Job Search Results

707 listings were found that matched your search words: Keywords: Mechanical ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2018/09/23 Sunday 01:59AM Pacific Time by ContractJobHunter. )

Listings 1 - 707

Go To My Job Tracker

Expand all descriptions

1st Shift

Description:
Perform maintenance in support of manufacturing facility on a variety of equipment throughout facility including machinery repairs, preventative maintenance, machine relocation, fabrication, welding, electrical repair and installation, plumbing (air, hydraulic, water) with use of a variety of equipment.  Responsible for monitoring hazardous waste for removal, maintenance of chemical storage area and clean up of chemical spills as required.  Nontoxic or non-hazardous.  Mainly Soap and/or grease
Will be operating a crane or fork lift.
 
Responsibilities:
Provide maintenance support in all areas of manufacturing facility including but not limited to machinery repairs, preventative maintenance, machine relocation, fabrication, welding, electrical repair and installation, plumbing (air, hydraulic, water) with use of a variety of equipment such as hand tools, welding equipment, fork lifts, and precision measuring equipment.  Maintain and develop preventative maintenance program for production related equipment.  Required to perform work in compliance to all safety and EHS policies and procedures. 
 
Qualifications:
  • Knowledge of EHS procedures and policies
  • Knowledge and safe use of production related equipment
  • Working knowledge and use of welding, electrical, and plumbing equipment including repair and maintenance of machinery
  • Millwright Skills and familiar with Electrical and/or Hydraulic
  • Able to interpret OEM handbooks and/or plant diagrams
  • Understanding of reading building plans and electrical schematics
  • Ability to use trouble-shooting and precision measuring equipment
  • Where applicable, trained in maintenance processes such as but not limited to welding, plumbing, electrical and mechanical troubleshooting
  • Vocational or technical training in a maintenance related discipline, strongly preferred

 
Training requirements:

  • Demonstrated ability to comply to maintenance safety procedures such as lock-out tags, etc.
  • Demonstrate ability to safely complete job tasks utilizing manual equipment as well as use of gauges needed for repair fabrication
  • Demonstrate ability to perform preventative maintenance, and repair of facilities equipment
  • Where applicable, complete safety and maintenance training and or certification

 
 
 
 
 

 
Job Number: 1610061453
Job Location: Las Vegas, NV
Duration: 12 months
Input Date: 12/19/2016
Last Updated: 09/21/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Eric Khassanov
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002G2BqAAK&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2233 - ELECTRICAL HARNESS DESIGNER - cv - word doc only

Description:
Design and route cable and harnesses inside interior cabinets according to integration instructions and guidance.

Create the harness 3D models to support engineering deliverables (HDR & H3D).

Create 2D layout for harness install (CATIA V5).

Design per BM, BAPS, RAE documents.

Conduct and/or participate in trade-studies to enhance the product definition throughout its lifecycle.

Deliver 3D models on time to meet team%u2019s commitments and program milestones.

Review and approve supplier deliverables.

Incorporate change management authorities (RFC, PCR) into 3D models.

Contribute to the team effort by meeting the team%u2019s objectives for productivity and quality KPI%u2019s.

Contribute to other relevant tasks based on program needs and demonstrate flexibility to adapt.


Have a University degree in mechanical Engineering of equivalent work experience in harness routing.

Have over 5 years of CATIA V5 Experience in harness routing and 2D layout.

Have experience with harness manufacturing or methods (formboards).

Have minimum of 5 years of relevant working experience in Aerospace or Transportation.

Have harness installation experience and you are familiar with ECAD tools & processes, BM%u2019s and BAPS.

Have excellent communication skills including the ability to read/ write in English.

Have a strong sense of responsibility and have good organizational skills and initiative

Are innovative and open to new ideas.

Have the ability to resolve problems and conflicts.

Are comfortable working with the MS Office suite.
 
Job Number: 2233
Job Location: Montreal, Canada
Rate: 55.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 02/08/2018
Last Updated: 04/11/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2317 - HYDRO-MECHANICAL SYS. INTEGRATOR - cv - word doc

Description:
Support the Global 7000/8000 Mod-line in Montreal by leading all engineering related activities for a timely resolution to production line issues.

Witness system functional testing and conduct technical investigations on Hydro-Mechanical systems related issues, analyze and develop solutions/recommendations and reports.

Disposition RFCs, RNCs, and Supplement 2s as required.

Review functional test requirements and ensure translation into mature functional tests.

Track and ensure successful implementation of systems installations and modifications.

Work with the product development team to assist with technical proposal activities, including preparation of written material and presentations.

Recommend and review design changes.

Develop good working relationships with various departments within the company and with all suppliers.

Bachelor of Engineering Degree and eligibility for Professional Engineer registration.

15 years' experience in aircraft Hydro-Mechanical systems (Fly-By-Wire & Control Surfaces, Wing High Lift, Hydraulics, Landing Gear, Brakes, etc).

Must have previous experience with fly by wire, wing high-lift or hydraulic systems on Commercial or Business Aircraft.

Experience in providing engineering support to a Final Line/ Production.

Must have experience in the definition and certification of at least one complex aircraft control system.

Flight Controls/FBW experience would be an asset.

Must have a good understanding of all facets of system definition, integration, and certification and have a good knowledge of aircraft systems and interfaces (e.g., electrical, Hydraulic , Avionics, Auto-Flight, Flight Controls) integration, testing and installation.

Conversant with design, qualification and certification test requirements of Hydro-Mechanical systems.

Familiar with Part 25 certification requirements and advisory material.

Possess strong integration skills, in both system partner management and system technical integration.
 
Job Number: 2317
Job Location: Montreal, Canada
Rate: 64.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 01/08/2018
Last Updated: 04/11/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2321 - PROPULSION SYSTEMS ENGINEER - cv. word doc only

Description:
Design and integration of the system;

Review of the design and documentation of all the aspects related to your system;

Checking for quality of the Supplier's analyses;

Validation and verification of system requirements;

Validation and verification of system performance through design reviews, analyses, rig and aircraft testing;

Definition, preparation and execution of qualification and certification tests;

Working with supplier in the investigation and resolution of test findings;

Preparation or review of qualification or certification reports;

Working with suppliers to establish complete system requirements and system interfaces;

Liaison with stress, loads, reliability, maintainability and safety (RM&S), simulation, customer and operations support departments;

Provide support to business units in Propulsion Control requirement definition, verification and validation, following ARP4754

Identify issues and obstacles, follow-up and communicate progress;

Prepare reports or presentations.

Bachelor degree in Mechanical or Aerospace Engineering with a relevant experience of minimum of eight (8) years.

Possess very good knowledge in Propulsion Control Systems and their integration on the aircraft.

Background in design, integration, development and certification of Propulsion Systems.

Cognizant of the relevant Airworthiness Regulations and certification process.

Familiarity with Part 25 Regulations and certification requirements.

Flight testing/testing experience is an asset.

Have good oral and technical writing skills in English and French knowledge is an asset.

Motivated, self-starter, organized, autonomous and able to work under limited supervision

Team player and able to work with suppliers and customers.

Dynamic person with initiative, a strong sense of responsibility and good judgment

Have knowledge of MS Office software (essential).

Full flexibility is expected (may be on-call, shift-work, rotational work, weekends, odd hours, etc).

Must be able to travel to USA (Wichita) to support Flight testing and supplier reviews (if required).
 
Job Number: 2321
Job Location: Montreal, Canada
Rate: 58.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 01/11/2018
Last Updated: 05/18/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2327 - HYDRO-MECHANICAL SYSTEMS - FINAL ASSEMBLY LINE

Description:
Support the Client Mod-line in Montreal by leading all engineering related activities for a timely resolution to production line issues.

Witness system functional testing and conduct technical investigations on Hydro-Mechanical systems related issues, analyze and develop solutions/recommendations and reports. Disposition RFCs, RNCs, and Supplement 2s as required.

Review functional test requirements and ensure translation into mature functional tests

Track and ensure successful implementation of systems installations and modifications

Work with the product development team to assist with technical proposal activities, including preparation of written material and presentations. Recommend and review design changes

Develop good working relationships with various departments within BA and with all suppliers

Have a Bachelor of Engineering Degree and eligibility for Professional Engineer registration. AME license is an asset

Have experience in providing engineering support to a Final Line/ Production

Have 15 or more years experience in aircraft Hydro-Mechanical systems (Fly-By-Wire & Control Surfaces, Wing High Lift, Hydraulics, Landing Gear, Brakes, etc)

Are Conversant with design, qualification and certification test requirements of Hydro-Mechanical systems

Have flexibility to travel.

Are Familiar with Part 25 certification requirements and advisory material.

Possess strong integration skills, in both system partner management and system technical integration

Are familiar with Microsoft Office software tools

Have Strong communication skills, ability to work well in a multi-disciplinary team environment.

Full flexibility is expected (may be on-call, shift-work, rotational work, weekends, odd hours, etc).

Afternoon Shift (3:30 to 12:00); occasionally may have to support other shifts (as required).

Occasional business trips to Toronto and frequent travel between plants in Montreal.
 
Job Number: 2327
Job Location: Toronto, Canada
Rate: 66.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 02/01/2018
Last Updated: 03/29/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2350 - TOOL DESIGNER - cv, word doc only

Description:
Define standard tooling requirements and expertise for the production line.

Provide expertise in design and the use of tooling.

Analyze specifications and drawings to create more complex jigs, parts or tooling.

Evaluate and test new tooling products (tool proof).

Design tools, jigs, fixtures and templates.

Keep up-to-date with new technologies.

Design tools, jigs, fixtures and templates drawings.

Make tooling instructions.

College or University mechanical or aerospace
engineering degree or equivalent with a minimum of 11 years of relevant experience.

Previous experience in design and creation of MBD and 2D drawings of detail parts (machined parts, sheet metal), assemblies and installation drawings in CATIA V5.

Good understanding of hydraulic, pneumatic, and electrical systems.

Ability to read drawings for the purchase of tool.

Ability to design tools, jigs, fixtures and templates.

Knowledge of aeronautic tools.

Ability to communicate with supplier.

Catia V5 is required.

Catia V4 and Autocad are an asset.

Cost minded with the focus of maintain ability and ease of use.

Knowledge of Windows environment.

Must have experience in Primary and Secondary Aircraft Structures.

Previous experience with Mechanical systems and systems installations an asset.

Bilingual - must be able to read and write in both French and English and must have excellent communication skills.

IMPORTANT:

2 Positions available for Day shift (Start time = between 6:30 and 8:00AM)

2 Positions available for Evening shift (Start time = between 3:00PM and 5:00PM)

The workstations are shared between the 2 shifts, therefore
the start time for the evening shift depends on the start time
of the day shift.
 
Job Number: 2350
Job Location: Montreal, Canada
Rate: 63.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 6+ Mths
Start Date: ASAP
Input Date: 03/29/2018
Last Updated: 04/11/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2354 - CABINET INTEGRATOR - cv, word doc only

Description:
First point of contact for BA and Supplier Integration team

Prepares Kickoff package needed for Outsource supplier to be able to start design work.

Assists Supplier in technical solutions.

Has an Overview and general understanding of the monument including sub systems.

Coaches and Assist Supplier in understanding and following BA processes and best practices.

Highlights opportunities to improve the product/process (ex: weight reduction, DDP strategy, etc)

Reviews engineering packages to ensure that nothing is missed.

Participates in scheduling of deliverables and works with Project team to ensure that deliverable dates are meet.

Communicates Milestone readiness (3DDR model freeze, CDR exits etc).

Support Weekly Quality Meetings presenting Quality KPI to calibrate Quality

Attends IPDT weekly Meetings.

Participates and supports in Design RFCs raised by HCL and Production RFCs raised by Liaison

Bachelor's degree in Mechanical Engineering with at least five (5) to seven (7) years of Client Program experience.

Have knowledge of Catia V5 is required with a minimum of five (5) to seven (7) years of Catia design experience.

Have relevant technical experience in interior completion on Client Platform and knowledge of certification requirements, Aircraft systems and interiors.

Have good communication skills including good English writing skills, and good English and French verbal skills.

Are a team player, you have the ability to work with minimal supervision, and are able to make decisions.

Must have design experience in cabinet assembly design and/or cabinet installation.

Experience in interiors completion Design is required.

Must have good trouble shooting and organisation skills.

Must have excellent negotiation skills.

Must be detail oriented.
 
Job Number: 2354
Job Location: Montreal, Canada
Rate: 60.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 24 Mths
Start Date: ASAP
Input Date: 03/29/2018
Last Updated: 04/12/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Additive Manufacturing (AM) Integrator

Description:
Additive Manufacturing (AM) Integrator

Centennial, CO
1 Year Contract
Pay Rate: DOE

Job Summary / Description:
Job Summary (LG 4/5 equivalent):
To serve as an engineering resource for conducting additive manufacturing production and development activities, researching and implementing advanced additive manufacturing materials, technologies, and applications, mentoring early career professionals for advanced additive manufacturing-related projects in support of ULA programs and influencing the adaptation of additive manufacturing compared to traditional manufacturing methods.

Duties (Listed in order of importance with the estimated amount of time spent at each task):
• Execute metal additive manufacturing production and research tasking under the guidance of project and task leads. Conduct materials, process, and application development activities related to additive manufacturing.
• Perform hands-on R&D and evaluation of advanced materials, methods, and technologies related to additive manufacturing systems. Identify novel and innovative applications for additive manufacturing materials and technologies to generate new business opportunities. Develop “best practices” for additive manufacturing systems.
• Assist with new additive manufacturing investment activities, including assessing and recommending AM systems, championing procurements, preparing facilities, and performing machine installations and related commissioning activities.
• Develop or assist in creating proposals, internal research and development (IRAD) submissions and project estimates as required to secure new work.
• Provide ongoing mentoring to early career professionals to accelerate their learning of AM technologies and processes.
• Act as a resource to influence the adaptation of AM (both polymer & inconel) products into new designs for development programs
Note: This job summary and listing of duties is for the purpose of describing the position and its essential functions at time of hire and may change over time.
Qualifications.

Required Qualifications:
• B.S. in Mechanical Engineering, Materials Science or equivalent.
• Excellent oral and written communication and presentation skills.
• Demonstrated experience executing AM-related work.
• Ability to work independently or with others, exercising good technical judgment and interpersonal skills to work as a member of a diverse team.
• Ability to manage multiple simultaneous challenging technical tasks.
Desired Qualifications:
• M.S. in Mechanical Engineering, Materials Science, or equivalent, with more than ten (10) years of experience related to fabrication of advanced materials and structures, with 5 (5) years using additive manufacturing, especially laser-based metal powder bed fusion additive manufacturing technologies.
• Hands-on experience calibrating, running, and maintaining such systems.
 
Job Number: 8558
Job Location: Centennial, CO
Rate: DOE
Per Diem: Possible Split
Overtime: Exempt
Duration: 1 Year
Start Date: ASAP
Input Date: 03/07/2018
Last Updated: 03/14/2018
Firm Name: INCONEN CORPORATION
Attention: Brad
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Advanced Engineering Technician 2

Description:
Our client, a market leader and technology innovator, is seeking talented professionals to deliver cutting edge solutions to their customers. Well-respected, with a global presence, our client consistently offers a powerful and robust portfolio of products, services and solutions that help customers successfully execute their missions in today’s dynamic environment. With unsurpassed engineering, using an open systems approach, our client solves the nation’s most complex challenges while foreseeing future needs.

Advanced Engineering Technician 2
(US Citizenship Required*)
Scottsdale, AZ
2018-5470

Responsibilities:
• Support engineering activities such as design, test, check-out, modification, fabrication and assembly of prototype electro mechanical systems, experimental design circuitry, laser/light transmission devices or specialized test equipment
• Interpret basic engineering drawings, diagrams and schematics
• Construct, modify, debug, troubleshoot, calibrate, test, and adjust a variety of tools, equipment and systems
• Conduct, analyze, and document statistically based experiments to define process parameters
• Organize, analyze, and interpret data to identify cause/effect relationships and recommend resolution/process improvement
• Work from schematics, diagrams, written and verbal descriptions, layouts or defined plans to perform testing, checkout and trouble-shooting functions
• Handle unexpected demands and adapt to new situations
• Perform operational test and fault isolation on systems and equipment
• Assist determining methods or actions to remedy malfunctions
• Assist design, construction, test and check-out of test equipment
• Use manufacturing, test, development or diagnostic equipment, including test programs, oscilloscopes, signal generators and specialized test apparatus
• Analyze results and implements procedures for problems
• May develop test specifications and procedures
• May prepare reports, documentation/specifications as required

Qualifications:
• Required – Active Secret clearance. Candidates without active clearance will not be considered.
• Solid understanding of job; apply knowledge and skills to complete a wide range of tasks
• Work on moderately difficult assignments, requiring judgment in resolving issues or in making recommendations
• May require decision-making but with limited financial implications to the company
• Focus on completing tasks or activities supporting implementation of procedures
• Solid knowledge and proficiency in the use of fabrication tools
• Able to fabricate complex hardware
• Able to use computers and software applications to assist in job execution
*US Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Associate's degree in related discipline or equivalent is required plus a minimum of 3 years of relevant experience

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2018-5470
Job Location: Scottsdale, AZ
Duration: 12 Months
Input Date: 02/26/2018
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Jeremy Israel
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Advanced Engineering Technician 2

Description:
Our client, a market leader and technology innovator, is seeking talented professionals to deliver cutting edge solutions to their customers. Well-respected, with a global presence, our client consistently offers a powerful and robust portfolio of products, services and solutions that help customers successfully execute their missions in today’s dynamic environment. With unsurpassed engineering, using an open systems approach, our client solves the nation’s most complex challenges while foreseeing future needs.

Advanced Engineering Technician 2
(US Citizenship Required*)
Scottsdale, AZ
2018-5473

Responsibilities:
• Support engineering activities such as design, test, check-out, modification, fabrication and assembly of prototype electro mechanical systems, experimental design circuitry, laser/light transmission devices or specialized test equipment
• Frequent contact with individuals representing other departments, and/or representing outside organizations
• Perform a variety of equipment/process operations involving an application or technical skills in a specific area (electrical, software, manufacturing, etc.)
• Interpret basic engineering drawings, diagrams and schematics
• Construct, modify, debug, troubleshoot, calibrate, test and adjust a variety of tools, equipment and systems
• Conduct, analyze, and document statistically based experiments to define process parameters
• Organize, analyze, and interpret data to identify cause/effect relationships and recommends resolution/process improvement
• Implement and document complex solutions for process improvement
• Design and construct basic tooling and fixtures to accomplish unique tasks
• Perform complex troubleshooting to the component level
• Work with Engineering and Operations Support
• Work from schematics, diagrams, written and verbal descriptions, layouts or defined plans to perform testing, checkout and trouble-shooting functions
• Assist in the design, construction, test and check-out of test equipment
• Use manufacturing, test, development or diagnostic equipment, including, but not limited to, test programs, oscilloscopes, signal generators and specialized test apparatus
• Analyze results and implement procedures for problems
• May develop/prepare test specifications/procedures, reports, documentation/specifications

Qualifications:
• Required – Active Top Secret clearance required. Candidates without active clearance will not be considered.
• Solid understanding of job; apply knowledge and skills to complete a wide range of tasks
• Work on assignments that are moderately difficult, requiring judgment in resolving issues or in making recommendations
• Focus on completing tasks or activities supporting implementation of procedures
• Solid knowledge of generally accepted technical theory
• Solid knowledge and proficiency in the use of fabrication tools
• Able to fabricate complex hardware
• Able to use computers and software applications to assist in job execution
*US Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Associate's degree in related discipline or equivalent is required plus a minimum of 3 years of relevant experience

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2018-5473
Job Location: Scottsdale, AZ
Duration: 12 Months
Input Date: 02/26/2018
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Jeremy Israel
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Advanced Quality Inspector 1

Description:
Our client, a market leader and technology innovator, is seeking talented professionals to deliver cutting edge solutions to their customers. Well-respected, with a global presence, our client consistently offers a powerful and robust portfolio of products, services and solutions that help customers successfully execute their missions in today’s dynamic environment. With unsurpassed engineering, using an open systems approach, our client solves the nation’s most complex challenges while foreseeing future needs.

Advanced Quality Inspector 1
(US Citizenship Required*)
Scottsdale, AZ
2018-5467

Responsibilities:
• Perform a variety of electrical/mechanical inspection operations on incoming parts/materials.
• Make critical decisions in the inspection of complex parts, using a variety of hand tools and scopes to ensure the compliance to requirements as defined in engineering drawings, industry specifications, and internal procedures.
• Deliver innovative solutions to meet customers changing business needs.
• Maintain updated on departmental standards to ensure services are consistent with and/or superior to industry best practices.
• Support and engage in programs, projects, and practices behind the culture and strategy and comply with all policies and procedures.
• Inspect parts, materials, assemblies and equipment to determine compliance to specified requirements
• Perform product inspection, real time defect evaluation, and housekeeping audits
• Prepare QA documentation
• Verify corrective action and rework implementation
• Generate and/or verify traceability information
• May use photography equipment or set-up for electrical/mechanical tests using simple equipment
• Interface with coworkers and internal customers and other departments
• May have occasional contact with suppliers

Qualifications:
• J-STD_001, 002, IPC 610, MIL-STD-883, MIL-STD-750 and X-Ray qualification certifications may be required
• Considerable knowledge of electrical theory, ESD control, workmanship standards, geometric dimensioning and tolerancing, stats & process control techniques, and operation of automated test equipment
• Skilled using PC applications (Microsoft Word, Excel)
• Skilled using basic mechanical measurement tools
• Interpersonal skills, conflict resolution skills
• Skilled in the set-up of basic electronic test configurations or mechanical test configurations
*US Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• High School diploma or the equivalent is required. Associates degree in Electronics, Computer Science, Mechanical engineering is preferred. In addition, a minimum of 4 years of directly related experience is required.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2018-5467
Job Location: Scottsdale, AZ
Duration: 6 Months
Input Date: 02/26/2018
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Bradley Davis
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer with active secret / design of mechanical and electronic interfaces / integration test / serial buses C/C++ programming CA

Description:
160459
Requirement #AERO-REQ-0666
Work Location Palmdale, CA
Work Week 9/80
Priority High
Needed Date 11/27/2017
End Date 11/09/2018
Number of Resources 1
Security Clearance Secret

Title: Aeronautical Engineer

Description

Candidate will be responsible for designing and building a system integration laboratory (SIL). This effort includes design of mechanical and electronic interfaces to support software development, integration and test efforts. Candidate will have hands-on hardware experience and software skills. Candidate will be able to troubleshoot hardware/software integration issues and perform integration and test. Define, develop, analyze and coordinate SIL requirements, allocate requirements and define interfaces between subsystems. Effort also includes flow down of requirements to procurement specifications, and management of vendor selection and vendor performance, including verification of requirements. The candidate will support system/software verification and validation effort and customer reviews during all phases of system development. The candidate will develop and support integration and system check out (SCO) procedures on flight test article and support pre-flight and post-flight analysis and reviews. Good oral and written communication skills are required as is the ability to flex and adapt in a fast-paced team environment. Complex organization and documentation skills are required.

Skill/Experience/Education

Mandatory:

Final Secret Clearance.

Hardware and software integration experience.
Demonstrated ability to design and troubleshoot mechanical and electronic interfaces to support software development and test.
C or C++ programming experience.
Experience with serial buses.

Desired:

B.S. Degree or above in an Engineering Discipline Several years of laboratory experience


Interview Required Yes
OT Allowed Yes (OT Limitation: No)
Travel No
Non-Exempt

Rates
0-4 Yrs Pay Rate: 65.00 USD
5-8 Yrs Pay Rate: 70.00 USD
9+ Yrs Pay Rate: 75.00 USD
 
Job Number: JE-0666
Job Location: Palmdale, CA
Rate: 65-75/hr DOE
Duration: 12 month contract
Input Date: 12/04/2017
Last Updated: 03/15/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Engineers - Atlanta, GA

Description:
STS AeroStaff Services is hiring Aerospace Engineers in Atlanta, Georgia.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Duties:

• Perform research and surveys to determine the best methods to modify aircraft to accomplish project statements of work.
• Design new mechanical parts, assemblies and installations defining aircraft modifications.
• Perform analysis and substantiation of new parts and installations.
• Produce engineering drawings, reports, material lists and work instructions to document & install aircraft modifications.
• Provide engineering checks of data produced by peer groups or other project participants.
• Provide technical support during manufacturing and installation of aircraft modifications.
• Interface with customers, suppliers and other project stakeholders pertaining to modification projects.
• Provide guidance and oversight to engineering peer group, and mentor new engineers to operate within departmental practices and procedures.
• Provide statements of work, cost estimates, completion schedules and other project administrative inputs.
• Practice safety-conscious behaviors in all operational processes and procedures.

Qualifications:

• B.S. in engineering or related scientific field. Equivalent experience may be substituted.
• Three (3) years overall work experience, two (2) of which in a design engineering role.
• Must have strong computer skills and demonstrate proficiency with 2D/3D CAD systems and MS Office programs.
• Must have strong knowledge of aircraft mechanical/structural design processes, materials, fabrication methods and aerospace hardware.
• Must possess working knowledge of substantiation techniques and FAA regulatory requirements.
• Must be able to effectively utilize aircraft continued airworthiness data.
• Must be organized and an effective project manager, presenting good communication skills and a professional appearance. Preferred:
• Knowledge of aircraft interiors, composites and entertainment systems.
• Experience with Product Lifecycle Management (PLM) software.

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 41685
Job Location: Atlanta, GA
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 03/05/2018
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Airframe Design Engineer

Description:
HIGHLY DESIRABLE QUALIFICATIONS
Experience with engineering and/or manufacturing development of structural parts and assemblies utilizing composite materials.
Experience with the composite part design process, including composites stacking sequence, lamination theory, honeycomb core, bonded assemblies, manufacturing and fabrication processes and post-cure machining operations.
Knowledge of GD&T per ASME Y14.5 along with tolerance analysis capabilities.
Knowledge of ASME Y14.41 methods for Model Based Definition using CATIA V5 FTA (Functional Tolerancing and Annotations) is desired.
Experience with CATIA V5 CPD (Composite Part Design) and/or FiberSIM is a plus.
Ability to create and maintain parametric product geometry models is desired.
Experience with Smarteam product data management is desired.

SPECIFIC RESPONSIBILITIES
Produce airframe structural configuration layouts and detail designs including preliminary sizing, joint layouts, interface boundary definitions of parts and assemblies employing metallic and composite materials.  
Create and maintain CAD solid models and drawings of installations, assembly and detail components that meet all requirements such as structural integrity, interface boundaries, weight and cost targets as directed by the project engineer. Coordinate with members of stress, manufacturing, procurement, quality control and other departments as required to mature the design from conception to production.  
Create documentation to support design decisions and to identify and resolve potential issues. Prepare detail design packages for review, check and release.

MINIMUM REQUIREMENTS
BS degree in Mechanical or Aerospace engineering from an accredited university
Knowledge of 3D Computer Aided Design Program such as CATIA (preferred), w/ a focus on Generative Surface Design, Part Design and Assembly.
Hands on experience working with Carbon Composites, preferably through experience in a manufacturing environment.
Demonstrated ability to use Microsoft Excel, Word and PowerPoint
Must be a US Citizen or Legal US Permanent Resident
 
Job Number: 18-807
Job Location: Mid-Atlantic
Rate: OPEN
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 03/21/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

Assembler B

Description:
PDS Tech is seeking an Assembler for an open position in North Charleston, SC. 
  • Perform routine production assembly operations on structural and mechanical assemblies, subassemblies and aircraft systems, equipment and accessories using manual operations.
  • Select correct parts, materials, tools, assemblies, standards, hardware, etc.
  • Drill, shim, install, fit, fasten, align, adjust and perform the necessary pre-installation assembly work to accomplish the installation of structural components requiring the use of production and engineering prints to determine exact locations.
  • Report job constraints such as: errors caused by workmanship, defects in parts, materials, assembly procedures, tools, sequences, etc., in accordance with Company procedures.
  • Perform any repairs, rework, functional checks and the incorporation of authorized changes, etc., as outlined by Lead.
  • Remove and/or replace installed components and any related parts. Must be able but not limited to Drill close tolerance holes in composites, Tool indexing, Gap measurement.
  • Read and understand blueprints, drawings, schematics, engineering dispositions and instructions.
  • Be safety conscious; employ the use of safety glasses, safety harnesses, respirators, boot socks, and other pertinent safety equipment 100% of the time.
  • Exhibit exemplary housekeeping and Foreign Object Debris (FOD) standards. Maintain clean, neat, organized and FOD free work area.
  • Possess understanding and knowledge of basic computer systems and programs

High school diploma or GED and typically 1 or more years’ related experience or an equivalent combination of education and experience. (Must have GED or HS)

Ability to perform the following requirements:



• Lift less than 25 pounds (Occasional lifting of 21-35 pounds), bend and twist at the waist, walk, crawl, crouch, stand for long periods, kneel, reach, climb/balance, flexion/extension

• Contact with sealants and solvents, exposure to noise, working on elevated platforms

• Use personal protective gear for face, eyes, ears, hand, and arms as required. 

• Pass visual acuity and color perception tests

• Read, write, and comprehend the English language

• Handle, use, and dispose of hazardous material

• Obtain & maintain training certifications as required to support assignment responsibilities

• Occasional (1 to 3 hrs) finger manipulation

• On occasion, a 2-person lift may be necessary for weights greater than 50 lbs

• Frequent reaching overhead (3 to 6 hrs)

• Frequent walking on flat surfaces

• Frequent standing flat or uneven surfaces

• Frequent balancing on a ladder, steps, or uneven surfaces

• Occasional climbing on 3-12 ft ladders or stands

• Rotation of head/neck, sitting, crawling, squatting, bend/stoop, lying down, and operate foot controls

• Occasional contact with metals

• Exposure to plastics and solvents to atmospheric conditions

• Frequent exposure to noise
 
Job Number: 1810081426
Job Location: North Charleston, SC
Duration: 6 months
Input Date: 03/08/2018
Last Updated: 09/21/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Clyde Callwood
Address: 3922 COCONUT PALM DR STE 100
City, State: TAMPA, FL 33601
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002dvptAAA&URLSource=cjhunter

Structures Assembler B (100) - SC

Description:
Chipton-Ross is seeking 100 Assemblers B's located in North Charleston, SC.

RESPONSIBILITIES:
Performs routine production assembly operations on structural and mechanical assemblies, subassemblies and aircraft systems, equipment and accessories using manual operations. Ability to select correct parts, materials, tools, assemblies, standards, hardware, etc. Drill, shim, install, fit, fasten, align, adjust and perform the necessary pre-installation assembly work to accomplish the installation of structural components requiring the use of production and engineering prints to determine exact locations. Report job constraints such as: errors caused by workmanship, defects in parts, materials, assembly procedures, tools, sequences, etc., in accordance with Client procedures. Perform any repairs, rework, functional checks and the incorporation of authorized changes, etc., as outlined by Lead. Remove and/or replace installed components and any related parts. Must be able but not limited to Drill close tolerance holes in composites, Tool indexing, Gap measurement. Ability to read and understand blueprints, drawings, schematics, engineering dispositions and instructions. Be safety conscious; employ the use of safety glasses, safety harnesses, respirators, boot socks, and other pertinent safety equipment 100% of the time. Exhibit exemplary housekeeping and Foreign Object Debris (FOD) standards. Maintain clean, neat, organized and FOD free work area. Possess understanding and knowledge of basic computer systems and programs. Ability stand for long periods of time, and work in elevated and/or confined spaces as required. Frequent overhead work may be required. Frequent overtime may be required.

ADDITIONAL REQUIREMENTS:
Lift less than 25 pounds (Occasional lifting of 21-35 pounds), bend and twist at the waist, walk, crawl, crouch, stand for long periods, kneel, reach, climb/balance, flexion/extension
Contact with sealants and solvents, exposure to noise, working on elevated platforms
Use personal protective gear for face, eyes, ears, hand, and arms as required.
Pass visual acuity and color perception tests
Read, write, and comprehend the English language
Handle, use, and dispose of hazardous material
Obtain & maintain training certifications as required to support assignment responsibilities
Occasional (1 to 3 hrs) finger manipulation
On occasion, a 2-person lift may be necessary for weights greater than 50 lbs
Frequent reaching overhead (3 to 6 hrs)
Frequent walking on flat surfaces
Frequent standing flat or uneven surfaces
Frequent balancing on a ladder, steps, or uneven surfaces
Occasional climbing on 3-12 ft ladders or stands
Rotation of head/neck, sitting, crawling, squatting, bend/stoop, lying down, and operate foot controls
Occasional contact with metals
Exposure to plastics and solvents to atmospheric conditions
Frequent exposure to noise

EDUCATION:
Accredited High School Diploma/GED and typically 1 or more years' related experience or an equivalent combination of education and experience.

WORK HOURS:
FULL TIME/VARIABLE SHIFT
- Candidates will be required to be available to work Mon - Sun with flexible hours based upon the factory.
- On assigned days, candidates may be assigned to work up to 12 hours per day; hours will be determined based upon business needs
- Candidates will be assigned to work up to 40 hours per week; hours will be determined based upon business needs

MISCELLANEOUS:
Attend and pass an Assessment prior to start date. Failure of class may be cause for assignment termination.
 
Job Number: 168679
Job Location: North Charleston, SC
Rate: $DOE
Duration: 6 Months
Input Date: 03/07/2018
Last Updated: 09/22/2018
Firm Name: CHIPTON ROSS
Attention: Christophor Long
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: clong@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Assembler Technician

Description:
Performs precision assembly on complex production and repair actuators. Adjusts or aligns through shimming and other means of mechanical adjustments specified by blueprint or other specification limits. Utilizes a variety of mechanical measuring equipment such as: Dial Indicators, Calipers, and Micrometers to obtain proper assembly-build requirements. Maintain dimensional accuracy on assemblies utilizing torque wrenches, fixtures, tooling, gauges, and other measuring devices. Required to work from assembly instructions both written and oral.

High School Diploma or GED. Preferred to have trade certificate from Aerospace Trade School
 
Job Number: 5164
Job Location: Torrance, CA
Rate: 20.00HR
Duration: 12 Months
Start Date: ASAP
Input Date: 03/02/2018
Last Updated: 03/16/2018
Firm Name: MIDCOM CORPORATION
Attention: Maurice Bradford
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Assembly Mechanic (KS)

Description:
Assemble, install, seal, rig, inspect, and complete precision and other structural and system components, working from drawings, documents, process specifications, quality control requirements, and established processes and procedures. Functional test and correct, fit form and function of assemblies and components.

Duties:
The Company will provide appropriate assistance in job training to enable employees to perform all necessary job functions including the following:
1. Work with blueprints, changes, specifications, work orders, etc. to assemble and install to quality requirements parts and assemblies.
2. Complete required data gathering transactions to facilitate assembly progression.
3. Setup and perform all manual and automated assembly operations, and portable machine functions required to accomplish assignments.
4. Perform any and all required pickup, rework, fabrication, change incorporation, functional testing or check during or after final assembly and/or assembly progression.
5. Move and/or obtain correct parts, materials, tools, assemblies, etc.
6. Use precision measuring instruments required to accomplish work assignments.
7. Report and/or investigate job handicaps such as: errors in parts, assembly procedures, tools, sequences, etc.
8. Perform routine minor machine maintenance as part of their daily work duties (e.g., where applicable, replacing machine filters, changing standard light bulbs on machines and equipment, maintaining lubrication/coolant levels, etc. as related to basic Total Preventative Maintenance duties).
9. Routinely move product within the immediate manufacturing work area, including across isle, using shop assigned equipment as required and complete transactions necessary to move product to the next operation. On an exception basis, move product to the next operation within a building.
10. Support the continuous flow of product within the manufacturing process by training, coaching and assisting employees of all classification levels.
11. Document any discrepancies according to specification, process, and procedure.
12. Cross trains in inspection and becomes SIA qualified.

Sealer - Seal parts, assemblies and sub-assemblies fillet and fay, apply leveling compound or scotch cast etc.
• Pressure / Vacuum Test - Perform visual and auditory leak checks in aircraft sections
• Precision Bench Assembly - Assemble precision aircraft parts and assemblies such as landing gear, control linkage etc.
• Sub-Assembly - Assemble parts to make sub assemblies using templates, jigs, and fixtures
• Assembly / Installation Structures - Assemble structural parts, assemblies, and skins to make larger assemblies
• Assembly / Installation Doors - Pre- assemble, trim, fit , rig , seal, align, and adjust aircraft door systems
Integral Fuel Cell - Apply sealing compounds to seal fuel cell and wing section components
• Inspection - Inspect and document non conformances on final assemblies, subassemblies, systems, and installations
Verifies dimensions of parts using both mechanical and electronic measurement tools and, relative to these inspection duties, initiate and document corrective action for programming issues and other problems.

Requirements:
3-5 years aircraft sheet metal assembly - preferably large structures.

Must have heavy background of sealing, drilling and countersinking.

Need at least some experience building the structure of the aircraft - not exclusively MRO experience.

First three days will be spent obtaining Client Certifications.

Manager will review resumes and provide disposition - no interview.
 
Job Number: FD-596762KS
Job Location: Wichita, KS
Rate: $28.00/HR
Per Diem: Possible
Overtime: Possible
Duration: 3 Months
Start Date: 3/19/2018
Input Date: 03/07/2018
Last Updated: 03/16/2018
Firm Name: FOSTER DESIGN INC
Attention: Recruiter
Address: 200 W DOUGLAS AVE STE 110
City, State: WICHITA, KS 67202
Phone: 316/832-9700
800 Phone: 800/345-3394
Fax Phone: 316/832-9357
Website: www.fosterdes.com

CNC Machinist/Operator (4) - CA

Description:
Chipton-Ross is seeking a CNC Machinist/Operator for an opening in City of Industry (3) and Walnut, CA (1).

Controls operation of single or multiple production machines in accordance with established procedures and guidelines for the process of manufacturing products

RESPONSIBILITIES:
Setups and operates a variety of machine tools such as, milling machines, to make metal parts, mechanisms, tools or machines to exacting tolerances and dimensions. Interprets blueprints, sketches, and engineering specifications; determines sequences of operations, number of cuts required, and method of setup; uses a variety of machinist's hand tools and precision measuring instruments; makes standard shop computations relating to dimensions of work, tooling, feeds, and speeds; measures, marks, and scribes dimensions and reference points to lay out stock for machining; fits and assembles precision parts into mechanical equipment and determines material, parts, and equipment required. May modify numerically controlled programs on numerically controlled (NC) machines. May monitor and verify quality in accordance with statistical process or other control procedures. Typically requires completion of a formal apprenticeship or equivalent training and experience.

REQUIRED EXPERIENCE:
Must be able to read blue prints, NC programs, understand M and G codes. Must be able to drive forklift. Must be able to lift up to 50lbs. Must know NC table setups.

HARD REQUIREMENTS:
Familiar with CNC Gantry machinery. Experience with various materials including aluminum and titanium. Candidates must have Gantry experience, 5 axis, 3 router vertical milling machines, long table setups and/or single router high speed machines such as Haandtmans. (Client manufactures long aluminum extrusions that are 50 to 100 feet long.)


EDUCATION:
Accredited High School Diploma/GED

WORK HOURS:

Full-Time

 
Job Number: 168733
Job Location: Walnut, CA
Rate: $18 to $30.00 DOE
Duration: 6 Months, 1 Year
Input Date: 02/15/2018
Last Updated: 09/22/2018
Firm Name: CHIPTON ROSS
Attention: Christian Martinez-Salceda
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: cmartinez@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Completions Design Engineer

Description:
• Design Engineer/Mechanical Engineering for Final Phase Completions.
• Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft.
• Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations.
• Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis.
• Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
• Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam.
• Design Engineer will be required to liaison with the shop on engineering issues.
• Design engineer will employ design standards consistent with company standards and accepted design methods are executed under the direction of the Mechanical Engineering Group Head to meet the manufacturing schedule.
• Additional responsibilities are out lined in the job description and as assigned by the Mechanical Engineering Group Head.
• Other preferred skills: Excel, Word and Power Point.

Experience/Education Required:
• Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
 
Job Number: 24-236
Job Location: Savannah, GA
Rate: DOE
Per Diem: YES
Overtime: YES
Duration: 1 Year plus
Start Date: ASAP
Input Date: 04/02/2018
Last Updated: 05/03/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Component Product Engineer (Project Engineer) - Level 2 / Level 3

Description:
Location: Jupiter, FL
Rate: $45.00 - $55.00/HR
Duration: 6 month contract
Shift: Regular 40 hour week. OT possible


** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


Duties:
Position is for a staff engineer for the development of rocket engine systems hardware and engine hot-fire test planning. This position requires knowledge and experience with rocket engine combustion devices hardware design and development, manufacturing processes, and vendor integration. Tasks include development of trade studies, design concepts, systems integration and component- and engine-level test plans. Hardware includes injectors, combustion chambers, nozzles, igniters.

Under general direction, the Engineer determines approaches to objectives demonstrating a complete understanding and application of engineering principles, concepts, and practices.
40%: Development and production fabrication support of Combustion Devices rocket engine components (injectors, thrust chambers, nozzles). Translates engineering and scientific concepts from preliminary ideas through entire product life cycle.
10%: Test support for combustion devices components
20%: Supplier integration with external vendors
20%: Analyzes and verifies product design and performance for adequacy and reliability. Supports investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards or safety initiative activities.
10%: Develops trade studies, design concepts, systems integration and component-level test plans.


Skills:
-Experience with liquid rocket propulsion systems desired.
-Experience working an equivalent engineering design/development environment is desired.
-General engineering/science background; Understanding and use of analytical, design or process procedures pertinent to the particular field of engineering
-Ability to read and interpret blueprints, technical drawings and specifications
-Ability to communicate clearly and concisely; May require the use of engineering test equipment, CAD, and/or various computer systems.
-Ability to operate effectively in a team environment.


Education:
-BS Degree in Mechanical Engineering, Aerospace Engineering or related field w/10+ years experience required (or equivalent).
 
Job Number: 8727
Job Location: Jupiter, FL
Rate: $45.00 - $55.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 03/07/2018
Last Updated: 05/07/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Component Product Engineer (Project Engineer) - Level 2 / Level 3 FL

Description:
161797/7804089
Job Title: Component Product Engineer (Project Engineer) - Level 2 / Level 3

Number of Positions: 2

Remaining Positions: 2

Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **



Position is for a staff engineer for the development of rocket engine systems hardware and engine hot-fire test planning. This position requires knowledge and experience with rocket engine combustion devices hardware design and development, manufacturing processes, and vendor integration. Tasks include development of trade studies, design concepts, systems integration and component- and engine-level test plans. Hardware includes injectors, combustion chambers, nozzles, igniters.



Under general direction, the Engineer determines approaches to objectives demonstrating a complete understanding and application of engineering principles, concepts, and practices.



40%: Development and production fabrication support of Combustion Devices rocket engine components (injectors, thrust chambers, nozzles). Translates engineering and scientific concepts from preliminary ideas through entire product life cycle.



10%: Test support for combustion devices components



20%: Supplier integration with external vendors



20%: Analyzes and verifies product design and performance for adequacy and reliability. Supports investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards or safety initiative activities.



10%: Develops trade studies, design concepts, systems integration and component-level test plans.

Skills:
-Experience with liquid rocket propulsion systems desired.

-Experience working an equivalent engineering design/development environment is desired.





-General engineering/science background; Understanding and use of analytical, design or process procedures pertinent to the particular field of engineering

-Ability to read and interpret blueprints, technical drawings and specifications

-Ability to communicate clearly and concisely;May require the use of engineering test equipment, CAD, and/or various computer systems.

-Ability to operate effectively in a team environment.



Education:
-BS Degree in Mechanical Engineering, Aerospace Engineering or related field w/10+ years experience required (or equivalent).

Skills:
Required
PROJECT ENGINEERAEROSPACE

State/Province: Florida
City/Town: Jupiter

Start Date: 03/26/2018 Hours Per Week: 40.00
Est. End Date: 09/23/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible.
 
Job Number: MB-7804089
Job Location: Jupiter, FL
Rate: 55/hr max
Duration: 6 months
Input Date: 04/30/2018
Last Updated: 06/12/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Component Product Engineer (Project Engineer) II/III

Description:
Location: Canoga Park, CA
Rate: $35.00 - $48.00/HR
Duration: 6 month contract


** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


Duties:
**This is NOT a Designer role. Please make sure that all candidates with a Designer background or Designer expectations are aware of this. This is a Project Engineer role **
**Candidates should have 2 to 8 years of related work experience. No recent college graduates please**
**Position is for a Component Product Engineer for the development, fabrication and test of rocket engine system interconnect hardware**


Skills:
- 25%: Development and fabrication support of rocket engine components using engineering and scientific principles.
- 25%: Translates engineering and scientific concepts from preliminary ideas through product life cycle.
- 20%: Interfaces with other members of project or program teams, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
- 10%: Develops trade studies, design concepts, systems integration and component-level test plans.
- 10%: Supplier integration with external vendors
- 10%: Analyzes and verifies product design and performance for adequacy and reliability. Supports investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards or safety initiative activities.


Education:
- A Bachelor's degree in Mechanical or Aerospace Engineering.
- Candidates should have 2 to 8 years of related work experience. No recent college graduates please.
 
Job Number: 7819
Job Location: Canoga Park, CA
Rate: $35.00 - $48.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Input Date: 04/03/2018
Last Updated: 05/07/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Component Product Engineer (Project Engineer) II/III / local preferred URGENT CA

Description:
160209/7333281

8 open positions

48/hr max

Manager is currently interviewing.

Job Title: Component Product Engineer (Project Engineer) II/III



Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **



** This is NOT a Designer role. Please make sure that all candidates with a Designer background or Designer expectations are aware of this. This is a Project Engineer role **



* Candidates should have 2 to 8 years of related work experience. No recent college graduates please *



Position is for a Component Product Engineer for the development, fabrication and test of rocket engine system interconnect hardware.

Skills:
25%: Development and fabrication support of rocket engine components using engineering and scientific principles.
25%: Translates engineering and scientific concepts from preliminary ideas through product life cycle.
20%: Interfaces with other members of project or program teams, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
10%: Develops trade studies, design concepts, systems integration and component-level test plans.
10%: Supplier integration with external vendors
10%: Analyzes and verifies product design and performance for adequacy and reliability. Supports investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards or safety initiative activities.

Education:
A Bachelor's degree in Mechanical or Aerospace Engineering.

Skills:
Required

PROJECT ENGINEER COMPONENT ENGINEERING

State/Province: California
City/Town: Canoga Park

Start Date: 09/11/2017 Hours Per Week: 40.00
Est. End Date: 03/11/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7333281
Job Location: Canoga Park, CA
Rate: 48/hr max
Duration: 6 month contract
Input Date: 04/03/2018
Last Updated: 05/18/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Component Product Engineer II / Valves & Actuators

Description:
Location: Jupiter, FL
Rate: $35.00 - $39.00/HR
Duration: 6 month contract
Shift: 1st Shift – Regular 40 hour week. OT possible

** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

Duties:
** Component Product Engineers are also known as Project Engineers **
** Bachelors degree required **

25%: Development and fabrication support of rocket engine valve and actuator components. Translates engineering and scientific concepts from preliminary ideas through product life cycle.
25%: Supplier integration with external suppliers ensuing requirements are achieved on time and within budget
20%: Interfaces with other members of project or program teams, management, and technical staff to provide coordination of technical, schedule and cost solutions to team objectives.
20%: Analyzes and verifies valve & actuator design and performance for adequacy and reliability. Supports investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards or safety initiative activities.
10%: Develops trade studies, design concepts, systems integration and component-level test plans..

Skills:
-Experience with liquid rocket propulsion systems desired.
-Understanding and use of analytical, design or process procedures pertinent to Rocket engine valve and actuator advanced development.
-Ability to read and interpret technical drawings and specifications, develop planning and procedures for assembly and test; Ability to communicate clearly and concisely; effective presentation and report writing skills will be required.
-Project skills in developing MS Project scheduling and Earned Value Measurement Systems is a plus.
-May require the use of engineering test equipment, CAD, and/or various computer systems.
-Ability to operate effectively in a team environment.
-Demonstrated leadership skills are highly desirable.

Education:
-BS Degree in Mechanical Engineering, Aerospace Engineering is required, plus 3 years experience in related field.
-MSME/AE degree is highly desirable.
 
Job Number: 8664
Job Location: Jupiter, FL
Rate: $35.00 - $39.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 06/18/2018
Last Updated: 07/02/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Component Product Engineer II / Valves & Actuators FL

Description:
161435/7671367
Job Title: Component Product Engineer II / Valves & Actuators

Number of Positions: 2

Remaining Positions: 2

Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **



** Component Product Engineers are also known as Project Engineers **



** Bachelors degree required **



25%: Development and fabrication support of rocket engine valve and actuator components. Translates engineering and scientific concepts from preliminary ideas through product life cycle.



25%: Supplier integration with external suppliers ensuing requirements are achieved on time and within budget



20%: Interfaces with other members of project or program teams, management, and technical staff to provide coordination of technical, schedule and cost solutions to team objectives.



20%: Analyzes and verifies valve & actuator design and performance for adequacy and reliability. Supports investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards or safety initiative activities.



10%: Develops trade studies, design concepts, systems integration and component-level test plans..

Skills:
-Experience with liquid rocket propulsion systems desired.

-Understanding and use of analytical, design or process procedures pertinent to Rocket engine valve and actuator advanced development.

-Ability to read and interpret technical drawings and specifications, develop planning and procedures for assembly and test; Ability to communicate clearly and concisely; effective presentation and report writing skills will be required.

-Project skills in developing MS Project scheduling and Earned Value Measurement Systems is a plus.

-May require the use of engineering test equipment, CAD, and/or various computer systems.

-Ability to operate effectively in a team environment.

-Demonstrated leadership skills are highly desirable.

Education:
-BS Degree in Mechanical Engineering, Aerospace Engineering is required, plus 3 years experience in related field.

-MSME/AE degree is highly desirable.

Skills:
Required
PROJECT ENGINEER AEROSPACE AEROSPACE ENGINEERING

Minimum Degree Required: Bachelor's Degree

State/Province: Florida
City/Town: Jupiter


Start Date: 03/05/2018 Hours Per Week: 40.00
Est. End Date: 09/02/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7671367
Job Location: Jupiter, FL
Rate: 39/hr max
Duration: 6 months
Input Date: 04/05/2018
Last Updated: 04/06/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Component Product Engineer II/Valves & Actuators

Description:
Seeking a Component Product engineer II/Valves & Actuators for an opening in Jupiter, FL.

RESPONSIBILITIES:
25%: Development and fabrication support of rocket engine valve and actuator components. Translates engineering and scientific concepts from preliminary ideas through product life cycle.
25%: Supplier integration with external suppliers ensuing requirements are achieved on time and within budget
20%: Interfaces with other members of project or program teams, management, and technical staff to provide coordination of technical, schedule and cost solutions to team objectives.
20%: Analyzes and verifies valve & actuator design and performance for adequacy and reliability. Supports investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards or safety initiative activities.
10%: Develops trade studies, design concepts, systems integration and component-level test plans..

REQUIREMENTS:
Experience with liquid rocket propulsion systems desired.
Understanding and use of analytical, design or process procedures pertinent to Rocket engine valve and actuator advanced development.
Ability to read and interpret technical drawings and specifications, develop planning and procedures for assembly and test
Ability to communicate clearly and concisely; effective presentation and report writing skills will be required.
Project skills in developing MS Project scheduling and Earned Value Measurement Systems is a plus.
May require the use of engineering test equipment, CAD, and/or various computer systems.
Ability to operate effectively in a team environment.
Demonstrated leadership skills are highly desireable.

EDUCATION
BS Degree in Mechanical Engineering, Aerospace Engineering is required, plus 3 years of experience in related field.
MSME/AE degree is highly desireable.

WORK SCHEDULE:
1st Shift, 5/40
 
Job Number: 168857
Job Location: Jupiter, FL
Rate: $40/hr
Per Diem: Yes
Overtime: Yes
Duration: 6 mths.
Start Date: ASAP
Input Date: 03/03/2018
Firm Name: CHIPTON ROSS
Attention: Melody Mullins
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Contract - DER Electro-Mechanical Systems Eng Landing Gear Systems & Hydraulic Systems

Description:
UNIQUE SKILLS
Consultant DER or EAR with current FAA authorizations in Landing Gear and related Systems and Hydraulic Systems areas - Currently in good DER or EAR standing with the FAA - Currently up to date with all required FAA DER or EAR training, certification, etc. - Eligible to be recognized and approved by the Client ODA to perform DER and/or EAR functions, including but not limited to signing 8100- and related forms in the above noted areas, in support of Client ODA projects and released engineering deliverables across the G650, G550, and G450 platforms – Previous Client experience in the above noted areas and Client aircraft platforms, as well as with Client associated Engineering release processes and procedures, in a DER or EAR and Senior Engineer role is preferred - US Citizen only
 
Job Number: 17-786-116381
Job Location: Southeast
Rate: $135.00/per hour
Per Diem: Split
Overtime: Possible
Duration: LT
Start Date: AAP
Input Date: 02/28/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Control Systems Programmer

Description:
Reviews, analyzes, and modifies programming systems including encoding, testing, debugging and installing to support an organization's client/server software applications. Accountable for field engineering support and supporting departments, including control systems engineering services for ride, show, and other ride related control systems. These services include: planning, organizing, and leading teams in troubleshooting; problem resolution; system operational enhancement; system reliability improvement; and documentation. Must have sufficient technical knowledge and awareness of details to be able to recognize when technical problems are developing in various disciplines, and to initiate appropriate corrective actions. Respond to mechanical and control emergencies resulting from Attraction downtimes.
 
Job Number: 384240
Job Location: SEATTLE, WA
Input Date: 03/07/2018
Firm Name: CDI CORPORATION
Attention: Jonathan Oleson
Address: 17177 PRESTON RD STE 300
City, State: DALLAS, TX 75248
Website: www.cdicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Data Tech Admin

Description:
Job Title: Senior Engineer-Data Tech Admin
Essential Job Functions
Become a leader in a successful and fast-growing global company.
Project Management:
Execution and Support.
Enterprise DSD (Design Specification Data) loading
Enterprise DSD (Design Specification Data) templates and standardization SAP extending views for part release
General Bill of Materials Processing Obsolete and Outdating of products in CWI/SAP Processing SAP Tech Holds Extending parts to plants in SAP Liaison to legacy project information.
Capital process as related to projects.
Setting and monitoring of weekly and monthly workload
Secondary Job Functions:
At QuEST, we often challenge our team members to temporarily work outside the scope of their primary job functions to broaden their skills and help the organization.
Some of these roles and opportunities include:
Execution within multiple services
Develop work instructions to ensure repeatability
Personnel Management
Develop and mentor global team of engineers
Execute tasks and make recommendations based on previous experience.
Lean out the process and automate routine tasks performed.
Assisting with on-boarding of new employees
Onboarding and Professional Development:
Collaborate and mentor QuEST Team Members
Cross-functional teams Geographic re-assignments
Quality Management and Continuous Improvement

Qualifications
3+ year experience in Data Tech ACTIVITIES
BS or higher in Mechanical Engineering or equivalent
Exposure to the Update industry is highly preferred
Experience with project management preferred- required to actively manage tasks
Proficiency with MS Office, particularly MS Excel, required
 
Job Number: 003
Job Location: Alvarado, TX
Rate: Open
Per Diem: Yes
Overtime: Yes
Duration: LT
Start Date: ASAP
Input Date: 03/02/2018
Firm Name: QUEST GLOBAL SERVICES
Attention: Akshay Adya
Address: 111 FOUNDERS PLAZA STE 1700
City, State: EAST HARTFORD, CT 06108
Phone: 860/726-7025
Website: www.quest-global.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer

Description:
Job Title:

Product designer Essential Job Functions Applies and interprets engineering calculations to obtain design solutions and troubleshoot erroneous results.

Defines input requirements and develops functional specifications by utilizing basic statistical methods and reliability techniques.

• Component and system level design

• Evaluation of assembly and system interactions

• Understanding of key design parameters and ability to articulate tradeoffs for a given application

• Ability to simulate systems and sub-systems, build prototypes, devise test plans, document results and designs and specify design & test systems

• Knowledge of various experimentation and verification testing methods

• Experience with troubleshooting and analysis of field failures

• Understanding of pressure, temperature and vibration considerations for downhole environments

• Good knowledge of appropriate material selection – including, but not limited to metals, coatings, elastomers

• Static structural analysis utilizing CAE software (ANSYS)

• CAD modeling and drawing creation

• Have knowledge of ASME GD&T specification

• Understand the effects and application of tolerance stacks

• Excellent communication skills (verbal and written)

• Experience managing projects with cross-functional organizations (manufacturing, operations, product management)



Desired Skills:

• Experience with drilling processes and practices

• Experience with drilling systems (reamers, coring equipment, bottom hole assemblies, MWD/LWD systems, mud motors, etc.)

• Experience with BHA and drilling dynamics analysis



Secondary Job Functions:

At QuEST, we often challenge our team members to temporarily work outside the scope of their primary job functions to broaden their skills and help the organization.

Some of these roles and opportunities include: Execution within multiple services

Project Management: Execution and Support Technical Leadership and Technical Reviews Develop work instructions to ensure repeatability

Personnel Management Onboarding and Professional Development: collaborate and mentor QuEST Team Members Cross-functional teams Geographic re-assignments Quality Management and Continuous Improvement



Qualifications:

3+ year experience in 3D Modeling and detailing using Solidworks 2016.

BS or higher in Mechanical Engineering or equivalent

Exposure to the Update industry is highly preferred Understanding of Programming Logic required, to create macros and sub-routines

Experience with project management preferred- required to actively manage tasks Proficiency with MS Office, particularly MS Excel required
 
Job Number: 002
Job Location: Alvarado, TX
Rate: Open
Per Diem: Yes
Overtime: Yes
Duration: LT
Start Date: ASAP
Input Date: 03/02/2018
Firm Name: QUEST GLOBAL SERVICES
Attention: Akshay Adya
Address: 111 FOUNDERS PLAZA STE 1700
City, State: EAST HARTFORD, CT 06108
Phone: 860/726-7025
Website: www.quest-global.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer

Description:
No Active Clearance Required

- GD & T - 5+ years circuit board / electronics design and drafting
- 3+ years Creo - 10+ years design and drafting
- Strong understanding of mechanical engineering principles, materials, mechanics and heat transfer
 
Job Number: 2728
Job Location: VA
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 02/26/2018
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer **Must Have Commerical Aircraft Seat Experience**

Description:
Summary
This position is responsible for supporting Lead Engineers and/or senior level Engineers in the research, design and substantiation of the mechanical / payloads / systems and structures design within the Mechanical Engineering department utilizing established modeling and design standards. The Engineer 4 will support design and development of engineering packages based on customer and OEM requirements for production, retrofit applications and product development.
Essential Duties and Responsibilities include the following with other duties as assigned:
 Assigned design tasks include but not limited to: aircraft mechanical design, mechanical/structural/payloads/systems installations, detailed assemblies and mechanical/structural/payloads/systems specifications.
 Maintains or modifies mechanical/structural/payloads/systems based on defined requirements using approved processes and tools.
 Participates in teams to support the development of designs. Supports the documentation of design implementation.
 Obtain, interpret, and analyze OEM airplane install drawings using approved processes and tools.
 Provides technical, design and informational support for airplane modifications (including full-time on-site modification support and on-call home-team support), manufacturing support and/or in-service issues.
 Troubleshoots basic mechanical/structural/payloads/systems problems.
 Actively support engineering department goals and initiatives.
 Coordinate with other departments as necessary.
 Utilize internal drawing/document standards per customer or regulatory agency requirements.
 Some domestic or international travel may be required.
 Perform engineering design check and sign documents. With periodical technical guidance from mentor and lead.


 Perform engineering design analysis (such as preliminary Stress analysis, Kinematics and Dynamic Analysis), design validation (such as validate analysis models against test data) and task scope (such as work scope validation).
 Perform engineering design/analysis with minimum technical guidance.
 Provide mentoring and performance management input to PE/Functional Manager.
 Perform engineering design approvals (design/approval authority) and task scheduling (such as detailed schedule of a given task per program requirements).
 Perform engineering design analysis and validation (such as engineering development testing, ballistic testing, airplane and component functional test procedure, HALT, HASS, component qualification testing per RTCA/DO-160, etc).

Supervisory Responsibilities
This job may have some supervisory responsibilities when acting in the role of Lead Engineer and as delegated by the Functional Manager.
Qualifications
To perform this job successfully, an individual must be able to perform each essential duty to the established department standards (i.e. meet published metrics). The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
All external hiring is contingent upon the successful completion of a pre-employment drug screen and a criminal background check.
Requirements
Education and/or Experience:
BS degree Mechanical Engineering, Aerospace Engineering or related Engineering field and 6-8 years experience or equivalent working experience (15 years minimum in an aerospace related field).
Moderate travel within the U.S. and abroad may be required to support programs.
The Structures Company is an AA/EOE.
 
Job Number: 103
Job Location: WA
Duration: 9 Months
Start Date: ASAP
Input Date: 03/08/2018
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer - Aircraft Doors

Description:
General Summary:

Design Engineer must have experience aircraft doors. Will be responsible for the conceptual design and production engineering of Aircraft Doors structural and system components. The candidate will be responsible for conceptual layout, detailed design and aircraft production & in-service design and modification.

Duties and Responsibilities:
Generates Engineering Models and Drawings utilizing CATIA V5
Performs trade studies to identify optimal engineering solution
Collaborates with the Integrated Product Team to resolve cross functional issues
Reviews work performed by others and ensure work is to the highest standard
Implements Industry best engineering practices (design for manufacturing, design for reliability and design for maintainability).
Have the ability to understand and apply certification requirements
Implement design solutions optimized for cost and weight
Manages task execution to ensure on-time and on-target completion.
Utilizes drafting and Geometrical Dimensioning & Tolerancing (GD&T) knowledge to optimize part design for cost and functionality
Searches for problem root cause and develop corrective action plans and solutions
Serves as an interface within the Doors Engineering group to ensure effective communication, coordination, and timely completion of project milestones
Leads or participates in design / development reviews with management and internal customers. The candidate must have the ability to deliver technical presentations effectively to a diverse and demanding audience


Qualifications

Education, Work Experience, Certification and/or Licensure:

BS in Mechanical Engineering with 10-15 years directly related experience
OR MS / MBA with 8-13 years of experience
OR 18-23 years directly related experience

Some Travel may be required

Knowledge, Skills and Abilities:
Proficient in use of CATIA Version 5
Advanced knowledge of drafting rules
Advanced knowledge of Geometrical Dimensioning and Tolerancing
Proficient in Microsoft Office Products
Use of Team Center
Familiar with FAR Part 23 or Part 25
Functional knowledge of SAP


The Structures Company is an AA/EOE.
 
Job Number: 127
Job Location: NC
Duration: 9+ Month
Start Date: ASAP
Input Date: 02/26/2018
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer - Completions

Description:
UNIQUE SKILLS
This is a Design Engineer position in Structural/Mechanical Engineering for Completions Engineering. Responsibilities primarily involve engineering design, modeling, and drafting of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft. Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, entertainment equipment installations, and seating installations. The design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation. Engineering design work includes the creation of drawings/models using either AutoCAD or CATIA V5. Design engineer will employ design standards consistent with company standards and accepted design methods. Engineer will be required to liaison with the shop on engineering issues. Design assignments are executed under the direction of a Lead engineer or Group Head to meet the manufacturing schedule. Additional responsibilities are out lined in the job description and as assigned by the Lead or Structural/Mechanical Engineering Group Head.
 
Job Number: 18-809-123381
Job Location: Northcentral
Rate: OPEN
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 02/28/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer - Level 3 / Level 4

Description:
Location: Rancho Cordova, CA
Rate: $40.00 - $60.00/HR (DOE)
Duration: 6 month contract
Shift: 9/80 schedule. OT possible.


** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


Duties:
** Candidates must have significant experience with Creo & GD&T. Windchill experience strongly preferred **
** Bachelors degree is required **
Design Engineer - Must be able to create or modify designs of liquid rocket propulsion hardware associated to high pressure and high temperature static structures, combustion systems and high pressure valve systems.
- Responsible for designing, developing and testing products including providing project time and cost estimate, product manufacturing and evaluation product for quality safety and cost.
- Applies research to the planning design, development and testing of rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware.
- Applies theories of heat and energy transfer to create practical solutions to technical problems
- Responsible for damage tolerance, durability, design modeling, coordination with analysis disciplines.
- Majority of work will be to develop and maintain component and assembly layouts, designs/CAD models, and drawings using Creo2 graphics system for liquid engine hardware.

Activities: conceptual design creation, design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, synthesis of higher level requirements to component level requirements. Conduct trade studies and develop schedules, test plans, component specifications and procedures.


Skills:
Candidates must have significant experience with Creo & GD&T. Higher level certifications are preferred.
- Winchill experience strongly preferred.
- Mechanical Design and development Engineers research, develop, analyze, design, and support fabrication of components using engineering and scientific principles.
- Engineers are also required to analyze and verify product design and performance for adequacy and reliability.
- Support or lead investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards and/or safety initiative activities.
- Must be able to interface well with other members of project or program team, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
- Must be able to prepare and make presentations at both internal and customer design reviews.

Education:
-BS degree in an Engineering field or equivalent. MS degree is desired.
-10 years minimum of related experience as technical Design Engineer in rocket propulsion hardware or equivalent, and 10 years minimum of related experience as technical Designer using ProE/Creo CAD systems.
-Knowledge in the design of high pressure cryogenic, ambient and high temperature rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware is preferred.
 
Job Number: 8713
Job Location: Rancho Cordova, CA
Rate: $40.00 - $60.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 03/05/2018
Last Updated: 04/13/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer - Level 3 / Level 4 CREO Windchill CA

Description:
161673/7703310
Job Title: Design Engineer - Level 3 / Level 4

Number of Positions: 2

Remaining Positions: 2

Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **





** Candidates must have significant experience with Creo & GD&T. Windchill experience strongly preferred **



** Bachelors degree is required **



Design Engineer - Must be able to create or modify designs of liquid rocket propulsion hardware associated to high pressure and high temperature static structures, combustion systems and high pressure valve systems.



• Responsible for designing, developing and testing products including providing project time and cost estimate, product manufacturing and evaluation product for quality safety and cost.

• Applies research to the planning design, development and testing of rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware.

• Applies theories of heat and energy transfer to create practical solutions to technical problems

• Responsible for damage tolerance, durability, design modeling, coordination with analysis disciplines.

• Majority of work will be to develop and maintain component and assembly layouts, designs/CAD models, and drawings using Creo2 graphics system for liquid engine hardware.



Activities: conceptual design creation, design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, synthesis of higher level requirements to component level requirements. Conduct trade studies and develop schedules, test plans, component specifications and procedures.



Skills:
Candidates must have significant experience with Creo & GD&T. Higher level certifications are preferred.



• Windchill experience strongly preferred.

• Mechanical Design and development Engineers research, develop, analyze, design, and support fabrication of components using engineering and scientific principles.

• Engineers are also required to analyze and verify product design and performance for adequacy and reliability.

• Support or lead investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards and/or safety initiative activities.

• Must be able to interface well with other members of project or program team, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.

• Must be able to prepare and make presentations at both internal and customer design reviews.

Education:
-BS degree in an Engineering field or equivalent. MS degree is desired.



-10 years minimum of related experience as technical Design Engineer in rocket propulsion hardware or equivalent, and 10 years minimum of related experience as technical Designer using ProE/Creo CAD systems.



-Knowledge in the design of high pressure cryogenic, ambient and high temperature rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware is preferred.


Skills:
Required
CREOGEOMETRIC DIMENSIONINGGEOMETRIC TOLERANCINGAEROSPACE DESIGN
Additional
WINDCHILL


State/Province: California
City/Town: Rancho Cordova

Start Date: 03/19/2018 Hours Per Week: 40.00
Est. End Date: 09/30/2018 Hours Per Day: 8.00
Schedule Notes: 9/80 schedule. OT possible. Days Per Week: 5.00
 
Job Number: MB-7703310
Job Location: Rancho Cordova, CA
Rate: 60/hr max
Per Diem: no
Duration: 6 months
Input Date: 04/19/2018
Last Updated: 04/24/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer - Level 4

Description:
Location: Canoga Park, CA
Rate: $50.00 - $60.00/HR
Duration: 6 month contract


** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


Duties:
** Candidates must have significant experience with Creo and GD&T (Geometric Dimensioning & Tolerencing). Windchill experience strongly preferred.

** 10 years minimum of related experience as technical Design Engineer in rocket propulsion hardware or equivalent, and 10 years minimum of related experience as technical Designer using ProE/Creo CAD systems **

** Knowledge in the design of high pressure cryogenic, ambient and high temperature rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware is preferred **

Design Engineer - Must be able to create or modify designs of liquid rocket propulsion hardware associated to high pressure and high temperature static structures, combustion systems and high pressure valve systems.

- Responsible for designing, developing and testing products including providing project time and cost estimate, product manufacturing and evaluation product for quality safety and cost.
- Applies research to the planning design, development and testing of rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware.
- Applies theories of heat and energy transfer to create practical solutions to technical problems
- Responsible for damage tolerance, durability, design modeling, coordination with analysis disciplines.
- Majority of work will be to develop and maintain component and assembly layouts, designs/CAD models, and drawings using Creo2 graphics system for liquid engine hardware.

Activities: conceptual design creation, design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, synthesis of higher level requirements to component level requirements. Conduct trade studies and develop schedules, test plans, component specifications and procedures.


Skills:
- Candidates must have significant experience with Creo & GD&T. Higher level certifications are preferred.
- Winchill experience strongly preferred.
- Mechanical Design and development Engineers research, develop, analyze, design, and support fabrication of components using engineering and scientific principles.
- Engineers are also required to analyze and verify product design and performance for adequacy and reliability.
- Support or lead investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards and/or safety initiative activities.
- Must be able to interface well with other members of project or program team, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
- Must be able to prepare and make presentations at both internal and customer design reviews.


Education:
- BS degree in an Engineering field or equivalent field. MS degree is desired.
 
Job Number: 8574
Job Location: Canoga Park, CA
Rate: $50.00 - $60.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Input Date: 03/12/2018
Last Updated: 06/26/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer - Level 4 / Bachelors degree is REQUIRED / GD&T / 10 years Design Engineer in rocket propulsion hardware and 10 years Designer using ProE / Creo URGENT CA

Description:
161251/7561968
(8122965)

Job Title: Design Engineer - Level 4

Number of Positions: 3

UPDATE 3-5-18: Manager is requesting candidates with really strong GD&T (Geometric Dimensioning and Tolerencing) experience. Please provide summaries of GD&T experience on your resume.


Must have a Bachelors degree. It is a requirement for this group.


Duties:




** Candidates must have significant experience with Creo and GD&T (Geometric Dimensioning & Tolerencing). Windchill experience strongly preferred.



** 10 years minimum of related experience as technical Design Engineer in rocket propulsion hardware or equivalent, and 10 years minimum of related experience as technical Designer using ProE/Creo CAD systems **



** Knowledge in the design of high pressure cryogenic, ambient and high temperature rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware is preferred **





Design Engineer - Must be able to create or modify designs of liquid rocket propulsion hardware associated to high pressure and high temperature static structures, combustion systems and high pressure valve systems.

Responsible for designing, developing and testing products including providing project time and cost estimate, product manufacturing and evaluation product for quality safety and cost.
Applies research to the planning design, development and testing of rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware.
Applies theories of heat and energy transfer to create practical solutions to technical problems
Responsible for damage tolerance, durability, design modeling, coordination with analysis disciplines.
Majority of work will be to develop and maintain component and assembly layouts, designs/CAD models, and drawings using Creo2 graphics system for liquid engine hardware.
Activities: conceptual design creation, design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, synthesis of higher level requirements to component level requirements. Conduct trade studies and develop schedules, test plans, component specifications and procedures.



Skills:
Candidates must have significant experience with Creo & GD&T. Higher level certifications are preferred.
Winchill experience strongly preferred.
Mechanical Design and development Engineers research, develop, analyze, design, and support fabrication of components using engineering and scientific principles.
Engineers are also required to analyze and verify product design and performance for adequacy and reliability.
Support or lead investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards and/or safety initiative activities.
Must be able to interface well with other members of project or program team, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
Must be able to prepare and make presentations at both internal and customer design reviews.
Education:
BS degree in an Engineering field or equivalent field. MS degree is desired.

Skills:
Required
AEROSPACE DESIGNCREOGEOMETRIC DIMENSIONINGGEOMETRIC TOLERANCINGWINDCHILL

State/Province: California
City/Town: Canoga Park

Start Date: 02/12/2018 Hours Per Week: 40.00
Est. End Date: 09/30/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-A7561968
Job Location: Canoga Park, CA
Rate: 60/hr max
Per Diem: no
Duration: 7 month contract
Input Date: 07/24/2018
Last Updated: 08/06/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Drafters/CAD technician

Description:
Essential Job Functions:

QuEST Global Outsourcing is in search of a Design Engineer for Sensors and Integrated Systems.

· Detailed working knowledge of historical and current ASME drafting practices.

· Working knowledge of Pro-Engineer Wildfire 4 and PDF editing

· Familiarity with data configuration management systems and tools such as Teamcenter are preferred.

· A working knowledge of mechanical assembly is required.



Secondary Job Functions:

At QuEST, we often challenge our team members to temporarily work outside the scope of their primary job functions to broaden their skills and help the organization. Some of these roles, tasks, and opportunities include:

· Execution within multiple services

· Project Management: Execution and Support

· Technical Leadership and Technical Reviews

· Develop work instructions to ensure repeatability

· Personnel Management

· Onboarding and Professional Development: collaborate and mentor QuEST Team Members

· Cross-functional teams

· Quality Management and Continuous Improvement



Specialized Knowledge / Skills

· Compliance with all applicable export and ITAR regulations.

· US citizen or US Person cleared to work on an ITAR programs.

· At least 10 years mechanical design and drafting experience


Education, Training, and Experience

· At least 10 years mechanical design and drafting experience

· Detailed working knowledge of historical and current ASME drafting practices.

· Working knowledge of Pro-Engineer Wildfire 4 and PDF editing

· Familiarity with data configuration management systems and tools such as Teamcenter are preferred.

· A working knowledge of mechanical assembly is required.



Personal Work Attributes

· Self-motivated to ensure accountability, disciplined to improve processes, passionate about engineering, and organized to track many work streams

· Excellent verbal and written communication skills to be able to communicate effectively with numerous personality types and superb customer-facing skills

· Great interpersonal and networking skills



Physical Requirements & Work Environment:

· Mostly Office Environments. Occasional Shop Floor involvement

· Substantial amounts of telephone and computer work.

· Heavily Regulated Industries with strict adherence to procedures.

· Flexibility to meet business deadlines by staying late or arriving early.

· Typical 8 hour days plus lunch / 40 hour weeks

· Ability to use personal transportation to visit customer locations.



The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.



Location: Vergennes, VT

Travel: Minimal
 
Job Number: DCT-3
Job Location: Vergennes, VT
Input Date: 03/02/2018
Firm Name: QUEST GLOBAL SERVICES
Attention: Venkatesh Rao
Address: 111 FOUNDERS PLAZA STE 1700
City, State: EAST HARTFORD, CT 06108
Phone: 860/726-7025
Website: www.quest-global.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Drafting/CAD Technician

Description:
Non-Exempt Position



Working Hours: Monday - Friday 8am-5pm

OT: On a case by case basis



Summary:


  • Encompasses the use of integrated systems for computer-aided design used for the systematic representation and dimensional specification of mechanical and architectural structures.

  • Prepares drawings or schematics for mechanical, electrical, or electronic systems, equipment and structures.

  • Utilizes CAD digitizing techniques and skills.

  • Digitizes and edits integrated circuit drawings consisting of components and/or assemblies.

  • Makes engineering computations and prepares and revises specifications.




Requirements:


  • Considerable technical and content knowledge of the job. Understands practical applications, able to solve complex problems, full mastery of regular situations encountered.

  • Independently able to solve the vast majority of problems and ambiguities by examine pertinent facts and evidence.

  • Seeks direction for issues that cross functional areas and/or have broad impacts.

  • Works under limited site supervision.

  • Coordinates other activities beyond routine tasks.

  • Recommends process improvements, meets or exceeds deadlines, and able to maintain confidentiality and ensure compliance.

  • Contacts outside of immediate work group are frequent and broad.

  • May or may not have external contacts.

  • Contacts may be sensitive in nature.




Education:

AAS ina technical field is Required



Experience: 7+ Years



PPE: Standard will be provided.



Manager Must Haves:

- Solid Works

- Ability to read, interpret and correct drawings and schematics



Recent Mechanical Engineering/Technology graduates with 4 years degrees with 0-5 years experience will also be considered.

Supervising Construction or Production experience is a plus

 
Job Number: 18-05188
Job Location: Corning, NY
Rate: 0.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2018-09-11 00:00:00.0
Start Date: 2018-03-12 00:00:00.0
Input Date: 02/06/2018
Last Updated: 04/12/2018
Firm Name: NESCO RESOURCE
Attention: Anthony Kees
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
EE Technical Designer 3

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

EE Technical Designer 3
(U.S. Citizenship Required*)
Berkeley, MO
2018-5540

Responsibilities:
• Develop, maintain and release electrical/mechanical drawings, systems designs or engineering documentation and data by applying company, industry and governmental standards.
• Electronic/electrical component packaging, fixture/test station design, including the electronic/electrical/mechanical design process from detailed parts to complex mechanical assemblies, by selecting components, preparing design layouts, modifying existing designs and resolving complex design discrepancies to satisfy both customers and producibility requirements.
• Work closely with electrical engineering groups throughout all design phases and the fabrication teams during the build process.
• Using design tools, prepare documentation and incorporate design changes.
• Create, develop, and maintain systems designs by preparing design layouts, modifying existing designs and assisting in identifying design discrepancies.
• Support engineering system design and functionality validation activities.
• Develops and maintains product installation designs and part designs ranging from simple to moderately complex.
• Coordinate activities and products with internal partners and external suppliers.
• Work under general direction.

Qualification:
• Required – able to obtain Confidential security clearance
• Required – advanced skills in CAD/CAM
• Working knowledge of 3-D solid modeling
• Experience creating drawings using Computer Aided Draft systems, specifically Unigraphics NX8
• Meet International Traffic in Arms Regulation (ITAR) requirements to work on government contracts
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• AA degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience; or, 10+ years of experience in mechanical design, including mechanisms, structures and/or electronic packaging.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2018-5540
Job Location: Berkeley, MO
Duration: 10 Months
Input Date: 03/01/2018
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: jobs@moseleytechnical.com
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
EE Technical Designer 4

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

EE Technical Designer 4
(U.S. Citizenship Required*)
Ridley Park, PA
2018-5500

Wire Installation technical designer to support Philadelphia Engineering Electrical Design team on various design, integration and release of wire bundles, harnesses and installation drawings.

Responsibilities:
• Lead, develop, maintain and release electrical/mechanical drawings, systems designs or engineering documentation and data by applying company, industry and governmental standards for multiple customers.
• Manage, interpret and develop design requirements.
• Use design tools to document and maintain configuration design control.
• Manage, create, develop and maintain complex systems designs by preparing design layouts, modifying existing designs and integrating systems elements.
• Validate complex engineering system design and functionality.
• Lead process for product installation designs and part designs ranging from simple to complex.
• Coordinate activities and products with cross-functional groups, internal partners and external suppliers.
• Review and assign work to others. Work under minimal direction.

Qualification:
• Required – Advanced technical skill in CATIA V5 and ENOVIA

*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• AA degree in related discipline and typically 6 or more years of related experience or an equivalent combination of education and experience.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2018-5500
Job Location: Ridley Park, PA
Duration: 12 Months
Input Date: 02/26/2018
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Theo Hawthorne
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
EO/IR Video Correction and Enhancement Algorithms-Staff Systems Engineer

Description:
*Data driven algorithm development to optimize performance given sensing/processing constraints
*Working with interdisciplinary team consisting of systems, software, firmware, and electrical
*Working with test engineering team with EO/IR sensor characterization
*Excellent planning, management and communication skills
*Ability to provide technical direction and generate material for proposals
*Ability to contribute to corporate roadmaps including EO/IR and embedded processing technology
*Work independently and create technical direction for the overall organization

Qualifications:
*Bachelor's Degree in Aeronautical, Electrical, Electronic, Mechanical, Software, or Systems Engineering, Mathematics, or Computer Science
*10+ years functional experience required
*Must be able to obtain a security clearance
*Design and development of algorithm development, including but not limited to:
-Detailed knowledge of Matlab/Simulink tools (includes embedded coder and HDL coder)
-Detailed knowledge of IR/EO systems including generation/use of characterization data
-Detailed knowledge of optimizing algorithms for FPGAs (creation of streaming model)
-Detailed knowledge of data analytics, including collection, parsing, and processing
*Knowledge of EO/IR systems modeling and characterization is preferred
*Master's Degree preferred
*Knowledge of model based design is preferred

Benefits: Visit http://www.teamglobal.com/benefits.html for more details.
 
Job Number: 127389
Job Location: Fort Worth, TX
Start Date: ASAP
Input Date: 02/23/2018
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: GCP Recruiter
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design Engineer

Description:
The primary design work will be in the areas of analog, digital, and power conversion circuitry used in commercial and military aerospace products.


You will interact with key colleagues and stakeholders in multiple disciplines and functions, including board design, hardware design, systems engineering, software development, program and project management, etc.


In addition you will :
• Design for safety, testability, and manufacturability
• Define Hardware architecture
• Select electrical components for rugged environments
• Schematic capture
• PCB area estimation, power dissipation, component stress
• Troubleshoot analog and digital circuits
• Perform and document root cause analysis
• Design Failure Mode Effect Analysis (DFMEA)
• Perform Circuit Worst Case Analysis
• Perform Electrical simulation
• Perform Design to cost analysis
• Support PCB design with EMC and manufacturability guidelines
• Support mechanical design, software, test engineering, and manufacturing
• Support qualification and acceptance testing
• Support lifetime testing, EMC, electrical pulses, ESD
• Sensor interface design (tachometers, accelerometers, synchros, etc.)
• Design for rugged, safety-critical environments

Role Summary/Purpose :

As Lead Engineer, Electronic Hardware Design for GE Aviation's well-established and highly successful global Avionics & Airborne Electronics business, you'll provide technical expertise to support development of embedded Avionics products, project execution and design support.

This is soup-to-nuts development of new state-of-the art aircraft components.
Qualifications/Requirements :
• BS Electronic Engineering or Electrical Engineering from an accredited university or college
• 2 years of experience designing analog and digital hardware for airborne or automotive applications
• 5 years of Engineering experience

ELIGIBILITY REQUIREMENT :
• This role is restricted to U.S. persons (i.e., U.S. citizens, permanent residents, and other protected individuals under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3)) due to access to export-controlled technology. GE will require proof of status prior to employment
Desired Characteristics :
• Understanding of analog, digital, and power theory
• Familiarity with Electronics Lab test equipment, and test methods
• Capable of developing and writing specifications in an engineering environment
• Expertise with PSPICE CAD design tools
• Familiarity with design, test and analysis tools and systems
• Development to DO-254 and DO-160 standards
• FPGA design experience
• DC to DC converters design experience
• Strong oral and written communication skills
• Strong interpersonal and leadership skills
• Ability to influence others and lead small teams
• Lead initiatives of moderate scope and impact
• Ability to coordinate several projects simultaneously
• Effective problem identification and solution skills
• Proven analytical and organizational ability
 
Job Number: 7671
Job Location: Pinellas Park, FL
Rate: Open
Per Diem: Split
Overtime: Yes
Duration: 12 months
Start Date: 2 weeks
Input Date: 03/08/2018
Firm Name: BENTLEY GLOBAL RESOURCES LLC
Attention: Johnathon Williams
Address: 3937 TAMPA RD STE 3
City, State: OLDSMAR, FL 34677-3115
Phone: 813/854-1500
Fax Phone: 813/854-1605
Website: www.bentleygr.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design Engineer

Description:
Electrical design, integration, test and production support of simulation equipment. Responsibilities include development of system-level drawings, cable drawings and wire lists.

Must have an Active Secret Security Clearance.
•Bachelor’s degree in Electrical Engineering or equivalent experience in an engineering discipline
•Prefer 4+ years of directly related experience
•Cable harness design experience
•Experience with electro-mechanical devices such as switches, relays, servos and solenoids
•Analog and digital circuit design experience
•Experience using CAD tools and Microsoft Office products
•Must have strong verbal and written communication skills with the ability to communicate complex issues to technical and non-technical audiences that include peers, management, and customers
•Ability to develop innovative solutions both individually and as part of a team
•Close attention to detail with a track record of producing designs that are right the first time

Desired Qualifications
•Experience using AutoCAD
•Familiarity with aircraft cockpit systems
•Experience using Programmable Logic Controllers
•Simulation equipment experience
•Circuit board layout experience
 
Job Number: 127187
Job Location: Broken Arrow, OK
Per Diem: No
Overtime: No
Duration: 6 months
Start Date: 03/19/2018
Input Date: 03/14/2018
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: David Dodson
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design Engineer

Description:
May be considered a specialist in a specific hardware area or generalist in multiple hardware areas and recognized in their organization. Significant domain knowledge of products and systems in assigned area. Plan, analyze, design, test and document hardware of high complexity and contribute to system integration. Understand, utilize, and improve internal processes and tools for the development of hardware. Decisions may have significant impact on cost, schedule, and technical performance. Act as a mentor to more junior engineers in additional areas including project planning and execution. Generate engineering estimates on complex hardware designs. Estimate, track, and report project costs and schedules. May lead cross-functional / domain teams in a Project Engineering role. Provide input to technical & product roadmaps. Bachelor's Degree in applicable engineering or science field or six years related exempt experience plus six years related exempt experience. Analysis - Demonstrates the ability to provide a logical, in-depth analysis of a problem or situation. Cooperation - Takes personal initiative to proactively serve as team motivator creating strong morale and synergy. Dependability - Ensures that all details of a project are accurate before delegating to others. Drive - Displays energy, persistence, and a positive attitude when working on most projects. Judgment - Bases decisions on factual information and considers alternative courses of action before reaching decisions. Listening - Consistently practices attentive and active listening and can accurately restate the opinions of others. Relationships - Develops relationships with others that are based on trust. Writing - Produces reports and proposals that are clearly and concisely written.

Job Specific/Job Description Additions:
- Design interfaces that link groupings of individual COTS products into integrated systems
- Produce System Block Diagrams and Schematics
- Design and produce documentation to build cable per company standard
- Design electro-mechanical interconnect assemblies
- Create engineering specifications and interface with third-party vendors
- Provide monthly cost and schedule status to a Cost Account Manager
- Relationships - Able to interface well with multiple engineering and operations disciplines on a daily basis.
- Agility - Can easily change focus between high level system concepts and low level design details.

Skills/Experience:
REQUIRED: Experienced with AutoCAD 2011 + to create schematics and cable assembly drawings.
REQUIRED: Experience with utilizing MS Office Applications.
REQUIRED: U.S. Citizen

PREFERRED: Training Simulator Design Experience
PREFEERED: Working Military Contract Experience
PREFEERED: Lotus Notes experience

?Product Information:
??Product developed in Binghamton: Design and develop Operational Flight and Maintenance Training Simulators for the Military, in Binghamton we focus on Ground and Rotary Wing simulators.
 
Job Number: 13705
Job Location: Binghamton, NY
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 months
Start Date: ASAP
Input Date: 02/27/2018
Last Updated: 03/09/2018
Firm Name: BENTLEY GLOBAL RESOURCES LLC
Attention: Johnathon Williams
Address: 3937 TAMPA RD STE 3
City, State: OLDSMAR, FL 34677-3115
Phone: 813/854-1500
Fax Phone: 813/854-1605
Website: www.bentleygr.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Level 3

Description:
Location: Centennial, CO
Rate: DOE
Duration: 1 year contract
Overtime: Exempt

****MUST be a U.S. Citizen****

Job Description:
- Main task will be to provide technical system and design support to existing electrical ground command and control systems.
- Develop design solutions typically involve Commercial-Off-The-Shelf (COTS) hardware implementation for command, control, communications and instrumentation systems, as well as stand-alone Test Equipment systems.
- Duties include analysis, implementation and hands-on test of hardware in the Denver laboratories and sites located in Florida, Alabama and California.
- Tasks can vary from equipment rack level design to development of future hardware and system upgrades at chassis or board level.
- Many of our tasks involve instrumentation activities including interfacing to various types of transducers and design of complex, high-channel count Data Acquisition Systems (DAS).
- Our primary product consists of complex engineering drawings, parts lists, test procedures, etc that result in hardware build, test and installation.
- Additional activities routinely include anomaly resolution, data analysis, improvement/upgrade projects and future hardware trade studies. We interface our Ground Equipment to the Launch Vehicle Avionics and to Mechanical Ground and Fluid Control hardware used to prepare, test and launch rockets.

Job Requirements:
- Support ELC program with engineering design capability.
- Ground system design and troubleshooting experience.

Education:
- Bachelor’s Degree preferred.
- 5+ years of experience.
 
Job Number: 8724
Job Location: Centennial, CO
Rate: DOE
Per Diem: Split Possible
Overtime: Exempt
Duration: 1 yr
Start Date: ASAP
Input Date: 03/08/2018
Last Updated: 04/13/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Electrical Engineer - Level 3

Description:
Location: Centennial, CO
Rate: DOE
Duration: 1 year contract
Overtime: Exempt
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****

Job Description:
- Provide touch labor for the SIL modifications for Vulcan.
- Technician labor for cable build and rack wiring modifications.

Education:
- High School Diploma
- 5+ years of experience
 
Job Number: 8723
Job Location: Centennial, CO
Rate: DOE
Per Diem: Split Possible
Overtime: Exempt
Duration: 1 yr
Start Date: ASAP
Input Date: 08/29/2018
Last Updated: 09/14/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Technical Designers - UGNX

Description:
Responsible for electronic/electrical component packaging, fixture/test station design. This will include the electronic/electrical/mechanical design process from detailed parts to complex mechanical assemblies, by selecting components, preparing design layouts, modifying existing designs and resolving complex design discrepancies to satisfy both customers and producibility requirements. This person will work closely with electrical engineering groups throughout all design phases and the fabrication teams during the build process.

o 10 + years of experience in mechanical design, including mechanisms, structures and/or electronic packaging.
o Working knowledge of 3-D solid modeling
o Experience creating drawings using Computer Aided Draft systems, specifically Unigraphics NX8
 
Job Number: BO-MO-ELE
Job Location: St. Louis, MO
Rate: $51.00
Per Diem: Possible
Overtime: Possible
Duration: 10 Months+
Start Date: ASAP
Input Date: 03/01/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

Electrical Technician

Description:
One year in length
Maximum Hourly pay rate $18.00
Tests and troubleshoots electronic products using standard and specialized test equipment. 

1. Troubleshoots electronic products to sub-assembly and component level utilizing schematics and standard troubleshooting practices and procedures 
2. Sets up test equipment and tests electronic products using established test procedures and schematics
3. Provides technical guidance to assemblers and re-work assemblers 
4. Performs cross functional tasks within fairly similar situations resulting in standardized but not identical outcomes

5. Knowledge of the operation and use of electronic production test equipment and hand assembly tools used in a high tech surface mount & through-hole technology manufacturing and production environment
6. Knowledge of advanced electronic test and troubleshooting techniques to component level.
7. Uses product test and measurement equipment, digital/analog voltmeters, oscilloscopes, hi-pot meters, power supplies, and automatic and standard test equipment, etc.
8. Recommends and/or proposes process improvements 
8. Ensures that all relevant quality information/feedback is provided 
10. Utilizes written or visual instructions involving use of quantitative information from specifications, schematics, graphs, pictures, gages, etc.
11. Provides written and/or oral communications concerning a variety of situations following test, troubleshooting, examinations, etc.
12. Keeps workstation, tools and equipment in a neat and orderly manner 
13. Understands and complies with all Company, safety rules and regulations

Requirements/Knowledge: 

v Education Required:
o Associate degree in Electronics (2 year) or certified program (18 mos.) plus 1 year of experience

v Experience 
o 1-3 years of electronics related experience

v Skill Level Required: 
o Skills required in maintaining close specifications using tools & gages, schematics and a variety of electronic equipment 

o Should have a high level of electrical and mechanical aptitude and analytical skills
o Ability to interpret drawing and specifications
o Basic computer skills
o Knowledge of manufacturing processes and how to effectively troubleshoot problems
o Should possess dexterity skills, good hand & eye coordination 
o Willing and able to take and pass basic electronics test 

Desired Qualifications:

v Past experience in a manufacturing environment
v Past experience in a self-directed teaming environment
v Lean manufacturing knowledge
v Understanding of IPC-A-610 standards
 

 
Job Number: 1710063131
Job Location: Bohemia, NY
Duration: 12 months
Input Date: 01/31/2017
Last Updated: 09/21/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Eric Khassanov
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002G9j8AAC&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Wire Designers - Many Needed

Description:
Develops, maintains and releases electrical/mechanical drawings, systems designs or engineering documentation and data by applying company, industry and governmental standards. Using design tools prepares documentation and incorporates design changes.

Email resumes to: mmccarthy@pdstech.com
 
Job Number: BO-ELE-OK
Job Location: Oklahoma City, OK
Rate: $50.70
Per Diem: Possible
Overtime: Possible
Duration: 9 Months+
Start Date: ASAP
Input Date: 02/14/2018
Last Updated: 02/26/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

Electro Mechanical Assembler

Description:
 
PDS Tech is seeking Assemblers for open positions in Redmond, WA.
Assembles fabricated parts at floor stations. Tests and calibrates parts and mechanisms to meet tolerances and product specifications. Uses hand tools and power tools to assemble units according to product specifications. Specific tools used will be tweezers, vacuum wands and torque drivers. Identifies units that fail tests or tolerance levels and repairs as necessary. Requires a high school diploma or its equivalent. May be required to complete an apprenticeship and/or formal training in area of specialty. May require 0-2 years of experience in the field or in a related area. Has knowledge of commonly-used concepts, practices, and procedures within a particular field. Relies on instructions and pre-established guidelines to perform the functions of the job. Works under immediate supervision, and reports directly to an area Supervisor. Primary job functions do not typically require exercising independent judgment.
***candidates must have computer skills and be familiar of how to use a computer***
Requires a verifiable high school diploma or its equivalent.
Experience working with microscope; working with microscopic components
 Must be comfortable with microscope work
 Soldering skills/experience required
Must be able to us tweezers, vacuum wands and torque drivers.
Must be able to follow direction, documentation and listening to instruction.
Understanding and awareness of chemicals in the work area
 Must have computer skills
Has knowledge of commonly-used concepts, practices, and procedures within a particular field.
Must be comfortable working in a hood and a Clean Room gown all day
This is an opportunity for contract to hire based on individual work performance, attendance/dependability and Honeywell business needs.
 Work Schedule :
2nd Shift 1500-2330 PST  Mon-Fri
3rd  Shift 2230-0700 PST  Mon-Fri
5th  Shift 1830-0700 PST  Fri -Sun
 
Rates: 
•  2nd shift   “    $ 18.00 Hr.
•  3rd shift    “    $ 19.00 Hr.
•  5th shift    “    $ 19.00 Hr

Candidates must be of U.S. Citizenship OR Green Card Holders
 The minimum level of education required for ISC assignments is High School diploma/GED. Suppliers should obtain a copy of the candidates highest level of education (HSD/GED or degree) to avoid delays in onboarding
 
 PDS Tech is seeking Assemblers for open positions in Redmond, WA.
Assembles fabricated parts at floor stations. Tests and calibrates parts and mechanisms to meet tolerances and product specifications. Uses hand tools and power tools to assemble units according to product specifications. Specific tools used will be tweezers, vacuum wands and torque drivers. Identifies units that fail tests or tolerance levels and repairs as necessary. Requires a high school diploma or its equivalent. May be required to complete an apprenticeship and/or formal training in area of specialty. May require 0-2 years of experience in the field or in a related area. Has knowledge of commonly-used concepts, practices, and procedures within a particular field. Relies on instructions and pre-established guidelines to perform the functions of the job. Works under immediate supervision, and reports directly to an area Supervisor. Primary job functions do not typically require exercising independent judgment.
***candidates must have computer skills and be familiar of how to use a computer***
Requires a verifiable high school diploma or its equivalent.
Experience working with microscope; working with microscopic components
 Must be comfortable with microscope work
 Soldering skills/experience required
Must be able to us tweezers, vacuum wands and torque drivers.
Must be able to follow direction, documentation and listening to instruction.
Understanding and awareness of chemicals in the work area
 Must have computer skills
Has knowledge of commonly-used concepts, practices, and procedures within a particular field.
Must be comfortable working in a hood and a Clean Room gown all day
This is an opportunity for contract to hire based on individual work performance, attendance/dependability and Honeywell business needs.
 Work Schedule :
2nd Shift 1500-2330 PST  Mon-Fri
3rd  Shift 2230-0700 PST  Mon-Fri
5th  Shift 1830-0700 PST  Fri -Sun
 
Rates: 
•  2nd shift   “    $ 18.00 Hr.
•  3rd shift    “    $ 19.00 Hr.
•  5th shift    “    $ 19.00 Hr

Candidates must be of U.S. Citizenship OR Green Card Holders
 The minimum level of education required for ISC assignments is High School diploma/GED. Suppliers should obtain a copy of the candidates highest level of education (HSD/GED or degree) to avoid delays in onboarding
 
Job Number: 1710075032
Job Location: Redmond, WA
Duration: 12 months
Input Date: 10/09/2017
Last Updated: 09/21/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: John Blackmore
Address: TIME SQUARE 660 BUILDING
660 SW 39TH ST STE 215

City, State: RENTON, WA 98057
Phone: 206/763-2840
800 Phone: 800/678-8644
Fax Phone: 206/763-3283
Email: cecjseattle@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000023KWVAA2&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electro-Mechanical / Field Service Technician

Description:
* Will be part of a team responsible for a new Retro-Fit Project to update units manufactured over the years.
* Considerable amount of travel would be all over the continental U.S. with some international travel possible
* The Retro-Fit Systems will include some electronic, mechanical, and pneumatic skills.
* IPC-A-610, IPC-A-620 or CIS IPC A J-STD-0001 Certifications (Current or Non-Current) are a plus

Summary

The Electro-Mechanical Technician will join a team that visits various client sites to complete Retro-Fit work on past company units. Upon arriving onsite, you are expected to meet and greet the customer. Once on site an initial inspection and observation of the unit(s) will be conducted and documented using an inspection form; the customer will then signoff on the current state of the unit and give the authorization to complete the work. Kits of material, tools & equipment will be delivered to each locations in advance of each visit. The team will responsible for unpacking and inventorying the kits prior to beginning the retro-fit process. Upon completion of the process a final inspection will be completed / documented and the customer will sign off on the completed work. Lastly, each Retro-Fit Report, including the full scope of work and all signed paperwork / documents, will be organized and submitted to the Production Manager.

Job Description:
> Assemble electrical, electronic and/or electro-mechanical assembles, subassemblies or parts, as instructed in accordance to manufacturing documentation (assembly instructions, process documents, schematic, etc.) into sub-units or complete units; wire electronic components, per manufacturing documentation, into sub-units or complete units
> Responsible for soldering and crimping connectors
> Assembles parts into sub-units or complete units, including sub-assembly, process assembly, inspection, modifications, upgrades and rework; also responsible for testing of all electronic assemblies
> Completes production/quality related documentation & performs work in accordance with quality / engineering standards
> Assembles repairs and fabricates parts by operating mechanical equipment or tools, in conjunction with adhering to proper handling and safety requirements (Cutting and Fabrication).
> Complete any other work related task as directed by supervisor

Job Requirements:
> 5+ years’ experience in manufacturing/production environment with High School Diploma
> Must have Requirements:
o Continuous lifting and moving of equipment. Up to 50 lbs.
o U.S. Citizenship
o Clean back ground for entry to government and military installations
o Clean driving background to rent vehicles
o Current US Passport or ability to obtain a passport
o Ability to drive or fly to location.
o Ability to complete expense reports
o Ability to speak with customers and represent the company
> Must have Electro-Mechanical experience with:
o Soldering (Cup solders)
o Crimping of various terminals (Barrel, Machine, MIL-SPEC, Various ring terminals, RJ 45, BNC)
o Schematic reading and comprehension (Mechanical and Electrical)
o Measuring tools (Calipers, Multi-meters, etc.)
o Hand tools (Wrenches, Screwdrivers, Torque tools, Small power tools)

Mark A Ludwig
Vice President
Global American Staffing
Email: mludwig@globalams.us
Office: (508) 230 – 5030
 
Job Number: 003_2018
Job Location: Elkridge, MD
Rate: DOE
Per Diem: Split Possible
Overtime: Yes
Duration: Long-Term (24+ Months)
Start Date: ASAP
Input Date: 01/23/2018
Last Updated: 04/02/2018
Firm Name: GLOBAL AMERICAN STAFFING
Attention: Mark A Ludwig
Address: 12 HARDING ST STE 204-205
City, State: LAKEVILLE, MA 02347
Phone: 508/230-5030
800 Phone: 800/510-8050
Fax Phone: 508/923-0005
Website: www.globalamericanstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electro-Mechanical Design Engineer

Description:
Location: Orlando, FL
Rate: $50.00 - $55.00/HR
Duration: 6 month contract position
Schedule: 9/80

**Candidates must be U.S. Citizens**

Duties:
- An Electromechanical Design Engineer is responsible for the design, documentation and production floor support of hardware (missile electronics, missile electrical cabling, airborne support equipment, ground support equipment and test sets.
- Additional duties include investigation of discrepant hardware and test anomalies.

Skills:
Required:
- Design experience with electrical cables, test sets, breakout boxes, 19” support equipment rack design
- Proficiency with Creo Parametric 2.0 Cabling and Intralink.
- Proficiency with ASME Y14.5M-1994 and generating detailed engineering drawings.
- Proficiency with reading schematics for electrical cable assemblies in order to define and select connectors, backshells, splices, wiring, etc.
- Basic computer skills and a working knowledge of Microsoft Office products (Word and Excel)
- Compliance to quality and safety policies at all times!
- Must be a US Citizen
- Physical Requirements – This work requires delicate handling, reaching, light lifting and may require a combination of sitting and standing as well as walking between test locations and occasional use of small step-ladders.

Desired:
- Experience with design of flexible and semi-rigid RF cables

Education:
- Must have at minimum a Bachelor of Science degree in an Engineering related discipline.
 
Job Number: 8527
Job Location: Orlando, FL
Rate: $50.00 - $55.00/HR
Per Diem: Per Diem Split Possible
Overtime: Possible
Duration: 6 mos
Input Date: 03/15/2018
Last Updated: 03/29/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Electro-Mechanical Design Engineer

Description:
Electro-Mechanical Design Engineer
PDS is looking for experienced Electro-Mechanical Engineers in the Phoenix area
Duties
Electro-Mechanical Design Engineer  Individual will be responsible for the hardware development for missile, satellite  and / or fire control electronics and general packaging support. Activity will require: 

Cross functional coordination to complete hardware design effort to support hardware integration for the designed weapon system. 

Research, development and design of components, equipment and networks for military applications.

Basic Qualifications

- Must be able to obtain a security clearance 
- Candidate must have a Bachelor’s degree from an accredited college in a related discipline with a minimum 3.0 GPA
- 3D modeling tools (example would be Pro-E/CREO, Catia, Solidworks or similar)

Desired skills

- Working knowledge of harness design and development.
- Working knowledge of printed wiring board and surface mount technologies is desired.
- Exposure to, or experience with, Pro/Cable for harness development and Cadence for PWB design is a plus.
- Working knowledge of military hardware specifications is desired.
- Desired design experience includes chassis, electro-mechanical assembly, electrical cable and/or network design. Able to interpret electrical schematics for harness development a plus.

 

 



 
Job Number: 1710065209
Job Location: Phoenix, AZ
Duration: 12 months
Input Date: 03/14/2017
Last Updated: 09/21/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Terry Brooke
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000021WJmAAM&URLSource=cjhunter

Electro-Mechanical Design Engineer

Description:
Electro-Mechanical Design Engineer
PDS is looking for experienced Electro-Mechanical Engineers in the Los Angeles area
Duties
Electro-Mechanical Design Engineer  Individual will be responsible for the hardware development for missile, satellite  and / or fire control electronics and general packaging support. Activity will require: 

Cross functional coordination to complete hardware design effort to support hardware integration for the designed weapon system. 

Research, development and design of components, equipment and networks for military applications.

Basic Qualifications

- Must be able to obtain a security clearance 
- Candidate must have a Bachelor’s degree from an accredited college in a related discipline with a minimum 3.0 GPA
- 3D modeling tools (example would be Pro-E/CREO, Catia, Solidworks or similar)

Desired skills

- Working knowledge of harness design and development.
- Working knowledge of printed wiring board and surface mount technologies is desired.
- Exposure to, or experience with, Pro/Cable for harness development and Cadence for PWB design is a plus.
- Working knowledge of military hardware specifications is desired.
- Desired design experience includes chassis, electro-mechanical assembly, electrical cable and/or network design. Able to interpret electrical schematics for harness development a plus.

 

 



 
Job Number: 1710065207
Job Location: Los Angeles, CA
Duration: 12 months
Input Date: 03/14/2017
Last Updated: 09/21/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Karla Pelonis
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000021WJcAAM&URLSource=cjhunter

Electro-Mechanical Design Engineer

Description:
Electro-Mechanical Design Engineer
PDS is looking for experienced Electro-Mechanical Engineers in the San Jose area
Duties
Electro-Mechanical Design Engineer  Individual will be responsible for the hardware development for missile, satellite  and / or fire control electronics and general packaging support. Activity will require: 

Cross functional coordination to complete hardware design effort to support hardware integration for the designed weapon system. 

Research, development and design of components, equipment and networks for military applications.

Basic Qualifications

- Must be able to obtain a security clearance 
- Candidate must have a Bachelor’s degree from an accredited college in a related discipline with a minimum 3.0 GPA
- 3D modeling tools (example would be Pro-E/CREO, Catia, Solidworks or similar)

Desired skills

- Working knowledge of harness design and development.
- Working knowledge of printed wiring board and surface mount technologies is desired.
- Exposure to, or experience with, Pro/Cable for harness development and Cadence for PWB design is a plus.
- Working knowledge of military hardware specifications is desired.
- Desired design experience includes chassis, electro-mechanical assembly, electrical cable and/or network design. Able to interpret electrical schematics for harness development a plus.

 

 



 
Job Number: 1710065206
Job Location: San Jose, CA
Duration: 12 months
Input Date: 03/14/2017
Last Updated: 09/21/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Karla Pelonis
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000021WJXAA2&URLSource=cjhunter

Electro-Mechanical Design Engineer

Description:
Electro-Mechanical Design Engineer
PDS is looking for experienced Electro-Mechanical Engineers in the San Diego area
Duties
Electro-Mechanical Design Engineer  Individual will be responsible for the hardware development for missile, satellite  and / or fire control electronics and general packaging support. Activity will require: 

Cross functional coordination to complete hardware design effort to support hardware integration for the designed weapon system. 

Research, development and design of components, equipment and networks for military applications.

Basic Qualifications

- Must be able to obtain a security clearance 
- Candidate must have a Bachelor’s degree from an accredited college in a related discipline with a minimum 3.0 GPA
- 3D modeling tools (example would be Pro-E/CREO, Catia, Solidworks or similar)

Desired skills

- Working knowledge of harness design and development.
- Working knowledge of printed wiring board and surface mount technologies is desired.
- Exposure to, or experience with, Pro/Cable for harness development and Cadence for PWB design is a plus.
- Working knowledge of military hardware specifications is desired.
- Desired design experience includes chassis, electro-mechanical assembly, electrical cable and/or network design. Able to interpret electrical schematics for harness development a plus.

 

 



 
Job Number: 1710065205
Job Location: San Diego, CA
Duration: 12 months
Input Date: 03/14/2017
Last Updated: 09/21/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Karla Pelonis
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000021WJIAA2&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electro-Mechanical Technician

Description:


1st Shift opening (9/80 work schedule) for a Laser /Electro/Optical Technician who will be responsible for optical/laser assembly, alignment, test and calibration, along with data collection and analysis. In addition, performing rework on assemblies and systems in response to non-conformance issues.



Essential Duties And Responsibilities:



  • Optical alignment of Electro/Optical laser based systems for military application.

  • Follow written and verbal directions to setup optical alignment and test equipment

  • Assess test set up and tooling effectiveness with regard to product testing and data collection

  • Assemble/test product on a medium volume production environment and interface with engineers on special tests and qualification testing of new products.


Qualifications & Experience:


  • At least 2 years of experience in the field of military-based electro/optical products.

  • Experience in the assembly and alignment of lasers, of multiple wavelengths.

  • Ability to use a variety of testing, measuring and optical equipment (oscilloscope, autocollimator, photo detectors, microscope alignment tools and etc.)

  • Familiar with standard concepts, laser safety practices, and procedures related to cleanroom environment.

  • Ability to comprehensively document assembly processes for use in the creation of Work Instructions

  • U.S. Citizenship or Permanent Resident Desired Qualifications

  • Experience working in an ITAR environment.

  • High school diploma or GED/Associates Degree or trade school certification in a related technical discipline desired/Associate Degree in Laser/Electro Optical Technology a plus



 
Job Number: 18-09115
Job Location: Bedford, NH
Rate: 20.0USD/Hour
Per Diem: --
Overtime: --
Start Date: 2018-03-12 00:00:00.0
Input Date: 03/06/2018
Last Updated: 04/08/2018
Firm Name: NESCO RESOURCE
Attention: Dan Regan
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electro-Mechanical Technicians (3 Openings)

Description:
One (1) Cable & Harness Specialist / Technician
> 3 – 5+ years extensive experience specialized in cable and harness fabrication / building; someone with heavy Wiring Harness Fabrication (Wire gauges, various types of sheathing, etc) experience.

Two (2) Electro-Mechanical Technicians (
> See “Must have Electro-Mechanical experience with:” below

Job Description:

> Assemble electrical, electronic and/or electro-mechanical assembles, subassemblies or parts, as instructed in accordance to manufacturing documentation (assembly instructions, process documents, schematic, etc.) into sub-units or complete units.
> Wire electronic components, per manufacturing documentation, into sub-units or complete units
> Responsible for soldering and crimping connectors
> Assembles parts into sub-units or complete units, including sub-assembly, process assembly, inspection, modifications, upgrades and rework.
> Completes production/quality related documentation
> Assembles repairs and fabricates parts by operating mechanical equipment or tools, in conjunction with adhering to proper handling and safety requirements (Cutting and Fabrication).
> Performs work in accordance with quality and engineering standards
> Responsible for testing of all electronic assemblies
> Keep work area clean and organized as to present a professional work environment
> Complete any other work related task as directed by supervisor

Job Requirements:

> 5+ years’ experience in manufacturing/production environment with High School Diploma and US Citizenship required
> Must have Electro-Mechanical experience with:
o Soldering (Cup solders)
o Crimping of various terminals (Barrel, Machine, MIL-SPEC, Various ring terminals, RJ 45, BNC)
o Schematic reading and comprehension (Mechanical and Electrical)
o Measuring tools (Calipers, Multi-meters, etc.)
o Hand tools (Wrenches, Screwdrivers, Torque tools, Small power tools)

Preferred Experience:

> Direct experience with Military / Government Contracts within a manufacturing environment
> Preferred Certifications (Current or Non-Current): IPC-A-610, IPC-A-620 or CIS IPC A J-STD-0001
> Experience working in a quality controlled environment

Mark A Ludwig
Vice President
Global American Staffing
Email: mludwig@globalams.us
Office: (508) 230 – 5030 x123
 
Job Number: 039_2017
Job Location: Elkridge, MD
Rate: DOE
Per Diem: Split Possible
Overtime: Yes
Duration: Long-Term
Start Date: ASAP
Input Date: 01/22/2018
Last Updated: 04/02/2018
Firm Name: GLOBAL AMERICAN STAFFING
Attention: Mark A Ludwig
Address: 12 HARDING ST STE 204-205
City, State: LAKEVILLE, MA 02347
Phone: 508/230-5030
800 Phone: 800/510-8050
Fax Phone: 508/923-0005
Website: www.globalamericanstaffing.com

Electronic Troubleshooter

Description:
Tests and troubleshoots electronic products using standard and specialized test equipment. 

1. Troubleshoots electronic products to sub-assembly and component level utilizing schematics and standard troubleshooting practices and procedures 
2. Sets up test equipment and tests electronic products using established test procedures and schematics
3. Provides technical guidance to assemblers and re-work assemblers 
4. Performs cross functional tasks within fairly similar situations resulting in standardized but not identical outcomes

5. Knowledge of the operation and use of electronic production test equipment and hand assembly tools used in a high tech surface mount & through-hole technology manufacturing and production environment
6. Knowledge of advanced electronic test and troubleshooting techniques to component level.
7. Uses product test and measurement equipment, digital/analog voltmeters, oscilloscopes, hi-pot meters, power supplies, and automatic and standard test equipment, etc.
8. Recommends and/or proposes process improvements 
8. Ensures that all relevant quality information/feedback is provided 
10. Utilizes written or visual instructions involving use of quantitative information from specifications, schematics, graphs, pictures, gages, etc.
11. Provides written and/or oral communications concerning a variety of situations following test, troubleshooting, examinations, etc.
12. Keeps workstation, tools and equipment in a neat and orderly manner 
13. Understands and complies with all Company, safety rules and regulations

Requirements/Knowledge: 

v Education Required:
o Associate degree in Electronics (2 year) or certified program (18 mos.) plus 1 year of experience

v Experience 
o 1-3 years of electronics related experience

v Skill Level Required: 
o Skills required in maintaining close specifications using tools & gages, schematics and a variety of electronic equipment 

o Should have a high level of electrical and mechanical aptitude and analytical skills
o Ability to interpret drawing and specifications
o Basic computer skills
o Knowledge of manufacturing processes and how to effectively troubleshoot problems
o Should possess dexterity skills, good hand & eye coordination 
o Willing and able to take and pass basic electronics test 

Desired Qualifications:

v Past experience in a manufacturing environment
v Past experience in a self-directed teaming environment
v Lean manufacturing knowledge
v Understanding of IPC-A-610 standards
 
Tests and troubleshoots electronic products using standard and specialized test equipment. 

1. Troubleshoots electronic products to sub-assembly and component level utilizing schematics and standard troubleshooting practices and procedures 
2. Sets up test equipment and tests electronic products using established test procedures and schematics
3. Provides technical guidance to assemblers and re-work assemblers 
4. Performs cross functional tasks within fairly similar situations resulting in standardized but not identical outcomes

5. Knowledge of the operation and use of electronic production test equipment and hand assembly tools used in a high tech surface mount & through-hole technology manufacturing and production environment
6. Knowledge of advanced electronic test and troubleshooting techniques to component level.
7. Uses product test and measurement equipment, digital/analog voltmeters, oscilloscopes, hi-pot meters, power supplies, and automatic and standard test equipment, etc.
8. Recommends and/or proposes process improvements 
8. Ensures that all relevant quality information/feedback is provided 
10. Utilizes written or visual instructions involving use of quantitative information from specifications, schematics, graphs, pictures, gages, etc.
11. Provides written and/or oral communications concerning a variety of situations following test, troubleshooting, examinations, etc.
12. Keeps workstation, tools and equipment in a neat and orderly manner 
13. Understands and complies with all Company, safety rules and regulations

Requirements/Knowledge: 

v Education Required:
o Associate degree in Electronics (2 year) or certified program (18 mos.) plus 1 year of experience

v Experience 
o 1-3 years of electronics related experience

v Skill Level Required: 
o Skills required in maintaining close specifications using tools & gages, schematics and a variety of electronic equipment 

o Should have a high level of electrical and mechanical aptitude and analytical skills
o Ability to interpret drawing and specifications
o Basic computer skills
o Knowledge of manufacturing processes and how to effectively troubleshoot problems
o Should possess dexterity skills, good hand & eye coordination 
o Willing and able to take and pass basic electronics test 

Desired Qualifications:

v Past experience in a manufacturing environment
v Past experience in a self-directed teaming environment
v Lean manufacturing knowledge
v Understanding of IPC-A-610 standards
 
 
Job Number: 1710066458
Job Location: Bohemia, NY
Duration: 12 months
Input Date: 04/07/2017
Last Updated: 09/21/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Eric Khassanov
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000021ioWAAQ&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronics Hardware Engineer || Electrical Engineer

Description:
Please share updated resume at ravi@iconma.com


Electronics Hardware Engineer||Electrical Engineer

Location: Milwaukee, WI
Position type: W2 Contract

NOTE:LOOKING SOMEONE WITH EXTENSIVE EXPERIENCE IN DESIGNING CIRCUITS TO CONTROL DC BRUSH AND BRUSHLESS MOTORS.

Description:
Principal Duties:
- Participates in the development and/or improvement of new and existing products for design change, cost reductions, warranty improvements, and manufacturability.
- Works with minimal direction to create and develop product concepts, and oversees the development to meet time and budgetary constraints.
- Conducts engineering qualification tests on the product including coordinating with outside agencies to ensure compliance.
- Takes initiative to recommend projects, product improvements or cost reductions.
- Performs tradeoff between implementation, schedule, cost and resource constraints and recommend alternatives.
- Provides technical feedback, input and consultation to other departments in design or implementation activities.
- Utilizes CAD systems as related to job.
- Utilizes software application programs such as Microsoft Office, Mentor Graphics Expedition, etc.
- Handles multiple complex or multi-activity tasks simultaneously. Has effective time management skills so that high priority tasks are completed as planned.
- Other duties as assigned.

Requirements:
- Bachelor Degree in Electrical Engineering or a closely related discipline. Master degree preferred.
- Minimum 5 years, preferred 10 years, of experience in product design or engineering experience. Advanced skills, additional education and exceptional performance may alter this requirement.
- Able to apply fundamental engineering theories, mathematics, mechanics, and physical science concepts to the job.
- Experience with electrical schematic capture, PCB layout, 3D CAD modeling, parts database structures, BOM structures, and engineering change management.
- Preferred experience with Mentor Graphics Expedition, Mentor Graphics Valor, and Windchill/Creo.
- Preferred experience in the fields of electrical (120/230Vac), electronic, mechatronics, and electro-mechanical design.
- Preferred experience designing circuits to control DC brush and brushless motors.
- Preferred experience with EMC design techniques.
- Preferred experience designing for regulatory compliance of UL, CE, and other global standards.
- Knowledge of manufacturing processes and limitations to assure conformance of design and fabrication of product.
- Able to obtain and interpret datasheets for electrical and control components, and determine electrical and mechanical requirements.
- Able to proficiently use the tools or materials required to perform typical assigned duties.
- Demonstrated ability to work in a team environment, good written and oral communications skills, flexibility and adaptability to changing situations.
- Preferred experience interfacing with global manufacturing facilities.
- Ability to work independently, as well as direct the work of others.
- High attention to detail and solid organizational skills.
- Possess a professional appearance and positive work attitude, in accordance with work area and company policies.
 
Job Number: 18-02724
Job Location: Milwaukee,, WI
Input Date: 02/21/2018
Last Updated: 02/23/2018
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/321-3508
800 Phone: 855/686-4768
Website: www.iconma.com

Electronics Technician

Description:
Chipton-Ross is seeking a Electronics Technician in Santa Barbara, CA.

Description
Provides engineering hardware fabrication support, troubleshooting, testing and basic Laboratory operations responsibility. These responsibilities will include fabrication of electronic/electrical chassis' and mechanical rack fabrication using development engineering drawings. Candidate must be capable of working independently, discussing technical issues with customers and working with vendors.

Skill/Experience/Education
Mandatory:
Integrated Circuit Layout Technician. SBF is seeking an experienced integrated circuit technician to help advance the state of the art in infrared and visible imager readout integrated circuits (ROICs). Significant experience with physical layout of mixed signal VLSI CMOS transistor level designs is required. The selected candidate will perform silicon layout of analog and digital submicron transistor level designs in support of advanced infrared cameras and imagers. Designs include ultralow noise analog circuit blocks, low power analog to digital conversion, high speed multi GHz data transmission and serializers. MUST HAVE CMOS integrated circuit layout experience.

Desired:
Schematic capture, design verification and simulation.
 
Job Number: 165226
Job Location: Santa Barbara, CA
Rate: $DOE
Duration: 12 months
Input Date: 09/13/2017
Last Updated: 09/22/2018
Firm Name: CHIPTON ROSS
Attention: Brent Sizemore
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: bsizemore@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer - Data Integrity

Description:
UNIQUE SKILLS
This is a Data Integrity Engineer in Structural/Mechanical Engineering for Completions Engineering. Responsibilities primarily involve reviewing engineering designs of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft. Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, entertainment equipment installations, and seating installations. The Data Integrity Engineer will review design work created using either AutoCAD or CATIA V5 and will ensure design standards are consistent with company standards and accepted design methods. Assignments are executed under the direction of the Structural/Mechanical Engineering Lead engineer or Group Head to meet the manufacturing schedule. Additional responsibilities are out lined in the job description and as assigned. Aircraft completion experience desired. Catia V5 and AutoCAD experience required. SmarTeam experience desired. Strong knowledge of aircraft cabin interior mechanical design including cabinet fabrication, materials and processes is highly desired. Experience as a design engineer creating new data for completions of VIP aircraft is a plus.
 
Job Number: 18-810-122441
Job Location: Northcentral
Rate: OPEN
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 05/25/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer 3

Description:
Engineer 3

Location: Savannah, GA
Pay Rate: $58/hr - $60/hr
Duration: Long Term Contract
Shift: Not specified

Unique Skills:
-The ideal candidate will perform cabin configuration engineering and will have a background in electro-mechanical design and/or integration.
-Understanding of aircraft mechanical component integration along with basic electrical integration and application is highly preferred.
-Position will generate build list configuration and certification strategy for a complete aircraft cabin interior installation.
-Knowledge of business jet cabin interiors is highly desired.

Education and Experience Requirements:
Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Five (5) yrs in specific technical discipline or ten (10) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

Principle Duties and Responsibilities/Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering related field preferred. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 8162
Job Location: Savannah, GA
Rate: 58-60
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 03/07/2018
Last Updated: 03/14/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer Electromechanical - 3 / active secret preferred / CREO / electronic packaging CA

Description:
1631
Engineer Electromechanical - 3 (Job Number: 18002041)

Number of Openings: 1

Location(s): United States-California-Redondo Beach


Shift: 1st Shift

Target Start Date: Mar 19, 2018

Target End Date: Mar 15, 2019

Pay Rate: $58/hr. - $60/hr.

Work Week: 9/80

Location: Redondo Beach, CA

Duration: 1 year

The responsibilities include mechanical design & analysis using computer-aided design (CAD), conducting packaging trades, tolerance and interference analyses, generating drawing packages & associated electronic data, and supporting the fabrication, assembly and test of the hardware.


Basic Qualifications:

•5 Years with Bachelors in Science; 3 Years with Masters; 0 Years with PhD.
•A Bachelor of Science degree in a STEM (Science, Technology, Engineering or Math) discipline
•Electronic packaging, CAD, or mechanical design experience in an aerospace environment
•Demonstrated technical skills with experience supporting a multi-disciplined team
•Experience working with different partners across organizations and programs
•Proficient in performing tolerance and interference analyses
•Experience in generating and releasing product detail and assembly drawings
•Experience with PTC Creo / Intralink software applications



Preferred Qualifications:

•A Master’s Degree in Mechanical or Aerospace Engineering and 4+ years of engineering experience in an aerospace environment
•Experience with electronic packaging / mechanical design for airborne & space applications
•Electronics design development and sustaining experience spanning cradle to grave
•Experience with Enovia PLM software application
•Proficiency with electrical design, electronics manufacturing processes and qualification activities
•Familiarity with research and development of advanced packaging technologies
•Active DoD Secret or Top Secret, and/or SCI clearance
 
Job Number: MB-1631
Job Location: Redondo Beach, CA
Rate: 58-60/hr
Per Diem: no
Duration: 12 month contract
Input Date: 06/12/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Engineer Structural- 5- Secret Clearance

Description:
PDS Tech is seeking a candidate for the Engineer Structural 5 position located in Melbourne, FL.  

Perform static, dynamic, and DaDT structural analyses of metallic airframe structure, mechanical systems, and equipment, by hand and by using the automated methods and procedures approved for the program.
Ensure that 
designs meet program requirements and are the lightest, lowest cost, and highest quality products consistent with schedule and budget objectives.
The analyst may also be expected to derive non-flight applied loads, create, extract and 
distribute internal loads, and perform weight and stiffness optimization. T
ools utilized may include FEMAP, NX,Teamcenter 
and other software applications.

Basic Qualifications:



Bachelor of Science degree (ME/AE/CE) with 14 years of experience in AEROSPACE Structural Analysis.




Preferred Qualifications:



Knowledge of FEMAP and NX CAE. Candidate must be able to collaborate in a team environment, prioritize and adjust tasks to accomplish the project result, prioritize multiple responsibilities and/or accomplishing them simultaneously, and comprehend and analyze complex problems and develop solutions. Candidate must be able to collaborate in a team environment, prioritize and adjust tasks to accomplish the project result, prioritize multiple responsibilities and/or accomplishing them simultaneously, and comprehend and analyze complex problems and develop solutions.

 


 
Job Number: 1710075260
Job Location: Melbourne, FL
Duration: 5 months
Input Date: 10/11/2017
Last Updated: 09/21/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Elisa Petersen
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000023L3MAAU&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Interior Designer

Description:
Engineering Contractor

Location: Savannah, GA
Pay Rate: $54.76/hr - $56/hr
Duration: Long Term W2 Contract
Shift: First

Unique Skills:
-Design Engineer/Mechanical Engineering for Aircraft Cabin Interiors in Final Phase Completions.
-Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft.
-Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations.
-Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis.
-Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
-Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam.
-Design Engineer will be required to liaison with the shop on engineering issues.

Design assignments include but are not limited to:
-Item Installation Analysis
-Similarity Analysis
-Configuration Analysis Design engineer will employ design standards consistent with company standards and accepted design methods executed under the direction of the Mechanical engineering Group Head to meet aircraft delivery schedule.

Education and Experience Requirements:
High school diploma or GED
 
Job Number: 8552
Job Location: Savannah, GA
Rate: 54.76 - 56
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 03/07/2018
Last Updated: 03/21/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Technician

Description:
Engineering Technician - Verily Life Sciences

Location: South San Francisco, CA

Terms: Long Term Contract Employment

Top 3 Daily Responsibilities:

Fabrication of thin plastic lenses.
Mold handling.
Inventory management.
Required Skills:

3 years of hands-on experience in microelectronic or medical device assembly.
Experience working with silicones, epoxies, polyurethanes or other medical plastics.
Attention to detail, proactive, organized and thorough with a desire for continuous improvement.
Must have a high level of hand-eye coordination and manual dexterity to work with small plastic and metal components under microscope.
Ability to utilize basic math skills.
Ability to read, write, and comprehend English.
Able to work in a laboratory environment (standing, sitting, stooping) for long periods.
Bachelor's degree in Material Science, Mechanical Engineering, Electrical Engineering or equivalent practical experience.
Nice to Have Skills:

Prior experience in medical device microassembly, optics, inspection and electronic evaluation.
Experience with microscopy.
Ability to track, document and assess process related quality issues.
Prior experience in a clean room environment.
Excellent written and verbal communication skills as well as ability to communicate effectively with scientist and engineers from a wide range of technical backgrounds.
Attention to detail, proactive, organized and thorough with a desire for continuous improvement.
Overview:

Verily’s Life Sciences custom-designed smart contact lenses aim to push the envelope of electronics, materials, and technology to improve people's lives worldwide.
The Integration Team ensures that these cutting-edge technologies come together to realize devices that are reliable, robust and ultimately meet the needs of wearers worldwide.
In the R&D lab, you will execute and help develop protocols using a variety of microfabrication and microassembly techniques to produce prototypes and meet the needs of the Testing and Validation teams.
You will work closely with Verily Engineers to improve designs, troubleshoot, and scale these processes to meet Verily's standards of quality and reliability.
Our Vision:

We are looking for a passionate and capable Engineering Technician to join our team and to help fabricate next-generation devices.
This is an opportunity to be involved in solving interesting and challenging problems on a very unique project!
As an Engineering Technician, you will assist a team of engineers in a large variety of tasks including device assembly, material preparation, test fixture prototyping, testing and data reporting.
Responsibilities:

Execute and manage parallel process flows involving multiple device builds. Follow SOPs to manufacture prototype devices, and perform tests, analyze data, and assist in drafting SOPs and Test Instructions.
Maintain and stock materials as necessary to support device builds and prototype production.
Detailed inspection and verification of process quality standards including documentation and metrology including use of microscopy and metrology equipment.
Hands on work within a laboratory setting handling sensitive optical and electronic parts and materials.
Has the ability to work in cleanroom microassembly environment by maintaining a clean and safe work environment and keeps equipment fully functioning.
Performing and documenting in-process quality checks on finished product.
Ability to work in cleanroom microassembly environment by maintaining a clean and safe work environment and keep equipment fully functioning.
Maintaining clean room integrity by using proper attire and adherence to clean room environment practices and procedures.
Preparing lot history records where necessary.
Working with engineers and technicians to resolve line issues and suggest improvements.
 
Job Number: 384157
Job Location: South San Francisco, CA
Rate: Open
Per Diem: No
Overtime: Possible
Duration: 13 Mos
Start Date: ASAP
Input Date: 03/26/2018
Firm Name: CDI CORPORATION
Attention: Kris Douglas
Address: 17177 PRESTON RD STE 300
City, State: DALLAS, TX 75248
Website: www.cdicorp.com

Flight Readiness Technician D (4) - CA - C

Description:
Chipton-Ross is seeking 4 Flight Readiness Technician D's located in Palmdale, CA

RESPONSIBILITIES:
Inspector Aircraft, Mechanic Electrical and Electronics, and Mechanic Flight, Individual job duties may include: Perform operational checkout of aircraft prior to and during preflight. Inspect explosive and armament installations. Maintain aircraft historical records. Perform activities prior to flight status and final inspection and daily maintenance of completed experimental aircraft or major modification to experimental aircraft. Inspect and/or perform bench and flight line operational checkout and inspect, trouble-shooting, adjustment and repair of electrical and electronic systems. Inspect the calibration, adjustment, troubleshooting, repair and modification of electronic test equipment used exclusively by production and at times may be required to inspect the calibration, adjustment, trouble-shooting, repair and modification of other electronic test equipment as directed. Perform aircraft and/or spacecraft bench or flight line operational checkout, trouble-shooting, adjustment and repair of any electrical or electronic system. Fabricate, adjust, trouble shoot, repair and modify electronic test equipment. Perform operational checkout of hydraulic systems and mechanical systems. Diagnose and correct hydraulic and mechanical malfunctions. Operate engines during run-ups and troubleshoot when needed. Perform engine buildup as assigned. Install, repair, and replace tanks, power plants, generators, and aircraft engines. Install or replace reservoirs, etc. and repair leaks in same. Install or replace instruments such as fuel quantity, rate of climb and oil pressure indicators. Splice, route, clamp, solder, and string tie wires or wire bundles. Repair, install and hook up bomb, missile and rocket racks and pylons. Install and load ejection seats and guns. Install adjust, repair and replace structural parts and assemblies. Modify parts such as skins, doors, aircraft frames, test panels, clips, brackets, angles and ribs without the aid of jigs and ixtures. Modify aircraft components or aircraft support equipment. Perform composite repairs

ADDITIONAL EXPERIENCE:
Knowledgeable and skilled in F15 mechanical, structural, power plant, hydraulic, pneumatic, and electrical systems operation and flightline methods and common shop practices.
Knowledgeable and able to interpret and work from USAF technical orders (T.O.s), blueprints, sketches and written and verbal instructions.
Knowledgeable and able to use computer systems for office and shop applications.
Knowledgeable about and able to work in FOD controlled environments.
Knowledgeable and able to apply shop math.
Skilled in listening and interpersonal participation, and able to work with others as part of a team which includes giving and receiving feedback, and assisting others in completion of tasks.
Able to complete and maintain all required training and certifications needed to do your job efficiently.
Able to climb, stand, bend, kneel, reach, crawl, and walk on or around aircraft or work stands and in confined spaces.
* F-15 Crew Chief experienced personnel, sound understanding of Air Force Tech Order usage and application. Experienced Flight Line operations, preflight, launch, recovery, and functional checkout of Hydraulics/Avionics/Mission Systems/Weapons loading.
* F-15 Electrical/Avionics experience, sound understanding of Air Force Tech Order usage and application. Versed in Flight Line Operations, Avionics/Electrical preflight and functional checkout of disturbed systems.
* Weapons Load Standardization/Weapons loading: Plans, organizes, participate and directs aircraft armament systems maintenance activities. Establishes and evaluates performance and training standards, maintenance controls, and procedures. Checks methods and techniques used to load and unload munitions on aircraft, to repair and maintain aircraft release and gun systems, and to maintain, repair, and modify associated equipment.


EDUCATION/EXPERIENCE:
This job requires specialized vocational training or an Accredited Associate's degree and 3 to 5 years work
related F15 experience or an equivalent combination of education and experience

VARIABLE SHIFT
WORK HOURS: Candidates need to be available to work 2nd shift, if needed (2nd shift begins at 2:30 PM).

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

 
Job Number: 166698
Job Location: Palmdale, CA
Rate: $DOE
Duration: 12 Months
Input Date: 12/01/2017
Last Updated: 09/22/2018
Firm Name: CHIPTON ROSS
Attention: Brent Sizemore
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: bsizemore@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Hardware Systems Engineer - (DOORS Required)

Description:
Hardware Systems Engineer

Aerospace

Location: Jupiter, Florida

Terms: Long Term Contract



This is a Hardware Systems role, NOT Software systems.

Without appreciable direction and exercising considerable latitude in determining technical objectives and approaches to assignments, performs in a largely independent role for the Systems Engineering organization.

Typical responsibilities include:

May plan, conduct, and provide technical Systems Engineering direction on projects or major phases of significant project assignment, coordinating the efforts of technical support staff in the performance of assigned projects.
Requires the use of advanced Systems Engineering techniques in management of requirements and risk for developing rocket propulsion systems.
Assesses the feasibility and soundness of proposed engineering evaluation tests, products or equipment when necessary data are insufficient or confirmation by testing is advisable.
Represents the organization in conferences to resolve important questions and to plan and coordinate work.
May direct, coordinate and review the work of a small staff of engineers and/or technicians; estimates personnel needs and schedules and assigns work to meet completion date. Or, as individual researcher or staff specialist may be assisted on projects by other engineers or technicians.
Develops solutions to complex problems which require the use of ingenuity and creativity.
Work is reviewed at extended intervals for desired results and achievement.
Contacts include interacting with customer personnel on technical matters often requiring coordinated activity across organizational lines.
60% - Develops hardware and software requirements for rocket propulsion systems product development. Responsible for derivation, allocation, and documentation of requirements in a requirements database. Responsible for the development and maintenance of system, subsystem, and component specifications. Coordinates requirements and related specification change management with IPT members. Defines and coordinates requirements verification plans with integrated product team members, plans and manages compliance assessment and certification.
15% - Performs functional analysis in support of requirements development effort. Supports and/or coordinates system trade studies. Coordinates selection of optimized concept baselines through benefit/cost trades in support of definition of system architecture and objectives.
15% - Coordinates project risk assessment and management and prepares and reports results on mitigation plans.
10% - Communicates results in oral presentations and written communication.
Skills: Required:

DOORS.
DOORS NG.
Jazz Team Server tool knowledge.
Systems requirements management and flowdown/decomposition for subsystems and components.
Education:

BS Engineering
Desired:

Hardware requirements development for complex systems including propellant valves/electro-mechanical actuators.
 
Job Number: 384294
Job Location: Jupiter, FL
Rate: Open
Per Diem: No
Overtime: Possible
Duration: 9 Mos
Start Date: ASAP
Input Date: 03/26/2018
Firm Name: CDI CORPORATION
Attention: Kris Douglas
Address: 17177 PRESTON RD STE 300
City, State: DALLAS, TX 75248
Website: www.cdicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Hardware Systems Engineer IV

Description:
Hardware Systems Engineer IV

Location: Jupiter, FL
Pay Rate: DOE ($55/hr - $68/hr)
Duration: 6 month W2 contract
Shift: Jupiter, FL
**MUST be a U.S. CITIZEN; NO DUAL CITIZENSHIP**

Duties:
** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **
** This is a Hardware Systems role, NOT Software systems **

-Without appreciable direction and exercising considerable latitude in determining technical objectives and approaches to assignments, performs in a largely independent role for the Systems Engineering organization.
-Typical responsibilities include: May plan, conduct, and provide technical Systems Engineering direction on projects or major phases of significant project assignment, coordinating the efforts of technical support staff in the performance of assigned projects.
-Requires the use of advanced Systems Engineering techniques in management of requirements and risk for developing rocket propulsion systems.
-Assesses the feasibility and soundness of proposed engineering evaluation tests, products or -equipment when necessary data are insufficient or confirmation by testing is advisable.
-Represents the organization in conferences to resolve important questions and to plan and coordinate work.
-May direct, coordinate and review the work of a small staff of engineers and/or technicians; estimates personnel needs and schedules and assigns work to meet completion date. Or, as individual researcher or staff specialist may be assisted on projects by other engineers or technicians.
-Develops solutions to complex problems which require the use of ingenuity and creativity.
-Work is reviewed at extended intervals for desired results and achievement.
-Contacts include interacting with customer personnel on technical matters often requiring coordinated activity across organizational lines.

-60% - Develops hardware and software requirements for rocket propulsion systems product development. Responsible for derivation, allocation, and documentation of requirements in a requirements database. Responsible for the development and maintenance of system, subsystem, and component specifications. Coordinates requirements and related specification change management with IPT members. Defines and coordinates requirements verification plans with integrated product team members, plans and manages compliance assessment and certification.

-15% - Performs functional analysis in support of requirements development effort. Supports and/or coordinates system trade studies. Coordinates selection of optimized concept baselines through benefit/cost trades in support of definition of system architecture and objectives.

-15% - Coordinates project risk assessment and management and prepares and reports results on mitigation plans.

-10% - Communicates results in oral presentations and written communication.

Skills Required:
-DOORS
-DOORS NG
-Jazz Team Server tool knowledge
-Systems requirements management and flowdown/decomposition for subsystems and components
-Aerospace experience
-Software Requirements Management

Desired:
-Hardware requirements development for complex systems including propellant valves/electro-mechanical actuators

Keywords:
-DOORS
-Requirements Management
-Requirements Development

Education:
BS Engineering
 
Job Number: 8728
Job Location: Jupiter, FL
Rate: 55-68
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 03/08/2018
Last Updated: 03/21/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Hydraulics and Landing Gear DER

Description:
Position Purpose:
Responsible for the design, research and development of advanced new applications resulting in new product/business for the company.

Unique Skills:
• Current Mechanical Systems Hydraulic DER
• This position will need the following delegations on Chart C1, Systems and Equipment (Mechanical Equipment): B1, B2, B7, F1, F2, F7, G1, G2 and G7.

Education and Experience Requirements:
• Bachelor's Degree in engineering, a related curriculum required or equivalent combination of appropriate education and experience sufficient to successfully perform the essential functions of the job.
• Fifteen (15) + year’s progressively responsible engineering exp in specific tech discipline with Bachelors. Exp credit considered for related adv degrees limited to 2 yrs Masters, 4 yrs PhD in fields applicable to this job. Requires approval of Eng PRB include bus justification.

Principle Duties and Responsibilities:
• Plans R&D programs and recommends technological application programs to meet corporate objectives
• Proactively promotes process initiatives that improve the balance of technical product, cost and schedule
• Applies cutting edge theories and technologies by exhibiting an exceptional degree of ingenuity, creativity and resourcefulness
• Champions and develops innovative principles and ideas
• Often acts independently and exercises wide latitude in determining objectives and approaches to critical assignments
• As a recognized expert in the field, provides consultative services to senior/executive leaders both within the company and the industry Perform other duties as assigned.
• Advanced degree in engineering or related curriculum preferred
• The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 24-229
Job Location: Savannah, GA
Rate: $135.00
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 02/22/2018
Last Updated: 07/20/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
IR/EO Staff Systems Engineer - Digital System Modeling

Description:
*Capturing results in white papers and presenting results to customers (strong technical presence)
*Working with interdisciplinary team consisting of systems, software, firmware, and electrical
*Working with test engineering team with EO/IR sensor characterization
*Ability to create and execute to digital system modeling roadmap including hardware-in-the-loop and integration with embedded processing
*Excellent planning, management and communication skills
*Ability to provide technical direction and generate material for proposals
*Ability to contribute to corporate roadmaps including EO/IR and embedded processing technology
*Analysis of Customer Documentation to create System Level Concepts of Operations (CONOPS), Specifications, and Architectural Design
*Work independently and create technical direction for the overall organization

Qualifications:
*Bachelor's Degree in Aeronautical, Electrical, Electronic, Mechanical, Software or Systems Engineering, or Computer Science
*10+ years functional experience required
*Must be able to obtain a security clearance
*Design and development of Matlab/Simulink modeling, including but not limited to:
-Detailed knowledge of Matlab/Simulink tools (advanced user with 10+ years’ experience)
-Detailed knowledge of IR/EO systems including generation/use of characterization data
-Detailed knowledge of integrating software/firmware source into Matlab/Simulink
-Detailed knowledge of integrating 3rd party tools into Matlab/Simulink
-Detailed knowledge of performance report generation using Matlab/Simulink
*Master's Degree preferred
*Knowledge of algorithms, image processing, software, and firmware is preferred
*Knowledge of model based design is preferred

Benefits: Visit http://www.teamglobal.com/benefits.html for more details.
 
Job Number: 127390
Job Location: Fort Worth, TX
Start Date: ASAP
Input Date: 02/23/2018
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: GCP Recruiter
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Inspector (Mechanical)

Description:
Notes from the Hiring Manager:

<> The Inspector should have experience inspecting cables and mechanical parts within a manufacturing environment , preferably with a mechanical background instead of electrical
<> They will receive multiple parts, which will be a mixture of cables and mechanical parts but vary from day-to-day; they should be able to see the part and know how to proceed with inspection, or at least be able to read the engineering drawings.
<> Experience with inspection tools such as Calipers, Measuring Devices / Equipment, Tape Measure, Feeler Gauge, etc
<> IPC 610 or 620 Certification is a plus


Summary:

To perform checks, tests, gauging, and instrument inspections of materials, goods in process, and finished goods.

Job Description:

> Performs audits, tests & inspections of materials, goods in process or finished goods within value stream (receiving through final system assembly) assuring quality first by determining compliance to drawings, procedures & specifications
> Applies established inspection procedures & uses simple inspection/testing tools and instruments of a “go/no go” nature.
> Develops and/or uses test and inspection set-ups utilizing mechanical and/or electrical test measurement equipment.
> Inspection methods and limits require good judgment and interpretation.
> Requires interpretation of inspection plans, tests and procedures.
> Recommends changes to procedures, processes, and drawings to improve efficiency and/or quality of the product.
> Identifies and documents nonconforming material in accordance with applicable procedures.
> Assists and trains others in assuring the proper test, measurement, and procedural operations.
> Ensure adherences to policies and procedures accordingly.
> Practices Total Quality principles and concepts.
> Acquire IPC-610/STD 001 and IPC-620 Certifications as applicable

Qualifications:

> 1-2 years related experience with a High School diploma preferred
> Knowledge of manufacturing and quality assurance processes and/or procedures.
> Knowledge of military and commercial quality specifications.
> Knowledge of Statistical Process Control.
> Knowledge of digital and analog circuitry.
> Knowledge of electrical and/or mechanical inspection.
> Knowledge of workmanship standards.
> Knowledge of packaging and preservation requirements.
> Understanding of Total Quality principles and concepts.
> Ability to communicate effectively verbally and in writing.
> Ability to use electrical and mechanical inspection equipment.
> Ability to develop and use simple to complex inspection set-ups.
> Basic algebraic skills.
> Ability to read, analyze and interpret detailed specifications, drawings, procedures, and schematics.
> Ability to work effectively within a team environment


Mark A Ludwig
Vice President
Global American Staffing
Email: mludwig@globalams.us
Direct: (508) 434 – 6180
Office: (508) 230 – 5030 x123
 
Job Number: 011_2018
Job Location: Hunt Valley, MD
Rate: DOE
Per Diem: Split Possible
Overtime: Yes / Possible
Duration: 12+ Months
Start Date: ASAP
Input Date: 02/28/2018
Last Updated: 04/02/2018
Firm Name: GLOBAL AMERICAN STAFFING
Attention: Mark A Ludwig
Address: 12 HARDING ST STE 204-205
City, State: LAKEVILLE, MA 02347
Phone: 508/230-5030
800 Phone: 800/510-8050
Fax Phone: 508/923-0005
Website: www.globalamericanstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Instrument Project Engineer - Refinery Exp (TX)

Description:
THIS IS NOT FOR AN INTERN, THIS POSITION REQUIRES AT LEAST 10-15 YEARS OF EXPERIENCE.

Basic Function
An Instrument Project Engineer (IE) is responsible for the design and implementation of process instrumentation from initial conception through field installation. They are responsible for designs that provide the most reliable and cost-effective instrument systems. In addition, the IE provides consulting services to process designers in developing process design specifications, develops operating and training manuals for mechanical and process personnel and participates in training operating personnel.

An IE:
• Writes purchase and construction specifications and writes and performs Factory Acceptance Tests.
• Uses vendor software programs for sizing safety and control valves.
• Specifies, procures, and configures Programmable Logic Controllers (PLC) and field hardware such as transmitters, controllers, pneumatic and electronic transmission system.
• Utilizes standards and best practices from American Petroleum Institute (API) and International Society of Automation (ISA), National Fire Protection Association (NFPA) to perform the above functions.

Responsibilities.
The Instrument and Controls Engineer may be responsible for:
• Function as project engineer on instrumentation and capital projects and large maintenance projects.
• Taking lead role on Instrumentation and controls capital projects including PLCs.
• Help identify areas where instrumentation/controls can improve plant operations and profitability.
• Developing capital and expense budget requirements related to instrumentation system upgrades, PM/PdM programs, repairs, expansions, etc.
• Serving as a technical resource to properly identify new and existing equipment specifications and proper operating parameters/ranges for instrumentation equipment.
• Overseeing application and interpretation of National Electric Code and other applicable city, state, federal codes and standards (e.g. NPRA, NFPA, API, ISA).
• Interact with Engineering and Construction contractors, both on-site and off-site.
• Leverage the application of instrumentation safety standards, mechanical integrity, design and maintenance.
• Using documentation systems and processes that maintain accurate instrumentation information and drawings.
• Support criticality assessments of the plant's instrumentation equipment.
• Design and evaluate Refinery Safety Instrumented Systems (SIS). Perform Safety Integrity Level (SIL) analysis and engineering upgrades of safety instrumented systems.

Basic Required Qualifications.
• Must be legally authorized to work in the United States, at least 18 years of age and possess a valid driver’s license.
• Must possess a bachelor’s degree in Electrical Engineering, Chemical Engineering, Mechanical Engineering, or Industrial Engineering.
• Must have three or more years of instrumentation experience and three or more years of direct experience in a refinery, chemical and/or manufacturing industry.
• Demonstrated knowledge and use of SPI (InTools) database and specifications.
• Proficient in the specification, troubleshooting, maintenance and overhaul of process control values.
• Demonstrated knowledge of PLC's.
• Proficient in MS office (Word, Excel, Outlook, Projects).
• Must be willing and able to perform, comply with the following:
• Wear Nomex fire retardant clothing and personal protective equipment (such as steel-toe shoes, ear, and eye protection).
• Maintain face daily so that a respirator/face mask can seal properly (some examples include being free of facial hair and/or clean shaven), climb up to 200 feet in height and work in enclosed spaces such as tanks and silos

Preferred Qualifications:
• Industry certifications (ISA)

FOSTER DESIGN'S BENEFITS:
• Working for a 54-year old company
• Minimum 10 Paid Holidays with no waiting period
• Immediate 401K participation, 1 year 100% vesting schedule, matching employer contribution
• Free Financial Consultant
• Medical/Dental/Vision/Prescription card – BCBS
• MetLife – Long Term Disability Insurance
• Vacation Pay
• Per Diem Assignment Allowance, when applicable
• Per Diem Split, when applicable
• Paid Weekly (Direct Deposit)
 
Job Number: FD-021618TX
Job Location: Borger, TX
Rate: $BOE/HR
Per Diem: Possible
Overtime: Possible
Duration: 11 Months or linger
Start Date: 03/26/2018
Input Date: 03/08/2018
Last Updated: 03/21/2018
Firm Name: FOSTER DESIGN INC
Attention: Recruiter
Address: 200 W DOUGLAS AVE STE 110
City, State: WICHITA, KS 67202
Phone: 316/832-9700
800 Phone: 800/345-3394
Fax Phone: 316/832-9357
Website: www.fosterdes.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Interior Design Engineer

Description:
General Summary:
The Interior Design Engineer will perform interior design engineering for cabin & cockpit structures, components, and trim for aircraft. The individual will also on occasion support tasks associated with interior Installations.

Duties and Responsibilities:
1. Creates conceptual designs for interiors of the aircraft through 3D modeling software, drawings, and/or drafting application.
2. Develops designs for form/fit/function to meet customer and design criteria.
3. Provides designs for the fabrication process including sheet metal, extrusions and inject molding
4. Validates engineering designs per engineering core principles, design standards, processes and industry best practices.
5. Makes recommendations to engineering lead/management.
6. Researches and maintains up to date knowledge of technical data pertaining to cabin, cockpit structures, hardware, material, and finishes.
7. Ensures adherence to program schedule.
8. Performs other duties as assigned.

Education, Work Experience, Certification and/or Licensure:
1. 3+ years of engineering experience with at least three years of design engineering experience directly related to mechanical/interior design for commercial aircraft.

Knowledge, Skills and Abilities:
1. Working knowledge of conceptual design development of aircraft interiors.
2. Working knowledge of industry standard (i.e. - parts lists, bill of materials, parts and standards callout, etc).
3. In-depth knowledge of Geometric Dimensioning and Tolerancing (GD&T).
4. Familiarity with 14CFR Part 23/25.
5. Proficiency in CATIA V5 workbenches or equivalent 3D modeling tools (i.e. - Solidworks, Unigraphics, etc).
6. Proficiency in Teamcenter (or equivalent PLM tool).
7. Ability to work independently or within a team environment.
8. Ability to communicate effectively throughout all levels within an organization and present data clearly and concisely.
9. Ability to work cross functionally with Quality and Production to resolve issues on the production line.


Physical Requirements:
1. Incumbents may be routinely exposed to equipment operational noise heat-cold-dust, and/or aircraft equipment, parts, or fuel odors.
2. Incumbents may be required to stand, sit, squat, walk, bend, climb ladders, move, reach, or stretch for prolonged time periods with no restrictions, as required by job duties.
3. Work in a safe and professional manner while adhering to all regulatory requirements (FAA, OSHA, DOT, EPA, State, and Federal regulations, etc.).
4. Read, hear, speak, and see with no restrictions, as required by job duties.
5. Comprehend and adhere to management directions and/or safety instructions with no restrictions.
6. Effectively communicate in Business English language.
7. Pull, push, carry, lift, or move items up to 10 lbs. throughout the work shift without assistance, as required by job duties.
8. Pull, push, carry, lift or move materials/people/items/equipment weighing up to 50lbs or more during the work shift, with the use of Company provided “reach assistance technology” or “movement assist technology” (fork-lifts, pallet jacks, pulleys, dolly’s, robotics reach equipment, people movers etc.), as required by job duties.


The Structures Company is an AA/EOE.
 
Job Number: 144
Job Location: Greensboro, NC
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 03/26/2018
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Launch Control Software Development Engineer

Description:
Launch Control Software Development Engineer

Location: Centennial, CO
Pay Rate: DOE
Duration: 6-12 month W2
Schedule: 9/80, exempt OT
**MUST be a U.S. CITIZEN; NO DUAL CITIZENSHIP**


This position is for the Integrated Fluids Systems (IFS) group. IFS performs test and validation of Launch Control Software that defines critical operations during countdown and vehicle test.


Job Function

• Develop systems integration solutions related to automated launch site ground operations
• Perform simulated countdown testing in Systems Integration Lab (SIL)
• Establishes functional and technical requirements for fluids related software, and ensures proper integration with other software and hardware systems and program operational requirements
• Interface with Launch Operations, Propulsion Design, Electrical Ground Support Equipment, Flight Software and Avionics
• Synthesizes all applicable vehicle, ground, and operational requirements into software or operational solutions that acknowledge technical, schedule, and cost constraints
• Develops, documents, tests, and maintains requirements for ground software
• Develops and documents mathematical rationale for software parameters
• Responsible for subsystem and integrated system level software verification by defining comprehensive software test plans and performing software testing in the SIL
• Reviews and performs analysis of applicable SIL and launch site data to ensure proper software functionality


Preferred Qualifications

• A good understanding of fluids and thermodynamic principles, mechanical system design considerations, instrumentation usage, and other technical principles and concepts within the engineering field
• A significant breadth and depth of knowledge in the following systems: airborne pneumatic and propulsion systems, GSE commodities, airborne avionics, GC3 hardware, CCLS ground software
• Working knowledge of Test Requirement Documents (TRDs), hardware and operational limits, the Parameter Signal Measurement (PSM) database, Automated Data Monitoring System (ADMS), Microsoft Word and Microsoft Excel
• Familiar with good software testing practices to validate all nominal and off nominal logic paths, with an understanding of how software applications are structured, and a focus on the system level functionality
• Able to assimilate, master, and recall large amounts of detailed information as it applies to multiple system interfaces and interdependencies it in a variety of areas
• Detail oriented, focused on following through on all related tasks, with methodical and systematic problem solving and troubleshooting skills
• Launch site operations experience is a plus
 
Job Number: 8704
Job Location: Centennial, CO
Rate: DOE
Per Diem: Possible
Overtime: Exempt
Duration: 6-12 mos
Start Date: ASAP
Input Date: 03/01/2018
Last Updated: 03/26/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MP&P Engineer 3

Description:
Please share updated resume at ravi@iconma.com

MP&P Engineer 3

Location: New Orleans, LA
Duration: 1 year

Description:
Defines requirements for materials, parts and processes used in the manufacture of products. Produces specifications and other documents to manage the deployment of materials, parts and processes. Maintains compliance with contractual and regulatory obligations. Promotes standardization across business activities. Evaluates emerging technologies for potential application to business needs. Develops and qualifies new materials, parts and processes to meet requirements. Integrates new technologies as appropriate. Manages test and audit programs to qualify suppliers to applicable requirements. Conducts analysis to determine reasons for failures of materials, parts or processes. Implements corrective and preventive actions. Designs, develops and qualifies computer and production systems to satisfy user requirements. Works under general direction.

Education / Experience:
Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.

Skill Code:
6B5-Mechanical/Structures/Assembly
 
Job Number: 18-01444
Job Location: New Orleans,, LA
Input Date: 02/14/2018
Last Updated: 02/23/2018
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/321-3508
800 Phone: 855/686-4768
Website: www.iconma.com

MP&P Engineer 3 - CA

Description:
Chipton-Ross is seeking a MP&P Engineer 3 located in Huntington Beach, CA

RESPONSIBILITIES:
Parts Manager/Components Engineer - Manage the electrical, electronic, and electro-mechanical (EEE) parts and components including subcontractor oversight of EEE parts and components for the PAC-3 Program. Position requires a strong track record in communication with program management, customers, and subcontractors outside of Client. The position also requires controlling PMP product specifications, subcontractors parts management control plans, and DMSMS part management plans, lead teams in assessing applications, qualifications, evaluate/approve replacement EEE parts and components including qualification of plastic encapsulated microcircuits (PEMs), technology insertion, life cycle cost and parts obsolescence assessments/solutions, developing non-standard parts approval requests (NSPARS) for new part additions and assessing derating exceptions. The parts manager will have authority regarding all technical PMP dispositions. The parts manager is expected to integrate technical, value, safety, and HAZ-MAT considerations of EEE parts and components into product definition to comply with Client, customer, and government requirements. The parts manager will be the prime interface with the customer on parts, materials and process concerns and lead initiatives to improve/develop PMP control processes in the absence of existing procedures for the PAC-3 Program as well as for the Client enterprise PM&P Engineering Function. The parts manager will support with the PAC-3 PMPCB Chairman and work with parts managers/component engineers as well as other members of the PAC-3 Program team to define/implement engineering solutions to meet organization objectives. The parts manager will also work with the PAC-3 reliability, quality, configuration management, and logistics team to implement the PAC-3 Program PMP practices across the program in a cost efficient manner while maintaining contractual standards.

EDUCATION:
Accredited Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.

WORK HOURS:
Full-Time/First Shift
8 AM - 4 PM

MISCELANEOUS:
Travel Required-Travel to EEE Part manufacturer's local and domestic travel on occasion.

 
Job Number: 168068
Job Location: Huntington Beach, CA
Rate: $DOE
Duration: 6 MONTHS
Input Date: 01/22/2018
Last Updated: 09/22/2018
Firm Name: CHIPTON ROSS
Attention: Kristie Hardage
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: knguyen@chiptonross.com
Website: www.chiptonross.com

MP&P Engineer 3 - LA - SS

Description:
Chipton-Ross is seeking a MP&P Engineer for an opening in New Orleans, LA.

RESPONSIBILITIES:
This position is for a Materials, Processes and Physics Engineer Level 3 supporting the SLS program in New Orleans, Louisiana performing engineering and technical activities. The engineer will develop and execute plans to ensure business, technical, and customer requirements are achieved. The team will be responsible for activities including development and implementation of SLS specific processes, NASA-6016 requirements, review supporting engineering
documents, support supplier surveys and technical interchange meetings, provide liaison engineering support, and support material selection for subsystem /end item design concepts, coordination of MUIL/MUA.

REQUIRED EXPERIENCE:
MRB Experience a plus. Experience in a Materials, Process & Physics. Experience in contamination control, mechanical assembly, welding, orbital tube welding, adhesives, sealants, Thermal Protection Systems, wire harness routing and troubleshooting, metallurgy a plus.

EDUCATION:
Accredited Degree and typical experience in engineering classification: Bachelor's and 5 or more years' experience, Master's degree
with 3 or more years' experience or PhD degree with experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

FULL TIME/2ND SHIFT
WORK HOURS: 2:00 PM - 10:30 PM

TRAVEL: YES - 10%

MISCELLANEOUS:
This work assignment has been designated as "safety-sensitive" by the Client. Contractors assigned to safety-sensitive jobs at the Client site must first complete regulatory pre-placement requirements prior to reporting to assignment. Additionally, contractors assigned to safety-sensitive work will be subject to random drug and alcohol testing in accordance with federal mandates.
 
Job Number: 168082
Job Location: New Orleans, LA
Rate: $DOE
Duration: 12 Months
Input Date: 01/23/2018
Last Updated: 09/22/2018
Firm Name: CHIPTON ROSS
Attention: Johnnie Barrientos
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: jbarrientos@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structures MRB Engineer

Description:
Position Purpose
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of products and services

Unique Skills
• Bachelor’s Degree in aerospace or mechanical engineering.
• Minimum 10 years dedicated structures MRB Engineering experience at a recognized airframe manufacturer
• Experience should include creation of engineering dispositions for non-conformances for pressurized and non-pressurized metallic and non-metallic structures (fuselage, wing, and empennage).
• Experience should be in a Production and/or schedule-driven environment.
• Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule driven environment.
• Strong written/verbal communication and interpersonal skills.
• Must be computer literate (such as Catia V5, SmarTeam, Word, Excel)

Experience/Education
• Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 10 yrs in the specific technical discipline or 15 yrs broad engineering experience in several technical disciplines with Bachelors, or 8 yrs in the specific technical discipline with Masters, or 6 yrs in the specific technical discipline with PhD.
 
Job Number: 24-224
Job Location: Savannah, GA
Rate: $63-$68
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 03/20/2018
Last Updated: 06/22/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MRB Engineer - Mechanical Systems

Description:
General Summary:
The Engineer for Liaison/MRB reviews defects and establishes root cause, provides an acceptable disposition to repair the discrepant condition using engineering principles and determines if a corrective action required for mechanical systems.

Duties and Responsibilities:
1. Resolves complex engineering problems related to the build of the aircraft.
2. Reviews defects and establishes root cause, provides an acceptable disposition to repair the discrepant condition using engineering principles and determines if a corrective action is required.
3. Reviews Engineering documentation (drawings, test procedures, and discrepancy tags) to enable technicians to understand the documents and continue working.
4. Reviews, develops, and implements revised/new processes using six sigma/lean principles.
5. Provides an acceptable disposition of non-conformance of commercial mechanical systems encountered during Manufacturing/Assembly process and production, including reporting of failures, malfunctions, and defects.
6. Documents how to repair the discrepancy using engineering principles.
7. Assists in determining if defects are Engineering related or workmanship issues. Documents defect findings.
8. Ensures that the proposed repair is equivalent to the Blueprint design or will not affect systems functionality.
9. Incorporate design changes using CATIA V5.

Education, Work Experience, Certification and/or Licensure:
1. Bachelor's degree in Engineering or related field of study.
2. Minimum of 6 years to a maximum of 20 years’ experience in the engineering field.
3. 6 years’ experience serving as a Liaison for MRB Mechanical Systems is preferred.
4. Computer proficient with experience in Microsoft Office Programs (SAP a plus).
5. Excellent written and oral communication skills.
Knowledge, Skills and Abilities:
1. Strong oral and written communication skills.
2. Strong analytical skills.
3. Strong interpersonal skills. Ability to interact with all levels of the organization.
4. Detail oriented.
5. Strong organizational skills and ability to multitask.
6. Extensive experience with Six Sigma.
7. Advanced knowledge of Mechanical Systems concepts, CATIA V5, and Standard Repair Methods (SRM).

The Structures Company is an AA/EOE.
 
Job Number: 155
Job Location: NC
Duration: 9+ Month
Start Date: March 2018
Input Date: 03/08/2018
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
CONTRACT - Multiple OPENINGS

Unique Skills:
Solumina and SAP experience preferred.

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.


Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:

Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
Languages Required (in addition to English): English
 
Job Number: 10009
Job Location: Savannah, GA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 03/07/2018
Firm Name: ADVANCED TECHNOLOGY
Attention: Chris Lombardi
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Job Description
Manages high complexity design and planning of layout for assembly and materials handling. Adaptation of machine or equipment design to factory and production conditions. Planning of sequence of operations and specification procedures for the fabrication of tools and equipment and other functions that affect product performance.

Additional Job Details:

The Manufacturing Engineering functional group is responsible for determining manufacturing methods and writing manufacturing assembly documentation in order to assemble high quality, highly engineered hardware for use in space and sea applications, while complying with all applicable Environmental, Health and Safety requirements as well as all applicable Quality requirements.

Job Responsibilities:
The ideal candidate will be creative, energetic, flexible, possess a positive attitude and be eager to apply and expand their engineering skills in a highly ethical manner while supporting the Integrated Product Development Team model in which he or she will have overall accountability to ensure products are manufactured to meet engineering requirements, program budgets, and program schedules through performing the following specific activities:
* Mentor Manufacturing Engineering associates on instilling a Design to Cost mind-set and work to stream line the delivery of manufacturing assembly documentation as well as its use by our lab personnel.
* Develop the specific methods and instructions for manufacture and/or assembly of products.
* Determine manufacturing feasibility to:
o Identify potential fabrication problems
o Draw attention to special fabrication requirements
o Ensure the latest developments in manufacturing technology are considered in the design phase.
* Establish design inherent cost targets which reflect hardware target cost.

The Manufacturing Engineer works with the design team to insure that the proposed design is within the allowable cost.
* Participate in cost proposals by estimating Manufacturing Engineering tasks, tooling costs and developing manufacturing plans.
* Establish touch labor cost targets on shop/lab activities as requested.
* Define tool and gage requirements. Provide the necessary input and support to the tool design group. Ensure adequate tools and gages are available when needed in the process.
* Work with the Manufacturing Control Planner to establish the schedule for all Manufacturing Engineering and Assembly efforts.
* Provide support to all activities during the fabrication of the initial unit (first article) of each specific design to resolve processing problems.
* Review and implement engineering changes to determine feasibility, producibility and delta cost impact.
* Determine, implement and lead process improvement opportunities, business unit initiatives and corrective actions.
* Lead efforts to understand non-conformances and reduce Cost of Poor Quality.
* Lead 3P events, Value Stream Mapping events, and the implementation of Process Certification.

Education: * Candidate must possess a BS in Mechanical Engineering, Manufacturing Engineering, Industrial Engineering or a Technology Degree. * Background courses in mechanical design and/or manufacturing courses are beneficial.

Experience Preferred:
* 10 years’ experience working on the manufacture of complex mechanical systems is desirable
* Working knowledge of Microsoft Windows environment and experience in using any type of Publishing System
* Familiarity with a modeling and/or design package such as ProE, Creo, or CAD is desired.
* Knowledge of Lean Manufacturing, machining concepts and special processing, such as welding and brazing, is desirable.
* Strong knowledge of Continuous improvement methods (ACE or the DMAIC model) and demonstrated use of their tools is desirable
* Experience with a MRP (Manufacturing Resource Planning) system is desirable.

Additional Job Details:
Occasional off-shift coverage may be required.
 
Job Number: CT41047
Job Location: Windsor Locks, CT
Rate: 48.50
Per Diem: Possible
Overtime: Possible
Duration: 12 months
Input Date: 03/06/2018
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Bill Carriveau
Address: 7310 RITCHIE HWY STE 400
City, State: GLEN BURNIE, MD 21061-3092
800 Phone: 866/277-3343
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Location: Windsor Locks, CT
Rate: $48.50/HR
Duration: 1 year contract
Shift: 1st Shift – 8:00 AM to 5:00 PM
Overtime: Possible
Per Diem Split: NO


*****MUST be a U.S. Citizen*****


Job Description:
The Manufacturing Engineering functional group is responsible for determining manufacturing methods and writing manufacturing assembly documentation in order to assemble high quality, highly engineered hardware for use in space and sea applications, while complying with all applicable Environmental, Health and Safety requirements as well as all applicable Quality requirements.
- Manages high complexity design and planning of layout for assembly and materials handling.
- Adaptation of machine or equipment design to factory and production conditions.
- Planning of sequence of operations and specification procedures for the fabrication of tools and equipment and other functions that affect product performance.


Job Responsibilities:
The ideal candidate will be creative, energetic, flexible, possess a positive attitude and be eager to apply and expand their engineering skills in a highly ethical manner while supporting the Integrated Product Development Team model in which he or she will have overall accountability to ensure products are manufactured to meet engineering requirements, program budgets, and program schedules through performing the following specific activities:
- Mentor Manufacturing Engineering associates on instilling a Design to Cost mind-set and work to stream line the delivery of manufacturing assembly documentation as well as its use by our lab personnel.
- Develop the specific methods and instructions for manufacture and/or assembly of products.
- Determine manufacturing feasibility to:
- Identify potential fabrication problems
- Draw attention to special fabrication requirements
- Ensure the latest developments in manufacturing technology are considered in the design phase.

- Establish design inherent cost targets which reflect hardware target cost.
- The Manufacturing Engineer works with the design team to insure that the proposed design is within the allowable cost.
- Participate in cost proposals by estimating Manufacturing Engineering tasks, tooling costs and developing manufacturing plans.
- Establish touch labor cost targets on shop/lab activities as requested.
- Define tool and gage requirements.
- Provide the necessary input and support to the tool design group.
- Ensure adequate tools and gages are available when needed in the process.
- Work with the Manufacturing Control Planner to establish the schedule for all Manufacturing Engineering and Assembly efforts.
- Provide support to all activities during the fabrication of the initial unit (first article) of each specific design to resolve processing problems.
- Review and implement engineering changes to determine feasibility, producibility and delta cost impact.
- Determine, implement and lead process improvement opportunities, business unit initiatives and corrective actions.
- Lead efforts to understand non-conformances and reduce Cost of Poor Quality.
- Lead 3P events, Value Stream Mapping events, and the implementation of Process Certification.

Education:
- Candidate must possess a BS in Mechanical Engineering, Manufacturing Engineering, Industrial Engineering or a Technology Degree.
- Background courses in mechanical design and/or manufacturing courses are beneficial.

Experience Preferred:
- 10 years’ experience working on the manufacture of complex mechanical systems is desirable
- Working knowledge of Microsoft Windows environment and experience in using any type of Publishing System
- Familiarity with a modeling and/or design package such as ProE, Creo, or CAD is desired.
- Knowledge of Lean Manufacturing, machining concepts and special processing, such as welding and brazing, is desirable.
- Strong knowledge of Continuous improvement methods (ACE or the DMAIC model) and demonstrated use of their tools is desirable
- Experience with a MRP (Manufacturing Resource Planning) system is desirable.
 
Job Number: 8675
Job Location: Windsor Locks, CT
Rate: $48.50/HR
Per Diem: NO
Overtime: Possible
Duration: 1 yr
Start Date: ASAP
Input Date: 03/05/2018
Last Updated: 03/07/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
experience in developing and implementing repair processes specific to aero- and aero-derivative gas turbine engine components.

Duties Include

Under the direction of the RD Engineering Manager, identify and execute the implementation of new and derivative repairs for a wide variety of engine components.
Provide support and consultation services with regard to new technologies and the development of new repairs and processes.
Participate in all phases of product/process development. Provide analytical support, evaluation and calculations for new repair development studies and subsequent initiation including cost benefit analysis, evaluating end-user performance and providing cost and schedule estimates for proposed work packages.
Prepare engineering reports and data packages for repair development substantiation and approval.
Demonstrate the technical expertise and experience necessary to make airworthiness engineering decisions regarding major repair design activities, in accordance with the company design approval organization manual.
Compile and analyze data on repairs; identifies root causes and rectify; develop measures of performance on all repair processes. Use these data to assist with continuous improvement of component repair methods and capabilities.
Support the production development group activity in modifying and refining existing repair schemes to eliminate and/or reduce the number of rejects occurring.
Provide technical training support or mentoring for repair development and metallurgical analysis.
Direct acquisition of equipment as required to meet repair development objectives.
Position Requirements

Minimum 5 years’ experience in a related engineering discipline. Specific turbine engine component repair development experience is mandatory.
4 year degree in materials science, mechanical engineering or metallurgy
Thorough knowledge of gas turbine engine theory and performance
Fully conversant with testing methods and experiment design to meet airworthiness compliance program requirements.
Strong planning, organizational, analytical, leadership, interpersonal, decision making, oral and written communication skills.
Strong project management skills.
Thorough knowledge of aerospace materials and processes.
Ability to read, understand and interpret blueprints.
Working knowledge of PC's
Working knowledge of precision measuring instruments.
Experience working in jurisdictions governed by a regulatory body or with an association that is governed by local legal requirements, registration is required.
Experience in an aerospace engineering environment.
Must be legally able to work in the United States.
 
Job Number: 18-817
Job Location: Midwest and Texas
Duration: 6 months +
Input Date: 04/25/2018
Last Updated: 05/10/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Location: Windsor Locks, CT
Rate: $48.50/HR
Duration: 1 year contract
Shift: 1st Shift – 8:00 AM to 5:00 PM
Overtime: Possible
Per Diem Split: NO


*****MUST be a U.S. Citizen*****


Job Description:
The Manufacturing Engineering functional group is responsible for determining manufacturing methods and writing manufacturing assembly documentation in order to assemble high quality, highly engineered hardware for use in space and sea applications, while complying with all applicable Environmental, Health and Safety requirements as well as all applicable Quality requirements.
- Manages high complexity design and planning of layout for assembly and materials handling.
- Adaptation of machine or equipment design to factory and production conditions.
- Planning of sequence of operations and specification procedures for the fabrication of tools and equipment and other functions that affect product performance.


Job Responsibilities:
The ideal candidate will be creative, energetic, flexible, possess a positive attitude and be eager to apply and expand their engineering skills in a highly ethical manner while supporting the Integrated Product Development Team model in which he or she will have overall accountability to ensure products are manufactured to meet engineering requirements, program budgets, and program schedules through performing the following specific activities:
- Mentor Manufacturing Engineering associates on instilling a Design to Cost mind-set and work to stream line the delivery of manufacturing assembly documentation as well as its use by our lab personnel.
- Develop the specific methods and instructions for manufacture and/or assembly of products.
- Determine manufacturing feasibility to:
- Identify potential fabrication problems
- Draw attention to special fabrication requirements
- Ensure the latest developments in manufacturing technology are considered in the design phase.

- Establish design inherent cost targets which reflect hardware target cost.
- The Manufacturing Engineer works with the design team to insure that the proposed design is within the allowable cost.
- Participate in cost proposals by estimating Manufacturing Engineering tasks, tooling costs and developing manufacturing plans.
- Establish touch labor cost targets on shop/lab activities as requested.
- Define tool and gage requirements.
- Provide the necessary input and support to the tool design group.
- Ensure adequate tools and gages are available when needed in the process.
- Work with the Manufacturing Control Planner to establish the schedule for all Manufacturing Engineering and Assembly efforts.
- Provide support to all activities during the fabrication of the initial unit (first article) of each specific design to resolve processing problems.
- Review and implement engineering changes to determine feasibility, producibility and delta cost impact.
- Determine, implement and lead process improvement opportunities, business unit initiatives and corrective actions.
- Lead efforts to understand non-conformances and reduce Cost of Poor Quality.
- Lead 3P events, Value Stream Mapping events, and the implementation of Process Certification.

Education:
- Candidate must possess a BS in Mechanical Engineering, Manufacturing Engineering, Industrial Engineering or a Technology Degree.
- Background courses in mechanical design and/or manufacturing courses are beneficial.

Experience Preferred:
- 10 years’ experience working on the manufacture of complex mechanical systems is desirable
- Working knowledge of Microsoft Windows environment and experience in using any type of Publishing System
- Familiarity with a modeling and/or design package such as ProE, Creo, or CAD is desired.
- Knowledge of Lean Manufacturing, machining concepts and special processing, such as welding and brazing, is desirable.
- Strong knowledge of Continuous improvement methods (ACE or the DMAIC model) and demonstrated use of their tools is desirable
- Experience with a MRP (Manufacturing Resource Planning) system is desirable.
 
Job Number: 8674
Job Location: Windsor Locks, CT
Rate: $48.50/HR
Per Diem: NO
Overtime: Possible
Duration: 1 yr
Start Date: ASAP
Input Date: 02/23/2018
Last Updated: 03/07/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Manufacturing Engineer performs technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.


Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 01/13/2018
Last Updated: 05/18/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Manufacturing Engineer performs technical studies and conduct analysis of operations (existing or proposed). Develop plans and recommendations for equipment and tooling needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. Author DRDI/DMT reworks instructions to support effective corrective actions. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. Basic knowledge of Lean and/or Six Sigma principles. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, etc. Lean Specialist certification or higher preferred.

Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
 
Job Location: Savanah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/29/2017
Last Updated: 03/09/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer (15 plus needed)

Description:
Unique Skills:
• Catia V5, SAP and Solumina experience.

Principal Duties And Responsibilities:
• Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
• Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
• Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
• Investigate and assist in preparing justification for equipment and facility requests.
• Perform producibility studies from engineering drawings.
• Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
• Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures.
• Incorporate Lean Manufacturing Methodology into existing and future processes.
• Utilize CADAM/CATIA data and nesting software to generate flat patterns, Master Models, NC data, and ply nests to meet Engineering and Manufacturing requirements.
• With minimal supervision, lead/coordinate the implementation of projects between multiple organizations
• Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
• Support all Safety, Sustainability and Ergonomic Initiatives.
• Aid in development and maintenance of Business Continuity Plan.

Other Requirements:
• Proven knowledge of Lean and/or Six Sigma principles.
• Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
• Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, etc.
• Lean Six Sigma Greenbelt Certification or higher preferred.

Experience/Education:
• Bachelors degree in Mechanical, Manufacturing Engineering or related curriculum, or an equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Three (3) years Manufacturing Engineering, planning, or related technical experience.
 
Job Number: 24-206
Job Location: Savannah, GA
Rate: $50 - $55
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 02/22/2018
Last Updated: 03/19/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer (PWA and LRU Assembly) CA

Description:
13701

Title TEMP Staff Manufacturing Engineer (PWA and LRU Assembly)
Job Summary General Atomics Aeronautical Systems, Inc. (GA-ASI), an affiliate of General Atomics, is a world leader in proven, reliable remotely piloted aircraft and tactical reconnaissance radars, as well as advanced high-resolution surveillance systems.

We recognize and appreciate the value and contributions of individuals with diverse backgrounds and experiences and welcome all qualified individuals to apply.

Support the design (DFM), first article, production, test, and system integration of Printed Wiring Assemblies and Line Replaceable Units for all UAV platforms including Ground Control Stations (GCS). Assemblies will include surface mount as well as through hole technology and mechanical assembly.

Duties and Responsibilities •Responsible for manufacturing process development, implementation, and continuous improvement to enhance Quality / Yield, reduce Cost, and improve Productivity / Schedule. Initiate and lead lean manufacturing process improvement projects.
•Specify and implement automation equipment and processes.
•Identify and assist in addressing safety issues on the manufacturing floor.
•Support manufacturing production planning and coordination, execution and operations process development.
•Provide production support to assemblers and leads.
•Document manufacturing processes and assembly work instructions in conjunction with T&O Planning.
•Design shop aids and tooling to assist production.
•Disposition non-conforming parts, identify root cause, and implement corrective and/or preventive action to reduce scrap and rework.
•Collaborate with Design Engineering during prototype, development and first article manufacturing.
•Expertise in assembly methods and processes, including surface mount technology, through hole technology, mechanical assembly, and testing. Experience in both analog and digital technologies as well as a background with RF.
•Experience with development and deployment of manufacturing automation and remaining current with technology.
•Experience with Electrical Schematics and Circuit Diagrams; Drawings and BOMs; Assembly Instructions; Engineering Change systems; Quality systems for non-conforming parts and corrective action. Experience with Lean Manufacturing methodologies for waste reduction, e.g.: 5S, Standard Work, TAKT, Pull System, 5S, Value Stream Mapping, cell design, and manufacturing flow.
•Clearly and effectively communicate both verbally and in written form to both technical and non-technical audiences, especially regarding manufacturing processes, engineering issues and proposed changes, and quality issues and dispositions.

Qualifications Essential Qualifications Typically requires a bachelors degree, masters degree or PhD in engineering or a related technical discipline from an accredited institution and progressive engineering experience as follows; nine or more years of experience with a bachelors degree, seven or more years of experience with a masters degree, or four or more years with a PhD. May substitute equivalent engineering experience in lieu of education. Demonstrates an extensive technical expertise and application of engineering principles, concepts, theory, and practice with the ability to organize, plan, schedule, conduct, and coordinate workloads to meet established deadlines or milestones with some experience in project leadership. Must possess the ability to understand new concepts quickly and apply them accurately throughout an evolving environment. Strong communication, presentation, and interpersonal skills are required enabling an effective interface with other departments and/or professionals, and capable of representing the organization as a prime technical contact, as well as providing leadership and guidance to less experienced professionals. Customer focused, formulates plans based on the development of innovative new designs in resolving advanced technical engineering problems. Must be able to work both independently and in a team environment. Able to work extended hours as required. A Professional Engineering License, original work(s) published in professional engineering journals, and invited to present one or more original works to an engineering symposium are desirable.
Additional Qualifications Typically requires a bachelors degree, masters degree or PhD in engineering or a related technical discipline from an accredited institution and progressive engineering experience as follows; four or more years of experience with a bachelors degree or two or more years of experience with a masters degree.
•Experience with IPC & MIL standards, including: IPC/WHMA-A-610 and 620 , J-STD-001 – Requirements for Soldered Electrical and Electronic Assemblies, MIL-STD-1553 – Digital Time Division Command/Response Multiplex Data Bus, MIL-STD-1760 – Aircraft Electrical Interconnection System, SAE-AS39029 (MIL-C-39029)– Experience implementing capital equipment in factory environment.
•Experience with MRP systems, eg SAP or MTO/WDS. Experience with Microsoft Office Project and Visio.
•Experience with programming.
•Experience with databases, e.g. Oracle and FileMaker. Knowledge of SQL.
•Experience with process mapping and demand flow technology
•Strong background in electro-mechanical assemblies.
•Six Sigma Green Belt
City San Diego
State California
Travel Percentage Required 0% - 25%
Clearance Required? No
Work Schedule Rule 9/80
Temp Assignment Duration (# of Days) 180
 
Job Number: JE-13701
Job Location: San Diego, CA
Duration: 6 month contract
Input Date: 03/05/2018
Last Updated: 03/12/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer - Aerospace

Description:
Looking for go-getters with positive, can-do attitudes.
Candidates must be open to learning and be able to take initiative.
This is by far the most important attribute needed
** ** Level 1 candidates can be recent college graduates with applicable experience and education
** ** Level 2 candidates will have up to 2 years of applicable experience
The Manufacturing Engineer classifications are responsible for design, fabrication, modification, analysis and evaluation of manufacturing operations, processes, procedures and production layouts for the support of manufacturing / assembly operations for rocket engine components and/or systems, equipment installation, machining, metal forming, welding and brazing, and material handling. Skills:
Required:
• Designing and planning of layout component fabrication, assembly and material handling, planning of sequence of operations, and specification procedures.
• The scope of responsibility will be for several mechanical components or as a process engineer supporting new and developing process.
Desired:
• Tight tolerance machining, Welding, Design systems (ProE, CATIA, VisMockup, CAD/virtual manufacturing)
• Manufacturing fabrication and assembly processes and systems
• Verbal and written communication.
• Project management skills and MS Office applications (Word, Excel).
• Experience with Maestro, Delmia and Windchill are preferred, not required.
• Aerospace experience preferred but not required.
Education:
• Level 1: Bachelor's degree in an appropriate discipline, or an equivalent combination of education and experience.
• Level 2: Requires a Bachelor's degree in an appropriate discipline and 2 years of related experience, or an equivalent combination of education and experience.
 
Job Number: 384030
Job Location: Canoga Park, CA
Rate: 39
Duration: 7 Months
Start Date: 03/26/2018
Input Date: 03/02/2018
Firm Name: CDI CORPORATION
Attention: Jessica Jasa
Address: 17177 PRESTON RD STE 300
City, State: DALLAS, TX 75248
Website: www.cdicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer - Aerospace and Defense

Description:
Ingenium Technologies - San Diego, CA



A Manufacturing Engineer is needed for a proven and reliable world leader in Aviation Air-to-Ground Communications, Aircraft Systems and Tactical Reconnaissance Radars, as well as advanced high-resolution Surveillance Systems. This individual will support the design, production, test, and system integration of Printed Wiring Assemblies and Line Replaceable Units for all aircraft platforms.





Additional Job Postings: http://www.ingeniumtech.com/tech_staffing/



Responsibilities will include but not be limited to:



Support the design, production, test, and system integration of Printed Wiring Assemblies and Line Replaceable Units for all aircraft platforms.
Responsible for manufacturing process development, implementation, and continuous improvement to enhance Quality / Yield, reduce Cost, and improve Productivity / Schedule. Initiate and lead lean manufacturing process improvement projects.

Specify and implement automation equipment and processes.

Identify and assist in addressing safety issues on the manufacturing floor.

Support manufacturing production planning and coordination, execution and operations process development.

Provide production support to assemblers and leads.

Document manufacturing processes and assembly work instructions.

Design shop aids and tooling to assist production.

Disposition non-conforming parts, identify root cause, and implement corrective and/or preventive action to reduce scrap and rework.

Collaborate with Design Engineering during prototype, development and first article manufacturing.

Expertise in assembly methods and processes, including surface mount technology, through hole technology, mechanical assembly, and testing.

Experience in both analog and digital technologies as well as a background with RF.



Software Requirements:

MRP systems, eg SAP or MTO/WDS. Experience with Microsoft Office Project and Visio.
Databases, e.g. Oracle and FileMaker. Knowledge of SQL.


Required Experience:

5 to 15 Years experience in aerospace manufacturing, processing and materials knowledge.
Background in Printed Wiring Assemblies and Line Replaceable Units.
Expertise in assembly methods and processes, including surface mount technology, through hole technology, mechanical assembly, and testing.
Experience in both analog and digital technologies as well as a background with RF.
Experience with development and deployment of manufacturing automation and remaining current with technology.
Experience with Electrical Schematics and Circuit Diagrams; Drawings and BOMs; Assembly Instructions; Engineering Change systems; Quality systems for non-conforming parts and corrective action.
Experience with Lean Manufacturing methodologies for waste reduction, e.g.: 5S, Standard Work, TAKT, Pull System, 5S, Value Stream Mapping, cell design, and manufacturing flow.
Experience with IPC & MIL standards, including: IPC/WHMA-A-610 and 620 , J-STD-001 – Requirements for Soldered Electrical and Electronic Assemblies, MIL-STD-1553 – Digital Time Division Command/Response Multiplex Data Bus, MIL-STD-1760 – Aircraft Electrical Interconnection System, SAE-AS39029 (MIL-C-39029)– Experience implementing capital equipment in factory environment.
Experience with process mapping and demand flow technology
Strong background in electro-mechanical assemblies.
Six Sigma Green Belt preferred.
Required Education: Bachelor's degree preferred not required.



Position: Direct Hire



Location: San Diego, CA



Employment Criteria : This position includes access or potential access to ITAR technical data. Therefore, candidates will need to qualify as a US Citizen, who does not work for a foreign company/foreign government/foreign governmental agency or organization, and is in compliance with International Traffic in Arms Regulations.



Employment Statement: Ingenium Technologies is an equal opportunity employer and does not discriminate on the basis of race, color, religion, sex, age, national origin, disability, veteran status, sexual orientation or any other classification protected by federal, state or local law. Proof of eligibility for employment will be required upon employment.

Due to the requirements of the Customer, No Visa sponsorship is available.
 
Job Number: 120164
Job Location: San Diego, CA
Rate: 80-95k/yr
Per Diem: no
Overtime: no
Duration: Direct Hire
Start Date: asap
Input Date: 03/07/2018
Firm Name: INGENIUM TECHNOLOGIES
Attention: Alvin
Address: 4216 MARAY DR UNIT A1
City, State: ROCKFORD, IL 61107
Phone: 815/399-8803 X255
Fax Phone: 815/399-8804
Website: www.ingeniumtech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer - Level 1 & Level 2

Description:
Location: Canoga Park, CA
Rate: Level 1 = $30.00 - $33.00/HR & Level 2 = $35.00 - $39.00/HR
Duration: 6 month contract
Shift: Regular 40 hour week. OT possible.


** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable**

**An In-Person interview is REQUIRED. Candidates must be able to attend an in-person interview at their own expense**


Duties:
** Looking for a go getter with positive, can-do attitudes. Candidates must be open to learning and be able to take initiative. This is by far the most important attribute needed **
** Level 1 candidates can be recent college graduates with applicable experience and education**
** Level 2 candidates will have up to 2 years of applicable experience **

The Manufacturing Engineer classifications are responsible for design, fabrication, modification, analysis and evaluation of manufacturing operations, processes, procedures and production layouts for the support of manufacturing / assembly operations for rocket engine components and/or systems, equipment installation, machining, metal forming, welding and brazing, and material handling.


Skills:
Required:
-Designing and planning of layout component fabrication, assembly and material handling, planning of sequence of operations, and specification procedures.
-The scope of responsibility will be for several mechanical components or as a process engineer supporting new and developing process.


Desired:
-Tight tolerance machining, Welding, Design systems (ProE, CATIA, VisMockup, CAD/virtual manufacturing) .
-Manufacturing fabrication and assembly processes and systems. Verbal and written communication.
-Project management skills and MS Office applications ( Word, Excel).
-Experience with Maestro, Delmia and Windchill are preferred, not required.
-Aerospace experience preferred but not required.


Education:
Level 1: Bachelor's degree in an appropriate discipline, or an equivalent combination of education and experience.

Level 2: Requires a Bachelor's degree in an appropriate discipline and 2 years of related experience, or an equivalent combination of education and experience.
 
Job Number: 8705
Job Location: Canoga Park, CA
Rate: Level 1 = $30.00 - $33.00/HR & Level 2 = $35.00 - $39.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 03/02/2018
Last Updated: 03/26/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer - Level 2

Description:
Location: Oldsmar, FL
Rate: $30.00 - $35.00/HR
Duration: 1+ year contract
Shift: 2nd Shift – 3:30 PM to 1: 00 AM
Overtime: Possible on weekdays and weekends

*****MUST be a U.S. Citizen*****

Description
Provide manufacturing engineering support to the build of electromechanical cable assemblies. Provide day-to-day support to manufacturing operations to ensure quality, cost and schedule goals are met; Investigate, communicate, and solve design, producibility, and work instruction related assembly issues as required. Define optimal material and product flow within the production work cell, taking into consideration the unique requirements of each customer. Generate and maintain detailed assembly work instructions including narrative, diagrams, photographs, attachments, and linked documents. Support design change management activities. Perform and communicate nonrecurring engineering activities during production startup, which includes, writing work instructions, tooling and fixture design, development of machine automation programs as required, and configuration of the manufacturing bill of materials for manufacturability. Interface with technical counterparts in other organizations both within and outside Clearwater Operations. Must be willing to work 2nd shift

Skill/Experience/Education
Mandatory:
- Minimum 3 years manufacturing engineering experience in a technical role supporting the design and manufacturing of cable assemblies.
- Must have IPC-620 knowledge.
- Strong interpersonal skills and demonstrated ability to work with coworkers and others from diverse backgrounds.
- Proven ability to effectively communicate through written and oral means, and to multitask by handling multiple assignments in parallel.
- Mechanical and electrical aptitude, and the ability to quickly learn new software applications.
- Experienced user of Microsoft office software applications including MS Word, Project, Excel, Visio, and Power Point.
- Ability to read and interpret Engineering Drawings.
- Willingness to work overtime and during off days occasionally as required to support production operations.
- Must be willing to work 330pm to 1am.

Desired:
- Bachelors degree from an accredited University in Engineering.
- Experience or training with advanced manufacturing technology and automated equipment applications, particularly as it relates to cable assembly manufacturing; understanding of lean manufacturing principles and the use of statistical tools to solve problems.
- Strong technical understanding of cable assembly producibility and process flow.
- Specific experience with SAP and Solumina manufacturing execution system. Fiber optic cable manufacturing is a plus.
 
Job Number: 8697
Job Location: Oldsmar, FL
Rate: $30.00 - $35.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1+ yr
Start Date: ASAP
Input Date: 03/05/2018
Last Updated: 03/12/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer - Level 3

Description:
Location: Canoga Park, CA
Rate: $45.00 - $48.00/HR
Duration: 6 month contract
Shift: Regular 40 hour week. OT possible.


** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable**

**An In-Person interview is REQUIRED. Candidates must be able to attend an in-person interview at their own expense**


Duties:
** Looking for a go getter with positive, can-do attitudes. Candidates must be open to learning and be able to take initiative. This is by far the most important attribute needed **
** Level 3 candidates will have up to 2 to 5 years of applicable experience **

The Manufacturing Engineer classifications are responsible for design, fabrication, modification, analysis and evaluation of manufacturing operations, processes, procedures and production layouts for the support of manufacturing / assembly operations for rocket engine components and/or systems, equipment installation, machining, metal forming, welding and brazing, and material handling.


Skills:
Required:
-Designing and planning of layout component fabrication, assembly and material handling, planning of sequence of operations, and specification procedures.
-The scope of responsibility will be for several mechanical components or as a process engineer supporting new and developing process.


Desired:
-Tight tolerance machining, Welding, Design systems (ProE, CATIA, VisMockup, CAD/virtual manufacturing) .
-Manufacturing fabrication and assembly processes and systems. Verbal and written communication.
-Project management skills and MS Office applications ( Word, Excel).
-Experience with Maestro, Delmia and Windchill are preferred, not required.
-Aerospace experience preferred but not required.


Education:
- Requires a Bachelor's degree in an appropriate discipline and 5 years of related experience, or an equivalent combination of education and experience.
 
Job Number: 8706
Job Location: Canoga Park, CA
Rate: $45.00 - $48.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 03/02/2018
Last Updated: 05/07/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer - Level 4

Description:
Location: Canoga Park, CA
Rate: $55.00 - $58.00/HR
Duration: 6 month contract
Shift: 2nd Shift – 2:30 PM to 11:30 PM - Regular 40 hour week. OT possible.

** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable**

Duties:
** This role will be working second shift. 2:42 PM to 11:30 PM **
** Looking for go getters with positive, can-do attitudes. Candidates must be open to learning and be able to take initiative. This is by far the most important attribute needed **
** Level 4 candidates will have 5 to 9 years of applicable experience **
** Candidates must be able to attend an in-person interview at their own expense **

The Manufacturing Engineer classifications are responsible for design, fabrication, modification, analysis and evaluation of manufacturing operations, processes, procedures and production layouts for the support of manufacturing / assembly operations for rocket engine components and/or systems, equipment installation, machining, metal forming, welding and brazing, and material handling.


Skills:
Required:
-Designing and planning of layout component fabrication, assembly and material handling, planning of sequence of operations, and specification procedures.
-The scope of responsibility will be for several mechanical components or as a process engineer supporting new and developing process.


Desired:
-Tight tolerance machining, Welding, Design systems (ProE, CATIA, VisMockup, CAD/virtual manufacturing) .
-Manufacturing fabrication and assembly processes and systems.Verbal and written communication.
-Project management skills and MS Office applications ( Word, Excel).
-Experience with Maestro, Delmia and Windchill are preferred, not required.
-Aerospace experience preferred but not required.


Education:
- Requires a Bachelor's degree in an appropriate discipline and 9 years of related experience, or an equivalent combination of education and experience.
 
Job Number: 8707
Job Location: Canoga Park, CA
Rate: $55.00 - $58.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 03/02/2018
Last Updated: 05/07/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer / Level 1 & Level 2 / local only / CA

Description:
Job Title: Manufacturing Engineer / Level 1 & Level 2

Number of Positions: 2

Remaining Positions: 2

Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable


** Candidates must be able to attend an in-person interview at their own expense **


** Looking for go getters with positive, can-do attitudes. Candidates must be open to learning and be able to take initiative. This is by far the most important attribute needed **



** Level 1 candidates can be recent college graduates with applicable experience and education **



** Level 2 candidates will have up to 2 years of applicable experience **



** Candidates must be able to attend an in-person interview at their own expense **





The Manufacturing Engineer classifications are responsible for design, fabrication, modification, analysis and evaluation of manufacturing operations, processes, procedures and production layouts for the support of manufacturing / assembly operations for rocket engine components and/or systems, equipment installation, machining, metal forming, welding and brazing, and material handling.

Skills:
Required:

-Designing and planning of layout component fabrication, assembly and material handling, planning of sequence of operations, and specification procedures.

-The scope of responsibility will be for several mechanical components or as a process engineer supporting new and developing process.



Desired:

-Tight tolerance machining, Welding, Design systems (ProE, CATIA, VisMockup, CAD/virtual manufacturing) .
-Manufacturing fabrication and assembly processes and systems.Verbal and written communication.

-Project management skills and MS Office applications ( Word, Excel).

-Experience with Maestro, Delmia and Windchill are preferred, not required.

-Aerospace experience preferred but not required.



Education:
Level 1: Bachelor's degree in an appropriate discipline, or an equivalent combination of education and experience.



Level 2: Requires a Bachelor's degree in an appropriate discipline and 2 years of related experience, or an equivalent combination of education and experience.

Skills:
Required
MANUFACTURING ENGINEER
Additional
AEROSPACE

State/Province: California
City/Town: Canoga Park

Start Date: 03/26/2018 Hours Per Week: 40.00
Est. End Date: 09/30/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7579574
Job Location: Canoga Park, CA
Rate: 33-39/hr DOE
Duration: 6 months +
Input Date: 03/06/2018
Last Updated: 03/22/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer / Level 3 CA

Description:
161431/7579579
Job Title: Manufacturing Engineer / Level 3

Number of Positions: 2

Remaining Positions: 2

Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable





** Looking for go getters with positive, can-do attitudes. Candidates must be open to learning and be able to take initiative. This is by far the most important attribute needed **



** Level 3 candidates will have up to 2 to 5 years of applicable experience **



** Candidates must be able to attend an in-person interview at their own expense **





The Manufacturing Engineer classifications are responsible for design, fabrication, modification, analysis and evaluation of manufacturing operations, processes, procedures and production layouts for the support of manufacturing / assembly operations for rocket engine components and/or systems, equipment installation, machining, metal forming, welding and brazing, and material handling.

Skills:
Required:

-Designing and planning of layout component fabrication, assembly and material handling, planning of sequence of operations, and specification procedures.

-The scope of responsibility will be for several mechanical components or as a process engineer supporting new and developing process.



Desired:

-Tight tolerance machining, Welding, Design systems (ProE, CATIA, VisMockup, CAD/virtual manufacturing) .
-Manufacturing fabrication and assembly processes and systems.Verbal and written communication.

-Project management skills and MS Office applications ( Word, Excel).

-Experience with Maestro, Delmia and Windchill are preferred, not required.

-Aerospace experience preferred but not required.



Education:
Requires a Bachelor's degree in an appropriate discipline and 5 years of related experience, or an equivalent combination of education and experience.

Skills:
Required
MANUFACTURING ENGINEER
Additional
AEROSPACE

State/Province: California
City/Town: Canoga Park

Start Date: 03/26/2018 Hours Per Week: 40.00
Est. End Date: 09/30/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7579579
Job Location: Canoga Park, CA
Rate: 48/hr max
Per Diem: no
Duration: 6 months +
Input Date: 04/18/2018
Last Updated: 05/11/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer / Level 4 / 2nd shift CA

Description:
161466/7679383
Job Title: Manufacturing Engineer / Level 4

Number of Positions: 1

Remaining Positions: 1

Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable





** This role will be working second shift. 2:42 PM to 11:30 PM **



** Looking for go getters with positive, can-do attitudes. Candidates must be open to learning and be able to take initiative. This is by far the most important attribute needed **



** Level 4 candidates will have 5 to 9 years of applicable experience **



** Candidates must be able to attend an in-person interview at their own expense **





The Manufacturing Engineer classifications are responsible for design, fabrication, modification, analysis and evaluation of manufacturing operations, processes, procedures and production layouts for the support of manufacturing / assembly operations for rocket engine components and/or systems, equipment installation, machining, metal forming, welding and brazing, and material handling.

Skills:
Required:

-Designing and planning of layout component fabrication, assembly and material handling, planning of sequence of operations, and specification procedures.

-The scope of responsibility will be for several mechanical components or as a process engineer supporting new and developing process.



Desired:

-Tight tolerance machining, Welding, Design systems (ProE, CATIA, VisMockup, CAD/virtual manufacturing) .
-Manufacturing fabrication and assembly processes and systems.Verbal and written communication.

-Project management skills and MS Office applications ( Word, Excel).

-Experience with Maestro, Delmia and Windchill are preferred, not required.

-Aerospace experience preferred but not required.



Education:
Requires a Bachelor's degree in an appropriate discipline and 9 years of related experience, or an equivalent combination of education and experience.


Skills:
Required
MANUFACTURING ENGINEER
Additional
AEROSPACE

State/Province: California
City/Town: Canoga Park

Start Date: 03/26/2018 Hours Per Week: 40.00
Est. End Date: 09/30/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7679383
Job Location: Canoga Park, CA
Rate: 58/hr max
Per Diem: no
Duration: 6 months +
Start Date: ** This role will be working second shift. 2:42 PM to 11:30 PM **
Input Date: 04/30/2018
Last Updated: 05/03/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Location: Savannah, GA
Rate: $50.00/HR
Duration: Long Term contract
Shift: 1st Shift


Unique Skills:
Experience writing manufacturing work instructions and creating bill of materials for aircraft manufacturing.

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 7979
Job Location: Savannah, GA
Rate: $50.00/HR
Per Diem: Possible
Overtime: Possible
Duration: LT
Input Date: 03/07/2018
Last Updated: 05/07/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Manufacturing Engineer II

Location: Savannah, GA
Rate: $50.00/HR
Duration: Long Term contract
Shift: 4x10


Unique Skills:
Required: SAP - Catia - Solumina

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 7515
Job Location: Savannah, GA
Rate: $50.00/HR
Per Diem: Possible
Overtime: Possible
Duration: LT
Input Date: 03/07/2018
Last Updated: 03/07/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Location: Savannah, GA
Rate: $50.00/HR
Duration: Long Term contract
Shift: 4x10


Unique Skills:
Catia / SAP / SOLUMINA / SmarTeam

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months (18) Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). 2. Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 3. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 4. Author DRDI/DMT rework instructions to support effective corrective actions. 5. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 6. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 7. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 8. Investigate and assist in preparing justification for equipment and facility requests. 9. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. 10. Participate in Design for Manufacturing assessments with Engineering. 11. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 12. Perform audit of co-workers output based on defined requirements and procedures. 13. Must demonstrate knowledge of ME policies and procedures. 14. Incorporate Lean Manufacturing Methodology into existing and future processes. 15. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 16. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 17. Support all Safety, Sustainability and Ergonomic Initiatives. 18. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 7886
Job Location: Savannah, GA
Rate: $50.00/HR
Per Diem: Possible
Overtime: Possible
Duration: LT
Input Date: 03/07/2018
Last Updated: 03/07/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com