Build the Networks Behind Next-Gen Technology.  Power the Future of Advanced Manufacturing as a Sr Network Engineer!

Pay Rate: $72/hr | Location: Richardson, TX

Join a cutting-edge environment where IT meets advanced manufacturing. As a Senior Network Engineer, you’ll play a critical role in architecting, deploying, and supporting both IT and Operational Technology (OT) infrastructure at a highly innovative, mission?critical semiconductor manufacturing site.

This is your opportunity to work on next-generation infrastructure, AI-driven automation, and secure network architectures that directly impact production, performance, and scalability.

 What You’ll Do

You’ll operate at the intersection of enterprise IT and industrial OT, driving reliable, secure, and high-performing network environments:

• Architect, deploy, and support enterprise and manufacturing network infrastructure (LAN, WLAN, SD-WAN, IoT)
  
• Provide operational support from corporate network layers down to factory floor equipment communications
  
• Design and implement Special Use Networks (SUN) to isolate and secure mission-critical manufacturing systems
  
• Lead migration from enterprise-wide authentication models to site-level domain controller authentication
  
• Troubleshoot complex network issues across IT/OT layers to ensure uptime and performance
  
• Deploy and support Cisco-based network technologies, including switches, firewalls, and wireless systems
  
• Enable equipment integration and automation in partnership with engineering teams
  
• Ensure compliance with cybersecurity policies and semiconductor industry standards
  
• Maintain thorough network documentation, including topology diagrams and configurations
  
• Monitor performance, capacity, and network health using advanced tools and dashboards
  
• Participate in cross-functional collaboration and daily operational support meetings
  

 Required Qualifications

• Bachelor’s degree in Information Technology or related field
  
• 5+ years of experience supporting enterprise and industrial network environments
  
• Strong hands-on experience with Cisco networking technologies
  
• Experience in manufacturing or factory floor (OT) environments and IT/OT convergence
  
• Deep knowledge of networking fundamentals:
  
  
  
  • VLANs, subnetting, routing, switching
    
  • DNS, DHCP, NAT, VPNs
    
  • Firewall configuration
    
  
  
  
• Experience with high availability, redundancy, QoS, and disaster recovery strategies
  
• Familiarity with DevOps networking practices (CI/CD, IaC, monitoring pipelines)
  
• 2+ years PowerShell scripting experience
  
• Experience with service platforms (e.g., ServiceNow)
  
• Strong documentation, troubleshooting, and problem-solving skills
  

 Preferred Qualifications

• Advanced degree in IT, Computer Science, or Engineering
  
• CCNA or equivalent certification
  
• Experience with multi-vendor environments (Cisco, Arista, Palo Alto, Dell)
  
• Familiarity with industrial systems such as SCADA, MES, APC, and FDC
  
• Knowledge of secure network architectures, segmentation, and DMZ design
  
• Experience with patching and automation tools (e.g., Tanium, Chef)
  
• Background in data protection and recovery platforms (e.g., Veeam, Rubrik)
  
• Strong collaboration skills with the ability to influence cross-functional teams
  

 Why Join Us?

• Work on leading-edge technology in semiconductor manufacturing and AI-driven automation
  
• Influence both IT and OT architecture in a complex, high-impact environment
  
• Hands-on role with real ownership and visibility across operations
  
• Collaborative culture with engineering, IT, and manufacturing teams
  
• Competitive compensation and flexibility after onboarding period
  
• Opportunity to shape secure, scalable network infrastructure at the forefront of innovation
  

 Ready to Engineer the Networks of Tomorrow?

If you’re passionate about advanced networking, industrial systems, and solving complex challenges in a fast-paced environment, apply today and take your career to the next level.



This position requires use of information or access to facilities subject to the International Traffic in Arms Regulations (ITAR) and/or Export Administration Regulations (EAR). These regulations may limit access of controlled technologies: 1) to U.S. Persons, including U.S. Citizens, lawful permanent residents, and other narrow categories including refugees and asylees, or 2) to certain foreign nationals that have received an export license.  

 

• The California Fair Chance Act
• Los Angeles City Fair Chance Ordinance
• Los Angeles County Fair Chance Ordinance for Employers
• San Francisco Fair Chance Ordinance

Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Be the Driving Force Behind an Exceptional Candidate Experience – Join a Leader in Aviation as an Administrative Assistant / Talent Acquisition Coordinator

Location: Remote

Job Type: Full-Time Consultant (12-Month Assignment)

Schedule: Monday–Friday | 1st Shift | 7:30 AM – 4:30 PM

Pay Rate: $27.11 per Hour

Help Build the Future of Aviation Talent

PDS Tech Commercial is partnering with a leading organization in the aviation industry to find a highly organized and detail-oriented Administrative Assistant / Talent Acquisition Coordinator. This is an exciting opportunity to play a critical role in the hiring process by supporting recruitment operations and ensuring candidates receive a seamless, professional experience from interview scheduling through onboarding activities.

If you excel at coordination, thrive in a fast-paced environment, and enjoy being the behind-the-scenes force that keeps complex processes running smoothly, this role is for you.

What You'll Do

As a key member of the Talent Acquisition team, you'll provide administrative and operational support that helps attract top talent to a world-class aviation organization.

Day-to-Day Responsibilities

• Coordinate and schedule interviews across multiple time zones for candidates, hiring managers, recruiters, and interview panels
  
• Manage complex calendars, including executive, panel, and high-volume interview scheduling
  
• Serve as a primary point of contact for candidates throughout the interview process
  
• Provide timely communication, interview instructions, and status updates to candidates
  
• Arrange candidate travel, including flights, hotel accommodations, and transportation
  
• Process and track candidate expense reimbursements in accordance with company guidelines
  
• Prepare and distribute interview schedules, candidate packets, evaluation forms, and related materials
  
• Maintain accurate candidate information and status updates within applicant tracking systems (ATS)
  
• Support recruiting operations by tracking scheduling metrics and coordination activities
  
• Identify opportunities to improve hiring processes, workflows, and candidate experiences
  
• Assist with additional Talent Acquisition and administrative support functions as business needs evolve
  
• Ensure recruiting activities comply with applicable employment laws, OFCCP requirements, and EEOC guidelines
  

Required Qualifications

• High School Diploma or equivalent with 8+ years of relevant experience, or
  
• Bachelor's Degree with 4+ years of relevant experience
  
• Strong organizational skills with the ability to manage multiple priorities simultaneously
  
• Exceptional attention to detail and time management abilities
  
• Excellent written and verbal communication skills
  
• Ability to work independently in a remote environment while supporting a high-volume team
  

Preferred Qualifications

• 1-2 years of Talent Acquisition coordination, administrative assistant, recruiting support, or heavy calendaring experience
  
• Advanced proficiency with Microsoft Office Suite, including Outlook, Word, and Excel
  
• Experience scheduling meetings and coordinating activities across multiple stakeholders and time zones
  
• Experience using Workday or other Human Resources Information Systems (HRIS) and Applicant Tracking Systems (ATS)
  
• Previous experience supporting recruiting, HR, or talent acquisition functions
  

Why Join Us?

At PDS Tech Commercial, we connect talented professionals with opportunities that make a difference. When you join this team, you'll have the chance to support hiring initiatives that contribute to the advancement of a globally recognized aviation organization.

What Makes This Opportunity Stand Out?

• 100% remote work environment
  
• Competitive pay at $27.11 per hour
  
• Stable, full-time schedule with consistent daytime hours
  
• Opportunity to work with a respected leader in the aviation industry
  
• Collaborative and supportive team culture
  
• Valuable experience within a fast-paced Talent Acquisition organization
  
• A role where your organization, communication, and coordination skills have a direct impact on business success
  

Every interview you schedule, every candidate you support, and every process you streamline helps connect talented professionals with careers that shape the future of aviation.

Apply Today

Ready to put your organizational expertise to work with an industry-leading aviation organization?

Apply now and join PDS Tech Commercial as an Administrative Assistant / Talent Acquisition Coordinator, where your attention to detail and passion for delivering exceptional experiences can make a lasting impact.



This position requires use of information or access to facilities subject to the International Traffic in Arms Regulations (ITAR) and/or Export Administration Regulations (EAR). These regulations may limit access of controlled technologies: 1) to U.S. Persons, including U.S. Citizens, lawful permanent residents, and other narrow categories including refugees and asylees, or 2) to certain foreign nationals that have received an export license.                                               

 

• The California Fair Chance Act
• Los Angeles City Fair Chance Ordinance
• Los Angeles County Fair Chance Ordinance for Employers
• San Francisco Fair Chance Ordinance

Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Customer Support Specialist – Keep Aviation Moving, One Customer at a Time

Join PDS Tech Commercial and partner with a leader in the aviation industry as a Customer Support Specialist in Hialeah, FL. If you're a customer-focused professional who excels at problem-solving, relationship building, and managing complex orders, this is your opportunity to play a critical role in supporting aviation customers and ensuring mission-critical parts reach their destinations on time.

Position Overview

Job Title: Customer Support Specialist

Job Type: Full-Time Consultant

Location: Hialeah, FL (Onsite)

Schedule: Monday – Friday | First Shift | 8:00 AM – 5:00 PM

Pay Rate: $19.38 per hour

Start Date: ASAP

Make an Impact

In the aviation industry, every part matters—and every customer interaction makes a difference. As a Customer Support Specialist, you'll serve as a key liaison between customers, warehouse operations, sales teams, quality departments, and other stakeholders to ensure the timely processing, tracking, and resolution of customer orders.

Your ability to analyze data, resolve challenges, and maintain strong customer relationships will directly contribute to operational success, customer satisfaction, and supply chain performance.

What You'll Do

As a Customer Support Specialist, your responsibilities will include:

• Reviewing customer purchase orders to assess requirements and ensure order accuracy.
  
• Processing and maintaining customer orders through Cardex (ERP) systems and customer portals.
  
• Partnering with warehouse personnel, Sales, Quality, and other departments to resolve order-related issues efficiently.
  
• Prioritizing orders based on shipping requirements and operational urgency.
  
• Researching and resolving order discrepancies using ERP system data and reporting tools.
  
• Managing open orders and proactively addressing pending issues.
  
• Monitoring critical and high-priority orders to ensure on-time shipment and delivery.
  
• Expediting complex customer requests and coordinating cross-functional solutions.
  
• Resolving customer claims, returns, RMAs, credit and rebill requests, and billing issues.
  
• Conducting root cause analysis and implementing corrective actions to prevent recurring issues.
  
• Supporting Accounts Receivable with customer payment and collection activities.
  
• Maintaining pipeline health and monitoring product demand trends in collaboration with customers, planners, and sales teams.
  
• Building and maintaining strong customer relationships while providing outstanding service.
  

Required Qualifications

To be successful in this role, you should have:

• 6+ years of related experience in Customer Support, Program Management, or a similar customer-facing role.
  
• Experience working with SAP systems and ERP platforms.
  
• Strong analytical and problem-solving skills.
  
• Ability to manage multiple priorities in a fast-paced environment.
  
• Proficiency with Microsoft Office applications, including:
  
  
  
  • Excel
    
  • Word
    
  • Outlook
    
  • PowerPoint
    
  
  
  
• Experience analyzing reports and interpreting business data.
  
• Excellent organizational and time-management skills.
  

Preferred Qualifications

Highly qualified candidates may also possess:

• Experience in aerospace hardware sales.
  
• Knowledge of the aerospace or aviation industry.
  
• Outstanding written and verbal communication skills.
  
• Strong numerical reasoning and mathematical abilities.
  
• Experience supporting supply chain, spare parts, or aviation aftermarket operations.
  
• Proven ability to build and maintain long-term customer relationships.
  

Why Join Us?

At PDS Tech Commercial, we connect talented professionals with opportunities that make a real impact. This role offers the chance to work alongside an industry-leading aviation organization while contributing to the successful delivery of critical products and services that keep aircraft operating safely and efficiently.

What You'll Enjoy:

• Competitive pay starting at $19.38 per hour
  
• Stable Monday–Friday schedule with no anticipated overtime or travel requirements
  
• Opportunity to gain valuable experience supporting a global aviation operation
  
• Collaborative, team-oriented work environment
  
• Exposure to supply chain, customer operations, and aerospace industry best practices
  
• Professional growth and career development opportunities
  
• The chance to make a direct impact on customer satisfaction and operational success
  

Ready to Elevate Your Career?

If you're a driven customer service professional who thrives on solving problems, building relationships, and delivering exceptional results, we want to hear from you.

Apply today with PDS Tech Commercial and help deliver the service excellence that keeps the aviation industry moving forward.



This position requires use of information or access to facilities subject to the International Traffic in Arms Regulations (ITAR) and/or Export Administration Regulations (EAR). These regulations may limit access of controlled technologies: 1) to U.S. Persons, including U.S. Citizens, lawful permanent residents, and other narrow categories including refugees and asylees, or 2) to certain foreign nationals that have received an export license.                                               



 

• The California Fair Chance Act
• Los Angeles City Fair Chance Ordinance
• Los Angeles County Fair Chance Ordinance for Employers
• San Francisco Fair Chance Ordinance

Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Design What Flies — Become a Payload Systems Design Engineer in Aerospace Innovation

PDS Tech Commercial is partnering with a leading name in the aviation industry to hire a Payload Systems Design Engineer in North Charleston, SC. If you’re passionate about designing the systems that shape aircraft interiors, safety, and performance, this is your opportunity to make a real impact on next-generation aerospace programs.

 Role Overview: Your Impact

In this role, you’ll lead the design and integration of aircraft payload systems—from cabin interiors to cargo configurations and safety systems. Your work will influence the entire product lifecycle, ensuring innovative, compliant, and high-performing designs that meet both customer and regulatory expectations. You won’t just design components—you’ll help define the future of flight experiences.

 What You’ll Do — Day-to-Day Responsibilities

• Develop and document structural and interior payload system requirements to establish system designs
  
• Create and refine designs using 3D CAD tools (CATIA, SOLIDWORKS, etc.)
  
• Perform structural analysis and simulations, including FEM modeling to validate performance
  
• Lead testing strategies, including planning, execution, and analysis of validation tests
  
• Manage supplier relationships, supporting development, testing, and production activities
  
• Collaborate cross-functionally with engineering, production, and quality teams
  
• Support product lifecycle activities from concept and design through production and certification
  
• Investigate and integrate emerging technologies to drive innovation in aircraft design
  
• Ensure compliance with FAA/EASA regulations and certification standards
  
• Communicate design and technical updates clearly across all levels of the organization
  

 Required Qualifications

• Bachelor’s degree (or higher) in Engineering, Computer Science, Mathematics, Physics, Chemistry, or related STEM field
  
• 5+ years of aerospace engineering experience, including design and engineering release processes
  
• Hands-on experience with 3D modeling tools (e.g., CATIA, SOLIDWORKS, CREO, Autodesk Inventor)
  
• Experience working in cross-functional teams
  
• Strong analytical thinking and problem-solving skills
  

 Preferred Qualifications

• Degree in Mechanical, Aerospace, or Civil Engineering
  
• Experience with structural analysis and FEM tools
  
• Knowledge of FAA Title 14 Part 25 or EASA regulations
  
• Background in aircraft interiors, insulation systems, or cabin design
  
• Experience supporting production, quality investigations, and corrective actions
  
• Familiarity with supplier coordination and technical management
  
• Working knowledge of MS Office Suite
  
• Continuous improvement mindset and commitment to ongoing professional development
  

 Why Join Us

• Innovative Environment: Work on cutting-edge aerospace systems with a globally respected industry leader
  
• End-to-End Impact: Contribute across the full product lifecycle—from concept to certification
  
• Competitive Pay: Starting at $76.91/hour
  
• Career Growth: Expand your expertise in advanced design, analysis, and aerospace innovation
  
• Collaborative Culture: Partner with top engineering talent in a supportive, forward-thinking environment
  
• Meaningful Work: Help deliver aircraft systems that prioritize safety, performance, and customer experience
  

 Job Details at a Glance

• Title: Payload Systems Design Engineer
  
• Location: North Charleston, SC (Onsite)
  
• Schedule: Monday–Friday | 1st/2nd shift (8:30 AM – 5:00 PM)
  
• Type: Full-Time | 6-Month Consultant Role
  

 Ready to Help Define the Future of Flight? Apply Today

If you’re ready to bring your expertise in aerospace design to a role where innovation meets impact, we want to hear from you.

Apply now and take your engineering career to new heights.



This position requires use of information or access to facilities subject to the International Traffic in Arms Regulations (ITAR) and/or Export Administration Regulations (EAR). These regulations may limit access of controlled technologies: 1) to U.S. Persons, including U.S. Citizens, lawful permanent residents, and other narrow categories including refugees and asylees, or 2) to certain foreign nationals that have received an export license.                                               

 

• The California Fair Chance Act
• Los Angeles City Fair Chance Ordinance
• Los Angeles County Fair Chance Ordinance for Employers
• San Francisco Fair Chance Ordinance

Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Ready to lead innovative projects? Join PDS Tech as a Sr. Engineering Technician and make a lasting impact!
 
PDS Tech Commercial is seeking an experienced Senior Engineering Technician to join our team. This is your chance to apply your expertise in electro-mechanical systems and contribute to the efficiency and quality of our maintenance and production operations. If you are a proactive, detail-oriented professional with a strong background in electro-mechanical systems, blueprint analysis, and PCB rework, we want to hear from you!

Role Overview & Impact: As a Senior Engineering Technician, you'll be responsible for improving production efficiency, analyzing time and motion, and developing standard production rates for maintenance, production, and clerical operations. This role is integral to streamlining processes and ensuring high-quality output. You'll leverage your expertise in electrical schematics, J-standard soldering, and computer repairs, all while driving continuous improvement in a fast-paced environment.

Key Responsibilities:

• Efficiency Studies: Record time, motion, methods, and speed to improve efficiency and set standard production rates.

• Technical Expertise: Analyze blueprints and electrical schematics to ensure optimal function and performance.

• Soldering & PCB Rework: Perform J-standard soldering on new and reworked printed circuit boards (PCBs).

• Cable & Harness Manufacturing/Repair: Use your skills to fabricate and repair cables and harnesses.

• Computer Repairs & Test Box Fabrication: Repair and maintain computer systems and fabricate custom test boxes for testing and quality assurance.

• Leadership: Potentially lead and direct the work of others to accomplish complex tasks.

• Problem-Solving: Tackle complicated tasks and rely on your judgment and experience to achieve goals.

What We’re Looking For:

• Required Qualifications:

  • Experience: 4-6 years of relevant experience in electro-mechanical systems, blueprint analysis, and PCB work.

  • Education: High school diploma or equivalent.

  • Proficiency in J-standard soldering, PCB rework, cable and harness fabrication, and computer repairs.

  • Strong problem-solving and decision-making skills.

  • Familiarity with a variety of field concepts, practices, and procedures.

• Preferred Qualifications:

  • Experience leading a team or directing the work of others.

  • A proactive attitude with the ability to independently take initiative.

Why Join Us? At PDS Tech Commercial, we believe in fostering an environment that encourages growth, creativity, and innovation. By joining our team as a Senior Engineering Technician, you'll have access to:

• Competitive pay of $40/hr.

• Shift: 5:00am - 1:30pm PST

• Opportunity for growth with the chance to lead and influence processes.

• A dynamic, fast-paced environment where no two days are alike.

• The ability to work with cutting-edge technology and high-quality electro-mechanical systems.

• A collaborative work culture that values your contributions and encourages continuous improvement.

 
This position requires use of information or access to facilities subject to the International Traffic in Arms Regulations (ITAR) and/or Export Administration Regulations (EAR). These regulations may limit access of controlled technologies: 1) to U.S. Persons, including U.S. Citizens, lawful permanent residents, and other narrow categories including refugees and asylees, or 2) to certain foreign nationals that have received an export license.  
 

• The California Fair Chance Act
• Los Angeles City Fair Chance Ordinance
• Los Angeles County Fair Chance Ordinance for Employers
• San Francisco Fair Chance Ordinance

Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Build the Future of Flight: Fabrication Inspector

PDS Tech Commercial is partnering with a global aviation leader to find a skilled Fabrication Inspector who is ready to play a critical role in ensuring the safety, precision, and excellence of next-generation aircraft. If you’re passionate about quality and aerospace manufacturing, this is your opportunity to make a real impact.

 Position Overview

• Job Type: Full-Time

• Location: Wichita, KS

• Schedule: Monday–Friday (Must be available for 1st, 2nd, and 3rd shifts)

• Pay Rate: $44/hour

As an Inspector, you’ll serve as a vital gatekeeper of quality—ensuring that all fabrication and assembly processes meet strict aerospace standards. Your expertise helps guarantee that every part and system performs flawlessly in the sky.

 What You’ll Do

• Interpret engineering drawings, specifications, and inspection manuals to verify compliance

• Perform inspections using precision measuring tools and specialized equipment

• Evaluate fabrication/assembly processes and accept or reject parts and assemblies accordingly

• Ensure tools and equipment are qualified and properly maintained

• Maintain accurate quality records and documentation

• Write and manage Non-Conformance Reports (NCRs)

• Maintain required certifications and complete inspection training/testing

 Required Qualifications

• 5+ years of aerospace airframe assembly inspection experience

  • Fastener inspections (solid rivets, blind fasteners, lockbolts, hex-drive bolts, etc.)

• Strong blueprint reading and interpretation skills

• Proven ability to write NCRs (tags)

• Solid understanding of production processes and inspection procedures

• Strong written and verbal communication skills

• Reliable, punctual, and able to work flexible shifts and overtime

• Ability to obtain and maintain required certifications and inspection stamp

 Preferred Qualifications

• Previous experience with Aerospace

• 737 airframe/fuselage inspection experience

• Advanced familiarity with SAP systems

 Inspection Testing & Certification

Candidates must successfully complete written and practical testing, including:

• Assembly & Post-Assembly Sealing

• Electrical Bond & Ground Testing

• Precision Measuring Tools

• Skin Quality Inspection

Additional certification training includes:

• NCR creation in MES

• Fastener inspections (solid rivets, blind fasteners, lockbolts, hex-drive bolts, etc.)

• Composite fastener inspection

 Why Join Us?

• Work with Industry Leaders: Partner with top names in aviation manufacturing

• Competitive Pay: Earn $44/hour for your expertise

• Career Growth: Gain hands-on experience with advanced aerospace systems

• Dynamic Environment: Be part of a fast-paced, quality-driven team

• Skill Enhancement: Access training, certifications, and cutting-edge tools

At PDS Tech Commercial, we believe in empowering professionals to thrive in meaningful roles that push innovation forward.

 Take Your Career to New Heights

If you’re ready to bring your inspection expertise to a world-class aerospace program, we want to hear from you.

 Apply today and help shape the future of flight.

• The California Fair Chance Act
• Los Angeles City Fair Chance Ordinance
• Los Angeles County Fair Chance Ordinance for Employers
• San Francisco Fair Chance Ordinance

Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Shape the Future of Flight

Professional Engineering – Air Systems / Pneumatics

PDS Tech Commercial | Partnering with a Global Aviation Leader

Make Your Impact in Aerospace Innovation

PDS Tech Commercial is seeking a Professional Engineer – Air Systems/Pneumatics to support a leading name in the aviation industry. In this high-impact consulting role, you’ll help design, integrate, and validate critical pneumatic systems that keep modern aircraft operating safely and efficiently.

If you’re passionate about aerospace engineering and thrive on solving complex technical challenges, this is your opportunity to elevate your career while contributing to cutting-edge aircraft programs.

Location & Role Details

• Job Type: Full-Time Consultant (12-month assignment)
  
• Schedule: Monday–Friday
  
• Work Model: Hybrid (2–3 days onsite, subject to change)
  
• Locations: Montreal, Toronto, or service centers in Wichita, Hartford, Dallas, Opa Locka (FL), Tucson
  
• Pay Rate: Starting at $81.46/hour
  

What You’ll Do

As a key member of the engineering team, you will:

• Act as a systems engineer specializing in pneumatic systems
  
• Define system architecture, specifications, and requirements
  
• Lead integration and interface management across internal teams and suppliers
  
• Perform functional modeling, trade studies, and system performance analysis
  
• Ensure requirements validation, verification, and certification compliance
  
• Review and approve engineering deliverables (designs, test procedures, qualification and certification documents)
  
• Document technical analysis, ground and flight test results
  
• Support development and operation of test rigs and flight test platforms
  
• Troubleshoot system issues and support production and in-service operations
  
• Prepare design changes and optimization solutions
  
• Collaborate in a multi-disciplinary engineering environment
  
• Contribute to knowledge systems and engineering processes
  
• Manage technical relationships with suppliers
  
• Ensure adherence to program schedules and milestones
  

What You Bring

Required Qualifications

• Bachelor’s or Master’s degree in Mechanical or Aerospace Engineering
  
• 5–8 years of experience in an aerospace engineering environment
  
• Strong understanding of fluid flow and thermodynamics
  
• Proven analytical and problem-solving skills
  
• Familiarity with pneumatic systems and system integration disciplines
  
• Experience with component qualification standards (DO-160, MIL-STD-810)
  
• Knowledge of Design Assurance processes (ARP4754A)
  
• Experience in system modeling and performance testing
  
• Proficiency with MS Office tools
  
• Strong communication skills (written and verbal)
  
• Ability to work both technically and within project management contexts
  
• Willingness to travel for short assignments
  
• Bilingual (French & English)
  

Preferred Qualifications

• Experience with Model-Based Engineering or simulation tools
  
• Background working with cross-disciplinary aircraft systems (avionics, powerplant, installation)
  
• Demonstrated collaboration in high-performing engineering teams
  

Why Join Us

At PDS Tech Commercial, you’re not just taking a job—you’re advancing your career with purpose:

• Work with an industry-leading aerospace innovator shaping the future of aviation
  
• Gain exposure to high-profile aircraft programs and cutting-edge technologies
  
• Thrive in a collaborative, inclusive, and forward-thinking culture
  
• Enjoy a flexible hybrid work environment
  
• Competitive compensation with opportunities to expand your expertise
  
• Be part of a team that values innovation, excellence, and continuous learning
  

We believe in potential and passion—if you don’t meet every requirement, we still encourage you to apply.

Inclusion & Equal Opportunity

Our partner organization is committed to equal opportunity and inclusive hiring. Candidates from all backgrounds are encouraged to apply. Reasonable accommodations are available throughout the recruitment process.

Ready to Take Flight?

Bring your expertise to a team that’s redefining aerospace engineering.

Apply today and help engineer the systems that power tomorrow’s aircraft.

• The California Fair Chance Act
• Los Angeles City Fair Chance Ordinance
• Los Angeles County Fair Chance Ordinance for Employers
• San Francisco Fair Chance Ordinance

Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Build What Flies: Join Us as an Aerospace Assembler

Precision Work. Real Impact. A Career That Takes Off.

What You’ll Do Every Day

• Assemble and inspect components and products to ensure the highest quality standards
  
• Set up, operate, monitor, and change over production equipment
  
• Use microscopes for extended periods while handling small, intricate parts
  
• Follow engineering drawings, work instructions, and travelers
  
• Record, analyze, and report production and quality data
  
• Maintain a clean, safe, and efficient work area
  
• Comply with all safety rules and cleanroom protocols
  
• Participate in continuous improvement initiatives focused on safety, quality, and production
  
• Support the Operating System and site operational goals
  

What You Must Have

• English fluency (reading, writing, and speaking)
  
• Computer literacy
  
• 1+ year of manufacturing experience (within the past 5 years; 2–3+ year tenure preferred)
  
• Comfort and ability working in a cleanroom environment, including wearing a full body suit, face mask, eye protection, gloves, and anti-static bracelet
  
• Comfort using a microscope for hours at a time
  
• Strong hand-eye coordination, fine motor skills, and manual dexterity
  

What We Value (Preferred Qualifications)

• Experience using precision hand tools
  
• Ability to read blueprints, travelers, or technical documentation
  
• Troubleshooting skills
  
• Strong communication skills
  
• Ability to work both independently and collaboratively in a team environment
  

Compensation & Bonus:

• Pay Rate: $27.32/hour
  
• Subco Bonus Program – Earn up to $3,000!
  
  
  
  • $1,000 at 30 days
    
  • $1,000 at 60 days
    
  • $1,000 at 90 days
    
  • Total potential bonus: $3,000
    
  
  
  

Shift:

•  Shift: Monday–Thursday,  4x10, 3:00PM to 2:00AM.
  

Ready to Build the Future of Aerospace?

• The California Fair Chance Act
• Los Angeles City Fair Chance Ordinance
• Los Angeles County Fair Chance Ordinance for Employers
• San Francisco Fair Chance Ordinance

Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Write the Future of Aviation Innovation – Join Us as a Technical Writer, AI Documentation Specialist

Turn complex information into clear, impactful documentation while helping shape the future of aerospace technology.

PDS Tech Commercial is partnering with a leader in the aviation industry to hire a Technical Writer – AI Documentation Specialist for a fully remote opportunity. If you're passionate about technical communications, thrive on collaborating with cross-functional teams, and are excited about leveraging AI to enhance documentation quality and efficiency, this is your chance to make a meaningful impact.

Position Overview

Job Title: Technical Writer – AI Documentation Specialist

Job Type: Full-Time Consultant (12-Month Assignment)

Location: Remote

Schedule: Monday–Friday | 1st Shift | 8:00 AM – 5:00 PM

Pay Rate: $46.45 per hour

 

Make an Impact

Great documentation powers great organizations. As a Technical Writer – AI Documentation Specialist, you'll play a critical role in helping teams create, maintain, and improve essential documentation that supports operations, engineering, quality, supply chain, and business functions.

In this innovative role, you'll combine traditional technical writing expertise with modern AI-powered tools to develop clear, accurate, and user-friendly documentation that improves productivity, knowledge sharing, and operational excellence.

What You'll Do

As a Technical Writer, you will:

• Create, edit, and maintain a variety of technical documentation, including:
  
  
  
  • Procedures
    
  • Work Instructions
    
  • Forms
    
  • Templates
    
  • Guidance Documents
    
  
  
  
• Collaborate with subject matter experts across Quality, Engineering, Operations, Supply Chain, and Support teams to gather technical information.
  
• Leverage AI-powered tools such as Microsoft Copilot and similar platforms to accelerate content development, editing, summarization, and organization.
  
• Review, validate, and refine AI-generated content to ensure accuracy, completeness, and compliance with documentation standards.
  
• Develop and maintain documentation templates, style guides, and content governance practices.
  
• Organize and improve content within knowledge management systems.
  
• Identify opportunities to streamline documentation workflows through AI and automation technologies.
  
• Maintain documentation consistency and alignment with product releases, process changes, and organizational updates.
  
• Support documentation lifecycle management and version control activities.
  
• Drive continuous improvement initiatives that improve documentation quality and efficiency.
  

Required Qualifications

We're looking for professionals with:

• Bachelor's degree in Technical Communication, English, Computer Science, Information Systems, or a related field, or equivalent experience.
  
• 3+ years of professional technical writing experience.
  
• Demonstrated experience using AI tools to improve documentation development and editing workflows.
  
• Strong understanding of prompt engineering and best practices for AI-assisted content generation.
  
• Excellent written, verbal, and interpersonal communication skills.
  
• Proven ability to translate complex technical information into clear, concise, and user-friendly content.
  
• Exceptional attention to detail and commitment to quality and accuracy.
  
• U.S. Citizenship required.
  

Desired Technical Skills

Successful candidates will have experience with:

• Technical writing and editing
  
• AI-assisted content creation
  
• Prompt engineering
  
• Documentation lifecycle management
  
• Knowledge management systems
  
• Content governance
  
• Version control practices
  
• Documentation standards and best practices
  

Preferred Qualifications

Ideal candidates will also demonstrate:

• Experience supporting engineering, manufacturing, quality, or technical operations organizations.
  
• Strong analytical and organizational skills.
  
• Curiosity and enthusiasm for emerging AI technologies.
  
• Ability to balance automation with human judgment to produce high-quality documentation.
  
• A collaborative mindset and customer-focused approach to technical communications.
  

Why Join Us?

At PDS Tech Commercial, we're committed to connecting talented professionals with opportunities that drive innovation and career growth. This role offers a unique opportunity to work at the intersection of technical communication, artificial intelligence, and aerospace innovation.

What You'll Gain

• Competitive pay of $46.45 per hour
  
• Fully remote work environment
  
• Opportunity to work with cutting-edge AI technologies and documentation strategies
  
• Collaboration with industry-leading engineering, quality, operations, and supply chain teams
  
• Experience supporting a premier aviation organization
  
• Exposure to innovative knowledge management and content governance initiatives
  
• A culture that values curiosity, collaboration, innovation, and continuous improvement
  
• Meaningful work that helps improve operational excellence across critical aerospace programs
  

Ready to Elevate Technical Communication?

If you're a skilled technical writer who embraces innovation, excels at simplifying complex information, and is excited about the evolving role of AI in documentation, we want to hear from you.

Apply today with PDS Tech Commercial and help create the documentation that keeps aviation innovation moving forward.



This position requires use of information or access to facilities subject to the International Traffic in Arms Regulations (ITAR) and/or Export Administration Regulations (EAR). These regulations may limit access of controlled technologies: 1) to U.S. Persons, including U.S. Citizens, lawful permanent residents, and other narrow categories including refugees and asylees, or 2) to certain foreign nationals that have received an export license.                                               

 

• The California Fair Chance Act
• Los Angeles City Fair Chance Ordinance
• Los Angeles County Fair Chance Ordinance for Employers
• San Francisco Fair Chance Ordinance

Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Inspect Excellence. Build the Future of Aviation.

Join a Leading Aerospace Innovator as an Inspector in Clearwater, FL

Do you have a sharp eye for detail and a passion for quality? If you're experienced in IPC standards, solder inspection, and ensuring electronic assemblies meet the highest industry requirements, PDS Tech Commercial has an exciting opportunity for you.

We're partnering with a leader in the aviation and aerospace industry to hire an Inspector for a 12-month full-time consultant assignment in Clearwater, Florida. In this role, you'll play a critical part in ensuring the quality, reliability, and performance of electronic assemblies that support cutting-edge aerospace technologies.

Position Details

• Job Title: Inspector

• Location: Clearwater, FL

• Duration: 12-Month Consultant Assignment

• Schedule: Monday–Thursday | 4/10 Work Schedule | 2nd Shift

• Pay Rate: $26.00 per hour paid weekly

• Work Arrangement: Onsite

Make an Impact

Quality matters in aerospace, and every inspection counts. As an Inspector, you'll help ensure that circuit card assemblies meet stringent manufacturing and industry standards before they move forward in production. Your expertise will directly contribute to the safety, reliability, and success of mission-critical aviation technologies.

What You'll Do

Quality Inspection & Verification

• Perform detailed visual inspections of solder connections and conformal coating on circuit card assemblies.

• Verify compliance with IPC-A-610 and IPC-J-STD-001 requirements.

• Evaluate assemblies against industry standards and manufacturing specifications.

• Determine accept/reject criteria using IPC guidelines.

Technical Review

• Read and interpret:

  • Engineering drawings

  • Schematics and diagrams

  • Parts lists

  • Revision-controlled documentation

  • Inspection instructions and checklists

• Ensure assemblies conform to documented requirements.

Measurement & Documentation

• Utilize precision measuring equipment, including:

  • Dial indicators

  • Preset micrometers

  • Scales

  • Other inspection tools

• Maintain accurate quality documentation and inspection records.

• Report defects and nonconformances clearly and professionally.

Collaboration

• Work closely with manufacturing, engineering, and quality teams.

• Communicate quality concerns effectively across all levels of operations.

• Support a culture of continuous improvement and product excellence.

Required Qualifications

Experience

• Minimum 2 years of experience visually inspecting solder connections on:

  • Surface mount components

  • Plated through-hole components

• Experience performing conformal coating inspections.

• Hands-on experience working to:

  • IPC-A-610 standards

  • IPC-J-STD-001 standards

Important: IPC-A-610 and IPC-J-STD-001 experience must be clearly reflected on your resume.

Technical Skills

• Strong visual inspection skills.

• Ability to navigate IPC standards and determine accept/reject criteria.

• Experience using measuring and inspection equipment.

• Ability to read and interpret engineering drawings and technical documentation.

• Strong documentation and recordkeeping skills.

• Computer proficiency, including basic office applications.

Soft Skills

• Exceptional attention to detail.

• Strong verbal and written communication skills.

• Proven ability to work effectively as part of a team.

• Ability to professionally communicate quality issues and findings.

Additional Requirements

• Must successfully pass a required medical examination.

• Ability to work onsite on 2nd shift.

• Ability to follow detailed procedures and work instructions.

Preferred Qualifications

• Experience in aerospace, aviation, defense, or other highly regulated manufacturing environments.

• Additional certifications related to electronics inspection or quality assurance.

• Experience working with revision-controlled manufacturing documentation.

• Familiarity with electronic assembly manufacturing processes beyond inspection.

Why Join Us?

At PDS Tech Commercial, we connect talented professionals with opportunities that make a difference. When you join our team, you'll work alongside industry leaders developing innovative technologies that help shape the future of aviation and aerospace.

What You'll Gain

• Competitive pay of $19.00 - $28.00 per hour

• Opportunity to support a leading aerospace organization

• Consistent 4-day workweek (Monday-Thursday)

• Exposure to advanced aviation technologies and manufacturing processes

• Collaborative, quality-focused work environment

• Opportunity for full-time hire consideration

• Career-building experience with a respected industry leader

Ready to Put Your Inspection Expertise to Work?

If you have a strong background in IPC standards, electronics inspection, and quality assurance, this is your opportunity to advance your career while supporting technology that takes flight.

Apply today and join PDS Tech Commercial in delivering the precision, quality, and reliability that define aerospace excellence.

• The California Fair Chance Act
• Los Angeles City Fair Chance Ordinance
• Los Angeles County Fair Chance Ordinance for Employers
• San Francisco Fair Chance Ordinance

Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Lead Digital Thread Transformation in Aerospace Engineering as a Sr Systems Engineer with PDS Tech!

Pay Rate: $101.00/hr

 

We’re seeking highly experienced Sr Systems Engineers to architect, implement, and maintain a cutting-edge engineering lifecycle ecosystem supporting safety-critical aerospace systems.

In this role, you’ll serve as a technical authority responsible for integrating systems engineering data across the enterprise—connecting requirements, design, testing, and manufacturing within a fully traceable Digital Thread.

This is a senior-level opportunity for experts in IBM ELM, Requirements-Based Engineering (RBE), and aerospace compliance frameworks.

 Core Expertise Required

• Deep expertise with IBM ELM Suite (DOORS NG, EWM, ETM)
  
• Strong experience with Digital Thread architecture and enterprise integration
  
• Knowledge of ARP4754, DO-178C, DO-254 standards
  
• Experience integrating ELM with PLM tools (Teamcenter, Windchill, 3DEXPERIENCE)
  

 What You’ll Do

 Digital Thread & Enterprise Integration

• Design and maintain integrations between IBM ELM and enterprise systems (PLM, CAD, ERP, MES)
  
• Build linked data pipelines using:
  
  
  
  • OSLC (Open Services for Lifecycle Collaboration)
    
  • REST APIs
    
  • Middleware solutions (IBM Engineering Lifecycle Optimization)
    
  
  
  
• Establish data synchronization strategies to ensure a single source of truth
  
• Link systems engineering data to physical product structures (As-Designed / As-Built BOMs)
  

 Compliance & Safety Engineering

• Align workflows with ARP4754 aerospace development standards
  
• Track Development Assurance Levels (DAL A–E) across systems
  
• Generate automated traceability and verification matrices for audits
  

 IBM ELM Administration & Architecture

• Administer and configure the IBM ELM suite, including:
  
  
  
  
  • DOORS Next Gen (DOORS NG)
    
  • Engineering Workflow Management (EWM)
    
  • Engineering Test Management (ETM)
    
  • Rhapsody, GCM, and JTS
    
  
  
  
• Configure workflows, permissions, and project environments
  
• Troubleshoot performance and maintain platform stability
  

 Workflow, Testing & Configuration Management

• Align ETM with Requirements-Based Engineering workflows
  
• Manage defects, change requests, and sprint planning in EWM
  
• Ensure compliance with industry and regulatory standards
  

 Customization & Reporting

• Develop automation scripts and integrations (JavaScript, Python, APIs)
  
• Build enterprise dashboards and reporting frameworks (Power BI, Tableau, BIRT)
  
• Deliver automated reporting for compliance tracking and performance metrics
  

 Required Qualifications

• Bachelor’s or Master’s degree in Aerospace, Systems, Computer Science, or related field
  
• 5+ years of experience in systems/software engineering tools and lifecycle management
  
• Hands-on experience with IBM ELM ecosystem
  
• Strong background in Requirements-Based Engineering (RBE) and/or MBSE
  
• Proven experience integrating ELM with PLM systems (Teamcenter, Windchill, etc.)
  
• Deep understanding of safety-critical aerospace standards (ARP4754, DO-178C, DO-254)
  
• Strong scripting and automation experience (REST APIs, OSLC, Python/JavaScript)
  
• Excellent communication and stakeholder management skills
  

 Preferred Qualifications

• IBM ELM certifications (e.g., IBM Certified Specialist)
  
• Experience with Digital Thread strategies in aerospace or defense
  
• Familiarity with Agile, SAFe, and Waterfall methodologies
  
• Experience building enterprise-scale analytics and reporting solutions
  

What Makes You a Strong Fit

• Strategic thinker with ability to connect systems engineering across the enterprise
  
• Strong technical leadership with a focus on data integration and traceability
  
• Ability to balance compliance requirements with engineering innovation
  
• Self-driven with the ability to own complex architectures end-to-end
  

 Why Join This Opportunity?

• Lead Digital Thread transformation in a cutting-edge aerospace environment
  
• Work on mission-critical systems with full lifecycle traceability
  
• High-impact role bridging engineering, data, and enterprise architecture
  
• Collaborate with top experts in systems engineering and aerospace innovation
  
• Premium pay aligned with niche technical expertise
  

Ready to Architect the Future of Aerospace Engineering?

If you’re an expert in IBM ELM, Digital Thread integration, and aerospace systems engineering, apply today and take on a role with unmatched technical impact.



This position requires use of information or access to facilities subject to the International Traffic in Arms Regulations (ITAR) and/or Export Administration Regulations (EAR). These regulations may limit access of controlled technologies: 1) to U.S. Persons, including U.S. Citizens, lawful permanent residents, and other narrow categories including refugees and asylees, or 2) to certain foreign nationals that have received an export license.        

 

• The California Fair Chance Act
• Los Angeles City Fair Chance Ordinance
• Los Angeles County Fair Chance Ordinance for Employers
• San Francisco Fair Chance Ordinance

Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Measure What Matters – Build Precision into Flight as a Dimension Control Technician

PDS Tech Commercial is partnering with a premier aviation and aerospace leader to hire a skilled Dimension Control Technician in Palmdale, CA. If you’re passionate about precision, tooling, and building complex systems to exact tolerances, this is your opportunity to play a critical role in shaping the future of aerospace manufacturing.

About the Role

As a Dimension Control Technician, you will ensure the accuracy and integrity of tooling and assemblies that are essential to aircraft production. Your work directly impacts quality, safety, and performance—helping deliver reliable, high-performance aircraft. This is a hands-on, highly technical role where precision and craftsmanship are key.

What You’ll Do

In this role, you will:

• Lay out, fabricate, and assemble complex jigs, fixtures, and tooling systems with tight tolerances

• Interpret tool design drawings—or create your own—to plan work methods and sequences

• Work with compound angles and intricate contours to ensure alignment across multiple planes

• Set up and operate optical instruments to verify alignment, fit, and adjustments

• Design and develop holding devices, jigs, and fixture components

• Create shop drawings and operational plans for fabrication and assembly teams

• Monitor product quality using statistical process controls and other inspection methods

• Collaborate with engineering and production teams to ensure tooling meets design and manufacturing requirements

What You Bring

Required Qualifications

• Experience working with tooling, jigs, fixtures, and precision measurement systems

• Ability to interpret and work from technical drawings and specifications

• Strong understanding of alignment, measurement, and tolerance control

• Experience operating optical measurement instruments

• Proven ability to plan work, determine methods, and execute independently

• Strong attention to detail and commitment to quality

Preferred Qualifications

• Background in aerospace tooling or manufacturing environments

• Experience with complex contours, compound angles, and multi-plane alignment

• Familiarity with statistical process control (SPC) or quality verification processes

• Ability to design tooling components and improve existing processes

Why Join Us

At PDS Tech Commercial, you’ll work on cutting-edge aerospace programs with a company known for innovation and excellence.

Here’s what makes this opportunity stand out:

• Competitive pay at $43.00 per hour

• 4x10 schedule (Monday–Thursday, First Shift) – enjoy long weekends every week

• Per diem offered based on GSA rates, managed through Concur

• Work alongside industry experts on advanced aerospace tooling and production systems

• Be part of a culture built on precision, collaboration, and continuous improvement

Your Impact Starts Here

This role is critical to ensuring aircraft are built with the highest level of precision. Your expertise in dimension control will help maintain quality standards and support the successful production of advanced aerospace systems.

Apply Today

If you’re ready to bring your skills to a role where precision meets innovation, we want to hear from you.

Apply now and help build the future of aerospace—one exact measurement at a time.

This position requires use of information or access to facilities subject to the International Traffic in Arms Regulations (ITAR) and/or Export Administration Regulations (EAR). These regulations may limit access of controlled technologies: 1) to U.S. Persons, including U.S. Citizens, lawful permanent residents, and other narrow categories including refugees and asylees, or 2) to certain foreign nationals that have received an export license.                                               
 

• The California Fair Chance Act
• Los Angeles City Fair Chance Ordinance
• Los Angeles County Fair Chance Ordinance for Employers
• San Francisco Fair Chance Ordinance

Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Lead the Future of Aerospace Propulsion Systems as a Principal Systems Engineer with PDS Tech!

Pay Rate: $93.00/hr

We’re seeking a highly experienced Principal Systems Engineer to serve as a technical leader within a propulsion engine control systems group. In this role, you’ll drive the development, integration, and performance of advanced engine control systems across a portfolio of gas turbine engines.

This is a high-impact, senior-level opportunity for someone passionate about propulsion systems, controls engineering, and requirements-driven development, with the ability to influence both technology and teams.

 What You’ll Bring (Top Expertise Required)

• Proven experience working within Aerospace Engines & Power Systems environments
  
• Deep expertise in propulsion engine control systems
  
• Strong background in requirements-based systems engineering for controls
  

 What You’ll Do

Requirements Engineering Leadership

• Lead requirements-based engineering efforts, including:
  
  
  
  
  • Requirements analysis, decomposition, and validation
    
  • Verification and change management
    
  
  
  
• Define and refine engine control system and component-level requirements
  

System & Component Development

• Contribute to the design and development of engine control systems and hardware components
  
• Support integration across multi-disciplinary engineering teams
  

Technical Leadership & Strategy

• Serve as a technical focal point for internal stakeholders and leadership
  
• Mentor and support junior engineers
  
• Drive strategic reuse of system requirements and features across programs
  
• Influence improvements in development cost, efficiency, and timelines
  

Collaboration & Program Execution

• Coordinate with:
  
  
  
  • Chief engineers and technical experts
    
  • Program management teams
    
  • Internal and external customers
    
  
  
  
• Provide supplier technical oversight and project coordination
  
• Support Agile development processes and program planning
  
• Assist with field issue troubleshooting and system support
  

 Required Qualifications

• Bachelor’s degree in Engineering or STEM discipline
  
• 10+ years of professional engineering experience
  
• Strong background in propulsion control systems and requirements engineering
  
• Experience working within aerospace or engine systems environments
  
• Ability to lead complex technical efforts and influence stakeholders
  

 Preferred Qualifications

• Experience with gas turbine engines or internal combustion engine controls
  
• Familiarity with:
  
  
  
  • ARP4754A (Systems Development)
    
  • DO-178C (Software Certification)
    
  
  
  
• Knowledge of control systems and supporting hardware components
  
• Experience in program/project engineering and customer interfacing
  
• Proven ability to work in cross-functional, global teams
  

 What Makes You a Strong Fit

• Strong analytical thinker with the ability to quickly apply new concepts
  
• Experienced in managing complex technical challenges and multiple priorities
  
• Self-motivated with the ability to work independently and lead initiatives
  
• Confident decision-maker with strong engineering judgment
  
• Effective communicator who can collaborate across technical and leadership teams
  

 Why Join This Opportunity?

• Play a key role in shaping next-generation propulsion control systems
  
• Work on mission-critical aerospace technologies
  
• Serve as a technical leader and mentor in a high-visibility role
  
• Collaborate with top engineers, industry experts, and global teams
  
• Competitive pay aligned with deep technical expertise
  

 Ready to Lead at the Cutting Edge of Aerospace?

If you’re a highly experienced propulsion systems engineer ready to drive innovation, lead teams, and make a measurable impact, apply today and take your career to new heights.



This position requires use of information or access to facilities subject to the International Traffic in Arms Regulations (ITAR) and/or Export Administration Regulations (EAR). These regulations may limit access of controlled technologies: 1) to U.S. Persons, including U.S. Citizens, lawful permanent residents, and other narrow categories including refugees and asylees, or 2) to certain foreign nationals that have received an export license.             



 

• The California Fair Chance Act
• Los Angeles City Fair Chance Ordinance
• Los Angeles County Fair Chance Ordinance for Employers
• San Francisco Fair Chance Ordinance

Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Drive Engineering Excellence on Mission-Critical Defense Programs as a Project Engineer with PDS Tech!

Pay Rate: $41.54/hr

 

We’re seeking a motivated and technically skilled Project Engineer to support the US Army’s Total Integrated Engine Revitalization (TIGER) program—focused on the AGT1500 turboshaft engine powering the M1 Abrams Main Battle Tank.

In this role, you’ll lead engineering projects, collaborate with government stakeholders, and ensure successful delivery of complex aerospace initiatives.

 What You’ll Do

Project Leadership & Execution

• Lead and manage engineering projects from initiation through completion
  
• Define scope, objectives, and deliverables in collaboration with stakeholders
  
• Develop and execute project plans, including timelines, budgets, and resource allocation
  
• Ensure projects are delivered on time, within scope, and within budget
  

 Cross-Functional Collaboration

• Coordinate across teams including:
  
  
  
  • Field Service Engineers
    
  • Overhaul Support Engineers
    
  • Technical specialists and program teams
    
  
  
  
• Work directly with U.S. Army stakeholders, including:
  
  
  
  • Technical Representatives
    
  • Product Managers
    
  • Senior military leadership
    
  
  
  

 Monitoring & Reporting

• Track project progress and ensure adherence to timelines, budgets, and quality standards
  
• Identify risks and develop mitigation strategies
  
• Prepare and present project status updates to leadership and stakeholders
  

 Technical Support & Problem Solving

• Provide technical guidance to project teams
  
• Support risk management and issue resolution
  
• Drive continuous improvement and operational excellence
  

 Required Qualifications

• Bachelor’s degree in Engineering or STEM-related discipline
  
• 2+ years of experience in project engineering or technical project roles
  
• Proven experience managing cost, schedule, and scope for engineering projects
  
• Strong leadership, communication, and teamwork skills
  
• Experience with project management tools and methodologies
  
• Ability to work in a fast-paced, dynamic environment
  
• Strong problem-solving and risk management capabilities
  

 What Makes You a Strong Fit

• Strong foundation in engineering and project execution
  
• Ability to work with both technical teams and government stakeholders
  
• Detail-oriented with strong organizational and communication skills
  
• Proactive and adaptable in high-visibility, mission-critical programs
  

 Why Join This Opportunity?

• Contribute to a high-impact U.S. Army defense program
  
• Work on critical propulsion systems for military platforms
  
• Gain exposure to cross-functional aerospace engineering teams
  
• Hybrid work flexibility with strong team collaboration
  
• Competitive pay aligned with project engineering experience
  

 Ready to Support Mission-Critical Aerospace Projects?

If you’re an engineer with project experience and a passion for defense and aerospace programs, apply today and play a key role in delivering critical solutions.



This position requires use of information or access to facilities subject to the International Traffic in Arms Regulations (ITAR) and/or Export Administration Regulations (EAR). These regulations may limit access of controlled technologies: 1) to U.S. Persons, including U.S. Citizens, lawful permanent residents, and other narrow categories including refugees and asylees, or 2) to certain foreign nationals that have received an export license.              

 

• The California Fair Chance Act
• Los Angeles City Fair Chance Ordinance
• Los Angeles County Fair Chance Ordinance for Employers
• San Francisco Fair Chance Ordinance

Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Unlock Your Future with PDS Tech Commercial: Become a Key Player in Avionics Systems Modeling in Phoenix, AZ!

Pay Rate $63.72 - $68.18
 

Build intelligent avionics systems that define how pilots and aircraft see, sense, and respond.

 About the Role

We’re seeking a talented Sr Advanced Systems Engineer to support the development, integration, and verification of Aircraft State and Aircraft Systems Monitoring & Synoptics applications for a Next Generation Avionics Platform. In this role, you’ll work at the intersection of systems engineering, embedded platforms, and avionics software—contributing to safety critical systems that directly impact aircraft operation and situational awareness.

This is a hybrid role, offering a balance of onsite collaboration and remote flexibility.

 What You’ll Do Day to Day

As part of a multidisciplinary avionics team, you will:

• Develop, integrate, and verify aircraft state and systems monitoring applications

• Support systems and software requirements development, validation, integration, and verification

• Apply Model Based Systems Engineering (MBSE) principles to design and analyze avionics functionality

• Create and maintain system models, preferably using Simulink

• Develop avionics display graphics using ARINC 661, with tools such as Scade

• Integrate and interface with aircraft sensors and subsystems, including:

  • Air Data systems

  • AHRS and GPS navigation sensors

  • Flaps, landing gear, cabin pressure, and FADEC systems

• Collaborate closely with systems, software, hardware, and test teams to ensure end to end system integrity

Required Qualifications (Top Must Have Skills)

• Bachelor’s degree in Engineering or Computer Science

• Experience in Model Based Systems Engineering (MBSE)

• Background in avionics systems and embedded systems

• Experience with systems or software requirements development, integration, or verification

• Familiarity with aircraft systems, sensors, and avionics architectures

 Preferred Experience

• Model based design using Simulink

• ARINC 661 graphics development, preferably using Scade

• Experience with aircraft position and navigation sensors (Air Data, AHRS, GPS)

• Hands on exposure to aircraft systems integration (flight controls, propulsion, environmental systems)

• Experience working in regulated or safety critical environments

 Why Join Us?

This role offers a chance to work on technology that directly shapes the future of aviation.

• Contribute to next generation avionics platforms used in real aircraft

• Work in a collaborative, engineering driven culture that values rigor and innovation

• Apply both systems thinking and hands on technical skills

• Enjoy a hybrid work model that supports flexibility and focus

• Grow your expertise in safety critical, mission impacting systems

 Ready to Take Flight?

If you're passionate about avionics, model?based design, and building systems that pilots trust every day, we’d love to hear from you.

 Apply now and help define the future of aircraft systems and avionics innovation.

This position requires use of information or access to facilities subject to the International Traffic in Arms Regulations (ITAR) and/or Export Administration Regulations (EAR). These regulations may limit access of controlled technologies: 1) to U.S. Persons, including U.S. Citizens, lawful permanent residents, and other narrow categories including refugees and asylees, or 2) to certain foreign nationals that have received an export license.

• The California Fair Chance Act
• Los Angeles City Fair Chance Ordinance
• Los Angeles County Fair Chance Ordinance for Employers
• San Francisco Fair Chance Ordinance

Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Design the Future of Flight – Structural Engineer Opportunity in Aerospace

PDS Tech Commercial is partnering with a premier leader in the aviation industry to find an experienced Structural Engineer ready to tackle complex challenges and help shape the next generation of aerospace innovation. If you excel at solving high-level engineering problems and want your work to directly impact mission-critical aircraft systems, this is your opportunity to make a lasting difference.

Position Overview

• Job Title: Structural Engineer

• Location: Melbourne, FL 32901

• Job Type: Full-Time Consultant (6-Month Contract, Contract-to-Hire Intent)

• Schedule: Monday–Friday | 1st Shift (9/80A) 7:30 AM – 5:00 PM

• Pay Rate: $71.54 – $111.22 per hour

• Work Arrangement: Onsite 

In this high-impact role, you will lead advanced structural analysis efforts for aircraft systems, ensuring safety, performance, and compliance in a cutting-edge aerospace environment.

What You’ll Do

As a Structural Engineer, your expertise will drive critical engineering outcomes:

• Perform static, dynamic, and durability/damage tolerance (DaDT) analysis for metallic and composite airframe structures

• Analyze mechanical systems and aircraft equipment using both hand calculations and advanced automated tools

• Derive and apply non-flight and applied loads, supporting design and validation processes

• Create, extract, and distribute internal loads using tools such as FEMAP, NX, and Teamcenter

• Collaborate closely with multidisciplinary teams to achieve program objectives

• Prioritize and manage multiple high-level engineering tasks simultaneously

• Evaluate complex technical challenges and develop innovative, practical solutions

• Contribute to design improvements that enhance aircraft performance and reliability

What You Bring

Required Qualifications

• One of the following:

  • Bachelor’s degree in STEM with 12+ years of aerospace structural analysis experience

  • Master’s degree in STEM with 10+ years of relevant experience

  • PhD in STEM with 7+ years of relevant experience

• Strong background in aerospace structural analysis (metallic and composites)

• Experience with industry tools such as FEMAP, NX, and Teamcenter

• Proven ability to analyze complex systems and deliver solutions in a fast-paced environment

• Strong collaboration and communication skills

• Must be eligible to obtain a Security Clearance.

Preferred Qualifications

• Experience in defense or high-security aerospace programs

• Familiarity with advanced simulation methods and load development

• Demonstrated leadership on large-scale engineering projects

Why Join Us?

At PDS Tech Commercial, we connect exceptional engineering talent with opportunities that matter. When you join this team, you’ll benefit from:

• Top-tier compensation in a highly specialized field

• The opportunity to work with a world-class aviation and defense leader

• Exposure to cutting-edge aerospace technologies and methodologies

• A collaborative, innovation-driven culture focused on excellence

• A potential pathway to a long-term, full-time engineering career

• The chance to make a tangible impact on systems that support national and global security

This is more than a contract—it’s a gateway to shaping the future of aerospace engineering.

Ready to Elevate Your Engineering Career?

If you’re a seasoned Structural Engineer ready to take on complex challenges and contribute to industry-leading innovation, we want to hear from you.

Apply today and bring your expertise to the forefront of aviation excellence with PDS Tech Commercial.

This position requires use of information or access to facilities subject to the International Traffic in Arms Regulations (ITAR) and/or Export Administration Regulations (EAR). These regulations may limit access of controlled technologies: 1) to U.S. Persons, including U.S. Citizens, lawful permanent residents, and other narrow categories including refugees and asylees, or 2) to certain foreign nationals that have received an export license.                                               
 

• The California Fair Chance Act
• Los Angeles City Fair Chance Ordinance
• Los Angeles County Fair Chance Ordinance for Employers
• San Francisco Fair Chance Ordinance

Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Build Precision That Powers Aviation

Technician – Advanced Assembly

PDS Tech Commercial | Supporting a Leader in the Aviation Industry

Make an Impact Where Precision Matters Most

PDS Tech Commercial is hiring a Technician to support cutting-edge aerospace manufacturing and development. In this role, your precision and attention to detail will directly contribute to the reliability and performance of components used in advanced aviation systems.

If you excel at working with miniature components and thrive in highly technical environments, this is your opportunity to play a critical role in building the future of flight.

Role Details

• Location: Niagara Falls, NY
  
• Pay Rate: $24.00 per hour
  
• Duration: 12-month assignment
  
• Schedule: 1st Shift (4/10 schedule)
  

What You’ll Do

In this hands-on technical role, you will:

• Perform electronic and electro-mechanical assembly for production, prototype, and development units
  
• Work with microscopes to assemble miniature, high-precision components
  
• Conduct modifications, rework, and quality testing on assemblies
  
• Adapt to changing part conditions and detailed inconsistencies
  
• Collaborate closely with engineering and manufacturing teams
  
• Support preproduction and product development efforts where documentation may be limited
  
• Maintain a high level of accuracy, quality, and consistency in all assembly work
  

What You Bring

Required Qualifications

• Experience using a microscope for assembly work
  
• Strong visual acuity and exceptional attention to fine detail
  
• Experience handling miniature precision components
  
• Excellent hand-eye coordination
  
• Technical mindset with a detail-oriented approach
  
• Ability to adapt to variations in parts and assembly processes
  
• This position requires use of information or access to facilities subject to the International Traffic in Arms Regulations (ITAR) and/or Export Administration Regulations (EAR). These regulations may limit access of controlled technologies: 1) to U.S. Persons, including U.S. Citizens, lawful permanent residents, and other narrow categories including refugees and asylees, or 2) to certain foreign nationals that have received an export license.                                               
  
   
  

• Experience working in an ISO or cleanroom environment
  
• IPC J-STD-001 solder certification
  
• 3+ years of experience in one or more of the following:
  
  
  
  • SMT (Surface Mount Technology), rework, repair, assembly
    
  • PCB assembly and rework
    
  • Medical device assembly
    
  • Jewelry making or watch repair (micro-precision work)
    
  
  
  

Candidates with strong microscope-based experience in related fields are encouraged to apply.

Why Join Us

At PDS Tech Commercial, you’ll be part of something bigger:

• Work alongside a top-tier aviation industry leader
  
• Gain experience with advanced aerospace technologies and manufacturing
  
• Be part of a collaborative, hands-on technical team
  
• Opportunity to expand your skills in a high-demand precision field
  
• Consistent schedule with a 4/10 workweek for better work-life balance
  
• A culture that values quality, craftsmanship, and continuous improvement
  

We value dedication and skill—if you have strong related experience, we want to hear from you.

Ready to Take the Next Step?

Bring your precision and technical expertise to a role where your work truly matters.

Apply today and help build the components that keep the aviation industry moving forward

• The California Fair Chance Act
• Los Angeles City Fair Chance Ordinance
• Los Angeles County Fair Chance Ordinance for Employers
• San Francisco Fair Chance Ordinance

Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Drive the Flow of Success – Join PDS Tech and become a Material Handler and Make an Impact in Phoenix, AZ!
 
Are you looking for an exciting opportunity to grow your career in a dynamic environment? PDS Tech Commercial is seeking dedicated Warehouse Material Handlers to join our team. In this essential role, you will be directly responsible for ensuring materials are efficiently moved through our warehouse, contributing to the smooth flow of operations and ensuring that our teams are always prepared. Your contributions will have a significant impact on our success, and we want you to be a part of that!
 
What You’ll Do
As a Warehouse Material Handler, you’ll be involved in various tasks, including:

• Loading and unloading materials from trucks, trains, or aircraft using equipment such as hand trucks, forklifts, hoists, and conveyors.

• Safely and efficiently transporting materials within the storage facility to designated areas.

• Maintaining organization and ensuring materials are in the correct locations.

• Following established guidelines and instructions to carry out daily responsibilities.

• Supporting overall warehouse operations to help meet team goals and timelines.

 
Key Qualifications
Required:

• High school diploma or equivalent preferred.

• 1-2 years of experience in warehousing, logistics, or a related field.

• Ability to operate material handling equipment, including forklifts (training may be provided).

• Strong attention to safety and ability to follow established procedures.

• Dependability and commitment to working with a positive attitude.

 
Preferred:

• Experience in a warehouse or distribution center setting.

• Basic understanding of warehouse operations and material handling procedures.

• Ability to work in a fast-paced, team-oriented environment.

 
Why Join Us?
At our company, we believe that the success of our business depends on the success of our people. We offer:

• A supportive work environment: Join a collaborative, motivated team that values your contributions and fosters growth.

• A path to growth: With hands-on training and advancement opportunities, you’ll have the chance to develop your skills and take on more responsibilities.

• Generous bonus program: Eligible employees can earn up to $3,000 in bonuses based on performance and perfect attendance!

• Competitive pay: Start with an hourly rate of $18.00/hr on 2nd Shift -2:30pm - 11pm

• Benefits package: We offer great benefits that prioritize your health, well-being, and financial security.

We’re excited to bring you on board and provide a fulfilling job experience that allows you to grow, succeed, and make a real difference in our organization!
 
Ready to Apply?
If you’re eager to make a difference and take the next step in your career, we’d love to hear from you. Click "Apply Now" and start your journey with us today!
Let’s work together to achieve greatness. We can’t wait to see what you bring to the team!
 
This position requires use of information or access to facilities subject to the International Traffic in Arms Regulations (ITAR) and/or Export Administration Regulations (EAR). These regulations may limit access of controlled technologies: 1) to U.S. Persons, including U.S. Citizens, lawful permanent residents, and other narrow categories including refugees and asylees, or 2) to certain foreign nationals that have received an export license.          
 

• The California Fair Chance Act
• Los Angeles City Fair Chance Ordinance
• Los Angeles County Fair Chance Ordinance for Employers
• San Francisco Fair Chance Ordinance

Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Senior Field Technician – PDS Tech Commercial

Atlanta, GA | $45–$55/HR | Monday–Friday, 7am–4pm

Power the Future of Connectivity. Build the Networks That Move the World.

PDS Tech Commercial is partnering with a global telecommunications innovator that is transforming how people, businesses, and entire cities connect. As a Senior Field Technician, you won’t just install equipment—you’ll help shape the future of tomorrow’s gigabit networks.

This is your opportunity to take ownership in the field, work with the newest optical technologies, and play a vital role in deploying next-generation infrastructure across the region.

What You’ll Do

You’ll be the trusted expert on the ground, ensuring networks are built with precision and perform at their peak.
Your day-to-day impact includes:

• Installing, commissioning, and maintaining telecom equipment and infrastructure (fiber & copper) in real-world environments.

• Conducting detailed Datacenter and PoP audits—equipment, ports, cabling, connectivity.

• Performing advanced troubleshooting, fault isolation, and validation of optical fiber systems.

• Executing insertion loss, OTDR, BER, and other key network performance tests.

• Partnering with senior network engineers remotely to configure and verify deployed systems.

• Documenting your work with accuracy, clarity, and accountability.

• Ensuring safety and industry compliance at every site.

• Providing timely status reports and communicating risks proactively.

• Supporting after-hours cutovers or migrations when mission-critical work demands it.

Required Skills & Experience

You’ll succeed here if you bring strong technical chops and a hands-on mindset:

• Equipment & port auditing

• Fiber & cable tracing

• Fiber traffic identifier tests

• Visual Fault Locator use

• Rack & equipment installation (active + passive)

• PDU installation

• CATx & fiber cabling

• DC & AC power termination

• Copper cable terminations

• Software updates & equipment configuration

• Standalone equipment testing

• Insertion loss, OTDR, and BER testing

• Solid fault-finding abilities

• Ability to compile clean, professional test reports

Preferred Skills (Boost Your Candidacy)

• Equipment commissioning

• Wavelength adds & balancing

• Signal-to-noise ratio testing

• CD/PMD testing

• Use of OSA

• DWDM link/span build, test & commissioning

Vendor Experience that Stands Out

Ciena, Huawei, Nokia, Infinera, Lucent, Adva, Nortel systems.

Education & Additional Requirements

• Degree or diploma in Telecommunications, Electrical Engineering, Computer Science, or equivalent experience

• Hands-on experience in telecom exchanges or datacenter environments

• Knowledge of DWDM & OTN transmission systems

• Strong understanding of fiber principles (attenuation, dispersion, signal loss)

• Familiarity with DC/AC power systems

• Experience with OTDRs, power meters, multimeters, OSAs

• Strong documentation, communication, and troubleshooting abilities

• Independent, detail-oriented, and team-focused

• Valid driver’s license

• Willingness to travel as needed

Why You’ll Love Working With Us

Joining PDS Tech Commercial means stepping into a culture that values technical mastery, innovation, and real impact. Here, your field expertise becomes a force for progress—enabling faster speeds, smarter cities, and more connected communities.

You’ll enjoy:

• Competitive pay ($45–$55/hr)

• A stable Monday–Friday schedule (7am–4pm)

• A forward-thinking, collaborative environment

• Opportunities to grow your skills with cutting-edge tools and technologies

• The chance to influence major network deployments across the region

Your work won’t just be another job—it will help power the digital world for generations.

Ready to Build Something Bigger? Apply Today.

Step into a role where your technical skills truly matter.
Apply now and help drive the future of telecommunications.

• The California Fair Chance Act
• Los Angeles City Fair Chance Ordinance
• Los Angeles County Fair Chance Ordinance for Employers
• San Francisco Fair Chance Ordinance

Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Support Critical Materials Engineering and Analytical Testing and Advance Your Career as a Senior Laboratory Technician!

Pay Rate: $33.16/hr
Location: South Bend, IN

Contract to Perm position
 

PDS Tech Commercial is seeking an experienced Senior Laboratory Technician to join a Materials Engineering Laboratory supporting multiple analytical laboratories within a manufacturing and engineering environment. This role is ideal for a laboratory professional who enjoys hands-on testing, analytical instrumentation, materials characterization, and collaborating with customers to solve technical challenges.

You'll play a key role in supporting laboratory operations, coordinating testing priorities, operating advanced analytical instruments, and ensuring accurate and timely delivery of test results.

 What You'll Do

Laboratory Operations & Work Coordination

• Coordinate daily workload across the Chemistry, Carbon, and Metals Laboratories

• Receive and track incoming work through the Laboratory Information Management System (LIMS)

• Prioritize laboratory tasks to meet customer schedules and project deadlines

• Communicate testing status, priorities, and updates with customers and laboratory personnel

Chemistry & Materials Testing

• Perform titration analyses on production processing chemistries

• Conduct Salt Fog testing using established industry standards

• Perform:

  • Oxygen/Nitrogen/Hydrogen (ONH) analysis

  • Coined Density analysis

  • Fusion Boundary analysis of powder materials

• Conduct coating evaluations, including:

  • Viscosity

  • Refractive Index

  • Specific Gravity

  • Turbidity testing

Materials Characterization

• Prepare samples for X-Ray Diffraction (XRD) analysis

• Perform material cross-sectioning and metallography preparation

• Analyze samples using microscopy techniques

• Capture images and measurements using microscope software systems

Analytical Instrumentation

• Operate and maintain a variety of analytical instruments

• Troubleshoot laboratory equipment and testing systems

• Support calibration and routine maintenance activities

Customer Support & Documentation

• Interface with internal and external customers to determine appropriate testing methods

• Document and communicate test results accurately

• Generate reports utilizing Microsoft Office applications

• Maintain laboratory inventories, including:

  • Solvents

  • Acids

  • Bases

  • Chemicals

  • Laboratory consumables

 Required Qualifications

• High School Diploma or equivalent

• Minimum of 3 years of laboratory experience

• Experience working in a technical laboratory environment

• Strong organizational and communication skills

• Ability to work independently while managing multiple priorities

 Preferred Qualifications

• Experience performing:

  • Titrations

  • Wet chemistry

  • Metallography

  • Materials testing

• Familiarity with analytical instrumentation such as:

  • FTIR

  • TGA/DSC

  • ONH

  • SEM/EDS

  • XRD

  • XRF

  • Optical Microscopes

• Experience with hazardous chemicals, acids, bases, and solvents

• Ability to read and interpret engineering drawings and specifications

• Mechanical, machining, or manufacturing aptitude

• Experience working with Laboratory Information Management Systems (LIMS)

 Why Join Us?

At PDS Tech Commercial, we connect talented professionals with opportunities that challenge, develop, and advance their careers. In this role, you'll gain exposure to a wide range of materials analysis techniques and advanced laboratory instrumentation while supporting engineering and manufacturing operations.

What You'll Gain

• Competitive pay of $33.16/hr

• Opportunity to work with advanced analytical instruments

• Diverse testing responsibilities across multiple laboratories

• Exposure to materials engineering and manufacturing processes

• Collaborative environment with engineers, scientists, and customers

• Opportunity to expand your laboratory and materials characterization expertise

Apply Today!

If you're an experienced laboratory professional with strong analytical skills, hands-on chemistry experience, and a passion for materials testing, we want to hear from you.

Apply today and join PDS Tech Commercial as a Senior Laboratory Technician, where your expertise will help drive innovation, quality, and engineering excellence.

This position requires use of information or access to facilities subject to the International Traffic in Arms Regulations (ITAR) and/or Export Administration Regulations (EAR). These regulations may limit access of controlled technologies: 1) to U.S. Persons, including U.S. Citizens, lawful permanent residents, and other narrow categories including refugees and asylees, or 2) to certain foreign nationals that have received an export license. 
 

• The California Fair Chance Act
• Los Angeles City Fair Chance Ordinance
• Los Angeles County Fair Chance Ordinance for Employers
• San Francisco Fair Chance Ordinance

Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Power the Future of Space and Defense: Electronic Technician

Earn $77.92/Hour Supporting Advanced Launch and Interceptor Systems | Vandenberg Space Force Base, CA

Are you an electronics professional who thrives on solving technical challenges and supporting mission-critical systems?

PDS Tech Commercial is partnering with a leading innovator in the aviation and aerospace industry to hire an Electronic Technician 2 for a full-time, 6-month consultant opportunity at Vandenberg Space Force Base, California.

This is a unique opportunity to work hands-on with advanced interceptor and space launch vehicle systems, performing testing, troubleshooting, and integration activities that directly support groundbreaking aerospace and defense missions. If you're passionate about electronics, diagnostics, and cutting-edge technology, this role offers the chance to make a real impact.

Position Details

• Job Title: Electronic Technician 2
  
• Location: Vandenberg AFB, CA 93437
  
• Job Type: Full-Time Consultant (6-Month Assignment)
  
• Schedule: Monday–Friday
  
• Pay Rate: $77.92 per hour
  

Your Impact

As an Electronic Technician, you'll play a critical role within the Integration & Test (I&T) organization, supporting the development, testing, and validation of sophisticated electronic and electro-mechanical systems. Your expertise will help ensure critical technologies perform reliably and meet stringent engineering and operational requirements.

Working alongside engineers and technical specialists, you'll contribute to projects that support some of the most advanced aerospace and defense programs in the industry.

What You'll Do

Testing & Troubleshooting

• Perform routine testing, checkout, and troubleshooting of electronic and electro-mechanical systems.
  
• Conduct operational tests and fault isolation activities to verify compliance with design specifications.
  
• Diagnose and resolve electronic malfunctions down to the component level.
  
• Collect and document test data to support engineering evaluations.
  

System Assembly & Modification

• Support fabrication, assembly, modification, and integration of prototype and developmental electronic systems.
  
• Build and verify electronic assemblies, harnesses, and subsystem components.
  
• Assist with environmental testing and development-related engineering activities.
  

Technical Analysis

• Interpret and work from:
  
  
  
  • Electronic schematics
    
  • Wiring diagrams
    
  • Technical drawings
    
  • Layouts
    
  • Written and verbal work instructions
    
  
  
  
• Verify system functionality and identify areas requiring corrective action.
  

Test Equipment Operation

• Utilize a variety of diagnostic and development tools, including:
  
  
  
  • Oscilloscopes
    
  • Digital Voltmeters (DVM)
    
  • Volt-Ohm Meters (VOM)
    
  • Signal Generators
    
  • Power Supplies
    
  • Other electronic test equipment
    
  
  
  

Team Collaboration

• Work closely with engineers, technicians, and program teams to support project objectives.
  
• Maintain accurate records and documentation throughout testing and development activities.
  
• Follow established procedures while contributing to a collaborative, safety-focused work environment.
  

Required Qualifications

Education & Experience

• High school diploma or GED and 2+ years of experience in electronics, avionics, or a related field
  

OR

• Completion of a formal electronics training program (technical school, military electronics training, etc.)
  

OR

• Associate's degree in Electronics, Electrical Technology, or a related discipline
  

Technical Skills

• Ability to read and interpret:
  
  
  
  • Electronic schematics
    
  • Wiring diagrams
    
  • Technical drawings
    
  • Work instructions
    
  
  
  
• Experience using electronic test equipment such as:
  
  
  
  • Digital Multimeters (DMM)
    
  • Oscilloscopes
    
  • Signal Generators
    
  • Power Supplies
    
  
  
  
• Basic soldering and rework experience, including through-hole and/or surface-mount components
  
• Familiarity with:
  
  
  
  • PCB assemblies
    
  • Wiring harnesses
    
  • Electronic components
    
  
  
  

Work Experience

• Hands-on experience assembling, testing, troubleshooting, repairing, or modifying electronic systems or assemblies
  
• Experience working in a production, laboratory, depot, or field service environment
  

Computer Skills

• Proficiency with basic office and computer applications
  
• Ability to enter and maintain testing data and documentation
  
• Experience following electronic travelers and work instructions
  

Professional Skills

• Strong attention to detail and documentation accuracy
  
• Ability to follow detailed written and verbal instructions
  
• Strong teamwork and communication skills
  
• Ability to work independently with minimal supervision
  

Physical Requirements

• Ability to stand, sit, bend, and lift up to approximately 25–35 pounds
  
• Ability to safely use hand tools and small power tools
  

Preferred Qualifications

• Willingness to work overtime, alternate shifts, or weekends as business needs require
  
• Ability to obtain a security clearance if the position is extended or converted
  
• Previous aerospace, aviation, defense, military, or launch systems experience
  
• Experience supporting engineering development and integration testing activities
  

Why Join Us?

At PDS Tech Commercial, we're committed to connecting skilled professionals with opportunities that drive innovation and shape the future. This role offers the chance to work on advanced aerospace technology while building valuable experience alongside industry-leading engineers and technical experts.

What You'll Enjoy

• Competitive pay at $77.92 per hour
  
• Opportunity to work at Vandenberg Space Force Base
  
• Hands-on experience with advanced interceptor and space launch systems
  
• Exposure to cutting-edge aerospace and defense technologies
  
• Collaborative team environment focused on innovation and excellence
  
• Career-building experience with a recognized industry leader
  
• Meaningful work that supports mission-critical programs and national objectives
  

Ready to Launch Your Next Career Move?

If you're an experienced electronics professional looking to contribute to advanced aerospace and defense programs, this is your opportunity to make an impact where precision, innovation, and reliability matter most.

Apply today and join PDS Tech Commercial in supporting the technologies that are shaping the future of flight, space exploration, and national defense.



This position requires use of information or access to facilities subject to the International Traffic in Arms Regulations (ITAR) and/or Export Administration Regulations (EAR). These regulations may limit access of controlled technologies: 1) to U.S. Persons, including U.S. Citizens, lawful permanent residents, and other narrow categories including refugees and asylees, or 2) to certain foreign nationals that have received an export license.                                               

 

• The California Fair Chance Act
• Los Angeles City Fair Chance Ordinance
• Los Angeles County Fair Chance Ordinance for Employers
• San Francisco Fair Chance Ordinance

Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Lead Supplier Strategy at the Highest Level as a Sr. Strategic Sourcing Specialist with PDS Tech!

Pay Rate: $60.00 – $85.00/hr (Based on Experience & Location)

 

We’re seeking a highly experienced Strategic Sourcing Specialist Principal to own executive-level supplier relationships and drive strategic initiatives across major aerospace programs. In this role, you’ll influence cost, performance, and supply chain strategy while collaborating across global teams.

This is a senior, high-impact opportunity for professionals with strong experience in strategic sourcing, supplier management, and negotiation.

 What You’ll Do

 Executive Supplier Management

• Build and maintain executive-level supplier relationships
  
• Drive supplier performance across cost, quality, and delivery
  
• Lead Quarterly Business Reviews (QBRs) with cross-functional stakeholders
  

 Cost & Contract Strategy

• Drive direct material productivity and cost savings initiatives
  
• Lead high-impact contract negotiations
  
• Optimize working capital, including:
  
  
  
  • Payment terms
    
  • Pay cycle improvements
    
  • Vendor Managed Inventory (VMI)
    
  
  
  

 Supply Chain Strategy & Risk Management

• Develop and execute strategic sourcing business plans
  
• Implement dual sourcing strategies to mitigate supply risks
  
• Drive High Growth Region (HGR) sourcing opportunities
  

 Cross-Functional Leadership

• Align sourcing strategy across engineering, operations, and business units
  
• Foster Gold Business Enterprise (GBE) collaboration
  
• Lead initiatives across Cost Management (CM) and Growth Management (GM)
  

 Leadership & Development

• Mentor and develop team members
  
• Support hiring, onboarding, and performance management
  
• Drive a continuous improvement culture across sourcing teams
  

 Required Qualifications

• 9+ years of experience in:
  
  
  
  
  • Supply Chain Management
    
  • Strategic Sourcing or Procurement
    
  
  
  
• Strong negotiation and executive-level stakeholder influence skills
  
• Proven ability to develop and execute strategic sourcing plans
  
• Excellent communication, interpersonal, and presentation skills
  
• Strong problem-solving and strategic thinking abilities
  

 Preferred Qualifications

• Bachelor’s degree in Business, Engineering, or related field
  
• Experience working in a global organization
  
• Experience leading programs or cross-functional teams
  
• Strong analytical and data-driven decision-making skills
  
• Ability to adapt in fast-paced, evolving environments
  

 What Makes You a Strong Fit

• Strategic mindset with ability to influence enterprise-level decisions
  
• Strong leadership presence with executive communication skills
  
• Ability to balance cost, risk, and supply chain performance
  
• Proven experience driving supplier accountability and results
  
• Self-driven with strong ownership and accountability
  

 Why Join This Opportunity?

• High-visibility role managing critical supplier relationships
  
• Influence enterprise supply chain strategy and cost optimization
  
• Work across global teams in a leading aerospace organization
  
• Opportunity to shape long-term sourcing and growth strategies
  
• Competitive pay aligned with senior-level expertise
  

 Ready to Lead Strategic Sourcing Initiatives?

If you’re a senior sourcing professional with strong leadership and negotiation experience, apply today and take ownership of supplier strategy at an enterprise level.

• The California Fair Chance Act
• Los Angeles City Fair Chance Ordinance
• Los Angeles County Fair Chance Ordinance for Employers
• San Francisco Fair Chance Ordinance

Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Power the Grid. Build the Future. Join Us as an Assistant Electrical Detailer! 

Bring Your Utility Design Expertise to Projects That Keep Communities Connected 

Location: La Jolla, or Brea, CA | Payrate: $35 - $37/hour | Schedule: 1st shift, 8am to 5pm 

PDS Tech Commercial is partnering with a leading organization in the energy industry to hire an experienced Assistant Electrical Detailer to support critical Transmission & Distribution (T&D) substation projects. In this role, you'll contribute to the design and development of electrical infrastructure serving major utility clients, including Xcel Energy, helping deliver reliable power to homes, businesses, and communities. 

If you're passionate about precision drafting, electrical substation design, and working on impactful utility projects, this is your opportunity to advance your career with a team that values technical excellence and collaboration. 

What You'll Do 

As an Assistant Electrical Detailer, you will provide high-quality drafting and detailing support for electrical substation projects within the electric utility industry. Working closely with engineering and project teams, you'll help transform design concepts into accurate construction-ready documentation. 

Key Responsibilities 

• Prepare, revise, and maintain detailed electrical substation design drawings and construction documents. 

• Develop layouts and detailed plans for substation equipment, grounding systems, conduit systems, and electrical installations. 

• Create and modify drawings in accordance with client standards, project specifications, and industry regulations. 

• Utilize AutoCAD and MicroStation CONNECT to produce accurate and high-quality design deliverables. 

• Coordinate with engineers and project stakeholders to incorporate design updates and project changes. 

• Perform quality control reviews to ensure drawing accuracy, completeness, and compliance with utility standards. 

• Support multiple utility projects while maintaining attention to detail and meeting project deadlines. 

• Contribute to the successful execution of transmission and distribution infrastructure projects. 

Required Qualifications 

Candidates must meet one of the following education and experience requirements: 

• Bachelor's Degree in Drafting Technology or a related field and a minimum of 2 years of hands-on experience in electrical utility design related to electrical substation systems, OR 

• Associate Degree in Drafting Technology or a related field and a minimum of 3 years of hands-on experience in electrical utility design related to electrical substation systems, OR 

• High School Diploma/GED and a minimum of 4 years of hands-on experience in electrical utility design related to electrical substation systems. 

Additional Requirements 

• Minimum 3 years of experience in the electric utility industry with a strong emphasis on electrical substation design. 

• Proficiency with AutoCAD and MicroStation CONNECT (MicroStation experience must be clearly reflected on your resume). 

• Experience creating detailed drawings for substation equipment, layouts, grounding systems, conduit systems, and electrical plans. 

• Strong understanding of utility standards, drafting best practices, and quality control procedures. 

• Excellent organizational skills, attention to detail, and ability to work collaboratively within project teams. 

Preferred Qualifications 

• Associate Degree in Drafting Technology or a related discipline. 

• Experience supporting major utility clients and transmission and distribution projects. 

• Knowledge of industry drafting standards and utility design practices. 

• Experience with 3D design software such as Revit, AutoCAD Electrical, Inventor, and/or Civil 3D. 

• Ability to thrive in a fast-paced, deadline-driven project environment. 

Apply Today 

Ready to put your drafting expertise to work on critical energy infrastructure projects? 

Apply now and join PDS Tech Commercial in partnership with a leader in the energy industry. Take the next step in your career and help design the systems that keep the power flowing. 

• The California Fair Chance Act
• Los Angeles City Fair Chance Ordinance
• Los Angeles County Fair Chance Ordinance for Employers
• San Francisco Fair Chance Ordinance

Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Drive Innovation in Aerospace: Senior Tooling Manufacturing Planner Wanted

Pay from: $45 to $55 per hour
Job Type: Full-Time Consultant (6-month assignment)
Schedule: Monday–Friday | 1st Shift (7:00 AM – 3:30 PM)
Location: Everett, WA
Company: PDS Tech Commercial (partnering with a global aviation leader)

Make Your Mark on the Future of Flight

PDS Tech Commercial is seeking a Senior Tooling Manufacturing Planner to support a world-class aviation leader. In this pivotal role, you will help design, implement, and optimize manufacturing plans and tooling strategies that directly impact quality, efficiency, and cost performance. If you’re a strategic thinker who thrives on solving complex production challenges, this is your opportunity to influence how aircraft are built at scale.

What You’ll Do

As a senior-level contributor within Production Engineering, you will:

• Lead the development and maintenance of manufacturing plans, Bill of Materials, work instructions, and process documentation

• Develop and implement manufacturing concepts and strategies aligned to business objectives

• Prepare build analyses and detailed cost estimates

• Integrate suppliers, materials, technologies, and processes into efficient production workflows

• Develop complex tooling requirements and manage tooling lifecycle from design through retirement

• Lead investigations and resolution of complex or systemic manufacturing issues

• Conduct and oversee producibility assessments of engineering designs

• Establish sequencing and work statements to meet aggressive delivery schedules

• Develop scheduling templates and standard processes for broader team use

• Draft, update, and maintain procedures to meet business and regulatory requirements

• Benchmark industry practices and incorporate best-in-class methodologies

• Work with minimal direction while influencing cross-functional teams and stakeholders

What You Bring

Required Qualifications:

• 6+ years of related experience (or equivalent combination of education and experience)

• Experience in a manufacturing or production environment

• Strong ability to read, interpret, and apply engineering drawings and specifications

• Proven experience solving complex production and tooling challenges

• Strong attention to detail with the ability to manage multiple priorities

• This position requires use of information or access to facilities subject to the International Traffic in Arms Regulations (ITAR) and/or Export Administration Regulations (EAR). These regulations may limit access of controlled technologies: 1) to U.S. Persons, including U.S. Citizens, lawful permanent residents, and other narrow categories including refugees and asylees, or 2) to certain foreign nationals that have received an export license.                                               

Preferred Qualifications:

• Experience with Manufacturing Engineering Planning systems such as PDM and CAPP

• Background in aerospace or highly regulated manufacturing environments

• Associate degree (AA) or higher in a related discipline

• Demonstrated leadership in cross-functional planning and process improvement initiatives

Why Join Us?

At PDS Tech Commercial, we connect talented professionals with opportunities that shape industries and careers.

• Be part of a globally recognized aviation leader driving cutting-edge innovation

• Competitive compensation with opportunities to expand your expertise

• Work in a collaborative, forward-thinking engineering environment

• Gain exposure to complex, high-impact aerospace programs

Join a team where your expertise is valued and your ideas help define the future of manufacturing.

Ready to Take Your Career Higher? Apply Today.

If you’re ready to lead, innovate, and make a measurable impact in aerospace manufacturing, don’t miss this opportunity.

Apply now and help shape the future of aviation with PDS Tech Commercial.

• The California Fair Chance Act
• Los Angeles City Fair Chance Ordinance
• Los Angeles County Fair Chance Ordinance for Employers
• San Francisco Fair Chance Ordinance

Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

• Loading and unloading materials from trucks, trains, or aircraft using equipment such as hand trucks, forklifts, hoists, and conveyors.
  
• Safely and efficiently transporting materials within the storage facility to designated areas.
  
• Maintaining organization and ensuring materials are in the correct locations.
  
• Following established guidelines and instructions to carry out daily responsibilities.
  
• Supporting overall warehouse operations to help meet team goals and timelines.
  

• High school diploma or equivalent preferred.
  
• 0-2 years of experience in warehousing, logistics, or a related field.
  
• Ability to operate material handling equipment, including forklifts (training may be provided).
  
• Strong attention to safety and ability to follow established procedures.
  
• Dependability and commitment to working with a positive attitude.
  

• Experience in a warehouse or distribution center setting.
  
• Basic understanding of warehouse operations and material handling procedures.
  
• Ability to work in a fast-paced, team-oriented environment.
  

• A supportive work environment: Join a collaborative, motivated team that values your contributions and fosters growth.
  
• A path to growth: With hands-on training and advancement opportunities, you’ll have the chance to develop your skills and take on more responsibilities.
  
• Generous bonus program: Eligible employees can earn up to $3,000 in bonuses based on performance and perfect attendance!
  
• Competitive pay: Start with an hourly rate of $18.00/hr on 1st Shift 6am-2:30pm
  
• Benefits package: We offer great benefits that prioritize your health, well-being, and financial security.
  

• The California Fair Chance Act
• Los Angeles City Fair Chance Ordinance
• Los Angeles County Fair Chance Ordinance for Employers
• San Francisco Fair Chance Ordinance

Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.