Job Search Results

536 listings were found that matched your search words: Keywords: Aircraft ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2018/11/14 Wednesday 09:25AM Pacific Time by ContractJobHunter. )

Listings 1 - 536

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2304 - AVIONICS SYSTEMS ENGINEER - cv. word doc only

Description:
Support of Compliance to Certification Authority; author Certification Plans

Provide specialist advice relating to test methods and procedures

Review testing readiness and conformities of assigned systems

Review qualification, ground and flight test data of assigned systems

Review flight test reports containing data demonstrating proper system operation as required by Certification Authorities Regulations

Review and Sign flight release documentation (including safety of flight judgments)

Review system performance analysis to ensure proper compliance to regulations

Coordinate with other Certification Authority Delegates for integrated functions (ie, Human Factor, Pilots, et al)

May provide technical leadership to a small engineering team for dedicated technical investigation / test.

Bachelor's degree in Avionics / Electrical/ Aerospace Engineering, plus 12-15 years' experience in Avionics systems design and certification.

Able to obtain a Certification Authority Delegation for assigned systems

Working knowledge of Rockwell Collins Proline 21 or Fusion Avionics Systems would be advantageous.

Must have excellent communication skills in English - both written and oral and be PC literate.

Experience in flight-testing of civil aircraft; and knowledge of TCCA, FAA, and EASA certification requirements (ie, FAA CFR Part 25) required.

Mirabel is just outside Montreal, Canada.
 
Job Number: 2304
Job Location: Montreal/Mirabel, Canada
Rate: $63.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 12/03/2017
Last Updated: 04/11/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2309 - PROGRAM ANALYST - cv, word doc only

Description:
Define PMO governances & meeting agenda, prepare necessary content (strategy, proposed schedule, business case, etc.) with all key stakeholders to accelerate decision making, communicate minutes of meeting, and follow-up on actions.

Lead projects within the Program Office organization in accordance with various elements of change or program decisions which impact the Final Line baseline activities and schedule.

Establish project schedule and drive the team toward defined milestones.

Lead or facilitate project governances, integration, communication, evaluation and execution reviews, approvals and eventually implementation into design and product with internal and external stakeholders.

Identify risks associated with schedule/milestone adherence and provide visibility on the mitigation plan.

Provide support and prioritization to Technical Focals/ Project Focals/Logistics Focals and Supplier Readiness teams

Identify gaps, monitor and propose improvements to supplier performance with supplier readiness team.

Provide visibility on supplier performance shortfalls and work with key stakeholders to neutralize gap.

Have a bachelor's degree in Engineering or Project Management or a DEC in aeronautics or at least five (5) years of experience in aeronautics.

Have relevant technical experience in interior completion on Global Platform and knowledge of certification requirements, Aircraft systems and interiors.

Have knowledge in Project Management.

Have experience in the manufacturing industry (an asset).

Are proficient with Microsoft Office Suite (Word, Excel, PowerPoint, and Project).

Have a good interpersonal, leadership & communication skills.

Are customer-oriented and innovative in problem solving.

Show an open mind and a great ability to work as a team player.

Must have a sense of organization, time management and you demonstrate autonomy.

You drive for results.

Knowledge of aircraft structures, systems or interiors will be considered an asset.

Ideal candidate is someone that has already worked on the Global program with knowledge of SAP and BDI, BDM, MBOM.

Bilingual (English & French).
 
Job Number: 2309
Job Location: Montreal, Canada
Rate: 52.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 12/15/2017
Last Updated: 03/22/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2312 - PROGRAM SPECIALIST - cv, word doc only

Description:
Participate at Change Board; identify and track changes that have the potential to impact customers post-delivery.

Work with multi-disciplinary teams to quantify program and
customer impacts from these changes and develop a decision matrix to assist with related Change Board decisions.

Determine a means to prioritize and mitigate these impacts; develop mitigation plans and track them to closure.

Lead a governance process that thoroughly vets and approves changes with proposed harmonization post-delivery; and serves as an escalation channel to senior leadership.

Bachelor Degree in Engineering and at least eight (8) years of relevant work experience in the aerospace industry; specific experience in change management and/or program management is an asset.

Varied experience across multiple functions in new aircraft development programs and in particular during the Type Certification and EIS phases.

Demonstrate excellent communication skills in both English and French.

Are self-motivating and can work autonomously.

Possess strong project management skills.

Are familiar with applications such as Microsoft Project, Word, Excel, PowerPoint and Outlook.
 
Job Number: 2312
Job Location: Montreal, Canada
Rate: 56.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 6+ Mths
Start Date: ASAP
Input Date: 12/19/2017
Last Updated: 07/17/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2317 - HYDRO-MECHANICAL SYS. INTEGRATOR - cv - word doc

Description:
Support the Global 7000/8000 Mod-line in Montreal by leading all engineering related activities for a timely resolution to production line issues.

Witness system functional testing and conduct technical investigations on Hydro-Mechanical systems related issues, analyze and develop solutions/recommendations and reports.

Disposition RFCs, RNCs, and Supplement 2s as required.

Review functional test requirements and ensure translation into mature functional tests.

Track and ensure successful implementation of systems installations and modifications.

Work with the product development team to assist with technical proposal activities, including preparation of written material and presentations.

Recommend and review design changes.

Develop good working relationships with various departments within the company and with all suppliers.

Bachelor of Engineering Degree and eligibility for Professional Engineer registration.

15 years' experience in aircraft Hydro-Mechanical systems (Fly-By-Wire & Control Surfaces, Wing High Lift, Hydraulics, Landing Gear, Brakes, etc).

Must have previous experience with fly by wire, wing high-lift or hydraulic systems on Commercial or Business Aircraft.

Experience in providing engineering support to a Final Line/ Production.

Must have experience in the definition and certification of at least one complex aircraft control system.

Flight Controls/FBW experience would be an asset.

Must have a good understanding of all facets of system definition, integration, and certification and have a good knowledge of aircraft systems and interfaces (e.g., electrical, Hydraulic , Avionics, Auto-Flight, Flight Controls) integration, testing and installation.

Conversant with design, qualification and certification test requirements of Hydro-Mechanical systems.

Familiar with Part 25 certification requirements and advisory material.

Possess strong integration skills, in both system partner management and system technical integration.
 
Job Number: 2317
Job Location: Montreal, Canada
Rate: 64.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 01/08/2018
Last Updated: 04/11/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2320 - PROCESS ASSURANCE ENGINEER - cv - word doc only

Description:
Support the development and maintenance of process assurance plan(s).

Support the definition and development of the Bombardier Process Assurance processes, checklists and deliverables.

Plan, coordinate and participate in internal and supplier process assurance oversight activities.

Generate process assurance reports and process assurance findings as a result of the oversight activities.

Review and assess acceptability of corrective action plans addressing identified process assurance findings.

Conduct follow-up of corrective action plan implementation.

Collect measurements and provide metrics to support the development of regular visibility reports related to process assurance execution as well as oversight activity results.

Support the development and delivery of training to DADs / Integrators / Engineering Specialists in the Process Assurance methodology.

University degree in Engineering (or equivalent) with 5 to 10 years experience in the aerospace industry.

Knowledge of airworthiness, process assurance and/or quality assurance processes and requirements.

Experience in the development or verification of aircraft systems (using ARP4754A/4761 or equivalent standard) is required.
(The candidate may also have experience in the certification, development or testing of Software or airborne electronic hardware (AEH) according to structured development processes (RTCA/DO-178B or DO-254 or equivalent standard).

Knowledge of airworthiness, process assurance and/or quality assurance processes and requirements.

Display strong interpersonal and professional demeanor as a business representative of the company.

Must be willing to travel to support the process assurance audit/inspection activities.
 
Job Number: 2320
Job Location: Montreal, Canada
Rate: 54.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 01/10/2018
Last Updated: 03/13/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2321 - PROPULSION SYSTEMS ENGINEER - cv. word doc only

Description:
Design and integration of the system;

Review of the design and documentation of all the aspects related to your system;

Checking for quality of the Supplier's analyses;

Validation and verification of system requirements;

Validation and verification of system performance through design reviews, analyses, rig and aircraft testing;

Definition, preparation and execution of qualification and certification tests;

Working with supplier in the investigation and resolution of test findings;

Preparation or review of qualification or certification reports;

Working with suppliers to establish complete system requirements and system interfaces;

Liaison with stress, loads, reliability, maintainability and safety (RM&S), simulation, customer and operations support departments;

Provide support to business units in Propulsion Control requirement definition, verification and validation, following ARP4754

Identify issues and obstacles, follow-up and communicate progress;

Prepare reports or presentations.

Bachelor degree in Mechanical or Aerospace Engineering with a relevant experience of minimum of eight (8) years.

Possess very good knowledge in Propulsion Control Systems and their integration on the aircraft.

Background in design, integration, development and certification of Propulsion Systems.

Cognizant of the relevant Airworthiness Regulations and certification process.

Familiarity with Part 25 Regulations and certification requirements.

Flight testing/testing experience is an asset.

Have good oral and technical writing skills in English and French knowledge is an asset.

Motivated, self-starter, organized, autonomous and able to work under limited supervision

Team player and able to work with suppliers and customers.

Dynamic person with initiative, a strong sense of responsibility and good judgment

Have knowledge of MS Office software (essential).

Full flexibility is expected (may be on-call, shift-work, rotational work, weekends, odd hours, etc).

Must be able to travel to USA (Wichita) to support Flight testing and supplier reviews (if required).
 
Job Number: 2321
Job Location: Montreal, Canada
Rate: 58.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 01/11/2018
Last Updated: 05/18/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2327 - HYDRO-MECHANICAL SYSTEMS - FINAL ASSEMBLY LINE

Description:
Support the Client Mod-line in Montreal by leading all engineering related activities for a timely resolution to production line issues.

Witness system functional testing and conduct technical investigations on Hydro-Mechanical systems related issues, analyze and develop solutions/recommendations and reports. Disposition RFCs, RNCs, and Supplement 2s as required.

Review functional test requirements and ensure translation into mature functional tests

Track and ensure successful implementation of systems installations and modifications

Work with the product development team to assist with technical proposal activities, including preparation of written material and presentations. Recommend and review design changes

Develop good working relationships with various departments within BA and with all suppliers

Have a Bachelor of Engineering Degree and eligibility for Professional Engineer registration. AME license is an asset

Have experience in providing engineering support to a Final Line/ Production

Have 15 or more years experience in aircraft Hydro-Mechanical systems (Fly-By-Wire & Control Surfaces, Wing High Lift, Hydraulics, Landing Gear, Brakes, etc)

Are Conversant with design, qualification and certification test requirements of Hydro-Mechanical systems

Have flexibility to travel.

Are Familiar with Part 25 certification requirements and advisory material.

Possess strong integration skills, in both system partner management and system technical integration

Are familiar with Microsoft Office software tools

Have Strong communication skills, ability to work well in a multi-disciplinary team environment.

Full flexibility is expected (may be on-call, shift-work, rotational work, weekends, odd hours, etc).

Afternoon Shift (3:30 to 12:00); occasionally may have to support other shifts (as required).

Occasional business trips to Toronto and frequent travel between plants in Montreal.
 
Job Number: 2327
Job Location: Toronto, Canada
Rate: 66.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 02/01/2018
Last Updated: 03/29/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2335 - PROGRAM ANALYST - cv word doc only

Description:
Define PMO governances & meeting agenda, prepare necessary content (strategy, proposed schedule, business case, etc.) with all key stakeholders to accelerate decision making, communicate minutes of meeting, and follow-up on actions.

Lead projects within the Program Office organization in accordance with various elements of change or program decisions which impact the Final Line baseline activities and schedule.

Establish project schedule and drive the team toward defined milestones.

Lead or facilitate project governances, integration, communication, evaluation and execution reviews, approvals and eventually implementation into design and product with internal and external stakeholders.

Identify risks associated with schedule/milestone adherence and provide visibility on the mitigation plan.

Provide support and prioritization to Technical Focals/ Project Focals/Logistics Focals and Supplier Readiness teams

Identify gaps, monitor and propose improvements to supplier performance with supplier readiness team.

Provide visibility on supplier performance shortfalls and work with key stakeholders to neutralize gap.


Bachelor's degree in Engineering or Project Management and have at least five (5) to seven (7) years of experience in aeronautics.

Have relevant technical experience in interior completion on Client Platform and knowledge of certification requirements, Aircraft systems and interiors.

Knowledge in Project Management.

Have experience in the manufacturing industry (an asset).

are proficient with Microsoft Office Suite (Word, Excel, PowerPoint, and Project).

Have a good interpersonal, leadership & communication skills.

Are customer-oriented and innovative in problem solving.

Show an open mind and a great ability to work as a team player.

Must have a sense of organization, time management and you demonstrate autonomy.

Are driven for results.

Are bilingual (English & French).
 
Job Number: 2335
Job Location: Montreal, Canada
Rate: 56.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 02/09/2018
Last Updated: 05/03/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2336 - SR. ELECTRICAL WIRING DESIGNER - cv. word doc only

Description:
Perform as a technical authority in wiring diagram design.

Review and approve WD documentation and datasets in part or in whole

Provide technical support on change management implementation (RFC, PCR).

Recommend and approve design changes

Engage interior system stakeholders and meet results

Provide technical leadership to team.

Identify and manage technical risks & opportunities

Support Supervisor to disposition conflicting requests from different stakeholders.

Communicate lessons learned to other community members

Have a University degree in aircraft avionics or electrical engineering or equivalent work experience in wiring integration.

Have a minimum of 15 years of relevant working experience in aerospace.

Have wiring design, wiring installation and/or wiring troubleshooting experience.

Have experience with Mentor Graphics Logic tool.

Have a strong sense of responsibility and have good organization skills.

Must have excellent communication skills including the ability to read/write in English.

Are comfortable working with MS office suite.

Are familiar with BM%u2019s, RAE documents and BAPS related to harnesses.

Must have Knowledge of New EWIS Regulations.

Competencies:
You communicate clearly and openly with your team.

You embrace changes and new ideas.

You are persistent to reach your goals.

You seek out and accept feedback.
 
Job Number: 2336
Job Location: Montreal, Canada
Rate: 59.00
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 02/09/2018
Last Updated: 03/13/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2339 - FLIGHT DECK DESIGN & HUMAN FACTORS SPECIALIST

Description:
Define operational, functional and crew interface requirements and concepts,

Perform Analysis (task, flow, etc.),

Define Development and certification test requirements, Define simulation and prototyping requirements,

Define Test methodology, e.g. Workload, Error, Usability, etc

Perform Human Error Analysis,

Report design related issues,

Participate to problem solving,

Prepare documentation: Certification plan and report, Test plan, test card, observation grids, error log, etc

Participate and provide assistance in design reviews, liaise/interact with Flight Ops and Customers (pilots), liaise/interact with suppliers/partners, interface with certification authorities (Transport Canada, FAA, EASA), prepare technical presentations to management when requested.

Possess a Bachelor Degree in Engineering or equivalent.

Master's Degree in Ergonomics (or equivalent) is an asset.

Have at least 11 years' experience in aircraft systems development including user interface design and evaluation preferably.

Have a very good understanding of Flight Deck design standards (Mil STD, SAE ARP, ISO, etc) including aircraft systems operation and user interface design, automation principles, verification and validation methods, human reliability and safety requirements.

Have the ability to work without supervision, be organized, a team player, a self-motivated person, be Customer focused, and be able to work under pressure.

Show initiative, a strong sense of responsibility, and have an excellent technical judgment.

Must have a good knowledge of Part 25 certification process for Human Factors.

Previous experience in the definition and certification of at least one complex aircraft control system or avionics would be an asset.

Knowledge of Human or Maintenance Error Analysis is highly recommended.

Must have experience with Human Machine Interface test data analysis.
 
Job Number: 2339
Job Location: Montreal, Canada
Rate: 55.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 02/09/2018
Last Updated: 03/13/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2346 - QA INSPECTORS - cv, word doc only

Description:
As senior QA person with an Inspection background you will be responsible for establishing a strong technical foundation and solid reputation working on client's products or the industry in general.

Ensure compliance with applicable regulatory requirements as prescribed in Code of Federal Aviation Regulations (FAR) and/or foreign CAA regulatory requirements

Manage, administer and implement quality and record-keeping standards, practices, policies and procedures.

Supervise the training and deployment of Standard Practices and monitoring quality consistency

Lead, direct, and coach QA aircraft inspectors in performing aircraft assurance in line maintenance, and repair and overhaul quality control and inspection activities.

Assign inspectors in the areas of aircraft, parts, and NDT inspection based upon skill, experience, and qualification of individual team members

Ensure compliance with applicable FARs

Oversee records filing system for each aircraft, for example, aircraft flight log, airframe log book, engine log book, component records, delivery records, certificate of airworthiness, airworthiness directives, and radio license

IN ADDITION TO THE ROLE OF MANAGER, OUR CLIENT DOES HAVE REQUIREMENTS FOR QA INSPECTORS

They will support the Quality Manager or accountable manager in assigned duties and responsibilities

Have at least 20 years experience in quality assurance within aerospace industry, preferably woking or having intimate knowledge of the client's product(s), and having at least 10 years in supervisory or management role in maintenance or quality.

Working knowledge of applicable Federal Aviation Regulations

Have good interpersonal skills necessary to develop and maintain effective working relationships with our client's customers, regulatory agencies and representatives, suppliers, all levels of management team and other departments.

Experience on BA 415 aircraft is an asset

Having Inspection Authorization (AI) Certificate - an AME, are are also assets.
 
Job Number: 2346
Job Location: Victoria, BC Canada
Rate: 63.00 US
Per Diem: Paid throughout contract
Overtime: Paid at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 03/29/2018
Last Updated: 07/17/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2350 - TOOL DESIGNER - cv, word doc only

Description:
Define standard tooling requirements and expertise for the production line.

Provide expertise in design and the use of tooling.

Analyze specifications and drawings to create more complex jigs, parts or tooling.

Evaluate and test new tooling products (tool proof).

Design tools, jigs, fixtures and templates.

Keep up-to-date with new technologies.

Design tools, jigs, fixtures and templates drawings.

Make tooling instructions.

College or University mechanical or aerospace
engineering degree or equivalent with a minimum of 11 years of relevant experience.

Previous experience in design and creation of MBD and 2D drawings of detail parts (machined parts, sheet metal), assemblies and installation drawings in CATIA V5.

Good understanding of hydraulic, pneumatic, and electrical systems.

Ability to read drawings for the purchase of tool.

Ability to design tools, jigs, fixtures and templates.

Knowledge of aeronautic tools.

Ability to communicate with supplier.

Catia V5 is required.

Catia V4 and Autocad are an asset.

Cost minded with the focus of maintain ability and ease of use.

Knowledge of Windows environment.

Must have experience in Primary and Secondary Aircraft Structures.

Previous experience with Mechanical systems and systems installations an asset.

Bilingual - must be able to read and write in both French and English and must have excellent communication skills.

IMPORTANT:

2 Positions available for Day shift (Start time = between 6:30 and 8:00AM)

2 Positions available for Evening shift (Start time = between 3:00PM and 5:00PM)

The workstations are shared between the 2 shifts, therefore
the start time for the evening shift depends on the start time
of the day shift.
 
Job Number: 2350
Job Location: Montreal, Canada
Rate: 63.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 6+ Mths
Start Date: ASAP
Input Date: 03/29/2018
Last Updated: 04/11/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2354 - CABINET INTEGRATOR - cv, word doc only

Description:
First point of contact for BA and Supplier Integration team

Prepares Kickoff package needed for Outsource supplier to be able to start design work.

Assists Supplier in technical solutions.

Has an Overview and general understanding of the monument including sub systems.

Coaches and Assist Supplier in understanding and following BA processes and best practices.

Highlights opportunities to improve the product/process (ex: weight reduction, DDP strategy, etc)

Reviews engineering packages to ensure that nothing is missed.

Participates in scheduling of deliverables and works with Project team to ensure that deliverable dates are meet.

Communicates Milestone readiness (3DDR model freeze, CDR exits etc).

Support Weekly Quality Meetings presenting Quality KPI to calibrate Quality

Attends IPDT weekly Meetings.

Participates and supports in Design RFCs raised by HCL and Production RFCs raised by Liaison

Bachelor's degree in Mechanical Engineering with at least five (5) to seven (7) years of Client Program experience.

Have knowledge of Catia V5 is required with a minimum of five (5) to seven (7) years of Catia design experience.

Have relevant technical experience in interior completion on Client Platform and knowledge of certification requirements, Aircraft systems and interiors.

Have good communication skills including good English writing skills, and good English and French verbal skills.

Are a team player, you have the ability to work with minimal supervision, and are able to make decisions.

Must have design experience in cabinet assembly design and/or cabinet installation.

Experience in interiors completion Design is required.

Must have good trouble shooting and organisation skills.

Must have excellent negotiation skills.

Must be detail oriented.
 
Job Number: 2354
Job Location: Montreal, Canada
Rate: 60.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 24 Mths
Start Date: ASAP
Input Date: 03/29/2018
Last Updated: 04/12/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2355 - PROJECT CONTROL ANALYST - cv, word doc only

Description:
Project Manage cross-functional reports/projects/initiatives while maintaining strategic focus ensuring deadlines are met with the appropriate level of quality.

Manage Program-level Tier 1 milestones to ensure there is a robust plan in place and mitigation plans as required.

Monitor and control risk activities across the program.

Drive program decisions based on analysis.

Support governance activities as required.

Work with functions to expedite or resolve issues in order to help advance the overall program schedule.

Execute on aircraft level strategic initiatives depending on the needs of the program.

Be a liaison with different teams within the Client Program such as engineering, customer support, operations.

University degree in a related field (Engineering, Business) with eight years of experience in the aerospace industry.

Must have experience in schedule analysis to identify critical paths and gaps.

Have a basic technical understanding of an aircraft such as aircraft design, system design, certification, manufacturing and/or aircraft operation.

Must be bilingual - have excellent communication skills: verbal and written (in both English and French).

Have good computer skills, particularly in PowerPoint and Excel.

MS Project would be an asset.

Working experience with A/C development is an asset.

Must have excellent troubleshooting and problem solving skills.

Knowledge of the client's aerospace engineering system is an asset.

Have the ability to get things done.

Have previous experience in project/program management; a PMP would be an asset.

Have excellent problem solving skills.

Can influence others without formal authority.

Can build rapport quickly with various stakeholders.
 
Job Number: 2355
Job Location: Montreal, Canada
Rate: 55.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 03/02/2018
Last Updated: 03/13/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

3 Aircraft Stress Engineers - Composites

Description:
Aircraft composite stress engineering contractors needed.
MUST BE US PERSONS.
Ability to work in a fast paced environment (rapid prototyping environment or concept aircraft experience a plus).
MUST have a good Composites Primary Airframe Structures background.
FAR 23 experience is a huge plus.
Classical hand analysis, Nastran, FEMAP a plus
US PERSONS REQUIRED

Position Responsibilities
This is a Senior Level Contract Stress Analyst position.
General Minimum Requirements:
• Education: MS with 8+ years, or BS with 1O+ years of relevant experience
• Create engineering criteria and analysis methods to ensure that the work meets all program requirements (e.g., airworthiness, customer requirements, internal methods and processes, etc.).
• Actively develop and evaluate plans for activities and soundness of proposed methods and analysis to meet the program schedules and airworthiness standards.
• Select appropriate material systems for structures applications and identify all material testing requirements.
• Identify and communicate technical risks to the relevant stake holders through program status reports in a timely manner.
• Review all program critical documents such as stress reports, manufacturing plans and procedures, and structural test plans in a timely manner to ensure compliance with design and loads requirements.
• Resolve complex engineering issues in creative and effective ways as to balance technical product, cost, and schedule.

Must be a US Citizen, or Greencard holder.

THE STRUCTURES COMPANY IS AN AA/EOE
 
Job Location: Manassas, VA
Rate: $75-85/hr DOE
Per Diem: Yes
Overtime: Possible
Duration: 12-months+
Start Date: ASAP
Input Date: 10/30/2018
Last Updated: 11/14/2018
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: chrissheets@thestructurescompany.com
Website: www.thestructurescompany.com

2 Aircraft Stress Engineers with Composites

Description:
2 Aircraft Stress Engineers Needed.
Require 10+ years of aircraft/aerospace stress analysis with a good composites background.
Previous FEMAP experience is a plus.
Composite airframe analysis experience a MUST.
MUST be US Persons

Qualifications:
-Experience in aircraft or spacecraft composite, design and analysis processes
-Knowledge of composites manufacturing and sizing of composite structures using FEA models, including pre and post processing of NASTRAN models and associated sizing of composite structures
-Minimum 10 years or more of applicable experience in the analysis of structural systems using strength of materials and finite element based methods
-Experience with free-body diagrams and classical stress analysis techniques
-Experience with FEMAP
-Rapid prototyping experience a strong plus
-Excellent computer skills, including Outlook, Word, Excel and PowerPoint
-Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired
-Applicants must be U.S. persons as defined by ITAR
Educational Requirements-
Bachelors degree from an accredited institution, with a concentration in a relevant Engineering discipline

The Structures Company is an AA/EOE.
 
Job Location: Mojave, CA
Rate: $75-85/hr
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 10/30/2018
Last Updated: 11/14/2018
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: chrissheets@thestructurescompany.com
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Engineers - Atlanta, GA

Description:
STS AeroStaff Services is hiring Aerospace Engineers in Atlanta, Georgia.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Duties:

• Perform research and surveys to determine the best methods to modify aircraft to accomplish project statements of work.
• Design new mechanical parts, assemblies and installations defining aircraft modifications.
• Perform analysis and substantiation of new parts and installations.
• Produce engineering drawings, reports, material lists and work instructions to document & install aircraft modifications.
• Provide engineering checks of data produced by peer groups or other project participants.
• Provide technical support during manufacturing and installation of aircraft modifications.
• Interface with customers, suppliers and other project stakeholders pertaining to modification projects.
• Provide guidance and oversight to engineering peer group, and mentor new engineers to operate within departmental practices and procedures.
• Provide statements of work, cost estimates, completion schedules and other project administrative inputs.
• Practice safety-conscious behaviors in all operational processes and procedures.

Qualifications:

• B.S. in engineering or related scientific field. Equivalent experience may be substituted.
• Three (3) years overall work experience, two (2) of which in a design engineering role.
• Must have strong computer skills and demonstrate proficiency with 2D/3D CAD systems and MS Office programs.
• Must have strong knowledge of aircraft mechanical/structural design processes, materials, fabrication methods and aerospace hardware.
• Must possess working knowledge of substantiation techniques and FAA regulatory requirements.
• Must be able to effectively utilize aircraft continued airworthiness data.
• Must be organized and an effective project manager, presenting good communication skills and a professional appearance. Preferred:
• Knowledge of aircraft interiors, composites and entertainment systems.
• Experience with Product Lifecycle Management (PLM) software.

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 41685
Job Location: Atlanta, GA
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 03/05/2018
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

Aircraft Painter II

Description:
PDS Tech is seeking an  RS Acft Painter II for an open position in Savannah, GA.


The Aircraft Painter II works under minimum supervision to safely prepare, paint and detail aircraft according to schedule using company quality standards and operating procedures. 

Principal Duties and Responsibilities:

Essential Functions:
1. Safely perform aircraft preparation, painting, and detailing of aircraft under minimal supervision. Coordinate with supervision and Inspection to ensure compliance with internal and FAA paperwork, sign-offs and quality specifications. 2. Follow standard operating procedures when using tools and equipment such as dual action sanders, hydraulic lift platforms and paint sprayers. Properly care for and maintain shop equipment and tools. 3. Follow standard operating procedures when using sealants, paint strippers and corrosion-preventive chemicals and use protective equipment as required. 4. Comply with safety rules and procedures and be alert for unsafe conditions. Address unsafe conditions before putting people or property at risk. 5. Use the material tracking system to create parts demand, track squawks and to sign-off work. 6. Assist with aircraft movement in hangars. 7. Offer continuous improvement ideas/participate in continuous improvement activities. 

Education and Experience Requirements: High school diploma/GED. Valid Drivers License required. Two (2) years experience in related paint processes. Aircraft industry experience preferred. A working knowledge of paint processes and products (lacquers, enamels, epoxies, urethanes, and acrylics) is necessary.

Other Requirements: 1. Ability to read, write, speak, and understand the English language. 2. Able to use tools and equipment associated with the aircraft painting process. 3. Ability to read and interpret blueprints and engineering documentation. 4. Able to pass Pulmonary Function Test to obtain respirator certification. 5. Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift. 6. Must be computer literate.

Unique Skills: Aircraft Painting Skills

POC:  Clyde (813) 426-9917 or ccallwood@pdstech.com 


 
Job Number: 1710072520
Job Location: Savannah, GA
Duration: 6 months
Input Date: 08/23/2017
Last Updated: 11/14/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Clyde Callwood
Address: 3922 COCONUT PALM DR STE 100
City, State: TAMPA, FL 33601
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000023B6tAAE&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Records Specialists - Dallas, TX

Description:
STS AeroStaff Services is hiring Aircraft Records Specialists in Dallas, Texas.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Summary:

The Aircraft Records Specialist is responsible for the data entry, audits and updates of the daily production of maintenance accomplished documentation.

Job Duties:

• Audits maintenance packages of work accomplished, log page discrepancies and deferred maintenance items
• Reviews documentation of maintenance accomplished for accuracy, proper sign-off and compliance
• Performs the data entry in the Maintenance Activity Communication History module of the maintenance computer system
• Performs the removal and installation of components in the Component Control System module of the maintenance computer system
• Reviews and Updates documentation pertaining to AD's and modification compliance in the Modification Control System module of the maintenance computer system
• Ensures all scheduled maintenance has been audited for proper sign-off and updated in the system prior to the release of the aircraft
• Audit vendor airworthiness certification and enter work accomplished into the maintenance computer system
• Maintains aircraft and engine flight hours and cycles utilization reports, master log reports, and engine oil consumption reports
• Maintains historical records in the mainframe database for components, maintenance activity and communication and modification compliance
• Responsible for the retention of all aircraft maintenance records into an imaging system and ensure the documents are maintained permanently in accordance with standards and FAA regulations
• Processes engine, APU, and gear assembly build ups and teardowns documentation from vendor and shop locations
• Produces Aircraft Records specification reports when requested from outside parties
• Monitor correction requests
• Interact with Planning, Records, Reliability, Production and Engineering departments
• Responsible for verifying the accuracy of maintenance databases through various reports
• Submits recommendations for process improvements and assists Records Analyst in training new Employees

Qualifications:

• High school diploma or equivalency required; minimum two year college is preferred
• Minimum two years’ in the aviation industry (Records, Planning, Reliability, or Production) is preferred
• Must be able to master PC software packages including Microsoft Excel/Word/Access applications
• Experience working with an imaging system software is a plus
• Experience working with the Maxi-Merlin main frame application is a plus
• Valid Driver's License Required
• Ability to learn to read technical documents, follow instructions, and understand office procedures
• Must have vision ability sufficient to view and read computer monitor on a frequent basis
• Must be able to lift 30 pounds and drive on secured airport property
• Must meet confidentiality expectations as to confidential, proprietary and sensitive Company information
• Be able to use a computer with accuracy and/or use a computer keyboard with sufficient speed to meet demands of the job
• The ability to use 10-key by touch with sufficient speed to meet the demands of the job
• Must be able to perform mathematical computations
• Must work under tight time constraints to accomplish assignments and projects
• Flexibility to perform well under pressure
• Requires the ability to effectively prioritize daily work schedule with minimum or no supervision
• Strong organizational and communication skills and an eye for detail are needed
• Understanding of aircraft maintenance language and documentation process experience is a plus
• Requires shift, weekend, holiday and occasional overtime work

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 41715
Job Location: Dallas, TX
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 03/06/2018
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

Aircraft Stress Engineers

Description:
Nastran, Patran a plus
 
Job Location: GA/WI
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: sclark@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Assembly Mechanic (KS)

Description:
Assemble, install, seal, rig, inspect, and complete precision and other structural and system components, working from drawings, documents, process specifications, quality control requirements, and established processes and procedures. Functional test and correct, fit form and function of assemblies and components.

Duties:
The Company will provide appropriate assistance in job training to enable employees to perform all necessary job functions including the following:
1. Work with blueprints, changes, specifications, work orders, etc. to assemble and install to quality requirements parts and assemblies.
2. Complete required data gathering transactions to facilitate assembly progression.
3. Setup and perform all manual and automated assembly operations, and portable machine functions required to accomplish assignments.
4. Perform any and all required pickup, rework, fabrication, change incorporation, functional testing or check during or after final assembly and/or assembly progression.
5. Move and/or obtain correct parts, materials, tools, assemblies, etc.
6. Use precision measuring instruments required to accomplish work assignments.
7. Report and/or investigate job handicaps such as: errors in parts, assembly procedures, tools, sequences, etc.
8. Perform routine minor machine maintenance as part of their daily work duties (e.g., where applicable, replacing machine filters, changing standard light bulbs on machines and equipment, maintaining lubrication/coolant levels, etc. as related to basic Total Preventative Maintenance duties).
9. Routinely move product within the immediate manufacturing work area, including across isle, using shop assigned equipment as required and complete transactions necessary to move product to the next operation. On an exception basis, move product to the next operation within a building.
10. Support the continuous flow of product within the manufacturing process by training, coaching and assisting employees of all classification levels.
11. Document any discrepancies according to specification, process, and procedure.
12. Cross trains in inspection and becomes SIA qualified.

Sealer - Seal parts, assemblies and sub-assemblies fillet and fay, apply leveling compound or scotch cast etc.
• Pressure / Vacuum Test - Perform visual and auditory leak checks in aircraft sections
• Precision Bench Assembly - Assemble precision aircraft parts and assemblies such as landing gear, control linkage etc.
• Sub-Assembly - Assemble parts to make sub assemblies using templates, jigs, and fixtures
• Assembly / Installation Structures - Assemble structural parts, assemblies, and skins to make larger assemblies
• Assembly / Installation Doors - Pre- assemble, trim, fit , rig , seal, align, and adjust aircraft door systems
Integral Fuel Cell - Apply sealing compounds to seal fuel cell and wing section components
• Inspection - Inspect and document non conformances on final assemblies, subassemblies, systems, and installations
Verifies dimensions of parts using both mechanical and electronic measurement tools and, relative to these inspection duties, initiate and document corrective action for programming issues and other problems.

Requirements:
3-5 years aircraft sheet metal assembly - preferably large structures.

Must have heavy background of sealing, drilling and countersinking.

Need at least some experience building the structure of the aircraft - not exclusively MRO experience.

First three days will be spent obtaining Client Certifications.

Manager will review resumes and provide disposition - no interview.
 
Job Number: FD-596762KS
Job Location: Wichita, KS
Rate: $28.00/HR
Per Diem: Possible
Overtime: Possible
Duration: 3 Months
Start Date: 3/19/2018
Input Date: 03/07/2018
Last Updated: 03/16/2018
Firm Name: FOSTER DESIGN INC
Attention: Recruiter
Address: 200 W DOUGLAS AVE STE 110
City, State: WICHITA, KS 67202
Phone: 316/832-9700
800 Phone: 800/345-3394
Fax Phone: 316/832-9357
Website: www.fosterdes.com

Aviation Mechanics - Clearance

Description:
Seeking Experienced Aviation Mechanics for a contract opportunity in San Antonio, Texas!

Work to be performed on a VIP aircraft, 747 platform and active Top Secret Clearance Required.
Several Openings For:
  • General Mechanic
  • Electrical
  • Structures
  • Avionics Tech
  • Quality Inspection
  • Supply Chain Specialist


Great Opportunity for Ex-military/Exiting Military/ and Veterans
Previous military experience a plus!


 
Experience performing routine maintenance, modifications, and rework on VIP - 747 aircraft.
Required- Minimum of 5 years' experience working on 747 platform.
Tools: no tools required
Location: San Antonio, Texas

***Current Security Top Secret Clearance required
US Citizenship Required: Clearance requirements will be used during resume screening. Individuals must hold a current Clearance or Equivalent Clearance/ investigation type to be considered for this position, clearance level must be noted on the resume. Must follow submittal procedures below for consideration. No phone calls please, only candidates that provide resumes with the job ID number will be contacted and considered for the opportunity.

**submittal must reference Job ID number 1710063637

Camille Zunker- czunker@pdstech.com
 
Job Number: 1710063637
Job Location: San Antonio, TX
Duration: 12 months
Input Date: 02/27/2017
Last Updated: 11/14/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Camille Zunker
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002GBZ0AAO&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aviation NDT Technicians - Aguadilla, PR

Description:
STS AeroStaff Services is hiring Aviation NDT Technicians in Aguadilla, Puerto Rico.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Duties:

• Work at all zones and locations of the aircraft structure through limited access holes, such as fuel tanks, nose compartment and tail cone; be able to work in a height –to access vertical stabilizer, rudder tip etc.

Qualifications:

• Must have Eddy Current-HF and LF, Dye-Penetrant; advantage if experienced in Magnetic Particle and/or Ultrasonic and/or X-Ray
• Good communication skills in English and Spanish, both oral and written
• Availability to travel abroad

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 41713
Job Location: Aguadilla, PR
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 03/06/2018
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aviation Procurement Analysts - Atlanta, GA

Description:
STS AeroStaff Services is hiring Aviation Procurement Analysts in Atlanta, Georgia.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Summary:

Analysts provide direct technical support to Line, Base, Engine, and Component Maintenance organizations to ensure the provision of safe, compliant, and cost effective equipment, which is necessary for aircraft reliability and on time performance. Candidates for this position need to have past technical experience working in aircraft maintenance, machine shop, or ground support equipment as an AMT, Machinist, GMT or Engineer. Possession of Airframe and/or Powerplant licenses is desirable, as is a college degree.

Qualifications:

• 8-10 years of experience. Airframe and Power-Plant license with 5+ years aviation related experience or
• Avionics Certificate with 5+ years of aviation related experience or
• Bachelor’s or Master’s Degree in Aeronautics or Engineering with 5+ years aviation related experience or
• 7+ Years of Aircraft Tooling Experience including tool management, procurement, and allocation
• Prior leadership position
• Aircraft Tooling experience
• SAP training
• Ability to read and interpret AAs, SBs, ADs, wiring diagrams, AMMs, CMs, EMs and other technical documents

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 41531
Job Location: Atlanta, GA
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 03/05/2018
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Electrical System Designer

Description:
Avionic Electrical Systems Designer does integration and implementation. (design, certification and system support). Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of products and services. Contributes to planning, developing and coordinating of important engineering projects. Provides specialized technical assistance to team members. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems. Determines and develops own approach to solutions within schedule and cost objectives. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives. Acts as liaison with representatives outside of the assigned group/area Additional Functions. Actively works to improve daily processes and ensures all work meets customer requirements. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product. Performs other duties as assigned
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 5 yrs. in the specific technical discipline or 10 yrs. broad engineering experience in several technical disciplines with



Bachelors, or 3 yrs. in the specific technical discipline with Masters, or 1 yr. in the specific technical discipline with PhD.
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 01/30/2018
Last Updated: 05/18/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Systems Designers

Description:
*Must have a degree and be able to obtain security clearance
* DOORS & Agile Methodology Background
* Avionics system design engineers to help define the requirements for vehicle health management solutions for commercial and military platforms. This software will monitor and assess aircraft fault data to provide flight deck and maintenance personnel with appropriate information for assessing the health of the aircraft.

Please email resumes: mmccarthy@pdstech.com
 
Job Number: BO-MO-Avionics
Job Location: St. Louis, MO
Rate: $67.00/hour
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 03/06/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Technician

Description:
Avionics Technician provides technical expertise in testing aircraft systems, troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise by implementing process changes to reduce cost and meet schedule without compromising safety or quality. May fill in for the Senior Avionics/Electrical Technician thus ensuring that the company goals of safety and quality are enforced at all times while adhering to daily work plans to maintain schedule requirements.
Education:
High School graduate/GED. A & P license, FCC license or NCATT certification preferred. Four (4) years’ experience in an avionics/electrical career field; or two (2) years of accredited schooling in aviation electronics and two (2) years related experience.
 
Job Number: 116864
Job Location: Savannah, GA
Per Diem: Yes
Input Date: 01/19/2018
Last Updated: 05/18/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Rashmi
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics/Electrical Contractor (Custom Engineering)

Description:
Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of products and services

Unique Skills:
• Must be proficient at creating design and compliance data to support after-market installations on all company models.
• Must understand FAA/ODA/Industry requirements associated with aircraft modifications.

Education and Experience Requirements:
• Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Essential Functions:
• Contributes to planning, developing and coordinating of important engineering projects
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
• Acts as liaison with representatives outside of the assigned group/area
• Actively works to improve daily processes and ensures all work meets customer requirements
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
 
Job Number: 24-213
Job Location: Savannah, GA
Rate: $50 - $55
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 05/03/2018
Last Updated: 08/06/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Business Analysts - Melbourne, FL

Description:
STS AeroStaff Services is hiring Business Analysts in Melbourne, Florida.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Summary:

To provide information and analysis of operational and business functions as well as to take part in the implementation of policies and procedures and systems and tools in order to improve company’s efficiency and streamline processes.

Job Duties:

• Perform operational, business and cost analysis variance analysis); prepare related reports (e.g., management reports) as requested by company’s management.
• Perform analysis and reports that demonstrate compliance with the commitments and requirements of Space Florida or other development agencies.
• Play active role on the preparation of the annual budget (for costs centers and projects) and monthly forecasts devising multiple scenarios and “what-if” analysis.
• Control headcount strategy and analyze its impacts on budget forecast for cost centers and projects.
• Perform the Engineering allocation process, monthly, analyze impacts on projects actual costs and trends and draw up recovery plans.
• Support the billing process.
• Control the engineering office’s revenue and project costs; analyze the engineering income statement results on current results, trends and recovery plans.
• Other Ad-hoc requests.
• Provide support and reports for Managers

Qualifications:

Bachelor's Degree with a major in Accounting, Finance or related area required.

Experience:
• Generally 2-4 years of cost accounting and financial analysis experience required.
• Experience in performing general administrative support activities related to aircraft programs
• Demonstrated leadership abilities; team work; strategic thinker

Knowledge, Skills & Abilities:
• Knowledge of cost and financial accounting principles, practices and procedures.
• PC skills – strong Excel and Power Point skills required.
• Previous Access and financial planning and reporting systems experience preferred.
• Strong interpersonal and influencing skills.
• Initiative and achievement orientation.
• Bi-lingual English/Portuguese preferred.

Working Conditions / Environment/ Special Requirements:

• Ability to work in a safe professional manner adhering to all regulatory requirements including, OSHA, EPA, State and Federal regulations.
• Ability to work flexible hours if required.

GENERAL COMMITMENT FOR ALL EMPLOYEES

• Commitment to company values and complies with department norms, policies, directives, and procedures.
• Incorporates Lean and P3E processes and concepts into daily activities.
• Strive for continuous improvement to processes and procedures.
• Honors and protects confidential and proprietary documents and information.
• Satisfies work schedule requirements.
• The job description is not designed to cover or contain a comprehensive listing of all activities, duties or responsibilities that are required by the employee. Performs other duties as assigned

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 41622
Job Location: Melbourne, FL
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 02/26/2018
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CAD Designer - TEMPORARY

Description:
Designers/Drafters work with design engineers to translate concepts into fully documented designs. Responsibilities include development and maintenance of 3D models and detailed drawings. Applications include cockpits and instruments for flight simulators.
Qualifications
•Minimum of 4 years’ experience developing 3D models and detailed drawings
•Experience using SolidWorks and AutoCAD
•Ability to work in a collaborative environment to develop innovative solutions
•Working knowledge of ASME drafting standards including Geometric Dimensioning and Tolerancing
Desired Qualifications
•Associates Degree in Engineering or equivalent training
•Advanced SolidWorks training
•Experience using SolidWorks Enterprise Product Data Management (EPDM)
•Design/drawing checking experience
•Familiarity with aircraft cockpit systems
 
Job Number: 127478
Job Location: Broken Arrow, OK
Duration: 6 months
Start Date: 04/03/2018
Input Date: 03/14/2018
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: David Dodson
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Completions Design Engineer

Description:
• Design Engineer/Mechanical Engineering for Final Phase Completions.
• Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft.
• Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations.
• Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis.
• Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
• Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam.
• Design Engineer will be required to liaison with the shop on engineering issues.
• Design engineer will employ design standards consistent with company standards and accepted design methods are executed under the direction of the Mechanical Engineering Group Head to meet the manufacturing schedule.
• Additional responsibilities are out lined in the job description and as assigned by the Mechanical Engineering Group Head.
• Other preferred skills: Excel, Word and Power Point.

Experience/Education Required:
• Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
 
Job Number: 24-236
Job Location: Savannah, GA
Rate: DOE
Per Diem: YES
Overtime: YES
Duration: 1 Year plus
Start Date: ASAP
Input Date: 04/02/2018
Last Updated: 05/03/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Contract - Configuration/Change Management TSI

Description:
UNIQUE SKILLS
Aircraft Configuration Management experience required. Must be able to evaluate change requests, determine impact of change and provide guidance to ensure aircraft configuration is maintained. Must be able to clearly and concisely present technical status to leadership. Configuration Management (CM II) Certification preferred. Facilitates cross functional discussions between Operations, Engineering and Procurement. Has general knowledge of aircraft design principles

EDUCATION AND EXPERIENCE REQUIREMENTS
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs. in specific technical discipline or 10 yrs. broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs. for Masters, 4 yrs. for PhD in fields applicable to this job.

POSITION PURPOSE
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Client products and services

PRINCIPAL DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

ADDITIONAL FUNCTIONS
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

OTHER REQUIREMENTS
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 17-787-107101
Job Location: Southeast
Rate: $60.00 to $65.00/per hr.
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 03/21/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Contract - DER Electro-Mechanical Systems Eng Landing Gear Systems & Hydraulic Systems

Description:
UNIQUE SKILLS
Consultant DER or EAR with current FAA authorizations in Landing Gear and related Systems and Hydraulic Systems areas - Currently in good DER or EAR standing with the FAA - Currently up to date with all required FAA DER or EAR training, certification, etc. - Eligible to be recognized and approved by the Client ODA to perform DER and/or EAR functions, including but not limited to signing 8100- and related forms in the above noted areas, in support of Client ODA projects and released engineering deliverables across the G650, G550, and G450 platforms – Previous Client experience in the above noted areas and Client aircraft platforms, as well as with Client associated Engineering release processes and procedures, in a DER or EAR and Senior Engineer role is preferred - US Citizen only
 
Job Number: 17-786-116381
Job Location: Southeast
Rate: $135.00/per hour
Per Diem: Split
Overtime: Possible
Duration: LT
Start Date: AAP
Input Date: 02/28/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer **Must Have Commerical Aircraft Seat Experience**

Description:
Summary
This position is responsible for supporting Lead Engineers and/or senior level Engineers in the research, design and substantiation of the mechanical / payloads / systems and structures design within the Mechanical Engineering department utilizing established modeling and design standards. The Engineer 4 will support design and development of engineering packages based on customer and OEM requirements for production, retrofit applications and product development.
Essential Duties and Responsibilities include the following with other duties as assigned:
 Assigned design tasks include but not limited to: aircraft mechanical design, mechanical/structural/payloads/systems installations, detailed assemblies and mechanical/structural/payloads/systems specifications.
 Maintains or modifies mechanical/structural/payloads/systems based on defined requirements using approved processes and tools.
 Participates in teams to support the development of designs. Supports the documentation of design implementation.
 Obtain, interpret, and analyze OEM airplane install drawings using approved processes and tools.
 Provides technical, design and informational support for airplane modifications (including full-time on-site modification support and on-call home-team support), manufacturing support and/or in-service issues.
 Troubleshoots basic mechanical/structural/payloads/systems problems.
 Actively support engineering department goals and initiatives.
 Coordinate with other departments as necessary.
 Utilize internal drawing/document standards per customer or regulatory agency requirements.
 Some domestic or international travel may be required.
 Perform engineering design check and sign documents. With periodical technical guidance from mentor and lead.


 Perform engineering design analysis (such as preliminary Stress analysis, Kinematics and Dynamic Analysis), design validation (such as validate analysis models against test data) and task scope (such as work scope validation).
 Perform engineering design/analysis with minimum technical guidance.
 Provide mentoring and performance management input to PE/Functional Manager.
 Perform engineering design approvals (design/approval authority) and task scheduling (such as detailed schedule of a given task per program requirements).
 Perform engineering design analysis and validation (such as engineering development testing, ballistic testing, airplane and component functional test procedure, HALT, HASS, component qualification testing per RTCA/DO-160, etc).

Supervisory Responsibilities
This job may have some supervisory responsibilities when acting in the role of Lead Engineer and as delegated by the Functional Manager.
Qualifications
To perform this job successfully, an individual must be able to perform each essential duty to the established department standards (i.e. meet published metrics). The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
All external hiring is contingent upon the successful completion of a pre-employment drug screen and a criminal background check.
Requirements
Education and/or Experience:
BS degree Mechanical Engineering, Aerospace Engineering or related Engineering field and 6-8 years experience or equivalent working experience (15 years minimum in an aerospace related field).
Moderate travel within the U.S. and abroad may be required to support programs.
The Structures Company is an AA/EOE.
 
Job Number: 103
Job Location: WA
Duration: 9 Months
Start Date: ASAP
Input Date: 03/08/2018
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer - Aircraft Doors

Description:
General Summary:

Design Engineer must have experience aircraft doors. Will be responsible for the conceptual design and production engineering of Aircraft Doors structural and system components. The candidate will be responsible for conceptual layout, detailed design and aircraft production & in-service design and modification.

Duties and Responsibilities:
Generates Engineering Models and Drawings utilizing CATIA V5
Performs trade studies to identify optimal engineering solution
Collaborates with the Integrated Product Team to resolve cross functional issues
Reviews work performed by others and ensure work is to the highest standard
Implements Industry best engineering practices (design for manufacturing, design for reliability and design for maintainability).
Have the ability to understand and apply certification requirements
Implement design solutions optimized for cost and weight
Manages task execution to ensure on-time and on-target completion.
Utilizes drafting and Geometrical Dimensioning & Tolerancing (GD&T) knowledge to optimize part design for cost and functionality
Searches for problem root cause and develop corrective action plans and solutions
Serves as an interface within the Doors Engineering group to ensure effective communication, coordination, and timely completion of project milestones
Leads or participates in design / development reviews with management and internal customers. The candidate must have the ability to deliver technical presentations effectively to a diverse and demanding audience


Qualifications

Education, Work Experience, Certification and/or Licensure:

BS in Mechanical Engineering with 10-15 years directly related experience
OR MS / MBA with 8-13 years of experience
OR 18-23 years directly related experience

Some Travel may be required

Knowledge, Skills and Abilities:
Proficient in use of CATIA Version 5
Advanced knowledge of drafting rules
Advanced knowledge of Geometrical Dimensioning and Tolerancing
Proficient in Microsoft Office Products
Use of Team Center
Familiar with FAR Part 23 or Part 25
Functional knowledge of SAP


The Structures Company is an AA/EOE.
 
Job Number: 127
Job Location: NC
Duration: 9+ Month
Start Date: ASAP
Input Date: 02/26/2018
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer - Completions

Description:
UNIQUE SKILLS
This is a Design Engineer position in Structural/Mechanical Engineering for Completions Engineering. Responsibilities primarily involve engineering design, modeling, and drafting of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft. Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, entertainment equipment installations, and seating installations. The design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation. Engineering design work includes the creation of drawings/models using either AutoCAD or CATIA V5. Design engineer will employ design standards consistent with company standards and accepted design methods. Engineer will be required to liaison with the shop on engineering issues. Design assignments are executed under the direction of a Lead engineer or Group Head to meet the manufacturing schedule. Additional responsibilities are out lined in the job description and as assigned by the Lead or Structural/Mechanical Engineering Group Head.
 
Job Number: 18-809-123381
Job Location: Northcentral
Rate: OPEN
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 02/28/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Support and Training - Instructor - Tech Spec II

Description:
UNIQUE SKILLS
CATIA v5 experienced with 5000+ hours. All Level 1 tools CATIA v5 (Part Design, Assembly, Drafting). Level 2 tools CATIA v5 Generative Surfacing, Free Style Shaping, Generative Sheetmetal, Generative Stress Analysis. Other tools: CATIA v5 Composites, Electrical EHI, Capitol Harness, Tubing experience a plus. Quantitative experience with Geometric Dimensioning and Tolerances a plus. Experience working within PDM systems such as Enovia, SmarTeam or NX/Teamcenter. Formal Classroom instruction experience required for CATIA and PDM.

EDUCATION AND EXPERIENCE REQUIREMENTS
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 10 yrs. in specific technical discipline or 15 yrs. broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs. for Masters and 4 yrs. for PhD in fields applicable to this job.

POSITION PURPOSE
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of client products and services

PRINCIPAL DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

ADDITIONAL FUNCTIONS
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
2. Performs other duties as assigned

OTHER REQUIREMENTS
1. Advanced degree in engineering, or related curriculum preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 17-758-82041
Job Location: Southeast
Rate: $60.00 to $62.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 02/28/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design and Analysis Engineer 3

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Design and Analysis Engineer 3
(U.S. Citizenship Required*)
Berkeley, MO
2018-5558

Responsibilities:
• Avionics system design engineer – help define requirements for vehicle health management solutions for commercial and military platforms. This software will monitor and assess aircraft fault data to provide flight deck and maintenance personnel with appropriate information for assessing the health of the aircraft. There will be both on-board (semi-realtime to realtime) and off-board functionality to this software.
• Develop throughput/memory requirements, functionality requirements, technical performance measures, risk identification and mitigation, integration activities, and test development and execution.

Qualification:
• Required – Able to obtain Interim Secret Clearance.
• Required – Intermediate proficiency with DOORS
o Experience in defining avionics systems requirements in DOORS
• Required – Intermediate skill using Agile methodology
o Experience with Agile development methodology is desired. Experience with the Atlassian tool suite is desired.
• Experience in developing integration & test plans in a large scale, complex system is required.
• Experience with aircraft health management systems is desired.
• Experience with subsystem fault detection and reporting is desired.
• Experience developing systems in a geographically dispersed environment is desired.
• Able to travel internationally as required.
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.
• Degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2018-5558
Job Location: Berkeley, MO
Duration: 12 Months
Input Date: 03/06/2018
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Sallye Smith
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical (EWIS) Engineer -TSII

Description:
UNIQUE SKILLS
Develop electrical wiring interconnect systems (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wiring diagrams, cable/wire harness assemblies, and rack/panel designs from electrical system schematics adhering to EWIS requirements. Select qualified electrical components such as connectors, backshells, and other parts. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements. • Aerospace Experience is required • Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required • Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative • Knowledge of Mentor Graphics Capital Harness Systems (CHS) is strongly desired

EDUCATION AND EXPERIENCE REQUIREMENTS
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.


POSITION PURPOSE
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of client products and services

PRINCIPLE DUTIES AND RESPONSIBILITIES
Essential Functions
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

ADDITIONAL FUNCTIONS
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

OTHER REQUIREMENTS
1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 18-813-123182
Job Location: Southeast
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 07/11/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical (EWIS) Engineer

Description:
Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Duration: Long Term Contract
Shift: 1st Shift


Unique Skills:
Develop electrical wiring interconnect system (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wire harness assemblies, utilizing CATIA V5 Electrical and Sheet Metal Work Benches. Capable of interfacing with wiring diagrams, systems, and EMI/EMC requirements. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements.
• Aerospace Experience is required
• Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required
• Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative
• Knowledge of Catia V5 Electrical is required

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

Principle Duties and Responsibilities:
Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7977
Job Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 03/21/2018
Last Updated: 06/11/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical (EWIS) Engineer

Description:
Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Duration: Long Term Contract (1-4 years)
Shift: 1st Shift

Unique Skills:
Develop electrical wiring interconnect systems (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wiring diagrams, cable/wire harness assemblies, and rack/panel designs from electrical system schematics adhering to EWIS requirements. Select qualified electrical components such as connectors, backshells, and other parts. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements. • Aerospace Experience is required • Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required • Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative • Knowledge of Mentor Graphics Capital Harness Systems (CHS) is strongly desired

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

Principle Duties and Responsibilities:
Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 8548
Job Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 03/09/2018
Last Updated: 03/21/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Applications Engineering

Description:
UNIQUE SKILLS
Experience with Autocad required. Aerospace experience required. Experience or knowledge of electrical connectors, backshells, shielding, wiring and electrical connectivity is required. Be Familiar with CFR 14 Part 25 and AS50881. Candidate must be able to create wiring diagrams and schematics to include the selection of qualified electrical components such as connectors, backshells and other electrical parts. Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required. Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project.

JOB DESCRIPTION
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs. in the specific technical discipline or 10 yrs. broad engineering experience in several technical disciplines with Bachelors, or 3 yrs. in the specific technical discipline with Masters, or 1 yr. in the specific technical discipline with PhD. Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

PRINCIPAL DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

ADDITIONAL FUNCTIONS
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

OTHER REQUIREMENTS
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 17-736-93664
Job Location: Southeast
Rate: $58.00 to $63.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 03/21/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design Engineer

Description:
The primary design work will be in the areas of analog, digital, and power conversion circuitry used in commercial and military aerospace products.


You will interact with key colleagues and stakeholders in multiple disciplines and functions, including board design, hardware design, systems engineering, software development, program and project management, etc.


In addition you will :
• Design for safety, testability, and manufacturability
• Define Hardware architecture
• Select electrical components for rugged environments
• Schematic capture
• PCB area estimation, power dissipation, component stress
• Troubleshoot analog and digital circuits
• Perform and document root cause analysis
• Design Failure Mode Effect Analysis (DFMEA)
• Perform Circuit Worst Case Analysis
• Perform Electrical simulation
• Perform Design to cost analysis
• Support PCB design with EMC and manufacturability guidelines
• Support mechanical design, software, test engineering, and manufacturing
• Support qualification and acceptance testing
• Support lifetime testing, EMC, electrical pulses, ESD
• Sensor interface design (tachometers, accelerometers, synchros, etc.)
• Design for rugged, safety-critical environments

Role Summary/Purpose :

As Lead Engineer, Electronic Hardware Design for GE Aviation's well-established and highly successful global Avionics & Airborne Electronics business, you'll provide technical expertise to support development of embedded Avionics products, project execution and design support.

This is soup-to-nuts development of new state-of-the art aircraft components.
Qualifications/Requirements :
• BS Electronic Engineering or Electrical Engineering from an accredited university or college
• 2 years of experience designing analog and digital hardware for airborne or automotive applications
• 5 years of Engineering experience

ELIGIBILITY REQUIREMENT :
• This role is restricted to U.S. persons (i.e., U.S. citizens, permanent residents, and other protected individuals under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3)) due to access to export-controlled technology. GE will require proof of status prior to employment
Desired Characteristics :
• Understanding of analog, digital, and power theory
• Familiarity with Electronics Lab test equipment, and test methods
• Capable of developing and writing specifications in an engineering environment
• Expertise with PSPICE CAD design tools
• Familiarity with design, test and analysis tools and systems
• Development to DO-254 and DO-160 standards
• FPGA design experience
• DC to DC converters design experience
• Strong oral and written communication skills
• Strong interpersonal and leadership skills
• Ability to influence others and lead small teams
• Lead initiatives of moderate scope and impact
• Ability to coordinate several projects simultaneously
• Effective problem identification and solution skills
• Proven analytical and organizational ability
 
Job Number: 7671
Job Location: Pinellas Park, FL
Rate: Open
Per Diem: Split
Overtime: Yes
Duration: 12 months
Start Date: 2 weeks
Input Date: 03/08/2018
Firm Name: BENTLEY GLOBAL RESOURCES LLC
Attention: Johnathon Williams
Address: 3937 TAMPA RD STE 3
City, State: OLDSMAR, FL 34677-3115
Phone: 813/854-1500
Fax Phone: 813/854-1605
Website: www.bentleygr.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design Engineer

Description:
Electrical design, integration, test and production support of simulation equipment. Responsibilities include development of system-level drawings, cable drawings and wire lists.

Must have an Active Secret Security Clearance.
•Bachelor’s degree in Electrical Engineering or equivalent experience in an engineering discipline
•Prefer 4+ years of directly related experience
•Cable harness design experience
•Experience with electro-mechanical devices such as switches, relays, servos and solenoids
•Analog and digital circuit design experience
•Experience using CAD tools and Microsoft Office products
•Must have strong verbal and written communication skills with the ability to communicate complex issues to technical and non-technical audiences that include peers, management, and customers
•Ability to develop innovative solutions both individually and as part of a team
•Close attention to detail with a track record of producing designs that are right the first time

Desired Qualifications
•Experience using AutoCAD
•Familiarity with aircraft cockpit systems
•Experience using Programmable Logic Controllers
•Simulation equipment experience
•Circuit board layout experience
 
Job Number: 127187
Job Location: Broken Arrow, OK
Per Diem: No
Overtime: No
Duration: 6 months
Start Date: 03/19/2018
Input Date: 03/14/2018
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: David Dodson
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design Engineer

Description:
Location: Savannah, GA
Rate: $60.00 - $63.00/HR
Duration: Long Term Contract
Shift: 1st Shift


Unique Skills:
- Candidate shall have experience in one or more of the following: Electronic hardware design, Data acquisition system design, Industrial process measurement

Education:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.10 yrs in the specific technical discipline or 15 yrs broad engineering experience in several technical disciplines with Bachelors, or 8 yrs in the specific technical discipline with Masters, or 6 yrs in the specific technical discipline with PhD.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Company products and services

Principal Duties and Responsibilities:
Essential Functions:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 2. Performs other duties as assigned

Other Requirements:
1. Advanced degree in engineering, or related curriculum preferred 2. The level of technical skill
and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7701
Job Location: Savannah, GA
Rate: $60.00 - $63.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 05/17/2018
Last Updated: 08/06/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design and Aircraft Interior Eng Contractor TS II

Description:
UNIQUE SKILLS
Experience in engineering liaison and design of electrical systems that are part of and support aircraft interiors. This includes entertainment, power, lighting, cabin management and communication systems. Experience in writing engineering corrective action dispositions by performing associated research; creating modification wiring diagrams, schematics, wire harness drawings, electrical installation drawings and completing supporting analysis/calculations (e.g. voltage drop) AutoCAD, CATIA V5 and SmarTeam experience preferred Take ownership of deliverables produced & their quality. Coordination with the other Engineering disciplines, client and vendors. Experience with leadership/program management on a design program. Take lead role in the process of preparation of design deliverables to ensure appropriate checking & review of all documents / drawings before release.

EDUCATION AND EXPERIENCE REQUIREMENTS
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs. in specific technical discipline or 15 yrs. broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs. for Masters and 4 yrs. for PhD in fields applicable to this job.

POSITION PURPOSE
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

PRINCIPLE DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

ADDITIONAL FUNCTIONS
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

OTHER REQUIREMENTS
1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 17-777-110701
Job Location: Southeast
Rate: $65.00 to $70.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 07/11/2018
Last Updated: 08/13/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design and Cabin Management Eng Contractor TS II

Description:
UNIQUE SKILLS
Experience in engineering design of electrical systems that are part of and support aircraft interiors. This includes entertainment, power, lighting, cabin management and communication systems. Experience in creating wiring diagrams, schematics, wire harness drawings, electrical installation drawings and completing supporting analysis/calculations (e.g. voltage drop) AutoCAD, CATIA V5 and SmarTeam experience preferred Take ownership of deliverables produced & their quality. Coordination with the other Engineering disciplines, client and vendors. Experience with leadership/program management on a design program. Take lead role in the process of preparation of design deliverables to ensure appropriate checking & review of all documents / drawings before release.

EDUCATION AND EXPERIENCE REQUIREMENTS
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs. in specific technical discipline or 15 yrs. broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs. for Masters and 4 yrs. for PhD in fields applicable to this job.


POSITION PURPOSE
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of client products and services

PRINCIPLE DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

ADDITIONAL FUNCTIONS
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

OTHER REQUIREMENTS
1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 17-776-111061
Job Location: Southeast
Rate: $65.00 to $70.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 03/21/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

Electrical Design Engineer

Description:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of products and services

1) AutoCAD required, Catia V5and CHS preferred
2) Electrical system design experience preferred
3) 14 CFR 25 Subpart H - EWIS experience preferred
4) Part 25 Certification Experience for Cabin Interiors preferred
5) Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems.
6) Experience with power distribution, lighting, switching, sizing and routing.
7) Familiarity in mechanical system design
8) Familiarity with aircraft STC procedures preferred.
9) Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position required
 
Job Number: 24-288
Job Location: Savannah, GA
Rate: $68/hr
Per Diem: YES
Overtime: YES
Duration: 1 Year plus
Start Date: ASAP
Input Date: 11/14/2018
Last Updated: 11/14/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Email: matt@precisionpersonnel.com
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Location: Savannah, GA
Pay Rate: $58/hr - $63/hr
Duration: Long Term Contract
Shift: First

Unique Skills:
-This position will review designs for Electrical Systems aspects.
-Activities include interacting and coordinating with DERs/ARs during a certification project, coordinating, tracking and completing certification tasks, writing certification plans, test plans, test reports and preparing related paperwork and forms.
-The ideal candidate will have:
-At least one (1) year experience with certification activities associated with STC projects
-Experience with aircraft interior outfitting preferred.
-Current Electrical Systems DER/AR designation preferred
-EWIS experience desirable

Education and Experience Requirements:
-Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

-Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area.

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7129
Job Location: Savannah, GA
Rate: 58.00-63.00
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 05/22/2018
Last Updated: 06/11/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
SUMMARY
Performs a variety of engineering work including design, analysis, substantiation, certification, drawing interpretation and project management as related to transport category aircraft.

ESSENTIAL DUTIES AND RESPONSIBILITIES
Create step by step work instructions for the removal and installation of hardware and components as they relate to aircraft structures, systems, interiors and avionics. Troubleshooting of noted aircraft systems Repair, design and analysis of metal, composite and metal bond structures Knowledge of the Federal Aviation Regulations FARs from Title 14 of the Code of Federal Regulations as they apply to transport category aircraft. Knowledge of cabin specific regulatory requirements, including flammability and crashworthiness as examples Familiarity with the Supplemental Type Certificate STC process Familiarity with the FAA Airworthiness Directive AD process and rules governing disposition Translates guidance and engineering principles and procedures into usable working direction for assigned projects Ability to read and interpret technical drawings, preferably those created by Boeing, Airbus and Douglas. They should also be familiar with the documents needed to routinely maintain commercial aircraft Structural Repair Manual SRM, Aircraft Maintenance Manual AMM, Illustrated Parts Catalog IPC, etc. Ability to analyze Original Equipment Manufacturer OEM source documents Service Bulletins, Service Letters, etc. and make independent decisions based on analysis of available data regarding incorporation on Customers fleet. Ability to quickly learn and adhere to Operators specific processes and procedures. Project Management skills multiple task Gathers, coordinates and applies basic engineering data using established and appropriate or defined engineering principles and procedures Applies area of specialty to design, develop and implement creative and innovative solutions to difficult problems Reviews progress with management and recommends corrective action along with review of alternatives Performs such individual assignments as supervisors and superiors may direct ensures adequate and continuous controls are exercised over all assigned activities affecting quality establishes and maintains effective work relationships within the department, the Corporation and the community and maintains the professional competence, knowledge and skill necessary for the satisfactory performance of all assigned responsibilities Travel as required All other duties as assigned.
 
Job Number: 17-729
Job Location: Midwest
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 03/21/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer (Cabin Systems)

Description:
• Ideal Candidates will have electrical engineering experience with Aircraft Cabin Interiors and System. This includes:
o Cabin interior monuments and Seats
o Cabin Management System
o Cabin Entertainment System
o Cabin Lighting and Cabin Switch Controls
o Telephone System
o Satellite communications
o Water System and Waste System
o EWIS

Education and Experience Requirements:
• Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 10 yrs in specific technical discipline or 15 yrs broad engineer experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.
 
Job Number: 24-208
Job Location: Savannah, GA
Rate: $58 - $63
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 02/22/2018
Last Updated: 06/22/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Harness Installation Engineer - Special Missions

Description:
Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Duration: Long Term Contract (1-4 years)
Shift:1st Shift


Unique Skills:
Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project. Aerospace experience is required. Knowledge of Catia V5 is required. Candidate must be able to design wire harness assemblies and installations utilizing the Catia V5 Electrical and Sheet Metal Work Benches. Must have intimate knowledge of an ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements, while meeting all installation and maintainability requirements. Candidate must possess knowledge of regulatory guidance material relative to aircraft harness design. Excellent verbal and written communication skills, and computer skills (Catia V5, Catia V4, PC/MS Office) are required.

Job description:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

Principal Duties and Responsibilities:
Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned
 
Job Number: 7876
Job Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 03/09/2018
Last Updated: 03/12/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Harness Installation Engineer-Special Missions

Description:
UNIQUE SKILLS
Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project. Aerospace experience is required. Knowledge of Catia V5 is required. Candidate must be able to design wire harness assemblies and installations utilizing the Catia V5 Electrical and Sheet Metal Work Benches. Must have intimate knowledge of an ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements, while meeting all installation and maintainability requirements. Candidate must possess knowledge of regulatory guidance material relative to aircraft harness design. Excellent verbal and written communication skills, and computer skills (Catia V5, Catia V4, PC/MS Office) are required.

JOB DESCRIPTION
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs. in the specific technical discipline or 10 yrs. broad engineering experience in several technical disciplines with Bachelors, or 3 yrs. in the specific technical discipline with Masters, or 1 yr. in the specific technical discipline with PhD. Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Client products and services

PRINCIPAL DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

ADDITIONAL FUNCTIONS
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned
 
Job Number: 17-783-115282
Job Location: Southeast
Rate: $58.00 to $63.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 07/11/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Power-Loads Engineering Contractor - Special Missions

Description:
UNIQUE SKILLS
Required Experience in the following:
• Electrical Power Generation, control and indicating
• Power Distribution, control and indicating
• Electrical Load Analysis

JOB DESCRIPTION
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs. in the specific technical discipline or 10 yrs. broad engineering experience in several technical disciplines with Bachelors, or 3 yrs. in the specific technical discipline with Masters, or 1 yr. in the specific technical discipline with PhD. Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of client products and services

PRINCIPAL DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

ADDITIONAL FUNCTIONS
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

OTHER REQUIREMENTS
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
Desired Experience in the following:
• Working Knowledge ARP4754 and CFR 25
• Project Management Skills/Experience
• Configuration change management
 
Job Number: 17-742-103561
Job Location: Southeast
Rate: $58.00 to $63.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 07/11/2018
Last Updated: 07/20/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Systems Design & Analysis Engineers III - OK

Description:
Active Secret Clearance, NOT REQUIRED to start.

Our Aerospace Client is currently seeking an experienced Electrical systems Designers to perform Electrical Loads Analysis and power systems modification. This
includes Airborne Surveillance Command and Control aircraft from around the world including, NATO, French, Saudi, US, UK, Japan AWACS, B-52 Bombers, C32/C40 VIP transports, , the E-4 National Airborne Operations Center, KC-767
International Tankers and VC-25 presidential transport.
This position is located in Oklahoma City, Oklahoma
Job Responsibilities will include but not be limited to:
- Develop and document electrical load analysis based upon system design.
- Provide coordination memos with impact analysis for systems design changes.
- Present results of analysis at customer design reviews (PDR, CDR)
- Publish reports detailing the aircraft electrical load and bus capability.
- Utilize existing software to complete Electrical Load Analysis
- Direct a team of engineers providing individual direction.
- Leverage existing tools and help develop a path forward for a common tool for ELA.
- Works on unusually complex technical problems and provides solutions which are highly innovative and ingenious.
- Develops advanced technical ideas and guides their development into final product
- Serves as organization spokesperson on advanced projects and programs. Acts as advisor to management and
customers on advanced technical research studies.

Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

Previous experience with aircraft power distribution and architecture desired.

ACS Group (formerly 'Comforce')
 
Job Number: EEOK
Job Location: Oklahoma City, OK
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 9+ Months
Start Date: ASAP
Input Date: 01/09/2018
Last Updated: 03/09/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Systems Engineer

Description:
Electrical Systems Engineer

Location: Savannah, GA
Pay Rate: $58/hr - $63/hr
Duration: Long Term Contract
Shift: First

Unique Skills:
Aircraft power / electrical / avionic systems design, integration and implementation. (design, certification and system support)

Job description:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

Principal Duties and Responsibilities/Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 7677
Job Location: Savannah, GA
Rate: 58.00-63.00
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 03/07/2018
Last Updated: 05/17/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Systems Engineer

Description:
Unique Skills:
• Avionics System Integration Experience Require, Honeywell Epic System Experience Preferred

Position Purpose:
• Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of products and services

Education and Experience Requirements:
• Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Essential Functions:
• Contributes to planning, developing and coordinating of important engineering projects
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
• Acts as liaison with representatives outside of the assigned group/area
• Actively works to improve daily processes and ensures all work meets customer requirements
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
• Performs other duties as assigned
• Advanced degree in engineering related field preferred
• The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 24-215
Job Location: Savannah, GA
Rate: $58 - $63
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 02/22/2018
Last Updated: 05/17/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Wiring Design Engineer

Description:
This position is for an engineer that will perform wiring design and integration tasks associated with the Electrical Systems. This position will report directly to the Manager, Electrical Wiring Design.

Experience:
Seeking design engineers with experience in the creation and maintenance of aircraft systems wiring diagrams, parts lists, and electrical harness drawings. This involves detailed understanding and specification of aircraft electrical harness components selection, harness design requirements, harness level system separation, and system integration at the wiring level.
The potential candidate must be capable of working independently, must possess excellent coordination skills, and must work well in a multi-functional team environment.

Duties and Responsibilities:
Background and demonstrated ability is required in the technical areas listed below.

­ Electrical Wiring and Harness Design
o Wiring standards and ‘best practice’ design
o Wire gauge and type consideration (shield coverage, over-braid, wire twists/foot, temperature, bend radius, insulation, sleeves, etc.)
o Connector and backshell qualification and selection (EMI, high temperature, high vibration, environmentally sealed/hermetic, connector material compatibility, pin selection, etc.)
o Miscellaneous electrical harness hardware selection (splices, solder sleeves, grounding blocks, tie wraps, terminal lugs, etc)
o Development of configuration managed, electrical harness design packages
o Parts lists, bill of materials, parts and standards callout
o Fabrication techniques for integrated wiring assemblies
o Cost, weight, and schedule trade-offs
­ Wire Diagram and harness drawing generation
o Interpretation of system interface control data to conceptual schematics
o Evolution of conceptual schematics into aircraft wiring information
o Use of wiring design tool to generate wiring diagrams and harness drawings
­ System integration as it applies to complex wiring assemblies
o Good overall working knowledge of aircraft electrical/electronic systems
o Implementation of wiring and harness level system separation to avoid common cause failure modes, including electrical signal and power separation
o Databus and digital equipment interface considerations

Education, Work Experience, Certification and/or Licensure:
­ BSEE or equivalent and minimum of 5 years applicable work experience
­ Experience with IGE-XAO, Mentor Graphics, or similar wiring design tool
­ Good working knowledge with Teamcenter, Microsoft Office suite, and SAP
­ Experience with Catia V5 is a plus
­ Experience with electrical harness routing and installation requirements is a plus
 
Job Number: 28-020
Job Location: Greensboro, NC
Rate: $45-$50
Per Diem: Yes
Overtime: Yes
Duration: 1 year plus
Start Date: ASAP
Input Date: 02/28/2018
Last Updated: 05/03/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical/Aircraft Cabin Interiors & Systems Engineering Contractor

Description:
Electrical/Aircraft Cabin Interiors & Systems Engineer

Location: Savannah, GA
Pay Rate: $58/hr - $63/hr
Duration: Long Term Contract
Shift: First

Unique Skills:
Ideal Candidates will have electrical engineering experience with Aircraft Cabin Interiors and Systems to include but not limited to:
- Cabin Management System
- Cabin Entertainment System
- Cabin Lighting
- Cabin Switch Controls
- Telephone System
- Satellite communications
- Water System
- Waste System
- EWIS
- Cabin interior monuments
- Seats

Education:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area.

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 7428
Job Location: Savannah, GA
Rate: $58-$63
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 03/07/2018
Last Updated: 04/24/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronic Design & Analysis Engineer III - (MO)

Description:
INTERIM SECRET, NOT REQUIRED TO START.

Avionics system design engineers to help define the requirements for vehicle health management solutions for commercial and military platforms. This software will monitor and assess aircraft fault data to provide flight deck and maintenance personnel with appropriate information for assessing the health of the aircraft. There will be both on-board (semi-realtime to realtime) and off-board functionality to this software. The work will include development of throughput/memory requirements, functionality requirements, technical performance measures, risk identification and mitigation, integration activities, and test development and execution. Experience in defining avionics systems requirements in DOORS is a requirement Experience in developing integration & test plans in a large scale, complex system is required. Experience with Agile development methodology is desired. Experience with the Atlassian tool suite is desired. Experience with aircraft health management systems is desired. Experience with subsystem fault detection and reporting is desired. Experience developing systems in a geographically dispersed environment is desired.

Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

ACS Group (formerly 'Comforce')
 
Job Number: EEMO
Job Location: Berkeley, MO
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 12+ Months
Start Date: ASAP
Input Date: 03/06/2018
Last Updated: 03/23/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer - Secret Clearance

Description:
***Must have Active Secret Clearance***



Major purpose:

The Aero Software Engineer is responsible for designing, developing, integrating and test of high fidelity, scalable, physics-based Aerodynamics Software models for Real-Time simulation training applications. Responsibilities also include troubleshooting and fixing existing software discrepancies in a variety of aerodynamic subsystems such as: engines, flight controls, control loading, motion, and aircraft systems.



Major functions:

" Provide aerodynamic software design, development and integration support on a variety of simulator programs for both helicopter and fixed wing platforms

" Support peer reviews for aero software solutions

" Troubleshoot pre-existing software discrepancies within the aero domain

" Support testing activity both in the lab and on the simulator to include flight test matching, qualification test guide (Client) analysis and certification testing

" Ability to work with a variety of aero subsystems and understand the interactions with other simulator subsystems

" Ability to work tasks to completion with minimal guidance



Education/Required Experience


" B/S in Aerodynamics, Physics, Mathematics or equivalent experience with an emphasis on software

" Minimum of 8 years of aerodynamic engineering technical experience

" Minimum of 8 years experience in software development with C/C++, Fortran, and/or Ada

" Experience developing in a Unix or Linux operating system environment

" Experience working with FAA Level \'D\' fidelity requirements is desired

" Proficiency with Matlab SimuLink is a plus

" Systems integration experience

" Good computer skills including working knowledge of Microsoft Office

" Must exhibit strong problem-solving skills

" Strong communication skills and good team work



 
Job Number: 18-03647
Job Location: Arlington, TX
Rate: 65.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2018-08-12 00:00:00.0
Start Date: 2018-02-12 00:00:00.0
Input Date: 01/25/2018
Last Updated: 03/30/2018
Firm Name: NESCO RESOURCE
Attention: Sebastian Hernandez
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer - Data Integrity

Description:
UNIQUE SKILLS
This is a Data Integrity Engineer in Structural/Mechanical Engineering for Completions Engineering. Responsibilities primarily involve reviewing engineering designs of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft. Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, entertainment equipment installations, and seating installations. The Data Integrity Engineer will review design work created using either AutoCAD or CATIA V5 and will ensure design standards are consistent with company standards and accepted design methods. Assignments are executed under the direction of the Structural/Mechanical Engineering Lead engineer or Group Head to meet the manufacturing schedule. Additional responsibilities are out lined in the job description and as assigned. Aircraft completion experience desired. Catia V5 and AutoCAD experience required. SmarTeam experience desired. Strong knowledge of aircraft cabin interior mechanical design including cabinet fabrication, materials and processes is highly desired. Experience as a design engineer creating new data for completions of VIP aircraft is a plus.
 
Job Number: 18-810-122441
Job Location: Northcentral
Rate: OPEN
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 05/25/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer 3

Description:
Engineer 3

Location: Savannah, GA
Pay Rate: $58/hr - $60/hr
Duration: Long Term Contract
Shift: Not specified

Unique Skills:
-The ideal candidate will perform cabin configuration engineering and will have a background in electro-mechanical design and/or integration.
-Understanding of aircraft mechanical component integration along with basic electrical integration and application is highly preferred.
-Position will generate build list configuration and certification strategy for a complete aircraft cabin interior installation.
-Knowledge of business jet cabin interiors is highly desired.

Education and Experience Requirements:
Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Five (5) yrs in specific technical discipline or ten (10) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

Principle Duties and Responsibilities/Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering related field preferred. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 8162
Job Location: Savannah, GA
Rate: 58-60
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 03/07/2018
Last Updated: 03/14/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Interior Designer

Description:
Engineering Contractor

Location: Savannah, GA
Pay Rate: $54.76/hr - $56/hr
Duration: Long Term W2 Contract
Shift: First

Unique Skills:
-Design Engineer/Mechanical Engineering for Aircraft Cabin Interiors in Final Phase Completions.
-Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft.
-Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations.
-Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis.
-Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
-Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam.
-Design Engineer will be required to liaison with the shop on engineering issues.

Design assignments include but are not limited to:
-Item Installation Analysis
-Similarity Analysis
-Configuration Analysis Design engineer will employ design standards consistent with company standards and accepted design methods executed under the direction of the Mechanical engineering Group Head to meet aircraft delivery schedule.

Education and Experience Requirements:
High school diploma or GED
 
Job Number: 8552
Job Location: Savannah, GA
Rate: 54.76 - 56
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 03/07/2018
Last Updated: 03/21/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Entry Level Aviation Quality Inspectors - Melbourne, FL

Description:
STS AeroStaff Services is hiring Entry Level Aviation Quality Inspectors in Melbourne, Florida.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Summary:

Inspect aircraft assembly activities and products for conformance with government and company standards and specifications. Report deviations and support preventive and corrective actions analysis aiming the delivery of products and services at their highest quality to customers.

Job Duties:

• Inspects the installation and operation of aircraft parts and equipment
• Inspects work areas and practices to detect potential unsafe conditions
• Read and understand the applicable technical information from Work Instructions, Drawings, Standards and Specifications
• Use of inspection tools and test equipment applicable to the activity
• Perform necessary work registers as requested by production and quality documents
• Prepare technical reports of quality deviations for engineering analysis
• Support process of preventive and corrective actions plan analysis

Education:

• H.S. Diploma or GED
• Desired: A.S. degree in Aviation
• Preferred: A&P License

Experience:

• Technician Role requiring basic skills to perform most of the standard tasks within the technical area assigned to
• Generally 0-3 years’ of experience in area of responsibility experience as an aircraft A&P Mechanic plus two years inspection experience in a production environment
• Desired: Prior Inspector work experience with aerospace quality systems that meet FAA requirements

Knowledge, Skills & Abilities:

• Ability to read technical documents and interprets the information - metric system
• Understand procedures, acting in problem solving, suggesting improvements
• Safety and operating procedures for power-on aircraft
• Application and use of precision measurement instruments and test equipment
• Team worker
• Logic thinking
• Detail oriented
• Employees will be subject to the random drug and alcohol testing under FAA regulations
• Will be subject to an annual vision test

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 41746
Job Location: Melbourne, FL
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 03/08/2018
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Entry Level IT Operations Analysts - Melbourne, FL

Description:
STS AeroStaff Services is hiring Entry Level IT Operations Analysts in Melbourne, Florida.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Summary:

To provide technical support to the Flight Ops’ Business Operations team. Develop and implement automations and software integration as needed. Take part in the implementation of policies, procedures, systems and tools in order to improve company’s efficiency and streamline processes.

Job Duties:

• Learn the Flight Operations’ invoice and others processes and develop various Automations as directed to assist with accuracy and speed of Data entry for the processes
• Create Software Integration and report automation as directed for process improvements and time and cost saving
• Connect different business software for data upload/download and sync using Programming Languages and other IT tools as necessary
• Database Creation and support for management of large amount of complex interrelated sets of data
• Write and/or update Standard Operating Procedures (SOPs) for all activities assigned
• Assist with specialized financial and cost analysis (e.g., usage, volume and variance analysis) and prepare related management reports
• Support the preparation of management reports
• Participate in the implementation and operation of company’s planning and reporting software (on ad-hoc basis or as part of structured projects)
• Assist with analysis and recording of a high volume of invoices and create various related reports
• Assist with the company lean and continuous improvement processes
• Assist with the implementation of policies and procedures
• Review financial and internal controls to determine whether such policies and procedures are adequate to meet management objectives and newer challenges
• Other Ad-hoc requests

Required:

• Software / Computer Degree with Business Experience and knowledge OR Bachelor's Degree with a major in Accounting, Finance or related Business area and programming experience and knowledge
• Ability to perform well under pressure, successfully completing tasks with deadlines
• Must be able to work well with others, strong interpersonal skills
• Able to work in a fast paced team environment with on the Job training
• Excellent time management, planning skills and attention to detail
• Strong Data Analysis and Interpretation ability
• Strong MS Excel skills are required and frequently used on the Job
• Must be able to effectively create and modify linked Cells, Ranges and Sheets
• Create and modify Conditional Formatting, Tables, Pivot Tables, Formulas, Various Charts and Pivot Charts
• Knowledge and/or Experience of Programming/Scripting languages and techniques for creating data entry automation and Software Integration
• Experience of Visual Basic, AutoHotkey, SAP GUI, Guixt, Access and SQL will be preferred
• Ability to perform transactional tasks accurately, while following established processes and guidelines with minimal supervision
• Knowledge of financial and analytical business principles, practices and procedures

Desired:

• Experience of Financial or Business Operations analysis
• Strong MS PowerPoint skills
• SAP familiarity
• MS SharePoint familiarity
• Experience of purchasing, order placement and dispute resolution
• MS Visio familiarity
• Adobe Acrobat (Writer) Pro familiarity; moderate JavaScript skills are a bonus
• Familiarity with SalesForce.com
• Experience in performing general admin support activities related to aircraft programs
• Experience of assisting or participating in a Lean and/or Continuous Improvement Program

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 41696
Job Location: Melbourne, FL
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 03/07/2018
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
FAA DER Stress Engineering Contractor

Description:
UNIQUE SKILLS
Airframe Stress Experience should include: static and fatigue analysis of primary and secondary airframe structure of metallic or composite construction in a product development environment, finite element modeling, understanding of certification requirements to FAR Part 25 and EASA CS. Job description: Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs. in the specific technical discipline or 10 yrs. broad engineering experience in several technical disciplines with Bachelors, or 3 yrs. in the specific technical discipline with Masters, or 1 yr. in the specific technical discipline with PhD. Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of client products and services

PRINCIPAL DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

ADDITIONAL FUNCTIONS
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

OTHER REQUIREMENTS
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 17-771-109481
Job Location: Southeast
Rate: $135.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 03/21/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

FEMAP FEA Analyst

Description:
Aircraft

Job location: Montreal, Quebec Canada
 
Job Location: Canada
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: sclark@advancedtechno.com
Website: www.advancedtechno.com

FEMAP FEA Analyst

Description:
Aircraft
 
Job Location: North Dakota
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: sclark@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Operations Research Analysts - Atlanta, GA

Description:
STS AeroStaff Services is hiring Flight Operations Research Analysts in Atlanta, Georgia.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Duties:

• Must work closely with Aircraft Maintenance Technicians on a daily 24 x 7 operation basis by determining parts requirements, utilizing technical manuals and documents such as IPC, CMM, MM, E.O.'s, ERA's.
• Using MIRS, originates and coordinates shop orders for in-house repair of removed parts from MRO Customers hangar and line aircraft.
• Must be able to prioritize & complete multiple tasks simultaneously.
• Must have considerable knowledge of most phases of the Maintenance operation, as well as material routing.
• Should have extensive knowledge of the ATA systems, and , SCEPTRE / SAP functionality as it relates to Inventory Management, as well as general knowledge of aircraft and engine systems.
• Makes inputs and generate daily reports on shortages and other technical problems requiring resolutions.
• Candidate should be highly motivated, self-directed, proactive, and have the ability to work effectively under pressure and time constraints.
• Practices safety-conscious behaviors in all operational processes and procedures

Qualifications:

• College graduate, A and P license, or equivalent experience in inventory management preferred.
• Should be able to master complex computer models and business processes.
• Prefer experience in aircraft record compliance, shop scheduling, warranty procedures, quantitative tracking and inventory control.
• Knowledge and understanding of inventory/supply chain/warehousing processes and procedures.
• Ability to analyze and understand technical manuals and documents.
• Should be able to interact comfortably with various levels of personnel in Maintenance and Materiel Management.
• Must be able to lift 70 pounds(very rare due to safety issues)

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 41683
Job Location: Atlanta, GA
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 03/05/2018
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

Industrial Engineer

Description:
General Summary:
The Industrial Engineer position provides technical support for the Production Engineering Group working in areas such as manufacturing, design, development, and testing.

Duties and Responsibilities:
  • Provides time studies, capacity analysis (manpower, tooling, capital, and facilities), line balancing, and crew loading, work sampling, and PC computer data analysis.
  • Establishes manpower requirements, line and sub-assembly balancing data, and expectancy time performances, headcount planning, and budgeting concepts.
  • Recommends improvements to manufacturing methods and processes including utilization of personnel, material, and utilities.
  • Collects and analyzes data and metrics and presents the information to large audiences.
  • Provides productivity planning with accompanying future strategies for improvement.
  • Develops and maintains engineered time standards.
  • Applies statistical methods and performs mathematical calculations to determine manufacturing assembly processes, labor requirements, and production standards.
  • Develops and maintains plant standards.
  • Creates and maintains valve stream maps.
  • Plans, schedules, and prioritizes work to meet established deadlines.
  • Drafts and designs layout of equipment, materials, and work centers to optimize material flow, labor efficiency, safety, quality, productivity, and ergonomics.
  • Determines and improves processes to meet production levels.
  • Schedules and sequences job plans (with ME approval) to support effective work flow.
  • Supports work specific to detail parts manufacturing and assembly operations of composite and metallic aerospace hardware within a manufacturing environment.
  • Develops documentation and procedures to ensure compliance specific to customer and regulatory production requirements and specifications.

Education, Work Experience, Certification and/or Licensure:
Bachelor’s Degree (Manufacturing, Manufacturing Engineering, Industrial Engineering, Aerospace Engineering, Industrial Technology, or equivalent technical major) required.
Experience in aerospace industry in aerospace manufacturing a plus.

Knowledge, Skills and Abilities:
  • Strong analytical and innovative skills.
  • Strong work ethic.
  • Ability to multitask.
  • Ability to work under minimal supervision.
  • Detail oriented.
  • Excellent problem solving skills.
  • Ability to read and interpret engineering drawing and/or specification requirements.
  • Excellent communication skills, both verbal and written.
  • Excellent presentation skills.


Physical Requirements:

  • Incumbents may be routinely exposed to equipment operational noise heat-cold-dust, and/or aircraft equipment, parts, or fuel odors.
  • Incumbents may be required to stand, sit, squat, walk, bend, move, reach, or stretch for prolonged time periods with no restrictions, as required by job duties.
  • Work in a safe and professional manner while adhering to all regulatory requirements (FAA, OSHA, DOT, EPA, State, and Federal regulations, etc.).
  • Read, hear, speak, and see with no restrictions, as required by job duties.
  • Comprehend and adhere to management directions and/or safety instructions with no restrictions.
  • Effectively communicate in Business English language.
  • Pull, push, carry, lift, or move items up to 10 lbs. throughout the work shift without assistance, as required by job duties.
  • Pull, push, carry, lift or move materials/people/items/equipment weighing up to 50lbs or more during the work shift, with the use of Company provided “reach assistance technology” or “movement assist technology” (fork-lifts, pallet jacks, pulleys, dolly’s, robotics reach equipment, people movers etc.), as required by job duties.   

 
Job Number: 1810082205
Job Location: Greensboro, NC
Duration: 12 months
Input Date: 03/05/2018
Last Updated: 11/14/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Lucinda Contreras
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002dz7iAAA&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Interior Design Engineer

Description:
• Interior design engineering for cabin & cockpit structures, components, and trim for aircraft.
• Serve as interface between design engineering, suppliers, and production departments.

Requirements:
• Engineering degree and minimum of 5 years applicable experience.
• CATIA V5 (or equivalent) 3D modeling and engineering drawing skills.
• Knowledge of aerospace materials, fasteners, and standards, as well as basic principles of design engineering including material selection and optimization for manufacturability, cost, and weight.
• Experience with design and installation drawings for aerospace interior components such as cabinets, seats, interior panels, trim, cargo liners, tables, pocket doors, and lavatories.

Preferred Qualifications:
• Knowledge of Part 23 & 25 certification process and regulations.
• Experience with interior design (styling), ergonomics/human factors, fabrication methods, mockups, assembly techniques, component testing, and vendor interface.
 
Job Number: 28-019
Job Location: Greensboro, NC
Rate: $50 - $60
Per Diem: Yes
Overtime: Yes
Duration: 1 year plus
Start Date: ASAP
Input Date: 02/28/2018
Last Updated: 04/11/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Interior Design Engineer

Description:
General Summary:
The Interior Design Engineer will perform interior design engineering for cabin & cockpit structures, components, and trim for aircraft. The individual will also on occasion support tasks associated with interior Installations.

Duties and Responsibilities:
1. Creates conceptual designs for interiors of the aircraft through 3D modeling software, drawings, and/or drafting application.
2. Develops designs for form/fit/function to meet customer and design criteria.
3. Provides designs for the fabrication process including sheet metal, extrusions and inject molding
4. Validates engineering designs per engineering core principles, design standards, processes and industry best practices.
5. Makes recommendations to engineering lead/management.
6. Researches and maintains up to date knowledge of technical data pertaining to cabin, cockpit structures, hardware, material, and finishes.
7. Ensures adherence to program schedule.
8. Performs other duties as assigned.

Education, Work Experience, Certification and/or Licensure:
1. 3+ years of engineering experience with at least three years of design engineering experience directly related to mechanical/interior design for commercial aircraft.

Knowledge, Skills and Abilities:
1. Working knowledge of conceptual design development of aircraft interiors.
2. Working knowledge of industry standard (i.e. - parts lists, bill of materials, parts and standards callout, etc).
3. In-depth knowledge of Geometric Dimensioning and Tolerancing (GD&T).
4. Familiarity with 14CFR Part 23/25.
5. Proficiency in CATIA V5 workbenches or equivalent 3D modeling tools (i.e. - Solidworks, Unigraphics, etc).
6. Proficiency in Teamcenter (or equivalent PLM tool).
7. Ability to work independently or within a team environment.
8. Ability to communicate effectively throughout all levels within an organization and present data clearly and concisely.
9. Ability to work cross functionally with Quality and Production to resolve issues on the production line.


Physical Requirements:
1. Incumbents may be routinely exposed to equipment operational noise heat-cold-dust, and/or aircraft equipment, parts, or fuel odors.
2. Incumbents may be required to stand, sit, squat, walk, bend, climb ladders, move, reach, or stretch for prolonged time periods with no restrictions, as required by job duties.
3. Work in a safe and professional manner while adhering to all regulatory requirements (FAA, OSHA, DOT, EPA, State, and Federal regulations, etc.).
4. Read, hear, speak, and see with no restrictions, as required by job duties.
5. Comprehend and adhere to management directions and/or safety instructions with no restrictions.
6. Effectively communicate in Business English language.
7. Pull, push, carry, lift, or move items up to 10 lbs. throughout the work shift without assistance, as required by job duties.
8. Pull, push, carry, lift or move materials/people/items/equipment weighing up to 50lbs or more during the work shift, with the use of Company provided “reach assistance technology” or “movement assist technology” (fork-lifts, pallet jacks, pulleys, dolly’s, robotics reach equipment, people movers etc.), as required by job duties.


The Structures Company is an AA/EOE.
 
Job Number: 144
Job Location: Greensboro, NC
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 03/26/2018
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MRB Engineer - Mechanical Systems

Description:
General Summary:
The Engineer for Liaison/MRB reviews defects and establishes root cause, provides an acceptable disposition to repair the discrepant condition using engineering principles and determines if a corrective action required for mechanical systems.

Duties and Responsibilities:
1. Resolves complex engineering problems related to the build of the aircraft.
2. Reviews defects and establishes root cause, provides an acceptable disposition to repair the discrepant condition using engineering principles and determines if a corrective action is required.
3. Reviews Engineering documentation (drawings, test procedures, and discrepancy tags) to enable technicians to understand the documents and continue working.
4. Reviews, develops, and implements revised/new processes using six sigma/lean principles.
5. Provides an acceptable disposition of non-conformance of commercial mechanical systems encountered during Manufacturing/Assembly process and production, including reporting of failures, malfunctions, and defects.
6. Documents how to repair the discrepancy using engineering principles.
7. Assists in determining if defects are Engineering related or workmanship issues. Documents defect findings.
8. Ensures that the proposed repair is equivalent to the Blueprint design or will not affect systems functionality.
9. Incorporate design changes using CATIA V5.

Education, Work Experience, Certification and/or Licensure:
1. Bachelor's degree in Engineering or related field of study.
2. Minimum of 6 years to a maximum of 20 years’ experience in the engineering field.
3. 6 years’ experience serving as a Liaison for MRB Mechanical Systems is preferred.
4. Computer proficient with experience in Microsoft Office Programs (SAP a plus).
5. Excellent written and oral communication skills.
Knowledge, Skills and Abilities:
1. Strong oral and written communication skills.
2. Strong analytical skills.
3. Strong interpersonal skills. Ability to interact with all levels of the organization.
4. Detail oriented.
5. Strong organizational skills and ability to multitask.
6. Extensive experience with Six Sigma.
7. Advanced knowledge of Mechanical Systems concepts, CATIA V5, and Standard Repair Methods (SRM).

The Structures Company is an AA/EOE.
 
Job Number: 155
Job Location: NC
Duration: 9+ Month
Start Date: March 2018
Input Date: 03/08/2018
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Machine & Tool Designer (Secret Clearance)

Description:

Active Secret Clearance REQUIRED


USPRO is woman-owned and operated contract staffing agency that places talented individuals nationwide in the following industries: Aerospace & Defense, Manufacturing & Healthcare. Learn more at www.uspro.net ____________________________________________________________________


Responsibilities include but are not limited to the following: 



  • Develop tooling and machine design concepts and support Tool and Machine Design Engineers in creating 3D models and drawings in TcUA (Product lifecycle management system) 

  • Insure models and drawings meet all department standards and customer requirements. 

  • Present models and drawings in design reviews to ensure safety, quality, delivery, cost objectives and customer satisfaction with design from all team members. 

  • Manage multiple projects and customers while creating efficient designs to meet the program cost and schedule requirements. 

  • Work with internal customers to concept needed support equipment for new and existing programs. 

  • Work closely with Tool and Machine Design Engineers to create final drawings and meet design costs and schedules. 


 


Requirements: 



  • 4 year BS Design and Drafting or equivalent experience 

  • Working knowledge of GD&T. 

  • Familiar with machine design and aircraft tooling. 

  • Experience with model checking for accuracy and model integrity. 

  • Experience with creating drawings. 

  • CATIA V5, TcUA, NX or other 3D modeling software a plus. 


 


 

















Compensation



Benefits



Diversity/EEO



The mentioned pay rate range for this opportunity is the 'target' range set by our client. Although USPRO presents candidates to our clients regardless of what their compensation demands are, the higher your rate is above this range, the lower the chance is for consideration



401K Retirement Plan & Medical Insurance is available for candidates who qualify



USPRO is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees!




 


 













Partial Aerospace & Defense Client List



BAE Systems


Gulfstream Aerospace


Moog Inc.


Sikorsky Aircraft - Lockheed Martin


Orbital ATK


Rockwell Collins


Spirit AeroSystems




 
Job Number: O6820283
Job Location: Clearfield, UT
Rate: 40-50
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 05/30/2018
Last Updated: 06/08/2018
Firm Name: NESC STAFFING
Attention: Brad McInnis
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
Phone: 603/431-9740
800 Phone: 800/562-3463
Fax Phone: 800/637-2562
Website: www.nesc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Maintainability Engineer

Description:
Position Purpose:
Responsible for participating in the planning, development, and sustainment of Aircraft Maintenance Programs and related issues regardless of complexity.

Unique Skills:
• Prior experience in development of Maintainability Predictions and analysis per MIL-HDBK-472, Human Engineering Design Guidelines per MIL-HDBK-759, Mean-Time-To-Repair (MTTR), assessing aircraft modifications for Maintainability impacts, CATIA V5 including Human Builder & Kinematics, and Reliasoft reliability & maintainability software are desired.
• Candidates with prior US military aircraft maintainer or air crew experience strongly preferred.

Education and Experience Requirements:
• Bachelor’s degree in aviation maintenance, engineering technology, or a related curriculum; or an equivalent combination of education and experience sufficient to perform the essential functions of the job. A&P license preferred.
• Six (6) years of Maintenance Programs/Maintainability experience or aircraft maintenance and operational experience.

Principal Duties and Responsibilities:
• Share responsibility for planning, developing, and sustainment of new and existing Aircraft Maintenance Programs and engineering projects of major complexity within established scope, meeting requirements of FAR 25.1529 or other applicable regulatory directives.
• Maintain a current knowledge of developments in the field of specialty and/or other related aircraft fields and provide recommendations to department management for process/procedure changes to prepare for new standards and implementation of new methodologies.
• Meet cost and schedule requirements while ensuring accuracy and consistency.
• Develop standards and guides to support Maintenance Programs activities.
• Mentor other team members in areas relative to Maintenance Programs processes and procedures.
• Engage with internal/external stakeholders to ensure department deliverables are being met or exceeded.
• Recommend innovations that improve collaboration, communication, quality, and/or effectiveness of product.
• Review, and provide feedback on written work of team members.
• Demonstrated in-depth knowledge of MSG-3 and Maintenance Review board (MRB) processes and methodology.
 
Job Number: 24-219
Job Location: Savannah, GA
Rate: $58 - $63
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 02/22/2018
Last Updated: 03/06/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Provide technical support for the Production Engineering Department. The Engineer must be able to develop documentation and procedures to ensure compliance specific to various company policies and procedures.

Duties and Responsibilities:
1. Audits and recommends improvements to the effectiveness and efficiency of the Production Engineering Department’s procedures and processes.
2. Manages and supports the implementation of enhancements to procedures, processes and operating tools.
3. Serves as a Liaison with various external departments for progress and maintenance of processes while ensuring they align with all other relevant procedures and communicate awareness of changes.
4. Interfaces with multiple functional groups including: Systems Architects, Supply Chain, Quality and Production Operations to develop strategies for implementation of engineering, system, and process improvements.
5. Identifies opportunities for improvement and standardization; documents and prepares initiatives for process and/or engineering change to reduce cost and increase quality.
6. Participates in activities to enhance and support HACI Production teamwork, and provide an environment for all team members to participate in CI (Continuous Improvement).
7. Provides technical support and assistance with the development and improvement of methods, quality product design, cost, and technical issues of a complex manner as required.
8. Analyzes a variety of engineering data to help determine requirements to meet objectives.
9. Plans and documents various installation processes, tooling, equipment and quality control methods to optimize the manufacturing operation.
10. Provides data comparisons between the Engineering Bill of Materials (EBOM) to the Manufacturing Bill of Materials (MBOM), Engineering Bill of Materials (EBOM) to the “As Built”.

Education, Experience, Certification and/or Licensure:
1. Bachelors' degree in Manufacturing Engineer or other related field strongly preferred.
2. In lieu of education one year of direct aircraft experience potentially may be substituted for each year of college.
3. 5+ years experience in aerospace industry in aerospace manufacturing.
4. Six Sigma Training (Minimum Green Belt Certification – highly preferred).

Knowledge, Skills and Abilities:
1. Strong analytical skills.
2. Ability to read and interpret engineering drawings and/or specifications requirements.
3. Excellent oral and written communication skills.
4. Excellent problem solving skills.
5. Ability to work in a diverse environment.
6. Excellent communication and presentation skills.
7. Some experience utilizing tools such as SAP, CAD CAM, CATIA, Microsoft Office Suites (Word, Excel, PowerPoint, Project and Lotus Notes).
8. Ability to multitask.
9. Strong organizational skills.
10. Working knowledge of aircraft assembly, sequencing and manufacturing flow.
11. Working knowledge of or exposure to Lean Manufacturing tools.
 
Job Number: 28-018
Job Location: Greensboro, NC
Rate: DOE
Per Diem: YES
Overtime: YES
Duration: 1 YR+
Start Date: ASAP
Input Date: 02/22/2018
Last Updated: 05/29/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

Manufacturing Engineer

Description:
CATIA, aircraft systems
 
Job Location: Southeast
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: sclark@advancedtechno.com
Website: www.advancedtechno.com

Manufacturing Engineer

Description:
Aircraft experience, CATIA V5
 
Job Location: Midwest
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: sclark@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer (PWA and LRU Assembly) CA

Description:
13701

Title TEMP Staff Manufacturing Engineer (PWA and LRU Assembly)
Job Summary General Atomics Aeronautical Systems, Inc. (GA-ASI), an affiliate of General Atomics, is a world leader in proven, reliable remotely piloted aircraft and tactical reconnaissance radars, as well as advanced high-resolution surveillance systems.

We recognize and appreciate the value and contributions of individuals with diverse backgrounds and experiences and welcome all qualified individuals to apply.

Support the design (DFM), first article, production, test, and system integration of Printed Wiring Assemblies and Line Replaceable Units for all UAV platforms including Ground Control Stations (GCS). Assemblies will include surface mount as well as through hole technology and mechanical assembly.

Duties and Responsibilities •Responsible for manufacturing process development, implementation, and continuous improvement to enhance Quality / Yield, reduce Cost, and improve Productivity / Schedule. Initiate and lead lean manufacturing process improvement projects.
•Specify and implement automation equipment and processes.
•Identify and assist in addressing safety issues on the manufacturing floor.
•Support manufacturing production planning and coordination, execution and operations process development.
•Provide production support to assemblers and leads.
•Document manufacturing processes and assembly work instructions in conjunction with T&O Planning.
•Design shop aids and tooling to assist production.
•Disposition non-conforming parts, identify root cause, and implement corrective and/or preventive action to reduce scrap and rework.
•Collaborate with Design Engineering during prototype, development and first article manufacturing.
•Expertise in assembly methods and processes, including surface mount technology, through hole technology, mechanical assembly, and testing. Experience in both analog and digital technologies as well as a background with RF.
•Experience with development and deployment of manufacturing automation and remaining current with technology.
•Experience with Electrical Schematics and Circuit Diagrams; Drawings and BOMs; Assembly Instructions; Engineering Change systems; Quality systems for non-conforming parts and corrective action. Experience with Lean Manufacturing methodologies for waste reduction, e.g.: 5S, Standard Work, TAKT, Pull System, 5S, Value Stream Mapping, cell design, and manufacturing flow.
•Clearly and effectively communicate both verbally and in written form to both technical and non-technical audiences, especially regarding manufacturing processes, engineering issues and proposed changes, and quality issues and dispositions.

Qualifications Essential Qualifications Typically requires a bachelors degree, masters degree or PhD in engineering or a related technical discipline from an accredited institution and progressive engineering experience as follows; nine or more years of experience with a bachelors degree, seven or more years of experience with a masters degree, or four or more years with a PhD. May substitute equivalent engineering experience in lieu of education. Demonstrates an extensive technical expertise and application of engineering principles, concepts, theory, and practice with the ability to organize, plan, schedule, conduct, and coordinate workloads to meet established deadlines or milestones with some experience in project leadership. Must possess the ability to understand new concepts quickly and apply them accurately throughout an evolving environment. Strong communication, presentation, and interpersonal skills are required enabling an effective interface with other departments and/or professionals, and capable of representing the organization as a prime technical contact, as well as providing leadership and guidance to less experienced professionals. Customer focused, formulates plans based on the development of innovative new designs in resolving advanced technical engineering problems. Must be able to work both independently and in a team environment. Able to work extended hours as required. A Professional Engineering License, original work(s) published in professional engineering journals, and invited to present one or more original works to an engineering symposium are desirable.
Additional Qualifications Typically requires a bachelors degree, masters degree or PhD in engineering or a related technical discipline from an accredited institution and progressive engineering experience as follows; four or more years of experience with a bachelors degree or two or more years of experience with a masters degree.
•Experience with IPC & MIL standards, including: IPC/WHMA-A-610 and 620 , J-STD-001 – Requirements for Soldered Electrical and Electronic Assemblies, MIL-STD-1553 – Digital Time Division Command/Response Multiplex Data Bus, MIL-STD-1760 – Aircraft Electrical Interconnection System, SAE-AS39029 (MIL-C-39029)– Experience implementing capital equipment in factory environment.
•Experience with MRP systems, eg SAP or MTO/WDS. Experience with Microsoft Office Project and Visio.
•Experience with programming.
•Experience with databases, e.g. Oracle and FileMaker. Knowledge of SQL.
•Experience with process mapping and demand flow technology
•Strong background in electro-mechanical assemblies.
•Six Sigma Green Belt
City San Diego
State California
Travel Percentage Required 0% - 25%
Clearance Required? No
Work Schedule Rule 9/80
Temp Assignment Duration (# of Days) 180
 
Job Number: JE-13701
Job Location: San Diego, CA
Duration: 6 month contract
Input Date: 03/05/2018
Last Updated: 03/12/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer - Aerospace and Defense

Description:
Ingenium Technologies - San Diego, CA



A Manufacturing Engineer is needed for a proven and reliable world leader in Aviation Air-to-Ground Communications, Aircraft Systems and Tactical Reconnaissance Radars, as well as advanced high-resolution Surveillance Systems. This individual will support the design, production, test, and system integration of Printed Wiring Assemblies and Line Replaceable Units for all aircraft platforms.





Additional Job Postings: http://www.ingeniumtech.com/tech_staffing/



Responsibilities will include but not be limited to:



Support the design, production, test, and system integration of Printed Wiring Assemblies and Line Replaceable Units for all aircraft platforms.
Responsible for manufacturing process development, implementation, and continuous improvement to enhance Quality / Yield, reduce Cost, and improve Productivity / Schedule. Initiate and lead lean manufacturing process improvement projects.

Specify and implement automation equipment and processes.

Identify and assist in addressing safety issues on the manufacturing floor.

Support manufacturing production planning and coordination, execution and operations process development.

Provide production support to assemblers and leads.

Document manufacturing processes and assembly work instructions.

Design shop aids and tooling to assist production.

Disposition non-conforming parts, identify root cause, and implement corrective and/or preventive action to reduce scrap and rework.

Collaborate with Design Engineering during prototype, development and first article manufacturing.

Expertise in assembly methods and processes, including surface mount technology, through hole technology, mechanical assembly, and testing.

Experience in both analog and digital technologies as well as a background with RF.



Software Requirements:

MRP systems, eg SAP or MTO/WDS. Experience with Microsoft Office Project and Visio.
Databases, e.g. Oracle and FileMaker. Knowledge of SQL.


Required Experience:

5 to 15 Years experience in aerospace manufacturing, processing and materials knowledge.
Background in Printed Wiring Assemblies and Line Replaceable Units.
Expertise in assembly methods and processes, including surface mount technology, through hole technology, mechanical assembly, and testing.
Experience in both analog and digital technologies as well as a background with RF.
Experience with development and deployment of manufacturing automation and remaining current with technology.
Experience with Electrical Schematics and Circuit Diagrams; Drawings and BOMs; Assembly Instructions; Engineering Change systems; Quality systems for non-conforming parts and corrective action.
Experience with Lean Manufacturing methodologies for waste reduction, e.g.: 5S, Standard Work, TAKT, Pull System, 5S, Value Stream Mapping, cell design, and manufacturing flow.
Experience with IPC & MIL standards, including: IPC/WHMA-A-610 and 620 , J-STD-001 – Requirements for Soldered Electrical and Electronic Assemblies, MIL-STD-1553 – Digital Time Division Command/Response Multiplex Data Bus, MIL-STD-1760 – Aircraft Electrical Interconnection System, SAE-AS39029 (MIL-C-39029)– Experience implementing capital equipment in factory environment.
Experience with process mapping and demand flow technology
Strong background in electro-mechanical assemblies.
Six Sigma Green Belt preferred.
Required Education: Bachelor's degree preferred not required.



Position: Direct Hire



Location: San Diego, CA



Employment Criteria : This position includes access or potential access to ITAR technical data. Therefore, candidates will need to qualify as a US Citizen, who does not work for a foreign company/foreign government/foreign governmental agency or organization, and is in compliance with International Traffic in Arms Regulations.



Employment Statement: Ingenium Technologies is an equal opportunity employer and does not discriminate on the basis of race, color, religion, sex, age, national origin, disability, veteran status, sexual orientation or any other classification protected by federal, state or local law. Proof of eligibility for employment will be required upon employment.

Due to the requirements of the Customer, No Visa sponsorship is available.
 
Job Number: 120164
Job Location: San Diego, CA
Rate: 80-95k/yr
Per Diem: no
Overtime: no
Duration: Direct Hire
Start Date: asap
Input Date: 03/07/2018
Firm Name: INGENIUM TECHNOLOGIES
Attention: Alvin
Address: 4216 MARAY DR UNIT A1
City, State: ROCKFORD, IL 61107
Phone: 815/399-8803 X255
Fax Phone: 815/399-8804
Website: www.ingeniumtech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Location: Savannah, GA
Rate: $50.00/HR
Duration: Long Term contract
Shift: 1st Shift


Unique Skills:
Experience writing manufacturing work instructions and creating bill of materials for aircraft manufacturing.

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 7979
Job Location: Savannah, GA
Rate: $50.00/HR
Per Diem: Possible
Overtime: Possible
Duration: LT
Input Date: 03/07/2018
Last Updated: 05/07/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Savannah, GA
Rate: $50-$55
Long Term contract
1st Shift



Unique Skills:
Knowledgeable with CATIA, SAP, Solumina software programs. Aircraft experience with aircraft shop support and creating work instructions.


Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.


Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 8217
Job Location: Savannah, GA
Rate: $50.00 -$55.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 03/21/2018
Last Updated: 04/24/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
UNIQUE SKILLS
Solumina, CATIA and SAP preferred. Prefer prior experience on live aircraft and/or in environment of aircraft reconfiguration.

EDUCATION AND EXPERIENCE REQUIREMENTS
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.


POSITION PURPOSE
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

PRINCIPLE DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. Author DRDI/DMT rework instructions to support effective corrective actions. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
4. Investigate and assist in preparing justification for equipment and facility requests.
5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for manufacturing assessments with Engineering.
6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures.
8. Incorporate Lean Manufacturing Methodology into existing and future processes.
9. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations.
10. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
11. Support all Safety, Sustainability and Ergonomic Initiatives.
12. Aid in development and maintenance of Business Continuity Plan.

ADDITIONAL FUNCTIONS
1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality.
2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

OTHER REQUIREMENTS
1. Proven knowledge of Lean and/or Six Sigma principles.
2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 17-752-105442
Job Location: Southeast
Rate: $55.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 02/28/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer Planners - Greensboro, NC

Description:
STS AeroStaff Services offers Manufacturing Engineer Planner jobs in Greensboro, North Carolina.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Summary:

The Manufacturing Engineer - FTP is responsible for all manufacturing engineering aspects of defining, creating, and maintaining written FTP documents to include defining tooling, equipment, test equipment, and procedures for producing and testing aircraft at the client facility.

Duties and Responsibilities:

• Review and approve all Engineering drawings and models for assigned A/C areas, ensuring parts, assemblies, and/ or installations are manufacturable
• Define, review, and approve all FT requirements creating, maintaining, and writing FTP documents
• Define, review, and approve all FT tooling, equipment, and test equipment
• Manage all Design for Manufacturability Requests for assigned A/C area(s) reviewing/ creating and approving all internal and external submissions
• Review and approve all CR’s (Change Requests) to determine positive/ negative impacts to Production by coordinating with the various departments within client
• Review major Engineering and/or router changes with shop floor at the start of the respective Position and/ or at each Block Point change
• Create/ revise Master Routers for new/ revised Engineering for assigned A/C areas

Education, Work Experience, Certification, and/or Licensure:

• B.S.M.E., B.S.A.E., B.S.I.E., or B.S. Mfg. Eng./ Eng. Tech. preferred, but not required
• 10+ years’ of experience performing, defining, and testing aircraft with complex functional systems including mechanical and fly-by-wire systems
• A combination of experience and education is acceptable

Knowledge, Skills, and Abilities:

• Must have knowledge of, but not limited to:
o Mechanical/ electrical rigging and troubleshooting of flight controls, landing gear, and hydraulics
o Loading and verification of airborne software
o Installing and troubleshooting avionics systems including TCAS, Radar, AFCS, FADEC, etc.
o Ability to review 3D drawings and models for Engineering designs and specifications to ensure manufacturability and process capabilities
• Working knowledge of computer systems, programs, etc. including, but not limited to, the following:
o CATIA V5/ V6 experience is a plus.
o Experience programming robotics a plus.
o Router/ Work Instruction Creation and Maintenance in an advanced ERP/MRP system.
o SAP experience is a plus.
o Teamcenter Manufacturing/ Process Planning creating MBOM’s and BOP’s is a plus.
• Proven ability to trouble-shoot defects, manufacturing errors, and time consumption/ learning curve issues to improve shop floor performance.
• Ability to analyze a variety of engineering data to help determine how to meet company objectives
• Program/Project management experience as a Mfg. Engineer:
o Experience with Program/ Project management in a fast paced work environment having reported progress to peers, direct supervision, and upper management with experience in plant floor scheduling, creating project files, Gantt charts, process flow charts, track job progress, assign resources, etc.
o Proven capability to direct the work of other Mfg. Engineers to support the defined build sequence a must.
• Quality Engineering experience as a Mfg. Engineer:
o Proven ability to define inspection methods and criteria as well as interpret results to drive processes per Six Sigma (or equivalent) standards.
o Six Sigma certification a plus.
o Strong knowledge of AS9102 processes, procedures, and methods a must with experience writing or creating a plus.
• Purchasing experience as a Mfg. Engineer:
o Ability to perform vendor cost analysis versus internal costs to determine best location for manufacturing.
o Experience in supplier selection and management including directing/ addressing supplier concerns from a technical standpoint.
o Ability to read and understand LTA’s, P.O.’s, T’s & C’s, etc. a plus.
• Motivated self-starter able to work under minimal supervision.
• Experience in an IPT (Integrated Product Team) format is a must with experience as a formal or informal leader a plus.
• Promote and contribute to overall team environment, harmony, etc. is a must.

Physical Requirements:

• Incumbents may be routinely exposed to equipment operational noise heat-cold-dust, and/or aircraft equipment, parts, or fuel odors
• Incumbents may be required to stand, sit, squat, walk, bend, move, reach, or stretch for prolonged time periods with no restrictions, as required by job duties
• Work in a safe and professional manner while adhering to all regulatory requirements (FAA, OSHA, DOT, EPA, State, and Federal regulations, etc.)
• Read, hear, speak, and see with no restrictions, as required by job duties
• Comprehend and adhere to management directions and/or safety instructions with no restrictions
• Effectively communicate in Business English language
• Pull, push, carry, lift, or move items up to 10 lbs. throughout the work shift without assistance, as required by job duties
• Pull, push, carry, lift or move materials/people/items/equipment weighing up to 50lbs or more during the work shift, with the use of Company provided “reach assistance technology” or “movement assist technology” (fork-lifts, pallet jacks, pulleys, dolly’s, robotics reach equipment, people movers etc.), as required by job duties


Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 39239
Job Location: Greensboro, NC
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 02/26/2018
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

Master Technical Training Instructor

Description:
PDS Tech is seeking a Master Technical Training Instructor


Under minimum supervision, research, assist in the development, organize and deliver training curriculum. Act as an internal consultant on training issues in areas of expertise. Support training as assigned at all Company and FlightSafety facilities. Support Lead Training Instructors and mentor other training instructors as required. 

Principal Duties and Responsibilities:

Essential Functions:
  1. Conduct classroom and practical training as requested at all Company and FlightSafety facilities. Training may include certification training for engine/APU qualifications, Aircraft Recurrent/Refresher Training, Familiarization Training, and System Line Maintenance Training on assigned aircraft or on assigned systems for employees and customers.
  2. Identify, research, and verify technical accuracy of information required for training course development. Monitor all applicable information sources to determine required changes to current training programs.
  3. Oversee the development of new or updated training programs. Report progress to lead instructor. Interface with engineering and other cognizant personnel while using engineering material/technical data (block diagrams, blueprints, test specifications, and reports) to determine training content. Working with other instructors, guide the projects/subjects that they are working on to make sure any training development project meets established milestones. Ensure established standards are upheld.
  4. Work with lead instructor to determine training needs and help determine the best approach to provide required training to the work-force and our customers (classroom, hands-on, CBT).
  5. Prepare all necessary training materials (course outlines, lesson plans, books, handouts, presentations, CBTs) needed to meet training objectives while maintaining established departmental, company, and training provider standards.
  6. As assigned, maintain technical expertise on existing Company products and acquire knowledge on new product designs from available sources, i.e. Engineering, Tech Ops, Pubs, etc.
  7. As assigned, obtain and maintain qualification to instruct in at least three subject areas (system, area or subject) and any associated simulator requirements.
  8. Schedule Aircraft Equipment resources as required for Practical Training.
  9. Prepare and coordinate technical data and training information as required for use in off-site training/seminar sessions.
  10. Develop and maintain Computer Based Training.
  11. Solicit, promote, and exhibit a spirit of teamwork between Company and FlightSafety. 


Additional Functions:
  1. Mentor Training Instructors as required and provide assistance in the development of their skills and abilities.
  2. Promote and ensure a safe training environment.
  3. Update training programs/records accordingly.
  4. Travel as necessary to conduct training.
  5. Performing other duties as required and/or assigned. 


Other Requirements:
  1. A&P, FCC, or Pilot License preferred.
  2. Instructor development training is required.
  3. If the instructor will be a member of the Company/FlightSafety Total Technical Training program, an FSI Master Technician Certification required.
  4. Expert user of PowerPoint, MSWord, and Lotus Notes.
  5. Ability to utilize media equipment.
  6. Ability to read/interpret blueprints and wiring diagrams.
  7. Ability to solve the problems between peers and subordinates.
  8. Must exhibit excellent verbal, written, and teaching skills.

Education and Experience Requirements:



Bachelors degree preferred or equivalent combination of education and experience.
Five to eight years experience in aviation industry, including relative Company experience.
Three to five years experience in training related area. 

Unique Skills:



Company Aircraft knowledge preferred. - Aircraft manufacturing and Repair Station knowledge and or experience preferred.


 
Job Number: 1710076327
Job Location: Savannah, GA
Duration: 12 months
Input Date: 10/24/2017
Last Updated: 11/14/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Rodney Kinlaw
Address: 900 CIRCLE 75 PKWY SE STE 600
City, State: ATLANTA, GA 30339
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000023NCMAA2&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical 2D and 3D Engineering Checker

Description:
Mechanical 2D and 3D Engineering Checker
Savannah, GA
Rate: $55-$63

Unique Skills:

Required Check 2D engineering data and 3D models for conformance to Company requirements as directed. Check parts for fit, form and function to the extent that information is available. Must have experience in Product Lifecycle Management (PLM) processes and tools, including checking CATIA v5 , SmarTeam, as well as other CAD datasets, in accordance to Company requirements as directed. Checkers are responsible for determining the acceptability of data in the following areas:
• Accuracy and completeness of engineering product definition data, including CAD and PDM data.
• Proper application and compliance with all Engineering and customer drawing requirements.
• Use and understanding of GD & T a must.
• Dimensioning and tolerancing including familiarity with ASME Y14.5.
• Application of best drafting and design practices and procedures.
• Applies extensive and diversified knowledge of industry fabrication practices for aircraft parts.
• Advise Design personnel regarding GAC drawing and design practices and procedures.
• Maintain a current and up-to-date knowledge of developments in the structures/systems design disciplines drawing/data requirements, as well as all interrelated disciplines of design build teams.
• Assist in the research and development of Product Data Management (PDM)/Computer Aided Design (CAD) applications and methodologies for Engineering and when necessary, other departments.
• Actively works to improve daily processes and ensure that all Data Integrity work and CAD and PDM solutions meet customer requirements.
• Knowledge of GAC parts list & PdocM, a plus. Essential Duties and Responsibilities
• Checks designs of complex mechanical aircraft interior furnishing, structures, and/or systems.
• Ensures designs meet customer criteria, quality standards and FAA requirements.
• Adheres to budget and project schedules.
• Provides design guidance and feedback to other engineering personnel.
• Other duties as assigned.
• Knowledge of industry design and documentation standards.
• Experience with mechanical assemblies and manufacturing technique design.
• Ability to work independently and cross-functionally.
• Experience in communicating with employees/teams in productive and efficient manner.
• Strong communication and problem-solving skills.


Education and Experience Requirements:

Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:

Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

Principal Duties and Responsibilities:

Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7821
Job Location: Savannah, GA
Rate: $55-$63
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 03/07/2018
Last Updated: 08/06/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Eng. - Simulation Equipment

Description:
Mechanical design, integration, test and production support of simulation equipment. Responsibilities include development of 3D models, detailed drawings and interfacing with manufacturing.

REQUIRED EXPERIENCE:
Prefer 4+ years of directly related experience.
Experience developing 3D models and detailed drawings
Ability to develop innovative solutions
Must have strong verbal and written communication skills with the ability to communicate complex issues to technical and non-technical audiences that include peers, management, and customers

PREFERRED EXPERIENCE:
Experience using SolidWorks and AutoCAD
Finite Element Analysis application experience
Familiarity with aircraft cockpit systems
Simulation equipment experience

EDUCATION:
BS in Mechanical Engineering or equivalent experience in an engineering discipline
 
Job Number: 169211
Job Location: Broken Arrow, OK
Rate: up to $34/hr
Per Diem: N/A
Overtime: Not specified
Duration: 6 mo
Start Date: ASAP
Input Date: 03/06/2018
Firm Name: CHIPTON ROSS
Attention: Terry
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer - Active Secret Clearance

Description:
Major purpose:

Mechanical design, integration, test and production support of simulation equipment.

Responsibilities include development of 3D models, detailed drawings and interfacing with manufacturing.



Additional Job Requirements:

Must have an existing, active Secret Security Clearance.

•BS in Mechanical Engineering or equivalent experience in an engineering discipline

•Prefer 4+ years of directly related experience

•Experience developing 3D models and detailed drawings

•Ability to develop innovative solutions

•Must have strong verbal and written communication skills with the ability to communicate complex issues to technical and non-technical audiences that include peers, management, and customers



Desired Qualifications

•Experience using SolidWorks and AutoCAD

•Finite Element Analysis application experience

•Familiarity with aircraft cockpit systems

•Simulation equipment experience

 
Job Number: 18-08279
Job Location: Broken Arrow, OK
Rate: 34.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2018-09-19 00:00:00.0
Start Date: 2018-03-19 00:00:00.0
Input Date: 02/28/2018
Last Updated: 06/01/2018
Firm Name: NESCO RESOURCE
Attention: Anthony Kees
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer - Level 2

Description:
Location: Fort Walton Beach, FL
Rate: $25.00 - $50.00/HR
Duration: 6 month contract
Shift: 1st Shift
Overtime: Exempt

*****MUST have an Active Secret Clearance or to have had one within the last 2 years*****

Description
Researches, plans, designs and develops mechanical products and systems such as instruments, controls, robots, engines, machines and mechanical, thermal hydraulic or heat transfer systems for production, transmission, measurement, and use of energy. Applies research to the planning, design, development, and testing of mechanical and/or electromechanical systems, instruments, controls, engines, and/or machines.

Skill/Experience/Education
Mandatory:
*****MUST have an Active Secret Clearance or to have had one within the last 2 years*****
Mechanical Engineer. A-Shift. On aircraft and off-aircraft operational requirements. Schedule In this role, the employee will review designs for ease of manufacturing and work closely with design engineering for improvements. The employee will use their knowledge of interpreting and reading engineering design drawings to develop fabrication routers/work instructions. This role will also require the employee to develop bill of materials (BOMs) based on drawing parts lists. The employee will work with manufacturing on issues and process improvements

Desired:
*****MUST have an Active Secret Clearance or to have had one within the last 2 years*****
Jobscope experience TeamCenter Engineering experience Production Engineering experience Production Operations experience Mechanical Experience Electrical Experience Aircraft Experience Experience with Lean Six Sigma practices SOF CLSS contract, facility, and customer knowledge Active Secret Security Clearance within the last 2 years. Ability to read and interpret engineering drawings. Excellent verbal and written communications skills
 
Job Number: 8661
Job Location: Fort Walton Beach, FL
Rate: $25.00 - $50.00/HR
Per Diem: Split Possible
Overtime: Exempt
Duration: 6 mos
Start Date: ASAP
Input Date: 02/21/2018
Last Updated: 04/13/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer / no clearance / Catia V5 / landing gear required CA

Description:
161335
Requirement# AERO-REQ-0759
Work Location Palmdale, CA (1011 Lockheed Way, Palmdale CA 93599)
Work Week 9/80-A
Priority High
Needed Date 02/28/2018
End Date 02/28/2019
Number of Resources 1
Security Clearance No Clearance
65-75/hr DOE

Title Mechanical Engineer
Description
This position is for a landing gear design engineer. A successful candidate will have a complete understanding of the principles and techniques of aircraft mechanisms, landing gear and structural design for advanced air vehicles. The candidate will coordinate efforts across a wide range of functional organizations, such as Quality Assurance, Planning, Tooling, Structural Analysis, Materials & Processes, Flight Sciences, Test and Manufacturing. Responsibilities for this position include: • Create conceptual layouts and preliminary designs of landing gear systems. • Create and maintain 3-D CATIA models, assemblies and installations, system requirements, interface/supplier control drawings, performance specifications, system checkout procedures and statements of work. • Create system requirements, trade studies, sub-component and flight test plans. • Coordinate with suppliers, internal and external integrated product teams. • Provide manufacturing, component test and ground/flight test support. • May function in a project leadership role managing the system performance, budget and schedule. Must be a US Citizen. This position is located at a facility that requires special access.
Skill/Experience/Education
Mandatory:

• Proficient with CATIA V5. • Experience in landing gear design
Desired:

• Bachelor’s Degree in an Engineering Discipline with 5 years of experience or Master's Degree in an Engineering Discipline with 3 years of experience
• Experience with GD&T (Geometric Dimensioning and Tolerancing)
• Experience in mechanism design
• Experience in airframe structure design
• Experience with hand stress analysis

Skill Matrix
Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory(Yes/No)
Catia V5 Proficient
4-5 Years Yes
Landing Gear Design Proficient
4-5 Years Yes

Interview Required Yes

OT Allowed Yes (OT Limitation: No)
Travel No
Non-Exempt
Rate TypePer Hour
 
Job Number: JE-0759
Job Location: Palmdale, CA
Rate: 65-75/hr DOE
Duration: 12 months
Input Date: 03/06/2018
Last Updated: 03/15/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer and 2D/3D Checking Engineering Contractor

Description:
UNIQUE SKILLS
Ideal Candidates will have mechanical engineering and 2D/3D checking experience with Aircraft Cabin Interiors and Systems to include but not limited to: - Seats - Galley - Lavs - LRU installations - Liners - Water System - Waste System - Mechanism design and validation - Prototype development Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs. in the specific technical discipline or 10 yrs. broad engineering experience in several technical disciplines with Bachelors, or 3 yrs. in the specific technical discipline with Masters, or 1 yr. in the specific technical discipline with PhD.

ESSENTIAL FUNCTIONS
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area.

OTHER REQUIREMENTS
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 17-723-102180
Job Location: Southeast
Rate: $58.00 to $63.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 02/28/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer with active Secret Clearance / Catia V5 CA

Description:
160781
Requirement#AERO-REQ-0722
Work LocationPalmdale, CA (1011 Lockheed Way, Palmdale CA 93599)
Work Week9/80-A
PriorityHigh
Needed Date01/02/2018
End Date12/21/2018
Number of Resources1
Security ClearanceSecret (Prime Contract:re-investigation within the past 5 years (P-29 ), Can start w/o clearance:No, Interim Clearance Sufficient:No)


TitleMechanical Engineer-N
Description
This position is for a mechanism and landing gear design engineer. A successful candidate will have a complete understanding of the principles and techniques of aircraft mechanisms, landing gear and structural design. The candidate will coordinate efforts across a wide range of functional organizations, such as Quality Assurance, Planning, Tooling, Structural Analysis, Materials & Processes, Flight Sciences, Test and Manufacturing. Responsibilities for this position include: • Create and maintain 3-D CATIA models, assemblies and installations, system requirements, interface/supplier control drawings, performance specifications, system checkout procedures and statements of work. • Create system requirements, trade studies, sub-component and flight test plans. • Coordinate with suppliers, internal and external integrated product teams. • Provide manufacturing, component test and ground/flight test support. • May function in a project leadership role managing the system performance, budget and schedule. Must be a US Citizen. This position is located at a facility that requires special access.
Skill/Experience/Education
Mandatory:

• Must have a secret clearance with an investigation within the last 5 years to start. • Proficient with CATIA V5. • Experience in mechanism design • Experience in structural design
Desired:

• Bachelor’s Degree in an Engineering Discipline with 5 years of experience or Master's Degree in an Engineering Discipline with 3 years of experience Experience with GD&T (Geometric Dimensioning and Tolerancing)
• Experience with hand stress analysis
• Excellent writing and communication skills

Skill Matrix
Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory(Yes/No)
Catia V5 Proficient
4-5 Years Yes
Structural Design Proficient with aircraft structural design of composite and metallic part
4-5 Years Yes


Interview RequiredYes

OT AllowedYes (#hours allowed: 20, Pre-Approval Reqd.:Yes)
TravelNo
Non-Exempt
Rate TypePer Hour

Rates
0-4 YrsPay Rate: 65.00 USD
5-8 YrsPay Rate: 70.00 USD
9+ YrsPay Rate: 75.00 USD
 
Job Number: JE-0722
Job Location: Palmdale, CA
Rate: 65-75/hr DOE
Duration: 12 month contract
Input Date: 03/21/2018
Last Updated: 03/27/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Systems MRB Engineer

Description:
Mechanical Systems MRB Engineer (Production & Test Aircraft Support - TS II)

Location: Savannah, GA
Rate: $59.00 - $62.00/HR
Long Term Contract Position


Unique Skills:
- Ideal candidate will have previous experience with Engineering MRB, trouble shooting, disposition and repair of aircraft defects, return to service requirements, and/or flight squawk support, while working in an environment like a Production Facility, Flight Test, a Service Center, or Outside Operational Support.
- Strong design background and/or qualification experience is a plus.
- A skilled Mechanical Systems Engineer that is familiar with aircraft systems (including but not limited to): Power Plant/ECS, Landing Gear, Hydraulics, Flight Controls, Doors, Waste & Water, O2, Equipment installation, Secondary Structure.

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

Principle Duties and Responsibilities:
Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 7261
Job Location: Savannah, GA
Rate: $59.00 - $62.00/HR
Per Diem: Yes
Overtime: Possible
Duration: LT
Input Date: 05/17/2018
Last Updated: 07/18/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Systems MRB Engineer

Description:
Unique Skills:
Ideal candidate will have previous experience with Engineering MRB, trouble shooting, disposition and repair of aircraft defects, return to service requirements, and/or flight squawk support, while working in an environment like a Production Facility, Flight Test, a Service Center, or Outside Operational Support. Systems design and/or qualification experience is a plus. A skilled Mechanical Systems Engineer that is familiar with aircraft systems (including but not limited to): Landing Gear, Power Plant/ECS, Hydraulics, Flight Controls, Doors, Waste & Water, O2, Equipment installation, Secondary Structure.

Education and Experience Requirements:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of products and services

Principal Duties and Responsibilities:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
 
Job Number: 24-143
Job Location: Savanah, GA
Rate: $59 - $62
Per Diem: YES
Overtime: YES
Duration: 1 YR+
Start Date: ASAP
Input Date: 02/22/2018
Last Updated: 06/22/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Metals Mechanic (KS)

Description:
Team with others to fabricate, assemble, form, finish and inspect a wide variety of structural and non-structural metal parts, tools and assemblies to assure the timely production and delivery of quality products to the customer.

Work from drawings, documents, process specifications, quality control requirements, and established records and procedures. Perform multi-tasking and multi-machine operation where applicable.

Duties:
The Company will provide appropriate assistance in job training to enable employees to perform all necessary job functions including the following:

1. Fabricate components using associated tasks including deburr, bending, routing, forming, cutting, shearing, straightening, shrinking, bead, flare, flange, beading, punching, countersinking, tapping or similar tasks.

2. Use hand, power tools & equipment to complete work assignment.

3. Validate quality of tool(s) prior to setup, during & after job completion.

4. Work from blueprints, drawings, templates, and check fixtures, form blocks and written/verbal instructions.

5. Self inspection is required of performed task prior to next work sequence. Uses precision measuring equipment (calipers, scales, etc.).

6. Rework and repair defective products as required.

7. Assist others in the execution of tasks as required.

8. As required layout parts and patterns to facilitate associated operations (shear, route, saw, etc.)

9. Setup, adjust, maintain and operate all equipment.

10. Work may occasionally require soldering riveting.

11. Use basic and advanced shop math.

12. Perform routine minor machine maintenance as part of their daily work duties (e.g., replacing machine filters, changing standard light bulbs on machines and equipment, maintaining lubrication/coolant levels, etc. as related to basic Total Preventative Maintenance duties).

13. Routinely move product within the immediate manufacturing work area, including across isle, using shop assigned equipment as required, and complete transactions necessary to move product to the next operation. On an exception basis, move product to the next operation within a building.

14. Support the continuous flow of product within the manufacturing process by training and assisting employees of the same or lower classification level.

15. Cross trains in inspection and becomes SIA qualified.

Qualifying Skills:
Advancement to any given level is subject to need, as determined by management, and employee meeting established qualification criteria.

Level:
Perform basic metal fabrication such as deburring, routing, metal forming, sawing trimming, including shear operation, punch press, counter sinking, and tapping equipment using engineering drawings and work instructions.

Requirements:
2+ years' recent experience in the aircraft industry

Stretch press experience is needed

Shift: 2nd (Most likely train on 1st and then move to 2nd)

OT: Yes

Large skin forming experience is very helpful

Oil field experience is helpful (hydraulic lines) as they understand the heavy equipment and safety measures in dealing with large structures and understanding pressure for machine operating.

NC Controlled machines (operating experience/exposure)

Overhead crane experience is a +

Ability to be on their feet for 8-12 hours a day

Building is not climate controlled (cold in winter and hot in summer)

Steel industry experience is helpful as well

Repetitive production work

Safety is pinnacle in this area
 
Job Number: FD-597188KS
Job Location: Wichita, KS
Rate: $22.00/HR
Per Diem: No - Local Candidates Only
Overtime: Yes
Duration: 3 Months
Start Date: 3/23/2018
Input Date: 03/08/2018
Last Updated: 03/16/2018
Firm Name: FOSTER DESIGN INC
Attention: Recruiter
Address: 200 W DOUGLAS AVE STE 110
City, State: WICHITA, KS 67202
Phone: 316/832-9700
800 Phone: 800/345-3394
Fax Phone: 316/832-9357
Website: www.fosterdes.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mid-Level Technical Writer

Description:
Mid-Level Technical Writer
Chula Vista, CA
6+ month contract


Our client is looking for a technical writer with 3-5 years of experience, specifically in the aerospace industry. The ideal candidate will have experience with aerospace technical manuals including but not limited to illustrated parts catalogues, SRMs, and service bulletins.


Qualifications:
•Technical writing
•Technical illustrating
•Analytical thinking
•Great verbal and written communication skills
•Strong command of English language.
•Familiarity with simplified Technical English
•Ability to read and understand 2D traditional drawings.
•Ability to understand 3D solid models and data sets.
•Experience with maintenance manuals, repair manuals , structural repair manuals
•Experience with aircraft or automotive technical manuals
•Attention to detail
•Quality oriented mindset
•Self Starter
•Self Motivated
•Keen willingness to learn by digging for answers but also by asking questions.

Education:
•4 year College degree preferred: English majors, Business degrees, science degree.
•2 year engineering associate degrees equally preferred.

Software Tools Preferred Experience:
•Isodraw
•Arbortext
•CORENA
•MS Word
•MS Excel
•Framemaker
•3DVIA
•CATIA (general familiarity)
•ENOVIA (general familiarity)
 
Job Number: 53024
Job Location: Chula Vista, CA
Rate: 35
Per Diem: Possible
Overtime: Possible
Duration: 6+ months
Start Date: ASAP
Input Date: 02/22/2018
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

PS Distribution & Logistics Spec II

Description:
PDS Tech is seeking an PS Distribution & Logistics Spec II for an open position in Savannah, GA. 

Develop and use a solid understanding of all regulatory and quality practices to perform the inspection, storing and shipment of material, to support AOG requirements and distribution needs in all markets. Under moderate supervision, play role to ensure that material is replenished in a timely manner and all documentation and export requirements are fully adhered to. Demonstrate an ability to operate in a high-paced, productive environment to support all internal customer requirements in a timely, professional manner.

Principle Duties and Responsibilities:

Essential Functions:
1. Monitor and assist in resolving AOG situations in a timely manner. Ensure conformance to AOG response policy to include effective and timely communication and execution. 2. Process pick tickets/ orders by pulling and issuing parts to support service center, spare parts sales, back shops, ASC and distribution allocation. Ensure all applicable regulatory documentation accompanies parts and ensure exportation to aircraft tail number compliance. 3. Prepare parts for shipment to customers, vendors, supplier facilities and distribution allocation in accordance with FAA regulations. 4. Demonstrate a solid understanding of inventory management systems (such as Corridor or SAP) to process all transactions associated to material handling and distribution. 5. Handle and transport Dangerous Goods in accordance with DOT, FAA and any other applicable standards. 6. Resolve any distribution discrepancies and elevate to appropriate party as needed with clear communication on steps taken and needed. 7. Maintain a clean and orderly work environment and assist in facility management and general housekeeping. 8. Demonstrate brand protection awareness by adhering to Material Handling Standards. 9. Demonstrate understanding of special inventory processes and programs to include Special Missions and others. Perform other duties as assigned.

Education and Experience Requirements: High School Diploma or GED required. College coursework desired. 1 year experience in distribution, warehousing, material handling, shipping, or receiving. Valid Driver’s License required. 

Other Requirements: 1. Ability to obtain certification to operate forklift and other material handling equipment. 2. Must possess and maintain a valid driver’s license. Ability to pass DOT medical exam. 3. Solid working knowledge of computerized inventory procedures to include experience in material services, inventory control or production control. 4. Competent user of computerized inventory management system. Corridor/SAP experience preferred. 5. Solid working knowledge of Microsoft Office Suite. 6. Good written and verbal communication skills. 7. Must be able to lift 50 pounds. 8. Ability to operate standard office equipment, personal computer, telephone, fax & copier. 9. Must be able to work all shifts and weekends. Shifts are subject to change at short notice.

Unique Skills: These positions are for all shifts except first shift. Candidate must be flexible and able to work any shift, any time. Shifts change often and are subject to change at short notice.


 
Job Number: 1710073984
Job Location: Savannah, GA
Duration: 6 months
Input Date: 09/22/2017
Last Updated: 11/14/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Rodney Kinlaw
Address: 900 CIRCLE 75 PKWY SE STE 600
City, State: ATLANTA, GA 30339
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000023HduAAE&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Powerplant DER

Description:
Position Purpose:
Responsible for the design, research and development of advanced new applications resulting in new product/business for the company.

Unique Skills:
• Minimum of 2 years as active PP DER or PP EAR
• FAR Certification and DER experience
• Function Codes: 8010E, 8050E, 8070E, 8110E
• Per DER Directory authorization on Chart B : A1, A2, A4, A6, A7, A9, A10, A14, A15, A19 and A20
• Per DER Directory authorization on Chart B : E1, E2, E4, E6, E7, E9, E10, E14, E15, E19 and E20

The ideal candidate will have exposure to some or all of the following Authorized Functions:
• Engine and APU installations
• Fuel and Oil (APU and Engine)
• Thrust Reversers
• Ice Protection (APU and Engine)
• Cooling (APU and Engine)
• Indicating systems (APU and Engine)
• Emissions
• Vibration
• Service Documents (APU and Engine)


Additional Authorized Functions must include:
• CS Authority (APU and Engine)
• Equipment Qualification Tests (APU and Engine)
• Aircraft / Bench Integration Test - Flight (APU and Engine)

Ability to sign the following FAA forms:
• Statement of compliance with Airworthiness standards - form 8100-9
• Type Inspection Authorization (TIA) - form 8110-1
• Request For Conformity (RFC) form 8120-10

Education and Experience Requirements:
• Bachelor's Degree in engineering, a related curriculum required or equivalent combination of appropriate education and experience sufficient to successfully perform the essential functions of the job.
• Fifteen (15) + year’s progressively responsible engineering exp in specific tech discipline with Bachelors. Exp credit considered for related adv degrees limited to 2 yrs Masters, 4 yrs PhD in fields applicable to this job. Requires approval of Eng PRB include bus justification.

Principle Duties and Responsibilities:
• Plans R&D programs and recommends technological application programs to meet corporate objectives
• Proactively promotes process initiatives that improve the balance of technical product, cost and schedule
• Applies cutting edge theories and technologies by exhibiting an exceptional degree of ingenuity, creativity and resourcefulness
• Champions and develops innovative principles and ideas
• Often acts independently and exercises wide latitude in determining objectives and approaches to critical assignments
• As a recognized expert in the field, provides consultative services to senior/executive leaders both within the company and the industry Perform other duties as assigned.
 
Job Number: 24-227
Job Location: Savannah, GA
Rate: $135.00
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 02/22/2018
Last Updated: 05/03/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Product Assurance Engineer

Description:
Product Assurance Specialist

Position Purpose:
Collaborates with engineering, operations and procurement in a team environment on development programs and assists in ensuring aspects of the designs, test articles and supplied/manufactured articles are capable of being produced in accordance with approved quality system requirements and certified as compliant to aircraft type design requirements.

Unique Skills:
• Seeking engineering-based position within the quality organization related to design model checking & verification.

Essential Functions
• Contributes to incorporating design quality assurance on development programs and participates in new product design and development, design validation/verification, risk management, planning, flight test and design change activities.
• Partner with design engineers and assist in resolving quality issues and executing design, development, and design transfer initiatives which may include design/process quality capability analysis, supplier selection, requirements incorporation validation.
• Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives.
• May partner with Manufacturing Engineers to develop/validate manufacturing processes and provide technical quality support for process planning.
• Assists in use of risk management tools (i.e. FMEA) as appropriate.
• Acts as liaison with representatives outside of the assigned group/area.
• Good understanding of and experience with key design characteristics definition, FMEA, statistics theory and application (SPC) preferred.
• Competencies include: Design control, project management skills, strong interpersonal skills, excellent computer skills, risk management, and strong results orientation.
• Familiar with Geometric Dimensioning & Tolerance (GD&T)
• Knowledge of state-of-the-art quality engineering/assurance techniques, procedures, instruments, equipment, theories, principles and concepts preferred.
• Ability to read, analyze and interpret technical documents, Engineering drawings and 3D models.
• Ability to define problems, collect data, establish facts, and draw valid conclusions.
• Capable of working closely with RD&E, Manufacturing and Operations regarding active product quality planning (APQP) through the use of quality control plans and product & process FMEA tools.

Education and Experience Requirements:
• Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Advanced degree in engineering or related curriculum preferred.
• 5 years in a specific technical discipline or 8 years broad eng experience in several technical disciplines.
 
Job Number: 24-209
Job Location: Savannah, GA
Rate: $50-$60
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 02/22/2018
Last Updated: 05/17/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Product Repair/Mod Tech D

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Product Repair/Mod Tech D
(U.S. Citizenship Required*)
Tinker AFB, OK
2018-5578

Responsibilities:
• Lead Technician: lead assembly, disassembly and modification of systems by overseeing change, removal, replacement or upgrade of aerospace vehicle components to correct failures or implement changes.
• Oversee assembly, disassembly or overhaul.
• Configure aerospace vehicles, ground support and bench test equipment.
• Direct troubleshooting of complex pneumatic, hydraulic and electrical systems to isolate mechanical or electrical faults and repair faulty components.
• Oversee systems and components validation/verification testing.
• Document procedures and established processes to ensure contractual and regulatory compliance (e.g., repairs, test results, applicable modifications and inspection results).
• Inspect components and verify repairs for flight worthiness requirements.
• Lead and supervise others to perform tasks associated with the safe handling of an aerospace vehicle (e.g. jacking, towing, system operations).
• Provide training and mentor others.
• Position will be first, second or third shift; be cross utilized to perform servicing and team member activities; travel to support remote maintenance activities, and/or modification of forward deployed aircraft.

Qualification:
• Required – Active Secret Clearance. Candidates without this clearance will not be considered.
• Required – Willing and able to deploy/travel, on short notice to domestic/international locations, for a variety of durations, to meet customer needs and work statement, at the sole discretion of leadership. Unless compelling reasons exist, failure to deploy/travel will be considered as a resignation.
• Knowledgeable in planning & leading all aspects of aircraft maintenance, modification and repair to include skill and experience in either Electrical and Avionics or Airframes system disciplines.
• Knows general aircraft maintenance and environment processes (FOD control, tool control, health & safety)
• Previous team leadership experience required
• Experience operating and repairing integrated air vehicle electrical and mechanical control systems, aircraft engines, auxiliary power units and alternate mission equipment, and accomplishing metallic and composite structural repairs.
• Familiar with both US Air Force Technical Orders, G081 maintenance data base, and able to interpret system schematic diagrams to isolate mechanical faults and repair faulty components.
• Work may require responding during off-hours and weekends.
• Work under minimal direction.
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• High school diploma or GED and typically 7 or more years’ related experience or an equivalent combination of education and experience.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2018-5578
Job Location: Tinker AFB, OK
Duration: 2 Months
Input Date: 03/08/2018
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Susan Earp
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Production Control Specialists - Nashville, TN

Description:
STS AeroStaff Services now offers Production Control Specialist jobs in Nashville, Tennessee.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Summary:

Compiles and records maintenance production data to prepare records and reports on volume of production, consumption of raw material, quality control, and other aspects of maintenance production.

Job Duties:

• Receive customer repair orders
• Receive Hangar paperwork as required and files per customer request
• Open tasks as required from Hangar for each work order
• Open work orders
• Deliver work order and part to appropriate shops for repair
• Receive completed orders after repair is complete
• Deliver Accounting copies to Accounting Department for billing
• Performs accurate accountability of repair documentation on all parts being worked including updating computer and filing
• Accounts for all tracked paperwork in tally books in Production Control
• Closes work orders
• Closes operations in those work orders
• Answers and directs company phone calls as a backup
• Coordinates with customers regarding form completion
• Coordinates with leads as to which planes have priority
• Coordinates with Project Managers on any special requests
• Familiar with each customer's Qualified Inspectors Listings
• Generates reports from as required
• Assist Director of Quality Assurance and Hangar as needed
• Keep workplace organized

Qualifications:

• High School Diploma
• Generally 0-2 years’ of experience in area of responsibility
• Experience in production control activities, including monitoring customer orders, preparing records and reports on production, gathering and filing records
• Assignments require minimal knowledge beyond the assigned work
• Demonstrates correct understanding of routine aspects of work
• Has knowledge of aircraft production, storage and distribution of spare parts, tools, technical publications and other materials
• A&P graduate desirable
• Organized and detailed oriented
• Basic office skills, Intermediate Microsoft word and excel
• Quality techniques
• Customer service
• Customer oriented, interpersonal relationship skills, dependable, and responsible
• Ability to work in a safe professional manner adhering to all regulatory requirements including, OSHA, EPA, State and Federal regulations

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 41733
Job Location: Nashville, TN
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 03/06/2018
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Production Engineers - Greensboro, NC

Description:
STS AeroStaff Services is hiring Production Engineers in Greensboro, North Carolina.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Summary:

Provide technical support for the Production Engineering Department. The Engineer must be able to develop documentation and procedures to ensure compliance specific to various company policies and procedures.

Job Duties:

• Audits and recommends improvements to the effectiveness and efficiency of the Production Engineering Department’s procedures and processes
• Manages and supports the implementation of enhancements to procedures, processes and operating tools
• Serves as a Liaison with various external departments for progress and maintenance of processes while ensuring they align with ail other relevant procedures and communicate awareness of changes
• Interfaces with multiple functional groups including: Systems Architects, Supply Chain, Quality and Production Operations to develop strategies for implementation of engineering, system, and process improvements
• Identifies opportunities for improvement and standardization; documents and prepares initiatives for process and/or engineering change to reduce cost and increase quality
• Participates in activities to enhance and support Production teamwork, and provide an environment for ail team members to participate in Cl (Continuous Improvement)
• Provides technical support and assistance with the development and improvement of methods, quality product design, cost, and technical issues of a complex manner as required
• Analyzes a variety of engineering data to help determine requirements to meet objectives
• Plans and documents various installation processes, tooling, equipment and quality control methods to optimize the manufacturing operation
• Provides data comparisons between the Engineering Bill of Materials (EBOM) to the Manufacturing Bill of Materials (MBOM), Engineering Bill of Materials (EBOM) to the “As Built”

Qualifications:

• Bachelors' degree in Manufacturing Engineer or other related field strongly preferred
• Minimum 5 years’ and a maximum of 20 years’ of Manufacturing experience
• Six Sigma Training or Lean Manufacturing experience a plus
• Configuration Management certification preferred
• Innovative, visionary, and servant leader mentality
• Proactive and a self-starter, able to work with minimal supervision
• Basic Project Management skills
• Solid problem solving and analytical skills, able to identify and analyze organizational needs
• Basic knowledge of Continuous Improvement practices
• Excellent oral and written communication skills
• Strong organizational skills
• Experience utilizing tools such as SAP, TeamCenter, MS Office Suite (Word, Excel, Visio (or equivalent) PowerPoint and Project)
• Experience as an advanced Excel user - visual basic/macro-writing skills a plus
• Ability to work in a diverse environment
• Working knowledge of aircraft assembly, sequencing, and manufacturing flow
• Ability to read and interpret engineering drawings and/or specifications requirements

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 41637
Job Location: Greensboro, NC
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 02/23/2018
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Production Stress Engineer

Description:
UNIQUE SKILLS
• Minimum of 10 years of experience in stress analysis on primary aircraft structures.
• Must have some experience conducting fatigue analysis on aircraft structure.
• Must have FEM and CATIA V5 experience.
• Experience developing and substantiating aircraft structural repairs is a plus.
• Experience in structural repair development and analysis.

PRINCIPLE DUTIES AND RESPONSIBILITIES

• Selects appropriate methods, techniques and evaluation criteria to resolve complex engineering issues
• Consulted extensively by associates and others as a recognized authority within the field
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
• Approach to problem solving balances technical product, cost and schedule
• Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

EXPERIENCE/EDUCATION
• Bachelors Degree in engineering; AE, CE, ME with a minimum of 10 years analysis experience on primary airframe structure.
 
Job Number: 24-212
Job Location: Savannah, GA
Rate: $70-$77
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 02/22/2018
Last Updated: 04/11/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
QA Certification Specialist II

Description:
QA Certification Specialist II

Location: Savannah, GA
Pay Rate: $50/hr
Duration: Long Term Contract
Shift: First, Flexible Schedule

Unique Skills:
-Working knowledge of FAA regulations and Aircraft Certification processes in a Type Certificate program.
-Detail oriented and able to evaluate data for inconsistencies within tables, reports, technical documentation and other records required to support conformity process.
-Flexibility to work varied hours or weekends as necessary to support aircraft testing schedule.
-Prepares reports, creates test tracking using data from various company systems.
-Experience working with SAP, Solumina, SmarTeam and MS Excel desired.
-Demonstrated experience with data validations, data integrity and regulatory reporting desired

Education and Experience Requirements:
Bachelors degree in Engineering, aviation sciences, quality systems or related field; or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Two years related technical experience of continually increasing responsibility.

Position Purpose:
In a team oriented environment, performs all tasks in area of responsibility in a timely and efficient manner to support aircraft certification activities performed by FAA Principle Inspectors or Company ODA IARs. Ensures the article and all associated data supports and presented for certification meets requirements in accordance with the approved Quality Assurance System and the ODA (ODA-511131-CE) Operations Manual.

Principal Duties and Responsibilities/Essential Functions:
1. Coordinates article & aircraft certification activities to program schedule and milestones.
2. Manipulates and maintains large data sets related to configuration, article traceability and conformity of aircraft to determine status and compare to schedule and objectives.
3. Prepares and/or reviews data packages prior to submission in accordance with ODA/FAA requirements.
4. Performs data evaluation, interrogation and correlation of data between electronic systems.
5. Identifies abnormal data trends or changes, works with internal and external organizations to facilitate resolution.
6. Interprets engineering configuration data relative to manufacturing planning and deviations.
7. Monitors completion of certification tasks to ensure completion to program requirements and schedules.
8. Participates in team process improvement team projects both internal and external to quality.

Additional Functions:
1. Actively engaged and completes process improvement projects related to achieving improved quality or efficiency within their area of responsibility.
2. Actively supports corporate initiative in resource sustainability and business continuity.
3. Promotes, encourages and supports continuous improvement culture.
4. Performs other duties as assigned.

Other Requirements:
1. An Airframe and Powerplant (A&P) license is not required but may be used in combination with four (4) years of related quality experience (in addition to the experience requirements below) to offset the Bachelors degree.
2. ASQ certification (CQE) and/or experience as a FAA recognized airworthiness designee highly preferred.
3. Current/prior authorizations as an FAA IAR/DMIR/ODAR or DAR is preferred.
4. A&P license preferred.
5. Understands and is able to apply and communicate to others: blueprints/specifications, Federal Aviation Regulations, Quality Control System Requirements.
6. Computer literate-capable of working within the various software applications utilized throughout the corporation.
 
Job Number: 7910
Job Location: Savannah, GA
Rate: 50.00
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 03/07/2018
Last Updated: 03/07/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Assurance Engineers - Greensboro, NC

Description:
STS AeroStaff Services is hiring Quality Assurance Engineers in Greensboro, North Carolina.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Summary:

Develops, directs, and accomplishes Quality Assurance programs that require the application of advanced Quality Assurance techniques and methods.

Job Duties:

• Performs Planning Work Instruction review prior to issuance to manufacturing, ensuring that Quality Assurance operations are correctly placed and drawing Quality Assurance requirements are adequately addressed
• Supports discrepancy report activity, along with calibration and tooling
• Directs quality assurance personnel assigned as inspectors in specific areas of responsibility
• Directs the solution of problems affecting the quality of completed aircraft
• Assures that the planned courses of action are compatible with contractual commitment, established schedules, cost estimates, available facilities/equipment and other Quality Assurance considerations
• Develops Quality Assurance programs for new products/processes, outlining organization required, inspection techniques and methods, manpower requirements, and facility needs
• Analyzes inspection methods, tools, equipment, and facilities to determine basic requirements for control of quality at desired level
• Organizes, plans, and directs the development/administration/improvements of Quality Assurance functions in support of reliability programs
• Leads the activity of personnel assigned to this function in advanced phases of data analysis, correlation of failure reporting and processing methods and functional program study

Qualifications:

• BS degree in Engineering or other related field of study preferred
• 2 years’ minimum and a maximum of 15 years’ of aircraft related Quality Assurance Engineering experience
• Will consider related experience in lieu of earned academic degree or aircraft familiarity
• Excellent oral and written English communication skills
• Excellent computer Microsoft Suite application (Word, Excel, Access, Lotus Notes)
• Strong analytical skills are required
• Must be effective in working in an environment that requires the ability to: multi-task, adapt to frequently changing priorities, and to produce quality and timely deliverables within a setting where there are limited established procedures and protocol ambiguity may exist
• Experience, knowledge, or interest in Aerospace, new aircraft development, certification and/or manufacturing is preferred
• Experience in development and oversight of an FAA Part 21 approved Quality System preferred
• Ability to act independently with at minimum level of supervision

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 41638
Job Location: Greensboro, NC
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 03/05/2018
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Engineer

Description:
The Quality Engineer researches contractual and Quality Management System requirements for applicability to program processes and documentation. Develops sections of quality metrics, design and production certification plans to ensure compliance with contractual, Company and regulatory requirements. Works closely with Manufacturing Engineering and shop floor technicians while providing ship side support for aircraft planning. Performs root cause corrective actions, manufacturing planning reviews and Quality verification/validations. Analyzes data to look for process improvements opportunities. Participates in various reviews to ensure quality attributes are incorporated into product designs. Performs data analysis to ensure manufacturing and test readiness. Reviews engineering requirements, confirms they are incorporated fully in build plan, and confirms that shop operations/quality inspection fully understand and comply with the requirements. Provides material review dispositions for non-conformances. Analyzes non-conformance trends to evaluate effectiveness of corrective actions. Compiles performance reports and other statistical data to ensure specified processes capability levels are achieved. Works under general supervision Bachelor’s degree and typically 2 or more years' experience in an engineering classification or a Master's degree with experience in an engineering classification. Required: Bachelor or Master Degree from an accredited course of study, in engineering.
 
Job Location: Jacksonville, FL
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2017
Last Updated: 03/09/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
RMS (Reliability, Maintainability, Safety) Engineer

Description:
RMS (Reliability, Maintainability, Safety) Engineer

Location: Fort Worth, TX
Pay Rate: $37.50/hr
Duration: 12 month W2 contract
Shift: First
Travel: Occasional travel between customer/suppliers and Company locations
**MUST be a U.S. CITIZEN**
**No Per Diem**

Description:
-The RMS engineer is responsible for generating and coordinating all required RMS analyses and documentation in support of the certification effort of Landing Gear System on a new aircraft and continued airworthiness of in-service aircraft.
-Required documentation includes but is not limited to: RMS Program Plans, Reliability Predictions, Failure Mode Effects Analysis / Summary (FMEA / FMES), Fault Tree Analysis (FTA), (Preliminary) System Safety Analysis ((P)SSA), Common Cause Analysis (Particular Risks, Common Mode Analysis, Zonal Analysis), Dispatch Reliability Analysis, MSG-3 Analysis, Maintainability Plans and Analyses, Direct Maintenance Cost (DMC) Analysis, etc.
-In addition, the RMS Engineer is engaged with the Chief Engineer’s Office and supports the RMS aspect of R&D programs, as required.
-The engineer will maintain current and work on preparation of new RMS engineering manuals.
-This position works directly with the Customer. Occasional on-site support and travel will be required.
-Integration with the New Product Introduction (NPI) and in-production engineering groups is a must and, therefore, strong communication skills and team work is strongly desired.

Primary Responsibilities of this role include:
◦Provide support to the Project Head for all RMS related tasks which encompass:
◦Review proposals
◦Prepare, coordinate and execute RMS Program Plans
◦Prepare / review RMS documentation as listed above
◦Approve Engineering Dwg’s
◦Prepare and support Design Reviews as required
◦Support Landing Gear product improvements
◦Revise / prepare RMS Engineering Manuals
◦Perform RMS Analyses on R&D projects
◦Maintains compliance to ITAR and regulatory requirements

Requirements:
◦ Bachelors degree or higher required
◦ 4-6+ years of RMS experience
◦ Landing gear/hydraulic experience in the aerospace industry
◦ Excellent communication skills and ability to travel

Additional - executes RMS activities including:
•Foster strong customer relationships through accountability, transparency and credibility
•Responsible and accountable for all Landing Gear RMS tasks and its completion dates
•Communicates progress and roadblocks with the Project Head
•Provide RMS input to Landing Gear designers and Project Head to help ensure system compliance with customer requirements
•Utilize ACE Standard Work Tools to facilitate execution for RMS related tasks
•Supports Engineering investigations into failures and participates in Root Cause and Corrective Action •Occasional travel between customer/suppliers and Company locations.
•Support development of Landing Gear cultural initiatives through the use of Company 4-gears philosophies
•Perform other duties as required
•Must comply with all site EH&S policies and procedures
 
Job Number: 8441
Job Location: Fort Worth, TX
Rate: 37.50
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 03/07/2018
Last Updated: 03/12/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

RS Acft Painter II

Description:
PDS Tech is seeking an RS Acft Painter II  for an open position in Savannah, GA.


The Aircraft Painter II works under minimum supervision to safely prepare, paint and detail aircraft according to schedule using company quality standards and operating procedures. 

Principal Duties and Responsibilities:

Essential Functions:
1. Safely perform aircraft preparation, painting, and detailing of aircraft under minimal supervision. Coordinate with supervision and Inspection to ensure compliance with internal and FAA paperwork, sign-offs and quality specifications. 2. Follow standard operating procedures when using tools and equipment such as dual action sanders, hydraulic lift platforms and paint sprayers. Properly care for and maintain shop equipment and tools. 3. Follow standard operating procedures when using sealants, paint strippers and corrosion-preventive chemicals and use protective equipment as required. 4. Comply with safety rules and procedures and be alert for unsafe conditions. Address unsafe conditions before putting people or property at risk. 5. Use the material tracking system to create parts demand, track squawks and to sign-off work. 6. Assist with aircraft movement in hangars. 7. Offer continuous improvement ideas/participate in continuous improvement activities. 

Education and Experience Requirements: High school diploma/GED. Valid Drivers License required. Two (2) years experience in related paint processes. Aircraft industry experience preferred. A working knowledge of paint processes and products (lacquers, enamels, epoxies, urethanes, and acrylics) is necessary.

Other Requirements: 1. Ability to read, write, speak, and understand the English language. 2. Able to use tools and equipment associated with the aircraft painting process. 3. Ability to read and interpret blueprints and engineering documentation. 4. Able to pass Pulmonary Function Test to obtain respirator certification. 5. Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift. 6. Must be computer literate.

POC: Clyde (813) 426-9917 or ccallwood@pdstech.com


 
Job Number: 1710075195
Job Location: Savannah, GA
Duration: 6 months
Input Date: 10/11/2017
Last Updated: 11/14/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Clyde Callwood
Address: 3922 COCONUT PALM DR STE 100
City, State: TAMPA, FL 33601
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000023KwkAAE&URLSource=cjhunter

RS Acft Painter II

Description:
PDS Tech is seeking an RS Acft Painter II  for an open position in Savannah, GA.


The Aircraft Painter II works under minimum supervision to safely prepare, paint and detail aircraft according to schedule using company quality standards and operating procedures. 

Principal Duties and Responsibilities:

Essential Functions:
1. Safely perform aircraft preparation, painting, and detailing of aircraft under minimal supervision. Coordinate with supervision and Inspection to ensure compliance with internal and FAA paperwork, sign-offs and quality specifications. 2. Follow standard operating procedures when using tools and equipment such as dual action sanders, hydraulic lift platforms and paint sprayers. Properly care for and maintain shop equipment and tools. 3. Follow standard operating procedures when using sealants, paint strippers and corrosion-preventive chemicals and use protective equipment as required. 4. Comply with safety rules and procedures and be alert for unsafe conditions. Address unsafe conditions before putting people or property at risk. 5. Use the material tracking system to create parts demand, track squawks and to sign-off work. 6. Assist with aircraft movement in hangars. 7. Offer continuous improvement ideas/participate in continuous improvement activities. 

Education and Experience Requirements: High school diploma/GED. Valid Drivers License required. Two (2) years experience in related paint processes. Aircraft industry experience preferred. A working knowledge of paint processes and products (lacquers, enamels, epoxies, urethanes, and acrylics) is necessary.

Other Requirements: 1. Ability to read, write, speak, and understand the English language. 2. Able to use tools and equipment associated with the aircraft painting process. 3. Ability to read and interpret blueprints and engineering documentation. 4. Able to pass Pulmonary Function Test to obtain respirator certification. 5. Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift. 6. Must be computer literate.

POC: Clyde (813) 426-9917 or ccallwood@pdstech.com


 
Job Number: 1710074139
Job Location: Savannah, GA
Duration: 6 months
Input Date: 09/26/2017
Last Updated: 11/14/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Clyde Callwood
Address: 3922 COCONUT PALM DR STE 100
City, State: TAMPA, FL 33601
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000023I4pAAE&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Repair Engineer

Description:
Primarily responsible for preparing and submitting SAR packages as justification for approval to repair/overhaul military aircraft engine components.
* Support repair development engineering team with development of new & existing repair procedures, tooling design/fabrication, & other associated technical documentation/instructions.
* Support continuous improvement & lean initiatives to improve existing processes/procedures and potentially investigate new processes, technology, & equipment.

Requirements:
Experience in the aircraft engine maintenance industry, specifically with component repair.
* Familiarity with OEM standard practice & repair procedure documents.
* Possesses strong technical writing skills to be able to package together source repair approval justification reports and documentation.
* Knowledge of manufacturing processes necessary to overhaul and repair aircraft components
* Ability to interpret component inspection criteria and use necessary hand inspection criteria.
* Ability to take technical data & repair procedures and turn it them into understandable work instructions for shop floor personnel.
* Must be a US Citizen or a US Permanent Resident.
 
Job Number: 18-815
Job Location: Midwest
Duration: Long Term
Start Date: ASAP
Input Date: 04/25/2018
Last Updated: 05/10/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
SD-Tech Pubs-LSA-3.Advanced

Description:
The Canadian Maritime Helicopter Program (CMHP) Program is looking for a talented and motivated Logistics Support Analyst to support the development and sustainment of the CMHP CH-148 Publications. Candidate will report directly to the CMHP Integrated Product Team (IPT) Lead - LSA personnel. The maintenance program is developed in the Client
Maintainability System (SAMS) and provides the framework for the maintenance publications. The Technical manual series for this program is prepared in accordance with S1000D authoring specification and delivered in an Interactive Electronic Technical Manual (IETM) product. This IETM contains principles of Operation, Maintenance, Illustrated parts Breakdown, and
Testing/Troubleshooting procedures inclusive of system diagnostics.

The primary purpose of the Logistic Support Analysis process is to provide up-front design influence to enhance overall aircraft supportability and operational readiness, while reducing the life cycle cost. The overall objectives of the Logistic Support Analysis are to establish, validate and update the maintenance concept for the entire aircraft life cycle.

The Logistic Support Analyst position requires technical knowledge of the UH-60/S70, SH-60/S70B, S-92/H92 helicopters with experience involving a broad knowledge of Helicopter / Aircraft mechanics, electrical/electronics maintenance and support functions including Component Inventory, Trade Studies, Data Analysis, and Modeling. The position also involves the application of Logistic principles to support Helicopter Maintenance and related support functions which includes Electrical / Electronic/Mechanical System Operational Analysis, and Maintenance Tasking. Familiarity with engineering drawing interpretation, maintainability and reliability principles, assembly and disassembly methods and manufacturing and inspection methods is required.
 
Job Number: 17-705-1514
Job Location: Northeast
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 03/21/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Electrical Engineer (Secret Clearance)

Description:
ROLE AND RESPONSIBILITIES
Provide electrical engineering support to Research, Development, Test and Evaluation (RDT&E) programs for military aircraft/weapon systems, including planning, directing, and/or participating in aircraft and laboratory testing. Prepares procurement specification inputs, interface drawings, installation design packages, and calibration procedures to accommodate unique test requirements. Oversees systems modifications, installation, integration, and checkout functions. Performs test planning, data collection, and test data analysis. Functions entail providing support for electrical power quality testing and evaluation, including voltage and frequency transients/modulation, voltage distortion, and power interruption on various aircraft, shipboard, ground vehicle, and vendor prototype components and equipment. Functions involve applying engineering principles to modify and upgrade laboratory electrical and instrumentation systems in support of power and propulsion RDT&E programs. Projects will interface test articles with programmable power supplies and data acquisition equipment to conduct power quality tests, followed by analysis of test article responses for compliance with MIL-SPECS/MIL-STDs. In particular, candidate must have experience with Interface Standards for input power to military and aircraft contained in MIL-STD-704, military vehicles contained in MIL-STD-1275, and FAA RTCA DO-160. That experience must also include interpreting guidance for test procedures specified in MIL-HDBK-704 parts 1 through 8. Position also requires knowledge of test planning, data collection, data analysis, test report writing, and presentation of results. Further requirements include specialized knowledge and experience in the design, installation, operation, calibration, maintenance and repair of power quality test facilities, associated equipment, and their control systems. Duties may include performing other tasks for propulsion and power as directed. Candidate must be able to obtain/retain a Secret level DoD security clearance, and may be required to perform other tasks on an as-needed basis. Position is located in Patuxent River, MD.



REQUIREMENTS
Education:
Bachelor's Degree in Electrical Engineering (EE) from ABET accredited university required with a minimum of 8 years' experience supporting RDT&E to include 6 years performing functional aspects as described in the roles and responsibilities. Master's Degree in Electrical or other Engineering related discipline a plus.

Experience:
Experience working with research, development and testing with respect to requirements and characteristics of propulsion and power equipment performance.
Experience must include conducting tests to generate extreme power conditions meeting specification for standardized test regimes then conducting performance tests of electronic and electrically-powered equipment after exposure to test conditions.
Applying test conditions to include extremes with respect to voltage, frequency, modulation, distortion, and other characteristics.
Performing tests post exposure to extreme conditions to verify operation remains within specification and the equipment continues to function reliably in-service.
Experience with MIL-STD-704, MIL-STD-1275, and FAA RTCA DO-160 required.
Must have demonstrated experience directing, monitoring, and/or participating in the installation, configuration, calibration, and operation of engine test systems, environmental chambers, associated instrumentation, and/or data acquisition systems used for testing propulsion and electrical power systems.
The candidate should be capable of managing programs including writing proposals, developing program plans, and providing briefing material.

Knowledge, Skills and Abilities:
The candidate should be capable of managing programs including writing proposals, developing program plans, and providing briefing material.
Functions involve applying engineering principles to modify and upgrade laboratory electrical and instrumentation systems in support of power and propulsion RDT&E programs.
Applying analysis and test methods demonstrating equipment compliance to power characteristics.
Ability to develop test plans, design test equipment, establish protocols and procedures specific to individual test articles following guidance provide in DoD, FAA, and other documents.
Knowledge in applying programmable power sources with appropriate software and firmware needed to generate waveforms specified by test standards.
Knowledge of MIL-STD-704 and the eight parts of MIL-HDBK-704 for aircraft systems. Knowledge of MIL-STD-1275 for Military Vehicles.

Equipment and Machines:
Ability to operate office equipment such as personal computer, printer, copy machine, telephone, fax machine and other equipment including desk supplies and other work related tools as required.
Ability to operate power test systems to include programmable AC/DC power sources, power analyzer, test management and control systems, laboratory measuring, environmental chambers and other equipment required to provide test conditions, manage test sequences, and perform measurements of test parameters.
Ability to perform or facilitate calibration and repair of laboratory testing and measurement systems.

PREFERRED SKILLS
Prior DoD acquisition work experience is preferred. Familiarity with NAVAIR Propulsion and Power Laboratories and related competencies also preferred.

ADDITIONAL NOTES
Applicant selected will be subject to a government security investigation and must meet eligibility requirements for access to classified information.
 
Job Number: 18-07393
Job Location: Patuxent River, MD
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 Month+
Start Date: ASAP
Input Date: 03/27/2018
Last Updated: 04/10/2018
Firm Name: NESCO RESOURCE
Attention: Cody Grimes
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Developer CA

Description:
Job ID# 15697BR
Title TEMP Software Developer
Job Summary General Atomics Aeronautical Systems, Inc. (GA-ASI), an affiliate of General Atomics, is a world leader in proven, reliable remotely piloted aircraft and tactical reconnaissance radars, as well as advanced high-resolution surveillance systems.

We recognize and appreciate the value and contributions of individuals with diverse backgrounds and experiences and welcome all qualified individuals to apply.

DUTIES AND RESPONSIBILITIES:•Determine user requirements and specifications and plan for software development within the broader organizational scope. Software development includes end-user, system level, and data management applications,
•Formulate detailed plans for the implementation of software solutions. In addition to program design this includes determining language, platform, and resource requirements.
•Implementation of design including coding, testing, and documentation.
•Deployment of applications across the enterprise including cross- platform compliance and insuring availability of necessary resources.
•Code maintenance including debugging and updating to keep pace with the evolving environment.
•Assist in planning for future applications based on new developments in computer technology.
•Communicate with the software developer group, with users, and with management as well as with the wider community through the publishing and presentation of technical papers.
•Maintain the strict confidentiality of sensitive information.
•Perform other duties as assigned.
•Responsible for observing all laws, regulations and other applicable obligations wherever and whenever business is conducted on behalf of the Company.
•Expected to work in a safe manner in accordance with established operating procedures and practices.




Additional Qualifications


Proficient in C, C++, Linux, Linux Kernel
H.264, NTSC, KLV, MPEG2, FFMPEG
Technologist with a video background




Qualifications Essential Qualifications Typically requires a bachelors degree, masters degree or PhD in computer science, information systems or a related discipline and progressive software development experience as follows; four or more years of experience with a bachelors degree or two or more years of experience with a masters degree. May substitute equivalent experience in lieu of education. Must have a complete understanding of software development concepts, principles, and theory and demonstrate complete understanding and application of programming and analysis concepts. Must possess the ability to understand new concepts quickly and apply them accurately throughout an evolving environment. Ability to organize, schedule, and coordinate work phases and, determine the appropriate approach at the task level or, with assistance, at the project level and to provide solutions to a range of complex problems. Must have strong communication, computer, documentation, presentation, and interpersonal skills, ability to work independently and as part of a team; and, lead a team of less experienced professional employees on semi-routine tasks. Able to work extended hours as required.

City San Diego
State California
Travel Percentage Required 0% - 25%
Clearance Required? Desired
Work Schedule Rule 9/80
Temp Assignment Duration (# of Days) 365
 
Job Number: JE-15697
Job Location: San Diego, CA
Duration: 12 months
Input Date: 02/22/2018
Last Updated: 05/01/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com