Job Search Results

944 listings were found that matched your search words: Keywords: Software ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2018/07/17 Tuesday 02:19PM Pacific Time by ContractJobHunter. )

Listings 1 - 944

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2272 - MATERIALS & PROCESSES - COMPLETIONS - cv, word doc only

Description:
Support the Engineering, Production and Quality organizations;

Assess various metallic, composite and completion finishing materials (Wood Veneer, Fabric, Leather, etc.);

Engage in engineering development work;

Sign engineering drawings and documentations;

Prepare Test Plans and approve Test Reports (including flammability);

Perform Trade and Design Studies;

Support various research and development projects;

Act as M&P expert;

Create, improve and adapt technical and functional processes;

Take on strategic projects management;

Plan, execute audits, prepare reports and follow up on corrective actions;

Analyze process and systems changes.

University degree in metallurgical, chemical or materials engineering with at least 3 years of pertinent experience (relevant experience in aerospace field is an asset)

Familiar with the materials used in aerospace industry and the manufacturing and application procedures.

Familiar with the typical military standards or the aerospace industry standards (e.g.: MIL, SAE specifications, FAA requirements, etc).

Knowledge of the aluminum, composite and aircraft completion finishing materials characteristics as well as their treatment.

Practical knowledge and experience of Catia/Enovia V5.

Work under minimum supervision to perform a wide range of technical functions.

Practical knowledge and experience in aircraft structure and completion components.

Customer-oriented with innovative problem solving skills and you are organized.

Good communication skills including good English and French writing and verbal skills.

Are a team player, working in a multidisciplinary team.

Good command of various software (MS Suite, Outlook, Acrobat, etc.).

Job Number: 2272
Job Location: Montreal, Canada
Rate: 56.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 09/21/2017
Last Updated: 02/23/2018

Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2297 - DESIGN ENGINEER - CABINET DETAILED DESIGN - cv word doc only

Description:
Act as a specialist in aircraft interior cabinets;

Search for information related to project assignment to the interior and exterior of the aircraft;

Manage customer requests related to customizations of interior options;

Establish technical requirements, mechanical and electrical interfaces and design, integrate, certify, test and troubleshoot the systems described above;

Assume responsibility for Definition engineering deliverables and milestones that the department must meet;

Bachelor's Degree in Mechanical or Equivalent Engineering or college.

Excellent knowledge in design and development of concepts using graphic design software.

Collaborate with others in a multidisciplinary team, adapt easily to changes and customer focused.

Customer focused, problem-solving and innovative focus as well;

Experienced with the CATIA V5 3D design tool;

Well organized and project focused.

Good oral and written communication skills in English and French;

Autonomous, flexible and results-oriented through project management skills;

Experience in the design or installation of cabinets to be assembled.

Job Number: 2297
Job Location: Montreal, Canada
Rate: 56.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/08/2017
Last Updated: 12/19/2017

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2303 - PROPULSION SYSTEMS ENGINEER - cv, word doc only

Description:
Coordinate product development activities between the supplier of the system and the affected work packages.

Ensure successful design, validation, certification and delivery of the system.

Ensure successful completion of each development phase deliverables (may author, review, approve).

Problem solve the technical issues in a cross functional environment.

Duties include:

Design and integration of the system;

Review of design and documentation of all the aspects related to your system;

Checking for quality of the Supplier's analyses;

Validation and verification of system requirements;

Validation and verification of system performance through design reviews, analyses, rig and aircraft testing;

Definition, preparation and execution of qualification and certification tests;

Working with supplier in the investigation and resolution of test findings;

Preparation or review of qualification or certification reports;

Working with suppliers to establish complete system requirements and system interfaces;

Liaison with stress, loads, reliability, maintainability and safety (RM&S), simulation, customer and operations support departments;

Identify issues and obstacles, follow-up and communicate progress;

Prepare reports or presentations.

Bachelor or Master's (preferred) degree in Mechanical or Aerospace Engineering with a relevant experience of a minimum of 5 to 8 years.

Must have a good knowledge of propulsion systems and their integration on the aircraft.

Have a background in design, integration, development and certification of Propulsion Systems.

Cognizant of the relevant Airworthiness Regulations and certification process.

Have knowledge of MS Office software (essential).

Familiar with Part 25 Regulations and certification requirements.

Flight testing/testing experience an asset.

Good oral and technical writing skills in English (required) and knowledge of French is an asset.

Motivated, self-starter, organized, autonomous and able to work under limited supervision.

Team player: able to work with suppliers and customers.

Must be dynamic, use initiative, have a strong sense of responsibility and good judgment.

Flexibility is expected: (may be on-call, shift-work, rotational work, weekends, odd hours, etc).

Job Number: 2303
Job Location: Toronto, Canada
Rate: 58.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/30/2017
Last Updated: 01/26/2018

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Admin Support Representatives - Camden, AR

Description:
STS AeroStaff Services now offers Admin Support Representative jobs in Camden, Arkansas.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Duties:

• Performs variety of activities in support of functional areas such as finance, purchasing, or human resources or for a specific project/business/technical unit
• Gathers, collects, records, tracks and verifies data and information from multiple sources
• Compiles, reviews and analyzes data
• Uses software for functional area, to compile and generate reports, statistics, timelines, tables, graphs, correspondence and presentations
• May design processes to enhance work flow
• Provides data and information to others on functional unit processes and procedures

Qualifications:

• Must have a High School Diploma, plus 1 year of administrative experience

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.

Job Number: 40746
Job Location: Camden, AR
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 11/29/2017

Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Administrative Assistants - Houston, TX

Description:
STS AeroStaff Services now offers Administrative Assistant jobs in Houston, Texas.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Shift Schedule:

• 6am-3pm with Wed/Thurs off (working weekends and most likely holidays)

Job Duties:

• Provides friendly service to and maintains positive relationships with all internal and external Customers
• Works in a cooperative spirit to ensure the success of our Company
• Performs secretarial and administrative duties for Leadership and staff under minimal supervision
• Answers calls, relays and takes messages, transfers calls, provides assistance to callers, screens calls and places calls for management
• Maintains department personnel files and paperwork
• Organizes and maintains payroll file room and coordination of timely rotation of files to off-site storage facility
• Orders supplies using established Company vendors and ordering methods
• Opens, sorts, screens and responds to incoming mail
• Composes, types and edits correspondence
• Compiles data and prepares special reports; gathers and summarizes data
• Makes arrangements for meetings and luncheons as directed by the department Leadership Team
• Maintains appointment calendars for management
• Arranges travel and accommodations for management and staff
• Establishes meeting times, secures location and contacts attendees
• Establishes and maintains files and other information for reference and control purposes
• Prepares confidential paperwork regarding performance appraisals, promotions and other people-related issues for management
• Maintains invoice and budget files and assists in the compilation of variance reports
• Operates computer equipment utilizing word processing, spreadsheet, data base management and presentation software
• Some data entry may be required
• Operates copy machine, FAX equipment and other standard office equipment
• May perform other job duties as directed by Leadership
• Must be able to meet any physical ability requirements listed on this description
• May perform other job duties as directed by Employee's Leaders
• Responsible for making arrangements for meetings and luncheons and handle travel arrangements as necessary
• Responsible for the payroll records for the entire Department, including Incentive Passes

Qualifications:

• High School diploma or equivalency required
• Previous analytical/technical experience preferred
• Must provide friendly service to and maintains positive relationships with all internal and external Customers
• Operation of multi-line telephone with courtesy and sufficient speed
• Ability to operation copy machine, FAX machine and other standard office equipment
• Open, sort and screen incoming mail
• Must master computer software applications such as Outlook, Quickbase, Microsoft Word, Excel, PowerPoint and Access
• Must have sufficient ability to handle and resolve office administration tasks
• Must be able to perform mathematical computations
• Must possess excellent organization skills including establishing and maintaining files for reference and control purposes
• Must work under tight time constraints including meeting unforeseen deadlines to accomplish assignments and projects
• Must be able to effectively communicate verbally, by telephone and face to face
• Must have ability to keyboard with sufficient speed and accuracy to meet the demands of the job
• Must be able to read documents, follow instructions, learn and understand office procedures
• Must compile data and prepare special reports
• Must have ability or must gain ability to use SWEEP for ordering department supplies
• Must be able to work varying schedules and work weekends as required
• Must be able to work occasional overtime, as necessary
• Must be able to comply with Company attendance standards as described in established guidelines
• Must meet confidentiality expectations as to confidential, proprietary and sensitive Company information
• Must maintain a well-groomed appearance per Company appearance standards as described in established guidelines
• Must be a U.S. citizen or have authorization to work in the United States as defined by the Immigration Reform Act of 1986

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.

Job Number: 40854
Job Location: Houston, TX
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 12/07/2017

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerodynamics & Performance Engineer windtunnel, flight testing, 6DOF, Aerodynamics database, aircraft conceptual CA

Description:
14482

Title TEMP Aerodynamics & Performance Engineer
Job Summary General Atomics Aeronautical Systems, Inc. (GA-ASI), an affiliate of General Atomics, is a world leader in proven, reliable remotely piloted aircraft and tactical reconnaissance radars, as well as advanced high-resolution surveillance systems.

We recognize and appreciate the value and contributions of individuals with diverse backgrounds and experiences and welcome all qualified individuals to apply.
•Develop analysis tools, perform mathematical modeling, and provide aerodynamic design support for new aircraft and modifications to existing aircraft (both fixed wing and/or rotorcraft).

•Support various tests including wind tunnel tests and flight tests, including reducing and analyzing the data after the test and documenting the results.

•Responsibilities will include aerodynamic database development, aircraft performance analysis, mathematical modeling, simulation development and support, flight data analysis, and documentation.

•Position requires strong analytical and communication skills (written & oral) and the ability to work closely with different test and design groups, including the CFD, Simulation, Software, and Flight Controls Groups.

•Candidate must be competent with Matlab, MS office products (Word, Excel, PowerPoint), and have excellent technical writing skills.

•Familiarity with MS Project, C++, Simulink, and expert user of Matlab is desirable.

Prior experience with aircraft flight testing and knowledge of flight dynamics, flight data analysis and interpretation, and development of data analysis tools would be very useful.

Essential Qualifications:

•Typically requires a bachelors degree, masters degree or PhD in engineering or a related technical discipline from an accredited institution and progressive engineering experience as follows; four or more years of experience with a bachelors degree or two or more years of experience with a masters degree.
•Must have a complete understanding of engineering concepts, principles, codes, and theory; experience demonstrating a broad application of those concepts; and, expanding knowledge of principles, concepts, theory, and practices in related technical specialties.

•Must possess the ability to understand new concepts quickly; apply them accurately throughout an evolving environment; organize, schedule, and coordinate work phases; and, determine the appropriate approach at the task level or, with assistance, at the project level to provide solutions to a range of complex problems. Must have excellent communication, computer, documentation, presentation, and interpersonal skills, ability to work independently and as part of a team; able to perform complex tasks in one engineering area; and, lead a team of less experienced professional employees on semi-routine tasks.

•Able to work extended hours as required.

•A Professional Engineering License is desirable.

Qualifications Essential Qualifications Typically requires a bachelors degree, masters degree or PhD in engineering or a related technical discipline from an accredited institution and progressive engineering experience as follows; four or more years of experience with a bachelors degree or two or more years of experience with a masters degree. May substitute equivalent engineering experience in lieu of education. Must have a complete understanding of engineering concepts, principles, codes, and theory; experience demonstrating a broad application of those concepts; and, expanding knowledge of principles, concepts, theory, and practices in related technical specialties. Must possess the ability to understand new concepts quickly; apply them accurately throughout an evolving environment; organize, schedule, and coordinate work phases; and, determine the appropriate approach at the task level or, with assistance, at the project level to provide solutions to a range of complex problems. Must have excellent communication, computer, documentation, presentation, and interpersonal skills, ability to work independently and as part of a team; able to perform complex tasks in one engineering area; and, lead a team of less experienced professional employees on semi-routine tasks. Able to work extended hours as required. A Professional Engineering License is desirable.
City San Diego
State California
Travel Percentage Required 0% - 25%
Clearance Required? Desired
Work Schedule Rule 9/80
Temp Assignment Duration (# of Days) 180

Job Number: JE-14482
Job Location: San Diego, CA
Duration: 6 month contract
Input Date: 01/03/2018
Last Updated: 01/03/2018

Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer / no clearance / Flight Control and Vehicle Management System skills a requirement CA

Description:
Requirement #AERO-REQ-0710
Work Location Palmdale, CA (1011 Lockheed Way)
Work Week 9/80

Needed Date 11/28/2017
End Date 11/09/2018
Number of Resources 1
No Clearance

Flight Control and Vehicle Management System skills a requirement

Title: Aeronautical Engineer

Description

Candidate will contribute to aircraft FC&VMS (Flight Controls & Vehicle Management System) design, configuration development, feasibility and risk analyses, and technology maturation plans, define, develop, analyze and coordinate FC&VMS requirements with other flight sciences disciplines including ground and flight test, reliability & maintainability, system safety, and other personnel. Develop models and simulations as needed for design and analysis. Perform trade studies and define preliminary requirements for VMS architecture components. Design mechanical and electrical/electronic interfaces to support system integration and test. Define high level software requirements and flow down requirements to procurement specifications. Tasks may also include management of selected vendors, including verification of requirements. The candidate will support system/software verification and validation effort and customer reviews during all phases of system development. The candidate will develop and support integration and system check out (SCO) procedures on flight test article and support pre-flight and post-flight analysis and reviews

Skill/Experience/Education

Mandatory:

Hardware and software integration experience Familiarity with Flight Controls and Vehicle Management Systems Demonstrated ability coordinating with systems engineering, hardware designers and subsystems
Desired:

B.S. Degree or above in an Engineering Discipline
Several years of hardware & laboratory experience MATLAB, Simulink experience

Interview Required Yes
OT Allowed Yes (OT Limitation: No)
Travel No
Non-Exempt
Rate Type Per Hour

Rates
0-4 Yrs Pay Rate: 65.00 USD
5-8 Yrs Pay Rate: 70.00 USD
9+ Yrs Pay Rate: 75.00 USD

Job Number: JE-0710
Job Location: Palmdale, CA
Rate: 65-75/hr DOE
Duration: 12 month contract
Input Date: 01/16/2018
Last Updated: 02/06/2018

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer with active secret / design of mechanical and electronic interfaces / integration test / serial buses C/C++ programming CA

Description:
160459
Requirement #AERO-REQ-0666
Work Location Palmdale, CA
Work Week 9/80
Priority High
Needed Date 11/27/2017
End Date 11/09/2018
Number of Resources 1
Security Clearance Secret

Title: Aeronautical Engineer

Description

Candidate will be responsible for designing and building a system integration laboratory (SIL). This effort includes design of mechanical and electronic interfaces to support software development, integration and test efforts. Candidate will have hands-on hardware experience and software skills. Candidate will be able to troubleshoot hardware/software integration issues and perform integration and test. Define, develop, analyze and coordinate SIL requirements, allocate requirements and define interfaces between subsystems. Effort also includes flow down of requirements to procurement specifications, and management of vendor selection and vendor performance, including verification of requirements. The candidate will support system/software verification and validation effort and customer reviews during all phases of system development. The candidate will develop and support integration and system check out (SCO) procedures on flight test article and support pre-flight and post-flight analysis and reviews. Good oral and written communication skills are required as is the ability to flex and adapt in a fast-paced team environment. Complex organization and documentation skills are required.

Skill/Experience/Education

Mandatory:

Final Secret Clearance.

Hardware and software integration experience.
Demonstrated ability to design and troubleshoot mechanical and electronic interfaces to support software development and test.
C or C++ programming experience.
Experience with serial buses.

Desired:

B.S. Degree or above in an Engineering Discipline Several years of laboratory experience

Interview Required Yes
OT Allowed Yes (OT Limitation: No)
Travel No
Non-Exempt

Rates
0-4 Yrs Pay Rate: 65.00 USD
5-8 Yrs Pay Rate: 70.00 USD
9+ Yrs Pay Rate: 75.00 USD

Job Number: JE-0666
Job Location: Palmdale, CA
Rate: 65-75/hr DOE
Duration: 12 month contract
Input Date: 12/04/2017
Last Updated: 03/15/2018

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Engineer ( Dulles, VA ) 7598203, GNC

Description:
Aerospace Engineer ( Dulles, VA ) 7598203
6 Month Contract

Pay Rate : $80/hr

**Looking for cand. w/ Satellite exp. Need strong GNC background/education/work exp. Exp. designing guidance and controls systems pref. Knowledge of GNC software important.

Cand. w/ hands-on exp. are key. No work from home or contractors who have moved around a lot. Should have steady exp. working with known companies. Looking for at least 10 yrs of exp. 3-5 yrs/fresh outs will not work. Do not want to spend time training unskilled workers.

Cand. will work with Product Lead and report to the Sr. Mgr of Eng.**

Perform spacecraft attitude control systems analysis, design, development and test activities. Design and develop spacecraft Guidance, Navigation and control algorithms using MATLAB and Simulink. Develop subsystem specifications, GNC Flight software and GNC test scripts. Develop and test operations scripts. Document analysis results and create presentation materials.

Job Number: 7598203
Job Location: Dulles, VA
Rate: 80
Per Diem: Split
Overtime: Yes
Duration: 6 month
Start Date: ASAP
Input Date: 01/19/2018

Firm Name: TALENTPRO CONSULTING
Attention: Tim
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X101
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Materials Estimator

Description:
(85%) Reads and understands RFP requirements and documents and communicates ground rules/assumptions used in proposals. Material Estimators generally perform the following in support of the cost Proposal:

Work with Engineering, Supply Chain and Manufacturing to obtain the latest BOM to initiate the estimating process
Work with Program Management and Integrated Product Teams to determine BOM requirements based on the statement of work including tooling, test units, spares or any materials not identified on the latest BOM.
Work with functional areas to identify excess material attrition/scrap factors
Identify current quote requirements in order to achieve 80% or more of the Proposal BOM (PBOM) if required.
Coordinate with Supply Chain Material Program Managers the supplier quote process
Coordinate with Supply Chain Material Planners current inventory, material transfers and historical part pricing
Review quotes received and populate the PBOM
Incorporate escalation, quantity variance curves and extend pricing for required quantities
Produce PBOM Addendums and other schedules
Focal for all estimates, proposal substantiation, PBOM development, and audit files
Responsible to ensure compliance with FAR/TINA requirements on proposal substantiation, basis of estimates, fact-finding, and negotiations
(15%) Maintains pricing systems and procedures.

Collects, analyzes and stores data for estimating and analysis.
Keeps current with federal acquisition (FAR) regulations and customer requirements.
Assists in developing, maintaining and monitoring estimating and estimating standards, procedures and processes.
Conceives and plans process improvement projects involving the development of new approaches and methods to attain objectives.
May provide input to department objectives and long-range goals.
Keeps current with programs, customers and Aerojet program team.
Plans and performs systems and procedures audits.

Knowledge of basic mathematics and statistics, analytical aptitude, strong oral and written communication skills. Requires familiarity with estimating and pricing procedures, audit methods.
Manufacturing, material planning, finance or supply chain background – or some knowledge of the processes.
Understands difference between Manufacturing and Engineering Drawings/BOMs
MS Office skills including Excel, Word, Access and PowerPoint
Intermediate level Excel knowledge (SUMIF, VLOOKUP, combination formulas, etc.).
Understanding of applicable federal acquisition regulations plus a strong knowledge of current (TINA) disclosure requirements.
Requires a willingness and ability to work extended hours when proposal schedules necessitate.
Basic understanding of Blue Prints / Drawings, Part lists preferred.
Experience and knowledge with EBS ProPricer or other pricing software preferred.
Familiarity with aerospace rocket motor program materials and manufacturing processes is a plus.

Bachelor's degree in engineering, finance, business management or manufacturing operations discipline and six (6) or more years directly related experience, or an equivalent combination of education and experience.

Job Number: Aero777
Job Location: Canoga Park, CA
Input Date: 11/29/2017

Firm Name: NESC STAFFING
Attention: Christina Ellis
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
Phone: 603/431-9740
800 Phone: 800/562-3463
Fax Phone: 800/637-2562
Website: www.nesc.com

Assistant-Network - II

Description:
PDS Tech is seeking a candidate for the Assistant Network II position located in Westlake, TX.
Assistant Network is responsible for providing support to the network New Build Real Estate Site Acquisition team.
All of the job functions support new build site acquisition team, the specific tasks include receiving invoices for payment for site acquisition services for new build real estate sites, creating purchase orders, maintaining records for new build cell sites, maintaining site list and contact numbers for work groups, and providing updates as required.
May also be responsible for providing the highest possible quality and reliability in both clerical and technical areas, including interfacing with various departments such as: Legal, Environmental, Accounts Payable, Purchasing, IT etc.
Minimum AA degree or equivalent.
Must be highly proficient utilizing Microsoft Windows, Excel, Word, PowerPoint, related Windows-based software and Siterra and/or Site Tracker data bases a plus.
Must be able to work as part of a support staff in a technical office environment.
Must have the ability to support a group of 20 plus.
Knowledge of PeopleSoft (Purchasing System) i.e., creation of purchase orders.
Ability to multitask and prioritize the assignments as and when required.
5 to 7 years of experience.

Job Number: 1710066653
Job Location: Roanoke, TX
Duration: 12 months
Input Date: 04/12/2017
Last Updated: 07/17/2018

Firm Name: PDS TECHNICAL SERVICES
Attention: Jan Manalaysay
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000021k0cAAA&URLSource=cjhunter

Automation Software Developers

Description:
OOP-object oriented programming, high speed

Job Location: Midwest
Input Date: 01/14/2015

Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: ccastro@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aviation Business Analysts - Greensboro, NC

Description:
STS AeroStaff Services now offers Aviation Business Analyst jobs in Greensboro, North Carolina.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Summary:

The Business Process Analyst works closely with Product Support management in identifying and defining key business process flows and the associated data management. The primary goal of this position is to provide support as needed to business users, including Claims Administration, Parts Sales, Technical Publications, Finance and Service Center personnel to successfully manage operations to achieve financial, operational and customer service objectives. This role will document requirements, coordinate functional evaluations and assist in the implementation and testing of new or enhanced systems. This position serves as a primary liaison between Customer Service and the client. This person will achieve “super user” proficiency, train others, assist in the development of desk-top instructions and seek continuous improvement in all processes.

Job Duties:

• Manage master data, ensure accuracy and completeness for Customer Service
• System integration support of inventory management, logistics, and Third Party services tracking and financial impact
• Become a system business process owner for all customer web portal processes
• Technical data development (authoring) and deployment processes using the customer web portal and other distribution methods
• Collaborate with IS, Engineering and Technical Support groups as needed in process development for aircraft data capture, routing, storage and analysis
• Lead the creation of custom reporting tools needed to extract and analyze financial and operational data. (KPI’s and dashboards)
• Interact with all levels of Management
• Support individual departments within the division while maintaining company objectives
• Develop and implement new system functionality to meet business requirements
• Prepare documentation and training for Customer Service procedures
• Take part in continuous improvement initiatives on an on-going basis throughout Customer Service

Education, Work Experience, Certification and/or Licensure:

• Bachelor’s degree in Business, Information Systems or related field from an accredited four year college or university
• 5-10 years’ of equivalent experience may be considered in lieu of a degree
• Understanding of data and its impact on downstream processes
• Experience with SAP, Teamcenter, Quantum and/or Business Objects/Crystal Reports preferred
• Familiarity with web-based support and materials management
• General understanding of business or aviation support processes required
• General understanding of software and financial integration

Knowledge, Skills and Abilities:

• Eager to learn and understand complex business processes
• Excellent verbal and written communication skills
• Ability to develop and implement new technical functionality to meet business requirements
• Ability to create and administer training to end users

Physical Requirements:

• Incumbents may be routinely exposed to equipment operational noise heat-cold-dust, and/or aircraft equipment, parts, or fuel odors
• Incumbents may be required to stand, sit, squat, walk, bend, climb ladders, move, reach, or stretch for prolonged time periods with no restrictions, as required by job duties
• Work in a safe and professional manner while adhering to all regulatory requirements (FAA, OSHA, DOT, EPA, State, and Federal regulations, etc.)
• Read, hear, speak, and see with no restrictions, as required by job duties
• Comprehend and adhere to management directions and/or safety instructions with no restrictions
• Effectively communicate in Business English language
• Pull, push, carry, lift, or move items up to 10 lbs. throughout the work shift without assistance, as required by job duties
• Pull, push, carry, lift or move materials/people/items/equipment weighing up to 50lbs. or more during the work shift, with the use of Company provided “reach assistance technology” or “movement assist technology” (fork-lifts, pallet jacks, pulleys, dolly’s, robotics reach equipment, people movers etc.), as required by job duties

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.

Job Number: 40733
Job Location: Greensboro, NC
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 11/28/2017

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aviation Cargo Care Representatives - Dallas, TX

Description:
STS AeroStaff Services offers Aviation Cargo Care Representative jobs in Dallas, Texas.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Duties:

• Assist Customers with all cargo inquiries received through the Cargo Customer Care Center
• Support the objectives of Cargo Management, Ground Operations
• Follows the Basic Principles of Leadership and leads by example in all management practices
• Entertain and qualify all calls to the Cargo Customer Care Center (CCCC), answering Customer inquiries on cargo policies and procedures
• Process booking requests for human remains shipments
• Process and respond to cargo claims and refund requests, both verbal and written
• Assist Customers and Cargo Agents with tracing cargo shipments
• Process new cargo account applications
• Support and assist Cargo Management with operational projects
• Provide support to the Area Managers with sales/marketing projects and Customer Relations as needed

Qualifications:

• High School diploma or equivalency required
• College course work or degree would be an asset
• Experience handling inbound telephone Customer Service and/or sales preferred
• Knowledge of air cargo policies and procedures would be an asset
• Ability to perform physical activities such as lifting, standing, sitting, driving, pulling, pushing, squatting, hearing, climbing, walking, kneeling, reaching, crawling writing, and speaking
• Ability to type and/or use a computer keyboard with sufficient speed and accuracy to meet demands of job
• Must be aware of hazardous situations and be able to handle emergencies as needed
• Must be able to comply with Company attendance standards as described in established guidelines
• Possess excellent organizational skills; including file maintenance and reporting
• Ability to solve problems by asking fact finding questions and utilizing multiple data sources
• Must be able to handle multiple situations simultaneously and difficult/demanding Customer Service issues
• Must communicate effectively by telephone
• Strong written communications skills
• Written communication (including email) must be professional in tone and audience appropriate
• Must be proficient in the use of current software, i.e. Microsoft Office (e.g., Outlook, Excel, Word, Access, and PowerPoint), Cargo point of sale system, Salesforce, etc.
• Must be able to utilize multiple applications simultaneously
• Must meet confidentiality expectations as to confidential, proprietary and sensitive Company information
• Must be available to work a variety of shifts
• Must be able to travel occasionally and work extended hours on an as needed basis
• Must maintain a well-groomed appearance
• Must be a U.S. citizen or have authorization to work in the United States as described by the Immigration Reform act of 1986

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.

Job Number: 40857
Job Location: Dallas, TX
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 12/07/2017

Bleed Air Designer (7 needed)

Description:
The Designer for BAS/VCS is responsible for providing design expertise in support of the Bleed Air System (BAS) and Vapor Cycle System (VCS) through all phases of project schedule including preliminary design, detailed design, development, certification, sustaining, production and product support.

Duties and Responsibilities:
1. Prepare 3D layout models of the BAS and VCS.
2. Prepare 3D installation and detail models of the BAS and VCS.
3. Prepare 2D installation, assembly and detail drawings of the BAS and VCS.

Education, Work Experience, Certification and/or Licensure:
1. Bachelors of Science in Aerospace or Mechanical Engineering from an accredited four year college or university program
2. Minimum 5+ years of directly related design experience in the development and certification of aircraft BAS and VCS.

Knowledge, Skills and Abilities:
1. Experience using CATIA V5 to prepare 3D parametric models and 2D drawings. Minimum of 10,000 hours.
2. Knowledge of one Product Life Cycle Management Tool (e.g. Teamcenter, Enovia,..)
3. Knowledge of 14CFR23 or 25 regulations and advisory circulars related to BAS and VCS regulations required and knowledge of Aircraft BAS and VCS.

Job Number: 28-024
Job Location: Greensboro, NC
Rate: Up to $60/hr, DOE
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 05/25/2018
Last Updated: 07/16/2018

Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Email: matt@precisionpersonnel.com
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CMM Programmer

Description:
Job Description: Provides numerical control, machining and programming technical experience. Establishes technical requirements for manufacturing and producibility. Plans, creates, verifies and revises Machine Control Data (MCD), geometry and documentation that directs the operations for a complete spectrum of numerically controlled equipment required to manufacture and inspect parts, tools and assemblies for departmental work. Plans and guides the development and integration of new machining techniques and manufacturing methods, processes, software and equipment. Works under general direction. NC Programmer with the following skills:
1. 1+ year experience using MetrologXG version software to program Coordinate Measurement Machine (CMM)
2. Preferred: Experience programming dual armed CMM using Metrolog software
3. Skilled in knowledge and interpretation of Geometric Dimension and Tolerancing (GDT)
4. 2+ years working with CATIA (or other Model Based Definition (MBD) software to access released engineering models and interrogate them for GDT and calculated measurements

Job Number: 17-19481
Job Location: Puyallup, WA
Per Diem: Split
Overtime: possible
Duration: 6 months
Start Date: 12/1/17
Input Date: 12/11/2017

Firm Name: ICONMA LLC
Attention: Constance Whitcomb
Address: 4620 E 53RD ST
City, State: DAVENPORT, IA 52807
Phone: 312/502-4795
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CNC Programmer IV

Description:
Location: Canoga Park, CA
Rate: $40.00 - $44.00/HR
Duration: 1 year contract (possibility of being extended longer)
Shift: 1st Shift

** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

Duties:
Required (MUST show this experience on resume):
** Siemens NX9-NX11 NC Programming experience is required **
** DMU Mori with Siemens 840D Experience ; Specifically DMU80 FD and DMU65 **
** Expertise in Lathe, Millturn, and 5 axis Mill programming of high temp alloy materials **
** Phone AND In-Person interviews are required. Candidates must be able to attend an in-person interview at their own expense **

- 50% - The NC Programmer is responsible for writing new CNC programs, setup instructions, estimating and making changes to existing CNC programs. Will develop, write and maintain NC programs for complex aerospace components using engineering models, drawings and specifications to support a zero defects machining operations environment. Selects program routines for the most efficient machining methods for each part. Will be involved in the prove out of new technology, first article inspection, fixture design, and day to day programming using Siemens NX9-NX11 CAM.
- 10% - Analyzes engineering models/drawings to define the sequence of machining operations to ensure that the design intent and component quality is achieved.
- 5% - Make proper cutting tool selections, taking into consideration such factors as materials, speeds, type of cutters, feeds and control system imitations.
- 10% - Use machine simulation and optimization software to troubleshoot/validate CNC programs and ensure highly efficient and 100% defect-free FTT machining processes.
- 10% - Modify existing parts programs for engineering changes or program improvements.
- 5% - Work closely with Machinists, Quality, Engineering, Management and other team members.
- 5% - Develop, write and maintain type II probe and logic macros to perform on machine touch probe measuring, fixture updates, cutter offset updates, and part feature data collection.
- 5% - Participate in knowledge sharing and cross training activity within the NC programming group.

Skills:
Required (MUST show this experience on resume):
** Siemens NX9-NX11 NC Programming experience is required **
** DMU Mori with Siemens 840D Experience ; Specifically DMU80 FD and DMU65 **
** Expertise in Lathe, Millturn, and 5 axis Mill programming of high temp alloy materials **

Preferred Requirements:
-NX Post Builder expertise
-NX Machine tool Configurator expertise
-Vericut Machine Builder expertise
-Fanuc custom macro programming expertise
-Siemens 840D macro programming expertise

Education:
-Bachelors degree or equivalent experience.

Job Number: 8013
Job Location: Canoga Park, CA
Rate: $40.00 - $44.00/HR
Per Diem: Possible
Overtime: Possible
Duration: 1+ yr
Input Date: 10/03/2017
Last Updated: 12/26/2017

Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CNC Programmer IV / MUST have Current and Strong NX Programming / local only URGENT CA

Description:
Job Title: CNC Programmer IV
Duties: ** Candidates must be U.S. Citizens **** Permanent residents are NOT eligible for this role **** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

Required (Please screen for these three items and make sure the experience is accurately reflected on resumes):
** Siemens NX9-NX11 NC Programming experience is required **

** DMU Mori with Siemens 840D Experience ; Specifically DMU80 FD and DMU65 **

** Expertise in Lathe, Millturn, and 5 axis Mill programming of high temp alloy materials **

** Candidates above the maximum bill rate will be considered. Please make sure that they are submitted at rates commensurate with their qualificaitons **

** Phone AND In-Person interviews are required. Candidates must be able to attend an in-person interview at their own expense **

50% - The NC Programmer is responsible for writing new CNC programs, setup instructions, estimating and making changes to existing CNC programs. Will develop, write and maintain NC programs for complex aerospace components using engineering models, drawings and specifications to support a zero defects machining operations environment. Selects program routines for the most efficient machining methods for each part. Will be involved in the prove out of new technology, first article inspection, fixture design, and day to day programming using Siemens NX9-NX11 CAM.

10% - Analyzes engineering models/drawings to define the sequence of machining operations to ensure that the design intent and component quality is achieved.
5% - Make proper cutting tool selections, taking into consideration such factors as materials, speeds, type of cutters, feeds and control system imitations.
10% - Use machine simulation and optimization software to troubleshoot/validate CNC programs and ensure highly efficient and 100% defect-free FTT machining processes.
10% - Modify existing parts programs for engineering changes or program improvements.
5% - Work closely with Machinists, Quality, Engineering, Management and other team members.
5% - Develop, write and maintain type II probe and logic macros to perform on machine touch probe measuring, fixture updates, cutter offset updates, and part feature data collection.
5% - Participate in knowledge sharing and cross training activity within the NC programming group.

Skills: Required (Please screen for these three items and make sure the experience is accurately reflected on resumes):

** Siemens NX9-NX11 NC Programming experience is required **

** DMU Mori with Siemens 840D Experience ; Specifically DMU80 FD and DMU65 **

** Expertise in Lathe, Millturn, and 5 axis Mill programming of high temp alloy materials **

Preferred Requirements:
-NX Post Builder expertise
-NX Machine tool Configurator expertise
-Vericut Machine Builder expertise
-Fanuc custom macro programming expertise -Siemens 840D macro programming expertise

Education: -Bachelors degree or equivalent experience.

Skills and Experience:
Required Skills:
SIEMENS
NC PROGRAMMING
LATHE

# of Positions: 1

Location:
Canoga Park, CA

Start Date: 10/30/2017
Estimated End Date: 10/30/2018
Hours Per Week: 40.00
Hours Per Day: 8.00

Schedule Notes: Regular 40 hour week. OT possible. This assignment could go for two years for the right candidate.

Job Number: MB-7352024
Job Location: Canoga Park, CA
Rate: 44/hr max
Duration: 12 month contract
Input Date: 11/20/2017
Last Updated: 12/26/2017

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Central Office Installer

Description:
Job Description:
• Install telecommunications equipment at customer sites.
• Equipment to install is Juniper, Cisco, Nokia
• Read, interpret, and implement job specifications.
• Run, secure, and terminate Fiber, DS3, DS1, and Power cable.
• Assemble frames, superstructure and miscellaneous hardware.
• Perform required testing of installed wiring using specifications and drawings.
• Label and stencil equipment and cabling.
• Install and connect basic AC wiring.
• Run and terminate DC power cabling.
• Experience with Stitching, Wire Lacing or Wire Wrapping
• Maintain satisfactory quality performance levels.
• Practice safe work habits.
• Timely and accurate completion of necessary operations paperwork (e.g. expense reports, time sheets, job documentation, etc.)
• Provide daily job status reports as requested.
• May be required to provide on the job training to other installation technicians.
• May be required to assume responsibility for successful completion of basic installation projects.
• Other duties as assigned.

Required Skills:
• Good manual dexterity.
• Ability to operate hand and power tools.
• Ability to read simple mechanical drawings.
• Ability to work independently and with others.
• Ability to lift up to a maximum of 25 pounds.
• Ability to climb a ladder.
• Professional appearance and manner.
• Good customer service and administrative skills.
• Ability to identify different colored wires.
• Valid driver’s license and reliable personal vehicle for travel to job sites.
• Ability to travel extensively (including overnight) both locally and nationwide.
• Own basic tools with the ability to use them as appropriate.
• Cell phone with data and unlimited talk plan.
• GPS for travel.
• Computer operation knowledge (Word, Excel, and test software).
• Ability to work day and/or night shift hours.

Job Number: 40638
Per Diem: Yes
Overtime: Yes
Input Date: 11/30/2017

Firm Name: PANTHER GROUP
Attention: John Sabbagh
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Chemical Engineer

Description:
Chemical Engineer
Location: Tulsa, OK
Duration: 12+ months
Rate: Open, DOE
Chemical Engineer Summary Statement:
Applies extensive knowledge of principles, theories and concepts related to Chemical Engineering.
Chemical Engineer Essential Functions and Key Responsibilities:
Develops solutions to a variety of problems of moderate scope and complexity.
Solves unusual problems that require moderate ingenuity and innovation related to chemical engineering, chemical formulations and manufacturing processes. Work is accomplished under general management direction. Applies extensive knowledge of chemistry and chemical engineering to design and develop transparency related aircraft products for military, executive, general aviation, or special purpose applications on operational aircraft. Researches and develops new and improved chemical manufacturing processes. Designs chemical plant equipment and devises processes for manufacturing. Determines most effective arrangement of operations such as mixing, conditioning, application, and testing of related polymer products. Develops, implements, and maintains chemical processes;calculates and organizes all data for complex process flow sheets including instrumentation and control considerations; models processes and units operations. Confers with management to ensure proper sequence of operation and prepares specifications and operating instructions for processing equipment. Services, troubleshoots, and solves engineering problems with processes or equipment already in operation. Ensures processes and procedures are in compliance with regulations.
Conducts tests and measurements throughout stages of production to determine control over such variables as temperature, density, pressure and viscosity. May function as Project Manager on large projects or significant portions of very large projects. Provides technical leadership and oversight to the assigned engineering staff. May represent the Company to current or prospective customers or vendors on technical matters related to the job assignment or technical specialty.
Chemical Engineer Ancillary Job Functions and Responsibilities:
Perform other duties as required. These duties may include assignments in job classifications other than the primary assignment.
Chemical Engineer Job Qualifications:
Formal Education, Training, Professional Certification and
Chemical Engineer Work Experience:
Experience may be substituted for the formal education and training requirements in this section at the discretion of management. Technical Bachelor level degree in Engineering or the sciences or equivalent and six(6) years related experience and /or training; or equivalent combination of education and experience.
Level of Supervision Required:
Works under general direction. Receives guidance as to results expected and to resolve complex problems. Exercises latitude in determining activities and approaches within moderate to wide parameters. Standard Job Requirements:
•Must be able to arrive at work on time, work on-site, and attend regularly.
•Must be able to read and write technically in the English language, perform appropriate mathematical calculations and learn to interpret and comprehend company policies, procedures, safety instructions, and other like documents used in an aerospace manufacturing environment.
•Competent in the use of standard software applications such as Microsoft Word and Excel and operate standard office equipment.
•Make telephone and direct personal contact with internal and external personnel and make formal presentations
Chemical Engineer
.•May perform work of lesser skilled employees.
Special Job Requirements:
Experience and working knowledge of the following:
•Polymerization and casting of liquid methyl methacrylatemonomer
•Catalysts and cross-linking agents
•Filtration of liquid monomers
•Mechanical properties testing of polymers
•Adhesion promoters and surface primers
•Polymer coating so Polysiloxane and other protective coating so Electrically-conductive coating so Optical coatings for projection screens. Special Training:
•Safety training applicable to the job and the general work area.
Physical Requirements:
While performing the duties of this job, the Stakeholder is regularly required to sit; use hands to finger, handle, or feel; and talk and hear. The Stakeholder frequently is required to move from one place to another and reach with hands and arms. The Stakeholder must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, and ability to adjust focus. Travel between facilities. Must be able to work in excess of eight (8) hours per day and five (5) days per week, if required. Must be able to ascend and descend stairs. Work Environment :Must be able to tolerate exposure to dust, fumes, noise, temperature and other elements in the shop area, if required. The noise level in the work environment is usually moderate.
Mental Requirements:
Able to work as a team member, highly organized, work well under stress and handle multiple priorities. Must possess interpersonal and communication skills to interact with other people inside and outside the company.
The Structures Company, LLC is an AA/EOE.

Job Location: Tulsa, OK
Rate: "open"
Per Diem: yes
Overtime: "possible"
Duration: 12+ month
Start Date: asap
Input Date: 12/04/2017

Firm Name: STRUCTURES COMPANY LLC
Attention: Mark Sharp
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Chief Aviation Inspectors - Inwood, NY

Description:
STS AeroStaff Services now offers Chief Aviation Inspector jobs in Inwood, New York.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Purpose:

To ensure the repair stations operations are conducted in accordance with the pertinent FAA Regulations, Quality Manual/Procedures, Customer Air Carrier Requirements and is designated with final airworthiness determination.

Job Duties:

• The Chief Inspector will have the final airworthiness authority for the release, as airworthy, of the units the repair station is rated to repair and maintain
• Responsible for ensuring all articles delivered to and maintained by the repair station are properly recorded and staged from receipt to delivery in their airworthy/serviceable condition
• Managing and delegating to the repair stations inspection staff ensuring the quality and production needs are maintained
• Perform, and have oversight of inspection personnel/activity, including Preliminary, Hidden Damage, In-Progress and Final inspections/RTS of aircraft articles processed by the Repair Station and assuring proper recording of results
• Ensure compliance with pertinent FAA regulations, manufacturer’s technical data/approved supplements, RSM/QCM and customer requirements
• Report all quality related issues to the QA Manager as soon as the Facility Manager is advised and ensure corrective actions are implemented
• Confirm that all equipment being maintained by the repair station is on the Capabilities List, the proper data is available and in use, the staff is properly trained and all records of work/release are complete/accurate
• Perform duties delegated by Quality Assurance Manager
• Directly responsible for the compliance with the FAA Approved training program manual; including indoctrination, initial, recurrent, ongoing, semi-annual, and specialized training
• Ensure any applicable Airworthiness Directive are posted and are being used and verify compliance with all other supplements, approvals, requirements
• Submit reports of defect or un-airworthy condition to the “Service Difficulty Reports”
• Assume all duties and responsibilities detailed in the RSQCM to include; calibration program, shelf life program, internal auditing, BER/scrap, work turn over, suspected unapproved parts, salvage parts program and incoming goods
• Performing semi-annual internal audit of the repair station and any approved contractors
• Coordinate with station manager inspection requirements
• Ensure and assist in all areas of the Safety Program and Zero Harm Program to ensure that they are fully enforced and by all employees
• Provide feedback/suggestion to improve customer satisfaction
• Communicate with customers and regulatory agencies during audits or visits
• Ensure system security of our FAA approved electronic recordkeeping system regarding their area/s of responsibility
• Maintain safe and clean work environment
• Overseeing the quality of products in accordance with monthly budgeted production goals
• Maintaining quality standard in accordance with the regulations, customer requirements and internal procedure
• Establishing a quality and compliance system which will result in no major audit finding
• Equipment rejection rates shall be at 98% or higher
• Maintaining positive MTTR
• Contributing to positive MOP by controlling wastes

Qualifications:

• 2+ years’ experience as a lead inspector or manager in related aviation field
• 5 years’ aviation related industry experience
• Confident personality with the ability to interface/communicate with the authorities and customers
• Experience in performing Audits
• Strong knowledge of FAA regulations and Part 145 requirements
• Appropriately certificated under Part 65 (A&P or FAA Repairman)
• Ability to work in a high activity/fast paced environment while managing associated stress
• Possesses excellent organizational skills and ability to work independently
• Organize responsibilities of the inspection staff and delegate duties to properly qualified inspection personnel
• Effectively execute training in accordance with the Approved Training Program and internal requirements
• Ability to make quality decisions and effectively solve problems
• Strong verbal and written communication skills, including the ability to facilitate meetings and effectively lead groups
• Ability to build and maintain effective working relationships with all levels of management and staff
• Ability to lift, pull, and push in excess of 65 lbs.
• Must be able to read, write and understand the English language
• Competent in reading and interpreting manuals, drawings, policies
• Good communication and punctuation skills
• Computer literacy and familiar with Microsoft office
• Ability to learn new software programs and systems

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.

Job Number: 40727
Job Location: Inwood, NY
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 11/28/2017

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Composites Tooling Engineer / CAD Creo or Solidworks CA

Description:
14307

Title Composites Tooling Engineer
45/hr max

Job Summary General Atomics Aeronautical Systems, Inc. (GA-ASI), an affiliate of General Atomics, is a world leader in proven, reliable remotely piloted aircraft and tactical reconnaissance radars, as well as advanced high-resolution surveillance systems.

We recognize and appreciate the value and contributions of individuals with diverse backgrounds and experiences and welcome all qualified individuals to apply.

We currently have an exciting opportunity for a Composite Tooling Engineer in our Airframe and Composite Design group in San Diego, CA.

DUTIES AND RESPONSIBILITIES:
•Provides expertise in tooling design for both large and small composite laminates including primary structure and control surfaces.
•Understands composite tooling theory and the selection of appropriate tooling material for the application and/or production volume required.
•Applies technical knowledge to analyze, investigate and resolve assigned engineering problems encountered on the production floor with regard to damaged tooling.
•Applies engineering principles effectively for design, development and sustaining engineering activities related to aircraft systems integration and installation.
•Documents findings, communicates results to engineering staff, makes technical presentations and may represent the organization as the prime technical contact on small identifiable projects.
•Advises management of work in progress, material availability and potential problems to ensure that personnel, equipment, materials and/or services are provided as needed.
•Person will be responsible for working with personnel throughout the company to help resolve any engineering related tooling issue that may impact the manufacturing delivery schedule.
•Responsible for observing all laws, regulations and other applicable obligations wherever and whenever business is conducted on behalf of the Company.
•Expected to work in a safe manner in accordance with established operating procedures and practices.
•Other duties as assigned.
•Exposure to various composite manufacturing processes and tooling concepts.
•Experience with Pro-E Cad software.
•Responsible for observing all laws, regulations, and other applicable obligations wherever and whenever business is conducted on behalf of the Company.
•Expected to work in a safe manner in accordance with established operating procedures and practices.

Qualifications Essential Qualifications Typically requires a bachelors degree, masters degree or PhD in engineering or a related technical discipline from an accredited institution and progressive engineering experience as follows; four or more years of experience with a bachelors degree or two or more years of experience with a masters degree. May substitute equivalent engineering experience in lieu of education. Must have a complete understanding of engineering concepts, principles, codes, and theory; experience demonstrating a broad application of those concepts; and, expanding knowledge of principles, concepts, theory, and practices in related technical specialties. Must possess the ability to understand new concepts quickly; apply them accurately throughout an evolving environment; organize, schedule, and coordinate work phases; and, determine the appropriate approach at the task level or, with assistance, at the project level to provide solutions to a range of complex problems. Must have excellent communication, computer, documentation, presentation, and interpersonal skills, ability to work independently and as part of a team; able to perform complex tasks in one engineering area; and, lead a team of less experienced professional employees on semi-routine tasks. Able to work extended hours as required. A Professional Engineering License is desirable.
Additional Qualifications Typically requires a bachelors degree, masters degree or PhD in engineering or a related technical discipline from an accredited institution and progressive engineering experience as follows; two or more years of experience with a bachelors degree. May substitute equivalent engineering experience in lieu of education.
•Must have an understanding of engineering concepts, principles, codes, and theory; experience demonstrating a broad application of those concepts; and, expanding knowledge of principles, concepts, theory, and practices in related technical specialties.
•Must possess the ability to understand new concepts quickly; apply them accurately throughout an evolving environment; organize, schedule, and coordinate work phases; and, determine the appropriate approach at the task level or, with assistance, at the project level to provide solutions to a range of complex problems.
•Must have excellent communication, computer, documentation, presentation, and interpersonal skills, ability to work independently and as part of a team; able to perform complex tasks in one engineering area.
•Background with various composite tooling design is preferred.
•Experienced with a CAD program; Creo, Solidworks, etc.
•Ability to present information to internal and external customers.
•Able to work extended hours as required.
•A Professional Engineering License is desirable.
City San Diego
State California
Travel Percentage Required 0% - 25%
Clearance Required? No
Work Schedule Rule 9/80
Temp Assignment Duration (# of Days) 180

Job Number: JE-14307
Job Location: San Diego, CA
Rate: 45/hr max
Duration: 6 month contract
Input Date: 01/30/2018
Last Updated: 02/22/2018

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Contract - Maintainability Eng III

Description:
Unique Skills:
Prior experience in development of Maintainability Predictions and analysis per MIL-HDBK-472, Human Engineering Design Guidelines per MIL-HDBK-759, Mean-Time-To-Repair (MTTR), assessing aircraft modifications for Maintainability impacts, CATIA V5 including Human Builder & Kinematics, and Reliasoft reliability & maintainability software are desired. Candidates with prior US military aircraft maintainer or air crew experience strongly preferred.

Education and Experience Requirements:
Bachelor’s degree in aviation maintenance, engineering technology, or a related curriculum; or an equivalent combination of education and experience sufficient to perform the essential functions of the job. A&P license preferred. Six (6) years of Maintenance Programs/Maintainability experience or aircraft maintenance and operational experience.

Position Purpose:
Responsible for participating in the planning, development, and sustainment of Aircraft Maintenance Programs and related issues regardless of complexity.

Principal Duties and Responsibilities:

Essential Functions: 1. Share responsibility for planning, developing, and sustainment of new and existing Aircraft Maintenance Programs and engineering projects of major complexity within established scope, meeting requirements of FAR 25.1529 or other applicable regulatory directives. 2. Maintain a current knowledge of developments in the field of specialty and/or other related aircraft fields and provide recommendations to department management for process/procedure changes to prepare for new standards and implementation of new methodologies. 3. Meet cost and schedule requirements while ensuring accuracy and consistency. 4. Develop standards and guides to support Maintenance Programs activities. 5. Mentor other team members in areas relative to Maintenance Programs processes and procedures. 6. Engage with internal/external stakeholders to ensure department deliverables are being met or exceeded. 7. Recommend innovations that improve collaboration, communication, quality, and/or effectiveness of product. 8. Review, and provide feedback on written work of team members. 9. Perform other duties as assigned.

Other Requirements: 1. Demonstrated in-depth knowledge of MSG-3 and Maintenance Review board (MRB) processes and methodology.

Job Number: 119581
Job Location: Savannah, GA
Per Diem: Possible
Overtime: Possible
Start Date: ASAP
Input Date: 02/14/2018

Firm Name: INTERGEN GROUP
Attention: Kim Mason
Address: 5051 PEACHTREE PKWY STE 200
City, State: PEACHTREE CORNERS, GA 30092
Phone: 678/318-1816
Fax Phone: 678/493-1467
Website: www.intergengroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Contract Administrative / Coordinator

Description:
Notes from Hiring Manager:

* This position will be supporting one of our client’s Security Solutions contracts
* Should have an administrative logistics background, preferably with defense / government / military contracts.
* Must be detail oriented with strong MS office skills, particularly Office and Excel (client currently has 2016 Excel software so must have experience with at least 2013; 2016 preferred)
* Need to have great communication skills as they will be dealing with both internal and external persons
* Strong organization skills as they’ll also be assisting with the Supply Chain Group
* Looking for the right personality fit; someone who can think / act on-the-fly & who’s not easily frustrated

Responsibilities:

> Organize and properly record archived files
> Filing/scanning hard copy files, data entry
> Research data / old files and properly organize / match
> Work closely with Supply Chain Group for deliveries, scheduling/planning of materials and other shipments as needed
> Assist with clerical tasks, i.e. shipping documents, completion sheets, etc….
> Provide additional admin support as needed

Experience:

> 5+ years of related work experience preferably with defense / government / military contracts
> Must be detail oriented and able to multi-task and prioritize
> Must be US Citizen w/ HS Diploma or equivalent; Associate / Bachelor degree in a related field is a plus
> Experience and familiarity with ITAR compliance is preferred
> Demonstrate reliability and strict confidentiality
> Excellent customer service demeanor to interact effectively with customers/vendors
> Work independently with limited supervision/consultation from superiors
> Demonstrate a working knowledge of Microsoft Office applications, especially Word & Excel (2013 or 2016)
> Understand and follow oral and written directions
> Plan and organize work to complete promptly, paying close attention to detail
> Strong attention to detail; excellent data entry and organizational skills; strong written and verbal communication skills

Take Care,

Mark A Ludwig
Vice President
Global American Staffing
Email: mludwig@globalams.us
Direct: (508) 434 – 6180
Office: (508) 230 – 5030 x123

Job Number: 040_2017
Job Location: Elkridge, MD
Rate: DOE
Per Diem: Split Possible
Overtime: Yes
Duration: 6-12+ Months
Start Date: ASAP
Input Date: 12/05/2017
Last Updated: 04/02/2018

Firm Name: GLOBAL AMERICAN STAFFING
Attention: Mark A Ludwig
Address: 12 HARDING ST STE 204-205
City, State: LAKEVILLE, MA 02347
Phone: 508/230-5030
800 Phone: 800/510-8050
Fax Phone: 508/923-0005
Website: www.globalamericanstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Contract Project Manager - Automotive - Vision Systems - Michigan area

Description:
Keltia Design, Inc. is a technical support services company in the supplying recruiting, training, and engineering design services to customers in the Automotive, Aerospace and other Hi-Tech industries on a permanent or contractual basis. We have been in business for over 17 years.

Our client has a range of openings in the area of Automotive Vision System Software Development. Experience with cameras, radars, ultrasonics, Deep Learning etc. is desired. The Project Manager must be a versatile, detail oriented person to assist managing a group of engineers and coordinate group activities to achieve delivery goals and targets in an efficient manner.

The Project Manager will facilitate the communication between the various engineering groups and ensure the customers requirements are being addressed.

It is important to be knowledgeable of the key elements of system, hardware and software engineering, have a great sense of detail, know how to take on various duties in a short time, and be able to take initiative when needed.

Requirements
a. Bachelor’s degree preferred. Computer Science, Computer Engineering or related.
b. Proficient with MS Office tools (Excel, WORD, MS Power Point, MS Project), Experience with cameras, radars, ultrasonics, Deep Learning etc. is preferable
c. Excellent interpersonal communication skills (excellent verbal and written skills).
d. Strong programming skill in high-level language

Please send an updated resume with pay requirements and availability. This is initially a contract role but there may also be the possibility to convert to a direct employee of the Client after this initial contract is complete

Job Number: KeltiaJ01217
Job Location: MI
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 12/18/2017

Firm Name: KELTIA DESIGN INC
Attention: John
Address: 2615 W CASINO RD UNIT 1A
City, State: EVERETT, WA 98204
Phone: 206/368-9812
Fax Phone: 206/237-8950
Website: www.keltia-design.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Contract Software Engineer - Automotive - Vision Systems - Michigan area

Description:
Keltia Design, Inc. is a technical support services company supplying recruiting, training, and engineering design services to customers in the Automotive, Aerospace and other Hi-Tech industries on a permanent or contractual basis. We have been in business for over 17 years.

Our client has a range of openings in the area of Automotive Vision System Software Development. Experience with cameras, radars, ultrasonics, Deep Learning etc. is desired. The Software Engineer must be a versatile, detail oriented person to assist in software design and development. The Software Engineer will be heavily engaged with engineering, program management, and customers. You must know the important elements of system, hardware and software engineering, have a great sense of detail, know how to take on various duties in a short time, and be able to take initiative when needed.

Responsibilities
a. Support software development planning.
b. Develop requirements, designs and implement the overall software structure of a project.
c. Verify that software design and coding meet the software and coding requirements.
d. Verify the accuracy and robustness of requirements and capability for validation.
e. Prepare software technical documentation as well as software design review materials.
f. Present materials at design reviews and be an active participant/team player at reviews.
g. Collaborate with system, hardware and software engineering peers to develop designs on aggressive time schedules when required.
h. Specify, design and code test tools using a combination of high level languages and hardware.

Requirements
a. Bachelor’s degree required. Computer Science, Computer Engineering or related.
b. Proficient with MS Office tools (Excel, WORD, MS Power Point, MS Project), Experience with cameras, radars, ultrasonics, Deep Learning etc. is desired
c. Excellent interpersonal communication skills (excellent verbal and written skills).
d. Strong programming skill in high-level language

Please send an updated resume with pay requirements and availability. This is initially a contract role but there may also be the possibility to convert to a direct employee of the Client after this initial contract is complete

Job Number: Keltia01217
Job Location: MI
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 6mo+
Start Date: ASAP
Input Date: 12/18/2017

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Controls Software Engineer - direct hire

Description:
JSG is looking for a Controls Software Engineer for our client in Monrovia, CA.

This is a DIRECT HIRE position.

Duties

Pre-sale conceptual design, schedule, and cost estimation of software for semi-automated industrial laser, resistance welding, and vision processing workstations.
Real-time graphical user interfaces for the human machine interface that integrate system operation, motion controllers, resistance welders, laser programming and control, machine vision (Cognex, Keyence), data collection and analysis, file management, and networking capabilities.
Structured, re-useable low-level motion control system code for Delta-Tau and Aerotech motion systems implementing control system, motor tuning, and I/O functions.
Use and creation of dynamic link libraries for selected software-controllable systems components such as: data acquisition and controls, motion controllers, visions systems, lasers, data collection and report generators.
Manufacturing floor automation connectivity software including LAN, database, and other standard interfaces and protocols
Provide support for system acceptance testing conducted by project managers
Work in a team environment with other engineers, production, QA, test, materials control, contract management, and sales personnel
Develop new software under the guidance of the Systems Engineering Project and Planning Manager and Systems Engineering Services Managers needs
Prepare requirements document based on interview with customer and hardware engineers
Prepare interface and functionality documentation for software modules
Develop project plans and schedules for software development work.
Report on progress, demonstrations, and changes to scope
Provide detailed documentation for engineering release and troubleshooting.
Provide manuals for customer operation.
Requirements

PMAC / PeWin32 experience or similar motion controller and integrated development environment experience
Development with Programmable Multiple Axis-Controllers, Aerotech controls, or similar motion controllers is a MUST
Completely knowledgeable in software design tools and environments including: .NET, Visual C++, C#, MFC library, Windows OSs, networking, Vision Pro, and MS Access
Current Experience in C# is preferred.
Strong fundamental background in Software Engineering is a MUST!
Design for long term support and modification
Professional software design and documentation control methodology
Four year degree in computer science, engineering, physics, or related discipline
• Three years+ experience in designing custom motion control and HMI software
• Three years+ experience in designing

Job Number: 361964
Job Location: Monrovia, CA
Rate: $115k/yr
Per Diem: no
Overtime: possible
Duration: Direct Hire
Start Date: asap
Input Date: 11/22/2017
Last Updated: 01/19/2018

Firm Name: JOHNSON SERVICE GROUP
Attention: Rich Martinsen
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Customer Service & Support Admins - Chicago, IL

Description:
Now Hiring Customer Service & Support Admins!

Overview:

STS AeroStaff Services is now offering Customer Service & Support Admin jobs in Chicago, Illinois. To learn more, check out the following information.

Are you tired of working the same dead-end contract positions? If so, STS AeroStaff Services offers the best customer service jobs in Chicago, Illinois; positions that will reward your skills with competitive compensation and benefits. When it comes to your career as a Customer Service & Support Admin, don’t just wing it. Let STS AeroStaff Services help you fly your career forward!

At this point in the post, you can read on, apply online or contact an STS Recruiter at 1-877-707-5767.

Essential Duties & Responsibilities:

• Provides friendly service to and maintains positive relationships with all internal and external Customers
• Works in a cooperative spirit to ensure the success of our Company
• Performs secretarial and administrative duties for Leadership and staff under minimal supervision
• Answers calls, relays and takes messages, transfers calls, provides assistance to callers, screens calls and places calls for management
• Maintains department personnel files and paperwork
• Organizes and maintains payroll file room and coordination of timely rotation of files to off-site storage facility
• Orders supplies using established Company vendors and ordering methods
• Opens, sorts, screens and responds to incoming mail
• Composes, types and edits correspondence
• Compiles data and prepares special reports; gathers and summarizes data
• Makes arrangements for meetings and luncheons as directed by the department Leadership Team
• Maintains appointment calendars for management
• Arranges travel and accommodations for management and staff
• Establishes meeting times, secures location and contacts attendees
• Establishes and maintains files and other information for reference and control purposes
• Prepares confidential paperwork regarding performance appraisals, promotions and other people-related issues for management
• Maintains invoice and budget files and assists in the compilation of variance reports
• Operates computer equipment utilizing word processing, spreadsheet, data base management and presentation software
• Some data entry may be required
• Operates copy machine, FAX equipment and other standard office equipment
• May perform other job duties as directed by Leadership
• Must be able to meet any physical ability requirements listed on this description
• May perform other job duties as directed by Employee's Leaders

Qualifications:

• High School diploma or equivalency required
• Previous analytical/technical experience preferred
• Must provide friendly service to and maintains positive relationships with all internal and external Customers
• Operation of multi-line telephone with courtesy and sufficient speed
• Ability to operation copy machine, FAX machine and other standard office equipment
• Open, sort and screen incoming mail
• Must master computer software applications such as Outlook, Quickbase, Microsoft Word, Excel, PowerPoint and Access
• Must have sufficient ability to handle and resolve office administration tasks
• Must be able to perform mathematical computations
• Must possess excellent organization skills including establishing and maintaining files for reference and control purposes
• Must work under tight time constraints including meeting unforeseen deadlines to accomplish assignments and projects
• Must be able to effectively communicate verbally, by telephone and face to face
• Must have ability to keyboard with sufficient speed and accuracy to meet the demands of the job
• Must be able to read documents, follow instructions, learn and understand office procedures
• Must compile data and prepare special reports
• Responsible for making arrangements for meetings and luncheons and handle travel arrangements as necessary
• Responsible for the payroll records for the entire Department, including Incentive Passes
• Must have ability or must gain ability to use SWEEP for ordering department supplies
• Must be able to work varying schedules and work weekends as required
• Must be able to work occasional overtime, as necessary
• Must be able to comply with Company attendance standards as described in established guidelines
• Must meet confidentiality expectations as to confidential, proprietary and sensitive Company information
• Must maintain a well-groomed appearance per Company appearance standards as described in established guidelines
• Must be a U.S. citizen or have authorization to work in the United States as defined by the Immigration Reform Act of 1986

Company Overview & Benefits:

STS AeroStaff Services works with the largest names in the aviation industry. We offer hundreds of career opportunities throughout the United States, and with more than two decades of experience, our aviation Recruiters soar in their commitment to excellence and professionalism.

We proudly offer all qualifying candidates competitive rates, direct deposits, medical insurance, cash advances and referral bonuses. Have questions? Contact us today at 1-877-707-5767.

Job Number: 40810
Job Location: Chicago, IL
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 12/04/2017

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Customer Support Security Specialists - Orlando, FL

Description:
STS AeroStaff Services now offers Customer Support Security Specialist jobs in Orlando, Florida.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Duties:

• Performs variety of activities in support of functional areas such as finance, purchasing, or human resources or for a specific project/business/technical unit
• Gathers, collects, records, tracks and verifies data and information from multiple sources
• Compiles, reviews and analyzes data. Uses software for functional area, to compile and generate reports, statistics, timelines, tables, graphs, correspondence and presentations
• May design processes to enhance work flow
• Provides data and information to others on functional unit processes and procedures

Qualifications:

• High School Diploma, plus 1 year of administrative experience

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.

Job Number: 40764
Job Location: Orlando, FL
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 12/04/2017

Database Administrator - Top Secret, Richardson TX 75082

Description:
PDS Tech, Inc. is seeking a Database Administrator in Richardson, TX 75082
Must have Top Secret security clearance
12 month contract

This role is to support the Instructional Systems Design (ISD) Integrated Product Team in developing AAS curricula. The DBA shall have experience at designing, developing, implementing and maintaining databases. The DBA shall have advanced SQL/Oracle database administration knowledge and be able to write scripts and query the system without assistance. The DBA must have and maintain a Top Secret security clearance.
Responsibilities include:

Maintaining the AAS Advisor database containing multiple syllabi.
Developing, planning and establishing database performance baselines; monitoring performance trends to identify and correct problems; and customizing existing applications for the life of the project.
Troubleshooting to assure curricula integrity, security, configuration management, and version control.
Writing scripts to query database and generate customer reports.
Collaborating with architects and technical specialists to identify proper hardware and software implementations.
Planning, installing and testing software upgrades and patches.
Implementing database security infrastructure and manages user accounts.
Working closely with IT project managers, database programmers, and multimedia programs to develop and implement the customer’s learning management system.
Preparing database documentation, including standards, procedures and definitions for the data dictionary (metadata).
Assist the Instructional Systems Design (ISD) team in developing various instructional artifacts.
Participate in program reviews and meetings with the ISD team.

A Top Secret security clearance with a single scope background investigation (SSBI) is required for this task.

Job Number: 1710070223
Job Location: Richardson, TX
Duration: 11 months
Input Date: 06/30/2017
Last Updated: 07/17/2018

Firm Name: PDS TECHNICAL SERVICES
Attention: Todd Brown
Address: P O BOX 619820
City, State: DALLAS, TX 75261-9820
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9636
Email: cecjnrt@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002CqcXAAS&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Checker

Description:
1. Review 3D engineering data for conformance to requirements as directed.
2. Check parts for fit, form and function to the extent that information is available.
3. Must have experience in Product Lifecycle Management (PLM) processes and tools, checking CATIA v5 , SmarTeam, as well as other CAD datasets, in accordance to requirements as directed.

Checkers are responsible for determining the acceptability of data in the following areas:
1. Accuracy and completeness of engineering product definition data, including CAD and PDM data.
2. Proper application and compliance with all Engineering and customer drawing requirements.
3. Use and understanding of GD & T a must.
4. Dimensioning and tolerancing including familiarity with ASME Y14.5.
5. Application of best drafting and design practices and procedures.
6. Applies extensive and diversified knowledge of industry fabrication practices for aircraft parts.
7. Advise Design personnel regarding company drawing and design practices and procedures.
8. Maintain a current and up-to-date knowledge of developments in the structures/systems design disciplines drawing/data requirements, as well as all interrelated disciplines of design build teams.
9. Assist in the research and development of Product Data Management (PDM)/Computer Aided Design (CAD) applications and methodologies for Engineering and when necessary, other departments.
10. Actively works to improve daily processes and ensure that all Data Integrity work and CAD and PDM solutions meet customer requirements.
11. Knowledge of company parts list & PdocM, a plus.
12. Knowledge of CHS, EWIS, Electrical harness Design a plus but not required.

Essential Duties and Responsibilities
1. Checks designs of complex mechanical aircraft interior furnishing, structures, and/or systems.
2. Ensures designs meet customer criteria, quality standards and FAA requirements.
3. Adheres to budget and project schedules.
4. Provides design guidance and feedback to other engineering personnel.
5. Other duties as assigned.
6. Knowledge of industry design and documentation standards.
7. Experience with mechanical assemblies and manufacturing technique design.
8. Ability to work independently and cross-functionally.
9. Experience in communicating with employees/teams in productive and efficient manner. • Strong communication and problem-solving skills.
10. Knowledge of Excel, Share Point software, Microsoft Office a plus

Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 5 ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Job Number: 24-191
Job Location: Savannah, GA
Rate: $50.00 - $55.00
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 09/25/2017
Last Updated: 02/06/2018

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer

Description:
Design Engineer to support our engineering team delivering highly complex electro-mechanical, mechanical, and pneumatic components and systems for flight actuation applications to our Defense Sector customers.

Essential job functions:
• Perform conceptual design, analysis, assembly/detail drawing creation in NX, and test planning for complex control hardware used on military aircraft
• Validate conceptual problem solutions through trade studies and by applying sound engineering principles
• Perform engineering calculations related to sizing, performance, tolerance and assembly
• Participate in the evolution of conceptual design, technical project planning, detail design, and development testing throughout the program lifecycle
• Create reliable designs through a comprehensive experimental development test program
• Document designs, analyses, and test results with accurate and concise reports
• Team-oriented, with the desire to participate in and contribute to a high functioning team
• Self-starter with strong analytical skills and a desire for constant improvement

Required skills:
• 6+ years of design and development engineering experience
• Proficient in current versions of NX/UG computer-aided design software, 2 years experience minimum
• Good sense of three-dimensional spatial orientation and knowledge of mechanical hardware design
• Proficient in assembly/detail drawings, GD&T, and dimensional tolerance analysis

Education:
• Bachelor’s degree in Mechanical or Aerospace Engineering or related technical field

Job Number: 52852
Job Location: Salt Lake City, UT
Rate: Open
Per Diem: Yes
Duration: 6 months plus
Start Date: ASAP
Input Date: 12/06/2017

Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Rich Nguyen
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD
City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer II

Description:
Position Summary: This position will work with the engineering team and will ensure the successful integration of each design element with the product as a whole. This individual will work both independently as well as part of the larger engineering team. Tasks will include the development of aircraft structural layouts and the design of individual components, assemblies, and installations. Engineering materials will include metals, nonmetals, and composite structural materials. Tasking may also include design and integration of aircraft mechanical systems, hydraulic systems, electrical systems, environmental control systems and a variety of other equipment and systems as needed. Specific duties and responsibilities include but are not limited to the following:

Essential Duties and Responsibilities:

The Design Engineer II will work with minimal intervention and must rely on experience and judgment to plan and accomplish goals while performing a variety of complex tasks in the following areas:

Applies standard engineering practices and techniques, including innovative methodology, to provide effective solutions to problems involving a wide number of variables.

Able to ensure the selection and application of materials and processes are appropriate to each design element with the ability to generate and/or revise specifications when necessary.

Compose compliance matrix to meet customer specification requirements.

In-depth knowledge of standard concepts, practices, and procedures within a specified engineering field.

Proficiency utilizing CATIA V5 engineering design software.

Works on problems of complex scope where analysis of situation or data requires a review of identifiable factors to determine appropriate action.

Ability to guide, mentor and advise other design engineering staff.

Creativity and latitude is expected.

Participate in a variety of process improvement projects.

Able to support design reviews with timely and relevant information and understanding.

Performs other duties as required.

Qualifications & Skills Requirements:

Requires a BSME, BSCE, BSAE, or a Bachelor’s degree in a related engineering field and a minimum of 5-9 years of experience in the Aerospace Industry or in a related field.
Requires proficiency using CATIA V5 and must be highly competent using MS Office products.

Physical Requirements: Individual must be able to sit for extended periods of time, working at a desk and/or attending meetings. May occasionally require employee to stand and/or walk and occasionally lift and/or move up to 10 pounds. Will need to be able to move throughout the office and talk/hear or otherwise communicate with other employees and management. Work will be performed in an office environment. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential duties of the job.

LMI is an equal employment opportunity employer. Consistent with applicable law, LMI provides access and opportunities to those with disabilities. This includes providing reasonable accommodation to individuals with disabilities and disabled veterans who seek to access the company’s online application system. If an applicant is unable to fully access the online application system, LMI will provide a reasonable accommodation. Applicants with disabilities may contact us at 636-916-2400 for assistance accessing the on-line application system. Callers should have a detailed description of the requested accommodation, their name and preferred method of contact ready for LMI‘s Human Resources Department. LMI will make every effort to respond within two (2) business days. This phone number is not for the general submission of application materials.

LMI is an E-Verify Employer.

LMI is an Equal Employment Opportunity/Affirmative Action/Disability/Veterans Employer

Click the link and follow instructions on HOW TO APPLY: LMI ENGINEERING JOB OPPORTUNITIES

Job Number: R0003247
Job Location: Multiple, WA, CA, TX
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 4 months+
Start Date: ASAP
Input Date: 11/30/2017

Firm Name: LMI AEROSPACE
Attention: Human Resources
Address: 4838 RONSON CT STE R
City, State: SAN DIEGO, CA 92111
800 Phone: 800/677-7868
Website: www.lmiaerospace.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer NX UT

Description:
Request number: 5051
Job title: Design Engineer

Number of openings: 1
Position location: Salt Lake - UT
Employment type: Contract
OT exempt: No
Shift: 1st
Education Requirement: BS/BA
Driving on company time?: No
Minimum Years of Experience: 6 years Maximum
Hourly Pay Rate: 60
Start Date: 12/04/2017
Tentative End Date: 06/04/2018

Job Description
Function: **This position is a 6-12 month contract with potential of transitioning to full time direct employment.**

Moog Space and Defense Group in Salt Lake City is looking for a Design Engineer to support our engineering team delivering highly complex electro-mechanical, mechanical, and pneumatic components and systems for flight actuation applications to our Defense Sector customers. A Design Engineer at Moog will contribute to design support of some of the most sought after missile systems in the defense industry.

Essential job functions:
• Perform conceptual design, analysis, assembly/detail drawing creation in NX, and test planning for complex control hardware used on military aircraft
• Validate conceptual problem solutions through trade studies and by applying sound engineering principles
• Perform engineering calculations related to sizing, performance, tolerance and assembly
• Participate in the evolution of conceptual design, technical project planning, detail design, and development testing throughout the program lifecycle
• Represent Moog in a manner consistent with its leading-edge technical reputation
• Create reliable designs through a comprehensive experimental development test program
• Document designs, analyses, and test results with accurate and concise reports
• Team-oriented, with the desire to participate in and contribute to a high functioning team
• Self-starter with strong analytical skills and a desire for constant improvement
Required skills:
• 6+ years of design and development engineering experience
• Proficient in current versions of NX/UG computer-aided design software, 2 years experience minimum
• Good sense of three-dimensional spatial orientation and knowledge of mechanical hardware design
• Proficient in assembly/detail drawings, GD&T, and dimensional tolerance analysis

Education:
• Bachelor’s degree in Mechanical or Aerospace Engineering or related technical field

Job Number: JE-5051
Job Location: Salt Lake City, UT
Rate: 60/hr max
Duration: 6-12 month contract with potential of transitioning to full time direct employment
Input Date: 12/13/2017
Last Updated: 01/02/2018

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Alabama, Tucson or Texas locations
FPGA and Digital design experience
Senior Designer or Electrical Engineer with understanding and wide application of technical theories, and concepts in digital design, with general knowledge of other related disciplines. The Senior Designer provides technical solutions to a wide range
of difficult problems. This position will function in a multi-disciplined design team. The person will be the Responsible Engineering Authority (REA) for hardware design, fabrication, assembly, test, and integration of a circuit card. Designs include technology of processors, FPGAs, memory, and industry interfaces, such as PCIe, Ethernet, I2C, UART. Candidates can independently determine and develop approach to solutions to contribute to the completion of specific programs and projects.

Required Skills:

• A minimum of 4 years’ experience in Digital Design

• Proven ability to take a design concept from the block diagram or requirements level and develop a complete hardware design

• Experience with PCB design tasks and proven ability to use tools to design (schematic capture), analyze and simulate designs prior to hardware execution.

• Experience with embedded test techniques, design for test, design margin analysis and circuit design for production

• A strong advocate for process improvement

• A self-motivated and effective communicator

• Experience in managing schedule and resources to meet assigned milestones

• Ability to obtain and retain security clearance

Desired Skills:

• Experience using Mentor Graphics Design Creation tools: DxDesigner, xDX Designer VX, and Constraint Editor System (CES)

• Experience using Mentor Graphics PCB electronic circuit design software: HyperLynx signal integrity, power integrity, and analog simulation, Xpedition Enterprise (xPCB)

• Six Sigma specialist

Required Education (including Major):

Bachelor’s Degree in Electrical Engineering (MS preferred) or similar degree and meets the experience requirements

Job Number: 38760
Job Location: Huntsville, Al
Duration: 18 months
Start Date: ASAP
Input Date: 12/06/2017

Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Rick Nussbaum
Address: 1700 WELLS RD STE 1
City, State: ORANGE PARK, FL 32073-2373
Phone: 904/562-3215
800 Phone: 866/277-3343
Fax Phone: 904/713-2000
Website: www.apollopros.com

Electrical Engineer

Description:

PDS Tech, Inc. is seeking an Electrical Engineer for a position located in Kansas City, MO.
Must hold an active clearance (preferably a DOE Q, or could be a DOD TS).

The Client's organization has several open opportunities for Electrical Engineers. We are seeking engineers who are interested in supporting one or more of the following areas: electrical and/or electronic components and major assemblies; discrete and custom devices; complex cables; RF/radar/antenna devices and components; test equipment hardware and/or software; test & controls; purchased and COTS products; control account management.

Performs project planning and manages project resources, including multiple individuals and disciplines, to achieve quality, delivery, and cost objectives.
Conducts research and development experiments to resolve complex engineering and quality problems involving highly technical, scientific methods.
Writes technical reports on results and conclusions drawn from experiments conducted and incorporates findings in formal specifications.
Translates design agency concepts into production items by coordinating the activities of engineering, quality, manufacturing, and related organizations.
Estimates set-up times, flow times, costs of production and acceptance equipment, and compiles cost estimates and delivery quotations, monitors performance, and prepares reports, statistics, and recommendations for management review.
Contributes to business growth through the pursuit of new technology; participates in establishing operating procedures on new products and components.
Defines and recommends new designs, design changes, and alternate designs of instruments, and test equipment, and orders tooling, gaging, and equipment necessary to assure product quality.
Plans and performs engineering testing and development programs and uses advanced statistical and scientific methods to address and resolve critical engineering and production problems to assure product manufacturability.
Originates, refines, and releases complex manufacturing or inspection work directions.
Determines acceptability of processes and materials in conjunction with customers, design agency, quality, and other affected organizations.
Interacts with customers, design agency and/or supplier counterparts to resolve moderate to complex design, development, production and acceptance issues.
Based on research, applies, develops and recommends innovative methodologies and technologies which are equal to the industry's state of the art to resolve processing and design problems.
Provides technical consultation to management and others, and leads technical project teams.
Responsible for work that may involve longer range and/or complex business objectives in field of expertise.
Evaluates and implements innovations and technological advances that improve quality, reduce flowtime, improve productivity, and enhance operational surety.
Performs highly complex calibration and measurement services, recommends changes in calibration procedures to improve services, and solves special measurement problems.
May perform other duties as required.
Conducts activities in a safe and healthy manner and works in accordance with established HS&E requirements to ensure the protection of employees, the public, and the environment. Takes actions necessary to "stop" work when an unsafe condition or action is identified. Every employee has the right and responsibility to stop work when unsafe conditions or actions are identified.

Basic Qualifications:

US citizenship in order to obtain and maintain US Dept of Energy "Q" level security clearance.
Bachelor of Science degree in Electrical Engineering from an ABET accredited program or an equivalent ABET accredited engineering degree.
Minimum two (2) years directly applied engineering experience.

Additional Qualifications:

Five (5) or more years directly applied engineering experience in a technology and/or manufacturing environment preferred.
Advanced degree in an engineering, physics or business discipline is advantageous.
Six Sigma certification (black belt; green belt) preferred.
Experience/history reflective of executing continuous improvement toward products and/or processes.
Technical project management experience.
Experience/familiarity with enterprise resource planning and/or earned value management systems.
Experience presenting technical material to varied levels of audiences.
Willingness to travel up to 25% of time.

Job Number: 1710068676
Job Location: KS City, MO
Duration: 6 months
Input Date: 05/25/2017
Last Updated: 07/17/2018

Firm Name: PDS TECHNICAL SERVICES
Attention: Tanya James
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002Jr0WAAS&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Level 3

Description:
Electrical Engineer - Level 3

Duration: 1 year contract
Pay Rate: DOE ($50/hr - $55/hr)
Location: Grand Prairie, TX
Shift: First, 9/80
*The engineer must have an active SECRET security clearance and it is preferred that the employee's investigation is in scope (investigation performed within the past 5 years)*

Job Description:
-Analog engineer is required to design a power voltage card to convert voltages between mature subsystems.
-The power voltage card will need to fit within an existing space.
-This effort will require part selection, design review, and design release.
-The engineer must have an active SECRET security clearance and it is preferred that the employee's investigation is in scope (investigation performed within the past 5 years).
-The engineer must be proficient in Cadence; have good communication skills.

Mandatory Skills:
-Must have an active SECRET security clearance and it is preferred that the employee's investigation is in scope (investigation performed within the past 5 years).
-Bachelors degree in Electrical Engineering with five or more years of experience.
-Must be willing to accept a wide variety of work assignments supporting the total end-to-end process of capturing, designing, developing, testing, manufacturing, and life-cycle support of electronic systems.
-Must possess strong general electrical engineering knowledge and be familiar with circuit design and components to include electronics testing and troubleshooting.
-Experience in electronic system and subsystem design and test, systems analysis, software-driven operations and test schemes.
-Strong electronic systems integration tasking, estimating, testing and excellent trouble shooting skills.
-Proficiency with electronic analyzers and other trouble shooting tools is required.
-Ability to develop system and subsystem performance requirements.
-Ability to use test equipment to support acceptance testing, manufacturing production and in-process testing, data processing and analysis.

REQUIRED Skill Matrix:
-Power regulation circuit design experience. Schematic entry. PSPICE analysis. Derating analysis. etc. : (9-10 years)

Job Number: 7065
Job Location: Grand Prairie, TX
Rate: 50.00-55.00
Per Diem: Possible
Overtime: Yes
Duration: 1 year
Start Date: ASAP
Input Date: 02/14/2017
Last Updated: 12/26/2017

Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer-Tucson, AZ - McKinney, TX - Huntsville, AL

Description:
Job Description:
Senior Designer or Electrical Engineer with understanding and wide application of technical theories, and concepts in digital design, with general knowledge of other related disciplines. The Senior Designer provides technical solutions to a wide range
of difficult problems. This position will function in a multi-disciplined design team. The person will be the Responsible Engineering Authority (REA) for hardware design, fabrication, assembly, test, and integration of a circuit card. Designs include technology of processors, FPGAs, memory, and industry interfaces, such as PCIe, Ethernet, I2C, UART. Candidates can independently determine and develop approach to solutions to contribute to the completion of specific programs and projects.

Required Skills:
• A minimum of 4 years’ experience in Digital Design
• Proven ability to take a design concept from the block diagram or requirements level and develop a complete hardware design
• Experience with PCB design tasks and proven ability to use tools to design (schematic capture), analyze and simulate designs prior to hardware execution.
• Experience with embedded test techniques, design for test, design margin analysis and circuit design for production
• A strong advocate for process improvement
• A self-motivated and effective communicator
• Experience in managing schedule and resources to meet assigned milestones
• Ability to obtain and retain security clearance

Desired Skills:
• Experience using Mentor Graphics Design Creation tools: DxDesigner, xDX Designer VX, and Constraint Editor System (CES)
• Experience using Mentor Graphics PCB electronic circuit design software: HyperLynx signal integrity, power integrity, and analog simulation, Xpedition Enterprise (xPCB)
• Six Sigma specialist
Required Education (including Major):
Bachelor’s Degree in Electrical Engineering (MS preferred) or similar degree and meets the experience requirements

**Must be able to obtain/maintain a Secret clearance - Can start without

Multiple locations-
Tucson, AZ - McKinney, TX - Huntsville, AL

Job Number: NH
Job Location: Hunstville, AL
Input Date: 12/07/2017

Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Gina Smith
Address: 7310 RITCHIE HWY STE 400
City, State: GLEN BURNIE, MD 21061-3092
800 Phone: 866/277-3343
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Power System Engineer

Description:
• System Certification Requirements: Cert Plan, Flight Test Plan, Flight Test Report, Qual Test Report, Lab test report, Testing requirements/Flight Clearance and or SOF Requirements, development testing
• Hardware Qualification: Plans, procedures, Reports, conformity, ATP & Outline Drawings
• Software Certification: Experience reviewing PSAC, CIA, SAS.
• Experience in software V&V.

Required Experience in the following:
• Electrical Power Generation, control and indicating
• Secondary Power Distribution, control and indicating
• Solid State Electrical Power.

Desired Experience in the following:
• Working Knowledge ARP4754 and CFR 25
• Project Management

Skills/Experience:
• Configuration change management

Job Number: 24-174
Job Location: Savannah, GA
Rate: $58 - $63
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 09/25/2017
Last Updated: 02/06/2018

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
ElectroMechanical Engineer - Level III

Description:
ElectroMechanical Engineer - Level III

Orlando, FL
$53.00/Hr
1 Year Contract

MUST HAVE AN ACTIVE SECRET CLEARANCE

1st Shift

Description

Hardware ElectroMechanical packaging design engineer will be responsible for the hardware development for missile and/or fire control electronics: specifically printed wiring board (PWB) and circuit card assembly (CCA) design as well as general packaging support. Activity will require cross functional coordination to complete PWB/CCA hardware design and integration for the designated weapon system. General qualifications: Researches, develops, and designs component, equipment, and networks for military applications. Candidate must have experience CCA and PWB design as well as the associated components and connectors.

Skill/Experience/Education

Mandatory:

Candidate must have a Bachelors degree from an accredited college in a related discipline, Proficient with Pro-E and/or Creo or Catia software.

Desired:

CREO,

Job Number: 7719
Job Location: Orlando, FL
Rate: 53.00/Hr
Per Diem: Possible Split
Overtime: Possible
Duration: 1 Year
Start Date: ASAP
Input Date: 10/23/2017
Last Updated: 02/05/2018

Firm Name: INCONEN CORPORATION
Attention: Brad
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Embedded S/W Engineer - Level 2 (6) - TX - C

Description:
Chipton-Ross is seeking a Embedded S/W Engineer - Level 2 (6) for an opening in Grand Prairie, TX.

RESPONSIBILITIES:
Client's Tactical Missiles Advanced Programs area is seeking Software Engineering candidates to perform development associated with the following program product lines: Tactical Missile System (TACMS), Army Tactical Missile System (ATACMS), and Guided Multiple Launcher Rocket System (GMLRS). Software engineering effort will be to implement Operational Flight Software (OFS), Operational Test Software (OTS), and Launcher Simulation/Emulator Software updates.

Skills required are real time programming, including experience with the vxWorks real time operating system, inertial and GPS navigation applications, and Ethernet communication protocol. Preferred skills and experience include use of the GNAT Ada compilation system, C/C++, Wind River Workbench development environment, Power PC experience, including use of an In-Circuit Emulator, and the Razor configuration management data base system.

BS in Computer Engineering, Computer Science, Software Engineering, or Related Field C/C++, ADA, Real Time Software Development, Wind River Workbench, Power PC Development, vxWorks, Inertial & GPS navigation unit experience

PREFERRED EXPERIENCE:
Software configuration management tool experience, Razor

EDUCATION:
BS in Computer Engineering, Computer Science, Software Engineering, or Related Field C/C++, ADA, Real Time Software Development, Wind River Workbench, Power PC Development, vxWorks, Inertial & GPS navigation unit experience

WORK HOURS:
9/80, 1st Shift, Full-Time

MISCELLANEOUS: Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

Job Number: 165908
Job Location: Grand Prairie, TX
Rate: Up to $80.73 DOE
Duration: 12 Months
Input Date: 10/17/2017
Last Updated: 07/17/2018

Firm Name: CHIPTON ROSS
Attention: Max Cameron
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: mcameron@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer

Description:
US DOD Secret Clearance Required

C/C++, COTS SBC, Linux (Red Hat), VxWorks, Git, J1939 or CANBus Experience, Eclipse, Embedded SW Engineering, And Ground Vehicles and Autonomy

Driver Development, Python, ROS, CODESYS

Job Number: 40247
Job Location: TX
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 12/07/2017

Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer

Description:
Can start without Clearance - must be eligible for a secret

Software documentation experience Software verification experience

C/C++ programming
Embedded Software
Hardware/Software Integration

Job Number: 40529
Job Location: PA
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 12/07/2017

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer

Description:
ACTIVE SECRET CLEARANCE REQUIRED

40360
Orlando, FL

Translate software requirements into design and implement software code in Ada 95 and C programming languages.
Perform unit test and software/hardware integration on new architecture
Experience in hardware/software integration and full software development life cycle process including requirements analysis, design, code, integration, test and verification.

• Ada 95, C development experience
• Experience in hardware/software integration
• Full software development lifecycle process including requirements analysis, design, code, integration, test and verification

Job Number: 40360
Job Location: Orlando, FL
Per Diem: Split
Overtime: Possible
Start Date: ASAP
Input Date: 12/07/2017

Firm Name: PANTHER GROUP
Attention: Bob
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer

Description:
Major purpose:
We are currently seeking a Senior Software Engineer with experience writing embedded software. This individual will have the opportunity to work on Infrared Product lines, responsible for a variety of software tasks throughout the full lifecycle. Responsibilities include designing, coding, documenting, and testing C and C++ applications/systems. General knowledge of hardware and communication protocols is a huge plus.
Major functions:

Technical/Functional skills:
Education/Experience/Licenses etc.: Required Competencies/Skills:
• Experience using C/C++ to develop embedded software
• Experience with Real-Time Operating Systems (FreeRTOS a plus)
• Excellent verbal and written communication skills
• Demonstrated ability to work as part of a team
• 6+ years of experience
• Minimum of BS in Computer Engineering, Electrical Engineering, Computer Science or similar

Preferred Competencies/Skills:
• Experience with Communication Protocols (Ethernet, RS422, CoaXpress, Camera Link, GigE Vision, etc.)
• Experience working with other programming languages such as C#, MATLAB, Python, etc.
• Experience in the Defense, Space, Aerospace, or similar industries
• Experience using Quartus and Altera/Client tools
• Experience using electronic test equipment such as oscilloscopes, DMMs, and basic lab equipment
• Experience with Linux and Windows Development Environments
• Basic knowledge of circuits, schematics, and hardware design

Job Number: 17-53009
Job Location: Mason, OH
Rate: 65.00 - 85.00
Per Diem: No
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 12/07/2017

Firm Name: NESCO RESOURCE
Attention: Sebastian Hernandez
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer

Description:
US DOD Secret Clearance Required

C/C++, Linux (Red Hat)

Razor (CM Control), Domain Knowledge of Air and Missile Defense, Seeker Programming and/or Integration, Hardware-in-the-Loop (HWIL) - Unit Under Test Experience

Job Number: 40162
Job Location: TX
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 12/07/2017

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer - Level 2

Description:
Embedded Software Engineer - Level 2

Location: Grand Prairie, TX
Pay Rate: DOE ($65/hr - $80.73/hr)
Duration: 1 year W2 contract
Shift: First, 9/80, no/exempt OT
Travel: Yes, travel to various customer locations
**MUST be a U.S. CITIZEN**
**MUST have an ACTIVE DoD SECRET CLEARANCE**

Description
-This Company's Tactical Missiles Advanced Programs area is seeking Software Engineering candidates to perform development associated with the following program product lines: Tactical Missile System (TACMS), Army Tactical Missile System (ATACMS), and Guided Multiple Launcher Rocket System (GMLRS).
-Software engineering effort will be to implement Operational Flight Software (OFS), Operational Test Software (OTS), and Launcher Simulation/Emulator Software updates.
-Skills required are real time programming, including experience with the vxWorks real time operating system, inertial and GPS navigation applications, and Ethernet communication protocol.
-Preferred skills and experience include use of the GNAT Ada compilation system, C/C++, Wind River Workbench development environment, Power PC experience, including use of an In-Circuit Emulator, and the Razor configuration management data base system.

Skill/Experience/Education (Mandatory):
-Real Time programming, including experience with the vxWorks real time operating system, inertial and GPS navigation applications, and Ethernet communication and datalink protocol.
-US DOD Secret Clearance Required
-BS in Computer Engineering, Computer Science, Software Engineering, or Related Field
-C/C++ (4-5+ years' experience required)
-ADA (4-5+ years' experience required)
-Real Time Software Development (4-5+ years' experience required)
-Wind River Workbench (4-5+ years' experience required)
-vxWorks, (4-5+ years' experience required)
-Inertial & GPS navigation units (4-5+ years' experience required)
-Power PC Development, (4-5+ years' experience required)

Desired:
-Software configuration management tool experience
-Razor(0-3+ years' experience desired)

Job Number: 8130
Job Location: Grand Prairie, TX
Rate: DOE
Per Diem: Split Possible
Overtime: No
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2017
Last Updated: 02/05/2018

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer - Level 2

Description:
Embedded Software Engineer - Level 2

Location: Grand Prairie, TX
Pay Rate: DOE ($65/hr - $80.73/hr)
Duration: 6 month W2 contract
Shift: First, 9/80, no/exempt OT
Travel: Yes, travel to various customer locations (Littleton, CO)
**MUST be a U.S. CITIZEN**
**MUST have an ACTIVE DoD SECRET CLEARANCE**

Description
This Company is seeking Software engineers to enhance their existing Ground vehicle Hardware in the Loop (HWIL) Laboratory and its tools for their Australian Mine autonomous vehicle program.
-These positions required the following skill sets: Past Hardware In the Loop (HWIL) development experience, Low Fidelity Gazebo models, vehicle models, mine environment models, sensor, models, Test cases, and other simulation development/enhancement as needed
-Primary development language will be C++ and it will be hosted on multiple Operating Systems such as Ubuntu, Redhat Linux, and VxWorks.
-Experience with ROS/Gazebo is also highly desired
-Travel will be required to Littleton Colorado

Skill/Experience/Education (Mandatory):
-US DOD Secret Clearance Required
-BS in Computer Engineering, Computer Science, Software Engineering, or Related Field,
-Hardware In The Loop (HWIL) experience (4-5+ years' experience required)
-C/C++ (4-5+ years' experience required)
-Gazebo (4-5+ years' experience required)
-ROS (4-5+ years' experience required)
-Prior Simulation development/enhancement (4-5+ years' experience required)
-Ubuntu (4-5+ years' experience required)
-Redhat Linux (4-5+ years' experience required)
-VxWorks (0-3+ years' experience required)

Desired:
-Software Configuration Management (CM) Tools;

Job Number: 8129
Job Location: Grand Prairie, TX
Rate: DOE
Per Diem: Split Possible
Overtime: No
Duration: 6 mos
Start Date: ASAP
Input Date: 11/14/2017
Last Updated: 02/05/2018

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer - Level 2

Description:
Embedded Software Engineer - Level 2

Company: Lockheed Martin
Location: Grand Prairie, TX
Pay Rate: DOE ($65/hr - $80.73/hr)
Duration: 1 year W2 contract
Shift: First, 9/80, no/exempt OT
Travel: Yes, travel to various customer locations
Openings: 4
**MUST be a U.S. CITIZEN**
**MUST have an ACTIVE DoD SECRET CLEARANCE**

Description
-This Company is seeking a Software Engineer with Real Time environment experience.
-The Poland military is planning to develop a multi-purpose weapon launcher and upgrade their existing weapons. Development will include displaying the Polish language, interfacing with the Polish command and control system, implementation of launcher motion-control, and Polish specific weapons.

Skill/Experience/Education (Mandatory):
-Real Time programming, including experience with the vxWorks real time operating system, inertial and GPS navigation applications, and Ethernet communication and datalink protocol.
-US DOD Secret Clearance Required
-BS in Computer Engineering, Computer Science, Software Engineering, or Related Field
-C/C++ (4-5+ years' experience required)
-ADA (4-5+ years' experience required)
-Real Time Software Development (4-5+ years' experience required)
-Wind River Workbench (4-5+ years' experience required)
-vxWorks, (4-5+ years' experience required)
-Inertial & GPS navigation units (4-5+ years' experience required)
-Power PC Development,

Desired:
-Software configuration management tool experience
-Razor(0-3+ years' experience desired)
-Power PC Development (4-5+ years' experience desired)
-Use of the GNAT Ada compilation system, Wind River Workbench development environment, Power PC experience, including use of an In-Circuit Emulator, and the Razor configuration management data base system.

Job Number: 8127
Job Location: Grand Prairie, TX
Rate: DOE
Per Diem: Split Possible
Overtime: No
Duration: 1 year
Start Date: ASAP
Input Date: 10/25/2017
Last Updated: 02/05/2018

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer - Level 2

Job Number: 8128
Job Location: Grand Prairie, TX
Rate: DOE
Per Diem: Split Possible
Overtime: No
Duration: 1 year
Start Date: ASAP
Input Date: 10/25/2017
Last Updated: 02/05/2018

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer - Level 3

Description:
Embedded Software Engineer - Level 3

Location: Archbald, PA
Pay Rate: DOE ($40/hr - $55/hr)
Duration: 1 year contract
Shift: First, 9/80, OT
Travel: Possible occasional travel to customer or vendor sites
**MUST be a U.S. CITIZEN**
**MUST be ELIGIBLE for a SECRET CLEARANCE – ACTIVE SECRET CLEARANCE PREFERRED**

Description
-Designs, develops, operates, and maintains software and firmware components and computing systems software to be applied to and integrated with engineering, scientific, and manufacturing requirements.
-Applies the appropriate standards, processes, procedures, and tools throughout the system development life cycle to support the generation of such engineering applications and products such as laboratory simulation systems, airplane flight control and display systems, avionics, mechanical and electrical systems, weapons armament, commercial and military aircraft systems, mobile and ground-based defense systems, space systems, and other systems and applications of this nature.
-Interfaces with customers, suppliers, application users, and other technical and support personnel.

Skill/Experience/Education (Mandatory):
- C/C++ programming: (6-8 years' experience required)
-Embedded software: (6-8 years' experience required)
-Hardware/software integration: (4-5 years' experience required)
-Software documentation experience
-Software verification experience

Job Number: 7788
Job Location: Archbald, PA
Rate: 40-55
Per Diem: Split Possible
Overtime: Yes
Duration: 1 year
Start Date: ASAP
Input Date: 12/01/2017
Last Updated: 02/05/2018

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software engineer (UAV Controls)

Description:
Role: Embedded Software engineer (UAV Controls)
Location: Sterling, VA 20164 - 7104
Duration: 12+ Months Contract
Could be contract to hire for the right candidate

Please Note: 'U.S. Citizens OR Permanent Residents and those authorized to work in the U.S. are encouraged to apply. We are unable to sponsor at this time.'
No vendors!! Direct consultants only please.

Role Description: Develop an integrated inertial navigation system and flight control system for an unmanned aerial vehicle. This includes software for a board support package, framework, vehicle state estimation, autopilots and mission planning.

Position responsibilities:
• Design, code, test, and provide ongoing support for embedded systems software to meet technological and customer requirements
• Define and analyze system software design requirements and write software requirements documents to meet defined and anticipated customer needs and system quality and performance standards
• Write software integration and test plans; conduct and lead software verification, testing and integration efforts to identify required modifications and ensure optimum system performance at delivery
• Collaborate with electrical engineers in planning, design and development of systems to ensure software and hardware performance and compatibility
• Develop interface definitions in conjunction with design team and enforce interface control documents to record and validate system performance standards and results
• Lead and participate in software Design Reviews to ensure team progress against milestones are met and to maintain highest quality level within project schedules
• Serve as technical lead on projects as assigned, working with customers to meet deliverables and address and resolve technology or system issues
• Must demonstrate the ability to maintain professional demeanor at all times and under all circumstances;
• Effectively manage multiple priorities and deadlines; exceptional interpersonal, written, and verbal communication skills;
• Strong customer service, quality, and team orientation; organizational skills and detail focus;
• Self motivation, self direction, and able to work independently; and a commitment to continuous improvement of knowledge, skills and abilities

Required skills/Experience for Embedded UAV Controls Software Engineer
• 4 year degree in an applicable STEM field REQUIRED
• MINIMUM of 3-4 years of experience in embedded software development
• Real Time Embedded Software, C/C++
• Windows Forms, GUI development, C#
• DO-178B Requirements/Development/Test
• OMAP/ARM/PowerPC
• Embedded Linux/GCC/GDB
• GreenHills Integrity and MULTI, uCOS, VectorCast C
• Control Systems/Inertial Navigation Systems/Engine Control
• Interfaces - Serial/CANBus/Ethernet/I2C
• ClearCase/ClearQuest

Job Number: 52875
Job Location: Sterling, VA
Rate: open
Per Diem: possible
Overtime: possible
Duration: 12+ months
Start Date: asap
Input Date: 12/07/2017

Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Arun
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD
City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

Engine/APU, ECS, Fuel Systems Engineer

Description:
Engine/APU, ECS, Fuel Systems Engineer

Location: Savannah, GA
Pay Rate: $58/hr - $63/hr
Duration: Long Term Contract
Shift: First

Unique Skills:
Required Experience in the following:
• System Certification Requirements: Cert Plan, Flight Test Plan, Flight Test Report, Qual Test Report, Lab test report, Testing requirements/Flight Clearance and or SOF Requirements, development testing
• Hardware Qualification: Plans, procedures, Reports, conformity, ATP & Outline Drawings
• Software Certification: Experience reviewing PSAC, CIA, SAS. Experience in software V&V Required Experience in the following:
• Engine Systems (FADEC)
• Environmental Control Systems
• APU systems
• Fuel systems (Distribution and Indication)

Desired Experience in the following:
• Working Knowledge ARP4754 and CFR 25
• Exposure to Part 33 certification
• Project Management Skills/Experience:
• Configuration change management

Job Number: 7519
Job Location: Savannah, GA
Rate: $58-$63
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 03/07/2018
Last Updated: 07/10/2018

Engineer Structural- 5- Secret Clearance

Description:
PDS Tech is seeking a candidate for the Engineer Structural 5 position located in Melbourne, FL.

Perform static, dynamic, and DaDT structural analyses of metallic airframe structure, mechanical systems, and equipment, by hand and by using the automated methods and procedures approved for the program.
Ensure that designs meet program requirements and are the lightest, lowest cost, and highest quality products consistent with schedule and budget objectives.
The analyst may also be expected to derive non-flight applied loads, create, extract and distribute internal loads, and perform weight and stiffness optimization. T
ools utilized may include FEMAP, NX,Teamcenter and other software applications.

Basic Qualifications:

Bachelor of Science degree (ME/AE/CE) with 14 years of experience in AEROSPACE Structural Analysis.

Preferred Qualifications:

Knowledge of FEMAP and NX CAE. Candidate must be able to collaborate in a team environment, prioritize and adjust tasks to accomplish the project result, prioritize multiple responsibilities and/or accomplishing them simultaneously, and comprehend and analyze complex problems and develop solutions. Candidate must be able to collaborate in a team environment, prioritize and adjust tasks to accomplish the project result, prioritize multiple responsibilities and/or accomplishing them simultaneously, and comprehend and analyze complex problems and develop solutions.

Job Number: 1710075260
Job Location: Melbourne, FL
Duration: 5 months
Input Date: 10/11/2017
Last Updated: 07/17/2018

Firm Name: PDS TECHNICAL SERVICES
Attention: Elisa Petersen
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000023L3MAAU&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Aides (Internship) - Santa Barbara, CA

Description:
STS AeroStaff Services now offers Engineering Aide jobs in Santa Barbara, California. This is a part time internship for a CURRENT student whose GPA is at least 3.0 or higher.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Overview:

Seeking a talented engineering intern with electrical, electronic engineering, or integrated circuit design training or experience to help advance the state-of-the art in infrared and visible sensors.

Job Duties:

• The selected candidate will contribute as part of a design team creating advanced infrared cameras and imaging systems
• Technology areas of interest include integrated circuit CMOS design, software development and programming in C, C++, and MATLAB, systems engineering, electrical engineering, analog and digital circuit design, RF design, integrated circuit design, and/or infrared optics and radiometry

Qualifications:

• Must be a CURRENT student with a GPA of 3.0 or higher

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.

Job Number: 40745
Job Location: Santa Barbara, CA
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 11/29/2017

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Design Engineer III & IV - Everett, WA

Description:
SEVERAL OPENINGS IN THE SEATTLE/EVERETT, WA AREA.

Evaluates program and project requirements, develops complex equipment and tooling concepts and designs solutions for the Production System. Compiles and analyzes technical data to determine the effects on product engineering design and rate estimates, identifies robotics, automation or technology recommendations and system integration for equipment and tooling. Ensures compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements. Validates contractual performance milestones, maintains configuration control, conducts reviews, prepares plans for productions readiness, preventative maintenance, and spares. Conducts training for Production and Maintenance personnel. Develops and implements work-arounds and maintains configuration of hardware, software and documentation. Performs studies and make recommendation for disposition of assets.

Degree and typical experience in engineering classification: Bachelor's or Master's or PhD. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

CATIA V5

ACS Group (formerly 'Comforce')

Job Number: TDEwa
Job Location: Everett, WA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 10+ Months
Start Date: ASAP
Input Date: 01/10/2018
Last Updated: 02/02/2018

Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Designer

Description:
Equipment & Tool Designer

Location: Everett, WA
Duration: 9 months

Description:
Leads the development of highly complex equipment and tooling concepts and specifications to satisfy aerospace product design and build requirements. Leads design reviews, design requirement collection, drawing creation and revision. Researches the application of robotics, automation and new technology to support the build plan. Creates off-load packages, specifications, purchase requests and usage instructions for equipment and tooling. Checks designs for compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements. Establishes and validates spares requirements. Leads the implementation of best practices into functional process documentation to drive standard work. Oversees the development and documentation of equipment and tooling inspection and usage instructions, preventative maintenance plans, and user training. Provides technical direction to support engineering changes and discrepancy resolution. Oversees the maintenance of hardware and software configuration. Assesses and makes recommendations for disposition of equipment and tooling.

Education
AA degree in related discipline and typically 6 or more years of related experience or an equivalent combination of education and experience.

Skill Code:
66W-Tech Designer

If interested then please share updated resume at ravi@iconma.com

Job Number: 17-19963
Job Location: Everett,, WA
Input Date: 11/27/2017
Last Updated: 12/26/2017

Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 1201 PACIFIC AVE STE 600
City, State: TACOMA, WA 98402
Phone: 253/213-2012
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Designer 3

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Equipment & Tool Designer 3
(U.S. Citizenship Required*)
Everett, WA
2017-4999

Responsibilities:
• Evaluates program and project requirements, develops complex equipment and tooling concepts and designs solutions for the Production System.
• Compiles and analyzes technical data to determine the effects on product engineering design and rate estimates, identifies robotics, automation or technology recommendations and system integration for equipment and tooling.
• Ensures compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements.
• Validates contractual performance milestones, maintains configuration control, conducts reviews, prepares plans for productions readiness, preventative maintenance, and spares.
• Conducts training for Production and Maintenance personnel.
• Develops and implements work-arounds and maintains configuration of hardware, software and documentation.
• Performs studies and make recommendation for disposition of assets.

Qualification:
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor's and 5 or more years' experience, Master's degree with 3 or more years' experience or PhD degree with experience.
• Degree must be from an accredited course of study in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!

PLEASE APPLY ONLINE HERE: https://careers-moseleytechnical.icims.com/jobs/4999/equipment-%26-tool-engineer-3/job?mode=view

Job Number: 2017-4999
Job Location: Everett, WA
Duration: 10 Months
Input Date: 12/05/2017

Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Aaron Burrows
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Designer 3

Description:
Equipment & Tool Designer 3

Location: Everett, WA
Duration: 9 months

Job Description:
Investigates and develops complex equipment and tooling concepts and specifications to satisfy aerospace product design and build requirements. Participates in design reviews, collects design requirements, creates and revises drawings and models, researches the application of robotics, automation and new technology to support the build plan. Creates off-load packages, specifications, purchase requests and usage instructions for equipment and tooling. Checks designs for compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements. Develops and documents equipment and tooling inspection and usage instructions, preventative maintenance plans, and user training. Provides technical support for engineering changes and discrepancies by investigating problems and analyzing data to identify solutions. Maintains hardware and software configuration. Assesses and makes recommendations for disposition of equipment and tooling.

Education:
AA degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience.

Skill Code: 66W-Tech Designer

If interested then please share updated resume at ravi@iconma.com

Job Number: 17-19956
Job Location: Everett,, WA
Input Date: 11/27/2017
Last Updated: 01/02/2018

Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 1201 PACIFIC AVE STE 600
City, State: TACOMA, WA 98402
Phone: 253/213-2012
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Designer 3

Description:
Job Description
• Investigates and develops complex equipment and tooling concepts and specifications to satisfy aerospace product design and build requirements.
• Participates in design reviews, collects design requirements, creates and revises drawings and models, researches the application of robotics, automation and new technology to support the build plan.
• Creates off-load packages, specifications, purchase requests and usage instructions for equipment and tooling.
• Checks designs for compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements.
• Develops and documents equipment and tooling inspection and usage instructions, preventative maintenance plans, and user training.
• Provides technical support for engineering changes and discrepancies by investigating problems and analyzing data to identify solutions.
• Maintains hardware and software configuration.
• Assesses and makes recommendations for disposition of equipment and tooling.

Education/Experience
AA degree in related discipline and typically 3 or more years of related experience

Job Number: Ph# 636-438-0314;39855
Job Location: Everett, WA
Rate: Hourly
Per Diem: Split
Overtime: Possible
Duration: 9 mos
Start Date: 1/8/2018
Input Date: 11/21/2017
Last Updated: 12/06/2017

Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Michelle Fox
Address: WESTRIDGE OFFICE PARK
2646 HIGHWAY 109 STE 207
City, State: WILDWOOD, MO 63040
Phone: 636/438-0312
800 Phone: 866/277-3343
Fax Phone: 636/220-8284
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Designer 4

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Equipment & Tool Designer 4
(U.S. Citizenship Required*)
Everett, WA
2017-5001

Responsibilities:
• Leads the development of highly complex equipment and tooling concepts and specifications to satisfy aerospace product design and build requirements.
• Leads design reviews, design requirement collection, drawing creation and revision.
• Researches the application of robotics, automation and new technology to support the build plan.
• Creates off-load packages, specifications, purchase requests and usage instructions for equipment and tooling.
• Checks designs for compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements.
• Establishes and validates spares requirements.
• Leads the implementation of best practices into functional process documentation to drive standard work.
• Oversees the development and documentation of equipment and tooling inspection and usage instructions, preventative maintenance plans, and user training.
• Provides technical direction to support engineering changes and discrepancy resolution.
• Oversees the maintenance of hardware and software configuration.
• Assesses and makes recommendations for disposition of equipment and tooling.

Qualification:
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
AA degree in related discipline and typically 6 or more years of related experience or an equivalent combination of education and experience.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!

TO APPLY, PLEASE VISIT OUR WEBSITE: https://careers-moseleytechnical.icims.com/jobs/5001/equipment-%26-tool-designer-4/job?mode=view

Job Number: 2017-5001
Job Location: Everett, WA
Duration: 9 Months
Input Date: 12/05/2017

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Designer 3

Description:
Leads the development of highly complex equipment and tooling concepts and specifications to satisfy aerospace product design and build requirements. Leads design reviews, design requirement collection, drawing creation and revision. Researches the application of robotics, automation and new technology to support the build plan. Creates off-load packages, specifications, purchase requests and usage instructions for equipment and tooling. Checks designs for compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements. Establishes and validates spares requirements. Leads the implementation of best practices into functional process documentation to drive standard work. Oversees the development and documentation of equipment and tooling inspection and usage instructions, preventative maintenance plans, and user training. Provides technical direction to support engineering changes and discrepancy resolution. Oversees the maintenance of hardware and software configuration. Assesses and makes recommendations for disposition of equipment and tooling.

AA degree in related discipline and typically 6 or more years of related experience or an equivalent combination of education and experience.

Job Number: 17-27027
Job Location: Everett, WA
Per Diem: Split
Overtime: possible
Duration: 9 months
Start Date: 1/8/18
Input Date: 12/18/2017

Firm Name: ICONMA LLC
Attention: Constance Whitcomb
Address: 4620 E 53RD ST
City, State: DAVENPORT, IA 52807
Phone: 312/502-4795
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Designer 4

Description:
Job Description
• Leads the development of highly complex equipment and tooling concepts and specifications to satisfy aerospace product design and build requirements.
• Leads design reviews, design requirement collection, drawing creation and revision.
• Researches the application of robotics, automation and new technology to support the build plan.
• Creates off-load packages, specifications, purchase requests and usage instructions for equipment and tooling.
• Checks designs for compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements.
• Establishes and validates spares requirements.
• Leads the implementation of best practices into functional process documentation to drive standard work.
• Oversees the development and documentation of equipment and tooling inspection and usage instructions, preventative maintenance plans, and user training.
• Provides technical direction to support engineering changes and discrepancy resolution.
• Oversees the maintenance of hardware and software configuration.
• Assesses and makes recommendations for disposition of equipment and tooling.

Education/Experience
AA degree in related discipline and typically 6 or more years of related experience

Job Number: Ph# 636-438-0314;
Job Location: Everett, WA
Rate: Hourly
Per Diem: Split
Overtime: Possible
Duration: 9 mos
Start Date: 1/8/2018
Input Date: 11/21/2017
Last Updated: 12/06/2017

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Engineer 3

Description:
Equipment & Tool Engineer 3

Evaluates program and project requirements, develops complex equipment and tooling concepts and designs solutions for the Production System. Compiles and analyzes technical data to determine the effects on product engineering design and rate estimates, identifies robotics, automation or technology recommendations and system integration for equipment and tooling. Ensures compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements. Validates contractual performance milestones, maintains configuration control, conducts reviews, prepares plans for productions readiness, preventative maintenance, and spares. Conducts training for Production and Maintenance personnel. Develops and implements work-arounds and maintains configuration of hardware, software and documentation. Performs studies and make recommendation for disposition of assets.

Degree and typical experience in engineering classification: Bachelor's and 5 or more years' experience, Master's degree with 3 or more years' experience or PhD degree with experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

Job Number: 17-27025
Job Location: Everett, WA
Per Diem: Split
Overtime: possible
Duration: 9 months
Start Date: 1/8/18
Input Date: 11/29/2017

Firm Name: ICONMA LLC
Attention: Constance Whitcomb
Address: 4620 E 53RD ST
City, State: DAVENPORT, IA 52807
Phone: 312/502-4795
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Engineer 3

Description:
Equipment & Tool Engineer 3

Location: Everett, WA
Duration: 9 months

Job Description
Evaluates program and project requirements, develops complex equipment and tooling concepts and designs solutions for the Production System. Compiles and analyzes technical data to determine the effects on product engineering design and rate estimates, identifies robotics, automation or technology recommendations and system integration for equipment and tooling. Ensures compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements. Validates contractual performance milestones, maintains configuration control, conducts reviews, prepares plans for productions readiness, preventative maintenance, and spares. Conducts training for Production and Maintenance personnel. Develops and implements work-arounds and maintains configuration of hardware, software and documentation. Performs studies and make recommendation for disposition of assets.

Education
Degree and typical experience in engineering classification: Bachelor's and 5 or more years' experience, Master's degree with 3 or more years' experience or PhD degree with experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

Skill Code: 66U-Designer Engineer

If interested then please share updated resume at ravi@iconma.com

Job Number: 17-19952
Job Location: Everett,, WA
Input Date: 11/27/2017
Last Updated: 01/02/2018

Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 1201 PACIFIC AVE STE 600
City, State: TACOMA, WA 98402
Phone: 253/213-2012
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Engineer 4

Description:
Equipment & Tool Engineer 4

Develops program and project requirements, develops highly complex equipment and tooling concepts and designs solutions, including alternatives for the Production System. Validates analysis of technical data, influences product engineering design and makes robotics, automation or technical recommendations to support production system integration for a aerospace products. Leads the creation and modification of equipment and tooling definition at the program level. Executes project plans, provides input to Make/Buy decisions and partners with Procurement to meet program schedule, cost and quality targets. Ensures compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements. Leads gated reviews and develops plans for production readiness, preventative maintenance and spares. Validates contractual performance milestones. Develops and implements work-arounds and maintains configuration of hardware, software and documentation. Conducts studies and make recommendation for disposition of assets.

Degree and typical experience in engineering classification: Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

Job Number: 17-27026
Job Location: Everett, WA
Per Diem: Split
Overtime: possible
Duration: 9 months
Start Date: 1/8/18
Input Date: 12/11/2017
Last Updated: 12/18/2017

Firm Name: ICONMA LLC
Attention: Constance Whitcomb
Address: 4620 E 53RD ST
City, State: DAVENPORT, IA 52807
Phone: 312/502-4795
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Engineer 4

Description:
Equipment & Tool Engineer 4

Location: Everett, WA
Duration: 9 months

Job Description:
Develops program and project requirements, develops highly complex equipment and tooling concepts and designs solutions, including alternatives for the Production System. Validates analysis of technical data, influences product engineering design and makes robotics, automation or technical recommendations to support production system integration for a aerospace products. Leads the creation and modification of equipment and tooling definition at the program level. Executes project plans, provides input to Make/Buy decisions and partners with Procurement to meet program schedule, cost and quality targets. Ensures compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements. Leads gated reviews and develops plans for production readiness, preventative maintenance and spares. Validates contractual performance milestones. Develops and implements work-arounds and maintains configuration of hardware, software and documentation. Conducts studies and make recommendation for disposition of assets.

Education:
Degree and typical experience in engineering classification: Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

Skill Code:
66U-Designer Engineer

If interested then please share updated resume at ravi@iconma.com

Job Number: 17-19959
Job Location: Everett,, WA
Input Date: 11/27/2017
Last Updated: 01/02/2018

Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 1201 PACIFIC AVE STE 600
City, State: TACOMA, WA 98402
Phone: 253/213-2012
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment and Tool Engineer

Description:
**U.S. Person required.

**Catia V5 design experience is required.

Evaluates or develops program and project requirements, develops complex equipment and tooling concepts and designs solutions for the Production System. Compiles or validates and analyzes technical data to determine the effects on product engineering design and rate estimates, identifies robotics, automation or technology recommendations and system integration for equipment and tooling. Ensures compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements. Validates contractual performance milestones, maintains configuration control, conducts reviews, prepares plans for productions readiness, preventative maintenance, and spares. Conducts training for Production and Maintenance personnel. Develops and implements work-arounds and maintains configuration of hardware, software and documentation. Performs studies and make recommendation for disposition of assets.

Degree and typical experience in engineering classification: Bachelor's and 5 to 9 or more years' experience, Master's degree with 3 to 7 or more years' experience or PhD degree with 1 to 4 or more years’ experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

**We also have non-degreed designer positions available as well.

Job Number: 28026/28025
Job Location: WA
Rate: open
Per Diem: split
Overtime: possible
Duration: 10 months
Start Date: asap
Input Date: 11/21/2017
Last Updated: 12/06/2017

Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Erica Price
Address: WESTRIDGE OFFICE PARK
2646 HIGHWAY 109 STE 207
City, State: WILDWOOD, MO 63040
Phone: 636/438-0312
800 Phone: 866/277-3343
Fax Phone: 636/220-8284
Website: www.apollopros.com

FMS engineers (ADA development & Test)

Description:
The initial training period for 6 months in Cedar Rapids, then work effort will be brought back to Enea Phoenix Engineering Office if this is more convenient for you. May also choose to stay onsite in Iowa.

FMS engineers (Systems and/or Software Engineers)
Job Requirements:

Significant Avionics FMS or Flight Controls software experience is required

Software experience that can also write Low and Higher Level Requirements and associated tests. Debugging software on target hardware to obtain root cause is also a plus
Undergraduate or Graduate degree in Computer Science, Computer Engineering, Electrical Engineering, or related scientific discipline

Working knowledge of high-order programming languages (C, Ada, C++, Matlab/Simulink, etc.)

Demonstrated teamwork and leadership abilities

Strong communication and presentation skills

Strong object-oriented language (C++, C#, Python, etc.) and software development methodologies (Waterfall, Agile, etc.)

Strong background with GUI a plus!

Embedded software experience is required

Knowledge of DO-178 Development Standards

Enea does not have the ability to sponsor applicants for work visas for this position.

Job Number: 398
Job Location: Cedar Rapids/Phoenix, IA/AZ
Rate: DOE
Per Diem: YES
Overtime: YES
Duration: 1 YEAR
Start Date: July 30
Input Date: 07/10/2018
Last Updated: 07/13/2018

Firm Name: ENEA SOFTWARE AND SERVICES
Attention: Walter Walonoski
Address: 2555 E CAMELBACK RD STE 280
City, State: PHOENIX, AZ 85016
Phone: 480/753-9200
Fax Phone: 480/753-6400
Email: recruiters@enea.com
Website: www.enea.com/services/expertise

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Financial Analyst ( Dulles, VA ) 7317175

Description:
Financial Analyst ( Dulles, VA ) 7317175
6 Month Contract

Pay rate: $50/hr w2 maybe more for the right candidate

Required Qualifications: Candidate must possess an active TS/SCI clearance.

EDUCATION: Bachelor's Degree from an accredited university in Program Management or Business Administration with emphasis in Finance, Accounting or a related discipline.

REQUIRED SKILLS: Six (6) years or more of related experience with employing EIA-748 compliant EVMS techniques for program management, including planning and budgeting, estimating and forecasting, cost/schedule integration, integration of subcontractor data, review and analysis of program data. Must be analytical and possess excellent communication, presentation, and interpersonal skills with history of interfacing effectively with program technical and business personnel, management and customers. Candidate must have the initiative, flexibility, and resourcefulness to complete assignments of moderate complexity on time within a fast paced environment while working independently and as a member of a team. Must possess the interest and ability to learn new processes and tools.

PREFERRED EXPERIENCE: Operational experience with government programs with contractually required EVMS compliance, including participation in Integrated Baseline Reviews and joint or internal surveillance is preferred. Familiarity with the PARCA EVMS Interpretation Guide, the DCMA data-driven surveillance initiative and the Integrated Program Management Report Data Item. Experience with project scheduling including creation, review and analysis of detailed, resource-loaded project schedules is preferred. Demonstrated ability to mentor and teach EVMS processes and concepts to new CAMs is preferred. An Earned Value Management Certification (EVP or equivalent) is preferred.

COMPUTER SKILLS: Requires mastery of basic MS Office Software (Word, Excel, and PowerPoint). Working knowledge of Costpoint and Cognos, and Project Management software (MS Project, Cobra, Acumen) is preferred.

Job Number: 7317175
Job Location: Dulles, VA
Rate: 50
Per Diem: Split
Overtime: Yes
Duration: 6 month
Start Date: ASAP
Input Date: 01/01/2018

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Engineer

Description:
Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM’s. Located in Seattle, they are a small but rapidly growing company in Seattle, WA. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants.

We are seeking full-time and contract Flight Test Engineers to join us in Moses Lake, WA. The ideal candidate will possess experimental flight test operational experience in either STC or Type Cert Programs. The individual in this position will be involved in a range of airplane flight test operations.

Essential Functions:
Coordinate test and certification requirements.
Author flight test and ground test plans including test hazard analysis.
Author instrumentation specifications, wire diagrams, FTEO packages, and calibration documentation.
Support instrumentation installation as required.
Support ground operations, including weight and balance activities, fuel management, pre-flight and post-flight tasks and briefings.
Support flight and ground test conduct and data collection.
Analyze test data and evaluate compliance with regulations.
Prepare certification test reports.
Domestic and occasional international travel is required.
Desired Qualifications:

5+ years relevant work experience related to experimental flight test operations. Experience in all of the above activities is not critical.
Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.
Ability to think critically, identify and synthesize important information necessary to inform client deliverables.
Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
Demonstrates personal accountability, initiative and versatility on a consistent basis with minimal guidance.
Proficient in working with Microsoft Office applications including Word, Excel, and PowerPoint. Ability to quickly learn to operate new software.
Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.

Job Location: Moses Lake, WA
Per Diem: possible
Overtime: Yes
Duration: LT
Start Date: asap
Input Date: 11/30/2017
Last Updated: 12/07/2017

Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Full-Stack Developer (U.S. citizenship required)

Description:
Full-Stack Developer (U.S. citizenship required)

Location: Centennial, CO
Pay Rate: Depends on Experience (DOE)
Duration: 6 month W2 contract
Shift: not specified
**MUST be a U.S. CITIZEN**

Summary:
As a full-stack developer, the ideal candidate will be responsible for building a new single page application for our CRE Dashboard project. We are seeking a talented developer who is self-motivated to work with our Certified Responsible Engineers (CRE’s) in developing new features to support their business needs.

Responsibilities Include:
• Work with Product Owner & key stakeholders to identify solutions that meet their needs
• Collaborate with business users and technology partners at all levels
• Provide direction for testing of new functionality
• Concept, storyboard, wireframe and prototype user experiences on web app
• True full stack development, exposure to front end and back end architecture
• Provide valuable insight into front end development best practices, trends and techniques

Job Requirements
REQUIREMENTS:
• Bachelor's degree in Information Science/Information Technology, Computer Science, Engineering or related experience.
• 5+ year’s software development experience.
• Experience in Java
• Experience in a modern web application framework (preferably Spring)
• Experience in writing SQL queries against relational database (preferably Oracle)
• Experience in a version control system (preferably GIT)
• Experience in a Linux or Unix based environment
• Exposure to production systems design including Performance, Efficiency and Security
• Exposure to query optimization and troubleshooting
• Exposure to effective data modeling within SQL
• Understanding of modern Microservice-based architectures and methodologies
• Exposure to REST and effective web service design
• Strong communication, decision-making, and problem-solving skills
• Deep knowledge of AngularJS practices and commonly used modules based on extensive work experience.
• Concept, storyboard, wireframe and prototype user experiences on web apps.
• Proficiency with testing tools (Karma, Jasmine).
• Ability to maintain a high level of attention to detail with flexibility to work independently and collaboratively
• Experienced in Agile methods using Scrum.
• JIRA experience or knowledge of preferred

Job Number: 8353
Job Location: Centennial, CO
Rate: DOE
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 12/05/2017
Last Updated: 02/14/2018

Guidance, Nav & Ctrl Eng (3)-FL-C

Description:
Chipton-Ross is seeking 3 (three) Guidance, Nav & Ctrl Eng in Orlando, FL.

Description
Guidance, Navigation, and Control (GNC) engineer position. Responsibilities include, but are not limited to developing and analyzing GNC algorithms, Inertial Tracking / Target State Estimation algorithms, and Navigation algorithms using various simulations. Experience designing closed-loop control systems and missile autopilot algorithms is a big plus. Develop and test 6-DOF simulation models and simulation builds, and perform flight software verification / hardware-in-the-loop (HWIL) integration tests. Perform development and performance assessment in the context of Integrated Flight Simulation (IFS). The candidate should have a strong controls background and an understanding of Optimal State Estimation techniques using Kalman filters. Must have C/C++, and, MATLAB programming experience.

Skill/Experience/Education
Mandatory:
Bachelor's Degree, or higher, from an accredited University and at least three (3) years experience working GNC related assignments.

Desired:
RF/EO Modeling, Mission Planning, Common Simulation Framework (CSF), and / or Simulink and FORTRAN experience is a plus

MISCELLANEOUS: Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

Job Number: 166750
Job Location: Orlando, FL
Rate: $DOE
Duration: 12 months
Input Date: 12/05/2017
Last Updated: 07/17/2018

Firm Name: CHIPTON ROSS
Attention: Robert Davis
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: rdavis@chiptonross.com
Website: www.chiptonross.com

Guidance, Nav & Ctrl Eng - Level 4 (3) - FL - C

Description:
Chipton-Ross is seeking a Guidance, Nav & Ctrl Eng - Level 4 (3) for an opening in Orlando, FL.

RESPONSIBILITIES:
Guidance, Navigation, and Control (GNC) engineer position. Responsibilities include, but are not limited to developing and analyzing GNC algorithms, Inertial Tracking / Target State Estimation algorithms, and Navigation algorithms using various simulations. Experience designing closed-loop control systems and missile autopilot algorithms is a big plus. Develop and test 6-DOF simulation models and simulation builds, and perform flight software verification / hardware-in-the-loop (HWIL) integration tests. Perform development and performance assessment in the context of Integrated Flight Simulation (IFS). The candidate should have a strong controls background and an understanding of Optimal State Estimation techniques using Kalman filters. Must have C/C++, and, MATLAB programming experience.
EDUCATION:
Bachelor's Degree, or higher, from an accredited University and at least three (3) years experience working GNC related assignments.

PREFERRED EXPERIENCE:
RF/EO Modeling, Mission Planning, Common Simulation Framework (CSF), and / or Simulink and FORTRAN experience is a plus

WORK HOURS:
9/80, 1st Shift, Full-Time

MISCELLANEOUS: Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

Job Number: 166660
Job Location: Orlando, FL
Rate: Up to $65.62 DOE
Duration: 11 Months
Input Date: 11/29/2017
Last Updated: 07/17/2018

Firm Name: CHIPTON ROSS
Attention: Kevin Suk
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: ksuk@chiptonross.com
Website: www.chiptonross.com

Guidance, Navigation, and Control Engineer

Description:
Guidance, Navigation and Control Engineer

PDS Tech is hiring experienced GNC Engineers for current and recurring positions in the Tuscon area.

Roles and Responsibilities (including some or all of the following):

System design, analysis, modeling, and simulation
Flight system performance analysis including nonlinear modeling, digital control, and system effectiveness analysis
Navigation system error analysis
Simulation - to include evaluation under nominal, off-nominal, and Monte Carlo flight modes
Develop, modify, and maintain hazards assessment tools to evaluate instantaneous impact points (IIP) and probability of impact
Develop, modify, and maintain GPS and telemetry processing tools for the reduction and analysis of flight test to determine Best Estimate of Trajectory (BET)
Prepare presentations, reports, research, and other contract deliverables related to analyses performed
Defining, analyzing, and reviewing results from model simulations
Using results of modeling and simulations to predict performance
Updating of models based on designs, test results, and other data
Statistical analysis to quantify effect of individual errors on system accuracy

Required Qualifications:
To be considered for this position, you must minimally meet the knowledge, skills, and abilities listed below:

BS in engineering or physics with 3+ years or MS in engineering or physics with 5+ years engineering experience with complex systems engineering
3+ years' experience with system simulation and software engineering processes (e.g., requirements development for new subsystem, requirements analysis and management, design development and review, configuration management, interface control)
3+ years system simulation and/or data analysis of airborne flight systems or equivalent
Experience with statistical analysis of test and simulation results using tools such as MATLAB
Experience in at least one of the following: control systems engineering, dynamic six degree of freedom modeling and simulation, launch vehicle analysis, navigation systems. Preference given to multiple skills
Must have demonstrated presentation skills and experience interfacing with customer
Position requires a proactive, self-starting, independent, flexible engineer with excellent interpersonal skills
Must have a current Secret security clearance or able to obtain clearance

Desired Qualifications:
Candidates with these desired skills will be given preferential consideration:

BS, MS or PhD in engineering or physics
Understanding of engineering disciplines including aerodynamics and structural dynamics
Experience in one or more of the following: Kalman Filtering, software development, Linux scripting, makefiles, Python, revision control systems

Job Number: 1710065198
Job Location: Tucson, AZ
Duration: 12 months
Input Date: 03/14/2017
Last Updated: 07/17/2018

Firm Name: PDS TECHNICAL SERVICES
Attention: Terry Brooke
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000021WIPAA2&URLSource=cjhunter

Guidance, Navigation, and Control Engineer

Description:
Guidance, Navigation and Control Engineer

PDS Tech is hiring experienced GNC Engineers for current and recurring positions in the Los Angeles area.

Roles and Responsibilities (including some or all of the following):

System design, analysis, modeling, and simulation
Flight system performance analysis including nonlinear modeling, digital control, and system effectiveness analysis
Navigation system error analysis
Simulation - to include evaluation under nominal, off-nominal, and Monte Carlo flight modes
Develop, modify, and maintain hazards assessment tools to evaluate instantaneous impact points (IIP) and probability of impact
Develop, modify, and maintain GPS and telemetry processing tools for the reduction and analysis of flight test to determine Best Estimate of Trajectory (BET)
Prepare presentations, reports, research, and other contract deliverables related to analyses performed
Defining, analyzing, and reviewing results from model simulations
Using results of modeling and simulations to predict performance
Updating of models based on designs, test results, and other data
Statistical analysis to quantify effect of individual errors on system accuracy

Required Qualifications:
To be considered for this position, you must minimally meet the knowledge, skills, and abilities listed below:

BS in engineering or physics with 3+ years or MS in engineering or physics with 5+ years engineering experience with complex systems engineering
3+ years' experience with system simulation and software engineering processes (e.g., requirements development for new subsystem, requirements analysis and management, design development and review, configuration management, interface control)
3+ years system simulation and/or data analysis of airborne flight systems or equivalent
Experience with statistical analysis of test and simulation results using tools such as MATLAB
Experience in at least one of the following: control systems engineering, dynamic six degree of freedom modeling and simulation, launch vehicle analysis, navigation systems. Preference given to multiple skills
Must have demonstrated presentation skills and experience interfacing with customer
Position requires a proactive, self-starting, independent, flexible engineer with excellent interpersonal skills
Must have a current Secret security clearance or able to obtain clearance

Desired Qualifications:
Candidates with these desired skills will be given preferential consideration:

BS, MS or PhD in engineering or physics
Understanding of engineering disciplines including aerodynamics and structural dynamics
Experience in one or more of the following: Kalman Filtering, software development, Linux scripting, makefiles, Python, revision control systems

Job Number: 1710065200
Job Location: Los Angeles, CA
Duration: 12 months
Input Date: 03/14/2017
Last Updated: 07/17/2018

Firm Name: PDS TECHNICAL SERVICES
Attention: Karla Pelonis
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000021WIeAAM&URLSource=cjhunter

Guidance, Navigation, and Control Engineer

Description:
Guidance, Navigation and Control Engineer

PDS Tech is hiring experienced GNC Engineers for current and recurring positions in the Minneapolis area.

Roles and Responsibilities (including some or all of the following):

System design, analysis, modeling, and simulation
Flight system performance analysis including nonlinear modeling, digital control, and system effectiveness analysis
Navigation system error analysis
Simulation - to include evaluation under nominal, off-nominal, and Monte Carlo flight modes
Develop, modify, and maintain hazards assessment tools to evaluate instantaneous impact points (IIP) and probability of impact
Develop, modify, and maintain GPS and telemetry processing tools for the reduction and analysis of flight test to determine Best Estimate of Trajectory (BET)
Prepare presentations, reports, research, and other contract deliverables related to analyses performed
Defining, analyzing, and reviewing results from model simulations
Using results of modeling and simulations to predict performance
Updating of models based on designs, test results, and other data
Statistical analysis to quantify effect of individual errors on system accuracy

Required Qualifications:
To be considered for this position, you must minimally meet the knowledge, skills, and abilities listed below:

BS in engineering or physics with 3+ years or MS in engineering or physics with 5+ years engineering experience with complex systems engineering
3+ years' experience with system simulation and software engineering processes (e.g., requirements development for new subsystem, requirements analysis and management, design development and review, configuration management, interface control)
3+ years system simulation and/or data analysis of airborne flight systems or equivalent
Experience with statistical analysis of test and simulation results using tools such as MATLAB
Experience in at least one of the following: control systems engineering, dynamic six degree of freedom modeling and simulation, launch vehicle analysis, navigation systems. Preference given to multiple skills
Must have demonstrated presentation skills and experience interfacing with customer
Position requires a proactive, self-starting, independent, flexible engineer with excellent interpersonal skills
Must have a current Secret security clearance or able to obtain clearance

Desired Qualifications:
Candidates with these desired skills will be given preferential consideration:

BS, MS or PhD in engineering or physics
Understanding of engineering disciplines including aerodynamics and structural dynamics
Experience in one or more of the following: Kalman Filtering, software development, Linux scripting, makefiles, Python, revision control systems

Job Number: 1710065197
Job Location: Minneapolis, MN
Duration: 12 months
Input Date: 03/14/2017
Last Updated: 07/17/2018

Firm Name: PDS TECHNICAL SERVICES
Attention: Roger Greco
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000021WIKAA2&URLSource=cjhunter

Guidance, Navigation, and Control Engineer

System design, analysis, modeling, and simulation
Flight system performance analysis including nonlinear modeling, digital control, and system effectiveness analysis
Navigation system error analysis
Simulation - to include evaluation under nominal, off-nominal, and Monte Carlo flight modes
Develop, modify, and maintain hazards assessment tools to evaluate instantaneous impact points (IIP) and probability of impact
Develop, modify, and maintain GPS and telemetry processing tools for the reduction and analysis of flight test to determine Best Estimate of Trajectory (BET)
Prepare presentations, reports, research, and other contract deliverables related to analyses performed
Defining, analyzing, and reviewing results from model simulations
Using results of modeling and simulations to predict performance
Updating of models based on designs, test results, and other data
Statistical analysis to quantify effect of individual errors on system accuracy

Required Qualifications:
To be considered for this position, you must minimally meet the knowledge, skills, and abilities listed below:

BS in engineering or physics with 3+ years or MS in engineering or physics with 5+ years engineering experience with complex systems engineering
3+ years' experience with system simulation and software engineering processes (e.g., requirements development for new subsystem, requirements analysis and management, design development and review, configuration management, interface control)
3+ years system simulation and/or data analysis of airborne flight systems or equivalent
Experience with statistical analysis of test and simulation results using tools such as MATLAB
Experience in at least one of the following: control systems engineering, dynamic six degree of freedom modeling and simulation, launch vehicle analysis, navigation systems. Preference given to multiple skills
Must have demonstrated presentation skills and experience interfacing with customer
Position requires a proactive, self-starting, independent, flexible engineer with excellent interpersonal skills
Must have a current Secret security clearance or able to obtain clearance

Desired Qualifications:
Candidates with these desired skills will be given preferential consideration:

BS, MS or PhD in engineering or physics
Understanding of engineering disciplines including aerodynamics and structural dynamics
Experience in one or more of the following: Kalman Filtering, software development, Linux scripting, makefiles, Python, revision control systems

Job Number: 1710065202
Job Location: Huntsville, AL
Duration: 12 months
Input Date: 03/14/2017
Last Updated: 07/17/2018

Firm Name: PDS TECHNICAL SERVICES
Attention: Rebecca Burrows
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000021WIoAAM&URLSource=cjhunter

Guidance, Navigation, and Control Engineer

Description:
Guidance, Navigation and Control Engineer

PDS Tech is hiring experienced GNC Engineers for current and recurring positions in the Tamarac area.

Roles and Responsibilities (including some or all of the following):

System design, analysis, modeling, and simulation
Flight system performance analysis including nonlinear modeling, digital control, and system effectiveness analysis
Navigation system error analysis
Simulation - to include evaluation under nominal, off-nominal, and Monte Carlo flight modes
Develop, modify, and maintain hazards assessment tools to evaluate instantaneous impact points (IIP) and probability of impact
Develop, modify, and maintain GPS and telemetry processing tools for the reduction and analysis of flight test to determine Best Estimate of Trajectory (BET)
Prepare presentations, reports, research, and other contract deliverables related to analyses performed
Defining, analyzing, and reviewing results from model simulations
Using results of modeling and simulations to predict performance
Updating of models based on designs, test results, and other data
Statistical analysis to quantify effect of individual errors on system accuracy

Required Qualifications:
To be considered for this position, you must minimally meet the knowledge, skills, and abilities listed below:

BS in engineering or physics with 3+ years or MS in engineering or physics with 5+ years engineering experience with complex systems engineering
3+ years' experience with system simulation and software engineering processes (e.g., requirements development for new subsystem, requirements analysis and management, design development and review, configuration management, interface control)
3+ years system simulation and/or data analysis of airborne flight systems or equivalent
Experience with statistical analysis of test and simulation results using tools such as MATLAB
Experience in at least one of the following: control systems engineering, dynamic six degree of freedom modeling and simulation, launch vehicle analysis, navigation systems. Preference given to multiple skills
Must have demonstrated presentation skills and experience interfacing with customer
Position requires a proactive, self-starting, independent, flexible engineer with excellent interpersonal skills
Must have a current Secret security clearance or able to obtain clearance

Desired Qualifications:
Candidates with these desired skills will be given preferential consideration:

BS, MS or PhD in engineering or physics
Understanding of engineering disciplines including aerodynamics and structural dynamics
Experience in one or more of the following: Kalman Filtering, software development, Linux scripting, makefiles, Python, revision control systems

Job Number: 1710065199
Job Location: Pompano Beach, FL
Duration: 12 months
Input Date: 03/14/2017
Last Updated: 07/17/2018

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Guidance, Navigation, & Controls Engineers - Orlando, FL

Description:
STS AeroStaff Services now offers Guidance, Navigation, & Controls Engineer jobs in Orlando, Florida.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Duties:

• Developing and analyzing GNC algorithms, Inertial Tracking / Target State Estimation algorithms, and Navigation algorithms using various simulations
• Develop and test 6-DOF simulation models and simulation builds, and perform flight software verification / hardware-in-the-loop (HWIL) integration tests
• Perform development and performance assessment in the context of Integrated Flight Simulation (IFS)

Qualifications:

• Bachelor's Degree, or higher, from an accredited University and at least three (3) years’ experience working GNC related assignments
• Experience designing closed-loop control systems and missile autopilot algorithms is a big plus
• RF/EO Modeling, Mission Planning, Common Simulation Framework (CSF), and / or Simulink and FORTRAN experience is a plus
• The candidate should have a strong controls background and an understanding of Optimal State Estimation techniques using Kalman filters
• Must have C/C++, and, MATLAB programming experience

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.

Job Number: 40795
Job Location: Orlando, FL
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 12/04/2017

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Hardware Engineer

Description:
- Lead engineering teams in development of software that is safety certifiable under MIL-STD-882E and/or ISO-26262
- Experience with real-time processing of sensor data
- Experience with Analog and Digital Circuit Design, including PCB design
- Experience with schematic entry and circuit board design tools (i.e. Mentor Graphics)
- Experience with Single Board Computers and Microcontrollers
- FPGA Design and Simulation, VHDL
- Experience with Analog and Digital Video Circuits
- Familiarity with Military Standards and Test Requirements
- Proficient in MIL-STD-882E and ISO-26262 and/or other safety-related specifications

Job Number: 41171
Job Location: MI
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 11/29/2017

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Hardware Reliability Test Engineer

Description:
Do you want to help change the world? If so, read on…

We are currently seeking a Hardware Reliability Test Engineer who can really shine! This important role supports the test automation/hardware reliability verification effort and will contribute to the business goal of ensuring the most efficient, and reliable microinverter systems, by establishing the most effective test practices. What you can look forward to:

Automating data collection and analysis to achieve optimal results

Working with cross-functional teams to resolve issues in a timely manner

Applying reliability testing principles and practices towards completion of goals

Developing detailed understanding of product design and implementation

Applying product knowledge and reliability testing principles towards the development of test software for data collection and analysis in a very large reliability test environment

Performing unit test of own code, conduct code review and support existing test software

Facilitating the efficient collection of test data and report test outcomes by collecting, analyzing, interpreting, summarizing and displaying data

What you will need to do it well:

BS/MS in Electronic Engineering, Computer Science or equivalent

5+ years recent experience in a senior role in the area of product verification or manufacturing test development

Experience with Design of Experiments (DOE) and Reliability testing preferred. HALT/HASS, Relex or Reliasoft knowledge is a plus (+)

Experience with Python, C++/C# or other object-oriented programming language is required. Python is preferred. Test automation experience is a plus (+)

Some experience with power supplies, inverters or solar power is strongly desired

Background in Hardware Debugging and Hardware Quality Assurance Process

Extreme attention to detail

Good working knowledge of process improvement

Enea will not sponsor applicants for work visas for this position.

Job Number: WW102717ENP
Job Location: Santa Clara/Petaluma, CA
Per Diem: YES
Overtime: YES
Duration: 12 MONTHS
Start Date: Nov 15th
Input Date: 12/04/2017
Last Updated: 12/07/2017

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Hardware Systems Test Automation Engineer

Description:
About Enea
Enea is a global supplier of network software platforms and world class services, with a vision of helping customers develop amazing functions in a connected society. We are committed to working together with customers and leading hardware vendors as a key contributor in the open source community, developing and hardening optimal software solutions. Every day, more than three billion people around the globe rely on our technologies in a wide range of applications in multiple verticals – from Telecom and Automotive, to Medical and Avionics. We have offices in Europe, North America and Asia, and are listed on Nasdaq Stockholm. Discover more at www.enea.com and start a conversation at info@enea.com.

Do you want to help change the world? If so, read on…
We are currently seeking a Hardware Reliability Test and Automation Engineer who can really shine! This important role supports the test automation/hardware reliability verification effort and will contribute to the business goal of ensuring the most efficient, and reliable microinverter systems, by establishing the most effective test practices.

What you can look forward to:
Automating data collection and analysis to achieve optimal results
Working with cross functional teams to resolve issues in a timely manner
Applying reliability testing principles and practices towards completion of goals
Developing detailed understanding of product design and implementation
Applying product knowledge and reliability testing principles towards the development of test software for data collection and analysis in a very large reliability test environment
Performing unit test of own code, conduct code review and support existing test software
Facilitating the efficient collection of test data and report test outcomes by collecting, analyzing, interpreting, summarizing and displaying data
What you will need to do it well:
BS/MS in Electronic Engineering, Computer Science or equivalent
5+ years recent experience in a senior role in the area of product verification or manufacturing test development
Experience with Design of Experiments (DOE) and Reliability testing preferred. HALT/HASS, Relex or Reliasoft knowledge is a plus (+)
Experience with Python, C++/C# or other object-oriented programming language is required. Python is preferred. Test automation experience is a plus (+)
Some experience with power supplies, inverters or solar power is strongly desired
Background in Hardware Debugging and Hardware Quality Assurance Process
Extreme attention to detail
Good working knowledge of process improvement

Job Number: WW090717ENP
Job Location: Petaluma, CA
Per Diem: YES
Overtime: YES
Duration: 1 YEAR
Start Date: ASAP
Input Date: 12/04/2017
Last Updated: 12/07/2017

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
IT Specialist Sr.

Description:
Application Release Automation Expert:
There is an opportunity for a Release Automation Expert. This position requires a strong IT Technologist proficient in Release Management, Software Configuration, and Application Lifecycle Management. The successful candidate will be able to help the organization achieve its DevOps goals of delivering advanced software deployment automation. Plus, work with software developers to design and develop deployment automation that supports Continuous Integration and Continuous Development (CI/CD) activities.

Job Responsibilities: Conduct normal business hours and off hours software deployments using customized processes, and configuration management controlled methodologies in accordance with standard deployment processes. Drive automation and enhancement of deployment process. Adhere to the use of Standard Code Repositories ( TFS and SVN ) for application Software Configuration Management. Include tool administration, establishment and enforcement of branching architecture, and change management through automated promotions, builds, and deployments. As well as support the installation, configuration, security, operation, and maintenance of business web applications, and software. Desired Skills: Proficient with standard source control tools (TFS, Visual Studio / SVN, Jenkins); Windows PowerShell and Unix/Linux Shell scripting Basic Knowledge of Microsoft SQL Server and Oracle database knowledge; Maven and ANT; Wildfly 10 for Java application deployments; Active Directory, DNS, IIS, SSL, SMTP, LDAP and NLB (or other load-balancing technologies); Subversion; Jenkins; Troubleshoot server and farm installations, including web.config, SharePoint Logs, SQL Logs, SQL Profiler Experience with the following is a plus, Automated deployment tools (TFS Release Management); PPMC; Eclipse; Citrix XenApp / XenDesktop product family; Group Managed Service Accounts; Working with DMZs and SAZs; Amazon Web Services and/or Microsoft Azure, Pivotal Cloud Foundry; Jiri; Git

Job Number: 7844504
Job Location: Richardson, TX
Rate: $90-95 HR
Duration: 12 Months
Start Date: ASAP
Input Date: 11/14/2017
Last Updated: 01/10/2018

Firm Name: MIDCOM CORPORATION
Attention: Maurice Bradford
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Information System Security Officer (ISSO) with active secret FL

Description:
Job Title: Information System Security Officer (ISSO)
Keywords:
Number of Positions: 1

Remaining Positions: 1

Duties:
** An active SECRET (or higher) DoD Security Clearance is required **

** A current DoD 8570 Baseline Certification (Security+ CE, CAP, GSLC, CASP CE, CISA, CISM, or CISSP) is required **

** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

-The ISSO is responsible for ensuring the appropriate operational security posture is maintained for an information system (IS) and as such, works in close collaboration with the Information System Security Manager (ISSM).

-The ISSO shall have the detailed knowledge and expertise required to manage the security aspects of an IS and is assigned responsibility for the day-to-day security operations of a system.

-Responsibilities also include physical and environmental protection, personnel security, incident handling, and security training and awareness.

-In close coordination with the ISSM, the ISSO plays an active role in monitoring a system and its environment of operation to include developing and updating the System Security Plan (SSP), managing and controlling changes to the system, and assessing the security impact of those changes.

Responsibilities of the ISSO include, but are not limited to:

a. Ensure systems are operated, maintained, and disposed of in accordance with security policies and procedures as outlined in the security authorization package;

b. Attend technical and security training (e.g., operating system, networking, security management) relative to assigned duties;

c. Ensure all users have the requisite security clearances, authorization, need-to-know, and are aware of their security responsibilities before granting access to the IS;

d. Report all security-related incidents to the ISSM;

e. Conduct periodic reviews of ISs to ensure compliance with the security authorization package;

f. Serve as member of the CCB, if designated by the ISSM;

g. Coordinate any changes or modifications to hardware, software, or firmware of a system with the ISSM prior to the change;

h. Formally notify the ISSM when changes occur that might affect system authorization;

i. Monitor system recovery processes to ensure security features and procedures are properly restored and functioning correctly;

j. Ensure all IS security-related documentation is current and accessible to properly authorized individuals;

k. Ensure audit records are collected and reviewed; and

l. ISSO shall be adequately trained and possesses technical competence commensurate with the complexity of the ISs.

Skills:
Minimum Qualifications

- Current SECRET (or higher) DoD Security Clearance

- Current DoD 8570 Baseline Certification (Security+ CE, CAP, GSLC, CASP CE, CISA, CISM, or CISSP)

- Experience with Microsoft Windows and/or Linux system administration (2+ years)

- Familiarity with configuration control and change management (SCCM)

- Experience with networking concepts (switches, network security, TACLANE)

- Experience with security concepts (Data Loss Prevention, Active Directory, and Security Log Analysis)

- Active and continuous learner - either higher education or Continuing Professional Education

Required Competencies

- Strong written and verbal communication skills; ability to present reports to management; motivated to thoroughly investigate, analyze, and document system issues and resolutions

- Ability to produce quality deliverables and to complete assigned projects on time; provides consistent status updates to ensure IT security projects stay focused

- Consistent attention to detail - completes tasks per standard operating procedures; reports discovered anomalies and inconsistencies

- Persistent and creative problem solver - strong troubleshooting skills and determined to find solutions to technical problems; identifies root cause and presents possible solutions to management

- Strong work ethic and a proven professional - respectful, dependable, takes initiative and follows through, dedicated to excellence and getting the job done

Preferred Competencies

- Operating System and networking certifications

- Knowledge of and experience with compliance to government regulations and standards (NIST Special Publications, NISPOM, Risk Management Framework, etc.)

- Direct experience with a Department of Defense (DoD) or Defense Industrial Base (DIB) company supporting critical information systems

Additional Details

The ideal candidate for this position must be able to:

- Report to work on time

- Perform job duties for a specific duration of time or within a given period of time

- Follow directions based on government requirements and company policies

- Interact well with co-workers and customers

- Accept constructive criticism

- Maintain regular/consistent attendance and a full-time schedule

- Maintain current status on projects

- Stay current on training requirements

- Solve issues and incidents in the field and be willing to work after hours as needed to complete an urgent and important task

- Effective service depends upon the contractors performing duties to the best of their abilities; frequent absences will disrupt business operations and create additional work for coworkers; prompt and regular attendance is critical to the success of the company's mission.

Education:
- Undergraduate degree in Information Technology or Cyber Security, but candidate with proven experience will not be excluded from consideration

- Current DoD 8570 Baseline Certification (Security+ CE, CAP, GSLC, CASP CE, CISA, CISM, or CISSP)

Skills:
Required

CYBER SECURITYLINUX

State/Province: Florida
City/Town: Jupiter

Start Date: 01/08/2018 Hours Per Week: 40.00
Est. End Date: 06/29/2018 Hours Per Day: 8.00
Schedule Notes: Days Per Week: 5.00

Job Number: MB-7631875
Job Location: Jupiter, FL
Rate: 52/hr max
Duration: 6 month contract
Input Date: 12/07/2017
Last Updated: 02/02/2018

Infrastructure Engineer -Secret Clearance

Description:
PDS Tech, Inc is seeking a candidate for the Infrastructure Engineer- Secret Clearance position located in Aurora, CO.
You will be responsible for deploying and integrating scripts and recipes to automate Systems configurations and COTS configurations in complex server environments.
These environments, a mix of servers, workstations, and custom hardware, provide the backbone for the operational system of a critical, strategic national asset.
The environments also support product development, testing, and maintenance.
The candidate would be responsible for implementation of automation recipes (Chef) and scripts (Ruby, PowerShell, Python and others) as part of an automated installation process.
The ideal candidate will be a self-starter, have an engineering mindset, and be able to troubleshoot complex problems.
This position may require some on call support and overtime as well as limited (<20%) travel for installation and troubleshooting support.
US citizenship is required due to the candidate needing a current US secret security clearance.
Requirements:
•Must possess an active US DoD Secret or higher clearance US Citizenship
•For G10 = 8+ years of relevant Infrastructure/IT experience related to system installation and configuration
•Background in Systems Operations environment supporting complex environment deployment and management activities
•Experience with automation tools such as Chef (preferred), Puppet, Ansible, SaltStack, Fabric or similar products for O/S builds, software installation and configuration
•Hands-on experience with virtualization tools and cloud computing, either private (VMware, OpenStack) or public (AWS)Systems integration experience
•Ability to troubleshoot complex configuration problems or system issues
•Experience with Windows or Linux System Administration
•Strong scripting skills (i.e. PowerShell, Python, Ruby, bash, etc.)
•Ability to communicate clearly and effectively both written and oral

Desired Skills:
•Experience with orchestration tools – Rundeck, VMware Orchestrator
•Understanding of Infrastructure as Code and demonstrated implementation
•Understanding of DevOps concepts
•Experience with VMware– vCenter, ESXi, vSphere
•Understanding of Change Management processes - Version Control of software and code - GIT, CVS
•The ability to effectively plan their own work up and the work of others on the team\

Required Education:
Bachelor Degree in Information Systems, Information Technology, Management Information Systems, Computer Science, Computer Engineering, Computer Information Systems, Computer Systems Engineering and eight years of related work experience or equivalent combination of education and experience (technical Bachelor Degree = additional 8 years of related work experience).

Job Number: 1710077401
Job Location: Aurora, CO
Duration: 12 months
Input Date: 11/09/2017
Last Updated: 07/17/2018

Infrastructure Engineer -Secret Clearance

Description:
PDS Tech, Inc is seeking a candidate for the Infrastructure Engineer- Secret Clearance position located in Aurora, CO.
You will be responsible for deploying and integrating scripts and recipes to automate Systems configurations and COTS configurations in complex server environments.
These environments, a mix of servers, workstations, and custom hardware, provide the backbone for the operational system of a critical, strategic national asset.
The environments also support product development, testing, and maintenance.
The candidate would be responsible for implementation of automation recipes (Chef) and scripts (Ruby, PowerShell, Python and others) as part of an automated installation process.
The ideal candidate will be a self-starter, have an engineering mindset, and be able to troubleshoot complex problems.
This position may require some on call support and overtime as well as limited (<20%) travel for installation and troubleshooting support.
US citizenship is required due to the candidate needing a current US secret security clearance.
Requirements:
•Must possess an active US DoD Secret or higher clearance US Citizenship
•For G09 = 6+ years of relevant Infrastructure/IT experience related to system installation and configuration
•Background in Systems Operations environment supporting complex environment deployment and management activities
•Experience with automation tools such as Chef (preferred), Puppet, Ansible, SaltStack, Fabric or similar products for O/S builds, software installation and configuration •Hands-on experience with virtualization tools and cloud computing, either private (VMware, OpenStack) or public (AWS)Systems integration experience
•Ability to troubleshoot complex configuration problems or system issues
•Experience with Windows or Linux System Administration
•Strong scripting skills (i.e. PowerShell, Python, Ruby, bash, etc.) •
Ability to communicate clearly and effectively both written and oral

Desired Skills:
•Experience with orchestration tools – Rundeck, VMware Orchestrator
•Understanding of Infrastructure as Code and demonstrated implementation
•Understanding of DevOps concepts •Experience with VMware– vCenter, ESXi, vSphere
•Understanding of Change Management processes - Version Control of software and code - GIT, CVS •The ability to effectively plan their own work up and the work of others on the team\

Required Education:
Bachelor Degree in Information Systems, Information Technology, Management Information Systems, Computer Science, Computer Engineering, Computer Information Systems, Computer Systems Engineering and six years of related work experience or equivalent combination of education and experience (technical Bachelor Degree = additional 8 years of related work experience).

Job Number: 1710077409
Job Location: Aurora, CO
Duration: 12 months
Input Date: 11/09/2017
Last Updated: 07/17/2018

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Instrument Project Engineer - Refinery Exp (TX)

Description:
THIS IS NOT FOR AN INTERN, THIS POSITION REQUIRES AT LEAST 10-15 YEARS OF EXPERIENCE.

Basic Function
An Instrument Project Engineer (IE) is responsible for the design and implementation of process instrumentation from initial conception through field installation. They are responsible for designs that provide the most reliable and cost-effective instrument systems. In addition, the IE provides consulting services to process designers in developing process design specifications, develops operating and training manuals for mechanical and process personnel and participates in training operating personnel.

An IE:
• Writes purchase and construction specifications and writes and performs Factory Acceptance Tests.
• Uses vendor software programs for sizing safety and control valves.
• Specifies, procures, and configures Programmable Logic Controllers (PLC) and field hardware such as transmitters, controllers, pneumatic and electronic transmission system.
• Utilizes standards and best practices from American Petroleum Institute (API) and International Society of Automation (ISA), National Fire Protection Association (NFPA) to perform the above functions.

Responsibilities.
The Instrument and Controls Engineer may be responsible for:
• Function as project engineer on instrumentation and capital projects and large maintenance projects.
• Taking lead role on Instrumentation and controls capital projects including PLCs.
• Help identify areas where instrumentation/controls can improve plant operations and profitability.
• Developing capital and expense budget requirements related to instrumentation system upgrades, PM/PdM programs, repairs, expansions, etc.
• Serving as a technical resource to properly identify new and existing equipment specifications and proper operating parameters/ranges for instrumentation equipment.
• Overseeing application and interpretation of National Electric Code and other applicable city, state, federal codes and standards (e.g. NPRA, NFPA, API, ISA).
• Interact with Engineering and Construction contractors, both on-site and off-site.
• Leverage the application of instrumentation safety standards, mechanical integrity, design and maintenance.
• Using documentation systems and processes that maintain accurate instrumentation information and drawings.
• Support criticality assessments of the plant's instrumentation equipment.
• Design and evaluate Refinery Safety Instrumented Systems (SIS). Perform Safety Integrity Level (SIL) analysis and engineering upgrades of safety instrumented systems.

Basic Required Qualifications.
• Must be legally authorized to work in the United States, at least 18 years of age and possess a valid driver’s license.
• Must possess a bachelor’s degree in Electrical Engineering, Chemical Engineering, Mechanical Engineering, or Industrial Engineering.
• Must have three or more years of instrumentation experience and three or more years of direct experience in a refinery, chemical and/or manufacturing industry.
• Demonstrated knowledge and use of SPI (InTools) database and specifications.
• Proficient in the specification, troubleshooting, maintenance and overhaul of process control values.
• Demonstrated knowledge of PLC's.
• Proficient in MS office (Word, Excel, Outlook, Projects).
• Must be willing and able to perform, comply with the following:
• Wear Nomex fire retardant clothing and personal protective equipment (such as steel-toe shoes, ear, and eye protection).
• Maintain face daily so that a respirator/face mask can seal properly (some examples include being free of facial hair and/or clean shaven), climb up to 200 feet in height and work in enclosed spaces such as tanks and silos

Preferred Qualifications:
• Industry certifications (ISA)

FOSTER DESIGN'S BENEFITS:
• Working for a 54-year old company
• Minimum 10 Paid Holidays with no waiting period
• Immediate 401K participation, 1 year 100% vesting schedule, matching employer contribution
• Free Financial Consultant
• Medical/Dental/Vision/Prescription card – BCBS
• MetLife – Long Term Disability Insurance
• Vacation Pay
• Per Diem Assignment Allowance, when applicable
• Per Diem Split, when applicable
• Paid Weekly (Direct Deposit)

Job Number: FD-021618TX
Job Location: Borger, TX
Rate: $BOE/HR
Per Diem: Possible
Overtime: Possible
Duration: 11 Months or linger
Start Date: 03/26/2018
Input Date: 03/08/2018
Last Updated: 03/21/2018

Firm Name: FOSTER DESIGN INC
Attention: Recruiter
Address: 200 W DOUGLAS AVE STE 110
City, State: WICHITA, KS 67202
Phone: 316/832-9700
800 Phone: 800/345-3394
Fax Phone: 316/832-9357
Website: www.fosterdes.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Integration and Test Engineer - Level 2

Description:
Integration and Test Engineer - Level 2 (ACTIVE DoD SECRET CLEARANCE REQUIRED)

Location: Moorestown, NJ
Pay Rate: DOE ($47/hr - $57.50/hr)
Duration: 1 year W2 contract
Shift: First, 9/80, exempt OT
Travel: Yes, to be determined
**MUST be a U.S. CITIZEN**
**MUST have an ACTIVE DoD SECRET CLEARANCE – INTERIM SECRET CLEARANCE is SUFFICIENT**

Description
The candidate will perform the unit level test, engineering integration and test, engineering test & evaluation and support system level testing of COTS or custom computing hardware and real-time embedded signal processing firmware/software applications.
This engineer will be responsible for performing software/firmware development assignments from requirements through final testing.
This engineer will work with domain experts and military documentation to develop test software requirements, procedures, code and execute the tests.
This candidate will be responsible for designing and implementing system components using Object Oriented methods in C++.
This candidate should have an academic background and experience in: digital signal processing implementation, C/C++ programming, and simulation tools such as MATLAB.
The candidate must have excellent organizational skills, interpersonal skills and be able to communicate at both programmatic and technical levels with subordinates, peers, senior management levels and the customer.

Skill/Experience/Education (Mandatory):
ACTIVE DoD SECRET CLEARANCE
BS Degree in Electrical Engineering or Electrical and Computer Engineering.
Minimum of 8 years of professional level experience testing hardware subassemblies, nests, cabinets and systems for functional and performance requirements.
Experience in testing digital signal processing hardware and real-time software applications using C++ Object Oriented design and programming.
Configuration management and change management experience using ClearCase, ClearQuest and UCM.

Desired:
Simulation tools experience such as Matlab.

Job Number: 8327
Job Location: Moorestown, NJ
Rate: 47-57.50
Per Diem: Split Possible
Overtime: Exempt
Duration: 1 year
Start Date: ASAP
Input Date: 02/20/2018

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Laser Tracker Operator

Description:
Must be US citizen in order to comply with ITAR regulations on this project

Unique Skills:
• This job involves extensive Laser Tracker work on the shop floor. Experience with Laser Trackers is a must
• Ability to read/understand complex blueprints, sketches, verbal instructions and tools.
• Tooling experience and/or relevant training preferred.
• Experience with using precision 3D measurement devices to locate and assemble parts or tools.
• Must be proficient in the use of laser trackers.
• Experience with Metrolog X4 or X4V5 software preferred.
• Experience with Catia V5 software preferred.

Principle Duties and Responsibilities:
• Interpret & consolidate aircraft engineering, tooling designs and production requirements, to develop optimized measurement plans and processes.
• Under minimal supervision, develop programing for all measurement equipment that will be used in the development, manufacture and support of aircraft.
• Collaborate with engineering, tooling, manufacturing engineering and operations to determine optimal manufacturing procedures.
• Assist in developing and documenting standards for the handling and utilization of metrology equipment.
• Create standardized inspection reports through the utilization of Metrologic software.
• Study and optimize equipment performance for increased capacity and equipment efficiency.
• Interact and collaborate with equipment vendors on warranty repairs, necessary improvements and upgrades.
• Set up and utilize precision measuring tools; validates measurement results for accuracy and repeatability.
• Provide and/or contribute to the documentation of new or recent processes involving metrology techniques or equipment.
• Coordinate the implementation of projects between multiple organizations.
• Support all Safety, Sustainability and Ergonomic Initiatives.
• Work to improve daily processes, and ensures all work meets customer requirements.
• Assist tool shop as needed, during periodic and conformity Inspections.
• Provide input toward the selection of metrology equipment and software.

Education and Experience Requirements:
• Bachelor's Degree in Mechanical Engineering or a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Eighteen (18) months of Metrology Engineering, Manufacturing Engineering, Automation Engineering or related technical experience.

Job Number: 24-211
Job Location: Savannah, GA
Rate: $50 - $55
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 11/16/2017
Last Updated: 02/06/2018

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Lead Systems Engineer

Description:
Lead System Engineer

Location: Windsor Locks, CT
Pay Rate: $75/hr
Duration: 1 year W2 contract
Shift: First, 8:00am to 5:00pm
**MUST be a U.S. CITIZEN**

Description/Comment:
An EMU Systems Engineer is a versatile professional with a base degree in Mechanical, Chemical, or Aerospace Engineering and experience in one or more disciplines such as electro-mechanical design, test, mechanical design, or analysis. Cross-functional experience is highly desired.

This Company at Windsor Locks was originally the Prime Contractor for NASA’s Extravehicular Mobility Unit and is currently responsible for the life support system (backpack) and other hardware. The EMU is a long standing system that has seen operation since 1981. As such, the ability to understand and build from previous analysis, design and fleet leader assessments is paramount. Reading engineering drawings, assessing operations and test sheets, as well as assessing data from ground and flight are all key abilities. EMU Systems Engineers are involved in assessing proposed engineering changes, making specification changes/updates, certification and recertification testing and reporting, customer interfacing for real time issues, monitoring system performance on EVA and many other related tasks, often involving customer interfacing.

Ability to perform gas and fluid analysis is important. Previous experience with High Pressure O2 is a big plus. Knowledge of the typical suite of MS products is required. Other software knowledge, including heat transfer, fluid and gas flow is a plus.

Both strong oral and written skills are required. Verbal and oral skills should be professional in character and precise. Candidates must be able to work in a small, highly scrutinized, tight knit team with the goal of crew safety as their defining characteristic.

Education/Requirements:
-Bachelors degree or higher
-Special NASA drug screen will be required post-employment

Job Number: 8280
Job Location: Windsor Locks, CT
Rate: 75
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/16/2017
Last Updated: 12/20/2017

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Machinery Designer

Description:
Designs components or portions of systems and modifies existing designs to develop or improve products and facilitate manufacturing operations. Utilizes computer-aided design equipment and/or graphic tools such as, CAD, CAM or CATIA. Gathers information, makes studies, computes calculations, and prepares original rough layouts, sketches to present design proposal. Coordinates design criteria with engineering, manufacturing, tooling, material, and planning group such as ease of manufacture, availability of materials, and contractual specifications. Exclude classifications in which incumbents predominantly perform drafting assignments.
This position may be filled from the entry level to the senior level of the job family. The position requires an Associate's degree in drafting/engineering technology or equivalent drafting experience, plus one year or more years of drafting/design experience preferred. Naval design experience is desirable.
A candidate must have a thorough knowledge of accepted design/drafting methods and concepts, and be familiar with basic engineering and design principles relating to machinery design work. The candidate for this position should be proficient in the use of 2D and 3D drafting software tools such as AutoCAD, Inventor and/or Siemens NX and have familiarity with Naval Machinery design in one or more of the following technical areas, including structural closures, Capstans, elevators, winches, hoists, hydraulics, arresting gear or other heavy mechanical components. Prior Aircraft Carrier Design experience is a plus.
Candidates must have experience with 2D and 3D CAD, Electrical Wire way designs, equipment arrangement layouts and/or cable routing experience.

Job Number: 7864214
Job Location: Newport News, VA
Rate: open
Per Diem: possible
Overtime: possible
Duration: 1 year
Start Date: 1/2/2018
Input Date: 11/24/2017

Firm Name: TASC TECHNICAL SERVICES
Attention: Stephen
Address: 73 NEWTON RD
P O BOX 1315
City, State: PLAISTOW, NH 03865
Phone: 603/382-1114
Fax Phone: 603/382-2377
Website: www.tasctech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Maintainability Eng III

Description:
Maintainability Eng III
Savannah, GA
Rate: $58-$63

Unique Skills:

Prior experience in development of Maintainability Predictions and analysis per MIL-HDBK-472, Human Engineering Design Guidelines per MIL-HDBK-759, Mean-Time-To-Repair (MTTR), assessing aircraft modifications for Maintainability impacts, CATIA V5 including Human Builder & Kinematics, and Reliasoft reliability & maintainability software are desired. Candidates with prior US military aircraft maintainer or air crew experience strongly preferred.

Education and Experience Requirements:

Bachelors degree in aviation maintenance, engineering technology, or a related curriculum; or an equivalent combination of education and experience sufficient to perform the essential functions of the job. A&P license preferred. Six (6) years of Maintenance Programs/Maintainability experience or aircraft maintenance and operational experience.

Position Purpose:

Responsible for participating in the planning, development, and sustainment of Company Aircraft Maintenance Programs and related issues regardless of complexity.

Principal Duties and Responsibilities:

Essential Functions: 1. Share responsibility for planning, developing, and sustainment of new and existing Aircraft Maintenance Programs and engineering projects of major complexity within established scope, meeting requirements of FAR 25.1529 or other applicable regulatory directives. 2. Maintain a current knowledge of developments in the field of specialty and/or other related aircraft fields and provide recommendations to department management for process/procedure changes to prepare for new standards and implementation of new methodologies. 3. Meet cost and schedule requirements while ensuring accuracy and consistency. 4. Develop standards and guides to support Maintenance Programs activities. 5. Mentor other team members in areas relative to Maintenance Programs processes and procedures. 6. Engage with internal/external stakeholders to ensure department deliverables are being met or exceeded. 7. Recommend innovations that improve collaboration, communication, quality, and/or effectiveness of product. 8. Review, and provide feedback on written work of team members. 9. Perform other duties as assigned.

Other Requirements: 1. Demonstrated in-depth knowledge of MSG-3 and Maintenance Review board (MRB) processes and methodology.

Job Number: 8313
Job Location: Savannah, GA
Rate: $58-$63
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/27/2017
Last Updated: 02/19/2018

Firm Name: INCONEN CORPORATION
Attention: Cathy O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Maintainability Engineer

Description:
Position Purpose:
Responsible for participating in the planning, development, and sustainment of Aircraft Maintenance Programs and related issues regardless of complexity.

Unique Skills:
• Prior experience in development of Maintainability Predictions and analysis per MIL-HDBK-472, Human Engineering Design Guidelines per MIL-HDBK-759, Mean-Time-To-Repair (MTTR), assessing aircraft modifications for Maintainability impacts, CATIA V5 including Human Builder & Kinematics, and Reliasoft reliability & maintainability software are desired.
• Candidates with prior US military aircraft maintainer or air crew experience strongly preferred.

Education and Experience Requirements:
• Bachelor’s degree in aviation maintenance, engineering technology, or a related curriculum; or an equivalent combination of education and experience sufficient to perform the essential functions of the job. A&P license preferred.
• Six (6) years of Maintenance Programs/Maintainability experience or aircraft maintenance and operational experience.

Principal Duties and Responsibilities:
• Share responsibility for planning, developing, and sustainment of new and existing Aircraft Maintenance Programs and engineering projects of major complexity within established scope, meeting requirements of FAR 25.1529 or other applicable regulatory directives.
• Maintain a current knowledge of developments in the field of specialty and/or other related aircraft fields and provide recommendations to department management for process/procedure changes to prepare for new standards and implementation of new methodologies.
• Meet cost and schedule requirements while ensuring accuracy and consistency.
• Develop standards and guides to support Maintenance Programs activities.
• Mentor other team members in areas relative to Maintenance Programs processes and procedures.
• Engage with internal/external stakeholders to ensure department deliverables are being met or exceeded.
• Recommend innovations that improve collaboration, communication, quality, and/or effectiveness of product.
• Review, and provide feedback on written work of team members.
• Demonstrated in-depth knowledge of MSG-3 and Maintenance Review board (MRB) processes and methodology.

Job Number: 24-219
Job Location: Savannah, GA
Rate: $58 - $63
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 02/22/2018
Last Updated: 03/06/2018

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manager Sales and Marketing - NTD

Description:
SUMMARY STATEMENT
Develops solutions to a variety of complex and unusual problems that require independent judgment and ingenuity to modify procedures standards related to Sales, Strategy and Marketing. Work is accomplished under general direction and completed work is reviewed for results.

ESSENTIAL FUNCTIONS AND KEY RESPONSIBILITIES
Accomplishes results through direct reports and staff working within established organizational objectives. Performs typical responsibilities of management requiring planning, evaluating, organizing, integrating, and coaching. Work is reviewed for adequacy in meeting cost, schedule and quality objectives.

Performs analysis to support due diligence reviews of new business opportunities. Coordinates responses to requests for proposals to ensure responses are correctly priced and meet the requirements of the customer as defined in the request for proposal.

Receives, coordinates and interprets new and current contracts requested by customer. Represents the Company and negotiates contract changes and amendments with the customer.

Researches market conditions and conducts feasibility studies to determine market demand for existing and new products or services. Identifies and projects the potential of the Company to enter into or increase market share within the transparency markets. Develops strategic marketing and business plans to increase the number of Company products and products lines in the market to meet revenue goals. Identify market growth opportunities and present these as part of new product development requirements.

Supervises initiatives for new product development based on analysis of the potential market. Provides analytical support for comprehensive business plans, including business modeling and business case/plan, customer segmentation, entry strategy, pricing, operations, technical requirements, risk evaluation, etc.

Partners with management to develop and execute comprehensive short and long-term sales plans and programs that will achieve the sales and revenue objectives of organization.

Contacts established and prospective customers in the assigned area to solicit orders in person or by phone. Discusses suitability of different types of products or services that will meet customer requirements. Quotes prices and credit terms and assists in preparation of sales contracts for orders obtained. Investigates and resolves customer problems with deliveries.

Prepares briefings and reports for executive management quarterly and/or as the business situation requires.

ANCILLARY JOB FUNCTIONS AND RESPONSIBILITIES
Performs other duties as required. These duties may include assignments in job classifications other than the primary assignment.

JOB QUALIFICATIONS
Formal Education, Training, and Professional Certification and Work Experience:
Bachelor Degree in an or other appropriate discipline from an accredited four-year college or university and eight (8) or more years related experience and training, or equivalent combination of education and experience. MBA preferred but not required. Previous aviation experience preferred but not required.

STAKEHOLDER BEHAVIORAL STANDARDS
All Stakeholders: Integrity, Teamwork, Communications, Customer Focus, Initiative and willingness to assist and transfer technical knowledge to less experienced Stakeholders.

ALL LEADERS
Approachability, Drive for Results, Motivating Others, Managerial Courage, Decision Quality.

ALL MANAGERS
Priority Setting, Planning and Delegation.

STANDARD JOB REQUIREMENTS
Must be able to arrive at work on time, work on-site, and attend regularly.
Must be able to read and write the English language, perform basic mathematical calculations and learn to interpret and comprehend company policies, procedures, safety instructions, and other like documents used in an aerospace manufacturing environment.
Competent in the use of standard software applications such as Microsoft Word and Excel and operate standard office equipment.
Make telephone and direct personal contact with internal and external personnel and make formal presentations to small or large groups.
Perform work of subordinates.

SPECIAL JOB REQUIREMENTS
Prior management and contract negotiation skills.
Sales and customer service experience.
Flexibility to respond to off-hours business needs
Freedom to travel domestically and internationally

SPECIAL TRAINING
Safety training applicable to the job and the general work area.

PHYSICAL REQUIREMENTS
While performing the duties of this job, the Stakeholder is regularly required to sit; use hands to finger, handle, or feel objects, tools or controls; reach with hands and arms; talk and hear. The Stakeholder frequently is required to move from one place to another. The Stakeholder must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, and ability to adjust focus. Travel between facilities. Must be able to work in excess of eight (8) hours per day and five
(5) days per week, if required. NRD: Must be able to ascend and descend stairs.

WORK ENVIRONMENT
Must be able to tolerate exposure to dust, fumes, noise, temperature and other elements in the shop area, if required. The noise level in the work environment is usually moderate.

MENTAL REQUIREMENTS
Able to work as a team member, highly organized, work well under stress and handle multiple priorities. Must possess interpersonal and communication skills to interact with other people inside and outside the company.

Job Number: 17-788-13388
Job Location: Midwest
Rate: 110-115K
Per Diem: No
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 01/08/2018

Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer (15 plus needed)

Description:
Unique Skills:
• Catia V5, SAP and Solumina experience.

Principal Duties And Responsibilities:
• Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
• Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
• Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
• Investigate and assist in preparing justification for equipment and facility requests.
• Perform producibility studies from engineering drawings.
• Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
• Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures.
• Incorporate Lean Manufacturing Methodology into existing and future processes.
• Utilize CADAM/CATIA data and nesting software to generate flat patterns, Master Models, NC data, and ply nests to meet Engineering and Manufacturing requirements.
• With minimal supervision, lead/coordinate the implementation of projects between multiple organizations
• Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
• Support all Safety, Sustainability and Ergonomic Initiatives.
• Aid in development and maintenance of Business Continuity Plan.

Other Requirements:
• Proven knowledge of Lean and/or Six Sigma principles.
• Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
• Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, etc.
• Lean Six Sigma Greenbelt Certification or higher preferred.

Experience/Education:
• Bachelors degree in Mechanical, Manufacturing Engineering or related curriculum, or an equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Three (3) years Manufacturing Engineering, planning, or related technical experience.

Job Number: 24-206
Job Location: Savannah, GA
Rate: $50 - $55
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 02/22/2018
Last Updated: 03/19/2018

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer (Level 3 and 4)- Multiple locations

Description:
Manufacturing Engineer 3 and 4

Location: Ridley Park, PA
Duration: 6+ months

Description:
Develops and implements production and tooling methodologies. Participates on Integrated Product Teams (IPTs) to integrate technical solutions across multiple disciplines. Develops, identifies and implements conceptual designs and maintains the program architecture for build. Leads and implements manufacturing plans. Conducts producibility and variation analyses to ensure that manufacturing process capability matches requirements. Assists in providing producibility information for inclusion in project plans and helps document producibility best practices. Analyzes design/build concepts to evaluate producible design/build definitions. Resolves technical problems of significant impact to performance, cost or schedule. Coordinates and implements new engineering principles, theories, advanced technologies and concepts. Validates and ensures production readiness of solutions to complex problems. Implements lean principles and technologies.

Education / Experience:
Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.

Additional Comments:
The following skills are preferred and the level is intermediate.
MES - (SAP Complex Assy Solutions), Teamcenter (Siemens PLM Software), Assy and Integration, Composite Fabrication, Metal Bond, Model Based Instructions (MBI) Authoring, Tooling & Indexing, Wire & Equipment Installation, Sheet Metal/Flat Pattern

Skill Code: 66R-Assembly and Installation

Job Number: 17-12923
Job Location: Ridley Park, PA
Rate: Open
Per Diem: Yes
Overtime: Possible
Duration: 6 months
Start Date: Asap
Input Date: 11/28/2017
Last Updated: 01/24/2018

Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer 4

Description:
Contract Position; duration of 6 months. Need to be available to start 12/8/17

Job Description:

Leads (SME) Integrated Product Teams (IPTs) in analyzing product development, complex producibility studies and production/tooling philosophies.
Refines, validates, coordinates and implements conceptual designs and manages the program architecture for build.
Develops manufacturing plans and oversees plan optimization.
Conducts complex producibility and variation analyses to ensure that manufacturing process capability matches requirements.
Resolves complex technical problems.
Serves as a project manager to ensure that contract requirements, specifications, design criteria and schedule performance are integrated and maintained.
Leads advanced design solutions and supports research of new product or business opportunities.
Deploys company Lean Enterprise analysis methods.
Documents and communicates producibility best practices.
Provides guidance to others through structured mentoring.
Software: iMES, Vismockup & NX

Education / Experience:

Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience.

Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

This position requires the ability to pass a background check and drug screening prior to employment.

In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification form upon hire.

Job Number: Ph.# (636) 438-0314: 39831
Job Location: Kennedy Space Center, FL
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 11/17/2017
Last Updated: 12/06/2017

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Location: Savannah, GA
Rate: $50.00 - $55.00/HR
Duration: Long Term contract

**MUST be a U.S. Citizen or Permanent Resident**

Unique Skills:
Requires experience in aviation manufacturing. Requires experience in Solumina, Catia, Microsoft Office, and ERP software.

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.

Job Number: 8135
Job Location: Savannah, GA
Rate: $50.00 - $55.00/HR
Per Diem: Possible
Overtime: Possible
Duration: LT
Input Date: 12/05/2017
Last Updated: 01/12/2018

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Savannah, GA
Rate: $50-$55
Long Term contract
1st Shift

Unique Skills:
Knowledgeable with CATIA, SAP, Solumina software programs. Aircraft experience with aircraft shop support and creating work instructions.

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.

Job Number: 8217
Job Location: Savannah, GA
Rate: $50.00 -$55.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 03/21/2018
Last Updated: 04/24/2018

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer IV - (FL)

Description:
SEVERAL OPENINGS AT KENNEDY SPACE CENTER, FL.

Leads (SME) Integrated Product Teams (IPTs) in analyzing product development, complex producibility studies and production/tooling philosophies. Refines, validates, coordinates and implements conceptual designs and manages the program architecture for build. Develops manufacturing plans and oversees plan optimization. Conducts complex producibility and variation analyses to ensure that manufacturing process capability matches requirements. Resolves complex technical problems. Serves as a project manager to ensure that contract requirements, specifications, design criteria and schedule performance are integrated and maintained. Leads advanced design solutions and supports research of new product or business opportunities. Deploys company Lean Enterprise analysis methods. Documents and communicates producibility best practices. Provides guidance to others through structured mentoring.

Software: iMES, Vismockup & Unigraphics NX

Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

Job Number: MFGEfl
Job Location: Kennedy Space Center, FL
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 12/05/2017
Last Updated: 01/05/2018

Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer-FL

Description:
Manufacturing Engineer leads (SME) Integrated Product Teams (IPTs) in analyzing product development, complex producibility studies and production/tooling philosophies. Refines, validates, coordinates and implements conceptual designs and manages the program architecture for build. Develops manufacturing plans and oversees plan optimization. Conducts complex producibility and variation analyses to ensure that manufacturing process capability matches requirements. Resolves complex technical problems. Serves as a project manager to ensure that contract requirements, specifications, design criteria and schedule performance are integrated and maintained. Leads advanced design solutions and supports research of new product or business opportunities. Deploys company Lean Enterprise analysis methods. Documents and communicates producibility best practices. Provides guidance to others through structured mentoring. Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. Software: iMES, Vismockup & NX

Job Location: Kennedy Space Center, FL
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/18/2017
Last Updated: 01/05/2018

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer - Level 2

Description:
Location: Dallas, TX / Grand Prairie, TX
Rate: $60.00 - $65.00/HR
Duration: 1 year contract
Shift: 1st Shift

**MUST be a U.S. Citizen**
**MUST have an Active Secret Clearance or have had one within the last two (2) years**

Job Description:
- Mechanical Design Engineer to support the Tactical Missiles Advanced Programs (TMAP) area design effort.
- The candidate will work and support the lead design engineer to conduct integration activities, impact to the system, required sub-system/component modifications, and impacts to system performance studies.
- Tasks assigned may include generation of Interface Control Drawings (ICD), generation of Instructional Engineering Release (IER), creation of solid models and drawings, and performing tolerance analyses.
- Tasks will include conceptual and detail design of missile integration concept components, systems, and subsystems, and creation of 3D solid models and 2D drawings.
- Effort will require coordination of design(s) with other mechanical / electrical disciplines, familiarity with missile to aircraft integration concepts, and tolerance analysis.
- Must have Active Secret Clearance at time of submittal, preferably (but not required) within the last 5 years.
- Clearance status on resume required.

Skill/Experience/Education
Mandatory: (MUST BE SHOWN ON RESUME)
**MUST have an Active Secret Clearance or have had one within the last two (2) years**
- Candidate should have a Bachelors of Science degree in Mechanical Engineering, or 10 years of equivalent experience, and 6-8 years of Computer Aided Design software experience using PRO Engineer / CREO 3.
- Candidate must be capable of creating and interpreting detail, assembly, and installation type drawings, knowledge of Geometric Dimensioning and Tolerancing, and experience with manufacturing engineering and fabrication processes.
- Familiarity with Microsoft Office applications is desired.

Job Number: 7915
Job Location: Savannah, GA
Rate: $60.00 - $65.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 09/28/2017
Last Updated: 02/05/2018

Mechanical Engineer

Description:

PDS Tech, Inc. is seeking a Mechanical Engineer for a position located in Kansas City, MO.
Must hold an active clearance (preferably a DOE Q, or could be a DOD TS).

The Client's organization has several open opportunities for Mechanical Engineers. We are seeking engineers who are interested in supporting one or more of the following areas: product engineering, process engineering, purchased product engineering, systems engineering and mechanical testing. Job title will be commiserate with level of experience.

Completes assignments and provides detailed instructions in the design and/or project management of new and current projects, products, programs, components, tools and acceptance equipment under technical guidance of higher level engineers or departmental management
Participates in establishing operating procedures on new products and components
Assists in the development of test procedures and performance of routine to moderately complex engineering evaluation tests, product and process capability studies, quality audits, product or project data reviews, and other engineering evaluation work
Evaluates opportunities for defect prevention based on standard or accepted solutions
Prepares evaluation reports, analyzes discrepancies, and makes recommendations for product, test equipment, procedures and manufacturing or operating processes that improve productivity and quality and reduce flowtime
Assists in the preparation of product or project definitions, manufacturing drawings and specifications, and test equipment designs
Defines and acquires tooling, gaging and other equipment necessary to manufacture parts and to assure product quality
Interacts with design agencies, suppliers and/or internal organizations such as the Integrated Supply Chain to assist in resolving design, development, production and acceptance issues
Provides technical assistance in appropriate assigned field
Evaluates and makes recommendations regarding technological advances that improve productivity and quality,reduce flowtime, and enhance operational surety
May perform other duties as required
Conducts activities in a safe and healthy manner and works in accordance with established ES&H requirements to ensure the protection of associates, the public, and the environment. Takes actions necessary to stop work when an unsafe condition or action is identified. Every employee has the right and responsibility to stop work when unsafe conditions or actions are identified.

Basic Qualifications:

US citizenship in order to obtain and maintain US Dept of Energy "Q" level security clearance.
Bachelor of Science degree in Mechanical Engineering from an ABET accredited program or an equivalent ABET accredited engineering degree.
Minimum three (3) years of professional technical experience.
Proficiency in Microsoft Excel, Word and PowerPoint required

Additional Qualifications:

Hands-on experience with 3D design software like Creo or SolidWorks
Effective verbal, written and presentation skills
Knowledge of continuous improvement methodologies including Six Sigma
Previous experience in a manufacturing environment
Experience in engineering related administrative activities such as configuration management, financial reporting, product testing procedures & data entry preferred
Proven ability in decision making and organization, planning and problem solving skills
Ability to work under minimal supervision, with latitude for independent action and decision making.
Good people skills, ability to motivate teams to produce on-target and timely results.
Demonstrate project/program management via multiple priorities/projects
Ability to plan and organize, demonstrate excellent time management and support several projects at once
Willingness to travel on occasion

Job Number: 1710068729
Job Location: KS City, MO
Duration: 6 months
Input Date: 05/26/2017
Last Updated: 07/17/2018

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical System Design & Analysis Engineer 3

Description:
Mechanical System Design & Analysis Engineer 3

Location: Ridley Park, PA
Duration: 1 year

Job Description:
Supports the development and documentation of mechanical and fluid system and thermal environment requirements to establish the system design. Supports the development, maintenance or modification of system, component and installation designs/proposals to provide design documentation to downstream groups. Performs and documents analyses to validate and verify systems and components meet requirements and specifications. Contributes to supplier development, test and production activities and directs the supplier to optimize integration and achieve program goals. Supports system components'' designs/proposals standards to provide installation and detail documentation. Trains others. Works under general direction. Additionally. Develops, integrates and documents mechanical and fluid system and thermal environment requirements to establish the system design. Develops, maintains, or modifies mechanical and fluid system, component and installation designs, using 3-D Computer Aided Engineering tools and/or other design methods, to provide product definition to other engineering groups, production operations, suppliers and external customers throughout the product lifecycle. Performs, integrates and documents mechanical, fluid and thermal analyses and test results to validate and verify systems and components meet requirements and specifications. Manages supplier development, test and production activities and coordinates with the supplier to optimize the design and achieve program goals. Develops new design/analysis processes and tools to improve effectiveness, quality and efficiency of the development effort. Investigates emerging technologies to develop concepts for future product designs to meet projected requirements. Additionally. Thermal Analysis experience including hand calculation and software required. Thermal Desktop and/or JENA experience preferred.

Skill Code:
686-Envir Control & Thermal Analys

Education / Experience:
Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Additionally...Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

Job Description:
Develops, integrates and documents mechanical and fluid system and thermal environment requirements to establish the system design. Develops, maintains, or modifies mechanical and fluid system, component and installation designs, using 3-D Computer Aided Engineering tools and/or other design methods, to provide product definition to other engineering groups, production operations, suppliers and external customers throughout the product lifecycle. Performs, integrates and documents mechanical, fluid and thermal analyses and test results to validate and verify systems and components meet requirements and specifications. Manages supplier development, test and production activities and coordinates with the supplier to optimize the design and achieve program goals. Develops new design/analysis processes and tools to improve effectiveness, quality and efficiency of the development effort. Investigates emerging technologies to develop concepts for future product designs to meet projected requirements.

Education/Experience:
Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation
'Thermal Analysis experience including hand calculation and software required. Thermal Desktop and/or JENA experience preferred.”
Supplier due diligence required - Refer to supplier guidelines concerning education requirements ENG reqs on Supplier sharepoint

Education requirements: Client will require a minimum of a BS in either Mechanical Engineering, Civil Engineering or Aero/Astronautically Engineering or related discipline.

If interested then please share updated resume at ravi@iconma.com

Job Number: 17-20172
Job Location: Ridley Park,, PA
Input Date: 11/30/2017
Last Updated: 12/26/2017

Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 1201 PACIFIC AVE STE 600
City, State: TACOMA, WA 98402
Phone: 253/213-2012
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Systems Design & Analysis Engineer III - MO

Description:
SEVERAL OPENINGS IN THE ST. LOUIS, MO AREA

Active Secret Clearance, NOT REQUIRED to start.

Perform independently Air Vehicle Systems engineering tasks to sustain the fielded tactical weapons systems.
Design and apply engineering principles to mechanical systems and/or propulsion engineering.
Conduct retrofit/redesigns, system integration, and system troubleshooting for multiple hardware / software subsystems.
Perform product investigations on the fielded subsystems, completing failure/trend analysis on system hardware / software, and supporting qualification / fielding of product redesigns.
Interface directly with supplier and customer to communicate results of analysis and support issue resolution.
Work under general guidance of senior engineering and management to develop recommendations on improvements to the fielded systems / subsystems.
Work cross-functionally on a wide variety of technical issues.

Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.

CATIA V5, Enovia

Job Number: MechEngMO
Job Location: Berkeley, MO
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 11/15/2017
Last Updated: 12/18/2017

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Metrology Engineer II

Description:
Metrology Engineer II

Savannah, GA
Long Term Contract
Pay Rate: DOE

Unique Skills:

Required: Must be US citizen. Ability to read/understand complex blueprints, sketches, verbal instructions and tools. Tooling experience and/or relevant training preferred. Experience with using precision 3D measurement devices to locate and assemble parts or tools. Must be proficient in the use of laser trackers. Experience with Metrolog X4 or X4V5 software preferred. Experience with Catia V5 software preferred. ***This job involves extensive Laser Tracker work on the shop floor. Experience with Laser Trackers is a must.***

Education and Experience Requirements:

Bachelor's Degree in Mechanical Engineering or a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen (18) months of Metrology Engineering, Manufacturing Engineering, Automation Engineering or related technical experience.

Position Purpose:
Under minimal supervision, prepare, conduct, and evaluate for the implementation, programming and support of metrology equipment in tooling, program development and production. Assist with the improvements and problem solving for design and manufacturing issues related to tooling, material fabrication and assembly methods.

Principle Duties and Responsibilities:

Essential Functions:
1. Interpret & consolidate aircraft engineering, tooling designs and production requirements, to develop optimized measurement plans and processes. 2. Under minimal supervision, develop programing for all measurement equipment that will be used in the development, manufacture and support of Gulfstream aircraft. 3. Collaborate with engineering, tooling, manufacturing engineering and operations to determine optimal manufacturing procedures. 4. Assist in developing and documenting standards for the handling and utilization of metrology equipment. 5. Create standardized inspection reports through the utilization of Metrologic software. 6. Study and optimize equipment performance for increased capacity and equipment efficiency. 7. Interact and collaborate with equipment vendors on warranty repairs, necessary improvements and upgrades. 8. Set up and utilize precision measuring tools; validates measurement results for accuracy and repeatability. 9. Provide and/or contribute to the documentation of new or recent processes involving metrology techniques or equipment. 10. Coordinate the implementation of projects between multiple organizations. 11. Support all Safety, Sustainability and Ergonomic Initiatives.

Additional Functions:
1. Work to improve daily processes, and ensures all work meets customer requirements. 2. Assist tool shop as needed, during periodic and conformity Inspections. 3. Provide input toward the selection of metrology equipment and software. Perform other duties as assigned.

Other Requirements:
1. Extensive knowledge of metrology equipment, software and current measurement techniques. 2. Knowledge 3D CAD/CATIA modeling and an understanding of GD&T. 3. Knowledge of Lean and/or Six Sigma principles.

Languages Required (in addition to English): No Selection

Job Number: 8148
Job Location: Savannah, GA
Rate: DOE
Per Diem: Possible Split
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 10/27/2017
Last Updated: 01/24/2018

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
NC Programmer (WA)

Description:
NC Programmer provides numerical control, machining and programming technical experience. Establishes technical requirements for manufacturing and producibility. Plans, creates, verifies and revises Machine Control Data (MCD), geometry and documentation that directs the operations for a complete spectrum of numerically controlled equipment required to manufacture and inspect parts, tools and assemblies for departmental work. Plans and guides the development and integration of new machining techniques and manufacturing methods, processes, software and equipment. Works under general direction. NC Programmer with the following skills. Experience using MetrologXG version software to program Coordinate Measurement Machine (CMM) Preferred: Experience programming dual armed CMM using Metrolog software Skilled in knowledge and interpretation of Geometric Dimension and Tolerancing (GDT) 2+ years working with CATIA (or other Model Based Definition (MBD) software to access released engineering models and interrogate them for GDT and calculated measurements AA degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience.

Job Number: NCpuyallup
Job Location: Puyallup, WA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 01/30/2018
Last Updated: 02/23/2018

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
NC Programmer (Catia)

Description:
**This is a 2nd shift position (1:30pm to 10pm).

**Requires strong Catia NC Programming skills.

Provides numerical control, machining and programming technical experience. Establishes technical requirements for manufacturing and producibility. Plans, creates, verifies and revises Machine Control Data (MCD), geometry and documentation that directs the operations for a complete spectrum of numerically controlled equipment required to manufacture and inspect parts, tools and assemblies for departmental work. Plans and guides the development and integration of new machining techniques and manufacturing methods, processes, software and equipment. Works under general direction. NC Programmer with the following skills:
1. 1+ year experience using MetrologXG version software to program Coordinate Measurement Machine (CMM)
2. Preferred: Experience programming dual armed CMM using Metrolog software
3. Skilled in knowledge and interpretation of Geometric Dimension and Tolerancing (GDT)
4. 2+ years working with CATIA (or other Model Based Definition (MBD) software to access released engineering models and interrogate them for GDT and calculated measurements

AA degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience.

Job Number: 27957-1
Job Location: WA
Rate: open
Per Diem: split
Overtime: possible
Duration: 6 months
Start Date: asap
Input Date: 11/14/2017
Last Updated: 12/06/2017

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
NC Programmer (OK)

Description:
Provides numerical control, machining, and programming technical expertise to cross-functional engineering and manufacturing teams. Establishes technical requirements for manufacturing and producibility. Plans, creates, verifies, and revises machine control data and documentation that directs the operations for numerically controlled machines and robots required to manufacture and inspect parts, tools and assemblies. Plans and guides the development and integration of new machining techniques and manufacturing methods, processes, and software. Apply knowledge of engineering data, geometric dimensioning and tolerancing, and machine control languages in order to plan, create and revise machine-control data and associated inspection plans. Ability to create and revise measuring machine programs and/or computer generated solid models, statistical process-control graphic aids, in-process inspection graphic aids, and key characteristics media. Ability to create and/or validate machine-control data, inspection point coordinate data and documentation.

Requirements:
Level 3

Ed / Exper
Bachelor's and 6 to 9 years' related work experience, a Master's degree and 4 to 7 years' related work experience or an equivalent combination of education and experience

Must be available to work any shift

OT is as needed

No Travel associated with this position

Phone interviews will be conducted

SKILLS NEEDED:
SmartCam is needed
Strong 3/4 axis experience
Catia V5 is helpful but not needed
SAP is helpful but not needed

FOSTER DESIGN'S BENEFITS:
• Working for a 54-year old company
• Minimum 6 Paid Holidays
• Blue Cross Blue Shield – Group Medical Insurance Plan
• MetLife – Long Term Disability Insurance
• Immediate 401K participation, 1 year 100% vesting schedule, matching employer contribution
• Vacation Pay
• Paid Weekly (Direct Deposit)

Job Number: FD-568718OK
Job Location: McAlester, OK
Rate: BOE
Per Diem: Yes Possible-PlusPossible Split
Overtime: Yes, as needed
Duration: 6-11 Months or possibly longer
Start Date: 12/15/2017
Input Date: 12/07/2017
Last Updated: 12/07/2017

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
NC Programmer (OK)

Job Number: FD-553003OK
Job Location: McAlester, OK
Rate: BOE
Per Diem: Yes Possible-PlusPossible Split
Overtime: Yes, as needed
Duration: 6-11 Months or possibly longer
Start Date: 10/27/2017
Input Date: 12/07/2017
Last Updated: 12/07/2017

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Principal Structural Engineer -

Description:
Principal Structural Engineer

PE Required in state of CA

Local Candidates Only - No Relo

Ready to put your engineering expertise designing key oil and gas design projects- Do you enjoy being involved on a wide variety of engineering tasks on multiple, complex structural projects.

Company extensive experience in this field, combined with your advanced engineering knowledge, will move your career forward with opportunity to lead teams. We need our engineers to be versatile, enthusiastic to work in highly flexible, team-oriented environment and who have exceptional communication, analytical and leadership skills.

In this role you will design a variety of structures by applying advanced construction/engineering techniques and analysis. You will inspect site conditions to ensure suitability for the designed permanent works.

Give advice on constructed matters. Observe site safety procedures. You may be asked to inspect construction, including temporary works to ensure compliance with approved methods and contract requirements. Maintain records of inspections, work executed, etc.

RESPONSIBILITIES:

Working on construction site, assists Resident Engineer with implementing structural engineering practices and related standards.
Structural engineering systems subject matter expert
Develops and implements QA procedures to ensure quality control performed by others is properly implemented throughout the program and assigned projects.
Reviews standards for materials and equipment to ensure they are in accordance with the specifications and LEED sustainability plan.
Performs constructability, buildability, and maintainability reviews, especially as related to structural systems.
Reviews shop drawing and construction-phase submittals when issues arise that require specific technical assistance.
Provides input regarding all energy efficiency and performance standards.
Reviews design drawings and specifications at periodic check points as required by the PMP milestones.
Participates in value engineering and scope and budget reconciliation when required or requested.
Writes detailed reports related to structural engineering of projects and confers with project and program managers as requested.
Supports the needs of other discipline leads for input to their efforts.
Makes site trips to collect structural engineering related data and construction contractor performance.
Qualifications - External Qualifications:

10 to 12 years of structural engineering design experience with concrete and steel design experience in heavy industrial and oil/gas required
Bachelors degree in Civil engineering, with structural concentration
Professional Engineer registration REQUIRED
Proficiency in utilizing CAD and PC software engineering packages
Must meet customer security requirements and complete a background check by federal authorities

Job Number: 361461
Job Location: Bakersfield, CA
Rate: $62hr
Per Diem: no
Duration: temp to hire
Start Date: asap
Input Date: 10/26/2017
Last Updated: 01/08/2018