Job Search Results

164 listings were found that matched your search words: Keywords: Civil OR Industrial ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2018/01/23 Tuesday 06:01PM Pacific Time by ContractJobHunter. )

Listings 1 - 164

Go To My Job Tracker

Expand all descriptions

2175 - STRESS ENGINEER - resume - word doc. only

Description:
Stress analysis in support to Non Conformity Reports (NCR) raised during production by working closely with production and liaison engineering.

Preliminary and detailed sizing.

Stress analyses to ensure requirements (static, fatigue, damage tolerance, weights, customers) are met.

Validation of engineering drawings and IPDT support.

Preparation of certification reports and support to entry-into-service.

Have a University mechanical or civil or aerospace engineering degree with a minimum of 5 years relevant experience.

Experience should include at least one of the following skills in the structural integrity qualification (loads, static, fatigue, and damage tolerance) of airplane components.

MRB Structures Stress on Client aircrafts is an asset.

Knowledge of CATIA, finite element modeling/analysis, and Nasgro is an asset. General computer skills are essential.

Must be a self-motivated person, a team player able to work under pressure and under a minimum of supervision.

Must be able to read and write in English and have good communication skills.

Being completely bilingual (French and English) is an asset.
 
Job Number: 2175
Job Location: Montreal, Canada
Rate: 60.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 01/17/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Email: tdm@tdm.ca
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2210 - INDUSTRIAL ENGINEER - cv. word doc only

Description:
Design, balance and updating of follow-up charts of production work.

Draw the diagram of prior artwork, and identify the critical path for each position in a lean manufacturing mindset.

Establish and monitor the progress of off-position work plans in Toronto for the Global 7k / 8k cockpit.

Participate in the development of tempo change scenarios;

Calculate manpower requirements.

Perform time measurement (observation and or time studies).

Participate in the identification of bottlenecks and complete capacity calculations.

Participate in harmonization of changes and their implementation.

Achieve different levels: technical manuals, classifications and approvals solid models and assemblies.

Analyze and verify CATIA 3D models.

Identify sources of waste in the process and propose solutions for improvement.

Monitor and follow the action plans needed to reduce production hours.

Have A College diploma or bachelor%u2019s degree in Industrial Engineering, Mechanical engineering or equivalent

Have a minimum 8 manufacturing experience

Technical knowledge in manufacturing, aerospace structure or aircraft interior finishing is an asset

Have the knowledge of the lean manufacturing principles and the use of visual stream mapping (VSM)

Master the computer software design CATIA V5

Master CAD database such ENOVIA and VPM Nav.

Master Microsoft Excel.

Possess strong problem solving skills.

Possess strong abilities in adaptability, flexibility and team player.

Bilingual - master both French and English

Are available to travel to Toronto if needed.
 
Job Number: 2210
Job Location: Montreal, Canada
Rate: 54.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 24 Mths
Start Date: ASAP
Input Date: 12/08/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

2228 - AVIONICS SYSTEMS INTEGRATOR - resume - word doc only

Description:
Responsible, as an Avionics Systems Integrator Specialist, to perform various tasks related to the development, qualification, certification and in-service support of Avionics systems on Challenger aircrafts.

Responsible for supporting investigation for in service and manufacturing issues and performing root cause analysis of Avionics systems.

Participate and define Avionics Systems architecture design to meet Aircraft Design Requirements and Objectives.

Support the Flight Test Center in development and certification tests; witnessing of tests may be required.

Support the Final Assembly Line and In Service Aircraft for any development issues.

Manage, review and approve the deliverables of the Avionics System Suppliers.

Work with other functions & disciplines of the Challenger program to provide required information and also to collect required data to allow the Avionics design, development & certification effort to progress.

Support other departments such as Production, Customer Support, Program Office and Product Planning.

Participate in meetings and design reviews with Avionics System Suppliers and certification authorities.

Be able to travel is a must.


University degree in Electrical, Electronics, Software, Aerospace Engineering or equivalent.

Must have at least eight (8) years of relevant experience with the design, development, integration and certification of Avionics systems.

Have a good knowledge with the specification, design, integration, test and certification of Avionics systems on aircraft.

Good knowledge of RTCA documents DO-178 and DO-160.

Good knowledge of part FAR25/525 certification process and with the ARP4754 standard.

Experience with civil aircraft and airworthiness authorities.

Systems: Datalink, Flight Management System and Display integration.

Proficient with the use of Microsoft Office software tools to produce presentation and reports.

Ability to work well in a team environment.

Strong communication skills (written and spoken).
 
Job Number: 2228
Job Location: Montreal, Canada
Rate: 64.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 01/17/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Email: tdm@tdm.ca
Website: www.tdm.ca

2304 - AVIONICS SYSTEMS ENGINEER - cv. word doc only

Description:
Support of Compliance to Certification Authority; author Certification Plans

Provide specialist advice relating to test methods and procedures

Review testing readiness and conformities of assigned systems

Review qualification, ground and flight test data of assigned systems

Review flight test reports containing data demonstrating proper system operation as required by Certification Authorities Regulations

Review and Sign flight release documentation (including safety of flight judgments)

Review system performance analysis to ensure proper compliance to regulations

Coordinate with other Certification Authority Delegates for integrated functions (ie, Human Factor, Pilots, et al)

May provide technical leadership to a small engineering team for dedicated technical investigation / test.

Bachelor's degree in Avionics / Electrical/ Aerospace Engineering, plus 12-15 years' experience in Avionics systems design and certification.

Able to obtain a Certification Authority Delegation for assigned systems

Working knowledge of Rockwell Collins Proline 21 or Fusion Avionics Systems would be advantageous.

Must have excellent communication skills in English - both written and oral and be PC literate.

Experience in flight-testing of civil aircraft; and knowledge of TCCA, FAA, and EASA certification requirements (ie, FAA CFR Part 25) required.

Mirabel is just outside Montreal, Canada.
 
Job Number: 2304
Job Location: Montreal/Mirabel, Canada
Rate: $63.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 01/17/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Email: tdm@tdm.ca
Website: www.tdm.ca

Aircraft Painter (35) - OR

Description:
Chipton-Ross is seeking 35 Marine Painters for openings in Portland, OR.

RESPONSIBILITIES:
Looking for Marine painters with experience working on Aircraft or Large Boats.

REQUIRED EXPERIENCE:
- 2-3 years experience
- Electrostatic Spray Gun
- High Pressure Spray Gun
- Mini Jet Spray Gun
- Marine, Auto body or Industrial Painters preferably with HVLP (High Volume Low Pressure) air-fed electro-static paint sprayers.
- At least 2+ years of Industrial and/or Commercial marine/transportation painting experience is highly desired.


ADDITIONAL EXPERIENCE:
Refurbishing experience a big plus.

EDUCATION:
High School Diploma

VARIABLE SHIFT
Shifts are 4- 12 hour shifts.
4 days on, 4 days off

ADDITIONAL:

May pay as low as $15 for an entry level position and if candidate doesn't test as well as expected.
Position may be temp to perm or direct placement, depending on client's needs a candidate's testing.
Client will expect testing for all candidates that they are interested in and show that they have an interest in committing to this opportunity. Client will coordinate and pay for round trip flight to Portland and also give one day of per diem. Skills tests are on Wed, Thurs, Fri. If skills test is passed, client will determine if candidate is Jr. or Sr, and make an offer based on results of testing.

May go up to $22/hour for 2-3 yrs expereince with a STRONG skilll set. Client hopes to move those hired to a Senior Painting position within 3 months, and Senior positions there pay $25.

Shifts are 4- 12 hour shifts. 4 days on, 4 days off with a 10-15% shift differential available.


 
Job Number: 162173
Job Location: Portland, OR
Rate: $22 to $25.00 DOE
Duration: PERM
Input Date: 01/23/2018
Firm Name: CHIPTON ROSS
Attention: Leila Morrow
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: lmorrow@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aviation Warranty Coordinators - Atlanta, GA

Description:
STS AeroStaff Services now offers Aviation Warranty Coordinator jobs in Atlanta, Georgia.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Duties:

• The TechOps Supply Chain Warranty team is seeking an experienced professional responsible for execution of aircraft, component, cabin, and engine warranty claim processes
• The successful candidate will collect information to substantiate warranty claims, and process claims to completion
• The role will also support developing improvements to the efficiency, productivity, and performance of the role
• This role will collaborate with both SCM and cross-divisional Tech Ops stakeholders
• The individual should have a minimum of 3 years’ of experience in an operations environment with a large and diverse complement of employees, and ability to work with minimal supervision and complete ownership of projects
• Practice safety conscious behaviors in all operational processes and procedures

Qualifications:

• Bachelor’s degree in Operations, Management, or Aerospace, Mechanical, Industrial Engineering or related discipline is strongly preferred; equivalent A&P License with 3 years’ airline work experience is acceptable
• Understanding of Supply Chain processes and metrics, ability to influence without authority, and work in a matrix environment is a highly preferred
• Advanced computer, analytical, organizational, written and verbal communication skills is highly preferred
• Experience in database mining in the Hyperion or equivalent environment to identify aircraft parts reliability trends is a strong plus
• Candidates with experience in data science or advanced analytics will be strongly considered
• Must be a strong team player, detail oriented, and exhibit a healthy curiosity or interest in aviation
• Candidate should demonstrate the ability to communicate effectively and structure/deliver presentations targeted toward varied audiences including company leadership
• Must be a self-starter able to work independently with limited supervision and effectively prioritize and deliver on tasks
• Only candidates with strong Microsoft Word, PowerPoint, and Excel skills will be considered for this role
• Must be performing satisfactorily in current role

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 40846
Job Location: Atlanta, GA
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 12/06/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

Civil/Industrial Openings

Description:
Hiring in multiple locations

Email your resume or apply online

Benefits Available
- long term contracts
- top per diem rates
- direct deposit
- referral bonuses
- 401(k) program
 
Input Date: 05/09/2017
Firm Name: NESC STAFFING
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
800 Phone: 800/562-3463
Email: lokeefe@nesc.com
Website: www.nesc.com

Controls Software Engineer - direct hire

Description:
JSG is looking for a Controls Software Engineer for our client in Monrovia, CA.

This is a DIRECT HIRE position.


Duties

Pre-sale conceptual design, schedule, and cost estimation of software for semi-automated industrial laser, resistance welding, and vision processing workstations.
Real-time graphical user interfaces for the human machine interface that integrate system operation, motion controllers, resistance welders, laser programming and control, machine vision (Cognex, Keyence), data collection and analysis, file management, and networking capabilities.
Structured, re-useable low-level motion control system code for Delta-Tau and Aerotech motion systems implementing control system, motor tuning, and I/O functions.
Use and creation of dynamic link libraries for selected software-controllable systems components such as: data acquisition and controls, motion controllers, visions systems, lasers, data collection and report generators.
Manufacturing floor automation connectivity software including LAN, database, and other standard interfaces and protocols
Provide support for system acceptance testing conducted by project managers
Work in a team environment with other engineers, production, QA, test, materials control, contract management, and sales personnel
Develop new software under the guidance of the Systems Engineering Project and Planning Manager and Systems Engineering Services Managers needs
Prepare requirements document based on interview with customer and hardware engineers
Prepare interface and functionality documentation for software modules
Develop project plans and schedules for software development work.
Report on progress, demonstrations, and changes to scope
Provide detailed documentation for engineering release and troubleshooting.
Provide manuals for customer operation.
Requirements

PMAC / PeWin32 experience or similar motion controller and integrated development environment experience
Development with Programmable Multiple Axis-Controllers, Aerotech controls, or similar motion controllers is a MUST
Completely knowledgeable in software design tools and environments including: .NET, Visual C++, C#, MFC library, Windows OSs, networking, Vision Pro, and MS Access
Current Experience in C# is preferred.
Strong fundamental background in Software Engineering is a MUST!
Design for long term support and modification
Professional software design and documentation control methodology
Four year degree in computer science, engineering, physics, or related discipline
• Three years+ experience in designing custom motion control and HMI software
• Three years+ experience in designing
 
Job Number: 361964
Job Location: Monrovia, CA
Rate: $115k/yr
Per Diem: no
Overtime: possible
Duration: Direct Hire
Start Date: asap
Input Date: 01/19/2018
Firm Name: JOHNSON SERVICE GROUP
Attention: Rich Martinsen
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Email: rmartinsen@jsginc.com
Website: www.jsginc.com

Electrical Engineer

Description:
PDS is seeking a Electrical Engineer TS I  for an open position in Savannah, GA.
In your role, you will:


Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of products and services

Principal Duties and Responsibilities:

Essential Functions:

1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
2. Performs other duties as assigned

Education and Experience Requirements:



Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 10 yrs in the specific technical discipline or 15 yrs broad engineering experience in several technical disciplines with Bachelors, or 8 yrs in the specific technical discipline with Masters, or 6 yrs in the specific technical discipline with PhD. 

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline

Unique Skills: Candidate shall have experience in one or more of the following: Electronic hardware design, Data acquisition system design, Industrial process measurement

POC: Clyde (813) 426-9917 or ccallwood@pdstech.com 
 
Job Number: 1710071488
Job Location: Savannah, GA
Duration: 6 months
Input Date: 01/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Clyde Callwood
Address: 3922 COCONUT PALM DR STE 100
City, State: TAMPA, FL 33601
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i5000000238B7AAI&URLSource=cjhunter

Electrical Engineer - TX - C

Description:
Chipton Ross is seeking an Electrical Engineer in GRAND PRAIRIE, TX

Start Date: ASAP

Job Description:
Electrical design support will be required to support missile electrical architecture trade studies and concept design. Overall missile electrical design and particular focus for the control actuation system design is required. Candidate may need to work with component suppliers.

The engineer must have an active SECRET security clearance and it is preferred that the employee's investigation is in scope (investigation performed within the past 5 years). The engineer must be proficient in EE toolsets; have good communication skills, and be able to work with internal and external customers.

Mandatory Skills:
Researches, develops, designs, and tests electrical components, equipment, systems, and networks. Designs electrical equipment, facilities, components, products, and systems for commercial, industrial, and domestic purposes. Bachelors degree from an accredited college in a related discipline, or equivalent experience/combined education, with 2 years of professional experience; or no experience required with a related Masters degree. Considered experienced, but still a learner.

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

 
Job Number: 161283
Job Location: Grand Prairie, TX
Rate: Up to $45.00 DOE
Duration: 1 Year
Input Date: 01/23/2018
Firm Name: CHIPTON ROSS
Attention: Robert Davis
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: rdavis@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical/Project Engineer

Description:
Electrical/Project Engineer

Location: Windsor Locks, CT
Pay Rate: $58/hr
Duration: 1 year W2 contract
Shift: First, 8:00am to 5:00pm
**MUST be a U.S. CITIZEN**

Description/Comment:
Manages a team and provides direction on research, development, design, and testing of electrical components, PC Board Layout, Electronics Packaging equipment, facilities, systems, products and networks for commercial, industrial and governmental purposes.

Additional Job Details:
The Human Exploration & Launch business within ISR & Space Systems provides Environmental Control and Life Support Systems in deep space, low earth orbit, undersea, and on the ground. Our hardware is paramount to survival in harsh environments, and our passion for our work demands excellence in everything we do, from the talent we recruit to the highly-engineered systems we deliver. We value people, integrity, ideas and performance. This posting is for a project engineering position at this Company – ISR & Space Systems in Windsor Locks, CT supporting various platforms.
The candidate will work within an Integrated Product Development Team to support the design and development of various electronic controls; will work with the Project Engineer to execute project to meet schedule and budget milestones; and will collaborate with a wide variety of functional areas inside and outside the organization to ensure successful completion of program requirements.

Education
Candidate will have BS in Electrical Engineering with 4 years of working experience in the aerospace industry.

Responsibilities
• Coordinate Integrated Product Development Team activities (design, procurement, fabrication and test)
• Assist Control Account Managers with Earned Value Management (EVMS) by monitoring program cost and schedule performance
• Assist Control Account Manager with Estimate to Complete
• Coordinate activities associated with review and approval of engineering specifications and engineering drawings
• Initiate and process Engineering Changes working with all engineering disciplines to implement approved changes. This will include marking drawings, copying prints, creating PDF’s to support Company electronic Engineering Change process.
• Coordinate, track and support the assembly and test of development hardware
• Support supplier selection and part procurement
• Provide status reports
• Support program reviews both internal and external
• Coordinate closure of action items
• Support operations to fabricate, assemble, test and qualify flight hardware
• Ensure standard work flow maps are complete
• Document activities and programs worked with time spend on various activities. This information will be submitted weekly and summed monthly by person with the monthly invoice.

Skills/Experience
• Ability to perform as part of a cross-functional team and coordinate the activities of various engineering disciplines including electrical and mechanical design, systems, components, materials development, process development, and supplier development
• Strong project management, organizational and prioritization skills
• Ability to work independently or as part of an integrated product team
• Able to understand electrical circuitry and able to recommend trouble shooting test steps to the stakeholders
• Ability to read and understand technical manuals, blueprints or drawings
• Prepare test plans, analyze test data, and prepare reports to support project activity, and maintain up-to-date records of project test results
• Understanding Earned Value Management Basics
• Strong troubleshooting and problem solving skills
• Must understand fundamentals of Root Cause Analysis
• Interface with shop floor personnel for the purpose of communicating technical, quality, and inspection information
• Strong written and verbal skills including thorough knowledge of Microsoft Office products
 
Job Number: 8278
Job Location: Windsor Locks, CT
Rate: 58
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 12/18/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Electronic Installer 1

Description:
PDS Tech, Inc is seeking a candidate for the Electronic Installer 1 position located in St. Rose, LA. 
  • Assists with routine equipment installation, trial runs and service activity runs to ensure that it meets specifications.
  • Provides assistance with training customers to maintain and adjust routine equipment.
  • Performs routine maintenance on tools, test equipment, etc. and completes required service or systems paperwork.
  • Assists with responding to routine service or systems calls. 
  • Performs or assists with installation and checkout of electric and electronic components for systems and service installed jobs and service agreements associated with automatic building controls systems, fire management, security CCTV, audio and energy management systems. 
  • Installs or assists with the installation of conduit, wire, cable, equipment, components and devices associated with fire, security, and energy management systems.
  • Installs and mounts electric / electronic controls, devices, panels, sensors and components.
  • Performs interlock wiring, wiring check out and assists with system start up. 
  • Coordinates with or advises supervision about requirements for material and supplies to ensure timely delivery to job site. 

Knowledge, Skills, and abilities:
High School diploma or GED.
Associates degree or other technical training and mechanical aptitude preferred.
Good verbal and written communication skills.
Must be physically able to climb, work in high and or confined spaces.
Must not be color blind.
QualificationRating
Must Have
Education
HS *Yes
Industrial
LIFT-MODRT *
     

  and 0 Yrs.
Industry
I-INSTRMNT
     

  and 2 Yrs.
Nice to Have
Industrial
ELECT-TRAD
     

  and 2 Yrs.
Industry
I-HVAC
     

  and 2 Yrs.

 
Job Number: 1710071867
Job Location: Saint Rose, LA
Duration: 6 months
Input Date: 01/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Israel Ireneo
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i5000000239EmAAI&URLSource=cjhunter

Facilities Plant Engineer 4 - Top Secret

Description:
PDS Tech is seeking a Facilities Plant Engineer for an open position in North Charleston, SC.
In this position you will:

  • Lead project teams to develops complex conceptual designs, final designs, cost estimates and provides maintenance support for the architectural phases of buildings, equipment installations, utility systems and grounds.
  • Review architectural designs to assess compliance with customer requirements, building codes and applicable regulations by applying knowledge of construction principles, practices, and materials and takes appropriate corrective action.
  • Lead project teams to develops complex conceptual designs, final designs, cost estimates and provides maintenance support for the civil/structural phases of buildings, equipment installations, utility systems and grounds.
  • Review civil/structural designs to assess compliance with customer requirements, building codes and applicable regulations by applying knowledge of construction principles, practices, and materials and takes appropriate corrective action.
  • Lead teams to develop complex conceptual analysis to determine the cause of asset failures and reduction in asset capacity by using reliability tools and methods (e.g., life cycle analysis, condition based maintenance, root cause failure methodology, mean time between failures, fault tree analysis, etc.).
  • Lead others in engineering and facilitating the implementation of complex improvements in asset effectiveness, availability, and maintainability; to specify configuration of new assets in order to support reliability programs.
  • Participate on or leads cross-functional teams to integrate the activities of multiple engineering disciplines, technicians, outside consultants and government agencies.er requirements.
  • Plan, manage, and execute large or complex projects
  • Lead a team of stakeholders in the acquisition and modification of assets to enable the customer to achieve the defined business objectives in accordance with company and accounting policies.
  • Manage project expenditures within authorized budgets.
  • Create, maintain, and communicate project management information.
  • Manage the creation of contract scope.
  • Ensure suppliers comply with all contract obligations. Lead in the interpretation and analysis of applicable regulations, standards, codes, and ordinances with respect to project requirements.
  • Offer project alternatives in order to assure compliance.
  • Provide support, as required, to secure permits.
  • Provide civil/structural construction support for all significant and major projects.
  • Monitor condition of flight line concrete condition.

Education and Experience:
  • Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

 
Job Number: 1710073735
Job Location: Chantilly, VA
Duration: 12 months
Input Date: 01/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Patrick Mahoney
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023HBRAA2&URLSource=cjhunter

Facilities Plant Engineer 4 - VA - C

Description:
Chipton-Ross is seeking a Facilities Plant Engineer for an opening in Springfield, VA.

RESPONSIBILITIES:
Leads project teams to develops complex conceptual designs, final designs, cost estimates and provides maintenance support for the architectural phases of buildings, equipment installations, utility systems and grounds. Reviews architectural designs to assess compliance with customer requirements, building codes and applicable regulations by applying knowledge of construction principles, practices, and materials and takes appropriate corrective action. Leads project teams to develops complex conceptual designs, final designs, cost estimates and provides maintenance support for the civil/structural phases of buildings, equipment installations, utility systems and grounds. Reviews civil/structural designs to assess compliance with customer requirements, building codes and applicable regulations by applying knowledge of construction principles, practices, and materials and takes appropriate corrective action. Leads teams to develop complex conceptual analysis to determine the cause of asset failures and reduction in asset capacity by using reliability tools and methods (e.g., life cycle analysis, condition based maintenance, root cause failure methodology, mean time between failures, fault tree analysis, etc.). Leads others in engineering and facilitating the implementation of complex improvements in asset effectiveness, availability, and maintainability; to specify configuration of new assets in order to support reliability programs. Participates on or leads cross-functional teams to integrate the activities of multiple engineering disciplines, technicians, outside consultants and government agencies.Leads project teams to develops complex conceptual designs, final designs, cost estimates and provides maintenance support for the electrical phases of buildings, equipment installations, utility systems and grounds. Reviews electrical designs to assess compliance with customer requirements, building codes and applicable regulations by applying knowledge of construction principles, practices, and materials and takes appropriate corrective action. Leads project teams to develops complex conceptual designs, final designs, cost estimates and provides maintenance support for the mechanical phases of buildings, equipment installations, utility systems and grounds. Reviews mechanical designs to assess compliance with customer requirements, building codes and applicable regulations by applying knowledge of construction principles, practices, and materials and takes appropriate corrective action. Leads team to ensure accuracy of drawing archives/libraries. Oversees review of contractor redlines. Provides oversight to identify errors and documents construction changes to comply with regulatory requirements, facility standards, and record retention requirements. Leads teams that manage and support complex construction projects by providing input on vendor selection; reviews contractor proposals; interfaces with government/regulatory agencies; monitors project progress and vendor/consultant performance. Oversees preparation and presentation of project information to ensure compliance with applicable construction documents and jurisdictional requirements and to meet project objectives. Leads in the production or procurement of detailed design documents. Uses appropriate resources to produce project drawings, specifications, and permit application packages in accordance with project parameters. Coordinates designs. Reviews and approves documents. Leads in the translation of customer requirements to design options with documents and estimates. Identifies appropriate materials, equipment, and services by applying engineering principles and methodology. Develops and updates design standards and site-specific operating procedures in order to establish common practices. Participates in technical committees. Leads the business decision making process by providing input to strategic, short-term, and long-term infrastructure planning; completes studies; analyzes current conditions and future requirements; recommends capital improvements; gathers and analyzes data; and works with both internal and external customers in order to identify and assess alternatives and impacts. Leads in translation of customer requirements into conceptual design by analyzing intended use/occupancy and desired aesthetics, conducting code research, developing preliminary design elements, determining interdisciplinary engineering support requirements, estimating resource costs/requirements, identifying materials, equipment, and services, and developing initial project schedule in order to establish project scope in response to customer requirements.Plans, manages, and executes large or complex projects. Leads a team of stakeholders in the acquisition and modification of assets to enable the customer to achieve the defined business objectives in accordance with company and accounting policies. Manages project expenditures within authorized budgets. Creates, maintains, and communicates project management information. Manages the creation of contract scope. Ensures suppliers comply with all contract obligations. Leads in the interpretation and analysis of applicable regulations, standards, codes, and ordinances with respect to project requirements. Offers project alternatives in order to assure compliance. Provides support, as required, to secure permits.

EDUCATION:
Accredited Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.


FULL TIME/FIRST SHIFT
WORK HOURS: 8:00 AM - 4:30 PM

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.


 
Job Number: 165303
Job Location: Springfield, VA
Rate: $DOE
Duration: 12 Months
Input Date: 01/23/2018
Firm Name: CHIPTON ROSS
Attention: Brent Sizemore
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: bsizemore@chiptonross.com
Website: www.chiptonross.com

HVAC/Mechanical Engineer

Description:

Primary Responsibilities:



Candidate will be responsible for leading projects, defining scope and responsibilities, leading a team of engineers/designers



Must ensure deliverables meet the scope and client expectations 



Support procurement activities, including coordination with vendors and vendor drawing reviews



Support contractor reviews, and installation planning activities



Individual will travel globally for machine installation, check out and start up



Candidate will plan the work, and track and report work in progress



Will lead a design team for projects, and work with other disciplines to assure the project design is complete and accurate


Qualifications:



 



BS or MS in Mechanical or Chemical Engineering required



7 to 10 years of related experience is required. Experience with an engineering consulting firm is a plus.



Candidate should possess good experience on HVAC systems, utilities and fire systems design



Knowledge of design problems of civil and industrial area of various kinds and, possibly, related to fire protection it would be considered an asset 



Experience in setting, development, evaluation and implementation of projects for air conditioning systems, generation and distribution utilities in the industrial and civil sectors



Knowledge of issues related to the pharmaceutical, consumer products, and chemical industry would be an advantage



Knowledge of boiler systems is preferred



Candidate must be able to calculate heat balance, air balance, mass balance, line sizing, and duct sizin



Knowledge of international standards such as ASME, AMCA, ASHRAE , SMACNA ACGIL are required



Should be able to select and size the boilers, fans, coils, duct, and other HVAC elements



Candidate must possess good communication skills and be able to successfully interact with clients on global project



Microsoft Office experience is required



AutoCAD and SolidWorks experience is preferred



Domestic and international travel will be required


 
Job Number: 1610057836
Job Location: Green Bay, WI
Duration: 4 months
Input Date: 01/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Sue Van Pay
Address: 110 PACKERLAND DR STE A
City, State: GREEN BAY, WI 54303
Phone: 920/499-9943
800 Phone: 800/333-1389
Fax Phone: 920/499-9067
Email: cecjgreenbay@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002FhcTAAS&URLSource=cjhunter

Industrial & Process Engineers

Description:
CAD, CAM, ERP
 
Job Number: 39385/6
Job Location: Florida
Duration: direct
Input Date: 01/15/2018
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Address: 1700 WELLS RD STE 1
City, State: ORANGE PARK, FL 32073-2373
800 Phone: 866/277-3343
Email: jacksonville@apollopros.com
Website: www.apollopros.com

Industrial Engineer

Description:
General Summary:
The Industrial Engineer position provides technical support for the Production Engineering Group working in areas such as manufacturing, design, development, and testing.

Duties and Responsibilities:
  • Provides time studies, capacity analysis (manpower, tooling, capital, and facilities), line balancing, and crew loading, work sampling, and PC computer data analysis.
  • Establishes manpower requirements, line and sub-assembly balancing data, and expectancy time performances, headcount planning, and budgeting concepts.
  • Recommends improvements to manufacturing methods and processes including utilization of personnel, material, and utilities.
  • Collects and analyzes data and metrics and presents the information to large audiences.
  • Provides productivity planning with accompanying future strategies for improvement.
  • Develops and maintains engineered time standards.
  • Applies statistical methods and performs mathematical calculations to determine manufacturing assembly processes, labor requirements, and production standards.
  • Develops and maintains plant standards.
  • Creates and maintains valve stream maps.
  • Plans, schedules, and prioritizes work to meet established deadlines.
  • Drafts and designs layout of equipment, materials, and work centers to optimize material flow, labor efficiency, safety, quality, productivity, and ergonomics.
  • Determines and improves processes to meet production levels.
  • Schedules and sequences job plans (with ME approval) to support effective work flow.
  • Supports work specific to detail parts manufacturing and assembly operations of composite and metallic aerospace hardware within a manufacturing environment.
  • Develops documentation and procedures to ensure compliance specific to customer and regulatory production requirements and specifications.

Education, Work Experience, Certification and/or Licensure:
Bachelor’s Degree (Manufacturing, Manufacturing Engineering, Industrial Engineering, Aerospace Engineering, Industrial Technology, or equivalent technical major) required.
Experience in aerospace industry in aerospace manufacturing a plus.

Knowledge, Skills and Abilities:
  • Strong analytical and innovative skills.
  • Strong work ethic.
  • Ability to multitask.
  • Ability to work under minimal supervision.
  • Detail oriented.
  • Excellent problem solving skills.
  • Ability to read and interpret engineering drawing and/or specification requirements.
  • Excellent communication skills, both verbal and written.
  • Excellent presentation skills.


Physical Requirements:

  • Incumbents may be routinely exposed to equipment operational noise heat-cold-dust, and/or aircraft equipment, parts, or fuel odors.
  • Incumbents may be required to stand, sit, squat, walk, bend, move, reach, or stretch for prolonged time periods with no restrictions, as required by job duties.
  • Work in a safe and professional manner while adhering to all regulatory requirements (FAA, OSHA, DOT, EPA, State, and Federal regulations, etc.).
  • Read, hear, speak, and see with no restrictions, as required by job duties.
  • Comprehend and adhere to management directions and/or safety instructions with no restrictions.
  • Effectively communicate in Business English language.
  • Pull, push, carry, lift, or move items up to 10 lbs. throughout the work shift without assistance, as required by job duties.
  • Pull, push, carry, lift or move materials/people/items/equipment weighing up to 50lbs or more during the work shift, with the use of Company provided “reach assistance technology” or “movement assist technology” (fork-lifts, pallet jacks, pulleys, dolly’s, robotics reach equipment, people movers etc.), as required by job duties.   

 
Job Number: 1710071796
Job Location: Greensboro, NC
Duration: 12 months
Input Date: 01/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Lucinda Contreras
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002390MAAQ&URLSource=cjhunter

Industrial Engineer

Description:
-Holiday Pay
-Medical
-Dental
-Vision
-Short-Term Disability
-Direct Deposit
-401(k) Immediate Enrollment
-Annual Bonus
-Referrals
-Personal Communications
 
Input Date: 01/23/2017
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545, 817/354-5555
800 Phone: 866/758-2494
Email: resumes@agentetech.com
Website: www.agentetech.com

Industrial Engineer - 2- DoD Secret and Special Access Clearance

Description:
PDS Tech, Inc. is seeking a candidate for Industrial Engineer - 2- DoD Secret and Special Access Clearance position located in Moss Point, MS. 

Position Summary / Responsibilities



  • Analyzes and designs sequence of operations and work flow to improve efficiencies in plant and production facilities and equipment layouts; and establishes methods for maximum utilization of production facilities and personnel.
  • May establish or assist in establishing accident prevention measures and may manage training programs for personnel concerning all phases of production operations.
  • Conducts studies pertaining to cost control, cost reduction, inventory control, and production record systems.
  • On the basis of these studies, develops and implements plans and programs for facility modifications and revisions to operating methods.
  • May assist facilities engineers in the planning and design of facilities.

Qualifications:
Basic Qualifications:
  • Bachelors of Science Degree in Science, Technology, Engineering or Math (STEM), and 2 years relevant work experience. 
  • The ideal candidate will have experience in an Industrial Engineering role, aerospace manufacturing processes, MES/SAP and EVMS. 
  • Must be able to Obtain and Maintain an Active Secret Clearance with SAP.

 
Preferred Qualifications:

  • Active DoD Secret and Special Access Clearance.

 
Job Number: 1710072335
Job Location: Moss Point, MS
Duration: 23 months
Input Date: 01/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Lucinda Contreras
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023AaZAAU&URLSource=cjhunter

Industrial Engineer 2 (4) - FL - O/M

Description:
Chipton-Ross is seeking 4 Industrial Engineers for openings in Jacksonville, FL.

RESPONSIBILITIES:
Applies Industrial Engineering concepts, techniques, analysis and decision tools under general supervision to promote and assist in implementing changes in manufacturing, engineering and service operations. Applies general industrial engineering techniques and concepts to product and process design teams throughout all phases of product lifecycle, resulting in a robust product design and work statement that meets program requirements. Assist in research, design, development, improvement and implementation of processes to enhance schedule performance, lower cost, and improve quality, through the application of Lean and other Industrial Engineering concepts for large scale systems integration and asset utilization. Under general supervision, manages, defines, negotiates, and controls the scope, cost, and timing of projects, and performs risk analysis using project management tools (e.g., work break-down structure, precedence network, resource allocation). Provides support to project completion.Strong scheduling experience desired with familiarity in Microsoft Project or other scheduling related software. Familiarity with critical path methodology and project management.

EDUCATION:
Accredited Bachelor's degree and typically 2 or more years' experience in an engineering classification or an accredited Master's degree with experience in an engineering classification. Required: Bachelor or Master degree from an accredited course of study, in engineering.

FULL TIME/FIRST SHIFT
WORK HOURS: 6:00 AM - 2:30 PM

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

 
Job Number: 166116
Job Location: Jacksonville, FL
Rate: $DOE
Duration: 5 Months
Input Date: 01/23/2018
Firm Name: CHIPTON ROSS
Attention: Brent Sizemore
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: bsizemore@chiptonross.com
Website: www.chiptonross.com

Industrial Engineer 2 - Secret

Description:
PDS Tech is seeking an Industrial Engineer for an open position in Jacksonville, FL.
In your role, you will:

  • Applies basic Industrial Engineering concepts, techniques, analysis and decision tools to promote and implement changes in manufacturing, engineering and service operations.
  • Develops models, data bases and spreadsheets to analyze data (e.g., statistics, operations research, engineering economics), and provide summary analysis and metrics as directed by higher level employees for consultation to customers (e.g., management, departments, suppliers).
  • Applies basic industrial engineering techniques and concepts to product and process design teams throughout all phases of product lifecycle, resulting in a robust product design and work statement that meets program requirements.
  • Researches, designs, develops, improves, and implements processes as directed to enhance schedule performance, lower cost, and improve quality, through the application of Lean and other Industrial Engineering concepts for large scale systems integration and asset utilization.
  • Utilizes engineering methods (e.g., mathematical models, simulation, statistics) to assist in developing optimal process designs and efficient utilization of resources (e.g., facilities, personnel, materials, equipment) in the creation and validation of products.
  • Analyzes and supports the design of the value stream, including capability, capacity (e.g., make/buy, supplier selection, risk analysis, supplier performance), throughput, work flow and logistics (e.g., critical path, lead-time, transportation, factory layout).

As our ideal candidate, you will meet the following requirements:
  • Bachelor's degree in an engineering classification from an accredited course of study, in engineering, computer science, mathematics, physics, or chemistry.

 
Job Number: 1710076634
Job Location: Jacksonville, FL
Duration: 5 months
Input Date: 01/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Jyotsna Sivan
Address: 900 CIRCLE 75 PKWY SE STE 600
City, State: ATLANTA, GA 30339
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023Nr5AAE&URLSource=cjhunter

Industrial Engineer 3

Description:
PDS Tech is seeking an Industrial Engineer for an open position in Berkeley, MO
In your role you will:

  • Independently develops models, data bases and spreadsheets to analyze data (e.g., statistics, operations research, engineering economics), and provides summary analysis and metrics for consultation to customers (e.g., management, departments, suppliers).
  • Applies advanced industrial engineering techniques and concepts to product and process design teams throughout all phases of product lifecycle, resulting in a robust product design and work statement that meets program requirements.
  • Researches, designs, develops, improves, and implements processes to enhance schedule performance, lower cost, and improve quality, through the application of advanced Lean and other Industrial Engineering concepts for large scale systems integration and asset utilization.
  • Independently manages, defines, negotiates, and controls the scope, cost, and timing of projects, and performs risk analysis using project management tools (e.g., work break-down structure, precedence network, resource allocation).
  • Ensures project is completed within budget.
  • Utilizes advanced engineering methods to develop optimal process designs and efficient utilization of resources in the creation and validation of products.
  • Analyzes and designs value stream, including capability, capacity, throughput, work flow and logistics.
     

Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification.
 
Job Number: 1710073315
Job Location: Saint Louis, MO
Duration: 6 months
Input Date: 01/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023G1mAAE&URLSource=cjhunter

Industrial Engineer II (FL)

Description:
US Citizen Only. Interim Secret Not Required To Start

SEVERAL OPENINGS IN JACKSONVILLE, FL.

Applies Industrial Engineering concepts, techniques, analysis and decision tools under general supervision to promote and assist in implementing changes in manufacturing, engineering and service operations. Assists in developing models, data bases and spreadsheets to analyze data (e.g., statistics, operations research, engineering economics), and provides summary analysis and metrics for consultation to customers (e.g., management, departments, suppliers). Applies general industrial engineering techniques and concepts to product and process design teams throughout all phases of product lifecycle, resulting in a robust product design and work statement that meets program requirements. Assist in research, design, development, improvement and implementation of processes to enhance schedule performance, lower cost, and improve quality, through the application of Lean and other Industrial Engineering concepts for large scale systems integration and asset utilization. Under general supervision, manages, defines, negotiates, and controls the scope, cost, and timing of projects, and performs risk analysis using project management tools (e.g., work break-down structure, precedence network, resource allocation). Provides support to project completion. Utilizes engineering methods (e.g., mathematical models, simulation, statistics) to support the development of optimal process designs and efficient utilization of resources (e.g., facilities, personnel, materials, equipment) in the creation and validation of products. Under general direction, analyzes and designs value stream, including capability, capacity (e.g., make/buy, supplier selection, risk analysis, supplier performance), throughput, work flow and logistics (e.g., critical path, lead-time, transportation, factory layout).

Must be comfortable working in a factory environment, working closely with the build team.

Bachelor's degree and typically 2 or more years' experience in an engineering classification or a Master's degree with experience in an engineering classification. Required: Bachelor or Master degree from an accredited course of study, in engineering.

ACS Group (formerly 'Comforce')
 
Job Number: IEIIFL
Job Location: Jacksonville, FL
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 5+ Months
Start Date: ASAP
Input Date: 01/19/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Email: janice.plattner@acsicorp.com
Website: www.acsicorp.com

Industrial Engineers

Description:
ACS Group has been in the aerospace industry for over 30 years - Helping top talent in the aerospace industry find exceptional careers! Positions available now

-Medical
-Dental
-Per Diem
-401(k)
-Life
-Vision

Please email us to see if your background matches any of our job openings
 
Job Location: Jacksonville, FL
Input Date: 12/05/2017
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner or Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321 or 425/605-2312
Email: janice.plattner@acsicorp.com; andrew.walbert@comforce.com
Website: www.acsicorp.com

Information System Security Officer (ISSO) with active secret FL

Description:
Job Title: Information System Security Officer (ISSO)
Keywords:
Number of Positions: 1

Remaining Positions: 1

Duties:
** An active SECRET (or higher) DoD Security Clearance is required **



** A current DoD 8570 Baseline Certification (Security+ CE, CAP, GSLC, CASP CE, CISA, CISM, or CISSP) is required **



** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **



-The ISSO is responsible for ensuring the appropriate operational security posture is maintained for an information system (IS) and as such, works in close collaboration with the Information System Security Manager (ISSM).

-The ISSO shall have the detailed knowledge and expertise required to manage the security aspects of an IS and is assigned responsibility for the day-to-day security operations of a system.

-Responsibilities also include physical and environmental protection, personnel security, incident handling, and security training and awareness.

-In close coordination with the ISSM, the ISSO plays an active role in monitoring a system and its environment of operation to include developing and updating the System Security Plan (SSP), managing and controlling changes to the system, and assessing the security impact of those changes.



Responsibilities of the ISSO include, but are not limited to:

a. Ensure systems are operated, maintained, and disposed of in accordance with security policies and procedures as outlined in the security authorization package;

b. Attend technical and security training (e.g., operating system, networking, security management) relative to assigned duties;

c. Ensure all users have the requisite security clearances, authorization, need-to-know, and are aware of their security responsibilities before granting access to the IS;

d. Report all security-related incidents to the ISSM;

e. Conduct periodic reviews of ISs to ensure compliance with the security authorization package;

f. Serve as member of the CCB, if designated by the ISSM;

g. Coordinate any changes or modifications to hardware, software, or firmware of a system with the ISSM prior to the change;

h. Formally notify the ISSM when changes occur that might affect system authorization;

i. Monitor system recovery processes to ensure security features and procedures are properly restored and functioning correctly;

j. Ensure all IS security-related documentation is current and accessible to properly authorized individuals;

k. Ensure audit records are collected and reviewed; and

l. ISSO shall be adequately trained and possesses technical competence commensurate with the complexity of the ISs.

Skills:
Minimum Qualifications

- Current SECRET (or higher) DoD Security Clearance

- Current DoD 8570 Baseline Certification (Security+ CE, CAP, GSLC, CASP CE, CISA, CISM, or CISSP)

- Experience with Microsoft Windows and/or Linux system administration (2+ years)

- Familiarity with configuration control and change management (SCCM)

- Experience with networking concepts (switches, network security, TACLANE)

- Experience with security concepts (Data Loss Prevention, Active Directory, and Security Log Analysis)

- Active and continuous learner - either higher education or Continuing Professional Education



Required Competencies

- Strong written and verbal communication skills; ability to present reports to management; motivated to thoroughly investigate, analyze, and document system issues and resolutions

- Ability to produce quality deliverables and to complete assigned projects on time; provides consistent status updates to ensure IT security projects stay focused

- Consistent attention to detail - completes tasks per standard operating procedures; reports discovered anomalies and inconsistencies

- Persistent and creative problem solver - strong troubleshooting skills and determined to find solutions to technical problems; identifies root cause and presents possible solutions to management

- Strong work ethic and a proven professional - respectful, dependable, takes initiative and follows through, dedicated to excellence and getting the job done



Preferred Competencies

- Operating System and networking certifications

- Knowledge of and experience with compliance to government regulations and standards (NIST Special Publications, NISPOM, Risk Management Framework, etc.)

- Direct experience with a Department of Defense (DoD) or Defense Industrial Base (DIB) company supporting critical information systems



Additional Details

The ideal candidate for this position must be able to:

- Report to work on time

- Perform job duties for a specific duration of time or within a given period of time

- Follow directions based on government requirements and company policies

- Interact well with co-workers and customers

- Accept constructive criticism

- Maintain regular/consistent attendance and a full-time schedule

- Maintain current status on projects

- Stay current on training requirements

- Solve issues and incidents in the field and be willing to work after hours as needed to complete an urgent and important task

- Effective service depends upon the contractors performing duties to the best of their abilities; frequent absences will disrupt business operations and create additional work for coworkers; prompt and regular attendance is critical to the success of the company's mission.



Education:
- Undergraduate degree in Information Technology or Cyber Security, but candidate with proven experience will not be excluded from consideration

- Current DoD 8570 Baseline Certification (Security+ CE, CAP, GSLC, CASP CE, CISA, CISM, or CISSP)


Skills:
Required

CYBER SECURITYLINUX

State/Province: Florida
City/Town: Jupiter

Start Date: 01/08/2018 Hours Per Week: 40.00
Est. End Date: 06/29/2018 Hours Per Day: 8.00
Schedule Notes: Days Per Week: 5.00
 
Job Number: MB-7631875
Job Location: Jupiter, FL
Rate: 52/hr max
Duration: 6 month contract
Input Date: 01/23/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

Instrument Project Engineer - I/C Engineer - Petro (TX)

Description:
Job Description for an Instrument/Controls System Project Engineer

Basic Function
An Instrument Project Engineer (IE) is responsible for the design and implementation of process instrumentation from initial conception through field installation. They are responsible for designs that provide the most reliable and cost-effective instrument systems. In addition, the IE provides consulting services to process designers in developing process design specifications, develops operating and training manuals for mechanical and process personnel and participates in training operating personnel.

An IE:
• Writes purchase and construction specifications and writes and performs Factory Acceptance Tests.
• Uses vendor software programs for sizing safety and control valves.
• Specifies, procures, and configures Programmable Logic Controllers (PLC) and field hardware such as transmitters, controllers, pneumatic and electronic transmission system.
• Utilizes standards and best practices from American Petroleum Institute (API) and International Society of Automation (ISA), National Fire Protection Association (NFPA) to perform the above functions.

Responsibilities.
The Instrument and Controls Engineer may be responsible for:
• Function as project engineer on instrumentation and capital projects and large maintenance projects.
• Taking lead role on Instrumentation and controls capital projects including PLCs.
• Help identify areas where instrumentation/controls can improve plant operations and profitability.
• Developing capital and expense budget requirements related to instrumentation system upgrades, PM/PdM programs, repairs, expansions, etc.
• Serving as a technical resource to properly identify new and existing equipment specifications and proper operating parameters/ranges for instrumentation equipment.
• Overseeing application and interpretation of National Electric Code and other applicable city, state, federal codes and standards (e.g. NPRA, NFPA, API, ISA).
• Interact with Engineering and Construction contractors, both on-site and off-site.
• Leverage the application of instrumentation safety standards, mechanical integrity, design and maintenance.
• Using documentation systems and processes that maintain accurate instrumentation information and drawings.
• Support criticality assessments of the plant's instrumentation equipment.
• Design and evaluate Refinery Safety Instrumented Systems (SIS). Perform Safety Integrity Level (SIL) analysis and engineering upgrades of safety instrumented systems.

Basic Required Qualifications.
• Must be legally authorized to work in the United States, at least 18 years of age and possess a valid driver’s license.
• Must possess a bachelor’s degree in Electrical Engineering, Chemical Engineering, Mechanical Engineering, or Industrial Engineering.
• Must have three or more years of instrumentation experience and three or more years of direct experience in a refinery, chemical and/or manufacturing industry.
• Demonstrated knowledge and use of SPI (InTools) database and specifications.
• Proficient in the specification, troubleshooting, maintenance and overhaul of process control values.
• Demonstrated knowledge of PLC's.
• Proficient in MS office (Word, Excel, Outlook, Projects).
• Must be willing and able to perform, comply with the following:
• Wear Nomex fire retardant clothing and personal protective equipment (such as steel-toe shoes, ear, and eye protection).
• Maintain face daily so that a respirator/face mask can seal properly (some examples include being free of facial hair and/or clean shaven), climb up to 200 feet in height and work in enclosed spaces such as tanks and silos

Preferred Qualifications:
• Industry certifications (ISA)

FOSTER DESIGN'S BENEFITS:
• Working for a 54-year old company
• Minimum 10 Paid Holidays with no waiting period
• Immediate 401K participation, 1 year 100% vesting schedule, matching employer contribution
• Free Financial Consultant
• Medical/Dental/Vision/Prescription card – BCBS
• MetLife – Long Term Disability Insurance
• Vacation Pay
• Per Diem Split, when applicable
• Paid Weekly (Direct Deposit)
 
Job Number: FD-11018TX
Job Location: Borger, TX
Rate: $BOE/HR
Per Diem: Possible
Overtime: Possible
Duration: 11 Months or linger
Start Date: ASAP
Input Date: 01/19/2018
Firm Name: FOSTER DESIGN INC
Attention: Recruiter
Address: 200 W DOUGLAS AVE STE 110
City, State: WICHITA, KS 67202
Phone: 316/832-9700
800 Phone: 800/345-3394
Fax Phone: 316/832-9357
Email: contract@fosterdes.com
Website: www.fosterdes.com

Lead Laser Controls Senior Software Developer-OM

Description:

Lead Laser Controls Senior Software Developer

Chipton-Ross is seeking a Sr. Software Developer Lead capable of leading the development of the High Energy Laser control systems, signal and image processing programs.
This individual will also lead new business pursuits related to both airborne active and passive multi-spectral EO/IR sensors for surveillance, targeting, laser acoustic signal processing, 3D LIDAR image formation and mapping, and target recognition located in Rancho Bernardo, CA.

DUTIES AND RESPONSIBILITIES:
Provide technical leadership to a software development team for High Energy Laser control system development.
Manage schedules and report progress to program leadership.
Responsible for leading the development of High Energy Laser control systems including leading a team of developers, developing a system architecture that includes subsystem and segment interfaces, such as battle management, safety, and fire control.
Specify throughput, processing architecture, and I/O bandwidth requirements.
Support field tests.
Provide schedule, tasks, and work definitions for software implementation.
Represent GA-EMS LAS SWIPE group to customers internal and external on technical approach and schedule.
Identify risks and solutions necessary to meet demanding program schedules, recommend approach that moderate risk while meeting overall performance requirements.
Provide technical briefings to internal and external customers.
Provide technical documents on design and performance analyses.
Performs other duties as assigned of required.


Essential Qualifications:
Typically requires a bachelors degree, masters degree or PhD in computer science, information systems or related discipline and progressive software development experience as follows; fifteen or more years of experience with a bachelors degree, thirteen or more years of experience with a masters degree, or ten or more years with a PhD. May substitute equivalent experience in lieu of education.
Must have a detailed and extensive expertise of software development concepts, principles, and theory and have applied that knowledge in the development of new principles and concepts.
Demonstrated project and/or program leadership skills including organizing, planning, scheduling, and coordinating workloads to meet established project deadlines or milestones.
Must possess the ability to contribute to the development of new concepts and principles; resolve unusually complex problems; serve as spokesperson on projects and/or programs; and be an expert in one or more areas of software development.
Strong communication, presentation, and interpersonal skills are required enabling an effective leadership interface with other departments, all levels of management, professional and support staff, customers, potential customers, and government representatives.
Customer focused, formulates plans based on the development of innovative new designs in resolving advanced software development problems.
Must be able to work on a self-initiated basis and in a team environment.


Hard Requirements:
Typically requires a bachelors degree, masters degree or PhD in computer science, information systems or related discipline and progressive software development experience as follows; fifteen or more years of experience with a bachelors degree, thirteen or more years of experience with a masters degree, or ten or more years with a PhD. May substitute equivalent experience in lieu of education.
Ability to obtain and maintain a Security Clearance is required.
The successful candidate will have a wide range of experience developing complicated software systems distributed among heterogeneous computing environments.
Demonstrated knowledge of VxWorks and Linux is required.
In-depth knowledge of embedded hardware and software is required.
Extensive knowledge of C and C++ is required.
Must have a detailed and extensive expertise of software development concepts, principles, and theory and have applied that knowledge in the development of new principles and concepts.
Demonstrated project and/or program leadership skills including organizing, planning, scheduling, and coordinating workloads to meet established project deadlines or milestones.
Must possess the ability to contribute to the development of new concepts and principles; resolve unusually complex problems; serve as spokesperson on projects and/or programs; and be an expert in one or more areas of software development.
Strong communication, presentation, and interpersonal skills are required enabling an effective leadership interface with other departments, all levels of management, professional and support staff, customers, potential customers, and government representatives.
Customer focused, formulates plans based on the development of innovative new designs in resolving advanced software development problems.
Must be able to work on a self-initiated basis and in a team environment.
Able to work extended hours as required.

MISC:
Able to work extended hours as required.
Duration: 6 month temp to hire

San Diego, California
Work Week: 5/40


About the client:
Client, and its affiliated companies, is one of the worlds leading resources for high-technology systems development ranging from the nuclear fuel cycle to remotely piloted aircraft, airborne sensors, and advanced electric, electronic, wireless and laser technologies.

Cleint's Electromagnetic Systems (GA-EMS) designs and manufactures first-of-a-kind electromagnetic and electric power generation systems. GA-EMS expanding portfolio of specialized products and integrated system solutions support critical fleet, space systems and satellites, missile defense, power and energy, and process and monitoring applications for defense, industrial, and commercial customers worldwide.


 
Job Number: 165947
Job Location: San Diego, CA
Rate: $DOE
Duration: 6 months Contract to Perm
Input Date: 01/23/2018
Firm Name: CHIPTON ROSS
Attention: Max Cameron
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: mcameron@chiptonross.com
Website: www.chiptonross.com

Lead Systems Engineer -Secret

Description:
PDS Tech Inc is seeking a Lead Systems Engineer for an open position in Herndon, VA

Main duties will include, but not be restricted to:



  • Managing an engineering team that integrate existing payloads onto the  satellite buses
  • Development of satellite constellation architectures in support of DoD/Intelligence Community requirements
  • Interface with US Government and industrial partners technical teams to explain the capabilities of satellites
  • Lead the team responsible for writing the technical components of RFPs to the US government agencies
  • Speak at public events and conferences
  • Serve as the chief engineer for OneWeb based satellite programs

Skills and Qualifications:



  • Experience working with US DoD and Intelligence Community Space professionals.
  • 10+ years experience working as a design engineer on satellites
  • Bachelor's degree in STEM field and Masters degree in Systems Engineering would be a plus.
  • Experience tailoring an existing satellite to meet new requirement.
  • Experience in Program Management.
  • Understanding of Military Space acquisition process.
  • Existing relationships with Government Program Offices.
  • A strong technical grasp of existing and future DoD/IC Space Programs.
  • Proven ability to work to create meaningful output to guide and open business.
  • Ability to build and maintain strategic relationships with key partners and customers.
  • Excellent verbal and written skills in English, other language skills would be advantageous (French and German).
  • Ability to work in a team and demonstrate good interpersonal skills.
  • Ability to obtain relevant security clearances (TS/SCI).
  • US citizenship

 
Job Number: 1710070877
Job Location: Herndon, VA
Duration: 6 months
Input Date: 01/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Rebecca Burrows
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023682AAA&URLSource=cjhunter

Maintenance Mechanic

Description:
Our client in Pinellas Park is looking for a Maintenance Mechanic to fulfill a 12 month contract assignment.  In this role you will:

  • Performs various facilities maintenance duties including: Heavy Preventive Maintenance on systems and equipment.





  • Performs basic carpentry, electrical, mechanical, air conditioning, plumbing, plastic or sheet metal fabrication, or associated work on plant facilities using power tools.





  • Light janitorial duties expected.



  • May perform routine inspections to determine repair and maintenance work necessary.





Required Skills and Education:

  • Basic equipment/machines repair (NOT PARTS) and troubleshooting skills, for both electrical and hydraulic systems.
  • Carpentry and plumbing experience required.


  • Strong troubleshooting/diagnostic skills; proficient with multi-meter
  • Electrical Controls and PLC experience/troubleshooting (ability to program is desired)
  • Hydraulic experience (Pump repair/rebuilding; servo valve repair, etc.) to include reading hydraulic schematics
  • Extensive equipment maintenance including HVACR experience (troubleshooting and repair, with EPA 608 cert)
  • Light fabrication skills/Mill and Lathe experience (making simple parts like brackets and spacers);
  • Commercial plumbing repairs
  • Industrial electrical experience (480V, 230V and 120V, running and bending conduit, proper wire sizing for required tasks, etc.)



 


Minimum Requirements:

  •  High School Diploma or equivalent.
  • Mathematical ability to perform and/or understand the calculations used in assigned areas and ability to read and interpret blueprints, specifications and technical data.
  • Competently uses computers and other systems to access, maintain and manipulate data.
  • Interpersonal skills and the ability to interface with all levels, to work in teams or independently and communicate effectively with all co-workers or supervisory leads.


 

 
Job Number: 1710078383
Job Location: Pinellas Park, FL
Per Diem: No
Duration: 12 months
Input Date: 01/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Jordan Smith
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023T3gAAE&URLSource=cjhunter

Maintenance Mechanic - Level 1 - FL

Description:
Chipton-Ross is seeking a Maintenance Mechanic for an opening in Pinellas Park, FL.

RESPONSIBILITIES
Typical minimums: High School Diploma or equivalent. Mathematical ability to perform and/or understand the calculations used in assigned areas and ability to read and interpret blueprints, specifications and technical data.
Competently uses computers and other systems to access, maintain and manipulate data.
Interpersonal skills and the ability to interface with all levels, to work in teams or independently and communicate effectively with all co-workers or supervisory staff.
" Performs various facilities maintenance duties including: Heavy Preventive Maintenance on systems and equipment.
" Performs basic carpentry, electrical, mechanical, air conditioning, plumbing, plastic or sheet metal fabrication, or associated work on plant facilities using power tools.
" Light janitorial duties expected.
" May perform routine inspections to determine repair and maintenance work necessary.

REQUIREMENTS
" Basic equipment/machines repair (NOT PARTS) and troubleshooting skills, for both electrical and hydraulic systems.
" Carpentry and plumbing experience required.
" Strong troubleshooting/diagnostic skills; proficient with multi-meter
" Electrical Controls and PLC experience/troubleshooting (ability to program is desired)
" Hydraulic experience (Pump repair/rebuilding; servo valve repair, etc.) to include reading hydraulic schematics
" Extensive equipment maintenance including HVACR experience (troubleshooting and repair, with EPA 608 cert)
" Light fabrication skills/Mill and Lathe experience (making simple parts like brackets and spacers);
" Commercial plumbing repairs
" Industrial electrical experience (480V, 230V and 120V, running and bending conduit, proper wire sizing for required tasks, etc.)

SHIFT
1st Shift: 6:30am to 5:00pm
4/10 work schedule
 
Job Number: 166611
Job Location: Pinellas Park, FL
Rate: $16 to $22.00 DOE
Duration: 12 Months
Input Date: 01/23/2018
Firm Name: CHIPTON ROSS
Attention: Erin Simmons
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: esimmons@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II - (FL)

Description:
SEVERAL OPENINGS IN THE JACKSONVILLE, FL AREA

Interim Secret NOT REQUIRED to start. US Citizen only.

Assists in the development and implementation of production planning and tooling methodologies. Participates as a member of an Integrated Product Team (IPT) in the integration of technical solutions. Works with others to develop, identify and implement conceptual designs and maintenance of the program architecture for build. Assists in implementing manufacturing plans and bill of materials. Resolves technical problems and assists in the implementation of new engineering principles, theories, advanced technologies and concepts. Assists in the implementation of Lean principles and technologies. Interfaces with professional associations, suppliers, IPTs and internal customers to develop products, skills, knowledge and experience.

Prefer Experience in post-production electrical routing and terminations; creation of graphic aids from model based definition; experience in HMS-CAPP and TeamCenter. Working with Design Engineering, Manufacturing Engineering/Planning, Quality Engineering, Liaison Engineering, Industrial Engineering and Operations to resolve Work Instruction and Design constraints.

Bachelor's degree and typically 2 or more years' experience in an engineering classification or a Master's degree with experience in an engineering classification. Required: Bachelor or Master degree from an accredited course of study, in engineering
 
Job Number: MFGEIIfl
Job Location: Jacksonville, FL
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 4+ Months
Start Date: ASAP
Input Date: 12/08/2017
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

Manufacturing Engineer II/III

Description:
Location: Canoga Park, CA
Rate: $30.00 - $48.00/HR (DOE)
Duration: 6 month contract
Shift: Regular 40 hour week. OT Possible


** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


** Looking for go getters with positive, can-do attitudes. Candidates must be open to learning and be able to take initiative. This is by far the most important attribute needed **


Duties:
The Manufacturing Engineer classifications are responsible for design, fabrication, modification, analysis and evaluation of manufacturing operations, processes, procedures and production layouts for the support of manufacturing/assembly operations such as rocket motor propellant and/or insulation manufacture, equipment installation, machining, metal forming, welding and brazing, and material handling.


Skills:
Required Skills:
-Designing and planning of layout component fabrication, assembly and material handling, planning of sequence of operations, and specification procedures.
-The scope of responsibility will be for several mechanical components or as a process engineer supporting new and developing process.

Desired Skills:
-Tight tolerance machining, Welding, Design systems (ProE, CATIA, VisMockup, CAD/virtual manufacturing) .
-Manufacturing fabrication and assembly processes and systems. Verbal and written communication.
-Project management skills and MS Office applications ( Word, Excel).
-Experience with Maestro, Delmia and Windchill are preferred, not required.
-Aerospace experience preferred but not required.

Keywords:
-Manufacturing Engineer
-Propulsion components


Education:
- BS degree in Manufacturing /Industrial Technology or Engineering required
 
Job Number: 8010
Job Location: Canoga Park, CA
Rate: $30.00 - $48.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Input Date: 01/17/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

Manufacturing Engineer II/III CA

Description:
Job Title: Manufacturing Engineer II/III
48/hr max

Number of Positions: 10



Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **



** Looking for go getters with positive, can-do attitudes. Candidates must be open to learning and be able to take initiative. This is by far the most important attribute needed **
Also, Delmia, Maestro and Windchill are preferred, not required.




-There are two (2) Level II openings and two (2) Level III openings.



The Manufacturing Engineer classifications are responsible for design, fabrication, modification, analysis and evaluation of manufacturing operations, processes, procedures and production layouts for the support of manufacturing/assembly operations such as rocket motor propellant and/or insulation manufacture, equipment installation, machining, metal forming, welding and brazing, and material handling.

Skills:
Required Skills:

-Designing and planning of layout component fabrication, assembly and material handling, planning of sequence of operations, and specification procedures.

-The scope of responsibility will be for several mechanical components or as a process engineer supporting new and developing process.



Desired Skills:

-Tight tolerance machining, Welding, Design systems (ProE, CATIA, VisMockup, CAD/virtual manufacturing) .
-Manufacturing fabrication and assembly processes and systems.Verbal and written communication.

-Project management skills and MS Office applications ( Word, Excel).

-Experience with Maestro, Delmia and Windchill are preferred, not required.

-Aerospace experience preferred but not required.



Keywords:

-Manufacturing Engineer

-Propulsion components

Education:
BS degree in Manufacturing /Industrial Technology or Engineering required

Skills:
Required

MANUFACTURING ENGINEERAEROSPACE

State/Province: California
City/Town: Canoga Park

Start Date: 10/23/2017 Hours Per Week: 40.00
Est. End Date: 04/22/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7347633
Job Location: Canoga Park, CA
Rate: 48/hr max
Duration: 6 month contract
Input Date: 01/23/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

Master Scheduler

Description:
PDS Tech is seeking a Scheduler for a position in St. Louis, MO 
  • Military/Defense Program experience is desired. 
  • Must have an active Secret Clearance to be considered 
  • Earned Value Management System (EVMS) experience is highly desired 


Job Purpose


Maintain synchronization of the supply chain between various organizations, customers, and suppliers by managing product requirements, inventory systems, and production flow of work in process.  Coordinate with management, internal support and shop floor personnel regarding all issues impacting the supply chain and schedule adherence 
 
 Principal Accountabilities

  • Develop and implement strategy to leverage master production schedule to meet deliveries by using Microsoft Project to develop and maintain a fluid IMS schedule. Ensure the appropriate lead times and requirements in keeping with these strategies.  
  • Develop work schedules for the assigned value streams and Operational Work Cells for to the ERP Analyst. The schedules are to be driven by the Master Production Schedule and coordinated with all functions.
  • Work with complex processes and organizational relationships that improve the capabilities of SCM and contribute to the improvement of the business enterprise.  
  • Interface with program management to ensure alignment between schedule and customer requirements. Work closely with program supply chain support and customer demand to ensure the system demand is aligned to customer requirements.
  • Responsible to manage and maintain visibility of capacity by working with operations to ensure the schedule derived from the MPS is achievable.
  • Responsible for updating and maintained the build plans (Auto Planner) for all areas to ensure the right requirements are flowed through MRP for detail parts and raw materials.
  • Define problem resolutions and process improvements.
  • Incorporate planning decisions to reduce material and product variability.
  • Serve on multifunctional teams to define quality, delivery and performance standards. 
  • Perform all duties in compliance with company policies and procedures.

Please send resumes to gsanchez@pdstech.com 
 
Education
  • B.S. degree in engineering or related discipline preferred and/or a combination of eleven to fourteen years of education and relevant experience in lieu of degree. Masters degree in engineering, engineering management, industrial management or business preferred.

Experience and Qualifications

  • A minimum of eight years of engineering experience with a minimum of four years of manufacturing support experience. 
  • Composite fabrication and assembly experience preferred.


  • Requires a thorough knowledge of multiple engineering applications and manufacturing procedures.
  • Possess effective communication skills, both written and verbal.
  • Has expertise in relevant technology and independently applies known principles and practices.

 Physical Demands

  • Frequently required to spend long hours sitting at a work stations and using office equipment. 
  • Frequently required to spend long hours walking and standing on the production floor
  • May be required to walk or stand for brief periods
  • May be required to use stairs when elevator is not available
  • Must occasionally lift, carry, push, pull or otherwise move up to 25 pounds of office supplies and materials 
  • May be required to reach with arms and hands and to stoop, kneel or crouch

Please send resumes to gsanchez@pdstech.com 
 
Job Number: 1710068892
Job Location: Hazelwood, MO
Duration: 12 months
Input Date: 01/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002JsgKAAS&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical System Design & Analysis Engineer 3

Description:
Mechanical System Design & Analysis Engineer 3

Location: Ridley Park, PA
Duration: 12 months

Skill Code: 62D-Hydraulic Sys, Actuation & Cnt

Description:
Supports the development and documentation of mechanical and fluid system and thermal environment requirements to establish the system design. Supports the development, maintenance or modification of system, component and installation designs/proposals to provide design documentation to downstream groups. Performs and documents analyses to validate and verify systems and components meet requirements and specifications. Contributes to supplier development, test and production activities and directs the supplier to optimize integration and achieve program goals. Supports system components'' designs/proposals standards to provide installation and detail documentation. Trains others. Works under general direction. Additionally, Develops, integrates and documents mechanical and fluid system and thermal environment requirements to establish the system design. Develops, maintains, or modifies mechanical and fluid system, component and installation designs, using 3-D Computer Aided Engineering tools and/or other design methods, to provide product definition to other engineering groups, production operations, suppliers and external customers throughout the product lifecycle. Performs, integrates and documents mechanical, fluid and thermal analyses and test results to validate and verify systems and components meet requirements and specifications. Manages supplier development, test and production activities and coordinates with the supplier to optimize the design and achieve program goals. Develops new design/analysis processes and tools to improve effectiveness, quality and efficiency of the development effort. Investigates emerging technologies to develop concepts for future product designs to meet projected requirements.

Education / Experience:
Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Additionally, Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard. Education Requirement is Mandatory.

Degree and typical experience in engineering classification: Bachelor's and 5 or more years' experience, Master's degree with 3 or more years' experience or PhD degree with experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

For client, IF within an Engineer Job Code, Title: engineer, client will require a minimum of a BS in either Mechanical Engineering, Civil Engineering or Aero/Astronautically Engineering or relayed discipline. Job Req may be more specific. (read job req for clarification)

IF INTERESTED THEN PLEASE SHARE UPDATED RESUME AT RAVI@ICONMA.COM
 
Job Number: 17-20052
Job Location: Ridley Park,, PA
Input Date: 12/26/2017
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 1201 PACIFIC AVE STE 600
City, State: TACOMA, WA 98402
Phone: 253/213-2012
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical System Design & Analysis Engineer 3

Description:
Mechanical System Design & Analysis Engineer 3
 
Location: Ridley Park, PA
Duration: 1 year
 
Job Description:        
Supports the development and documentation of mechanical and fluid system and thermal environment requirements to establish the system design. Supports the development, maintenance or modification of system, component and installation designs/proposals to provide design documentation to downstream groups. Performs and documents analyses to validate and verify systems and components meet requirements and specifications. Contributes to supplier development, test and production activities and directs the supplier to optimize integration and achieve program goals. Supports system components'' designs/proposals standards to provide installation and detail documentation. Trains others. Works under general direction. Additionally. Develops, integrates and documents mechanical and fluid system and thermal environment requirements to establish the system design. Develops, maintains, or modifies mechanical and fluid system, component and installation designs, using 3-D Computer Aided Engineering tools and/or other design methods, to provide product definition to other engineering groups, production operations, suppliers and external customers throughout the product lifecycle. Performs, integrates and documents mechanical, fluid and thermal analyses and test results to validate and verify systems and components meet requirements and specifications. Manages supplier development, test and production activities and coordinates with the supplier to optimize the design and achieve program goals. Develops new design/analysis processes and tools to improve effectiveness, quality and efficiency of the development effort. Investigates emerging technologies to develop concepts for future product designs to meet projected requirements. Additionally. Thermal Analysis experience including hand calculation and software required. Thermal Desktop and/or JENA experience preferred.
 
Skill Code:
686-Envir Control & Thermal Analys
 
Education / Experience:         
Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Additionally...Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.
 
Job Description:
Develops, integrates and documents mechanical and fluid system and thermal environment requirements to establish the system design. Develops, maintains, or modifies mechanical and fluid system, component and installation designs, using 3-D Computer Aided Engineering tools and/or other design methods, to provide product definition to other engineering groups, production operations, suppliers and external customers throughout the product lifecycle. Performs, integrates and documents mechanical, fluid and thermal analyses and test results to validate and verify systems and components meet requirements and specifications. Manages supplier development, test and production activities and coordinates with the supplier to optimize the design and achieve program goals. Develops new design/analysis processes and tools to improve effectiveness, quality and efficiency of the development effort. Investigates emerging technologies to develop concepts for future product designs to meet projected requirements.
 
Education/Experience:
Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation
'Thermal Analysis experience including hand calculation and software required. Thermal Desktop and/or JENA experience preferred.” 
Supplier due diligence required - Refer to supplier guidelines concerning education requirements ENG reqs on Supplier sharepoint
 
Education requirements: Client will require a minimum of a BS in either Mechanical Engineering, Civil Engineering or Aero/Astronautically Engineering or related discipline.
 
If interested then please share updated resume at ravi@iconma.com
 
Job Number: 17-20172
Job Location: Ridley Park,, PA
Input Date: 12/26/2017
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 1201 PACIFIC AVE STE 600
City, State: TACOMA, WA 98402
Phone: 253/213-2012
Website: www.iconma.com

Mechanical/HVAC Engineers

Description:
Mechanical/HVAC Engineers- Industrial Background - #1 rated company to work in St. Louis, MO. (Downtown area). 

BSME (PE License preferred) + 7+ years of experience.
• Perform mechanical engineering for industrial HVAC and utility systems on small to large capital projects for our North American pet food manufacturing facilities
• Evaluate feasibility, estimate costs, analysis and designs for existing and new factory sites and buildings on capital projects
• Develop sound construction and purchasing specifications for all aspects of industrial mechanical engineering efforts to support capital projects
•  Work cross-functionally with external consultants to review work, proposed systems, system modifications and equipment installations for code and standards compliance
•  Travel 25-40% to factory locations and construction sites to develop projects, review proposed or completed modifications and/or observe defects
•  Review and approve contractor means and methods for construction at factories in operation
 

 
Job Number: 1710070434
Job Location: Saint Louis, MO
Duration: 6 months
Input Date: 01/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002349gAAA&URLSource=cjhunter

Nuclear Quality Engineer

Description:
Chipton-Ross is seeking Nuclear Quality Engineer for a contract opening in Rancho Bernardo, CA

RESPONSIBILITIES:
The Nuclear Quality Engineer provides expertise in planning, executing and evaluating complicated commercial grade surveys and quality system audits of nuclear suppliers and internal audits of nuclear processes in accordance with 10CFR50 Appendix B. May perform Quality Management System audits in accordance with ISO 9001:2008. Provides expertise and guidance in interpreting quality standards and government regulations. Works on highly complex and diverse problems where analysis of situations or data requires an evaluation of intangible variance factors.

Performs commercial grade surveys, nuclear supplier audits, and internal company nuclear audits for deficiency identification and correction.
Resolves, communicates and tracks non-conformance and corrective action reports.
Leads resolution to complex and diverse problems by providing guidance and direction to quality engineering and technical staff.
Conducts nuclear supplier qualification examinations.
Determines technical objectives for quality assurance and leads approaches to achieving objectives.
May prepare statistical analysis reports, specifications and other technical documents.
Interprets and adapts quality standards and government regulations.
Acts as company contact with suppliers, customers and regulatory personnel to resolve quality issues.
Delivers technical presentations.
Provides project direction and leadership to other staff members.
Responsible for observing all laws, regulations and other applicable obligations wherever and whenever business is conducted on behalf of the Company.
Expected to work in a safe manner in accordance with established operating procedures and practices.

REQUIREMENTS:
Must have a demonstrated professional background with advanced specialist knowledge and expertise in more than one technical area.
Must have authoritative knowledge of concepts, principles and methods in fields of specialization along with superior creative ability and exceptional knowledge of quality principles and practices, manufacturing operations, and industrial and regulatory codes.
Must be able to work independently to develop and implement operational programs. Assignments are self-initiated. Work is reviewed for effectiveness in obtaining long-term objectives. Decisions or recommendations may affect the organization's reputation.
Able to work extended hours and travel as required.

EDUCATION:
Typically requires a bachelor's or master's degree in engineering or related discipline and eight or more years of related experience with a bachelor's degree or six or more years with a master's degree. May substitute equivalent experience in lieu of education.

MISCELLANEOUS:
1st shift, 5/40
 
Job Number: 166377
Job Location: Rancho Bernardo, CA
Rate: $48 to $55.00 DOE
Duration: 6 mo
Input Date: 01/23/2018
Firm Name: CHIPTON ROSS
Attention: Emmanuel Morgan
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: emorgan@chiptonross.com
Website: www.chiptonross.com

Operations Engineer - Level 2

Description:
Location: Lexington, KY
Rate: $20.00 - $25.00/HR
Duration: 6 month contract
Shift: 1st Shift
Overtime: Exempt

**MUST have an Active Secret Clearance or have had one within the last 2 years**

Description
**MUST have an Active Secret Clearance or have had one within the last 2 years**
Performs activities involving the producibility and quality of the product, and the processes that directly pertain, encompassing primarily one or more of the following engineering disciplines: failure analysis, industrial, manufacturing, manufacturing equipment, process, product, quality assurance, reliability, supplier quality, Lean Six Sigma, test, and tool.

Industrial Engineering Responsibilities to include, but not limited to:
* Process Improvements
* Times Studies
* Enterprise Savings Development and Submission
* Facility and Work Station Layouts
* Standard Hours Analysis
* Production Performance Reporting
* Manpower / Equipment Analysis

Skill/Experience/Education
Mandatory:
**MUST have an Active Secret Clearance or have had one within the last 2 years**
Experience with process improvement, conducting time studies, creating facility and workstation layouts. Capable of generated standard hours and manpower / equipment analysis.

Desired:
Industrial Engineering degree Green Belt training and/or certification Experience with 6S
 
Job Number: 8354
Job Location: Lexington, KY
Rate: $20.00 - $25.00/HR
Per Diem: Split Possible
Overtime: Exempt
Duration: 6 mos
Input Date: 01/17/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Principal Structural Engineer -

Description:
Principal Structural Engineer

PE Required in state of CA

Local Candidates Only - No Relo


Ready to put your engineering expertise designing key oil and gas design projects- Do you enjoy being involved on a wide variety of engineering tasks on multiple, complex structural projects.

Company extensive experience in this field, combined with your advanced engineering knowledge, will move your career forward with opportunity to lead teams. We need our engineers to be versatile, enthusiastic to work in highly flexible, team-oriented environment and who have exceptional communication, analytical and leadership skills.

In this role you will design a variety of structures by applying advanced construction/engineering techniques and analysis. You will inspect site conditions to ensure suitability for the designed permanent works.


Give advice on constructed matters. Observe site safety procedures. You may be asked to inspect construction, including temporary works to ensure compliance with approved methods and contract requirements. Maintain records of inspections, work executed, etc.

RESPONSIBILITIES:

Working on construction site, assists Resident Engineer with implementing structural engineering practices and related standards.
Structural engineering systems subject matter expert
Develops and implements QA procedures to ensure quality control performed by others is properly implemented throughout the program and assigned projects.
Reviews standards for materials and equipment to ensure they are in accordance with the specifications and LEED sustainability plan.
Performs constructability, buildability, and maintainability reviews, especially as related to structural systems.
Reviews shop drawing and construction-phase submittals when issues arise that require specific technical assistance.
Provides input regarding all energy efficiency and performance standards.
Reviews design drawings and specifications at periodic check points as required by the PMP milestones.
Participates in value engineering and scope and budget reconciliation when required or requested.
Writes detailed reports related to structural engineering of projects and confers with project and program managers as requested.
Supports the needs of other discipline leads for input to their efforts.
Makes site trips to collect structural engineering related data and construction contractor performance.
Qualifications - External Qualifications:

10 to 12 years of structural engineering design experience with concrete and steel design experience in heavy industrial and oil/gas required
Bachelors degree in Civil engineering, with structural concentration
Professional Engineer registration REQUIRED
Proficiency in utilizing CAD and PC software engineering packages
Must meet customer security requirements and complete a background check by federal authorities
 
Job Number: 361461
Job Location: Bakersfield, CA
Rate: $62hr
Per Diem: no
Duration: temp to hire
Start Date: asap
Input Date: 01/08/2018
Firm Name: JOHNSON SERVICE GROUP
Attention: Rich Martinsen
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

Procurement Agent 3 - WA

Description:
Chipton-Ross is seeking a Procurement Agent 3 for an opening in Bingen/Vancouver, WA.

RESPONSIBILITIES:
Conducts risk, issues and opportunities evaluation to assess supplier quality, financial stability and performance for complex supplier transactions to include standard/non standard materials and services. Integrates program/customer requirements into source selection, negotiation and contracting strategies. Develops requests for quotes and sources equipment, materials and services. Compiles information on price trends. Reviews proposals and selects or recommends suppliers. Evaluates terms and conditions and flow down clauses to determine compliance. Prepares supplier contracts and required documents. Negotiates pricing and contract terms and conditions. Prepares and executes negotiated contractual documents and other binding agreements. Monitors supplier/subcontractor schedule, quality, delivery and financial performance. Mitigates risks and initiates supplier improvement actions. Follows up on orders placed, verifies delivery, and maintains documentation.
Complete understanding and application of principles, concepts, practices, and standards. Full knowledge of industry practices.
Develops solutions to a variety of complex problems. May refer to established precedents and policies.
Work is performed under general direction. Participates in determining objectives of assignment. Plans schedules and arranges own activities in accomplishing objectives. Work is reviewed upon completion for adequacy in meeting objectives.
Exerts some influence on the overall objectives and long-range goals of the organization. Erroneous decisions or failure to achieve objectives would normally have a serious effect upon the administration of the organization.
Represents organization as a prime contact on contracts or projects. Interacts with senior internal and external personnel on significant matters often requiring coordination between organizations.

ADDITIONAL EXPERIENCE:
Ability to collect, organize, and analyze data; summarize findings; develop conclusions and recommendations from appropriate data sources.
Develops and uses collaborative relationships to facilitate the accomplishment of work goals.
Understands and utilizes economic, financial, and industrial data to accurately diagnose business strengths and weaknesses, identifying key issues, and developing strategies and plans.
Clearly conveys information and ideas through a variety of media to individuals or groups in a manner that engages the audience and helps them understand and retain the message.
Effectively explores alternatives and positions to reach outcomes that gain the support and acceptance of all parties.
Knowledge of the procurement process used at company sites in order to track procurement obligations such as, schedule compliance, quantity and past performance. Overall knowledge of processes used in procurement activities such as supplier selection, identification of requirements bid list development, supplier/subtler management and supplier recommendations for goods and services.
Knowledge of government/company, procedures and regulations (e.g., estimating system manual, FAR, DFAR, TINA, ITAR, Procurement integrity, Export Compliance) relating to the development of cost proposals. Knowledge of proposal, accounting, and rate development (common systems). Knowledge of audit, fact-finding, and negotiation processes (e.g., self audit, internal audit, government audit, effective negotiation) and how they affect the proposal process.
Knowledge of strategic sourcing objectives including supply base optimization, enterprise leveraging, supplier performance improvement and business considerations to develop the company's supplier base.
Knowledge of supplier assessment processes including Preferred Supplier Certification and Work Transfer Process. Elements of assessment to include supplier's past performance, business processes, capacity plan, statement of work evaluation, risk mitigation plan, capabilities and lean practices in order to rate supplier viability to support the company companies goals and objectives. Ability to control and deliver project deliverables, project accounting and appraisal, and optimize the contribution of the people involved using project management tools.
Apply knowledge of suppliers' abilities (e.g., production, technical, service, design), management (e.g., organization structure, processes, risks, capacity, past performance), and products used in procurement activities (e.g., supplier selection, bid list development, supplier management).

NOTE: Selected candidate will split time between Bingen, WA and Vancouver, WA.

EDUCATION:
6-9 years with Accredited Bachelor's degree or 4-7 years with Accredited Master's degree.

WORK HOURS: FULL TIME/9-80 WORK WEEK

 
Job Number: 165776
Job Location: Bingen/Vancouver, WA
Rate: $22 to $28.00 DOE
Duration: 6 Months
Input Date: 01/23/2018
Firm Name: CHIPTON ROSS
Attention: Patricia Padilla
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: ppadilla@chiptonross.com
Website: www.chiptonross.com

Procurement Agent 3 Contractor - WA

Description:
Chipton-Ross is seeking a Procurement Agent 3 Contractor located in Vancouver, WA.

RESPONSIBILITIES:
Conducts risk, issues and opportunities evaluation to assess supplier quality, financial stability and performance for complex supplier transactions to include standard/non standard materials and services. Integrates program/customer requirements into source selection, negotiation and contracting strategies. Develops requests for quotes and sources equipment, materials and services. Compiles information on price trends. Reviews proposals and selects or recommends suppliers. Evaluates terms and conditions and flow down clauses to determine compliance. Prepares supplier contracts and required documents. Negotiates pricing and contract terms and conditions. Prepares and executes negotiated contractual documents and other binding agreements. Monitors supplier/subcontractor schedule, quality, delivery and financial performance. Mitigates risks and initiates supplier improvement actions. Follows up on orders placed, verifies delivery, and maintains documentation.
oComplete understanding and application of principles, concepts, practices, and standards. Full knowledge of industry practices.
oDevelops solutions to a variety of complex problems. May refer to established precedents and policies.
oWork is performed under general direction. Participates in determining objectives of assignment. Plans schedules and arranges own activities in accomplishing objectives. Work is reviewed upon completion for adequacy in meeting objectives.
oExerts some influence on the overall objectives and long-range goals of the organization. Erroneous decisions or failure to achieve objectives would normally have a serious effect upon the administration of the organization.
oRepresents organization as a prime contact on contracts or projects. Interacts with senior internal and external personnel on significant matters often requiring coordination between organizations.

REQUIRED EXPERIENCE:
KEY SKILLS & ABILITIES
oAbility to collect, organize, and analyze data; summarize findings; develop conclusions and recommendations from appropriate data sources.
oDevelops and uses collaborative relationships to facilitate the accomplishment of work goals.
oUnderstands and utilizes economic, financial, and industrial data to accurately diagnose business strengths and weaknesses, identifying key issues, and developing strategies and plans.
oClearly conveys information and ideas through a variety of media to individuals or groups in a manner that engages the audience and helps them understand and retain the message.
oEffectively explores alternatives and positions to reach outcomes that gain the support and acceptance of all parties.
oKnowledge of the procurement process used at company sites in order to track procurement obligations such as, schedule compliance, quantity and past performance. Overall knowledge of processes used in procurement activities such as supplier selection, identification of requirements bid list development, supplier/subtler management and supplier recommendations for goods and services.
oKnowledge of government/company, procedures and regulations (e.g., estimating system manual, FAR, DFAR, TINA, ITAR, Procurement integrity, Export Compliance) relating to the development of cost proposals. Knowledge of proposal, accounting, and rate development (common systems). Knowledge of audit, fact-finding, and negotiation processes (e.g., self audit, internal audit, government audit, effective negotiation) and how they affect the proposal process.
oKnowledge of strategic sourcing objectives including supply base optimization, enterprise leveraging, supplier performance improvement and business considerations to develop the company's supplier base.
oKnowledge of supplier assessment processes including Preferred Supplier Certification and Work Transfer Process. Elements of assessment to include supplier's past performance, business processes, capacity plan, statement of work evaluation, risk mitigation plan, capabilities and lean practices in order to rate supplier viability to support the company companies goals and objectives. Ability to control and deliver project deliverables, project accounting and appraisal, and optimize the contribution of the people involved using project management tools.
oApply knowledge of suppliers' abilities (e.g., production, technical, service, design), management (e.g., organization structure, processes, risks, capacity, past performance), and products used in procurement activities (e.g., supplier selection, bid list development, supplier management).

EDUCATION:
6-9 years with Bachelor's degree or 4-7 years with Master's degree

Experience with software and service commodities

WORK HOURS:
Full-Time
9/80 work week

 
Job Number: 165775
Job Location: Vancouver, WA
Rate: $22 to $28.00 DOE
Duration: 6 MONTHS
Input Date: 01/23/2018
Firm Name: CHIPTON ROSS
Attention: Patricia Padilla
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: ppadilla@chiptonross.com
Website: www.chiptonross.com

Production Controller - 1

Description:
PDS Tech, Inc. is seeking a Production Controller in San Diego, CA.  

Position Summary/Responsibilities:

  • Maintains schedules for material requirements and availability for the manufacture of industrial and commercial products to support production control.
  • Compiles records concerning quantity, cost, and type of material received, shipped, in stock or inventory, and/or in production.
  • Expedites flow of materials, parts, and assemblies within or between departments in accordance with production and shipping schedules.
  • Assists in determining possible and actual shortages may initiate action to correct these deficiencies.
  • Uses knowledge of production, procurement, and engineering departments to alert proper authorities regarding potential problems and appropriate remedial action.
  • Estimates and logs production rate and time expenditures and may be required to establish sequence and lead time of each operation to meet shipping dates.

Leveling Factors:
Knowledge

Little or no knowledge of the job. Moderate understanding of general job aspects and some understanding of the detailed aspects of the job.

Supervision Given and Received

Immediate Close supervision involving detailed verbal and written instructions. Frequent review of work performance.

Typical Duties and Tasks

Duties & tasks are simple and repetitive. Assists more senior staff members with routine tasks. Refers questions and problems to higher levels.

Consequence of Errors

Errors can be easily and quickly detected within the immediate work unit and would result only in minor disruption or expense to correct.

Contacts

Contacts are primarily within immediate work unit. Contacts involve obtaining or providing information requiring little explanation or interpretation.

 
 
  • High School diploma or equivalent 
  • Ability to obtain a DOD Secret Clearance

 
Job Number: 1710072660
Job Location: San Diego, CA
Duration: 12 months
Input Date: 01/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Jordan
Address: 12720 GATEWAY DR S STE 102
City, State: TUKWILA, WA 98168-3333
Phone: 206/763-2840
800 Phone: 800/678-8644
Fax Phone: 206/763-3283
Email: cecjseattle@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023CI7AAM&URLSource=cjhunter

Production Controller - 1- Secret Clearance

Description:
PDS Tech, Inc. is seeking a candidate for the Production Controller - 1- Secret Clearance position located in San Diego, CA. 

Position Summary / Responsibilities

Maintains schedules for material requirements and availability for the manufacture of industrial and commercial products to support production control. Compiles records concerning quantity, cost, and type of material received, shipped, in stock or inventory, and/or in production. Expedites flow of materials, parts, and assemblies within or between departments in accordance with production and shipping schedules. Assists in determining possible and actual shortages may initiate action to correct these deficiencies. Uses knowledge of production, procurement, and engineering departments to alert proper authorities regarding potential problems and appropriate remedial action. Estimates and logs production rate and time expenditures and may be required to establish sequence and lead time of each operation to meet shipping dates.

Leveling Factors:
Knowledge
Little or no knowledge of the job. Moderate understanding of general job aspects and some understanding of the detailed aspects of the job.
Supervision Given and Received
Immediate Close supervision involving detailed verbal and written instructions. Frequent review of work performance.
Typical Duties and Tasks
Duties & tasks are simple and repetitive. Assists more senior staff members with routine tasks. Refers questions and problems to higher levels.
Consequence of Errors
Errors can be easily and quickly detected within the immediate work unit and would result only in minor disruption or expense to correct.
Contacts
Contacts are primarily within immediate work unit. Contacts involve obtaining or providing information requiring little explanation or interpretation.
 
Qualifications:
Basic Qualifications:

Preferred Qualifications:
Typical Education / Experience
For all non-exempt level 1 and college intern positions: High School diploma or equivalent and 0 years experience. For all High School intern positions: Must be enrolled in a high school program in pursuit of a high school diploma or equivalent and 0 years experience.
 
 
Job Number: 1710070664
Job Location: San Diego, CA
Duration: 12 months
Input Date: 01/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: DJ Englert
Address: 3130 S HARBOR BLVD STE 100
City, State: SANTA ANA, CA 92704
Phone: 714/540-7900
800 Phone: 800/234-8644
Fax Phone: 714/540-8092
Email: cecjcostamesa@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i5000000235BuAAI&URLSource=cjhunter

Production Coordinator A

Description:
PDS Tech is seeking a Production Coordinator for an open position in Jacksonville, FL.
In your role you will:

  • Assist with processing and movement of production and other materials into and out of storage, production and other locations to support the flow of production following standard work instructions.
  • Assist in monitoring work in process.
  • Post updates to automated systems to insure parts availability.
  • Identify problems or discrepancies with parts and materials.
  • Assist within the work group to expedite and complete production activities to avoid schedule delays.
  • May be working in variable work conditions and may need to operate industrial trucks and/or forklifts.
  • Work under minimum supervision and with other support and operations personnel.

As our ideal candidate, you will meet the following requirements:
  • High school diploma or GED.
  • Must be Safety minded, customer service support oriented and able to communicate well both written and verbally.
  • Computer skills desired.
  • Must be detailed oriented, efficient and able to work in a face paced environment.
  • Interim level security clearance required.
  • Must be a U.S. citizen.

 
Job Number: 1710076943
Job Location: Jacksonville, FL
Duration: 12 months
Input Date: 01/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Patrick Mahoney
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023ObYAAU&URLSource=cjhunter

Project/Change Management

Description:
Change/Project Management - #1 rated company to work in St. Louis, MO. (Downtown area). 
Must have experience with the following:

Risk Analysis /Manufacturing Processes/Business Analyst

**Prefer Industrial Engineering Degree 
  • Experience and knowledge of change management principles and methodologies
  • Familiarity with project management approaches, tools and phases of the project lifecycle
  • Familiarity of manufacturing processes
  • Up to 60% travel required
  • The position will play a key role in helping capital projects meet business, schedule and budget objectives.  This position will focus on the operational, non-construction elements of a project, including methods, materials, man and machine.


 
Job Number: 1710069120
Job Location: Saint Louis, MO
Duration: 12 months
Input Date: 01/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002K1QQAA0&URLSource=cjhunter

SECRET Product Repair/Mod Tech C

Description:
PDS Tech is seeking a Product Repair/Mod Technician for an open position in Ridley Park, PA
 
Assembles, disassembles and/or modifies systems by changing, removing, replacing or upgrading aerospace vehicle components to correct failures or implement changes. Oversees assembly, disassembly or overhaul. Configures aerospace vehicles and bench test equipment. Troubleshoots complex pneumatic, hydraulic and electrical systems to isolate mechanical or electrical faults and repair faulty components. Performs validation/verification testing of systems and components. Documents procedures and established processes to ensure contractual and regulatory compliance (e.g., repairs, test results, applicable modifications and inspection results). Inspects components and verifies repairs for flight worthiness requirements. Oversees training. Works under general direction.
 
•             Possess a minimum of 7 years of direct aviation experience
•             Possess a minimum of 4 years of direct practical experience (trade specific)
•             Possess a minimum of 5 years of direct CH-47 aircraft type experience, or for, Airframe Structures Maintenance Technician, 5 years of appropriate helicopter airframe experience to include the CH-47 aircraft type
•             Possess an FAA Airframe/Powerplant (A&P) mechanics license, Transport Canada Civil Aviation (TCCA) Aircraft Maintenance Engineer (AME) license or Military equivalent
 
 
Job Number: 1710069133
Job Location: Ridley Park, PA
Duration: 6 months
Input Date: 01/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Patrick Mahoney
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002K1U8AAK&URLSource=cjhunter

Software Engineer - Avionics

Description:
PDS Tech, Inc. is seeking Senior level Software Engineers for our Client, a premier supplier of avionics, electronics, and communications systems.
 
This role is focused on the development of avionics software for the US DoD rotary-wing and/or fixed wing market.
 
 In this role you will:
  • Be part of a multifunctional team comprised of systems engineers and software engineers.
  • Develop in a collaborative team environment which often includes team members from diverse geographic and cultural backgrounds.
  • The tasks may include: requirements analysis and capture, system/sub-system design, software requirements definition, software/hardware integration, test case/procedure development using Python, performing/running test procedures for test events, and software implementation using ADA or model based development tools such as MATLAB/Simulink.

Our global development team is split between the USA and other countries, requiring odd hours on occasion.
Customers are both foreign and domestic and include all branches of the armed services as well as civilian entities.
  • 4 year degree in an applicable STEM field
  • Software development experience using C, C++, or C#
  • Proficient in an assembly language
  • Experience with MATLAB/Simulink, Python, ADA, and C/C++ is a plus.
  • Ability to train and mentor entry level engineers
  • Strong verbal and written communication skills
  • Strong critical thinking and problem solving skills.
  • Ability to obtain a Security Clearance. US Citizenship is required.
     

 
Job Number: 1610053780
Job Location: Cedar Rapids, IA
Per Diem: No
Duration: 6 months
Input Date: 01/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Jason Andrzejewski
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002CBGDAA4&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer with active secret UT

Description:
159707
Requirement# AERO-REQ-0495
Work location Odgen, UT
Work Week 9/80
Priority High
Needed Date 04/10/2017
End Date 04/27/2018
Number of Resources 1
Security Clearance Secret
52-60/hr DOE


Title: Software Engineer

Description
Applicant will be the software architect responsible for embedded software definition, design, development and integration to support real-time embedded avionics software projects. The applicant will be responsible for designing, coding, testing and integrating Vehicle Management Systems software.


Mandatory:

Engineering knowledge of C++ application programming, basic wire testing methods, wiring diagram familiarity, Technical Order usage, and process/methodology adherence; Interface with customer personnel is required. Also performs technical planning, research, system integration, verification and validation, documentation, and fielding of program update candidates.
Desired:

Provide engineering expertise to support the development and updates to a piece of Air Force support Equipment. The Multiplex Bus Fault Isolator (MBFI) is support equipment which provides capabilities to trouble shoot and detect faults within the multiplex busses of aircraft. A thorough knowledge of aircraft Multiplex bus communication and 1553/194 standards ; Must work well in Integrated Product Team (IPT) comprised of contract labor, Lockheed Martin, and government civil servants

Skill Matrix
Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory(Yes/No)

Borland C Builder and C++ Programming Software Coding Languag 0-3 Years
Microsoft Access Programming Programming 0-3 Years
Math and Logic Skills Skills 0-3 Years
Technical Writing Technical Writing 0-3 Years



Interview Required Yes
Shift 1st Shift
Max Bill Rate OT Allowed No
Travel No
Non-Exempt

Rates
0-4 Yrs Pay Rate: 52.00 USD
5-8 Yrs Pay Rate: 56.00 USD
9+ Yrs Pay Rate: 60.00 USD
 
Job Number: JE-0495
Job Location: Ogden, UT
Rate: 52-60/hr max
Duration: 12 month contract
Input Date: 01/03/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Engineer - Cabin & Cargo

Description:
Bachelor's Degree (B.S) in Mechanical, Aerospace, or Civil Engineering
Minimum of 5 years in cabin or cargo compartment stress analysis.
Experience in static (FE and free-body), fatigue and transient analysis, Nastran, Patran, MathCad.
Familiar with FAA/EASA Aircraft regulatory requirements.
Able to utilize Microsoft Excel, Word, PowerPoint and Project PC tools
Primary Responsibilities: Plan, organize and prioritize work contents based on project deliverables.
Perform detailed stress analysis of aircraft cabin or cargo components, by classical hand analysis as well as Finite Element methods, to support the structural design efforts of new and modified components from the conceptual phase to development and certification.
Generate stress substantiation reports.
Develop or review structural qualification plans in accordance with company standards and regulatory requirements.
Review and approve vendor drawings, stress reports, and test reports when delegated.
 
Job Number: 683717
Job Location: Mobile, AL
Rate: 62.00-68.00
Per Diem: yes
Overtime: yes
Duration: LT
Start Date: ASAP
Input Date: 12/05/2017
Firm Name: HI-TEC PROFESSIONAL SOLUTIONS INC
Attention: Anne Cameron
Address: 2501 E PIEDMONT RD STE 103
City, State: MARIETTA, GA 30062-7753
Phone: 770/575-5855
Fax Phone: 770/575-5856
Website: www.hi-tecsolutions.com

Structural Analysis Engineer - Composites

Description:
Location: Sacramento, CA
Rate: $70.00 - $75.00/HR
Duration: 1 year contract
9/80 Schedule
OT Possible

** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

** Candidates must have hands-on structural analysis experience using various composite material systems and/or solid rocket motor grain experience **

Duties:
-Must have recent experience using ANSYS (or Workbench) on Structural Analysis specifically (not fluid analysis). Knowledge of other finite element software such as ABAQUS is beneficial.
-Aerospace or Defense related experience preferred over airframe or aviation experience.
-Experience analyzing composites including classical lamination theory and within ANSYS environment. Experience with filament wound composites is a plus.
-Experience with solid propellants or other viscoelastic materials.
-Recent college grads are okay with at least some ANSYS experience.
-Prefer candidates with stable work histories (are not “job hoppers” and do not have big resume gaps).
-Master’s degree strongly preferred.

The selected candidate will:
•Assist other analysts and designers engaged with development and production of new and existing solid rocket motors, propulsion system components and secondary structure.
•Perform structural analyses utilizing class hand-calculation methods and finite element models.
•Construct and solve static and dynamic finite element models with ANSYS
•Participate in test planning and execution.
•Correlate structural models to test results.
•Interpret analytical results, assess design margins and prepare technical reports.

Skills:
-Demonstrated experience performing linear, non-linear and structural analyses supporting design, development and production qualification of new or updated products is required.
-Proficiency using finite element analysis tools such as ANSYS is required.
-Proficiency using CAD tools including NX strongly desired.
-Knowledge and experience with aerospace product development efforts is desired.
-Must have the ability to read and interpret engineering drawings.
-Proficiency in Microsoft Office products (Word, Excel and Power Point) is required.

Education:
-BS in Mechanical, Aerospace, Civil Engineering or Engineering Mechanics and at least 5 years of engineering experience with structural analysis or an equivalent combination of education and experience.
-Master’s degree is strongly preferred.
 
Job Number: 8359
Job Location: Sacramento, CA
Rate: $70.00 - $75.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 01/17/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

Structural Analysis Engineer - Composites

Description:
**Candidates must be U.S. Citizens - Dual citizens are NOT eligible for this role.**

-Must have recent experience using ANSYS on Structural Analysis specifically (not fluid analysis). Knowledge of other finite element software such as ABAQUS is beneficial.
-Aerospace or Defense related experience preferred over airframe or aviation experience.
-Experience analyzing composites including classical lamination theory and within ANSYS environment. Experience with filament wound composites is a plus.
-Experience with solid propellants or other viscoelastic materials.
-Recent college grads are okay with at least some ANSYS experience.
-Prefer candidates with stable work histories (are not “job hoppers” and do not have big resume gaps).
-Master's degree strongly preferred.

The selected candidate will:
Assist other analysts and designers engaged with development and production of new and existing solid rocket motors, propulsion system components and secondary structure.
Perform structural analyses utilizing class hand-calculation methods and finite element models.
Construct and solve static and dynamic finite element models with ANSYS
Participate in test planning and execution.
Correlate structural models to test results.
Interpret analytical results, assess design margins and prepare technical reports.
Required Skills:
ANSYS
Aerospace Structural Analysis/Stress

Skills:
-Demonstrated experience performing linear, non-linear and structural analyses supporting design, development and production qualification of new or updated products is required.
-Proficiency using finite element analysis tools such as ANSYS is required.
-Proficiency using CAD tools including NX strongly desired.
-Knowledge and experience with aerospace product development efforts is desired.
-Must have the ability to read and interpret engineering drawings.
-Proficiency in Microsoft Office products (Word, Excel and Power Point) is required.

Education: -BS in Mechanical, Aerospace, Civil Engineering or Engineering Mechanics and at least 5 years of engineering experience with structural analysis or an equivalent combination of education and experience.
-Master's degree is strongly preferred.
 
Job Number: 373017
Job Location: Sacramento, CA
Rate: TBD
Duration: 12 - months
Start Date: ASAP
Input Date: 01/23/2018
Firm Name: CTS INTERNATIONAL
Address: 11100 NE 8TH ST STE 800
City, State: BELLEVUE, WA 98004
Phone: 425/646-2688
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com

Structural Analysis Engineer - Composites ** Candidates must have hands-on structural analysis experience using various composite material systems and/or solid rocket motor grain experience ** CA

Description:
160837/7630372
Job Title: Structural Analysis Engineer - Composites
Sacramento CA
75/hr max
12 months
** Candidates must have hands-on structural analysis experience using various composite material systems and/or solid rocket motor grain experience **


Duties: ** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

-Must have recent experience using ANSYS (or Workbench) on Structural Analysis specifically (not fluid analysis). Knowledge of other finite element software such as ABAQUS is beneficial.

-Aerospace or Defense related experience preferred over airframe or aviation experience.

-Experience analyzing composites including classical lamination theory and within ANSYS environment. Experience with filament wound composites is a plus.

-Experience with solid propellants or other viscoelastic materials.

-Recent college grads are okay with at least some ANSYS experience.

-Prefer candidates with stable work histories (are not “job hoppers” and do not have big resume gaps).

-Master's degree strongly preferred.

The selected candidate will:

•Assist other analysts and designers engaged with development and production of new and existing solid rocket motors, propulsion system components and secondary structure.
•Perform structural analyses utilizing class hand-calculation methods and finite element models.
•Construct and solve static and dynamic finite element models with ANSYS •Participate in test planning and execution.
•Correlate structural models to test results.
•Interpret analytical results, assess design margins and prepare technical reports.
Skills: -Demonstrated experience performing linear, non-linear and structural analyses supporting design, development and production qualification of new or updated products is required.
-Proficiency using finite element analysis tools such as ANSYS is required.
-Proficiency using CAD tools including NX strongly desired.
-Knowledge and experience with aerospace product development efforts is desired.
-Must have the ability to read and interpret engineering drawings.
-Proficiency in Microsoft Office products (Word, Excel and Power Point) is required.
Keywords:
Education: -BS in Mechanical, Aerospace, Civil Engineering or Engineering Mechanics and at least 5 years of engineering experience with structural analysis or an equivalent combination of education and experience.
-Master's degree is strongly preferred.

Skills and Experience:
Required Skills:
AEROSPACE STRUCTURAL ANALYSIS
ANSYS
AEROSPACE

# of Positions: 3

Location:
Sacramento, CA
Hwy 50 and Aerojet Rd., 95670

Schedule:
Start Date: 01/02/2018
Estimated End Date: 12/21/2018
Hours Per Week: 40.00
Hours Per Day: 8.00

Schedule Notes: 9/80 Schedule. OT possible.
 
Job Number: MB-7630372
Job Location: Sacramento, CA
Rate: 75/hr max
Duration: 12 month contract
Input Date: 01/23/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analyst - Composites (Active Secret Clearance REQUIRED)

Description:
Job Title: Sr. Composite Structure Analysis Engineer
Location: Clearfield UT
Clearance: YES, must have last investigation completed within the past 4 years and 6 months
Job Type: Contract
Duration: 1 Year, could be extended
Schedule: 9/80

Role description & Responsibilities: 
• Highly motivated structural analysis engineer with composite structures and assemblies for military and/or commercial aircraft.
• The candidate should also have experience with the characterization of composite materials with ASTM standard tests.
• Responsibilities will include but are not limited to the analysis of laminates, sandwich structures, bonded and bolted assemblies, and leading composite material characterization activities including: authoring test plans and test reports, data reduction and calculation of material allowables. 

Experience Requirements: 
• MUST HAVE AN ACTIVE SECURITY CLEARANCE TO BE CONSIDERED FOR THIS ROLE
• Must have an active clearance with an investigation within the last 4.5 years (or 4 years 6 months)
• BS in Civil, Mechanical, or Aerospace Engineering or related with a minimum of 10 years related experience in design engineering function 
• Minimum of 4 years of experience with Abaqus and/or Nastran. (5-15 years, Nastran-NX preferred) 
• Static structural and structural/thermal analysis 
• Buckling, stability, and modal analysis 
• Loads definition 
• Material characterization testing 
• Knowledge of composite materials and manufacturing processes 
• Oral and written communication skills 
• Ability to work in a fast paced dynamic environment as part of a multi-discipline team 

Experience Preferred: 
• Proficiency with NX, Catia V5, Fibersim, MSC Marc, Altair Hyperworks/Optistruct, and Hypersizer are also desirable 
• Definition of layups and ply patterns with Fibersim to generate finite element models 
• Script writing, workflow automation 
• Constitutive Model Development and implementation 
• Requirements definition and verification 
• Previous experience in aerospace manufacturing facility 
 
Job Number: O6742971
Job Location: Clearfield, UT
Rate: Open
Per Diem: Split
Overtime: Some
Duration: 12 months
Start Date: ASAP
Input Date: 11/29/2017
Firm Name: NESC STAFFING
Attention: Brad McInnis
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
Phone: 603/431-9740
800 Phone: 800/562-3463
Fax Phone: 800/637-2562
Website: www.nesc.com

Structural Design Engineer

Description:
PDS Tech is seeking a Structural Design Engineer in St. Louis, MO


Provide engineering data, instructions, documents (drawings, reports, etc.) and technical support required for fabrication and installation of aircraft structural components.  Must be able to perform the research required for completion of task assignments (with minimal guidance from the Lead engineers). 
  • Develop design data for aircraft structural components, systems components, assemblies and installations.
  • Complete assignments within scheduled milestones.
  • Provide technical assistance to fabrication shops, production, quality assurance and other departments in interpretation and implementation of design data.
  • Mentor associate structural engineers.
  • Actively works to improve daily processes.
  • Maintains a current knowledge of developments in aircraft structures.
  • Participates in projects to improve productivity and financial performance.
  • Perform other job duties as assigned.


 
 

Qualifications: 

  • Bachelors Degree in Aerospace, Aeronautical, Civil, Mechanical or Manufacturing Engineering or equivalent training and experience. 
  • Minimum 8 years engineering experience.
  • Proficient in NX Unigraphics or other similar 3D solid modeling software (such as: CATIA V5 or AutoCAD 2000). 
  • Experience with Team Center & Enovia is a plus. 
  • Attention to detail of completed designs is critical.  Ability to work with cross functional teams required.
  • Proficient at producing high quality designs within schedule and budget.
  • Must be able to work in team environment.
  • Must be able to work overtime and weekends as required.

Required: 

  • Must have active secret clearance or active within the last 2 years
  • Composite experience 

PDS Tech is a premier supplier of highly skilled technical personnel to the aerospace and defense industries.  These are long term assignments in the St. Louis, MO area. Client is accepting resumes now for review.  Please connect with us now for immediate consideration.  Apply to this posting, or contact Mary Ann McCarthy at 800-472-3737 X27244 or mmccarthy@pdstech.com for more information.
 
Job Number: 1610051299
Job Location: Hazelwood, MO
Duration: 12 months
Input Date: 01/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000001ydebAAA&URLSource=cjhunter

Structural Design Engineer

Description:
PDS Tech is seeking Structural Design Engineers for openings in the St. Louis, MO area and other locations across the US.
 Locations vary. Please contact a recruiter to determine currently open and upcoming locations.  

An active Secret Clearance is required.  Flexible and part-time schedules will be considered.

Provide engineering data, instructions, documents (drawings, reports, etc.) and technical support required for fabrication and installation of aircraft structural components.  Must be able to perform the research required for completion of task assignments (with minimal guidance from the Lead engineers). 
  • Develop design data for aircraft structural components, systems components, assemblies and installations.
  • Complete assignments within scheduled milestones.
  • Provide technical assistance to fabrication shops, production, quality assurance and other departments in interpretation and implementation of design data.
  • Mentor associate structural engineers.
  • Actively works to improve daily processes.
  • Maintains a current knowledge of developments in aircraft structures.
  • Participates in projects to improve productivity and financial performance.
  • Perform other job duties as assigned.


 
 

Qualifications: 
  • Bachelors Degree in Aerospace, Aeronautical, Civil, Mechanical or Manufacturing Engineering or equivalent training and experience. 
  • Minimum 8 years engineering experience.
  • Proficient in NX Unigraphics or other similar 3D solid modeling software (such as: CATIA V5 or AutoCAD 2000). 
  • Experience with Team Center & Enovia is a plus. 
  • Attention to detail of completed designs is critical.  Ability to work with cross functional teams required.
  • Proficient at producing high quality designs within schedule and budget.
  • Must be able to work in team environment.
  • Must be able to work overtime and weekends as required.

Required: 

  • An active Secret Clearance is required.  
  • Composite experience 

 
Job Number: 1610051186
Job Location: CO Springs, CO
Duration: 12 months
Input Date: 01/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000001ydLpAAI&URLSource=cjhunter

Structural Design Engineer

Description:
PDS Tech is seeking Structural Design Engineers for openings in the St. Louis, MO area and other locations across the US. 
Locations vary. Please contact a recruiter to determine currently open and upcoming locations.  
An active Secret Clearance is required.  Flexible and part-time schedules will be considered.


Provide engineering data, instructions, documents (drawings, reports, etc.) and technical support required for fabrication and installation of aircraft structural components.  Must be able to perform the research required for completion of task assignments (with minimal guidance from the Lead engineers). 
  • Develop design data for aircraft structural components, systems components, assemblies and installations.
  • Complete assignments within scheduled milestones.
  • Provide technical assistance to fabrication shops, production, quality assurance and other departments in interpretation and implementation of design data.
  • Mentor associate structural engineers.
  • Actively works to improve daily processes.
  • Maintains a current knowledge of developments in aircraft structures.
  • Participates in projects to improve productivity and financial performance.
  • Perform other job duties as assigned.


 
 

Qualifications: 
  • Bachelors Degree in Aerospace, Aeronautical, Civil, Mechanical or Manufacturing Engineering or equivalent training and experience. 
  • Minimum 8 years engineering experience.
  • Proficient in NX Unigraphics or other similar 3D solid modeling software (such as: CATIA V5 or AutoCAD 2000). 
  • Experience with Team Center & Enovia is a plus. 
  • Attention to detail of completed designs is critical.  Ability to work with cross functional teams required.
  • Proficient at producing high quality designs within schedule and budget.
  • Must be able to work in team environment.
  • Must be able to work overtime and weekends as required.

Required: 

  • An active Secret Clearance is required. 
  • Composite experience 

 
Job Number: 1610051183
Job Location: Palmdale, CA
Duration: 12 months
Input Date: 01/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000001ydLaAAI&URLSource=cjhunter

Structural Design Engineer

Description:
PDS Tech is seeking Structural Design Engineers for openings in the St. Louis, MO area and other locations across the US. 
Locations vary. Please contact a recruiter to determine currently open and upcoming locations.  
An active Secret Clearance is required.  Flexible and part-time schedules will be considered.


Provide engineering data, instructions, documents (drawings, reports, etc.) and technical support required for fabrication and installation of aircraft structural components.  Must be able to perform the research required for completion of task assignments (with minimal guidance from the Lead engineers). 
  • Develop design data for aircraft structural components, systems components, assemblies and installations.
  • Complete assignments within scheduled milestones.
  • Provide technical assistance to fabrication shops, production, quality assurance and other departments in interpretation and implementation of design data.
  • Mentor associate structural engineers.
  • Actively works to improve daily processes.
  • Maintains a current knowledge of developments in aircraft structures.
  • Participates in projects to improve productivity and financial performance.
  • Perform other job duties as assigned.


 
 

Qualifications: 
  • Bachelors Degree in Aerospace, Aeronautical, Civil, Mechanical or Manufacturing Engineering or equivalent training and experience. 
  • Minimum 8 years engineering experience.
  • Proficient in NX Unigraphics or other similar 3D solid modeling software (such as: CATIA V5 or AutoCAD 2000). 
  • Experience with Team Center & Enovia is a plus. 
  • Attention to detail of completed designs is critical.  Ability to work with cross functional teams required.
  • Proficient at producing high quality designs within schedule and budget.
  • Must be able to work in team environment.
  • Must be able to work overtime and weekends as required.

Required: 

  • An active Secret Clearance is required.  
  • Composite experience 

 
Job Number: 1610051181
Job Location: Grand Prairie, TX
Duration: 12 months
Input Date: 01/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000001ydLQAAY&URLSource=cjhunter

Structural Design Engineer

Description:
PDS Tech is seeking Structural Design Engineers for openings in the St. Louis, MO area and other locations across the US. 
Locations vary. Please contact a recruiter to determine currently open and upcoming locations.  

An active Secret Clearance is required.  Flexible and part-time schedules will be considered.

Provide engineering data, instructions, documents (drawings, reports, etc.) and technical support required for fabrication and installation of aircraft structural components.  Must be able to perform the research required for completion of task assignments (with minimal guidance from the Lead engineers). 
  • Develop design data for aircraft structural components, systems components, assemblies and installations.
  • Complete assignments within scheduled milestones.
  • Provide technical assistance to fabrication shops, production, quality assurance and other departments in interpretation and implementation of design data.
  • Mentor associate structural engineers.
  • Actively works to improve daily processes.
  • Maintains a current knowledge of developments in aircraft structures.
  • Participates in projects to improve productivity and financial performance.
  • Perform other job duties as assigned.


 
 

Qualifications: 
  • Bachelors Degree in Aerospace, Aeronautical, Civil, Mechanical or Manufacturing Engineering or equivalent training and experience. 
  • Minimum 8 years engineering experience.
  • Proficient in NX Unigraphics or other similar 3D solid modeling software (such as: CATIA V5 or AutoCAD 2000). 
  • Experience with Team Center & Enovia is a plus. 
  • Attention to detail of completed designs is critical.  Ability to work with cross functional teams required.
  • Proficient at producing high quality designs within schedule and budget.
  • Must be able to work in team environment.
  • Must be able to work overtime and weekends as required.

Required: 

  • An active Secret Clearance is required.  
  • Composite experience 

 
Job Number: 1610051189
Job Location: Marietta, GA
Duration: 12 months
Input Date: 01/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000001ydM4AAI&URLSource=cjhunter

Structural Design Engineer

Description:
PDS Tech is seeking Structural Design Engineers for openings in the St. Louis, MO area and other locations across the US. 
Locations vary. Please contact a recruiter to determine currently open and upcoming locations.  
An active Secret Clearance is required.  Flexible and part-time schedules will be considered.


Provide engineering data, instructions, documents (drawings, reports, etc.) and technical support required for fabrication and installation of aircraft structural components.  Must be able to perform the research required for completion of task assignments (with minimal guidance from the Lead engineers). 
  • Develop design data for aircraft structural components, systems components, assemblies and installations.
  • Complete assignments within scheduled milestones.
  • Provide technical assistance to fabrication shops, production, quality assurance and other departments in interpretation and implementation of design data.
  • Mentor associate structural engineers.
  • Actively works to improve daily processes.
  • Maintains a current knowledge of developments in aircraft structures.
  • Participates in projects to improve productivity and financial performance.
  • Perform other job duties as assigned.


 
 

Qualifications: 
  • Bachelors Degree in Aerospace, Aeronautical, Civil, Mechanical or Manufacturing Engineering or equivalent training and experience. 
  • Minimum 8 years engineering experience.
  • Proficient in NX Unigraphics or other similar 3D solid modeling software (such as: CATIA V5 or AutoCAD 2000). 
  • Experience with Team Center & Enovia is a plus. 
  • Attention to detail of completed designs is critical.  Ability to work with cross functional teams required.
  • Proficient at producing high quality designs within schedule and budget.
  • Must be able to work in team environment.
  • Must be able to work overtime and weekends as required.

Required: 

  • An active Secret Clearance is required.  
  • Composite experience 

 
Job Number: 1610051182
Job Location: El Segundo, CA
Duration: 12 months
Input Date: 01/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000001ydLVAAY&URLSource=cjhunter

Structural Design Engineer

Description:
PDS Tech is seeking Structural Design Engineers for openings in the St. Louis, MO area and other locations across the US. 
Locations vary. Please contact a recruiter to determine currently open and upcoming locations.  

An active Secret Clearance is required.  Flexible and part-time schedules will be considered.

Provide engineering data, instructions, documents (drawings, reports, etc.) and technical support required for fabrication and installation of aircraft structural components.  Must be able to perform the research required for completion of task assignments (with minimal guidance from the Lead engineers). 
  • Develop design data for aircraft structural components, systems components, assemblies and installations.
  • Complete assignments within scheduled milestones.
  • Provide technical assistance to fabrication shops, production, quality assurance and other departments in interpretation and implementation of design data.
  • Mentor associate structural engineers.
  • Actively works to improve daily processes.
  • Maintains a current knowledge of developments in aircraft structures.
  • Participates in projects to improve productivity and financial performance.
  • Perform other job duties as assigned.


 
 

Qualifications: 
  • Bachelors Degree in Aerospace, Aeronautical, Civil, Mechanical or Manufacturing Engineering or equivalent training and experience. 
  • Minimum 8 years engineering experience.
  • Proficient in NX Unigraphics or other similar 3D solid modeling software (such as: CATIA V5 or AutoCAD 2000). 
  • Experience with Team Center & Enovia is a plus. 
  • Attention to detail of completed designs is critical.  Ability to work with cross functional teams required.
  • Proficient at producing high quality designs within schedule and budget.
  • Must be able to work in team environment.
  • Must be able to work overtime and weekends as required.

Required: 

  • An active Secret Clearance is required.  
  • Composite experience 

 
Job Number: 1610051188
Job Location: Warner Robins, GA
Duration: 12 months
Input Date: 01/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000001ydLzAAI&URLSource=cjhunter

Structural Design Engineer

Description:
PDS Tech is seeking Structural Design Engineers for openings in the St. Louis, MO area and other locations across the US. 
Locations vary. Please contact a recruiter to determine currently open and upcoming locations.  

An active Secret Clearance is required.  Flexible and part-time schedules will be considered.

Provide engineering data, instructions, documents (drawings, reports, etc.) and technical support required for fabrication and installation of aircraft structural components.  Must be able to perform the research required for completion of task assignments (with minimal guidance from the Lead engineers). 
  • Develop design data for aircraft structural components, systems components, assemblies and installations.
  • Complete assignments within scheduled milestones.
  • Provide technical assistance to fabrication shops, production, quality assurance and other departments in interpretation and implementation of design data.
  • Mentor associate structural engineers.
  • Actively works to improve daily processes.
  • Maintains a current knowledge of developments in aircraft structures.
  • Participates in projects to improve productivity and financial performance.
  • Perform other job duties as assigned.


 
 

Qualifications: 
  • Bachelors Degree in Aerospace, Aeronautical, Civil, Mechanical or Manufacturing Engineering or equivalent training and experience. 
  • Minimum 8 years engineering experience.
  • Proficient in NX Unigraphics or other similar 3D solid modeling software (such as: CATIA V5 or AutoCAD 2000). 
  • Experience with Team Center & Enovia is a plus. 
  • Attention to detail of completed designs is critical.  Ability to work with cross functional teams required.
  • Proficient at producing high quality designs within schedule and budget.
  • Must be able to work in team environment.
  • Must be able to work overtime and weekends as required.

Required: 

  • An active Secret Clearance is required.  
  • Composite experience 

 
Job Number: 1610051187
Job Location: Greenville, TX
Duration: 12 months
Input Date: 01/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000001ydLuAAI&URLSource=cjhunter

Structural Design Engineer

Description:
PDS Tech is seeking Structural Design Engineers for openings in the St. Louis, MO area and other locations across the US. 
Locations vary. Please contact a recruiter to determine currently open and upcoming locations.  
An active Secret Clearance is required.  Flexible and part-time schedules will be considered.


Provide engineering data, instructions, documents (drawings, reports, etc.) and technical support required for fabrication and installation of aircraft structural components.  Must be able to perform the research required for completion of task assignments (with minimal guidance from the Lead engineers). 
  • Develop design data for aircraft structural components, systems components, assemblies and installations.
  • Complete assignments within scheduled milestones.
  • Provide technical assistance to fabrication shops, production, quality assurance and other departments in interpretation and implementation of design data.
  • Mentor associate structural engineers.
  • Actively works to improve daily processes.
  • Maintains a current knowledge of developments in aircraft structures.
  • Participates in projects to improve productivity and financial performance.
  • Perform other job duties as assigned.


 
 

Qualifications: 
  • Bachelors Degree in Aerospace, Aeronautical, Civil, Mechanical or Manufacturing Engineering or equivalent training and experience. 
  • Minimum 8 years engineering experience.
  • Proficient in NX Unigraphics or other similar 3D solid modeling software (such as: CATIA V5 or AutoCAD 2000). 
  • Experience with Team Center & Enovia is a plus. 
  • Attention to detail of completed designs is critical.  Ability to work with cross functional teams required.
  • Proficient at producing high quality designs within schedule and budget.
  • Must be able to work in team environment.
  • Must be able to work overtime and weekends as required.

Required: 

  • An active Secret Clearance is required.  
  • Composite experience 

 
Job Number: 1610051184
Job Location: San Diego, CA
Duration: 12 months
Input Date: 01/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000001ydLfAAI&URLSource=cjhunter

Structural Design Engineer

Description:
PDS Tech is seeking Structural Design Engineers for openings in the St. Louis, MO area and other locations across the US. 
Locations vary. Please contact a recruiter to determine currently open and upcoming locations.  
An active Secret Clearance is required.  Flexible and part-time schedules will be considered.


Provide engineering data, instructions, documents (drawings, reports, etc.) and technical support required for fabrication and installation of aircraft structural components.  Must be able to perform the research required for completion of task assignments (with minimal guidance from the Lead engineers). 
  • Develop design data for aircraft structural components, systems components, assemblies and installations.
  • Complete assignments within scheduled milestones.
  • Provide technical assistance to fabrication shops, production, quality assurance and other departments in interpretation and implementation of design data.
  • Mentor associate structural engineers.
  • Actively works to improve daily processes.
  • Maintains a current knowledge of developments in aircraft structures.
  • Participates in projects to improve productivity and financial performance.
  • Perform other job duties as assigned.


 
 

Qualifications: 
  • Bachelors Degree in Aerospace, Aeronautical, Civil, Mechanical or Manufacturing Engineering or equivalent training and experience. 
  • Minimum 8 years engineering experience.
  • Proficient in NX Unigraphics or other similar 3D solid modeling software (such as: CATIA V5 or AutoCAD 2000). 
  • Experience with Team Center & Enovia is a plus. 
  • Attention to detail of completed designs is critical.  Ability to work with cross functional teams required.
  • Proficient at producing high quality designs within schedule and budget.
  • Must be able to work in team environment.
  • Must be able to work overtime and weekends as required.

Required: 

  • An active Secret Clearance is required.  
  • Composite experience 

 
Job Number: 1610051185
Job Location: Denver, CO
Duration: 12 months
Input Date: 01/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000001ydLkAAI&URLSource=cjhunter

Structural Design Engineer

Description:
PDS Tech is seeking Structural Design Engineers for openings in the St. Louis, MO area and other locations across the US. 
An active Secret Clearance is required.  Flexible and part-time schedules will be considered.

Provide engineering data, instructions, documents (drawings, reports, etc.) and technical support required for fabrication and installation of aircraft structural components.  Must be able to perform the research required for completion of task assignments (with minimal guidance from the Lead engineers). 
  • Develop design data for aircraft structural components, systems components, assemblies and installations.
  • Complete assignments within scheduled milestones.
  • Provide technical assistance to fabrication shops, production, quality assurance and other departments in interpretation and implementation of design data.
  • Mentor associate structural engineers.
  • Actively works to improve daily processes.
  • Maintains a current knowledge of developments in aircraft structures.
  • Participates in projects to improve productivity and financial performance.
  • Perform other job duties as assigned.


 
 

Qualifications: 
  • Bachelors Degree in Aerospace, Aeronautical, Civil, Mechanical or Manufacturing Engineering or equivalent training and experience. 
  • Minimum 8 years engineering experience.
  • Proficient in NX Unigraphics or other similar 3D solid modeling software (such as: CATIA V5 or AutoCAD 2000). 
  • Experience with Team Center & Enovia is a plus. 
  • Attention to detail of completed designs is critical.  Ability to work with cross functional teams required.
  • Proficient at producing high quality designs within schedule and budget.
  • Must be able to work in team environment.
  • Must be able to work overtime and weekends as required.

Required: 

  • An active Secret Clearance is required.  
  • Composite experience 

 
Job Number: 1610051178
Job Location: Huntsville, AL
Duration: 12 months
Input Date: 01/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000001ydLBAAY&URLSource=cjhunter

Structural Design Engineer

Description:
PDS Tech is seeking Structural Design Engineers for openings in the St. Louis, MO area and other locations across the US. 
Locations vary. Please contact a recruiter to determine currently open and upcoming locations.  
An active Secret Clearance is required.  Flexible and part-time schedules will be considered.


Provide engineering data, instructions, documents (drawings, reports, etc.) and technical support required for fabrication and installation of aircraft structural components.  Must be able to perform the research required for completion of task assignments (with minimal guidance from the Lead engineers). 
  • Develop design data for aircraft structural components, systems components, assemblies and installations.
  • Complete assignments within scheduled milestones.
  • Provide technical assistance to fabrication shops, production, quality assurance and other departments in interpretation and implementation of design data.
  • Mentor associate structural engineers.
  • Actively works to improve daily processes.
  • Maintains a current knowledge of developments in aircraft structures.
  • Participates in projects to improve productivity and financial performance.
  • Perform other job duties as assigned.


 
 

Qualifications: 
  • Bachelors Degree in Aerospace, Aeronautical, Civil, Mechanical or Manufacturing Engineering or equivalent training and experience. 
  • Minimum 8 years engineering experience.
  • Proficient in NX Unigraphics or other similar 3D solid modeling software (such as: CATIA V5 or AutoCAD 2000). 
  • Experience with Team Center & Enovia is a plus. 
  • Attention to detail of completed designs is critical.  Ability to work with cross functional teams required.
  • Proficient at producing high quality designs within schedule and budget.
  • Must be able to work in team environment.
  • Must be able to work overtime and weekends as required.

Required: 

  • An active Secret Clearance is required.  
  • Composite experience 

 
Job Number: 1610051180
Job Location: Fort Worth, TX
Duration: 12 months
Input Date: 01/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000001ydLLAAY&URLSource=cjhunter

Structural Design Engineer

Description:
PDS Tech is seeking Structural Design Engineers for openings in the St. Louis, MO area and other locations across the US. 
An active Secret Clearance is required.  Flexible and part-time schedules will be considered.

Provide engineering data, instructions, documents (drawings, reports, etc.) and technical support required for fabrication and installation of aircraft structural components.  Must be able to perform the research required for completion of task assignments (with minimal guidance from the Lead engineers). 
  • Develop design data for aircraft structural components, systems components, assemblies and installations.
  • Complete assignments within scheduled milestones.
  • Provide technical assistance to fabrication shops, production, quality assurance and other departments in interpretation and implementation of design data.
  • Mentor associate structural engineers.
  • Actively works to improve daily processes.
  • Maintains a current knowledge of developments in aircraft structures.
  • Participates in projects to improve productivity and financial performance.
  • Perform other job duties as assigned.


 
 

Qualifications: 
  • Bachelors Degree in Aerospace, Aeronautical, Civil, Mechanical or Manufacturing Engineering or equivalent training and experience. 
  • Minimum 8 years engineering experience.
  • Proficient in NX Unigraphics or other similar 3D solid modeling software (such as: CATIA V5 or AutoCAD 2000). 
  • Experience with Team Center & Enovia is a plus. 
  • Attention to detail of completed designs is critical.  Ability to work with cross functional teams required.
  • Proficient at producing high quality designs within schedule and budget.
  • Must be able to work in team environment.
  • Must be able to work overtime and weekends as required.

Required: 

  • An active Secret Clearance is required.  
  • Composite experience 

 
Job Number: 1610051152
Job Location: Houston, TX
Duration: 12 months
Input Date: 01/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000001ydHEAAY&URLSource=cjhunter

Structural Design Engineer

Description:
PDS Tech is seeking a Structural Design Engineer in St. Louis, MO  
An active Secret Clearance is required.  Flexible and part-time schedules will be considered.

Provide engineering data, instructions, documents (drawings, reports, etc.) and technical support required for fabrication and installation of aircraft structural components.  Must be able to perform the research required for completion of task assignments (with minimal guidance from the Lead engineers). 
  • Develop design data for aircraft structural components, systems components, assemblies and installations.
  • Complete assignments within scheduled milestones.
  • Provide technical assistance to fabrication shops, production, quality assurance and other departments in interpretation and implementation of design data.
  • Mentor associate structural engineers.
  • Actively works to improve daily processes.
  • Maintains a current knowledge of developments in aircraft structures.
  • Participates in projects to improve productivity and financial performance.
  • Perform other job duties as assigned.


 
 

Qualifications: 
  • Bachelors Degree in Aerospace, Aeronautical, Civil, Mechanical or Manufacturing Engineering or equivalent training and experience. 
  • Minimum 8 years engineering experience.
  • Proficient in NX Unigraphics or other similar 3D solid modeling software (such as: CATIA V5 or AutoCAD 2000). 
  • Experience with Team Center & Enovia is a plus. 
  • Attention to detail of completed designs is critical.  Ability to work with cross functional teams required.
  • Proficient at producing high quality designs within schedule and budget.
  • Must be able to work in team environment.
  • Must be able to work overtime and weekends as required.

Required: 

  • An active Secret Clearance is required.  
  • Composite experience 

 
Job Number: 1610050801
Job Location: Hazelwood, MO
Duration: 12 months
Input Date: 01/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000001ybKsAAI&URLSource=cjhunter

Structural Drafter

Description:
Primary Responsibilities:
Has considerable knowledge of the job. Has good understanding of the general and detailed aspects of the job and their practical applications to problems and situations ordinarily encountered. Performs work of more complex scope. Works under limited supervision; work is reviewed for adequacy on completion and interacts with internal and external personnel on matters of moderate importance.
Performs CAD drafting skills using Revit and AutoCAD software to perform tasks. 
Assisting in the coordination of projects from conception (feasibility) through final plan and detailing preparations. 
Providing support to Lead Designer and or leading smaller projects and staff members as needed.
  • Candidate must have a complete understanding of how to read drawings.  Individual will perform tasks using well-defined standards and procedures. 
  • Tasks require moderate to strong understanding of general and detailed job aspects and develop solutions to problems and situations.
  • Primary tasks include CAD drafting using Revit and AutoCAD software. 
  • Work is focused around the design of new structures and retrofit of existing structures for manufacturing facilities.  Proficiency utilizing other standard computer applications a plus.
  • Coordination with other disciplines may also be required which includes gathering information in person or from drawings.  Positive and committed attitude is essential.

Lines of Business

  • Pulp & Paper
  • Power & Utilities
  • Consumer Products
  • Food & Beverage

Core Work – Industrial Buildings & Structures (Framing & Foundation Design)

  • Building Additions & Renovations
  • Paper Machine Rebuilds
  • Platforms & Mezzanines
  • Monorails, Pick points & Crane runways
  • Pipe Racks, Towers & Access Structures

Training and Experience:
  • Candidate must have graduated in an Architectural or Structural Program curriculum with a structural emphasis.
  • Strong working knowledge of Revit and AutoCad is required with Microstation or other CADD a plus. 
  • Strong communication and organizational skills.
  • Ability to effectively interface with all levels of personnel and management.
  • Ability to work and thrive in a team environment.
  • Strong problem solving skills.
  • Ability to self-motivate and work productively without supervision.
  • Working knowledge of MS Office Applications is required.
  • Excellent oral and written communication skills.
  • Industrial projects preferred.
  • 3-7 years of experience

 
Job Number: 1610060696
Job Location: Green Bay, WI
Duration: 6 months
Input Date: 01/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Sue Van Pay
Address: 110 PACKERLAND DR STE A
City, State: GREEN BAY, WI 54303
Phone: 920/499-9943
800 Phone: 800/333-1389
Fax Phone: 920/499-9067
Email: cecjgreenbay@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002FxCzAAK&URLSource=cjhunter

Supply Chain/Contract Negotiator

Description:
Supply Chain - Contract Negotiator - 

Position Summary
 
This position negotiates and administers complex subcontracts and uses discretionary latitude to negotiate financial, contractual, technical terms, conditions, and provisions to establish and maintain major subcontracts.
 
Responsibilities may include:
- Responsible for executing standard purchasing procedures within an assigned commodity to ensure the timely delivery of supplies and materials.
- The successful candidate will be the key interface for subcontract administration of major systems and complex components for aircraft production, product upgrade and new program development.
- Additional responsibilities include but are not limited to, purchase order management, competitive pricing adherence, inventory analysis, new supplier qualification and negotiation of long term agreements.
- This position will work closely with Engineering, Quality and Operations in order to facilitate cost reduction initiatives that enhance the overall affordability and quality of our aircraft.
- The candidate will also utilize discretionary latitude within approved purchasing procedures and compliance for all contractual obligations regarding Bell Helicopter and the Supplier. Establish and maintain comprehensive and current subcontracts that adhere to program requirements and obligations.
- As required, the candidate will also obtain and furnish supplier data to other functional disciplines and IPT management.
 
Required Education
- Bachelors degree in Supply Chain, Business Administration, Industrial Technology/Management, Finance, Accounting, Engineering or similar. Must have 2 years of negotiating, subcontract administration, or relevant experience.
 
Required Experience
- Must have strong familiarity with Microsoft applications including, Excel, Project and PowerPoint.
- Advanced degree in one of the areas listed above may be substituted for some professional work experience requirements.
 
Preferred Experience
- Preference for USG acquisitions, strategic sourcing, commodity management and/or contract experience, financial analysis, cost analysis of commodity/raw materials, understanding of direct/indirect commodity pricing.
 
 
 

 
Job Number: 1610048191
Job Location: Hurst, TX
Duration: 6 months
Input Date: 01/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Rebecca Burrows
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i500000026GMiAAM&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer II (Architecture)

Description:
Role: Systems Engineer II (Architecture)
Duration: Temp-to-Hire
Location: Rancho Santa Margarita, CA.

Job Summary
• System Engineer that has a passion for network Architecture infusion Aerospace Software and Hardware.
• Performs systems engineering tasks as part of design and development process for secure communication system product lines. Abilities must include an in-depth understanding and experience with software, mechanical and electrical knowledge and skills in performing the analysis, specifications, requirements, traceability, compliance to standards, implementation, testing verification & validation, and documentation.

Primary Responsibilities
• Participates on product teams to provide systems engineering expertise in design, development, programming, testing, and implementation for secure communication systems product lines.
• This includes, but not limited to, analysis, specifications, requirements, traceability, compliance to standards, implementation, testing verification & validation, documentation, test fixtures, and test procedures.
• Must have a working knowledge of real time embedded software and related features, as well as the ability to provide design guidance to the Engineering staff performing design and development tasks.
• Ability to documents new features in specifications and requirements documentation to an engineering level.
• Ability and experience with requirements traceability, from a system specification level, to software requirements, to software code, to software test cases, to system functional test cases.
• Work with Sales, Marketing, Program Management, and the other engineering functions to define, scope, estimate and schedule.
• Performs related duties and responsibilities as assigned.

Qualifications:
• Experience with Ethernet and IP networking technologies, including Voice over Internet Protocol (VoIP), control mechanisms like SNMP, and Quality of Service (QoS).
• Experience with aerospace and defense standards such as SAE/AS9100, RTCA/DO-178, RTCA/DO-254, RTCA/DO-160, as well as military standards.
• Experience with U.S. FAA flight standards related to RTCA/DO-178 and RTCA/DO-254, such as ARP4754 (Guidelines for Development of Civil Aircraft and Systems) and ARP4761 (Safety Assessment Process).
• Good writing and communication skills as demonstrated by employment interview and success in prior positions.
• Must have demonstrated hands-on work approach and examples of hands-on involvement in prior work positions.
• Demonstrated successful task management skills utilized in prior positions.
• Must have a demonstrated ability to be creative, persistent and stay with a problem until it is resolved.

Education/Previous Experience Requirements:
• Bachelor’s Degree or Master’s Degree in Mechanical Engineering, Electrical Engineering, Physics, Software Engineering, or related field.
• 5-10 years of experience in an engineering capacity with knowledge of communication systems, systems.
• U.S. Export Policy Notice::To comply with U.S. export laws and regulations.
 
Job Number: 52841
Job Location: Rancho Santa Margarita, CA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: 12+ Months
Start Date: ASAP
Input Date: 12/07/2017
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Naveed
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
TH-AVIONICS-Grade 07

Description:
Seeking a candidate for a Commercial Avionics Systems Engineer to be an integral part of a small and fast-paced team supporting the engineering projects, product development, and test.
Researches, develops, designs, and tests electrical components, equipment, systems, and networks. Designs electrical equipment, facilities, components, products, and systems for commercial, industrial, and domestic purposes.
Airframes may include, but are not limited to S-76, S-92 and their derivatives, including integration of new technologies into the S-92.

PRIMARY RESPONSIBILITIES
1. Development of requirements
2. System Integration
3. Generation of lab and aircraft test procedures
4. Troubleshooting avionics issues on test, production and fielded aircraft
5. Support program management reviews

BENEFICIAL EXPERIENCE
- FAA and foreign certification (preferred)
- DO-178B, DO-160 and DO-254 processes (preferred)
- Technical project management (preferred)
- Supplier technical management (preferred)
- Pilot or A&P experience (preferred)

EDUCATIONAL REQUIREMENTS
- BS Engineering in a related field w/7+ years relevant professional experience
- Will consider non-degreed candidates who have equivalent professional experience (11+ years)
 
Job Number: 17-703-1551
Job Location: Northeast
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 01/08/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Test Engineer / Mechanical Lab II

Description:
Test Engineer / Mechanical Lab II

Canoga Park, CA
6 Month Contract
$34.00-37.00/Hr

1st Shift

Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **



-This position is for a test engineer in the Materials Characterization & Analysis group in the Material & Process Engineering Department.

-Selected candidate will be responsible for providing materials related technical support for metallic and non-metallic materials to product teams.

-Materials testing, involves the use of varied testing equipment and instruments to perform tensile test, hardness testing, Impact Testing for oxygen compatibility, flammability testing, environmental exposure material conditioning and testing.

-Position requires good hands on skills and familiarity with various measurement tools, and gages, and ability to read and interpret both Spec and Eng hardware drawings.

-Personnel should be able to prep and fabricate test samples, and measure density and specific gravities as needed.

Skills:
-Candidates must have the ability to work in a team oriented environment, have excellent problem solving skills, interpersonal and communication skills, organizational and strong computer knowledge is mandatory. Hands on experience with tensile machines, hardness tester, measurement tools i.e. micrometers, calipers, depth gages, etc.

-Some experience in an industrial setting is also desirable as well as demonstrated proficiency in practical application of engineering principles, or quality systems support.

-Familiarity with Materials Specifications and working knowledge of ASTM test procedures are a plus.

-Familiarity with gaseous & liquid delivery systems and their related components, i.e. plumbing, valves, gages & safety relief systems is highly desirable.

-The ability to design & create engineering drawings for the fabrication of unique test components and fixtures is also a plus.

Education:
AA degree or higher with 5-10 years lab/material testing experience is highly desired.
 
Job Number: 8097
Job Location: Canoga Park, CA
Rate: 34.00-37.00/Hr
Per Diem: Possible Split
Overtime: Possible
Duration: 6 Mos
Start Date: ASAP
Input Date: 12/12/2017
Firm Name: INCONEN CORPORATION
Attention: Brad
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Test Operations Manager -Direct Hire-

Description:
Job Description:

Johnson Service Group is looking for a Test Operations Manager.


Essential Functions and Responsibilities:

-Manages the daily operations and assignments of the Test Development, Production sustaining Test Engineering and support teams.
-Collaborates with Customer Focused Teams (CFTs) and Production Operations to ensure daily committed objectives are realized.
Teams include; Functional Test Development, Functional Test-Sustaining, In-Circuit Test (HP3070) Development, ICT Sustaining, Flying Probe (Takaya 9411, SPEA 4060) Development, Sustaining engineering, functional and ICT debug technicians.
-Supports Sales with new prospect engagements to understand product testing requirements as technical resource.
-Creates product test development project plans and timelines.
-Supports all related activities including direct engagement with customers engineering staff and Corporate Global Engineering resources to ensure project objective are met.
-Engages with third party supporting resources and suppliers as necessary.
-Collaborates closely with staff on product test platform issues, trending product failures, etc. to define resolution, escalates as necessary.
-Makes recommendations for continuous improvement opportunities.
-Manages the Department’s equipment assets.
-Defines what equipment is or may be required to support current and future customer’s product testing requirements
-Creates equipment acquisition justifications and requests
-Collaborates with Quality Engineering for process improvement, supports internal and external corrective actions
-Supports and drives Department 5-S and other organizational opportunities.
-Provides daily statistics on work in process and resource planning in support of Production requirements.
-Follows all health and safety policies at all times
-Possesses excellent communication, listening and interpersonal skills with the ability to interact with multi-cultural backgrounds and build trusting relationships in order to gain support, achieve results within the organization.
-Possesses a high degree of integrity in the handling of confidential and sensitive information
-Must be motivated and self-directed, highly dependable with excellent multi-tasking and time management skills.
-Supportive of Lean, Six Sigma and related continuous improvement initiatives of critical operational metrics across key functions.
-Maintaining courteous, professional and effective working relationships with employees at all levels of the organization

Qualifications Required / Job Specifications:

-Technically qualified; 8+ years’ experience as Sr.Test Engineer, experienced in a functional test development role preferred.
-Experience with “Open Source” development; LinuxOS, python scripting, VB and other scripting languages
-Experienced with Labview/Teststand preferred
-Experience with strategizing product test interfaces (hardware design.
-Experience in driving / supporting the development product test diagnostics in conjunction with test application development
-5+ years direct Management experience leading a team of development and sustaining production Test Engineers as well as managing a staff of supporting technicians.
-Highly experienced in creating product test strategy and project planning
-Experience performing in the EMS (contract manufacturing) industry or directly interacting with EMS providers highly preferred
-Experience as a project manager directing and overseeing and driving on time delivery of supporting material with external suppliers.
-Prior experience performing as both supplier and customer is extremely helpful.
-Experience interacting with internal and/or external product designers, system architects, etc. to extract details. necessary to develop and propose the test strategy and methods; both hardware and software.
-Experience performing in a dynamic production test environment.
-Wide ranging exposure to products of different technologies; WiFi, data center, data storage, industrial electronics (semiconductor test and performance characterization electronics, medical and automotive, etc).
-Highly skilled in the use of MS Office applications.
-Ability to present proposals, performance metrics, project status, etc. both to internal management as well as customer team
-May analyze existing or customer proposed test strategies for efficiency and cost-down opportunities.
-Negotiating skills are very helpful to achieve desired results

Mathematical Skills:

-Ability to apply advanced concepts of algebra, statistics and geometry

Physical Demands and Work Environment:

While performing the duties of the job, the employee is regularly required to sit, stand and or walk for extended periods of time; use hands and fingers to handle materials, PCBAs, etc.; reach with hands and arms; and talk and hear. The employee must occasionally lift and or move up to 30 pounds unassisted and have steady hands and dexterity. Specific vision abilities required by this position include close vision, peripheral vision, depth perception and focus adjustment.
 
Job Number: 362271
Job Location: Milpitas, CA
Rate: $125k
Per Diem: No
Overtime: No
Duration: Permanent
Start Date: ASAP
Input Date: 01/19/2018
Firm Name: JOHNSON SERVICE GROUP
Attention: Sidney Williams
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Email: swilliams@jsginc.com
Website: www.jsginc.com

Back to Advanced Job Search