Job Search Results103 listings were found that matched your search words: Keywords: ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2026/04/12 Sunday 03:50AM Pacific Time by ContractJobHunter. )Listings 1 - 25 |
|||
| Go To My Job Tracker | |||
MP&P Engineer 4 - NDE/NDT
**Must be able to obtain a Secret Clearance. US Citizenship Required.**
Defines requirements for materials, parts and processes used in the manufacture of products. Leads production of specifications and other documents to manage the deployment of materials, parts and processes. Maintains compliance with contractual and regulatory obligations. Promotes standardization across business activities. Evaluates emerging technologies for potential application to business needs. Leads development and qualification of new materials, parts and processes to meet requirements. Integrates new technologies as appropriate. Manages test and audit programs to qualify suppliers to applicable requirements. Conducts complex analysis to determine reasons for failures of materials, parts or processes. Implements corrective and preventive actions. Leads design, development and qualification of sophisticated computer and production systems to satisfy user requirements. Works under minimal supervision. Work statement is a non-managerial role, non-leadership role.
Scope of work/Position Responsibilities:
• Apply nondestructive evaluation (NDE) methods/approaches, such as acoustic, electromagnetic, thermal, optical and radiologic principles, in developing new and novel methods/approaches to address affordability and supportability objectives
• Define requirements for tools, equipment, materials, parts and processes used in the engineering design, manufacture and maintenance of products and approve their use
• Lead development of specifications and other documents to manage the deployment of tools, equipment, materials, parts and processes
• Leads development, validation and qualification of new tools, equipment, materials, parts and processes to meet requirements
• Manages test and audit programs to qualify suppliers to applicable requirements
• Uses project management tools to meet cost, technical, and schedule requirements
• Ensure compliance with industry codes, standards, and customer requirements (ASNT, ASTM, AWS, ASME, ISO, etc.).
• Support audits, root cause analyses, and failure investigations as a subject matter expert.
• Supports the Team Lead and work statement, assist defining strategies and/or provides consultation.
Basic Qualifications (Required Skills/Experience):
• 5+ years of experience in engineering
• Excellent written and oral communication skills
• Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, physics or chemistry
Preferred Qualifications (Desired Skills/Experience):
• 5+ years of hands-on experience in NDE/NDT engineering in a regulated industry (e.g., aerospace, defense, energy).
• Experience with nondestructive evaluation processes (e.g., ultrasonic testing, radiography, eddy current testing, and penetrant inspection)
• Experience working in multi-discipline teams, a strong desire to work with technical and non-technical customers.
• Strong understanding of materials behavior, stress analysis, and fracture mechanics.
• Experience with project management tools
• Excellent time management skills to manage several simultaneous projects effectively and across various geographical locations.
• Active / Current Secret U.S. Security Clearance preferred but not required
Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.
Job Location: Berkeley, MO
Rate: TBD
Duration: 6 - months
Start Date: ASAP
Input Date: 01/08/2026
Last Updated: 04/11/2026
Address: 160 NW GILMAN BLVD STE 250
City, State: ISSAQUAH, WA 98027
Phone: 425/451-0051
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com
Systems Engineer 3 - 377328
**Secret Clearance Required to Start.**
100% onsite. Position can be in Colorado Springs, CO or Huntsville, AL.
Company’s Missile Defense National Team is seeking motivated and talented System Engineers in Colorado Springs, Colorado!
Missile Defense programs are part of the Ballistic Missile Defense System which defends the United States homeland and its regional allies all over the world. Be a part of our passionate and highly-motivated team who are excited to be on the forefront of defense of our nation.
Primary Responsibilities:
• Team member will work with other industry partners in the development and execution of a comprehensive assessment program supporting the C2BMC Element of the Ballistic Missile Defense System.
• Evaluates systems under various scenarios and architectures to determine and/or optimize overall system mission performance in a framework giving insight into performance that may be employed by Missile Defense Agency and Warfighters
• Performs various analyses to optimize total system of systems and/or system architecture
• Develops and maintains analysis tools of varied fidelity including modeling and simulation tools to predict performance against evolving threats of current and future missile defense systems
• Develops, maintains and identifies improvements for the planning, organization, implementation and monitoring of requirements management processes, tools, risk, issues, opportunity management and technology readiness assessment processes
• Defines, schedules, assigns, and executes tasks, and monitors completion to lead the monitoring of integration and checkout activities, receiving and evaluating of results of activities, and approving/disapproving of each by determining whether results meet the checkout requirements, so that integration activities can proceed
• Supporting the subject matter experts for integration and test domains, system engineering system performance/ domains, system-specific issues, processes, tools, and regulations
• Support efforts to solve complex missile defense problems
• Utilization of MBSE tools such as CAMEO or DOORS, System Architect and mathematical modeling and simulation to provide thought leadership and lead trade studies in assigned areas
• Requirements and architecture development in support of MDS systems
• Drive the system engineering integration and test or system analysis approach
• Develop, select, tailor and deploy integration and test processes, tools and metrics
• Execute and document integration and test activities and events
• Develop, define efficiencies and improvements to tools to improve team productivity
• Perform system analysis trade studies to define technical concepts and solutions
• This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. (Colorado Springs, CO.)
• This position may require the ability to obtain access to an MDA facility. Access to the facility requires a background investigation by U.S. government authorities.
• This position requires candidate acceptance by industry partner resource control board.
• This position requires an active Secret U.S. Security Clearance. (A U.S. Security Clearance that has been active in the past 24 months is considered active.)
Basic Qualifications (Required Skills/Experience):
• Bachelor or Master of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.
• Experience using analytical, collaboration, communication and organizational skills
• Minimum of 1 year of in system engineering (e.g. Systems, Design, Architecture, Integration, Requirements or Test)
Preferred Qualifications (Desired Skills/Experience):
• 3 or more years' related work experience or an equivalent combination of education and experience
• Ability to obtain a Top-Secret clearance or an active Top Secret clearance highly desired
• Growing understanding of DoD and missile defense command and control, battle management, architectures and communications system concepts, mission, and common system test and data analysis techniques
• Experience with verification of requirements
• Must have an understanding of System Engineering and iterative product development using Agile practices.
• Experience in developing capability assessments, assessment objectives and related assessment plans and procedures.
• Experience in scripting and automated test development is a plus.
• This position requires exposure to a broad range of personnel within MDA and its associated sub-elements.
• Experience using MATLAB, Python, JAVA, or similar language environment to develop analytical tools or perform numerical modeling of complex systems.
• Demonstrated experience performing systems analysis or performance analysis including system concept trade studies, operational analysis, requirements analysis, feasibility analysis, system performance measures of effectiveness analysis (incl. technical performance measures), discrimination methods and techniques definition, probability analysis, or vehicle analysis.
• Demonstrated experience modeling or simulating missile defense elements or systems in similar domains (air combat, air defense, intercept of ballistic targets, intercept of non-ballistic targets, space vehicles, sub-orbital mechanics, etc.)
• Experience with Agile Development processes is a plus
Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 5 or more years' related work (e.g. PhD, Master+3 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.
Job Location: CO Springs, CO
Rate: TBD
Duration: 12 - months
Start Date: ASAP
Input Date: 01/20/2026
Last Updated: 04/11/2026
Address: 160 NW GILMAN BLVD STE 250
City, State: ISSAQUAH, WA 98027
Phone: 425/451-0051
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com
Methods Process Analyst 3
**Must be able to obtain a Secret Clearance. US Citizenship Required.**
100% on-site.
Position is for 2nd Shift (2:30PM to 11:00PM)
The Company is seeking an Experienced Industrial Engineering Tech (or Methods Process) Analyst located in Berkeley, MO.
When you join our team of mission driven engineers, you’ll have the opportunity to be hands-on while driving solutions to difficult problems. As a member of the team, you will have the unique opportunity to support the fabrication and assembly for the next generation Air Force Trainer, bombers and tactical fighter aircraft, autonomous air vehicles, rotorcraft, advanced airborne sensors, space vehicles, satellites, weapons systems, the commercial fleet of single and twin aisle airplanes and much more.
Position Responsibilities:
· Applying standards to the new work instructions.
· Updating precedence networks supporting tooling and production schedule decisions. Creating and maintaining engineering performance metrics.
· Integrating modular tooling.
· Analyzes the current and future business environment and develops forecast, acquisition, and utilization plans to optimize resources in support of company initiatives and program business plans.
· Develops and maintains complex Business System factory definition to be used for manufacturing planning.
· Develops labor hour estimates for new or revised production and tooling work packages by utilizing labor standards, tool and production design drawing reviews, and Tool and Production Operations concurrence to support program business plans.
· Monitors performance.
· Participates in the development of integrated (e.g., crew cycling, learning curve, shift analysis, optimum/maximum crew size, tooling capacity) tool and production master schedules by developing tool and position plan/documents, tool downtimes, rate flow.
· Identifies and implements improvements to processes by analyzing current processes and utilizing established improvement methodologies to maximize the efficiency of equipment and personnel and to support company improvement initiatives.
· Analyzes changes to approved plans resulting from unplanned events.
· Assesses the impact of the changes that occur to cost, schedule, resources and delivery
· Develops modifications to existing plans and obtains approval for plan changes
· Participates in negotiations representing Production and Tooling Operations to support schedule commitments or statement of work impacts.
· Develops, implements, maintains, and statuses integrated shop operating plans to maximize the efficiency of equipment and personnel to reduce inventory and meet cost and schedule commitments.
· Develops and supports shop performance metrics by analyzing data in order to recommend plan of action for Production and Tooling Management.
Basic Qualifications (Required Skills and Experience):
• 6 or more years' related work experience or an equivalent combination of education and experience (e.g. Master+4 years' related work experience, 10 years' related work experience, etc.).
Education/experience typically acquired through advanced education (e.g. Bachelor) and typically 6 or more years' related work experience or an equivalent combination of education and experience (e.g. Master+4 years' related work experience, 10 years' related work experience, etc.).
Job Location: Berkeley, MO
Rate: TBD
Duration: 12 - months
Start Date: ASAP
Input Date: 01/23/2026
Last Updated: 04/11/2026
Address: 160 NW GILMAN BLVD STE 250
City, State: ISSAQUAH, WA 98027
Phone: 425/451-0051
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com
Design and Analysis Engineer 2 - 377262
**Must be able to obtain a Secret Clearance. US Citizenship Required.**
The Company is seeking a Design and Analysis Engineer located in Berkeley, MO. Positions are 100% on-site.
Position Responsibilities:
· Assists with the development and documentation of electronic and electrical system requirements.
· Develops or modifies basic hardware and software designs based on defined requirements.
· Performs system tests to verify operational and functional requirements.
· Supports fabrication technicians and suppliers’ questions during build and fabrication process
· Supports resolution of product integration issues and production anomalies.
· Supports hands-on troubleshooting of test racks
· Perform acceptance test procedures to demonstrate conformance to design and document results
· Develop and maintain scripts used to run test functions using C and C++
· Researches basic technologies for potential application to company business needs
This position requires the ability to obtain a US Security Clearance for which the US Government requires US Citizenship as a condition of employment.
· An interim and/or final U.S. Secret Clearance Post-Start is required.
Basic Qualifications (Required Skills/Experience):
· Bachelor of Science degree from an accredited course of study in engineering, engineering technology (includes manufacturing engineering technology), chemistry, physics, mathematics, data science, or computer science.
· 2+ years of work-related experience with a Bachelors OR Masters Degree
Preferred Qualifications (Desired Skills/Experience):
· Strong problem-solving and debugging skills
· Experience with laboratory test equipment (oscilloscopes, logic analyzers, etc.)
· Excellent written and verbal communication skills
· Strong foundation in C, C++, and python
· Siemens Capital Experience
Bachelor's degree and typically 2 or more years' experience in an engineering classification or a Master's degree with experience in an engineering classification. Required: Bachelor of Science degree from an accredited course of study in engineering, engineering technology (includes manufacturing engineering technology), chemistry, physics, mathematics, data science, or computer science.
Job Location: Berkeley, MO
Rate: TBD
Duration: 12 - months
Start Date: ASAP
Input Date: 11/18/2025
Last Updated: 04/11/2026
Address: 160 NW GILMAN BLVD STE 250
City, State: ISSAQUAH, WA 98027
Phone: 425/451-0051
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com
Information Technology Engineer 3
**Must be able to obtain a Secret Clearance. US Citizenship Required.**
Defines and validates requirements for new and revised hardware and software systems. Designs, develops and tests applications. Performs trade studies and other forms of analysis to formulate optimum solutions for users. Develops and deploys new or revised processes in support of new computing systems, including documentation and training. Supports the development of system integration strategies and architectures that promote use of common tools and processes. Facilitates integration of new technologies and the transition from legacy systems to support business requirements. Works under general direction with the senior manager.
Job Description
This a role for creating ADO teams & boards as well as being a centralized role for ensuring
Manages Team Structure & Naming conventions
Manages Area Path structure (this controls read/write privileges and acts as a core ontology for WBS)
Manages Common Iteration Path structure & standards (enables all dashboard widgets and standardized queries)
Teaching how to use ADO (people often request customization within ADO, we find requests for customization is typically rooted not knowing how to use OOTB functionality)
Oversee the ongoing maintenance of Azure DevOps projects, ensuring they operate smoothly.
Monitor project performance and implement necessary updates and optimizations.
Identify opportunities for AI integration within existing tools to enhance functionality.
Provide training and support to team members on Azure DevOps best practices and AI applications.
Address any issues that arise within the Azure DevOps environment.
Will be supporting various Company maintenance engineering organization programs over 6 sites, over 40 platforms (military and weapons)
Required Skill Sets:
Strong verbal and written communication skills, working with various levels of the organization so need to be comfortable working with different levels of the business.
Azure DevOps experience 3 + years
Preferred:
Software coding
Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.
Job Location: OK City, OK
Rate: TBD
Duration: 12 - months
Start Date: ASAP
Input Date: 02/24/2026
Last Updated: 04/11/2026
Address: 160 NW GILMAN BLVD STE 250
City, State: ISSAQUAH, WA 98027
Phone: 425/451-0051
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com
Space Survivability/Radiation Effects Engineer 5
**Secret Clearance Required to Start.**
Position is hybrid: 2 days a week onsite
We are seeking an Experienced Space Survivability/Radiation Effects Engineer to support natural and man-made radiation environment-related tasks through all satellite program phases. The successful candidate will interface with all technical disciplines in a team environment to trade factors such as survivability, cost, weight, and technical risk in arriving at the final design.
Primary Responsibilities
• Provide subject matter expertise in the technical area of nuclear radiation hardness on a large portfolio of space programs.
• Interface with program office representatives and system engineers representing other disciplines to ensure that radiation-related concerns are adequately addressed.
• Ensure that unit and system level designs appropriately consider radiation-related effects such as total dose, displacement damage, ELDRS, single event effects, internal charging, IEMP, SGEMP, and TREE.
• Perform and document unit and vehicle level analyses.
• Plan and conduct testing at the piecepart, unit, and vehicle levels to support design and verify compliance with radiation-related requirements.
• Interface with personnel at various radiation test facilities across the country to advocate for required test time.
Required Skills
• Ten years of experience in space environments/radiation effects.
• Experience in dose rate testing, total ionizing dose testing, displacement damage testing, and SEE testing of electronics
• Experience in prompt dose analysis of electronic units
• Experience working on government contracts with nuclear effects environment requirements
Preferred Skills:
• Experience with various pieces of test equipment such as oscilloscopes, spectrum analyzers, network analyzers
Bachelor's degree with 14 or more years' experience, Master's degreee with 12 or more years' experience or PhD with 9 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.
Job Location: El Segundo, CA
Rate: TBD
Duration: 12 - months
Start Date: ASAP
Input Date: 03/06/2026
Last Updated: 04/11/2026
Address: 160 NW GILMAN BLVD STE 250
City, State: ISSAQUAH, WA 98027
Phone: 425/451-0051
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com
Product Review Engineer 4 - 377236
The Production Engineering Organization is seeking Engineers to support commercial derivative airplane programs in San Antonio. We are looking for proactive individuals who can make quick engineering decisions and who want go beyond their desk and sit the factory for hands on engineering. This position requires excellent communication and collaboration skills, partnering closely with production personnel.
Must be available for all shifts - 4th shift rotating (1st, 2nd and 3rd) as well as weekend or daily overtime.
This position involves daily exposure to factory environment which includes stairs, trip hazards, high noise areas, chemical hazards (breathing and handling), and entering airplanes during their many stages of build.
RESPONSIBILITIES INCLUDE:
• Applies broad knowledge of Company design and/or engineering principles.
• Assesses and resolves product/process issues through the product lifecycle.
• Leads research of technical, operational and quality issues that cannot be resolved by customer and designs interim and final engineering solutions.
• Leads others to analyze, conduct root cause analysis and develop dispositions for design non-conformances.
• Develops and implements product/process improvements.
• Uses innovative approaches and unique applications to address complex nonconforming conditions and to detect deviations.
• Analyzes reported problems for potential safety issues; recommends and manages complex resolution. Leads develop of interim and final solutions.
• Provides design phase subject matter expertise by supporting Integrated Product Teams (IPT) and participating in design reviews.
• Represents the engineering community in the build through post production environment.
• Ensures supplier and build partner compliance with Company standards.
• Develops customer correspondence for continued safe operation and maintenance of equipment.
• Leads activities for on-site disabled product repair teams and accident investigation or support teams.
• Designs appropriate jacking and shoring schemes. Leads the design of interim structural repairs and conducts static strength analysis.
• Develops and leads non-destructive test procedures, tools and standards. Ensures supplier and build partner compliance with Company standards.
• Develops and implements technical training curriculum for internal or external customers.
BASIC QUALIFICATIONS (REQUIRED SKILLS/EXPERIENCE):
Engineering degree in any of the following majors: Aeronautical Engineering; Aerospace Engineering; Computer Engineering; Electrical Engineering; Mechanical Engineering; Systems Engineering, or Electrical Engineering Technology
5+ years of experience with the design of structural and electrical rework/repairs to restore the aircraft or system to original design capability.
Previous Commercial Material Review Board Experience, Company or Airlines
PREFERRED QUALIFICATIONS (DESIRED SKILLS/EXPERIENCE):
Experienced in reading/creating Engineering drawings, specifications, processes and design manuals.
Minimum of 8 years’ experience with any of the following: avionics systems troubleshooting, wire bundle installations, and aircraft electrical systems troubleshooting
Experienced in researching engineering designs in order to develop defect solutions to product/ process issues for production or simple technical in-service issues.
Minimum of 8 years’ experience of assisting with analyses, root cause analysis and drafting dispositions for non-conformances.
Minimum of 5 years’ experience collecting, researching, and evaluating issues for product/process improvement opportunities that may include recurrent product issues
Materials Review Board (MRB)/ Universal Product Review (UPR) approval authority certification.
Executive interior installation/design experience.
Modification & Repair experience on wide body aircraft.
Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 9 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+4 years' related work experience, Master+7 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.
Job Location: San Antonio, TX
Rate: TBD
Duration: 9 - months
Start Date: ASAP
Input Date: 11/04/2025
Last Updated: 04/11/2026
Address: 160 NW GILMAN BLVD STE 250
City, State: ISSAQUAH, WA 98027
Phone: 425/451-0051
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com
Project Engineer 4 - 377348
**Secret Clearance Required to Start.**
100% on-site.
Provides the Engineering leadership to a team representing multiple skill areas, which may include internal and external resources and customers. Develops statement of work (SOW) to satisfy research and development, ongoing and new business requirements. Works with customers and management to obtain approval. Responds to changes to SOW, assesses the impact and negotiates proposed changes to determine modifications to the deliverables, resources, costs and schedules. Leads project execution to complete the work statement. Identifies performance metrics. Plans, identifies, and coordinates resources required over the life of the project or program. Defines plans for risk mitigation and opportunity. Compares actual results to baseline plan to assess project performance, efficiencies, productivity and lessons learned. Provides technical, business and integration leadership for the development and execution of project or team plans. Works under minimal direction.
Basic Qualifications (Required Skills/Experience):
• Bachelor of Science degree from an accredited course of study in engineering, engineering technology (includes manufacturing engineering technology), chemistry, physics, mathematics, data science, or computer science
• 3+ years experience leading or managing multi-disciplinary engineering projects teams
Preferred Qualifications (Desired Skills/Experience):
• Project Management Professional Certification
• Experience with proposal development and contract negotiations
• Experience with Export Compliance or International programs
• Experience developing and tracking program plans/schedules and budgets for technical projects
• Project management experience in an engineering environment
• Experience in engineering project planning or project management
• Experience supporting weapons systems
• Experience working directly with government customers
• Experience collaborating across functions and organizations
Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 9 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+4 years' related work experience, Master+7 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.
Job Location: St. Charles, MO
Rate: TBD
Duration: 12 - months
Start Date: ASAP
Input Date: 02/11/2026
Last Updated: 04/11/2026
Address: 160 NW GILMAN BLVD STE 250
City, State: ISSAQUAH, WA 98027
Phone: 425/451-0051
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com
Technical Designer 3 - 377321
The Payloads Organization within Company is seeking Technical Designers (Interiors) for our Seats Integration Team (SIT) positions in Everett or Renton, WA. The SIT organization is responsible for the installation, integration, and certification of all passenger and attendant seats on commercial aircraft.
The selected candidate will have a statement of work that spans the product lifecycle: supporting customer configuration development, supplier engagement, validating and verifying design requirements, integrating business needs, and supporting the product through the production and certification processes. As a member of the team, you will need to interface with other members of SIT project teams, production system, program/product teams, management, and other technical staff to define and implement engineering solutions. You will be able to combine the expertise and resources of the interiors organization to certify and deliver the best interiors products within the industry.
Position Responsibilities:
• Leads the development and maintenance of engineering product definition
• Oversees the development of design layouts and the modification of existing designs to satisfy customer and production requirements
• Develops engineering product definition based upon Company requirements and parameters
• Coordinates development of engineering product definition with internal/external parties to ensure compliance with applicable standards, requirements and design parameters as well as product functionality
• Integrates work statement, work scope and work transfer packages with internal and external customers to requirements
• Oversees, directs and integrates the completion of product definition across internal and external business partners and products to provide a functional end-product
• Investigates and resolves complex manufacturing process or engineering related issues
• Verifies accuracy of engineering data produced by others
Seeking candidates with experience in any of the following areas:
• Engineering product definition
• Direct engagement designing for aerospace suppliers or airlines
• Experience supporting the validation of compliance to regulatory requirements
• Design for manufacturing
• Software Exp. (ie. Visual Basic, Python, Java)
AA degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience.
Job Location: Everett, WA
Rate: TBD
Duration: 12 - months
Start Date: ASAP
Input Date: 03/31/2026
Address: 160 NW GILMAN BLVD STE 250
City, State: ISSAQUAH, WA 98027
Phone: 425/451-0051
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com
Equipment & Tool Engineer 2
Company is seeking Equipment and Tool Engineers to support multiple positions across our teams in Puget Sound, Washington.
A successful candidate in this role will have passion, creativity, and an insatiable desire for process improvement and efficiency. They will also have a strong desire to be out on the production floor, interacting with mechanics, safety, and tool makers, and directly supporting the production system. In Production Engineering, we need highly responsible professionals committed to upholding the highest standards of safety, quality, and integrity.
This position is a Production Engineering role and requires direct interfacing with the people and equipment on the production floor. A typical day could include:
• Spending up to 8 hours on feet standing/walking on the production floor
• Climbing ladders or stairs to access equipment
• Working at heights or in tight spaces
• Wearing required PPE
•
Primary Responsibilities:
• Investigates and develops equipment and tooling concepts and specifications to satisfy aerospace product design and build requirements.
• Performs tool liaison activities to support tool fabrication and production use
• Participates in design reviews, collects design requirements, creates and revises drawings and models to support the build plan.
• Creates specifications and purchase requests for the acquisition of new equipment and tooling from external vendors
• Checks designs for compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements.
• Develops and documents equipment and tooling inspection and usage instructions, preventative maintenance plans, and supports user training development.
• Manages budgets and schedules to deliver equipment and tooling solutions to customers
Required Skills:
• Bachelor of Science degree in Engineering, Engineering Technology (including Manufacturing Technology), Computer Science, Data Science, Mathematics, Physics, Chemistry
• 1 or more years of related work experience or an equivalent combination of education and experience
Preferred Skills:
• 2 or more years of experience working in a production environment
• Mid-Level: 3 or more years of related work experience or an equivalent combination of education and experience
• Senior Level: 5 or more years of related work experience or an equivalent combination of education and experience
• 3+ years of hands-on experience as a Pressure Vessel Design Engineer.
• 2 or more years of experience working in a production environment
• 2 or more years of Project Management experience
• Working knowledge and application of pressure vessel codes such as ASME Section VIII and its related ASME/ANSI Codes.
• Strong knowledge and application of NBIC codes Part 1, 2, 3, & 4
• Application of piping codes such as ASME B31.1 and/or B31.3.
• Strong understanding of pressure vessel fabrication processes and maintenance procedures.
• Strong understanding of material mechanics & behaviors under conditions such as extreme temperatures and vibrations.
• Strong understanding of non-destructive examination procedures such as magnetic particle examination and ultrasonic testing.
• Knowledge of welding procedures and testing requirements.
• Experience and adeptness in the application of thermodynamics and fluid mechanics principles.
• Hands-on experience with the design of autoclaves for use in composite curing processes.
• Design of quick actuating closures or breech lock door mechanisms.
• 5 or more years of experience working in a production environment
• 5 or more years of 3D modeling experience
• 5 or more years of GD&T experience
Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 2 or more years' related work experience (e.g. Master). In the USA, ABET accreditation is the preferred, although not
required, accreditation standard through advanced technical education
Job Location: Renton, WA
Rate: TBD
Duration: 6 - months
Start Date: ASAP
Input Date: 03/23/2026
Last Updated: 04/11/2026
Address: 160 NW GILMAN BLVD STE 250
City, State: ISSAQUAH, WA 98027
Phone: 425/451-0051
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com
Structural Analysis Engineer 3 - 377314 - (10 OPENINGS)
Company is hiring contractors as Airframe Stress Analysis Engineer (Experienced) to work at their Company Commercial Airplanes Washington Design Center in our Structures Organization based in Everett, WA or Renton, WA. 100% on-site.
As a Structures Analysis contract engineer, you possess a solid understanding of airplane structural analysis methods and tools for both metallic and/or composite structures. You will ensure the airplane has sufficient strength to endure all conditions encountered during its operational life. The analyst also ensures the airplane structure meets all other design requirements including fail-safety, durability and damage tolerance where applicable. Positions could include the following analysis commodities: Fuselage, Wing/Empennage, Propulsion Structures, Systems Stress, Interiors Stress, Seats Stress
- Coordinates with other engineering groups to establish the product's environment.
- Support product design and verify structural integrity by using analytical methods, finite element models/simulations and other analysis tools throughout the product lifecycle to develop the structural environment, characteristics and performance.
- Defines and documents certification and test results to substantiate for customers and regulatory agencies that requirements are satisfied.
- Bachelor's degree in one of the following engineering disciplines: Mechanical, Aerospace, Aeronautical, Civil, or Structural Engineering degrees.
- 8+ years related work experience in aircraft stress analysis.
Minimum of a Bachelor of Science degree from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 5 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD, Master+3 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.
Job Location: Everett, WA
Rate: TBD
Duration: 9 - months
Start Date: ASAP
Input Date: 01/12/2026
Last Updated: 04/11/2026
Address: 160 NW GILMAN BLVD STE 250
City, State: ISSAQUAH, WA 98027
Phone: 425/451-0051
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com
Structural Analysis Engineer 4 - 377313 - (10 OPENINGS)
Company is hiring contractors as Airframe Stress Analysis Engineer (Experienced) to work at their Company Commercial Airplanes Washington Design Center in our Structures Organization based in Everett, WA or Renton, WA. 100% on-site.
As a Structures Analysis contract engineer, you possess a solid understanding of airplane structural analysis methods and tools for both metallic and/or composite structures. You will ensure the airplane has sufficient strength to endure all conditions encountered during its operational life. The analyst also ensures the airplane structure meets all other design requirements including fail-safety, durability and damage tolerance where applicable. Positions could include the following analysis commodities: Fuselage, Wing/Empennage, Propulsion Structures, Systems Stress, Interiors Stress, Seats Stress
- Coordinates with other engineering groups to establish the product's environment.
- Support product design and verify structural integrity by using analytical methods, finite element models/simulations and other analysis tools throughout the product lifecycle to develop the structural environment, characteristics and performance.
- Defines and documents certification and test results to substantiate for customers and regulatory agencies that requirements are satisfied.
- Bachelor's degree in one of the following engineering disciplines: Mechanical, Aerospace, Aeronautical, Civil, or Structural Engineering degrees.
- 12+ years related work experience in aircraft stress analysis.
Minimum of a Bachelor of Science degree from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 9 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+4 years' related work experience, Master+7 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.
Job Location: Everett, WA
Rate: TBD
Duration: 9 - months
Start Date: ASAP
Input Date: 01/12/2026
Last Updated: 04/11/2026
Address: 160 NW GILMAN BLVD STE 250
City, State: ISSAQUAH, WA 98027
Phone: 425/451-0051
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com
Airworthiness & Regulatory Engineer 3
As an engineer in the Company Commercial Airplanes (BCA) Safety and Compliance Investigations (S&CI) team, you will have the opportunity to work independently while leading teams tasked with performing detailed Root Cause Corrective Action (RCCA) investigations related to regulatory compliance issues. This activity enables program and functional leadership to understand the systemic root causes of compliance issues and implement effective corrective actions that contain the issue and prevent recurrence. This position offers exposure to all aspects of airplane certification across the airplane lifecycle. The importance of this function can’t be over-stated as you will contribute to Company product safety by maintaining and restoring compliance with regulatory requirements.
Investigations typically follow the Company Problem Solving Model (BPSM) process, which provides a structured approach to investigations. Engagement with company leadership, certification experts, and functional experts from across the company make this position highly invigorating. We have a close-knit group with dedicated mentors and RCCA experts available for consultation.
Position Responsibilities:
• For any identified issue related to FAA issued Letters of Investigation, Informal or Formal Compliance Actions, Voluntary Disclosures, Self-Audit findings, and Part 25 Airworthiness Non-Compliances, the BCA S&CI team leads the functional engineering organizations (Systems, Structures, Payloads, Propulsion) through the structured investigation process.
• We coordinate closely with Company functional groups, management and executives, and suppliers to ensure all stakeholders are aligned with the investigation’s status and resolution.
• We work with the functional groups within Company to investigate the regulatory compliance issue by identifying the problem statement, developing a comprehensive root cause investigation that leads to systemic root causes, developing containment actions, actions to prevent recurrence, and actions to verify non-recurrence.
• We coordinate closely with the Organizational Designation Authorization (ODA) to ensure the investigation write-up meets regulatory expectations.
• We partner with enterprise groups to continuously improve our processes and tools to ensure we are ready for the future of BCA and to ensure these processes are consistent with the greater Company Enterprise.
We value the ability to communicate complex technical issues with a large variety of audiences, to lead a group of diverse engineers and non-engineers, and to apply airplane level thinking to a variety of technical issues.? As such, we are a valued resource to the broader Chief Aviation Safety Office (CASO), the programs we support, as well as executive leadership.
We also recognize that diversity is a strong component in product safety and compliance, and we recognize that a variety of different thoughts, contributions, backgrounds and opinions are necessary in order to make the safest product we can.
A successful Mid-Level candidate will have the following qualifications:
• Strong written and verbal communication skills
• Ability to work effectively with a diverse team
• Intrinsic aptitude for taking initiative, leading cross functional teams and projects
• Ability and willingness to take ownership of, and facilitate, work activities to ensure they are completed accurately, efficiently, and in a timely manner
Basic Qualifications (Required Skills/Experience):
• Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry
• 5+ years related work experience or an equivalent combination of education and experience
Preferred Qualifications (Desired Skills/Experience):
• Working knowledge with Root Cause Corrective Action (RCCA) tools such as 5-Whys or Fishbone, and/or the Company Problem Solving Model (BPSM)
• 1+ years of experience with commercial airplane operation, certification, safety requirements and procedures
• Working knowledge of FAA Regulatory Compliance and ODA procedures per 8100.15
• 1+ years of experience working with FAA or other regulatory agencies
• 1+ years of experience in Commercial Airplane-Systems design or analysis (e.g. Flight Controls, Hydraulics, Avionics, Fuels, etc.) or Systems Integration
• Pilot’s license
• Airframe & Powerplant (A&P) License
Typical Education & Experience:
Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 5 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD, Master+3 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.
Job Location: Everett, WA
Rate: TBD
Duration: 12 - months
Start Date: ASAP
Input Date: 12/20/2025
Last Updated: 04/11/2026
Address: 160 NW GILMAN BLVD STE 250
City, State: ISSAQUAH, WA 98027
Phone: 425/451-0051
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com
Nondestructive Evaluation Technical Analyst 5
**Must be able to obtain a Secret Clearance. US Citizenship Required.**
100% on site.
Company is looking for a Nondestructive Evaluation Technical Analyst to join our team in Berkeley, MO as the NDE Lab focal. We are looking at a range of experience, including Mid-Level and Lead level NDE Technicians to lead Nondestructive Evaluation testing in the Berkeley, MO. lab. The position is contact to permanent hire after six months of service.
The Midwest Nondestructive Evaluation (NDE) and Fleet Support team is part of the BDS Engineering department. We are an engineering team supporting space, commercial and defense air vehicles programs such as: 787, 777X, F-15, F-18, AV-8B, T-7A, T-45, MQ-25, KC-46, P-8, B-52, B-1, KC-135, Executive Transport platforms, Commercial Crew Transportation, Space Launch, and weapon systems. Our team is responsible for NDE Engineering supporting of pre-production, current production, and post-production efforts.
Along with supporting the aforementioned space commercial and defense programs; the team provides supplier standup/certification, fabrication support/trouble-shooting and fleet support activities across the Company value stream. The team also conducts NDE research and development for both internal and external customers.
Position Responsibilities:
• Apply nondestructive evaluation (NDE) methods/approaches, such as acoustic, electromagnetic, thermal, optical, and radiologic principles, in performing complex analysis and evaluation of parts, materials, processes, technology or equipment through research and testing to ensure safety, reliability and adherence to requirements and specifications.
• Leads, coordinates, and conducts complex analysis of failed parts and processes to reduce or eliminate future failures.
• Generates test plans, identifies, and categorizes failure, determines root cause and documents results and recommendations.
• Maintain compliance with contractual and regulatory obligations.
• Leads the proposal, development, and validation of revisions to procedures and specifications.
• Determines suitability of parts, materials and processes and coordinates resolution of complex issues with suppliers and customers.
• Support audits, root cause analyses, and failure investigations as a subject matter expert.
• Supports continuous improvement of products and processes by leading the design, development, fabrication, testing, evaluation and implementation of new concepts and technology.
• Provide technical guidance and mentoring to junior engineers and technicians.
• Supports the Team Lead and work statement, assist defining strategies and/or provides consultation.
Basic Qualifications (Required Skills/Experience):
• 5+ years of experience in Nondestructive Evaluation
• Excellent written and oral communication skills
• Knowledge of computer aided design tools and systems (e.g., computer aided design/computer aided manufacturing (CAD/CAM), computer aided three dimensional interactive (CATIA), Mentor Graphics, Unigraphics).
• ASNT Level 2 in Eddy Current and Ultrasonic nondestructive evaluation testing methods
• Ability to travel 10% of the time minimum
Preferred Qualifications (Desired Skills/Experience):
• 5+ years of hands-on experience in NDE/NDT engineering in a regulated industry (e.g., aerospace, defense, energy).
• Experience with nondestructive evaluation processes (e.g., ultrasonic testing, radiography, eddy current testing, and penetrant inspection)
• ASNT Level 2 in multiple nondestructive evaluation processes (e.g., ultrasonic testing, radiography, eddy current testing, and penetrant inspection)
• Experience working in multi-discipline teams, a strong desire to work with technical and non-technical customers.
• Strong understanding of materials behavior, stress analysis, and fracture mechanics.
• Experience with project management tools
• Excellent time management skills to manage several simultaneous projects effectively and across various geographical locations.
• Active / Current Secret U.S. Security Clearance preferred but not required.
Education/experience typically acquired through advanced education (e.g. Associate) and typically 9 or more years' related work experience or an equivalent combination of education and experience (e.g. Bachelor+7 years' related work experience, 11 years' related work experience, etc.).
Job Location: Berkeley, MO
Rate: TBD
Duration: 6 - months
Start Date: ASAP
Input Date: 03/06/2026
Last Updated: 04/11/2026
Address: 160 NW GILMAN BLVD STE 250
City, State: ISSAQUAH, WA 98027
Phone: 425/451-0051
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com
Product Review Engineer 3 - 377391
The Liaison Engineering Organization is seeking Mid-Career Liaison Engineers to support operations in Everett, Seattle, Auburn, and or Renton Washington as well as Portland, Oregon. We are looking for a proactive individual who can make prompt engineering decisions and who want to go beyond their desk and into the factory for hands on engineering.
This position requires excellent communication and collaboration skills as the candidate will be partnering closely with production personnel. The candidate will be the engineering representative on the factory floor transforming design into reality.
Position Responsibilities:
Analyzes, conducts root cause analysis and develops dispositions for production non-conformances.
Applies knowledge of Boeing design principles to assess and resolve product/process issues through the product lifecycle.
Applies engineering principles to research technical, operational and quality issues in support of executing final engineering solutions.
Identifies documents, analyzes reported problems and communicates deviations that could impact design intent and safety; recommends and manages resolution.
Develops and implements product/process improvements.
Supports Integrated Product Teams (IPT) and participates in design reviews.
Represents the engineering community from initial build through the production and post-production environment.
Ensures supplier and build partner compliance with Boeing standards.
Develops customer correspondence for continued safe operation and maintenance of equipment.
Participates in on-site disabled product repair teams, accident investigation and support teams.
Analyzes damage repair or structural modification to determine appropriate jacking and shoring, prevent collateral damage and assure a safe work environment.
Designs interim structural repairs and conducts static strength analysis.
Develops non-destructive test procedures, tools and standards.
This position is fully onsite. The selected candidate will be required to work onsite at one of the listed locations. This position involves daily exposure to factory environment which includes stairs, trip hazards, high noise areas, chemical hazards (breathing and handling), and entering airplanes during their many stages of build.
This position participates in the approximately 9-month Company Training Rotation Program, which may involve assignments to the first, second, or third shift, as well as weekend or daily overtime. The specific requirements for shift assignments and overtime vary between sites and are typically covered on a rotation basis. Additionally, there may be travel involved between Puget Sound sites during the training rotation.
Shift: This position is for multiple shifts and may require off shift, weekend, and travel assignments.
The candidate may periodically be assigned to first, second, or third shift as well as weekend or daily overtime. This requirement varies from site to site and is typically covered on a rotation basis.
Basic Qualifications (Required Skills/Experience):
Bachelor's or Masters of Science Degree from an ABET OR ABET equivalent accredited course of study in Engineering
5 or more years of experience in structures, systems, design, or production engineering.
Preferred Qualifications (Desired Skills/Experience):
5 or more years of experience working with MRB (Material Review Board) activities related to aircraft systems or structures.
Hands-on experience with materials and manufacturing processes.
Prior BCA Engineering Material Review Board (MRB) certification
Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 5 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD, Master+3 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.
Job Location: Everett, WA
Rate: TBD
Duration: 10 - months
Start Date: ASAP
Input Date: 03/12/2026
Last Updated: 04/11/2026
Address: 160 NW GILMAN BLVD STE 250
City, State: ISSAQUAH, WA 98027
Phone: 425/451-0051
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com
Electrical Systems Design Engineer 3 - 377269
This position will specifically involve working with Cabin Systems, which encompasses interior lighting, passenger address systems, seatback video, passenger connectivity, satellite connections, in-flight entertainment, and more. Our teams are currently hiring for a broad range of experience levels including Associate and Experienced Electronic Systems Design and Analysis Engineers.
Required skills/qualifications:
1. 3+ years of related work experience or an equivalent combination of education and experience.
2. Experience working in an electrical design engineering environment (with emphasis on electronic and electrical systems design and analysis).
3. Bachelor of Science degree from an accredited course of study in engineering, engineering technology (includes manufacturing engineering technology), chemistry, physics, mathematics, data science, or computer science.
Preferred skills/qualifications:
1. Exceptional organizational skills with attention to detail.
2. Experience within Electrical Systems hardware and software design.
3. Knowledge of FAA certification.
4. Experience with system design and integration during an airplane development program.
5. Experience with Model Based Development tools
Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.
Job Location: Everett, WA
Rate: TBD
Duration: 12 - months
Start Date: ASAP
Input Date: 11/24/2025
Last Updated: 04/11/2026
Address: 160 NW GILMAN BLVD STE 250
City, State: ISSAQUAH, WA 98027
Phone: 425/451-0051
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com
Manufacturing Planner 3 - Electrical - 377319
Job Description: 777-9 program is looking for Manufacturing Engineers to enable aircraft modifications to support Certification Flight Testing for Type Inspection Authorization (TIA). This is a very critical activity in support of the overall Certification of the 777-9.
Primary Responsibilities:
- Tiger Team Member on critical Company Flight Test Project
- Installation Plans for configuration changes (test specific and production).
- Coordination across ME teams for PRR IP creation / revision.
- Review IPs for quality – e.g. missing functional tests, missing BOM items, etc.
- Identifying and planning removals.
- Identifying opportunities to reduce scope (e.g. smaller, more specific functional tests).
- Reviewing tooling requirements for compatible with flightline operations (i.e. not factory specific).
Required Skills:
- Assembly & Installation (A&I) Manufacturing Engineering (ME).
Preferred Skills:
- Systems, Electrical and Propulsions are preferred (not required).
- CMES, PDM, CAPP, CMES (IP edit and NCO generation), ENOVIA, CATIA, IVT, Etc.
- Change incorporation instructions (e.g. PRR, LCCX, mods / service bulletins), removals, and 777 airplane configuration knowledge.
Education/experience typically acquired through advanced education (e.g. Associate) and typically 3 or more years' related work experience or an equivalent combination of education and experience (e.g. Bachelor+1 years' related work experience, 5 years' related work experience, etc.).
Job Location: Everett, WA
Rate: TBD
Duration: 6 - months
Start Date: ASAP
Input Date: 01/16/2026
Last Updated: 04/11/2026
Address: 160 NW GILMAN BLVD STE 250
City, State: ISSAQUAH, WA 98027
Phone: 425/451-0051
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com
Systems Engineer 4 - 377327
**Secret Clearance Required to Start.**
100% onsite. Position can be in Colorado Springs, CO or Huntsville, AL
Company’s Missile Defense National Team is seeking motivated and talented System Engineers in Colorado Springs, Colorado!
Missile Defense programs are part of the Ballistic Missile Defense System which defends the United States homeland and its regional allies all over the world. Be a part of our passionate and highly-motivated team who are excited to be on the forefront of defense of our nation.
Primary Responsibilities:
• Team member will work with other industry partners in the development and execution of a comprehensive assessment program supporting the C2BMC Element of the Ballistic Missile Defense System.
• Evaluates systems under various scenarios and architectures to determine and/or optimize overall system mission performance in a framework giving insight into performance that may be employed by Missile Defense Agency and Warfighters
• Performs various analyses to optimize total system of systems and/or system architecture
• Develops and maintains analysis tools of varied fidelity including modeling and simulation tools to predict performance against evolving threats of current and future missile defense systems
• Develops, maintains and identifies improvements for the planning, organization, implementation and monitoring of requirements management processes, tools, risk, issues, opportunity management and technology readiness assessment processes
• Defines, schedules, assigns, and executes tasks, and monitors completion to lead the monitoring of integration and checkout activities, receiving and evaluating of results of activities, and approving/disapproving of each by determining whether results meet the checkout requirements, so that integration activities can proceed
• Supporting the subject matter experts for integration and test domains, system engineering system performance/ domains, system-specific issues, processes, tools, and regulations
• Support efforts to solve complex missile defense problems
• Utilization of MBSE tools such as CAMEO or DOORS, System Architect and mathematical modeling and simulation to provide thought leadership and lead trade studies in assigned areas
• Requirements and architecture development in support of MDS systems
• Drive the system engineering integration and test or system analysis approach
• Develop, select, tailor and deploy integration and test processes, tools and metrics
• Execute and document integration and test activities and events
• Develop, define efficiencies and improvements to tools to improve team productivity
• Perform system analysis trade studies to define technical concepts and solutions
• This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. (Colorado Springs, CO.)
• This position may require the ability to obtain access to an MDA facility. Access to the facility requires a background investigation by U.S. government authorities.
• This position requires candidate acceptance by industry partner resource control board.
• This position requires an active Secret U.S. Security Clearance. (A U.S. Security Clearance that has been active in the past 24 months is considered active.)
Basic Qualifications (Required Skills/Experience):
• Bachelor or Master of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.
• Experience using analytical, collaboration, communication and organizational skills
• Minimum of 2 year of in system engineering (e.g. Systems, Design, Architecture, Integration, Requirements or Test)
Preferred Qualifications (Desired Skills/Experience):
• 4 or more years' related work experience or an equivalent combination of education and experience
• Ability to obtain a Top-Secret clearance or an active Top Secret clearance highly desired
• Growing understanding of DoD and missile defense command and control, battle management, architectures and communications system concepts, mission, and common system test and data analysis techniques
• Experience with verification of requirements
• Must have an understanding of System Engineering and iterative product development using Agile practices.
• Experience in developing capability assessments, assessment objectives and related assessment plans and procedures.
• Experience in scripting and automated test development is a plus.
• This position requires exposure to a broad range of personnel within MDA and its associated sub-elements.
• Experience using MATLAB, Python, JAVA, or similar language environment to develop analytical tools or perform numerical modeling of complex systems.
• Demonstrated experience performing systems analysis or performance analysis including system concept trade studies, operational analysis, requirements analysis, feasibility analysis, system performance measures of effectiveness analysis (incl. technical performance measures), discrimination methods and techniques definition, probability analysis, or vehicle analysis.
• Demonstrated experience modeling or simulating missile defense elements or systems in similar domains (air combat, air defense, intercept of ballistic targets, intercept of non-ballistic targets, space vehicles, sub-orbital mechanics, etc.)
• Experience with Agile Development processes is a plus
Typical Education/Experience:
Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.
Job Location: CO Springs, CO
Rate: TBD
Duration: 12 - months
Start Date: ASAP
Input Date: 01/20/2026
Last Updated: 04/11/2026
Address: 160 NW GILMAN BLVD STE 250
City, State: ISSAQUAH, WA 98027
Phone: 425/451-0051
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com
Electronic Design and Analysis Engineer 3 - 377455
Our team provides support to the airplane's Electronic Flight Bag (EFB), Corenetwork, Avionics Gateway (AG), CWLU, Maintenance Access Terminal (MAT) across various Company Airplane models. Our work helps airlines access real-time airplane data that they need to make important decisions. We work closely with the testing team to help troubleshoot and find the root cause of problems that can arise within these systems. We are a fun and collaborative team located in Everett, WA and work 100% onsite. We are seeking a experienced Electrical Network and Digital Connectivity System Product Support Engineer.
This role will be responsible for designing, implementing, and maintaining robust network systems and digital connectivity solutions to support our cutting-edge aerospace projects. The ideal candidate will be able to work independently, have proficient understanding of network and software systems, and an understanding of how those systems deploy within different architectures across multiple different airplane models. This person will be able to translate high-level technical requirements to specific architecture and operational specifications, including the physical integration of complex electrical systems and components into our airplanes, as well as communicating with customers and stakeholders expanding across multiple organizations to implement high quality and service ready hardware and software systems. You will validate designs through both laboratory and airplane testing and work with aircraft systems from initial concept through certification, delivery, and production lifecycle.
Key Responsibilities:
Develop and document moderately complex electronic and electrical system requirements
Designs hardware, software and interface specifications
Coordination with suppliers on the development of hardware, software and interface specifications
Tests and validates to ensure system designs meet operational and functional requirements
Assists in monitoring supplier performance to ensure system integration and compliance with requirements
Solves problems concerning fielded hardware and software over the entire product lifecycle
Research specific technology advances for potential application to company business needs
Participate as a contributing member to any airplane installation designs and certification efforts for Network and Digital Connectivity Systems and Airplane Programs
Develop operational use cases of systems and how to evaluate them
Utilize Model Based System Engineering (MBSE) to develop architecture mapping and set the stage for simulated test environments
Develop and execute detailed, integrated test procedures/plans
Define and configure Lab setup for Testing
Create software scripts to support and/or automate testing procedures and analysis
Basic Qualifications
Bachelor of Science degree from an accredited course of study in engineering, engineering technology (including manufacturing engineering technology), chemistry, physics, mathematics, data science, or computer science.
5+ years of related work experience or an equivalent combination of education and experience
Work with Linux/UNIX Operating Systems
Knowledge of network, hardware and software systems and technical architecture.
Experience in systems engineering involving system requirements, functional decomposition and allocation, integrated design, analysis and evaluation, verification.
Preferred Qualifications
Knowledge of FAA certification.
Experience with system design and integration during an airplane development program.
Experience working and communicating with cross functional teams.
Demonstrated project management skills within a fast paced highly integrated environment.
Experience with Model Based Development tools.
Experience in computer networking systems, with a strong ability to troubleshoot and debug issues in aerospace software and hardware environments.
Ability to read software logs and code
Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.
Job Location: Everett, WA
Rate: TBD
Duration: 12 - months
Start Date: ASAP
Input Date: 03/30/2026
Last Updated: 04/11/2026
Address: 160 NW GILMAN BLVD STE 250
City, State: ISSAQUAH, WA 98027
Phone: 425/451-0051
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com
T-7A Mission Systems Senior Technical Lead Engineer 5
**Must be able to obtain a Secret Clearance. US Citizenship Required.**
The Company is seeking a T-7A Mission Systems Senior Technical Lead Engineer (Level 5) to join the T-7A Mission Systems Team located in Berkeley, MO.
As a Technical Lead Engineer on the T-7A Mission Systems Hardware team, your role will support the development, qualification, and production of mission computing, communications, navigation, surveillance, datalink and display avionics. You will be responsible for managing the technical performance of critical suppliers to ensure integration and verification of installed system performance. The T-7A Mission Systems includes new development and off-the-shelf hardware integrated in an advanced laboratory and being verified in flight test. The Mission Systems development activities include hardware requirements decomposition, qualification test, laboratory and aircraft integration, formal verification test, and production support.
The T-7A Red Hawk Advanced Pilot Training Program is an exciting, dynamic program that is dedicated to breaking the norm. Join the team and Let’s Go Fly!
Position Responsibilities:
• Develops and maintains relationships and partnerships with customers, stakeholders, and peers
• Provide technical guidance and mentorship to junior engineers, fostering a culture of continuous learning and improvement
• Provides oversight and approval of technical approaches, products and processes
• Leads work with customers to develop and document electronic and electrical system requirements on complex projects
• Leads analysis and translation of complex requirements into system architecture, hardware and software designs and interface specifications
• Leads testing and validation work on complex system designs to assure that operational and functional requirements are met
• Manages performance of critical suppliers to ensure system integration and compliance with requirements
• Assigns responsibility for activities to team members and ensures technical correctness and consistency of products and services
• Leads research into technology advances for potential application to company business needs
Required Qualifications: (Required Skills/Experience):
• Bachelor of Science degree or higher from an accredited course of study in engineering, engineering technology (includes manufacturing engineering technology), chemistry, physics, mathematics, data science, or computer science
• 9+ years of systems engineering experience involving: system requirements, functional decomposition and allocation, integrated design, analysis and evaluation, verification
• 9+ years of experience with Avionics Hardware & Software development, design, production and project management
• 9+ years of experience in process development and qualification, physical and functional integration and installation design and resolving supplier technical issues
• 9+ years of experience with Hardware and LRU development, test and qualification.
Preferred Qualifications: (Desired Skills/Experience):
• 10 or more years' related work experience or an equivalent combination of education and experience
• Experience with Advanced Cockpit Displays: Heads Up Display (HUD), Up Front Control Display (UFCD), Large Area Displays (LAD), and mission systems avionics equipment
• Active U.S. Secret Security Clearance strongly preferred
• Previous experience in the defense or aerospace industry
• Experience with commercial and military avionics systems
• Experience working with suppliers and supply chain management
• Proposal development experience
Bachelor of Science degree or higher from an accredited course of study in engineering, engineering technology (includes manufacturing engineering technology), chemistry, physics, mathematics, data science, or computer science
Job Location: Berkeley, MO
Rate: TBD
Duration: 12 - months
Start Date: ASAP
Input Date: 12/16/2025
Last Updated: 04/11/2026
Address: 160 NW GILMAN BLVD STE 250
City, State: ISSAQUAH, WA 98027
Phone: 425/451-0051
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com
Embedded Software Engineer 3
**Must be able to obtain a Secret Clearance. US Citizenship Required.**
The Company is currently seeking an Experienced Embedded Software Engineer to support our Precision Engagement Systems located in Saint Charles, MO. The Precision Engagement Systems organization is a strong and growing business that produces a variety of precision-guided weapons, which are employed around the world to support the defense of the United States and more than 30 U.S. allied countries.
Our leadership team is committed to attracting and developing top talent to support critical Direct Attack (DA) and Cruise Missile Systems (CMS) missions. Aligned with customer objectives, we deliver tailored software solutions through our exceptional workforce. In Saint Charles, MO, we support Direct Attack weapons (JDAM, SDB, MOP, HAAWC and derivatives) and Cruise Missiles (SLAM-ER, Harpoon legacy and development weapons) deployed on a range of military aircraft and select ground platforms.
Join Us. Build the Future.
We are seeking talented experienced software engineers to work with a multi-discipline engineering team to design and develop software solutions for these platforms. Engineers on this team work in all phases of the software development lifecycle. We are actively building the team to achieve a growing work scope that includes implementing real-time embedded software applications, creating models and simulations, deploying DevOps methodologies and development environments, developing support applications, and maintaining software configurations and processes for an Agile development lifecycle.
Why St. Charles, MO:
• On-site cafeteria offering hot meals and grab-and-go options.
• Active Employee Resource Groups (ERGs) providing networking, mentorship, and community engagement.
• Campus walking path and outdoor spaces for breaks, walking meetings, and wellness activities.
• Fitness and wellness programs, local commuter resources, and community events.
Position Responsibilities:
• Collaborate with a multi-discipline engineering team to create and implement Operational Flight Program software solutions
• Contribute in all phases of the software development lifecycle in an Agile development environment
• Develop solutions using Ada, C#, and Python
• Test your software and assist system level testing to verify correct software functionality
• Analyze problem reports and troubleshooting software defects
• Develop leadership skills and experience
• Opportunity to work directly with United States Air Force and Navy customers
Basic Qualifications (Required Skills/ Experience):
• 3+ years of experience in real-time embedded software development
• 3+ years of experience in developing software using Object Oriented principles
• 3+ years of experience working in a team environment
Preferred Qualifications:
• Bachelor of Science degree from an accredited course of study in engineering, engineering technology (includes manufacturing engineering technology), chemistry, physics, mathematics, data science, computer science, computer engineering, software engineering or equivalent experience strongly preferred
• Active U.S. secret clearance
• Experience with Ada, Python, or C#
• Experience working in an Agile software development environment
• Experience with Git or a similar version control system
• Experience developing and tracing software requirements
Job Location: St Charles, MO
Rate: TBD
Duration: 12 - months
Start Date: ASAP
Input Date: 04/11/2026
Address: 160 NW GILMAN BLVD STE 250
City, State: ISSAQUAH, WA 98027
Phone: 425/451-0051
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com
Payload Systems Design Engineer 4 - (20 OPENINGS)
The Payloads Organization is responsible for everything you see when you fly; and much of which you don’t. The Interiors of the airplane, along with the cargo compartments, exterior markings, associated systems, and cabin safety all make up Payloads. We are how our airline customers fulfill their mission and represent their brand and shape how the public experiences flight. Our organization is a fast paced, dynamic environment, which pulls from many engineering backgrounds.
This role is responsible for a statement of work that spans the product lifecycle: supporting customer configuration development, supplier engagement, validating and verifying design requirements, integrating business needs, and supporting the product through the production and certification processes. The selected candidate will include the need to interface with other members of project engineering, production engineering, program/product teams, management, and technical staff to define and implement engineering solutions. The successful candidate will be able to combine the expertise and resources of the interiors organization to certify and deliver the best interiors products within the industry.
Payloads is seeking candidates with experience in any of the following areas:
Engineering support and project leadership within a production system
Direct engagement working with/for aerospace suppliers or airlines
Validating/demonstrating compliance to regulatory requirements
Working with regulators
Design for manufacturing
Aircraft cargo compartment and handling system design, integration, and/or certification
Position Responsibilities:
Leads the development, integration and documentation of interior payload system requirements to establish the system design.
Performs or oversees approval of analyses and test/inspection results to validate and verify systems and components meet requirements and specifications.
Leads teams on managing supplier performance, test and production activities and coordinates with the supplier to optimize the design and achieve program goals.
Leads the development of new design/analysis processes and tools to improve the effectiveness, quality and efficiency of the development effort.
Investigates emerging technologies to develop concepts for future product designs to meet projected requirements.
Lead teams to develop, maintain and modify structural and interior payload system and component design, using 3-D Computer Aided Design tools and/or other design methods, to provide product definition to other engineering groups, production operations, suppliers and external customers throughout the product lifecycle.
Basic Qualifications (Required Skills/Experience):
- Bachelor of Science degree in Engineering (with a focus on Mechanical, Civil, Aerospace Aeronautical or Material Sciences)
- 5+ years of experience in engineering, including design, integration, and/or certification or equivalent combination of additional education and relevant experience
- Experience leading a cross-functional team
Preferred Qualifications (Desired Skills/Experience):
- Strong understanding and demonstrated experience with FAA Title 14 Part 25 and/or EASA equivalent
- Experience in aerospace interiors, materials and properties, design criteria and release processes
- Demonstrates good problem solving skills and critical thinking
- Ability to use a variety of media to clearly convey information and ideas to a variety of audiences
- Demonstrated interest in continuous personal learning and development
Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 9 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+4 years' related work experience, Master+7 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.
Job Location: Everett, WA
Rate: TBD
Duration: 10 - months
Start Date: ASAP
Input Date: 12/22/2025
Last Updated: 04/11/2026
Address: 160 NW GILMAN BLVD STE 250
City, State: ISSAQUAH, WA 98027
Phone: 425/451-0051
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com
Product Review Engineer 5 - 377389
The Liaison Engineering Organization is seeking Consultant Level 5 Liaison Engineers to support operations in Everett, Seattle, Auburn, and or Renton Washington. We are looking for a proactive individual who can make prompt engineering decisions and who want to go beyond their desk and into the factory for hands on engineering.
This position requires excellent communication and collaboration skills as the candidate will be partnering closely with production personnel. The candidate will be the engineering representative on the factory floor transforming design into reality.
Position Responsibilities:
Analyzes, conducts root cause analysis and develops dispositions for production non-conformances.
Applies knowledge of Boeing design principles to assess and resolve product/process issues through the product lifecycle.
Applies engineering principles to research technical, operational and quality issues in support of executing final engineering solutions.
Identifies documents, analyzes reported problems and communicates deviations that could impact design intent and safety; recommends and manages resolution.
Develops and implements product/process improvements.
Supports Integrated Product Teams (IPT) and participates in design reviews.
Represents the engineering community from initial build through the production and post-production environment.
Ensures supplier and build partner compliance with Boeing standards.
Develops customer correspondence for continued safe operation and maintenance of equipment.
Participates in on-site disabled product repair teams, accident investigation and support teams.
Analyzes damage repair or structural modification to determine appropriate jacking and shoring, prevent collateral damage and assure a safe work environment.
Designs interim structural repairs and conducts static strength analysis.
Develops non-destructive test procedures, tools and standards.
This position is fully onsite. The selected candidate will be required to work onsite at one of the listed locations. This position involves daily exposure to factory environment which includes stairs, trip hazards, high noise areas, chemical hazards (breathing and handling), and entering airplanes during their many stages of build.
This position participates in the approximately 9-month Company Training Rotation Program, which may involve assignments to the first, second, or third shift, as well as weekend or daily overtime. The specific requirements for shift assignments and overtime vary between sites and are typically covered on a rotation basis. Additionally, there may be travel involved between Puget Sound sites during the training rotation.
Shift: This position is for multiple shifts and may require off shift, weekend, and travel assignments.
The candidate may periodically be assigned to first, second, or third shift as well as weekend or daily overtime. This requirement varies from site to site and is typically covered on a rotation basis.
Basic Qualifications (Required Skills/Experience):
- Bachelor's or Masters of Science Degree from an ABET OR ABET equivalent accredited course of study in Engineering
- 14 or more years of experience in structures, systems, design, or production engineering.
- Current or Prior BCA MRB in the last 2 years.
Preferred Qualifications (Desired Skills/Experience):
- 14 or more years of experience in structures, systems, design, or production engineering (Senior Level).
- Hands-on experience with materials and manufacturing processes.
Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 14 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+9 years' related work experience, Master+12 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.
Job Location: Everett, WA
Rate: TBD
Duration: 10 - months
Start Date: ASAP
Input Date: 03/12/2026
Last Updated: 04/11/2026
Address: 160 NW GILMAN BLVD STE 250
City, State: ISSAQUAH, WA 98027
Phone: 425/451-0051
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com
Product Review Engineer 4 - 377388
The Liaison Engineering Organization is seeking Expert Liaison Engineers to support operations in Everett, Seattle, Auburn, and or Renton Washington as well as Portland, Oregon. We are looking for a proactive individual who can make prompt engineering decisions and who want to go beyond their desk and into the factory for hands on engineering.
This position requires excellent communication and collaboration skills as the candidate will be partnering closely with production personnel. The candidate will be the engineering representative on the factory floor transforming design into reality.
Position Responsibilities:
Analyzes, conducts root cause analysis and develops dispositions for production non-conformances.
Applies knowledge of Boeing design principles to assess and resolve product/process issues through the product lifecycle.
Applies engineering principles to research technical, operational and quality issues in support of executing final engineering solutions.
Identifies documents, analyzes reported problems and communicates deviations that could impact design intent and safety; recommends and manages resolution.
Develops and implements product/process improvements.
Supports Integrated Product Teams (IPT) and participates in design reviews.
Represents the engineering community from initial build through the production and post-production environment.
Ensures supplier and build partner compliance with Boeing standards.
Develops customer correspondence for continued safe operation and maintenance of equipment.
Participates in on-site disabled product repair teams, accident investigation and support teams.
Analyzes damage repair or structural modification to determine appropriate jacking and shoring, prevent collateral damage and assure a safe work environment.
Designs interim structural repairs and conducts static strength analysis.
Develops non-destructive test procedures, tools and standards.
This position is fully onsite. The selected candidate will be required to work onsite at one of the listed locations. This position involves daily exposure to factory environment which includes stairs, trip hazards, high noise areas, chemical hazards (breathing and handling), and entering airplanes during their many stages of build.
This position participates in the approximately 9-month Company Training Rotation Program, which may involve assignments to the first, second, or third shift, as well as weekend or daily overtime. The specific requirements for shift assignments and overtime vary between sites and are typically covered on a rotation basis. Additionally, there may be travel involved between Puget Sound sites during the training rotation.
Shift: This position is for multiple shifts and may require off shift, weekend, and travel assignments.
The candidate may periodically be assigned to first, second, or third shift as well as weekend or daily overtime. This requirement varies from site to site and is typically covered on a rotation basis.
Basic Qualifications (Required Skills/Experience):
Bachelor's or Masters of Science Degree from an ABET OR ABET equivalent accredited course of study in Engineering
9 or more years of experience in structures, systems, design, or production engineering (Experienced).
Preferred Qualifications (Desired Skills/Experience):
9 or more years of experience working with MRB (Material Review Board) activities related to aircraft systems or structures (Experienced).
Hands-on experience with materials and manufacturing processes.
Prior BCA Engineering Material Review Board (MRB) certification
Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 9 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+4 years' related work experience, Master+7 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.
Job Location: Everett, WA
Rate: TBD
Duration: 10 - months
Start Date: ASAP
Input Date: 03/12/2026
Last Updated: 04/11/2026
Address: 160 NW GILMAN BLVD STE 250
City, State: ISSAQUAH, WA 98027
Phone: 425/451-0051
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com
Software Configuration Management Specialist 3
**Must be able to obtain a Secret Clearance. US Citizenship Required.**
The Company Defense, Space & Security (BDS) Software Engineering organization is seeking a Software Configuration Management Specialist (Associate or Experienced) for the Precision Engagement Systems programs team in St. Charles, MO (St. Louis Metro Area) to perform configuration planning, identification, change control, tracking, and verification, and facilitate program baseline management.
Our teams are currently hiring for a broad range of experience levels including; Associate and Experienced Level Configuration Managers.
The Software Configuration Management Specialist will be a member of the build team and will support the Change Configuration Board (CCB). This role reviews all software releases for accuracy, documents CCB meetings by capturing minutes, tracks and follows up on action items, and coordinates final release activities.
The successful candidate is highly organized, detail-oriented, and a proactive self-starter who can independently analyze issues and drive them to resolution. Flexibility, initiative, and resourcefulness are essential to succeed in this role.
Position Responsibilities:
• Lead and manage the Change Control Board (CCB) process for software: schedule and facilitate CCB meetings, prepare agendas, record minutes, track action items, and ensure changes are reviewed and approved before implementation.
• Produce and maintain program CM artifacts: CM plans, product/document identification schemes, baselines, and traceability records.
• Prepare and process change documents: Engineering Change Proposals (ECP), Requests for Variance (RFV), Change Documents/Requests (CD/CRs), and related approvals.
• Oversee software build and release activities: plan, schedule, coordinate and execute builds and deployments; operate and improve build/release processes to minimize errors and cycle time.
• Manage version control, repositories, CI/CD pipelines, and build environments; resolve environment inconsistencies and release failures.
• Perform configuration audits and verification to confirm product/documentation baselines.
• Assess prime and supplier contract CM requirements and coordinate supplier change management.
• Support determinations of export authority for technical work products and assist with industry quality audits for CM.
• Collaborate with customers and cross-functional stakeholders to align release schedules, program planning, and program-level CM activities.
• Drive continuous improvement of CM processes, tooling, and metrics.
Basic Qualifications: (Required Skills/ Experience)
• Experience with Software Development Lifecycle (SDLC) and change management practices
• Familiarity with Atlassian tools (Jira, Confluence) and Microsoft Office (Excel, Word, PowerPoint)
• 1+ years editing PDF and Word files
Preferred Qualifications: (Desired Skills/Experience)
• 3 or more years' related work experience or an equivalent combination of education and experience
• Bachelor of Science degree from an accredited course of study in engineering, engineering technology (including manufacturing engineering technology), chemistry, physics, mathematics, data science, or computer science
• Experience leading or coordinating teams, formally or informally
• Experience with version control systems and build/release tooling (e.g., Git, CI/CD)
• Experience in Configuration Management
• Ability to accomplish tasks through formal channels and informal networks; an understanding of the cultures of organizations and ability to apply this information in a way that strengthens the organization's strategic plan and profitability
• Strong written and verbal communication skills, attention to detail, and demonstrated process improvement mindset
Job Location: St Charles, MO
Rate: TBD
Duration: 12 - months
Start Date: ASAP
Input Date: 03/12/2026
Last Updated: 04/11/2026
Address: 160 NW GILMAN BLVD STE 250
City, State: ISSAQUAH, WA 98027
Phone: 425/451-0051
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com
| Back to Advanced Job Search | |