Job Search Results

798 listings were found that matched your search words: Keywords: Software ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2024/03/19 Tuesday 12:00AM Pacific Time by ContractJobHunter. )

Listings 1 - 798

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer with active secret / design of mechanical and electronic interfaces / integration test / serial buses C/C++ programming CA

Description:
160459
Requirement #AERO-REQ-0666
Work Location Palmdale, CA
Work Week 9/80
Priority High
Needed Date 11/27/2017
End Date 11/09/2018
Number of Resources 1
Security Clearance Secret

Title: Aeronautical Engineer

Description

Candidate will be responsible for designing and building a system integration laboratory (SIL). This effort includes design of mechanical and electronic interfaces to support software development, integration and test efforts. Candidate will have hands-on hardware experience and software skills. Candidate will be able to troubleshoot hardware/software integration issues and perform integration and test. Define, develop, analyze and coordinate SIL requirements, allocate requirements and define interfaces between subsystems. Effort also includes flow down of requirements to procurement specifications, and management of vendor selection and vendor performance, including verification of requirements. The candidate will support system/software verification and validation effort and customer reviews during all phases of system development. The candidate will develop and support integration and system check out (SCO) procedures on flight test article and support pre-flight and post-flight analysis and reviews. Good oral and written communication skills are required as is the ability to flex and adapt in a fast-paced team environment. Complex organization and documentation skills are required.

Skill/Experience/Education

Mandatory:

Final Secret Clearance.

Hardware and software integration experience.
Demonstrated ability to design and troubleshoot mechanical and electronic interfaces to support software development and test.
C or C++ programming experience.
Experience with serial buses.

Desired:

B.S. Degree or above in an Engineering Discipline Several years of laboratory experience


Interview Required Yes
OT Allowed Yes (OT Limitation: No)
Travel No
Non-Exempt

Rates
0-4 Yrs Pay Rate: 65.00 USD
5-8 Yrs Pay Rate: 70.00 USD
9+ Yrs Pay Rate: 75.00 USD
 
Job Number: JE-0666
Job Location: Palmdale, CA
Rate: 65-75/hr DOE
Duration: 12 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Engineers - Atlanta, GA

Description:
STS AeroStaff Services is hiring Aerospace Engineers in Atlanta, Georgia.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Duties:

• Perform research and surveys to determine the best methods to modify aircraft to accomplish project statements of work.
• Design new mechanical parts, assemblies and installations defining aircraft modifications.
• Perform analysis and substantiation of new parts and installations.
• Produce engineering drawings, reports, material lists and work instructions to document & install aircraft modifications.
• Provide engineering checks of data produced by peer groups or other project participants.
• Provide technical support during manufacturing and installation of aircraft modifications.
• Interface with customers, suppliers and other project stakeholders pertaining to modification projects.
• Provide guidance and oversight to engineering peer group, and mentor new engineers to operate within departmental practices and procedures.
• Provide statements of work, cost estimates, completion schedules and other project administrative inputs.
• Practice safety-conscious behaviors in all operational processes and procedures.

Qualifications:

• B.S. in engineering or related scientific field. Equivalent experience may be substituted.
• Three (3) years overall work experience, two (2) of which in a design engineering role.
• Must have strong computer skills and demonstrate proficiency with 2D/3D CAD systems and MS Office programs.
• Must have strong knowledge of aircraft mechanical/structural design processes, materials, fabrication methods and aerospace hardware.
• Must possess working knowledge of substantiation techniques and FAA regulatory requirements.
• Must be able to effectively utilize aircraft continued airworthiness data.
• Must be organized and an effective project manager, presenting good communication skills and a professional appearance. Preferred:
• Knowledge of aircraft interiors, composites and entertainment systems.
• Experience with Product Lifecycle Management (PLM) software.

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 41685
Job Location: Atlanta, GA
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Records Specialists - Dallas, TX

Description:
STS AeroStaff Services is hiring Aircraft Records Specialists in Dallas, Texas.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Summary:

The Aircraft Records Specialist is responsible for the data entry, audits and updates of the daily production of maintenance accomplished documentation.

Job Duties:

• Audits maintenance packages of work accomplished, log page discrepancies and deferred maintenance items
• Reviews documentation of maintenance accomplished for accuracy, proper sign-off and compliance
• Performs the data entry in the Maintenance Activity Communication History module of the maintenance computer system
• Performs the removal and installation of components in the Component Control System module of the maintenance computer system
• Reviews and Updates documentation pertaining to AD's and modification compliance in the Modification Control System module of the maintenance computer system
• Ensures all scheduled maintenance has been audited for proper sign-off and updated in the system prior to the release of the aircraft
• Audit vendor airworthiness certification and enter work accomplished into the maintenance computer system
• Maintains aircraft and engine flight hours and cycles utilization reports, master log reports, and engine oil consumption reports
• Maintains historical records in the mainframe database for components, maintenance activity and communication and modification compliance
• Responsible for the retention of all aircraft maintenance records into an imaging system and ensure the documents are maintained permanently in accordance with standards and FAA regulations
• Processes engine, APU, and gear assembly build ups and teardowns documentation from vendor and shop locations
• Produces Aircraft Records specification reports when requested from outside parties
• Monitor correction requests
• Interact with Planning, Records, Reliability, Production and Engineering departments
• Responsible for verifying the accuracy of maintenance databases through various reports
• Submits recommendations for process improvements and assists Records Analyst in training new Employees

Qualifications:

• High school diploma or equivalency required; minimum two year college is preferred
• Minimum two years’ in the aviation industry (Records, Planning, Reliability, or Production) is preferred
• Must be able to master PC software packages including Microsoft Excel/Word/Access applications
• Experience working with an imaging system software is a plus
• Experience working with the Maxi-Merlin main frame application is a plus
• Valid Driver's License Required
• Ability to learn to read technical documents, follow instructions, and understand office procedures
• Must have vision ability sufficient to view and read computer monitor on a frequent basis
• Must be able to lift 30 pounds and drive on secured airport property
• Must meet confidentiality expectations as to confidential, proprietary and sensitive Company information
• Be able to use a computer with accuracy and/or use a computer keyboard with sufficient speed to meet demands of the job
• The ability to use 10-key by touch with sufficient speed to meet the demands of the job
• Must be able to perform mathematical computations
• Must work under tight time constraints to accomplish assignments and projects
• Flexibility to perform well under pressure
• Requires the ability to effectively prioritize daily work schedule with minimum or no supervision
• Strong organizational and communication skills and an eye for detail are needed
• Understanding of aircraft maintenance language and documentation process experience is a plus
• Requires shift, weekend, holiday and occasional overtime work

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 41715
Job Location: Dallas, TX
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Systems Designers

Description:
*Must have a degree and be able to obtain security clearance
* DOORS & Agile Methodology Background
* Avionics system design engineers to help define the requirements for vehicle health management solutions for commercial and military platforms. This software will monitor and assess aircraft fault data to provide flight deck and maintenance personnel with appropriate information for assessing the health of the aircraft.

Please email resumes: mmccarthy@pdstech.com
 
Job Number: BO-MO-Avionics
Job Location: St. Louis, MO
Rate: $67.00/hour
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Business System Analyst

Description:
We are seeking for a Business System Analyst for this National company located in Bend, Oregon.

This role will leverage appropriate Business Systems Analysis tools/solutions based on the standards/best practices of our client. This position requires minimal supervision delivering outcomes, significant breadth/depth of job specific knowledge and significant level of service delivery, professionalism, and communication.

The Business Systems Analyst (BSA) and/or Technical BA is responsible for:
Performing application process definition
Technical application modeling
Requirements gathering and analysis capabilities to help identify and understand how software and hardware systems are currently fulfilling needs and/or gaps
Participation in working groups and/or as part of PMO led projects
Project
Completing the IT application and software model as it relates to the supply chain function.
Socialize model and fit/gap recommendations where application/hardware support should be handled - i.e. changes to organization support and roles/responsibilities to be successful
Aid in any transition of Supply Chain applications/hardware support into the IDS organization
Establish a Technical supply chain roadmap and strategic plan
 
Job Location: Bend, ORE
Per Diem: Possible
Overtime: Yes
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
C++ Developer

Description:
Key Responsibilities:

The successful candidate will be responsible for driving forward our 3D Interoperability, Visualization and Inspection products
• Produce high calibre Requirements, Functional, Design and Test specifications
• Architect software modules
• Program in C++ as well as code review the work of peers
• Advocating and policing quality and process

They will work within the team’s SDLC processes to create high quality systems and processes, and they will collaborate other teams to achieve the best possible results

Essential Requirements:

Qualifications:
• A degree in a numerate subject (e.g. mathematics, sciences, engineering).

Skills:
• Expertise in C++ and Visual Studio
• Expertise in object oriented design (OOD)
• Good analytical and problem solving skills.
• Excellent communication and team working skills.

Desirable Skills and Knowledge:


Software Programming & Design:
• One or more years in designing, developing and deploying cloud based
solutions using AWS
• High level skills in JavaScript, HTML5, CSS
• Knowledge of scripting language such as PERL

Industry knowledge:
• CAD / 3D geometry systems
• Solid modelling
• Computer Graphics
• Geometry

Personal Skills:
• Excellent communication – verbal and written, in English.
• Team working.
• Organisation and time management.
• An energetic and proactive approach
• Clear thinking and analytical problem solving skills
 
Job Location: St. Louis or Milford, OH, MO
Rate: $46
Overtime: No
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: 804 TECHNOLOGY
Attention: Dwayne Crecelius
Address: 5381 HIGHWAY N STE 201
City, State: COTTLEVILLE, MO 63304
Phone: 636/928-0330
Fax Phone: 636/530-3693
Website: www.804technology.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CAM Automation Developer

Description:
Essential Job Functions:

· As a CAM Automation Developer, join the global technology team for HDBS based in Houston and create CAM automation using C# and API calls from Siemens NX software.

· Participate in the development of a complete CAM automation package to support the manufacturing of drill bits.

· Support manufacturing by participating in the setup of NC machines, including developing postprocessors for those machines.



Qualifications

· Proficiency required in GRIP, TCL, C and C#. NET Programming languages.

· Thorough knowledge of Siemens NX software - Advanced level (in both CAD and CAM).

· Experience in writing software programs in C, C++, or C#. Experience using Microsoft Visual Studio and Microsoft Team Foundation Server desired.

· Knowledge and understanding of the Turning and 5 Axis CNC Programmer with UG – minimum 5 years. Must also possess strong designing (CAD) skills.

· Ability to understand and modify post processors (up to 5-axis) and have awareness of “G-codes” and “M-codes”.

· Prefer thorough knowledge of machine shop equipment, such as Lathes, milling machines, cutting tools and cutting tool geometry such as cutting angle, rake angle and clearance angles.

· Strong interpersonal skills involving ability to work effectively cross-functionally and cross-culturally sharing ideas, and views; strong written and oral communication skills necessary to lead meetings and events; ability to work independently from other developers, but with moderate direction from management.

· Strong mathematical skills (Arithmetic, geometry and trigonometry).

· Ability to identify potential manufacturing issues and propose corrective action.
 
Job Number: 001
Job Location: Houston, TX
Rate: Open
Per Diem: Yes
Overtime: Yes
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: QUEST GLOBAL SERVICES
Attention: Akshay Adya
Address: 111 FOUNDERS PLAZA STE 601
City, State: EAST HARTFORD, CT 06108
Phone: 860/726-7025
Website: www.quest-global.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CNC Programmer

Description:
Job Title: Numerical Control Programmer

Location: St. Louis, MO

Duration: Long term 24+ months

Pay Rate: $60/ hour

Job Description:

To define, plan, design and refine fixtures, data and processes necessary to facilitate and control the manufacture of products in the St. Louis facilities.
Plans, creates, verifies and revises machine control data and documentation that direct the operation for multi-axis numerically controlled machines and robots required to manufacture and inspect complex parts and tools.
Provides numerical control, machining and programming technical expertise to cross-functional engineering and manufacturing team.
Establishes technical requirements for manufacturing and producibility.
Defines and designs complex fixtures used to manufacture or inspect parts.
Plans, guides and facilitates the development and integration of new machining techniques and manufacturing methods or inspection techniques, processes and software.
Continuously improves the quality of manufacturing processes and supplier-provided work

Experience and Qualifications:

Over four (4) years of recent N/C Programming experience, using CAD/CAM systems to analyze and modify part models and produce programs required.
Aerospace manufacturing experience required.
3, 4, and 5-axis NC programming for milling parts.
Structure parts (e.g. spars, ribs, skins, bulkheads and nacelle fittings)
High speed aluminum and /or titanium machining experience.
Vericut 7.XXX simulation minimum experience.
CATIA V5 R2014 minimum experience.
Familiarity with Windows environments and office tools.
Machinist experience preferred.

Education:

Associate’s Degree in N/C Programming, Manufacturing Technology or equivalent preferred. Bachelor’s Degree in Manufacturing Technology or related field preferred.
Combination of education and experience may be considered in lieu of degree.

Physical Demands:

Typical machine shop work environment and physical expectations
 
Job Number: 382791
Job Location: St Louis, MO
Rate: $60/ hour
Per Diem: none
Overtime: yes
Duration: Long Term/ ongoing
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: CDI CORPORATION
Attention: Jason Greer
Address: 17177 PRESTON RD STE 300
City, State: DALLAS, TX 75248
Website: www.cdicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CNC Programmer IV CA (local only)

Description:
Job Title: CNC Programmer IV
Keywords:
Number of Positions: 1

Remaining Positions: 1

Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **





Required (Please screen for these three items and make sure the experience is accurately reflected on resumes):



** Siemens NX9-NX11 NC Programming experience is required **

** DMU Mori with Siemens 840D Experience ; Specifically DMU80 FD and DMU65 **

** Expertise in Lathe, Millturn, and 5 axis Mill programming of high temp alloy materials **



** Candidates above the maximum bill rate will be considered. Please make sure that they are submitted at rates commensurate with their qualificaitons **



** Phone AND In-Person interviews are required. Candidates must be able to attend an in-person interview at their own expense **

50% - The NC Programmer is responsible for writing new CNC programs, setup instructions, estimating and making changes to existing CNC programs. Will develop, write and maintain NC programs for complex aerospace components using engineering models, drawings and specifications to support a zero defects machining operations environment. Selects program routines for the most efficient machining methods for each part. Will be involved in the prove out of new technology, first article inspection, fixture design, and day to day programming using Siemens NX9-NX11 CAM.
10% - Analyzes engineering models/drawings to define the sequence of machining operations to ensure that the design intent and component quality is achieved.
5% - Make proper cutting tool selections, taking into consideration such factors as materials, speeds, type of cutters, feeds and control system imitations.
10% - Use machine simulation and optimization software to troubleshoot/validate CNC programs and ensure highly efficient and 100% defect-free FTT machining processes.
10% - Modify existing parts programs for engineering changes or program improvements.
5% - Work closely with Machinists, Quality, Engineering, Management and other team members.
5% - Develop, write and maintain type II probe and logic macros to perform on machine touch probe measuring, fixture updates, cutter offset updates, and part feature data collection.
5% - Participate in knowledge sharing and cross training activity within the NC programming group.








Skills:
Required (Please screen for these three items and make sure the experience is accurately reflected on resumes):



** Siemens NX9-NX11 NC Programming experience is required **



** DMU Mori with Siemens 840D Experience ; Specifically DMU80 FD and DMU65 **



** Expertise in Lathe, Millturn, and 5 axis Mill programming of high temp alloy materials **



Preferred Requirements:

-NX Post Builder expertise

-NX Machine tool Configurator expertise

-Vericut Machine Builder expertise

-Fanuc custom macro programming expertise

-Siemens 840D macro programming expertise

Education:
Bachelors degree or equivalant experience.

Skills:
Required
SIEMENS NC PROGRAMMING LATHE

State/Province: California
City/Town: Canoga Park

Start Date: 01/29/2018 Hours Per Week: 40.00
Est. End Date: 01/29/2019 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7332297
Job Location: Canoga Park, CA
Rate: 46/hr
Duration: 12 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Contract Administrative / Coordinator

Description:
Notes from Hiring Manager:

* This position will be supporting one of our client’s Security Solutions contracts
* Should have an administrative logistics background, preferably with defense / government / military contracts.
* Must be detail oriented with strong MS office skills, particularly Office and Excel (client currently has 2016 Excel software so must have experience with at least 2013; 2016 preferred)
* Need to have great communication skills as they will be dealing with both internal and external persons
* Strong organization skills as they’ll also be assisting with the Supply Chain Group
* Looking for the right personality fit; someone who can think / act on-the-fly & who’s not easily frustrated

Responsibilities:

> Organize and properly record archived files
> Filing/scanning hard copy files, data entry
> Research data / old files and properly organize / match
> Work closely with Supply Chain Group for deliveries, scheduling/planning of materials and other shipments as needed
> Assist with clerical tasks, i.e. shipping documents, completion sheets, etc….
> Provide additional admin support as needed

Experience:

> 5+ years of related work experience preferably with defense / government / military contracts
> Must be detail oriented and able to multi-task and prioritize
> Must be US Citizen w/ HS Diploma or equivalent; Associate / Bachelor degree in a related field is a plus
> Experience and familiarity with ITAR compliance is preferred
> Demonstrate reliability and strict confidentiality
> Excellent customer service demeanor to interact effectively with customers/vendors
> Work independently with limited supervision/consultation from superiors
> Demonstrate a working knowledge of Microsoft Office applications, especially Word & Excel (2013 or 2016)
> Understand and follow oral and written directions
> Plan and organize work to complete promptly, paying close attention to detail
> Strong attention to detail; excellent data entry and organizational skills; strong written and verbal communication skills
 
Job Number: 052_2018A
Job Location: Elkridge, MD
Rate: DOE
Per Diem: Split Possible
Overtime: Yes
Duration: 6-12+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: GLOBAL AMERICAN STAFFING
Attention: Mark A Ludwig
Address: 12 HARDING ST STE 204-205
City, State: LAKEVILLE, MA 02347
Phone: 508/230-5030
800 Phone: 800/510-8050
Fax Phone: 508/923-0005
Website: www.globalamericanstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Control Systems Programmer

Description:
Reviews, analyzes, and modifies programming systems including encoding, testing, debugging and installing to support an organization's client/server software applications. Accountable for field engineering support and supporting departments, including control systems engineering services for ride, show, and other ride related control systems. These services include: planning, organizing, and leading teams in troubleshooting; problem resolution; system operational enhancement; system reliability improvement; and documentation. Must have sufficient technical knowledge and awareness of details to be able to recognize when technical problems are developing in various disciplines, and to initiate appropriate corrective actions. Respond to mechanical and control emergencies resulting from Attraction downtimes.
 
Job Number: 384240
Job Location: SEATTLE, WA
Input Date: 11/14/2020
Firm Name: CDI CORPORATION
Attention: Jonathan Oleson
Address: 17177 PRESTON RD STE 300
City, State: DALLAS, TX 75248
Website: www.cdicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer

Description:
Job Title:

Product designer Essential Job Functions Applies and interprets engineering calculations to obtain design solutions and troubleshoot erroneous results.

Defines input requirements and develops functional specifications by utilizing basic statistical methods and reliability techniques.

• Component and system level design

• Evaluation of assembly and system interactions

• Understanding of key design parameters and ability to articulate tradeoffs for a given application

• Ability to simulate systems and sub-systems, build prototypes, devise test plans, document results and designs and specify design & test systems

• Knowledge of various experimentation and verification testing methods

• Experience with troubleshooting and analysis of field failures

• Understanding of pressure, temperature and vibration considerations for downhole environments

• Good knowledge of appropriate material selection – including, but not limited to metals, coatings, elastomers

• Static structural analysis utilizing CAE software (ANSYS)

• CAD modeling and drawing creation

• Have knowledge of ASME GD&T specification

• Understand the effects and application of tolerance stacks

• Excellent communication skills (verbal and written)

• Experience managing projects with cross-functional organizations (manufacturing, operations, product management)



Desired Skills:

• Experience with drilling processes and practices

• Experience with drilling systems (reamers, coring equipment, bottom hole assemblies, MWD/LWD systems, mud motors, etc.)

• Experience with BHA and drilling dynamics analysis



Secondary Job Functions:

At QuEST, we often challenge our team members to temporarily work outside the scope of their primary job functions to broaden their skills and help the organization.

Some of these roles and opportunities include: Execution within multiple services

Project Management: Execution and Support Technical Leadership and Technical Reviews Develop work instructions to ensure repeatability

Personnel Management Onboarding and Professional Development: collaborate and mentor QuEST Team Members Cross-functional teams Geographic re-assignments Quality Management and Continuous Improvement



Qualifications:

3+ year experience in 3D Modeling and detailing using Solidworks 2016.

BS or higher in Mechanical Engineering or equivalent

Exposure to the Update industry is highly preferred Understanding of Programming Logic required, to create macros and sub-routines

Experience with project management preferred- required to actively manage tasks Proficiency with MS Office, particularly MS Excel required
 
Job Number: 002
Job Location: Alvarado, TX
Rate: Open
Per Diem: Yes
Overtime: Yes
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: QUEST GLOBAL SERVICES
Attention: Akshay Adya
Address: 111 FOUNDERS PLAZA STE 601
City, State: EAST HARTFORD, CT 06108
Phone: 860/726-7025
Website: www.quest-global.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design and Analysis Engineer 1

Description:
Please share updated resume at ravi@iconma.com

Design and Analysis Engineer 1

Location: Oklahoma City, OK
Duration: 6 Months

Skill Code: 664-Electronic Sys Design & Analy

Description:
This is an entry level engineering position performing Avionics and associated ground Systems support and Testing. Candidate will perform AV/FC Systems Development Support. This activity will consist of performing system core & interface testing, as well as Lab Test Equipment Support & Maintenance for the C-17 Military Airlifter. Candidate will become a team member in the avionics organization working closely with software, avionics, and systems engineers. Activities will be undertaken per organization and program standards and procedures, under the guidance of subject matter expert engineers and management, but with appropriate freedom to learn and innovate.

A successful candidate will possess excellent communication skills (written and verbal) and the ability to work in a team environment within a complex organization. The selected candidate will be tasked to develop solutions to engineering technical problems; and to apply engineering, scientific, and common sense principles in the context of organizational dynamics and real world cost & schedule targets.

Education / Experience:
Required: Bachelor's degree in an engineering classification from an accredited course of study, in engineering, computer science, mathematics, physics, or chemistry.
 
Job Number: 18-02264
Job Location: Oklahoma City,, OK
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/234-6123
800 Phone: 866/914-9724
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design and Analysis Engineer 3

Description:
Seeking a Design and Analysis Engineer 3 located in Oklahoma City, OK

RESPONSIBILITIES:
This is a mid-level engineering position performing Avionics and associated ground Systems support and Testing. Candidate will perform avionics and associated Ground Systems support and testing with a focus on Flight Controls. Perform AV/FC Systems analysis, development and test. All effort is in support of the C-17 Military Airlifter. Candidate will become a team member in the avionics organization working closely with software, avionics, and systems engineers. Activities will be undertaken per organization and program standards and procedures, under the guidance of subject matter expert engineers and management, but with appropriate freedom to learn and innovate.

A successful candidate will possess excellent communication skills (written and verbal) and the ability to work in a team environment within a complex organization. The selected candidate will be tasked to develop solutions to engineering technical problems; and to apply engineering, scientific, and common sense principles in the context of organizational dynamics and real world cost & schedule targets.

EDUCATION:
Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

WORK HOURS:
Full-Time/First Shift
7 AM - 3:30 PM
 
Job Number: 168575
Job Location: Oklahoma City, OK
Rate: $62.45-$69.40
Per Diem: Yes
Overtime: Yes
Duration: 6 mths.
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: CHIPTON ROSS
Attention: Melody Mullins
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design and Analysis Engineer 3

Description:
Please share updated resume at ravi@iconma.com

Job Title: Design and Analysis Engineer 3 (18-02081)

Location: Oklahoma City, OK
Duration: 6 Months

Skill Code: 664-Electronic Sys Design & Analy

Description:
Client is seeking a engineer on the C-17 Military Airlifter Program in Oklahoma City, OK. Candidate to perform Lab Test Equipment/Systems Operations, Support & Maintenance, and Ground Support software modification and integration. Familiarity with ATLAS, test equipment, LabWindows CVI and ability to troubleshoot electronics desired.

Education / Experience:
Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.




Design and Analysis Engineer 3 / (18-02072)

Location: Oklahoma City, OK
Duration: 6 months

Description:
Perform Avionics and associated ground Systems support and Testing with focus on flight controls testing. Perform AV/FC Systems Development Support. Perform system core & interface testing. Perform Lab Test Equipment Support & Maintenance.

Education / Experience:
Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

Skill Code:
664-Electronic Sys Design & Analy



Design and Analysis Engineer 3 (18-02078)

Location: Oklahoma City, OK
Duration: 6 Months

Job Description:
Perform AV/FC and associated ground Systems depot level maintenance, development, repair and Testing. Lead and perform design, drawing development and release, fabrication and maintenance of equipment for ground support depot level troubleshooting and repair of fielded ground support end items.

Education / Experience:
Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

Skill Code:
664-Electronic Sys Design & Analy



Design and Analysis Engineer 3 (28872-1)

Location: Oklahoma City, OK
Duration: 6 months

Job Description:
Perform Lab Test Equipment/Systems Operations, Support & Maintenance. Perform Avionics and associated ground Systems development support, troubleshooting and Testing. Perform system core & interface testing. Familiarity with software development and maintenance, lab maintenance is desired.

Education / Experience:
Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

Skill Code:
664-Electronic Sys Design & Analy
 
Job Number: 18-02077
Job Location: Oklahoma City,, OK
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
EO/IR Video Correction and Enhancement Algorithms-Staff Systems Engineer

Description:
*Data driven algorithm development to optimize performance given sensing/processing constraints
*Working with interdisciplinary team consisting of systems, software, firmware, and electrical
*Working with test engineering team with EO/IR sensor characterization
*Excellent planning, management and communication skills
*Ability to provide technical direction and generate material for proposals
*Ability to contribute to corporate roadmaps including EO/IR and embedded processing technology
*Work independently and create technical direction for the overall organization

Qualifications:
*Bachelor's Degree in Aeronautical, Electrical, Electronic, Mechanical, Software, or Systems Engineering, Mathematics, or Computer Science
*10+ years functional experience required
*Must be able to obtain a security clearance
*Design and development of algorithm development, including but not limited to:
-Detailed knowledge of Matlab/Simulink tools (includes embedded coder and HDL coder)
-Detailed knowledge of IR/EO systems including generation/use of characterization data
-Detailed knowledge of optimizing algorithms for FPGAs (creation of streaming model)
-Detailed knowledge of data analytics, including collection, parsing, and processing
*Knowledge of EO/IR systems modeling and characterization is preferred
*Master's Degree preferred
*Knowledge of model based design is preferred

Benefits: Visit http://www.teamglobal.com/benefits.html for more details.
 
Job Number: 127389
Job Location: Fort Worth, TX
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: GCP Recruiter
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design Engineer

Description:
The primary design work will be in the areas of analog, digital, and power conversion circuitry used in commercial and military aerospace products.


You will interact with key colleagues and stakeholders in multiple disciplines and functions, including board design, hardware design, systems engineering, software development, program and project management, etc.


In addition you will :
• Design for safety, testability, and manufacturability
• Define Hardware architecture
• Select electrical components for rugged environments
• Schematic capture
• PCB area estimation, power dissipation, component stress
• Troubleshoot analog and digital circuits
• Perform and document root cause analysis
• Design Failure Mode Effect Analysis (DFMEA)
• Perform Circuit Worst Case Analysis
• Perform Electrical simulation
• Perform Design to cost analysis
• Support PCB design with EMC and manufacturability guidelines
• Support mechanical design, software, test engineering, and manufacturing
• Support qualification and acceptance testing
• Support lifetime testing, EMC, electrical pulses, ESD
• Sensor interface design (tachometers, accelerometers, synchros, etc.)
• Design for rugged, safety-critical environments

Role Summary/Purpose :

As Lead Engineer, Electronic Hardware Design for GE Aviation's well-established and highly successful global Avionics & Airborne Electronics business, you'll provide technical expertise to support development of embedded Avionics products, project execution and design support.

This is soup-to-nuts development of new state-of-the art aircraft components.
Qualifications/Requirements :
• BS Electronic Engineering or Electrical Engineering from an accredited university or college
• 2 years of experience designing analog and digital hardware for airborne or automotive applications
• 5 years of Engineering experience

ELIGIBILITY REQUIREMENT :
• This role is restricted to U.S. persons (i.e., U.S. citizens, permanent residents, and other protected individuals under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3)) due to access to export-controlled technology. GE will require proof of status prior to employment
Desired Characteristics :
• Understanding of analog, digital, and power theory
• Familiarity with Electronics Lab test equipment, and test methods
• Capable of developing and writing specifications in an engineering environment
• Expertise with PSPICE CAD design tools
• Familiarity with design, test and analysis tools and systems
• Development to DO-254 and DO-160 standards
• FPGA design experience
• DC to DC converters design experience
• Strong oral and written communication skills
• Strong interpersonal and leadership skills
• Ability to influence others and lead small teams
• Lead initiatives of moderate scope and impact
• Ability to coordinate several projects simultaneously
• Effective problem identification and solution skills
• Proven analytical and organizational ability
 
Job Number: 7671
Job Location: Pinellas Park, FL
Rate: Open
Per Diem: Split
Overtime: Yes
Duration: 12 months
Start Date: 2 weeks
Input Date: 11/14/2020
Firm Name: BENTLEY GLOBAL RESOURCES LLC
Attention: Johnathon Williams
Address: 3937 TAMPA RD STE 3
City, State: OLDSMAR, FL 34677-3115
Phone: 813/510-3032
Website: www.bentleygr.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Systems Design & Analysis Engineers III - OK

Description:
Active Secret Clearance, NOT REQUIRED to start.

Our Aerospace Client is currently seeking an experienced Electrical systems Designers to perform Electrical Loads Analysis and power systems modification. This
includes Airborne Surveillance Command and Control aircraft from around the world including, NATO, French, Saudi, US, UK, Japan AWACS, B-52 Bombers, C32/C40 VIP transports, , the E-4 National Airborne Operations Center, KC-767
International Tankers and VC-25 presidential transport.
This position is located in Oklahoma City, Oklahoma
Job Responsibilities will include but not be limited to:
- Develop and document electrical load analysis based upon system design.
- Provide coordination memos with impact analysis for systems design changes.
- Present results of analysis at customer design reviews (PDR, CDR)
- Publish reports detailing the aircraft electrical load and bus capability.
- Utilize existing software to complete Electrical Load Analysis
- Direct a team of engineers providing individual direction.
- Leverage existing tools and help develop a path forward for a common tool for ELA.
- Works on unusually complex technical problems and provides solutions which are highly innovative and ingenious.
- Develops advanced technical ideas and guides their development into final product
- Serves as organization spokesperson on advanced projects and programs. Acts as advisor to management and
customers on advanced technical research studies.

Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

Previous experience with aircraft power distribution and architecture desired.

ACS Group (formerly 'Comforce')
 
Job Number: EEOK
Job Location: Oklahoma City, OK
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 9+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronic Design & Analysis Engineer I & III - (OK)

Description:
This is a mid-level engineering position performing Avionics and associated ground Systems support and Testing. Candidate will perform avionics and associated Ground Systems support and testing with a focus on Flight Controls. Perform AV/FC Systems analysis, development and test. All effort is in support of the C-17 Military Airlifter. Candidate will become a team member in the avionics organization working closely with software, avionics, and systems engineers. Activities will be undertaken per organization and program standards and procedures, under the guidance of subject matter expert engineers and management, but with appropriate freedom to learn and innovate.

A successful candidate will possess excellent communication skills (written and verbal) and the ability to work in a team environment within a complex organization. The selected candidate will be tasked to develop solutions to engineering technical problems; and to apply engineering, scientific, and common sense principles in the context of organizational dynamics and real world cost & schedule targets.

Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

ACS Group (formerly 'Comforce')
 
Job Number: EEOK
Job Location: Oklahoma City, OK
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronic Design & Analysis Engineer II & III & IV - (CA)

Description:
SEVERAL OPENINGS IN THE HUNTINGTON BEACH, CA AREA.

- Developing electronic and electrical flight control system solutions
- Participating in modification projects for flight control hardware and software designs based on platform requirements
- Executing systems and software testing to verify operational and functional requirements
- Managing hardware/software suppliers' performance to ensure customer requirements are met
- Supporting resolution of product integration & field operation issues
- Researching new technologies for potential application to C-17
- Developing solutions to technical problems of safety of flight scope and impact
- Applying solid engineering, scientific, and common sense principles in the context of organizational dynamics and real world cost & schedule targets
- Integrating into teams and collaborating with multiple engineering disciplines in solving moderately complex problems concerning fielded airborne avionics and flight control (AFC) systems, involving both hardware and software.
- Participate in full lifecycle projects to develop functional and interface requirements; design hardware, software and interface specifications; test and validate to ensure system designs meet operational and functional requirements; assist in monitoring supplier performance to ensure system integration and compliance with requirements
- Work with customers and their Boeing representatives to obtain feedback for product enhancements and corrective actions.

Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

ACS Group (formerly 'Comforce')
 
Job Number: EEhb
Job Location: Huntington Beach, CA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronic Design & Analysis Engineer III - (MO)

Description:
INTERIM SECRET, NOT REQUIRED TO START.

Avionics system design engineers to help define the requirements for vehicle health management solutions for commercial and military platforms. This software will monitor and assess aircraft fault data to provide flight deck and maintenance personnel with appropriate information for assessing the health of the aircraft. There will be both on-board (semi-realtime to realtime) and off-board functionality to this software. The work will include development of throughput/memory requirements, functionality requirements, technical performance measures, risk identification and mitigation, integration activities, and test development and execution. Experience in defining avionics systems requirements in DOORS is a requirement Experience in developing integration & test plans in a large scale, complex system is required. Experience with Agile development methodology is desired. Experience with the Atlassian tool suite is desired. Experience with aircraft health management systems is desired. Experience with subsystem fault detection and reporting is desired. Experience developing systems in a geographically dispersed environment is desired.

Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

ACS Group (formerly 'Comforce')
 
Job Number: EEMO
Job Location: Berkeley, MO
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronic Systems Design & Analysis Engineer III - (OK)

Description:
Perform Lab Test Equipment/Systems Operations, Support & Maintenance. Perform Avionics and associated ground Systems development support, troubleshooting and Testing. Perform system core & interface testing. Familiarity with software development and maintenance, lab maintenance is desired.

Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

ACS Group (formerly 'Comforce')
 
Job Number: EEOK
Job Location: Oklahoma City, OK
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronic Systems Design & Analysis Engineer III - (OK)

Description:
We are seeking a engineer on the C-17 Military Airlifter Program in Oklahoma City, OK. Candidate to perform Lab Test Equipment/Systems Operations, Support & Maintenance, and Ground Support software modification and integration. Familiarity with ATLAS, test equipment, LabWindows CVI and ability to troubleshoot electronics desired.

Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

ACS Group (formerly 'Comforce')
 
Job Number: EEOK
Job Location: Oklahoma City, OK
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronics Hardware Engineer || Electrical Engineer

Description:
Please share updated resume at ravi@iconma.com


Electronics Hardware Engineer||Electrical Engineer

Location: Milwaukee, WI
Position type: W2 Contract

NOTE:LOOKING SOMEONE WITH EXTENSIVE EXPERIENCE IN DESIGNING CIRCUITS TO CONTROL DC BRUSH AND BRUSHLESS MOTORS.

Description:
Principal Duties:
- Participates in the development and/or improvement of new and existing products for design change, cost reductions, warranty improvements, and manufacturability.
- Works with minimal direction to create and develop product concepts, and oversees the development to meet time and budgetary constraints.
- Conducts engineering qualification tests on the product including coordinating with outside agencies to ensure compliance.
- Takes initiative to recommend projects, product improvements or cost reductions.
- Performs tradeoff between implementation, schedule, cost and resource constraints and recommend alternatives.
- Provides technical feedback, input and consultation to other departments in design or implementation activities.
- Utilizes CAD systems as related to job.
- Utilizes software application programs such as Microsoft Office, Mentor Graphics Expedition, etc.
- Handles multiple complex or multi-activity tasks simultaneously. Has effective time management skills so that high priority tasks are completed as planned.
- Other duties as assigned.

Requirements:
- Bachelor Degree in Electrical Engineering or a closely related discipline. Master degree preferred.
- Minimum 5 years, preferred 10 years, of experience in product design or engineering experience. Advanced skills, additional education and exceptional performance may alter this requirement.
- Able to apply fundamental engineering theories, mathematics, mechanics, and physical science concepts to the job.
- Experience with electrical schematic capture, PCB layout, 3D CAD modeling, parts database structures, BOM structures, and engineering change management.
- Preferred experience with Mentor Graphics Expedition, Mentor Graphics Valor, and Windchill/Creo.
- Preferred experience in the fields of electrical (120/230Vac), electronic, mechatronics, and electro-mechanical design.
- Preferred experience designing circuits to control DC brush and brushless motors.
- Preferred experience with EMC design techniques.
- Preferred experience designing for regulatory compliance of UL, CE, and other global standards.
- Knowledge of manufacturing processes and limitations to assure conformance of design and fabrication of product.
- Able to obtain and interpret datasheets for electrical and control components, and determine electrical and mechanical requirements.
- Able to proficiently use the tools or materials required to perform typical assigned duties.
- Demonstrated ability to work in a team environment, good written and oral communications skills, flexibility and adaptability to changing situations.
- Preferred experience interfacing with global manufacturing facilities.
- Ability to work independently, as well as direct the work of others.
- High attention to detail and solid organizational skills.
- Possess a professional appearance and positive work attitude, in accordance with work area and company policies.
 
Job Number: 18-02724
Job Location: Milwaukee,, WI
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/234-6123
800 Phone: 866/914-9724
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronics Technician - RF - HF - VHF - Microwave

Description:
Job Title: Manufacturing Electronics Technician

Location: Santa Rosa, CA 95403

Terms: Long Term Contract Employment (24 months)

Industry: Manufacturing of electronics test and measurement equipment and software. (RF / Microwave / Electronics).

Duties / Responsibilities / Experience:

Test, trouble-shoot, and build various high performance electronic products used by the telecommunication industry.
Technical support services supporting production, New Product Introduction (NPI's), older products; support parts used for the repair of customer products, help support the electrical repair of factory returned products, and occasionally will be required to help with the refurbishment of products.
Experience troubleshooting to the component level.
Solid experience and knowledge of analog and digital circuits and theory.
Specialized expertise and technical ability in Test and troubleshooting in support of the instrument products.
Providing multi-disciplinary support to NPI engineers and production to resolve a wide range of associated technical and design issues.
Working with Manufacturing and NPI to provide technical support in qualifying new designs and developing tools and fixtures.
Evaluates technical design tasks and determines actions required.
Solves complex problems requiring breadth/ depth of knowledge of technical design processes/ procedures, and many different technologies and tools.
Qualification Requirements:

Education: Certificate/AS/BS in Electronic Technology or Engineering.
Minimum 3 to 5 years related RF and Microwave test experience.
Proficient with Component level troubleshoot.
Extensive knowledge of operations and troubleshooting of test and measurement equipment.
Solid understanding of analog and digital circuits and theory.
 
Job Number: 382840
Job Location: SANTA ROSA, CA
Rate: OPEN
Per Diem: No
Overtime: Possible
Duration: 24 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: CDI CORPORATION
Attention: Kris Douglas
Address: 17177 PRESTON RD STE 300
City, State: DALLAS, TX 75248
Website: www.cdicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer

Description:
Major purpose:
• Developing embedded software (hardware layer to application layer) to meet specific system and hardware requirements
• Defining and developing custom hardware/software interfaces – Bare-Metal
• Debugging and integrating software on product hardware, including board bring-up
• Working with systems and electrical engineers to develop software requirements
• Developing and executing software unit and functional tests
• Assisting with design changes or software updates
• Collaborating with staff and other engineers to meet project milestones

Job Requirements:
• BS or MS degree in Computer/Electrical Engineering or Computer Science
• 3-7 years of experience in embedded software development
• Experience in C/C++ (with emphasis on real-time embedded)
• Experience with microcontroller (ARM, Microchip, AVR, or similar 16 and 32 bit) architectures
• Experience in embedded systems design with preemptive, multitasking real-time operating systems
• Experience with software configuration management tools, anomaly tracking tools, and peer review
• Hands-on debug skills with JTAG, simulators/emulators, logic analyzers, oscilloscopes, etc.
• Adequate knowledge of reading schematics and data sheets.
• Strong written and verbal communication skills
 
Job Number: 18-08288
Job Location: Londonderry, NH
Rate: $80-$90
Per Diem: No
Overtime: No
Duration: 6+ Month Contract
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Sebastian Hernandez
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer - Flight Management Systems

Description:
The Navigation and Guidance Software Engineer will provide technical expertise to support the development of Embedded Avionics Software, FMS, and Datalink products. In this role you will utilize your experience and expertise to solve problems, develop, and execute project objectives.

In addition you will:
• Validate system requirements and author embedded software for avionics systems and sub-systems

• Work in a multidisciplinary team, architect, design, develop, and update functionality for real-time embedded avionics software
• Identify, evaluate, and occasionally develop engineering tools and processes necessary to meet the project's engineering and business goals
• Provide timely communications on significant issues or developments, maintaining a focus on safety and reliability
• Conduct Problem (PR) investigation and resolution
• Participate in software structural coverage analysis and test for 100% coverage of airborne software
• Participate actively in software design and code reviews
• Write embedded avionics software functional test cases and procedures to verify software functional requirements to DO-178B standards
• Develop software verification strategies and test procedures to verify software functional requirements
• Execute the design, analysis, or evaluation of assigned projects using sound scientific / engineering principles and practices
 
Job Number: 90210
Job Location: Grand Rapids, MI
Rate: 65.00
Per Diem: SPLIT
Overtime: YES
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Paul Chacon
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer - Secret Clearance

Description:
***Must have Active Secret Clearance***



Major purpose:

The Aero Software Engineer is responsible for designing, developing, integrating and test of high fidelity, scalable, physics-based Aerodynamics Software models for Real-Time simulation training applications. Responsibilities also include troubleshooting and fixing existing software discrepancies in a variety of aerodynamic subsystems such as: engines, flight controls, control loading, motion, and aircraft systems.



Major functions:

" Provide aerodynamic software design, development and integration support on a variety of simulator programs for both helicopter and fixed wing platforms

" Support peer reviews for aero software solutions

" Troubleshoot pre-existing software discrepancies within the aero domain

" Support testing activity both in the lab and on the simulator to include flight test matching, qualification test guide (Client) analysis and certification testing

" Ability to work with a variety of aero subsystems and understand the interactions with other simulator subsystems

" Ability to work tasks to completion with minimal guidance



Education/Required Experience


" B/S in Aerodynamics, Physics, Mathematics or equivalent experience with an emphasis on software

" Minimum of 8 years of aerodynamic engineering technical experience

" Minimum of 8 years experience in software development with C/C++, Fortran, and/or Ada

" Experience developing in a Unix or Linux operating system environment

" Experience working with FAA Level 'D' fidelity requirements is desired

" Proficiency with Matlab SimuLink is a plus

" Systems integration experience

" Good computer skills including working knowledge of Microsoft Office

" Must exhibit strong problem-solving skills

" Strong communication skills and good team work



 
Job Number: 18-03647
Job Location: Arlington, TX
Rate: 65.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2018-08-12 00:00:00.0
Start Date: 2018-02-12 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Sebastian Hernandez
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engine/APU, ECS, Fuel Systems Engineer

Description:
Engine/APU, ECS, Fuel Systems Engineer

Location: Savannah, GA
Pay Rate: $58/hr - $63/hr
Duration: Long Term Contract
Shift: First

Unique Skills:
Required Experience in the following:
• System Certification Requirements: Cert Plan, Flight Test Plan, Flight Test Report, Qual Test Report, Lab test report, Testing requirements/Flight Clearance and or SOF Requirements, development testing
• Hardware Qualification: Plans, procedures, Reports, conformity, ATP & Outline Drawings
• Software Certification: Experience reviewing PSAC, CIA, SAS. Experience in software V&V Required Experience in the following:
• Engine Systems (FADEC)
• Environmental Control Systems
• APU systems
• Fuel systems (Distribution and Indication)

Desired Experience in the following:
• Working Knowledge ARP4754 and CFR 25
• Exposure to Part 33 certification
• Project Management Skills/Experience:
• Configuration change management
 
Job Number: 7519
Job Location: Savannah, GA
Rate: $58-$63
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer Electromechanical - 3 / active secret preferred / CREO / electronic packaging CA

Description:
1631
Engineer Electromechanical - 3 (Job Number: 18002041)

Number of Openings: 1

Location(s): United States-California-Redondo Beach


Shift: 1st Shift

Target Start Date: Mar 19, 2018

Target End Date: Mar 15, 2019

Pay Rate: $58/hr. - $60/hr.

Work Week: 9/80

Location: Redondo Beach, CA

Duration: 1 year

The responsibilities include mechanical design & analysis using computer-aided design (CAD), conducting packaging trades, tolerance and interference analyses, generating drawing packages & associated electronic data, and supporting the fabrication, assembly and test of the hardware.


Basic Qualifications:

•5 Years with Bachelors in Science; 3 Years with Masters; 0 Years with PhD.
•A Bachelor of Science degree in a STEM (Science, Technology, Engineering or Math) discipline
•Electronic packaging, CAD, or mechanical design experience in an aerospace environment
•Demonstrated technical skills with experience supporting a multi-disciplined team
•Experience working with different partners across organizations and programs
•Proficient in performing tolerance and interference analyses
•Experience in generating and releasing product detail and assembly drawings
•Experience with PTC Creo / Intralink software applications



Preferred Qualifications:

•A Master’s Degree in Mechanical or Aerospace Engineering and 4+ years of engineering experience in an aerospace environment
•Experience with electronic packaging / mechanical design for airborne & space applications
•Electronics design development and sustaining experience spanning cradle to grave
•Experience with Enovia PLM software application
•Proficiency with electrical design, electronics manufacturing processes and qualification activities
•Familiarity with research and development of advanced packaging technologies
•Active DoD Secret or Top Secret, and/or SCI clearance
 
Job Number: MB-1631
Job Location: Redondo Beach, CA
Rate: 58-60/hr
Per Diem: no
Duration: 12 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Design Checker - Level 3

Description:
Location: Lexington, KY
Rate: $25.00 - $35.00/HR
Duration: 1 year contract
Shift: 1st shift

****MUST have an Active Secret Clearance or to have had one within the last 2 years*****

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years*****
Examines engineering drawings and related documents for soundness, efficiency, and simplicity in design; completeness, clarity, and dimensional accuracy; correctness of materials and processes; conformity to design/drafting standards, design specifications, and practicability; and economy of fabrication, assembly, and installation.
- This position will support engineers in the review of design data that will comply with applicable military specifications, SAE, ANSI, ASME, and other related standards.
- This position will be responsible for reviewing drawings for formatting errors and working with the engineering team to ensure a high level of quality in the design data.
- This position will also be responsible for reviewing change documentation and its related incorporations for completeness and correctness.
- This position will help develop a set of common Design Standards that meets our Customers and Program requirements.
- This position will be expected, at times, to be involved with the drawing creation and subsequent Production review processes.

Skill/Experience/Education
Mandatory:
Must have 6+ years of experience of each of the following:
- Familiarity with SAE AS50881 and ANSI/ASME Y14.100 or related design and drafting standards - CATIA V5 experience
- Familiarity with Change Documentation process and all related requirements to this process, Microsoft office suite (Word, Excel, PowerPoint)
****MUST have an Active Secret Clearance or to have had one within the last 2 years*****

Desired:
- Teamcenter or similar PDM/PLM software tool
- Experience working in an aerospace environment with exposure to or interface with DoD customers
- AutoCAD or other 2D drafting program
 
Job Number: 8590
Job Location: Lexington, KY
Rate: $25.00 - $35.00/HR
Per Diem: Split Possible
Overtime: No
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Entry Level IT Operations Analysts - Melbourne, FL

Description:
STS AeroStaff Services is hiring Entry Level IT Operations Analysts in Melbourne, Florida.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Summary:

To provide technical support to the Flight Ops’ Business Operations team. Develop and implement automations and software integration as needed. Take part in the implementation of policies, procedures, systems and tools in order to improve company’s efficiency and streamline processes.

Job Duties:

• Learn the Flight Operations’ invoice and others processes and develop various Automations as directed to assist with accuracy and speed of Data entry for the processes
• Create Software Integration and report automation as directed for process improvements and time and cost saving
• Connect different business software for data upload/download and sync using Programming Languages and other IT tools as necessary
• Database Creation and support for management of large amount of complex interrelated sets of data
• Write and/or update Standard Operating Procedures (SOPs) for all activities assigned
• Assist with specialized financial and cost analysis (e.g., usage, volume and variance analysis) and prepare related management reports
• Support the preparation of management reports
• Participate in the implementation and operation of company’s planning and reporting software (on ad-hoc basis or as part of structured projects)
• Assist with analysis and recording of a high volume of invoices and create various related reports
• Assist with the company lean and continuous improvement processes
• Assist with the implementation of policies and procedures
• Review financial and internal controls to determine whether such policies and procedures are adequate to meet management objectives and newer challenges
• Other Ad-hoc requests

Required:

• Software / Computer Degree with Business Experience and knowledge OR Bachelor's Degree with a major in Accounting, Finance or related Business area and programming experience and knowledge
• Ability to perform well under pressure, successfully completing tasks with deadlines
• Must be able to work well with others, strong interpersonal skills
• Able to work in a fast paced team environment with on the Job training
• Excellent time management, planning skills and attention to detail
• Strong Data Analysis and Interpretation ability
• Strong MS Excel skills are required and frequently used on the Job
• Must be able to effectively create and modify linked Cells, Ranges and Sheets
• Create and modify Conditional Formatting, Tables, Pivot Tables, Formulas, Various Charts and Pivot Charts
• Knowledge and/or Experience of Programming/Scripting languages and techniques for creating data entry automation and Software Integration
• Experience of Visual Basic, AutoHotkey, SAP GUI, Guixt, Access and SQL will be preferred
• Ability to perform transactional tasks accurately, while following established processes and guidelines with minimal supervision
• Knowledge of financial and analytical business principles, practices and procedures

Desired:

• Experience of Financial or Business Operations analysis
• Strong MS PowerPoint skills
• SAP familiarity
• MS SharePoint familiarity
• Experience of purchasing, order placement and dispute resolution
• MS Visio familiarity
• Adobe Acrobat (Writer) Pro familiarity; moderate JavaScript skills are a bonus
• Familiarity with SalesForce.com
• Experience in performing general admin support activities related to aircraft programs
• Experience of assisting or participating in a Lean and/or Continuous Improvement Program

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 41696
Job Location: Melbourne, FL
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Designer 3

Description:
If interested then please share updated resume at ravi@iconma.com

Equipment & Tool Designer 3/4

Location: Everett, WA || Auburn, WA
Duration: 9 months

Job Description:
Investigates and develops complex equipment and tooling concepts and specifications to satisfy aerospace product design and build requirements. Participates in design reviews, collects design requirements, creates and revises drawings and models, researches the application of robotics, automation and new technology to support the build plan. Creates off-load packages, specifications, purchase requests and usage instructions for equipment and tooling. Checks designs for compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements. Develops and documents equipment and tooling inspection and usage instructions, preventative maintenance plans, and user training. Provides technical support for engineering changes and discrepancies by investigating problems and analyzing data to identify solutions. Maintains hardware and software configuration. Assesses and makes recommendations for disposition of equipment and tooling.

Skill Code:
66W-Tech Designer

Education / Experience:
AA degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience.
 
Job Number: 18-03763
Job Location: Everett, Auburn, WA
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/234-6123
800 Phone: 866/914-9724
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Designer III & IV (Everett, WA)

Description:
SEVERAL OPENINGS IN THE EVERETT/SEATTLE AREA.

Leads the development of highly complex equipment and tooling concepts and specifications to satisfy aerospace product design and build requirements. Leads design reviews, design requirement collection, drawing creation and revision. Researches the application of robotics, automation and new technology to support the build plan. Creates off-load packages, specifications, purchase requests and usage instructions for equipment and tooling. Checks designs for compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements. Establishes and validates spares requirements. Leads the implementation of best practices into functional process documentation to drive standard work. Oversees the development and documentation of equipment and tooling inspection and usage instructions, preventative maintenance plans, and user training. Provides technical direction to support engineering changes and discrepancy resolution. Oversees the maintenance of hardware and software configuration. Assesses and makes recommendations for disposition of equipment and tooling. CATIA V5

AA degree in related discipline and typically 6 or more years of related experience or an equivalent combination of education and experience.

ACS Group (formerly 'Comforce')
 
Job Number: ToolDesEverett
Job Location: Everett, WA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Designer Level 4

Description:
RESPONSIBILITIES:
Leads the development of highly complex equipment and tooling concepts and specifications to satisfy aerospace product design and build requirements. Leads design reviews, design requirement collection, drawing creation and revision. Researches the application of robotics, automation and new technology to support the build plan. Creates off-load packages, specifications, purchase requests and usage instructions for equipment and tooling. Checks designs for compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements. Establishes and validates spares requirements. Leads the implementation of best practices into functional process documentation to drive standard work. Oversees the development and documentation of equipment and tooling inspection and usage instructions, preventative maintenance plans, and user training. Provides technical direction to support engineering changes and discrepancy resolution. Oversees the maintenance of hardware and software configuration. Assesses and makes recommendations for disposition of equipment and tooling.

EDUCATION:
AA degree in related discipline and typically 6 or more years of related experience or an equivalent combination of education and experience.

WORK HOURS:
First Shift/7-4PM
 
Job Number: 168743
Job Location: Everett, WA
Rate: $53.50 - $59.40
Per Diem: Yes
Overtime: Yes
Duration: 6 mths.
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: CHIPTON ROSS
Attention: Melody Mullins
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Engineer 4

Description:
If interested then please share updated resume at ravi@iconma.com

Equipment & Tool Engineer 4

Location: Everett, WA
Duration: 9 months

Description:
Develops program and project requirements, develops highly complex equipment and tooling concepts and designs solutions, including alternatives for the Production System. Validates analysis of technical data, influences product engineering design and makes robotics, automation or technical recommendations to support production system integration for a aerospace products. Leads the creation and modification of equipment and tooling definition at the program level. Executes project plans, provides input to Make/Buy decisions and partners with Procurement to meet program schedule, cost and quality targets. Ensures compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements. Leads gated reviews and develops plans for production readiness, preventative maintenance and spares. Validates contractual performance milestones. Develops and implements work-arounds and maintains configuration of hardware, software and documentation. Conducts studies and make recommendation for disposition of assets.

Education / Experience:
Degree and typical experience in engineering classification: Bachelor's and 9 or more years' experience, master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctor of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

Skill Code: 66V-Analysis Engineer
 
Job Number: 18-03764
Job Location: Everett,, WA
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/234-6123
800 Phone: 866/914-9724
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Engineer 4 (Everett, WA & Mesa, AZ )

Description:
Equipment & Tool Engineer 4

Location: Everett, WA & Mesa, AZ
Duration: 9 months

Description:
Develops program and project requirements, develops highly complex equipment and tooling concepts and designs solutions, including alternatives for the Production System. Validates analysis of technical data, influences product engineering design and makes robotics, automation or technical recommendations to support production system integration for a aerospace products. Leads the creation and modification of equipment and tooling definition at the program level. Executes project plans, provides input to Make/Buy decisions and partners with Procurement to meet program schedule, cost and quality targets. Ensures compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements. Leads gated reviews and develops plans for production readiness, preventative maintenance and spares. Validates contractual performance milestones. Develops and implements work-arounds and maintains configuration of hardware, software and documentation. Conducts studies and make recommendation for disposition of assets.

Education/ Experience:
Degree and typical experience in engineering classification: Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

Skill Code:
66U-Designer Engineer

Required Skills:
Skills: Category Name Required
Areas of Expertise CATIA V5 No
Software Skills CATIA V5 No
Technical Skills CATIA V5 No

If interested then please share updated resume at ravi@iconma.com
 
Job Number: 18-00738
Job Location: Everett,, WA
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Engineer III - (Everett, WA)

Description:
SEVERAL OPENINGS IN EVERETT, WA.

Develops program and project requirements, develops highly complex equipment and tooling concepts and designs solutions, including alternatives for the Production System. Validates analysis of technical data, influences product engineering design and makes robotics, automation or technical recommendations to support production system integration for a aerospace products. Leads the creation and modification of equipment and tooling definition at the program level. Executes project plans, provides input to Make/Buy decisions and partners with Procurement to meet program schedule, cost and quality targets. Ensures compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements. Leads gated reviews and develops plans for production readiness, preventative maintenance and spares. Validates contractual performance milestones. Develops and implements work-arounds and maintains configuration of hardware, software and documentation. Conducts studies and make recommendation for disposition of assets. CATIA V5

Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

ACS Group (formerly 'Comforce')
 
Job Number: EquipToolEngEverett
Job Location: Everett, WA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Control DER

Description:
Position Purpose:
Responsible for the design, research and development of advanced new applications resulting in new product/business for the company.

Unique Skills:
• Flight Controls Software DER. Please see DER chart for additional details.
• This position will need the following delegations on FAA chart Systems and Equipment: D1, D2, D3 and D7.

Education and Experience Requirements:
• Bachelor's Degree in engineering, a related curriculum required or equivalent combination of appropriate education and experience sufficient to successfully perform the essential functions of the job.
• Fifteen (15) + year’s progressively responsible engineering exp in specific tech discipline with Bachelors. Exp credit considered for related adv degrees limited to 2 yrs Masters, 4 yrs PhD in fields applicable to this job. Requires approval of Eng PRB include bus justification.

Principle Duties and Responsibilities:
• Plans R&D programs and recommends technological application programs to meet corporate objectives
• Proactively promotes process initiatives that improve the balance of technical product, cost and schedule
• Applies cutting edge theories and technologies by exhibiting an exceptional degree of ingenuity, creativity and resourcefulness
• Champions and develops innovative principles and ideas
• Often acts independently and exercises wide latitude in determining objectives and approaches to critical assignments
• As a recognized expert in the field, provides consultative services to senior/executive leaders both within the company and the industry Perform other duties as assigned.
• Advanced degree in engineering or related curriculum preferred
• The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 24-228
Job Location: Savannah, GA
Rate: $135.00
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Control Software DER

Description:
Position Purpose:
Responsible for the design, research and development of advanced new applications resulting in new product/business for the company.

Unique Skills:
Flight Controls Software DER. Please see DER chart for additional details.

Education and Experience Requirements:
• Bachelor's Degree in engineering, a related curriculum required or equivalent combination of appropriate education and experience sufficient to successfully perform the essential functions of the job.
• Fifteen (15) + year’s progressively responsible engineering exp in specific tech discipline with Bachelors. Exp credit considered for related adv degrees limited to 2 yrs Masters, 4 yrs PhD in fields applicable to this job. Requires approval of Eng PRB include bus justification.

Principle Duties and Responsibilities:
• Plans R&D programs and recommends technological application programs to meet corporate objectives
• Proactively promotes process initiatives that improve the balance of technical product, cost and schedule
• Applies cutting edge theories and technologies by exhibiting an exceptional degree of ingenuity, creativity and resourcefulness
• Champions and develops innovative principles and ideas
• Often acts independently and exercises wide latitude in determining objectives and approaches to critical assignments
• As a recognized expert in the field, provides consultative services to senior/executive leaders both within the company and the industry Perform other duties as assigned.
• Advanced degree in engineering or related curriculum preferred
• The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 24-225
Job Location: Savannah, GA
Rate: $135.00
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
GNC Engineer

Description:
Must have secret clearance

RF/EO Modeling, Mission Planning, Common Simulation Framework (CSF), and / or Simulink and FORTRAN experience is a plus

Guidance, Navigation, and Control (GNC) engineer position. Responsibilities include, but are not limited to developing and analyzing GNC algorithms, Inertial Tracking / Target State Estimation algorithms, and Navigation algorithms using various simulations. Experience designing closed-loop control systems and missile autopilot algorithms is a big plus. Develop and test 6-DOF simulation models and simulation builds, and perform flight software verification / hardware-in-the-loop (HWIL) integration tests. Perform development and performance assessment in the context of Integrated Flight Simulation (IFS). The candidate should have a strong controls background and an understanding of Optimal State Estimation techniques using Kalman filters. Must have C/C++, and, MATLAB programming experience.
 
Job Number: 41661
Job Location: FL
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Guidance, Navigation, and Control Engineer

Description:
Guidance, Navigation, and Control Engineer

Location: Centennial, CO
Pay Rate: DOE
Duration: 1 year W2 contract
Shift: First, 9/80
**MUST be a U.S. CITIZEN; NO DUAL CITIZENSHIP**

Job Description:
- Closed-loop simulation development, initial mission modeling and targeting, producing Mission Variability Assessments (dispersed trajectory analysis, flight environments, and guidance accuracy), and parameter development for Antenna Control, Guidance, Navigation, PU (booster throttle control), Steering, and Sequencing subsystems.

Requirements:
-Bachelors degree or higher
-Minimum of 3 years of GN&C experience.
-Needs aerospace degree/orbital dynamics background and familiarity with software-in-the-loop simulations.
-Also needs computer programming skills (Ada, Linux and Perl experience preferred), a
-Strong systems engineering mindset
 
Job Number: 8641
Job Location: Centennial, CO
Rate: DOE
Per Diem: Split Possible
Overtime: Exempt
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Hardware Systems Engineer - (DOORS Required)

Description:
Hardware Systems Engineer

Aerospace

Location: Jupiter, Florida

Terms: Long Term Contract



This is a Hardware Systems role, NOT Software systems.

Without appreciable direction and exercising considerable latitude in determining technical objectives and approaches to assignments, performs in a largely independent role for the Systems Engineering organization.

Typical responsibilities include:

May plan, conduct, and provide technical Systems Engineering direction on projects or major phases of significant project assignment, coordinating the efforts of technical support staff in the performance of assigned projects.
Requires the use of advanced Systems Engineering techniques in management of requirements and risk for developing rocket propulsion systems.
Assesses the feasibility and soundness of proposed engineering evaluation tests, products or equipment when necessary data are insufficient or confirmation by testing is advisable.
Represents the organization in conferences to resolve important questions and to plan and coordinate work.
May direct, coordinate and review the work of a small staff of engineers and/or technicians; estimates personnel needs and schedules and assigns work to meet completion date. Or, as individual researcher or staff specialist may be assisted on projects by other engineers or technicians.
Develops solutions to complex problems which require the use of ingenuity and creativity.
Work is reviewed at extended intervals for desired results and achievement.
Contacts include interacting with customer personnel on technical matters often requiring coordinated activity across organizational lines.
60% - Develops hardware and software requirements for rocket propulsion systems product development. Responsible for derivation, allocation, and documentation of requirements in a requirements database. Responsible for the development and maintenance of system, subsystem, and component specifications. Coordinates requirements and related specification change management with IPT members. Defines and coordinates requirements verification plans with integrated product team members, plans and manages compliance assessment and certification.
15% - Performs functional analysis in support of requirements development effort. Supports and/or coordinates system trade studies. Coordinates selection of optimized concept baselines through benefit/cost trades in support of definition of system architecture and objectives.
15% - Coordinates project risk assessment and management and prepares and reports results on mitigation plans.
10% - Communicates results in oral presentations and written communication.
Skills: Required:

DOORS.
DOORS NG.
Jazz Team Server tool knowledge.
Systems requirements management and flowdown/decomposition for subsystems and components.
Education:

BS Engineering
Desired:

Hardware requirements development for complex systems including propellant valves/electro-mechanical actuators.
 
Job Number: 384294
Job Location: Jupiter, FL
Rate: Open
Per Diem: No
Overtime: Possible
Duration: 9 Mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: CDI CORPORATION
Attention: Kris Douglas
Address: 17177 PRESTON RD STE 300
City, State: DALLAS, TX 75248
Website: www.cdicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Hardware Systems Engineer IV

Description:
Hardware Systems Engineer IV

Location: Jupiter, FL
Pay Rate: DOE ($55/hr - $68/hr)
Duration: 6 month W2 contract
Shift: Jupiter, FL
**MUST be a U.S. CITIZEN; NO DUAL CITIZENSHIP**

Duties:
** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **
** This is a Hardware Systems role, NOT Software systems **

-Without appreciable direction and exercising considerable latitude in determining technical objectives and approaches to assignments, performs in a largely independent role for the Systems Engineering organization.
-Typical responsibilities include: May plan, conduct, and provide technical Systems Engineering direction on projects or major phases of significant project assignment, coordinating the efforts of technical support staff in the performance of assigned projects.
-Requires the use of advanced Systems Engineering techniques in management of requirements and risk for developing rocket propulsion systems.
-Assesses the feasibility and soundness of proposed engineering evaluation tests, products or -equipment when necessary data are insufficient or confirmation by testing is advisable.
-Represents the organization in conferences to resolve important questions and to plan and coordinate work.
-May direct, coordinate and review the work of a small staff of engineers and/or technicians; estimates personnel needs and schedules and assigns work to meet completion date. Or, as individual researcher or staff specialist may be assisted on projects by other engineers or technicians.
-Develops solutions to complex problems which require the use of ingenuity and creativity.
-Work is reviewed at extended intervals for desired results and achievement.
-Contacts include interacting with customer personnel on technical matters often requiring coordinated activity across organizational lines.

-60% - Develops hardware and software requirements for rocket propulsion systems product development. Responsible for derivation, allocation, and documentation of requirements in a requirements database. Responsible for the development and maintenance of system, subsystem, and component specifications. Coordinates requirements and related specification change management with IPT members. Defines and coordinates requirements verification plans with integrated product team members, plans and manages compliance assessment and certification.

-15% - Performs functional analysis in support of requirements development effort. Supports and/or coordinates system trade studies. Coordinates selection of optimized concept baselines through benefit/cost trades in support of definition of system architecture and objectives.

-15% - Coordinates project risk assessment and management and prepares and reports results on mitigation plans.

-10% - Communicates results in oral presentations and written communication.

Skills Required:
-DOORS
-DOORS NG
-Jazz Team Server tool knowledge
-Systems requirements management and flowdown/decomposition for subsystems and components
-Aerospace experience
-Software Requirements Management

Desired:
-Hardware requirements development for complex systems including propellant valves/electro-mechanical actuators

Keywords:
-DOORS
-Requirements Management
-Requirements Development

Education:
BS Engineering
 
Job Number: 8728
Job Location: Jupiter, FL
Rate: 55-68
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Help Desk Operations Level 2 (REQUIRES ACTIVE SECRET CLEARANCE)

Description:
Help Desk Operations Level 2 (REQUIRES ACTIVE SECRET CLEARANCE)

Location: Lexington, KY
Pay Rate: DOE ($30/hr - $40/hr)
Duration: 6 month W2 contract
Travel: Yes, US only, military installations
Shift: First, 5/40, exempt OT
**MUST be a U.S. CITIZEN; NO DUAL CITIZENSHIP**
**MUST have an ACTIVE DoD SECRET CLEARANCE; INTERIM CLEARANCE SUFFICIENT**

Description
-Entry to mid level career position. Ideal candidate will have experience in a customer service support role.
-Position will support logistic / supply chain / acquisition web site application users spread over the continental US as well as overseas locations.
-Candidate will work closely with software and system engineers to design, test, deploy, and troubleshoot web applications for a Department Of Defense customer supporting Special Operations Command.
-Written and oral communication skills are critical.
-This is not a remote position.
-Business takes place at 5749 Briar Hill Road in Lexington, Kentucky.
-Candidate can start with an interim clearance.
-No personal portable electronic devices (e.g. cell phones) are allowed into the building where business takes place.

Skill/Experience/Education (Mandatory):
-Tier 1 Customer Service Support (1-3 years' experience required)
-Oral and Written Communication / Good to Excellent Grammar

Desired:
-Basic knowledge of relational databases and the ability to write standard SQL statements (1-3 years' experience desired) – (Basic SQL Query Knowledge)
-CompTIA Security+ certificate (desired)
-User Story Creation
-Agile SDLC Experience
-Technical Writing
-Software Testing
-Software Training
 
Job Number: 8673
Job Location: Lexington, KY
Rate: 30-40
Per Diem: Split Possible
Overtime: Exempt
Duration: 6 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
IR/EO Staff Systems Engineer - Digital System Modeling

Description:
*Capturing results in white papers and presenting results to customers (strong technical presence)
*Working with interdisciplinary team consisting of systems, software, firmware, and electrical
*Working with test engineering team with EO/IR sensor characterization
*Ability to create and execute to digital system modeling roadmap including hardware-in-the-loop and integration with embedded processing
*Excellent planning, management and communication skills
*Ability to provide technical direction and generate material for proposals
*Ability to contribute to corporate roadmaps including EO/IR and embedded processing technology
*Analysis of Customer Documentation to create System Level Concepts of Operations (CONOPS), Specifications, and Architectural Design
*Work independently and create technical direction for the overall organization

Qualifications:
*Bachelor's Degree in Aeronautical, Electrical, Electronic, Mechanical, Software or Systems Engineering, or Computer Science
*10+ years functional experience required
*Must be able to obtain a security clearance
*Design and development of Matlab/Simulink modeling, including but not limited to:
-Detailed knowledge of Matlab/Simulink tools (advanced user with 10+ years’ experience)
-Detailed knowledge of IR/EO systems including generation/use of characterization data
-Detailed knowledge of integrating software/firmware source into Matlab/Simulink
-Detailed knowledge of integrating 3rd party tools into Matlab/Simulink
-Detailed knowledge of performance report generation using Matlab/Simulink
*Master's Degree preferred
*Knowledge of algorithms, image processing, software, and firmware is preferred
*Knowledge of model based design is preferred

Benefits: Visit http://www.teamglobal.com/benefits.html for more details.
 
Job Number: 127390
Job Location: Fort Worth, TX
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: GCP Recruiter
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial Process Development Engineer

Description:
Work Schedule

• Monday to Friday, 8-5



Scope of Position:

• Intermediate level process development engineer focused on advancing connectivity innovation.

• Responsible for technical development of new products/processes under some guidance from senior level engineers.

• Improving processes and solving problems based on fundamental understanding gained through the use of the scientific method and DOE.

• Reducing defects by eliminating root causes.

• Application of DMAIC and advanced statistical tools.

• Improving manufacturing cost, quality, uptime, yields, cycle time, and safety.

• Evaluating new raw materials, defining process parameters, and developing new processing equipment.

• Documenting experiment planning and process changes.



Day to Day Responsibilities:

• Design and develop new processes or improve existing processes at Corning facilities worldwide.

• Create operational ranges for parameters defined as a result of experimental development.

• Assist in the development of project plans and execute schedules to meet promised deliverables.

• Establish process development technical guideline.

• Work with local plant process experts and global SMEs on new processes innovation.

• Solve problems and improve processes based on fundamental understanding.

• Ensure that manufacturing requirements are properly developed and documented in conjunction with appropriate manufacturing, production, and engineering personnel.

• Provide information and technical assistance to manufacturing, engineering, and production personnel as required.

• Develop documentation for each project and work with associated plant personnel to implement it.

• Structured problem solving methods such as KT, Designed Experimentation, and Six Sigma.

• Implement Process Control and Process Discipline systems into manufacturing operations.

• Analyze process data using statistical tools (e.g. pareto, regression, time charting, analysis of variance, gauge R&R, etc.).

• Review and interpret data to make recommendations on immediate actions, long term corrective actions, follow-up experiments, etc.

• Troubleshoot equipment and processes.

• Document all new ideas for possible patent submission.



Required Skills

1. 3-5 years experienced in process development.

2. Proficient project management skills, including managing multiple projects simultaneously.

3. Advanced use of MS Office (Excel, Word, Project, PowerPoint)



Desired Skills

• Design products or manufacturing processes using CAD (Pro Engineer a PLUS)

• Problem solving – some level of experience in the use of DOE, SPC, Six Sigma and other process control/ analysis techniques.

• Capable of performing complex data analysis using MS excel (SPC), JMP, or Minitab software

• Familiar with fiber optic theory (a PLUS)

• Fluent in foreign languages: Spanish, Chinese, and Polish (a PLUS)



Education and Experience

• BS in an applicable engineering discipline.



Soft Skills

• Strong written and oral communication skills.

• Personal initiative and commitment.

• Organized with good planning and time management skills.

• Ability to build relationships within cross functional groups; team building skills, positive attitude, flexible and good work ethic

 
Job Number: 18-05399
Job Location: Fort Worth, TX
Rate: 45.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2019-02-18 00:00:00.0
Start Date: 2018-02-19 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Anthony Kees
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Instrument Project Engineer - Refinery Exp (TX)

Description:
THIS IS NOT FOR AN INTERN, THIS POSITION REQUIRES AT LEAST 10-15 YEARS OF EXPERIENCE.

Basic Function
An Instrument Project Engineer (IE) is responsible for the design and implementation of process instrumentation from initial conception through field installation. They are responsible for designs that provide the most reliable and cost-effective instrument systems. In addition, the IE provides consulting services to process designers in developing process design specifications, develops operating and training manuals for mechanical and process personnel and participates in training operating personnel.

An IE:
• Writes purchase and construction specifications and writes and performs Factory Acceptance Tests.
• Uses vendor software programs for sizing safety and control valves.
• Specifies, procures, and configures Programmable Logic Controllers (PLC) and field hardware such as transmitters, controllers, pneumatic and electronic transmission system.
• Utilizes standards and best practices from American Petroleum Institute (API) and International Society of Automation (ISA), National Fire Protection Association (NFPA) to perform the above functions.

Responsibilities.
The Instrument and Controls Engineer may be responsible for:
• Function as project engineer on instrumentation and capital projects and large maintenance projects.
• Taking lead role on Instrumentation and controls capital projects including PLCs.
• Help identify areas where instrumentation/controls can improve plant operations and profitability.
• Developing capital and expense budget requirements related to instrumentation system upgrades, PM/PdM programs, repairs, expansions, etc.
• Serving as a technical resource to properly identify new and existing equipment specifications and proper operating parameters/ranges for instrumentation equipment.
• Overseeing application and interpretation of National Electric Code and other applicable city, state, federal codes and standards (e.g. NPRA, NFPA, API, ISA).
• Interact with Engineering and Construction contractors, both on-site and off-site.
• Leverage the application of instrumentation safety standards, mechanical integrity, design and maintenance.
• Using documentation systems and processes that maintain accurate instrumentation information and drawings.
• Support criticality assessments of the plant's instrumentation equipment.
• Design and evaluate Refinery Safety Instrumented Systems (SIS). Perform Safety Integrity Level (SIL) analysis and engineering upgrades of safety instrumented systems.

Basic Required Qualifications.
• Must be legally authorized to work in the United States, at least 18 years of age and possess a valid driver’s license.
• Must possess a bachelor’s degree in Electrical Engineering, Chemical Engineering, Mechanical Engineering, or Industrial Engineering.
• Must have three or more years of instrumentation experience and three or more years of direct experience in a refinery, chemical and/or manufacturing industry.
• Demonstrated knowledge and use of SPI (InTools) database and specifications.
• Proficient in the specification, troubleshooting, maintenance and overhaul of process control values.
• Demonstrated knowledge of PLC's.
• Proficient in MS office (Word, Excel, Outlook, Projects).
• Must be willing and able to perform, comply with the following:
• Wear Nomex fire retardant clothing and personal protective equipment (such as steel-toe shoes, ear, and eye protection).
• Maintain face daily so that a respirator/face mask can seal properly (some examples include being free of facial hair and/or clean shaven), climb up to 200 feet in height and work in enclosed spaces such as tanks and silos

Preferred Qualifications:
• Industry certifications (ISA)

FOSTER DESIGN'S BENEFITS:
• Working for a 54-year old company
• Minimum 10 Paid Holidays with no waiting period
• Immediate 401K participation, 1 year 100% vesting schedule, matching employer contribution
• Free Financial Consultant
• Medical/Dental/Vision/Prescription card – BCBS
• MetLife – Long Term Disability Insurance
• Vacation Pay
• Per Diem Assignment Allowance, when applicable
• Per Diem Split, when applicable
• Paid Weekly (Direct Deposit)
 
Job Number: FD-021618TX
Job Location: Borger, TX
Rate: $BOE/HR
Per Diem: Possible
Overtime: Possible
Duration: 11 Months or linger
Start Date: 03/26/2018
Input Date: 11/14/2020
Firm Name: FOSTER DESIGN INC
Attention: Recruiter
Address: 200 W DOUGLAS AVE STE 110
City, State: WICHITA, KS 67202
Phone: 316/832-9700
800 Phone: 800/345-3394
Fax Phone: 316/832-9357
Website: www.fosterdes.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Interior Design Engineer

Description:
General Summary:
The Interior Design Engineer will perform interior design engineering for cabin & cockpit structures, components, and trim for aircraft. The individual will also on occasion support tasks associated with interior Installations.

Duties and Responsibilities:
1. Creates conceptual designs for interiors of the aircraft through 3D modeling software, drawings, and/or drafting application.
2. Develops designs for form/fit/function to meet customer and design criteria.
3. Provides designs for the fabrication process including sheet metal, extrusions and inject molding
4. Validates engineering designs per engineering core principles, design standards, processes and industry best practices.
5. Makes recommendations to engineering lead/management.
6. Researches and maintains up to date knowledge of technical data pertaining to cabin, cockpit structures, hardware, material, and finishes.
7. Ensures adherence to program schedule.
8. Performs other duties as assigned.

Education, Work Experience, Certification and/or Licensure:
1. 3+ years of engineering experience with at least three years of design engineering experience directly related to mechanical/interior design for commercial aircraft.

Knowledge, Skills and Abilities:
1. Working knowledge of conceptual design development of aircraft interiors.
2. Working knowledge of industry standard (i.e. - parts lists, bill of materials, parts and standards callout, etc).
3. In-depth knowledge of Geometric Dimensioning and Tolerancing (GD&T).
4. Familiarity with 14CFR Part 23/25.
5. Proficiency in CATIA V5 workbenches or equivalent 3D modeling tools (i.e. - Solidworks, Unigraphics, etc).
6. Proficiency in Teamcenter (or equivalent PLM tool).
7. Ability to work independently or within a team environment.
8. Ability to communicate effectively throughout all levels within an organization and present data clearly and concisely.
9. Ability to work cross functionally with Quality and Production to resolve issues on the production line.


Physical Requirements:
1. Incumbents may be routinely exposed to equipment operational noise heat-cold-dust, and/or aircraft equipment, parts, or fuel odors.
2. Incumbents may be required to stand, sit, squat, walk, bend, climb ladders, move, reach, or stretch for prolonged time periods with no restrictions, as required by job duties.
3. Work in a safe and professional manner while adhering to all regulatory requirements (FAA, OSHA, DOT, EPA, State, and Federal regulations, etc.).
4. Read, hear, speak, and see with no restrictions, as required by job duties.
5. Comprehend and adhere to management directions and/or safety instructions with no restrictions.
6. Effectively communicate in Business English language.
7. Pull, push, carry, lift, or move items up to 10 lbs. throughout the work shift without assistance, as required by job duties.
8. Pull, push, carry, lift or move materials/people/items/equipment weighing up to 50lbs or more during the work shift, with the use of Company provided “reach assistance technology” or “movement assist technology” (fork-lifts, pallet jacks, pulleys, dolly’s, robotics reach equipment, people movers etc.), as required by job duties.


The Structures Company is an AA/EOE.
 
Job Number: 144
Job Location: Greensboro, NC
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Java Software Development Lead (Secret Clearance)

Description:
Description:
We are seeking a Lead Software Engineer to join a team of world-class engineers supporting PMA-231 and E-2D ALE Systems. The ideal candidate shall be knowledgeable about the software development life cycle (SDLC) and be able to adhere to coding standards, follow team established software development processes, and use established configuration management technologies.

The successful candidate will:
• Develop software on off-board laptop system for maintenance, support, and analysis in addition to adding new capabilities and correct faults and errors in processing of E-2D platform mission data
• Conduct multidisciplinary research and collaborates with equipment designers and/or hardware engineers in the planning, design, development, and utilization of electronic data processing systems
• Determine system user needs; analyze system capabilities to resolve problems on program intent, output requirements, input data acquisition, programming techniques and controls; prepare operating instructions; design and develop compilers and assemblers, utility programs, and operating systems while ensuring software standards are met
• Represent the organization as a technical contact on contracts and projects, and interact with leadership and suppliers
• Use innovative thinking to develop technology strategies and enhanced capabilities of software products
• Use expertise to develop technical solutions to problems and clearly present technical approaches and findings

MINIMUM QUALIFICATIONS:
• Participate in the full software development life cycle
• Knowledgeable with Object oriented programming
• Experience with Java, JSP, XML, and/or JavaEE development environments (Eclipse IDE)
• Experience with Windows and Windows-based applications, knowledge of Apache Tomcat Web Development
• Strong software lifecycle management experience
• Knowledgeable with configuration management tools such as Jira or Team Foundation Server (TFS)
• Strong verbal and written communication skills
• Ability to work independently within a team environment and multi-task in a fast-paced environment with strict attention to detail
• Ability to obtain and maintain security clearance

DESIRED QUALIFICATIONS:
• Experience with project management and/or Scrum/Agile tools (MS Project, Visio, etc.)
• Industry certifications are highly desired (CISSP, Security +, CSM, PMP, etc.)
 
Job Number: 18-04383
Job Location: Lexington Park, MD
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 Month+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Cody Grimes
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Launch Control Software Development Engineer

Description:
Launch Control Software Development Engineer

Location: Centennial, CO
Pay Rate: DOE
Duration: 6-12 month W2
Schedule: 9/80, exempt OT
**MUST be a U.S. CITIZEN; NO DUAL CITIZENSHIP**


This position is for the Integrated Fluids Systems (IFS) group. IFS performs test and validation of Launch Control Software that defines critical operations during countdown and vehicle test.


Job Function

• Develop systems integration solutions related to automated launch site ground operations
• Perform simulated countdown testing in Systems Integration Lab (SIL)
• Establishes functional and technical requirements for fluids related software, and ensures proper integration with other software and hardware systems and program operational requirements
• Interface with Launch Operations, Propulsion Design, Electrical Ground Support Equipment, Flight Software and Avionics
• Synthesizes all applicable vehicle, ground, and operational requirements into software or operational solutions that acknowledge technical, schedule, and cost constraints
• Develops, documents, tests, and maintains requirements for ground software
• Develops and documents mathematical rationale for software parameters
• Responsible for subsystem and integrated system level software verification by defining comprehensive software test plans and performing software testing in the SIL
• Reviews and performs analysis of applicable SIL and launch site data to ensure proper software functionality


Preferred Qualifications

• A good understanding of fluids and thermodynamic principles, mechanical system design considerations, instrumentation usage, and other technical principles and concepts within the engineering field
• A significant breadth and depth of knowledge in the following systems: airborne pneumatic and propulsion systems, GSE commodities, airborne avionics, GC3 hardware, CCLS ground software
• Working knowledge of Test Requirement Documents (TRDs), hardware and operational limits, the Parameter Signal Measurement (PSM) database, Automated Data Monitoring System (ADMS), Microsoft Word and Microsoft Excel
• Familiar with good software testing practices to validate all nominal and off nominal logic paths, with an understanding of how software applications are structured, and a focus on the system level functionality
• Able to assimilate, master, and recall large amounts of detailed information as it applies to multiple system interfaces and interdependencies it in a variety of areas
• Detail oriented, focused on following through on all related tasks, with methodical and systematic problem solving and troubleshooting skills
• Launch site operations experience is a plus
 
Job Number: 8704
Job Location: Centennial, CO
Rate: DOE
Per Diem: Possible
Overtime: Exempt
Duration: 6-12 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Lead Checker IV - (AZ)

Description:
Lead Checker Position / Must have extensive checking experience / Must be highly skilled in CATIA & Industry Standards.

Develops program and project requirements, develops highly complex equipment and tooling concepts and designs solutions, including alternatives for the Production System. Validates analysis of technical data, influences product engineering design and makes robotics, automation or technical recommendations to support production system integration for a aerospace products. Leads the creation and modification of equipment and tooling definition at the program level. Executes project plans, provides input to Make/Buy decisions and partners with Procurement to meet program schedule, cost and quality targets. Ensures compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements. Leads gated reviews and develops plans for production readiness, preventative maintenance and spares. Validates contractual performance milestones. Develops and implements work-arounds and maintains configuration of hardware, software and documentation. Conducts studies and make recommendation for disposition of assets.

Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

ACS Group (formerly 'Comforce')
 
Job Number: CheckerAZ
Job Location: Mesa, AZ
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Liaison MRB / Product Review Engineer III (OH)

Description:
Active Secret Clearance, NOT REQUIRED to start.

Applies knowledge of Boeing design principles to assess and resolve product/process issues in the repair and manufacturing testing of electronic circuits and electrical assemblies for the Electronics program. Analyzes, conducts root cause analysis and develops dispositions for design non-conformances. Applies engineering principles to research technical, operational and quality issues that cannot be resolved by customer and designs interim and final engineering solutions. Identifies documents, analyzes reported problems and communicates deviations that could impact design intent and safety; recommends and manages resolution. Develops and implements product/process improvements. Ensures supplier and build partner compliance with Boeing standards. Develops customer correspondence for continued safe operation and maintenance of equipment.

Expected Duties
Reviewing and evaluating functional and performance test data for electrical and electronics circuits and electrical assemblies against their acceptance criteria. Troubleshoot electronics and electrical assemblies and identify defects to next subassembly. Disposition defects for appropriate repairs and rework.
Collect and evaluate data on customer findings for product/process improvement opportunities that may include recurrent product support issues.
Participates in Material Review Boards and Integrated Product Teams (IPTs). Provide Engineering support for material review activities on electronic and electronic components by performing Engineering investigation of requirements traces, generating supplier statement of work documents for vendor repair, resolving technical issues at vendors, coordinating technical activities with multifunctional teams.
Lead the technical evaluation of vendors proposed plans by reviewing vendor acceptance test procedures for compliance to requirements and review of vendor rework findings to determine if failure has been verified.

Must be capable of utilizing: schematics, software descriptions, historical data, electronic and electrical device functional descriptions, technical manuals, automated test equipment, standard lab equipment.

Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.

ACS Group (formerly 'Comforce')
 
Job Number: MRBoh
Job Location: Heath, OH
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Machine & Tool Designer (Secret Clearance)

Description:

Active Secret Clearance REQUIRED


USPRO is woman-owned and operated contract staffing agency that places talented individuals nationwide in the following industries: Aerospace & Defense, Manufacturing & Healthcare. Learn more at www.uspro.net ____________________________________________________________________


Responsibilities include but are not limited to the following: 



  • Develop tooling and machine design concepts and support Tool and Machine Design Engineers in creating 3D models and drawings in TcUA (Product lifecycle management system) 

  • Insure models and drawings meet all department standards and customer requirements. 

  • Present models and drawings in design reviews to ensure safety, quality, delivery, cost objectives and customer satisfaction with design from all team members. 

  • Manage multiple projects and customers while creating efficient designs to meet the program cost and schedule requirements. 

  • Work with internal customers to concept needed support equipment for new and existing programs. 

  • Work closely with Tool and Machine Design Engineers to create final drawings and meet design costs and schedules. 


 


Requirements: 



  • 4 year BS Design and Drafting or equivalent experience 

  • Working knowledge of GD&T. 

  • Familiar with machine design and aircraft tooling. 

  • Experience with model checking for accuracy and model integrity. 

  • Experience with creating drawings. 

  • CATIA V5, TcUA, NX or other 3D modeling software a plus. 


 


 

















Compensation



Benefits



Diversity/EEO



The mentioned pay rate range for this opportunity is the 'target' range set by our client. Although USPRO presents candidates to our clients regardless of what their compensation demands are, the higher your rate is above this range, the lower the chance is for consideration



401K Retirement Plan & Medical Insurance is available for candidates who qualify



USPRO is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees!




 


 













Partial Aerospace & Defense Client List



BAE Systems


Gulfstream Aerospace


Moog Inc.


Sikorsky Aircraft - Lockheed Martin


Orbital ATK


Rockwell Collins


Spirit AeroSystems




 
Job Number: O6820283
Job Location: Clearfield, UT
Rate: 40-50
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: NESC STAFFING
Attention: Brad McInnis
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
Phone: 603/431-9740
800 Phone: 800/562-3463
Fax Phone: 800/637-2562
Website: www.nesc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Maintainability Engineer

Description:
Position Purpose:
Responsible for participating in the planning, development, and sustainment of Aircraft Maintenance Programs and related issues regardless of complexity.

Unique Skills:
• Prior experience in development of Maintainability Predictions and analysis per MIL-HDBK-472, Human Engineering Design Guidelines per MIL-HDBK-759, Mean-Time-To-Repair (MTTR), assessing aircraft modifications for Maintainability impacts, CATIA V5 including Human Builder & Kinematics, and Reliasoft reliability & maintainability software are desired.
• Candidates with prior US military aircraft maintainer or air crew experience strongly preferred.

Education and Experience Requirements:
• Bachelor’s degree in aviation maintenance, engineering technology, or a related curriculum; or an equivalent combination of education and experience sufficient to perform the essential functions of the job. A&P license preferred.
• Six (6) years of Maintenance Programs/Maintainability experience or aircraft maintenance and operational experience.

Principal Duties and Responsibilities:
• Share responsibility for planning, developing, and sustainment of new and existing Aircraft Maintenance Programs and engineering projects of major complexity within established scope, meeting requirements of FAR 25.1529 or other applicable regulatory directives.
• Maintain a current knowledge of developments in the field of specialty and/or other related aircraft fields and provide recommendations to department management for process/procedure changes to prepare for new standards and implementation of new methodologies.
• Meet cost and schedule requirements while ensuring accuracy and consistency.
• Develop standards and guides to support Maintenance Programs activities.
• Mentor other team members in areas relative to Maintenance Programs processes and procedures.
• Engage with internal/external stakeholders to ensure department deliverables are being met or exceeded.
• Recommend innovations that improve collaboration, communication, quality, and/or effectiveness of product.
• Review, and provide feedback on written work of team members.
• Demonstrated in-depth knowledge of MSG-3 and Maintenance Review board (MRB) processes and methodology.
 
Job Number: 24-219
Job Location: Savannah, GA
Rate: $58 - $63
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer (15 plus needed)

Description:
Unique Skills:
• Catia V5, SAP and Solumina experience.

Principal Duties And Responsibilities:
• Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
• Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
• Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
• Investigate and assist in preparing justification for equipment and facility requests.
• Perform producibility studies from engineering drawings.
• Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
• Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures.
• Incorporate Lean Manufacturing Methodology into existing and future processes.
• Utilize CADAM/CATIA data and nesting software to generate flat patterns, Master Models, NC data, and ply nests to meet Engineering and Manufacturing requirements.
• With minimal supervision, lead/coordinate the implementation of projects between multiple organizations
• Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
• Support all Safety, Sustainability and Ergonomic Initiatives.
• Aid in development and maintenance of Business Continuity Plan.

Other Requirements:
• Proven knowledge of Lean and/or Six Sigma principles.
• Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
• Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, etc.
• Lean Six Sigma Greenbelt Certification or higher preferred.

Experience/Education:
• Bachelors degree in Mechanical, Manufacturing Engineering or related curriculum, or an equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Three (3) years Manufacturing Engineering, planning, or related technical experience.
 
Job Number: 24-206
Job Location: Savannah, GA
Rate: $50 - $55
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer - Aerospace and Defense

Description:
Ingenium Technologies - San Diego, CA



A Manufacturing Engineer is needed for a proven and reliable world leader in Aviation Air-to-Ground Communications, Aircraft Systems and Tactical Reconnaissance Radars, as well as advanced high-resolution Surveillance Systems. This individual will support the design, production, test, and system integration of Printed Wiring Assemblies and Line Replaceable Units for all aircraft platforms.





Additional Job Postings: http://www.ingeniumtech.com/tech_staffing/



Responsibilities will include but not be limited to:



Support the design, production, test, and system integration of Printed Wiring Assemblies and Line Replaceable Units for all aircraft platforms.
Responsible for manufacturing process development, implementation, and continuous improvement to enhance Quality / Yield, reduce Cost, and improve Productivity / Schedule. Initiate and lead lean manufacturing process improvement projects.

Specify and implement automation equipment and processes.

Identify and assist in addressing safety issues on the manufacturing floor.

Support manufacturing production planning and coordination, execution and operations process development.

Provide production support to assemblers and leads.

Document manufacturing processes and assembly work instructions.

Design shop aids and tooling to assist production.

Disposition non-conforming parts, identify root cause, and implement corrective and/or preventive action to reduce scrap and rework.

Collaborate with Design Engineering during prototype, development and first article manufacturing.

Expertise in assembly methods and processes, including surface mount technology, through hole technology, mechanical assembly, and testing.

Experience in both analog and digital technologies as well as a background with RF.



Software Requirements:

MRP systems, eg SAP or MTO/WDS. Experience with Microsoft Office Project and Visio.
Databases, e.g. Oracle and FileMaker. Knowledge of SQL.


Required Experience:

5 to 15 Years experience in aerospace manufacturing, processing and materials knowledge.
Background in Printed Wiring Assemblies and Line Replaceable Units.
Expertise in assembly methods and processes, including surface mount technology, through hole technology, mechanical assembly, and testing.
Experience in both analog and digital technologies as well as a background with RF.
Experience with development and deployment of manufacturing automation and remaining current with technology.
Experience with Electrical Schematics and Circuit Diagrams; Drawings and BOMs; Assembly Instructions; Engineering Change systems; Quality systems for non-conforming parts and corrective action.
Experience with Lean Manufacturing methodologies for waste reduction, e.g.: 5S, Standard Work, TAKT, Pull System, 5S, Value Stream Mapping, cell design, and manufacturing flow.
Experience with IPC & MIL standards, including: IPC/WHMA-A-610 and 620 , J-STD-001 – Requirements for Soldered Electrical and Electronic Assemblies, MIL-STD-1553 – Digital Time Division Command/Response Multiplex Data Bus, MIL-STD-1760 – Aircraft Electrical Interconnection System, SAE-AS39029 (MIL-C-39029)– Experience implementing capital equipment in factory environment.
Experience with process mapping and demand flow technology
Strong background in electro-mechanical assemblies.
Six Sigma Green Belt preferred.
Required Education: Bachelor's degree preferred not required.



Position: Direct Hire



Location: San Diego, CA



Employment Criteria : This position includes access or potential access to ITAR technical data. Therefore, candidates will need to qualify as a US Citizen, who does not work for a foreign company/foreign government/foreign governmental agency or organization, and is in compliance with International Traffic in Arms Regulations.



Employment Statement: Ingenium Technologies is an equal opportunity employer and does not discriminate on the basis of race, color, religion, sex, age, national origin, disability, veteran status, sexual orientation or any other classification protected by federal, state or local law. Proof of eligibility for employment will be required upon employment.

Due to the requirements of the Customer, No Visa sponsorship is available.
 
Job Number: 120164
Job Location: San Diego, CA
Rate: 80-95k/yr
Per Diem: no
Overtime: no
Duration: Direct Hire
Start Date: asap
Input Date: 11/14/2020
Firm Name: INGENIUM TECHNOLOGY
Attention: Alvin
Address: 4216 MARAY DR UNIT A1
City, State: ROCKFORD, IL 61107
Phone: 815/315-9273
Fax Phone: 815/399-8804
Website: www.ingeniumtech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer - Level 2

Description:
Location: Oldsmar, FL
Rate: $30.00 - $35.00/HR
Duration: 1+ year contract
Shift: 2nd Shift – 3:30 PM to 1: 00 AM
Overtime: Possible on weekdays and weekends

*****MUST be a U.S. Citizen*****

Description
Provide manufacturing engineering support to the build of electromechanical cable assemblies. Provide day-to-day support to manufacturing operations to ensure quality, cost and schedule goals are met; Investigate, communicate, and solve design, producibility, and work instruction related assembly issues as required. Define optimal material and product flow within the production work cell, taking into consideration the unique requirements of each customer. Generate and maintain detailed assembly work instructions including narrative, diagrams, photographs, attachments, and linked documents. Support design change management activities. Perform and communicate nonrecurring engineering activities during production startup, which includes, writing work instructions, tooling and fixture design, development of machine automation programs as required, and configuration of the manufacturing bill of materials for manufacturability. Interface with technical counterparts in other organizations both within and outside Clearwater Operations. Must be willing to work 2nd shift

Skill/Experience/Education
Mandatory:
- Minimum 3 years manufacturing engineering experience in a technical role supporting the design and manufacturing of cable assemblies.
- Must have IPC-620 knowledge.
- Strong interpersonal skills and demonstrated ability to work with coworkers and others from diverse backgrounds.
- Proven ability to effectively communicate through written and oral means, and to multitask by handling multiple assignments in parallel.
- Mechanical and electrical aptitude, and the ability to quickly learn new software applications.
- Experienced user of Microsoft office software applications including MS Word, Project, Excel, Visio, and Power Point.
- Ability to read and interpret Engineering Drawings.
- Willingness to work overtime and during off days occasionally as required to support production operations.
- Must be willing to work 330pm to 1am.

Desired:
- Bachelors degree from an accredited University in Engineering.
- Experience or training with advanced manufacturing technology and automated equipment applications, particularly as it relates to cable assembly manufacturing; understanding of lean manufacturing principles and the use of statistical tools to solve problems.
- Strong technical understanding of cable assembly producibility and process flow.
- Specific experience with SAP and Solumina manufacturing execution system. Fiber optic cable manufacturing is a plus.
 
Job Number: 8697
Job Location: Oldsmar, FL
Rate: $30.00 - $35.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1+ yr
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Savannah, GA
Rate: $50-$55
Long Term contract
1st Shift



Unique Skills:
Knowledgeable with CATIA, SAP, Solumina software programs. Aircraft experience with aircraft shop support and creating work instructions.


Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.


Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 8217
Job Location: Savannah, GA
Rate: $50.00 -$55.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer Planners - Greensboro, NC

Description:
STS AeroStaff Services offers Manufacturing Engineer Planner jobs in Greensboro, North Carolina.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Summary:

The Manufacturing Engineer - FTP is responsible for all manufacturing engineering aspects of defining, creating, and maintaining written FTP documents to include defining tooling, equipment, test equipment, and procedures for producing and testing aircraft at the client facility.

Duties and Responsibilities:

• Review and approve all Engineering drawings and models for assigned A/C areas, ensuring parts, assemblies, and/ or installations are manufacturable
• Define, review, and approve all FT requirements creating, maintaining, and writing FTP documents
• Define, review, and approve all FT tooling, equipment, and test equipment
• Manage all Design for Manufacturability Requests for assigned A/C area(s) reviewing/ creating and approving all internal and external submissions
• Review and approve all CR’s (Change Requests) to determine positive/ negative impacts to Production by coordinating with the various departments within client
• Review major Engineering and/or router changes with shop floor at the start of the respective Position and/ or at each Block Point change
• Create/ revise Master Routers for new/ revised Engineering for assigned A/C areas

Education, Work Experience, Certification, and/or Licensure:

• B.S.M.E., B.S.A.E., B.S.I.E., or B.S. Mfg. Eng./ Eng. Tech. preferred, but not required
• 10+ years’ of experience performing, defining, and testing aircraft with complex functional systems including mechanical and fly-by-wire systems
• A combination of experience and education is acceptable

Knowledge, Skills, and Abilities:

• Must have knowledge of, but not limited to:
o Mechanical/ electrical rigging and troubleshooting of flight controls, landing gear, and hydraulics
o Loading and verification of airborne software
o Installing and troubleshooting avionics systems including TCAS, Radar, AFCS, FADEC, etc.
o Ability to review 3D drawings and models for Engineering designs and specifications to ensure manufacturability and process capabilities
• Working knowledge of computer systems, programs, etc. including, but not limited to, the following:
o CATIA V5/ V6 experience is a plus.
o Experience programming robotics a plus.
o Router/ Work Instruction Creation and Maintenance in an advanced ERP/MRP system.
o SAP experience is a plus.
o Teamcenter Manufacturing/ Process Planning creating MBOM’s and BOP’s is a plus.
• Proven ability to trouble-shoot defects, manufacturing errors, and time consumption/ learning curve issues to improve shop floor performance.
• Ability to analyze a variety of engineering data to help determine how to meet company objectives
• Program/Project management experience as a Mfg. Engineer:
o Experience with Program/ Project management in a fast paced work environment having reported progress to peers, direct supervision, and upper management with experience in plant floor scheduling, creating project files, Gantt charts, process flow charts, track job progress, assign resources, etc.
o Proven capability to direct the work of other Mfg. Engineers to support the defined build sequence a must.
• Quality Engineering experience as a Mfg. Engineer:
o Proven ability to define inspection methods and criteria as well as interpret results to drive processes per Six Sigma (or equivalent) standards.
o Six Sigma certification a plus.
o Strong knowledge of AS9102 processes, procedures, and methods a must with experience writing or creating a plus.
• Purchasing experience as a Mfg. Engineer:
o Ability to perform vendor cost analysis versus internal costs to determine best location for manufacturing.
o Experience in supplier selection and management including directing/ addressing supplier concerns from a technical standpoint.
o Ability to read and understand LTA’s, P.O.’s, T’s & C’s, etc. a plus.
• Motivated self-starter able to work under minimal supervision.
• Experience in an IPT (Integrated Product Team) format is a must with experience as a formal or informal leader a plus.
• Promote and contribute to overall team environment, harmony, etc. is a must.

Physical Requirements:

• Incumbents may be routinely exposed to equipment operational noise heat-cold-dust, and/or aircraft equipment, parts, or fuel odors
• Incumbents may be required to stand, sit, squat, walk, bend, move, reach, or stretch for prolonged time periods with no restrictions, as required by job duties
• Work in a safe and professional manner while adhering to all regulatory requirements (FAA, OSHA, DOT, EPA, State, and Federal regulations, etc.)
• Read, hear, speak, and see with no restrictions, as required by job duties
• Comprehend and adhere to management directions and/or safety instructions with no restrictions
• Effectively communicate in Business English language
• Pull, push, carry, lift, or move items up to 10 lbs. throughout the work shift without assistance, as required by job duties
• Pull, push, carry, lift or move materials/people/items/equipment weighing up to 50lbs or more during the work shift, with the use of Company provided “reach assistance technology” or “movement assist technology” (fork-lifts, pallet jacks, pulleys, dolly’s, robotics reach equipment, people movers etc.), as required by job duties


Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 39239
Job Location: Greensboro, NC
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
An active DOD Secret Clearance is a plus.

Computer Aided Design software experience using PRO Engineer (PTC CREO2 or 3) and/or CATIA V.5. Candidate must be capable of creating and interpreting detail, assembly, and installation type drawings, and have knowledge of the concept of tolerance analysis and Geometric Dimensioning and Tolerancing (GD&T).
 
Job Number: 41695
Job Location: FL
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
Mechanical Design Engineer

Fort Worth, TX
1 Year Contract
Pay Rate: $48.25/Hr

Job Description:

• Report to a design lead on the 1018 program
• Perform and/or oversee aspects of engineering standard work throughout Preliminary Design, Detail Design, and Verification/Validation
• Coordination with functional leads to ensure product definition meets customer interface, functional, structural and performance requirements
• Must be fluent with detailed part and assembly definition (FTA) using Catia V5
• Ensure accuracy and adherence to Product Definition Standard Work in the communication of Design Intent through duties which includes: o Understand, apply and interpret Geometric Form Control to ASME Y14.5 & ASME 14.41 standards o Create / review parametric 3D models and other definition files to Design intent and Product Definition standard work using the Catia V5 software
• Types of hardware include products such as. o Hydraulic actuators o Oleo-Pneumatic shock struts (single and dual stage) o Landing gear assemblies o System routings (electrical and hydraulic)
• The engineer will create detail design, developmental and production mechanical documentation such as detail drawings, assembly drawings, engineering change incorporations as part of Technical Data Packages in accordance with contractual specifications and UTAS policies
• Product definition includes: o Associated parts list o Detailed part and assembly definition
• Experience with SMARTEAM PDM & MATRIX ONE for the approval and release of part definition and engineering changes (configuration management)
• Support drawing release schedule.
• Assist with driving improvements and harmonizing Acceptance Test Procedures using MS Word/MS Excel
• Drive improvements into daily activities, striving for right the first time and on time all the time (LEAN principles)
• Kinematics analysis using Catia V5
• Weight impact
• Tolerance stack-up evaluation

Basic Qualifications:

• ***BS in Mechanical or Aerospace Engineering***
• 10+ years design experience with a background in kinematics, mechanics and aeronautics.
• Proficient in Catia V5 detailed modeling (kinematics and systems routings a plus) and FTA generation, layouts and checking experience.
• Working knowledge of materials and surface treatments.
• Strong communication skills.
• US citizen, permanent resident alien or able to review all export-controlled technical information.
• Knowledgeable of hydraulic actuator/system design, forgings, layouts, mechanical system and structural design (fatigue and static).
• Proficient with GD&T (ASME Y14.5, ASME Y14.100 and Y14.41).
• Landing gear and/or hydraulic actuator design experience.
• Open minded, pro-active, quick learning ability and strong desire to learn
• Experience using SMARTeam – PDM
• Experience using MATRIX ONE – PLM
 
Job Number: 8507
Job Location: Fort Worth, TX
Rate: 48.25
Per Diem: No
Overtime: Possible
Duration: 1 Year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Brad
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
Mechanical Design Engineer

Independence, OH
1 Year Contract
$48.25-60.00/Hr

1st Shift

***W2 Contract Work Only***

*****BACHELOR'S DEGREE MECHANICAL/AEROSPACE ENGINEERING OR RELATED DISCIPLINE IS REQUIRED*****

• Perform and/or oversee aspects of engineering standard work throughout Preliminary Design, Detail Design, and Verification/Validation
• Coordination with functional leads to ensure product definition meets customer interface, functional, structural and performance requirements
• Must be fluent with detailed part and assembly definition (FTA) using Catia V5
• Ensure accuracy and adherence to Product Definition Standard Work in the communication of Design Intent through duties which includes:
o Understand, apply and interpret Geometric Form Control to ASME Y14.5 & ASME 14.41 standards
o Create / review parametric 3D models and other definition files to Design intent and Product Definition standard work using the Catia V5 software
• Types of hardware include products such as.
o Hydraulic actuators
o Oleo-Pneumatic shock struts (single and dual stage) o Landing gear assemblies
o System routings (electrical and hydraulic)
• The engineer will create detail design, developmental and production mechanical documentation such as detail drawings, assembly drawings, engineering change incorporations as part of Technical Data Packages in accordance with contractual specifications and UTAS policies
• Product definition includes: o Associated parts list o Detailed part and assembly definition
• Experience with SMARTEAM PDM & MATRIX ONE for the approval and release of part definition and engineering changes (configuration management)
• Support drawing release schedule.
• Assist with driving improvements and harmonizing Acceptance Test Procedures using MS Word/MS Excel
• Drive improvements into daily activities, striving for right the first time and on time all the time (LEAN principles)
• Kinematics analysis using Catia V5
• Weight impact, Tolerance stack-up evaluation

10+ years design experience with a background in kinematics, mechanics and aeronautics.
• Proficient in Catia V5 detailed modeling (kinematics and systems routings a plus) and FTA generation, layouts and checking experience.
• Working knowledge of materials and surface treatments.
• Strong communication skills. • US citizen, permanent resident alien or able to review all export-controlled technical information.
• Knowledgeable of hydraulic actuator/system design, forgings, layouts, mechanical system and structural design (fatigue and static).
• Proficient with GD&T (ASME Y14.5, ASME Y14.100 and Y14.41).
• Landing gear and/or hydraulic actuator design experience.
• Open minded, pro-active, quick learning ability and strong desire to learn
• Experience using SMARTeam – PDM
• Experience using MATRIX ONE – PLM
 
Job Number: 8621
Job Location: Indendence, OH
Rate: $48.25-60.00
Per Diem: No
Overtime: Possible
Duration: 1 Year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Brad
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
Mechanical Design Engineer

Fort Worth, TX
1 Year Contract
$48.25-60.00/Hr

***NO PER DIEM SPLIT***
***LANDING GEAR AND HYDRAULIC ROUTING A MUST HAVE***
***BACHELOR'S DEGREE MECHANICAL/AEROSPACE ENGINEERING OR RELATED DISCIPLINE IS REQUIRED***

• Perform and/or oversee aspects of engineering standard work throughout Preliminary Design, Detail Design, and Verification/Validation
• Coordination with functional leads to ensure product definition meets customer interface, functional, structural and performance requirements
• Must be fluent with detailed part and assembly definition (FTA) using Catia V5
• Ensure accuracy and adherence to Product Definition Standard Work in the communication of Design Intent through duties which includes:

o Understand, apply and interpret Geometric Form Control to ASME Y14.5 & ASME 14.41 standards o Create / review parametric 3D models and other definition files to Design intent and Product Definition standard work using the Catia V5 software

• Types of hardware include products such as. o Hydraulic actuators o Oleo-Pneumatic shock struts (single and dual stage)
o Landing gear assemblies o System routings (electrical and hydraulic)
• The engineer will create detail design, developmental and production mechanical documentation such as detail drawings, assembly drawings, engineering change incorporations as part of Technical Data Packages in accordance with contractual specifications and UTAS policies
• Product definition includes:

o Associated parts list
o Detailed part and assembly definition

• Experience with SMARTEAM PDM & MATRIX ONE for the approval and release of part definition and engineering changes (configuration management)
• Support drawing release schedule.
• Assist with driving improvements and harmonizing Acceptance Test Procedures using MS Word/MS Excel
• Drive improvements into daily activities, striving for right the first time and on time all the time (LEAN principles)
• Kinematics analysis using Catia V5
• Weight impact
• Tolerance stack-up evaluation REQ REFRESH

Additional Information:
10+ years design experience with a background in kinematics, mechanics and aeronautics.
• Proficient in Catia V5 detailed modeling (kinematics and systems routings a plus) and FTA generation, layouts and checking experience.
• Working knowledge of materials and surface treatments.
• Strong communication skills.
• US citizen, permanent resident alien or able to review all export-controlled technical information.
• Knowledgeable of hydraulic actuator/system design, forgings, layouts, mechanical system and structural design (fatigue and static).
• Proficient with GD&T (ASME Y14.5, ASME Y14.100 and Y14.41).
• Landing gear and/or hydraulic actuator design experience.
• Open minded, pro-active, quick learning ability and strong desire to learn
• Experience using SMARTeam – PDM • Experience using MATRIX ONE – PLM
 
Job Number: 8651
Job Location: Fort Worth, TX
Rate: 48.25-60.00
Per Diem: No
Overtime: Possible
Duration: 1 Year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Brad
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer

Description:
Provides technical contribution within an area of expertise as a member of a multidisciplinary team of engineers in the Research and Development division. Leads requirement, analysis, detailed design and verification activities for a section of a complete product. Collaborates with other team members on the overall design of the final product, under the guidance of the project leader.

Responsibilities:
o Completes activities with robust performance through a plan or program o Applies technical competencies in somewhat difficult situations o Identifies technical problems and provides innovative and creative solutions o Shares technical knowledge with others in the team o Generates alternatives and takes reasonable risks while solving technical problems o Generates detailed, high quality technical documentation to capture and communicate designs o Seeks knowledge of the business, market, industry and competitive environment o Completes assigned tasks on time with minimal supervision o Uses existing tools and best practices to report and track product and process metrics o Informs others proactively about developments or issues that affect their work, and their ability to meet commitments o Uses collaborative communication style to negotiate win-win outcomes o Debate constructively and accepts ideas from others o Tends to be seen as original and value-added in brainstorming sessions o Generates alternative solutions to problems or processes o This role does not have supervisory responsibility

Requirements:
o 4+ years of engineering experience, or comparable experience o Strong organizational and communication skills o Proficient problem solving skills o Strong interpersonal skills with the ability to work collaboratively with others in a team environment o Working knowledge of Microsoft Office and Engineering software o Proficient in 3D modeling utilizing CAD software (Solid Edge or SolidWorks) o Experience with updating/creating engineering drawings o Experience in the medical device industry is preferred o Experience with project management is preferred o Thrives on change and adapts to leader initiated changes o 2+ years working in cross functional teams consisting of discipline specific engineers, or comparable experience

Education:
o BS Degree (preferably in a technical discipline)
 
Job Number: 169201
Job Location: Acton, MA
Rate: Up to 51/hr
Per Diem: N/A
Overtime: Not specified
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: CHIPTON ROSS
Attention: Terry
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mfg Equipment Engineer

Description:
- Supports the evaluation of program and project requirements, develops moderately complex equipment concepts and designs solutions for the Production System.
- Ensure compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements.
- Validates contractual performance milestones, maintains configuration control, conducts project and in-depth technical reviews, prepares plans for productions readiness, preventative maintenance, and spares.
- Conducts equipment training for Production and Maintenance personnel. Develops and implements moderately complex work-arounds and maintains configuration of hardware, software and documentation.
- Supports in-production equipment and troubleshoots issues working with equipment services to perform root cause corrective action resulting in preventative measures to minimize downtime.

Work location: Everett, WA

REQUIRED EXPERIENCE:
Must have at least 5 years of experience working with manufacturing or equipment systems.
Excellent aptitude to understand the technical details and their effect on the overall system is required.
Familiarity with PLC programming, Siemens and/or FANUC, CNC logic and/or experience programming equipment machine controls is required.

EDUCATION:
Accredited Bachelor's and 5 or more years' experience, Master's degree with 3 or more years' experience or PhD degree with experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.
 
Job Number: 169176
Job Location: WA
Rate: DOE
Per Diem: N/A
Overtime: Not specified
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: CHIPTON ROSS
Attention: Terry
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mid-Level Technical Writer

Description:
Mid-Level Technical Writer
Chula Vista, CA
6+ month contract


Our client is looking for a technical writer with 3-5 years of experience, specifically in the aerospace industry. The ideal candidate will have experience with aerospace technical manuals including but not limited to illustrated parts catalogues, SRMs, and service bulletins.


Qualifications:
•Technical writing
•Technical illustrating
•Analytical thinking
•Great verbal and written communication skills
•Strong command of English language.
•Familiarity with simplified Technical English
•Ability to read and understand 2D traditional drawings.
•Ability to understand 3D solid models and data sets.
•Experience with maintenance manuals, repair manuals , structural repair manuals
•Experience with aircraft or automotive technical manuals
•Attention to detail
•Quality oriented mindset
•Self Starter
•Self Motivated
•Keen willingness to learn by digging for answers but also by asking questions.

Education:
•4 year College degree preferred: English majors, Business degrees, science degree.
•2 year engineering associate degrees equally preferred.

Software Tools Preferred Experience:
•Isodraw
•Arbortext
•CORENA
•MS Word
•MS Excel
•Framemaker
•3DVIA
•CATIA (general familiarity)
•ENOVIA (general familiarity)
 
Job Number: 53024
Job Location: Chula Vista, CA
Rate: 35
Per Diem: Possible
Overtime: Possible
Duration: 6+ months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
N/C Programmer - (WA)

Description:
Provides numerical control, machining and programming technical experience. Establishes technical requirements for manufacturing and producibility. Plans, creates, verifies and revises Machine Control Data (MCD), geometry and documentation that directs the operations for a complete spectrum of numerically controlled equipment required to manufacture and inspect parts, tools and assemblies for departmental work. Plans and guides the development and integration of new machining techniques and manufacturing methods, processes, software and equipment. Works under general direction. NC Programmer with the following skills:
1. 1+ year experience using MetrologXG version software to program Coordinate Measurement Machine (CMM)
2. Preferred: Experience programming dual armed CMM using Metrolog software
3. Skilled in knowledge and interpretation of Geometric Dimension and Tolerancing (GDT)
4. 2+ years working with CATIA (or other Model Based Definition (MBD) software to access released engineering models and interrogate them for GDT and calculated measurements

AA degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience. 1+ year experience using MetrologXG version software to program Coordinate Measurement Machine (CMM). Preferred: Experience programming dual armed CMM using Metrolog software.

ACS Group (formerly 'Comforce')
 
Job Number: NCpuyallup
Job Location: Puyallup, WA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
N/C Programmer IV - (WA)

Description:
Provides expertise in numerical control, machining, programming and Design For Manufacturing and Assembly (DFMA) in support of new and ongoing projects. Establishes technical requirements for manufacturing and producibility. Plans and guides the development and integration of machining techniques, manufacturing methods, processes, software and equipment to support the design, manufacture and inspection of parts and assemblies. Identifies equipment and approaches, coordinates and assigns work and trains/mentors others. Works under minimal direction.

- Must be a competent journeyman for post-cure (trim/drill)
- Must be very proficient with CATIA V5
- Composites experience is preferred, but not required
- 2nd shift work may be required

AA degree in related discipline and typically 6 or more years of related experience or an equivalent combination of education and experience.

- Must be a competent journeyman for post-cure (trim/drill)
- Must be very proficient with CATIA V5
- Composites experience is preferred, but not required
- 2nd shift work may be required

ACS Group (formerly 'Comforce')
 
Job Number: NCIVEverett
Job Location: Everett, WA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6-12+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
NC Programmer (Active Secret Clearance Required)

Description:
Job Type: W2 - Contract

Job Duration: 1 Year with possible extension

Program: Air Force - Long Range Strike Bomber Program (LRS-B) - B-21 Raider

Work Authorization: Active Secret Clearance issued by the Department of Defense is REQUIRED and the last investigation must have been completed within the past 6 years to be eligible for the Special Access Clearance for this program (SAP)

Hourly Rate: Dependent on Experience, Negotiable

Per Diem: Available for eligible applicants

Bonus: 1 week's pay - 20% paid after 1st two weeks, remaining 80% paid out at the end of the project or 6 months, whichever comes first

Holiday Pay: 6 Paid Holidays - (New Year’s Day, Memorial Day, Independence Day, Labor Day, Thanksgiving Day, Christmas Day)


Manager Notes:
Manager would like contractor to start anytime between 2/16/18 and 3/30/2018. May be able to start prior to Program Clearance. More than likely will target start date 6 weeks after offer acceptance.
REQUIRED ACTIVE DAY ONE DOD SECRET CLEARANCE WITH RECENT INVESTIGATION (WITHIN THE LAST 6 YEARS)

Description:
Provides numerical control, machining, and programming technical expertise to cross-functional engineering and manufacturing teams. Establishes technical requirements for manufacturing and producibility.
Plans, creates, verifies, and revises machine control data and documentation that directs the operations for numerically controlled machines and robots required to manufacture and inspect parts, tools and assemblies.
Plans and guides the development and integration of new machining techniques and manufacturing methods, processes, and software.
Apply knowledge of engineering data, geometric dimensioning and tolerancing, and machine control languages in order to plan, create and revise machine-control data and associated inspection plans.
Ability to create and revise measuring machine programs and/or computer generated solid models, statistical process-control graphic aids, in-process inspection graphic aids, and key characteristics media.
Ability to create and/or validate machine-control data, inspection point coordinate data and documentation

Requirements:
REQUIRED ACTIVE DAY ONE DOD SECRET CLEARANCE WITH RECENT INVESTIGATION (WITHIN THE LAST 6 YEARS)
Bachelor's and 6 to 9 years' related work experience, a Master's degree and 4 to 7 years' related work experience or an equivalent combination of education and experience.
Required: Trim and Drill Experience
 
Job Number: S579046
Job Location: Wichita, KS
Rate: Open
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: NESC STAFFING
Attention: Brad McInnis
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
Phone: 603/431-9740
800 Phone: 800/562-3463
Fax Phone: 800/637-2562
Website: www.nesc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
NC Programmer (KS)

Description:
Provides numerical control, machining, and programming technical expertise to cross-functional engineering and manufacturing teams. Establishes technical requirements for manufacturing and producibility.

Plans, creates, verifies, and revises machine control data and documentation that directs the operations for numerically controlled machines and robots required to manufacture and inspect parts, tools and assemblies.

Plans and guides the development and integration of new machining techniques and manufacturing methods, processes, and software. Apply knowledge of engineering data, geometric dimensioning and tolerancing, and machine control languages in order to plan, create and revise machine-control data and associated inspection plans.

Ability to create and revise measuring machine programs and/or computer generated solid models, statistical process-control graphic aids, in-process inspection graphic aids, and key characteristics media.

Ability to create and/or validate machine-control data, inspection point coordinate data and documentation.

Requirements: Level 3 NC Programmer

1st Shift
Yes, OT as required and approved
Open/Direct offer potential (Contract - 6 month duration)

Local Talent - No Per Diem
Conduct phone interview and/or onsite interviews for solid candidates

Preferred skills/knowledge: Catia V5, knowledge of FiberSim, Composite Work Bench (CPD)
General understanding: Composite Manufacturing, Composite Materials characteristics, nesting software, flat pattern creation and laser projection systems.

FOSTER DESIGN'S BENEFITS:
• Working for a 54-year old company
• Minimum 6 Paid Holidays
• Blue Cross Blue Shield – Group Medical Insurance Plan
• MetLife – Long Term Disability Insurance
• Immediate 401K participation, 1 year 100% vesting schedule, matching employer contribution
• Vacation Pay
• Paid Weekly (Direct Deposit)
 
Job Number: FD-596459KS
Job Location: Wichita, KS
Rate: $50-51/HR
Per Diem: No - Local Candidates Only
Overtime: Yes
Duration: 6 months or longer
Start Date: 03/23/2018
Input Date: 11/14/2020
Firm Name: FOSTER DESIGN INC
Attention: Recruiter
Address: 200 W DOUGLAS AVE STE 110
City, State: WICHITA, KS 67202
Phone: 316/832-9700
800 Phone: 800/345-3394
Fax Phone: 316/832-9357
Website: www.fosterdes.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Numerical Control Programmer

Description:
Numerical Control Programmer

Location: Everett, WA
Duration: 6-7 months

Job Description:
Provides expertise in numerical control, machining, programming and Design For Manufacturing and Assembly (DFMA) in support of new and ongoing projects. Establishes technical requirements for manufacturing and producibility. Plans and guides the development and integration of machining techniques, manufacturing methods, processes, software and equipment to support the design, manufacture and inspection of parts and assemblies. Identifies equipment and approaches, coordinates and assigns work and trains/mentors others. Works under minimal direction.

- Must be a competent journeyman for post-cure (trim/drill)
- Must be very proficient with CATIA V5
- Composites experience is preferred, but not required

Education / Experience:
AA degree in related discipline and typically 6 or more years of related experience or an equivalent combination of education and experience.

Skill Code: 67J-Composites
 
Job Number: 18-03767
Job Location: Everett, WA
Duration: 6-7 Months
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Robin
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Numerical Control Programmer 4

Description:
If interested then please share updated resume at ravi@iconma.com

Numerical Control Programmer 4

Location: Everett, WA
Duration: 6-7 months

Job Description:
Provides expertise in numerical control, machining, programming and Design For Manufacturing and Assembly (DFMA) in support of new and ongoing projects. Establishes technical requirements for manufacturing and producibility. Plans and guides the development and integration of machining techniques, manufacturing methods, processes, software and equipment to support the design, manufacture and inspection of parts and assemblies. Identifies equipment and approaches, coordinates and assigns work and trains/mentors others. Works under minimal direction.

- Must be a competent journeyman for post-cure (trim/drill)
- Must be very proficient with CATIA V5
- Composites experience is preferred, but not required

Education / Experience:
AA degree in related discipline and typically 6 or more years of related experience or an equivalent combination of education and experience.

Skill Code: 67J-Composites
 
Job Number: 18-03767
Job Location: Everett,, WA
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/234-6123
800 Phone: 866/914-9724
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
PCB Designer-Anaheim, CA

Description:
*Maintains and defines library symbols and footprints per electrical engineering guidelines.
*Prepares detailed layouts of the printed circuit board and establishes all electrical functionality (current carrying, isolation requirements, stack-up, etc.).
*Prepares all necessary artwork /electronic data required for the complete fabrication of the printed circuit board.
*Generates complete assembly drawings and prepares parts list IAW customer requirements to permit parts procurement and assembly.
*Interfaces with PCB manufacturers to resolve any problems related to design.
*Interfaces with mechanical and electrical engineering to establish physical and electrical parameters to meet packaging requirements.
*Reviews electronic schematic data for initial appraisal of proposed design and estimates hours to completion.
*Responsible for adequacy and accuracy of all support documentation and proposed changes to PC boards.
*Prepares mechanical layouts as required to establish design concepts related to PC board layouts, fabrication, and assembly documentation.
*Resolves technical issues related to PCB design and assists design group with solutions.
*Manage all aspects of PCB Design(s) from start to finish utilizing internal or external support resources.
*Reports status of work in process as required by supervisor.

Requirements:
*IPC Certified.
*High school graduate or equivalent (G.E.D.) plus specialized technical training.
*Minimum 10+ years general experience directly related to PCB/PWA design.
*Expert using Cadence software: OrCAD Capture CIS, OrCAD PCB Editor and Allegro PCB Designer are a must.
*Expert with the knowledge and application of Mil-Specifications and contracting.
*Expert with the knowledge and application of IPC Standards.
*Excellent written and verbal communications skills are required.
*Must manage multiple projects simultaneously.
*Expert using PCB design software tools.
*PCB Supervision experience desired

Benefits: Visit http://www.teamglobal.com/benefits.html for more details.
 
Job Number: 127296
Job Location: Anaheim, CA
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: GCP Recruiter
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Principal Software Engineer - Active Secret Clearance / C/C++/ IMS / test / architecture / Green Hills Integrity / Agile Scrum or Waterfall CA

Description:
Principal Software Engineer - Clearance (8006788) - Raytheon
Secret Clearance

El Segundo, CA
75-85/hr DOE


Raytheon Secure Information Systems is seeking a Senior SW Engineer with C/C++ development skills needed to support multiple programs.

Role and Responsibilities include the following areas:
• Execute to program requirements. Ensure that cost and schedule commitments are being met to ensure on time delivery of the end product deliverables
• Debug, troubleshoot, issue investigation, find root cause and provide corrective action determination to address integration issues
• Interface directly with Raytheon management team and customers in meetings and reviews
• Expand and influence program developments by working closely with the program managers and other engineers to process direction for the program
• Provide weekly reporting of key programmatic milestones in accordance with the program plan, while insuring risk mitigation throughout the program

Required Experience, Knowledge and/or Skills:
• 8 years software development experience
• Proven experience performing as a Senior SW Engineer for software development teams
• Proven experience in using Green Hills Integrity
• Proven experience spanning software architecture, design and system integration with experience developing embedded software utilizing C and C++
• Proven experience in leading teams using Waterfall and/or Agile Scrum methodology
• Proven experience in writing software test plan and test procedures
• Ability to support engineering team members on various programs
• Ability to multi-task, to support multiple customers, and to work within specific schedule and cost constraints
• Strong organizational skills and ability to motivate and lead a team
• Possess and demonstrate excellent interpersonal, presentation and verbal/written communication skills
• Excellent time management skills
• Active DOD Secret Clearance and be able to obtain Top Secret Clearance
• U.S. Citizenship is required
• Ability to access to US only data systems

Desired Experience, Knowledge, and/or Skills:
• Certified EVMS
• Experience working with IMS (Integrated Master Schedule)
• Experience with Green Hills Integrity
• Experience with KIV-7M product
• Experience with Raytheon’s Development Process
• Experience in Waterfall and Agile/Scrum, Continuous Integration Environments
• Experience with requirements management using DOORS
• Experience with configuration management using MKS and Git
• Software or Systems Engineering Integration expertise

Required Education Requirement: B.S. Computer Science, Computer Engineering, Software Engineering, Electrical Engineering or other Engineering discipline

Desired Education Requirement: M.S. in Computer Science, Computer Engineering, or Electrical Engineering

This position requires a U.S. person or the ability to obtain an Export Authorization from the appropriate government agency for non-U.S. persons U.S. Citizenship status is required as this position needs an active U.S. Security Clearance as of day one of employment
 
Job Number: MB-8006788
Job Location: El Segundo, CA
Rate: 75-85/hr
Duration: 3-12 months
Start Date: contract to hire
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Principal Test Engineer - Active Secret Clearance / TCP/IP UDP Labview CA

Description:
Principal Test Engineer - Clearance (8006624) - Raytheon - El Segundo CA
Secret Clearance

3-6 Month CTH

The Secure Information Systems organization requires a Systems Integration and Test (I&T) Engineer to expend the existing team of engineers due to increase in demand for our services. The successful candidate will be responsible for the technical leadership, of I&T activities for assigned program(s).

Required Skills:
• Minimum 8 years of combined experience in the field of hardware/software development and Integration/Testing of complex systems
• Minimum of 2 years of experience in technical leadership, cost, and schedule management associated with integration and testing activities on complex programs
• Write highly complex test procedures and protocols to assess product reliability and evaluate the ability of products to meet performance standards and specifications
• Previous experience with real time embedded systems development and debugging
• Previous experience with systems requirements verification and validation process
• Develop complex test simulations to evaluate how products react under different conditions and analyze product failure to assess the integrity and reliability of product performance. Debugs complex test hardware and software
• Write test scripts such as python and LabView on complex test stations
• Understand networking protocols such as TCP/IP, UDP, ARP, and ICMP
• Prior experience in the technological spaces the work requires
• Active DoD Secret Clearance required
• U.S. Citizenship is a requirement

Desired Skills:
• Experience with CMMI and EVMS processes

Required Education:
Bachelors in Computer Science, Computer Engineering, Electrical Engineering, or equivalent, advanced degree desirable
 
Job Number: MB-8006624
Job Location: El Segundo, CA
Rate: 75-85/hr
Duration: 3-6 months
Start Date: contract to hire
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Product Design Engineer - Agricultural (KS)

Description:
This Client uses Creo 4 and Windchill for their CAD package, so that experience would be helpful, but any 3D modeling experience could work.

We need to fill 3 different spots:

1st position: focused on structures and analysis, FEA using pro-mechanica or similar software.

Summary
Designs, develops, improves, and tests agricultural products/equipment and provides engineering support for all aspects of assigned product line to ensure functionality, quality, cost, and schedule.

Essential Duties and Responsibilities-include the following. Other duties may be assigned that require other qualifications, physical demands, and/or work environment.

• Follows all Great Plains policies and OSHA safety regulations and wears prescribed safety and protective equipment.
• Assists with the development of the product design, manufacturing, and functionality.
• Identifies any problems with the implementation or available resources that may affect the schedule or budget and communicates such problems accordingly.
• Analyzes the risks of a new design or process and communicates results to the engineering manager.
• Provides support to manufacturing to ensure product is fabricated and assembled based on the intended functionality of the design.
• Develops and maintains procedures and processes that support core machine technologies.
• Interfaces with others in the organization and customers to jointly determine customer needs and solutions.
• Designs products and systems to interface machines, hardware, and software.
• Supervises preparation of product layout and detailed drawings and schematics.
• Implements the product design within the schedule and budget parameters.
• Supervises manufacturing or building of prototype product or system.
• Evaluate field testing and recommend design modifications to eliminate machine or system malfunctions.
• Plans and develops experimental test programs.
• Analyzes test data and reports to determine if design meets functional and performance specifications.
• Confers with research and other engineering personnel and prepares design modifications as required.
• Evaluates engineering test results for possible application to development of systems or other uses.
• Recommends measures to improve production methods, equipment performance, and quality of product to engineering manager.
• Recommends changes in working conditions and use of equipment to increase efficiency of shop, department, or work crew to engineering manager.

Supervisory Responsibilities
Supervisory Position: No

Qualifications- To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the principle knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Education and/or Experience
Level 6: Bachelor's degree (B. A.) from four-year college or university; or one to two years related experience and/or training; or equivalent combination of education and experience.

Language Skills
Level 4: Ability to analyze journals, technical procedures, or regulations. Write reports, correspondence, and procedure manuals. Effectively present information and respond to questions from groups of managers, customers, and the general public.

Mathematical Skills
Level 5: Mathematical concepts such as exponents, logarithms, quadratic equations, permutations, frequency distribution, test reliability and validity, and analysis of variance, correlation techniques, sampling theory, and factor analysis.

Reasoning Ability
Level 5: Define problems, collect data, establish facts, and draw valid conclusions. Interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.

Computer Skills
Level 2: Word processing, Internet, Email, Spreadsheets, Software Concepts, Hardware, Presentations, Graphics, Multimedia

Certificates, Licenses, Registrations
N/A

Other Skills and Abilities
N/A

Physical Demands- The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Physical Capacity Level
Level 4: Exerting 50 to 100 pounds of force occasionally, and/or 25 to 50 pounds of force frequently, and/or 10 to 20 pounds of force constantly.

Work Environment- The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Physical Capacity Level
Level 4: Exerting 50 to 100 pounds of force occasionally, and/or 25 to 50 pounds of force frequently, and/or 10 to 20 pounds of force constantly.

Work Environment- The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
 
Job Number: FD-020918KS
Job Location: Asseria, KS
Rate: $BOE/HR
Per Diem: No - Local Candidates Only
Overtime: Possible
Duration: 3-6 Months or Longer
Start Date: 03/19/2018
Input Date: 11/14/2020
Firm Name: FOSTER DESIGN INC
Attention: Recruiter
Address: 200 W DOUGLAS AVE STE 110
City, State: WICHITA, KS 67202
Phone: 316/832-9700
800 Phone: 800/345-3394
Fax Phone: 316/832-9357
Website: www.fosterdes.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Engineer

Description:
Job Description
Manages high complexity projects in multidisciplinary research and collaboration with equipment designers and/or hardware engineers in the design, development, and utilization of life support and thermal control systems hardware & software.

Additional Job Details:
Project Engineer with a background in Aerospace or Mechanical, with 5 years minimum of experience in Space, Aerospace or Defense. Must have experience leading IPD Teams..

Must have experience with SAP and understanding or processing hardware in concert with SAP.

The Project Engineer will work per the direction of the Program Engineering Manager or designees to assist in team execution to plans. Skills and working knowledge of Project Management Body of Knowledge required. Facilitate and lead IPD Team with members from all functions.
* Planning, execution, coordination and communication of team activities and commitments
* Coordinate and status all IPD Team activities including requirements generation, development, design (including program planned reviews), procurement, fabrication and test.
* Work with IPD to create hardware development plans, coordinate hardware build effort in both the engineering labs and production labs.
* Ensure targeted goals (schedule and cost) is communicated to the team members * Identify, assess and manage the teams risks
* Hold/chair/lead weekly team meetings (or at intervals determined by the Program Engineering Manager (PEM) or Cost Account Manager (CAM)) to ensure holistic team effort within authorized scope. Ensure actions are document and driven to closure commitments.
* Perform Estimates to Complete (ETC) updating them progressively to ensure the team meets budgets and avoids scope growth and overruns.
* Meet design and design-to-cost requirements.
* Assist in administering Standard Work for the IPD Team including input of evidence of closure and status for all functions.

Individuals are required to be energetic and lead team.
Project Engineers shall work to company Standard Work and Procedures.

Notifying the PEM immediately of any potential scope or ETC growth before the work is executed.

Assist in defining preliminary parts lists and coordinate decision making on long lead part procurements.

Assist Control Account Managers with EVMS planning, performance, schedule and tracking.

Must be comfortable using MS Project scheduling tools and comfortable with discussing performance to budget and creating cost and schedule recovery options and plans.

Assist in creating program directives that define Earned Value Plans. Status plans and recommend corrective action to the Program Engineering Manager and/or Program Manager Work with operations to fabricate, assemble and test development and qualification and flight hardware.

Coordinate, track and support development and flight hardware build and test.

Initiate in scope engineering changes working with all functions to implement approved changes.

This will include marking drawings, copying prints, creating PDFs to support electronic EC processes. Document activities and programs worked with time spent on various activities.

This information will be submitted weekly and summed monthly by person with the monthly invoice.

Other Notes: Some limited program travel may be required. Overtime up to 12 hrs/week may be authorized
 
Job Number: CT41020
Job Location: Windsor Locks, CT
Rate: 65.00
Per Diem: Possible
Overtime: Possible
Duration: 12 months
Input Date: 11/14/2020
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Bill Carriveau
Address: 7310 RITCHIE HWY STE 400
City, State: GLEN BURNIE, MD 21061-3092
800 Phone: 866/277-3343
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Engineer

Description:
Project Engineer

Location: Windsor Locks, CT
Pay Rate: $68/hr
Duration: 12 month W2 contract
Shift: First, 8:00am-5:00pm, OT
Travel: Up to one trip per quarter
**MUST be a U.S. CITIZEN; NO DUAL CITIZENSHIP**

Description/Comment:
Manages high complexity projects in multidisciplinary research and collaboration with equipment designers and/or hardware engineers in the design, development, and utilization of life support and thermal control systems hardware & software.

Requirements:
-Bachelors or higher required
-Project Engineer with a background in Aerospace or Mechanical, with 5 years minimum of experience in Space, Aerospace or Defense required
-Must have experience leading IPD Teams..
-Must have experience with SAP and understanding or processing hardware in concert with SAP.
-The Project Engineer will work per the direction of the Program Engineering Manager or designees to assist in team execution to plans.
-Skills and working knowledge of Project Management Body of Knowledge required.
-Must be comfortable using MS Project scheduling tools and comfortable with discussing performance to budget and creating cost and schedule recovery options and plans.
-EVMS experience required

Additional Job Details:
-Facilitate and lead IPD Team with members from all functions.
• Planning, execution, coordination and communication of team activities and commitments
• Coordinate and status all IPD Team activities including requirements generation, development, design (including program planned reviews), procurement, fabrication and test.
• Work with IPD to create hardware development plans, coordinate hardware build effort in both the engineering labs and production labs.
• Ensure targeted goals (schedule and cost) is communicated to the team members
• Identify, assess and manage the team’s risks
• Hold/chair/lead weekly team meetings (or at intervals determined by the Program Engineering Manager (PEM) or Cost Account Manager (CAM)) to ensure holistic team effort within authorized scope. Ensure actions are document and driven to closure commitments.
• Perform Estimates to Complete (ETC) updating them progressively to ensure the team meets budgets and avoids scope growth and overruns.
• Meet design and design-to-cost requirements.
• Assist in administering Standard Work for the IPD Team including input of evidence of closure and status for all functions. Individuals are required to be energetic and lead team.

-Project Engineers shall work to Company Space Systems Standard Work and Procedures. Notifying the PEM immediately of any potential scope or ETC growth before the work is executed. Assist in defining preliminary parts lists and coordinate decision making on long lead part procurements.
-Assist Control Account Managers with EVMS planning, performance, schedule and tracking.
-Must be comfortable using MS Project scheduling tools and comfortable with discussing performance to budget and creating cost and schedule recovery options and plans.
-Assist in creating program directives that define Earned Value Plans.
-Status plans and recommend corrective action to the Program Engineering Manager and/or Program Manager Work with operations to fabricate, assemble and test development and qualification and flight hardware.
-Coordinate, track and support development and flight hardware build and test. Initiate in scope engineering changes working with all functions to implement approved changes. This will include marking drawings, copying prints, creating PDF’s to support Company electronic EC processes. Document activities and programs worked with time spent on various activities. This information will be submitted weekly and summed monthly by person with the monthly invoice. Some limited program travel may be required.
-Overtime up to 12 hrs/week may be authorized
 
Job Number: 8665
Job Location: Windsor Locks, CT
Rate: 68
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Small Project Engineer - Refinery Exp (TX)

Description:
Small Projects - Project Engineer working under Supervision of a Project Manager

11 Months or longer

Responsibilities are:
• Direct the engineering contractor assigned to the project.
• Lead organization and execution of design reviews of engineering documents and models.
• Coordinate and reviews vendor documents.
• Interface with the Business Unit to obtain input into engineering.
• Assist in preparation of the Scope of Work for documents.
• Track and manage engineering progress.
• Engage Maintenance and Operations in both the FEL and execution phases.
• Facilitate constructability input into design.
• Participate in schedule and cost reviews for assigned work areas.
• Ensure specifications and internal standards are followed in design.
• Ensure Quality is integrated into the design documents.
• Support construction through review and responses to Requests For Information (RFI).
• Project MOC development and participate in system punch-listing, completion activities, and PSSRs.


Basic Requirements:
Required Skills and Competencies are:
• Bachelor’s Degree in Engineering.
• Basic understanding of the FEL project process and interactions required to execute a project.
• 3+ year’s work experience in an industrial process facility.
• Fundamental knowledge of processes and technical standards.
• Knowledgeable of industry codes & standards applicable to refineries such as API and NFPA.
• Software: AutoCAD, MS Office, MS Project
• Ability to specify appropriate equipment and material as well as evaluate alternatives.
• Understanding of the estimating process and developing budgets within a WBS.
• Experience in working with various Engineering disciplines.
• Good understanding of Safety and Environmental policies and processes.
• Interactive skills necessary to coordinate a team of technical professionals.
• Ability to effectively communicate with a diverse group of professionals.
• Fundamental understanding of Quality requirements and the role of Quality in the project.
• Ability to lead safety in the field and participates in field safety meetings and job safety analysis reviews

Preferred Skills and Competencies are:
• Familiar with SAP, Primavera, Icarus
• Experience with directing engineering contractors.
• Experience in the Operating and or Maintenance departments.
• Good communication and negotiation skills.
• Competent in written communications and presentations.
• Field experience in construction related activities.

FOSTER DESIGN'S BENEFITS:
• Working for a 54-year old company
• Minimum 10 Paid Holidays with no waiting period
• Immediate 401K participation, 1 year 100% vesting schedule, matching employer contribution
• Free Financial Consultant
• Medical/Dental/Vision/Prescription card – BCBS
• MetLife – Long Term Disability Insurance
• Vacation Pay
• Per Diem Assignment Allowance, when applicable
• Per Diem Split, when applicable
• Paid Weekly (Direct Deposit)
 
Job Number: FD-020318TX
Job Location: Borger, TX
Rate: $BOE/HR
Per Diem: Possible
Overtime: Possible
Duration: 11 Months or longer
Start Date: 04/02/2018
Input Date: 11/14/2020
Firm Name: FOSTER DESIGN INC
Attention: Recruiter
Address: 200 W DOUGLAS AVE STE 110
City, State: WICHITA, KS 67202
Phone: 316/832-9700
800 Phone: 800/345-3394
Fax Phone: 316/832-9357
Website: www.fosterdes.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Propulsion Analysis Engineer (Centaur V)

Description:
Propulsion Analysis Engineer (Centaur V)

Location: Denver, CO
Pay Rate: DOE
Duration: 1 year W2 contract
Shift: not specified, exempt OT
**MUST be a U.S. CITIZEN**
Job Description
Performs fluids analysis at both the detailed component level and at the systems level. Fluids analyses are performed to define fluid states and conditions during system operations to verify adherence to requirements, and develops and verifies flight software parameters to control vehicle fluid systems. Develops specialized analytical tools as required to perform these functions. Develops procedures and plans for thermodynamic test programs when existing analytical capabilities are insufficient. Resolves issues related to thermodynamics that arise due to operational use in the field.

Basic Requirements
Bachelors Degree in Mechanical, Chemical, Aerospace or associated field of Engineering
10 years demonstrated ability to perform system-level thermodynamic and fluid mechanic analyses.
Capability to interpret system-level requirements, perform analysis to verify that those requirements are met, and document the verification results.
Ability to build analysis models and tools based on program needs.
NOTE: Relocation is not available

Preferred Qualifications
Candidate must have the ability to quickly understand and become proficient with various analysis tools and associated computer programs.
Experience with multiple software tools is desirable including ability to use Applied Flow Technology (AFT) suite of products, Matlab, SINDA/FLUINT, and Flow3D.
Demonstrated proficiency applying analysis results to hardware solutions is desirable
Ability to support test activities, including requirements definition, test planning, test, and test reporting is preferred
Experience with aerospace, and specifically space system, work is desirable including knowledge of cryogenic propulsion systems.
Risk management experience, including any human spaceflight experience, is desirable Works well in team environments and with minimum supervision
 
Job Number: 8436
Job Location: Denver, CO
Rate: DOE
Per Diem: Split Possible
Overtime: Exempt
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Propulsion System Design Engineer

Description:
Location: Pueblo, CO or Centennial, CO (preferably Pueblo, CO)
Rate: DOE
POP: 3-6 Month Contract
Overtime: Exempt

****MUST be a U.S. Citizen****

Job Description:
- This engineering function provides engineering design, systems integration, subcontract management, product technical support and anomaly resolution for the Propulsion fluids systems (cryogenic, non-cryogenic, hydraulics and pneumatics).

- Develops system and component designs and requirements to satisfy overall propulsion systems requirements.

- The position requires mechanical design capability as well as understanding dynamic, structural and fluids analysis concepts.

- Must have the capability to perform system integration and perform system level trade studies to optimize designs for manufacturing, producibility and performance.

- Generates engineering drawings as well as assembly and testing requirements.

- Provides direct support to the suppliers, the factory and the launch site to ensure production schedules are met, resolve anomalies and streamline operations to improve efficiency.

- When anomalies occur, provides causal analysis that leads to effective resolution and corrective actions that prevent recurrence.

- Reviews the as-built product (hardware and associated software) and product test data to certify that the final product configuration and performance meets requirements and is ready for test and/or flight.

- Develops design improvements that reduce cost and risk and/or improve vehicle performance.
 
Job Number: 8633
Job Location: Pueblo, CO
Rate: DOE
Per Diem: Split Possible
Overtime: Exempt
Duration: 3 - 6 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
QA Certification Specialist II

Description:
QA Certification Specialist II

Location: Savannah, GA
Pay Rate: $50/hr
Duration: Long Term Contract
Shift: First, Flexible Schedule

Unique Skills:
-Working knowledge of FAA regulations and Aircraft Certification processes in a Type Certificate program.
-Detail oriented and able to evaluate data for inconsistencies within tables, reports, technical documentation and other records required to support conformity process.
-Flexibility to work varied hours or weekends as necessary to support aircraft testing schedule.
-Prepares reports, creates test tracking using data from various company systems.
-Experience working with SAP, Solumina, SmarTeam and MS Excel desired.
-Demonstrated experience with data validations, data integrity and regulatory reporting desired

Education and Experience Requirements:
Bachelors degree in Engineering, aviation sciences, quality systems or related field; or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Two years related technical experience of continually increasing responsibility.

Position Purpose:
In a team oriented environment, performs all tasks in area of responsibility in a timely and efficient manner to support aircraft certification activities performed by FAA Principle Inspectors or Company ODA IARs. Ensures the article and all associated data supports and presented for certification meets requirements in accordance with the approved Quality Assurance System and the ODA (ODA-511131-CE) Operations Manual.

Principal Duties and Responsibilities/Essential Functions:
1. Coordinates article & aircraft certification activities to program schedule and milestones.
2. Manipulates and maintains large data sets related to configuration, article traceability and conformity of aircraft to determine status and compare to schedule and objectives.
3. Prepares and/or reviews data packages prior to submission in accordance with ODA/FAA requirements.
4. Performs data evaluation, interrogation and correlation of data between electronic systems.
5. Identifies abnormal data trends or changes, works with internal and external organizations to facilitate resolution.
6. Interprets engineering configuration data relative to manufacturing planning and deviations.
7. Monitors completion of certification tasks to ensure completion to program requirements and schedules.
8. Participates in team process improvement team projects both internal and external to quality.

Additional Functions:
1. Actively engaged and completes process improvement projects related to achieving improved quality or efficiency within their area of responsibility.
2. Actively supports corporate initiative in resource sustainability and business continuity.
3. Promotes, encourages and supports continuous improvement culture.
4. Performs other duties as assigned.

Other Requirements:
1. An Airframe and Powerplant (A&P) license is not required but may be used in combination with four (4) years of related quality experience (in addition to the experience requirements below) to offset the Bachelors degree.
2. ASQ certification (CQE) and/or experience as a FAA recognized airworthiness designee highly preferred.
3. Current/prior authorizations as an FAA IAR/DMIR/ODAR or DAR is preferred.
4. A&P license preferred.
5. Understands and is able to apply and communicate to others: blueprints/specifications, Federal Aviation Regulations, Quality Control System Requirements.
6. Computer literate-capable of working within the various software applications utilized throughout the corporation.
 
Job Number: 7910
Job Location: Savannah, GA
Rate: 50.00
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Engineer II

Description:
Location: Savannah, GA
Rate: $55.00/HR
Duration: Long Term contract

****MUST be a U.S. Citizen or Permanent Resident****

Unique Skills:
- Catia V5 Exp.

Education and Experience Requirements:
Bachelor’s degree in a related curriculum or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.4 years related technical exp in a manufacturing environment or repair and overhaul working with quality management systems with continually increasing responsibility. 3 years exp specific to the appropriate Quality department work to be performed.

Position Purpose:
Working under general supervision, in a team oriented environment, perform all tasks in area of responsibility in a timely and efficient manner to support the inspection/quality system ensuring all aspects of the delivered/finished article is manufactured in accordance with approved quality system requirements and is certified as compliant to type design requirements or compliant with in service limitations for Repair Station activities.

Principal Duties and Responsibilities:
Essential Functions: 1. Manage the compliance of the quality activities of suppliers or Company facilities through the application of system, product and process audits to the requirements of the FAA approved data. 2. Certify a supplier or assess a Company facility quality system, personnel, processes and equipment as required to the applicable quality standards. 3. Perform surveillance, source inspections, and first article inspections at supplier facilities, foreign or domestic and/or monitor the inspection system performance throughout all Company Operations, Materials and Repair Stations. 4. Coordinate quality assurance program plans, monitor and modify audit schedules, evaluate acceptance test programs, and quality engineering requirements of Company suppliers or facilities and review to ensure program effectiveness and integrity. 5. Witness and validate acceptance, qualification, interchangeability, configuration and compatibility tests. 6. Provide Company liaison support regarding supplier or facility performance to established requirements. 7. Coordinate documentation support for FAA Compliance.

Additional Functions: 1. Conduct product, system or process failure investigations, and provide technical assistance in resolution of quality problems. 2. Verify required corrective action implementation for timeliness and effectiveness. 3. Perform trend analysis of audit results to identify quality system deficiencies. 4. Work with other departments as needed to meet quality compliance of parts and processes. 5. Perform other duties as assigned.

Other Requirements: 1. Previous Quality experience relative/complying with Regulatory Standards. 2. Understands and is able to apply and communicate to others: blueprints/specifications; Federal Aviation Regulations; Quality Control System Requirements; knowledge of manufacturing/fabrication techniques and processes 3. Computer literate; capable of working within the various software applications utilized throughout the corporation. 4. ASQ Certification as Quality Engineer or Quality Auditor preferred. 5. A&P license preferred.
 
Job Number: 8499
Job Location: Savannah, GA
Rate: $55.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
R&D

Description:
Seeking degree Engineer with Bachelor's degree in Chemistry, Polymer Sciences and/or Materials Science as well as 5+ years of hands-on lab experience. Expertise in polymer chemistry, including epoxies, acrylates, polyimides, polyurethanes, and elastomers for use in engineering applications in the semiconductor, packaging electronics assembly, medical and optical markets. Extensive knowledge of analytical test methods/ equipment standard to the adhesives industry (i.e. DSC, TGA, DMA, TMA, thermal conductivity, Viscometer). Must be focused on applying theory to real life applications with hands on formulating approach. Should also have familiarity with statistical analysis software and Design of Experiments as well as strong computer skills. Synthesis and epoxy formulating experience are a plus



Responsibilities include carrying out intricate sample preparation techniques and creatively develop and carry out new, application specific test methods. Design and carry out thorough experimental plans with sufficient repeatability and reproducibility as well as source and evaluate new raw materials. Will work with Quality Control, Production and Process Engineering to troubleshoot existing formulations.


 
Job Number: 18-08146
Job Location: Billerica, MA
Rate: 85000.0USD/Year
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2018-02-27 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Kevin Spillane
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
RF/Radar Validation Engineer

Description:
RF/Radar Validation Engineer

Location: Palo Alto, California

Terms: Long Term Contract Employment

Top 3 Daily Responsibilities:

Simulate RF antenna performance in the context of prototype designs to drive development.
Design validation equipment to test RF performance.
Evaluate performance of prototypes (comparing to simulations and design goals).

Overall Responsibilities:

Ability to work self-sufficient in projects.
Work cross functionally between mechanical and engineer team.
Required Skills:

BS in Electrical Engineering, Mechanical Engineering or Physics 3 years in RF/Radar.

Experience in Ansys.
HFSS Software Experience with Python or Matlab.
Nice to Have Skills/Not Required:

3 years’ experience.
Embedded C, driver development experience a plus.
Algo design experience.
Experience designing Radar systems: chirps, dsp (signal processing), hardware, etc.
Circuit design experience Antenna design experience.
CAD Design experience (Solidworks, NX, or similar).
 
Job Number: 383874
Job Location: Palo Alto, CA
Rate: 90/ hour
Per Diem: No
Overtime: Yes
Duration: 2+ years
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: CDI CORPORATION
Attention: Jason Greer
Address: 17177 PRESTON RD STE 300
City, State: DALLAS, TX 75248
Website: www.cdicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
SW/HW Quality Assurance Engineer (Secret Clearance)

Description:
***Must have ACTIVE SECRET Clearance***

Develop, administer, operate, manage and maintain a SW Quality Assurance system in Clifton, NJ

Job Description:
• Take the lead and ownership of QA processes and procedures and ensure conformance to established company, contractual, and regulatory standards
• Assure that all aspects of the Solaris family of programs' SW and HW Quality Assurance, Quality Control, and proficiency testing practices are sound and within established Quality Assurance guidelines
• Conduct audits and proficiency testing; recommend implementation of preventive measures and corrective action to ensure non-recurrence of deficiencies
• Perform development and execution of Software Quality methods and processes
• Responsible for performing tests, test methods, and test procedures to ensure continuous improvement to Software Quality Assurance standards
• Implements and defines testing methodology and standards to improve results
• Creates and maintains documentation of test results to assist in debugging and modification of software
• Analyzes test results to ensure existing functionality and recommends corrective action
• Consults with senior testers and development engineers to help resolve issues
• Ongoing work towards improving the test process is also expected
• Communicate effectively, both written and oral
 
Job Number: 18-07269
Job Location: Clifton, NJ
Rate: 60-75
Per Diem: Split
Overtime: Possible
Duration: 6 Month+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Cody Grimes
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Advanced Systems Engineer-TS/SCI Security Clearance

Description:
We are seeking for an Senior Advanced Systems Engineer for a well known company in Scottsdale, AZ. The position provides an opportunity to develop the cutting-edge technology that supports some of our nation's fundamental defense services.

RESPONSIBILITIES:
Senior Advanced Systems Engineer's analyze, design, develop and test systems to ensure the integration of software, hardware, reliability, maintainability, safety and other requirements in the total engineering effort.
formulating operational concepts; performing mission, functional, cost-benefit and risk analysis; selecting systems architecture; and preparing specifications for operating systems to ensure designs meet applicable security specifications.
Document security on both new and fielded information systems or provide accreditation/certification evaluation and test support to ensure all technical security features are considered and functioning properly.
Exercise creative thinking and ideation to advance our business performance
Deliver innovative, flexible, integrated solutions to meet customers changing business needs
Support and engage in programs, projects and practices behind the culture and strategy, and comply with all policies and procedures
Follow industry and department trends and developments to ensure services are consistent with, and/or superior to, industry best practices
PREFERRED DEGREE TYPES AND EXPERIENCE:
Electrical Engineering, Systems Engineering, Computer Engineering
Experience in SIGINT and Space Payloads.
TS/SCI security clearance
 
Job Location: Scottsdale, AZ
Overtime: Yes
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Electrical Engineer (Secret Clearance)

Description:
ROLE AND RESPONSIBILITIES
Provide electrical engineering support to Research, Development, Test and Evaluation (RDT&E) programs for military aircraft/weapon systems, including planning, directing, and/or participating in aircraft and laboratory testing. Prepares procurement specification inputs, interface drawings, installation design packages, and calibration procedures to accommodate unique test requirements. Oversees systems modifications, installation, integration, and checkout functions. Performs test planning, data collection, and test data analysis. Functions entail providing support for electrical power quality testing and evaluation, including voltage and frequency transients/modulation, voltage distortion, and power interruption on various aircraft, shipboard, ground vehicle, and vendor prototype components and equipment. Functions involve applying engineering principles to modify and upgrade laboratory electrical and instrumentation systems in support of power and propulsion RDT&E programs. Projects will interface test articles with programmable power supplies and data acquisition equipment to conduct power quality tests, followed by analysis of test article responses for compliance with MIL-SPECS/MIL-STDs. In particular, candidate must have experience with Interface Standards for input power to military and aircraft contained in MIL-STD-704, military vehicles contained in MIL-STD-1275, and FAA RTCA DO-160. That experience must also include interpreting guidance for test procedures specified in MIL-HDBK-704 parts 1 through 8. Position also requires knowledge of test planning, data collection, data analysis, test report writing, and presentation of results. Further requirements include specialized knowledge and experience in the design, installation, operation, calibration, maintenance and repair of power quality test facilities, associated equipment, and their control systems. Duties may include performing other tasks for propulsion and power as directed. Candidate must be able to obtain/retain a Secret level DoD security clearance, and may be required to perform other tasks on an as-needed basis. Position is located in Patuxent River, MD.



REQUIREMENTS
Education:
Bachelor's Degree in Electrical Engineering (EE) from ABET accredited university required with a minimum of 8 years' experience supporting RDT&E to include 6 years performing functional aspects as described in the roles and responsibilities. Master's Degree in Electrical or other Engineering related discipline a plus.

Experience:
Experience working with research, development and testing with respect to requirements and characteristics of propulsion and power equipment performance.
Experience must include conducting tests to generate extreme power conditions meeting specification for standardized test regimes then conducting performance tests of electronic and electrically-powered equipment after exposure to test conditions.
Applying test conditions to include extremes with respect to voltage, frequency, modulation, distortion, and other characteristics.
Performing tests post exposure to extreme conditions to verify operation remains within specification and the equipment continues to function reliably in-service.
Experience with MIL-STD-704, MIL-STD-1275, and FAA RTCA DO-160 required.
Must have demonstrated experience directing, monitoring, and/or participating in the installation, configuration, calibration, and operation of engine test systems, environmental chambers, associated instrumentation, and/or data acquisition systems used for testing propulsion and electrical power systems.
The candidate should be capable of managing programs including writing proposals, developing program plans, and providing briefing material.

Knowledge, Skills and Abilities:
The candidate should be capable of managing programs including writing proposals, developing program plans, and providing briefing material.
Functions involve applying engineering principles to modify and upgrade laboratory electrical and instrumentation systems in support of power and propulsion RDT&E programs.
Applying analysis and test methods demonstrating equipment compliance to power characteristics.
Ability to develop test plans, design test equipment, establish protocols and procedures specific to individual test articles following guidance provide in DoD, FAA, and other documents.
Knowledge in applying programmable power sources with appropriate software and firmware needed to generate waveforms specified by test standards.
Knowledge of MIL-STD-704 and the eight parts of MIL-HDBK-704 for aircraft systems. Knowledge of MIL-STD-1275 for Military Vehicles.

Equipment and Machines:
Ability to operate office equipment such as personal computer, printer, copy machine, telephone, fax machine and other equipment including desk supplies and other work related tools as required.
Ability to operate power test systems to include programmable AC/DC power sources, power analyzer, test management and control systems, laboratory measuring, environmental chambers and other equipment required to provide test conditions, manage test sequences, and perform measurements of test parameters.
Ability to perform or facilitate calibration and repair of laboratory testing and measurement systems.

PREFERRED SKILLS
Prior DoD acquisition work experience is preferred. Familiarity with NAVAIR Propulsion and Power Laboratories and related competencies also preferred.

ADDITIONAL NOTES
Applicant selected will be subject to a government security investigation and must meet eligibility requirements for access to classified information.
 
Job Number: 18-07393
Job Location: Patuxent River, MD
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 Month+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Cody Grimes
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Software Architect-TS/SCI Security Clearance

Description:
We are seeking for an Sr Software Architect to support business development activities through analysis of customer and market requirements and comparison against product lines along with other vendor products/capabilities. Recommend the development of new capabilities in support of market and customer needs.

Responsibilities:
Perform software requirements analysis, system integration activities, lead research, designs, develop and tests software and tools, to include development of new work products or enhancing existing applications, systems or embedded products.
Support SIGINT program pursuits and execution.
Assessment of the system level functional and performance requirements and the definition of software system implementation strategies
Working closely with the RF/DSP engineering and capture teams to perform trade studies pertaining to the development of the control, status, varied analytic application infrastructure and execution, along with operator visualization functionality.
The software functionality will entail architectures and concepts that facilitate the real-time operation of the system as well as the open architectural model that allows for the seamless integration of third party/COTS applications.
Development of buildup, integration and system level test approaches and plans.
Evaluate Customer requirements as they apply to the system level capabilities to include preparation and delivery of customer briefings and capability demonstrations.
Agile experience preferred. Experience in embedded real-time software applications associated with communications is ideal.

KNOWLEDGE SKILLS AND ABILITIES:
Large-Scale Software Architectures – Open Systems Architecture
Service Oriented Architecture
Agile Development Methodologies
C/C++ code development, integration and test
JAVA code development, integration and test
System and Subsystem integration and test
TS/SCI security clearance is required

Qualifications:
Bachelor's degree in software engineering or a related technical field is required (or equivalent experience), plus a minimum of 10 years of relevant experience; or Master's degree plus a minimum of 8 years of relevant experience. Agile experience preferred.
TS/SCI security clearance is required
 
Job Location: San Jose, CA
Overtime: Yes
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Software Engineer (Active Secret Clearance Required)

Description:
Job Type: W2 Contract
Duration: 2 years with option for extension

Description:
• The senior software engineer position in the Position, Navigation, and Time (PNT) organization will include software development for real-time embedded GPS receivers designed for military applications.
• Candidates should be able to demonstrate the ability to execute all phases of the software engineering life cycle, including requirements analysis, design, code development, integration, and verification.
• Assignments may also include developing software tools and supporting field demonstration efforts.
• The successful applicant should be knowledgeable and skilled with a variety of development and test tools as well as proficient in development for embedded hardware/software applications.
• Candidates will be expected to independently perform multiple tasks with occasional support from a mentor. 

REQUIRED: 
• Experience with real-time embedded applications using C/C++ or Ada
• Solid understanding of software development processes applicable to embedded applications
• Effective verbal and written communication skills
• Able to function in a dynamic team environment

PREFERRED:
• Experience with MATLAB/Simulink, Eclipse, DOORS, and Application Lifecycle Management (ALM) tools such as JIRA, JAMA, Confluence, and Bamboo
• A working knowledge of Digital Signal Processing techniques
• A working knowledge of Kalman Filters
 
Job Number: R13770
Job Location: Cedar Rapids, IA
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: NESC STAFFING
Attention: Brad McInnis
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
Phone: 603/431-9740
800 Phone: 800/562-3463
Fax Phone: 800/637-2562
Website: www.nesc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Software Test Engineer - Secret Clearance

Description:
***Must have ACTIVE SECRET Clearance***

Develop, administer, operate, and maintain an Aerospace (GPS-related) SW Quality Assurance system in Clifton, NJ.

Job Description:
• Take the lead and ownership of QA processes and procedures and ensure conformance to established company, contractual, and regulatory standards
• Conduct audits and proficiency testing; recommend implementation of preventive measures and corrective action to ensure non-recurrence of deficiencies
• Perform development and execution of Software Quality methods and processes
• Responsible for performing tests, test methods, and test procedures to ensure continuous improvement to Software Quality Assurance standards
• Implements and defines testing methodology and standards to improve results
• Creates and maintains documentation of test results to assist in debugging and modification of software
• Analyzes test results to ensure existing functionality and recommends corrective action
• Consults with senior testers and development engineers to help resolve issues
• Ongoing work towards improving the test process is also expected
• Communicate effectively, both written and oral

Technologies:
C#
XML scripting
GPS
ON Orbit Handbook (OOH)
ClearCase
ClearQuest
Client/Server Architecture

Misc:
Please note that the schedule may vary and significant overtime is expected (40-80 hours per week depending on project needs, often on 2cd/3rd shift). This position is strictly W2 Non-Exempt.
 
Job Number: 18-09527
Job Location: Clifton, NJ
Rate: 55-80
Per Diem: Split
Overtime: Yes
Duration: 6 Month+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Cody Grimes
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Systems Engineer (Active Clearance Required)

Description:
Job Type: W2 Contract
Duration: 2 years with option for extension
Openings: 3

Description:
• The senior systems engineer position in the Position, Navigation, and Time organization will include system development for real time embedded GPS receivers designed for military applications.
• As a part of this team, you will have responsibilities spanning all phases of the engineering life cycle, including requirements analysis, design, integration, verification, and documentation. Assignments may include tasks such as system design work on a variety of military applications including designing, and developing real-time embedded systems, creating and reviewing specifications, and integrating and testing prior to product customer delivery. The position is located in Cedar Rapids, Iowa. 

The successful candidate should be experienced with and will have primary responsibilities in the following areas:
• Good oral and written skills as this position involves working with a diverse team of experienced professionals, customers, and vendors
• Collaborating with customers, both internal and external, to develop system requirements and system design
• Developing verification and validation tests
• Developing support scripts and utilities
• Performing hardware, firmware, and software integration, verification and validation activities 
• Collaborating with other systems integrators, hardware, software, and firmware engineers to resolve system issues
• Developing presentations and technical reports

REQUIRED: 
• Must have strong technical communication skills and a solid understanding of software development processes within real time hardware/software embedded application
• Experience with real time embedded applications
• Must have effective verbal and written communication skills
• Must be able to function in a dynamic team environment
• Possesses an active DoD SECRET security clearance

PREFERRED:
• Experience with GPS systems
• Experience with Matlab or other analysis tool
• Experience with modern software languages (e.g. Python, Java, C, C++, etc.)
• Experience with engineering development tools like DOORS, Jama, Matlab, Simulink, etc.
• Experience with configuration management tools (Subversion)
• Working knowledge of MS Office Apps (Word\Excel\Power Point)
• Security engineering design and development experience
• Security certification and accreditation experience
 
Job Number: R13776
Job Location: Cedar Rapids, IA
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: NESC STAFFING
Attention: Brad McInnis
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
Phone: 603/431-9740
800 Phone: 800/562-3463
Fax Phone: 800/637-2562
Website: www.nesc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer - Military Communications (Secret Clearance)

Description:

Active Secret Clearance REQUIRED


USPRO is woman-owned and operated contract staffing agency that places talented individuals nationwide in the following industries: Aerospace & Defense, Manufacturing & Healthcare. Learn more at www.uspro.net


____________________________________________________________________


Project:



  • The Mission Systems Organization provides integrated communications systems for E6-B, E-4, B2 missions. The system is subject to continuous change as networking and communication technologies evolve.


 


Job Summary



  • We are currently searching for a Senior Systems Engineer to join our team in Richardson, Texas.

  • Typical responsibilities may include leading the technical design and development of other systems engineers, working with the Engineering Project Manager to create and maintain estimates of schedule and budget, and participating as a member of bid team to provide input on effort estimates for proposals of small to medium complexity. 


 


This Senior System Engineer will support these system updates, enhancements, and expansions by:



  • Capture, analyze, decompose, model and create requirements for systems, product or sub-systems of moderate complexity.

  • Conduct verification/validation testing for products and subsystems of moderate complexity and contribute to system integration.

  • Contribute to the development of functional, interface and performance specifications for hardware and software implementation. Contribute to architecturally significant requirements and technical risk area identification.

  • Create and run verification and validation tests for products and sub- systems of moderate to high complexity.

  • Perform trade studies and make value engineering decisions. Defining system architecture and interfaces between internal and external systems. 


 


Required Experience:



  • Candidates must have a minimum of 5 years of system engineering experience performing system engineering in the following areas:

  • Architectural changes and customer-driven enhancements to complex systems.

  • Complex systems typically involved airborne, ground and other systems. 

  • Analyzing performance of complex systems. 

  • Eliciting and managing customer requirements.

  • Experience working in a highly integrated team environment with software, hardware, and mechanical engineers

  • Experience in requirements management tool(DOORS, etc) and SYSML language(EA, NoMagic, etc)


 


Basic Qualifications:



  • US Citizenship

  • Ability to obtain a DoD Security Clearance

  • Experience with all phases of the system development life cycle

  • Bachelor’s degree in a Science, Technology, Engineering or Math (STEM) discipline


 


Desired Experience:



  • MS in System Engineer


 

















Compensation



Benefits



Diversity/EEO



The mentioned pay rate range for this opportunity is the 'target' range set by our client. Although USPRO presents candidates to our clients regardless of what their compensation demands are, the higher your rate is above this range, the lower the chance is for consideration



401K Retirement Plan & Medical Insurance is available for candidates who qualify



USPRO is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees!




 


 













Partial Aerospace & Defense Client List



BAE Systems


Gulfstream Aerospace


Moog Inc.


Sikorsky Aircraft - Lockheed Martin


Orbital ATK


Rockwell Collins


Spirit AeroSystems




 
Job Number: R13802
Job Location: Richardson, TX
Rate: 70-80
Per Diem: Yes, Split
Overtime: Possible
Duration: 24 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: NESC STAFFING
Attention: Brad McInnis
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
Phone: 603/431-9740
800 Phone: 800/562-3463
Fax Phone: 800/637-2562
Website: www.nesc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software / Systems Engineer

Description:
Searching for a Seasoned Architect to work as a SOFTWARE/SYSTEMS ENGINEER
UAV Systems & Software Development, Testing, & Integration

THIS IS A 6-MONTH CONTRACT LOCATED IN SEATTLE, WA
PAYRATE DEPENDENT UPON PREVIOUS EXPERIENCE WITH UAV’S

RESPONSIBILITIES:
• Ensure software standards are met.
• In-flight mission software, data analysis and simulation.
• Elicit, derive, and document software and/or system requirements to meet internal or external customer specifications.
• Define software/and or system architecture, design software modules, and produce associated documentation per corporate or customer standards.
• Write and test software modules and integrate with other software and/or hardware components
• Object Oriented development in JAVA, C++ and C#.
• Testing, design, and integration of software systems.

REQUIRED QUALIFICATIONS:
• Engineers MUST have prior UAV software and integration experience.
• UAV feature/function integration on COTS equipment
• UAV communication, guidance and networking
• Java, C++, AND C# programming
• Object Oriented Development
• Experience with In-Flight Mission Software & Simulation
• This is a government controlled ITAR project. All employees must be US persons.
 
Job Number: WW021918SNV
Job Location: Denver, CO
Rate: YES
Per Diem: YES
Overtime: YES
Duration: 1 YEAR
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: ENEA SOFTWARE AND SERVICES
Attention: Walter Walonoski
Address: 2555 E CAMELBACK RD STE 280
City, State: PHOENIX, AZ 85016
Phone: 480/753-9200
Fax Phone: 480/753-6400
Website: www.enea.com/services/expertise

Software Developer

Description:
OOP, C++, Linux, scripting language, secret clearance
 
Job Location: Denver, CO
Input Date: 11/23/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Michael Geil
Address: 1600 AIRPORT FWY STE 400
City, State: BEDFORD, TX 76022-6871
Phone: 817/545-4009
Fax Phone: 817/545-2006
Email: mgeil@jsginc.com
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Developer CA

Description:
Job ID# 15697BR
Title TEMP Software Developer
Job Summary General Atomics Aeronautical Systems, Inc. (GA-ASI), an affiliate of General Atomics, is a world leader in proven, reliable remotely piloted aircraft and tactical reconnaissance radars, as well as advanced high-resolution surveillance systems.

We recognize and appreciate the value and contributions of individuals with diverse backgrounds and experiences and welcome all qualified individuals to apply.

DUTIES AND RESPONSIBILITIES:•Determine user requirements and specifications and plan for software development within the broader organizational scope. Software development includes end-user, system level, and data management applications,
•Formulate detailed plans for the implementation of software solutions. In addition to program design this includes determining language, platform, and resource requirements.
•Implementation of design including coding, testing, and documentation.
•Deployment of applications across the enterprise including cross- platform compliance and insuring availability of necessary resources.
•Code maintenance including debugging and updating to keep pace with the evolving environment.
•Assist in planning for future applications based on new developments in computer technology.
•Communicate with the software developer group, with users, and with management as well as with the wider community through the publishing and presentation of technical papers.
•Maintain the strict confidentiality of sensitive information.
•Perform other duties as assigned.
•Responsible for observing all laws, regulations and other applicable obligations wherever and whenever business is conducted on behalf of the Company.
•Expected to work in a safe manner in accordance with established operating procedures and practices.




Additional Qualifications


Proficient in C, C++, Linux, Linux Kernel
H.264, NTSC, KLV, MPEG2, FFMPEG
Technologist with a video background




Qualifications Essential Qualifications Typically requires a bachelors degree, masters degree or PhD in computer science, information systems or a related discipline and progressive software development experience as follows; four or more years of experience with a bachelors degree or two or more years of experience with a masters degree. May substitute equivalent experience in lieu of education. Must have a complete understanding of software development concepts, principles, and theory and demonstrate complete understanding and application of programming and analysis concepts. Must possess the ability to understand new concepts quickly and apply them accurately throughout an evolving environment. Ability to organize, schedule, and coordinate work phases and, determine the appropriate approach at the task level or, with assistance, at the project level and to provide solutions to a range of complex problems. Must have strong communication, computer, documentation, presentation, and interpersonal skills, ability to work independently and as part of a team; and, lead a team of less experienced professional employees on semi-routine tasks. Able to work extended hours as required.

City San Diego
State California
Travel Percentage Required 0% - 25%
Clearance Required? Desired
Work Schedule Rule 9/80
Temp Assignment Duration (# of Days) 365
 
Job Number: JE-15697
Job Location: San Diego, CA
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer

Description:
• Strong C/C++ programming experience
• Experience with VxWorks, Linux
• Experience with Visual Studio or equivalent
• Understanding of test architectures and software abstractions • Strong communications skills and ability to work independently

• Programming language familiarity preferred: C#, Visual Basic, Windows, LINUX shells, MATLAB
• Familiarity with embedded engineering applications
• Familiarity with design and performance testing of RF, Digital, Optical, or Analog circuits/assemblies
• Familiarity with digital logic design and implementation
• Capable of providing Hardware Support utilizing: Spectrum Analyzers, Network/Signal Analyzers, Signal Generators, RF Power Meters, RF Attenuators/Switches/Couplers, Function/Waveform Generators, Data Acquisition and Control Systems, DMMs, High Voltage P/Ss, Analog I/O, Digital I/O, Word/Excel Automation
• Related Support: Software Driver Development, Hardware Driver Development, Test Method Development, Test Plan/Procedure/Requirements Development, Schematic Interpretation, FPGA Programming
 
Job Location: VA
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer

Description:
Required Experience/Qualifications
o Object oriented design
o Microsoft Visual Studio
o C and C++

Desired Experience
o Qt application framework
o GNU tools (gcc, gdb, etc.)
o Some understanding of aerial vehicle design and flight operation would be helpful
o Some understanding of general engine design and behavior would be helpful
o TCP/IP and UDP protocols
o Multi-threading
o PC-Lint
o MATLAB
o SVN/Git
o Inertial Measurement Unit (IMU)

Additional bonus points for:
o Global Positions Systems (GPS)
o Geographical Information Systems (GIS)
o GIS mapping formats
 
Job Number: 41500
Job Location: Hood River, ORE
Rate: $85-$90/hr
Per Diem: split
Duration: 6-12 mos
Start Date: soon
Input Date: 11/14/2020
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Jim Pyle
Address: 7310 RITCHIE HWY STE 400
City, State: GLEN BURNIE, MD 21061-3092
800 Phone: 866/277-3343
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer

Description:
Must be US Citizen

- Software savvy CE
- Significant development of Windows applications
- Familiar with Mil-STD-1553
- Familiar with remote reprogramming of electronics
- C++ using MicroSoft Visual Studio 2013
 
Job Number: 41655
Job Location: Huntsville, AL
Per Diem: Split
Overtime: Possible
Duration: 6+Mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PANTHER GROUP
Attention: Bob
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer

Description:
No Clearance Needed

-Software savvy CE
-Significant development of Windows applications
-Familiar with Mil-STD-1553
-Familiar with remote reprogramming of electronics
-C++ using MicroSoft Visual Studio 2013
 
Job Number: 41655
Job Location: AL
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 mos +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer

Description:
Active Secret Clearance

Must have experience with Linux kernel development, Unified Extensible Firmware Interface (EUFI) development, and strong Python, C, C++ experience.
Must have experience with DoD lifecycle and effective communication skills.
Familiarity with the uses of a Trusted Platform Module (TPM), cryptography, asymmetric and symmetric encryption and OpenSSL, Internet Protocol Security (IPSEC), key management in Linux, hardware security, Open VPN and SE Linux.
 
Job Location: AL
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer

Description:
Notes from the Hiring Manager:

* Position is for direct hire / perm placement but you'll be working onsite at a client in Gaithersburg, MD
* Needs an active TS/SCI Clearance; may consider inactive TS/SCI Clearance if able to be transferred to active
* Will act as the Subject Matter Expert (SME) & must have outgoing personality & excellent communication skills
* Geographic Scope (GS) Spatial Scientist or Geography/Geographic background preferred

Summary

Seeking a talented and creative Senior Enterprise Web Services Developer to join software team and help design, develop, test and deploy our web-based geospatial software product line. This position will be based out of Gaithersburg, MD, but will also require customer site visits and regular visits to the main office in Sterling, VA. Candidates must possess strong verbal and written communication skills as they will need to participate on the program’s SCRUM teams. Daily responsibilities will include gathering requirements for web-based imagery exploitation tools, enhancing our current imagery exploitation to meet new requirements, integrating solutions into the program’s enterprise architecture, and assisting with deployment to the customer site.

Specific Duties:
> Requirements analysis, design, and development of web services and application software
> Integrating web-based applications and services into larger geospatial exploitation enterprise systems
> Help capture and evolve future requirements and develop best practices for web developers
> Working with onsite development teams to define clean client-server interfaces and quality assurance teams to define testing strategies
> Interacting with government and prime contractor personnel throughout the program lifecycle

Qualifications:
> Applicants must demonstrate proficiency at understanding geospatial software products at a technical level and how these products interoperate with other technologies.
> Applicants must be accomplished web developers experienced in the entire software development lifecycle.
> Successful candidates will have the ability to prioritize and to complete multiple concurrent tasks in a fast-paced, deadline-driven environment.
> Experience with Web Services/SOA/SaaS architectures
> Experience implementing RIA applications using REST/JSON
> Knowledge of modern web technologies: HTML5, CSS3, JavaScript, browser compatibilities, mobile, etc.
> Experience with elastic cloud architectures (AWS, Azure, etc.)
> Experience with AGILE development methodologies
> Educational background or work experience in either imaging or geospatial sciences is a strong plus
> Ability to communicate complex technical concepts to a diverse audience, including upper management and customers
> Ability to work cooperatively in multi-discipline teams is essential

Requirements:
> Bachelor’s degree in Computer Science, Information Systems, Remote Sensing, GIS or a related field.
> 3 - 5+ years of relevant software development experience in a team environment
> An active TS/SCI security clearance (see notes above also)

Mark A Ludwig
Vice President
Global American Staffing
Email: mludwig@globalams.us
Direct: (508) 434 – 6180
Office: (508) 230 – 5030 x123
 
Job Number: 035_2017
Job Location: Gaithersburg, MD
Rate: Open
Per Diem: No
Overtime: Yes
Duration: Direct / Perm Hire
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: GLOBAL AMERICAN STAFFING
Attention: Mark A Ludwig
Address: 12 HARDING ST STE 204-205
City, State: LAKEVILLE, MA 02347
Phone: 508/230-5030
800 Phone: 800/510-8050
Fax Phone: 508/923-0005
Website: www.globalamericanstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer II

Description:
Software Engineer II

Location: Savannah, GA
Pay Rate: $50/hr - $60/hr
Duration: Long Term W2 contract
Shift: First

Unique Skills:
Become a key member of the software team responsible for the Company Cabin Management System and related components within the cabin of advanced Company aircraft.

Principal Duties/Responsibilities:
1) Designs, develops, tests, and integrates software modules of varying scope and complexity to meet program objectives
2) Works within a team environment, promoting cohesiveness and continuous improvement
3) Maintains and troubleshoots multiple software projects designed for various platforms, with primary focus on Java platforms & products
4) Interfaces with other groups and customers as needed during design/development and troubleshooting
5) Maintains a current knowledge of developments, both process and technical, related to software development in order to recommend innovations to improve quality and effectiveness, as well as to offer creative and informed opinions in the course of troubleshooting and debugging.
6) Participates as needed in any or all of the software design phases, including requirements generation, software design, code implementation, validation, and documentation of the results

Required Skills:
* Self-motivated and able to work under limited supervision when required
* Proficiency developing/maintaining Java applications required
* Experience using revision control required, git preferred
* Ability to follow a software development process, such as Agile
* Experience with one or more of the following a plus: UI/UX design/development, Design Patterns, Spring
* Network engineering skills are a plus

Education and Experience Requirements:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 18 months related engineering experience with Bachelors degree. Experience credit will be considered for related advance degrees limited to 2 years for Masters Degree and 4 years for PhD in fields applicable to this job position.

Position Purpose:
Performs engineering work related to the investigation and the solution of technical problems associated with research, design, development, service and manufacture of Company aircraft.

Additional Principal Duties and Responsibilities/Essential Functions:
1. Solves typical engineering problems within assigned discipline
2. Provides technical assistance to engineering staff and contributes to completion of project milestones 3. Responsible for a complex engineering assignment, or a full project of lesser complexity
4. Follows established schedules while developing plans for engineering assignments
5. Obtains appropriate level of supervisor approvals for work accuracy and adequacy
6. Proficiently applies company/organization policies and procedures

Additional Functions:
1. Actively works to improve daily processes, and ensures all work meets customer requirements
2. Maintains a current and up-to-date knowledge of developments and application of technical principles, theories, and concepts in assigned field of expertise
3. Performs other duties as assigned

Other Requirements:
1. The level of technical skills and abilities appropriate for this grade will be established by each discipline
2. Applies knowledge to provide solutions to a variety of technical problems of moderate scope and complexity, using a combination of judgment with defined practices and procedures
3. Failure to achieve results, or erroneous decisions or recommendations, may cause delays in program schedules and/or allocation of additional resources
4. Ability to convey technical concepts in both written and verbal formats
5. Contacts are primarily within the organization, with occasional customer contacts on routine issues
6. Works under general supervision for routine tasks of minor complexity
7. With supervision/mentorship, can coordinate the activities for lower level engineering staff
 
Job Number: 8598
Job Location: Savannah, GA
Rate: 50-60
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer with active secret / C++ 1553 CA

Description:
161743
Requirement# AERO-REQ-0764
Work Location Palmdale, CA
Work Week 9/80
Priority High
Needed Date 02/28/2018
End Date 06/01/2019
Number of Resources 1
Security Clearance Secret


Title Software Engineer
Description
The Skunk Works (Lockheed Martin Advanced Development Programs) is seeking world class talent in Mission Systems and Software to be a part of a team that will carry on our 70 year tradition of making history in advanced aircraft development.The selected applicant will utilize advanced technical concepts in support of software products within Advanced Development Programs (ADP). The applicant will be responsible for the design, development, integration, and testing of airborne avionics embedded software, ground-based application software, and/or simulation software. Applicant must be able to support the full software development life cycle – including requirements and configuration management - and work in a mature software process environment. The position requires interfacing with various disciplines, including Systems Engineering and Integration & Test. Applicant must be capable of independently designing and creating software solutions based on limited information on rapidly evolving projects. This role requires a highly motivated, organized engineer that is familiar with all aspects of mission systems development. Applicant must have excellent oral and written communication skills.The applicant may gain experience in avionics subsystems such as navigation guidance, data links, communication links, stores management, weapons integration, mission computers, electronic warfare, serial interfaces, analog and digital I/O, and networking.

Skill/Experience/Education
Mandatory:

Embedded software development using C or C++ Development of real-time systems or use of real-time operating systems (RTOS), such as Wind River VxWorks or Green Hills Integrity

Desired:

Experience with the following: - Developing software for air vehicle or mission systems - Rhapsody or other model-based software development - Integrating hardware and software - Data Acquisition and telemetry systems - MIL-STD-1553 - MIL-STD-1760 - Configuration management



Interview Required Yes

Shift 1st Shift

OT AllowedYes (OT Limitation: No)
Travel No
Non-Exempt

Rates
0-4 Yrs Pay Rate: 65.00 USD
5-8 Yrs Pay Rate: 70.00 USD
9+ Yrs Pay Rate: 75.00 USD
 
Job Number: JE-0764
Job Location: Palmdale, CA
Rate: 65-75/hr DOE
Per Diem: no
Duration: 4 months +
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer with active secret / Matlab Simulink CA

Description:
160101
Requirement #AERO-REQ-0625
Work Location Palmdale, CA
Work WeeK 9/80-A
Priority High
Needed Date 08/29/2017
End Date 05/29/2018
Number of Resources 1
Security Clearance Secret (Prime Contract:, Can start w/o clearance:No, Interim Clearance Sufficient:No)


Title: Software Engineer

Description
Develop, analyze, integrate, and test flight control laws and embedded software for the Advanced Development Programs (ADP, Skunk Works) Flight Control and Vehicle Management Systems Integration team. Contribute to software requirements, design, code, reviews, and test of operational flight programs. Good oral and written communication skills required as is the ability to flex and adapt in a fast-paced team environment. Selected applicant will be subjected to government security investigation and must meet eligibility requirements for access to classified information and special program clearances
Candidate must possess an active SECRET clearance.

Skill/Experience/Education
Mandatory:

Candidate must have Flight Control system experience and Experience with MATLAB, OR Simulink
Candidate must possess an active SECRET clearance.
Desired:

Bachelor's Degree in Electrical, Mechanical or Aerospace Engineering


Interview Required Yes
OT Allowed Yes (OT Limitation: No)
Travel No
Non-Exempt
Rates
0-4 Yrs Pay Rate: 65.00 USD
5-8 Yrs Pay Rate: 70.00 USD
9+ Yrs Pay Rate: 75.00 USD
 
Job Number: JE-0625
Job Location: Palmdale, CA
Rate: 65-75/hr DOE
Per Diem: no
Duration: 9 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Project Manager

Description:
Software Project Manager

Location: Centennial, CO
Pay Rate: DOE
Duration: 6-12 month W2
Schedule: 9/80, exempt OT
**MUST be a U.S. CITIZEN; NO DUAL CITIZENSHIP**

Description:
• Sr experience requested/required
• Execute the complete software development lifecycle.

Responsible for planning and defining scope and task sequence, team coordination, resource planning, developing schedules, time estimating, cost estimating, and developing a budget.

Requirements:
- Senior project experience requested/required
- SDLC experience required
- Bachelors degree or higher
- Software management experience required
 
Job Number: 8703
Job Location: Centennial, CO
Rate: DOE
Per Diem: Split Possible
Overtime: Exempt
Duration: 6-12 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Test Engineer

Description:
No Clearance Required

Experience with scripting languages (i.e. Bash, Perl, Python)
Knowledge of vehicle / computing communication busses (Gigabit Ethernet, RS-232, CAN) and their protocols
Experience with Ethernet and CANbus troubleshooting
Experience with National Instruments’ products including TestStand, VeriStand, & LabVIEW
Experience supporting, implementing, and/or designing high fidelity software simulation models for SIL, HIL, & Real-Time test environments. (Simulink Preferred)
Systems and Software requirements analysis (including requirement writing, and specification generation)
Experience generating and writing supporting documents such as test system software requirements, user manuals / tools documentation, and software validation documents
Develop and maintain test scripts using National Instruments TestStand
Experience with National Instruments’ products including LabVIEW, VeriStand, & TestStand
Experience supporting, implementing, and/or designing high fidelity software simulation models for SIL, HIL, & Real-Time test environments. (Simulink Preferred)
Experience generating and writing supporting documents such as test system software requirements, user manuals / tools documentation, and software validation documents
 
Job Number: 2758
Job Location: MN
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr Mechanical Engineer

Description:
Job Description:
Must be able to obtain a Secret Clearance. Can start un-cleared or with an interim.

The Sr Mechanical Engineer II is responsible for the conceptual and detailed mechanical design of EO Sensors and Laser products for application in ground, airborne and space-based defense.
Responsibilities include the design of structures, mechanisms, thermal systems and electronic enclosures.
Candidate will be expected to follow established procedures and instructions while working closely with program / functional supervision to ensure the overall design objectives are met. Contacts are primarily with the immediate section manager, team lead, project leaders and other personnel (peers) within the applicable program. The engineer in this position must be able to help develop requirements, lead trade studies and evaluate supplier proposals and data. The position requires strong CAD and geometric tolerancing (GD&T) skills and the ability to work with cross-functional engineering teams involving optics, structural analysis, thermal management. Develops technical solutions to complex problems that require the regular use of ingenuity and creativity using CAD software like CREO and performs preliminary mechanical analyses. Guides the successful completion of major programs and may function in a project leadership role. Erroneous decisions or recommendations would typically result in failure to achieve major organizational objectives.

Will assist in understanding the design requirements, coordinating mechanical design, preparation of design reviews, presentation of the engineering to management as well as customers. The position requires the mechanical designer to understand tasks involving pre-proposal, conceptual, preliminary, and critical design build, test, and delivery of complex Electro-Optical Sensors. The engineer in this position must lead the team from a deep, wide breadth and strong technical background involving material selection, optical layout, thermal management, precision mechanical mounting and motion, and structural optimization. This position also requires an engineer familiar with design for manufacturing and producibility.

Required Skills:
* CAD software, specifically Creo.
* Geometric Tolerancing (GD&T)
* Able to present to customer
* Maintain positive customer and supplier relationships
* At least 6 years of professional experience

Desired Skills:
* CAD software, specifically Creo and Windchill
* Hands on experience in Electro-optical sensors
* Microsoft Project
* Prior experience in DoD or Aerospace

Required Education:
* A Bachelor's degree in Mechanical Engineering or related Engineering field
* Prefer to also have a Master's Degree
* Minimum 6 years related experience
 
Job Number: CA41190
Job Location: El Segundo, CA
Rate: 70.00
Per Diem: Possible
Overtime: Possible
Duration: 12 months
Input Date: 11/14/2020
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Bill Carriveau
Address: 7310 RITCHIE HWY STE 400
City, State: GLEN BURNIE, MD 21061-3092
800 Phone: 866/277-3343
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr Mechanical Engineer

Description:
RESPONSIBILITIES INCLUDE:
- Lead the development of test equipment hardware and software for testing both new and legacy products. This includes Planning, design, integrate, verification, validation, and documentation activities for relatively simple to moderately difficult test solutions for both new and legacy products.
- Develop test solutions bids by providing accurate cost and schedule estimates along with technical descriptions of proposed test solutions.
- Follow Life Cycle Test Strategy Development guidelines to provide cost effective test solutions utilizing modularity and reuse whenever possible.
- Perform concurrent test development with product development by coordinating with product development teams to direct design for testability, documenting test requirements, and generating test procedures for final product acceptance.
- Work with Operations and Engineering to develop test solutions required for Qualification and Acceptance testing, and ESS/HASS/HALT testing the product in accordance with manufacturing test plans.
- Provide prompt test equipment support for legacy systems for Operations, Service locations and Product Support to minimize product stop shipments.
- Support outsourcing efforts per ARINC-625 test equipment development outsourcing standard -

EXPERIENCE REQUIRED:
- Must be capable of requirements generation, development, design, and drafting of complex test equipment utilized for testing of electro-mechanical aerospace products including; flap actuation systems, Horizontal Trim Stabilizer Actuators (HSTA's), and Pilot Controls Systems. Candidate should be experience with product testing which includes manufacturing assembly and test, Endurance and Fatigue testing based on customer requirements. Must have in-depth understanding of both MIL-STD-810 (military) and RTCA/DO-160 (commercial) specifications and ARINC 625-2 (Test Equipment Development).
- Must have an in-depth understanding of following principals and equipment: Kinematics, metallurgic properties, stress and structural analysis, RVDT's, LVDT's, load cells, load cell amplifiers, Programmable Logic Controllers (PLC's), DC Brushless Motors/ Controllers and National Instruments data control/acquisition hardware and associate software.
- Must have experience using electrical, mechanical and hydraulic test measurement equipment, Ansys 4.5, Unigraphics NX6, Autocad, and Solid Works Mechanical Design software and desktop PC applications programs including MS Word, Excel, Power Point, Visio and MS Project. Additionally, experience in programming while using National Instruments Labview for Windows, C, C++, C# programming is a plus. Must be able to read and interpret mechanical assembly drawings and hydraulic, mechanical and electrical schematics.
- Must be motivated to learn at a fast pace, work autonomously and within a team environment. Experience with DOORS software and system requirements management is highly preferred.
- Must possess excellent organizational skills and be capable of managing multiple projects simultaneously.
- Must have excellent verbal and written communications communication skills and be able to work equally effectively with exempt and non-exempt personnel as well as subcontract suppliers.
- Required to have demonstrated test engineering competency with a minimum of Ten (10) years of related experience. Must possess excellent skills using Microsoft Office tool suite (Word, Excel, Project, Visio)

EDUCATION REQUIREMENT:
This position requires a degree in Mechanical Engineering or equivalent
 
Job Number: 53471
Job Location: Irvine, CA
Rate: Open
Per Diem: Yes
Duration: 6 months plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Rich Nguyen
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr Mechanical Engineer II / Must be able to obtain a Secret Clearance / CREO / electro-optical CA

Description:
161376
Sr Mechanical Engineer II (8100392) - El Segundo CA


Must be able to obtain a Secret Clearance. Can start uncleared or with an interim. The Sr Mechanical Engineer II is responsible for the conceptual and detailed mechanical design of EO Sensors and Laser products for application in ground, airborne and space-based defense. Responsibilities include the design of structures, mechanisms, thermal systems and electronic enclosures. Candidate will be expected to follow established procedures and instructions while working closely with program / functional supervision to ensure the overall design objectives are met. Contacts are primarily with the immediate section manager, team lead, project leaders and other personnel (peers) within the applicable program.
The engineer in this position must be able to help develop requirements, lead trade studies and evaluate supplier proposals and data. The position requires strong CAD and geometric tolerancing (GD&T) skills and the ability to work with cross-functional engineering teams involving optics, structural analysis, thermal management. Develops technical solutions to complex problems that require the regular use of ingenuity and creativity using CAD software like CREO and performs preliminary mechanical analyses. Guides the successful completion of major programs and may function in a project leadership role. Erroneous decisions or recommendations would typically result in failure to achieve major organizational objectives. Will assist in understanding the design requirements, coordinating mechanical design, preparation of design reviews, presentation of the engineering to Raytheon management as well as customers. The position requires the mechanical designer to understand tasks involving pre-proposal, conceptual, preliminary, and critical design build, test, and delivery of complex Electro-Optical Sensors. The engineer in this position must lead the team from a deep, wide breadth and strong technical background involving material selection, optical layout, thermal management, precision mechanical mounting and motion, and structural optimization. This position also requires an engineer familiar with design for manufacturing and producibility.

Required Skills: • CAD software, specifically Creo. • Geometric Tolerancing (GD&T) • Able to present to customer • Maintain positive customer and supplier relationships • Ability to obtain security clearance • At least 6 years of professional experience
Desired Skills: • CAD software, specifically Creo and Windchill • Hands on experience in Electro-optical sensors • Microsoft Project • Prior experience in DoD or Aerospace Required Education: • A Bachelor's degree in Mechanical Engineering or related Engineering field • Prefer to also have a Master's Degree • Minimum 6 years related experience This position requires a U.S. person or the ability to obtain an Export Authorization from the appropriate government agency for non-U.S. persons.
 
Job Number: MB-8100392
Job Location: El Segundo, CA
Rate: 64-74/hr DOE
Duration: 6-12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Staff Systems Engineer

Description:
*Ability to deal with complex problems in an international environment of cultural diversity
*Lifecycle Product development from concept through verification and delivery to the customer including integration onto the specific platform
*Architecting complex MWS systems, guide the development efforts, review and approve designs concepts, models, and drawings on multiple programs
*Ability to support multiple programs simultaneously
*Technical briefings to management and customers
*Excellent planning, management and communication skills
*Development of technical & product roadmaps and competitive assessments
*Analysis of Customer Documentation to create System Level Concepts of Operations (CONOPS), Specifications, Architectural Design and Interface Control Drawings (ICDs)
*Perform the sophisticated analysis, design and testing of complex systems
*Technical interface between ESA’s external customers and sub-contractors
*Provide technical support to customer and user lab and on-aircraft testing
*Develop and analyze highly complex algorithms
*Support proposal development activities, including proposal text development, cost estimating and presentation activities
*Proficiency in the use of Requirements Management and Model Based Systems Engineering tools
*Work independently and with internal/external organizations
*Willingness to travel domestically and internationally
*Mentor and develop junior engineers in this domain

Qualifications:
*Bachelor's Degree in Aeronautical, Electrical, Electronic, Mechanical, Software or Systems Engineering, or Computer Science
*10+ years functional experience may substitute
*Design and development of Missile Warning Systems, including but not limited to:
-Detailed knowledge of integration of Infra-Red Missile Warning Systems
-Detailed knowledge of single color and dual color Infra-Red Missile Warning System technologies
-EW system hardware design knowledge as it relates to the detection and countering of Radar and missile system engagements (IR & UV)
-Electro-Optical Distributed Aperture Systems
-Digital signal processing concepts including FFT, and DRFM
-Detailed knowledge of algorithm performance associated with MWS and system simulation and modeling
*Knowledge of F-16, F-35 and UH-60 military platforms preferred

Benefits: Visit http://www.teamglobal.com/benefits.html for more details.
 
Job Number: 127393
Job Location: Fort Worth, TX
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: GCP Recruiter
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Staff Systems Engineer-Degraded Visual Environment

Description:
*Ability to deal with complex problems in an international environment of cultural diversity.
*Lifecycle Product development from concept through verification and delivery to the customer including integration onto the specific platform.
*Technical leadership during the design/implementation phase.
*Technical briefings to management and customers.
*Excellent planning, management and communication skills.
*Development of technical & product roadmaps and competitive assessments.
*Lead and/or review of proposals and participate in customer presentations.
*Analysis of Customer Documentation to create System Level Concepts of Operations (CONOPS), Specifications, Architectural Design and Interface Control Drawings (ICDs).
*Lead the sophisticated analysis, design and testing of complex systems
*Technical interface between ESA’s external customers and sub-contractors.
*Provide technical support to customer and user lab and on-aircraft testing
*Develop and analyze highly complex algorithms.
*Support proposal development activities, including proposal text development, cost estimating and presentation activities.
*Proficiency in the use of Requirements Management and Model Based Systems Engineering tools, preferably DOORS and Rhapsody
*Work independently and with internal/external organizations
*May travel Domestically and Internationally.

Qualifications:
*Bachelor's Degree in Aeronautical, Electrical, Electronic, Mechanical, Software or Systems Engineering, or Computer Science
*5-10 years functional experience may substitute
*Knowledge of AH-1W, V-22, AH-64, UH-60 and CH-47 military helicopter platforms preferred.
*Design and development of Helmet Mounted Display Systems, including but not limited to:
*Certification of helmet mounted systems, including safety of flight and Operational Software certification.
*Helmet mounted tracking systems, cockpit magnetic mapping characteristics, functions and anomalies, algorithm mapping and development, degraded visual enhancement capabilities, and weapon slaving accuracy.
*Hardware and software integration, checkout, test, and debug from laboratory through aircraft installation, ground and flight test.
*Helmet Optics
*Field Support for all “non-standard” system issues.
*Providing training at Government facilities in country or overseas.
*Responsible for developing technical strategic plans with a team.

Benefits: Visit http://www.teamglobal.com/benefits.html for more details.
 
Job Number: 127392
Job Location: Fort Worth, TX
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: GCP Recruiter
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Engineer - Durability & Damage Tolerance CA

Description:
16974/161314

Title Stress Engineer - Durability & Damage Tolerance
Job Summary

We have an exciting opportunity for a Stress Engineer specializing in Durability and Damage Tolerance in our Airframe Integrity Group. Under general supervision with limited review, this position is responsible for determining and developing effective approaches for resolving a wide range of difficult engineering problems. Assignments are normally outlined in terms of overall objectives and anticipated results. Work is reviewed at milestones or at completion for adequacy in meeting objectives. Documents findings, communicates results to engineering staff and makes technical presentations as required. May coordinate segments of a specific project and may have frequent inter- organization and customer contact on difficult technical issues. Provides direction to design or technical staff and may provide direction to less experienced professional staff.

DUTIES AND RESPONSIBILITIES:
•Supports operation of engineering systems by evaluating and interpreting needs and problems and develops effective approaches to resolving those issues.
•Responsible for performing structural analysis of aircraft components, assemblies, and systems while working as an integrated team for design studies.
•Structural analysis includes strength, stability, residual strength, fatigue, damage tolerance and fracture analyses of detail designs using both computer modeling analysis methods and classical calculation methods
•Evaluate structural integrity of aircraft structures by way of classical hand and finite element methods.
•Generate documentation to report analysis and test results to support airworthiness certification.
•A working knowledge of FAA and Mil-Spec airworthiness requirements, along with experience with Matlab, Excel and Visual Basic will be advantageous.

Qualifications Essential Qualifications
Typically requires a bachelor’s degree, master’s degree or PhD in engineering or a related technical discipline from an accredited institution and progressive engineering experience as follows; nine or more years of experience with a bachelor’s degree, seven or more years of experience with a master’s degree, or four or more years with a PhD. May substitute equivalent engineering experience in lieu of education. Demonstrates an extensive technical expertise and application of engineering principles, concepts, theory, and practice with the ability to organize, plan, schedule, conduct, and coordinate workloads to meet established deadlines or milestones with some experience in project leadership. Must possess the ability to understand new concepts quickly and apply them accurately throughout an evolving environment. Strong communication, presentation, and interpersonal skills are required enabling an effective interface with other departments and/or professionals, and capable of representing the organization as a prime technical contact, as well as providing leadership and guidance to less experienced professionals. Customer focused, formulates plans based on the development of innovative new designs in resolving advanced technical engineering problems. Must be able to work both independently and in a team environment. Able to work extended hours as required. A Professional Engineering License, original work(s) published in professional engineering journals, and invited to present one or more original works to an engineering symposium are desirable.

Additional Qualifications
• Typically requires a bachelor’s degree, master’s degree or PhD in engineering or a related technical discipline from an accredited institution and progressive engineering experience as follows; nine or more years of experience with a bachelor’s degree, seven or more years of experience with a master’s degree, or four or more years with a PhD. May substitute equivalent engineering experience in lieu of education
• Must have a complete understanding of engineering concepts, principles, codes, and theory; experience demonstrating a broad application of those concepts; and, expanding knowledge of principles, concepts, theory, and practices in related technical specialties.
• Must be familiar with stress, dynamics, and vibration analysis of metal and composite structures.
• Experience with durability and damage tolerance of metallic structures using NASGRO /AFGROW is required
• Working knowledge with NASTRAN or ABAQUS software is required.
• Must have at least 2 years of working experience using Finite Element analysis tools like NX SimCenter, Hypermesh, FEMAP/NASTRAN, and ABAQUS.
• Knowledge of composite material behavior, laminate theory, and analysis is desired.
• Able to work extended hours as required.

City San Diego
State California
Travel Percentage Required 0% - 25%
Clearance Required? No
Work Schedule Rule 9/80
Temp Assignment Duration (# of Days) 180
Max rate $70/hr
 
Job Number: JE-16974
Job Location: San Diego, CA
Rate: 70/hr max
Per Diem: no
Duration: 6 months +
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Engineer CA

Description:
16211
Title Stress Engineer
Job Summary General Atomics Aeronautical Systems, Inc. (GA-ASI), an affiliate of General Atomics, is a world leader in proven, reliable remotely piloted aircraft and tactical reconnaissance radars, as well as advanced high-resolution surveillance systems.

We recognize and appreciate the value and contributions of individuals with diverse backgrounds and experiences and welcome all qualified individuals to apply.

We have an exciting opportunity for a Stress Engineer in our Airframe Integrity Group at GA-ASI. Under general supervision with limited review, this position is responsible for determining and developing effective approaches for resolving a wide range of difficult engineering problems. Assignments are normally outlined in terms of overall objectives and anticipated results. Work is reviewed at milestones or at completion for adequacy in meeting objectives. Documents findings, communicates results to engineering staff and makes technical presentations as required. May coordinate segments of a specific project and may have frequent inter- organization and customer contact on difficult technical issues. Provides direction to design or technical staff and may provide direction to less experienced professional staff.

DUTIES AND RESPONSIBILITIES:•Supports operation of engineering systems by evaluating and interpreting needs and problems and develops effective approaches to resolving those issues.
•Responsible for performing structural analysis of aircraft components, assemblies, and systems while working as an integrated team for design studies.
•Structural analysis includes calculation of loads, stress analysis, fatigue analysis, and vibration analysis.
•Evaluate structural integrity of aircraft structures by way of classical hand and finite element methods.
•Generate documentation to report analysis and test results to support airworthiness certification.
•A working knowledge of FAA and Mil-Spec airworthiness requirements, along with experience with Matlab, Excel and Visual Basic will be advantageous.

Qualifications Essential Qualifications Typically requires a bachelors degree, masters degree or PhD in engineering or a related technical discipline from an accredited institution and progressive engineering experience as follows; four or more years of experience with a bachelors degree or two or more years of experience with a masters degree. May substitute equivalent engineering experience in lieu of education. Must have a complete understanding of engineering concepts, principles, codes, and theory; experience demonstrating a broad application of those concepts; and, expanding knowledge of principles, concepts, theory, and practices in related technical specialties. Must possess the ability to understand new concepts quickly; apply them accurately throughout an evolving environment; organize, schedule, and coordinate work phases; and, determine the appropriate approach at the task level or, with assistance, at the project level to provide solutions to a range of complex problems. Must have excellent communication, computer, documentation, presentation, and interpersonal skills, ability to work independently and as part of a team; able to perform complex tasks in one engineering area; and, lead a team of less experienced professional employees on semi-routine tasks. Able to work extended hours as required. A Professional Engineering License is desirable.
Additional Qualifications Essential Qualifications:
• Typically requires a bachelors degree, masters degree or PhD in engineering or a related technical discipline from an accredited institution and progressive engineering experience as follows; four or more years of experience with a bachelors degree or two or more years of experience with a masters degree. on.
• Must have a complete understanding of engineering concepts, principles, codes, and theory; experience demonstrating a broad application of those concepts; and, expanding knowledge of principles, concepts, theory, and practices in related technical specialties.
• Must be familiar with stress, dynamics, fracture, fatigue and damage tolerance analysis of metal and composite structures.
• Working knowledge with NASTRAN or ABAQUS software is required.
•Must have at least 2 years of working experience using Finite Element analysis tools like Hypermesh, Pro/Mechanica, FEMAP/NASTRAN, and ABAQUS.
• In addition knowledge of aeroelastic analysis and modal testing is desirable. Requires knowledge of composite material behavior, laminate theory, and analysis
• Able to work extended hours as required.
City San Diego
State California
Travel Percentage Required 0% - 25%
Clearance Required? No
Work Schedule Rule 9/80
Temp Assignment Duration (# of Days) 180
 
Job Number: JE-16211
Job Location: San Diego, CA
Rate: 60-65/hr max
Per Diem: no
Duration: 6 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Engineer II (Fatigue & Damage Tolerance)

Description:
Position Summary: Under the direction of the Engineering manager, supervisor or lead this position will work with the Engineering team to ensure successful integration by providing stress analysis on engineering designs for components, systems and products using mathematical formulas and computer-aided engineering (CAE) systems. The Stress Engineer II will work both independently as well as part of a team to complete specific projects related to both commercial and military aircraft components to determine stress requirements of a product. Specific duties and responsibilities include but are not limited to the following:

Essential Duties and Responsibilities:

The Fatigue & Damage Tolerance Engineer II will work with a low level of supervision and must rely on experience and judgment to plan and accomplish goals while performing a variety of complex tasks in the following areas:

Perform fatigue and damage tolerance assessment of metallic structure
Make analytical fatigue life predictions
Perform crack growth and residual strength analysis using NASGRO
Develop fatigue spectrums and support fatigue and damage tolerance testing
Make recommendations on design improvements related to fatigue and damage tolerance
Analyzes engineering designs, schematics, and customer specifications to determine stress requirements for a product.
Formulates mathematical analysis or finite element model of product.
Prepare preliminary stress analysis reports and provide information to supervisor or lead.
Capable of airframe structural analysis for fatigue stresses.
Perform structural analysis on conceptual layouts as well as detail components.
Consult with Design Engineer to assess design modifications of product based on results of analysis.
Will focus primarily on existing products and processes.
Ability to perform classical hand stress calculations, finite element analysis utilizing finite element software such as NASTRAN or ANSYS.
Participates with other staff to contribute to project completion.

Qualifications & Skills Requirements:

Requires a bachelor’s degree in engineering and a minimum of 5-9 years of experience in the Aerospace Industry or in a related field.
Intermediate knowledge of finite element modeling, and familiarity with MS Office products.
Basic knowledge of CATIA V5, NASTRAN, and NASGRO.
Physical Requirements: Individual must be able to sit for extended periods of time, working at a desk and/or attending meetings. May occasionally require employee to stand and/or walk and occasionally lift and/or move up to 10 pounds. Will need to be able to move throughout the office and talk/hear or otherwise communicate with other employees and management. Work will be performed in an office environment. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential duties of the job.

LMI is an equal employment opportunity employer. Consistent with applicable law, LMI provides access and opportunities to those with disabilities. This includes providing reasonable accommodation to individuals with disabilities and disabled veterans who seek to access the company’s online application system. If an applicant is unable to fully access the online application system, LMI will provide a reasonable accommodation. Applicants with disabilities may contact us at 636-916-2400 for assistance accessing the on-line application system. Callers should have a detailed description of the requested accommodation, their name and preferred method of contact ready for LMI‘s Human Resources Department. LMI will make every effort to respond within two (2) business days. This phone number is not for the general submission of application materials.

LMI is an E-Verify Employer.

LMI is an Equal Employment Opportunity/Affirmative Action/Disability/Veterans Employer

Click the link and follow instructions on HOW TO APPLY: LMI ENGINEERING JOB OPPORTUNITIES
 

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis Engineer 1/2

Description:
Please share updated resume at ravi@iconma.com

Structural Analysis Engineer 1/2

Location: Huntsville, AL || Ridley Park, PA
Duration: 6 Months

Job Description:
Performs basic structural analysis using well defined analysis tools to develop the structural environment, characteristics and performance. Supports test execution and analyzes/reports test results to validate and verify systems and components meet requirements and specifications. Defines and documents certification and test results to substantiate for customers and regulatory agencies that requirements are satisfied. Supports in-service products by investigating failures and analyzing improvements. Works under general supervision.

Skill Code:
63Y-Structural Analysis

Required Skills:
Category Name Required
Soft Skills Ability to meet deadlines No
Software Skills Abaqus No
Software Skills Nastran No
Software Skills Patran No
Technical Skills Documentation Skills No

Education / Experience:
Bachelor's degree and typically 2 or more years' experience in an engineering classification or a Master's degree with experience in an engineering classification.

Required:
Bachelor or Master degree from an accredited course of study, in engineering, com.
 
Job Number: 17-18843
Job Location: Huntsville & Ridley Park, AL & PA
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Design with active secret / Catia V5 CA

Description:
160829
Requirement#AERO-REQ-0732
Work Location Palmdale, CA (1011 Lockheed Way, Palmdale, CA 93599)
Work Week9/80-A
PriorityHigh
Needed Date01/09/2018
End Date01/09/2019
Number of Resources1
Security ClearanceSecret

TitleStructural Design-N
Description
Design of structural detail parts, assemblies and installations, as well as, systems installations for aircraft. Engineer shall be responsible for development of layouts, preparation of engineering drawings, planning, scheduling, and coordination of activities of assigned subordinate engineers, and support of manufacturing operations and customers in resolving technical problems related to the aircraft structure and systems. Candidate must be able to coordinate efforts with little or no supervision across a wide range of functional organizations, such as Planning, Tooling, Stress, M&P, R&M, Material, Flight Sciences, Test, Manufacturing, and other Design IPTs to ensure that designs meet customer and derived requirements. Candidate must have aerospace design experience with knowledge of configuration management techniques, drafting/drawing conventions, and aerospace specifications and procedures.
Skill/Experience/Education
Mandatory:

Active Secret security clearance.--

This position is located at a facility that requires special access----Proficient with CATIA V5--Understanding of drawing practices, material properties, and manufacturing processes
Desired:

Proficiency with Microsoft Office suite (Word, PowerPoint, Excel, Outlook), Windows Bachelor OR Above Degree in a Engineering Technical Discipline--5 or more years experience in the design of aircraft structures

Skill Matrix
Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory(Yes/No)
CATIA V5 Proficiency in CAD software CATIA V5 4-5 Years Yes
Aircraft Structural Design Proficient with aircraft structural design of composite and metallic parts 4-5 Years Yes



Interview Required
OT Allowed
Non-Exempt
Rate TypePer Hour
Rates
5-8 YrsPay Rate: 90.00 USD
9+ YrsPay Rate: 95.00 USD
 
Job Number: JE-0732
Job Location: Palmdale, CA
Rate: 90-95/hr max
Per Diem: no
Duration: 12 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Dynamics Engineer

Description:
Location: Centennial, CO
Rate: DOE
Duration: 1 year contract
Overtime: Exempt

*****MUST be a U.S. Citizen*****

Job Description:
- 20+ years experience in Structural Dynamics Coupled Loads Analysis to include performing dynamics analysis for launch vehicle structures, specifically Coupled Loads Analysis.

Experience to also include working with:
- Atlas V and/or Delta IV launch vehicles
- Definition of launch vehicle environments (Quasi-Static loads, Low frequency, Sine Vibration, Random Vibration)
- Performing transient and random response analysis of complex aerospace structures
- Processing and evaluating dynamic analysis results (shock spectra, psd, etc)
- Dynamic analysis tools and software (Linux, Nastran, Matlab, C, FEMAP, NX),
- Craig-Bampton reduction process for component models
- Hruda-Benfield damping methodology.
 
Job Number: 8662
Job Location: Centennial, CO
Rate: DOE
Per Diem: Split Possible
Overtime: Exempt
Duration: 1 yr
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Supply Attendants - Atlanta, GA

Description:
STS AeroStaff Services now offers Supply Attendant jobs in Atlanta, Georgia.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Duties:

• Under the direction of the Logistics Supervisor, the Stores Clerk will receive parts/materials from multiple departments to stock locations in a manufacturing process dedicated to the manufacture and integration of aircraft parts and assemblies
• Pull parts/materials from job pick lists in support of production activities
• Maintain shelf life and cycle count programs, and other inventory functions
• Utilize ERP Operating Systems for receiving and inventory transactions
• Ensure that all certification paperwork required for purchased and manufactured parts (i.e. C of C, 8130-3, MSDS, job travelers, etc.) is completed and maintained in the document storage area
• Safely operate Forklifts and other powered trucks in a warehouse environment
• Ensure proper handling and documentation of Hazardous Material and Shelf life items
• Performs cycle counts and other inventory functions
• Pull/Issue parts from inventory for kitting, production and outside customer sales
• Set up and maintain shelving as required to ensure accurate and functional parts accountability and issuance
• Pick up and deliver parts to outside suppliers using company vehicle
• Use manual hand tools (i.e. hammer, drill, pry bar, etc.)
• Perform all other duties assigned by Logistics Supervisor or Supply Chain Planning Manager
• Maintains continuity among work shifts by documenting and communicating actions, irregularities, and continuing needs in job turnovers
• Documents actions by completing production and quality logs
• Updates job knowledge by participating in educational opportunities (offsite / off-shift training) and continuous self-improvement through trade publications
• Accomplishes organization goals by accepting ownership for accomplishing new and different requests (cross training), exploring opportunities to add value to job accomplishments
• Comply with lean manufacturing principles and work with leads and supervisors to explore and implement best practices in the manufacturing process
• Effectively work with co-workers, engineering and management in problem solving and exploring and implementing best practices in our operations
• Be prepared to cross train and be utilized in other aspects in the production process
• Maintains safe operations by adhering to safety procedures and regulations

Qualifications:

• High school diploma or equivalent, completion of vocational training or an apprenticeship will be an asset
• Experience in a Stores/Stockroom type environment (previous aviation experience a plus)
• Experienced with the operation of forklifts in a warehouse environment
• Must have a valid driver’s license and meet the automobile insurance requirements
• Must be a self-starter requiring minimum supervision and perform job assignments with a very high degree of accuracy
• Should have knowledge of typical PC/business software applications. (i.e. Word, Excel and Internet)
• Must have excellent interpersonal skills and be able to interact with a wide variety or people
• Good oral and written communication skills; able to read, comprehend and create written and verbal instructions in the English language
• Must be able to work in a fast paced environment and maintain a high quality of work
• Must be able to work flexible shifts to include overtime and weekends (as needed) in order to meet customer schedules and needs of other departments
• Must be organized and have good communication and problem solving skills
• Must be able to prioritize work assignments and have excellent attention to detail

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 41760
Job Location: Atlanta, GA
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
System Integration/Test Engineer - Level 2

Description:
Location: Lexington, KY
Rate: $25.00 - $39.00/HR
Duration: 6 month contract
Shift: 1st Shift
Overtime: Exempt

**MUST be a U.S. Citizen**
**MUST have an Active Secret Clearance or have had one within the last 2 years**

Description
Our client is seeking a systems engineer (SE) to perform integration and test (I&T) activities in support of the Special Operations Forces Support Activity (SOFSA) Program. As an SE I&T team member, you will work as part of an engineering team based in Lexington, KY. This program is critical to the success of US service men and women deployed throughout the world. Our mission is to rapidly and properly equip the SOF community and its war fighters with the best possible systems and equipment anywhere in the world. The team is focused mainly on modifying existing aircraft and integrating modified components (primarily electrical and mechanical) into various platforms based on customer specifications. The SE I&T Engineer will initially support the rotary mission area, but may occasionally support the fixed wing mission area, as required. The SE I&T Engineer will support the engineering team during design, integration, verification, ground and flight test, and customer support phases of the program. The SE I&T Engineer will develop and present I&T information for internal and external program reviews. The SE I&T Engineer will interface with engineering management, program management, customer I&T points of contact, and other internal organizations to ensure that necessary equipment, facilities, and resources are available to support I&T activities. I&T tasks include test planning and coordination, development of test plans, development of detailed test and demonstration procedures, demonstration and test execution, daily communication of progress to program leadership, integration issue identification and troubleshooting, demonstration/test result evaluation, and documentation of demonstration/test results.

Skill/Experience/Education
Mandatory: (MUST SHOW ON RESUME)
- Proficient in generating I&T work products (Master Test Plan, Demonstration/Test Plans and Procedures, Reports, etc.)
- Experience with planning, coordinating, and executing electronics and mechanical I&T
- Experience in evaluating and documenting I&T results
- Experience with presenting I&T information to internal and external team members
- Familiar with trouble shooting and resolving issues that can arise during I&T activities
- Familiar with Systems Engineering and Design processes
- Proficient with Microsoft Office products
- Ability to travel to perform I&T efforts
- BS in Electrical Engineering, Mechanical Engineering, or Aeronautical Engineering Preferred

Desired:
- Experience with Faro laser or equivalent equipment use for mechanical alignment
- Experience with CAM2 Measure and/or Verisurf software packages
- Experience with data collection systems and Instrumentation
- Experience with RF systems I&T
- Familiarity with rapid response programs
- Experience with the coordination, planning and execution of integration and ground/flight test activities
- Experience in testing US military products and familiarity with military specifications and standards
- Experience in leading and supporting failure analysis and corrective action activities
- Experience in working programs from concept, development, integration, test, and into production
 
Job Number: 8730
Job Location: Lexington, KY
Rate: $25.00 - $39.00/HR
Per Diem: Split Possible
Overtime: Exempt
Duration: 6 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer - Avionic Systems

Description:
Job Description
An experienced system engineer with the ability to develop and/or review system requirements in alignment to customer specifications resulting in hardware and software requirement flow-down. Ability to develop test cases and procedures, test execution, PR generation and resolution, configuration of hardware and software test equipment and diagnose problems
 
Experience:  5 + years
 
Education: Bachelor's degree in Computer Science, EE
 
Specific Hardware/Software:
Avionics: IO interfaces- CAN Bus, IEEE 1394, MIL-STD 1553, A429, RS422, PCIE,
 
Must have skills:
DO-254A, ARP4754A, DO-178C, Requirements development, systems integration and verification, problem analysis and resolution, good communication skills, ability to work independently but as part of a team to provide feedback and problem management, understanding of project management to schedule and budget
 
Desired skills:
DOORs, GEARs,
 
Comparable industries: Automotive, Healthcare, Military (Lockheed, Northrop Grumman, etc.)  Controls background
 
Job Number: 7624-1
Job Location: Grand Rapids, MI
Rate: 60.00 - 70.00
Per Diem: POSSIBLE
Overtime: YES
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Paul Chacon
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer III - (CA) - TOP SECRET

Description:
ACTIVE TOP SECRET CLEARANCE REQUIRED TO START.

Satellite Systems Engineer (Level 3) Contractor for the Satellite Ground Operations and Product Team located in El Segundo, California. Tasking includes full life-cycle development, integration and test in the satellite ground command and control. Assists with the development and test of electronic and electrical system requirements. Performs system tests to verify operational and functional requirements. Supports resolution of product integration issues and production anomalies.
Primary Responsibilities:
• Assists, without supervision, with the validation of system-of-systems concepts or system concepts or subsystem concepts by inspection, analysis, test, and demonstration to assure that the system architecture and design concepts satisfy the intent of the customer requirements.
• Collects data and reports the progress and status of integration and checkout activities, and receives and evaluates results of activities, so that integration activities can proceed. Assists in coordinating resolution of disapproved integration and checkout results by documenting and reporting reasons for disapproval to resolve anomalies.
• Validates system-of-systems interfaces or system interfaces or subsystem interfaces by inspection, analysis, test, and demonstration to assure that the system architecture, design and implementation satisfies the intent of the customer requirements. May also assist, with direct supervision, in overall validation of the above.
• Validates system-of-systems requirements or system requirements or subsystem requirements by inspection, analysis, test, and demonstration to assure that the system architecture, design and implementation satisfies the intent of the customer requirements. May also assist, with direct supervision, in overall validation of the above.

Typical Education & Experience:
Degree and typical experience in engineering classification: Bachelor's and10 or more years' experience or a Master's degree with experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

Basic Skills:
• Experience working with a team of systems engineers or systems integrators
• Experience in software or systems testing

Preferred Skills:
• Systems Engineering experience
o Model Based Systems Engineering
• Agile Development experience
• Leadership experience

Required:
• Active US Security Clearance TS/SCI

Bachelor's and 10 or more years' experience or a Master's degree with experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

ACS Group (formerly 'Comforce')
 
Job Number: SystEngCA
Job Location: El Segundo, CA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer IV FL

Description:
Job Title: Systems Engineer IV

Number of Positions: 1

Remaining Positions: 1

This is a Hardware systems role, please do not submit candidates with Software systems experience.

Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **



** Selected candidates for Jupiter, FL roles must be onboarded through one of these approved background check providers: EIS, First Advantage, Sterling or Talentwise. See attachment for specific background check onboarding requirements **



** This is a Hardware Systems role, NOT Software systems **





Without appreciable direction and exercising considerable latitude in determining technical objectives and approaches to assignments, performs in a largely independent role for the Systems Engineering organization.
Typical responsibilities include: May plan, conduct, and provide technical Systems Engineering direction on projects or major phases of significant project assignment, coordinating the efforts of technical support staff in the performance of assigned projects.
Requires the use of advanced Systems Engineering techniques in management of requirements and risk for developing rocket propulsion systems.
Assesses the feasibility and soundness of proposed engineering evaluation tests, products or equipment when necessary data are insufficient or confirmation by testing is advisable.
Represents the organization in conferences to resolve important questions and to plan and coordinate work.
May direct, coordinate and review the work of a small staff of engineers and/or technicians; estimates personnel needs and schedules and assigns work to meet completion date. Or, as individual researcher or staff specialist may be assisted on projects by other engineers or technicians.
Develops solutions to complex problems which require the use of ingenuity and creativity.
Work is reviewed at extended intervals for desired results and achievement.
Contacts include interacting with customer personnel on technical matters often requiring coordinated activity across organizational lines.


-60% - Develops hardware and software requirements for rocket propulsion systems product development. Responsible for derivation, allocation, and documentation of requirements in a requirements database. Responsible for the development and maintenance of system, subsystem, and component specifications. Coordinates requirements and related specification change management with IPT members. Defines and coordinates requirements verification plans with integrated product team members, plans and manages compliance assessment and certification.



-15% - Performs functional analysis in support of requirements development effort. Supports and/or coordinates system trade studies. Coordinates selection of optimized concept baselines through benefit/cost trades in support of definition of system architecture and objectives.



-15% - Coordinates project risk assessment and management and prepares and reports results on mitigation plans.



-10% - Communicates results in oral presentations and written communication.

Skills:
Required:

-DOORS

-DOORS NG

-Jazz Team Server tool knowledge

-Systems requirements management and flowdown/decomposition for subsystems and components



Desired:

-Hardware requirements development for complex systems including propellant valves/electro-mechanical actuators



Keywords:

-DOORS

-Requirements Management

-Requirements Development

Education:
BS Engineering

Skills:
Required
DOORS SOFTWAREREQUIREMENTS MANAGEMENTAEROSPACE ENGINEERING

State/Province: Florida
City/Town: Jupiter

Start Date: 03/19/2018 Hours Per Week: 40.00
Est. End Date: 09/16/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7705172
Job Location: Jupiter, FL
Rate: 39/hr max
Duration: 6 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
TEMP Senior Systems Safety Engineer CA

Description:
15002

Title TEMP Senior Systems Safety Engineer
Job Summary General Atomics Aeronautical Systems, Inc. (GA-ASI), an affiliate of General Atomics, is a world leader in proven, reliable remotely piloted aircraft and tactical reconnaissance radars, as well as advanced high-resolution surveillance systems.

We recognize and appreciate the value and contributions of individuals with diverse backgrounds and experiences and welcome all qualified individuals to apply.

DUTIES AND RESPONSIBILITIES: •Support safety analysis of our Unmanned Aircraft System (UAS). The multiple programs in development support the US Army and US Air Force, along with many other US and Foreign customers.
• In this role, the successful candidate will work on an integrated Reliability and Safety team to support both customer risk acceptance, and airworthiness requirements.
• Responsibilities include, but are not limited to the following:
• Specific technical experience and knowledge should include ability to familiarize yourself with MIL-STD-882, operation and processes of System Safety Working Groups, and other related milestones such as PDR’s and CDR’s.
•Development of a System Safety Program Plan, Preliminary Hazard Analysis, Functional Hazard Analysis, System Safety Analysis / Safety Assessment Report, clear and concise system safety requirements, and support of the Hazard Tracking System.
•Understands the methods of identifying and categorizing Safety-Significant (safety-critical and safety-related) functions and their affects within the hardware, software, and human interfaces of the design architecture.
•Perform Fault Tree Analyses (Relex experience a plus).
•The ability to learn multiple aircraft subsystems to become an expert on how the systems as work as a whole.
•Provide human factors technical expertise on topics such as advanced user-interface technology development or the role of human users in automated or autonomous sub-systems in advanced vehicle systems.
•Analyze complex systems to determine potential for further development, production, interoperability, compatibility, or usefulness in a particular area, such as aviation.
•Advocate for end users in collaboration with other professionals including engineers, designers, managers, or customers.
•Conduct interviews or surveys of users or customers to collect information on topics such as requirements, needs, fatigue, ergonomics, or interfaces.
•Prepare reports or presentations summarizing results or conclusions of human factors engineering or ergonomics activities, such as testing, investigation, or validation.
•Perform functional, task, or anthropometric analysis, using tools such as checklists, surveys, videotaping or force measurement.
•Support Reliability & Maintainability analyses as required.
Job Qualifications

•Typically requires a bachelor’s degree, master’s degree or PhD in engineering or a related technical discipline from an accredited institution and progressive engineering experience as follows; six or more years of experience with a bachelor’s degree, four or more years of experience with a master’s degree, or two or more years with a PhD.
•Defense acquisition experience and knowledge a plus.
•Experience with Unmanned Vehicles systems a plus.
•Develop and present technical presentations.
•Must have a thorough understanding of engineering concepts, principles, codes, and theory; experience demonstrating a broad application of those concepts; and, expanding knowledge of principles, concepts, theory, and practices in related technical specialties.
•Must possess the ability to develop and communicate new concepts; apply them accurately throughout an evolving environment; organize, schedule, and coordinate work phases; and, determine the appropriate approach at the task level or, with assistance, at the project level to provide solutions to a range of complex problems.
•Must have strong communication, computer, documentation, presentation, and interpersonal skills, ability to work independently and as part of a team; able to perform complex tasks in one or more engineering areas; capable of representing the organization as a prime technical contact and, lead a team of moderately experienced professional employees on single component projects.
•Able to work extended hours as required.
•US Citizenship required.
•May be required to obtain and maintain a security clearance.



Qualifications Essential Qualifications Typically requires a bachelors degree, masters degree or PhD in engineering or a related technical discipline from an accredited institution and progressive engineering experience as follows; six or more years of experience with a bachelors degree, four or more years of experience with a masters degree, or two or more years with a PhD. May substitute equivalent engineering experience in lieu of education. Must have a thorough understanding of engineering concepts, principles, codes, and theory; experience demonstrating a broad application of those concepts; and, expanding knowledge of principles, concepts, theory, and practices in related technical specialties. Must possess the ability to develop and communicate new concepts; apply them accurately throughout an evolving environment; organize, schedule, and coordinate work phases; and, determine the appropriate approach at the task level or, with assistance, at the project level to provide solutions to a range of complex problems. Must have strong communication, computer, documentation, presentation, and interpersonal skills, ability to work independently and as part of a team; able to perform complex tasks in one or more engineering areas; capable of representing the organization as a prime technical contact and, lead a team of moderately experienced professional employees on single component projects. Able to work extended hours as required. A Professional Engineering License and original work published in professional engineering journals are desirable.

City San Diego
State California
Travel Percentage Required 0% - 25%
Clearance Required? Desired
Work Schedule Rule 9/80
Temp Assignment Duration (# of Days) 365
 
Job Number: JE-15002
Job Location: San Diego, CA
Duration: 12 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
TEMP Software Developer / DO-178B CA

Description:
12971

Title TEMP Software Developer
Job Summary General Atomics Aeronautical Systems, Inc. (GA-ASI), an affiliate of General Atomics, is a world leader in proven, reliable remotely piloted aircraft and tactical reconnaissance radars, as well as advanced high-resolution surveillance systems.

We recognize and appreciate the value and contributions of individuals with diverse backgrounds and experiences and welcome all qualified individuals to apply.

DUTIES & RESPONSIBILITIES:•Design and Develop autopilot software for unmanned air vehicles from the requirements phase through field test.
•Focus is on real-time aircraft system/flight control using the C language.
•May occasionally be required to support flight/ground testing of software at the flight test facilities. Analyze flight data to investigate system behavior and anomalies. Perform peer review of other developer’s code and perform testing with UAV mockup in the Systems Integration Lab.
•Programming in both Linux and Windows environments.
•'C' programming capability and verbal/written communication.
•Ability to work under general supervision and interface effectively with other engineers of various disciplines, including flight controls design engineers.
•Interpret, debug and modify complex legacy software following GA process and coding standards.
•Developing software in a CMMI or DO-178 structured environment.


Additional Qualifications

Strong Knowledge and background with closed loop controls and how they work
Good knowledge of transfer functions
DO-178B
MATLAB experience a plus
Very strong problem solving and attention to detail

Qualifications Essential Qualifications Typically requires a bachelors or masters degree in computer science, information systems or related discipline and two or more years progressive software development experience with a bachelors degree. May substitute equivalent experience in lieu of education. Must have a general understanding of software development concepts, principles, and theory and demonstrate the ability to follow and apply the use of programming and analysis concepts. Must possess the ability to understand new concepts quickly and apply them accurately throughout an evolving environment and organize work assignments to meet established timetables. Good communication, computer and interpersonal skills are required to enable an effective interface with other professionals, to produce appropriate documentation, and to present results to a internal audience. The ability to work independently and as part of a team is essential. Must be able to work extended hours as required.
City San Diego
State California
Travel Percentage Required 0% - 25%
Clearance Required? Desired
Work Schedule Rule 9/80
Temp Assignment Duration (# of Days) 365
 
Job Number: JE-12971
Job Location: San Diego, CA
Per Diem: no
Duration: 12 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
TEMP Software Developer CA

Description:
14887

Title TEMP Software Developer

Job Summary General Atomics Aeronautical Systems, Inc. (GA-ASI), an affiliate of General Atomics, is a world leader in proven, reliable remotely piloted aircraft and tactical reconnaissance radars, as well as advanced high-resolution surveillance systems.

We recognize and appreciate the value and contributions of individuals with diverse backgrounds and experiences and welcome all qualified individuals to apply.

DUTIES AND RESPONSIBILITIES:•Determine user requirements and specifications and plan for software development within the broader organizational scope. Software development includes end-user, system level, and data management applications,
•Formulate detailed plans for the implementation of software solutions. In addition to program design this includes determining language, platform, and resource requirements.
•Implementation of design including coding, testing, and documentation.
•Deployment of applications across the enterprise including cross- platform compliance and insuring availability of necessary resources.
•Code maintenance including debugging and updating to keep pace with the evolving environment.
•Assist in planning for future applications based on new developments in computer technology.
•Communicate with the software developer group, with users, and with management as well as with the wider community through the publishing and presentation of technical papers.
•Maintain the strict confidentiality of sensitive information.
•Perform other duties as assigned.
•Responsible for observing all laws, regulations and other applicable obligations wherever and whenever business is conducted on behalf of the Company.
•Expected to work in a safe manner in accordance with established operating procedures and practices.

Additional Qualifications:
Development of Software Requirements Specification (SRS), Software Design Description (SDD), Software Test Description (STD) and other pertinent software artifacts.
Experience with Model Based Design (e.g., SCADE, MATLAB/Simulink) highly desired
Programming languages such as C, C++, Python.



Qualifications Essential Qualifications Typically requires a bachelors or masters degree in computer science, information systems or related discipline and two or more years progressive software development experience with a bachelors degree. May substitute equivalent experience in lieu of education. Must have a general understanding of software development concepts, principles, and theory and demonstrate the ability to follow and apply the use of programming and analysis concepts. Must possess the ability to understand new concepts quickly and apply them accurately throughout an evolving environment and organize work assignments to meet established timetables. Good communication, computer and interpersonal skills are required to enable an effective interface with other professionals, to produce appropriate documentation, and to present results to a internal audience. The ability to work independently and as part of a team is essential. Must be able to work extended hours as required.

City San Diego
State California
Travel Percentage Required 0% - 25%
Clearance Required? Desired
Work Schedule Rule 9/80
Temp Assignment Duration (# of Days) 365
 
Job Number: JE-14887
Job Location: San Diego, CA
Duration: 6 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
TEMP Software Developer CA

Description:
14751
San Diego, CA
50/hr max

Title TEMP Software Developer
Job Summary General Atomics Aeronautical Systems, Inc. (GA-ASI), an affiliate of General Atomics, is a world leader in proven, reliable remotely piloted aircraft and tactical reconnaissance radars, as well as advanced high-resolution surveillance systems.

We recognize and appreciate the value and contributions of individuals with diverse backgrounds and experiences and welcome all qualified individuals to apply.

DUTIES & RESPONSIBILITIES: •In this role, the successful candidate must have advanced conceptual understanding of software development concepts, theory, and operations and have applied that knowledge in the implementation of new principles and concepts.
•Candidate will work write embedded C++ applications in a Linux environment.
•Chosen candidate will work on both legacy and new embedded code bases.
•Candidate will work in a multi-disciplined environment, designing, implementing, and debugging software that interfaces with FPGAs, GPGPUs and other hardware components utilizing both COTS and custom boards.
•The candidate must be a self-starter that is motivated to learn and apply new technical concepts quickly.

*Job Qualifications

•Typically requires a Bachelors degree or Masters degree in engineering or a related technical discipline from an accredited institution and 5 or more years of experience with a Bachelors degree, 3 or more years of experience with a Masters degree.
•The candidate must have the ability to understand and apply new technical concepts quickly.
•The candidate must be a strong oral and written communicator. The candidate must demonstrate the ability to work well in teams.
•The candidate must be proficient in C++ coding in embedded systems, and be able to provide examples of completed projects.
•It is desirable, but not required for the Candidate to have experience with real-time systems such as RT Linux, Free RTOS, or VxWorks.
•It is desirable for the candidate to have experience in signal processing code development, system integration, and data analysis.


Qualifications Essential Qualifications Typically requires a bachelors degree, masters degree or PhD in computer science, information systems or a related discipline and progressive software development experience as follows; four or more years of experience with a bachelors degree or two or more years of experience with a masters degree. May substitute equivalent experience in lieu of education. Must have a complete understanding of software development concepts, principles, and theory and demonstrate complete understanding and application of programming and analysis concepts. Must possess the ability to understand new concepts quickly and apply them accurately throughout an evolving environment. Ability to organize, schedule, and coordinate work phases and, determine the appropriate approach at the task level or, with assistance, at the project level and to provide solutions to a range of complex problems. Must have strong communication, computer, documentation, presentation, and interpersonal skills, ability to work independently and as part of a team; and, lead a team of less experienced professional employees on semi-routine tasks. Able to work extended hours as required.

City San Diego
State California
Travel Percentage Required None
Clearance Required? Desired
Work Schedule Rule 9/80
Temp Assignment Duration (# of Days) 180
 
Job Number: JE-14751
Job Location: San Diego, CA
Rate: 50hr max
Per Diem: no
Duration: 6 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technical Writer

Description:
Sr. Technical Writer should have extensive experience developing new and making revisions to Instructions for Continued Airworthiness (ICA) procedures. Experience should include, but not limited to, on-aircraft field level maintenance and inspection procedures, wire diagram and/or standard wire practice manual content from supplier and engineering data. Experience with ENOVIA SmarTeam or similar Product Lifecycle Management (PLM) database products strong desire. Familiarization with CATIA three-dimensional (3D) modeling and two-dimensional (2D) CAD standards, format, and 3D/2D software products

Bachelor’s degree or equivalent experience in the authoring of technical publications. Four (4) years of Technical Publications writing experience. Advanced knowledge of all aircraft systems methodology.
 
Job Location: Savanah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technical Writer Sr

Description:
Technical Writer Sr.

Location: Savannah, GA
Pay Rate: $34/hr
Duration: Long Term W2 Contract
Shift: First

Unique Skills:
This position requires extra expertise with avionics/electrical systems and troubleshooting.

Education and Experience Requirements:
-Bachelor's Degree or equivalent experience in the authoring of technical publications required.
-Four (4) years Technical Publications writing experience.
-Three (3) years of Standard Graphic Markup Language (SGML) or SGML-related software applications experience required.

Other Requirements:
1. At least three (3) years of Standard Graphic Markup Language (SGML) or SGML-related software applications.
2. Strong technical writing and communication skills are required.
3. Ability to read and interpret blueprint and Engineering Orders.
4. Must have a thorough knowledge of aircraft tools, test equipment, vendor coding, parts nomenclature, maintenance procedures, and of aircraft equipment and maintenance.

Position Purpose:
Responsible (either individually or with other team members) for the writing of major portions of technical publications. Supports the complete workflow process to ensure successful completion of each revision cycle and distribution of technical publications. Complies with established quality processes to ensure accuracy, ease of use and timely delivery of each revision cycle content.

Principle Duties and Responsibilities/Essential Functions:
1. Write technical publications content as directed.
2. Conduct reviews and analyze technical documents to gain a thorough understanding of how complex systems operate and how they are to be integrated into technical manuals to provide the end user with the level of text and graphics to support the efficient return to service of the aircraft system.
3. Consult with internal, external customers and Engineering to create/revise technical manuals to support the department/corporate operating priorities.
4. Provide input to management on new processes or technology for integration into the technical publications business model.
5. Assist in developing solutions for overcoming the technology/technical issues introduced by outside suppliers for incorporation into existing manuals.
6. Work with management, other departments, and team members in the development of specific project data.
7. Provide liaison with Completion Center, Technical Operations, Production and/or Completion Engineering, Service Center to obtain the necessary approval for technical information prior to its release to customers.
8. Participate with publications team to ensure all internal department workflows and business processes are followed for issues relating to producing and delivering technical publications and associated Computerized Maintenance Program (CMP) data.
9. Work with internal/external customers in the development of specific project requirements of source data to ensure a seamless incorporation of new data in the publications environment. Perform other duties as assigned.
 
Job Number: 8660
Job Location: Savannah, GA
Rate: 34.00
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Test & Evaluation Engineer III - (SC)

Description:
Supports the development and verification of methods in support 737 MAX inlet assembly. Develops detailed test procedures, and configuration definition, needed to perform the measurement test and minimize risk within the constraints of the test plan. Develops solutions to system problems of limited scope and impact. Designs test hardware, software and systems to achieve requirements. Uses analytical tools to verify the design. Analyzes, processes, and formats data to customer requirements. Reviews data, including off-nominal data, for accuracy, quality and/or fidelity prior to delivery to customer. Prepares and publishes test reports to document test results and satisfy requirements. Presents test results internally. Archives data and reports. Trains others. Works under general direction.

This assignment is in support of 737 MAX inlet assembly. This engineering will establish measurement plans to monitor hardware variation throughout the assembly process, measure product to create 3D shim profile shapes, and verify end product geometric profile. This assignment requires an expert knowledge of the leica 960 T-scan and associated software platforms, such as Spatial Analyzer, Polyworks and CATIA. This assignment requires the ability to create automated scripting to post process the scan data.

Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.

ACS Group (formerly 'Comforce')
 
Job Number: Test&EvalSC
Job Location: Ladson, SC
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Test & Evaluation Engineer IV - (CA)

Description:
Develops and documents standardized test methods and processes to ensure repeatability and productivity. Leads the development of test procedures. Applies lessons learned to the improvement of test procedures. Designs calibration system/test fixtures. Develops data processing tools and algorithms. Generates calibration procedures and software. Guides others in the design of test hardware, software and systems to achieve test requirements. Oversees debriefing of the test team. Leads the analysis, processing and formatting of data to customer requirements. Approves test data prior to delivery to customer. Formulates expectations for test data based on historical data. Performs functions as required to ensure calibration system readiness and data validity. Trains others.

Knowledge of hydraulics. Troubleshoot pneumatic, hydraulic and electrical systems.

Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

ACS Group (formery 'Comforce')
 
Job Number: Test&EvalIVCA
Job Location: Huntington Beach, CA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 10+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Test Engineer

Description:
• Strong C/C++ programming experience
• Experience with VxWorks, Linux
• Experience with Visual Studio or equivalent
• Understanding of test architectures and software abstractions • Strong communications skills and ability to work independently

• Programming language familiarity preferred: C#, Visual Basic, Windows, LINUX shells, MATLAB
• Familiarity with embedded engineering applications
• Familiarity with design and performance testing of RF, Digital, Optical, or Analog circuits/assemblies
• Familiarity with digital logic design and implementation
• Capable of providing Hardware Support utilizing: Spectrum Analyzers, Network/Signal Analyzers, Signal Generators, RF Power Meters, RF Attenuators/Switches/Couplers, Function/Waveform Generators, Data Acquisition and Control Systems, DMMs, High Voltage P/Ss, Analog I/O, Digital I/O, Word/Excel Automation
• Related Support: Software Driver Development, Hardware Driver Development, Test Method Development, Test Plan/Procedure/Requirements Development, Schematic Interpretation, FPGA Programming
 
Job Number: 2638
Job Location: VA
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 9 mos+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Test Engineer

Description:


Description:

ELECTRICAL POWERTRAIN SYSTEM CONTROLS TEST ENGINEER

Automotive development and testing of electronic control units in the following areas:
- Engine controls.
- Powertrain controls -- 4WD systems, engine mount control, electronic oil pumps, & hybrid electric vehicle support systems.
- Transmission & shift-by-wire controls.

The responsibilities for each area would include writing hardware and software specifications, performing confirmation testing on the actual car and simulator, troubleshooting and fixing related problems, writing and presenting reports, working with component suppliers and other departments to resolve technical issues, researching new technologies and market trends, and making proposals for future products. Other responsibilities also include researching new technologies and market trends and making proposals for future products.

Qualifications

A Bachelor’s degree in Electrical Engineering, Computer Engineering, or Software Engineering and a minimum of 1 year experience or equivalent combination of education and experience required. Strong knowledge of electrical hardware and software development required. Interest in the automotive field and experience in the use of electronic measuring equipment and electrical troubleshooting experience desired. Proficient PC Skills (Excel, Word, PowerPoint and other technical software) and excellent communication/interpersonal skills required. Ability to travel and work overtime may be required.
 
Job Number: NSR10012TE
Job Location: Columbus Area, OH
Rate: Open
Per Diem: No
Overtime: Straight
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: NSR GROUP
Attention: Mariko Akiyama
Address: 655 METRO PL S STE 600-44
City, State: DUBLIN, OH 43017
Phone: 614/798-0671
Fax Phone: 614/439-4932
Website: www.nextsr.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Test Engineer

Description:


Description:

ELECTRICAL POWERTRAIN SYSTEM CONTROLS TEST ENGINEER

Automotive development and testing of electronic control units in the following areas:
- Engine controls.
- Powertrain controls -- 4WD systems, engine mount control, electronic oil pumps, & hybrid electric vehicle support systems.
- Transmission & shift-by-wire controls.

The responsibilities for each area would include writing hardware and software specifications, performing confirmation testing on the actual car and simulator, troubleshooting and fixing related problems, writing and presenting reports, working with component suppliers and other departments to resolve technical issues, researching new technologies and market trends, and making proposals for future products. Other responsibilities also include researching new technologies and market trends and making proposals for future products.

Qualifications

A Bachelor’s degree in Electrical Engineering, Computer Engineering, or Software Engineering and a minimum of 1 year experience or equivalent combination of education and experience required. Strong knowledge of electrical hardware and software development required. Interest in the automotive field and experience in the use of electronic measuring equipment and electrical troubleshooting experience desired. Proficient PC Skills (Excel, Word, PowerPoint and other technical software) and excellent communication/interpersonal skills required. Ability to travel and work overtime may be required.
 
Job Number: NSR10011TE
Job Location: Columbus Area, OH
Rate: Open
Per Diem: No
Overtime: Straight
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: NSR GROUP
Attention: Mariko Akiyama
Address: 655 METRO PL S STE 600-44
City, State: DUBLIN, OH 43017
Phone: 614/798-0671
Fax Phone: 614/439-4932
Website: www.nextsr.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Test Engineer (Hands-on)

Description:
Test Engineer (Hands-on)

Location: Burbank, CA
Pay Rate: $28/hr - $33/hr
Duration: Temp to Hire
Shift: not specified

SUMMARY: Develops test procedures and coordinate efforts with other engineering departments to support flight development and qualification programs. Performs mechanical testing of individual components and assemblies to ensure conformance with established specifications.

ESSENTIAL FUNCTIONS: The duties are not limited to the following description:

1. Creates and coordinates overall test plans and assists in developing test procedures and reports which meet the customer’s program testing requirements.
2. Designs test fixtures and reconfigures test equipment in order to meet program goals.
3. Reads and interprets technical procedures and drawings to determine test objectives, set-up requirements, testing limits, and acceptance criteria.
4. Installs test fixtures and specimens to the test equipment.
5. Operates static and dynamic servo-hydraulic test machines and electro-dynamic shaker systems.
6. Completes paperwork associated with the test procedure, including filing test results either electronically or in a conventional filing system.
7. Reviews and analyzes test data to determine if it meets program requirements.
8. Recommends revisions to test method or work flow to optimize the process while maintaining test integrity in accordance with internal and external customer requirements.
9. Performs new technology research on state-of –the-art test systems and software to determine whether new equipment will provide the Company with a cost or technological advantage.
10. Provides test support and analyzes test fixtures, machines, and data to solve problems on test programs.
11. Performs routine cleaning and servo-hydraulic material test machines and electro-dynamic vibration shakers equipment maintenance. Troubleshoots and resolves issues with test equipment.
12. Prepares, generates and maintains Statistical Process Control (SPC) charts and data in order to monitor the production and testing processes.
13. All other duties as assigned.
14. Responsible for promoting and abiding by the HSE rules and policies.

PRIMARY TOOLS OR EQUIPMENT: Able to set-up and operate servo-hydraulic material test machines and electro-dynamic vibration shakers with both manual and computer controllers. Able to set-up and operate temperature and vacuum environmental chambers. Able to set-up and operate digital and analog meters and displays, spectrum analyzers, plotters, recorders, dial indicators, calculators, various manual and pneumatic hand tools and other equipment and tools typically found in the test lab. Able to use measurement tools such as calipers, dial indicators, micrometers, weigh scales, and machinist scales. Ability to use shop hand tools, pneumatic tools, lifting devices, and cranes.
Use of typical office equipment such as telephones, computers (Microsoft Excel and Word), copiers, printers, fax machines, e-mail, scanners, etc.

KNOWLEDGE AND SKILLS REQUIRED:

Education and/or Experience: Bachelor’s degree in Mechanical Engineering, Electrical Engineering, or Applied Mechanics. Two years test-related experience in the field of Aerospace or Applied Mechanics, one year basic electronics and one year in machine design, or equivalent experience.

Language Skills: Able to read and comprehend instructions, correspondence, and memos. Able to effectively communicate verbally and in writing information to customers, clients, and employees.

Problem Solving: Able to apply logic, segregating the facts, make a decision, and carry out task.

Computer Skills: Working knowledge of Windows and word processing, spreadsheets and databases. Proficient in MS Office (Word, PowerPoint, Excel, Outlook).

Other Teamwork or Skills: Ability to participate as a team member. Knowledge of industry best practice in Configuration Management practices. Have an understanding of software and machine maintenance. Exercise excellent organization, communication and interpersonal skills.

ABILITIES REQUIRED:

Physical Requirements: While performing the duties of this job, the employee is frequently required to sit, stand, walk, use hands to finger, handle or feel objects and reach with hands and arms. The employee is occasionally required to stoop, kneel, crouch and lift light to moderate weighing items. Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and the ability to adjust focus from close items to items at a distance.
 
Job Number: 8475
Job Location: Burbank, CA
Rate: 28-33
Per Diem: Split Possible
Overtime: Possible
Duration: Temp to Hire
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Test Equipment Engineer

Description:
Essential Job Functions:

QuEST Global Outsourcing is in search of a Tests Equipment Engineer for Sensors and Integrated Systems.



· Detailed working knowledge of General Test Equipment.

· Utilize microelectronic, electronic, optical, electro-optical, mechanical, or electromechanical equipment, including computers.

· Perform advanced troubleshooting, calibration or modification of hardware, fixtures, and software.

· Apply technical expertise in the evaluation, development, maintenance and use of complex products, devices, tests, or procedures under constantly changing conditions where moderate ingenuity and judgments are required.

· Structure modifications to programs w/ Labview or other SW packages/programs.

· Design simple circuits, fixtures, or mechanical parts.

· Provide technical solutions to engineering.

· Participate on safety initiatives.

.

Secondary Job Functions:

At QuEST, we often challenge our team members to temporarily work outside the scope of their primary job functions to broaden their skills and help the organization. Some of these roles, tasks, and opportunities include:

· Execution within multiple services

· Project Management: Execution and Support

· Technical Leadership and Technical Reviews

· Develop work instructions to ensure repeatability

· Personnel Management

· Onboarding and Professional Development: collaborate and mentor QuEST Team Members

· Cross-functional teams

· Quality Management and Continuous Improvement



Specialized Knowledge / Skills

· Must have experience troubleshooting and the ability to interpret schematics.

· Must have good mechanical and/or electronic (analog and digital) repair capabilities.

· Must be highly motivated and dedicated to exceeding customer expectations.

· Associates/Technical degree and/or equivalent proven experience.

· Critical thinker & able to offer Value Added Solutions.

· 5 - 7 years experience.

· Proficient with standard electrical lab test equipment.

· Basic knowledge of MS Office, and preferred experience in Labview


Education, Training, and Experience

· Electrical/Electronic BSC or equivalent work experience

· Detailed working knowledge of design principals and familiarity with design tools.

· Working knowledge of ESD principles and application.

· Good skills working in the Microsoft Office environment (Excel/Word/Outlook etc).

· Good hand skills and experience with multiple electronic test tools..



Personal Work Attributes

· Self-motivated to ensure accountability, disciplined to improve processes, passionate about engineering, and organized to track many work streams

· Excellent verbal and written communication skills to be able to communicate effectively with numerous personality types and superb customer-facing skills

· Great interpersonal and networking skills



Physical Requirements & Work Environment:

· Mostly Office Environments. Occasional Shop Floor involvement

· Substantial amounts of telephone and computer work.

· Heavily Regulated Industries with strict adherence to procedures.

· Flexibility to meet business deadlines by staying late or arriving early.

· Typical 8 hour days plus lunch / 40 hour weeks

· Ability to use personal transportation to visit customer locations.



The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
 
Job Number: TEE-1
Job Location: Vergennes, VT
Rate: Open
Input Date: 11/14/2020
Firm Name: QUEST GLOBAL SERVICES
Attention: Venkatesh Rao
Address: 111 FOUNDERS PLAZA STE 601
City, State: EAST HARTFORD, CT 06108
Phone: 860/726-7025
Website: www.quest-global.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Thermal Engineer

Description:
Must have an active clearance to start

Experience with CAD modeling using PTC CREO, FORTRAN programming, CFD software (Star CCM+, FlowEFD), and Siemens NX CAD and Thermal/Flow software suite. Experience with MATLAB and Mathcad.
Creativity/innovation to solve issues related to thermal design performance of any aspect of thermal systems. Experience developing and analyzing in thermal design of thermal management systems. Experience calculating internal and external convection coefficients of simple and complex geometries and being able to research literature when necessary.
Experience writing environmental and component specifications, and system/subsystem/component test plans.
 
Job Number: 41056
Job Location: FL
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Designer III & IV - Everett, WA

Description:
SEVERAL OPENINGS IN THE SEATTLE/EVERETT, WA AREA.

CATIA V5

Investigates and develops complex equipment and tooling concepts and specifications to satisfy aerospace product design and build requirements. Participates in design reviews, collects design requirements, creates and revises drawings and models, researches the application of robotics, automation and new technology to support the build plan. Creates off-load packages, specifications, purchase requests and usage instructions for equipment and tooling. Checks designs for compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements. Develops and documents equipment and tooling inspection and usage instructions, preventative maintenance plans, and user training. Provides technical support for engineering changes and discrepancies by investigating problems and analyzing data to identify solutions. Maintains hardware and software configuration. Assesses and makes recommendations for disposition of equipment and tooling.

AA degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience.

CATIA V5
 
Job Number: ToolDesWA
Job Location: Everett, WA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 10+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Designers

Description:
Investigates and develops complex equipment and tooling concepts and specifications to satisfy aerospace product design and build requirements. Participates in design reviews, collects design requirements, creates and revises drawings and models, researches the application of robotics, automation and new technology to support the build plan. Creates off-load packages, specifications, purchase requests and usage instructions for equipment and tooling. Checks designs for compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements. Develops and documents equipment and tooling inspection and usage instructions, preventative maintenance plans, and user training. Provides technical support for engineering changes and discrepancies by investigating problems and analyzing data to identify solutions. Maintains hardware and software configuration. Assesses and makes recommendations for disposition of equipment and tooling.
Please call 206-763-2840 or 800-678-8644.
 
Job Number: 1810082333
Job Location: Everett, WA
Rate: TBD
Per Diem: Split
Overtime: possible
Duration: 10 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Recruiter
Address: TIME SQUARE 660 BUILDING
660 SW 39TH ST STE 215

City, State: RENTON, WA 98057
Phone: 206/763-2840
800 Phone: 800/678-8644
Fax Phone: 206/763-3283
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Trajectory Engineer

Description:
Trajectory Engineer

Location: Centennial, CO
Pay Rate: DOE
Duration: 1 year W2 contract
Shift: First, 9/80, exempt OT
**MUST be a U.S. CITIZEN; NO DUAL CITIZENSHIP**

Job Description:
-Responsible for design, development, and verification of trajectory simulations which merge launch vehicle constraints and capabilities with the spacecraft customer requirements and mission objectives.
-Provide detailed simulation capabilities of the entire launch vehicle and upper stage phases of flight to support internal and external customer needs and analyses.
-Combine information and constraints from numerous other technical functions into a cohesive mission design that meets performance, accuracy, environmental, structural, and operational requirements.
-Needs familiarity with trajectory optimization schemes, computer programming skills (Linux and Perl experience preferred), and a minimum of 3 years’ experience in trajectory work.

Requirements:
- Bachelors degree or higher
-Needs familiarity with trajectory optimization schemes
-Also needs computer programming skills (Linux and Perl experience preferred), a strong systems engineering mindset and a minimum of 3 years experience in trajectory/GN&C work.
 
Job Number: 8638
Job Location: Centennial, CO
Rate: DOE
Per Diem: Split Possible
Overtime: Exempt
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Various Positions- EBU/Nacelle Experience

Description:
Design Engineer

Project Engineer

Manufacturing Engineer

Required:
Must have experience with Nacelles and Engine Build-Up (EBU) background and background in the bid process.


Description:
Applies extensive knowledge of principles, theories, concepts and industry practices to plan, direct, and coordinate the engineering design, integration, analysis and certification of company products and processes for manufacturing of complete aircraft parts, components, subsystems and complete systems for operational aircraft.

Evaluates and approves design changes and drawing releases. Assigns project personnel to specific aspects or phases of project such as analysis, development, or design. Establishes milestones and monitors adherence to master plans and schedules. Identifies program problems and obtains solutions such as allocation of resources or changing contract specifications and technical solutions. Coordinates design, production, testing, and related activities.

JOB QUALIFICATIONS:
Bachelor degree in an appropriate discipline from an accredited four-year college or university and five (5) or more years related experience and/or training. A combination of education and experience may be substituted for the degree requirement. Standard Job Requirements: • Competent in the use of standard software applications such as Microsoft Word and Excel and operate standard office equipment.

Skills:
Experience with composite design, manufacture processes and certification
Provide project management and schedule planning
Technical interface for customers (internal and external)
Must have a background in mechanical system design, integration, test and manufacturing. engine build-up (EBU) would be a huge plus
Understand configuration control and change management
Experience with, or a part of customer bid process
CATIA knowledge and experience
Assist with production troubleshooting and improvements

The Structures Company is an AA/EOE.
 
Job Location: OK
Duration: 6 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

Back to Advanced Job Search