Job Search Results

15 listings were found that matched your search words: Keywords: ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2024/05/10 Friday 04:23PM Pacific Time by ContractJobHunter. )

Listings 1 - 15
Go To My Job Tracker

Expand all descriptions

IMMEDIATE NEED - Electrical Engineer

Description:
Client would like to verify candidates have E3 development experience and experience developing EMI/EMC requirements, requirement flow down to subsystems, E3 control plans, design for E3 requirements, and hardware allocation planning.


THIS POSITION WILL REQUIRE CONTRACTOR TO HAVE EITHER A BS OR MS IN ELECTICAL ENGINERING ONLY. DEGREES IN OTHER ENGINEERING FIELDS WILL NOT BE CONSIDERED.

Seeking an E3 Engineer with Electromagnetic Compatibility and Interference (EMC/EMI) test experience to support multiple LOBs, including IAMD, AP/IAMD-AP, and TM:

• Design products to survive electromagnetic environmental effects,
• Develop requirements based on program requirements and physics rather than legacy program requirements,
• Ensure that designs meet system driven EMI/EMC requirements,
• Work in a multi-disciplined team of electrical, electro-mechanical, and mechanical engineers,
• Set up and conduct EMC tests in accordance with the MIL-STD-461 test standard.

• Required Experience/Skills:
o BSEE with a minimum of 8 years of E3 development experience
o MSEE with a minimum of 6 years of E3 development experience,
o Knowledge of MIL-STD-461 and MIL-STD-464,
o Experience developing EMI/EMC requirements, requirement flow down to subsystems, E3 control plans, design for E3 requirements, and hardware allocation planning,
o Minimum 4 years of EMC testing experience.
o experience with typical lab test equipment, such as spectrum analyzers, EMI receivers, network analyzers, signal generators, power meters, RF directional couplers, Oscilloscopes, AC/DC power supplies, and RF amplifiers.
o Must be familiar with ESD handling and prevention protocols.


• Desired Experience/Skills:
o Knowledge of E3 effects on military vehicles, fire control systems, missile systems, and munitions, including grounding, bonding, and shielding methods, designs to minimize radiated emissions and susceptibility, HIRF, HERO, and lightning effects, electromagnetic field coupling, Maxwell's equations, image charge/current, and lumped element modeling,
o Perform quantitative E3 analysis,
o Knowledge of electrical safety and military EMC compliance standards, requirements, and test methods
o Experience performing testing according to RTCA-DO-160 Sections 18-22,
o Experience with vulnerability characterization,
o Work experience in an ISO/IEC 17025 accredited laboratory,
o Able to assist with basic troubleshooting, basic interpretation, and analysis of test results,
o Proficiency in TILE!TM (ETS Lindgren EMC automation software) equipment scripts
o Preparation of test plans/procedures and reports

Candidate must have Ability to Obtain Secret Clearance. Not needed to start.
 
Job Location: Dallas, TX
Input Date: 05/06/2024
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: Valerie White
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Email: vwhite@teamglobal.com
Website: www.teamglobal.com

Structural Analysis-Stress/DADT/Dynamics/FEA/FEM

Description:
Uses computational methods and tools in a specialized field (strength of metallic and composite structures, finite element analysis, fatigue and damage tolerance, etc.). Performs pre-dimensioning computations by implementing analytical or digital computation methods and pass judgement on the credibility of the data received and the results obtained. Take part in drawing up the measurement plan applicable to the tests, and analyze the results. Required experience with structural mechanics simulation software including NASTRAN, PATRAN. Must be familiar with using UNIX computer systems. Familiarity and experience with other related tools such as CATIA V5 or Siemens NX desired. Must have knowledge and experience applying skills, tools, and judgment to the field of aircraft primary structure design. Experience analyzing aircraft subsystems and subsystem installations highly desired. Candidate must be capable of interpreting detail, assembly, and installation type drawings.

Required Minimum skills:
1. Airframe primary structure layout and sizing
2. Hand analysis of aerospace structures
3. NASTRAN and PATRAN
4. UNIX user experience

Familiarity with Slim, Vision, and IDAT a plus
 
Job Location: Fort Worth, TX
Input Date: 05/06/2024
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: Valerie White
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Email: vwhite@teamglobal.com
Website: www.teamglobal.com

Aeronautical Engineer

Description:
Creation and/or modification of primary and secondary structural parts, assemblies, installations, and interface control models/documents.
- Contributing to developing, testing, and validating aircraft structural dynamics analyses.
- Assisting in creating system requirements, trade studies, statements of work, and test plans.
- Coordination with internal Integrated Product Teams (IPTs), with some interaction with external IPTs and suppliers.

Basic Qualifications :
- Bachelor's degree in an engineering technical discipline such as Mechanical, Aerospace, or Aeronautical; 9 years experience with a Bachelor's Degree or 7 years with a Master's Degree
- Experience making/updating Finite Element Models (FEM) in Patran, Hypermesh, FEMAP, or similar
- Experience with running and interpreting Modal Analysis (SOL103), Random Vibration (SOL111), Transient Analysis (SOL112), Non-linear analysis (SOL106/400)
- Experience with developing vibration environments for aircraft (Mission Based Analysis) and maintaining Environment Criteria Documents (ECD)
- Experience with vibroacoustic and data processing
- Subsystem qualification experience (vendor testing, interpreting previous qualification data and making assessment to current predicted environments, delta qual, etc.)
- Proficient in scripting language (MatLab, Python, VBA, C++, etc.)
- Experience with documenting technical results and analysis and presenting to customers in an effective way

Desired skills :
- Proficient in MSC/Hexagon ADAMs for mechanism and landing gear
- Familiar with RCC-319
- Experience with structural analysis for preliminary sizing
 
Job Location: Palmdale, CA
Input Date: 05/06/2024
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: Valerie White
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Email: vwhite@teamglobal.com
Website: www.teamglobal.com

Aeronautical Engineer

Description:
Systems Engineer

Exp with metallic and composite design.

Check out our benefits:
Medical, Dental, Vision
401(k)
TG Rewards and more

Contact our Engineering Recruiter to learn more the this position and many more!
 
Job Location: Georgia
Input Date: 01/02/2024
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/234-9553
Email: gcpjobs@teamglobal.com
Website: www.teamglobal.com

Geospatial Engineer

Description:
Geospatial Engineer

Comprehensive knowledge of remote sensing and geographic information systems (GIS) technologies and data formats.

Check out our benefits:
Medical, Dental, Vision
401(k)
TG Rewards and more

Contact our Engineering Recruiter to learn more the this position and many more!
 
Job Location: North Carolina
Input Date: 01/02/2024
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/234-9553
Email: gcpjobs@teamglobal.com
Website: www.teamglobal.com

Safety Engineer

Description:
Safety Engineer

Participate in accident investigation involving damage to products or related facilities and assists in identification of causes and corrective actions.

Check out our benefits:
Medical, Dental, Vision
401(k)
TG Rewards and more

Contact our Engineering Recruiter to learn more the this position and many more!
 
Job Location: Texas
Input Date: 01/02/2024
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/234-9553
Email: gcpjobs@teamglobal.com
Website: www.teamglobal.com

Systems Integration/Test Engineer

Description:
Safety Engineer

Exp integrating closed loop systems, exp with GitLab and HWIL systems.

Check out our benefits:
Medical, Dental, Vision
401(k)
TG Rewards and more

Contact our Engineering Recruiter to learn more the this position and many more!
 
Job Location: Texas
Input Date: 01/02/2024
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/234-9553
Email: gcpjobs@teamglobal.com
Website: www.teamglobal.com

Weights & Mass Properties Engineer

Description:
Develops complex weight, balance and mass properties data. Determines approaches to developing data and analyzes and compares results. Defines complex weight, balance and mass properties related design requirements. Participates in developing customer specification commitments. Provides complex vehicle or system configuration guidance. Leads individual design team weight control efforts. Estimates, calculates and measures and verifies mass, weight, stiffness and inertias of components, assemblies and completed vehicles or systems. Develops and maintains weight, balance and mass properties accounting systems and generates weight and balance reports. Creates, develops and implements new processes and tools to facilitate improved design and analysis capabilities. Works under general direction.

Seeking a Mid-Level Weight and Mass Properties Engineer to join the Flight Systems Capability team in Oklahoma City, OK, with the opportunity to provide engineering and technical decisions for Boeing Military Aircraft (B-2, B-52), Military Derivative Aircraft (AEW&C (737), AWACS (707, 767), ETS&S(C-32/C-40, E-4B, VC-25A, VC-25B), Tankers (KC-135, KC-767)) and other diverse aircraft and projects!

The Mass Properties team is looking for an individual with experience in aircraft weight and balance analysis. In addition, this position will require the ability to comprehend contract statement of work requirements, define task execution details, estimate task durations, and schedule and monitor team task execution.

Regular and predictable attendance is required.

Position Responsibilities:

Develop complex weight, balance and mass properties data

Determine approaches to developing data and analyses and comparing results

Participate in developing program and customer specification requirements

Estimate, calculate and measure and verify mass, weight, stiffness and inertias of components, assemblies and completed vehicles or systems

Develop and maintain weight, balance and mass properties accounting systems and generate weight and balance reports

This position is hybrid. This means that the selected candidate will be required to perform some work onsite (at least two days per week) at the listed location. This is at the hiring team’s discretion and could potentially change in the future.


Basic Qualifications (Required Skills/Experience):

Bachelor's, Master's or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry

3+ years of experience in weights and mass properties engineering

Experience using CATIA or similar design modeling tool

Preferred Qualifications (Desired Skills/Experience):

5 or more years' related work experience or an equivalent combination of education and experience

Aircraft weight and balance report generation

Understanding of Boeing commercial derivative aircraft (707, 737, 747, 757, 777, 787) or similar platform interior compartments and standard aircraft primary/secondary hardware and aircraft system components

Large aircraft weighing experience

CATIA V5/V6 experience

Aircraft control surface weighing experience

PC platform computer skills is highly desired, especially with Excel and Word

Possess good interpersonal communication skills (written & verbal) in a team-oriented environment

Experience leading teams or projects

Ability to interact professionally with customer, supplier, field & production representatives
 
Job Location: Fort Worth, TX
Input Date: 05/06/2024
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: Valerie White
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Email: vwhite@teamglobal.com
Website: www.teamglobal.com

Simulation Design Engineer

Description:
Team is seeking an experienced Fighter Pilot or Weapon Systems Officer (WSO) to support requirements development, integration, and testing for aircrew training devices/simulators across several platforms to include F-15, F/A-18, EA-18G, MQ-25, T-7, and T-45 in Berkeley, MO and/or Hazelwood, MO. In order to be considered for this position, a candidate Subject Matter Expert (SME) must have experience as a Pilot or WSO in high-performance 4th and/or 5th Gen combat jet aircraft.

Position Responsibilities:
· The successful candidate will work independently and will assist other members of the team in the performance of day-to-day operations in a fast-paced development environment.
· Team members create requirements and verification test procedures and execute testing to ensure the training devices correctly simulate the respective fighter/training aircraft, weapon systems, and the operational environment.
· Off shift and weekend work may be occasionally required to meet contractual milestones, objectives, and delivery schedules.
· Occasional domestic or international travel will be required.
· This is a mid-level to senior grade position.
· While waiting for security clearance, SME candidates will work with the Systems Engineering teams to familiarize with the training devices and processes, and in addition, they will instruct other engineers on how to decipher technical orders and aircrew academics.


Basic Qualifications (Required Skills/Experience):
· Experience flying in 4th and/or 5th Generation fighter jet aircraft within the last 6 years.
· Ability to travel domestically and internationally.
· Ability to work flexible hours, overtime, and occasional weekends as necessary.
· Technical STEM bachelor’s degree or higher.

Preferred Qualifications (Desired Skills/Experience):
· Active U.S. Secret Clearance or higher.
· Experience in an aircraft test environment.

Typical Education/ Experience:
Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 9 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+4 years' related work experience, Master+7 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.
 
Job Location: Berkeley, MO
Input Date: 05/06/2024
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: Valerie White
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Email: vwhite@teamglobal.com
Website: www.teamglobal.com

Project Manager

Description:
Job Description: ***Project Manager for Cape Canaveral, FL location***
Oversees and manages the operational aspects of ongoing projects and serves as liaison between project management and planning project team and line management. Reviews status of projects and budgets; manages schedules and prepares status reports. assesses project issues and develops resolutions to meet productivity quality and client-satisfaction goals and objectives. Develops mechanisms for monitoring project progress and for intervention and problem solving with project mangers line mangers and clients.

Basic qualifications
- Has managed multiple IT projects simultaneously
- Has managed a big IT project
- Has worked with various groups and organization to execute a project
- Budget management
- Develop and manage a schedule

Desired
- PMP Certified
- 5+ years’ experience
 
Job Location: Cape Canaveral, FL
Input Date: 05/06/2024
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: Valerie White
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Email: vwhite@teamglobal.com
Website: www.teamglobal.com

Design Engineer

Description:
Job Description: Incorporate Engineering Change Notices on F-16 drawings, models and parts lists to reflect customer generated design changes. Perform miscellaneous engineering related work for design groups. The position requires a working knowledge of general drafting practices and the ability to interpret engineering design drawings, computer models and related engineering bill of materials. Requires a working knowledge of both 2D and 3D with a computer-aided design system including solid modeling knowledge. Knowledge of Geometric Dimensioning and Tolerancing based on ASME Y14.5 along with knowledge of ASME Y14.100 Engineering Drawing Practices is preferred. This position requires very detail oriented approach with efficient planning, communication and organization skills required. Successful candidate must have the ability to work in a fast paced team environment where critical schedules are common and must be met with quality results.

Basic Qualifications:
- STEM degree Engineering degree preferred
- CATIA V4 or V5 experience
- Experience with Geometric Dimensioning and Tolerancing (GD&T)
- Prior experience reading and interpreting engineering drawings
- Prior experience incorporating Engineering Change Notice (ECN) into drawings

Desired Skills:
- CATIA V5
- Previous experience with F-16 or F-22 Engineering Drawings
- MPRSII and EDFS system experience.
- Experience with retrofit/service action and multiple type/version effectivities.
- Five plus years of experience in Engineering Checking.
- Prior experience with Engineering change processes and change orders.
- Very detail oriented with good verbal and written communication skills.
 
Job Location: Fort Worth, TX
Input Date: 05/06/2024
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: Valerie White
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Email: vwhite@teamglobal.com
Website: www.teamglobal.com

Electrical Power Engineer

Description:
Electrical Power Engineer

Designs power system architectures based on top-level reqs.


Check out our benefits:
Medical, Dental, Vision
401(k)
TG Rewards and more

Contact our Engineering Recruiter to learn more the this position and many more!
 
Job Location: California
Input Date: 01/02/2024
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/234-9553
Email: gcpjobs@teamglobal.com
Website: www.teamglobal.com

Software Engineer

Description:
Software Engineer

Exp with GUI development using Lua, OpenGL, and/or Direct3D.

Check out our benefits:
Medical, Dental, Vision
401(k)
TG Rewards and more

Contact our Engineering Recruiter to learn more the this position and many more!
 
Job Location: California
Input Date: 01/02/2024
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/234-9553
Email: gcpjobs@teamglobal.com
Website: www.teamglobal.com

Structural Analysis

Description:
Structural Analysis

Stress/DADT/Dynamics/FEA/FEM – Exp with creating detailed Finite Element Models

Check out our benefits:
Medical, Dental, Vision
401(k)
TG Rewards and more

Contact our Engineering Recruiter to learn more the this position and many more!
 
Job Location: California
Input Date: 01/02/2024
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/234-9553
Email: gcpjobs@teamglobal.com
Website: www.teamglobal.com

Systems Engineer

Description:
Systems Engineer

Design of HWIL subsystems including electrical diagrams.

Check out our benefits:
Medical, Dental, Vision
401(k)
TG Rewards and more

Contact our Engineering Recruiter to learn more the this position and many more!
 
Job Location: Florida
Input Date: 01/02/2024
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/234-9553
Email: gcpjobs@teamglobal.com
Website: www.teamglobal.com
Back to Advanced Job Search