rate: $135
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 10/31/2017
Last Updated: 01/30/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Checker

Description:
1. Review 3D engineering data for conformance to requirements as directed.
2. Check parts for fit, form and function to the extent that information is available.
3. Must have experience in Product Lifecycle Management (PLM) processes and tools, checking CATIA v5 , SmarTeam, as well as other CAD datasets, in accordance to requirements as directed.

Checkers are responsible for determining the acceptability of data in the following areas:
1. Accuracy and completeness of engineering product definition data, including CAD and PDM data.
2. Proper application and compliance with all Engineering and customer drawing requirements.
3. Use and understanding of GD & T a must.
4. Dimensioning and tolerancing including familiarity with ASME Y14.5.
5. Application of best drafting and design practices and procedures.
6. Applies extensive and diversified knowledge of industry fabrication practices for aircraft parts.
7. Advise Design personnel regarding company drawing and design practices and procedures.
8. Maintain a current and up-to-date knowledge of developments in the structures/systems design disciplines drawing/data requirements, as well as all interrelated disciplines of design build teams.
9. Assist in the research and development of Product Data Management (PDM)/Computer Aided Design (CAD) applications and methodologies for Engineering and when necessary, other departments.
10. Actively works to improve daily processes and ensure that all Data Integrity work and CAD and PDM solutions meet customer requirements.
11. Knowledge of company parts list & PdocM, a plus.
12. Knowledge of CHS, EWIS, Electrical harness Design a plus but not required.

Essential Duties and Responsibilities
1. Checks designs of complex mechanical aircraft interior furnishing, structures, and/or systems.
2. Ensures designs meet customer criteria, quality standards and FAA requirements.
3. Adheres to budget and project schedules.
4. Provides design guidance and feedback to other engineering personnel.
5. Other duties as assigned.
6. Knowledge of industry design and documentation standards.
7. Experience with mechanical assemblies and manufacturing technique design.
8. Ability to work independently and cross-functionally.
9. Experience in communicating with employees/teams in productive and efficient manner. • Strong communication and problem-solving skills.
10. Knowledge of Excel, Share Point software, Microsoft Office a plus

Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 5 ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.
 
Job Number: 24-191
Job Location: Savannah, GA
Rate: $50.00 - $55.00
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 09/25/2017
Last Updated: 02/06/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Checker

Description:
All candidates must have a Bachelor’s degree to apply.

RESPONSIBILITIES
• Reviews Engineering design documents consisting of drawing, engineering order and parts list for consistency with company standards, design quality, requirements and its corrective interpretation.
• Also reviews 3D models used to produce 2D design are properly associated and provide repeatability and correct representation in the Digital Aircraft Model.
• Constant Interaction with Design teams to review/discuss issues and agree on acceptable solutions

TASKS
• Check Drawing, Engineering order and parts list for adherence to company standards.
• Check 3D information in CATIA and PLM System clearly describe and annotate issues found to designer and engineering design field
• Work with design team to solve issues identified
• Consult with design team and other checkers for interpretation provide inputs to management on major issues being identified and help develop alternatives for solutions

REQUIREMENTS
• 10 plus years of experience designing mechanical and/ or structural parts, assemblies or installations for aircraft
• 7 years of experience with CATIA and PLM Systems (preferably Teamcenter)
• 5 years of experience working with GD&T
• Very familiar with aircraft production and assembly methods
• BS Mechanical or Aerospace Engineering
• Experience with Composite materials a Plus
 
Job Number: 28-016
Job Location: Greensbo, NC
Rate: $48-$60 DOE
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 09/20/2017
Last Updated: 12/18/2017
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer

Description:
Design Engineer to support our engineering team delivering highly complex electro-mechanical, mechanical, and pneumatic components and systems for flight actuation applications to our Defense Sector customers.

Essential job functions:
• Perform conceptual design, analysis, assembly/detail drawing creation in NX, and test planning for complex control hardware used on military aircraft
• Validate conceptual problem solutions through trade studies and by applying sound engineering principles
• Perform engineering calculations related to sizing, performance, tolerance and assembly
• Participate in the evolution of conceptual design, technical project planning, detail design, and development testing throughout the program lifecycle
• Create reliable designs through a comprehensive experimental development test program
• Document designs, analyses, and test results with accurate and concise reports
• Team-oriented, with the desire to participate in and contribute to a high functioning team
• Self-starter with strong analytical skills and a desire for constant improvement

Required skills:
• 6+ years of design and development engineering experience
• Proficient in current versions of NX/UG computer-aided design software, 2 years experience minimum
• Good sense of three-dimensional spatial orientation and knowledge of mechanical hardware design
• Proficient in assembly/detail drawings, GD&T, and dimensional tolerance analysis

Education:
• Bachelor’s degree in Mechanical or Aerospace Engineering or related technical field
 
Job Number: 52852
Job Location: Salt Lake City, UT
Rate: Open
Per Diem: Yes
Duration: 6 months plus
Start Date: ASAP
Input Date: 12/06/2017
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Rich Nguyen
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer

Description:
secret clearance

TeamCenter Engineering experience C130 Familiarity JobScope /IT reports experience

•Mechanical design and associated program deliverables on subassemblies or small self-contained systems
•Design and release drawings to meet internal and external commitments
 
Job Number: 41159
Job Location: KY
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 9 mos+
Start Date: ASAP
Input Date: 11/28/2017
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer

Description:
Location: Independence, OH
Rate: $33.38/HR
Duration: 1 year contract
Shift: 1st Shift

**Must be a U.S. Citizen or Permanent Resident**

Job Description:
- Design Engineer will be responsible for coordinating with the customer and developing complete Landing Gear layouts in response to customer requirements and design methodologies.
- This will involve conducting and documenting trade studies, developing complete Landing Gear design layouts, and provide input/guidance to the customer for landing system procurement specification development and maturation during the joint development phase of the program. - Manages delivery of mid to high level complexity research, design, and development of mechanical applications to the planning, design, development, and testing of mechanical and/or electromechanical systems, instruments, controls, engines, and ground test / mechanical tests.
- Additionally responsible for the CAD support of design projects and execution of Engineering design changes.
- Also, will be responsible for preparing and delivering presentations to the customer as required.

Requirements:
- Bachelor's degree and 10+ years of experience and US person status is required.
- Knowledge of PDM (Smarteam, MatrixOne, Team Center) systems, Catia V5, & MS programs (Word, Excel, Project, Power Point).
 
Job Number: 8288
Job Location: Independence, OH
Rate: $33.38/HR
Per Diem: No
Overtime: Possible
Duration: 1 yr
Input Date: 11/16/2017
Last Updated: 12/12/2017
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer

Description:
Design Engineer

Independence, OH
1 Year Contract
$50.00-60.00/Hr

Summary: Reporting to the Design Lead, the successful candidate will be responsible for supporting detail design and drawing release in support of initial production. Model Based Definition (MBD) drawings shall be compatible with UTAS Landing Systems design methodologies, customer and industry/regulatory requirements and standard practices. The successful candidate will conduct trade studies, generate layouts, perform tolerance stack-ups, and detailed part design and formal drawing release.

Required Qualifications:
• BS in Mechanical or Aerospace Engineering with 8+ years of design experience with a background in mechanisms and hydraulics in aerospace field with work experience with electrical and hydraulic systems routings
• Minimum of 8 years of experience within the Aerospace industry; must include extensive experience in New Product Development of transport and / or military type aircraft components and assemblies . Knowledge of industry standard practices for systems routings. Understanding of requirements management and verification. Understanding of decomposition of system requirements and development of sub-system requirements. Understanding of qualification requirements electrical and hydraulic equipment. CATIA V5 - model based definition (FTA), kinematics, functional tolerance and annotation and drafting / interoperability. Working knowledge of Engineering PDM systems. In-depth knowledge of MS programs (Word, Excel, Project, PPT). Strong communication skills capable of engaging and working directly with suppliers. US citizen, permanent resident alien or able to review all export-controlled technical information. Experience with GD&T (ASME Y14.5) and familiar with ASME Y14.100 and Y14.41 Experience with Matrix One and SmarTeam PDM systems Working knowledge of materials and surface treatments Proficient with MS Word, Excel, and PPT
• Demonstrated ability to utilize Catia V5 with strong emphasis on functional tolerance and annotation module
• Strong interpersonal skills with demonstrated ability to maintain good working relationships with internal and external customers
• Successful candidates must meet all requirements under ITAR & CCGP
• Possess UTAS-LS Enterprise Values including Ethical Behavior, Customer Focused Improvement, Accountability & Teamwork and Openness & Trust
 
Job Number: 8266
Job Location: Indendence, OH
Rate: 50.00-60.00/Hr
Per Diem: No
Overtime: Possible
Duration: 1 Year
Start Date: ASAP
Input Date: 11/15/2017
Last Updated: 02/05/2018
Firm Name: INCONEN CORPORATION
Attention: Brad
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer - Level 3

Description:
Location: Canoga Park, CA
Rate: $40.00 - $45.00/HR
Duration: 6 month contract

** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

Duties:
** Candidates must have significant experience with Creo and GD&T (Geometric Dimensioning & Tolerancing). Windchill experience strongly preferred **

** 6 years minimum of related experience as technical Design Engineer in rocket propulsion hardware or equivalent, and 6 years minimum of related experience as technical Designer using ProE/Creo CAD systems **

** Knowledge in the design of high pressure cryogenic, ambient and high temperature rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware is preferred **

Design Engineer - Must be able to create or modify designs of liquid rocket propulsion hardware associated to high pressure and high temperature static structures, combustion systems and high pressure valve systems.

•Responsible for designing, developing and testing products including providing project time and cost estimate, product manufacturing and evaluation product for quality safety and cost.
•Applies research to the planning design, development and testing of rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware.
•Applies theories of heat and energy transfer to create practical solutions to technical problems
•Responsible for damage tolerance, durability, design modeling, coordination with analysis disciplines.
•Majority of work will be to develop and maintain component and assembly layouts, designs/CAD models, and drawings using Creo2 graphics system for liquid engine hardware.

Activities: conceptual design creation, design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, synthesis of higher level requirements to component level requirements. Conduct trade studies and develop schedules, test plans, component specifications and procedures.

Skills:
- Candidates must have significant experience with Creo & GD&T. Higher level certifications are preferred.
- Winchill experience strongly preferred.
- Mechanical Design and development Engineers research, develop, analyze, design, and support fabrication of components using engineering and scientific principles.
- Engineers are also required to analyze and verify product design and performance for adequacy and reliability.
- Support or lead investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards and/or safety initiative activities.
- Must be able to interface well with other members of project or program team, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
- Must be able to prepare and make presentations at both internal and customer design reviews.

Education:
- BS degree in an Engineering field or equivalent. MS degree is desired.
 
Job Number: 8029
Job Location: Canoga Park, CA
Rate: $40.00 - $45.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Input Date: 10/04/2017
Last Updated: 01/16/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer - Level 3 CREO CA

Description:
Job Title: Design Engineer - Level 3

Number of Positions: 5

Remaining Positions: 5

Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **



** Candidates must have significant experience with Creo and GD&T (Geometric Dimensioning & Tolerancing). Windchill experience strongly preferred **



** 6 years minimum of related experience as technical Design Engineer in rocket propulsion hardware or equivalent, and 6 years minimum of related experience as technical Designer using ProE/Creo CAD systems **



** Knowledge in the design of high pressure cryogenic, ambient and high temperature rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware is preferred **





Design Engineer - Must be able to create or modify designs of liquid rocket propulsion hardware associated to high pressure and high temperature static structures, combustion systems and high pressure valve systems.



Responsible for designing, developing and testing products including providing project time and cost estimate, product manufacturing and evaluation product for quality safety and cost.
Applies research to the planning design, development and testing of rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware.
Applies theories of heat and energy transfer to create practical solutions to technical problems
Responsible for damage tolerance, durability, design modeling, coordination with analysis disciplines.
Majority of work will be to develop and maintain component and assembly layouts, designs/CAD models, and drawings using Creo2 graphics system for liquid engine hardware.
Activities: conceptual design creation, design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, synthesis of higher level requirements to component level requirements. Conduct trade studies and develop schedules, test plans, component specifications and procedures.



Skills:
Candidates must have significant experience with Creo & GD&T. Higher level certifications are preferred.

Winchill experience strongly preferred.

Mechanical Design and development Engineers research, develop, analyze, design, and support fabrication of components using engineering and scientific principles.

Engineers are also required to analyze and verify product design and performance for adequacy and reliability.

Support or lead investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards and/or safety initiative activities.

Must be able to interface well with other members of project or program team, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.

Must be able to prepare and make presentations at both internal and customer design reviews.

Education:
BS degree in an Engineering field or equivalent. MS degree is desired.

Skills:
Required

AEROSPACE DESIGN CREO GEOMETRIC DIMENSIONING GEOMETRIC TOLERANCING WINDCHILL

State/Province: California
City/Town: Canoga Park

Start Date: 11/06/2017 Hours Per Week: 40.00
Est. End Date: 06/30/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7455592
Job Location: Canoga Park, CA
Rate: 45/hr max
Duration: 7 month contract
Input Date: 01/09/2018
Last Updated: 01/16/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer - Level 4

Description:
Location: Canoga Park, CA
Rate: $55.00 - $65.00/HR
Duration: 6+ month contract

** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

Duties:
**Candidates must have significant experience with Creo and GD&T (Geometric Dimensioning & Tolerencing). Windchill experience strongly preferred**

** 10 years minimum of related experience as technical Design Engineer in rocket propulsion hardware or equivalent, and 10 years minimum of related experience as technical Designer using ProE/Creo CAD systems **

** Knowledge in the design of high pressure cryogenic, ambient and high temperature rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware is preferred **

Design Engineer - Must be able to create or modify designs of liquid rocket propulsion hardware associated to high pressure and high temperature static structures, combustion systems and high pressure valve systems.

- Responsible for designing, developing and testing products including providing project time and cost estimate, product manufacturing and evaluation product for quality safety and cost.
- Applies research to the planning design, development and testing of rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware.
- Applies theories of heat and energy transfer to create practical solutions to technical problems
- Responsible for damage tolerance, durability, design modeling, coordination with analysis disciplines.
- Majority of work will be to develop and maintain component and assembly layouts, designs/CAD models, and drawings using Creo2 graphics system for liquid engine hardware.

Activities: conceptual design creation, design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, synthesis of higher level requirements to component level requirements. Conduct trade studies and develop schedules, test plans, component specifications and procedures.

Skills:
- Candidates must have significant experience with Creo & GD&T.
- Higher level certifications are preferred.
- Windchill experience strongly preferred.
- Mechanical Design and development Engineers research, develop, analyze, design, and support fabrication of components using engineering and scientific principles.
- Engineers are also required to analyze and verify product design and performance for adequacy and reliability.
- Support or lead investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards and/or safety initiative activities.
- Must be able to interface well with other members of project or program team, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
- Must be able to prepare and make presentations at both internal and customer design reviews.

Education:
- BS degree in an Engineering field or equivalent.
- MS degree is desired.
 
Job Number: 8028
Job Location: Canoga Park, CA
Rate: $55.00 - $65.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6+ mos
Input Date: 10/09/2017
Last Updated: 01/17/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer - Level 4 CREO / BS required URGENT CA

Description:
7455575
Job Title: Design Engineer - Level 4
60-65/hr max

Number of Positions: 15

Remaining Positions: 5

Please note that a BS degree is required.

Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **



** Candidates must have significant experience with Creo and GD&T (Geometric Dimensioning & Tolerencing). Windchill experience strongly preferred.



** 10 years minimum of related experience as technical Design Engineer in rocket propulsion hardware or equivalent, and 10 years minimum of related experience as technical Designer using ProE/Creo CAD systems **



** Knowledge in the design of high pressure cryogenic, ambient and high temperature rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware is preferred **


Creo
GD&T
5+ years “Design” experience, however drafting skills a plus
BS in Engineering or related field
Prefer: Windchill, and Rocket Design experience.



Design Engineer - Must be able to create or modify designs of liquid rocket propulsion hardware associated to high pressure and high temperature static structures, combustion systems and high pressure valve systems.

Responsible for designing, developing and testing products including providing project time and cost estimate, product manufacturing and evaluation product for quality safety and cost.
Applies research to the planning design, development and testing of rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware.
Applies theories of heat and energy transfer to create practical solutions to technical problems
Responsible for damage tolerance, durability, design modeling, coordination with analysis disciplines.
Majority of work will be to develop and maintain component and assembly layouts, designs/CAD models, and drawings using Creo2 graphics system for liquid engine hardware.
Activities: conceptual design creation, design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, synthesis of higher level requirements to component level requirements. Conduct trade studies and develop schedules, test plans, component specifications and procedures.



Skills:
Candidates must have significant experience with Creo & GD&T. Higher level certifications are preferred.
Winchill experience strongly preferred.
Mechanical Design and development Engineers research, develop, analyze, design, and support fabrication of components using engineering and scientific principles.
Engineers are also required to analyze and verify product design and performance for adequacy and reliability.
Support or lead investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards and/or safety initiative activities.
Must be able to interface well with other members of project or program team, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
Must be able to prepare and make presentations at both internal and customer design reviews.

Education:
BS degree in an Engineering field or equivalent. MS degree is desired.


Skills:
Required

AEROSPACE DESIGN CREO GEOMETRIC DIMENSIONING GEOMETRIC TOLERANCING WINDCHILL


State/Province: California
City/Town: Canoga Park


Start Date: 11/06/2017 Hours Per Week: 40.00
Est. End Date: 09/30/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7455575
Job Location: Canoga Park, CA
Rate: 60-65/hr max
Duration: 10 month contract
Input Date: 01/17/2018
Last Updated: 01/29/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer II

Description:
Position Summary: This position will work with the engineering team and will ensure the successful integration of each design element with the product as a whole. This individual will work both independently as well as part of the larger engineering team. Tasks will include the development of aircraft structural layouts and the design of individual components, assemblies, and installations. Engineering materials will include metals, nonmetals, and composite structural materials. Tasking may also include design and integration of aircraft mechanical systems, hydraulic systems, electrical systems, environmental control systems and a variety of other equipment and systems as needed. Specific duties and responsibilities include but are not limited to the following:

Essential Duties and Responsibilities:

The Design Engineer II will work with minimal intervention and must rely on experience and judgment to plan and accomplish goals while performing a variety of complex tasks in the following areas:

Applies standard engineering practices and techniques, including innovative methodology, to provide effective solutions to problems involving a wide number of variables.

Able to ensure the selection and application of materials and processes are appropriate to each design element with the ability to generate and/or revise specifications when necessary.

Compose compliance matrix to meet customer specification requirements.

In-depth knowledge of standard concepts, practices, and procedures within a specified engineering field.

Proficiency utilizing CATIA V5 engineering design software.

Works on problems of complex scope where analysis of situation or data requires a review of identifiable factors to determine appropriate action.

Ability to guide, mentor and advise other design engineering staff.

Creativity and latitude is expected.

Participate in a variety of process improvement projects.

Able to support design reviews with timely and relevant information and understanding.

Performs other duties as required.

Qualifications & Skills Requirements:

Requires a BSME, BSCE, BSAE, or a Bachelor’s degree in a related engineering field and a minimum of 5-9 years of experience in the Aerospace Industry or in a related field.
Requires proficiency using CATIA V5 and must be highly competent using MS Office products.

Physical Requirements: Individual must be able to sit for extended periods of time, working at a desk and/or attending meetings. May occasionally require employee to stand and/or walk and occasionally lift and/or move up to 10 pounds. Will need to be able to move throughout the office and talk/hear or otherwise communicate with other employees and management. Work will be performed in an office environment. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential duties of the job.

LMI is an equal employment opportunity employer. Consistent with applicable law, LMI provides access and opportunities to those with disabilities. This includes providing reasonable accommodation to individuals with disabilities and disabled veterans who seek to access the company’s online application system. If an applicant is unable to fully access the online application system, LMI will provide a reasonable accommodation. Applicants with disabilities may contact us at 636-916-2400 for assistance accessing the on-line application system. Callers should have a detailed description of the requested accommodation, their name and preferred method of contact ready for LMI‘s Human Resources Department. LMI will make every effort to respond within two (2) business days. This phone number is not for the general submission of application materials.

LMI is an E-Verify Employer.

LMI is an Equal Employment Opportunity/Affirmative Action/Disability/Veterans Employer


Click the link and follow instructions on HOW TO APPLY: LMI ENGINEERING JOB OPPORTUNITIES
 

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer NX UT

Description:
Request number: 5051
Job title: Design Engineer

Number of openings: 1
Position location: Salt Lake - UT
Employment type: Contract
OT exempt: No
Shift: 1st
Education Requirement: BS/BA
Driving on company time?: No
Minimum Years of Experience: 6 years Maximum
Hourly Pay Rate: 60
Start Date: 12/04/2017
Tentative End Date: 06/04/2018

Job Description
Function: **This position is a 6-12 month contract with potential of transitioning to full time direct employment.**


Moog Space and Defense Group in Salt Lake City is looking for a Design Engineer to support our engineering team delivering highly complex electro-mechanical, mechanical, and pneumatic components and systems for flight actuation applications to our Defense Sector customers. A Design Engineer at Moog will contribute to design support of some of the most sought after missile systems in the defense industry.

Essential job functions:
• Perform conceptual design, analysis, assembly/detail drawing creation in NX, and test planning for complex control hardware used on military aircraft
• Validate conceptual problem solutions through trade studies and by applying sound engineering principles
• Perform engineering calculations related to sizing, performance, tolerance and assembly
• Participate in the evolution of conceptual design, technical project planning, detail design, and development testing throughout the program lifecycle
• Represent Moog in a manner consistent with its leading-edge technical reputation
• Create reliable designs through a comprehensive experimental development test program
• Document designs, analyses, and test results with accurate and concise reports
• Team-oriented, with the desire to participate in and contribute to a high functioning team
• Self-starter with strong analytical skills and a desire for constant improvement
Required skills:
• 6+ years of design and development engineering experience
• Proficient in current versions of NX/UG computer-aided design software, 2 years experience minimum
• Good sense of three-dimensional spatial orientation and knowledge of mechanical hardware design
• Proficient in assembly/detail drawings, GD&T, and dimensional tolerance analysis


Education:
• Bachelor’s degree in Mechanical or Aerospace Engineering or related technical field
 
Job Number: JE-5051
Job Location: Salt Lake City, UT
Rate: 60/hr max
Duration: 6-12 month contract with potential of transitioning to full time direct employment
Input Date: 12/13/2017
Last Updated: 01/02/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Controls Engineer

Description:
Manages low to medium complexity projects around the design and planning of layout for assembly and materials handling. Adaptation of low complexity machine or equipment design to factory and production conditions. Planning of sequence of operations and specification procedures for the fabrication of tools and equipment and other functions that affect product performance.
Manufacturing Controls Engineer Controls Engineer supports the overall manufacturing process through the ownership of PLC-related programming, troubleshooting, and support of PLC ladder logic. Responsible for the implementation of engineering changes and assisting various departments with the implementation of new tools and processes and required training.
- Support the plant in all aspects of the electrical maintenance troubleshooting using PLC and robot programming skills and a thorough understanding of the machines sequence of operations.
- Support the new equipment design reviews when required to review the status of the machine design and provide input in reference to the plant's specifications and good design practice.
- Manage the required electrical spare parts in the tool crib to ensure we can support any potential equipment failures on controls related items.
- Respond to any equipment downtime issues in plant and establish any required outside resources to assist in responding to these issues quickly.
- Train and develop the plant electricians to increase their ability to understand and troubleshoot controls related issues in the plant.
- Interface with the equipment supply base to have key resources at our suppliers to assist in equipment problem solving when required. Know who to call when.
- Manage large and small equipment improvement projects in the plant as a leader.
- Complete the capital equipment list for secondary equipment required for the program detailing the cycle time requirements.
- Write detailed engineering specifications for all the tooling and equipment required to purchase, include all relevant legislative requirements.
- Select the suppliers for capital equipment.
- Manage the capital budget for all the necessary equipment purchases.
- Ensure the completion dates for all equipment are met.
- Develop the preventative maintenance plan for the electrical section of new equipment for the production plant.
- Detail training needs for the plant for new equipment.
- Integrate with the launch teams to transfer the technology required for new programs successfully to the plant.

Education / Certifications - A Bachelor’s Degree in Electrical Engineering (or similar related degree). -

Experience / Qualifications:
- College Level Electrical Controls Technology Program
- Completion of 3 year program
- Minimum of three years as a Controls Engineer in a manufacturing facility
- Strong team work capabilities, operating in a multi-function environment to collectively improve operations and resolve related issues
- Experience in programming and troubleshooting problems with robots
- Experience in programming Allen Bradley, Siemens, and Omoron PLC’s
- Experience with assembly processes - Strong mechanical aptitude - Hands-on approach to engineering
 
Job Number: SC39937
Job Location: Florence, SC
Rate: $40.00
Per Diem: Possible
Overtime: Possible
Duration: 10 months
Input Date: 02/21/2018
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Bill Carriveau
Address: 7310 RITCHIE HWY STE 400
City, State: GLEN BURNIE, MD 21061-3092
800 Phone: 866/277-3343
Website: www.apollopros.com

Electrical Technician

Description:
One year in length
Maximum Hourly pay rate $18.00
Tests and troubleshoots electronic products using standard and specialized test equipment. 

1. Troubleshoots electronic products to sub-assembly and component level utilizing schematics and standard troubleshooting practices and procedures 
2. Sets up test equipment and tests electronic products using established test procedures and schematics
3. Provides technical guidance to assemblers and re-work assemblers 
4. Performs cross functional tasks within fairly similar situations resulting in standardized but not identical outcomes

5. Knowledge of the operation and use of electronic production test equipment and hand assembly tools used in a high tech surface mount & through-hole technology manufacturing and production environment
6. Knowledge of advanced electronic test and troubleshooting techniques to component level.
7. Uses product test and measurement equipment, digital/analog voltmeters, oscilloscopes, hi-pot meters, power supplies, and automatic and standard test equipment, etc.
8. Recommends and/or proposes process improvements 
8. Ensures that all relevant quality information/feedback is provided 
10. Utilizes written or visual instructions involving use of quantitative information from specifications, schematics, graphs, pictures, gages, etc.
11. Provides written and/or oral communications concerning a variety of situations following test, troubleshooting, examinations, etc.
12. Keeps workstation, tools and equipment in a neat and orderly manner 
13. Understands and complies with all Company, safety rules and regulations

Requirements/Knowledge: 

v Education Required:
o Associate degree in Electronics (2 year) or certified program (18 mos.) plus 1 year of experience

v Experience 
o 1-3 years of electronics related experience

v Skill Level Required: 
o Skills required in maintaining close specifications using tools & gages, schematics and a variety of electronic equipment 

o Should have a high level of electrical and mechanical aptitude and analytical skills
o Ability to interpret drawing and specifications
o Basic computer skills
o Knowledge of manufacturing processes and how to effectively troubleshoot problems
o Should possess dexterity skills, good hand & eye coordination 
o Willing and able to take and pass basic electronics test 

Desired Qualifications:

v Past experience in a manufacturing environment
v Past experience in a self-directed teaming environment
v Lean manufacturing knowledge
v Understanding of IPC-A-610 standards
 

 
Job Number: 1710063131
Job Location: Bohemia, NY
Duration: 12 months
Input Date: 01/31/2017
Last Updated: 07/17/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Eric Khassanov
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002G9j8AAC&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical/Project Engineer

Description:
Electrical/Project Engineer

Location: Windsor Locks, CT
Pay Rate: $58/hr
Duration: 1 year W2 contract
Shift: First, 8:00am to 5:00pm
**MUST be a U.S. CITIZEN**

Description/Comment:
Manages a team and provides direction on research, development, design, and testing of electrical components, PC Board Layout, Electronics Packaging equipment, facilities, systems, products and networks for commercial, industrial and governmental purposes.

Additional Job Details:
The Human Exploration & Launch business within ISR & Space Systems provides Environmental Control and Life Support Systems in deep space, low earth orbit, undersea, and on the ground. Our hardware is paramount to survival in harsh environments, and our passion for our work demands excellence in everything we do, from the talent we recruit to the highly-engineered systems we deliver. We value people, integrity, ideas and performance. This posting is for a project engineering position at this Company – ISR & Space Systems in Windsor Locks, CT supporting various platforms.
The candidate will work within an Integrated Product Development Team to support the design and development of various electronic controls; will work with the Project Engineer to execute project to meet schedule and budget milestones; and will collaborate with a wide variety of functional areas inside and outside the organization to ensure successful completion of program requirements.

Education
Candidate will have BS in Electrical Engineering with 4 years of working experience in the aerospace industry.

Responsibilities
• Coordinate Integrated Product Development Team activities (design, procurement, fabrication and test)
• Assist Control Account Managers with Earned Value Management (EVMS) by monitoring program cost and schedule performance
• Assist Control Account Manager with Estimate to Complete
• Coordinate activities associated with review and approval of engineering specifications and engineering drawings
• Initiate and process Engineering Changes working with all engineering disciplines to implement approved changes. This will include marking drawings, copying prints, creating PDF’s to support Company electronic Engineering Change process.
• Coordinate, track and support the assembly and test of development hardware
• Support supplier selection and part procurement
• Provide status reports
• Support program reviews both internal and external
• Coordinate closure of action items
• Support operations to fabricate, assemble, test and qualify flight hardware
• Ensure standard work flow maps are complete
• Document activities and programs worked with time spend on various activities. This information will be submitted weekly and summed monthly by person with the monthly invoice.

Skills/Experience
• Ability to perform as part of a cross-functional team and coordinate the activities of various engineering disciplines including electrical and mechanical design, systems, components, materials development, process development, and supplier development
• Strong project management, organizational and prioritization skills
• Ability to work independently or as part of an integrated product team
• Able to understand electrical circuitry and able to recommend trouble shooting test steps to the stakeholders
• Ability to read and understand technical manuals, blueprints or drawings
• Prepare test plans, analyze test data, and prepare reports to support project activity, and maintain up-to-date records of project test results
• Understanding Earned Value Management Basics
• Strong troubleshooting and problem solving skills
• Must understand fundamentals of Root Cause Analysis
• Interface with shop floor personnel for the purpose of communicating technical, quality, and inspection information
• Strong written and verbal skills including thorough knowledge of Microsoft Office products
 
Job Number: 8278
Job Location: Windsor Locks, CT
Rate: 58
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/16/2017
Last Updated: 12/18/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Electro Mechanical Assembler

Description:
 
PDS Tech is seeking Assemblers for open positions in Redmond, WA.
Assembles fabricated parts at floor stations. Tests and calibrates parts and mechanisms to meet tolerances and product specifications. Uses hand tools and power tools to assemble units according to product specifications. Specific tools used will be tweezers, vacuum wands and torque drivers. Identifies units that fail tests or tolerance levels and repairs as necessary. Requires a high school diploma or its equivalent. May be required to complete an apprenticeship and/or formal training in area of specialty. May require 0-2 years of experience in the field or in a related area. Has knowledge of commonly-used concepts, practices, and procedures within a particular field. Relies on instructions and pre-established guidelines to perform the functions of the job. Works under immediate supervision, and reports directly to an area Supervisor. Primary job functions do not typically require exercising independent judgment.
***candidates must have computer skills and be familiar of how to use a computer***
Requires a verifiable high school diploma or its equivalent.
Experience working with microscope; working with microscopic components
 Must be comfortable with microscope work
 Soldering skills/experience required
Must be able to us tweezers, vacuum wands and torque drivers.
Must be able to follow direction, documentation and listening to instruction.
Understanding and awareness of chemicals in the work area
 Must have computer skills
Has knowledge of commonly-used concepts, practices, and procedures within a particular field.
Must be comfortable working in a hood and a Clean Room gown all day
This is an opportunity for contract to hire based on individual work performance, attendance/dependability and Honeywell business needs.
 Work Schedule :
2nd Shift 1500-2330 PST  Mon-Fri
3rd  Shift 2230-0700 PST  Mon-Fri
5th  Shift 1830-0700 PST  Fri -Sun
 
Rates: 
•  2nd shift   “    $ 18.00 Hr.
•  3rd shift    “    $ 19.00 Hr.
•  5th shift    “    $ 19.00 Hr

Candidates must be of U.S. Citizenship OR Green Card Holders
 The minimum level of education required for ISC assignments is High School diploma/GED. Suppliers should obtain a copy of the candidates highest level of education (HSD/GED or degree) to avoid delays in onboarding
 
 PDS Tech is seeking Assemblers for open positions in Redmond, WA.
Assembles fabricated parts at floor stations. Tests and calibrates parts and mechanisms to meet tolerances and product specifications. Uses hand tools and power tools to assemble units according to product specifications. Specific tools used will be tweezers, vacuum wands and torque drivers. Identifies units that fail tests or tolerance levels and repairs as necessary. Requires a high school diploma or its equivalent. May be required to complete an apprenticeship and/or formal training in area of specialty. May require 0-2 years of experience in the field or in a related area. Has knowledge of commonly-used concepts, practices, and procedures within a particular field. Relies on instructions and pre-established guidelines to perform the functions of the job. Works under immediate supervision, and reports directly to an area Supervisor. Primary job functions do not typically require exercising independent judgment.
***candidates must have computer skills and be familiar of how to use a computer***
Requires a verifiable high school diploma or its equivalent.
Experience working with microscope; working with microscopic components
 Must be comfortable with microscope work
 Soldering skills/experience required
Must be able to us tweezers, vacuum wands and torque drivers.
Must be able to follow direction, documentation and listening to instruction.
Understanding and awareness of chemicals in the work area
 Must have computer skills
Has knowledge of commonly-used concepts, practices, and procedures within a particular field.
Must be comfortable working in a hood and a Clean Room gown all day
This is an opportunity for contract to hire based on individual work performance, attendance/dependability and Honeywell business needs.
 Work Schedule :
2nd Shift 1500-2330 PST  Mon-Fri
3rd  Shift 2230-0700 PST  Mon-Fri
5th  Shift 1830-0700 PST  Fri -Sun
 
Rates: 
•  2nd shift   “    $ 18.00 Hr.
•  3rd shift    “    $ 19.00 Hr.
•  5th shift    “    $ 19.00 Hr

Candidates must be of U.S. Citizenship OR Green Card Holders
 The minimum level of education required for ISC assignments is High School diploma/GED. Suppliers should obtain a copy of the candidates highest level of education (HSD/GED or degree) to avoid delays in onboarding
 
Job Number: 1710075032
Job Location: Redmond, WA
Duration: 12 months
Input Date: 10/09/2017
Last Updated: 07/17/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: John Blackmore
Address: TIME SQUARE 660 BUILDING
660 SW 39TH ST STE 215

City, State: RENTON, WA 98057
Phone: 206/763-2840
800 Phone: 800/678-8644
Fax Phone: 206/763-3283
Email: cecjseattle@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000023KWVAA2&URLSource=cjhunter

Electro-Mechanical Design Engineer

Description:
Electro-Mechanical Design Engineer
PDS is looking for experienced Electro-Mechanical Engineers in the San Jose area
Duties
Electro-Mechanical Design Engineer  Individual will be responsible for the hardware development for missile, satellite  and / or fire control electronics and general packaging support. Activity will require: 

Cross functional coordination to complete hardware design effort to support hardware integration for the designed weapon system. 

Research, development and design of components, equipment and networks for military applications.

Basic Qualifications

- Must be able to obtain a security clearance 
- Candidate must have a Bachelor’s degree from an accredited college in a related discipline with a minimum 3.0 GPA
- 3D modeling tools (example would be Pro-E/CREO, Catia, Solidworks or similar)

Desired skills

- Working knowledge of harness design and development.
- Working knowledge of printed wiring board and surface mount technologies is desired.
- Exposure to, or experience with, Pro/Cable for harness development and Cadence for PWB design is a plus.
- Working knowledge of military hardware specifications is desired.
- Desired design experience includes chassis, electro-mechanical assembly, electrical cable and/or network design. Able to interpret electrical schematics for harness development a plus.

 

 



 
Job Number: 1710065206
Job Location: San Jose, CA
Duration: 12 months
Input Date: 03/14/2017
Last Updated: 07/17/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Karla Pelonis
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000021WJXAA2&URLSource=cjhunter

Electro-Mechanical Design Engineer

Description:
Electro-Mechanical Design Engineer
PDS is looking for experienced Electro-Mechanical Engineers in the Los Angeles area
Duties
Electro-Mechanical Design Engineer  Individual will be responsible for the hardware development for missile, satellite  and / or fire control electronics and general packaging support. Activity will require: 

Cross functional coordination to complete hardware design effort to support hardware integration for the designed weapon system. 

Research, development and design of components, equipment and networks for military applications.

Basic Qualifications

- Must be able to obtain a security clearance 
- Candidate must have a Bachelor’s degree from an accredited college in a related discipline with a minimum 3.0 GPA
- 3D modeling tools (example would be Pro-E/CREO, Catia, Solidworks or similar)

Desired skills

- Working knowledge of harness design and development.
- Working knowledge of printed wiring board and surface mount technologies is desired.
- Exposure to, or experience with, Pro/Cable for harness development and Cadence for PWB design is a plus.
- Working knowledge of military hardware specifications is desired.
- Desired design experience includes chassis, electro-mechanical assembly, electrical cable and/or network design. Able to interpret electrical schematics for harness development a plus.

 

 



 
Job Number: 1710065207
Job Location: Los Angeles, CA
Duration: 12 months
Input Date: 03/14/2017
Last Updated: 07/17/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Karla Pelonis
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000021WJcAAM&URLSource=cjhunter

Electro-Mechanical Design Engineer

Description:
Electro-Mechanical Design Engineer
PDS is looking for experienced Electro-Mechanical Engineers in the Phoenix area
Duties
Electro-Mechanical Design Engineer  Individual will be responsible for the hardware development for missile, satellite  and / or fire control electronics and general packaging support. Activity will require: 

Cross functional coordination to complete hardware design effort to support hardware integration for the designed weapon system. 

Research, development and design of components, equipment and networks for military applications.

Basic Qualifications

- Must be able to obtain a security clearance 
- Candidate must have a Bachelor’s degree from an accredited college in a related discipline with a minimum 3.0 GPA
- 3D modeling tools (example would be Pro-E/CREO, Catia, Solidworks or similar)

Desired skills

- Working knowledge of harness design and development.
- Working knowledge of printed wiring board and surface mount technologies is desired.
- Exposure to, or experience with, Pro/Cable for harness development and Cadence for PWB design is a plus.
- Working knowledge of military hardware specifications is desired.
- Desired design experience includes chassis, electro-mechanical assembly, electrical cable and/or network design. Able to interpret electrical schematics for harness development a plus.

 

 



 
Job Number: 1710065209
Job Location: Phoenix, AZ
Duration: 12 months
Input Date: 03/14/2017
Last Updated: 07/17/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Terry Brooke
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000021WJmAAM&URLSource=cjhunter

Electro-Mechanical Design Engineer

Description:
Electro-Mechanical Design Engineer
PDS is looking for experienced Electro-Mechanical Engineers in the San Diego area
Duties
Electro-Mechanical Design Engineer  Individual will be responsible for the hardware development for missile, satellite  and / or fire control electronics and general packaging support. Activity will require: 

Cross functional coordination to complete hardware design effort to support hardware integration for the designed weapon system. 

Research, development and design of components, equipment and networks for military applications.

Basic Qualifications

- Must be able to obtain a security clearance 
- Candidate must have a Bachelor’s degree from an accredited college in a related discipline with a minimum 3.0 GPA
- 3D modeling tools (example would be Pro-E/CREO, Catia, Solidworks or similar)

Desired skills

- Working knowledge of harness design and development.
- Working knowledge of printed wiring board and surface mount technologies is desired.
- Exposure to, or experience with, Pro/Cable for harness development and Cadence for PWB design is a plus.
- Working knowledge of military hardware specifications is desired.
- Desired design experience includes chassis, electro-mechanical assembly, electrical cable and/or network design. Able to interpret electrical schematics for harness development a plus.

 

 



 
Job Number: 1710065205
Job Location: San Diego, CA
Duration: 12 months
Input Date: 03/14/2017
Last Updated: 07/17/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Karla Pelonis
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000021WJIAA2&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electro-Mechanical Technicians (3 Openings)

Description:
One (1) Cable & Harness Specialist / Technician
> 3 – 5+ years extensive experience specialized in cable and harness fabrication / building; someone with heavy Wiring Harness Fabrication (Wire gauges, various types of sheathing, etc) experience.

Two (2) Electro-Mechanical Technicians (
> See “Must have Electro-Mechanical experience with:” below

Job Description:

> Assemble electrical, electronic and/or electro-mechanical assembles, subassemblies or parts, as instructed in accordance to manufacturing documentation (assembly instructions, process documents, schematic, etc.) into sub-units or complete units.
> Wire electronic components, per manufacturing documentation, into sub-units or complete units
> Responsible for soldering and crimping connectors
> Assembles parts into sub-units or complete units, including sub-assembly, process assembly, inspection, modifications, upgrades and rework.
> Completes production/quality related documentation
> Assembles repairs and fabricates parts by operating mechanical equipment or tools, in conjunction with adhering to proper handling and safety requirements (Cutting and Fabrication).
> Performs work in accordance with quality and engineering standards
> Responsible for testing of all electronic assemblies
> Keep work area clean and organized as to present a professional work environment
> Complete any other work related task as directed by supervisor

Job Requirements:

> 5+ years’ experience in manufacturing/production environment with High School Diploma and US Citizenship required
> Must have Electro-Mechanical experience with:
o Soldering (Cup solders)
o Crimping of various terminals (Barrel, Machine, MIL-SPEC, Various ring terminals, RJ 45, BNC)
o Schematic reading and comprehension (Mechanical and Electrical)
o Measuring tools (Calipers, Multi-meters, etc.)
o Hand tools (Wrenches, Screwdrivers, Torque tools, Small power tools)

Preferred Experience:

> Direct experience with Military / Government Contracts within a manufacturing environment
> Preferred Certifications (Current or Non-Current): IPC-A-610, IPC-A-620 or CIS IPC A J-STD-0001
> Experience working in a quality controlled environment

Mark A Ludwig
Vice President
Global American Staffing
Email: mludwig@globalams.us
Office: (508) 230 – 5030 x123
 
Job Number: 039_2017
Job Location: Elkridge, MD
Rate: DOE
Per Diem: Split Possible
Overtime: Yes
Duration: Long-Term
Start Date: ASAP
Input Date: 01/22/2018
Last Updated: 04/02/2018
Firm Name: GLOBAL AMERICAN STAFFING
Attention: Mark A Ludwig
Address: 12 HARDING ST STE 204-205
City, State: LAKEVILLE, MA 02347
Phone: 508/230-5030
800 Phone: 800/510-8050
Fax Phone: 508/923-0005
Website: www.globalamericanstaffing.com

Electronic Troubleshooter

Description:
Tests and troubleshoots electronic products using standard and specialized test equipment. 

1. Troubleshoots electronic products to sub-assembly and component level utilizing schematics and standard troubleshooting practices and procedures 
2. Sets up test equipment and tests electronic products using established test procedures and schematics
3. Provides technical guidance to assemblers and re-work assemblers 
4. Performs cross functional tasks within fairly similar situations resulting in standardized but not identical outcomes

5. Knowledge of the operation and use of electronic production test equipment and hand assembly tools used in a high tech surface mount & through-hole technology manufacturing and production environment
6. Knowledge of advanced electronic test and troubleshooting techniques to component level.
7. Uses product test and measurement equipment, digital/analog voltmeters, oscilloscopes, hi-pot meters, power supplies, and automatic and standard test equipment, etc.
8. Recommends and/or proposes process improvements 
8. Ensures that all relevant quality information/feedback is provided 
10. Utilizes written or visual instructions involving use of quantitative information from specifications, schematics, graphs, pictures, gages, etc.
11. Provides written and/or oral communications concerning a variety of situations following test, troubleshooting, examinations, etc.
12. Keeps workstation, tools and equipment in a neat and orderly manner 
13. Understands and complies with all Company, safety rules and regulations

Requirements/Knowledge: 

v Education Required:
o Associate degree in Electronics (2 year) or certified program (18 mos.) plus 1 year of experience

v Experience 
o 1-3 years of electronics related experience

v Skill Level Required: 
o Skills required in maintaining close specifications using tools & gages, schematics and a variety of electronic equipment 

o Should have a high level of electrical and mechanical aptitude and analytical skills
o Ability to interpret drawing and specifications
o Basic computer skills
o Knowledge of manufacturing processes and how to effectively troubleshoot problems
o Should possess dexterity skills, good hand & eye coordination 
o Willing and able to take and pass basic electronics test 

Desired Qualifications:

v Past experience in a manufacturing environment
v Past experience in a self-directed teaming environment
v Lean manufacturing knowledge
v Understanding of IPC-A-610 standards
 
Tests and troubleshoots electronic products using standard and specialized test equipment. 

1. Troubleshoots electronic products to sub-assembly and component level utilizing schematics and standard troubleshooting practices and procedures 
2. Sets up test equipment and tests electronic products using established test procedures and schematics
3. Provides technical guidance to assemblers and re-work assemblers 
4. Performs cross functional tasks within fairly similar situations resulting in standardized but not identical outcomes

5. Knowledge of the operation and use of electronic production test equipment and hand assembly tools used in a high tech surface mount & through-hole technology manufacturing and production environment
6. Knowledge of advanced electronic test and troubleshooting techniques to component level.
7. Uses product test and measurement equipment, digital/analog voltmeters, oscilloscopes, hi-pot meters, power supplies, and automatic and standard test equipment, etc.
8. Recommends and/or proposes process improvements 
8. Ensures that all relevant quality information/feedback is provided 
10. Utilizes written or visual instructions involving use of quantitative information from specifications, schematics, graphs, pictures, gages, etc.
11. Provides written and/or oral communications concerning a variety of situations following test, troubleshooting, examinations, etc.
12. Keeps workstation, tools and equipment in a neat and orderly manner 
13. Understands and complies with all Company, safety rules and regulations

Requirements/Knowledge: 

v Education Required:
o Associate degree in Electronics (2 year) or certified program (18 mos.) plus 1 year of experience

v Experience 
o 1-3 years of electronics related experience

v Skill Level Required: 
o Skills required in maintaining close specifications using tools & gages, schematics and a variety of electronic equipment 

o Should have a high level of electrical and mechanical aptitude and analytical skills
o Ability to interpret drawing and specifications
o Basic computer skills
o Knowledge of manufacturing processes and how to effectively troubleshoot problems
o Should possess dexterity skills, good hand & eye coordination 
o Willing and able to take and pass basic electronics test 

Desired Qualifications:

v Past experience in a manufacturing environment
v Past experience in a self-directed teaming environment
v Lean manufacturing knowledge
v Understanding of IPC-A-610 standards
 
 
Job Number: 1710066458
Job Location: Bohemia, NY
Duration: 12 months
Input Date: 04/07/2017
Last Updated: 07/17/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Eric Khassanov
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000021ioWAAQ&URLSource=cjhunter

Electronics Technician

Description:
Chipton-Ross is seeking a Electronics Technician in Santa Barbara, CA.

Description
Provides engineering hardware fabrication support, troubleshooting, testing and basic Laboratory operations responsibility. These responsibilities will include fabrication of electronic/electrical chassis' and mechanical rack fabrication using development engineering drawings. Candidate must be capable of working independently, discussing technical issues with customers and working with vendors.

Skill/Experience/Education
Mandatory:
Integrated Circuit Layout Technician. SBF is seeking an experienced integrated circuit technician to help advance the state of the art in infrared and visible imager readout integrated circuits (ROICs). Significant experience with physical layout of mixed signal VLSI CMOS transistor level designs is required. The selected candidate will perform silicon layout of analog and digital submicron transistor level designs in support of advanced infrared cameras and imagers. Designs include ultralow noise analog circuit blocks, low power analog to digital conversion, high speed multi GHz data transmission and serializers. MUST HAVE CMOS integrated circuit layout experience.

Desired:
Schematic capture, design verification and simulation.
 
Job Number: 165226
Job Location: Santa Barbara, CA
Rate: $DOE
Duration: 12 months
Input Date: 09/13/2017
Last Updated: 07/17/2018
Firm Name: CHIPTON ROSS
Attention: Brent Sizemore
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: bsizemore@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer - Level 3

Description:
Embedded Software Engineer - Level 3

Location: Archbald, PA
Pay Rate: DOE ($40/hr - $55/hr)
Duration: 1 year contract
Shift: First, 9/80, OT
Travel: Possible occasional travel to customer or vendor sites
**MUST be a U.S. CITIZEN**
**MUST be ELIGIBLE for a SECRET CLEARANCE – ACTIVE SECRET CLEARANCE PREFERRED**

Description
-Designs, develops, operates, and maintains software and firmware components and computing systems software to be applied to and integrated with engineering, scientific, and manufacturing requirements.
-Applies the appropriate standards, processes, procedures, and tools throughout the system development life cycle to support the generation of such engineering applications and products such as laboratory simulation systems, airplane flight control and display systems, avionics, mechanical and electrical systems, weapons armament, commercial and military aircraft systems, mobile and ground-based defense systems, space systems, and other systems and applications of this nature.
-Interfaces with customers, suppliers, application users, and other technical and support personnel.

Skill/Experience/Education (Mandatory):
- C/C++ programming: (6-8 years' experience required)
-Embedded software: (6-8 years' experience required)
-Hardware/software integration: (4-5 years' experience required)
-Software documentation experience
-Software verification experience
 
Job Number: 7788
Job Location: Archbald, PA
Rate: 40-55
Per Diem: Split Possible
Overtime: Yes
Duration: 1 year
Start Date: ASAP
Input Date: 12/01/2017
Last Updated: 02/05/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer 3

Description:
Engineer 3

Location: Savannah, GA
Pay Rate: $58/hr - $60/hr
Duration: Long Term Contract
Shift: Not specified

Unique Skills:
-The ideal candidate will perform cabin configuration engineering and will have a background in electro-mechanical design and/or integration.
-Understanding of aircraft mechanical component integration along with basic electrical integration and application is highly preferred.
-Position will generate build list configuration and certification strategy for a complete aircraft cabin interior installation.
-Knowledge of business jet cabin interiors is highly desired.

Education and Experience Requirements:
Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Five (5) yrs in specific technical discipline or ten (10) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

Principle Duties and Responsibilities/Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering related field preferred. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 8162
Job Location: Savannah, GA
Rate: 58-60
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 03/07/2018
Last Updated: 03/14/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Engineer Structural- 5- Secret Clearance

Description:
PDS Tech is seeking a candidate for the Engineer Structural 5 position located in Melbourne, FL.  

Perform static, dynamic, and DaDT structural analyses of metallic airframe structure, mechanical systems, and equipment, by hand and by using the automated methods and procedures approved for the program.
Ensure that 
designs meet program requirements and are the lightest, lowest cost, and highest quality products consistent with schedule and budget objectives.
The analyst may also be expected to derive non-flight applied loads, create, extract and 
distribute internal loads, and perform weight and stiffness optimization. T
ools utilized may include FEMAP, NX,Teamcenter 
and other software applications.

Basic Qualifications:



Bachelor of Science degree (ME/AE/CE) with 14 years of experience in AEROSPACE Structural Analysis.




Preferred Qualifications:



Knowledge of FEMAP and NX CAE. Candidate must be able to collaborate in a team environment, prioritize and adjust tasks to accomplish the project result, prioritize multiple responsibilities and/or accomplishing them simultaneously, and comprehend and analyze complex problems and develop solutions. Candidate must be able to collaborate in a team environment, prioritize and adjust tasks to accomplish the project result, prioritize multiple responsibilities and/or accomplishing them simultaneously, and comprehend and analyze complex problems and develop solutions.

 


 
Job Number: 1710075260
Job Location: Melbourne, FL
Duration: 5 months
Input Date: 10/11/2017
Last Updated: 07/17/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Elisa Petersen
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000023L3MAAU&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
FAST Technician Sr.

Description:
FAST Technician Sr.
Denver, CO
Rate: DOE


Unique Skills:

*** This person will be station in the Denver, Colorado area *** Must be able to pass a DOT medical exam and meet all of the qualifications to operate large vehicles.FAA A & P Certificate, FCC license, or NCAT certification required. Valid Driver's License required. Ability to obtain Passport as international travel is a requirement. Must be available on an on-call basis 24 hours a day 7 days a week, with the ability to be on site or dispatched on the FAST aircraft or vehicle within two hours of the initial contact from Company. Must be able to communicate effectively with the customer, scheduling, FAST flight crews, Tech Ops, business office, vendors, Warranty, Field Service Reps and Hangar Ops. Performs required AOG maintenance and necessary servicing of all aircraft mechanical and avionics systems. Must demonstrate the ability to work independently and consistently to perform assigned maintenance and avionics tasks within the quoted or standard CMP time with little or no supervision.


Education and Experience Requirements:

HS diploma/GED. FAA A & P Certificate, FCC license, or NCAT certification required. Valid Drivers License required. Ability to obtain Passport. 8 years combined experience in inspection, maintenance or servicing of large/mid-size acft to include 2 years experience on Company acft.

Position Purpose:

Independently performs a variety of aircraft modifications and maintenance functions on AOG aircraft on road trips and in the Product Support org. Duties include adv troubleshooting, removal and installations of airframes, landing gear, engine components, electrical components, control systems and any other maintenance requirements to assure conformance to procedures, performances, and test specs on customer live in-service aircraft. Supports the customer in diagnosing and resolving technical problems with the aircraft.

Principal Duties and Responsibilities:

Essential Functions: 1. Must be available on an on-call basis, with the ability to be on site or dispatched on the FAST aircraft within two hours of the initial contact from Company. Must be able to communicate effectively with the customer, scheduling, FAST flight crews, Tech Ops, business office, vendors, Warranty, Field Service Reps and Hangar Ops. Acts as the single point of contact between Company and the customer to correctly relay the aircraft schedule and return to service expectations. 2. Performs required AOG maintenance and necessary servicing of all aircraft mechanical and avionics systems. Must demonstrate the ability to work independently and consistently to perform assigned maintenance and avionics tasks within the quoted or std CMP time with little or no supervision. 3. Complies with adv troubleshooting techniques for all model aircraft with assistance from Tech Ops. 4. Orders and receives all tooling and matls needed to service the AOG aircraft. Arranges the shipment of all core units and tooling back to Company. 5. Coordinates with the Inspection Dept to ensure compliance with internal and FAA inspection and doc requirements. Acts as the delegated Quality rep when assigned on road trips. Properly completes work order sign-offs, logbook entries, shift turnovers, expense reports and all other paper work in a timely manner. Ensures that all work accomplished meets quality stds and specs. 6. Establishes and maintains a professional working relationship with the customer and provides one-on-one direct familiarization briefings with the customer during the road trip. 7. Properly identifies (tags) customer property and equipment. Stores aircraft components and other customer property securely and safely. 8. Follows SOPs and JSAs/JRAs when operating GSE, such as power supply, hydraulic rigs, nitrogen filler carts, and oxygen service carts. Operates and supervises use of special support equipment used in removal and installations of major components. 9. Coordinates with Line Service and FBO ops to schedule movement of aircraft and assist with movement of aircraft. Also arranges, as needed, for the overhaul or repair of customer property and inspect/operate all interior installations and record discrepancies. 10. Provides regular updates on aircraft status and all customer support activity to Field Service Rep and management.

Additional Functions: 1. Assists in training new employees. 2. Performs other duties as assigned.

Other Requirements: 1. Formal training in the Company product line maintenance procedures and practices preferred to include Flight Safety Maintenance initial training for specific models required to support. 2. Must possess a working knowledge of the company policies and procedures, Repair Station and QC Manual, pertinent process specs, and technical reference matls. 3. Must possess a strong grasp of all aircraft avionics and mechanical systems and how they are related. Must possess the ability and understanding to comply with all system checkouts on an in-service aircraft.
 
Job Number: 8329
Job Location: Denver, CO
Rate: DOE
Per Diem: N/A
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/29/2017
Last Updated: 02/05/2018
Firm Name: INCONEN CORPORATION
Attention: Cathy O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Finite Element Analysis (FEA)/Finite Element Method (FEM) Mechanical Engineer - Level 3

Description:
Finite Element Analysis (FEA)/Finite Element Method (FEM) Mechanical Engineer - Level 3

Location: Orlando, FL
Duration: 1 year contract
Pay Rate: $65/hr - $75/hr (DOE)
Shift: 1st, 9/80
**Must have an Active Secret Clearance**


Job Description:
-Mechanical Structures / Dynamics Engineer: Perform stress analysis for flight structures and ground test support equipment’s.
-Course work and stress analysis experience must include classical hand analysis as well as finite element analysis methods.
-Job duties may encompass buckling analysis; linear and non-linear stress analysis; composite analysis and mechanism.
-Candidate should be highly skilled in finite element modeling and analysis, with expertise in the use of FEM, Nastran, NX or BETACAE preferred.
-Experience with high velocity impact analysis or flight test random vibration data reduction is a plus.
-Requires good verbal and written communication skills, and ability to work in a team environment.
-Candidate will be required to support designers in determining parts with adequate margins of safety, good load paths, low weight, and high producibility.
-Job duties may also require support to structural test definition, requirements, monitoring, data reduction, and comparison to analysis.


Mandatory Skills:
-Bachelor’s degree from and accredited college in a related discipline, or equivalent experience/combined education, with 8 years of professional experience; or 6 years’ experience with a related Master’s degree.


Desired Skills:
-Mechanical Engineering degree, FEM, NASTRAN, NX or BETCAE skills
-PRO E and/or CATIA skills
 
Job Number: 7019
Job Location: Orlando, FL
Rate: 65.00-75.00
Per Diem: Possible
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 01/31/2017
Last Updated: 12/20/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Readiness Technician D

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Flight Readiness Technician D
(U.S. Citizenship Required*)
Palmdale, CA
2017-5053

Join our team as an Aircraft Inspector – Mechanic, Electrical, Electronics, and Mechanic Flight – to perform operational check out of aircraft prior to and during preflight.

Responsibilities:
• Perform activities prior to flight status and final inspection and daily maintenance of completed experimental aircraft or major modification to experimental aircraft.
• Inspect explosive and armament installations. Inspect and/or perform bench and flight line operational checkout and inspect, trouble-shooting, adjustment and repair of electrical and electronic systems. Inspect the calibration, adjustment, troubleshooting, repair and modification of electronic test equipment used exclusively by production and at times may be required to inspect the calibration, adjustment, trouble-shooting, repair and modification of other electronic test equipment as directed.
• Maintain aircraft historical records.
• Perform aircraft and/or spacecraft bench or flight line operational checkout, trouble-shooting, adjustment and repair of any electrical or electronic system.
• Fabricate, adjust, trouble shoot, repair and modify electronic test equipment.
• Modify parts such as skins, doors, aircraft frames, test panels, clips, brackets, angles and ribs without the aid of jigs and fixtures. Modify aircraft components or aircraft support equipment.
• Perform operational checkout, including diagnosing and correcting malfunctions, of hydraulic systems and mechanical systems.
• Operate engines during run-ups and troubleshoot when needed. Perform engine buildup as assigned.
• Install, repair, and replace tanks, power plants, generators, and aircraft engines. Install or replace reservoirs, etc. and repair leaks in same. Install or replace instruments such as fuel quantity, rate of climb and oil pressure indicators. Install and load ejection seats and guns. Install adjust, repair and replace structural parts and assemblies.
• Splice, route, clamp, solder, and string tie wires or wire bundles.
• Repair, install and hook up bomb, missile and rocket racks and pylons.
• Perform composite repairs

Qualification:
• Required – Active Secret Clearance with the ability to obtain a Top Secret.
• Knowledgeable and skilled in F15 mechanical, structural, power plant, hydraulic, pneumatic, and electrical systems operation and flightline methods and common shop practices.
• Knowledgeable and able to interpret and work from USAF technical orders (T.O.s), blueprints, sketches and written and verbal instructions.
• Proficient using computer systems for office and shop applications.
• Knowledgeable about and able to work in FOD controlled environments.
• Knowledgeable and able to apply shop math.
• Skilled in listening and interpersonal participation, and able to work with others as part of a team which includes giving and receiving feedback, and assisting others in completion of tasks.
• Able to complete and maintain all required training and certifications needed to do job efficiently.
• Able to climb, stand, bend, kneel, reach, crawl, and walk on or around aircraft or work stands and in confined spaces.
• F-15 Crew Chief experienced personnel, sound understanding of Air Force Tech Order usage and application. Experienced Flight Line operations, preflight, launch, recovery, and functional checkout of Hydraulics/Avionics/Mission Systems/Weapons loading.
• F-15 Electrical/Avionics experience, sound understanding of Air Force Tech Order usage and application. Versed in Flight Line Operations, Avionics/Electrical preflight and functional checkout of disturbed systems
• Weapons Load Standardization/Weapons loading: Plans, organizes, participate and directs aircraft armament systems maintenance activities. Establishes and evaluates performance and training standards, maintenance controls, and procedures. Checks methods and techniques used to load and unload munitions on aircraft, to repair and maintain aircraft release and gun systems, and to maintain, repair, and modify associated equipment.

*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Required – specialized vocational training or an Associate's degree and 3 to 5 years work related F15 experience or an equivalent combination of education and experience

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!



APPLY ONLINE HERE: https://careers-moseleytechnical.icims.com/jobs/5053/flight-readiness-technician-d/job?mode=view
 
Job Number: 2017-5053
Job Location: Palmdale, CA
Duration: 12 Months
Input Date: 12/01/2017
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: https://careers-moseleytechnical.icims.com/jobs/5053/flight-readiness-technician-d/job?mode=view
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

Flight Readiness Technician D (4) - CA - C

Description:
Chipton-Ross is seeking 4 Flight Readiness Technician D's located in Palmdale, CA

RESPONSIBILITIES:
Inspector Aircraft, Mechanic Electrical and Electronics, and Mechanic Flight, Individual job duties may include: Perform operational checkout of aircraft prior to and during preflight. Inspect explosive and armament installations. Maintain aircraft historical records. Perform activities prior to flight status and final inspection and daily maintenance of completed experimental aircraft or major modification to experimental aircraft. Inspect and/or perform bench and flight line operational checkout and inspect, trouble-shooting, adjustment and repair of electrical and electronic systems. Inspect the calibration, adjustment, troubleshooting, repair and modification of electronic test equipment used exclusively by production and at times may be required to inspect the calibration, adjustment, trouble-shooting, repair and modification of other electronic test equipment as directed. Perform aircraft and/or spacecraft bench or flight line operational checkout, trouble-shooting, adjustment and repair of any electrical or electronic system. Fabricate, adjust, trouble shoot, repair and modify electronic test equipment. Perform operational checkout of hydraulic systems and mechanical systems. Diagnose and correct hydraulic and mechanical malfunctions. Operate engines during run-ups and troubleshoot when needed. Perform engine buildup as assigned. Install, repair, and replace tanks, power plants, generators, and aircraft engines. Install or replace reservoirs, etc. and repair leaks in same. Install or replace instruments such as fuel quantity, rate of climb and oil pressure indicators. Splice, route, clamp, solder, and string tie wires or wire bundles. Repair, install and hook up bomb, missile and rocket racks and pylons. Install and load ejection seats and guns. Install adjust, repair and replace structural parts and assemblies. Modify parts such as skins, doors, aircraft frames, test panels, clips, brackets, angles and ribs without the aid of jigs and ixtures. Modify aircraft components or aircraft support equipment. Perform composite repairs

ADDITIONAL EXPERIENCE:
Knowledgeable and skilled in F15 mechanical, structural, power plant, hydraulic, pneumatic, and electrical systems operation and flightline methods and common shop practices.
Knowledgeable and able to interpret and work from USAF technical orders (T.O.s), blueprints, sketches and written and verbal instructions.
Knowledgeable and able to use computer systems for office and shop applications.
Knowledgeable about and able to work in FOD controlled environments.
Knowledgeable and able to apply shop math.
Skilled in listening and interpersonal participation, and able to work with others as part of a team which includes giving and receiving feedback, and assisting others in completion of tasks.
Able to complete and maintain all required training and certifications needed to do your job efficiently.
Able to climb, stand, bend, kneel, reach, crawl, and walk on or around aircraft or work stands and in confined spaces.
* F-15 Crew Chief experienced personnel, sound understanding of Air Force Tech Order usage and application. Experienced Flight Line operations, preflight, launch, recovery, and functional checkout of Hydraulics/Avionics/Mission Systems/Weapons loading.
* F-15 Electrical/Avionics experience, sound understanding of Air Force Tech Order usage and application. Versed in Flight Line Operations, Avionics/Electrical preflight and functional checkout of disturbed systems.
* Weapons Load Standardization/Weapons loading: Plans, organizes, participate and directs aircraft armament systems maintenance activities. Establishes and evaluates performance and training standards, maintenance controls, and procedures. Checks methods and techniques used to load and unload munitions on aircraft, to repair and maintain aircraft release and gun systems, and to maintain, repair, and modify associated equipment.


EDUCATION/EXPERIENCE:
This job requires specialized vocational training or an Accredited Associate's degree and 3 to 5 years work
related F15 experience or an equivalent combination of education and experience

VARIABLE SHIFT
WORK HOURS: Candidates need to be available to work 2nd shift, if needed (2nd shift begins at 2:30 PM).

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

 
Job Number: 166698
Job Location: Palmdale, CA
Rate: $DOE
Duration: 12 Months
Input Date: 12/01/2017
Last Updated: 07/17/2018
Firm Name: CHIPTON ROSS
Attention: Brent Sizemore
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: bsizemore@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Engineer

Description:
Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM’s. Located in Seattle, they are a small but rapidly growing company in Seattle, WA. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants.

We are seeking full-time and contract Flight Test Engineers to join us in Moses Lake, WA. The ideal candidate will possess experimental flight test operational experience in either STC or Type Cert Programs. The individual in this position will be involved in a range of airplane flight test operations.

Essential Functions:
Coordinate test and certification requirements.
Author flight test and ground test plans including test hazard analysis.
Author instrumentation specifications, wire diagrams, FTEO packages, and calibration documentation.
Support instrumentation installation as required.
Support ground operations, including weight and balance activities, fuel management, pre-flight and post-flight tasks and briefings.
Support flight and ground test conduct and data collection.
Analyze test data and evaluate compliance with regulations.
Prepare certification test reports.
Domestic and occasional international travel is required.
Desired Qualifications:

5+ years relevant work experience related to experimental flight test operations. Experience in all of the above activities is not critical.
Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.
Ability to think critically, identify and synthesize important information necessary to inform client deliverables.
Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
Demonstrates personal accountability, initiative and versatility on a consistent basis with minimal guidance.
Proficient in working with Microsoft Office applications including Word, Excel, and PowerPoint. Ability to quickly learn to operate new software.
Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
 
Job Location: Moses Lake, WA
Per Diem: possible
Overtime: Yes
Duration: LT
Start Date: asap
Input Date: 11/30/2017
Last Updated: 12/07/2017
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Instrument Project Engineer - Refinery Exp (TX)

Description:
THIS IS NOT FOR AN INTERN, THIS POSITION REQUIRES AT LEAST 10-15 YEARS OF EXPERIENCE.

Basic Function
An Instrument Project Engineer (IE) is responsible for the design and implementation of process instrumentation from initial conception through field installation. They are responsible for designs that provide the most reliable and cost-effective instrument systems. In addition, the IE provides consulting services to process designers in developing process design specifications, develops operating and training manuals for mechanical and process personnel and participates in training operating personnel.

An IE:
• Writes purchase and construction specifications and writes and performs Factory Acceptance Tests.
• Uses vendor software programs for sizing safety and control valves.
• Specifies, procures, and configures Programmable Logic Controllers (PLC) and field hardware such as transmitters, controllers, pneumatic and electronic transmission system.
• Utilizes standards and best practices from American Petroleum Institute (API) and International Society of Automation (ISA), National Fire Protection Association (NFPA) to perform the above functions.

Responsibilities.
The Instrument and Controls Engineer may be responsible for:
• Function as project engineer on instrumentation and capital projects and large maintenance projects.
• Taking lead role on Instrumentation and controls capital projects including PLCs.
• Help identify areas where instrumentation/controls can improve plant operations and profitability.
• Developing capital and expense budget requirements related to instrumentation system upgrades, PM/PdM programs, repairs, expansions, etc.
• Serving as a technical resource to properly identify new and existing equipment specifications and proper operating parameters/ranges for instrumentation equipment.
• Overseeing application and interpretation of National Electric Code and other applicable city, state, federal codes and standards (e.g. NPRA, NFPA, API, ISA).
• Interact with Engineering and Construction contractors, both on-site and off-site.
• Leverage the application of instrumentation safety standards, mechanical integrity, design and maintenance.
• Using documentation systems and processes that maintain accurate instrumentation information and drawings.
• Support criticality assessments of the plant's instrumentation equipment.
• Design and evaluate Refinery Safety Instrumented Systems (SIS). Perform Safety Integrity Level (SIL) analysis and engineering upgrades of safety instrumented systems.

Basic Required Qualifications.
• Must be legally authorized to work in the United States, at least 18 years of age and possess a valid driver’s license.
• Must possess a bachelor’s degree in Electrical Engineering, Chemical Engineering, Mechanical Engineering, or Industrial Engineering.
• Must have three or more years of instrumentation experience and three or more years of direct experience in a refinery, chemical and/or manufacturing industry.
• Demonstrated knowledge and use of SPI (InTools) database and specifications.
• Proficient in the specification, troubleshooting, maintenance and overhaul of process control values.
• Demonstrated knowledge of PLC's.
• Proficient in MS office (Word, Excel, Outlook, Projects).
• Must be willing and able to perform, comply with the following:
• Wear Nomex fire retardant clothing and personal protective equipment (such as steel-toe shoes, ear, and eye protection).
• Maintain face daily so that a respirator/face mask can seal properly (some examples include being free of facial hair and/or clean shaven), climb up to 200 feet in height and work in enclosed spaces such as tanks and silos

Preferred Qualifications:
• Industry certifications (ISA)

FOSTER DESIGN'S BENEFITS:
• Working for a 54-year old company
• Minimum 10 Paid Holidays with no waiting period
• Immediate 401K participation, 1 year 100% vesting schedule, matching employer contribution
• Free Financial Consultant
• Medical/Dental/Vision/Prescription card – BCBS
• MetLife – Long Term Disability Insurance
• Vacation Pay
• Per Diem Assignment Allowance, when applicable
• Per Diem Split, when applicable
• Paid Weekly (Direct Deposit)
 
Job Number: FD-021618TX
Job Location: Borger, TX
Rate: $BOE/HR
Per Diem: Possible
Overtime: Possible
Duration: 11 Months or linger
Start Date: 03/26/2018
Input Date: 03/08/2018
Last Updated: 03/21/2018
Firm Name: FOSTER DESIGN INC
Attention: Recruiter
Address: 200 W DOUGLAS AVE STE 110
City, State: WICHITA, KS 67202
Phone: 316/832-9700
800 Phone: 800/345-3394
Fax Phone: 316/832-9357
Website: www.fosterdes.com

Integration Specialist Technician

Description:
PDS Tech is seeking an Integration Specialist Technician for an open position in Huntsville, AL.
In your role, you will:

  • Perform assigned duties as an individual or as a member of a crossfunctional High Performance Work Team (to include supplier and customer representatives), during all phases of assembly, integration and test from developmental prototyping to the execution of production integration activities. Meet customer satisfaction requirements for quality, performance and reliability.
  • Perform functional checkouts and system testing of electrical, electronic, mechanical systems and ground support equipment. Troubleshoot, fault isolate and document nonconformances to correct malfunctions, to component level, with minimal technical support. Perform, as required, approved rework, modification, repairs and incorporation of changes per technical documentation and formal direction to electrical, electronic and mechanical systems.
  • Assist in defining, implementing, completing and monitoring the execution of the work scope. Make recommendations for refinement to equipment and integration processes by conducting studies and evaluations that result in product and process improvements.
  • Analyze product, process & test data, and rejection history to identify root cause for problems and assist with developing corrective action.
  • May be required to perform duties in and around ordnance or other hazardous materials while maintaining a safe working environment. May be required to obtain a security clearance, per specified program requirements.
  • Perform all elements of mechanical, electrical and electronic assembly, integration and test from detail fabrication, buildup of assemblies & subassemblies, through final integration.
  • Select correct parts, materials and tools to perform assigned duties. Duties may include the handling of hazardous waste (if qualified). Handle and protect components and assemblies in accordance with proper practice and procedures.Move materials from place to place within the work area.
  • Perform critical handling tasks and operate special electrical, electronic, mechanical and support equipment. Use and operate shop tools and equipment including precision measuring instruments and equipment including optics and lasers. Operate various types of shop equipment such as band saw, drill press, sander, bench grinder, metal bending equipment and other related machinery on a variety of materials.
  • Perform assembly work to complete assignments. Related tasks may include fabrication, installation, adjustment, fit check, fastener alignment, connections, and subassembly integration of parts and materials.
  • Perform chemical cleaning, surface finishing, painting, marking in accordance with specifications and procedures.
  • Use any electrical and electronic test equipment, instruments and tools required to perform assigned work, including precision measuring instruments and equipment. Connect, operate and/or verify support equipment, set up and check out of electrical, electronic and mechanical systems.
  • Troubleshoot, fault isolate and document nonconformances.
  • Perform related rework and approved repair necessary to accomplish assignments
  • Devise, develop and assemble approved shop aides and devices that may be required to adjust, test or maintain electrical and mechanical systems equipment.
  • Perform self examination and inspection as certified and required.
  • Plan, sequence and organize work operations to meet production schedules and expedite special jobs.
  • Coordinate information to advise others of situations or conditions that will delay work progress and suggest corrective action.
  • Assist others in the performance of their assigned work giving technical assistance to specifications and requirements as required.
  • Set up and maintain charts, logs, records and reports.
  • Maintain licenses, permits and certifications required to perform assigned work.
  • Perform other duties as assigned within the general job classification
  • Maintain a safe clean and orderly work area.

As our ideal candidate, you will meet the following requirements:
  • High School Diploma or GED
  • Possess technical skills necessary to perform work using detail work instructions & other released planning documentation and a variety of other supporting technical documentation as required including but not limited to: technical drawings, 2D & 3D models, schematics, circuit/wiring diagrams, process and equipment specifications, photographs, illustrations and sketches.
  • Must be a U.S. Citizen.





 
 
Job Number: 1610054052
Job Location: Huntsville, AL
Per Diem: No
Duration: 6 months
Input Date: 09/09/2016
Last Updated: 07/17/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002CGGpAAO&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Laboratory Administrator

Description:
Laboratory Administrator
(Supporting the Mechanical Engineering Labs)

Location: Orlando, FL
Pay Rate: DOE ($17/hr - $23/hr)
Duration: 1 year W2 contract
Shift: First, 9/80, no OT
**MUST be a U.S. CITIZEN**

Job Description:
The position is for a laboratory administrator located within the Mechanical Engineering Labs in the Mechanical Engineering department.
The overall primary job responsibility is to work with labs and internal customers to ensure laboratory work requests are submitted properly, routed to the correct lab, and closed out and archived once the work is complete
A key job function will be to help and support the new electronic work request interface. This will require a working knowledge of Microsoft SharePoint design and administration, as well as Microsoft Access database management.
Additional job duties will include placing and tracking purchase requests, managing chemical inventories, and updating individual lab SharePoint websites.
This position is customer focused, highly visible, and will be essential in growing and modernizing lab operations. The position reports to the Test and Special Processes Lab Group Manager, under the ME Labs Senior Manager, operating as a key section of the Mechanical Engineering Directorate within Engineering and Technology.

Basic/Mandatory Qualifications:
• Excellent organizational and clerical skills.
• Familiarity with Microsoft SharePoint, SharePoint Designer, and InfoPath with the ability to become a SharePoint super user.
• Familiarity managing Microsoft Access databases with ability to learn more advanced functions.
• Capable of scheduling, de-conflicting, and coordinating multiple lab activities concurrently.
• Very proficient in computing within a Windows-based MS Office-suite centered environment for communication, scheduling, data processing, and basic data transfer.
• Demonstrated sound writing and verbal communication skills.
• Minimum of a AA degree
• Able to obtain a DoD Secret Clearance.

Desired Skills:
• Demonstrated experience creating, modifying, and managing Microsoft Access databases.
• Demonstrated experience creating, modifying, and managing Microsoft Share Point sites.
• BS degree
• Current DoD Secret clearance.
 
Job Number: 8141
Job Location: Orlando, FL
Rate: 17-23
Per Diem: Split Possible
Overtime: No
Duration: 1 year
Start Date: ASAP
Input Date: 12/04/2017
Last Updated: 01/03/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Laser Tracker Operator

Description:
Must be US citizen in order to comply with ITAR regulations on this project

Unique Skills:
• This job involves extensive Laser Tracker work on the shop floor. Experience with Laser Trackers is a must
• Ability to read/understand complex blueprints, sketches, verbal instructions and tools.
• Tooling experience and/or relevant training preferred.
• Experience with using precision 3D measurement devices to locate and assemble parts or tools.
• Must be proficient in the use of laser trackers.
• Experience with Metrolog X4 or X4V5 software preferred.
• Experience with Catia V5 software preferred.

Principle Duties and Responsibilities:
• Interpret & consolidate aircraft engineering, tooling designs and production requirements, to develop optimized measurement plans and processes.
• Under minimal supervision, develop programing for all measurement equipment that will be used in the development, manufacture and support of aircraft.
• Collaborate with engineering, tooling, manufacturing engineering and operations to determine optimal manufacturing procedures.
• Assist in developing and documenting standards for the handling and utilization of metrology equipment.
• Create standardized inspection reports through the utilization of Metrologic software.
• Study and optimize equipment performance for increased capacity and equipment efficiency.
• Interact and collaborate with equipment vendors on warranty repairs, necessary improvements and upgrades.
• Set up and utilize precision measuring tools; validates measurement results for accuracy and repeatability.
• Provide and/or contribute to the documentation of new or recent processes involving metrology techniques or equipment.
• Coordinate the implementation of projects between multiple organizations.
• Support all Safety, Sustainability and Ergonomic Initiatives.
• Work to improve daily processes, and ensures all work meets customer requirements.
• Assist tool shop as needed, during periodic and conformity Inspections.
• Provide input toward the selection of metrology equipment and software.

Education and Experience Requirements:
• Bachelor's Degree in Mechanical Engineering or a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Eighteen (18) months of Metrology Engineering, Manufacturing Engineering, Automation Engineering or related technical experience.
 
Job Number: 24-211
Job Location: Savannah, GA
Rate: $50 - $55
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 11/16/2017
Last Updated: 02/06/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Lead Systems Engineer

Description:
Lead System Engineer

Location: Windsor Locks, CT
Pay Rate: $75/hr
Duration: 1 year W2 contract
Shift: First, 8:00am to 5:00pm
**MUST be a U.S. CITIZEN**

Description/Comment:
An EMU Systems Engineer is a versatile professional with a base degree in Mechanical, Chemical, or Aerospace Engineering and experience in one or more disciplines such as electro-mechanical design, test, mechanical design, or analysis. Cross-functional experience is highly desired.

This Company at Windsor Locks was originally the Prime Contractor for NASA’s Extravehicular Mobility Unit and is currently responsible for the life support system (backpack) and other hardware. The EMU is a long standing system that has seen operation since 1981. As such, the ability to understand and build from previous analysis, design and fleet leader assessments is paramount. Reading engineering drawings, assessing operations and test sheets, as well as assessing data from ground and flight are all key abilities. EMU Systems Engineers are involved in assessing proposed engineering changes, making specification changes/updates, certification and recertification testing and reporting, customer interfacing for real time issues, monitoring system performance on EVA and many other related tasks, often involving customer interfacing.

Ability to perform gas and fluid analysis is important. Previous experience with High Pressure O2 is a big plus. Knowledge of the typical suite of MS products is required. Other software knowledge, including heat transfer, fluid and gas flow is a plus.

Both strong oral and written skills are required. Verbal and oral skills should be professional in character and precise. Candidates must be able to work in a small, highly scrutinized, tight knit team with the goal of crew safety as their defining characteristic.

Education/Requirements:
-Bachelors degree or higher
-Special NASA drug screen will be required post-employment
 
Job Number: 8280
Job Location: Windsor Locks, CT
Rate: 75
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/16/2017
Last Updated: 12/20/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MM-System Engineering DMSMS–Grade 04

Description:
EDUCATION
BS, Electrical/Mechanical Engineering
MS, Electrical/Mechanical Engineering

Experience as design/ component engineer with semiconductor industry, an electrical component engineer with an Avionics OEM (Original Equipment Manufacturer), or as a DMSMS (Diminishing Manufacturing Sources and Material Shortages)/Obsolescence Technical Engineer.

Provide design guidance to engineering/suppliers for use of preferred parts to minimize impact from DMSMS

Review new designs and propose replacement options for both electrical and mechanical component selections based on cost, volume, DMSMS, reliability, quality and availability.
Interface with equipment manufacturers and LRU suppliers to clarify parts support, availability and recommended resolutions.

Manage component lifecycle and Bill of Material grading through DMSMS forecast tool [e.g. Silicon Expert, IHS, Q-Star, etc.] to identify, forecast, and resolve obsolete component issues.
Investigate and close DMSMS issues from engineering, production, and/or fielded parts.
Identify and analyze critical parts and recommend resolutions for proactive monitoring efforts.

Develop processes and lead working group meetings to track status and action items for a given design or manufacturing issues regarding; DMSMS, failure analysis, corrective actions, and root cause analysis.
Measure and track internal metrics to ensure DMSMS processes are being followed and implemented.
 
Job Number: 17-699-1616
Job Location: Northeast
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 01/29/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Machinery Designer

Description:
Designs components or portions of systems and modifies existing designs to develop or improve products and facilitate manufacturing operations. Utilizes computer-aided design equipment and/or graphic tools such as, CAD, CAM or CATIA. Gathers information, makes studies, computes calculations, and prepares original rough layouts, sketches to present design proposal. Coordinates design criteria with engineering, manufacturing, tooling, material, and planning group such as ease of manufacture, availability of materials, and contractual specifications. Exclude classifications in which incumbents predominantly perform drafting assignments.
This position may be filled from the entry level to the senior level of the job family. The position requires an Associate's degree in drafting/engineering technology or equivalent drafting experience, plus one year or more years of drafting/design experience preferred. Naval design experience is desirable.
A candidate must have a thorough knowledge of accepted design/drafting methods and concepts, and be familiar with basic engineering and design principles relating to machinery design work. The candidate for this position should be proficient in the use of 2D and 3D drafting software tools such as AutoCAD, Inventor and/or Siemens NX and have familiarity with Naval Machinery design in one or more of the following technical areas, including structural closures, Capstans, elevators, winches, hoists, hydraulics, arresting gear or other heavy mechanical components. Prior Aircraft Carrier Design experience is a plus.
Candidates must have experience with 2D and 3D CAD, Electrical Wire way designs, equipment arrangement layouts and/or cable routing experience.
 
Job Number: 7864214
Job Location: Newport News, VA
Rate: open
Per Diem: possible
Overtime: possible
Duration: 1 year
Start Date: 1/2/2018
Input Date: 11/24/2017
Firm Name: TASC TECHNICAL SERVICES
Attention: Stephen
Address: 73 NEWTON RD
P O BOX 1315

City, State: PLAISTOW, NH 03865
Phone: 603/382-1114
Fax Phone: 603/382-2377
Website: www.tasctech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Manufacturing Engineer performs technical studies and conduct analysis of operations (existing or proposed). Develop plans and recommendations for equipment and tooling needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. Author DRDI/DMT reworks instructions to support effective corrective actions. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. Basic knowledge of Lean and/or Six Sigma principles. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, etc. Lean Specialist certification or higher preferred.

Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
 
Job Location: Savanah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/29/2017
Last Updated: 03/09/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Manufacturing Engineer 2 – Production and Fabrication

Location: Redmond, WA
Rate: $30.00 - $38.50/HR
Duration: 5 month contract

**MUST be a U.S. Citizen**

Duties:
The Production Manufacturing Engineer will be responsible for working directly with a program assigned manufacturing engineer in an integrated program team (design, quality, contracts and program), to ensure all engineering/manufacturing requirements are met within manufacturing documentation. This will require working directly with assembly/test technicians to implement processes, and look for ways to continually improve them. Create work instructions, bills of materials, routings.

Skills:
Required: Microsoft Office Suite, creation of work instructions, creation of bills of materials

Desired: Delmia, Teamcenter, MRP/ERP, Solid Modeling

Education:
- Bachelors in Manufacturing Engineering, Mechanical Engineering and/or Associates with 5+ years experience and/or 7+ years applicable experience
 
Job Number: 8191
Job Location: Redmond, WA
Rate: $35.00 - $38.50/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 5 mos
Input Date: 11/06/2017
Last Updated: 12/18/2017
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer (15 plus needed)

Description:
Unique Skills:
• Catia V5, SAP and Solumina experience.

Principal Duties And Responsibilities:
• Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
• Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
• Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
• Investigate and assist in preparing justification for equipment and facility requests.
• Perform producibility studies from engineering drawings.
• Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
• Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures.
• Incorporate Lean Manufacturing Methodology into existing and future processes.
• Utilize CADAM/CATIA data and nesting software to generate flat patterns, Master Models, NC data, and ply nests to meet Engineering and Manufacturing requirements.
• With minimal supervision, lead/coordinate the implementation of projects between multiple organizations
• Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
• Support all Safety, Sustainability and Ergonomic Initiatives.
• Aid in development and maintenance of Business Continuity Plan.

Other Requirements:
• Proven knowledge of Lean and/or Six Sigma principles.
• Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
• Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, etc.
• Lean Six Sigma Greenbelt Certification or higher preferred.

Experience/Education:
• Bachelors degree in Mechanical, Manufacturing Engineering or related curriculum, or an equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Three (3) years Manufacturing Engineering, planning, or related technical experience.
 
Job Number: 24-206
Job Location: Savannah, GA
Rate: $50 - $55
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 02/22/2018
Last Updated: 03/19/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer (PWA and LRU Assembly) CA

Description:
13701

Title TEMP Staff Manufacturing Engineer (PWA and LRU Assembly)
Job Summary General Atomics Aeronautical Systems, Inc. (GA-ASI), an affiliate of General Atomics, is a world leader in proven, reliable remotely piloted aircraft and tactical reconnaissance radars, as well as advanced high-resolution surveillance systems.

We recognize and appreciate the value and contributions of individuals with diverse backgrounds and experiences and welcome all qualified individuals to apply.

Support the design (DFM), first article, production, test, and system integration of Printed Wiring Assemblies and Line Replaceable Units for all UAV platforms including Ground Control Stations (GCS). Assemblies will include surface mount as well as through hole technology and mechanical assembly.

Duties and Responsibilities •Responsible for manufacturing process development, implementation, and continuous improvement to enhance Quality / Yield, reduce Cost, and improve Productivity / Schedule. Initiate and lead lean manufacturing process improvement projects.
•Specify and implement automation equipment and processes.
•Identify and assist in addressing safety issues on the manufacturing floor.
•Support manufacturing production planning and coordination, execution and operations process development.
•Provide production support to assemblers and leads.
•Document manufacturing processes and assembly work instructions in conjunction with T&O Planning.
•Design shop aids and tooling to assist production.
•Disposition non-conforming parts, identify root cause, and implement corrective and/or preventive action to reduce scrap and rework.
•Collaborate with Design Engineering during prototype, development and first article manufacturing.
•Expertise in assembly methods and processes, including surface mount technology, through hole technology, mechanical assembly, and testing. Experience in both analog and digital technologies as well as a background with RF.
•Experience with development and deployment of manufacturing automation and remaining current with technology.
•Experience with Electrical Schematics and Circuit Diagrams; Drawings and BOMs; Assembly Instructions; Engineering Change systems; Quality systems for non-conforming parts and corrective action. Experience with Lean Manufacturing methodologies for waste reduction, e.g.: 5S, Standard Work, TAKT, Pull System, 5S, Value Stream Mapping, cell design, and manufacturing flow.
•Clearly and effectively communicate both verbally and in written form to both technical and non-technical audiences, especially regarding manufacturing processes, engineering issues and proposed changes, and quality issues and dispositions.

Qualifications Essential Qualifications Typically requires a bachelors degree, masters degree or PhD in engineering or a related technical discipline from an accredited institution and progressive engineering experience as follows; nine or more years of experience with a bachelors degree, seven or more years of experience with a masters degree, or four or more years with a PhD. May substitute equivalent engineering experience in lieu of education. Demonstrates an extensive technical expertise and application of engineering principles, concepts, theory, and practice with the ability to organize, plan, schedule, conduct, and coordinate workloads to meet established deadlines or milestones with some experience in project leadership. Must possess the ability to understand new concepts quickly and apply them accurately throughout an evolving environment. Strong communication, presentation, and interpersonal skills are required enabling an effective interface with other departments and/or professionals, and capable of representing the organization as a prime technical contact, as well as providing leadership and guidance to less experienced professionals. Customer focused, formulates plans based on the development of innovative new designs in resolving advanced technical engineering problems. Must be able to work both independently and in a team environment. Able to work extended hours as required. A Professional Engineering License, original work(s) published in professional engineering journals, and invited to present one or more original works to an engineering symposium are desirable.
Additional Qualifications Typically requires a bachelors degree, masters degree or PhD in engineering or a related technical discipline from an accredited institution and progressive engineering experience as follows; four or more years of experience with a bachelors degree or two or more years of experience with a masters degree.
•Experience with IPC & MIL standards, including: IPC/WHMA-A-610 and 620 , J-STD-001 – Requirements for Soldered Electrical and Electronic Assemblies, MIL-STD-1553 – Digital Time Division Command/Response Multiplex Data Bus, MIL-STD-1760 – Aircraft Electrical Interconnection System, SAE-AS39029 (MIL-C-39029)– Experience implementing capital equipment in factory environment.
•Experience with MRP systems, eg SAP or MTO/WDS. Experience with Microsoft Office Project and Visio.
•Experience with programming.
•Experience with databases, e.g. Oracle and FileMaker. Knowledge of SQL.
•Experience with process mapping and demand flow technology
•Strong background in electro-mechanical assemblies.
•Six Sigma Green Belt
City San Diego
State California
Travel Percentage Required 0% - 25%
Clearance Required? No
Work Schedule Rule 9/80
Temp Assignment Duration (# of Days) 180
 
Job Number: JE-13701
Job Location: San Diego, CA
Duration: 6 month contract
Input Date: 03/05/2018
Last Updated: 03/12/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer - Level 1

Description:
Location: Lexington, KY
Rate: $20.00 - $35.00/HR
Duration: 1 year contract

**MUST be a U.S. Citizen**
**MUST have an Active Secret Clearance or to have had one with the last two (2) years**

Job Description:
- Designs manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, machining and material handling.
- Designs arrangement of machines within plant facilities to ensure most efficient and productive layout.
- Designs sequence of operations and specifies procedures for the fabrication of tools and equipment and other functions that affect product performance.
- Adapts machine or equipment design to factory and production conditions.
- May incorporate inspection and test requirements into the production plan.
- Inspects performance of machinery, equipment, and tools to verify their efficiency, and investigates and initiates corrective action of problems and deficiencies to ensure product quality.
- Develops manufacturing processes that are applicable to statistical process control, and may develop those techniques.
- Provides guidance to engineering regarding design concepts and specification requirements to best utilize equipment and manufacturing techniques.
- Ensures processes and procedures are in compliance with regulations.

Skill/Experience/Education
Mandatory:
- Mechanical, Electrical, Aerospace Engineering Degree.
- 1st, 2nd or 3rd shift schedules may be required.
- On-aircraft and off operations.
- In this role, the employee will review mechanical designs for ease of manufacturing and work closely with design engineering for improvements.
- The employee will use their knowledge of interpreting and reading engineering design drawings to develop fabrication routers/work instructions.
- This role will also require the employee to develop bill of materials (BOMs) based on drawing parts lists.
- The employee will work with manufacturing on issues and process improvements.
- Active Secret Security Clearance within the last 2 years.

Desired:
- Job scope experience
- Team Center Engineering experience
- Production Engineering experience
- Production Operations experience
- Mechanical Experience
- Electrical Experience
- Lean Six Sigma practices SOF CLSS contract, facility, and customer knowledge
- Ability to read and interpret engineering drawings
- Excellent verbal and written communications skills
 
Job Number: 7709
Job Location: Lexington, KY
Rate: $20.00 - $35.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 08/02/2017
Last Updated: 02/14/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer I

Description:
Manufacturing Eng I
Savannah, GA
Rate: $35

Unique Skills:

Solumina and SAP experience is a plus.


Education and Experience Requirements:

Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Entry level position.


Position Purpose:
Under moderate supervision, create manufacturing work instructions, assist with Planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.



Principle Duties and Responsibilities:

Essential Functions: 1. Perform technical studies and conduct analysis of operations (existing or proposed). Develop plans and recommendations for equipment and tooling needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility. 10. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 11. Author DRDI/DMT rework instructions to support effective corrective actions. 12. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Perform productibility studies from engineering drawings. 5. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 6. Incorporate Lean Manufacturing Methodology into existing and future processes. 7. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 8. Support all Safety, Sustainability and Ergonomic Initiatives. 9. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Work on special projects. 2. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 3. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Basic knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, etc. 4. Lean Specialist certification or higher preferred.
 
Job Number: 8335
Job Location: Savannah, GA
Rate: $35
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/29/2017
Last Updated: 12/12/2017
Firm Name: INCONEN CORPORATION
Attention: Cathy O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer I

Description:
Manufacturing Engineer I

Location: Savannah, GA
Rate: $35-40/HR
Duration: Long Term Contract



Unique Skills:
Experience in SAP/Solumina preferred

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Entry level position.


Position Purpose:
Under moderate supervision, create manufacturing work instructions, assist with Planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.


Principle Duties and Responsibilities:

Essential Functions: 1. Perform technical studies and conduct analysis of operations (existing or proposed). Develop plans and recommendations for equipment and tooling needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility. 10. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 11. Author DRDI/DMT rework instructions to support effective corrective actions. 12. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Perform productibility studies from engineering drawings. 5. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 6. Incorporate Lean Manufacturing Methodology into existing and future processes. 7. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 8. Support all Safety, Sustainability and Ergonomic Initiatives. 9. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Work on special projects. 2. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 3. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Basic knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, etc. 4. Lean Specialist certification or higher preferred.
Languages Required (in addition to English): None
 
Job Number: 8040
Job Location: Savannah, GA
Rate: $35-40/HR
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/01/2017
Last Updated: 01/12/2018
Firm Name: INCONEN CORPORATION
Attention: Cathy O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer I

Description:
Manufacturing Engineer I
Savannah, GA
Rate: $30-$35

Unique Skills:

Must be a U.S. Citizen


Education and Experience Requirements:

Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Entry level position.


Position Purpose:
Under moderate supervision, create manufacturing work instructions, assist with Planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.



Principle Duties and Responsibilities:

Essential Functions: 1. Perform technical studies and conduct analysis of operations (existing or proposed). Develop plans and recommendations for equipment and tooling needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility. 10. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 11. Author DRDI/DMT rework instructions to support effective corrective actions. 12. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Perform productibility studies from engineering drawings. 5. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 6. Incorporate Lean Manufacturing Methodology into existing and future processes. 7. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 8. Support all Safety, Sustainability and Ergonomic Initiatives. 9. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Work on special projects. 2. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 3. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Basic knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, etc. 4. Lean Specialist certification or higher preferred.
 
Job Number: 8166
Job Location: Savannah, GA
Rate: $30-$35
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/01/2017
Last Updated: 01/12/2018
Firm Name: INCONEN CORPORATION
Attention: Cathy O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Location: Savannah, GA
Rate: $50.00 - $55.00/HR
Duration: Long Term contract
Shift: 1st Shift

****MUST be a U.S. Citizen or Permanent Resident****

Unique Skills:
Experience with Catia V5, SAP, and Solumina highly preferred. Must be able to work with production and engineering personnel to resolve issues. Must be able to generate build plans and manufacturing bill of materials from 3D data.

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 7989
Job Location: Savannah, GA
Rate: $50.00 - $55.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 04/25/2018
Last Updated: 07/10/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Location: Savannah, GA
Rate: $50.00 - $55.00/HR
Duration: Long Term contract

**MUST be a U.S. Citizen or Permanent Resident**

Unique Skills:
Requires experience in aviation manufacturing. Requires experience in Solumina, Catia, Microsoft Office, and ERP software.

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 8135
Job Location: Savannah, GA
Rate: $50.00 - $55.00/HR
Per Diem: Possible
Overtime: Possible
Duration: LT
Input Date: 12/05/2017
Last Updated: 01/12/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
UNIQUE SKILLS
Solumina, CATIA and SAP preferred. Prefer prior experience on live aircraft and/or in environment of aircraft reconfiguration.

EDUCATION AND EXPERIENCE REQUIREMENTS
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.


POSITION PURPOSE
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

PRINCIPLE DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. Author DRDI/DMT rework instructions to support effective corrective actions. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
4. Investigate and assist in preparing justification for equipment and facility requests.
5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for manufacturing assessments with Engineering.
6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures.
8. Incorporate Lean Manufacturing Methodology into existing and future processes.
9. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations.
10. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
11. Support all Safety, Sustainability and Ergonomic Initiatives.
12. Aid in development and maintenance of Business Continuity Plan.

ADDITIONAL FUNCTIONS
1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality.
2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

OTHER REQUIREMENTS
1. Proven knowledge of Lean and/or Six Sigma principles.
2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 17-752-105442
Job Location: Southeast
Rate: $55.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 02/28/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Savannah, GA
Rate: $50-$55
Long Term contract
1st Shift



Unique Skills:
Knowledgeable with CATIA, SAP, Solumina software programs. Aircraft experience with aircraft shop support and creating work instructions.


Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.


Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 8217
Job Location: Savannah, GA
Rate: $50.00 -$55.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 03/21/2018
Last Updated: 04/24/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II/III

Description:
Location: Canoga Park, CA
Rate: $30.00 - $48.00/HR (DOE)
Duration: 6 month contract
Shift: Regular 40 hour week. OT Possible


** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


** Looking for go getters with positive, can-do attitudes. Candidates must be open to learning and be able to take initiative. This is by far the most important attribute needed **


Duties:
The Manufacturing Engineer classifications are responsible for design, fabrication, modification, analysis and evaluation of manufacturing operations, processes, procedures and production layouts for the support of manufacturing/assembly operations such as rocket motor propellant and/or insulation manufacture, equipment installation, machining, metal forming, welding and brazing, and material handling.


Skills:
Required Skills:
-Designing and planning of layout component fabrication, assembly and material handling, planning of sequence of operations, and specification procedures.
-The scope of responsibility will be for several mechanical components or as a process engineer supporting new and developing process.

Desired Skills:
-Tight tolerance machining, Welding, Design systems (ProE, CATIA, VisMockup, CAD/virtual manufacturing) .
-Manufacturing fabrication and assembly processes and systems. Verbal and written communication.
-Project management skills and MS Office applications ( Word, Excel).
-Experience with Maestro, Delmia and Windchill are preferred, not required.
-Aerospace experience preferred but not required.


Education:
- BS degree in Manufacturing /Industrial Technology or Engineering required
 
Job Number: 8010
Job Location: Canoga Park, CA
Rate: $30.00 - $48.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 03/12/2018
Last Updated: 06/11/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II/III URGENT CA

Description:
7347633
Job Title: Manufacturing Engineer II/III
48/hr max

Number of Positions: 10



Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **



** Looking for go getters with positive, can-do attitudes. Candidates must be open to learning and be able to take initiative. This is by far the most important attribute needed **
Also, Delmia, Maestro and Windchill are preferred, not required.




-There are two (2) Level II openings and two (2) Level III openings.



The Manufacturing Engineer classifications are responsible for design, fabrication, modification, analysis and evaluation of manufacturing operations, processes, procedures and production layouts for the support of manufacturing/assembly operations such as rocket motor propellant and/or insulation manufacture, equipment installation, machining, metal forming, welding and brazing, and material handling.

Skills:
Required Skills:

-Designing and planning of layout component fabrication, assembly and material handling, planning of sequence of operations, and specification procedures.

-The scope of responsibility will be for several mechanical components or as a process engineer supporting new and developing process.



Desired Skills:

-Tight tolerance machining, Welding, Design systems (ProE, CATIA, VisMockup, CAD/virtual manufacturing) .
-Manufacturing fabrication and assembly processes and systems.Verbal and written communication.

-Project management skills and MS Office applications ( Word, Excel).

-Experience with Maestro, Delmia and Windchill are preferred, not required.

-Aerospace experience preferred but not required.



Keywords:

-Manufacturing Engineer

-Propulsion components

Education:
BS degree in Manufacturing /Industrial Technology or Engineering required

Skills:
Required

MANUFACTURING ENGINEERAEROSPACE

State/Province: California
City/Town: Canoga Park

Start Date: 10/23/2017 Hours Per Week: 40.00
Est. End Date: 04/22/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7347633
Job Location: Canoga Park, CA
Rate: 48/hr max
Duration: 6 month contract
Input Date: 04/25/2018
Last Updated: 06/08/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer Sr.

Description:
Location: Redmond, WA
Rate: $40.00 - $47.50/HR
Duration: 5 month contract

**MUST be a U.S. Citizen**

Duties:
In this role, you will lead manufacturing activities and work with a cross-functional team of engineers, as well as program management, assembly technicians, and test personnel to ensure quality manufacture of mechanical hardware. Responsibilities include manufacturing process development/maintenance, supplier support, work instruction creation, tool design, personnel training, process ownership, and management of hardware flow through production including budget and schedule. Create work instructions, bills of materials, routings.


Skills:
Microsoft Office Suite, creation of work instructions, creation of bills of materials

Desired Skills: Delmia, Teamcenter, MRP/ERP, Solid Modeling

Education:
Bachelors in Manufacturing Engineering, Mechanical Engineering and/or Associates with 10+ years experience and/or 15+ years applicable experience
 
Job Number: 8192
Job Location: Redmond, WA
Rate: $40.00 - $47.50/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 5 mos
Input Date: 11/28/2017
Last Updated: 02/14/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Mechanic

Description:
Perform maintenance in support of manufacturing facility on a variety of equipment throughout facility including machinery repairs, preventative maintenance, machine relocation, fabrication, welding, electrical repair and installation, plumbing (air, hydraulic, water) with use of a variety of equipment.  Responsible for monitoring hazardous waste for removal, maintenance of chemical storage area and clean up of chemical spills as required.  Nontoxic or non-hazardous.  Mainly Soap and/or grease
Will be operating a crane or fork lift.
 
Responsibilities:
Provide maintenance support in all areas of manufacturing facility including but not limited to machinery repairs, preventative maintenance, machine relocation, fabrication, welding, electrical repair and installation, plumbing (air, hydraulic, water) with use of a variety of equipment such as hand tools, welding equipment, fork lifts, and precision measuring equipment.  Maintain and develop preventative maintenance program for production related equipment.  Required to perform work in compliance to all safety and EHS policies and procedures. 
 
Qualifications:
  • Knowledge of EHS procedures and policies
  • Knowledge and safe use of production related equipment
  • Working knowledge and use of welding, electrical, and plumbing equipment including repair and maintenance of machinery
  • Millwright Skills and familiar with Electrical and/or Hydraulic
  • Able to interpret OEM handbooks and/or plant diagrams
  • Understanding of reading building plans and electrical schematics
  • Ability to use trouble-shooting and precision measuring equipment
  • Where applicable, trained in maintenance processes such as but not limited to welding, plumbing, electrical and mechanical troubleshooting
  • Vocational or technical training in a maintenance related discipline, strongly preferred

 
Training requirements:

  • Demonstrated ability to comply to maintenance safety procedures such as lock-out tags, etc.
  • Demonstrate ability to safely complete job tasks utilizing manual equipment as well as use of gauges needed for repair fabrication
  • Demonstrate ability to perform preventative maintenance, and repair of facilities equipment
  • Where applicable, complete safety and maintenance training and or certification

 
 
 
 
 

 
Job Number: 1610060095
Job Location: KS City, MO
Duration: 12 months
Input Date: 01/25/2017
Last Updated: 07/17/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Eric Khassanov
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002FtZOAA0&URLSource=cjhunter

Mechanic Technician II

Description:
PDS Tech is seeking several mechanics for positions in Kansas City.
Must have steel toed shoes/boots; all assignments are one year in length
TWO - 1ST Shift KCR Remanufacturing Techs - Kansas City MO
 
 
 
Work may involve used mechanical parts. Aprons & Coveralls are available to contractors; must have steel toed shoes
  
 Operation of Overhead Cranes is involved in this job
Essential Functions / Responsibilities:*Perform disassembly, clean, requalification, rework and assembly operations on Traction Motor Combo component utilizing manual equipment and automated equipment in accordance with manufacturing and quality procedures. Inspect work completed on components to internal inspection criteria for compliance to quality or engineering requirements. Responsible to perform work in a safe manor in support of lean manufacturing principals such as but not limited to 5s or single piece flow to required takt time. In some cases may have to perform special process such as welding or non-destructive testing which will require special process training or certification. Operation of overhead cranes
Basic Qualifications / Requirements:*• Must have high school diploma or GED at a minimum
Knowledge of EHS procedures and policies
• Knowledge of safe use manual equipment and hand tools for assigned product lines.
• Working knowledge of use of inspection measurement equipment
• Understanding of all manufacturing and quality procedures associating assigned product line in a lean manufacturing environment
• Maintain acceptable defect rates
• Successful completion of training requirements
• Where applicable, trained in special processes such as but not limited to welding or non-destructive testing
Desired Qualifications:*• Demonstrate ability to safely complete job tasks utilizing manual or automated equipment as well as use of gages needed for inspection or testing as required
• Demonstrate ability to document and record inspection results per in-house procedures
• Successful completion of quality audit to internal procedures on assigned product line and/or use of equipment

 

For consideration to this position, please contact Earl Sawyer at esawyer@pdstech.com or 843-277-6616.


 
Job Number: 1710067688
Job Location: KS City, MO
Duration: 12 months
Input Date: 05/03/2017
Last Updated: 07/17/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Eric Khassanov
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000012YKOAA2&URLSource=cjhunter

Mechanic Technician II

Description:
PDS Tech is seeking several mechanics for positions in Kansas City.
Must have steel toed shoes/boots; all assignments are one year in length
3rd Shift Position
 
 
 
Work may involve used mechanical parts. Aprons & Coveralls are available to contractors; must have steel toed shoes
  
 Operation of Overhead Cranes is involved in this job
Essential Functions / Responsibilities:*Perform disassembly, clean, requalification, rework and assembly operations on Traction Motor Combo component utilizing manual equipment and automated equipment in accordance with manufacturing and quality procedures. Inspect work completed on components to internal inspection criteria for compliance to quality or engineering requirements. Responsible to perform work in a safe manor in support of lean manufacturing principals such as but not limited to 5s or single piece flow to required takt time. In some cases may have to perform special process such as welding or non-destructive testing which will require special process training or certification. Operation of overhead cranes
Basic Qualifications / Requirements:*• Must have high school diploma or GED at a minimum
Knowledge of EHS procedures and policies
• Knowledge of safe use manual equipment and hand tools for assigned product lines.
• Working knowledge of use of inspection measurement equipment
• Understanding of all manufacturing and quality procedures associating assigned product line in a lean manufacturing environment
• Maintain acceptable defect rates
• Successful completion of training requirements
• Where applicable, trained in special processes such as but not limited to welding or non-destructive testing
Desired Qualifications:*• Demonstrate ability to safely complete job tasks utilizing manual or automated equipment as well as use of gages needed for inspection or testing as required
• Demonstrate ability to document and record inspection results per in-house procedures
• Successful completion of quality audit to internal procedures on assigned product line and/or use of equipment



For consideration to this position, please contact Eric Khassanov at ekhassanov@pdstech.com or 843-277-6611.
 

 
Job Number: 1610059718
Job Location: KS City, MO
Duration: 12 months
Input Date: 11/07/2016
Last Updated: 07/17/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Eric Khassanov
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002Fr1dAAC&URLSource=cjhunter

Mechanical 2D and 3D Engineering Checker

Description:
Mechanical 2D and 3D Engineering Checker
Savannah, GA
Rate: $55-$63

Unique Skills:

Required Check 2D engineering data and 3D models for conformance to Company requirements as directed. Check parts for fit, form and function to the extent that information is available. Must have experience in Product Lifecycle Management (PLM) processes and tools, including checking CATIA v5 , SmarTeam, as well as other CAD datasets, in accordance to Company requirements as directed. Checkers are responsible for determining the acceptability of data in the following areas:
• Accuracy and completeness of engineering product definition data, including CAD and PDM data.
• Proper application and compliance with all Engineering and customer drawing requirements.
• Use and understanding of GD & T a must.
• Dimensioning and tolerancing including familiarity with ASME Y14.5.
• Application of best drafting and design practices and procedures.
• Applies extensive and diversified knowledge of industry fabrication practices for aircraft parts.
• Advise Design personnel regarding GAC drawing and design practices and procedures.
• Maintain a current and up-to-date knowledge of developments in the structures/systems design disciplines drawing/data requirements, as well as all interrelated disciplines of design build teams.
• Assist in the research and development of Product Data Management (PDM)/Computer Aided Design (CAD) applications and methodologies for Engineering and when necessary, other departments.
• Actively works to improve daily processes and ensure that all Data Integrity work and CAD and PDM solutions meet customer requirements.
• Knowledge of GAC parts list & PdocM, a plus. Essential Duties and Responsibilities
• Checks designs of complex mechanical aircraft interior furnishing, structures, and/or systems.
• Ensures designs meet customer criteria, quality standards and FAA requirements.
• Adheres to budget and project schedules.
• Provides design guidance and feedback to other engineering personnel.
• Other duties as assigned.
• Knowledge of industry design and documentation standards.
• Experience with mechanical assemblies and manufacturing technique design.
• Ability to work independently and cross-functionally.
• Experience in communicating with employees/teams in productive and efficient manner.
• Strong communication and problem-solving skills.


Education and Experience Requirements:

Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:

Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

Principal Duties and Responsibilities:

Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7821
Job Location: Savannah, GA
Rate: $55-$63
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 03/07/2018
Last Updated: 07/10/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: rex@inconen.com
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Assembler

Description:
Our client, a market leader and technology innovator, is seeking talented professionals to deliver cutting edge solutions to their customers. Well-respected, with a global presence, our client consistently offers a powerful and robust portfolio of products, services and solutions that help customers successfully execute their missions in today’s dynamic environment. With unsurpassed engineering, using an open systems approach, our client solves the nation’s most complex challenges while foreseeing future needs.

Mechanical Assembler
(US Citizenship Required*)
Greensboro, NC
2017-4733

Assemble and inspect complex, high reliability Electro-Mechanical-Optical products from pictorial work instructions, travelers, drawings, and other documentation. Apply mechanical aptitude with attention to detail to achieve quality and productivity objectives. Work with other team members to eliminate manufacturing defects, material scrap, and process inefficiencies.

Work in a manufacturing environment that may include wearing personal protective equipment (such as steel toe shoes, safety glasses, ear plugs, respirator, etc), working with/near and disposal of hazardous material, and recurring lifting (50-75 pounds), standing, bending, squatting, pulling, and pushing.

Responsibilities:
• Perform high reliability assembly using manual tools, fixtures, and process machinery
• Understand and follow manufacturing work instructions and equipment operating procedures
• Safely perform work while wearing personal protective equipment
• Inspect own work, work of peers, and supplied material using various measuring tools
• Document assembly and inspection information on paper forms and in computer systems
• Clean and organize work area on a daily basis
• Perform additional tasks to support the efficient operation of the business

Qualifications:
• Required: Secret Security Clearance
• Active IPC Soldering Certification to any of following: IPC-610, J-STD-001, IPC-7711/7721
• Able to wear Personal Protective Equipment: Safety shoes, safety glasses, ear plugs, hard-hat, gloves, respirator
• Able to work with Hazardous Material: Use and disposal of hazardous chemicals/waste
• Able to do physical work: Lifting (50 – 60 pounds), gripping, standing, bending, squatting, pulling, pushing, and reaching
• Able to be flexible with scheduling: Planned and unplanned overtime may be required

*US Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• High School Diploma or equivalent, and 3-5 years’ experience in a manufacturing environment
• Passing score on the following ACT WorkKeys Assessments:
o Applied Mathematics
o Locating Information
o Reading for Information
o Workplace Observation
• Passing score on the Bennett Mechanical Comprehension Test

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2017-4733
Job Location: Greensboro, NC
Duration: 6 Months
Input Date: 12/01/2017
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Sue Parker
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
Mechanical Design Engineer

Location: Windsor Locks, CT
Rate: $48.25/HR
Duration: 2 year contract
Shift: 1st Shift

**Must be a U.S. Citizen or Permanent Resident**

Job Description:
- The Mechanical Design engineer will be responsible for Mechanical Engineering activities associated with the design, development, and qualification testing of thermal control and environmental life support components and assemblies for various aerospace applications including NASA’s Crew Exploration Vehicle, NASA’s International Space Station as well other aerospace and satellite platforms.
- This is an individual contributor level position.
- Manages teams and multiple projects in research, design, and development of mechanical applications to the planning, design, development, and testing of mechanical and/or electromechanical systems, instruments, controls, engines, and ground test / mechanical tests.
- Additionally responsible for the CAD support of design projects and execution of Engineering design changes.

Requirements:
- Bachelor’s Degree
- 8-15 years’ experience desired.
- The candidate must be a US person.
- Knowledgeable in Pro-E/CREO modeling fundamentals, stress and fatigue analysis, machine design, and material selection.
- Previous experience in aerospace structures and engineering fluid component design required.
- Competence in use of NASTRAN, ANSYS, or simulate stress analysis packages desired.
- Knowledge of drawings, geometric tolerancing, and drawing interpretation.
- Experience with manufacturing techniques for limited production hardware.
- Ability to work within a matrix organization to achieve team and program goals.
- The successful candidate will possess a positive 'can do' attitude, good presentation skills, respect for others, confidence, and patience.
 
Job Number: 8285
Job Location: Windsor Locks, CT
Rate: $48.25/HR
Per Diem: NO
Overtime: Possible
Duration: 2 yr
Input Date: 03/07/2018
Last Updated: 04/13/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer - Level 2

Description:
Location: Orlando, FL
Rate: $55.00 - $65.00/HR
Duration: 1 year contract
Shift: 1st Shift

**MUST be a U.S. Citizen**
**MUST have an Active Secret Clearance or have had one within the last 2 years**

Description:
**MUST have an Active Secret Clearance or have had one within the last two (2) years**
- Work with Mechanical Engineering Lead to assist in the mechanical design, engineering documentation, trade studies, and drawing release for the selected program.
- Verify tolerance analysis on system components has been performed.
- Work with Designer's to ensure the design meets all requirements including Safety of Flight (SOF).
- Additionally, the checker will work with the Liaison Engineer to ensure the work flows in PLM are properly maintained.
- Work closely with Mechanical Engineering to support all program objectives.

Skill/Experience/Education
Mandatory:
**MUST have an Active Secret Clearance or have had one within the last 2 years**
- BS degree in Mechanical Engineering, or equivalent related education and experience.
- Experience with all aspects of mechanical design, including layout, documentation and checking (per IAW ASME Y14.24) and be familiar with MIL-T-3100 and MIL-STD-100.
- Five (5) to ten (10) years experience of creating Pro-E / CATIA drawing and drawing release.
- Proficiency with Pro-E / Windchill is required.
- Knowledge of LMC drawing release procedures is desired.
- Good knowledge of all aspects of Mechanical engineering is essential.
- Previous LMC experience is a plus.
 
Job Number: 7845
Job Location: Orlando, FL
Rate: $55.00 - $65.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 09/28/2017
Last Updated: 02/05/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer - Level 2

Description:
Location: Dallas, TX / Grand Prairie, TX
Rate: $60.00 - $65.00/HR
Duration: 1 year contract
Shift: 1st Shift


**MUST be a U.S. Citizen**
**MUST have an Active Secret Clearance or have had one within the last two (2) years**


Job Description:
- Mechanical Design Engineer to support the Tactical Missiles Advanced Programs (TMAP) area design effort.
- The candidate will work and support the lead design engineer to conduct integration activities, impact to the system, required sub-system/component modifications, and impacts to system performance studies.
- Tasks assigned may include generation of Interface Control Drawings (ICD), generation of Instructional Engineering Release (IER), creation of solid models and drawings, and performing tolerance analyses.
- Tasks will include conceptual and detail design of missile integration concept components, systems, and subsystems, and creation of 3D solid models and 2D drawings.
- Effort will require coordination of design(s) with other mechanical / electrical disciplines, familiarity with missile to aircraft integration concepts, and tolerance analysis.
- Must have Active Secret Clearance at time of submittal, preferably (but not required) within the last 5 years.
- Clearance status on resume required.


Skill/Experience/Education
Mandatory: (MUST BE SHOWN ON RESUME)
**MUST have an Active Secret Clearance or have had one within the last two (2) years**
- Candidate should have a Bachelors of Science degree in Mechanical Engineering, or 10 years of equivalent experience, and 6-8 years of Computer Aided Design software experience using PRO Engineer / CREO 3.
- Candidate must be capable of creating and interpreting detail, assembly, and installation type drawings, knowledge of Geometric Dimensioning and Tolerancing, and experience with manufacturing engineering and fabrication processes.
- Familiarity with Microsoft Office applications is desired.
 
Job Number: 7915
Job Location: Savannah, GA
Rate: $60.00 - $65.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 09/28/2017
Last Updated: 02/05/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Modeler/Drafter

Description:
Mechanical Design Modeler/Drafter

Location: Denver, CO
Rate: DOE
Duration: 1 year contract

Work Description:
- 5+ years’ experience
- Must be fluent with mechanical design utilizing CREO
- Strong at generate engineering drawings
- Proficient at modeling structural and mechanical system
- Knowledge of machine shop practices, capabilities, accuracies and limitations
- Experience with GD&T a plus
- Familiar with welding process a plus
- Knowledge of Siemens Team Center design release process a plus
 
Job Number: 8169
Job Location: Denver, CO
Rate: DOE
Per Diem: Split Possible
Overtime: Exempt
Duration: 1 yr
Start Date: ASAP
Input Date: 11/02/2017
Last Updated: 02/14/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer

Description:
No clearance - must be a US Citizen

Mechanical Design Engineer to support the Tactical Missiles or Air Missile Defense Line of Business Area Development or Production Program Mechanical Design effort. For development program efforts, the candidate will perform conceptual and detail design of hardware system and subsystem components, create/release drawings, support design reviews, and support supplier/customer meetings. The engineer must be proficient in Pro-E/CREO; have good communication skills, and be able to work with internal and external customers. Tasks assigned may include generation of Interface Control Drawings (ICD), generation of Instructional Engineering Release (IER), creation of solid models and drawings, and performing tolerance analyses.
 
Job Number: 41177
Job Location: TX
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 11/30/2017
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

Mechanical Engineer

Description:

PDS Tech, Inc. is seeking a Mechanical Engineer for a position located in Kansas City, MO. 
Must hold an active clearance (preferably a DOE Q, or could be a DOD TS).

The Client's organization has several open opportunities for Mechanical Engineers.  We are seeking engineers who are interested in supporting one or more of the following areas:  product engineering, process engineering, purchased product engineering, systems engineering and mechanical testing.  Job title will be commiserate with level of experience. 

 
  • Completes assignments and provides detailed instructions in the design and/or project management of new and current projects, products, programs, components, tools and acceptance equipment under technical guidance of higher level engineers or departmental management
  • Participates in establishing operating procedures on new products and components
  • Assists in the development of test procedures and performance of routine to moderately complex engineering evaluation tests, product and process capability studies, quality audits, product or project data reviews, and other engineering evaluation work
  • Evaluates opportunities for defect prevention based on standard or accepted solutions
  • Prepares evaluation reports, analyzes discrepancies, and makes recommendations for product, test equipment, procedures and manufacturing or operating processes that improve productivity and quality and reduce flowtime
  • Assists in the preparation of product or project definitions, manufacturing drawings and specifications, and test equipment designs
  • Defines and acquires tooling, gaging and other equipment necessary to manufacture parts and to assure product quality
  • Interacts with design agencies, suppliers and/or internal organizations such as the Integrated Supply Chain to assist in resolving design, development, production and acceptance issues
  • Provides technical assistance in appropriate assigned field
  • Evaluates and makes recommendations regarding technological advances that improve productivity and quality,reduce flowtime, and enhance operational surety
  • May perform other duties as required
  • Conducts activities in a safe and healthy manner and works in accordance with established ES&H requirements to ensure the protection of associates, the public, and the environment. Takes actions necessary to stop work when an unsafe condition or action is identified. Every employee has the right and responsibility to stop work when unsafe conditions or actions are identified.

Basic Qualifications: 
  • US citizenship in order to obtain and maintain US Dept of Energy "Q" level security clearance.
  • Bachelor of Science degree in Mechanical Engineering from an ABET accredited program or an equivalent ABET accredited engineering degree.
  • Minimum three (3) years of professional technical experience.
  • Proficiency in Microsoft Excel, Word and PowerPoint required

Additional Qualifications: 

  • Hands-on experience with 3D design software like Creo or SolidWorks
  • Effective verbal, written and presentation skills
  • Knowledge of continuous improvement methodologies including Six Sigma
  • Previous experience in a manufacturing environment
  • Experience in engineering related administrative activities such as configuration management, financial reporting, product testing procedures & data entry preferred
  • Proven ability in decision making and organization, planning and problem solving skills
  • Ability to work under minimal supervision, with latitude for independent action and decision making.
  • Good people skills, ability to motivate teams to produce on-target and timely results.
  • Demonstrate project/program management via multiple priorities/projects
  • Ability to plan and organize, demonstrate excellent time management and support several projects at once
  • Willingness to travel on occasion

 
Job Number: 1710068729
Job Location: KS City, MO
Duration: 6 months
Input Date: 05/26/2017
Last Updated: 07/17/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Tanya James
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002JrH0AAK&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer - Entry Level

Description:
Job Title: Mechanical Engineer I
Location: Portland, OR 97217
Duration: 24 Months
Job Functions:
• The main function of this role is to provide a technical interface between Product Engineering and the Manufacturing Development Center.
• Position at MDC is at center of campus and get to work on all new designs 3-5 years ahead of production. Can also get to see the products get physically built and designs evolve. The work feeds directly into making these things more “manfucturable” and profitable. Work is enjoyable because you get to work with different groups in order to complete the projects at hand. Will also gain multiple perspectives and how it impacts different areas within the Organization. Good exposure to the company.

Essential Duties and Responsibilities:
• Interface with Product Engineering on designs for new Product Projects:
 Secure emerging design information from Product Engineering
 Understand difference between B/C/D sample level designs
 Ensure compatible maturity levels of parts used in Mockup / PoD
• Procure parts and assemblies required for Mockup / PoD:
 Provide data to suppliers for rapid prototypes
 Provide guidance to MDC Technicians procuring / fabricating prototype parts
• Problem Solving
 Assist MDC Technicians with problem identification, documentation, and resolution related to new product projects

Required background experience and skills:
• BS degree in electrical, mechanical, or manufacturing engineering, or commensurate work experience.
• 0-2 years of experience in product engineering design areas required.
• Creativity, verbal and written communication skills, analytical and problem solving ability.
• Team player and detail oriented.
• Ability to read engineering drawings and common computations.
• Siemens NX experience preferred, but CAD experience is okay.
 
Job Number: 4462
Job Location: Portland, ORE
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 24 Months
Start Date: ASAP
Input Date: 12/06/2017
Firm Name: OLSA RESOURCES INC
Attention: Sarabjit
Address: 3836 N BALLAST ST
City, State: PORTLAND, OR 97217
Phone: 503/608-7895
Fax Phone: 503/608-7896
Website: www.olsaresources.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer - Level 2

Description:
Location: Orlando, FL
Rate: $50.00 - $60.00/HR
Duration: 1 year contract
Shift: 1st Shift

**MUST be a U.S. Citizen**
**MUST have an Active Secret Clearance or have had one within the last 2 years**

Job Description:
**MUST have an Active Secret Clearance or have had one within the last two (2) years**
- Selected candidate will perform all Liaison duties for the program.
- Candidate will closely interact with the Engineering team to ensure all required data is available for new drawing release and document revisions, interact with other functions like manufacturing, and subcontracts to process change requests, set up the Liaison process, track open items via page and line. - Selected individual must be proficient in the use of Windchill, Creo and Catia, have excellent verbal, presentation and written skills and be able to work with a diverse team of internal and external customers/suppliers.

Skill/Experience/Education
Mandatory:
**MUST have an Active Secret Clearance or have had one within the last two (2) years**
- BS degree in Mechanical Engineering, or equivalent related education and experience.
- CAD expertise per job description (Windchill, CREO and Catia).
- Knowledge of LMC drawing practices is desired, and previous LMC experience is a plus.
 
Job Number: 7844
Job Location: Orlando, FL
Rate: $50.00 - $60.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 09/05/2017
Last Updated: 02/05/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer - Level 3

Description:
Mechanical Engineer - Level 3 (ACTIVE DoD SECRET CLEARANCE REQUIRED)

Location: Lexington, KY
Pay Rate: DOE ($35/hr - $45/hr)
Duration: 9 month W2 contract
Shift: First, 5/40, OT
**MUST be a U.S. CITIZEN**
**MUST have an ACTIVE DoD SECRET CLEARANCE**

Description
The position will require the individual to hold a major contributing role within the overall Engineering organization; as such they will be expected to prepare and present materials for peer reviews, design reviews, DFM discussion, and group discussions on technical aspects of the design.
The Engineer will be expected to lead the design effort for system sub-assemblies or potentially for small self-contained systems. The designs will comply with applicable military specifications, SAE, ANSI, ASME, and other related design and drafting standards.
The individual will be expected to work cross functionally within the Engineering organization as well as across the company. Ongoing job responsibilities include:
• Designs components and assemblies using commodities including sheet metal & machined components
• Provides technical experience for design and manufacturing related matters
• Mechanical design and associated program deliverables on subassemblies or small self-contained systems
• Design and release drawings to meet internal and external commitments.
• Updates on project progress and roadblocks.
• Provide input to System Engineer for design specifications for components, assembled parts and equipment for design validation.
• Demonstrate manufacturing feasibility and technical justification for selected design approach
• Support product lifecycle management ushering a product from concept through production implementation.

Skill/Experience/Education (Mandatory):
ACTIVE DoD SECRET CLEARANCE
CATIA V5 – (4+ years required)
MS Office Suite expertise – (4+ years required)

Desired:
TeamCenter Engineering experience
C130 Familiarity
JobScope /IT reports experience
 
Job Number: 8326
Job Location: Lexington, KY
Rate: 35.00-45.00
Per Diem: Split Possible
Overtime: Possible
Duration: 9 mos
Start Date: ASAP
Input Date: 01/18/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Mechanical Engineer - Level 3 - FL - C

Description:
Chipton-Ross is seeking a Mechanical Engineer - Level 3 for an opening in Fort Walton Beach, FL.

RESPONSIBILITIES:
The position will require the individual to hold a major contributing role within the overall Engineering organization; as such they will be expected to prepare and present materials for peer reviews, design reviews, DFM discussion, and group discussions on technical aspects of the design. The Engineer will be expected to lead the design effort for system sub-assemblies or potentially for small self-contained systems. The designs will comply with applicable military specifications, SAE, ANSI, ASME, and other related design and drafting standards. The individual will be expected to work cross functionally within the Engineering organization as well as across the company.
Ongoing job responsibilities include:
o Designs components and assemblies using commodities including sheet metal & machined components
o Provides technical experience for design and manufacturing related matters
o Mechanical design and associated program deliverables on subassemblies or small self-contained systems
o Design and release drawings to meet internal and external commitments.
o Updates on project progress and roadblocks.
o Provide input to System Engineer for design specifications for components, assembled parts and equipment for design validation.
o Demonstrate manufacturing feasibility and technical justification for selected design approach
o Support product lifecycle management ushering a product from concept through production implementation.

REQUIRED EXPERIENCE:
-CATIA V5
-MS Office Suite expertize

PREFERRED EXPERIENCE:
-TeamCenter Engineering experience
-C130 Familiarity
-JobScope /IT reports experience

EDUCATION:
Bachelor's Degree

WORK HOURS:
5/40, 1st Shift, Full-Time


MISCELLANEOUS: Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

 
Job Number: 164393
Job Location: Fort Walton Beach, FL
Rate: $35 to $45.00 DOE
Duration: 12 Months
Input Date: 07/24/2017
Last Updated: 07/17/2018
Firm Name: CHIPTON ROSS
Attention: Christopher Long
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: clong@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer and 2D/3D Checking Engineering Contractor

Description:
UNIQUE SKILLS
Ideal Candidates will have mechanical engineering and 2D/3D checking experience with Aircraft Cabin Interiors and Systems to include but not limited to: - Seats - Galley - Lavs - LRU installations - Liners - Water System - Waste System - Mechanism design and validation - Prototype development Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs. in the specific technical discipline or 10 yrs. broad engineering experience in several technical disciplines with Bachelors, or 3 yrs. in the specific technical discipline with Masters, or 1 yr. in the specific technical discipline with PhD.

ESSENTIAL FUNCTIONS
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area.

OTHER REQUIREMENTS
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 17-723-102180
Job Location: Southeast
Rate: $58.00 to $63.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 02/28/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer with active Secret Clearance / Catia V5 CA

Description:
160781

Requirement#AERO-REQ-0722
Work LocationPalmdale, CA
Work Week9/80-A
PriorityHigh
Needed Date01/02/2018
End Date12/21/2018
Number of Resources1
Security Clearance Secret (Prime Contract:re-investigation within the past 5 years (P-29 )

Title Mechanical Engineer-N
Description
This position is for a mechanism and landing gear design engineer. A successful candidate will have a complete understanding of the principles and techniques of aircraft mechanisms, landing gear and structural design. The candidate will coordinate efforts across a wide range of functional organizations, such as Quality Assurance, Planning, Tooling, Structural Analysis, Materials & Processes, Flight Sciences, Test and Manufacturing. Responsibilities for this position include: • Create and maintain 3-D CATIA models, assemblies and installations, system requirements, interface/supplier control drawings, performance specifications, system checkout procedures and statements of work. • Create system requirements, trade studies, sub-component and flight test plans. • Coordinate with suppliers, internal and external integrated product teams. • Provide manufacturing, component test and ground/flight test support. • May function in a project leadership role managing the system performance, budget and schedule. Must be a US Citizen. This position is located at a facility that requires special access.
Skill/Experience/Education
Mandatory:

• Must have a secret clearance with an investigation within the last 5 years to start. • Proficient with CATIA V5. • Experience in mechanism design • Experience in structural design
Desired:

• Bachelor’s Degree in an Engineering Discipline with 5 years of experience or Master's Degree in an Engineering Discipline with 3 years of experience Experience with GD&T (Geometric Dimensioning and Tolerancing)
• Experience with hand stress analysis
• Excellent writing and communication skills

Skill Matrix
Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory(Yes/No)
Catia V5 Proficient 4-5 Years Yes
Structural Design Proficient with aircraft structural design of composite and metallic part 4-5 Years Yes


Interview RequiredYes

Shift1st Shift

OT AllowedYes (#hours allowed: 20, Pre-Approval Reqd.:Yes)
TravelNo
Exempt/Non-ExemptNon-Exempt
Rate TypePer Hour
Rates
0-4 YrsPay Rate: 65.00 USD
5-8 YrsPay Rate: 70.00 USD
9+ YrsPay Rate: 75.00 USD
 
Job Number: JE-0722
Job Location: Palmdale, CA
Rate: 65-75hr DOE
Duration: 12 month contract
Input Date: 01/02/2018
Last Updated: 01/03/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Mechanical Engineers

Description:
3D CAD, FEA a plus
 
Job Location: Southeast
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: annmarie@advancedtechno.com
Website: www.advancedtechno.com

Mechanical Engineers

Description:
3D CAD, FEA a plus
 
Job Location: Midwest
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: annmarie@advancedtechno.com
Website: www.advancedtechno.com

Mechanical Engineers

Description:
With sustaining experience
 
Job Location: Midwest
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: annmarie@advancedtechno.com
Website: www.advancedtechno.com

Mechanical Engineers BSME -- Pro/E

Description:
2000 hours Pro/E
 
Job Location: CT/IN/FL/OR
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: davellino@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Ground Support Equipment Designer

Description:
Mechanical Ground Support Equipment Designer

Location: 1 in Denver, CO
Location: 2 in Decatur AL
Pay Rate: DOE
Duration: 1 year W2 contract
Shift: First, exempt OT
**MUST be a U.S. CITIZEN**

Work Description:
- Bachelor's degree or higher required
- 5-10+ years’ experience required
--- Must be fluent with mechanical design utilizing CREO, required
--- Strong at generate engineering drawings, required
--- Proficient with structural design and mechanisms, required
--- Must be familiar with basic fluid system components such as hoses, tubing, pipe routing and fluid system hardware, required
- Knowledge of machine shop practices, capabilities, accuracies and limitations
- Familiar with welding process
- Experience with GD&T a plus
- Knowledge of Siemens Team Center design release process a plus
 
Job Number: 8361
Job Location: Decatur, AL
Rate: DOE
Per Diem: Split Possible
Overtime: Exempt
Duration: 1 year
Start Date: ASAP
Input Date: 12/05/2017
Last Updated: 02/14/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Ground Support Equipment Designer

Description:
Mechanical Ground Support Equipment Designer

Location: Denver, CO
Pay Rate: DOE
Duration: 1 year W2 contract
Shift: First, exempt OT
**MUST be a U.S. CITIZEN**

Work Description:
- Bachelor's degree or higher required
- 5-10+ years’ experience required
--- Must be fluent with mechanical design utilizing CREO, required
--- Strong at generate engineering drawings, required
--- Proficient with structural design and mechanisms, required
--- Must be familiar with basic fluid system components such as hoses, tubing, pipe routing and fluid system hardware, required
- Knowledge of machine shop practices, capabilities, accuracies and limitations
- Familiar with welding process
- Experience with GD&T a plus
- Knowledge of Siemens Team Center design release process a plus
 
Job Number: 8167
Job Location: Denver, CO
Rate: DOE
Per Diem: Split Possible
Overtime: Exempt
Duration: 1 year
Start Date: ASAP
Input Date: 03/12/2018
Last Updated: 03/14/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical System Design & Analysis Engineer 3

Description:
Mechanical System Design & Analysis Engineer 3

Location: Ridley Park, PA
Duration: 12 months

Skill Code: 62D-Hydraulic Sys, Actuation & Cnt

Description:
Supports the development and documentation of mechanical and fluid system and thermal environment requirements to establish the system design. Supports the development, maintenance or modification of system, component and installation designs/proposals to provide design documentation to downstream groups. Performs and documents analyses to validate and verify systems and components meet requirements and specifications. Contributes to supplier development, test and production activities and directs the supplier to optimize integration and achieve program goals. Supports system components'' designs/proposals standards to provide installation and detail documentation. Trains others. Works under general direction. Additionally, Develops, integrates and documents mechanical and fluid system and thermal environment requirements to establish the system design. Develops, maintains, or modifies mechanical and fluid system, component and installation designs, using 3-D Computer Aided Engineering tools and/or other design methods, to provide product definition to other engineering groups, production operations, suppliers and external customers throughout the product lifecycle. Performs, integrates and documents mechanical, fluid and thermal analyses and test results to validate and verify systems and components meet requirements and specifications. Manages supplier development, test and production activities and coordinates with the supplier to optimize the design and achieve program goals. Develops new design/analysis processes and tools to improve effectiveness, quality and efficiency of the development effort. Investigates emerging technologies to develop concepts for future product designs to meet projected requirements.

Education / Experience:
Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Additionally, Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard. Education Requirement is Mandatory.

Degree and typical experience in engineering classification: Bachelor's and 5 or more years' experience, Master's degree with 3 or more years' experience or PhD degree with experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

For client, IF within an Engineer Job Code, Title: engineer, client will require a minimum of a BS in either Mechanical Engineering, Civil Engineering or Aero/Astronautically Engineering or relayed discipline. Job Req may be more specific. (read job req for clarification)

IF INTERESTED THEN PLEASE SHARE UPDATED RESUME AT RAVI@ICONMA.COM
 
Job Number: 17-20052
Job Location: Ridley Park,, PA
Input Date: 12/01/2017
Last Updated: 12/26/2017
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 1201 PACIFIC AVE STE 600
City, State: TACOMA, WA 98402
Phone: 253/213-2012
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical System Design & Analysis Engineer 3

Description:
Mechanical System Design & Analysis Engineer 3
 
Location: Ridley Park, PA
Duration: 1 year
 
Job Description:        
Supports the development and documentation of mechanical and fluid system and thermal environment requirements to establish the system design. Supports the development, maintenance or modification of system, component and installation designs/proposals to provide design documentation to downstream groups. Performs and documents analyses to validate and verify systems and components meet requirements and specifications. Contributes to supplier development, test and production activities and directs the supplier to optimize integration and achieve program goals. Supports system components'' designs/proposals standards to provide installation and detail documentation. Trains others. Works under general direction. Additionally. Develops, integrates and documents mechanical and fluid system and thermal environment requirements to establish the system design. Develops, maintains, or modifies mechanical and fluid system, component and installation designs, using 3-D Computer Aided Engineering tools and/or other design methods, to provide product definition to other engineering groups, production operations, suppliers and external customers throughout the product lifecycle. Performs, integrates and documents mechanical, fluid and thermal analyses and test results to validate and verify systems and components meet requirements and specifications. Manages supplier development, test and production activities and coordinates with the supplier to optimize the design and achieve program goals. Develops new design/analysis processes and tools to improve effectiveness, quality and efficiency of the development effort. Investigates emerging technologies to develop concepts for future product designs to meet projected requirements. Additionally. Thermal Analysis experience including hand calculation and software required. Thermal Desktop and/or JENA experience preferred.
 
Skill Code:
686-Envir Control & Thermal Analys
 
Education / Experience:         
Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Additionally...Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.
 
Job Description:
Develops, integrates and documents mechanical and fluid system and thermal environment requirements to establish the system design. Develops, maintains, or modifies mechanical and fluid system, component and installation designs, using 3-D Computer Aided Engineering tools and/or other design methods, to provide product definition to other engineering groups, production operations, suppliers and external customers throughout the product lifecycle. Performs, integrates and documents mechanical, fluid and thermal analyses and test results to validate and verify systems and components meet requirements and specifications. Manages supplier development, test and production activities and coordinates with the supplier to optimize the design and achieve program goals. Develops new design/analysis processes and tools to improve effectiveness, quality and efficiency of the development effort. Investigates emerging technologies to develop concepts for future product designs to meet projected requirements.
 
Education/Experience:
Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation
'Thermal Analysis experience including hand calculation and software required. Thermal Desktop and/or JENA experience preferred.” 
Supplier due diligence required - Refer to supplier guidelines concerning education requirements ENG reqs on Supplier sharepoint
 
Education requirements: Client will require a minimum of a BS in either Mechanical Engineering, Civil Engineering or Aero/Astronautically Engineering or related discipline.
 
If interested then please share updated resume at ravi@iconma.com
 
Job Number: 17-20172
Job Location: Ridley Park,, PA
Input Date: 11/30/2017
Last Updated: 12/26/2017
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 1201 PACIFIC AVE STE 600
City, State: TACOMA, WA 98402
Phone: 253/213-2012
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical System Design & Analysis Engineer III - (PA)

Description:
Supports the development and documentation of mechanical and fluid system and thermal environment requirements to establish the system design. Supports the development, maintenance or modification of system, component and installation designs/proposals to provide design documentation to downstream groups. Performs and documents analyses to validate and verify systems and components meet requirements and specifications. Contributes to supplier development, test and production activities and directs the supplier to optimize integration and achieve program goals. Supports system components'' designs/proposals standards to provide installation and detail documentation. Trains others. Works under general direction. Additionally...Develops, integrates and documents mechanical and fluid system and thermal environment requirements to establish the system design. Develops, maintains, or modifies mechanical and fluid system, component and installation designs, using 3-D Computer Aided Engineering tools and/or other design methods, to provide product definition to other engineering groups, production operations, suppliers and external customers throughout the product lifecycle. Performs, integrates and documents mechanical, fluid and thermal analyses and test results to validate and verify systems and components meet requirements and specifications. Manages supplier development, test and production activities and coordinates with the supplier to optimize the design and achieve program goals. Develops new design/analysis processes and tools to improve effectiveness, quality and efficiency of the development effort. Investigates emerging technologies to develop concepts for future product designs to meet projected requirements.

Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Additionally...Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard. Education Requirement is Mandatory.
 
Job Number: MechEngIIIPA
Job Location: Ridley Park, PA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/28/2017
Last Updated: 01/05/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical System Design & Analysis Engineer IV - (MO) - Unigraphics

Description:
Leads and provides technical quality review of the development and documentation of mechanical and fluid systems and thermal environment to establish the system design. Leads activities to validate and verify mechanical and fluid systems requirements. Leads the development, maintenance or modification of system components'' designs/proposals to provide installation and detail documentation. Performs and documents analyses. Manages supplier development, test and production activities and directs the supplier to optimize integration and achieve program goals. Prioritizes, delegates and tracks performance and documentation of analyses of mechanisms/landing gear/ordnance components and systems selecting appropriate methods to validate or assess the design. Supports proposal preparation and new business development efforts. Trains and coaches others. UNIGRAPHICS NX

Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

ACS Group (formerly 'Comforce')
 
Job Number: MechEngMO
Job Location: Hazelwood, MO
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 12+ Months
Start Date: ASAP
Input Date: 01/10/2018
Last Updated: 03/09/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Systems Design & Analysis Engineer III - MO

Description:
SEVERAL OPENINGS IN THE ST. LOUIS, MO AREA

Active Secret Clearance, NOT REQUIRED to start.

Perform independently Air Vehicle Systems engineering tasks to sustain the fielded tactical weapons systems.
Design and apply engineering principles to mechanical systems and/or propulsion engineering.
Conduct retrofit/redesigns, system integration, and system troubleshooting for multiple hardware / software subsystems.
Perform product investigations on the fielded subsystems, completing failure/trend analysis on system hardware / software, and supporting qualification / fielding of product redesigns.
Interface directly with supplier and customer to communicate results of analysis and support issue resolution.
Work under general guidance of senior engineering and management to develop recommendations on improvements to the fielded systems / subsystems.
Work cross-functionally on a wide variety of technical issues.

Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.

CATIA V5, Enovia
 
Job Number: MechEngMO
Job Location: Berkeley, MO
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 11/15/2017
Last Updated: 12/18/2017
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Systems Design & Analysis Engineers 3

Description:
Seeking Mechanical Systems Design & Analysis Engineers 3


Description:
Chipton-Ross is seeking 2 Mechanical Systems Design & Analysis Engineers 3 located in Ridley Park, PA

RESPONSIBILITIES:
Supports the development and documentation of mechanical and fluid system and thermal environment requirements to establish the system design. Supports the development, maintenance or modification of system, component and installation designs/proposals to provide design documentation to downstream groups. Performs and documents analyses to validate and verify systems and components meet requirements and specifications. Contributes to supplier development, test and production activities and directs the supplier to optimize integration and achieve program goals. Supports system components'' designs/proposals standards to provide installation and detail documentation. Trains others. Works under general direction. Additionally...Develops, integrates and documents mechanical and fluid system and thermal environment requirements to establish the system design. Develops, maintains, or modifies mechanical and fluid system, component and installation designs, using 3-D Computer Aided Engineering tools and/or other design methods, to provide product definition to other engineering groups, production operations, suppliers and external customers throughout the product lifecycle. Performs, integrates and documents mechanical, fluid and thermal analyses and test results to validate and verify systems and components meet requirements and specifications. Manages supplier development, test and production activities and coordinates with the supplier to optimize the design and achieve program goals. Develops new design/analysis processes and tools to improve effectiveness, quality and efficiency of the development effort. Investigates emerging technologies to develop concepts for future product designs to meet projected requirements.

EDUCATION:
Accredited Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Additionally...Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

FULL TIME/FIRST SHIFT
WORK HOURS: 8:00 AM - 5:00 PM
 
Job Number: 166633
Job Location: Ridley Park, PA
Rate: $57.75/hr
Per Diem: Yes
Overtime: Yes
Duration: 12 mths.
Start Date: ASAP
Input Date: 11/30/2017
Firm Name: CHIPTON ROSS
Attention: Melody Mullins
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Systems Designer

Description:
Design Engineer responsible to support the conceptual design and production engineering of Aircraft Mechanical Systems. The candidate will be responsible for conceptual definition, detailed design and 2D drafting of new and modified design.

Duties and Responsibilities:
1. Generates Engineering Models and Drawings utilizing CATIA Version 5.
2. Performs trade studies to identify optimal engineering solutions.
3. Collaborates with the Integrated Product Team to resolve cross functional issues.
4. Implements Industry best engineering practices (design for manufacturing, design for reliability and design for maintainability).
5. Implement design solutions optimized for cost and weight.
6. Manages task execution to ensure on-time and on-target completion.
7. Perform tolerance and deviation studies. Define detail parts dimensional requirements to meet final assembly and installation requirements.
8. Utilizes drafting and Geometrical Dimensioning &Tolerancing knowledge to optimize part design for cost and functionality.
9. Searches for problem root cause and develop corrective action plans and solutions.
10. Participates in design / development reviews with management and internal customers. The candidate must have the ability to deliver technical presentations effectively to a diverse and demanding audience.

Education, Work Experience, Certification and/or Licensure:
1. BS in Mechanical Engineering with 0-10 years directly related experience
a. OR MS / MBA with 0-5 years of experience
2. Some Travel will be required

Knowledge, Skills and Abilities:
1. Proficient in use of CATIA Version 5.
2. Functional knowledge of drafting rules.
3. Functional knowledge of Geometrical Dimensioning and Tolerancing.
4. Proficient in Microsoft Office Products.
5. Familiar with FAR Part 23 or Part 25.
 
Job Number: 28-012
Job Location: Greensboro, NC
Rate: $38 to $62
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 09/25/2017
Last Updated: 01/23/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Systems MRB Engineer

Description:
Unique Skills:
Ideal candidate will have previous experience with Engineering MRB, trouble shooting, disposition and repair of aircraft defects, return to service requirements, and/or flight squawk support, while working in an environment like a Production Facility, Flight Test, a Service Center, or Outside Operational Support. Systems design and/or qualification experience is a plus. A skilled Mechanical Systems Engineer that is familiar with aircraft systems (including but not limited to): Landing Gear, Power Plant/ECS, Hydraulics, Flight Controls, Doors, Waste & Water, O2, Equipment installation, Secondary Structure.

Education and Experience Requirements:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of products and services

Principal Duties and Responsibilities:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
 
Job Number: 24-143
Job Location: Savanah, GA
Rate: $59 - $62
Per Diem: YES
Overtime: YES
Duration: 1 YR+
Start Date: ASAP
Input Date: 02/22/2018
Last Updated: 06/22/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

Mechanical Systems MRB Engineer, Production & Test Aircraft Support (TS II)

Description:
Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Company products and services

Essential Functions:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
Unique Skills:
Ideal candidate will have previous experience with Engineering MRB, trouble shooting, disposition and repair of aircraft defects, return to service requirements, and/or flight squawk support, while working in an environment like a Production Facility, Flight Test, a Service Center, or Outside Operational Support. Strong design background and/or qualification experience is a plus. A skilled Mechanical Systems Engineer that is familiar with aircraft systems (including but not limited to): Power Plant/ECS, Landing Gear, Hydraulics, Flight Controls, Doors, Waste & Water, O2, Equipment installation, Secondary Structure.

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.
 
Job Number: 372583
Job Location: Savannah, GA
Rate: TBD
Duration: 12 - months
Start Date: ASAP
Input Date: 10/04/2017
Last Updated: 07/17/2018
Firm Name: CTS INTERNATIONAL
Address: 11100 NE 8TH ST STE 800
City, State: BELLEVUE, WA 98004
Phone: 425/646-2688
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com