Make Your Mark in Aerospace Innovation! 

Location: Mobile, AL | Payrate: $23.50 | Schedule: 2nd shift (2pm-10:30pm)

Are you ready to be part of a team that plays a pivotal role in building the future of aviation? PDS Tech Commercial is seeking a skilled and driven Automated Drilling Unit (ADU) Technician/Mechanic to join our Manufacturing team in Mobile, AL. As a key member of the team, you will provide critical technical and mechanical support to the ADU shop, ensuring the flawless setup and maintenance of ADUs for the production of commercial aircraft. 

What You’ll Be Doing: 

• Set-up & Implementation: Set up and implement ADU equipment, working alongside the manager. You’ll use your expertise to advise on best practices for floor setups and traffic strategies. 

• Technical Support & Maintenance: Oversee the qualification of ADUs, maintain and adjust ADUs, cutting tools, and drilling templates. Provide technical problem-solving support to the Head of Back Shops and Head of the Station. 

• Mentorship: Provide guidance to employees using ADU equipment for the first time, ensuring smooth operations and safety. 

• Continuous Improvement: Support the ongoing maintenance, repair, and optimization of ADUs, cutting tools, drilling templates, and test equipment. 

• Hands-on Mechanical Expertise: Use your extensive knowledge of mechanical work to ensure the highest quality standards in the final assembly line ADU Shop. 

Qualifications We’re Looking For: 

• Required:  

  • Minimum of 2 years of hands-on experience with the maintenance of ADUs, cutting tools, drilling templates, and test equipment. 

  • This position requires use of information or access to facilities subject to the International Traffic in Arms Regulations (ITAR) and/or Export Administration Regulations (EAR). These regulations may limit access of controlled technologies: 1) to U.S. Persons, including U.S. Citizens, lawful permanent residents, and other narrow categories including refugees and asylees, or 2) to certain foreign nationals that have received an export license.

• Preferred:  

  • 5+ years of experience in a similar role, demonstrating advanced skills and expertise. 

• Physical Requirements:  

  • Ability to engage in various physical tasks, including lifting up to 30lbs and standing for extended periods. 

  • Good vision, hearing, and the ability to operate a wide range of equipment. 

  • Willingness to travel and walk through production areas. 

Ready to Join the Team? 

If you have the expertise and passion to contribute to the next generation of aerospace, we want to hear from you! Apply now and take the next step in your career with PDS Tech Commercial. 

• The California Fair Chance Act
• Los Angeles City Fair Chance Ordinance
• Los Angeles County Fair Chance Ordinance for Employers
• San Francisco Fair Chance Ordinance

Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Make an impact! Join the Aerospace Revolution! PDS Tech Commercial, Inc. is seeking candidates for an Experienced Airframe and Powerplant (A&P) Technician in Indianapolis.

In this role, not only will you be working for an industry leader in the aviation industry, but you will also have the opportunity to accelerate your career in manufacturing.

• Pay = $32-38 per hour (dependent on experience)

With our client, our employees work together to evolve mobility worldwide - one good idea at a time. If you have a good idea, we’ll provide the environment where it will thrive and grow into a great product or customer experience. Your ideas are our fuel.

Responsibilities and Duties:

• Perform all work assigned in accordance with approved FAA data.

• Structural Repair & Composite repair experience is a requirement.

• Ensure complete and proper documentation of work performed.

• Ensure that all maintenance performed and is in an air-worthy condition.

• Maintains the premises and the repair station in a clean and organized manner.

• Performs additional duties as requested by the manager personnel.

Education, Knowledge and Skills:

• FAA Airframe & Powerplant (A&P) License is required

• Experience of communication skills, report writing and presentation skills

• English communication in both speech and written format

Pay for this position commensurate with experience plus overtime as needed. These are temp to hire opportunities with an industry leading aerospace and aviation organization.

Still not convinced? PDS offers one of the most comprehensive benefits package in the industry. If you are ready for your career to take flight, apply today!

This position requires use of information or access to facilities subject to the International Traffic in Arms Regulations (ITAR) and/or Export Administration Regulations (EAR). These regulations may limit access of controlled technologies: 1) to U.S. Persons, including U.S. Citizens, lawful permanent residents, and other narrow categories including refugees and asylees, or 2) to certain foreign nationals that have received an export license.

• The California Fair Chance Act
• Los Angeles City Fair Chance Ordinance
• Los Angeles County Fair Chance Ordinance for Employers
• San Francisco Fair Chance Ordinance

Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

• Perform technical upholstery functions within design, customer, FAA, and Company specifications. Specific installation and trim tasks are to be completed in compliance with work order instructions and specifications.
• Fit panels and windows, cabin head liners, upper sidewalls, lower side panels, hatch panels, windows, cut and surge carpets, cover bulkheads, fabricate various metal parts, and covering and installation of panels.
• Create carpet patterns per design drawings and complete installation. .
• Use the material tracking system to create parts demand, track squawks and to sign-off work.

• Ability to read, write, speak, and understand proficiently the English language.
• Ability to read and interpret blueprints and engineering documentation.
• Ability to use measuring tools and perform basic math computations.
• Must be computer literate.
• Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift.
• Valid Driver's License Required

• High School Diploma or GED required.
• Experience using commercial sewing machines, sergers and/or various hand tools used in upholstery and carpet trades is preferred.

• The California Fair Chance Act
• Los Angeles City Fair Chance Ordinance
• Los Angeles County Fair Chance Ordinance for Employers
• San Francisco Fair Chance Ordinance

Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Your Expertise Keeps the Skies Safe — PDS Tech Commercial is Hiring an Airworthiness Inspector to Join a Leader in Aerospace!

Location: Dallas, TX | Pay Rate: $37.86/hour | Schedule: FT/1st Shift (7am - 3:30pm)
*Start on First Shift; transition to Second Shift (3:00 PM – 11:30 PM CT) after proficiency is established

Be the Guardian of Airworthiness
At PDS Tech Commercial, we are proud to partner with a global leader in the aerospace industry—an organization recognized for innovation, safety, and precision. As an Airworthiness Inspector, you will play a critical role in ensuring every aircraft meets the highest standards of safety and compliance before it takes flight. Your expertise will directly impact the quality, reliability, and performance of some of the most advanced aircraft in the world.
 
What You’ll Do
In this hands-on inspection role, you’ll serve as the final authority ensuring that all maintenance, repairs, and alterations conform to FAA regulations and company standards. Your day will include:

• Conducting detailed inspections of aircraft, engines, and components to verify conformity with FAA-approved data.

• Coordinating inspection and mechanical requirements during aircraft maintenance and outfitting.

• Reviewing and signing off on aircraft documentation, ensuring all records are accurate, complete, and compliant for return to service.

• Auditing maintenance documentation and performing conformity inspections for FAA presentation.

• Mentoring technicians on proper documentation and compliance procedures.

• Monitoring ongoing Repair Station compliance with FAR Part 145 and the Quality Control Manual.

• Supporting aircraft certification and final phase testing, which may include flight test support.

 
Qualifications – What You Bring
Required (Non-Negotiable):

• High School Diploma or GED

• Valid Airframe & Powerplant (A&P) License

• Minimum 4 years of hands-on experience inspecting large or mid-size aircraft

• Extensive experience with Transport Category Aircraft

• Proficient in Federal Aviation Regulations (FARs), FAA forms, and documentation

• Skilled in blueprint reading, shop mathematics, and Quality Control (QC) procedures

• Strong written and verbal communication skills; fluent in English

• Ability to work all shifts, climb ladders, work in confined areas, and lift up to 40 lbs

Highly Preferred:

• Familiarity with Company product lines and processes

• Prior experience in the aerospace industry

• Local candidates strongly preferred

 
Why Join Us
At PDS Tech Commercial, you’ll be part of a team that values excellence, safety, and professional growth. We offer:

• The opportunity to work with industry-leading aerospace technology

• A collaborative and safety-focused environment

• Competitive pay and benefits

• Career advancement and long-term placement opportunities with top-tier aerospace manufacturers

• A culture that recognizes your skill, dedication, and attention to detail

Here, your commitment to precision ensures that every flight takes off safely and confidently — and that’s something to be proud of.
 
Ready to Elevate Your Career?
If you’re an experienced inspector passionate about aviation safety and quality, we want to hear from you.
Apply today and become part of the trusted team that keeps the skies safe.
 

• The California Fair Chance Act
• Los Angeles City Fair Chance Ordinance
• Los Angeles County Fair Chance Ordinance for Employers
• San Francisco Fair Chance Ordinance

Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Staff Analyst – Drive Training Excellence in the Aerospace Industry

PDS Tech Commercial is seeking a highly skilled Staff Analyst to support a leading aerospace organization in Renton, WA. This is an exciting full-time, onsite consulting opportunity where your analytical expertise and customer-focused mindset directly impact training success across a large production environment.

About the Role

As a Staff Analyst, you will play a key role in developing, coordinating, and optimizing training plans that support a major aerospace production system. You will work closely with leaders, employees, and cross-functional teams to ensure training programs are effectively delivered, accurately tracked, and continuously improved. If you thrive in a fast-paced environment and enjoy using data to drive meaningful outcomes, this role offers the opportunity to make a measurable impact.

What You’ll Do

• Collect, organize, and analyze training data to build and maintain comprehensive training plans
• Prepare and update training forecasts, schedules, historical records, and completion reports
• Perform ad hoc data queries and business management tasks to meet organizational goals
• Monitor data integrity, conduct risk assessments, and resolve discrepancies
• Respond to training-related inquiries and deliver exceptional customer service
• Collaborate with teams across the organization to implement training initiatives
• Support process improvement projects to enhance training effectiveness
• Interact daily with employees, leaders, and stakeholders
• Present insights and findings to leadership
• Independently manage multiple deadlines in a dynamic environment

Required Qualifications

• 3+ years in a customer-facing role gathering requirements
• 3+ years supporting senior and executive leadership
• 5+ years leading employee-focused activities or initiatives
• 3+ years managing multiple deliverables with minimal direction
• 3+ years collecting, analyzing, and presenting data
• Proficiency with Microsoft Excel, PowerPoint, Outlook, and Word

Preferred Qualifications

• Bachelor’s degree or higher
• Experience coordinating training programs and workforce development efforts
• Strong systems-thinking capabilities
• Experience advising leaders to meet schedules and resolve operational challenges
• Skilled communicator capable of reaching diverse audiences across multiple platforms

Why Join PDS Tech Commercial

At PDS Tech Commercial, you will be part of a team that values professionalism, integrity, and dedication. We connect talented professionals with top-tier aerospace opportunities and provide the support, stability, and resources needed to succeed. You’ll gain valuable experience working onsite with a world-class aerospace organization, while enjoying the benefits of partnership with a trusted staffing leader.

Position Details

• Location: Renton, WA (100% onsite)
• Schedule: Monday–Friday, 5:00 AM – 1:30 PM (1st Shift)
• Type: Full-time, 12-month consultant role
• Pay Range starting at: $40.93 per hour
• Start Date: Target of January 16
• Travel: None required
• Work Schedule: 9x80 available
• Physical Requirements: Occasional lifting up to 10 lbs

Ready to Make an Impact?

If you are a proactive problem-solver with strong analytical skills and a passion for supporting workforce development, we want to hear from you. Apply today to join PDS Tech Commercial and take the next step in your aerospace career.

• The California Fair Chance Act
• Los Angeles City Fair Chance Ordinance
• Los Angeles County Fair Chance Ordinance for Employers
• San Francisco Fair Chance Ordinance

Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

• Communicate as required to receive and understand work assignments. Perform complex aircraft inspections, repairs, and modifications with minimal supervision.
• Coordinate with MTL, STM, and the Inspection Department to ensure compliance with internal and FAA inspection and documentation requirements. Properly complete CMP cards, work order sign-offs, and other paperwork in a timely and accurate manner. Assist as needed with shift turnovers.
• Ensure that all work accomplished meets quality standards and specifications.
• Properly identify (tag) customer property and equipment. Store aircraft components and other customer property securely and safely.
• Follow standard operating procedures when operating ground support equipment (external power carts, hydraulic mules, hydraulic lift platforms, tow tugs, forklifts, compressed gas cylinders, etc.) .
• Coordinate, accomplish, and assist with aircraft movement in hangar and ramp areas.
• Provide training to less experienced technicians. .
• Protect customer property (PTP).

• Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags. Apply 6S and Lean Initiatives to keep shops, hangars, and aircraft work areas clean and uncluttered.
• Implement and apply Lean/continuous improvement processes to all areas of responsibility.
• Properly use and maintain Company-provided tools and equipment. Return items to designated storage area after use.
• Comply with safety rules and procedures. Use protective equipment as required. and be alert for unsafe conditions. Address unsafe conditions before putting people or property at risk.
• Use the material tracking system to create parts demand, track squawks, and sign-offs, and to charge labor to correct work orders.
• In support of aircraft certification and final phase testing, may include flight tests on aircraft as required.

• Working knowledge of the FAA regulations, process specifications, Repair Station and Quality Control manuals, and company policies and procedures.
• Must have working knowledge of Turbine Engines.  Rolls Royce and Pratt Whitney specific would be a plus!
• Must be able to read, write, speak, and understand the English language.
• Live A/C experience required.

• High School Diploma or GED required.
• FAA Airframe and Powerplant certificate and Two (2) years of aviation maintenance experience or Four (4) years of aviation maintenance experience to include 2 years of experience working on mid/large size aircraft required.
• Valid Driver’s License required.

• The California Fair Chance Act
• Los Angeles City Fair Chance Ordinance
• Los Angeles County Fair Chance Ordinance for Employers
• San Francisco Fair Chance Ordinance

Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Join the Front Line of Excellence: Become a Customer Resolution Specialist with PDS Tech Commercial!  

Location: Herndon, VA | Payrate: $28 - $31/hour 

Make an Impact in a Global, High-Performance Aviation Environment 

PDS Tech Commercial is partnering with a global leader in the aviation industry to find a passionate Customer Resolution Specialist (CRS) who thrives in a fast-paced, customer-centric role. In this position, you’ll be the vital link between customers across the Americas and the mission-critical aircraft parts and services they need to keep the world moving. Your work will directly empower airlines, operators, and global partners to stay airborne and connected. 

What You’ll Do: Your Day-to-Day Responsibilities 

Order Processing – 60% 

• Manage customer orders, quotations, and initial order receipts for aircraft spare parts—both for company aircraft and competitor models. 

• Handle order entry, sourcing escalation, backorders, logistics, and follow-ups to exceed customer expectations. 

• Provide accurate information on part availability, pricing, returns, transportation, deliveries, and discrepancies. 

Relationship Building – 20% 

• Build trust with customers by promoting our strong service capabilities and reinforcing confidence in our solutions. 

• Present alternative options and direct customers to the right resources to ensure complete satisfaction. 

Technical Support – 10% 

• Support Sales and Finance with debt reconciliation to maximize profitability. 

• Address technical inquiries by using documentation and collaborating with technical/engineering teams. 

Additional Responsibilities – 10% 

• Contribute to team success through other assigned duties that support the operation. 

What You’ll Bring: Qualifications 

Required 

• Associate’s Degree in Business, Sales Administration, or related field — or equivalent experience. 

• 2+ years of customer service experience in a fast-paced environment. 

• Intermediate proficiency with Microsoft Office Suite or Google Suite. 

• Strong PC literacy and database skills. 

• Ability to work onsite 60% / remote 40%. 

• This position requires use of information or access to facilities subject to the International Traffic in Arms Regulations (ITAR) and/or Export Administration Regulations (EAR). These regulations may limit access of controlled technologies: 1) to U.S. Persons, including U.S. Citizens, lawful permanent residents, and other narrow categories including refugees and asylees, or 2) to certain foreign nationals that have received an export license.

Preferred 

• Experience in the aviation industry or a military support environment. 

• Basic knowledge of SAP. 

Physical Requirements 

• Ability to sit, stand, walk, and operate standard office equipment daily. 

• Occasional lifting, carrying, or movement of items up to 30lbs. 

• Ability to read engineering documents and communicate clearly in person, by phone, and via teleconference. 

• PPE may be required when visiting shop floor areas. 
   

Ready to Elevate Your Career? Apply Today! 

If you’re energized by customer service, thrive in technical environments, and want to grow in a global aviation setting, we want to hear from you. 

Apply now and help us keep the world connected—one aircraft part at a time. 

• The California Fair Chance Act
• Los Angeles City Fair Chance Ordinance
• Los Angeles County Fair Chance Ordinance for Employers
• San Francisco Fair Chance Ordinance

Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Now Hiring Experienced Sealers: Build the Future of Aerospace with PDS Tech Commercial 
Location: North Charleston, SC | Starting pay: $31.09 | Must be open to work any shift 

Summary of the Role 

PDS Tech Commercial is seeking highly skilled Sealers to support critical fuel tank, structural, and component sealing operations for one of the most respected aerospace manufacturers in the world. In this role, you will perform detailed sealing, installation, and rework tasks that directly impact aircraft safety, performance, and reliability. Your craftsmanship ensures every aircraft meets the highest standards of quality and compliance. 

Day-to-Day Responsibilities 

• Apply sealants to aircraft surfaces in strict accordance with specifications. 

• Look up, read, and interpret technical work instructions, drawings, and specifications in English. 

• Install various aircraft system components such as panels and structural hardware. 

• Perform in-tank sealing in fuel tanks and other structural areas, including rework and wash operations. 

• Conduct bond and ground measurements to ensure proper electrical grounding. 

• Operate mechanical lifts including ladders, tiger lifts, and snorkel lifts. 

• Work safely with chemical solvents, sealants, coatings, primers, adhesives, paints, and special finishes. 

• Perform sealing and rework in confined spaces, with proper training and certification. 

• Carry and lift up to 35 pounds as part of routine tasks. 

• Maintain high standards of safety, quality, and regulatory compliance. 

Required Qualifications 

• 7 or more years of experience using software applications such as internet tools, email, Microsoft Suite, or other specialized computer systems. 

• 7 or more years of experience reading and following detailed work instructions, blueprints, drawings, or specifications in English. 

• 7 or more years of experience in advanced manufacturing, mechanical, or technical roles using basic hand tools, power tools, and pneumatic tools. 

• 7 or more years of experience working with chemical solvents, sealants, coatings, primers, adhesives, paints, and special finishes. 

• Ability to work variable shifts (1st, 2nd, or 3rd). 

• Ability to work in confined spaces with necessary certification. 

• Ability to lift up to 35 pounds and meet all physical demands of the role including bending, kneeling, overhead reaching, climbing, twisting, crawling, and crouching. 

Preferred Qualifications 

• Experience sealing or reworking aircraft fuel tanks. 

• Prior background in aerospace assembly or aircraft structures. 

• Strong understanding of safety and compliance in regulated environments. 

Take Your Aerospace Career to the Next Level 

If you have the experience, precision, and dedication required for this critical role, PDS Tech Commercial wants to hear from you. This is your opportunity to contribute to world-class aerospace production while expanding your skills in an environment that values quality, safety, and excellence. 
 

Apply Today 

Join the team shaping the future of flight. Submit your application now to be considered for this high-impact opportunity. 

This position requires use of information or access to facilities subject to the International Traffic in Arms Regulations (ITAR) and/or Export Administration Regulations (EAR). These regulations may limit access of controlled technologies: 1) to U.S. Persons, including U.S. Citizens, lawful permanent residents, and other narrow categories including refugees and asylees, or 2) to certain foreign nationals that have received an export license. 

• The California Fair Chance Act
• Los Angeles City Fair Chance Ordinance
• Los Angeles County Fair Chance Ordinance for Employers
• San Francisco Fair Chance Ordinance

Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Lead Digital Innovation in Aerospace — Program Management (Digital Technology)

PDS Tech Commercial is partnering with an industry leader to hire a seasoned Program Management professional supporting the Digital Technology organization. This high-impact role offers the opportunity to influence financial strategy, improve operational efficiency, and support digital initiatives that are transforming the aerospace and defense industry.

Role Summary

As a Program Management Consultant, you will serve as a trusted financial and program partner to Digital Technology (DT) leadership. You’ll drive planning, forecasting, and financial analysis for digital initiatives—ensuring leadership has the insights needed to achieve operating plans, improve performance, and support long-term strategic goals.

What You’ll Do Day to Day

• Partner with Digital Technology leadership and finance teams to manage planning, actuals, and forecasting

• Compile, analyze, and report DT spend while forecasting future costs and resource needs

• Support month-end close activities and ongoing forecast updates

• Analyze financial results and provide insights to drive short- and long-term improvements

• Support the Annual Operating Plan (AOP) and Long-Range Planning processes

• Monitor headcount, capital investments, and operating expenses

• Identify and lead continuous improvement initiatives across financial and program processes

• Maintain effective internal controls and ensure compliance with SOX, USG accounting, and trade regulations

• Collaborate across a highly matrixed organization, including finance, program leaders, and stakeholders

Required Qualifications

• Advanced knowledge of financial planning and analysis, gained through education and experience

• Experience analyzing, interpreting, and presenting complex financial data to leadership

• Finance experience supporting FP&A in a matrixed organization

• Strong proficiency in Microsoft Excel, Word, and PowerPoint

• This position requires use of information or access to facilities subject to the International Traffic in Arms Regulations (ITAR) and/or Export Administration Regulations (EAR). These regulations may limit access of controlled technologies: 1) to U.S. Persons, including U.S. Citizens, lawful permanent residents, and other narrow categories including refugees and asylees, or 2) to certain foreign nationals that have received an export license.                                               
   

Preferred Qualifications

• Bachelor’s degree or equivalent experience with 8+ years of relevant professional experience

• Prior SAP experience

• Demonstrated leadership or program ownership experience

• Strong critical thinking, problem-solving, and decision-making skills

• Ability to manage multiple priorities in a dynamic environment

• Self-motivated, deadline-driven, and comfortable working with minimal oversight

Why Join Us

At PDS Tech Commercial, we connect experienced professionals with world-class aerospace partners. In this role, supporting a leading Aerospace company, you’ll enjoy:

• Premium pay: $83.05 per hour

• Full-time, 12-month consultant opportunity

• Fully remote flexibility with the option to work onsite at any of our U.S. location

• Regular weekday office schedule

• The chance to influence digital transformation across aerospace and defense programs

• A collaborative, forward-thinking culture focused on innovation and continuous improvement

Ready to Drive the Numbers Behind Digital Aerospace?

If you’re a finance-driven program leader ready to support cutting-edge digital initiatives in aerospace, apply today and take your career to the next level with PDS Tech Commercial.

• The California Fair Chance Act
• Los Angeles City Fair Chance Ordinance
• Los Angeles County Fair Chance Ordinance for Employers
• San Francisco Fair Chance Ordinance

Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

PDS Tech Commercial is Now Hiring Skilled Structural Mechanics to Support Cutting-Edge Aerospace Projects!

Location: Savannah, GA | Pay Rate: $25.66/hour | Schedule: Full-Time: 2nd Shift (3:30pm - 2am)

Join the PDS Tech Commercial – Shape the Future of Aviation!
Are you passionate about aviation and have hands-on experience in structural assembly? PDS Tech Commercial is looking for a skilled Structural Mechanic II to join our team and contribute to cutting-edge projects in the aviation industry. If you’re ready to apply your expertise, work in a dynamic environment, and play a key role in building the future of flight, we want to hear from you!
 
About the Role:
As a Structural Mechanic II, you will work in a team-oriented environment where you will perform a variety of structural assembly operations. Your work will directly impact the assembly and fitting of aircraft parts and structures, ensuring that each part meets the highest standards of quality and safety. You’ll have the opportunity to contribute to the assembly process from start to finish, working under minimal supervision to bring complex aircraft designs to life.

Key Responsibilities:

• Perform assembly, fitting, drilling, and riveting of parts and structures, ensuring each piece meets quality standards and customer expectations.

• Use tools like riveting guns, pneumatic drills, countersinks, and rivet shavers to ensure a precise fit and finish.

• Read and interpret blueprints, work orders, and operation sheets to determine the correct sequence of operations and ensure proper assembly.

• Verify that all assemblies meet quality standards and perform necessary rework based on Material Review Requests (MRR) or Discrepant Material Tags (DMT).

• Maintain a safe, clean, and organized work environment, adhering to safety regulations and the company’s 5S Program.

• Participate in continuous improvement activities like Kaizen events and help optimize production processes.

• Properly use and maintain company-provided tools, ensuring all equipment is returned in good condition.

 
Required Qualifications:

• High School Diploma or GED required.

• 2+ years of related structural assembly experience.

• Ability to read and interpret blueprints and use basic shop math.

• Must be able to lift up to 50 lbs, work in small or restricted spaces, and operate ground support equipment.

• A commitment to safety, attention to detail, and the ability to follow standard operating procedures.

 
Preferred Qualifications:

• Experience with Solumina and Smarteam software.

• Familiarity with working on composite materials.

• Previous experience with Lean Activities and process improvement efforts.

• Ability to work various shifts as required.

 
Why Join Us:
At PDS Tech Commercial, we’re committed to fostering a collaborative, innovative, and inclusive work environment. As part of our team, you’ll work alongside industry experts who share your passion for aviation and craftsmanship. We offer competitive pay, benefits, and opportunities for professional growth and development. Plus, you’ll be a key player in shaping the future of aviation with each aircraft assembly you contribute to.
 
Ready to take off? Apply Today!
If you’re ready to make a direct impact in the aviation industry and take your career to new heights, apply now! Let’s build the future of aviation together.
 

• The California Fair Chance Act
• Los Angeles City Fair Chance Ordinance
• Los Angeles County Fair Chance Ordinance for Employers
• San Francisco Fair Chance Ordinance

Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Build the Future of Flight with PDS Tech Commercial: Join Our Team as a Skilled Structural Mechanic in Aerospace! 

Location: Tulsa., OK | Pay Rate: $21.21/hour | Schedule: Full-Time, 1st Shift (5am - 3:30pm) 

Build the Future of Aviation One Rivet at a Time 

At PDS Tech Commercial, we’re seeking a dedicated Structural Mechanic to join our innovative team in the aerospace industry. This role is your chance to work on the cutting edge of aviation technology, performing structural assembly operations that contribute to the creation of world-class aircraft. If you're a hands-on problem solver who thrives in a collaborative environment, this is the opportunity you've been waiting for. 

What You’ll Be Doing: 

• Perform detailed structural assembly operations, including drilling, riveting, and fitting parts to ensure top-notch quality and adherence to FAA requirements and Company standards. 

• Use a variety of tools like portable riveting guns, pneumatic drills, and reamers to assemble sheet metal and structural parts. 

• Read and interpret blueprints, sketches, and work orders to ensure precise operations and proper part assembly. 

• Conduct thorough inspections of your work, ensuring defect-free assemblies before final inspection. 

• Keep detailed logs and records, and enter labor into the system to track work progress. 

• Maintain a clean, safe, and organized workspace in compliance with safety regulations and company policies. 

Required Qualifications: 

• High School Diploma or GED 

• 1 year of structural assembly experience or 1 year of experience in an Aircraft Structures Technical Certificate Program (e.g., Savannah Tech Aircraft Structures Program) 

• Basic knowledge of aircraft structures, sheet metal, and fabrication processes 

• Ability to read and interpret basic blueprints and use a 6” scale 

• Basic computer skills for logging work and using resource planning systems 

• Ability to lift up to 50 lbs and work in small spaces, including climbing ladders or stands 

• Must be able to work any shift and adhere to safety procedures 

Preferred Qualifications: 

• Experience with Solumina and Smarteam systems 

• Knowledge of composite resins and materials 

• Prior experience with Lean activities and continuous improvement initiatives 

• Ability to use a variety of tools and equipment to complete structural assembly tasks 

Why Join Us? 

We believe in empowering our employees to reach new heights. We offer an exciting, team-oriented environment where you’ll collaborate with talented professionals in the aerospace field. As a Structural Mechanic I, you'll play a key role in producing top-tier aircraft while gaining valuable experience in the aerospace industry. We foster a culture of continuous improvement and safety, where your contributions directly impact the success of our projects. 

Ready to Take Off? 

If you’re passionate about hands-on work, love a challenge, and want to contribute to cutting-edge aerospace projects, apply today to join the PDS Tech Commercial team. Take your career to new heights and help us build the next generation of aircraft. 

• The California Fair Chance Act
• Los Angeles City Fair Chance Ordinance
• Los Angeles County Fair Chance Ordinance for Employers
• San Francisco Fair Chance Ordinance

Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Join the Future of Flight: Research & Development Engineer at PDS Tech Commercial (Partnering with a Global Aerospace Leader)

Location: Minneapolis, MN | Payrate: $55.28/hour

Are you ready to help shape the technologies that will define the next generation of aerospace innovation? PDS Tech Commercial is seeking a Research & Development Engineer to support groundbreaking projects with one of the industry’s most respected leaders. In this role, your work will directly impact product performance, manufacturing excellence, and mission-critical aerospace systems.

Role Summary

As an R&D Engineer, you will play a key role in developing and improving manufacturing processes while supporting prototype and product builds for the SGNCOE team. You’ll collaborate with subject matter experts, coordinate cross-functional activities, and communicate project milestones to stakeholders—ensuring innovation moves smoothly from concept to production.

What You’ll Do (Day-to-Day)

• Lead process improvement and development initiatives that elevate product quality and business outcomes.

• Support SGNCOE prototype and product builds, ensuring seamless execution.

• Evaluate designs and implement manufacturability enhancements.

• Conduct product testing, gather data, analyze results, and publish findings.

• Perform formal failure analysis and clearly communicate outcomes.

• Develop and maintain technical documentation.

• Provide regular status updates to leadership and stakeholders.

• Train factory personnel during transition-to-production activities.

• Travel up to 10% domestically and internationally as needed.

Required Qualifications (YOU MUST HAVE)

• Bachelor’s degree in Engineering (Materials Science, Physics, Chemistry, Chemical Engineering, Electrical Engineering, or Mechanical Engineering).

• Must be eligible to obtain a Security Clearance.

• Minimum 1.5 years of professional experience.

Preferred Qualifications (WE VALUE)

• Experience working with inertial instruments.

• Strong self-motivation and the ability to work independently with minimal supervision.

• Proficiency in design and analysis tools such as MiniTab, Access, and MS Office Suite.

• Six Sigma certification and hands-on experience with process improvement methodologies.

• Prior successful program experience in engineering or manufacturing environments.

• Excellent communication skills with the ability to convey complex ideas clearly.

Ready to Launch Your Career?

If you’re driven by innovation, energized by complex challenges, and eager to make a tangible impact in the aerospace world, we want to hear from you.
Apply today and take your place in engineering the future of flight!

This position requires use of information or access to facilities subject to the International Traffic in Arms Regulations (ITAR) and/or Export Administration Regulations (EAR). These regulations may limit access of controlled technologies: 1) to U.S. Persons, including U.S. Citizens, lawful permanent residents, and other narrow categories including refugees and asylees, or 2) to certain foreign nationals that have received an export license.    

• The California Fair Chance Act
• Los Angeles City Fair Chance Ordinance
• Los Angeles County Fair Chance Ordinance for Employers
• San Francisco Fair Chance Ordinance

Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Join Our Team as an Electro Mechanical Technician – Aerospace Industry

Location: Phoenix, AZ 85034
Job Type: Full-time; Consultant (12 Months)
Schedule: Monday to Friday, Second Shift (3:00 PM – 11:30 PM)
Pay Rate: $20 per hour + 10% shift differential ($22/hour)

This position requires use of information or access to facilities subject to the International Traffic in Arms Regulations (ITAR) and/or Export Administration Regulations (EAR). These regulations may limit access of controlled technologies: 1) to U.S. Persons, including U.S. Citizens, lawful permanent residents, and other narrow categories including refugees and asylees, or 2) to certain foreign nationals that have received an export license.                                               
 

Make an Impact in Aerospace Innovation

PDS Tech Commercial, in partnership with a global leader in the aerospace industry, is seeking a skilled Electro Mechanical Technician to support the development and assembly of critical aerospace components. In this role, you’ll apply your technical expertise to ensure precision, quality, and safety while contributing to groundbreaking projects that shape the future of flight.

What You’ll Do

• Assemble electronic devices, tools, and products according to blueprints, schematics, and process documentation.

• Use hand and power tools to perform routine, complex, and repetitive assembly operations.

• Plan, fabricate, assemble, test, inspect, calibrate, troubleshoot, and repair electrical and electronic hardware.

• Analyze test results to validate acceptance criteria and ensure product quality.

• Comply with all environmental, health, and safety standards.

Qualifications

Required:

• High School Diploma (or 2 years of relevant experience in lieu of diploma/GED).

• At least 2 years of experience in electro-mechanical assembly.

• Ability to work from drawings, schematics, and technical documentation.

• Willingness to work second shift and provide own steel toe shoes (reimbursed up to $150).

Preferred:

• Soldering certification.

• Experience with inspection and troubleshooting of electronic/electrical systems.

Why Join Us

At PDS Tech Commercial, you’ll partner with a leader in aerospace innovation while building your skills in a collaborative, high-tech environment. We are committed to supporting our employees with competitive pay, career growth opportunities, and a culture that values precision, safety, and teamwork. This is your chance to play a vital role in producing cutting-edge aerospace technology while advancing your career.

Take the Next Step

Ready to put your skills to work on the frontlines of aerospace innovation? Apply today to join a team that’s shaping the future of flight.

• The California Fair Chance Act
• Los Angeles City Fair Chance Ordinance
• Los Angeles County Fair Chance Ordinance for Employers
• San Francisco Fair Chance Ordinance

Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

• The California Fair Chance Act
• Los Angeles City Fair Chance Ordinance
• Los Angeles County Fair Chance Ordinance for Employers
• San Francisco Fair Chance Ordinance

Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

• Works under general supervision to fabricate furniture and other wood-surfaced subassemblies using blueprints, aircraft specifications and design/engineering drawings.
• Assembles, pins and glues cabinet shells. Installs drawer-slides, hinges, latches and other hardware in subassemblies. Applies exterior surface materials such as laminates, veneers, and cap strips.
• Uses various types of stationary and hand-held power tools to fabricate or disassemble furniture.
• Complies with all safety, 5S, and housekeeping policies. Uses personal protective equipment to protect aircraft interior.
• Uses the material tracking system to create parts demand, track squawks and to sign-off work.

• Works with lead and higher skilled technicians to develop and implement process improvements that increase safety, reduce, cost, cycle time, and man-hours using Lean Six-Sigma and other process improvement techniques.

• The ability to read write, speak, and understand the English language.
• Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift.
• Must be computer literate.
• Two (2) years or more of experience in cabinetmaking, woodwork, plastic laminate  or millwork.

• High School Diploma or GED required.
• Basic knowledge of cabinetmaking processes, products and tools.
• Two (2) years' experience in cabinetmaking.
• Experience in aerospace industry preferred.
• Possess a working knowledge of Client inspection and process specifications preferred.

• The California Fair Chance Act
• Los Angeles City Fair Chance Ordinance
• Los Angeles County Fair Chance Ordinance for Employers
• San Francisco Fair Chance Ordinance

Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

• Conduct inspections using engineering drawings, route cards, work instructions, technical specifications, and QA procedures.
• Perform preliminary, progressive, and final inspections of aircraft structures and systems.
• Verify functional operations, inspect for FOD (Foreign Object Debris), and confirm paperwork accuracy.
• Witness, verify, and document specified manufacturing process steps.
• Conduct conformity and first article inspections to ensure compliance with FAA-approved procedures.
• Support safe tool and equipment usage and storage in the work area.
• Provide technical support to manufacturing personnel.
• Conduct area inspections for standard compliance and participate in continuous improvement activities.
• Promote health, safety, and risk reduction practices in all work activities.

• High School Diploma or GED
• 1 year of quality inspection experience or 2 years of Customer specific manufacturing experience
• Completion of a formal inspection training program within 90 days
• Proficiency in blueprint reading, CATIA, and shop mathematics
• Competent with basic shop tools and equipment

• 2 years of manufacturing or equivalent aerospace experience

• Be part of a globally recognized aerospace manufacturer setting the standard in aviation excellence.
• Work in a safety-driven, team-focused environment where your contributions matter.
• Access opportunities for career growth, continuous learning, and skill development.
• Join a culture of quality, innovation, and pride in craftsmanship.

• The California Fair Chance Act
• Los Angeles City Fair Chance Ordinance
• Los Angeles County Fair Chance Ordinance for Employers
• San Francisco Fair Chance Ordinance

Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Quality Engineer III – Lead Quality Strategy and Innovation for High-Performance Products

Maple Grove, Minnesota | $36.06–$54.80/hr

PDS Tech Commercial is hiring a Quality Engineer III for a premier partner in Maple Grove. This is a high-impact role where your expertise will shape product reliability, elevate performance, and strengthen the long-term success of advanced electronic technologies. 

About the Role

As a Quality Engineer III, you’ll be at the center of product excellence—guiding quality initiatives from concept through production. You’ll lead quality planning for new technologies, troubleshoot complex issues on existing products, and build strong relationships with customers and suppliers. Your work directly enhances product integrity, manufacturing performance, and organizational capability.

This is an ideal role for a seasoned quality professional ready to take ownership, lead technical initiatives, and help shape a world-class quality system.

What You’ll Do

Champion Customer & Supplier Collaboration

• Represent quality as the key customer liaison, ensuring rapid, accurate responses to inquiries and corrective actions.

• Partner with suppliers and Supplier Quality teams to maintain high standards and resolve issues proactively.

Drive New Product Excellence

• Create robust quality plans using APQP and PPAP tools—FMEAs, Control Plans, MSA, SPC.

• Work with Engineering, Purchasing, Production, and Sales to anticipate risks, optimize processes, and launch products with confidence.

Strengthen Existing Product Performance

• Analyze system-level and technical issues to root cause and work cross-functionally to implement solutions.

• Lead compliance and qualification efforts for military and medical product lines.

Advance Quality Systems & Documentation

• Ensure QA equipment capability and champion improvements or upgrades when needed.

• Develop and maintain critical QA documentation, including AS9102-compliant first article reports and internal quality standards.

Lead Audits & Compliance Readiness

• Conduct internal audits and support certification audits for AS9100, ISO 13485, Nadcap, and AS9102.

• Introduce and refine statistical methods to elevate engineering and production performance.

Own Corrective Action & Technical Leadership

• Conduct rigorous root cause investigations and lead corrective/preventive action activities.

• Guide daily work for inspection teams and communicate key quality updates to leadership.

• Provide technical direction on export classifications, customer configurations, and all program execution requirements.

What You’ll Bring

Required Qualifications

• Bachelor’s degree in Engineering or Mathematics.

• At least 5 years of experience in electronic assembly manufacturing under AS9100, ISO 9001, or ISO 13485 standards.

• Strong proficiency in engineering fundamentals, manufacturing methods, blueprint interpretation, and inspection methodologies.

• Experience with electronic troubleshooting, trend analysis, IPC-610/J-STD-001.

• Skilled with Microsoft Office, SharePoint, and database tools.

• Strong communication skills, a collaborative mindset, and a drive for results.

• Ability to pass required visual acuity and color vision exams.

Preferred Qualifications

• Experience in ISO 13485 and Nadcap environments.

• Lean or Six Sigma certification.

• Knowledge of military, commercial, or medical specifications.

Why Join Us

Here, your impact is tangible. You’ll play a pivotal role in elevating product quality and shaping continuous improvement across a dynamic manufacturing environment. The team values technical excellence, creativity, and accountability—and provides room for you to grow, lead, and make a lasting contribution.

You’ll be part of a culture built on trust, teamwork, and a dedication to producing products that exceed expectations every time.

Take the Next Step in Your Quality Career

If you thrive on complex challenges, excel in precision, and are motivated to lead impactful engineering initiatives, this is the role for you. Join a team that values innovation, collaboration, and continuous improvement—apply today!

This position requires use of information or access to facilities subject to the International Traffic in Arms Regulations (ITAR) and/or Export Administration Regulations (EAR). These regulations may limit access of controlled technologies: 1) to U.S. Persons, including U.S. Citizens, lawful permanent residents, and other narrow categories including refugees and asylees, or 2) to certain foreign nationals that have received an export license.         

• The California Fair Chance Act
• Los Angeles City Fair Chance Ordinance
• Los Angeles County Fair Chance Ordinance for Employers
• San Francisco Fair Chance Ordinance

Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

• Safely prepare and paint aircraft with minimal supervision, ensuring compliance with quality standards and FAA regulations.
• Use tools like dual-action sanders, hydraulic lifts, and paint sprayers, ensuring proper care and maintenance of all equipment.
• Work with sealants, paint strippers, and corrosion-preventive chemicals while adhering to safety guidelines and using the required protective equipment.
• Coordinate with supervisors and inspectors to ensure all work meets quality specifications and is fully documented in compliance with internal and FAA paperwork.
• Proactively address unsafe conditions and ensure all safety protocols are followed at all times.
• Contribute ideas to improve processes and participate in continuous improvement initiatives.
• Assist with aircraft movement and work closely with other team members to complete projects efficiently.

• High School Diploma or GED.
• 2+ years of experience in related paint processes, ideally in the aircraft industry.
• Valid driver’s license.
• Knowledge of paint processes and products, including lacquers, enamels, epoxies, urethanes, and acrylics.
• Ability to read and interpret blueprints and engineering documentation.
• Computer literacy.
• Ability to pass a Pulmonary Function Test for respirator certification.
• Ability to work in confined spaces, climb ladders, and lift up to 40 pounds.
• Ability to work any shift.

• Aircraft industry experience is highly preferred.
• Experience using material tracking systems and signing off on work.

• Join a skilled and passionate team that values your expertise and commitment to quality.
• Enjoy opportunities for career advancement and continuous learning in the exciting aerospace industry.
• Work in a culture where safety is our top priority, and we support each other to thrive in our roles.
• Your work directly contributes to the safety and success of aviation projects around the world.

• The California Fair Chance Act
• Los Angeles City Fair Chance Ordinance
• Los Angeles County Fair Chance Ordinance for Employers
• San Francisco Fair Chance Ordinance

Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Precision in Motion: Join Us as a CNC Machinist/Operator!

Location: Mountainhome, PA 18326
Job Type: Full-Time | 12-Month Contract
Schedule: Monday–Friday | 5x8-hour days | Overtime as needed
Pay Rate: $28.00/hour

Shape the Future of Aerospace Manufacturing

PDS Tech Commercial is partnering with a global leader in aerospace innovation to hire a CNC Machinist/Operator in Mountainhome, PA. This is your opportunity to join a team driving the next generation of flight technology. In this hands-on role, you’ll operate and set up CNC machinery to produce precision components that meet the industry’s highest standards of quality, accuracy, and reliability.

Your craftsmanship will directly contribute to building the advanced systems that keep the world’s most sophisticated aircraft soaring.

What You’ll Do

As a CNC Machinist/Operator, you will:

• Set up and operate CNC machines to produce high-quality, precision components. MUST HAVE: CNC Setup experience.

• Interpret blueprints, work orders, engineering plans, and GD&T requirements to ensure dimensional accuracy.

• Perform inspections, measurements, and quality checks using SPC charts and other control procedures.

• Adjust tools, speeds, and feeds to maintain optimal performance and precision.

• Maintain detailed records of work performed, ensuring compliance with quality and safety standards.

• Collaborate with engineering and production teams to recommend process improvements and enhance efficiency.

• Perform other duties as assigned to support production goals and continuous improvement efforts.

What You’ll Bring

Required Qualifications:

• High school diploma or GED required; vocational or technical education in a related field preferred.

• Minimum of 2 years of CNC Setup and machining experience.

• Proficiency in reading and interpreting blueprints, engineering drawings, and geometric dimensioning and tolerancing (GD&T).

• Strong attention to detail and commitment to producing quality work.

• Ability to work independently, solve problems, and take initiative in a fast-paced production environment.
  
  This position requires use of information or access to facilities subject to the International Traffic in Arms Regulations (ITAR) and/or Export Administration Regulations (EAR). These regulations may limit access of controlled technologies: 1) to U.S. Persons, including U.S. Citizens, lawful permanent residents, and other narrow categories including refugees and asylees, or 2) to certain foreign nationals that have received an export license.                                               
   

Preferred Skills:

• Experience in aerospace or precision manufacturing environments.

• Familiarity with SPC, advanced measuring instruments, and machine setup procedures.

• A strong focus on safety and continuous improvement.

Why Join Us

At PDS Tech Commercial, you’ll do more than operate machines — you’ll help build the technologies that define the future of flight. We value precision, innovation, and teamwork, offering a supportive environment where your skills make an immediate impact.

We offer:

• Competitive hourly pay and overtime opportunities.

• Hands-on experience with cutting-edge aerospace technology.

• A collaborative, safety-first culture focused on growth and excellence.

Take Your Career to New Heights

If you’re ready to apply your machining expertise to world-class aerospace projects, we want to hear from you.

Apply today to join PDS Tech Commercial as a CNC Machinist/Operator in Mountainhome, PA!

• The California Fair Chance Act
• Los Angeles City Fair Chance Ordinance
• Los Angeles County Fair Chance Ordinance for Employers
• San Francisco Fair Chance Ordinance

Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Craft the Future of Aviation – Join Our Exterior Finishing Team

PDS Tech Commercial is hiring for a client who’s a global leader in aviation, designing and servicing cutting-edge business jets and specialized mission platforms. If you’re skilled, passionate, and ready to make an impact, this is your opportunity to grow with a company that values diversity, authenticity, and talent.

Position: Exterior Finisher / Painter
Type: Full-Time, Contract
Location: Tucson, AZ
Pay Rate: $34 – $40/hr

Role Overview

As an Exterior Finisher / Painter, you’ll play a critical role in ensuring every aircraft looks and performs at its best. Your work will directly contribute to the quality and safety of high-end business jets, shaping the visual and functional excellence that defines our client’s reputation in aviation.

Day-to-Day Responsibilities

• Prepare aircraft surfaces and components for painting

• Apply primer, topcoat, and final finishes

• Polish and inspect surfaces to ensure flawless results

• Install sealant and erosion tape

• Document all work according to manuals and regulatory standards

• Follow safety, environmental, and quality procedures at all times

Qualifications

• 1+ year painting experience (aviation, automotive, or marine)

• Vocational training or equivalent experience

• Pulmonary Function test clearance for respirator use

• Basic PC skills and ability to read engineering drawings

• Knowledge of hazardous materials handling

• Strong communication, attention to detail, and teamwork skills

Why Join Us

• Work with a world-class aviation leader

• Be part of a team that values passion, skill, and professional growth

• Competitive pay and career development opportunities

• Dynamic, people-focused company culture

Ready to Build Something Remarkable?

If you have an eye for detail, a steady hand, and a passion for premium craftsmanship, we want to hear from you. Apply now to join the team crafting the future of flight—one aircraft at a time.

Apply Today and Let Your Skills Take Flight.

• The California Fair Chance Act
• Los Angeles City Fair Chance Ordinance
• Los Angeles County Fair Chance Ordinance for Employers
• San Francisco Fair Chance Ordinance

Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Human Resources System Analyst – Drive HR Technology Excellence in a Leading Aerospace Environment

PDS Tech Commercial is seeking a detail-oriented Human Resources System Analyst to support a leader in the aerospace industry. This full-time, onsite consulting role in Hazelwood, MO offers the opportunity to apply your HR systems expertise to high-impact projects that keep critical business operations running smoothly.

About the Role

In this role, you will serve as a subject matter expert for HR systems and processes, partnering closely with business teams to troubleshoot issues, manage system access, analyze data, and support audit activities. Your technical acuity and problem-solving abilities will directly enhance data integrity, user experience, and overall HR operational efficiency.

What You’ll Do

• Provide HR system and business process expertise to partners and internal teams
• Coordinate small-scale projects and collaborate with stakeholders to resolve issues
• Evaluate and process complex HR user access requests
• Assist with internal and external HR audits through detailed fact-finding
• Maintain and update process documentation for HR system applications
• Analyze data discrepancies to ensure accurate system usage and compliance
• Conduct system testing to validate functionality and data integrity
• Coordinate and execute large-volume HR transactions following established policies
• Create and run error queries to audit system activity and identify potential issues

Required Qualifications

• 2+ years of Workday experience
• Experience with Workday Security
• Strong proficiency with Excel and Worklife
• Background in HR systems analysis or HR operations
• Education or experience equivalent to a Bachelor’s degree with 6+ years of relevant work, or an advanced degree with 4+ years, or 10+ years of related professional experience

This position requires use of information or access to facilities subject to the International Traffic in Arms Regulations (ITAR) and/or Export Administration Regulations (EAR). These regulations may limit access of controlled technologies: 1) to U.S. Persons, including U.S. Citizens, lawful permanent residents, and other narrow categories including refugees and asylees, or 2) to certain foreign nationals that have received an export license.                                               

Preferred Qualifications

• Experience with Workday EIB (Enterprise Integration Builder) for mass updates
• Prior involvement in system testing, audits, or large-volume HR transactions
• Ability to analyze complex data and recommend effective resolutions

Why Join Us

At PDS Tech Commercial, we connect skilled professionals with meaningful opportunities in the aerospace sector. You’ll join a team that values integrity, collaboration, and excellence. As part of our network, you’ll receive dedicated support, competitive compensation, and the chance to make a measurable impact within a globally recognized aerospace organization.

Position Details

Location: Hazelwood, MO
Type: Full-time consultant role (6 months)
Schedule: Monday–Friday, 8:00 AM–4:30 PM (1st shift)
Pay starting at: $37.17 per hour

Take the Next Step

If you’re an analytical, systems-savvy HR professional ready to contribute to critical HR operations, we encourage you to apply today. Join PDS Tech Commercial and advance your career with a respected leader in aerospace technology.

• The California Fair Chance Act
• Los Angeles City Fair Chance Ordinance
• Los Angeles County Fair Chance Ordinance for Employers
• San Francisco Fair Chance Ordinance

Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.